12 years agosh: Allow SH-3 and SH-5 to use common headers.
Paul Mundt [Tue, 29 Jul 2008 13:52:49 +0000]
sh: Allow SH-3 and SH-5 to use common headers.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

12 years agosh: Provide common CPU headers, prune the SH-2 and SH-2A directories.
Paul Mundt [Tue, 29 Jul 2008 13:46:55 +0000]
sh: Provide common CPU headers, prune the SH-2 and SH-2A directories.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

12 years agosh/maple: clean maple bus code
Adrian McMenamin [Tue, 29 Jul 2008 13:10:56 +0000]
sh/maple: clean maple bus code

This patch cleans up the handling of the maple bus queue to remove
the risk of races when adding packets. It also removes references to the
redundant connect and disconnect functions.

Signed-off-by: Adrian McMenamin <adrian@mcmen.demon.co.uk>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

12 years agosh: More header path fixups for mach dir refactoring.
Paul Mundt [Tue, 29 Jul 2008 13:10:01 +0000]
sh: More header path fixups for mach dir refactoring.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

12 years agosh: Move out the solution engine headers to arch/sh/include/mach-se/
Paul Mundt [Tue, 29 Jul 2008 12:41:37 +0000]
sh: Move out the solution engine headers to arch/sh/include/mach-se/

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

12 years agosh: I2C fix for AP325RXA and Migo-R
Magnus Damm [Tue, 29 Jul 2008 11:57:38 +0000]
sh: I2C fix for AP325RXA and Migo-R

Fix recently introduced I2C build breakage on AP325RXA and Migo-R.

Reported-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

12 years agosh: Shuffle the board directories in to mach groups.
Paul Mundt [Tue, 29 Jul 2008 12:01:19 +0000]
sh: Shuffle the board directories in to mach groups.

This flattens out the board directories in to individual mach groups,
we will use this for getting rid of unneeded directories, simplifying
the build system, and becoming more coherent with the refactored
arch/sh/include topology.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

12 years agosh: dma-sh: Fix up dreamcast dma.h mach path.
Paul Mundt [Tue, 29 Jul 2008 11:20:36 +0000]
sh: dma-sh: Fix up dreamcast dma.h mach path.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

12 years agosh: Switch KBUILD_DEFCONFIG to shx3_defconfig.
Paul Mundt [Tue, 29 Jul 2008 11:19:43 +0000]
sh: Switch KBUILD_DEFCONFIG to shx3_defconfig.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

12 years agosh: Add ARCH_DEFCONFIG entries for sh and sh64.
Paul Mundt [Tue, 29 Jul 2008 11:12:51 +0000]
sh: Add ARCH_DEFCONFIG entries for sh and sh64.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

12 years agosh: Fix compile error of Solution Engine
Nobuhiro Iwamatsu [Tue, 29 Jul 2008 05:37:25 +0000]
sh: Fix compile error of Solution Engine

When I compiled Solution Engine, this become compile error
because plaform device of sh_eth device becomes enable.
When sh7710/sh7712 which could use sh_eth was chosen,
revised it so that platform device of sh_eth device became enable.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

12 years agosh: Proper __put_user_asm() size mismatch fix.
OGAWA Hirofumi [Tue, 29 Jul 2008 00:16:33 +0000]
sh: Proper __put_user_asm() size mismatch fix.

This fixes up the workaround in 2b4b2bb42137c779ef0084de5df66ff21b4cd86e
and cleans up __put_user_asm() to get the sizing right from the onset.

Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

12 years agosh: Stub in a dummy ENTRY_OFFSET for uImage offset calculation.
Paul Mundt [Tue, 29 Jul 2008 00:15:01 +0000]
sh: Stub in a dummy ENTRY_OFFSET for uImage offset calculation.

If none is defined, provide a sane default, as we do for the other
options.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

12 years agosh: Add an arch/sh/kernel/.gitignore
Paul Mundt [Mon, 28 Jul 2008 23:29:32 +0000]
sh: Add an arch/sh/kernel/.gitignore

Ignore vmlinux.lds.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

12 years agosh: dreamcast: fix build failure from header reorg.
Paul Mundt [Mon, 28 Jul 2008 23:24:50 +0000]
sh: dreamcast: fix build failure from header reorg.

Oops, machvec.h is in asm/, it was previously removed due to overzealous
trimming. Fix up the path again.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

12 years agosh: migrate to arch/sh/include/
Paul Mundt [Mon, 28 Jul 2008 23:09:44 +0000]
sh: migrate to arch/sh/include/

This follows the sparc changes a439fe51a1f8eb087c22dd24d69cebae4a3addac.

Most of the moving about was done with Sam's directions at:

http://marc.info/?l=linux-sh&m=121724823706062&w=2

with subsequent hacking and fixups entirely my fault.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

12 years agovideo: Kill off leaked CONFIG_FB_SH7343VOU reference.
Paul Mundt [Mon, 28 Jul 2008 21:39:26 +0000]
video: Kill off leaked CONFIG_FB_SH7343VOU reference.

This came in with the SH-Mobile LCDC changes in commit
cfb4f5d1750e05f43902197713c50c29e7dfbc99, kill it off.

Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

12 years agoMAINTAINERS: Switch SUPERH to Supported.
Paul Mundt [Mon, 28 Jul 2008 21:34:01 +0000]
MAINTAINERS: Switch SUPERH to Supported.

Apparently the SH entry ought to be Supported instead of Maintained,
given the suble difference in terminology. Though it's been this way
for years now, thanks to Renesas.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

12 years agosh: Fix up unaligned current_text_addr().
Paul Mundt [Mon, 28 Jul 2008 13:32:03 +0000]
sh: Fix up unaligned current_text_addr().

As noted by Adrian:

Commit 3ab83521378268044a448113c6aa9a9e245f4d2f (kexec jump)
causes the following build error on sh:

<--  snip  -->

...
  CC      kernel/kexec.o
{standard input}: Assembler messages:
{standard input}:1518: Error: offset to unaligned destination
make[2]: *** [kernel/kexec.o] Error 1

<--  snip  -->

If I understand the assembler correctly it fails at
include/asm-sh/kexec.h:59

The issue here is that the mova reference lacks an explicit alignment,
and previous code paths would end up with this on a 16-bit boundary,
so we make the alignment explicit.

Reported-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

12 years agosh: rsk7203: update defconfig.
Paul Mundt [Mon, 28 Jul 2008 13:31:43 +0000]
sh: rsk7203: update defconfig.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

12 years agosh: rsk7203: Add smc911x platform data.
Paul Mundt [Mon, 28 Jul 2008 13:31:02 +0000]
sh: rsk7203: Add smc911x platform data.

This hooks up platform data for the SMC9118 on the RSK+7203.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

12 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Linus Torvalds [Mon, 28 Jul 2008 16:59:26 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: add driver for Atmel integrated touchscreen controller
  Input: ads7846 - optimize order of calculating Rt in ads7846_rx()
  Input: ads7846 - fix sparse endian warnings
  Input: uinput - remove duplicate include
  Input: serio - offload resume to kseriod
  Input: serio - mark serio_register_driver() __must_check

12 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm
Linus Torvalds [Mon, 28 Jul 2008 16:46:00 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/teigland/dlm

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm:
  dlm: fix uninitialized variable for search_rsb_list callers
  dlm: release socket on error
  dlm: fix basts for granted CW waiting PR/CW
  dlm: check for null in device_write

12 years agoMerge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Linus Torvalds [Mon, 28 Jul 2008 16:05:35 +0000]
Merge branch 'merge' of git://git./linux/kernel/git/benh/powerpc

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (25 commits)
  powerpc: Disable 64K hugetlb support when doing 64K SPU mappings
  powerpc/powermac: Fixup default serial port device for pmac_zilog
  powerpc/powermac: Use sane default baudrate for SCC debugging
  powerpc/mm: Implement _PAGE_SPECIAL & pte_special() for 64-bit
  powerpc: Show processor cache information in sysfs
  powerpc: Make core id information available to userspace
  powerpc: Make core sibling information available to userspace
  powerpc/vio: More fallout from dma_mapping_error API change
  ibmveth: Fix multiple errors with dma_mapping_error conversion
  powerpc/pseries: Fix CMO sysdev attribute API change fallout
  powerpc: Enable tracehook for the architecture
  powerpc: Add TIF_NOTIFY_RESUME support for tracehook
  powerpc: Add asm/syscall.h with the tracehook entry points
  powerpc: Make syscall tracing use tracehook.h helpers
  powerpc: Call tracehook_signal_handler() when setting up signal frames
  powerpc: Update cpu_sibling_maps dynamically
  powerpc: register_cpu_online should be __cpuinit
  powerpc: kill useless SMT code in prom_hold_cpus
  powerpc: Fix 8xx build failure
  powerpc: Fix vio build warnings
  ...

12 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/kkeil/ISDN-2.6
Linus Torvalds [Mon, 28 Jul 2008 15:41:56 +0000]
Merge git://git./linux/kernel/git/kkeil/ISDN-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/kkeil/ISDN-2.6:
  Remove deprecated virt_to_bus()

12 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6
Linus Torvalds [Mon, 28 Jul 2008 15:41:13 +0000]
Merge git://git./linux/kernel/git/lethal/sh-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (72 commits)
  sh: SuperH Mobile CEU and camera platform data for AP325RXA
  sh: Update smc911x platform data for AP325RXA
  sh: SuperH Mobile LCDC platform data for AP325RXA
  sh: Add SuperH Mobile CEU platform data for Migo-R
  sh: Add SuperH Mobile LCDC platform data for Migo-R
  sh: Move asid_cache() out of ifdef to fix SH-3/4 nommu build.
  sh: Workaround for __put_user_asm() bug with gcc 4.x on big-endian.
  sh: Wire up new syscalls.
  sh: fix uImage Entry Point
  sh_keysc: remove request_mem_region() and release_mem_region()
  sh: Don't miss pending signals returning to user mode after signal processing
  sh: Use clk_always_enable() on sh7366
  sh: Use clk_always_enable() on sh7343 / SE77343
  sh: Use clk_always_enable() on sh7722 / Migo-R / SE7722
  sh: Use clk_always_enable() on sh7723 / ap325rxa
  sh: Introduce clk_always_enable() function
  sh: Show all clocks and their state in /proc/clocks
  sh: Merge sh7343 and sh7722 clock code
  sh: Add SuperH Mobile MSTPCR bits to clock framework
  sh: Use arch_flags to simplify sh7722 siu clock code
  ...

12 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus
Linus Torvalds [Mon, 28 Jul 2008 15:37:46 +0000]
Merge git://git./linux/kernel/git/rusty/linux-2.6-for-linus

* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  stop_machine: fix up ftrace.c
  stop_machine: Wean existing callers off stop_machine_run()
  stop_machine(): stop_machine_run() changed to use cpu mask
  Hotplug CPU: don't check cpu_online after take_cpu_down
  Simplify stop_machine
  stop_machine: add ALL_CPUS option
  module: fix build warning with !CONFIG_KALLSYMS

12 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb
Linus Torvalds [Mon, 28 Jul 2008 15:35:40 +0000]
Merge git://git./linux/kernel/git/mchehab/v4l-dvb

* git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (98 commits)
  V4L/DVB (8549): mxl5007: Fix an error at include file
  V4L/DVB (8548): pwc: Fix compilation
  V4L/DVB (8546): add tuner-3036 and dpc7146 drivers to feature-removal-schedule.txt
  V4L/DVB (8546): saa7146: fix read from uninitialized memory
  V4L/DVB (8544): gspca: probe/open race.
  V4L/DVB (8543): em28xx: Rename #define for Compro VideoMate ForYou/Stereo
  V4L/DVB (8542): em28xx: AMD ATI TV Wonder HD 600 entry at cards struct is duplicated
  V4L/DVB (8541): em28xx: HVR-950 entry is duplicated.
  V4L/DVB (8540): em28xx-cards: Add Compro VideoMate ForYou/Stereo model
  V4L/DVB (8539): em28xx-cards: New supported IDs for analog models
  V4L/DVB (8538): em28xx-cards: Add GrabBeeX+ USB2800 model
  V4L/DVB (8534): remove select's of FW_LOADER
  V4L/DVB (8522): videodev2: Fix merge conflict
  V4L/DVB (8532): mxl5007t: remove excessive locks
  V4L/DVB (8531): mxl5007t: move i2c gate handling outside of mutex protected code blocks
  V4L/DVB (8530): au0828: add support for new revision of HVR950Q
  V4L/DVB (8529): mxl5007t: enable _init and _sleep power management functionality
  V4L/DVB (8528): add support for MaxLinear MxL5007T silicon tuner
  V4L/DVB (8526): saa7146: fix VIDIOC_ENUM_FMT
  V4L/DVB (8525): fix a few assorted spelling mistakes.
  ...

12 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6
Linus Torvalds [Mon, 28 Jul 2008 15:33:25 +0000]
Merge git://git./linux/kernel/git/davem/sparc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc: Set CONFIG_HAVE_ARCH_TRACEHOOK
  sparc: Add task_pt_regs().
  sparc: Add call to tracehook_signal_handler().
  sparc: Create and use TIF_NOTIFY_RESUME.
  sparc: Use tracehook routines in syscall_trace().
  sparc64: tracehook: CONFIG_HAVE_ARCH_TRACEHOOK
  sparc: Add user_stack_pointer().
  sparc64: tracehook_signal_handler
  sparc64: tracehook: TIF_NOTIFY_RESUME
  sparc: Add asm/syscall.h
  sparc64: tracehook syscall
  sparc: enable headers_export again
  sparc, sparc64: use arch/sparc/include

12 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Mon, 28 Jul 2008 15:32:25 +0000]
Merge git://git./linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  net: missing bits of net-namespace / sysctl
  ipcomp: Fix warnings after ipcomp consolidation.
  dccp: Add check for truncated ICMPv6 DCCP error packets
  dccp: Fix incorrect length check for ICMPv4 packets
  dccp: Add check for sequence number in ICMPv6 message
  dccp: Fix sequence number check for ICMPv4 packets
  dccp: Bug-Fix - AWL was never updated
  dccp: Allow to distinguish original and retransmitted packets

12 years agoSubmittingPatches: add git pull & diffstat format info
Randy Dunlap [Mon, 28 Jul 2008 03:44:24 +0000]
SubmittingPatches: add git pull & diffstat format info

Add git pull command info and diffstat summary info so that we don't
have to search email archives for it repeatedly.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agomore sysdev API change fallout - drivers/base/memory.c
Stephen Rothwell [Mon, 28 Jul 2008 01:05:04 +0000]
more sysdev API change fallout - drivers/base/memory.c

Noticed because of this warning:

  drivers/base/memory.c:279: warning: initialization from incompatible pointer type

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoACPI/CPUIDLE: prevent setting pm_idle to NULL
Thomas Gleixner [Sun, 27 Jul 2008 21:47:12 +0000]
ACPI/CPUIDLE: prevent setting pm_idle to NULL

pm_idle_save resp. pm_idle_old can be NULL when the restore code in
acpi_processor_cst_has_changed() resp. cpuidle_uninstall_idle_handler()
is called. This can set pm_idle unconditinally to NULL, which causes the
kernel to panic when calling pm_idle in the x86 idle code. This was
covered by an extra check for !pm_idle in the x86 idle code, which was
removed during the x86 idle code refactoring.

Instead of restoring the pm_idle check in the x86 code prevent the
acpi/cpuidle code to set pm_idle to NULL.

Reported by: Dhaval Giani http://lkml.org/lkml/2008/7/2/309
Based on a debug patch from Ingo Molnar

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoMerge branch 'i2c-for-linus' of git://aeryn.fluff.org.uk/bjdooks/linux
Linus Torvalds [Mon, 28 Jul 2008 15:28:50 +0000]
Merge branch 'i2c-for-linus' of git://aeryn.fluff.org.uk/bjdooks/linux

* 'i2c-for-linus' of git://aeryn.fluff.org.uk/bjdooks/linux:
  i2c: Blackfin I2C Driver: Functional power management support
  i2c: Documentation: upgrading clients HOWTO
  i2c: S3C24XX I2C frequency scaling support.
  i2c: i2c_gpio: keep probe resident for hotplugged devices.
  i2c: S3C2410: Pass the I2C bus number via drivers platform data

12 years agoipwireless: Preallocate received packet buffers with MRU size
David Sterba [Mon, 28 Jul 2008 14:53:32 +0000]
ipwireless: Preallocate received packet buffers with MRU size

ipwireless: Preallocate received packet buffers with MRU size

Packets are assembled from link size (~300 bytes) up to PPP MRU
(1500 by default). Try to preallocate full size rather than
repeatedly advance buffer size by 256 bytes.

Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoipwireless: Put packets to pool start
David Sterba [Mon, 28 Jul 2008 14:53:27 +0000]
ipwireless: Put packets to pool start

ipwireless: Put packets to pool start

Put packets to pool start, try to reuse cached memory.

Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoipwireless: Increase PPP outgoing queue size
David Sterba [Mon, 28 Jul 2008 14:53:21 +0000]
ipwireless: Increase PPP outgoing queue size

ipwireless: Increase PPP outgoing queue size

Increase default size of PPP outgoing queue. Currently set to 1, which
means that a packet quickly following another pushed by PPP must wait
until hardware actually sends the previous and PPP has to be waken up
by ppp_wakeup(). This slows down upstream.

Now PPP can push more packets at once which get buffered inside driver
and pushed immediatelly to hardware when previous packet is out.

Experiments show that size = 10 is quite good for all connection types
(GPRS/EDGE/UMTS) and gains 4 KB/sec of upload for UMTS for batch uploads.
Need for higher queue size than 10 occures in only < 0.1 % of cases.

Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoipwireless: Explicitly request io and mem regions
David Sterba [Mon, 28 Jul 2008 14:53:16 +0000]
ipwireless: Explicitly request io and mem regions

ipwireless: Explicitly request io and mem regions

Documentation/pcmcia/driver-changes.txt says, that driver should call request_region
for used memory/io regions since PCMCIA does not do this (since 2.6.8).

Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoipwireless: Constify buffer variables
David Sterba [Mon, 28 Jul 2008 14:53:11 +0000]
ipwireless: Constify buffer variables

ipwireless: Constify buffer variables

Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoipwireless: Do not return value from sending funcs
David Sterba [Mon, 28 Jul 2008 14:53:05 +0000]
ipwireless: Do not return value from sending funcs

ipwireless: Do not return value from sending funcs

Do not return value from do_send_fragment and do_send_packet, it's not used.
The packet size checks are not useful too:

* zero length packet will never be sent, caller always passes packet_header
  size which is either 1 or 3
* MTU check is done in caller, no need to repeat

Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoipwireless: Remove endian-dependent bitfields
David Sterba [Mon, 28 Jul 2008 14:53:00 +0000]
ipwireless: Remove endian-dependent bitfields

ipwireless: Remove endian-dependent bitfields

Remove endian-dependent bitfields and use bitmasks to transform
packet header bitfields from/to machine order.

Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoipwireless: Glue splitted printk strings back
David Sterba [Mon, 28 Jul 2008 14:52:55 +0000]
ipwireless: Glue splitted printk strings back

ipwireless: Glue splitted printk strings back

Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoipwireless: Remove pt_regs from interrupt handler
David Sterba [Mon, 28 Jul 2008 14:52:49 +0000]
ipwireless: Remove pt_regs from interrupt handler

ipwireless: Remove pt_regs from interrupt handler

Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoipwireless: Rename spinlock variables to lock
David Sterba [Mon, 28 Jul 2008 14:52:44 +0000]
ipwireless: Rename spinlock variables to lock

ipwireless: Rename spinlock variables to lock

Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoipwireless: Remove unused defines
David Sterba [Mon, 28 Jul 2008 14:52:39 +0000]
ipwireless: Remove unused defines

ipwireless: Remove unused defines

Remove unused defines, defines hiding variables, defines hiding 0.

Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoipwireless: Misc cleanups
David Sterba [Mon, 28 Jul 2008 14:52:33 +0000]
ipwireless: Misc cleanups

ipwireless: Misc cleanups

- remove likely() and some extra () in ifs
- use unsigned in for loops
- remove useless typecasts
- remove obvious comments
- add () around ?:

Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoi2c: Blackfin I2C Driver: Functional power management support
Michael Hennerich [Sun, 27 Jul 2008 06:41:54 +0000]
i2c: Blackfin I2C Driver: Functional power management support

PM_SUSPEND_MEM: Blackfin does not maintain register state through
Hibernate. Save and restore peripheral base initialization during
PM transitions.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

12 years agoi2c: Documentation: upgrading clients HOWTO
Ben Dooks [Mon, 28 Jul 2008 11:04:08 +0000]
i2c: Documentation: upgrading clients HOWTO

Add a document describing how i2c clients on Linux 2.6 can be
moved from the old to the new driver model.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>

12 years agoi2c: S3C24XX I2C frequency scaling support.
Ben Dooks [Mon, 28 Jul 2008 11:04:07 +0000]
i2c: S3C24XX I2C frequency scaling support.

Add support for CPU frequency scaling to the S3C24XX I2C driver.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>

12 years agoi2c: i2c_gpio: keep probe resident for hotplugged devices.
Ben Dooks [Mon, 28 Jul 2008 11:04:09 +0000]
i2c: i2c_gpio: keep probe resident for hotplugged devices.

Change the i2c_gpio driver to use platform_driver_register()
instead of platform_driver_probe() to ensure that is can
attach to any devices that may be loaded after it has initialised.

Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

12 years agoi2c: S3C2410: Pass the I2C bus number via drivers platform data
Ben Dooks [Mon, 28 Jul 2008 11:04:06 +0000]
i2c: S3C2410: Pass the I2C bus number via drivers platform data

Allow the platform data to specify the bus bumber that the
new I2C bus will be given. This is to allow the use of the
board registration mechanism to specify the new style of
I2C device registration which allows boards to provide a
list of attached devices.

Note, as discussed on the mailing list, we have dropped
backwards compatibility of adding an dynamic bus number
as it should not affect most boards to have the bus pinned
to 0 if they have either not specified platform data for
driver. Any board supplying platform data will automatically
have the bus_num field set to 0, and anyone who needs the
driver on a different bus number can supply platform data
to set bus_num.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>

12 years agoRemove deprecated virt_to_bus()
Karsten Keil [Mon, 28 Jul 2008 10:21:25 +0000]
Remove deprecated virt_to_bus()

Please pull from git://git.kernel.org/pub/scm/linux/kernel/git/kkeil/ISDN-2.6.git master

This was a forgotten item in a printk from the old driver,
the DMA allocation use already the new interface.

Signed-off-by: Karsten Keil <kkeil@suse.de>

12 years agosh: SuperH Mobile CEU and camera platform data for AP325RXA
Magnus Damm [Mon, 28 Jul 2008 10:14:35 +0000]
sh: SuperH Mobile CEU and camera platform data for AP325RXA

Add AP325RXA specific platform data for on-chip sh7723 CEU and ncm03j camera.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

12 years agosh: Update smc911x platform data for AP325RXA
Magnus Damm [Mon, 28 Jul 2008 10:11:07 +0000]
sh: Update smc911x platform data for AP325RXA

Pass board specific smc911x parameters using struct smc911x_platdata.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

12 years agosh: SuperH Mobile LCDC platform data for AP325RXA
Magnus Damm [Mon, 28 Jul 2008 10:07:04 +0000]
sh: SuperH Mobile LCDC platform data for AP325RXA

Add LCD panel platform data for the AP325RXA board.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

12 years agosh: Add SuperH Mobile CEU platform data for Migo-R
Magnus Damm [Mon, 28 Jul 2008 09:51:01 +0000]
sh: Add SuperH Mobile CEU platform data for Migo-R

Add Migo-R specific platform data for on-chip sh7722 CEU and ov772x camera.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

12 years agosh: Add SuperH Mobile LCDC platform data for Migo-R
Magnus Damm [Mon, 28 Jul 2008 09:47:30 +0000]
sh: Add SuperH Mobile LCDC platform data for Migo-R

Add WVGA and QVGA LCD panel support to Migo-R.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

12 years agosh: Move asid_cache() out of ifdef to fix SH-3/4 nommu build.
Paul Mundt [Mon, 28 Jul 2008 09:39:25 +0000]
sh: Move asid_cache() out of ifdef to fix SH-3/4 nommu build.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

12 years agosh: Workaround for __put_user_asm() bug with gcc 4.x on big-endian.
Yoshinori Sato [Mon, 28 Jul 2008 09:36:13 +0000]
sh: Workaround for __put_user_asm() bug with gcc 4.x on big-endian.

I think this problem is GCC(4.1.2) bug.
Syscall "getdents" returned "dirent->d_off" is always 0.
I think other EB enviroment have same problem.

Problem code
0c03c954 <filldir>:
 :
 c03c97a:       58 f7           mov.l   @(28,r15),r8 !-> offset (high)
 c03c97c:       59 f8           mov.l   @(32,r15),r9 !-> offset (low)
 c03c97e:       53 f9           mov.l   @(36,r15),r3
 c03c980:       54 fa           mov.l   @(40,r15),r4
 :
 c03c9a0:       21 82           mov.l   r8,@r1 !offset(high) -> dirent->d_off

It's workaround patch.

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

12 years agosh: Wire up new syscalls.
Paul Mundt [Mon, 28 Jul 2008 09:34:45 +0000]
sh: Wire up new syscalls.

This wires up the signalfd4, eventfd2, epoll_create1, dup3, pipe2, and
inotify_init1 syscalls.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

12 years agosh: fix uImage Entry Point
Yoshihiro Shimoda [Wed, 23 Jul 2008 07:49:06 +0000]
sh: fix uImage Entry Point

fix the problem that cannot boot using uImage when PAGE_SIZE is
8kbyte or 64kbyte.

Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

12 years agosh_keysc: remove request_mem_region() and release_mem_region()
Tetsuya Mukawa [Fri, 18 Jul 2008 22:46:53 +0000]
sh_keysc: remove request_mem_region() and release_mem_region()

Remove request_mem_region() and release_mem_region() from sh_keysc driver.
Those functions can find resource conflict, but it is already checked in
platform_device_add().

Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

12 years agosh: Don't miss pending signals returning to user mode after signal processing
Stuart MENEFY [Thu, 17 Jul 2008 12:08:40 +0000]
sh: Don't miss pending signals returning to user mode after signal processing

Without this patch, signals sent during architecture specific signal
handling (typically as a result of the user's stack being inaccessible)
are ignored.

This is the SH version of commit c3ff8ec31c1249d268cd11390649768a12bec1b9
which was for the i386.

Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

12 years agosh: Use clk_always_enable() on sh7366
Magnus Damm [Thu, 17 Jul 2008 10:20:11 +0000]
sh: Use clk_always_enable() on sh7366

Use clk_always_enable() in the sh7366 processor code.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

12 years agosh: Use clk_always_enable() on sh7343 / SE77343
Magnus Damm [Thu, 17 Jul 2008 10:18:24 +0000]
sh: Use clk_always_enable() on sh7343 / SE77343

Use clk_always_enable() on the sh7343 processor and in the board code
for Solution Engine 7343. Remove duplicate MSTPCR register definitions.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

12 years agosh: Use clk_always_enable() on sh7722 / Migo-R / SE7722
Magnus Damm [Thu, 17 Jul 2008 10:16:11 +0000]
sh: Use clk_always_enable() on sh7722 / Migo-R / SE7722

Use clk_always_enable() on the sh7722 processor and in the board code
for Migo-R and Solution Engine 7722. Remove duplicate MSTPCR register
definitions.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

12 years agosh: Use clk_always_enable() on sh7723 / ap325rxa
Magnus Damm [Thu, 17 Jul 2008 10:13:34 +0000]
sh: Use clk_always_enable() on sh7723 / ap325rxa

Use clk_always_enable() on the sh7723 processor and in the ap325rxa
board code. Remove duplicate MSTPCR register definitions.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

12 years agosh: Introduce clk_always_enable() function
Magnus Damm [Thu, 17 Jul 2008 10:09:51 +0000]
sh: Introduce clk_always_enable() function

Add SuperH specific funcion clk_always_enable(), useful to enable MSTPCR
bits in processor or board specific code.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

12 years agosh: Show all clocks and their state in /proc/clocks
Magnus Damm [Thu, 17 Jul 2008 10:05:54 +0000]
sh: Show all clocks and their state in /proc/clocks

Show all clocks in /proc/clocks, and also show if they are enabled or
disabled. This is useful to show MSTPCR bits on SuperH Mobile processors.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

12 years agosh: Merge sh7343 and sh7722 clock code
Magnus Damm [Thu, 17 Jul 2008 10:02:23 +0000]
sh: Merge sh7343 and sh7722 clock code

This code makes sh7343 share the sh7722 clock code. Instead of just using
the good and very old sh7343 clock implmentation, switch to the new MSTPCR
enabled clock code. SIU clocks are disabled on sh7343 for now.

With this change all SuperH Mobile devices now use the same clock code.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

12 years agosh: Add SuperH Mobile MSTPCR bits to clock framework
Magnus Damm [Thu, 17 Jul 2008 09:56:15 +0000]
sh: Add SuperH Mobile MSTPCR bits to clock framework

Handle module stop clock bits in MSTPCRn through the clock framework.
The clocks are named after the bits in the data sheet. The association
between bit number and hardware block is processor specific.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

12 years agosh: Use arch_flags to simplify sh7722 siu clock code
Magnus Damm [Thu, 17 Jul 2008 09:52:19 +0000]
sh: Use arch_flags to simplify sh7722 siu clock code

Make use of arch_flags to simplify the SIU clock code.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

12 years agosh: Add arch_flags to struct clk
Magnus Damm [Thu, 17 Jul 2008 09:48:57 +0000]
sh: Add arch_flags to struct clk

Add arch_flags to struct clk so we can keep per-clock private data
somewhere and share code between multiple clocks.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

12 years agofix sh ptep_get_and_clear breakage
Adrian Bunk [Wed, 16 Jul 2008 16:45:40 +0000]
fix sh ptep_get_and_clear breakage

Commit 1ea0704e0da65b2b46f9142ff1391163aac24060
(mm: add a ptep_modify_prot transaction abstraction)
triggered on sh build errors like the following:

<--  snip  -->

...
CC arch/sh/mm/pg-sh4.o
cc1: warnings being treated as errors
include2/asm/pgtable.h:139: error: 'ptep_get_and_clear' declared inline after being called
include2/asm/pgtable.h:139: error: previous declaration of 'ptep_get_and_clear' was here
make[2]: *** [arch/sh/mm/pg-sh4.o] Error 1

<--  snip  -->

Since there's no good reason for marking these global functions as
"inline" this patch therefore removes the inline's.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

12 years agosh: Renesas R0P7785LC0011RL board support
Yoshihiro Shimoda [Wed, 16 Jul 2008 11:21:09 +0000]
sh: Renesas R0P7785LC0011RL board support

This adds initial support for the Renesas R0P7785LC0011RL board.
This patch supports 29bit address mode only.

Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

12 years agosh: Add memory chunks to SH-Mobile UIO devices
Magnus Damm [Wed, 16 Jul 2008 10:02:54 +0000]
sh: Add memory chunks to SH-Mobile UIO devices

This patch adds physically contiguous memory chunks to the UIO devices.
The same strategy can be used in the future for the CEU as well.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

12 years agosh: Export sh7366 VPU, VEU(1), VEU(2) using uio_pdrv_genirq
Magnus Damm [Tue, 15 Jul 2008 12:55:03 +0000]
sh: Export sh7366 VPU, VEU(1), VEU(2) using uio_pdrv_genirq

This patch exports the VPU, VEU(1) and VEU(2) blocks of the sh7366
to user space using the uio_pdrv_genirq platform driver.

While at it, fix up the VEU(2) interrupt vector.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

12 years agosh: Export sh7723 VPU, VEU2H0, VEU2H1 using uio_pdrv_genirq
Magnus Damm [Tue, 15 Jul 2008 12:53:33 +0000]
sh: Export sh7723 VPU, VEU2H0, VEU2H1 using uio_pdrv_genirq

This patch exports the VPU, VEU2H0 and VEU2H1 blocks of the sh7723
to user space using the uio_pdrv_genirq platform driver.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

12 years agosh: Export sh7722 VPU and VEU using uio_pdrv_genirq
Magnus Damm [Tue, 15 Jul 2008 12:52:19 +0000]
sh: Export sh7722 VPU and VEU using uio_pdrv_genirq

This patch exports the VPU and VEU blocks of the sh7722 to user space
using the uio_pdrv_genirq platform driver.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

12 years agosh: Export sh7343 VPU and VEU using uio_pdrv_genirq
Magnus Damm [Tue, 15 Jul 2008 12:51:39 +0000]
sh: Export sh7343 VPU and VEU using uio_pdrv_genirq

This patch exports the VPU and VEU blocks of the sh7343 to user space
using the uio_pdrv_genirq platform driver.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

12 years agosh2(A) exception handler update
Yoshinori Sato [Wed, 9 Jul 2008 16:20:03 +0000]
sh2(A) exception handler update

This patch is

By sh2
- Remove duplicate code
- Reduce stack usage
- Cleanup and little optimize

By sh2a
- Add missing handler(256 to 511)
- Use sh2a instructions handler

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

12 years agosh: update Solution Engine 7343
Yoshihiro Shimoda [Mon, 7 Jul 2008 12:11:54 +0000]
sh: update Solution Engine 7343

updated the following codes for Solution Endine 7343:
 - fix compile error in arch/sh/boards/se/7343/irq.c
 - add nor flash physmaps
 - update defconfig

Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

12 years agosh: update sh7343 code
Yoshihiro Shimoda [Mon, 7 Jul 2008 12:11:51 +0000]
sh: update sh7343 code

updated the following codes for SH7343:
 - add register_intc_controller()
 - add EARLY_SCIF_CONSOLE_PORT
 - add define of CPG register

Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

12 years agosh: fix pg-sh4.c build breakage in linux-next
Magnus Damm [Sat, 5 Jul 2008 03:33:30 +0000]
sh: fix pg-sh4.c build breakage in linux-next

Remove inline from ptep_get_and_clean() to match with header file prototype.
Makes linux-next build.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

12 years agosh: enable I2C on the ap325rxa board
Magnus Damm [Sat, 5 Jul 2008 03:32:44 +0000]
sh: enable I2C on the ap325rxa board

This patch enables I2C on the sh7723-based ap325rxa board.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

12 years agosh: add SuperH Mobile I2C platform data to sh7366
Magnus Damm [Sat, 5 Jul 2008 03:32:23 +0000]
sh: add SuperH Mobile I2C platform data to sh7366

This patch adds platform data for the single I2C channel on sh7366.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

12 years agosh: add SuperH Mobile I2C platform data to sh7723
Magnus Damm [Sat, 5 Jul 2008 03:32:06 +0000]
sh: add SuperH Mobile I2C platform data to sh7723

This patch adds platform data for the single I2C channel on sh7723.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

12 years agosh: add SuperH Mobile I2C platform data to sh7343
Magnus Damm [Sat, 5 Jul 2008 03:31:46 +0000]
sh: add SuperH Mobile I2C platform data to sh7343

This patch adds platform data for two I2C channels to the sh7343.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

12 years agosh: add interrupt ack code to sh4a
Yoshihiro Shimoda [Fri, 4 Jul 2008 03:37:12 +0000]
sh: add interrupt ack code to sh4a

This patch is based on interrupt acknowledge code for external
interrupt sources on sh3 processors and adds on sh4a processors.

Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

12 years agosh: Fix up link error on SH-2 zImage with older binutils.
Yoshinori Sato [Fri, 4 Jul 2008 03:54:51 +0000]
sh: Fix up link error on SH-2 zImage with older binutils.

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

12 years agosh: Conditionally re-enable IRQs in fault path.
Stuart Menefy [Wed, 2 Jul 2008 08:51:23 +0000]
sh: Conditionally re-enable IRQs in fault path.

The current kernel behaviour is to reenable interrupts unconditionally
when taking a page fault. This patch changes this to only enable them
if interrupts were previously enabled.

It also fixes a problem seen with this fix in place: the kernel previously
flushed the vsyscall page when handling a signal, which is not only
unncessary, but caused a possible sleep with interrupts disabled.

Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

12 years agosh: Record the major cut revision for probed SH-4A parts.
Paul Mundt [Wed, 2 Jul 2008 08:46:40 +0000]
sh: Record the major cut revision for probed SH-4A parts.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

12 years agosh: Optimized flush_icache_range() implementation.
Chris Smith [Wed, 2 Jul 2008 06:17:11 +0000]
sh: Optimized flush_icache_range() implementation.

Add implementation of flush_icache_range() suitable for signal handler
and kprobes. Remove flush_cache_sigtramp() and change signal.c to use
flush_icache_range().

Signed-off-by: Chris Smith <chris.smith@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

12 years agosh: Stub in silicon cut in CPU info.
Stuart Menefy [Wed, 2 Jul 2008 06:15:09 +0000]
sh: Stub in silicon cut in CPU info.

Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

12 years agosh: Tidy up the SH-3 exception vector table.
Paul Mundt [Wed, 2 Jul 2008 04:58:38 +0000]
sh: Tidy up the SH-3 exception vector table.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

12 years agoSH7619 add ethernet controler support
Yoshinori Sato [Wed, 2 Jul 2008 02:20:24 +0000]
SH7619 add ethernet controler support

- Add EtherC + PHY resource define.

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

12 years agosh: Remove sh_pcic_io_xxx function from Solution Engine IO code
Nobuhiro Iwamatsu [Tue, 24 Jun 2008 04:00:52 +0000]
sh: Remove sh_pcic_io_xxx function from Solution Engine IO code

sh_pcic_io_xxx function are very old.
In linux-2.4, mrshpc_ss socket driver used this function.
But there is not this driver to the present kernel.
I deleted these cords and checked operation.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

12 years agosh: Fix Kconfig of AP-325RXA
Nobuhiro Iwamatsu [Thu, 19 Jun 2008 10:27:55 +0000]
sh: Fix Kconfig of AP-325RXA

The CPU of AP-325RXA is SH7723, but a CPU becomes selectable.
This patch fixes this problem.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

12 years agosh: Clean up code of Solution Engine 770x
Nobuhiro Iwamatsu [Wed, 18 Jun 2008 09:32:03 +0000]
sh: Clean up code of Solution Engine 770x

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

12 years agosh: Update Solution Enginge 7712 defconfig
Nobuhiro Iwamatsu [Wed, 18 Jun 2008 09:31:46 +0000]
sh: Update Solution Enginge 7712 defconfig

Enable SH-Ether support and NFS userland support.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>