11 years agoALSA: wss_lib: use wss mixer code instead of ad1848 one
Krzysztof Helt [Thu, 31 Jul 2008 19:08:32 +0000]
ALSA: wss_lib: use wss mixer code instead of ad1848 one

Use the wss mixer code and kill the ad1848 mixer code.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Reviewed-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: wss_lib: use CS4231P instead of AD1848P (kill the AD1848P)
Krzysztof Helt [Thu, 31 Jul 2008 19:07:30 +0000]
ALSA: wss_lib: use CS4231P instead of AD1848P (kill the AD1848P)

Use CS4231P instead of AD1848P (kill the AD1848P).

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Reviewed-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: wss_lib: replace ad1848 mixer element macros with wss ones
Krzysztof Helt [Thu, 31 Jul 2008 19:06:46 +0000]
ALSA: wss_lib: replace ad1848 mixer element macros with wss ones

Use the wss macros instead of ad1848 ones.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Reviewed-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: wss_lib: use wss constants instead of ad1848 ones
Krzysztof Helt [Thu, 31 Jul 2008 19:05:44 +0000]
ALSA: wss_lib: use wss constants instead of ad1848 ones

Use wss constants for mode.
Move ad1848 hardware constants to the wss.h.
Move mixer tlv macros into the ad1848_lib.c from the ad1848.h.

Drop the MODE_RUNNING spurious IRQ guard on AD1848 as it doesn not seem
to be needed.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Reviewed-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: wss_lib: use struct snd_wss instead of snd_ad1848
Krzysztof Helt [Thu, 31 Jul 2008 19:04:37 +0000]
ALSA: wss_lib: use struct snd_wss instead of snd_ad1848

The snd_wss is superset of the snd_ad1848 so kill
the latter and replace it with the snd_wss.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Reviewed-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: wss_lib: rename cs4321_foo to wss_foo
Krzysztof Helt [Thu, 31 Jul 2008 19:03:41 +0000]
ALSA: wss_lib: rename cs4321_foo to wss_foo

Rename functions and structures from the former
cs4321_lib to names more corresponding with the
new name: wss_lib.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Reviewed-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: wss_lib: rename cs4231.h into wss.h
Krzysztof Helt [Thu, 31 Jul 2008 19:02:42 +0000]
ALSA: wss_lib: rename cs4231.h into wss.h

Rename file include/sound/cs4231.h
into include/sound/wss.h

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Reviewed-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: wss_lib: move cs4231_lib into wss_lib
Krzysztof Helt [Thu, 31 Jul 2008 19:00:17 +0000]
ALSA: wss_lib: move cs4231_lib into wss_lib

Move the file sound/isa/cs423x/cs4231_lib.c
into sound/isa/cs423x/wss_lib.c
This is the first step toward merging all libraries
for Windows Sound System compatible chips
into a single library.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Reviewed-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: ice1724 - Support for Terrasoniq/MUSONIK TS22 PCI card
Misha Zhilin [Fri, 1 Aug 2008 10:45:14 +0000]
ALSA: ice1724 - Support for Terrasoniq/MUSONIK TS22 PCI card

Added support for Terrasoniq/MUSONIK TS22 PCI card.

Signed-off-by: Misha Zhilin <misha@epiphan.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: Fix limit of 8 PCM devices in SNDRV_CTL_IOCTL_PCM_NEXT_DEVICE
Pawel MOLL [Wed, 30 Jul 2008 11:46:40 +0000]
ALSA: Fix limit of 8 PCM devices in SNDRV_CTL_IOCTL_PCM_NEXT_DEVICE

When compiled with CONFIG_SND_DYNAMIC_MINORS the ALSA core is fine
to have more than 8 PCM devices per card, except one place - the
SNDRV_CTL_IOCTL_PCM_NEXT_DEVICE ioctl, which will not enumerate
devices > 7. This patch fixes the issue, changing the devices list
organisation.

Instead of adding new device to the tail, the list is now kept always
ordered (by card number, then device number). Thus, during enumeration,
it is easy to discover the fact that there is no more given card's
devices.

Additionally the device field of struct snd_pcm had to be changed to int,
as its "unsignednity" caused a lot of problems when comparing it to
potentially negative signed values. (-1 is 0xffffffff or even more then ;-)

Signed-off-by: Pawel Moll <pawel.moll@st.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: Add USB US122L driver
Karsten Wiese [Wed, 30 Jul 2008 13:13:29 +0000]
ALSA: Add USB US122L driver

Added a new US122L usb-audio driver.  This driver works together with a
dedicated alsa-lib plugin.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agosound: Revert "ALSA: Fix limit of 8 PCM devices in SNDRV_CTL_IOCTL_PCM_NEXT_DEVICE"
Jaroslav Kysela [Fri, 1 Aug 2008 11:36:04 +0000]
sound: Revert "ALSA: Fix limit of 8 PCM devices in SNDRV_CTL_IOCTL_PCM_NEXT_DEVICE"

This reverts commit fb3d6f2b77bdec75d45aa9d4464287ed87927866.

New, updated patch with same subject replaces this commit.

Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: IEC958 definition for consumer status channel update
Pawel MOLL [Fri, 1 Aug 2008 10:23:44 +0000]
ALSA: IEC958 definition for consumer status channel update

Updated IEC958 consumer status channel definitions according
to the third edition of IEC60958-3 spec.

Signed-off-by: Pawel Moll <pawel.moll@st.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: Fix limit of 8 PCM devices in SNDRV_CTL_IOCTL_PCM_NEXT_DEVICE
Pawel MOLL [Tue, 29 Jul 2008 16:34:26 +0000]
ALSA: Fix limit of 8 PCM devices in SNDRV_CTL_IOCTL_PCM_NEXT_DEVICE

When compiled with CONFIG_SND_DYNAMIC_MINORS the ALSA core is fine
to have more than 8 PCM devices per card, except one place - the
SNDRV_CTL_IOCTL_PCM_NEXT_DEVICE ioctl, which will not enumerate
devices > 7. This patch fixes the issue, changing the devices list
organisation.

Instead of adding new device to the tail, the list is now kept always
ordered (by card number, then device number). Thus, during enumeration,
it is easy to discover the fact that there is no more given card's
devices. The same limit was present in OSS emulation code. It has
been fixed as well.

Additionally the device field of struct snd_pcm is now int, instead of
unsigned int, as there is no obvious reason for keeping it unsigned.
This caused a lot of problems with comparing this value with other
(almost always signed) variables. There is just one more place where
device number is unsigned - in struct snd_pcm_info, which should be
also sorted out in future.

Signed-off-by: Pawel MOLL <pawel.moll@st.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: ASoC: convert use of uint to unsigned int
Jon Smirl [Tue, 29 Jul 2008 14:22:24 +0000]
ALSA: ASoC: convert use of uint to unsigned int

ASOC: convert use of uint to unsigned int

Signed-off-by: Jon Smirl <jonsmirl@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: ASoC: Add all CODECs Kconfig option
Mark Brown [Tue, 29 Jul 2008 10:42:35 +0000]
ALSA: ASoC: Add all CODECs Kconfig option

Allow all the CODEC drivers to be built without a machine driver in order
to facilitate testing of subsystem-wide changes and gain better coverage
from automated testing efforts. This also helps things like the generic
OpenFirmware machine driver for PowerPC.

Currently AC97 CODECs are not included since the current setup relies
on having a controller driver available.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: ASoC: AD1980 audio codec driver
Cliff Cai [Tue, 29 Jul 2008 10:42:34 +0000]
ALSA: ASoC: AD1980 audio codec driver

[Mechanical updates from code review applied -- broonie]

Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: ASoC: Staticise keyclick dev_attr in tlv320aic26
Mark Brown [Tue, 29 Jul 2008 10:42:33 +0000]
ALSA: ASoC: Staticise keyclick dev_attr in tlv320aic26

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: ASoC: Export DAI and codec for TLV320AIC26
Mark Brown [Tue, 29 Jul 2008 10:42:32 +0000]
ALSA: ASoC: Export DAI and codec for TLV320AIC26

This fixes sparse warnings and allows non-OpenFirmware systems to attempt
to bind to the device.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: ASoC: Add Texas Instruments TLV320AIC26 codec driver
Grant Likely [Tue, 29 Jul 2008 10:42:31 +0000]
ALSA: ASoC: Add Texas Instruments TLV320AIC26 codec driver

ASoC Codec driver for the TLV320AIC26 device.  As it stands, this driver
doesn't support all the modes and clocking options of the AIC16, but it
is a start.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: ASoC: Add mpc5200-psc I2S driver
Grant Likely [Tue, 29 Jul 2008 10:42:30 +0000]
ALSA: ASoC: Add mpc5200-psc I2S driver

This is an I2S bus driver for the MPC5200 PSC device.  It depends on the
soc-of helper functions to match a PSC device with a codec based on data
in the device tree.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: ASoC: Make OpenFirmware helper include file conditional
Mark Brown [Tue, 29 Jul 2008 10:42:29 +0000]
ALSA: ASoC: Make OpenFirmware helper include file conditional

The OpenFirmware API headers don't build on all platforms so ensure
that they are not included unless they are being used.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: ASoC: Add OpenFirmware helper for matching bus and codec drivers
Grant Likely [Tue, 29 Jul 2008 10:42:28 +0000]
ALSA: ASoC: Add OpenFirmware helper for matching bus and codec drivers

Simple utility layer for creating ASoC machine instances based on data
in the OpenFirmware device tree.  OF aware platform drivers and codec
drivers register themselves with this framework and the framework
automatically instantiates a machine driver.  At the moment, the driver
is not very capable and it is expected to be extended as more features
are needed for specifying the configuration in the device tree.

This is most likely temporary glue code to work around limitations in
the ASoC v1 framework.  When v2 is merged, most of this driver will
need to be reworked.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: ASoC: Rename mask to max to reflect usage
Jon Smirl [Tue, 29 Jul 2008 10:42:27 +0000]
ALSA: ASoC: Rename mask to max to reflect usage

Most of the ASoC controls refer to the maximum value that can be set for
a control as mask but there is no actual requirement for all bits to be
set at the highest possible value making the name mask misleading.
Change the code to use max instead.

Signed-off-by: Jon Smirl <jonsmirl@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: ASoC: Convert bitfields in ASoC into full int width
Jon Smirl [Tue, 29 Jul 2008 10:42:26 +0000]
ALSA: ASoC: Convert bitfields in ASoC into full int width

Convert bitfields in ASoC into full int width. This is a
simple mechanical conversion. Two places in the DAPM code
were fixed to properly use mask.

Signed-off-by: Jon Smirl <jonsmirl@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: ASoC: Allow codecs to override register display
Mark Brown [Tue, 29 Jul 2008 10:42:25 +0000]
ALSA: ASoC: Allow codecs to override register display

Some codecs have unusual features in their register maps such as very
large registers representing arrays of coefficients. Support these
codecs in the register cache sysfs file by allowing them to provide a
function register_display() overriding the default output for register
contents.

Also ensure that we don't overflow PAGE_SIZE while writing out the
register dump.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: ASoC: Permit simultaneous compilation of both PXA AC97 drivers
Dmitry Baryshkov [Tue, 29 Jul 2008 10:42:24 +0000]
ALSA: ASoC: Permit simultaneous compilation of both PXA AC97 drivers

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: hda - use input_free_device()
Takashi Iwai [Tue, 29 Jul 2008 10:08:16 +0000]
ALSA: hda - use input_free_device()

Use input_free_devce() correctly instead of kfree() at error path.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: Build jack detection
Mark Brown [Mon, 28 Jul 2008 18:05:36 +0000]
ALSA: Build jack detection

Since jack detection requires the input subsystem which may not be
desired on small systems it is not built unless required by a driver
that is being built. Drivers using jack detection should use a pattern
like this:

config SND_FOO
        tristate "..."
        ...
        select SND_JACK if INPUT=y || INPUT=SND

to ensure that the jack detection API is enabled if the input subsystem
is.  If the input subsystem is not enabled then a stub version of the
API is provided.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: Add jack reporting API
Mark Brown [Mon, 28 Jul 2008 18:05:35 +0000]
ALSA: Add jack reporting API

Currently very few systems provide information about jack status to user
space, even though many have hardware facilities to do detection. Those
systems that do use an input device with the existing SW_HEADPHONE_INSERT
switch type to do so, often independently of ALSA.

This patch introduces a standard method for representing jacks to user
space into ALSA. It allows drivers to register jacks for a sound card with
the input subsystem, binding the input device to the card to help user
space associate the input devices with their sound cards. The created
input devices are named in the form "card longname jack" where jack is
provided by the driver when allocating a jack. By default the parent for
the input device is the sound card but this can be overridden by the
card driver.

The existing user space API with SW_HEADPHONE_INSERT is preserved.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: Fix commit: Add automatic model setting for the Acer Aspire 5920G laptop
Jaroslav Kysela [Mon, 28 Jul 2008 15:07:07 +0000]
ALSA: Fix commit: Add automatic model setting for the Acer Aspire 5920G laptop

There is a whitespace at the end of added line. Remove it.

Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: hda: added 92HD81/83 support
Matthew Ranostay [Sun, 27 Jul 2008 08:30:30 +0000]
ALSA: hda: added 92HD81/83 support

Added support for 92HD81/83 family of codecs.
This also includes a pwr_mapping array for pins that have more than
one amp to power down.

Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: usb-audio: add BOSS GT-10 support
Clemens Ladisch [Mon, 28 Jul 2008 08:19:39 +0000]
ALSA: usb-audio: add BOSS GT-10 support

Add a quirk entry for the BOSS GT-10.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>

11 years agoALSA: hda: digital pc-beep support hd-audio codecs
Matthew Ranostay [Fri, 18 Jul 2008 16:20:52 +0000]
ALSA: hda: digital pc-beep support hd-audio codecs

Added digital pc-beep support using linear tone generation for hd-codecs along
with initial support for several IDT codecs.

Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoALSA: re-order AC97 codec ID table.
Rene Herman [Tue, 15 Jul 2008 14:24:50 +0000]
ALSA: re-order AC97 codec ID table.

Signed-off-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

11 years agoLinux 2.6.27
Linus Torvalds [Thu, 9 Oct 2008 22:13:53 +0000]
Linux 2.6.27

11 years agoDon't allow splice() to files opened with O_APPEND
Linus Torvalds [Thu, 9 Oct 2008 21:04:54 +0000]
Don't allow splice() to files opened with O_APPEND

This is debatable, but while we're debating it, let's disallow the
combination of splice and an O_APPEND destination.

It's not entirely clear what the semantics of O_APPEND should be, and
POSIX apparently expects pwrite() to ignore O_APPEND, for example.  So
we could make up any semantics we want, including the old ones.

But Miklos convinced me that we should at least give it some thought,
and that accepting writes at arbitrary offsets is wrong at least for
IS_APPEND() files (which always have O_APPEND set, even if the reverse
isn't true: you can obviously have O_APPEND set on a regular file).

So disallow O_APPEND entirely for now.  I doubt anybody cares, and this
way we have one less gray area to worry about.

Reported-and-argued-for-by: Miklos Szeredi <miklos@szeredi.hu>
Acked-by: Jens Axboe <ens.axboe@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoMerge branch 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6
Linus Torvalds [Thu, 9 Oct 2008 19:23:54 +0000]
Merge branch 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6

* 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
  hwmon: (abituguru3) Enable DMI probing feature on Abit AT8 32X
  hwmon: (abituguru3) Enable reading from AUX3 fan on Abit AT8 32X
  hwmon: (adt7473) Fix some bogosity in documentation file
  hwmon: Define sysfs interface for energy consumption register
  hwmon: (it87) Prevent power-off on Shuttle SN68PT
  eeepc-laptop: Fix hwmon interface

11 years agoMerge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq
Linus Torvalds [Thu, 9 Oct 2008 19:23:35 +0000]
Merge branch 'fixes' of git://git./linux/kernel/git/davej/cpufreq

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ] correct broken links and email addresses

11 years agoSLOB: fix bogus ksize calculation fix
Matt Mackall [Wed, 8 Oct 2008 19:51:57 +0000]
SLOB: fix bogus ksize calculation fix

This fixes the previous fix, which was completely wrong on closer
inspection. This version has been manually tested with a user-space
test harness and generates sane values. A nearly identical patch has
been boot-tested.

The problem arose from changing how kmalloc/kfree handled alignment
padding without updating ksize to match. This brings it in sync.

Signed-off-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years ago[CPUFREQ] correct broken links and email addresses
Németh Márton [Thu, 9 Oct 2008 12:59:17 +0000]
[CPUFREQ] correct broken links and email addresses

Replace the no longer working links and email address in the
documentation and in source code.

Signed-off-by: Márton Németh <nm127@freemail.hu>
Signed-off-by: Dave Jones <davej@redhat.com>

11 years agohwmon: (abituguru3) Enable DMI probing feature on Abit AT8 32X
Alistair John Strachan [Thu, 9 Oct 2008 13:33:59 +0000]
hwmon: (abituguru3) Enable DMI probing feature on Abit AT8 32X

Enable driver checking of the DMI product name (when enabled) on
an Abit AT8 32X, instead of falling back to a manual probe. This
eliminates false negatives and eventually will help avoid
unnecessary bus probes on unsupported mainboards.

Signed-off-by: Alistair John Strachan <alistair@devzero.co.uk>
Tested-by: Daniel Exner <dex@dragonslave.de>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

11 years agohwmon: (abituguru3) Enable reading from AUX3 fan on Abit AT8 32X
Alistair John Strachan [Thu, 9 Oct 2008 13:33:59 +0000]
hwmon: (abituguru3) Enable reading from AUX3 fan on Abit AT8 32X

The table for the Abit AT8 32X was incorrectly missing an entry
for the sixth ("AUX3") fan. Add this entry, exporting the fan
reading to userspace.

Closes lm-sensors.org ticket #2339.

Signed-off-by: Alistair John Strachan <alistair@devzero.co.uk>
Tested-by: Daniel Exner <dex@dragonslave.de>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

11 years agohwmon: (adt7473) Fix some bogosity in documentation file
Darrick J. Wong [Thu, 9 Oct 2008 13:33:58 +0000]
hwmon: (adt7473) Fix some bogosity in documentation file

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

11 years agohwmon: Define sysfs interface for energy consumption register
Darrick J. Wong [Thu, 9 Oct 2008 13:33:58 +0000]
hwmon: Define sysfs interface for energy consumption register

Describe the sysfs files that were introduced in the ibmaem driver.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

11 years agohwmon: (it87) Prevent power-off on Shuttle SN68PT
Jean Delvare [Thu, 9 Oct 2008 13:33:58 +0000]
hwmon: (it87) Prevent power-off on Shuttle SN68PT

On the Shuttle SN68PT, FAN_CTL2 is apparently not connected to a fan,
but to something else. One user has reported instant system power-off
when changing the PWM2 duty cycle, so we disable it.

I use the board name string as the trigger in case the same board is
ever used in other systems.

This closes lm-sensors ticket #2349:
pwmconfig causes a hard poweroff
http://www.lm-sensors.org/ticket/2349

Signed-off-by: Jean Delvare <khali@linux-fr.org>

11 years agoeeepc-laptop: Fix hwmon interface
Corentin Chary [Thu, 9 Oct 2008 13:33:57 +0000]
eeepc-laptop: Fix hwmon interface

Creates a name file in the sysfs directory, that
is needed for the libsensors library to work.
Also rename fan1_pwm to pwm1 and scale its value as needed.

This fixes bug #11520:
http://bugzilla.kernel.org/show_bug.cgi?id=11520

Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

11 years agoMerge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
Linus Torvalds [Wed, 8 Oct 2008 18:41:10 +0000]
Merge branch 'upstream' of git://ftp.linux-mips.org/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] Sibyte: Register PIO PATA device only for Swarm and Litte Sur

11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Wed, 8 Oct 2008 18:40:19 +0000]
Merge git://git./linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  tcp: Fix tcp_hybla zero congestion window growth with small rho and large cwnd.
  net: Fix netdev_run_todo dead-lock
  tcp: Fix possible double-ack w/ user dma
  net: only invoke dev->change_rx_flags when device is UP
  netrom: Fix sock_orphan() use in nr_release
  ax25: Quick fix for making sure unaccepted sockets get destroyed.
  Revert "ax25: Fix std timer socket destroy handling."
  [Bluetooth] Add reset quirk for A-Link BlueUSB21 dongle
  [Bluetooth] Add reset quirk for new Targus and Belkin dongles
  [Bluetooth] Fix double frees on error paths of btusb and bpa10x drivers

11 years ago[MIPS] Sibyte: Register PIO PATA device only for Swarm and Litte Sur
Ralf Baechle [Wed, 8 Oct 2008 18:14:33 +0000]
[MIPS] Sibyte: Register PIO PATA device only for Swarm and Litte Sur

Symbol name spaghetti which is too complicated to cleanup on this stage
of the release cycle breaks the build on BCM1480 platforms.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

11 years agotcp: Fix tcp_hybla zero congestion window growth with small rho and large cwnd.
Daniele Lacamera [Tue, 7 Oct 2008 22:58:17 +0000]
tcp: Fix tcp_hybla zero congestion window growth with small rho and large cwnd.

Because of rounding, in certain conditions, i.e. when in congestion
avoidance state rho is smaller than 1/128 of the current cwnd, TCP
Hybla congestion control starves and the cwnd is kept constant
forever.

This patch forces an increment by one segment after #send_cwnd calls
without increments(newreno behavior).

Signed-off-by: Daniele Lacamera <root@danielinux.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agonet: Fix netdev_run_todo dead-lock
Herbert Xu [Tue, 7 Oct 2008 22:50:03 +0000]
net: Fix netdev_run_todo dead-lock

Benjamin Thery tracked down a bug that explains many instances
of the error

unregister_netdevice: waiting for %s to become free. Usage count = %d

It turns out that netdev_run_todo can dead-lock with itself if
a second instance of it is run in a thread that will then free
a reference to the device waited on by the first instance.

The problem is really quite silly.  We were trying to create
parallelism where none was required.  As netdev_run_todo always
follows a RTNL section, and that todo tasks can only be added
with the RTNL held, by definition you should only need to wait
for the very ones that you've added and be done with it.

There is no need for a second mutex or spinlock.

This is exactly what the following patch does.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/holtmann/bluet...
David S. Miller [Tue, 7 Oct 2008 22:32:20 +0000]
Merge branch 'master' of git://git./linux/kernel/git/holtmann/bluetooth-2.6

11 years agotcp: Fix possible double-ack w/ user dma
Ali Saidi [Tue, 7 Oct 2008 22:31:19 +0000]
tcp: Fix possible double-ack w/ user dma

From: Ali Saidi <saidi@engin.umich.edu>

When TCP receive copy offload is enabled it's possible that
tcp_rcv_established() will cause two acks to be sent for a single
packet. In the case that a tcp_dma_early_copy() is successful,
copied_early is set to true which causes tcp_cleanup_rbuf() to be
called early which can send an ack. Further along in
tcp_rcv_established(), __tcp_ack_snd_check() is called and will
schedule a delayed ACK. If no packets are processed before the delayed
ack timer expires the packet will be acked twice.

Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agonet: only invoke dev->change_rx_flags when device is UP
Patrick McHardy [Tue, 7 Oct 2008 22:26:48 +0000]
net: only invoke dev->change_rx_flags when device is UP

Jesper Dangaard Brouer <hawk@comx.dk> reported a bug when setting a VLAN
device down that is in promiscous mode:

When the VLAN device is set down, the promiscous count on the real
device is decremented by one by vlan_dev_stop(). When removing the
promiscous flag from the VLAN device afterwards, the promiscous
count on the real device is decremented a second time by the
vlan_change_rx_flags() callback.

The root cause for this is that the ->change_rx_flags() callback is
invoked while the device is down. The synchronization is meant to mirror
the behaviour of the ->set_rx_mode callbacks, meaning the ->open function
is responsible for doing a full sync on open, the ->close() function is
responsible for doing full cleanup on ->stop() and ->change_rx_flags()
is meant to do incremental changes while the device is UP.

Only invoke ->change_rx_flags() while the device is UP to provide the
intended behaviour.

Tested-by: Jesper Dangaard Brouer <jdb@comx.dk>

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agoSLOB: fix bogus ksize calculation
Matt Mackall [Tue, 7 Oct 2008 16:37:35 +0000]
SLOB: fix bogus ksize calculation

SLOB's ksize calculation was braindamaged and generally harmlessly
underreported the allocation size. But for very small buffers, it could
in fact overreport them, leading code depending on krealloc to overrun
the allocation and trample other data.

Signed-off-by: Matt Mackall <mpm@selenic.com>
Tested-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoRevert "V4L/DVB (8904): cx88: add missing unlock_kernel"
Linus Torvalds [Tue, 7 Oct 2008 14:54:34 +0000]
Revert "V4L/DVB (8904): cx88: add missing unlock_kernel"

This reverts commit 135aedc38e812b922aa56096f36a3d72ffbcf2fb, as
requested by Hans Verkuil.

It was a patch for 2.6.28 where the BKL was pushed down from v4l core to
the drivers, not for 2.6.27!

Requested-by: Hans Verkuil <hverkuil@xs4all.nl>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-of-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoLinux 2.6.27-rc9
Linus Torvalds [Mon, 6 Oct 2008 23:39:58 +0000]
Linux 2.6.27-rc9

11 years agoMarker depmod fix core kernel list
Mathieu Desnoyers [Mon, 6 Oct 2008 13:30:12 +0000]
Marker depmod fix core kernel list

* Theodore Ts'o (tytso@mit.edu) wrote:
>
> I've been playing with adding some markers into ext4 to see if they
> could be useful in solving some problems along with Systemtap.  It
> appears, though, that as of 2.6.27-rc8, markers defined in code which is
> compiled directly into the kernel (i.e., not as modules) don't show up
> in Module.markers:
>
> kvm_trace_entryexit arch/x86/kvm/kvm-intel  %u %p %u %u %u %u %u %u
> kvm_trace_handler arch/x86/kvm/kvm-intel  %u %p %u %u %u %u %u %u
> kvm_trace_entryexit arch/x86/kvm/kvm-amd  %u %p %u %u %u %u %u %u
> kvm_trace_handler arch/x86/kvm/kvm-amd  %u %p %u %u %u %u %u %u
>
> (Note the lack of any of the kernel_sched_* markers, and the markers I
> added for ext4_* and jbd2_* are missing as wel.)
>
> Systemtap apparently depends on in-kernel trace_mark being recorded in
> Module.markers, and apparently it's been claimed that it used to be
> there.  Is this a bug in systemtap, or in how Module.markers is getting
> built?   And is there a file that contains the equivalent information
> for markers located in non-modules code?

I think the problem comes from "markers: fix duplicate modpost entry"
(commit d35cb360c29956510b2fe1a953bd4968536f7216)

Especially :

  -   add_marker(mod, marker, fmt);
  +   if (!mod->skip)
  +     add_marker(mod, marker, fmt);
    }
    return;
   fail:

Here is a fix that should take care if this problem.

Thanks for the bug report!

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Tested-by: "Theodore Ts'o" <tytso@mit.edu>
CC: Greg KH <greg@kroah.com>
CC: David Smith <dsmith@redhat.com>
CC: Roland McGrath <roland@redhat.com>
CC: Sam Ravnborg <sam@ravnborg.org>
CC: Wenji Huang <wenji.huang@oracle.com>
CC: Takashi Nishiie <t-nishiie@np.css.fujitsu.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoMerge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel...
Linus Torvalds [Mon, 6 Oct 2008 21:30:02 +0000]
Merge branch 'for_linus' of git://git./linux/kernel/git/jwessel/linux-2.6-kgdb

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb:
  kgdb: call touch_softlockup_watchdog on resume
  kgdb, x86: Avoid invoking kgdb_nmicallback twice per NMI

11 years agoMerge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Mon, 6 Oct 2008 21:29:16 +0000]
Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: gart iommu have direct mapping when agp is present too

11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6
Linus Torvalds [Mon, 6 Oct 2008 21:27:57 +0000]
Merge git://git./linux/kernel/git/bart/ide-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6:
  ide: workaround for bogus gcc warning in ide_sysfs_register_port()
  ide-cd: Optiarc DVD RW AD-7200A does play audio
  IDE: Fix platform device registration in Swarm IDE driver (v2)
  ide-dma: fix ide_build_dmatable() for TRM290
  ide-cd: temporary tray close fix

11 years agoMerge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
Linus Torvalds [Mon, 6 Oct 2008 21:27:39 +0000]
Merge branch 'upstream' of git://ftp.linux-mips.org/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] IP27: Fix build errors if CONFIG_MAPPED_KERNEL=y
  [MIPS] Fix CMP Kconfig configuration and mark as broken.

11 years agoMerge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb
Linus Torvalds [Mon, 6 Oct 2008 21:27:15 +0000]
Merge branch 'fixes' of git://git./linux/kernel/git/mchehab/v4l-dvb

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (33 commits)
  V4L/DVB (9103): em28xx: HVR-900 B3C0 - fix audio clicking issue
  V4L/DVB (9099): em28xx: Add detection for K-WORLD DVB-T 310U
  V4L/DVB (9092): gspca: Bad init values for sonixj ov7660.
  V4L/DVB (9080): gspca: Add a delay after writing to the sonixj sensors.
  V4L/DVB (9075): gspca: Bad check of returned status in i2c_read() spca561.
  V4L/DVB (9053): fix buffer overflow in uvc-video
  V4L/DVB (9043): S5H1420: Fix size of shadow-array to avoid overflow
  V4L/DVB (9037): Fix support for Hauppauge Nova-S SE
  V4L/DVB (9029): Fix deadlock in demux code
  V4L/DVB (8979): sms1xxx: Add new USB product ID for Hauppauge WinTV MiniStick
  V4L/DVB (8978): sms1xxx: fix product name for Hauppauge WinTV MiniStick
  V4L/DVB (8967): Use correct XC3028L firmware for AMD ATI TV Wonder 600
  V4L/DVB (8963): s2255drv field count fix
  V4L/DVB (8961): zr36067: Fix RGBR pixel format
  V4L/DVB (8960): drivers/media/video/cafe_ccic.c needs mm.h
  V4L/DVB (8958): zr36067: Return proper bytes-per-line value
  V4L/DVB (8957): zr36067: Restore the default pixel format
  V4L/DVB (8955): bttv: Prevent NULL pointer dereference in radio_open
  V4L/DVB (8935): em28xx-cards: Remove duplicate entry (EM2800_BOARD_KWORLD_USB2800)
  V4L/DVB (8933): gspca: Disable light frquency for zc3xx cs2102 Kokom.
  ...

11 years agoatmel-mci: Initialize BLKR before sending data transfer command
Haavard Skinnemoen [Mon, 6 Oct 2008 18:09:53 +0000]
atmel-mci: Initialize BLKR before sending data transfer command

The atmel-mci driver sometimes fails data transfers like this:

   mmcblk0: error -5 transferring data
   end_request: I/O error, dev mmcblk0, sector 2749769
   end_request: I/O error, dev mmcblk0, sector 2749777

It turns out that this might be caused by the BLKR register (which
contains the block size and the number of blocks being transfered) being
initialized too late. This patch moves the initialization of BLKR so
that it contains the correct value before the block transfer command is
sent.

This error is difficult to reproduce, but if you insert a long delay
(mdelay(10) or thereabouts) between the calls to atmci_start_command()
and atmci_submit_data(), all transfers seem to fail without this patch,
while I haven't seen any failures with this patch.

Reported-by: Hein_Tibosch <hein_tibosch@yahoo.es>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agonetrom: Fix sock_orphan() use in nr_release
Jarek Poplawski [Mon, 6 Oct 2008 19:54:57 +0000]
netrom: Fix sock_orphan() use in nr_release

While debugging another bug it was found that NetRom socks
are sometimes seen unorphaned in sk_free(). This patch moves
sock_orphan() in nr_release() to the beginning (like in ax25,
or rose).

Reported-and-tested-by: Bernard Pidoux f6bvp <f6bvp@free.fr>
Signed-off-by: Jarek Poplawski <jarkao2@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agoax25: Quick fix for making sure unaccepted sockets get destroyed.
David S. Miller [Mon, 6 Oct 2008 19:53:50 +0000]
ax25: Quick fix for making sure unaccepted sockets get destroyed.

Since we reverted 30902dc3cb0ea1cfc7ac2b17bcf478ff98420d74 ("ax25: Fix
std timer socket destroy handling.") we have to put some kind of fix
in to cure the issue whereby unaccepted connections do not get destroyed.

The approach used here is from Tihomir Heidelberg - 9a4gl

Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agoRevert "ax25: Fix std timer socket destroy handling."
David S. Miller [Mon, 6 Oct 2008 19:48:29 +0000]
Revert "ax25: Fix std timer socket destroy handling."

This reverts commit 30902dc3cb0ea1cfc7ac2b17bcf478ff98420d74.

It causes all kinds of problems, based upon a report by
Bernard (f6bvp) and analysis by Jarek Poplawski.

Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agokgdb: call touch_softlockup_watchdog on resume
Jason Wessel [Mon, 6 Oct 2008 18:50:59 +0000]
kgdb: call touch_softlockup_watchdog on resume

The softlockup watchdog needs to be touched when resuming the from the
kgdb stopped state to avoid the printk that a CPU is stuck if the
debugger was active for longer than the softlockup threshold.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>

11 years agokgdb, x86: Avoid invoking kgdb_nmicallback twice per NMI
Jan Kiszka [Mon, 6 Oct 2008 18:50:59 +0000]
kgdb, x86: Avoid invoking kgdb_nmicallback twice per NMI

Stress-testing KVM's latest NMI support with kgdbts inside an SMP guest,
I came across spurious unhandled NMIs while running the singlestep test.
Looking closer at the code path each NMI takes when KGDB is enabled, I
noticed that kgdb_nmicallback is called twice per event: One time via
DIE_NMI_IPI notification, the second time on DIE_NMI. Removing the first
invocation cures the unhandled NMIs here.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>

11 years agox86 ACPI: Blacklist two HP machines with buggy BIOSes
Rafael J. Wysocki [Mon, 6 Oct 2008 09:59:29 +0000]
x86 ACPI: Blacklist two HP machines with buggy BIOSes

There is a bug in the BIOSes of some HP boxes with AMD Turions which
connects IO-APIC pins with ACPI thermal trip points in such a way that
if the state of the IO-APIC is not as expected by the (buggy) BIOS, the
thermal trip points are set to insanely low values (usually all of them
become 16 degrees Celsius).  As a result, thermal throttling kicks in
and knock the system down to its shoes.

Unfortunately some of the recent IO-APIC changes made the bug show up.
To prevent this from happening, blacklist machines that are known to be
affected (nx6115 and 6715b in this particular case).

This fixes http://bugzilla.kernel.org/show_bug.cgi?id=11516 listed as
a regression from 2.6.26.

On my box it was caused by:

commit 691874fa96d6349a8b60f8ea9c2bae52ece79941
Author: Maciej W. Rozycki <macro@linux-mips.org>
Date:   Tue May 27 21:19:51 2008 +0100

    x86: I/O APIC: timer through 8259A second-chance

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

and the whole story is described in this (huge) thread:

    http://marc.info/?l=linux-kernel&m=121358440508410&w=4

Matthew Garrett told us about that happening on the nx6125:

    http://marc.info/?l=linux-kernel&m=121396307411930&w=4

and then Maciej analysed the breakage on the basis of a DSDT from the
nx6325:

    http://marc.info/?l=linux-kernel&m=121401068718826&w=4

As far as the Dmitry's and Jason's boxes are concerned, I recognized the
symptoms and asked them to verify that the blacklisting helped.

It appears that the buggy BIOS code has been copy-pasted to the entire
range of machines, for no good reason.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Tested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Tested-by: Jason Vas Dias <jason.vas.dias@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years ago[Bluetooth] Add reset quirk for A-Link BlueUSB21 dongle
Marcel Holtmann [Mon, 6 Oct 2008 10:22:52 +0000]
[Bluetooth] Add reset quirk for A-Link BlueUSB21 dongle

The new A-Link Bluetooth dongle is another one based on the BCM2046 chip
from Broadcom and it also needs to send HCI_Reset before it becomes fully
operational. Without the quirk it will show a lot of I/O errors.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

11 years ago[Bluetooth] Add reset quirk for new Targus and Belkin dongles
Marcel Holtmann [Mon, 6 Oct 2008 10:22:51 +0000]
[Bluetooth] Add reset quirk for new Targus and Belkin dongles

Targus and Belkin have come out with new Bluetooth 2.1 capable dongles
using the latest BCM2046 chip from Broadcom. Both of them are so called
HID proxy dongles and they need to send HCI_Reset before they become
fully operational.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

11 years ago[Bluetooth] Fix double frees on error paths of btusb and bpa10x drivers
Marcel Holtmann [Mon, 6 Oct 2008 10:22:51 +0000]
[Bluetooth] Fix double frees on error paths of btusb and bpa10x drivers

The transfer buffer of an URB will be automatically freed when using
the URB_FREE_BUFFER transfer_flag. So the extra calls to kfree() will
cause a double free.

Reported-by: Justin Mattock <justinmattock@gmail.com>
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

11 years ago[MIPS] IP27: Fix build errors if CONFIG_MAPPED_KERNEL=y
Ralf Baechle [Fri, 3 Oct 2008 21:43:38 +0000]
[MIPS] IP27: Fix build errors if CONFIG_MAPPED_KERNEL=y

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

11 years ago[MIPS] Fix CMP Kconfig configuration and mark as broken.
Ralf Baechle [Fri, 3 Oct 2008 23:06:29 +0000]
[MIPS] Fix CMP Kconfig configuration and mark as broken.

Because sync-r4k.c doesn't build.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

11 years agoide: workaround for bogus gcc warning in ide_sysfs_register_port()
Bartlomiej Zolnierkiewicz [Sun, 5 Oct 2008 16:23:28 +0000]
ide: workaround for bogus gcc warning in ide_sysfs_register_port()

Reported-by: "Steven Noonan" <steven@uplinklabs.net>
Suggested-by: "Elias Oltmanns" <eo@nebensachen.de>
Cc: mingo@elte.hu
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide-cd: Optiarc DVD RW AD-7200A does play audio
Bodo Eggert [Sun, 5 Oct 2008 16:23:28 +0000]
ide-cd: Optiarc DVD RW AD-7200A does play audio

The Optiarc DVD RW AD-7200A can play audio, but tells it could not.

Signed-off-by: Bodo Eggert <7eggert@gmx.de>
Tested-by: Nick Warne <nick@ukfsn.org>
Received-from: Borislav Petkov <petkovbb@googlemail.com>
[bart: keep "audio" quirks together]
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoIDE: Fix platform device registration in Swarm IDE driver (v2)
Ralf Baechle [Sun, 5 Oct 2008 16:23:28 +0000]
IDE: Fix platform device registration in Swarm IDE driver (v2)

The Swarm IDE driver uses a release method which is defined in the driver
itself thus potentially oopsable.  The simple fix would be to just leak
the device but this patch goes the full length and moves the entire
handling of the platform device in the platform code and retains only
the platform driver code in drivers/ide/mips/swarm.c.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Cc: "Maciej W. Rozycki" <macro@linux-mips.org>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
[bart: remove no longer needed BLK_DEV_IDE_SWARM from ide/Kconfig]
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide-dma: fix ide_build_dmatable() for TRM290
Sergei Shtylylov [Sun, 5 Oct 2008 16:23:27 +0000]
ide-dma: fix ide_build_dmatable() for TRM290

Apparently, 'xcount' being 0 does not mean 0 bytes for TRM290; it means 4 bytes,
judging from the code immediately preceding this check.  So, we must never try
to "split" the PRD for TRM290.

This is probably never hit anyway -- with the DMA buffers aligned to at least
512 bytes and ATAPI DMA not being used for non block I/O commands...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide-cd: temporary tray close fix
Borislav Petkov [Sun, 5 Oct 2008 16:23:27 +0000]
ide-cd: temporary tray close fix

This one fixes http://bugzilla.kernel.org/show_bug.cgi?id=11602.

A more generic fix for drives which cannot autoclose tray will follow.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
[bart: add an extra parentheses for consistency with the rest of kernel code]
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agox86: gart iommu have direct mapping when agp is present too
Yinghai Lu [Sat, 4 Oct 2008 22:55:12 +0000]
x86: gart iommu have direct mapping when agp is present too

move init_memory_mapping() out of init_k8_gatt.

for: http://bugzilla.kernel.org/show_bug.cgi?id=11676
    2.6.27-rc2 to rc8, apgart fails, iommu=soft works, regression

This is needed because we need to map the GART aperture even
if the GATT is not initialized.

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agoV4L/DVB (9103): em28xx: HVR-900 B3C0 - fix audio clicking issue
Wiktor Grebla [Sun, 28 Sep 2008 04:37:48 +0000]
V4L/DVB (9103): em28xx: HVR-900 B3C0 - fix audio clicking issue

Fixed audio clicking problem which could be heard when using analog tv or composite input

Signed-off-by: Wiktor Grebla <greblus@gmail.com>
Signed-off-by: Douglas Schilling Landgraf <dougsland@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

11 years agoV4L/DVB (9099): em28xx: Add detection for K-WORLD DVB-T 310U
Darron Broad [Tue, 30 Sep 2008 05:46:41 +0000]
V4L/DVB (9099): em28xx: Add detection for K-WORLD DVB-T 310U

Correct firmware type to MTS
Correct audio routing for composite/s-video
Add DVB-T detection.

This patch uses the eeprom hash method for detection as the vendor/product
ids are also used for the DIGIVOX_AD. This may be a clone of the same
product. Explanatory text has been added prior to the hask look-up in
anticipation that it may help others.

The following has been tested to work:
Analogue TV (PAL-I)
Composite In
DVB-T (UK Crystal Palace)
USB AUDIO

The following has not been tested but probably works:
S-Video In

Signed-off-by: Darron Broad <darron@kewl.org>
Signed-off-by: Douglas Schilling Landgraf <dougsland@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

11 years agoV4L/DVB (9092): gspca: Bad init values for sonixj ov7660.
Jean-Francois Moine [Thu, 2 Oct 2008 11:06:59 +0000]
V4L/DVB (9092): gspca: Bad init values for sonixj ov7660.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

11 years agoV4L/DVB (9080): gspca: Add a delay after writing to the sonixj sensors.
Jean-Francois Moine [Sun, 21 Sep 2008 06:28:55 +0000]
V4L/DVB (9080): gspca: Add a delay after writing to the sonixj sensors.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

11 years agoV4L/DVB (9075): gspca: Bad check of returned status in i2c_read() spca561.
Shane [Sun, 14 Sep 2008 07:17:46 +0000]
V4L/DVB (9075): gspca: Bad check of returned status in i2c_read() spca561.

This makes auto gain functional on 04fc:0561.

Signed-off-by: Shane <gnome42@gmail.com>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

11 years agoV4L/DVB (9053): fix buffer overflow in uvc-video
Ralph Loader [Tue, 23 Sep 2008 00:06:48 +0000]
V4L/DVB (9053): fix buffer overflow in uvc-video

There is a buffer overflow in drivers/media/video/uvc/uvc_ctrl.c:

INFO: 0xf2c5ce08-0xf2c5ce0b. First byte 0xa1 instead of 0xcc
INFO: Allocated in uvc_query_v4l2_ctrl+0x3c/0x239 [uvcvideo] age=13 cpu=1 pid=4975
...

A fixed size 8-byte buffer is allocated, and a variable size field is read
into it; there is no particular bound on the size of the field (it is
dependent on hardware and configuration) and it can overflow [also
verified by inserting printk's.]

The patch attempts to size the buffer to the correctly.

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

11 years agoV4L/DVB (9043): S5H1420: Fix size of shadow-array to avoid overflow
Patrick Boettcher [Sun, 7 Sep 2008 19:04:38 +0000]
V4L/DVB (9043): S5H1420: Fix size of shadow-array to avoid overflow

The array size of 'shadow' still needs to be fixed in order to not overflow when reading register 0x00.

Thanks to Oliver Endriss for pointing that out.

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

11 years agoV4L/DVB (9037): Fix support for Hauppauge Nova-S SE
Patrick Boettcher [Sat, 6 Sep 2008 16:31:58 +0000]
V4L/DVB (9037): Fix support for Hauppauge Nova-S SE

Different backends have different input busses (saa7146, flexcop).
To reflect that a config-option to the s5h1420-driver was added which makes
the output mode selectable.

Furthermore the s5h1420-driver is now doing the same i2c-method as it was done
before adding support for other i2c-users.

This patch needs to go into the current release of the kernel, as this driver
is currently broken.

(Thanks to Eberhard Kaltenhaeuser for helping out to debug this issue.)

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

11 years agoV4L/DVB (9029): Fix deadlock in demux code
Andreas Oberritter [Wed, 24 Sep 2008 08:00:37 +0000]
V4L/DVB (9029): Fix deadlock in demux code

The functions dvb_dmxdev_section_callback, dvb_dmxdev_ts_callback,
dvb_dmx_swfilter_packet, dvb_dmx_swfilter_packets, dvb_dmx_swfilter and
dvb_dmx_swfilter_204 may be called from both interrupt and process
context. Therefore they need to be protected by spin_lock_irqsave()
instead of spin_lock().

This fixes a deadlock discovered by lockdep.

Signed-off-by: Andreas Oberritter <obi@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

11 years agoV4L/DVB (8979): sms1xxx: Add new USB product ID for Hauppauge WinTV MiniStick
Michael Krufky [Tue, 16 Sep 2008 19:46:42 +0000]
V4L/DVB (8979): sms1xxx: Add new USB product ID for Hauppauge WinTV MiniStick

2040:5510 is the same hardware as 2040:5500

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

11 years agoV4L/DVB (8978): sms1xxx: fix product name for Hauppauge WinTV MiniStick
Michael Krufky [Fri, 12 Sep 2008 02:02:12 +0000]
V4L/DVB (8978): sms1xxx: fix product name for Hauppauge WinTV MiniStick

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

11 years agoV4L/DVB (8967): Use correct XC3028L firmware for AMD ATI TV Wonder 600
Devin Heitmueller [Tue, 16 Sep 2008 05:02:12 +0000]
V4L/DVB (8967): Use correct XC3028L firmware for AMD ATI TV Wonder 600

The AMD ATI TV Wonder 600 has an XC3028L and *not* an XC3028, so we need to
load the proper firmware to prevent the device from overheating.

Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

11 years agoV4L/DVB (8963): s2255drv field count fix
Dean Anderson [Tue, 9 Sep 2008 15:29:56 +0000]
V4L/DVB (8963): s2255drv field count fix

Fixes videobuf field_count

Signed-off-by: Dean Anderson <dean@sensoray.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

11 years agoV4L/DVB (8961): zr36067: Fix RGBR pixel format
Jean Delvare [Fri, 5 Sep 2008 13:39:27 +0000]
V4L/DVB (8961): zr36067: Fix RGBR pixel format

The zr36067 driver is improperly declaring pixel format RGBP twice,
once as "16-bit RGB LE" and once as "16-bit RGB BE". The latter is
actually RGBR. Fix the code to properly map both pixel formats.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

11 years agoV4L/DVB (8960): drivers/media/video/cafe_ccic.c needs mm.h
Andrew Morton [Wed, 3 Sep 2008 05:15:39 +0000]
V4L/DVB (8960): drivers/media/video/cafe_ccic.c needs mm.h

sparc32 allmodconfig:

drivers/media/video/cafe_ccic.c: In function 'cafe_setup_siobuf':
drivers/media/video/cafe_ccic.c:1192: error: implicit declaration of function 'PAGE_ALIGN'
drivers/media/video/cafe_ccic.c: At top level:
drivers/media/video/cafe_ccic.c:1430: error: variable 'cafe_v4l_vm_ops' has initializer but incomplete type
drivers/media/video/cafe_ccic.c:1431: error: unknown field 'open' specified in initializer
drivers/media/video/cafe_ccic.c:1431: warning: excess elements in struct initializer
drivers/media/video/cafe_ccic.c:1431: warning: (near initialization for 'cafe_v4l_vm_ops')
drivers/media/video/cafe_ccic.c:1432: error: unknown field 'close' specified in initializer
drivers/media/video/cafe_ccic.c:1433: warning: excess elements in struct initializer
drivers/media/video/cafe_ccic.c:1433: warning: (near initialization for 'cafe_v4l_vm_ops')
drivers/media/video/cafe_ccic.c: In function 'cafe_v4l_mmap':
drivers/media/video/cafe_ccic.c:1444: error: 'VM_WRITE' undeclared (first use in this function)
drivers/media/video/cafe_ccic.c:1444: error: (Each undeclared identifier is reported only once
drivers/media/video/cafe_ccic.c:1444: error: for each function it appears in.)
drivers/media/video/cafe_ccic.c:1444: error: 'VM_SHARED' undeclared (first use in this function)
drivers/media/video/cafe_ccic.c:1461: error: 'VM_DONTEXPAND' undeclared (first use in this function)

This build breakage is caused by some header file shuffle in linux-next.  But
I suggest that this patch be merged ahead of linux-next to avoid bisection
breakage.

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

11 years agoV4L/DVB (8958): zr36067: Return proper bytes-per-line value
Jean Delvare [Sun, 7 Sep 2008 08:56:55 +0000]
V4L/DVB (8958): zr36067: Return proper bytes-per-line value

The zr36067 driver should return the actual bytes-per-line value when
queried with ioctl VIDIOC_G_FMT, instead of 0. Otherwise user-space
applications can get confused.

Likewise, with ioctl VIDIOC_S_FMT, we are supposed to fill the
bytes-per-line value. And we shouldn't fail if the caller sets the
initial value to something different from 0. This is perfectly valid
for applications to pre-fill this field with the value they expect.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

11 years agoV4L/DVB (8957): zr36067: Restore the default pixel format
Jean Delvare [Sun, 7 Sep 2008 08:21:34 +0000]
V4L/DVB (8957): zr36067: Restore the default pixel format

Restore the default pixel format to YUYV as it used to be before
kernel 2.6.23. It was accidentally changed to BGR3 by commit
603d6f2c8f9f3604f9c6c1f8903efc2df30a000f.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

11 years agoV4L/DVB (8955): bttv: Prevent NULL pointer dereference in radio_open
Jean Delvare [Sun, 7 Sep 2008 16:47:03 +0000]
V4L/DVB (8955): bttv: Prevent NULL pointer dereference in radio_open

Fix the following crash in the bttv driver:

BUG: unable to handle kernel NULL pointer dereference at 000000000000036c
IP: [<ffffffffa037860a>] radio_open+0x3a/0x170 [bttv]

This happens because radio_open assumes that all present bttv devices
have a radio function. If a bttv device without radio and one with
radio are installed on the same system, and the one without radio is
registered first, then radio_open checks for the radio device number
of a bttv device that has no radio function, and this breaks. All we
have to do to fix it is to skip bttv devices without a radio function.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>