8 years agoKVM: Remove ability to assign a device without iommu support
Alex Williamson [Thu, 12 Jan 2012 10:39:53 +0000]
KVM: Remove ability to assign a device without iommu support

(cherry picked from commit 423873736b78f549fbfa2f715f2e4de7e6c5e1e9)

This option has no users and it exposes a security hole that we
can allow devices to be assigned without iommu protection.  Make
KVM_DEV_ASSIGN_ENABLE_IOMMU a mandatory option.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agoKVM: x86: Prevent starting PIT timers in the absence of irqchip support
Jan Kiszka [Thu, 12 Jan 2012 10:39:52 +0000]
KVM: x86: Prevent starting PIT timers in the absence of irqchip support

(cherry picked from commit 0924ab2cfa98b1ece26c033d696651fd62896c69)

User space may create the PIT and forgets about setting up the irqchips.
In that case, firing PIT IRQs will crash the host:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000128
IP: [<ffffffffa10f6280>] kvm_set_irq+0x30/0x170 [kvm]
...
Call Trace:
 [<ffffffffa11228c1>] pit_do_work+0x51/0xd0 [kvm]
 [<ffffffff81071431>] process_one_work+0x111/0x4d0
 [<ffffffff81071bb2>] worker_thread+0x152/0x340
 [<ffffffff81075c8e>] kthread+0x7e/0x90
 [<ffffffff815a4474>] kernel_thread_helper+0x4/0x10

Prevent this by checking the irqchip mode before starting a timer. We
can't deny creating the PIT if the irqchips aren't set up yet as
current user land expects this order to work.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agoKVM guest: prevent tracing recursion with kvmclock
Avi Kivity [Thu, 12 Jan 2012 10:39:51 +0000]
KVM guest: prevent tracing recursion with kvmclock

(cherry picked from commit 95ef1e52922cf75b1ea2eae54ef886f2cc47eecb)

Prevent tracing of preempt_disable() in get_cpu_var() in
kvm_clock_read(). When CONFIG_DEBUG_PREEMPT is enabled,
preempt_disable/enable() are traced and this causes the function_graph
tracer to go into an infinite recursion. By open coding the
preempt_disable() around the get_cpu_var(), we can use the notrace
version which prevents preempt_disable/enable() from being traced and
prevents the recursion.

Based on a similar patch for Xen from Jeremy Fitzhardinge.

Tested-by: Gleb Natapov <gleb@redhat.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agoALSA: hda - Fix the lost power-setup of seconary pins after PM resume
Takashi Iwai [Wed, 11 Jan 2012 11:34:11 +0000]
ALSA: hda - Fix the lost power-setup of seconary pins after PM resume

commit f2cbba7602383cd9cdd21f0a5d0b8bd1aad47b33 upstream.

When multiple headphone or other detectable output pins are present,
the power-map has to be updated after resume appropriately, but the
current driver doesn't check all pins but only the first pin (since
it's enough to check it for the mute-behavior).  This resulted in the
silent output from the secondary outputs after PM resume.

This patch fixes the problem by checking all pins at (re-)init time.

Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=740347

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agoALSA: hda - Fix the detection of "Loopback Mixing" control for VIA codecs
Takashi Iwai [Tue, 10 Jan 2012 14:16:02 +0000]
ALSA: hda - Fix the detection of "Loopback Mixing" control for VIA codecs

commit 4808d12d1dddb046ec86425e5f6766f02e950292 upstream.

Currently the driver checks only the out_mix_path[] for the primary
output route for judging whether to create the loopback-mixing control
or not.  But, there are cases where aamix-routing is available only on
headphone or speaker paths but not on the primary output path.  So, the
driver ignores such cases inappropriately.

This patch fixes the check of the loopback-mixing control by testing
all mix-routing paths.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agoALSA: hda - Return the error from get_wcaps_type() for invalid NIDs
Takashi Iwai [Tue, 10 Jan 2012 11:41:22 +0000]
ALSA: hda - Return the error from get_wcaps_type() for invalid NIDs

commit 3a90274de3548ebb2aabfbf488cea8e275a73dc6 upstream.

When an invalid NID is given, get_wcaps() returns zero as the error,
but get_wcaps_type() takes it as the normal value and returns a bogus
AC_WID_AUD_OUT value.  This confuses the parser.

With this patch, get_wcaps_type() returns -1 when value 0 is given,
i.e. an invalid NID is passed to get_wcaps().

Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=740118

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agoALSA: hda - Use auto-parser for HP laptops with cx20459 codec
Takashi Iwai [Tue, 10 Jan 2012 07:59:56 +0000]
ALSA: hda - Use auto-parser for HP laptops with cx20459 codec

commit de4da59e480cdf1075b33dbaf8078fc87bc52241 upstream.

These laptops can work well with the auto-parser and their BIOS setups,
and in addition, the auto-parser fixes the problem with S3/S4 where
the unsol event handling is killed after resume due to fallback to the
single-cmd mode.

Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=740115

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agoALSA: ice1724 - Check for ac97 to avoid kernel oops
Pavel Hofman [Thu, 5 Jan 2012 22:05:18 +0000]
ALSA: ice1724 - Check for ac97 to avoid kernel oops

commit e7848163aa2a649d9065f230fadff80dc3519775 upstream.

Cards with identical PCI ids but no AC97 config in EEPROM do not have
the ac97 field initialized. We must check for this case to avoid kernel oops.

Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agoALSA: HDA: Fix automute for Cirrus Logic 421x
David Henningsson [Mon, 2 Jan 2012 11:40:16 +0000]
ALSA: HDA: Fix automute for Cirrus Logic 421x

commit 78e2a928e377d5124932d4399c6c581908b027a0 upstream.

There was a bug in the automute logic causing speakers not to
mute when headphones were plugged in.

Tested-by: Hsin-Yi Chen <hychen@canonical.com>
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agoALSA: HDA: Fix master control for Cirrus Logic 421X
David Henningsson [Mon, 2 Jan 2012 11:40:15 +0000]
ALSA: HDA: Fix master control for Cirrus Logic 421X

commit 40d03e63e91af8ddccdfd5a536cc2a6e51433e1d upstream.

The control name "HP/Speakers" is non-standard, and since there is
only one DAC on this chip there is no need for a virtual master
anyway.

Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agoALSA: snd-usb-us122l: Delete calls to preempt_disable
Karsten Wiese [Fri, 30 Dec 2011 00:42:01 +0000]
ALSA: snd-usb-us122l: Delete calls to preempt_disable

commit d0f3a2eb9062560bebca8b923424f3ca02a331ba upstream.

They are not needed here.

Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agoext4: fix undefined behavior in ext4_fill_flex_info()
Xi Wang [Tue, 10 Jan 2012 16:51:10 +0000]
ext4: fix undefined behavior in ext4_fill_flex_info()

commit d50f2ab6f050311dbf7b8f5501b25f0bf64a439b upstream.

Commit 503358ae01b70ce6909d19dd01287093f6b6271c ("ext4: avoid divide by
zero when trying to mount a corrupted file system") fixes CVE-2009-4307
by performing a sanity check on s_log_groups_per_flex, since it can be
set to a bogus value by an attacker.

sbi->s_log_groups_per_flex = sbi->s_es->s_log_groups_per_flex;
groups_per_flex = 1 << sbi->s_log_groups_per_flex;

if (groups_per_flex < 2) { ... }

This patch fixes two potential issues in the previous commit.

1) The sanity check might only work on architectures like PowerPC.
On x86, 5 bits are used for the shifting amount.  That means, given a
large s_log_groups_per_flex value like 36, groups_per_flex = 1 << 36
is essentially 1 << 4 = 16, rather than 0.  This will bypass the check,
leaving s_log_groups_per_flex and groups_per_flex inconsistent.

2) The sanity check relies on undefined behavior, i.e., oversized shift.
A standard-confirming C compiler could rewrite the check in unexpected
ways.  Consider the following equivalent form, assuming groups_per_flex
is unsigned for simplicity.

groups_per_flex = 1 << sbi->s_log_groups_per_flex;
if (groups_per_flex == 0 || groups_per_flex == 1) {

We compile the code snippet using Clang 3.0 and GCC 4.6.  Clang will
completely optimize away the check groups_per_flex == 0, leaving the
patched code as vulnerable as the original.  GCC keeps the check, but
there is no guarantee that future versions will do the same.

Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agodrivers/rtc/interface.c: fix alarm rollover when day or month is out-of-range
Ben Hutchings [Tue, 10 Jan 2012 23:11:02 +0000]
drivers/rtc/interface.c: fix alarm rollover when day or month is out-of-range

commit e74a8f2edb92cb690b467cea0ab652c509e9f624 upstream.

Commit f44f7f96a20a ("RTC: Initialize kernel state from RTC") introduced a
potential infinite loop.  If an alarm time contains a wildcard month and
an invalid day (> 31), or a wildcard year and an invalid month (>= 12),
the loop searching for the next matching date will never terminate.  Treat
the invalid values as wildcards.

Fixes <http://bugs.debian.org/646429>, <http://bugs.debian.org/653331>

Reported-by: leo weppelman <leoweppelman@googlemail.com>
Reported-by: "P. van Gaans" <mailme667@yahoo.co.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agomtd: tests: stresstest: bail out if device has not enough eraseblocks
Wolfram Sang [Tue, 29 Nov 2011 14:34:08 +0000]
mtd: tests: stresstest: bail out if device has not enough eraseblocks

commit 2f4478ccff7df845dc9c0f8996a96373122c4417 upstream.

stresstest needs at least two eraseblocks. Bail out gracefully if that
condition is not met. Fixes the following 'division by zero' OOPS:

[  619.100000] mtd_stresstest: MTD device size 131072, eraseblock size 131072, page size 2048, count of eraseblocks 1, pages per eraseblock 64, OOB size 64
[  619.120000] mtd_stresstest: scanning for bad eraseblocks
[  619.120000] mtd_stresstest: scanned 1 eraseblocks, 0 are bad
[  619.130000] mtd_stresstest: doing operations
[  619.130000] mtd_stresstest: 0 operations done
[  619.140000] Division by zero in kernel.
...

caused by

        /* Read or write up 2 eraseblocks at a time - hence 'ebcnt - 1' */
        eb %= (ebcnt - 1);

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agomtd: mtd_blkdevs: don't increase 'open' count on error path
Brian Norris [Mon, 7 Nov 2011 23:51:05 +0000]
mtd: mtd_blkdevs: don't increase 'open' count on error path

commit 342ff28f5a2e5aa3236617bd2bddf6c749677ef2 upstream.

Some error paths in mtd_blkdevs were fixed in the following commit:

    commit 94735ec4044a6d318b83ad3c5794e931ed168d10
    mtd: mtd_blkdevs: fix error path in blktrans_open

But on these error paths, the block device's `dev->open' count is
already incremented before we check for errors. This meant that, while
the error path was handled correctly on the first time through
blktrans_open(), the device is erroneously considered already open on
the second time through.

This problem can be seen, for instance, when a UBI volume is
simultaneously mounted as a UBIFS partition and read through its
corresponding gluebi mtdblockX device. This results in blktrans_open()
passing its error checks (with `dev->open > 0') without actually having
a handle on the device. Here's a summarized log of the actions and
results with nandsim:

    # modprobe nandsim
    # modprobe mtdblock
    # modprobe gluebi
    # modprobe ubifs
    # ubiattach /dev/ubi_ctrl -m 0
    ...
    # ubimkvol /dev/ubi0 -N test -s 16MiB
    ...
    # mount -t ubifs ubi0:test /mnt
    # ls /dev/mtdblock*
    /dev/mtdblock0  /dev/mtdblock1
    # cat /dev/mtdblock1 > /dev/null
    cat: can't open '/dev/mtdblock4': Device or resource busy
    # cat /dev/mtdblock1 > /dev/null

    CPU 0 Unable to handle kernel paging request at virtual address
    fffffff0, epc == 8031536c, ra == 8031f280
    Oops[#1]:
    ...
    Call Trace:
    [<8031536c>] ubi_leb_read+0x14/0x164
    [<8031f280>] gluebi_read+0xf0/0x148
    [<802edba8>] mtdblock_readsect+0x64/0x198
    [<802ecfe4>] mtd_blktrans_thread+0x330/0x3f4
    [<8005be98>] kthread+0x88/0x90
    [<8000bc04>] kernel_thread_helper+0x10/0x18

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agomtd: mtdoops: skip reading initially bad blocks
Roman Tereshonkov [Fri, 2 Dec 2011 13:07:17 +0000]
mtd: mtdoops: skip reading initially bad blocks

commit 3538c56329936c78f7d356889908790006d0124c upstream.

Use block_isbad to check and skip the bad blocks reading.
This will allow to get rid of the read errors if bad blocks
are present initially.

Signed-off-by: Roman Tereshonkov <roman.tereshonkov@nokia.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agomtdoops: fix the oops_page_used array size
Roman Tereshonkov [Tue, 29 Nov 2011 10:49:18 +0000]
mtdoops: fix the oops_page_used array size

commit 556f063580db2953a7e53cd46b47724246320f60 upstream.

The array of unsigned long pointed by oops_page_used is allocated
by vmalloc which requires the size to be in bytes.

BITS_PER_LONG is equal to 32.
If we want to allocate memory for 32 pages with one bit per page then
32 / BITS_PER_LONG  is equal to 1 byte that is 8 bits.
To fix it we need to multiply the result by sizeof(unsigned long) equal to 4.

Signed-off-by: Roman Tereshonkov <roman.tereshonkov@nokia.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agoLinux 3.1.9
Greg Kroah-Hartman [Thu, 12 Jan 2012 19:53:18 +0000]
Linux 3.1.9

8 years agoxfs: fix acl count validation in xfs_acl_from_disk()
Xi Wang [Mon, 12 Dec 2011 21:55:52 +0000]
xfs: fix acl count validation in xfs_acl_from_disk()

commit 093019cf1b18dd31b2c3b77acce4e000e2cbc9ce upstream.

Commit fa8b18ed didn't prevent the integer overflow and possible
memory corruption.  "count" can go negative and bypass the check.

Signed-off-by: Xi Wang <xi.wang@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agoxfs: validate acl count
Christoph Hellwig [Sun, 20 Nov 2011 15:35:32 +0000]
xfs: validate acl count

commit fa8b18edd752a8b4e9d1ee2cd615b82c93cf8bba upstream.

This prevents in-memory corruption and possible panics if the on-disk
ACL is badly corrupted.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agousb: cdc-acm: Fix acm_tty_hangup() vs. acm_tty_close() race
Thilo-Alexander Ginkel [Sat, 17 Dec 2011 09:55:10 +0000]
usb: cdc-acm: Fix acm_tty_hangup() vs. acm_tty_close() race

[Not upstream s it was fixed differently there for 3.3 with a much more
"intrusive" rework of the driver - gregkh]

There is a race condition involving acm_tty_hangup() and acm_tty_close()
where hangup() would attempt to access tty->driver_data without proper
locking and NULL checking after close() has potentially already set it
to NULL.  One possibility to (sporadically) trigger this behavior is to
perform a suspend/resume cycle with a running WWAN data connection.

This patch addresses the issue by introducing a NULL check for
tty->driver_data in acm_tty_hangup() protected by open_mutex and exiting
gracefully when hangup() is invoked on a device that has already been
closed.

Signed-off-by: Thilo-Alexander Ginkel <thilo@ginkel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agoSCSI: mpt2sas: Added missing mpt2sas_base_detach call from scsih_remove context
kashyap.desai@lsi.com [Thu, 4 Aug 2011 11:17:50 +0000]
SCSI: mpt2sas: Added missing mpt2sas_base_detach call from scsih_remove context

commit 9ae89b0296e275d5a556068b40b7c2557a556a85 upstream.

mpt2sas_base_detach() call was removed from _scsih_remove() while
doing some code shuffling.  Mainly when we work on adding code for
scsih_shutdown().  I have added back mpt2sas_base_detach() which will
get callled from _scsih_remove().

Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

8 years agoPM / Sleep: Fix race between CPU hotplug and freezer
Srivatsa S. Bhat [Wed, 2 Nov 2011 23:59:25 +0000]
PM / Sleep: Fix race between CPU hotplug and freezer

commit 79cfbdfa87e84992d509e6c1648a18e1d7e68c20 upstream.

The CPU hotplug notifications sent out by the _cpu_up() and _cpu_down()
functions depend on the value of the 'tasks_frozen' argument passed to them
(which indicates whether tasks have been frozen or not).
(Examples for such CPU hotplug notifications: CPU_ONLINE, CPU_ONLINE_FROZEN,
CPU_DEAD, CPU_DEAD_FROZEN).

Thus, it is essential that while the callbacks for those notifications are
running, the state of the system with respect to the tasks being frozen or
not remains unchanged, *throughout that duration*. Hence there is a need for
synchronizing the CPU hotplug code with the freezer subsystem.

Since the freezer is involved only in the Suspend/Hibernate call paths, this
patch hooks the CPU hotplug code to the suspend/hibernate notifiers
PM_[SUSPEND|HIBERNATE]_PREPARE and PM_POST_[SUSPEND|HIBERNATE] to prevent
the race between CPU hotplug and freezer, thus ensuring that CPU hotplug
notifications will always be run with the state of the system really being
what the notifications indicate, _throughout_ their execution time.

Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agobonding: fix error handling if slave is busy (v2)
stephen hemminger [Sat, 31 Dec 2011 13:26:46 +0000]
bonding: fix error handling if slave is busy (v2)

commit f7d9821a6a9c83450ac35e76d3709e32fd38b76f upstream.

If slave device already has a receive handler registered, then the
error unwind of bonding device enslave function is broken.

The following will leave a pointer to freed memory in the slave
device list, causing a later kernel panic.
# modprobe dummy
# ip li add dummy0-1 link dummy0 type macvlan
# modprobe bonding
# echo +dummy0 >/sys/class/net/bond0/bonding/slaves

The fix is to detach the slave (which removes it from the list)
in the unwind path.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Reviewed-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agoasix: fix infinite loop in rx_fixup()
Aurelien Jacobs [Sat, 7 Jan 2012 20:15:16 +0000]
asix: fix infinite loop in rx_fixup()

commit 6c15d74defd38e7e7f8805392578b7a1d508097e upstream.

At this point if skb->len happens to be 2, the subsequant skb_pull(skb, 4)
call won't work and the skb->len won't be decreased and won't ever reach 0,
resulting in an infinite loop.

With an ASIX 88772 under heavy load, without this patch, rx_fixup() reaches
an infinite loop in less than a minute. With this patch applied,
no infinite loop even after hours of heavy load.

Signed-off-by: Aurelien Jacobs <aurel@gnuage.org>
Cc: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoigmp: Avoid zero delay when receiving odd mixture of IGMP queries
Ben Hutchings [Mon, 9 Jan 2012 22:06:46 +0000]
igmp: Avoid zero delay when receiving odd mixture of IGMP queries

commit a8c1f65c79cbbb2f7da782d4c9d15639a9b94b27 upstream.

Commit 5b7c84066733c5dfb0e4016d939757b38de189e4 ('ipv4: correct IGMP
behavior on v3 query during v2-compatibility mode') added yet another
case for query parsing, which can result in max_delay = 0.  Substitute
a value of 1, as in the usual v3 case.

Reported-by: Simon McVittie <smcv@debian.org>
References: http://bugs.debian.org/654876
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoOHCI: final fix for NVIDIA problems (I hope)
Alan Stern [Thu, 17 Nov 2011 21:41:45 +0000]
OHCI: final fix for NVIDIA problems (I hope)

commit c61875977458637226ab093a35d200f2d5789787 upstream.

Problems with NVIDIA's OHCI host controllers persist.  After looking
carefully through the spec, I finally realized that when a controller
is reset it then automatically goes into a SUSPEND state in which it
is completely quiescent (no DMA and no IRQs) and from which it will
not awaken until the system puts it into the OPERATIONAL state.

Therefore there's no need to worry about controllers being in the
RESET state for extended periods, or remaining in the OPERATIONAL
state during system shutdown.  The proper action for device
initialization is to put the controller into the RESET state (if it's
not there already) and then to issue a software reset.  Similarly, the
proper action for device shutdown is simply to do a software reset.

This patch (as1499) implements such an approach.  It simplifies
initialization and shutdown, and allows the NVIDIA shutdown-quirk code
to be removed.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Andre "Osku" Schmidt <andre.osku.schmidt@googlemail.com>
Tested-by: Arno Augustin <Arno.Augustin@web.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agousb: ch9: fix up MaxStreams helper
Felipe Balbi [Mon, 2 Jan 2012 11:35:41 +0000]
usb: ch9: fix up MaxStreams helper

commit 18b7ede5f7ee2092aedcb578d3ac30bd5d4fc23c upstream.

[ removed the dwc3 portion of the patch as it didn't apply to
older kernels - gregkh]

According to USB 3.0 Specification Table 9-22, if
bmAttributes [4:0] are set to zero, it means "no
streams supported", but the way this helper was
defined on Linux, we will *always* have one stream
which might cause several problems.

For example on DWC3, we would tell the controller
endpoint has streams enabled and yet start transfers
with Stream ID set to 0, which would goof up the host
side.

While doing that, convert the macro to an inline
function due to the different checks we now need.

Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agousb: option: add ZD Incorporated HSPA modem
Janne Snabb [Wed, 28 Dec 2011 19:36:00 +0000]
usb: option: add ZD Incorporated HSPA modem

commit 3c8c9316710b83e906e425024153bf0929887b59 upstream.

Add support for Chinese Noname HSPA USB modem which is apparently
manufactured by a company called ZD Incorporated (based on texts in the
Windows drivers).

This product is available at least from Dealextreme (SKU 80032) and
possibly in India with name Olive V-MW250. It is based on Qualcomm
MSM6280 chip.

I needed to also add "options usb-storage quirks=0685:7000:i" in modprobe
configuration because udevd or the kernel keeps poking the embedded
fake-cd-rom which fails and causes the device to reset. There might be
a better way to accomplish the same. usb_modeswitch is not needed with
this device.

Signed-off-by: Janne Snabb <snabb@epipe.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agoUSB: option: add id for 3G dongle Model VT1000 of Viettel
VU Tuan Duc [Tue, 15 Nov 2011 07:08:00 +0000]
USB: option: add id for 3G dongle Model VT1000 of Viettel

commit 5b061623355d8f69327a24838b0aa05e435ae5d5 upstream.

Add VendorID/ProductID for USB 3G dongle Model VT1000 of Viettel.

Signed-off-by: VU Tuan Duc <ducvt@viettel.com.vn>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agoxhci: Properly handle COMP_2ND_BW_ERR
Hans de Goede [Wed, 4 Jan 2012 22:29:18 +0000]
xhci: Properly handle COMP_2ND_BW_ERR

commit 71d85724bdd947a3b42a88d08af79f290a1a767b upstream.

I encountered a result of COMP_2ND_BW_ERR while improving how the pwc
webcam driver handles not having the full usb1 bandwidth available to
itself.

I created the following test setup, a NEC xhci controller with a
single TT USB 2 hub plugged into it, with a usb keyboard and a pwc webcam
plugged into the usb2 hub. This caused the following to show up in dmesg
when trying to stream from the pwc camera at its highest alt setting:

xhci_hcd 0000:01:00.0: ERROR: unexpected command completion code 0x23.
usb 6-2.1: Not enough bandwidth for altsetting 9

And usb_set_interface returned -EINVAL, which caused my pwc code to not
do the right thing as it expected -ENOSPC.

This patch makes the xhci driver properly handle COMP_2ND_BW_ERR and makes
usb_set_interface return -ENOSPC as expected.

This should be backported to stable kernels as old as 2.6.32.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agousb: fix number of mapped SG DMA entries
Clemens Ladisch [Sat, 3 Dec 2011 22:41:31 +0000]
usb: fix number of mapped SG DMA entries

commit bc677d5b64644c399cd3db6a905453e611f402ab upstream.

Add a new field num_mapped_sgs to struct urb so that we have a place to
store the number of mapped entries and can also retain the original
value of entries in num_sgs.  Previously, usb_hcd_map_urb_for_dma()
would overwrite this with the number of mapped entries, which would
break dma_unmap_sg() because it requires the original number of entries.

This fixes warnings like the following when using USB storage devices:
 ------------[ cut here ]------------
 WARNING: at lib/dma-debug.c:902 check_unmap+0x4e4/0x695()
 ehci_hcd 0000:00:12.2: DMA-API: device driver frees DMA sg list with different entry count [map count=4] [unmap count=1]
 Modules linked in: ohci_hcd ehci_hcd
 Pid: 0, comm: kworker/0:1 Not tainted 3.2.0-rc2+ #319
 Call Trace:
  <IRQ>  [<ffffffff81036d3b>] warn_slowpath_common+0x80/0x98
  [<ffffffff81036de7>] warn_slowpath_fmt+0x41/0x43
  [<ffffffff811fa5ae>] check_unmap+0x4e4/0x695
  [<ffffffff8105e92c>] ? trace_hardirqs_off+0xd/0xf
  [<ffffffff8147208b>] ? _raw_spin_unlock_irqrestore+0x33/0x50
  [<ffffffff811fa84a>] debug_dma_unmap_sg+0xeb/0x117
  [<ffffffff8137b02f>] usb_hcd_unmap_urb_for_dma+0x71/0x188
  [<ffffffff8137b166>] unmap_urb_for_dma+0x20/0x22
  [<ffffffff8137b1c5>] usb_hcd_giveback_urb+0x5d/0xc0
  [<ffffffffa0000d02>] ehci_urb_done+0xf7/0x10c [ehci_hcd]
  [<ffffffffa0001140>] qh_completions+0x429/0x4bd [ehci_hcd]
  [<ffffffffa000340a>] ehci_work+0x95/0x9c0 [ehci_hcd]
  ...
 ---[ end trace f29ac88a5a48c580 ]---
 Mapped at:
  [<ffffffff811faac4>] debug_dma_map_sg+0x45/0x139
  [<ffffffff8137bc0b>] usb_hcd_map_urb_for_dma+0x22e/0x478
  [<ffffffff8137c494>] usb_hcd_submit_urb+0x63f/0x6fa
  [<ffffffff8137d01c>] usb_submit_urb+0x2c7/0x2de
  [<ffffffff8137dcd4>] usb_sg_wait+0x55/0x161

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agoUSB: Add USB-ID for Multiplex RC serial adapter to cp210x.c
Malte Schröder [Thu, 5 Jan 2012 19:34:40 +0000]
USB: Add USB-ID for Multiplex RC serial adapter to cp210x.c

commit 08e87d0d773dc9ca5faf4c3306e238ed0ea129b0 upstream.

Hi, below patch adds the USB-ID of the serial adapters sold by
Multiplex RC (www.multiplex-rc.de).

Signed-off-by: Malte Schröder <maltesch@gmx.de>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agoUSB: omninet: fix write_room
Johan Hovold [Sun, 6 Nov 2011 18:06:21 +0000]
USB: omninet: fix write_room

commit 694c6301e515bad574af74b6552134c4d9dcb334 upstream.

Fix regression introduced by commit 507ca9bc047666 ([PATCH] USB: add
ability for usb-serial drivers to determine if their write urb is
currently being used.) which inverted the logic in write_room so that it
returns zero when the write urb is actually free.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agousb: musb: fix pm_runtime mismatch
Felipe Contreras [Mon, 19 Dec 2011 20:01:54 +0000]
usb: musb: fix pm_runtime mismatch

commit 772aed45b604c5ff171f0f12c12392d868333f79 upstream.

In musb_init_controller() there's a pm_runtime_put(), but there's no
pm_runtime_get(), which creates a mismatch that causes the driver to
sleep when it shouldn't.

This was introduced in 7acc619[1], but it wasn't triggered in my setup
until 18a2689[2] was merged to Linus' branch at point df0914[3]. IOW;
when PM is working as it was supposed to.

However, it seems most of the time this is used in a way that keeps the
counter above 0, so nobody noticed. Also, it seems to depend on the
configuration used in versions before 3.1, but not later (or in it).

I found the problem by loading isp1704_charger before any usb gadgets:
http://article.gmane.org/gmane.linux.kernel/1226122

All versions after 2.6.39 are affected.

[1] usb: musb: Idle path retention and offmode support for OMAP3
[2] OMAP2+: musb: hwmod adaptation for musb registration
[3] Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

Cc: Hema HK <hemahk@ti.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

8 years agoUSB: add quirk for another camera
Oliver Neukum [Tue, 3 Jan 2012 08:58:54 +0000]
USB: add quirk for another camera

commit 35284b3d2f68a8a3703745e629999469f78386b5 upstream.

The Guillemot Webcam Hercules Dualpix Exchange camera
has been reported with a second ID.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agousb: usb-storage doesn't support dynamic id currently, the patch disables the feature...
Huajun Li [Wed, 4 Jan 2012 11:25:33 +0000]
usb: usb-storage doesn't support dynamic id currently, the patch disables the feature to fix an oops

commit 1a3a026ba1b6bbfe0b7f79ab38cf991d691e7c9a upstream.

Echo vendor and product number of a non usb-storage device to
usb-storage driver's new_id, then plug in the device to host and you
will find following oops msg, the root cause is usb_stor_probe1()
refers invalid id entry if giving a dynamic id, so just disable the
feature.

[ 3105.018012] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC
[ 3105.018062] CPU 0
[ 3105.018075] Modules linked in: usb_storage usb_libusual bluetooth
dm_crypt binfmt_misc snd_hda_codec_analog snd_hda_intel snd_hda_codec
snd_hwdep hp_wmi ppdev sparse_keymap snd_pcm snd_seq_midi snd_rawmidi
snd_seq_midi_event snd_seq snd_timer snd_seq_device psmouse snd
serio_raw tpm_infineon soundcore i915 snd_page_alloc tpm_tis
parport_pc tpm tpm_bios drm_kms_helper drm i2c_algo_bit video lp
parport usbhid hid sg sr_mod sd_mod ehci_hcd uhci_hcd usbcore e1000e
usb_common floppy
[ 3105.018408]
[ 3105.018419] Pid: 189, comm: khubd Tainted: G          I  3.2.0-rc7+
#29 Hewlett-Packard HP Compaq dc7800p Convertible Minitower/0AACh
[ 3105.018481] RIP: 0010:[<ffffffffa045830d>]  [<ffffffffa045830d>]
usb_stor_probe1+0x2fd/0xc20 [usb_storage]
[ 3105.018536] RSP: 0018:ffff880056a3d830  EFLAGS: 00010286
[ 3105.018562] RAX: ffff880065f4e648 RBX: ffff88006bb28000 RCX: 0000000000000000
[ 3105.018597] RDX: ffff88006f23c7b0 RSI: 0000000000000001 RDI: 0000000000000206
[ 3105.018632] RBP: ffff880056a3d900 R08: 0000000000000000 R09: ffff880067365000
[ 3105.018665] R10: 00000000000002ac R11: 0000000000000010 R12: ffff6000b41a7340
[ 3105.018698] R13: ffff880065f4ef60 R14: ffff88006bb28b88 R15: ffff88006f23d270
[ 3105.018733] FS:  0000000000000000(0000) GS:ffff88007a200000(0000)
knlGS:0000000000000000
[ 3105.018773] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 3105.018801] CR2: 00007fc99c8c4650 CR3: 0000000001e05000 CR4: 00000000000006f0
[ 3105.018835] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 3105.018870] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 3105.018906] Process khubd (pid: 189, threadinfo ffff880056a3c000,
task ffff88005677a400)
[ 3105.018945] Stack:
[ 3105.018959]  0000000000000000 0000000000000000 ffff880056a3d8d0
0000000000000002
[ 3105.019011]  0000000000000000 ffff880056a3d918 ffff880000000000
0000000000000002
[ 3105.019058]  ffff880056a3d8d0 0000000000000012 ffff880056a3d8d0
0000000000000006
[ 3105.019105] Call Trace:
[ 3105.019128]  [<ffffffffa0458cd4>] storage_probe+0xa4/0xe0 [usb_storage]
[ 3105.019173]  [<ffffffffa0097822>] usb_probe_interface+0x172/0x330 [usbcore]
[ 3105.019211]  [<ffffffff815fda67>] driver_probe_device+0x257/0x3b0
[ 3105.019243]  [<ffffffff815fdd43>] __device_attach+0x73/0x90
[ 3105.019272]  [<ffffffff815fdcd0>] ? __driver_attach+0x110/0x110
[ 3105.019303]  [<ffffffff815fb93c>] bus_for_each_drv+0x9c/0xf0
[ 3105.019334]  [<ffffffff815fd6c7>] device_attach+0xf7/0x120
[ 3105.019364]  [<ffffffff815fc905>] bus_probe_device+0x45/0x80
[ 3105.019396]  [<ffffffff815f98a6>] device_add+0x876/0x990
[ 3105.019434]  [<ffffffffa0094e42>] usb_set_configuration+0x822/0x9e0 [usbcore]
[ 3105.019479]  [<ffffffffa00a3492>] generic_probe+0x62/0xf0 [usbcore]
[ 3105.019518]  [<ffffffffa0097a46>] usb_probe_device+0x66/0xb0 [usbcore]
[ 3105.019555]  [<ffffffff815fda67>] driver_probe_device+0x257/0x3b0
[ 3105.019589]  [<ffffffff815fdd43>] __device_attach+0x73/0x90
[ 3105.019617]  [<ffffffff815fdcd0>] ? __driver_attach+0x110/0x110
[ 3105.019648]  [<ffffffff815fb93c>] bus_for_each_drv+0x9c/0xf0
[ 3105.019680]  [<ffffffff815fd6c7>] device_attach+0xf7/0x120
[ 3105.019709]  [<ffffffff815fc905>] bus_probe_device+0x45/0x80
[ 3105.021040] usb usb6: usb auto-resume
[ 3105.021045] usb usb6: wakeup_rh
[ 3105.024849]  [<ffffffff815f98a6>] device_add+0x876/0x990
[ 3105.025086]  [<ffffffffa0088987>] usb_new_device+0x1e7/0x2b0 [usbcore]
[ 3105.025086]  [<ffffffffa008a4d7>] hub_thread+0xb27/0x1ec0 [usbcore]
[ 3105.025086]  [<ffffffff810d5200>] ? wake_up_bit+0x50/0x50
[ 3105.025086]  [<ffffffffa00899b0>] ? usb_remote_wakeup+0xa0/0xa0 [usbcore]
[ 3105.025086]  [<ffffffff810d49b8>] kthread+0xd8/0xf0
[ 3105.025086]  [<ffffffff81939884>] kernel_thread_helper+0x4/0x10
[ 3105.025086]  [<ffffffff8192a8c0>] ? _raw_spin_unlock_irq+0x50/0x80
[ 3105.025086]  [<ffffffff8192b1b4>] ? retint_restore_args+0x13/0x13
[ 3105.025086]  [<ffffffff810d48e0>] ? __init_kthread_worker+0x80/0x80
[ 3105.025086]  [<ffffffff81939880>] ? gs_change+0x13/0x13
[ 3105.025086] Code: 00 48 83 05 cd ad 00 00 01 48 83 05 cd ad 00 00
01 4c 8b ab 30 0c 00 00 48 8b 50 08 48 83 c0 30 48 89 45 a0 4c 89 a3
40 0c 00 00 <41> 0f b6 44 24 10 48 89 55 a8 3c ff 0f 84 b8 04 00 00 48
83 05
[ 3105.025086] RIP  [<ffffffffa045830d>] usb_stor_probe1+0x2fd/0xc20
[usb_storage]
[ 3105.025086]  RSP <ffff880056a3d830>
[ 3105.060037] hub 6-0:1.0: hub_resume
[ 3105.062616] usb usb5: usb auto-resume
[ 3105.064317] ehci_hcd 0000:00:1d.7: resume root hub
[ 3105.094809] ---[ end trace a7919e7f17c0a727 ]---
[ 3105.130069] hub 5-0:1.0: hub_resume
[ 3105.132131] usb usb4: usb auto-resume
[ 3105.132136] usb usb4: wakeup_rh
[ 3105.180059] hub 4-0:1.0: hub_resume
[ 3106.290052] usb usb6: suspend_rh (auto-stop)
[ 3106.290077] usb usb4: suspend_rh (auto-stop)

Signed-off-by: Huajun Li <huajun.li.lee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agoUSB: isight: fix kernel bug when loading firmware
Greg Kroah-Hartman [Mon, 5 Dec 2011 22:02:59 +0000]
USB: isight: fix kernel bug when loading firmware

commit 59bf5cf94f0fa3b08fb1258b52649077b7d0914d upstream.

We were sending data on the stack when uploading firmware, which causes
some machines fits, and is not allowed.  Fix this by using the buffer we
already had around for this very purpose.

Reported-by: Wouter M. Koolen <wmkoolen@cwi.nl>
Tested-by: Wouter M. Koolen <wmkoolen@cwi.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agodrivers/usb/class/cdc-acm.c: clear dangling pointer
Julia Lawall [Fri, 23 Dec 2011 13:02:55 +0000]
drivers/usb/class/cdc-acm.c: clear dangling pointer

commit e7c8e8605d0bafc705ff27f9da98a1668427cc0f upstream.

On some failures, the country_code field of an acm structure is freed
without freeing the acm structure itself.  Elsewhere, operations including
memcpy and kfree are performed on the country_code field.  The patch sets
the country_code field to NULL when it is freed, and likewise sets the
country_code_size field to 0.

Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agoudf: Fix deadlock when converting file from in-ICB one to normal one
Jan Kara [Sat, 10 Dec 2011 01:30:48 +0000]
udf: Fix deadlock when converting file from in-ICB one to normal one

commit d2eb8c359309ec45d6bf5b147303ab8e13be86ea upstream.

During BKL removal in 2.6.38, conversion of files from in-ICB format to normal
format got broken. We call ->writepage with i_data_sem held but udf_get_block()
also acquires i_data_sem thus creating A-A deadlock.

We fix the problem by dropping i_data_sem before calling ->writepage() which is
safe since i_mutex still protects us against any changes in the file. Also fix
pagelock - i_data_sem lock inversion in udf_expand_file_adinicb() by dropping
i_data_sem before calling find_or_create_page().

Reported-by: Matthias Matiak <netzpython@mail-on.us>
Tested-by: Matthias Matiak <netzpython@mail-on.us>
Reviewed-by: Namjae Jeon <linkinjeon@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agocgroup: fix to allow mounting a hierarchy by name
Li Zefan [Tue, 27 Dec 2011 06:25:55 +0000]
cgroup: fix to allow mounting a hierarchy by name

commit 0d19ea866562e46989412a0676412fa0983c9ce7 upstream.

If we mount a hierarchy with a specified name, the name is unique,
and we can use it to mount the hierarchy without specifying its
set of subsystem names. This feature is documented is
Documentation/cgroups/cgroups.txt section 2.3

Here's an example:

# mount -t cgroup -o cpuset,name=myhier xxx /cgroup1
# mount -t cgroup -o name=myhier xxx /cgroup2

But it was broken by commit 32a8cf235e2f192eb002755076994525cdbaa35a
(cgroup: make the mount options parsing more accurate)

This fixes the regression.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agoatmel_serial: fix spinlock lockup in RS485 code
Claudio Scordino [Fri, 16 Dec 2011 14:08:49 +0000]
atmel_serial: fix spinlock lockup in RS485 code

commit dbf1115d3f8c7052788aa4e6e46abd27f3b3eeba upstream.

Patch to fix a spinlock lockup in the driver that sometimes happens when the
tasklet starts.

Signed-off-by: Claudio Scordino <claudio@evidence.eu.com>
Signed-off-by: Dave Bender <codehero@gmail.com>
Tested-by: Dave Bender <codehero@gmail.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agoUSB: update documentation for usbmon
Alan Stern [Wed, 4 Jan 2012 21:36:35 +0000]
USB: update documentation for usbmon

commit d8cae98cddd286e38db1724dda1b0e7b467f9237 upstream.

The documentation for usbmon is out of date; the usbfs "devices" file
now exists in /sys/kernel/debug/usb rather than /proc/bus/usb.  This
patch (as1505) updates the documentation accordingly, and also
mentions that the necessary information can be found by running lsusb.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agoext3: Don't warn from writepage when readonly inode is spotted after error
Jan Kara [Thu, 22 Dec 2011 15:49:05 +0000]
ext3: Don't warn from writepage when readonly inode is spotted after error

commit 33c104d415e92a51aaf638dc3d93920cfa601e5c upstream.

WARN_ON_ONCE(IS_RDONLY(inode)) tends to trip when filesystem hits error and is
remounted read-only. This unnecessarily scares users (well, they should be
scared because of filesystem error, but the stack trace distracts them from the
right source of their fear ;-). We could as well just remove the WARN_ON but
it's not hard to fix it to not trip on filesystem with errors and not use more
cycles in the common case so that's what we do.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agoreiserfs: Force inode evictions before umount to avoid crash
Jeff Mahoney [Wed, 21 Dec 2011 20:18:43 +0000]
reiserfs: Force inode evictions before umount to avoid crash

commit a9e36da655e54545c3289b2a0700b5c443de0edd upstream.

This patch fixes a crash in reiserfs_delete_xattrs during umount.

When shrink_dcache_for_umount clears the dcache from
generic_shutdown_super, delayed evictions are forced to disk. If an
evicted inode has extended attributes associated with it, it will
need to walk the xattr tree to locate and remove them.

But since shrink_dcache_for_umount will BUG if it encounters active
dentries, the xattr tree must be released before it's called or it will
crash during every umount.

This patch forces the evictions to occur before generic_shutdown_super
by calling shrink_dcache_sb first. The additional evictions caused
by the removal of each associated xattr file and dir will be automatically
handled as they're added to the LRU list.

CC: reiserfs-devel@vger.kernel.org
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agoreiserfs: Fix quota mount option parsing
Jan Kara [Wed, 21 Dec 2011 16:35:34 +0000]
reiserfs: Fix quota mount option parsing

commit a06d789b424190e9f59da391681f908486db2554 upstream.

When jqfmt mount option is not specified on remount, we mistakenly clear
s_jquota_fmt value stored in superblock. Fix the problem.

CC: reiserfs-devel@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agoperf: Fix parsing of __print_flags() in TP_printk()
Steven Rostedt [Fri, 4 Nov 2011 20:32:25 +0000]
perf: Fix parsing of __print_flags() in TP_printk()

commit 49908a1b25d448d68fd26faca260e1850201575f upstream.

A update is made to the sched:sched_switch event that adds some
logic to the first parameter of the __print_flags() that shows the
state of tasks. This change cause perf to fail parsing the flags.

A simple fix is needed to have the parser be able to process ops
within the argument.

Reported-by: Andrew Vagin <avagin@openvz.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agoIB/qib: Fix a possible data corruption when receiving packets
Ram Vepa [Fri, 23 Dec 2011 13:01:43 +0000]
IB/qib: Fix a possible data corruption when receiving packets

commit eddfb675256f49d14e8c5763098afe3eb2c93701 upstream.

Prevent a receive data corruption by ensuring that the write to update
the rcvhdrheadn register to generate an interrupt is at the very end
of the receive processing.

Signed-off-by: Ramkrishna Vepa <ram.vepa@qlogic.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agoasix: new device id
Aurelien Jacobs [Fri, 16 Dec 2011 10:49:22 +0000]
asix: new device id

commit e8303a3b2196272c3eb994d0fd1a189a958a2bdd upstream.

Adds the device id needed for the USB Ethernet Adapter delivered by
ASUS with their Zenbook.

Signed-off-by: Aurelien Jacobs <aurel@gnuage.org>
Acked-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agopowerpc: Fix unpaired probe_hcall_entry and probe_hcall_exit
Li Zhong [Sun, 18 Dec 2011 16:03:04 +0000]
powerpc: Fix unpaired probe_hcall_entry and probe_hcall_exit

commit e4f387d8db3ba3c2dae4d8bdfe7bb5f4fe1bcb0d upstream.

Unpaired calling of probe_hcall_entry and probe_hcall_exit might happen
as following, which could cause incorrect preempt count.

__trace_hcall_entry => trace_hcall_entry -> probe_hcall_entry =>
get_cpu_var => preempt_disable

__trace_hcall_exit => trace_hcall_exit -> probe_hcall_exit =>
put_cpu_var => preempt_enable

where:
A => B and A -> B means A calls B, but
=> means A will call B through function name, and B will definitely be
called.
-> means A will call B through function pointer, so B might not be
called if the function pointer is not set.

So error happens when only one of probe_hcall_entry and probe_hcall_exit
get called during a hcall.

This patch tries to move the preempt count operations from
probe_hcall_entry and probe_hcall_exit to its callers.

Reported-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com>
Tested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agopowerpc/time: Handle wrapping of decrementer
Anton Blanchard [Wed, 23 Nov 2011 20:07:17 +0000]
powerpc/time: Handle wrapping of decrementer

commit 37fb9a0231ee43d42d069863bdfd567fca2b61af upstream.

When re-enabling interrupts we have code to handle edge sensitive
decrementers by resetting the decrementer to 1 whenever it is negative.
If interrupts were disabled long enough that the decrementer wrapped to
positive we do nothing. This means interrupts can be delayed for a long
time until it finally goes negative again.

While we hope interrupts are never be disabled long enough for the
decrementer to go positive, we have a very good test team that can
drive any kernel into the ground. The softlockup data we get back
from these fails could be seconds in the future, completely missing
the cause of the lockup.

We already keep track of the timebase of the next event so use that
to work out if we should trigger a decrementer exception.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agowl12xx: Restore testmode ABI
Pontus Fuchs [Thu, 1 Dec 2011 11:13:44 +0000]
wl12xx: Restore testmode ABI

commit 3f1764945eaac532c20ab1f23afa352a40f797b2 upstream.

Commit 80900d0140a7648587982c8f299830e900e49165 accidently broke
the ABI for testmode commands. Restore the ABI again.

Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agowl12xx: Check buffer bound when processing nvs data
Pontus Fuchs [Tue, 18 Oct 2011 07:23:42 +0000]
wl12xx: Check buffer bound when processing nvs data

commit f6efe96edd9c41c624c8f4ddbc4930c1a2d8f1e1 upstream.

An nvs with malformed contents could cause the processing of the
calibration data to read beyond the end of the buffer. Prevent this
from happening by adding bound checking.

Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com>
Reviewed-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agowl12xx: Validate FEM index from ini file and FW
Pontus Fuchs [Tue, 18 Oct 2011 07:23:41 +0000]
wl12xx: Validate FEM index from ini file and FW

commit 2131d3c2f99b081806fdae7662c92fe6acda52af upstream.

Check for out of bound FEM index to prevent reading beyond ini
memory end.

Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com>
Reviewed-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agooffb: Fix bug in calculating requested vram size
Benjamin Herrenschmidt [Tue, 3 Jan 2012 01:09:15 +0000]
offb: Fix bug in calculating requested vram size

commit c055fe0797b7bd8f6f21a13598a55a16d5c13ae7 upstream.

We used to try to request 8 times more vram than needed, which would
fail if the card has a too small BAR (observed with qemu & kvm).

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agooffb: Fix setting of the pseudo-palette for >8bpp
Benjamin Herrenschmidt [Wed, 28 Dec 2011 00:10:16 +0000]
offb: Fix setting of the pseudo-palette for >8bpp

commit 1bb0b7d21584b3f878e2bc880db62351ddee5185 upstream.

When using a >8bpp framebuffer, offb advertises truecolor, not directcolor,
and doesn't touch the color map even if it has a corresponding access method
for the real hardware.

Thus it needs to set the pseudo-palette with all 3 components of the color,
like other truecolor framebuffers, not with copies of the color index like
a directcolor framebuffer would do.

This went unnoticed for a long time because it's pretty hard to get offb
to kick in with anything but 8bpp (old BootX under MacOS will do that and
qemu does it).

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agort2800usb: Move ID out of unknown
Larry Finger [Tue, 27 Dec 2011 18:22:51 +0000]
rt2800usb: Move ID out of unknown

commit 3f81f8f1524ccca24df1029b0cf825ecef5e5cdc upstream.

Testing on the openSUSE wireless forum has shown that a Linksys
WUSB54GC v3 with USB ID 1737:0077 works with rt2800usb when the ID is
written to /sys/.../new_id. This ID can therefore be moved out of UNKNOWN.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agofirmware: Fix an oops on reading fw_priv->fw in sysfs loading file
Neil Horman [Mon, 2 Jan 2012 20:31:23 +0000]
firmware: Fix an oops on reading fw_priv->fw in sysfs loading file

commit eea915bb0d1358755f151eaefb8208a2d5f3e10c upstream.

This oops was reported recently:
firmware_loading_store+0xf9/0x17b
dev_attr_store+0x20/0x22
sysfs_write_file+0x101/0x134
vfs_write+0xac/0xf3
sys_write+0x4a/0x6e
system_call_fastpath+0x16/0x1b

The complete backtrace was unfortunately not captured, but details can be found
here:
https://bugzilla.redhat.com/show_bug.cgi?id=769920

The cause is fairly clear.

Its caused by the fact that firmware_loading_store has a case 0 in its
switch statement that reads and writes the fw_priv->fw poniter without the
protection of the fw_lock mutex.  since there is a window between the time that
_request_firmware sets fw_priv->fw to NULL and the time the corresponding sysfs
file is unregistered, its possible for a user space application to race in, and
write a zero to the loading file, causing a NULL dereference in
firmware_loading_store.  Fix it by extending the protection of the fw_lock mutex
to cover all of the firware_loading_store function.

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agoDocumentation: Update stable address
Joe Perches [Fri, 9 Dec 2011 22:12:00 +0000]
Documentation: Update stable address

commit 2eb7f204db51969ea558802a6601d79c2fb273b9 upstream.

The Japanese/Korean/Chinese versions still need updating.

Also, the stable kernel 2.6.x.y descriptions are out of date
and should be updated as well.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agoMAINTAINERS: stable: Update address
Joe Perches [Fri, 9 Dec 2011 21:54:34 +0000]
MAINTAINERS: stable: Update address

commit bc7a2f3abc636d7cab84258a48e77b08fb5fd3d6 upstream.

The old address hasn't worked since the great intrusion of August 2011.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agoLinux 3.1.8
Greg Kroah-Hartman [Fri, 6 Jan 2012 22:19:58 +0000]
Linux 3.1.8

8 years agoath9k: Fix kernel panic in AR2427 in AP mode
Mohammed Shafi Shajakhan [Mon, 26 Dec 2011 05:12:15 +0000]
ath9k: Fix kernel panic in AR2427 in AP mode

commit b25bfda38236f349cde0d1b28952f4eea2148d3f upstream.

don't do aggregation related stuff for 'AP mode client power save
handling' if aggregation is not enabled in the driver, otherwise it
will lead to panic because those data structures won't be never
intialized in 'ath_tx_node_init' if aggregation is disabled

EIP is at ath_tx_aggr_wakeup+0x37/0x80 [ath9k]
EAX: e8c09a20 EBX: f2a304e8 ECX: 00000001 EDX: 00000000
ESI: e8c085e0 EDI: f2a304ac EBP: f40e1ca4 ESP: f40e1c8c
DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
Process swapper/1 (pid: 0, ti=f40e0000 task=f408e860
task.ti=f40dc000)
Stack:
0001e966 e8c09a20 00000000 f2a304ac e8c085e0 f2a304ac
f40e1cb0 f8186741
f8186700 f40e1d2c f922988d f2a304ac 00000202 00000001
c0b4ba43 00000000
0000000f e8eb75c0 e8c085e0 205b0001 34383220 f2a304ac
f2a30000 00010020
Call Trace:
[<f8186741>] ath9k_sta_notify+0x41/0x50 [ath9k]
[<f8186700>] ? ath9k_get_survey+0x110/0x110 [ath9k]
[<f922988d>] ieee80211_sta_ps_deliver_wakeup+0x9d/0x350
[mac80211]
[<c018dc75>] ? __module_address+0x95/0xb0
[<f92465b3>] ap_sta_ps_end+0x63/0xa0 [mac80211]
[<f9246746>] ieee80211_rx_h_sta_process+0x156/0x2b0
[mac80211]
[<f9247d1e>] ieee80211_rx_handlers+0xce/0x510 [mac80211]
[<c018440b>] ? trace_hardirqs_on+0xb/0x10
[<c056936e>] ? skb_queue_tail+0x3e/0x50
[<f9248271>] ieee80211_prepare_and_rx_handle+0x111/0x750
[mac80211]
[<f9248bf9>] ieee80211_rx+0x349/0xb20 [mac80211]
[<f9248949>] ? ieee80211_rx+0x99/0xb20 [mac80211]
[<f818b0b8>] ath_rx_tasklet+0x818/0x1d00 [ath9k]
[<f8187a75>] ? ath9k_tasklet+0x35/0x1c0 [ath9k]
[<f8187a75>] ? ath9k_tasklet+0x35/0x1c0 [ath9k]
[<f8187b33>] ath9k_tasklet+0xf3/0x1c0 [ath9k]
[<c0151b7e>] tasklet_action+0xbe/0x180

Cc: Senthil Balasubramanian <senthilb@qca.qualcomm.com>
Cc: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Reported-by: Ashwin Mendonca <ashwinloyal@gmail.com>
Tested-by: Ashwin Mendonca <ashwinloyal@gmail.com>
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agoptrace: ensure JOBCTL_STOP_SIGMASK is not zero after detach
Oleg Nesterov [Wed, 4 Jan 2012 16:29:20 +0000]
ptrace: ensure JOBCTL_STOP_SIGMASK is not zero after detach

commit 8a88951b5878dc475dcd841cefc767e36397d14e upstream.

This is the temporary simple fix for 3.2, we need more changes in this
area.

1. do_signal_stop() assumes that the running untraced thread in the
   stopped thread group is not possible. This was our goal but it is
   not yet achieved: a stopped-but-resumed tracee can clone the running
   thread which can initiate another group-stop.

   Remove WARN_ON_ONCE(!current->ptrace).

2. A new thread always starts with ->jobctl = 0. If it is auto-attached
   and this group is stopped, __ptrace_unlink() sets JOBCTL_STOP_PENDING
   but JOBCTL_STOP_SIGMASK part is zero, this triggers WANR_ON(!signr)
   in do_jobctl_trap() if another debugger attaches.

   Change __ptrace_unlink() to set the artificial SIGSTOP for report.

   Alternatively we could change ptrace_init_task() to copy signr from
   current, but this means we can copy it for no reason and hide the
   possible similar problems.

Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agoptrace: partially fix the do_wait(WEXITED) vs EXIT_DEAD->EXIT_ZOMBIE race
Oleg Nesterov [Wed, 4 Jan 2012 16:29:02 +0000]
ptrace: partially fix the do_wait(WEXITED) vs EXIT_DEAD->EXIT_ZOMBIE race

commit 50b8d257486a45cba7b65ca978986ed216bbcc10 upstream.

Test-case:

int main(void)
{
int pid, status;

pid = fork();
if (!pid) {
for (;;) {
if (!fork())
return 0;
if (waitpid(-1, &status, 0) < 0) {
printf("ERR!! wait: %m\n");
return 0;
}
}
}

assert(ptrace(PTRACE_ATTACH, pid, 0,0) == 0);
assert(waitpid(-1, NULL, 0) == pid);

assert(ptrace(PTRACE_SETOPTIONS, pid, 0,
PTRACE_O_TRACEFORK) == 0);

do {
ptrace(PTRACE_CONT, pid, 0, 0);
pid = waitpid(-1, NULL, 0);
} while (pid > 0);

return 1;
}

It fails because ->real_parent sees its child in EXIT_DEAD state
while the tracer is going to change the state back to EXIT_ZOMBIE
in wait_task_zombie().

The offending commit is 823b018e which moved the EXIT_DEAD check,
but in fact we should not blame it. The original code was not
correct as well because it didn't take ptrace_reparented() into
account and because we can't really trust ->ptrace.

This patch adds the additional check to close this particular
race but it doesn't solve the whole problem. We simply can't
rely on ->ptrace in this case, it can be cleared if the tracer
is multithreaded by the exiting ->parent.

I think we should kill EXIT_DEAD altogether, we should always
remove the soon-to-be-reaped child from ->children or at least
we should never do the DEAD->ZOMBIE transition. But this is too
complex for 3.2.

Reported-and-tested-by: Denys Vlasenko <vda.linux@googlemail.com>
Tested-by: Lukasz Michalik <lmi@ift.uni.wroc.pl>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agoRevert "rtc: Disable the alarm in the hardware"
Linus Torvalds [Wed, 4 Jan 2012 01:32:13 +0000]
Revert "rtc: Disable the alarm in the hardware"

commit 157e8bf8b4823bfcdefa6c1548002374b61f61df upstream.

This reverts commit c0afabd3d553c521e003779c127143ffde55a16f.

It causes failures on Toshiba laptops - instead of disabling the alarm,
it actually seems to enable it on the affected laptops, resulting in
(for example) the laptop powering on automatically five minutes after
shutdown.

There's a patch for it that appears to work for at least some people,
but it's too late to play around with this, so revert for now and try
again in the next merge window.

See for example

http://bugs.debian.org/652869

Reported-and-bisected-by: Andreas Friedrich <afrie@gmx.net> (Toshiba Tecra)
Reported-by: Antonio-M. Corbi Bellot <antonio.corbi@ua.es> (Toshiba Portege R500)
Reported-by: Marco Santos <marco.santos@waynext.com> (Toshiba Portege Z830)
Reported-by: Christophe Vu-Brugier <cvubrugier@yahoo.fr>  (Toshiba Portege R830)
Cc: Jonathan Nieder <jrnieder@gmail.com>
Requested-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agohung_task: fix false positive during vfork
Mandeep Singh Baines [Tue, 3 Jan 2012 22:41:13 +0000]
hung_task: fix false positive during vfork

commit f9fab10bbd768b0e5254e53a4a8477a94bfc4b96 upstream.

vfork parent uninterruptibly and unkillably waits for its child to
exec/exit. This wait is of unbounded length. Ignore such waits
in the hung_task detector.

Signed-off-by: Mandeep Singh Baines <msb@chromium.org>
Reported-by: Sasha Levin <levinsasha928@gmail.com>
LKML-Reference: <1325344394.28904.43.camel@lappy>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: John Kacur <jkacur@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agodrm/radeon/kms/atom: fix possible segfault in pm setup
Alexander Müller [Fri, 30 Dec 2011 17:55:48 +0000]
drm/radeon/kms/atom: fix possible segfault in pm setup

commit 4376eee92e5a8332b470040e672ea99cd44c826a upstream.

If we end up with no power states, don't look up
current vddc.

fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=44130

agd5f: fix patch formatting

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agomfd: Turn on the twl4030-madc MADC clock
Kyle Manna [Fri, 12 Aug 2011 03:33:13 +0000]
mfd: Turn on the twl4030-madc MADC clock

commit 3d6271f92e98094584fd1e609a9969cd33e61122 upstream.

Without turning the MADC clock on, no MADC conversions occur.

$ cat /sys/class/hwmon/hwmon0/device/in8_input
[   53.428436] twl4030_madc twl4030_madc: conversion timeout!
cat: read error: Resource temporarily unavailable

Signed-off-by: Kyle Manna <kyle@kylemanna.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agoiwlwifi: update SCD BC table for all SCD queues
Emmanuel Grumbach [Mon, 26 Dec 2011 06:47:34 +0000]
iwlwifi: update SCD BC table for all SCD queues

commit 96f1f05af76b601ab21a7dc603ae0a1cea4efc3d upstream.

Since we configure all the queues as CHAINABLE, we need to update the
byte count for all the queues, not only the AGGREGATABLE ones.

Not doing so can confuse the SCD and make the fw assert.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agoipv4: using prefetch requires including prefetch.h
Stephen Rothwell [Thu, 22 Dec 2011 06:03:29 +0000]
ipv4: using prefetch requires including prefetch.h

[ Upstream commit b9eda06f80b0db61a73bd87c6b0eb67d8aca55ad ]

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: David Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agoipv4: reintroduce route cache garbage collector
Eric Dumazet [Wed, 21 Dec 2011 20:47:16 +0000]
ipv4: reintroduce route cache garbage collector

[ Upstream commit 9f28a2fc0bd77511f649c0a788c7bf9a5fd04edb ]

Commit 2c8cec5c10b (ipv4: Cache learned PMTU information in inetpeer)
removed IP route cache garbage collector a bit too soon, as this gc was
responsible for expired routes cleanup, releasing their neighbour
reference.

As pointed out by Robert Gladewitz, recent kernels can fill and exhaust
their neighbour cache.

Reintroduce the garbage collection, since we'll have to wait our
neighbour lookups become refcount-less to not depend on this stuff.

Reported-by: Robert Gladewitz <gladewitz@gmx.de>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agonet: introduce DST_NOPEER dst flag
Eric Dumazet [Thu, 22 Dec 2011 04:15:53 +0000]
net: introduce DST_NOPEER dst flag

[ Upstream commit e688a604807647c9450f9c12a7cb6d027150a895 ]

Chris Boot reported crashes occurring in ipv6_select_ident().

[  461.457562] RIP: 0010:[<ffffffff812dde61>]  [<ffffffff812dde61>]
ipv6_select_ident+0x31/0xa7

[  461.578229] Call Trace:
[  461.580742] <IRQ>
[  461.582870]  [<ffffffff812efa7f>] ? udp6_ufo_fragment+0x124/0x1a2
[  461.589054]  [<ffffffff812dbfe0>] ? ipv6_gso_segment+0xc0/0x155
[  461.595140]  [<ffffffff812700c6>] ? skb_gso_segment+0x208/0x28b
[  461.601198]  [<ffffffffa03f236b>] ? ipv6_confirm+0x146/0x15e
[nf_conntrack_ipv6]
[  461.608786]  [<ffffffff81291c4d>] ? nf_iterate+0x41/0x77
[  461.614227]  [<ffffffff81271d64>] ? dev_hard_start_xmit+0x357/0x543
[  461.620659]  [<ffffffff81291cf6>] ? nf_hook_slow+0x73/0x111
[  461.626440]  [<ffffffffa0379745>] ? br_parse_ip_options+0x19a/0x19a
[bridge]
[  461.633581]  [<ffffffff812722ff>] ? dev_queue_xmit+0x3af/0x459
[  461.639577]  [<ffffffffa03747d2>] ? br_dev_queue_push_xmit+0x72/0x76
[bridge]
[  461.646887]  [<ffffffffa03791e3>] ? br_nf_post_routing+0x17d/0x18f
[bridge]
[  461.653997]  [<ffffffff81291c4d>] ? nf_iterate+0x41/0x77
[  461.659473]  [<ffffffffa0374760>] ? br_flood+0xfa/0xfa [bridge]
[  461.665485]  [<ffffffff81291cf6>] ? nf_hook_slow+0x73/0x111
[  461.671234]  [<ffffffffa0374760>] ? br_flood+0xfa/0xfa [bridge]
[  461.677299]  [<ffffffffa0379215>] ?
nf_bridge_update_protocol+0x20/0x20 [bridge]
[  461.684891]  [<ffffffffa03bb0e5>] ? nf_ct_zone+0xa/0x17 [nf_conntrack]
[  461.691520]  [<ffffffffa0374760>] ? br_flood+0xfa/0xfa [bridge]
[  461.697572]  [<ffffffffa0374812>] ? NF_HOOK.constprop.8+0x3c/0x56
[bridge]
[  461.704616]  [<ffffffffa0379031>] ?
nf_bridge_push_encap_header+0x1c/0x26 [bridge]
[  461.712329]  [<ffffffffa037929f>] ? br_nf_forward_finish+0x8a/0x95
[bridge]
[  461.719490]  [<ffffffffa037900a>] ?
nf_bridge_pull_encap_header+0x1c/0x27 [bridge]
[  461.727223]  [<ffffffffa0379974>] ? br_nf_forward_ip+0x1c0/0x1d4 [bridge]
[  461.734292]  [<ffffffff81291c4d>] ? nf_iterate+0x41/0x77
[  461.739758]  [<ffffffffa03748cc>] ? __br_deliver+0xa0/0xa0 [bridge]
[  461.746203]  [<ffffffff81291cf6>] ? nf_hook_slow+0x73/0x111
[  461.751950]  [<ffffffffa03748cc>] ? __br_deliver+0xa0/0xa0 [bridge]
[  461.758378]  [<ffffffffa037533a>] ? NF_HOOK.constprop.4+0x56/0x56
[bridge]

This is caused by bridge netfilter special dst_entry (fake_rtable), a
special shared entry, where attaching an inetpeer makes no sense.

Problem is present since commit 87c48fa3b46 (ipv6: make fragment
identifications less predictable)

Introduce DST_NOPEER dst flag and make sure ipv6_select_ident() and
__ip_select_ident() fallback to the 'no peer attached' handling.

Reported-by: Chris Boot <bootc@bootc.net>
Tested-by: Chris Boot <bootc@bootc.net>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agoipv6: Check dest prefix length on original route not copied one in rt6_alloc_cow().
David S. Miller [Tue, 13 Dec 2011 22:35:06 +0000]
ipv6: Check dest prefix length on original route not copied one in rt6_alloc_cow().

[ Upstream commit bb3c36863e8001fc21a88bebfdead4da4c23e848 ]

After commit 8e2ec639173f325977818c45011ee176ef2b11f6 ("ipv6: don't
use inetpeer to store metrics for routes.") the test in rt6_alloc_cow()
for setting the ANYCAST flag is now wrong.

'rt' will always now have a plen of 128, because it is set explicitly
to 128 by ip6_rt_copy.

So to restore the semantics of the test, check the destination prefix
length of 'ort'.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agoipv4: flush route cache after change accept_local
Weiping Pan [Thu, 1 Dec 2011 15:47:06 +0000]
ipv4: flush route cache after change accept_local

[ Upstream commit d01ff0a049f749e0bf10a35bb23edd012718c8c2 ]

After reset ipv4_devconf->data[IPV4_DEVCONF_ACCEPT_LOCAL] to 0,
we should flush route cache, or it will continue receive packets with local
source address, which should be dropped.

Signed-off-by: Weiping Pan <panweiping3@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agonet: Add a flow_cache_flush_deferred function
Steffen Klassert [Wed, 21 Dec 2011 21:48:08 +0000]
net: Add a flow_cache_flush_deferred function

[ Upstream commit c0ed1c14a72ca9ebacd51fb94a8aca488b0d361e ]

flow_cach_flush() might sleep but can be called from
atomic context via the xfrm garbage collector. So add
a flow_cache_flush_deferred() function and use this if
the xfrm garbage colector is invoked from within the
packet path.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Acked-by: Timo Teräs <timo.teras@iki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agosctp: Do not account for sizeof(struct sk_buff) in estimated rwnd
Thomas Graf [Mon, 19 Dec 2011 04:11:40 +0000]
sctp: Do not account for sizeof(struct sk_buff) in estimated rwnd

[ Upstream commit a76c0adf60f6ca5ff3481992e4ea0383776b24d2 ]

When checking whether a DATA chunk fits into the estimated rwnd a
full sizeof(struct sk_buff) is added to the needed chunk size. This
quickly exhausts the available rwnd space and leads to packets being
sent which are much below the PMTU limit. This can lead to much worse
performance.

The reason for this behaviour was to avoid putting too much memory
pressure on the receiver. The concept is not completely irational
because a Linux receiver does in fact clone an skb for each DATA chunk
delivered. However, Linux also reserves half the available socket
buffer space for data structures therefore usage of it is already
accounted for.

When proposing to change this the last time it was noted that this
behaviour was introduced to solve a performance issue caused by rwnd
overusage in combination with small DATA chunks.

Trying to reproduce this I found that with the sk_buff overhead removed,
the performance would improve significantly unless socket buffer limits
are increased.

The following numbers have been gathered using a patched iperf
supporting SCTP over a live 1 Gbit ethernet network. The -l option
was used to limit DATA chunk sizes. The numbers listed are based on
the average of 3 test runs each. Default values have been used for
sk_(r|w)mem.

Chunk
Size    Unpatched     No Overhead
-------------------------------------
   4    15.2 Kbit [!]   12.2 Mbit [!]
   8    35.8 Kbit [!]   26.0 Mbit [!]
  16    95.5 Kbit [!]   54.4 Mbit [!]
  32   106.7 Mbit      102.3 Mbit
  64   189.2 Mbit      188.3 Mbit
 128   331.2 Mbit      334.8 Mbit
 256   537.7 Mbit      536.0 Mbit
 512   766.9 Mbit      766.6 Mbit
1024   810.1 Mbit      808.6 Mbit

Signed-off-by: Thomas Graf <tgraf@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agosctp: fix incorrect overflow check on autoclose
Xi Wang [Fri, 16 Dec 2011 12:44:15 +0000]
sctp: fix incorrect overflow check on autoclose

[ Upstream commit 2692ba61a82203404abd7dd2a027bda962861f74 ]

Commit 8ffd3208 voids the previous patches f6778aab and 810c0719 for
limiting the autoclose value.  If userspace passes in -1 on 32-bit
platform, the overflow check didn't work and autoclose would be set
to 0xffffffff.

This patch defines a max_autoclose (in seconds) for limiting the value
and exposes it through sysctl, with the following intentions.

1) Avoid overflowing autoclose * HZ.

2) Keep the default autoclose bound consistent across 32- and 64-bit
   platforms (INT_MAX / HZ in this patch).

3) Keep the autoclose value consistent between setsockopt() and
   getsockopt() calls.

Suggested-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agosch_gred: should not use GFP_KERNEL while holding a spinlock
Eric Dumazet [Sun, 11 Dec 2011 23:42:53 +0000]
sch_gred: should not use GFP_KERNEL while holding a spinlock

[ Upstream commit 3f1e6d3fd37bd4f25e5b19f1c7ca21850426c33f ]

gred_change_vq() is called under sch_tree_lock(sch).

This means a spinlock is held, and we are not allowed to sleep in this
context.

We might pre-allocate memory using GFP_KERNEL before taking spinlock,
but this is not suitable for stable material.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agonet: have ipconfig not wait if no dev is available
Gerlando Falauto [Mon, 19 Dec 2011 22:58:04 +0000]
net: have ipconfig not wait if no dev is available

[ Upstream commit cd7816d14953c8af910af5bb92f488b0b277e29d ]

previous commit 3fb72f1e6e6165c5f495e8dc11c5bbd14c73385c
makes IP-Config wait for carrier on at least one network device.

Before waiting (predefined value 120s), check that at least one device
was successfully brought up. Otherwise (e.g. buggy bootloader
which does not set the MAC address) there is no point in waiting
for carrier.

Cc: Micha Nelissen <micha@neli.hopto.org>
Cc: Holger Brunck <holger.brunck@keymile.com>
Signed-off-by: Gerlando Falauto <gerlando.falauto@keymile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agomqprio: Avoid panic if no options are provided
Thomas Graf [Thu, 22 Dec 2011 02:05:07 +0000]
mqprio: Avoid panic if no options are provided

[ Upstream commit 7838f2ce36b6ab5c13ef20b1857e3bbd567f1759 ]

Userspace may not provide TCA_OPTIONS, in fact tc currently does
so not do so if no arguments are specified on the command line.
Return EINVAL instead of panicing.

Signed-off-by: Thomas Graf <tgraf@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agollc: llc_cmsg_rcv was getting called after sk_eat_skb.
Alex Juncu [Thu, 15 Dec 2011 23:01:25 +0000]
llc: llc_cmsg_rcv was getting called after sk_eat_skb.

[ Upstream commit 9cef310fcdee12b49b8b4c96fd8f611c8873d284 ]

Received non stream protocol packets were calling llc_cmsg_rcv that used a
skb after that skb was released by sk_eat_skb. This caused received STP
packets to generate kernel panics.

Signed-off-by: Alexandru Juncu <ajuncu@ixiacom.com>
Signed-off-by: Kunjan Naik <knaik@ixiacom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agoppp: fix pptp double release_sock in pptp_bind()
Djalal Harouni [Tue, 6 Dec 2011 15:47:12 +0000]
ppp: fix pptp double release_sock in pptp_bind()

[ Upstream commit a454daceb78844a09c08b6e2d8badcb76a5d73b9 ]

Signed-off-by: Djalal Harouni <tixxdz@opendz.org>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agonet: bpf_jit: fix an off-one bug in x86_64 cond jump target
Markus Kötter [Sat, 17 Dec 2011 11:39:08 +0000]
net: bpf_jit: fix an off-one bug in x86_64 cond jump target

[ Upstream commit a03ffcf873fe0f2565386ca8ef832144c42e67fa ]

x86 jump instruction size is 2 or 5 bytes (near/long jump), not 2 or 6
bytes.

In case a conditional jump is followed by a long jump, conditional jump
target is one byte past the start of target instruction.

Signed-off-by: Markus Kötter <nepenthesdev@gmail.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agosparc: Fix handling of orig_i0 wrt. debugging when restarting syscalls.
David S. Miller [Mon, 26 Dec 2011 17:30:13 +0000]
sparc: Fix handling of orig_i0 wrt. debugging when restarting syscalls.

[ A combination of upstream commits 1d299bc7732c34d85bd43ac1a8745f5a2fed2078 and
  e88d2468718b0789b4c33da2f7e1cef2a1eee279 ]

Although we provide a proper way for a debugger to control whether
syscall restart occurs, we run into problems because orig_i0 is not
saved and restored properly.

Luckily we can solve this problem without having to make debuggers
aware of the issue.  Across system calls, several registers are
considered volatile and can be safely clobbered.

Therefore we use the pt_regs save area of one of those registers, %g6,
as a place to save and restore orig_i0.

Debuggers transparently will do the right thing because they save and
restore this register already.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agosparc64: Fix masking and shifting in VIS fpcmp emulation.
David S. Miller [Mon, 31 Oct 2011 08:05:49 +0000]
sparc64: Fix masking and shifting in VIS fpcmp emulation.

[ Upstream commit 2e8ecdc008a16b9a6c4b9628bb64d0d1c05f9f92 ]

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agosparc32: Correct the return value of memcpy.
David S. Miller [Wed, 19 Oct 2011 22:31:55 +0000]
sparc32: Correct the return value of memcpy.

[ Upstream commit a52312b88c8103e965979a79a07f6b34af82ca4b ]

Properly return the original destination buffer pointer.

Signed-off-by: David S. Miller <davem@davemloft.net>
Tested-by: Kjetil Oftedal <oftedal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agosparc32: Remove uses of %g7 in memcpy implementation.
David S. Miller [Wed, 19 Oct 2011 22:30:14 +0000]
sparc32: Remove uses of %g7 in memcpy implementation.

[ Upstream commit 21f74d361dfd6a7d0e47574e315f780d8172084a ]

This is setting things up so that we can correct the return
value, so that it properly returns the original destination
buffer pointer.

Signed-off-by: David S. Miller <davem@davemloft.net>
Tested-by: Kjetil Oftedal <oftedal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agosparc32: Remove non-kernel code from memcpy implementation.
David S. Miller [Wed, 19 Oct 2011 22:15:58 +0000]
sparc32: Remove non-kernel code from memcpy implementation.

[ Upstream commit 045b7de9ca0cf09f1adc3efa467f668b89238390 ]

Signed-off-by: David S. Miller <davem@davemloft.net>
Tested-by: Kjetil Oftedal <oftedal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agosparc: Kill custom io_remap_pfn_range().
David S. Miller [Fri, 18 Nov 2011 02:17:59 +0000]
sparc: Kill custom io_remap_pfn_range().

[ Upstream commit 3e37fd3153ac95088a74f5e7c569f7567e9f993a ]

To handle the large physical addresses, just make a simple wrapper
around remap_pfn_range() like MIPS does.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agosparc64: Patch sun4v code sequences properly on module load.
David S. Miller [Fri, 18 Nov 2011 06:44:58 +0000]
sparc64: Patch sun4v code sequences properly on module load.

[ Upstream commit 0b64120cceb86e93cb1bda0dc055f13016646907 ]

Some of the sun4v code patching occurs in inline functions visible
to, and usable by, modules.

Therefore we have to patch them up during module load.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agosparc32: Be less strict in matching %lo part of relocation.
David S. Miller [Wed, 14 Dec 2011 18:05:22 +0000]
sparc32: Be less strict in matching %lo part of relocation.

[ Upstream commit b1f44e13a525d2ffb7d5afe2273b7169d6f2222e ]

The "(insn & 0x01800000) != 0x01800000" test matches 'restore'
but that is a legitimate place to see the %lo() part of a 32-bit
symbol relocation, particularly in tail calls.

Signed-off-by: David S. Miller <davem@davemloft.net>
Tested-by: Sergei Trofimovich <slyfox@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agosparc64: Fix MSIQ HV call ordering in pci_sun4v_msiq_build_irq().
David S. Miller [Thu, 22 Dec 2011 21:23:59 +0000]
sparc64: Fix MSIQ HV call ordering in pci_sun4v_msiq_build_irq().

[ Upstream commit 7cc8583372a21d98a23b703ad96cab03180b5030 ]

This silently was working for many years and stopped working on
Niagara-T3 machines.

We need to set the MSIQ to VALID before we can set it's state to IDLE.

On Niagara-T3, setting the state to IDLE first was causing HV_EINVAL
errors.  The hypervisor documentation says, rather ambiguously, that
the MSIQ must be "initialized" before one can set the state.

I previously understood this to mean merely that a successful setconf()
operation has been performed on the MSIQ, which we have done at this
point.  But it seems to also mean that it has been set VALID too.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agompt2sas: fix non-x86 crash on shutdown
Nagalakshmi Nandigama [Wed, 4 Jan 2012 15:25:13 +0000]
mpt2sas: fix non-x86 crash on shutdown

Upstrem commit: 911ae9434f83e7355d343f6c2be3ef5b00ea7aed

There's a bug in the MSIX backup and restore routines that cause a crash on
non-x86 (direct access to PCI space not via read/write).  These routines are
unnecessary and were removed by the above commit, so also remove them from
stable to fix the crash.

Signed-off-by: Nagalakshmi Nandigama <nagalakshmi.nandigama@lsi.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agomm/mempolicy.c: refix mbind_range() vma issue
KOSAKI Motohiro [Wed, 28 Dec 2011 23:57:11 +0000]
mm/mempolicy.c: refix mbind_range() vma issue

commit e26a51148f3ebd859bca8bf2e0f212839b447f62 upstream.

commit 8aacc9f550 ("mm/mempolicy.c: fix pgoff in mbind vma merge") is the
slightly incorrect fix.

Why? Think following case.

1. map 4 pages of a file at offset 0

   [0123]

2. map 2 pages just after the first mapping of the same file but with
   page offset 2

   [0123][23]

3. mbind() 2 pages from the first mapping at offset 2.
   mbind_range() should treat new vma is,

   [0123][23]
     |23|
     mbind vma

   but it does

   [0123][23]
     |01|
     mbind vma

   Oops. then, it makes wrong vma merge and splitting ([01][0123] or similar).

This patch fixes it.

[testcase]
  test result - before the patch

case4: 126: test failed. expect '2,4', actual '2,2,2'
        case5: passed
case6: passed
case7: passed
case8: passed
case_n: 246: test failed. expect '4,2', actual '1,4'

------------[ cut here ]------------
kernel BUG at mm/filemap.c:135!
invalid opcode: 0000 [#4] SMP DEBUG_PAGEALLOC

(snip long bug on messages)

  test result - after the patch

case4: passed
        case5: passed
case6: passed
case7: passed
case8: passed
case_n: passed

  source:  mbind_vma_test.c
============================================================
 #include <numaif.h>
 #include <numa.h>
 #include <sys/mman.h>
 #include <stdio.h>
 #include <unistd.h>
 #include <stdlib.h>
 #include <string.h>

static unsigned long pagesize;
void* mmap_addr;
struct bitmask *nmask;
char buf[1024];
FILE *file;
char retbuf[10240] = "";
int mapped_fd;

char *rubysrc = "ruby -e '\
  pid = %d; \
  vstart = 0x%llx; \
  vend = 0x%llx; \
  s = `pmap -q #{pid}`; \
  rary = []; \
  s.each_line {|line|; \
    ary=line.split(\" \"); \
    addr = ary[0].to_i(16); \
    if(vstart <= addr && addr < vend) then \
      rary.push(ary[1].to_i()/4); \
    end; \
  }; \
  print rary.join(\",\"); \
'";

void init(void)
{
void* addr;
char buf[128];

nmask = numa_allocate_nodemask();
numa_bitmask_setbit(nmask, 0);

pagesize = getpagesize();

sprintf(buf, "%s", "mbind_vma_XXXXXX");
mapped_fd = mkstemp(buf);
if (mapped_fd == -1)
perror("mkstemp "), exit(1);
unlink(buf);

if (lseek(mapped_fd, pagesize*8, SEEK_SET) < 0)
perror("lseek "), exit(1);
if (write(mapped_fd, "\0", 1) < 0)
perror("write "), exit(1);

addr = mmap(NULL, pagesize*8, PROT_NONE,
    MAP_SHARED, mapped_fd, 0);
if (addr == MAP_FAILED)
perror("mmap "), exit(1);

if (mprotect(addr+pagesize, pagesize*6, PROT_READ|PROT_WRITE) < 0)
perror("mprotect "), exit(1);

mmap_addr = addr + pagesize;

/* make page populate */
memset(mmap_addr, 0, pagesize*6);
}

void fin(void)
{
void* addr = mmap_addr - pagesize;
munmap(addr, pagesize*8);

memset(buf, 0, sizeof(buf));
memset(retbuf, 0, sizeof(retbuf));
}

void mem_bind(int index, int len)
{
int err;

err = mbind(mmap_addr+pagesize*index, pagesize*len,
    MPOL_BIND, nmask->maskp, nmask->size, 0);
if (err)
perror("mbind "), exit(err);
}

void mem_interleave(int index, int len)
{
int err;

err = mbind(mmap_addr+pagesize*index, pagesize*len,
    MPOL_INTERLEAVE, nmask->maskp, nmask->size, 0);
if (err)
perror("mbind "), exit(err);
}

void mem_unbind(int index, int len)
{
int err;

err = mbind(mmap_addr+pagesize*index, pagesize*len,
    MPOL_DEFAULT, NULL, 0, 0);
if (err)
perror("mbind "), exit(err);
}

void Assert(char *expected, char *value, char *name, int line)
{
if (strcmp(expected, value) == 0) {
fprintf(stderr, "%s: passed\n", name);
return;
}
else {
fprintf(stderr, "%s: %d: test failed. expect '%s', actual '%s'\n",
name, line,
expected, value);
// exit(1);
}
}

/*
      AAAA
    PPPPPPNNNNNN
    might become
    PPNNNNNNNNNN
    case 4 below
*/
void case4(void)
{
init();
sprintf(buf, rubysrc, getpid(), mmap_addr, mmap_addr+pagesize*6);

mem_bind(0, 4);
mem_unbind(2, 2);

file = popen(buf, "r");
fread(retbuf, sizeof(retbuf), 1, file);
Assert("2,4", retbuf, "case4", __LINE__);

fin();
}

/*
       AAAA
 PPPPPPNNNNNN
 might become
 PPPPPPPPPPNN
 case 5 below
*/
void case5(void)
{
init();
sprintf(buf, rubysrc, getpid(), mmap_addr, mmap_addr+pagesize*6);

mem_bind(0, 2);
mem_bind(2, 2);

file = popen(buf, "r");
fread(retbuf, sizeof(retbuf), 1, file);
Assert("4,2", retbuf, "case5", __LINE__);

fin();
}

/*
    AAAA
PPPPNNNNXXXX
might become
PPPPPPPPPPPP 6
*/
void case6(void)
{
init();
sprintf(buf, rubysrc, getpid(), mmap_addr, mmap_addr+pagesize*6);

mem_bind(0, 2);
mem_bind(4, 2);
mem_bind(2, 2);

file = popen(buf, "r");
fread(retbuf, sizeof(retbuf), 1, file);
Assert("6", retbuf, "case6", __LINE__);

fin();
}

/*
    AAAA
PPPPNNNNXXXX
might become
PPPPPPPPXXXX 7
*/
void case7(void)
{
init();
sprintf(buf, rubysrc, getpid(), mmap_addr, mmap_addr+pagesize*6);

mem_bind(0, 2);
mem_interleave(4, 2);
mem_bind(2, 2);

file = popen(buf, "r");
fread(retbuf, sizeof(retbuf), 1, file);
Assert("4,2", retbuf, "case7", __LINE__);

fin();
}

/*
    AAAA
PPPPNNNNXXXX
might become
PPPPNNNNNNNN 8
*/
void case8(void)
{
init();
sprintf(buf, rubysrc, getpid(), mmap_addr, mmap_addr+pagesize*6);

mem_bind(0, 2);
mem_interleave(4, 2);
mem_interleave(2, 2);

file = popen(buf, "r");
fread(retbuf, sizeof(retbuf), 1, file);
Assert("2,4", retbuf, "case8", __LINE__);

fin();
}

void case_n(void)
{
init();
sprintf(buf, rubysrc, getpid(), mmap_addr, mmap_addr+pagesize*6);

/* make redundunt mappings [0][1234][34][7] */
mmap(mmap_addr + pagesize*4, pagesize*2, PROT_READ|PROT_WRITE,
     MAP_FIXED|MAP_SHARED, mapped_fd, pagesize*3);

/* Expect to do nothing. */
mem_unbind(2, 2);

file = popen(buf, "r");
fread(retbuf, sizeof(retbuf), 1, file);
Assert("4,2", retbuf, "case_n", __LINE__);

fin();
}

int main(int argc, char** argv)
{
case4();
case5();
case6();
case7();
case8();
case_n();

return 0;
}
=============================================================

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Caspar Zhang <caspar@casparzhang.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agomm: hugetlb: fix non-atomic enqueue of huge page
Hillf Danton [Wed, 28 Dec 2011 23:57:16 +0000]
mm: hugetlb: fix non-atomic enqueue of huge page

commit b0365c8d0cb6e79eb5f21418ae61ab511f31b575 upstream.

If a huge page is enqueued under the protection of hugetlb_lock, then the
operation is atomic and safe.

Signed-off-by: Hillf Danton <dhillf@gmail.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agodrm/radeon/kms: bail on BTC parts if MC ucode is missing
Alex Deucher [Wed, 21 Dec 2011 16:58:17 +0000]
drm/radeon/kms: bail on BTC parts if MC ucode is missing

commit 77e00f2ea94abee1ad13bdfde19cf7aa25992b0e upstream.

We already do this for cayman, need to also do it for
BTC parts.  The default memory and voltage setup is not
adequate for advanced operation.  Continuing will
result in an unusable display.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agowatchdog: hpwdt: Changes to handle NX secure bit in 32bit path
Mingarelli, Thomas [Mon, 7 Nov 2011 09:59:00 +0000]
watchdog: hpwdt: Changes to handle NX secure bit in 32bit path

commit e67d668e147c3b4fec638c9e0ace04319f5ceccd upstream.

This patch makes use of the set_memory_x() kernel API in order
to make necessary BIOS calls to source NMIs.

This is needed for SLES11 SP2 and the latest upstream kernel as it appears
the NX Execute Disable has grown in its control.

Signed-off by: Thomas Mingarelli <thomas.mingarelli@hp.com>
Signed-off by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agofutex: Fix uninterruptible loop due to gate_area
Hugh Dickins [Sat, 31 Dec 2011 19:44:01 +0000]
futex: Fix uninterruptible loop due to gate_area

commit e6780f7243eddb133cc20ec37fa69317c218b709 upstream.

It was found (by Sasha) that if you use a futex located in the gate
area we get stuck in an uninterruptible infinite loop, much like the
ZERO_PAGE issue.

While looking at this problem, PeterZ realized you'll get into similar
trouble when hitting any install_special_pages() mapping.  And are there
still drivers setting up their own special mmaps without page->mapping,
and without special VM or pte flags to make get_user_pages fail?

In most cases, if page->mapping is NULL, we do not need to retry at all:
Linus points out that even /proc/sys/vm/drop_caches poses no problem,
because it ends up using remove_mapping(), which takes care not to
interfere when the page reference count is raised.

But there is still one case which does need a retry: if memory pressure
called shmem_writepage in between get_user_pages_fast dropping page
table lock and our acquiring page lock, then the page gets switched from
filecache to swapcache (and ->mapping set to NULL) whatever the refcount.
Fault it back in to get the page->mapping needed for key->shared.inode.

Reported-by: Sasha Levin <levinsasha928@gmail.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agooprofile, arm/sh: Fix oprofile_arch_exit() linkage issue
Vladimir Zapolskiy [Thu, 22 Dec 2011 15:15:40 +0000]
oprofile, arm/sh: Fix oprofile_arch_exit() linkage issue

commit 55205c916e179e09773d98d290334d319f45ac6b upstream.

This change fixes a linking problem, which happens if oprofile
is selected to be compiled as built-in:

  `oprofile_arch_exit' referenced in section `.init.text' of
  arch/arm/oprofile/built-in.o: defined in discarded section
  `.exit.text' of arch/arm/oprofile/built-in.o

The problem is appeared after commit 87121ca504, which
introduced oprofile_arch_exit() calls from __init function. Note
that the aforementioned commit has been backported to stable
branches, and the problem is known to be reproduced at least
with 3.0.13 and 3.1.5 kernels.

Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@nokia.com>
Signed-off-by: Robert Richter <robert.richter@amd.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: oprofile-list <oprofile-list@lists.sourceforge.net>
Link: http://lkml.kernel.org/r/20111222151540.GB16765@erda.amd.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agoARM: 7220/1: mmc: mmci: Fixup error handling for dma
Ulf Hansson [Tue, 13 Dec 2011 15:58:43 +0000]
ARM: 7220/1: mmc: mmci: Fixup error handling for dma

commit 3b6e3c73851a9a4b0e6ed9d378206341dd65e8a5 upstream.

When getting a cmd irq during an ongoing data transfer
with dma, the dma job were never terminated. This is now
corrected.

Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Per Forlin <per.forlin@stericsson.com>
Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>