11 years ago9p: rework client code to use new protocol support functions
Eric Van Hensbergen [Thu, 16 Oct 2008 13:30:07 +0000]
9p: rework client code to use new protocol support functions

Now that the new protocol functions are in place, this patch switches
the client code to using the new support code.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

11 years ago9p: remove unnecessary tag field from p9_req_t structure
Eric Van Hensbergen [Thu, 16 Oct 2008 13:29:31 +0000]
9p: remove unnecessary tag field from p9_req_t structure

This removes the vestigial tag field from the p9_req_t structure.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

11 years ago9p: remove 9p fcall debug prints
Eric Van Hensbergen [Thu, 16 Oct 2008 13:29:31 +0000]
9p: remove 9p fcall debug prints

One of the current debug options allows users to get a verbose dump of fcalls.
This isn't really necessary as correctly parsed protocol frames can be printed
as part of the code in the client functions.  The consolidated printfcalls
structure would require new entries to be added for every extension.  This
patch removes the debug print methods and their use.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

11 years ago9p: add new protocol support code
Eric Van Hensbergen [Tue, 14 Oct 2008 01:40:27 +0000]
9p: add new protocol support code

This adds a new protocol processing support code based on Anthony Liguori's
9p library code.  This code performs protocol marshalling/unmarshalling using
printf like strings to represent protocol elements.  It is my intent to use
them to replace the current functions in conv.c as well as the
p9_create_* functions.

This should make the client implementation much more clear, and also make it
much easier to add new protocol extensions by limiting the number of places
in which changes need to be made.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

11 years ago9p: encapsulate version function
Eric Van Hensbergen [Tue, 14 Oct 2008 01:36:14 +0000]
9p: encapsulate version function

Alsmot all 9P client wire functions have their own (set of) functions.
Tversion is an exception as its encapsulated into the client_create code.

This patch moves the protocol specifics of this to a function to match the
rest of the code.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

11 years ago9p: move dirread to fs layer
Eric Van Hensbergen [Tue, 14 Oct 2008 01:36:15 +0000]
9p: move dirread to fs layer

Currently reading a directory is implemented in the client code.
This function is not actually a wire operation, but a meta operation
which calls read operations and processes the results.

This patch moves this functionality to the fs layer and calls component
wire operations instead of constructing their packets.  This provides a
cleaner separation and will help when we reorganize the client functions
and protocol processing methods.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

11 years ago9p: adjust 9p vfs write operation
Eric Van Hensbergen [Tue, 14 Oct 2008 01:36:16 +0000]
9p: adjust 9p vfs write operation

Currently, the 9p net wire operation ensures that all data is sent by sending
multiple packets if the data requested is larger than the msize.  This is
better handled in the vfs code so that we can simplify wire operations to
being concerned with only putting data onto and taking data off of the wire.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

11 years ago9p: move readn meta-function from client to fs layer
Eric Van Hensbergen [Tue, 14 Oct 2008 01:36:16 +0000]
9p: move readn meta-function from client to fs layer

There are a couple of methods in the client code which aren't actually
wire operations.  To keep things organized cleaner, these operations are
being moved to the fs layer.

This patch moves the readn meta-function (which executes multiple wire
reads until a buffer is full) to the fs layer.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

11 years ago9p: consolidate read/write functions
Eric Van Hensbergen [Tue, 14 Oct 2008 01:36:17 +0000]
9p: consolidate read/write functions

Currently there are two separate versions of read and write.  One for
dealing with user buffers and the other for dealing with kernel buffers.
There is a tremendous amount of code duplication in the otherwise
identical versions of these functions.  This patch adds an additional
user buffer parameter to read and write and conditionalizes handling of
the buffer on whether the kernel buffer or the user buffer is populated.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

11 years ago9p: drop broken unused error path from p9_conn_create()
Tejun Heo [Mon, 13 Oct 2008 23:45:20 +0000]
9p: drop broken unused error path from p9_conn_create()

Post p9_fd_poll() error path which checks m->poll_waddr[i] for PTR_ERR
value has the following problems.

* It's completely unused.  Error value is set iff NULL @wait_address
  has been specified to p9_pollwait() which is guaranteed not to
  happen.

* It dereferences @m after deallocating it (introduced by 571ffeaf and
  spotted by Raja R Harinath.

* It returned the wrong value on error.  It should return
  poll_waddr[i] but it returnes poll_waddr (introduced by 571ffeaf).

* p9_mux_poll_stop() doesn't handle PTR_ERR value.  It will try to
  operate on the PTR_ERR value as if it's a normal pointer and cause
  oops.

As the error path is bogus in the first place, there's no reason to
hold onto it.  Kill it.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Raja R Harinath <harinath@hurrynot.org>

11 years ago9p: make rpc code common and rework flush code
Eric Van Hensbergen [Mon, 13 Oct 2008 23:45:21 +0000]
9p: make rpc code common and rework flush code

This code moves the rpc function to the common client base,
reorganizes the flush code to be more simple and stable, and
makes the necessary adjustments to the underlying transports
to adapt to the new structure.

This reduces the overall amount of code duplication between the
transports and should make adding new transports more straightforward.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

11 years ago9p: use the rcall structure passed in the request in trans_fd read_work
Eric Van Hensbergen [Mon, 13 Oct 2008 23:45:22 +0000]
9p: use the rcall structure passed in the request in trans_fd read_work

This patch reworks the read_work function to enable it to directly use a passed
in rcall structure.  This should help allow us to remove unnecessary copies
in the future.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

11 years ago9p: apply common request code to trans_fd
Eric Van Hensbergen [Mon, 13 Oct 2008 23:45:22 +0000]
9p: apply common request code to trans_fd

Apply the now common p9_req_t structure to the fd transport.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

11 years ago9p: apply common tagpool handling to trans_fd
Eric Van Hensbergen [Mon, 13 Oct 2008 23:45:22 +0000]
9p: apply common tagpool handling to trans_fd

Simplify trans_fd by using new common client tagpool structure.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

11 years ago9p: move request management to client code
Eric Van Hensbergen [Mon, 13 Oct 2008 23:45:23 +0000]
9p: move request management to client code

The virtio transport uses a simplified request management system
that I want to use for all transports.  This patch adapts and moves the
exisiting code for managing requests to the client common code.
Later patches will apply these mechanisms to the other transports.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

11 years ago9p: eliminate callback complexity
Eric Van Hensbergen [Mon, 13 Oct 2008 23:45:23 +0000]
9p: eliminate callback complexity

The current trans_fd rpc mechanisms use a dynamic callback mechanism which
introduces a lot of complexity which only accomodates a single special case.
This patch removes much of that complexity in favor of a simple exception
mechanism to deal with flushes.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

11 years ago9p: consolidate mux_rpc and request structure
Eric Van Hensbergen [Mon, 13 Oct 2008 23:45:24 +0000]
9p: consolidate mux_rpc and request structure

Currently, trans_fd has two structures (p9_req and p9_mux-rpc)
which contain mostly duplicate data.

This patch consolidates these two structures and removes p9_mux_rpc.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

11 years ago9p: remove unnecessary prototypes
Eric Van Hensbergen [Mon, 13 Oct 2008 23:45:24 +0000]
9p: remove unnecessary prototypes

Cleanup files by reordering functions in order to remove need for
unnecessary function prototypes.

There are no code changes here, just functions being moved around and
prototypes being eliminated.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

11 years ago9p: remove duplicate client state
Eric Van Hensbergen [Mon, 13 Oct 2008 23:45:24 +0000]
9p: remove duplicate client state

Now that we are passing client state into the transport modules, remove
duplicate state which is present in transport private structures.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

11 years ago9p: consolidate transport structure
Eric Van Hensbergen [Mon, 13 Oct 2008 23:45:25 +0000]
9p: consolidate transport structure

Right now there is a transport module structure which provides per-transport
type functions and data and a transport structure which contains per-instance
public data as well as function pointers to instance specific functions.

This patch moves public transport visible instance data to the client
structure (which in some cases had duplicate data) and consolidates the
functions into the transport module structure.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

11 years ago9p-trans_fd: use single poller
Tejun Heo [Mon, 13 Oct 2008 23:45:25 +0000]
9p-trans_fd: use single poller

trans_fd used pool of upto 100 pollers to monitor the r/w fds.  The
approach makes sense in userspace back when the only available
interfaces were poll(2) and select(2).  As each event monitor -
trigger - handling iteration took O(n) where `n' is the number of
watched fds, it makes sense to spread them to many pollers such that
the `n' can be divided by the number of pollers.  However, this
doesn't make any sense in kernel because persistent edge triggered
event monitoring is how the whole thing is implemented in the kernel
in the first place.

This patch converts trans_fd to use single poller which watches all
the fds instead of the poll of pollers approach.  All the fds are
registered for monitoring on creation and only the fds with pending
events are scanned when something happens much like how epoll is
implemented.

This change makes trans_fd fd monitoring more efficient and simpler.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

11 years ago{pci,pnp} quirks.c: don't use deprecated print_fn_descriptor_symbol()
Linus Torvalds [Thu, 16 Oct 2008 23:11:43 +0000]
{pci,pnp} quirks.c: don't use deprecated print_fn_descriptor_symbol()

I dunno how this missed Bjorn and his quest to use %pF in commit
c80cfb0406c01bb5da91bfe30f5cb1fd96831138 ("vsprintf: use new vsprintf
symbolic function pointer format"), but it did.

So use %pF in the two remaining places that still tried to print out
function pointers by hand.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoMerge git://git.linux-nfs.org/projects/trondmy/nfs-2.6
Linus Torvalds [Thu, 16 Oct 2008 22:39:20 +0000]
Merge git://git.linux-nfs.org/projects/trondmy/nfs-2.6

* git://git.linux-nfs.org/projects/trondmy/nfs-2.6: (53 commits)
  NFS: Fix a resolution problem with nfs_inode->cache_change_attribute
  NFS: Fix the resolution problem with nfs_inode_attrs_need_update()
  NFS: Changes to inode->i_nlinks must set the NFS_INO_INVALID_ATTR flag
  RPC/RDMA: ensure connection attempt is complete before signalling.
  RPC/RDMA: correct the reconnect timer backoff
  RPC/RDMA: optionally emit useful transport info upon connect/disconnect.
  RPC/RDMA: reformat a debug printk to keep lines together.
  RPC/RDMA: harden connection logic against missing/late rdma_cm upcalls.
  RPC/RDMA: fix connect/reconnect resource leak.
  RPC/RDMA: return a consistent error, when connect fails.
  RPC/RDMA: adhere to protocol for unpadded client trailing write chunks.
  RPC/RDMA: avoid an oops due to disconnect racing with async upcalls.
  RPC/RDMA: maintain the RPC task bytes-sent statistic.
  RPC/RDMA: suppress retransmit on RPC/RDMA clients.
  RPC/RDMA: fix connection IRD/ORD setting
  RPC/RDMA: support FRMR client memory registration.
  RPC/RDMA: check selected memory registration mode at runtime.
  RPC/RDMA: add data types and new FRMR memory registration enum.
  RPC/RDMA: refactor the inline memory registration code.
  NFS: fix nfs_parse_ip_address() corner case
  ...

11 years agoMerge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Thu, 16 Oct 2008 22:38:48 +0000]
Merge branch 'sched-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched_clock: prevent scd->clock from moving backwards

11 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
Linus Torvalds [Thu, 16 Oct 2008 22:36:58 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: us122l: fix missing unlock in usb_stream_hwdep_vm_fault()
  ALSA: hda - Fix quirk lists for realtek codecs
  ALSA: hda - Add support of ALC272
  ALSA: hda - Add ALC887 support
  ALSA: hda - Add ALC1200 support
  ALSA: hda - Fix PCI SSID of ASUS M90V
  ALSA: hda - Add auto mic switch in realtek auto-probe mode
  ALSA: Fix pxa2xx-ac97-lib.c compilation
  ALSA: ASoC: Hide TLV320AIC26 configuration option for non-OpenFirwmare users
  ALSA: hda: fix nid variable warning
  ALSA: ASoC: Fix compile-time warning for tlv320aic23.c

11 years agoMerge branch 'kvm-updates/2.6.28' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Thu, 16 Oct 2008 22:36:00 +0000]
Merge branch 'kvm-updates/2.6.28' of git://git./linux/kernel/git/avi/kvm

* 'kvm-updates/2.6.28' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm: (134 commits)
  KVM: ia64: Add intel iommu support for guests.
  KVM: ia64: add directed mmio range support for kvm guests
  KVM: ia64: Make pmt table be able to hold physical mmio entries.
  KVM: Move irqchip_in_kernel() from ioapic.h to irq.h
  KVM: Separate irq ack notification out of arch/x86/kvm/irq.c
  KVM: Change is_mmio_pfn to kvm_is_mmio_pfn, and make it common for all archs
  KVM: Move device assignment logic to common code
  KVM: Device Assignment: Move vtd.c from arch/x86/kvm/ to virt/kvm/
  KVM: VMX: enable invlpg exiting if EPT is disabled
  KVM: x86: Silence various LAPIC-related host kernel messages
  KVM: Device Assignment: Map mmio pages into VT-d page table
  KVM: PIC: enhance IPI avoidance
  KVM: MMU: add "oos_shadow" parameter to disable oos
  KVM: MMU: speed up mmu_unsync_walk
  KVM: MMU: out of sync shadow core
  KVM: MMU: mmu_convert_notrap helper
  KVM: MMU: awareness of new kvm_mmu_zap_page behaviour
  KVM: MMU: mmu_parent_walk
  KVM: x86: trap invlpg
  KVM: MMU: sync roots on mmu reload
  ...

11 years agoFix kernel/softirq.c printk format warning properly
Linus Torvalds [Thu, 16 Oct 2008 22:32:46 +0000]
Fix kernel/softirq.c printk format warning properly

This fixes the broken 77af7e3403e7314c47b0c07fbc5e4ef21d939532
("softirq, warning fix: correct a format to avoid a warning") fix
correctly.

The type of a pointer subtraction is not "int", nor is it "long".  It
can be either (or something else).  It's "ptrdiff_t", and the printk
format for it is "%td".

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoMerge branch 'core-v28-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Thu, 16 Oct 2008 22:17:40 +0000]
Merge branch 'core-v28-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'core-v28-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  do_generic_file_read: s/EINTR/EIO/ if lock_page_killable() fails
  softirq, warning fix: correct a format to avoid a warning
  softirqs, debug: preemption check
  x86, pci-hotplug, calgary / rio: fix EBDA ioremap()
  IO resources, x86: ioremap sanity check to catch mapping requests exceeding, fix
  IO resources, x86: ioremap sanity check to catch mapping requests exceeding the BAR sizes
  softlockup: Documentation/sysctl/kernel.txt: fix softlockup_thresh description
  dmi scan: warn about too early calls to dmi_check_system()
  generic: redefine resource_size_t as phys_addr_t
  generic: make PFN_PHYS explicitly return phys_addr_t
  generic: add phys_addr_t for holding physical addresses
  softirq: allocate less vectors
  IO resources: fix/remove printk
  printk: robustify printk, update comment
  printk: robustify printk, fix #2
  printk: robustify printk, fix
  printk: robustify printk

Fixed up conflicts in:
arch/powerpc/include/asm/types.h
arch/powerpc/platforms/Kconfig.cputype
manually.

11 years agoMerge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Thu, 16 Oct 2008 22:08:45 +0000]
Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: fix compat-vdso
  x86/mm: unify init task OOM handling
  x86/mm: do not trigger a kernel warning if user-space disables interrupts and generates a page fault

11 years agoFRV: Eliminate NULL test and memset after alloc_bootmem
Julia Lawall [Wed, 15 Oct 2008 15:51:04 +0000]
FRV: Eliminate NULL test and memset after alloc_bootmem

As noted by Akinobu Mita in patch b1fceac2b9e04d278316b2faddf276015fc06e3b,
alloc_bootmem and related functions never return NULL and always return a
zeroed region of memory.  Thus a NULL test or memset after calls to these
functions is unnecessary.

 arch/frv/mm/init.c |    2 --
 1 file changed, 2 deletions(-)

This was fixed using the following semantic patch.
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@
expression E;
statement S;
@@

E = \(alloc_bootmem\|alloc_bootmem_low\|alloc_bootmem_pages\|alloc_bootmem_low_pages\)(...)
... when != E
(
- BUG_ON (E == NULL);
|
- if (E == NULL) S
)

@@
expression E,E1;
@@

E = \(alloc_bootmem\|alloc_bootmem_low\|alloc_bootmem_pages\|alloc_bootmem_low_pages\)(...)
... when != E
- memset(E,0,E1);
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoFRV: Switch unaligned access to the packed-struct implementation
Harvey Harrison [Wed, 15 Oct 2008 15:50:59 +0000]
FRV: Switch unaligned access to the packed-struct implementation

Switch unaligned access to the packed-struct implementation for BE accesses as
this reduces the size of the kernel a little.  LE still uses the byte shift.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoFRV: Provide dma_map_page() for NOMMU and fix comments
David Howells [Wed, 15 Oct 2008 15:50:53 +0000]
FRV: Provide dma_map_page() for NOMMU and fix comments

Provide dma_map_page() for the NOMMU-mode FRV arch.

Also do some fixing on the comments attached to the various DMA functions for
both MMU and NOMMU mode FRV code.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agofrv: use generic pci_enable_resources()
Bjorn Helgaas [Wed, 15 Oct 2008 15:50:48 +0000]
frv: use generic pci_enable_resources()

Use the generic pci_enable_resources() instead of the arch-specific code.

Unlike this arch-specific code, the generic version:
    - checks PCI_NUM_RESOURCES (11), not 6, resources
    - skips resources that have neither IORESOURCE_IO nor IORESOURCE_MEM set
    - skips ROM resources unless IORESOURCE_ROM_ENABLE is set
    - checks for resource collisions with "!r->parent"

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394...
Linus Torvalds [Thu, 16 Oct 2008 22:02:24 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/ieee1394/linux1394-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  firewire: Add more documentation to firewire-cdev.h
  firewire: fix ioctl() return code
  firewire: fix setting tag and sy in iso transmission
  firewire: fw-sbp2: fix another small generation access bug
  firewire: fw-sbp2: enforce s/g segment size limit
  firewire: fw_send_request_sync()
  ieee1394: survive a few seconds connection loss
  ieee1394: nodemgr clean up class iterators
  ieee1394: dv1394, video1394: remove unnecessary expressions
  ieee1394: raw1394: make write() thread-safe
  ieee1394: raw1394: narrow down the state_mutex protected region
  ieee1394: raw1394: replace BKL by local mutex, make ioctl() and mmap() thread-safe
  ieee1394: sbp2: enforce s/g segment size limit
  ieee1394: sbp2: check for DMA mapping failures
  ieee1394: sbp2: stricter dma_sync
  ieee1394: Use DIV_ROUND_UP

11 years agolib: remove defining macros for strict_strto??
Harvey Harrison [Thu, 16 Oct 2008 20:40:35 +0000]
lib: remove defining macros for strict_strto??

Open-code them rather than using defining macros.  The function bodies are now
next to their kerneldoc comments as a bonus.

Add casts to the signed cases as they call into the unsigned versions.

Avoids the sparse warnings:
lib/vsprintf.c:249:1: warning: incorrect type in argument 3 (different signedness)
lib/vsprintf.c:249:1:    expected unsigned long *res
lib/vsprintf.c:249:1:    got long *res
lib/vsprintf.c:249:1: warning: incorrect type in argument 3 (different signedness)
lib/vsprintf.c:249:1:    expected unsigned long *res
lib/vsprintf.c:249:1:    got long *res
lib/vsprintf.c:251:1: warning: incorrect type in argument 3 (different signedness)
lib/vsprintf.c:251:1:    expected unsigned long long *res
lib/vsprintf.c:251:1:    got long long *res
lib/vsprintf.c:251:1: warning: incorrect type in argument 3 (different signedness)
lib/vsprintf.c:251:1:    expected unsigned long long *res
lib/vsprintf.c:251:1:    got long long *res

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agolib: trivial whitespace tidy
Harvey Harrison [Thu, 16 Oct 2008 20:40:35 +0000]
lib: trivial whitespace tidy

Remove extra lines before the EXPORT_SYMBOL()s

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agolib: pull base-guessing logic to helper function
Harvey Harrison [Thu, 16 Oct 2008 20:40:34 +0000]
lib: pull base-guessing logic to helper function

The default base is 10 unless there is a leading zero, in which
case the base will be guessed as 8.

The base will only be guesed as 16 when the string starts with '0x'
the third character is a valid hex digit.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoinit/do_mounts_md.c must #include <linux/delay.h>
Adrian Bunk [Thu, 16 Oct 2008 20:29:21 +0000]
init/do_mounts_md.c must #include <linux/delay.h>

This patch fixes the following compile error caused by commit
589f800bb12c5cd6c9167bbf9bf3cb70cd8e422c ("fastboot: make the raid
autodetect code wait for all devices to init"):

CC init/do_mounts_md.o
  init/do_mounts_md.c: In function 'autodetect_raid':
  init/do_mounts_md.c:285: error: implicit declaration of function 'msleep'
  make[2]: *** [init/do_mounts_md.o] Error 1

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney...
Linus Torvalds [Thu, 16 Oct 2008 19:45:08 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/cooloney/blackfin-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6:
  Blackfin arch: make sure cycles is marked as volatile so gcc doesnt reorder on us
  Blackfin arch: disable CONFIG_HW_RANDOM and CONFIG_DAB in defconfig files
  Blackfin arch: update cache flush prototypes with argument names to make them less mysterious
  Blackfin arch: move bfin_addr_dcachable() and friends into the cacheflush header where it belongs
  Blackfin arch: use the new bfin_addr_dcachable() function
  Blackfin arch: fix bug - build kernel failed at head.S when reprogram clock on all platforms
  Blackfin arch: unify/cleanup cache code
  Blackfin arch: update AD7879 platform resources in board file
  Blackfin arch: Zero out bss region in L1/L2 memory.
  Blackfin arch: add read/write IO accessor functions to Blackfin
  Blackfin arch: fix bug - some serial header files set RTS to an input when they should all be outputs

11 years agoMerge branch 'agp-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied...
Linus Torvalds [Thu, 16 Oct 2008 19:43:49 +0000]
Merge branch 'agp-next' of git://git./linux/kernel/git/airlied/agp-2.6

* 'agp-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/agp-2.6:
  agp/nvidia: Support agp user-memory on nvidia agp.
  agp/amd-k7: Suspend support for AMD K7 GART driver
  agp/intel: Reduce extraneous PCI posting reads during init
  agp: Fix stolen memory counting on G4X.

11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6
Linus Torvalds [Thu, 16 Oct 2008 19:40:26 +0000]
Merge git://git./linux/kernel/git/gregkh/driver-core-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (46 commits)
  UIO: Fix mapping of logical and virtual memory
  UIO: add automata sercos3 pci card support
  UIO: Change driver name of uio_pdrv
  UIO: Add alignment warnings for uio-mem
  Driver core: add bus_sort_breadthfirst() function
  NET: convert the phy_device file to use bus_find_device_by_name
  kobject: Cleanup kobject_rename and !CONFIG_SYSFS
  kobject: Fix kobject_rename and !CONFIG_SYSFS
  sysfs: Make dir and name args to sysfs_notify() const
  platform: add new device registration helper
  sysfs: use ilookup5() instead of ilookup5_nowait()
  PNP: create device attributes via default device attributes
  Driver core: make bus_find_device_by_name() more robust
  usb: turn dev_warn+WARN_ON combos into dev_WARN
  debug: use dev_WARN() rather than WARN_ON() in device_pm_add()
  debug: Introduce a dev_WARN() function
  sysfs: fix deadlock
  device model: Do a quickcheck for driver binding before doing an expensive check
  Driver core: Fix cleanup in device_create_vargs().
  Driver core: Clarify device cleanup.
  ...

11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus
Linus Torvalds [Thu, 16 Oct 2008 19:38:34 +0000]
Merge git://git./linux/kernel/git/rusty/linux-2.6-for-linus

* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  module: remove CONFIG_KMOD in comment after #endif
  remove CONFIG_KMOD from fs
  remove CONFIG_KMOD from drivers

Manually fix conflict due to include cleanups in drivers/md/md.c

11 years agoMerge branch 'personality' of git://git390.osdl.marist.edu/pub/scm/linux-2.6
Linus Torvalds [Thu, 16 Oct 2008 19:32:52 +0000]
Merge branch 'personality' of git://git390.osdl.marist.edu/linux-2.6

* 'personality' of git://git390.osdl.marist.edu/pub/scm/linux-2.6:
  [PATCH] remove unused ibcs2/PER_SVR4 in SET_PERSONALITY

11 years agoMerge branch 'docs' of git://git.lwn.net/linux-2.6
Linus Torvalds [Thu, 16 Oct 2008 19:18:16 +0000]
Merge branch 'docs' of git://git.lwn.net/linux-2.6

* 'docs' of git://git.lwn.net/linux-2.6:
  Document panic_on_unrecovered_nmi sysctl
  Add a reference to paper to SubmittingPatches
  Add kerneldoc documentation for new printk format extensions
  Remove videobook.tmpl
  doc: Test-by?
  Add the development process document
  Documentation/block/data-integrity.txt: Fix section numbers

11 years agoMerge branch 'for-linus' of git://neil.brown.name/md
Linus Torvalds [Thu, 16 Oct 2008 18:55:11 +0000]
Merge branch 'for-linus' of git://neil.brown.name/md

* 'for-linus' of git://neil.brown.name/md:
  md: fix input truncation in safe_delay_store()
  md: check for memory allocation failure in faulty personality
  md: build failure due to missing delay.h
  md: Relax minimum size restrictions on chunk_size.
  md: remove space after function name in declaration and call.
  md: Remove unnecessary #includes, #defines, and function declarations.
  md: Convert remaining 1k representations in linear.c to sectors.
  md: linear.c: Make two local variables sector-based.
  md: linear: Represent dev_info->size and dev_info->offset in sectors.
  md: linear.c: Remove broken debug code.
  md: linear.c: Remove pointless initialization of curr_offset.
  md: linear.c: Fix typo in comment.
  md: Don't try to set an array to 'read-auto' if it is already in that state.
  md: Allow metadata_version to be updated for externally managed metadata.
  md: Fix rdev_size_store with size == 0

11 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Linus Torvalds [Thu, 16 Oct 2008 18:52:08 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (32 commits)
  Input: wm97xx - update email address for Liam Girdwood
  Input: i8042 - add Thinkpad R31 to nomux list
  Input: move map_to_7segment.h to include/linux
  Input: ads7846 - fix cache line sharing issue
  Input: cm109 - add missing newlines to messages
  Input: document i8042.debug in kernel-parameters.txt
  Input: keyboard - fix potential out of bound access to key_map
  Input: psmouse - add OLPC touchpad driver
  Input: psmouse - tweak PSMOUSE_DEFINE_ATTR to support raw set callbacks
  Input: psmouse - add psmouse_queue_work() for ps/2 extension to make use of
  Input: psmouse - export psmouse_set_state for ps/2 extensions to use
  Input: ads7846 - introduce .gpio_pendown to get pendown state
  Input: ALPS - add signature for DualPoint found in Dell Latitude E6500
  Input: serio_raw - allow attaching to translated (SERIO_I8042XL) ports
  Input: cm109 - don't use obsolete logging macros
  Input: atkbd - expand Latitude's force release quirk to other Dells
  Input: bf54x-keys - add power management support
  Input: atmel_tsadcc - improve accuracy
  Input: convert drivers to use strict_strtoul()
  Input: appletouch - handle geyser 3/4 status bits
  ...

11 years agortc: rtc-ds1286 and rtc-m48t35 need <linux/io.h>
Geert Uytterhoeven [Thu, 16 Oct 2008 07:28:47 +0000]
rtc: rtc-ds1286 and rtc-m48t35 need <linux/io.h>

With m68k allmodconfig, I get:

| drivers/rtc/rtc-ds1286.c: In function 'ds1286_rtc_read':
| drivers/rtc/rtc-ds1286.c:33: error: implicit declaration of function '__raw_readl'
| drivers/rtc/rtc-ds1286.c: In function 'ds1286_rtc_write':
| drivers/rtc/rtc-ds1286.c:38: error: implicit declaration of function '__raw_writel'
| drivers/rtc/rtc-ds1286.c: In function 'ds1286_probe':
| drivers/rtc/rtc-ds1286.c:345: error: implicit declaration of function 'ioremap'
| drivers/rtc/rtc-ds1286.c:345: warning: assignment makes pointer from integer without a cast
| drivers/rtc/rtc-ds1286.c:365: error: implicit declaration of function 'iounmap'

and

| drivers/rtc/rtc-m48t35.c: In function 'm48t35_read_time':
| drivers/rtc/rtc-m48t35.c:59: error: implicit declaration of function 'readb'
| drivers/rtc/rtc-m48t35.c:60: error: implicit declaration of function 'writeb'
| drivers/rtc/rtc-m48t35.c: In function 'm48t35_probe':
| drivers/rtc/rtc-m48t35.c:168: error: implicit declaration of function 'ioremap'
| drivers/rtc/rtc-m48t35.c:168: warning: assignment makes pointer from integer without a cast
| drivers/rtc/rtc-m48t35.c:188: error: implicit declaration of function 'iounmap'

Include <linux/io.h> to get access to the I/O API.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoDocument panic_on_unrecovered_nmi sysctl
Bernhard Walle [Tue, 7 Oct 2008 11:21:56 +0000]
Document panic_on_unrecovered_nmi sysctl

This adds "panic_on_unrecovered_nmi" sysctl to
Documentation/filesystems/proc.txt. The text is mainly taken from
http://readlist.com/lists/vger.kernel.org/linux-kernel/43/217998.html.

Signed-off-by: Bernhard Walle <bwalle@suse.de>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

11 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Linus Torvalds [Thu, 16 Oct 2008 18:26:53 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/jikos/hid

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: blacklist additional SoundGraph iMon LCD models
  HID: fix/improve help texts for quirk drivers
  HID: fix default building of HID-quirk drivers

11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Thu, 16 Oct 2008 18:26:26 +0000]
Merge git://git./linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (26 commits)
  decnet: Fix compiler warning in dn_dev.c
  IPV6: Fix default gateway criteria wrt. HIGH/LOW preference radv option
  net/802/fc.c: Fix compilation warnings
  netns: correct mib stats in ip6_route_me_harder()
  netns: fix net_generic array leak
  rt2x00: fix regression introduced by "mac80211: free up 2 bytes in skb->cb"
  rtl8187: Add USB ID for Belkin F5D7050 with RTL8187B chip
  p54usb: Device ID updates
  mac80211: fixme for kernel-doc
  ath9k/mac80211: disallow fragmentation in ath9k, report to userspace
  libertas : Remove unused variable warning for "old_channel" from cmd.c
  mac80211: Fix scan RX processing oops
  orinoco: fix unsafe locking in spectrum_cs_suspend
  orinoco: fix unsafe locking in orinoco_cs_resume
  cfg80211: fix debugfs error handling
  mac80211: fix debugfs netdev rename
  iwlwifi: fix ct kill configuration for 5350
  mac80211: fix HT information element parsing
  p54: Fix compilation problem on PPC
  mac80211: fix debugfs lockup
  ...

11 years agoMerge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Thu, 16 Oct 2008 18:25:32 +0000]
Merge branch 'for-linus' of /home/rmk/linux-2.6-arm

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (51 commits)
  [ARM] 5308/1: Fix Viper ISA IRQ handling
  [ARM] 5307/1: pxa: fix CM-X2XX PCMCIA build error
  [ARM] 5306/1: pxa: fix build error on CM-X270
  [ARM] 5302/1: ARM: OMAP: Revert omap3 WDT changes to avoid merge conflict
  [ARM] 5305/1: ARM: OMAP: Fix compile of McBSP by removing unnecessary check
  [ARM] 5301/1: ARM: OMAP: Add missing irq defines
  ARM: OMAP3: Add default kernel config for OMAP LDP
  ARM: OMAP3: Add basic board support for OMAP LDP
  ARM: OMAP3: Defconfig for the Gumstix Overo board (rev 3)
  ARM: OMAP3: Add support for the Gumstix Overo board (rev 3)
  ARM: OMAP3: Add Beagle defconfig
  ARM: OMAP3: Add minimal Beagle board support
  ARM: OMAP3: Add minimal omap3430 support
  ARM: OMAP2: Fix sparse, checkpatch warnings in OMAP2/3 IRQ code
  ARM: OMAP: Fixes to omap_mcbsp_request function
  ARM: OMAP: Add support for OMAP2430 in McBSP
  ARM: OMAP: Add support for McBSP devices 3 - 5 on 34xx
  ARM: OMAP: Allocate McBSP devices dynamically
  Fix sections for omap-mcbsp platform driver
  [ARM] S3C24XX: Additional include moves
  ...

11 years agodrivers/net/xen-netfront.c: Use DIV_ROUND_UP
Julia Lawall [Thu, 16 Oct 2008 05:05:23 +0000]
drivers/net/xen-netfront.c: Use DIV_ROUND_UP

The kernel.h macro DIV_ROUND_UP performs the computation (((n) + (d) - 1) /
(d)) but is perhaps more readable.

An extract of the semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@haskernel@
@@

#include <linux/kernel.h>

@depends on haskernel@
expression n,d;
@@

(
- (n + d - 1) / d
+ DIV_ROUND_UP(n,d)
|
- (n + (d - 1)) / d
+ DIV_ROUND_UP(n,d)
)

@depends on haskernel@
expression n,d;
@@

- DIV_ROUND_UP((n),d)
+ DIV_ROUND_UP(n,d)

@depends on haskernel@
expression n,d;
@@

- DIV_ROUND_UP(n,(d))
+ DIV_ROUND_UP(n,d)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agomake kprobes.c:kretprobe_table_lock() static
Adrian Bunk [Thu, 16 Oct 2008 05:05:20 +0000]
make kprobes.c:kretprobe_table_lock() static

Make the needlessly global kretprobe_table_lock() static.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agomake hp_wmi_notify() static
Adrian Bunk [Thu, 16 Oct 2008 05:05:17 +0000]
make hp_wmi_notify() static

Make the needlessly global hp_wmi_notify() static.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoipc/sem.c: make free_un() static
Adrian Bunk [Thu, 16 Oct 2008 05:05:16 +0000]
ipc/sem.c: make free_un() static

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoresource: add resource_type() and IORESOURCE_TYPE_BITS
Magnus Damm [Thu, 16 Oct 2008 05:05:15 +0000]
resource: add resource_type() and IORESOURCE_TYPE_BITS

Add resource_type() and IORESOURCE_TYPE_BITS.  They make it easier to add
more resource types without having to rewrite tons of code.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoresources: tidy __request_region()
Bjorn Helgaas [Thu, 16 Oct 2008 05:05:14 +0000]
resources: tidy __request_region()

No functional change.  Just return NULL for kzalloc failure immediately,
rather than wrapping the whole function body in the body of an "if".

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoGRU driver: minor updates
Jack Steiner [Thu, 16 Oct 2008 05:05:13 +0000]
GRU driver: minor updates

A few minor updates for the GRU driver.
- documentation changes found in code reviews
- changes to #ifdefs to make them recognized by "unifdef"
  (used in simulator testing)
- change GRU context load/unload to prefetch data

[akpm@linux-foundation.org: fix typo in comment]
Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoConfigure out AIO support
Thomas Petazzoni [Thu, 16 Oct 2008 05:05:12 +0000]
Configure out AIO support

This patchs adds the CONFIG_AIO option which allows to remove support
for asynchronous I/O operations, that are not necessarly used by
applications, particularly on embedded devices. As this is a
size-reduction option, it depends on CONFIG_EMBEDDED. It allows to
save ~7 kilobytes of kernel code/data:

   text    data     bss     dec     hex filename
1115067  119180  217088 1451335  162547 vmlinux
1108025  119048  217088 1444161  160941 vmlinux.new
  -7042    -132       0   -7174   -1C06 +/-

This patch has been originally written by Matt Mackall
<mpm@selenic.com>, and is part of the Linux Tiny project.

[randy.dunlap@oracle.com: build fix]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: Zach Brown <zach.brown@oracle.com>
Signed-off-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agow1: new driver. DS2431 chip
Bernhard Weirich [Thu, 16 Oct 2008 05:05:11 +0000]
w1: new driver. DS2431 chip

[akpm@linux-foundation.org: minor fixlets and cleanups]
Signed-off-by: Bernhard Weirich <bernhard.weirich@riedel.net>
Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Cc: Ben Gardner <bgardner@wabtec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoW1: ds2490.c optimize ds_set_pullup
David Fries [Thu, 16 Oct 2008 05:05:10 +0000]
W1: ds2490.c optimize ds_set_pullup

Optimize the ds_set_pullup function.  For a strong pullup to be sent the
ds2490 has to have both the strong pullup mode enabled, and the specific
write operation has to have the SPU bit enabled.  Previously the write
always had the SPU bit enabled and both the duration and model was set
when a strong pullup was requested.  Now the strong pullup mode is enabled
at initialization time, the delay is updated only when the value changes,
and the write SPU bit is set only when a strong pullup is required.  This
removes two or three bus transactions per strong pullup request.

Signed-off-by: David Fries <david@fries.net>
Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoW1: Documentation/w1/masters/ds2490 update
David Fries [Thu, 16 Oct 2008 05:05:09 +0000]
W1: Documentation/w1/masters/ds2490 update

Provide some additional details about the status of the driver and the
ds2490 hardware.

Signed-off-by: David Fries <david@fries.net>
Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoW1: ds2490.c ds_write_block remove extra ds_wait_status
David Fries [Thu, 16 Oct 2008 05:05:09 +0000]
W1: ds2490.c ds_write_block remove extra ds_wait_status

Drop the extra ds_wait_status() in ds_write_block().

Signed-off-by: David Fries <david@fries.net>
Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoW1: ds2490.c magic number work
David Fries [Thu, 16 Oct 2008 05:05:08 +0000]
W1: ds2490.c magic number work

This replaces some magic numbers with marcos and corrects one marco.

Signed-off-by: David Fries <david@fries.net>
Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoW1: ds2490.c reset ds2490 in init
David Fries [Thu, 16 Oct 2008 05:05:08 +0000]
W1: ds2490.c reset ds2490 in init

Reset the device in init as it can be in a bad state.  This is necessary
because a block write will wait for data to be placed in the output buffer
and block any later commands which will keep accumulating and the device
will not be idle.  Another case is removing the ds2490 module while a bus
search is in progress, somehow a few commands get through, but the input
transfers fail leaving data in the input buffer.  This will cause the next
read to fail see the note in ds_recv_data.

Signed-off-by: David Fries <david@fries.net>
Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoW1: ds2490.c ds_reset remove ds_wait_status
David Fries [Thu, 16 Oct 2008 05:05:07 +0000]
W1: ds2490.c ds_reset remove ds_wait_status

ds_reset no longer calls ds_wait_status, the result wasn't used and it
would only delay the following data operations.

Signed-off-by: David Fries <david@fries.net>
Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoW1: ds2490.c ds_dump_status rework
David Fries [Thu, 16 Oct 2008 05:05:06 +0000]
W1: ds2490.c ds_dump_status rework

- add result register #defines
- rename ds_dump_status to ds_print_msg
- rename ds_recv_status to ds_dump_status
- ds_dump_status prints the requested status and no longer reads the
  status, this is because the second status read can return different
  data for example the result register
- the result register will be printed, though limited to detecting a
  new device, detecting other values such as a short would require
  additional reporting methods
- ST_EPOF was moved to ds_wait_status to clear the error condition
  sooner

Signed-off-by: David Fries <david@fries.net>
Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoW1: ds2490.c simplify and fix ds_touch_bit
David Fries [Thu, 16 Oct 2008 05:05:05 +0000]
W1: ds2490.c simplify and fix ds_touch_bit

Simplify and fix ds_touch_bit.  If a device is attached in the middle of a
bus search the status register will return more than the default 16 bytes.
 The additional bytes indicate that it has detected a new device.  The way
ds_wait_status is coded, if it doesn't read 16 status bytes it returns an
error value.  ds_touch_bit then will detect that error and return an
error.  In that case it doesn't read the input buffer and returns
uninitialized data.  It doesn't stop there.  The next transaction will not
expect the extra byte in the input buffer and the short read will cause an
error and clear out both the old byte and new data in the input buffer.

Just ignore the value of ds_wait_status.  It is still required to wait
until ds2490 is again idle and there is data to read when ds_recv_data is
called.  This also removes the while loop.  None of the other commands
wait and verify that the issued command is in the status register.

Signed-off-by: David Fries <david@fries.net>
Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoW1: ds2490.c disable bit read and write
David Fries [Thu, 16 Oct 2008 05:05:04 +0000]
W1: ds2490.c disable bit read and write

Don't export read and write bit operations, they didn't work, they weren't
used, and they can't be made to work.  The one wire low level bit
operations expect to set high or low levels, the ds2490 hardware only
supports complete read or write time slots, better to just comment them
out.

Signed-off-by: David Fries <david@fries.net>
Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoW1: ds2490.c ds_write_bit, grouping error, disable readback
David Fries [Thu, 16 Oct 2008 05:05:04 +0000]
W1: ds2490.c ds_write_bit, grouping error, disable readback

ds_write_bit doesn't read the input buffer, so add COMM_ICP and a comment
that it will no longer generate a read back data byte.  If there is an
extra data byte later on then it will cause an error and discard what data
was there.  Corrected operator ordering for ds_send_control.

Signed-off-by: David Fries <david@fries.net>
Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoW1: ds2490.c add support for strong pullup
David Fries [Thu, 16 Oct 2008 05:05:03 +0000]
W1: ds2490.c add support for strong pullup

Add strong pullup support for ds2490 driver, also drop mdelay(750), which
busy waits, usage in favour of msleep for long delays.  Now with msleep
only being called when the strong pullup is active, one wire bus
operations are only taking minimal system overhead.

The new set_pullup will only enable the strong pullup when requested,
which is expected to be the only write operation that will benefit from a
strong pullup.

Signed-off-by: David Fries <david@fries.net>
Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoW1: ds2490.c correct print message
David Fries [Thu, 16 Oct 2008 05:05:02 +0000]
W1: ds2490.c correct print message

Corrected print message, it was writing not reading, this also prints the
endpoint used for the write instead of hardcoding it.  Failed to write
1-wire data to ep0x%x: err=%d.

Signed-off-by: David Fries <david@fries.net>
Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoW1: ds1wm.c msleep for reset
David Fries [Thu, 16 Oct 2008 05:05:01 +0000]
W1: ds1wm.c msleep for reset

Like the previous w1_io.c reset coments and msleep patch, I don't have the
hardware to verify the change, but I think it is safe.  It also helps to
see a comment like this in the code.  "We'll wait a bit longer just to be
sure." If they are going to calculate delaying 324.9us, but actually delay
500us, why not just give up the CPU and sleep?  This is designed for a
battery powered ARM system, avoiding busywaiting has to be good for
battery life.

I sent a request for testers March 7, 2008 to the Linux kernel mailing
list and two developers who have patches for ds1wm.c, but I didn't get
any respons.

Signed-off-by: David Fries <david@fries.net>
Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoW1: w1_io.c reset comments and msleep
David Fries [Thu, 16 Oct 2008 05:05:01 +0000]
W1: w1_io.c reset comments and msleep

w1_reset_bus, added some comments about the timing and switched to msleep
for the later delay.  I don't have the hardware to test the sleep after
reset change.  The one wire doesn't have a timing requirement between
commands so it is fine.  I do have the USB hardware and it would be in big
trouble with 10ms interrupt transfers to find that the reset completed.

Signed-off-by: David Fries <david@fries.net>
Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoW1: w1.c s/printk/dev_dbg/
David Fries [Thu, 16 Oct 2008 05:04:58 +0000]
W1: w1.c s/printk/dev_dbg/

s/printk/dev_dbg/

Signed-off-by: David Fries <david@fries.net>
Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoW1: w1_int.c use first available master number
David Fries [Thu, 16 Oct 2008 05:04:53 +0000]
W1: w1_int.c use first available master number

Follow the example of other devices (like the joystick device).  Pick the
first available id for each detected device.  Currently for USB devices,
suspending and resuming would cause the number to increment.

Signed-off-by: David Fries <david@fries.net>
Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoW1: w1_therm consistent mutex access code cleanup
David Fries [Thu, 16 Oct 2008 05:04:52 +0000]
W1: w1_therm consistent mutex access code cleanup

sl->master->mutex and dev->mutex refer to the same mutex variable, but be
consistent and use the same set of pointers for the lock and unlock calls.
 It is less confusing (and one less pointer dereference this way).

Signed-off-by: David Fries <david@fries.net>
Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoW1: w1_family, remove unused variable need_exit
David Fries [Thu, 16 Oct 2008 05:04:52 +0000]
W1: w1_family, remove unused variable need_exit

Removed the w1_family structure member variable need_exit.  It was only
being set and never used.  Even if it were to be used it is a polling type
operation.

Signed-off-by: David Fries <david@fries.net>
Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoW1: w1_therm fix user buffer overflow and cat
David Fries [Thu, 16 Oct 2008 05:04:51 +0000]
W1: w1_therm fix user buffer overflow and cat

Fixed data reading bug by replacing binary attribute with device one.

Switching the sysfs read from bin_attribute to device_attribute.  The data
is far under PAGE_SIZE so the binary interface isn't required.  As the
device_attribute interface will make one call to w1_therm_read per file
open and buffer, the result is, the following problems go away.

buffer overflow:
Execute a short read on w1_slave and w1_therm_read_bin would still
return the full string size worth of data clobbering the user space
buffer when it returned.  Switching to device_attribute avoids the
buffer overflow problems.  With the snprintf formatted output dealing
with short reads without doing a conversion per read would have
been difficult.
bad behavior:
`cat w1_slave` would cause two temperature conversions to take place.
Previously the code assumed W1_SLAVE_DATA_SIZE would be returned with
each read.  It would not return 0 unless the offset was less
than W1_SLAVE_DATA_SIZE.  The result was the first read did a
temperature conversion, filled the buffer and returned, the
offset in the second read would be less than
W1_SLAVE_DATA_SIZE and also fill the buffer and return, the
third read would finnally have a big enough offset to return 0
and cause cat to stop.  Now w1_therm_read will be called at
most once per open.

Signed-off-by: David Fries <david@fries.net>
Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoW1: w1_slave_read_id read bug, use device_attribute
David Fries [Thu, 16 Oct 2008 05:04:50 +0000]
W1: w1_slave_read_id read bug, use device_attribute

Fix bug reading the id sysfs file.  If less than the full 8 bytes were
read, the next read would start at the first byte instead of continuing.
It needed the offset added to memcpy, or the better solution was to
replace it with the device attribute instead of bin attribute.

Signed-off-by: David Fries <david@fries.net>
Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoW1: Document add, remove, search_count, and pullup.
David Fries [Thu, 16 Oct 2008 05:04:47 +0000]
W1: Document add, remove, search_count, and pullup.

Document w1_master_add, w1_master_remove, search_count, and pullup.

Signed-off-by: David Fries <david@fries.net>
Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoW1: new module parameter search_count
David Fries [Thu, 16 Oct 2008 05:04:45 +0000]
W1: new module parameter search_count

Added a new module parameter search_count which allows overriding the
default search count.  -1 continual, 0 disabled, N that many times.

Signed-off-by: David Fries <david@fries.net>
Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoW1: recode w1_slave_found logic
David Fries [Thu, 16 Oct 2008 05:04:44 +0000]
W1: recode w1_slave_found logic

Simplified the logic in w1_slave_found by using the new
w1_attach_slave_device function to find a slave and mark it as active or
add the device if the crc checks.

Signed-off-by: David Fries <david@fries.net>
Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoW1: be able to manually add and remove slaves
David Fries [Thu, 16 Oct 2008 05:04:43 +0000]
W1: be able to manually add and remove slaves

sysfs entries were added to manually add and remove slave devices.  This
is useful if the automatic bus searching is disabled, and the device ids
are already known.

[akpm@linux-foundation.org: fix printk types]
Signed-off-by: David Fries <david@fries.net>
Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoW1: feature, w1_therm.c use strong pullup and documentation
David Fries [Thu, 16 Oct 2008 05:04:43 +0000]
W1: feature, w1_therm.c use strong pullup and documentation

Added strong pullup to thermal sensor driver and general documentation on
the sensor.

Signed-off-by: David Fries <david@fries.net>
Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoW1: feature, enable hardware strong pullup
David Fries [Thu, 16 Oct 2008 05:04:42 +0000]
W1: feature, enable hardware strong pullup

Add a strong pullup option to the w1 system.  This supplies extra power
for parasite powered devices.  There is a w1_master_pullup sysfs entry and
enable_pullup module parameter to enable or disable the strong pullup.

The one wire bus requires at a minimum one wire and ground.  The common
wire is used for sending and receiving data as well as supplying power to
devices that are parasite powered of which temperature sensors can be one
example.  The bus must be idle and left high while a temperature
conversion is in progress, in addition the normal pullup resister on
larger networks or even higher temperatures might not supply enough power.
 The pullup resister can't provide too much pullup current, because
devices need to pull the bus down to write a value.  This enables the
strong pullup for supported hardware, which can supply more current when
requested.  Unsupported hardware will just delay with the bus high.

The hardware USB 2490 one wire bus master has a bit on some commands which
will enable the strong pullup as soon as the command finishes executing.
To use strong pullup, call the new w1_next_pullup function to register the
duration.  The next write command will call set_pullup before sending the
data, and reset the duration to zero once it returns.

Switched from simple_strtol to strict_strtol.

Signed-off-by: David Fries <david@fries.net>
Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoW1: w1_process, block or sleep
David Fries [Thu, 16 Oct 2008 05:04:41 +0000]
W1: w1_process, block or sleep

The w1_process thread's sleeping and termination has been modified.
msleep_interruptible was replaced by schedule_timeout and schedule to
allow for kthread_stop and wake_up_process to interrupt the sleep and the
unbounded sleeping when a bus search is disabled.  The W1_MASTER_NEED_EXIT
and flags variable were removed as they were redundant with
kthread_should_stop and kthread_stop.  If w1_process is sleeping,
requesting a search will immediately wake it up rather than waiting for
the end of msleep_interruptible previously.

Signed-off-by: David Fries <david@fries.net>
Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoW1: don't delay search start
David Fries [Thu, 16 Oct 2008 05:04:40 +0000]
W1: don't delay search start

Move the creation of the w1_process thread to after the device has been
initialized.  This way w1_process doesn't have to check to see if it has
been initialized and the bus search can proceed without sleeping.  That
also eliminates two checks in the w1_process loop.  The sleep now happens
at the end of the loop not the beginning.

Also added a comment for why the atomic_set was 2.

Signed-off-by: David Fries <david@fries.net>
Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoW1: abort search early on on exit
David Fries [Thu, 16 Oct 2008 05:04:39 +0000]
W1: abort search early on on exit

Early abort if the master driver or the hardware goes away in the middle
of a bus search operation.  The alternative is to spam the print buffer up
to 64*64 times with read errors in the case of USB.

Signed-off-by: David Fries <david@fries.net>
Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoW1: fix deadlocks and remove w1_control_thread
David Fries [Thu, 16 Oct 2008 05:04:38 +0000]
W1: fix deadlocks and remove w1_control_thread

w1_control_thread was removed which would wake up every second and process
newly registered family codes and complete some final cleanup for a
removed master.  Those routines were moved to the threads that were
previously requesting those operations.  A new function
w1_reconnect_slaves takes care of reconnecting existing slave devices when
a new family code is registered or removed.  The removal case was missing
and would cause a deadlock waiting for the family code reference count to
decrease, which will now happen.  A problem with registering a family code
was fixed.  A slave device would be unattached if it wasn't yet claimed,
then attached at the end of the list, two unclaimed slaves would cause an
infinite loop.

The struct w1_bus_master.search now takes a pointer to the struct
w1_master device to avoid searching for it, which would have caused a
lock ordering deadlock with the removal of w1_control_thread.

Signed-off-by: David Fries <david@fries.net>
Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agodrivers/char/tpm/tpm.c: fix error-path memory leak
Andrew Morton [Thu, 16 Oct 2008 05:04:37 +0000]
drivers/char/tpm/tpm.c: fix error-path memory leak

tpm_register_hardware() leaks devname on an error path.

Addresses http://bugzilla.kernel.org/show_bug.cgi?id=11425

Reported-by: Daniel Marjamki <danielm77@spray.se>
Cc: Debora Velarde <debora@linux.vnet.ibm.com>
Cc: Rajiv Andrade <srajiv@linux.vnet.ibm.com>
Cc: Marcel Selhorst <tpm@selhorst.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoTPM: include "moderated for non-subscribers" notation in MAINTAINERS
Rajiv Andrade [Thu, 16 Oct 2008 05:04:36 +0000]
TPM: include "moderated for non-subscribers" notation in MAINTAINERS

Cc: Eric Paris <eparis@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agotpm: work around bug in Broadcom BCM0102 chipset
Valdis Kletnieks [Thu, 16 Oct 2008 05:04:35 +0000]
tpm: work around bug in Broadcom BCM0102 chipset

Patch tpm-correct-tpm-timeouts-to-jiffies-conversion reveals a bug in the
Broadcom BCM0102 TPM chipset used in the Dell Latitude D820 - although
most of the timeouts are returned in usecs as per the spec, one is
apparently returned in msecs, which results in a too-small value leading
to a timeout when the code treats it as usecs.  To prevent a regression,
we check for the known too-short value and adjust it to a value that makes
things work.

Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Cc: Marcin Obara <marcin_obara@users.sourceforge.net>
Cc: Marcel Selhorst <tpm@selhorst.net>
Cc: Kylene Jo Hall <kjhall@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agotpm: correct tpm timeouts to jiffies conversion
Marcin Obara [Thu, 16 Oct 2008 05:04:34 +0000]
tpm: correct tpm timeouts to jiffies conversion

This patch fixes timeouts conversion to jiffies, by replacing
msecs_to_jiffies() calls with usecs_to_jiffies().  According to TCG TPM
Specification Version 1.2 Revision 103 (pages 166, 167) TPM timeouts and
durations are returned in microseconds (usec) not in miliseconds (msec).

This fixes a long hang while loading TPM driver, if TPM chip starts in
"Idle" state instead of "Ready" state.  Without this patch - 'modprobe'
may hang for 30 seconds or more.

Signed-off-by: Marcin Obara <marcin_obara@users.sourceforge.net>
Cc: Marcel Selhorst <tpm@selhorst.net>
Cc: Kylene Jo Hall <kjhall@us.ibm.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoparport: remove CVS keywords
Adrian Bunk [Thu, 16 Oct 2008 05:04:33 +0000]
parport: remove CVS keywords

Remove CVS keywords that weren't updated for a long time from comments.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoafs: convert to new aops
Nick Piggin [Thu, 16 Oct 2008 05:04:32 +0000]
afs: convert to new aops

Cannot assume writes will fully complete, so this conversion goes the easy
way and always brings the page uptodate before the write.

[dhowells@redhat.com: style tweaks]
Signed-off-by: Nick Piggin <npiggin@suse.de>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoedac i5000: fix thermal issues
Aristeu Rozanski [Thu, 16 Oct 2008 05:04:32 +0000]
edac i5000: fix thermal issues

Make the Thermal messages (temperature got past Tmid) be displayed only
once because:

1) it's the BIOS job to configure and handle the memory throttling
2) if the BIOS is broken or is aware about the condition, flooding the
   system logs won't help anything.
3) According to the specification update for Intel 5000 MCHs, all the
   revisions of this MCH have problems on the thermal sensors, making
   not automatic (a.k.a. intelligent thermal throttling) impossible.

Signed-off-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoedac i5000: fix error messages
Aristeu Rozanski [Thu, 16 Oct 2008 05:04:31 +0000]
edac i5000: fix error messages

Update the i5000_edac messages, making everything pass through the EDAC
(so the log controls will work) and being more specific about the errors.
Also, it makes the miscellaneous errors optional and disabled by default.

As I didn't found anywhere information about M23ERR-M26ERR
(FERR_NF_THERMAL) on FERR_NF_FBD, I'm removing them.

Signed-off-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoedac mpc85xx: add support for mpc8572
Andrew Kilkenny [Thu, 16 Oct 2008 05:04:28 +0000]
edac mpc85xx: add support for mpc8572

This adds support for the dual-core MPC8572 processor.  We have
to support making SPR changes on each core.  Also, since we can
have multiple memory controllers sharing an interrupt, flag the
interrupts with IRQF_SHARED.

Signed-off-by: Andrew Kilkenny <akilkenny@xes-inc.com>
Signed-off-by: Nate Case <ncase@xes-inc.com>
Acked-by: Dave Jiang <djiang@mvista.com>
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoedac: make i82443bxgx_edac coexist with intel_agp
Vladislav Bogdanov [Thu, 16 Oct 2008 05:04:26 +0000]
edac: make i82443bxgx_edac coexist with intel_agp

Fix 443BX/GX MCH suppport in a EDAC.

It makes i82443bxgx_edac coexist with intel_agp using the same approach as
several other EDAC drivers.

Tested on Intel's L443GX with redhat's 2.6.18 with whole EDAC subsystem
backported a while ago.

[root@host ~]# dmesg|grep -iE '(AGP|EDAC)'
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 440GX Chipset.
agpgart: AGP aperture is 64M @ 0xf8000000
EDAC MC: Ver: 2.1.0 Jun 27 2008
EDAC MC0: Giving out device to 'i82443bxgx_edac' 'I82443BXGX': DEV 0000:00:00.0
EDAC PCI0: Giving out device to module 'i82443bxgx_edac' controller 'EDAC PCI controller': DEV '0000:00:00.0' (POLLED)

Signed-off-by: Vladislav Bogdanov <slava@nsys.by>
Cc: Doug Thompson <norsk5@yahoo.com>
Cc: Dave Airlie <airlied@linux.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>