9 years agoext2: Add ext2_sb_info s_lock spinlock
Jan Blunck [Wed, 14 Apr 2010 12:38:38 +0000]
ext2: Add ext2_sb_info s_lock spinlock

Add a spinlock that protects against concurrent modifications of
s_mount_state, s_blocks_last, s_overhead_last and the content of the
superblock's buffer pointed to by sbi->s_es. The spinlock is now used in
ext2_xattr_update_super_block() which was setting the
EXT2_FEATURE_COMPAT_EXT_ATTR flag on the superblock without protection
before. Likewise the spinlock is used in ext2_show_options() to have a
consistent view of the mount options.

This is a preparation patch for removing the BKL from ext2 in the next
patch.

Signed-off-by: Jan Blunck <jblunck@suse.de>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Jan Kara <jack@suse.cz>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Jan Kara <jack@suse.cz>

9 years agoext2: Move ext2_write_super() out of ext2_setup_super()
Jan Blunck [Wed, 14 Apr 2010 12:38:37 +0000]
ext2: Move ext2_write_super() out of ext2_setup_super()

Move ext2_write_super() out of ext2_setup_super() as a preparation for the
next patch that adds a new lock for superblock fields.

Signed-off-by: Jan Blunck <jblunck@suse.de>
Signed-off-by: Jan Kara <jack@suse.cz>

9 years agoext2: Fold ext2_commit_super() into ext2_sync_super()
Jan Blunck [Wed, 14 Apr 2010 12:38:36 +0000]
ext2: Fold ext2_commit_super() into ext2_sync_super()

Both function originally did similar things except that ext2_sync_super()
is returning after the call to sync_dirty_buffer(sbh). Therefore this
patch adds a wait flag to tell ext2_sync_super() if it has to call
sync_dirty_buffer() to wait for in-progress I/O to finish.

Signed-off-by: Jan Blunck <jblunck@suse.de>
Signed-off-by: Jan Kara <jack@suse.cz>

9 years agoext2: Remove duplicate code from ext2_sync_fs()
Jan Blunck [Wed, 14 Apr 2010 12:38:35 +0000]
ext2: Remove duplicate code from ext2_sync_fs()

Depending in the state (valid or unchecked) of the filesystem either
ext2_sync_super() or ext2_commit_super() is called. If the filesystem is
currently valid (it is checked), we first mark it unchecked and afterwards
duplicate the work that ext2_sync_super() is doing later. Therefore this
patch removes the duplicate code and calls ext2_sync_super() directly after
marking the filesystem unchecked.

Signed-off-by: Jan Blunck <jblunck@suse.de>
Signed-off-by: Jan Kara <jack@suse.cz>

9 years agoext2: Set the write time in ext2_sync_fs()
Jan Blunck [Wed, 14 Apr 2010 12:38:34 +0000]
ext2: Set the write time in ext2_sync_fs()

This is probably a typo since the write time should actually be updated by
ext2_sync_fs() instead of the mount time.

Signed-off-by: Jan Blunck <jblunck@suse.de>
Signed-off-by: Jan Kara <jack@suse.cz>

9 years agoext2: Use ext2_clear_super_error() in ext2_sync_fs()
Jan Blunck [Wed, 14 Apr 2010 12:38:33 +0000]
ext2: Use ext2_clear_super_error() in ext2_sync_fs()

ext2_sync_fs() used to duplicate the code from ext2_clear_super_error().

Signed-off-by: Jan Blunck <jblunck@suse.de>
Signed-off-by: Jan Kara <jack@suse.cz>

9 years agoext3: init statistics after journal recovery v2
Dmitry Monakhov [Mon, 12 Apr 2010 19:46:00 +0000]
ext3: init statistics after journal recovery v2

Currently block/inode/dir counters are initialized before journal was
recovered. In fact after journal recovery this info will probably
change which results in incorrect numbers returned from statfs(2).
BUG:#15768

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Jan Kara <jack@suse.cz>

9 years agoext2: remove useless call to brelse() in ext2_free_inode()
Francis Moreau [Thu, 8 Apr 2010 09:35:17 +0000]
ext2: remove useless call to brelse() in ext2_free_inode()

This patch removes a useless call to brelse(bitmap_bh) since at that
point bitmap_bh is NULL and slightly cleans up bitmap_bh handling.

Signed-off-by: Francis Moreau <francis.moro@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>

9 years agoquota: optimize mark_dirty logic
Dmitry Monakhov [Sat, 27 Mar 2010 12:15:38 +0000]
quota: optimize mark_dirty logic

- Skip locking if quota is dirty already.
- Return old quota state to help fs-specciffic implementation to optimize
  case where quota was dirty already.

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Jan Kara <jack@suse.cz>

9 years agoext2: Avoid loading bitmaps for full groups during block allocation
Jan Kara [Mon, 29 Mar 2010 11:55:39 +0000]
ext2: Avoid loading bitmaps for full groups during block allocation

There is no point in loading bitmap for groups which are completely full.
This causes noticeable performance problems (and memory pressure) on small
systems with large full filesystem
(http://marc.info/?l=linux-ext4&m=126843108314310&w=2).

Port of the same ext3 patch.

Signed-off-by: Jan Kara <jack@suse.cz>

9 years agoext3: Avoid loading bitmaps for full groups during block allocation
Frans van de Wiel [Mon, 15 Mar 2010 18:29:34 +0000]
ext3: Avoid loading bitmaps for full groups during block allocation

There is no point in loading bitmap for groups which are completely full.
This causes noticeable performance problems (and memory pressure) on small
systems with large full filesystem
(http://marc.info/?l=linux-ext4&m=126843108314310&w=2).

Jan Kara: Added a comment and changed check to use cpu-endian value.

Signed-off-by: "Frans van de Wiel" <fvdw@fvdw.eu>
Signed-off-by: Jan Kara <jack@suse.cz>

9 years agoFix networking tree iscsi_tcp.c mis-merge
Linus Torvalds [Fri, 21 May 2010 16:48:36 +0000]
Fix networking tree iscsi_tcp.c mis-merge

The removal of the 'waitqueue_active()' test in commit d7d05548a6
("[SCSI] iscsi_tcp: fix relogin/shutdown hang") got incorrectly resolved
by David when he back-merged the main git tree into the networking tree
in commit 278554bd65 ("Merge branch 'master' of master.kernel.org:...").

There was a content conflict due to 'sock->sk->sk_sleep' being changed
into 'sk_sleep(sock->sk)' in the networking tree, but David didn't pick
up the iscsi change from the main tree.

Reported-by: James Bottomley <James.Bottomley@suse.de>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoi2c-nforce2: Remove redundant error messages on ACPI conflict
Chase Douglas [Fri, 21 May 2010 16:41:01 +0000]
i2c-nforce2: Remove redundant error messages on ACPI conflict

The ACPI subsystem strictly checks for resource conflicts. When there's
a conflict, it outputs a warning message with all the details needed to
properly diagnose the underlying issue. However, the i2c-nforce2 driver
also prints its own message. Not only is the message redundant, it is at
the KERN_ERR level, which overrides some bootsplash screens for no good
reason. This change removes the two lines that print out the error
messages.

Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

9 years agoi2c: Use <linux/io.h> instead of <asm/io.h>
H Hartley Sweeten [Fri, 21 May 2010 16:41:01 +0000]
i2c: Use <linux/io.h> instead of <asm/io.h>

As warned by checkpatch.pl, <linux/io.h> should be used instead of
<asm/io.h>.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

9 years agoi2c-algo-pca: Fix coding style issues
Farid Hammane [Fri, 21 May 2010 16:41:00 +0000]
i2c-algo-pca: Fix coding style issues

Fix up some coding style issues. i2c-algo-pca.c has been built
successfully after applying this patch and the binary object is
still exactly the same. Other issues found by checkpatch.pl were
voluntarily not fixed, either to keep readability, or because of
false positive errors.

Signed-off-by: Farid Hammane <farid.hammane@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

9 years agoi2c-dev: Fix all coding style issues
Farid Hammane [Fri, 21 May 2010 16:40:59 +0000]
i2c-dev: Fix all coding style issues

Fix all coding style issues found by checkpatch.pl.

Signed-off-by: Farid Hammane <farid.hammane@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

9 years agoi2c-core: Fix some coding style issues
Farid Hammane [Fri, 21 May 2010 16:40:58 +0000]
i2c-core: Fix some coding style issues

Fix up coding style issues found by the checkpatch.pl tool.

Signed-off-by: Farid Hammane <farid.hammane@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

9 years agoi2c-gpio: Move initialization code to subsys_initcall()
Marek Szyprowski [Fri, 21 May 2010 16:40:58 +0000]
i2c-gpio: Move initialization code to subsys_initcall()

GPIO driven I2C bus can be used for controlling the PMIC chip. The
example of such configuration is Samsung Aquila board.

This patch moves initialization code to subsys_initcall() to ensure
that the i2c bus is available early so the regulators can be quickly
probed and available for other devices on their probe() call.

Such solution has been proposed by Mark Brown to fix the problem of
the regulators not beeing available on the peripheral device probe():
http://lists.infradead.org/pipermail/linux-arm-kernel/2010-March/011971.html

Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Reviewed-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

9 years agoi2c-parport: Make template structure const
Jean Delvare [Fri, 21 May 2010 16:40:57 +0000]
i2c-parport: Make template structure const

parport_algo_data is a template so it can be marked const.

Signed-off-by: Jean Delvare <khali@linux-fr.org>

9 years agoi2c-dev: Remove unnecessary casts
H Hartley Sweeten [Fri, 21 May 2010 16:40:57 +0000]
i2c-dev: Remove unnecessary casts

The private_data member of struct file is a void *, there is no need
to cast it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

9 years agoat24: Fall back to byte or word reads if needed
Jean Delvare [Fri, 21 May 2010 16:40:57 +0000]
at24: Fall back to byte or word reads if needed

Increase the portability of the at24 driver by letting it read from
EEPROM chips connected to cheap SMBus controllers that support neither
raw I2C messages nor even I2C block reads. All SMBus controllers
should support either word reads or byte reads, so read support
becomes universal, much like with the legacy "eeprom" driver.

Obviously, this only works with EEPROM chips up to AT24C16, that use
8-bit offset addressing. 16-bit offset addressing is almost impossible
to support on SMBus controllers.

I did not add universal support for writes, as I had no immediate need
for this, but it could be added later if needed (with the same
performance issue as byte and word reads have, of course.)

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Reviewed-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: Konstantin Lazarev <klazarev@sbcglobal.net>

9 years agoi2c-stub: Expose the default functionality flags
Jean Delvare [Fri, 21 May 2010 16:40:56 +0000]
i2c-stub: Expose the default functionality flags

It is easier to adjust the flags when you know their default value.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Mark M. Hoffman <mhoffman@lightlink.com>

9 years agoi2c/scx200_acb: Make PCI device ids constant
Jean Delvare [Fri, 21 May 2010 16:40:56 +0000]
i2c/scx200_acb: Make PCI device ids constant

Make PCI device ids constant as we just did for many other i2c bus
drivers already.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Márton Németh <nm127@freemail.hu>

9 years agoi2c-i801: Fix all checkpatch warnings
Ivo Manca [Fri, 21 May 2010 16:40:55 +0000]
i2c-i801: Fix all checkpatch warnings

Fix all checkpatch warnings. No functional changes are made.

Signed-off-by: Ivo Manca <pinkel@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

9 years agoi2c-i801: All newer devices have all the optional features
Jean Delvare [Fri, 21 May 2010 16:40:55 +0000]
i2c-i801: All newer devices have all the optional features

Only the oldest devices lack some of the features supported by this
driver. List them explicitly, and default to all features enabled for
all other chips, including the ones added through sysfs. This will
make future driver maintenance easier.

In the unlikely event of a not yet supported device not implementing
all the features, one can always use the disable_features module
parameter to prevent the driver from attempting to use them.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Seth Heasley <seth.heasley@intel.com>

9 years agoi2c-i801: Let the user disable selected driver features
Jean Delvare [Fri, 21 May 2010 16:40:54 +0000]
i2c-i801: Let the user disable selected driver features

Let the user disable selected features normally supported by the
device. This makes it possible to work around possible driver or
hardware bugs if the feature in question doesn't work as intended
for whatever reason.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Felix Rubinstein <felixru@gmail.com>

9 years agonet: Expose all network devices in a namespaces in sysfs
Eric W. Biederman [Wed, 5 May 2010 00:36:49 +0000]
net: Expose all network devices in a namespaces in sysfs

This reverts commit aaf8cdc34ddba08122f02217d9d684e2f9f5d575.

Drivers like the ipw2100 call device_create_group when they
are initialized and device_remove_group when they are shutdown.
Moving them between namespaces deletes their sysfs groups early.

In particular the following call chain results.
netdev_unregister_kobject -> device_del -> kobject_del -> sysfs_remove_dir
With sysfs_remove_dir recursively deleting all of it's subdirectories,
and nothing adding them back.

Ouch!

Therefore we need to call something that ultimate calls sysfs_mv_dir
as that sysfs function can move sysfs directories between namespaces
without deleting their subdirectories or their contents.   Allowing
us to avoid placing extra boiler plate into every driver that does
something interesting with sysfs.

Currently the function that provides that capability is device_rename.
That is the code works without nasty side effects as originally written.

So remove the misguided fix for moving devices between namespaces.  The
bug in the kobject layer that inspired it has now been recognized and
fixed.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agohotplug: netns aware uevent_helper
Eric W. Biederman [Wed, 5 May 2010 00:36:48 +0000]
hotplug: netns aware uevent_helper

It only makes sense for uevent_helper to get events
in the intial namespaces.  It's invocation is not
per namespace and it is not clear how we could make
it's invocation namespace aware.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agokobj: Send hotplug events in the proper namespace.
Eric W. Biederman [Wed, 5 May 2010 00:36:47 +0000]
kobj: Send hotplug events in the proper namespace.

Utilize netlink_broacast_filtered to allow sending hotplug events
in the proper namespace.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agonetlink: Implment netlink_broadcast_filtered
Eric W. Biederman [Wed, 5 May 2010 00:36:46 +0000]
netlink: Implment netlink_broadcast_filtered

When netlink sockets are used to convey data that is in a namespace
we need a way to select a subset of the listening sockets to deliver
the packet to.  For the network namespace we have been doing this
by only transmitting packets in the correct network namespace.

For data belonging to other namespaces netlink_bradcast_filtered
provides a mechanism that allows us to examine the destination
socket and to decide if we should transmit the specified packet
to it.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agonet/sysfs: Fix the bitrot in network device kobject namespace support
Eric W. Biederman [Mon, 17 May 2010 04:59:45 +0000]
net/sysfs: Fix the bitrot in network device kobject namespace support

I had a couple of stupid bugs in:
netns: Teach network device kobjects which namespace they are in.

- I duplicated the Kconfig for the NET_NS
- The build was broken when sysfs was not compiled in

The sysfs breakage is because after I moved the operations
for the sysfs to the kobject layer, to make things cleaner
I forgot to move the ifdefs.  Opps.

I'm not quite certain how I got introduced a second NET_NS Kconfig,
but it was probably a 3 way merge somewhere along the way that
did not notice that the NET_NS Kconfig option had mvoed and thout
that was a bug.  It probably slipped in because it used to be the
sysfs patches were the first patches in my network namespace patches.
Some things just don't go like you would expect.

Neither of these bugs actually affect anything in the common case
but they should be fixed.

Thanks to Serge for noticing they were present.

Reported-by: Serge E. Hallyn <serue@us.ibm.com>
Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com>
Acked-by: David S. Miller <davem@davemloft.net>

9 years agonetns: Teach network device kobjects which namespace they are in.
Eric W. Biederman [Wed, 5 May 2010 00:36:45 +0000]
netns: Teach network device kobjects which namespace they are in.

The problem.  Network devices show up in sysfs and with the network
namespace active multiple devices with the same name can show up in
the same directory, ouch!

To avoid that problem and allow existing applications in network namespaces
to see the same interface that is currently presented in sysfs, this
patch enables the tagging directory support in sysfs.

By using the network namespace pointers as tags to separate out the
the sysfs directory entries we ensure that we don't have conflicts
in the directories and applications only see a limited set of
the network devices.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agokobject: Send hotplug events in all network namespaces
Eric W. Biederman [Wed, 5 May 2010 00:36:44 +0000]
kobject: Send hotplug events in all network namespaces

Open a copy of the uevent kernel socket in each network
namespace so we can send uevents in all network namespaces.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agodriver-core: fix Typo in drivers/base/core.c for CONFIG_MODULE
Christoph Egger [Mon, 17 May 2010 14:57:58 +0000]
driver-core: fix Typo in drivers/base/core.c for CONFIG_MODULE

In this code section the final S of CONFIG_MODULES was missed making
the whole check useless

Signed-off-by: Christoph Egger <siccegge@cs.fau.de>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agopci: check caps from sysfs file open to read device dependent config space
Chris Wright [Thu, 13 May 2010 17:43:07 +0000]
pci: check caps from sysfs file open to read device dependent config space

The PCI config space bin_attr read handler has a hardcoded CAP_SYS_ADMIN
check to verify privileges before allowing a user to read device
dependent config space.  This is meant to protect from an unprivileged
user potentially locking up the box.

When assigning a PCI device directly to a guest with libvirt and KVM,
the sysfs config space file is chown'd to the unprivileged user that
the KVM guest will run as.  The guest needs to have full access to the
device's config space since it's responsible for driving the device.
However, despite being the owner of the sysfs file, the CAP_SYS_ADMIN
check will not allow read access beyond the config header.

With this patch we check privileges against the capabilities used when
openining the sysfs file.  The allows a privileged process to open the
file and hand it to an unprivileged process, and the unprivileged process
can still read all of the config space.

Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agosysfs: add struct file* to bin_attr callbacks
Chris Wright [Thu, 13 May 2010 01:28:57 +0000]
sysfs: add struct file* to bin_attr callbacks

This allows bin_attr->read,write,mmap callbacks to check file specific data
(such as inode owner) as part of any privilege validation.

Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agosysfs: Remove usage of S_BIAS to avoid merge conflict with the vfs tree
Eric W. Biederman [Tue, 18 May 2010 19:58:33 +0000]
sysfs: Remove usage of S_BIAS to avoid merge conflict with the vfs tree

In Al's latest vfs tree the code is reworked and S_BIAS has been removed.

It turns out that checking to see if a super block is in the
middle of an unmount in sysfs_exit_ns is unnecessary because we
remove the super_block from the s_supers/s_instances list before
struct sysfs_super_info pointed to by sb->s_fs_info is freed.

For now just delete the unnecessary check to see if a superblock is in the
middle of an unmount, it isn't necessary with or without Al's changes
and it just causes a needless conflict.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agosysfs: Don't use enums in inline function declaration.
Eric W. Biederman [Wed, 5 May 2010 21:54:00 +0000]
sysfs: Don't use enums in inline function declaration.

It appears gcc can't cope with using an enum that is only declared in
an inline function declaration, that doesn't even use the variable
that is so declared.

Avoid the silliness and replace the enum with an int, and make gcc
happy.

Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agosysfs-namespaces: add a high-level Documentation file
Serge E. Hallyn [Wed, 5 May 2010 02:45:38 +0000]
sysfs-namespaces: add a high-level Documentation file

The first three paragraphs are almost verbatim taken from Eric's
commit message on the patch introducing network ns tags.  The next
two paragraphs I wrote to be a brief high level overview.  The last
section is taken from the commit message on "Implement sysfs tagged
directory support", but updated.  Hopefully correctly.

Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agosysfs: Comment sysfs directory tagging logic
Serge E. Hallyn [Mon, 3 May 2010 21:23:15 +0000]
sysfs: Comment sysfs directory tagging logic

Add some in-line comments to explain the new infrastructure, which
was introduced to support sysfs directory tagging with namespaces.
I think an overall description someplace might be good too, but it
didn't really seem to fit into Documentation/filesystems/sysfs.txt,
which appears more geared toward users, rather than maintainers, of
sysfs.

(Tejun, please let me know if I can make anything clearer or failed
altogether to comment something that should be commented.)

Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agodriver core: Implement ns directory support for device classes.
Eric W. Biederman [Tue, 30 Mar 2010 18:31:29 +0000]
driver core: Implement ns directory support for device classes.

device_del and device_rename were modified to use
sysfs_delete_link and sysfs_rename_link respectively to ensure
when these operations happen on devices whose classes
are in namespace directories they work properly.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Benjamin Thery <benjamin.thery@bull.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agosysfs: Implement sysfs_delete_link
Eric W. Biederman [Tue, 30 Mar 2010 18:31:28 +0000]
sysfs: Implement sysfs_delete_link

When removing a symlink sysfs_remove_link does not provide
enough information to figure out which tagged directory the symlink
falls in.  So I need sysfs_delete_link which is passed the target
of the symlink to delete.

sysfs_rename_link is updated to call sysfs_delete_link instead
of sysfs_remove_link as we have all of the information necessary
and the callers are interesting.

Both of these functions now have enough information to find a symlink
in a tagged directory.  The only restriction is that they must be called
before the target kobject is renamed or deleted.  If they are called
later I loose track of which tag the target kobject was marked with
and can no longer find the old symlink to remove it.

This patch was split from an earlier patch.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Benjamin Thery <benjamin.thery@bull.net>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agosysfs: Add support for tagged directories with untagged members.
Eric W. Biederman [Tue, 30 Mar 2010 18:31:27 +0000]
sysfs: Add support for tagged directories with untagged members.

I had hopped to avoid this but the bonding driver adds a file
to /sys/class/net/  and the easiest way to handle that file is
to make it untagged and to register it only once.

So relax the rules on tagged directories, and make bonding work.

Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agosysfs: Implement sysfs tagged directory support.
Eric W. Biederman [Tue, 30 Mar 2010 18:31:26 +0000]
sysfs: Implement sysfs tagged directory support.

The problem.  When implementing a network namespace I need to be able
to have multiple network devices with the same name.  Currently this
is a problem for /sys/class/net/*, /sys/devices/virtual/net/*, and
potentially a few other directories of the form /sys/ ... /net/*.

What this patch does is to add an additional tag field to the
sysfs dirent structure.  For directories that should show different
contents depending on the context such as /sys/class/net/, and
/sys/devices/virtual/net/ this tag field is used to specify the
context in which those directories should be visible.  Effectively
this is the same as creating multiple distinct directories with
the same name but internally to sysfs the result is nicer.

I am calling the concept of a single directory that looks like multiple
directories all at the same path in the filesystem tagged directories.

For the networking namespace the set of directories whose contents I need
to filter with tags can depend on the presence or absence of hotplug
hardware or which modules are currently loaded.  Which means I need
a simple race free way to setup those directories as tagged.

To achieve a reace free design all tagged directories are created
and managed by sysfs itself.

Users of this interface:
- define a type in the sysfs_tag_type enumeration.
- call sysfs_register_ns_types with the type and it's operations
- sysfs_exit_ns when an individual tag is no longer valid

- Implement mount_ns() which returns the ns of the calling process
  so we can attach it to a sysfs superblock.
- Implement ktype.namespace() which returns the ns of a syfs kobject.

Everything else is left up to sysfs and the driver layer.

For the network namespace mount_ns and namespace() are essentially
one line functions, and look to remain that.

Tags are currently represented a const void * pointers as that is
both generic, prevides enough information for equality comparisons,
and is trivial to create for current users, as it is just the
existing namespace pointer.

The work needed in sysfs is more extensive.  At each directory
or symlink creating I need to check if the directory it is being
created in is a tagged directory and if so generate the appropriate
tag to place on the sysfs_dirent.  Likewise at each symlink or
directory removal I need to check if the sysfs directory it is
being removed from is a tagged directory and if so figure out
which tag goes along with the name I am deleting.

Currently only directories which hold kobjects, and
symlinks are supported.  There is not enough information
in the current file attribute interfaces to give us anything
to discriminate on which makes it useless, and there are
no potential users which makes it an uninteresting problem
to solve.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Benjamin Thery <benjamin.thery@bull.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agokobj: Add basic infrastructure for dealing with namespaces.
Eric W. Biederman [Tue, 30 Mar 2010 18:31:25 +0000]
kobj: Add basic infrastructure for dealing with namespaces.

Move complete knowledge of namespaces into the kobject layer
so we can use that information when reporting kobjects to
userspace.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agosysfs: Remove double free sysfs_get_sb
Eric W. Biederman [Tue, 30 Mar 2010 23:50:26 +0000]
sysfs: Remove double free sysfs_get_sb

Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agosysfs: Basic support for multiple super blocks
Eric W. Biederman [Tue, 30 Mar 2010 18:31:24 +0000]
sysfs: Basic support for multiple super blocks

Add all of the necessary bioler plate to support
multiple superblocks in sysfs.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agogenerate "change" uevent for loop device
David Zeuthen [Mon, 3 May 2010 12:08:59 +0000]
generate "change" uevent for loop device

Recent udev versions probe loop devices for filesystems meaning that
the /dev/disk hierarchy may contain useful entries such as

 $ ls -l /dev/disk/by-label/Fedora-12-x86_64-Live
 lrwxrwxrwx 1 root root 11 Mar 11 13:41 /dev/disk/by-label/Fedora-12-x86_64-Live -> ../../loop0

Unfortunately, no "change" uevent is generated when the loop device is
detached so the symlink persists. Additionally, no "change" uevent is
guaranteed to be generated when attaching an fd or changing capacity.
For example,  user space could open the loop device O_RDONLY (in fact,
recent util-linux-ng does this) so udev's OPTIONS+="watch" machinery may
not trigger the "change" uevent.

This patch ensures that the "change" uevent is generated in all of
these cases. As a result, the /dev/disk hierarchy works as expected
for loop devices.

Signed-off-by: David Zeuthen <davidz@redhat.com>
Acked-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoDriver core: Protect device shutdown from hot unplug events.
Hugh Daschbach [Mon, 22 Mar 2010 17:36:37 +0000]
Driver core: Protect device shutdown from hot unplug events.

While device_shutdown() walks through devices_kset to shutdown all
devices, device unplug events may race to shutdown individual devices.
Specifically, sd_shutdown(), on behalf of fc_starget_delete(), has
been observed deleting devices during device_shutdown()'s list
traversal.  So we factor out list_for_each_entry_safe_reverse(...) in
favor of while (!list_empty(...)).

Signed-off-by: Hugh Daschbach <hdasch@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agofirmware loader: do not allocate firmare id separately
Dmitry Torokhov [Sun, 14 Mar 2010 07:49:23 +0000]
firmware loader: do not allocate firmare id separately

fw_id has the same life time as firmware_priv so it makes sense to move
it into firmware_priv structure instead of allocating separately.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agofirmware loader: split out builtin firmware handling
Dmitry Torokhov [Sun, 14 Mar 2010 07:49:18 +0000]
firmware loader: split out builtin firmware handling

Split builtin firmware handling into separate functions to clean up the
main body of code.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agofirmware loader: rely on driver core to create class attribute
Dmitry Torokhov [Sun, 14 Mar 2010 07:49:13 +0000]
firmware loader: rely on driver core to create class attribute

Do not create 'timeout' attribute manually, let driver core do it for us.
This also ensures that attribute is cleaned up properly.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agofirmware class: export nowait to userspace
Johannes Berg [Mon, 29 Mar 2010 15:57:20 +0000]
firmware class: export nowait to userspace

When we use request_firmware_nowait(), userspace may
not want to answer negatively right away when for
example it is answering from an initrd only, but
with request_firmware() it has to in order to not
delay the kernel boot until the request times out.

This allows userspace to differentiate between the
two in order to be able to reply negatively to async
requests only when all filesystems have been mounted
and have been checked for the requested firmware file.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agolockdep: Add novalidate class for dev->mutex conversion
Peter Zijlstra [Fri, 19 Mar 2010 00:37:42 +0000]
lockdep: Add novalidate class for dev->mutex conversion

The conversion of device->sem to device->mutex resulted in lockdep
warnings. Create a novalidate class for now until the driver folks
come up with separate classes. That way we have at least the basic
mutex debugging coverage.

Add a checkpatch error so the usage is reserved for device->mutex.

[ tglx: checkpatch and compile fix for LOCKDEP=n ]

Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agodrivers/base: Convert dev->sem to mutex
Thomas Gleixner [Fri, 29 Jan 2010 20:39:02 +0000]
drivers/base: Convert dev->sem to mutex

The semaphore is semantically a mutex. Convert it to a real mutex and
fix up a few places where code was relying on semaphore.h to be included
by device.h, as well as the users of the trylock function, as that value
is now reversed.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoplatform_bus: allow custom extensions to system PM methods
Kevin Hilman [Wed, 17 Mar 2010 23:18:15 +0000]
platform_bus: allow custom extensions to system PM methods

When runtime PM for platform_bus was added, it allowed for platforms
to customize the runtime PM methods since they are defined as weak
symbols.

This patch allows platforms to also extend the system PM methods with
custom hooks so runtime PM and system PM extensions can be managed
together by custom platform-specific code.

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Cc: Magnus Damm <damm@opensource.se>
Cc: Rafael Wysocki <rjw@sisk.pl>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agodevtmpfs: support !CONFIG_TMPFS
Peter Korsgaard [Tue, 16 Mar 2010 20:55:21 +0000]
devtmpfs: support !CONFIG_TMPFS

Make devtmpfs available on (embedded) configurations without SHMEM/TMPFS,
using ramfs instead.

Saves ~15KB.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Acked-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agodriver core: module.c: Use kasprintf
Julia Lawall [Wed, 10 Mar 2010 21:18:13 +0000]
driver core: module.c: Use kasprintf

kasprintf combines kmalloc and sprintf, and takes care of the size
calculation itself.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression a,flag;
expression list args;
statement S;
@@

  a =
-  \(kmalloc\|kzalloc\)(...,flag)
+  kasprintf(flag,args)
  <... when != a
  if (a == NULL || ...) S
  ...>
- sprintf(a,args);
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoDriver core: don't initialize wakeup flags
Alan Stern [Mon, 8 Mar 2010 21:46:19 +0000]
Driver core: don't initialize wakeup flags

This patch (as1351) removes an unnecessary and unwanted assignment
from device_initialize().  The wakeup flags are set to 0 along with
everything else when the device structure is allocated, so we don't
need to do it again.  Furthermore, the subsystem might already have
set these flags to their correct values; we don't want to override it.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agodriver-core: fix potential race condition in drivers/base/dd.c
Stefani Seibold [Sat, 6 Mar 2010 16:50:14 +0000]
driver-core: fix potential race condition in drivers/base/dd.c

This patch fix a potential race condition in the driver_bound() function
in the file driver/base/dd.c.

The broadcast of the BUS_NOTIFY_BOUND_DRIVER notifier should be done
after adding the new device to the driver list. Otherwise notifier
listener will fail if they use functions like usb_find_interface().

The patch is against kernel 2.6.33. Please merge it.

Signed-off-by: Stefani Seibold <stefani@seibold.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoDriver core: Reduce the level of request_firmware() messages
Rafael J. Wysocki [Sat, 27 Feb 2010 20:43:22 +0000]
Driver core: Reduce the level of request_firmware() messages

The messages from _request_firmware() informing that firmware is
being requested or built-in firmware is going to be used are printed
at KERN_INFO, which produces lots of noise on systems with huge
numbers of AMD CPUs.  Reduce the level of these messages to
KERN_DEBUG to get rid of that noise.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agokref: remove kref_set
NeilBrown [Tue, 16 Mar 2010 04:14:51 +0000]
kref: remove kref_set

Of the three uses of kref_set in the kernel:

 One really should be kref_put as the code is letting go of a
    reference,
 Two really should be kref_init because the kref is being
    initialised.

This suggests that making kref_set available encourages bad code.
So fix the three uses and remove kref_set completely.

Signed-off-by: NeilBrown <neilb@suse.de>
Acked-by: Mimi Zohar <zohar@us.ibm.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agofirmware_class: fix memory leak - free allocated pages
David Woodhouse [Sun, 2 May 2010 08:21:21 +0000]
firmware_class: fix memory leak - free allocated pages

fix memory leak introduced by the patch 6e03a201bbe:
firmware: speed up request_firmware()

1. vfree won't release pages there were allocated explicitly and mapped
using vmap. The memory has to be vunmap-ed and the pages needs
to be freed explicitly

2. page array is moved into the 'struct
firmware' so that we can free it from release_firmware()
and not only in fw_dev_release()

The fix doesn't break the firmware load speed.

Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Ming Lei <tom.leiming@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Singed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agodrivers/base/cpu.c: fix the output from /sys/devices/system/cpu/offline
Jan Beulich [Tue, 27 Apr 2010 21:01:20 +0000]
drivers/base/cpu.c: fix the output from /sys/devices/system/cpu/offline

Without CONFIG_CPUMASK_OFFSTACK, simply inverting cpu_online_mask leads
to CPUs beyond nr_cpu_ids to be displayed twice and CPUs not even
possible to be displayed as offline.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoserial: Tidy REMOTE_DEBUG
Christoph Egger [Mon, 17 May 2010 15:25:54 +0000]
serial: Tidy REMOTE_DEBUG

REMOTE_DEBUG does already appear in 2.2 kernel sources but didn't
appear as a config Option in the initial git import 2.6.12-rc. It's
currently just used in one single place of the linux kernel and should
probably be dropped totally

Signed-off-by: Christoph Egger <siccegge@cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoserial: isicomm: handle running out of slots
Dan Carpenter [Fri, 7 May 2010 08:30:41 +0000]
serial: isicomm: handle running out of slots

This patch makes it return -ENODEV if we run out of empty slots in the
probe function.  It's unlikely to happen, but it makes the static
checkers happy.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoserial: bfin_sport_uart: Use resource size to fix off-by-one error
Tobias Klauser [Tue, 11 May 2010 07:10:23 +0000]
serial: bfin_sport_uart: Use resource size to fix off-by-one error

Use the resource_size function instead of manually calculating the
resource size. This actually fixes an off-by-one error.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agotty: fix obsolete comment on tty_insert_flip_string_fixed_flag
Johan Hovold [Fri, 7 May 2010 17:58:32 +0000]
tty: fix obsolete comment on tty_insert_flip_string_fixed_flag

Comment was not updated when tty_insert_flip_string was generalised.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoserial: Add driver for the Altera UART
Tobias Klauser [Wed, 5 May 2010 08:35:23 +0000]
serial: Add driver for the Altera UART

Add an UART driver for the UART component available as a SOPC (System on
Programmable Chip) component for Altera FPGAs.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoserial: Add driver for the Altera JTAG UART
Tobias Klauser [Wed, 5 May 2010 08:35:22 +0000]
serial: Add driver for the Altera JTAG UART

Add an UART driver for the JTAG UART component available as a SOPC
(System on Programmable Chip) component for Altera FPGAs.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoserial: timbuart: make sure last byte is sent when port is closed
Richard Röjfors [Tue, 27 Apr 2010 21:16:34 +0000]
serial: timbuart: make sure last byte is sent when port is closed

Fix a problem in early versions of the FPGA IP.

In certain situations the IP reports that the FIFO is empty, but a byte is
still clocked out.  If a flush is done at that point the currently clocked
byte is canceled.

This causes incompatibilities with the upper layers when a port is closed,
it waits until the FIFO is empty and then closes the port.  During close
the FIFO is flushed -> the last byte is not sent properly.

Now the FIFO is only flushed if it is reported to be non-empty.  Which
makes the currently clocked out byte to finish.

[akpm@linux-foundation.org: fix build]
Signed-off-by: Richard Röjfors <richard.rojfors@pelagicore.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoserial: two branches the same in timbuart_set_mctrl()
Roel Kluin [Tue, 27 Apr 2010 21:16:33 +0000]
serial: two branches the same in timbuart_set_mctrl()

CTS is a read only bit and we are to stop signal RTS if modem line
TIOCM_RTS is not set.

Thanks for suggestions by Richard Röjfors.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: Richard Röjfors <richard.rojfors@pelagicore.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoserial: uartlite: move from byte accesses to word accesses
John Linn [Wed, 7 Apr 2010 15:32:55 +0000]
serial: uartlite: move from byte accesses to word accesses

Byte accesses for I/O devices in Xilinx IP is going to be less
desired in the future such that the driver is being changed to
use 32 bit accesses.

This change facilitates using the uartlite IP over a PCIe bus
which only allows 32 bit accesses.

Signed-off-by: John Linn <john.linn@xilinx.com>
Tested-by: Michal Simek <monstr@monstr.eu>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agotty: n_gsm: depends on NET
Randy Dunlap [Mon, 3 May 2010 16:08:38 +0000]
tty: n_gsm: depends on NET

n_gsm uses skb functions, so it should depend on NET.

n_gsm.c:(.text+0x123d49): undefined reference to `skb_dequeue'
n_gsm.c:(.text+0x123d98): undefined reference to `kfree_skb'
n_gsm.c:(.text+0x123e1e): undefined reference to `skb_pull'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agotty: n_gsm line discipline
Alan Cox [Fri, 26 Mar 2010 11:32:54 +0000]
tty: n_gsm line discipline

Add an implementation of GSM 0710 MUX. The implementation currently supports

- Basic and advanced framing (as either end of the link)
- UI or UIH data frames
- Adaption layer 1-4 (1 and 2 via tty, 3 and 4 as skbuff lists)
- Modem and control messages including the correct retry process
- Flow control

and exposes the MUX channels as a set of virtual tty devices including modem
signals. This is an experimental driver.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoserial: TTY: new ldiscs for staging
Pavan Savoy [Thu, 8 Apr 2010 18:16:52 +0000]
serial: TTY: new ldiscs for staging

Push the max ldiscs by a few number to allow ldiscs
to exist in the staging directory and elsewhere.

Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoserial: bfin_sport_uart: drop redundant cpu depends
Mike Frysinger [Tue, 9 Mar 2010 17:25:40 +0000]
serial: bfin_sport_uart: drop redundant cpu depends

The BF54xM procs imply the related BF54x define, so no need to check both.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoserial: bfin_sport_uart: drop the experimental markings
Mike Frysinger [Tue, 9 Mar 2010 17:25:39 +0000]
serial: bfin_sport_uart: drop the experimental markings

Should be stable now ...

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoserial: bfin_sport_uart: pull in bfin_sport.h for SPORT defines
Mike Frysinger [Tue, 9 Mar 2010 17:25:38 +0000]
serial: bfin_sport_uart: pull in bfin_sport.h for SPORT defines

Now that the SPORT MMR defines have been unified, switch over to it.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoserial: bfin_sport_uart: only enable SPORT TX if data is to be sent
Sonic Zhang [Tue, 9 Mar 2010 17:25:37 +0000]
serial: bfin_sport_uart: only enable SPORT TX if data is to be sent

Rather than always turn on the SPORT TX interrupt, only do it when we've
actually queued up data for transmission.  This avoids useless interrupt
processing.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoserial: bfin_sport_uart: drop useless status masks
Mike Frysinger [Tue, 9 Mar 2010 17:25:36 +0000]
serial: bfin_sport_uart: drop useless status masks

These were all copied over from the Blackfin UART driver, but they don't
make sense here because these bits are all specific to the Blackfin UART.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoserial: bfin_sport_uart: zero sport_uart_port if allocated dynamically
Sonic Zhang [Tue, 9 Mar 2010 17:25:35 +0000]
serial: bfin_sport_uart: zero sport_uart_port if allocated dynamically

Need to initialize the SPORT state rather than using random memory.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoserial: bfin_sport_uart: protect changes to uart_port
Sonic Zhang [Tue, 9 Mar 2010 17:25:34 +0000]
serial: bfin_sport_uart: protect changes to uart_port

Common serial API says we need to grab the port lock before modifying
the port state to prevent inconsistent state between threads.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoserial: bfin_sport_uart: add support for CTS/RTS via GPIOs
Sonic Zhang [Tue, 9 Mar 2010 17:25:33 +0000]
serial: bfin_sport_uart: add support for CTS/RTS via GPIOs

Some people need flow control on their ports, so now boards can support
that via any GPIOs.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoserial: bfin_sport_uart: rename early platform driver class string
Sonic Zhang [Tue, 9 Mar 2010 17:25:32 +0000]
serial: bfin_sport_uart: rename early platform driver class string

Clarifies command line set up for devices between consoles and early
devices.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoserial: bfin_sport_uart: add missing mapbase initialization
Sonic Zhang [Tue, 9 Mar 2010 17:25:31 +0000]
serial: bfin_sport_uart: add missing mapbase initialization

The driver doesn't care about this, but the common serial core wants it.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoserial: bfin_sport_uart: remove unused peripheral pin lists
Sonic Zhang [Tue, 9 Mar 2010 17:25:30 +0000]
serial: bfin_sport_uart: remove unused peripheral pin lists

All the resources are in the boards files now.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoserial: bfin_sport_uart: shorten the SPORT TX waiting loop
Sonic Zhang [Tue, 9 Mar 2010 17:25:29 +0000]
serial: bfin_sport_uart: shorten the SPORT TX waiting loop

The waiting loop to stop SPORT TX from TX interrupt is too long.  This may
block the SPORT RX interrupts and cause the RX FIFO to overflow. So, do
stop sport TX only after the last char in TX FIFO is moved into the shift
register.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoserial: bfin_sport_uart: work around anomaly 05000473 (make 32bit fifo read atomic)
Sonic Zhang [Tue, 9 Mar 2010 17:25:28 +0000]
serial: bfin_sport_uart: work around anomaly 05000473 (make 32bit fifo read atomic)

We cannot let a 32-bit RX FIFO read be interrupted otherwise a fake RX
underflow error might be generated.

URL: http://blackfin.uclinux.org/gf/tracker/5145

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke...
Linus Torvalds [Fri, 21 May 2010 14:47:00 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/ryusuke/nilfs2

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2: (23 commits)
  nilfs2: disallow remount of snapshot from/to a regular mount
  nilfs2: use huge_encode_dev/huge_decode_dev
  nilfs2: update comment on deactivate_super at nilfs_get_sb
  nilfs2: replace MS_VERBOSE with MS_SILENT
  nilfs2: add missing initialization of s_mode
  nilfs2: fix misuse of open_bdev_exclusive/close_bdev_exclusive
  nilfs2: enlarge s_volume_name member in nilfs_super_block
  nilfs2: use checkpoint number instead of timestamp to select super block
  nilfs2: add missing endian conversion on super block magic number
  nilfs2: make nilfs_sc_*_ops static
  nilfs2: add kernel doc comments to persistent object allocator functions
  nilfs2: change sc_timer from a pointer to an embedded one in struct nilfs_sc_info
  nilfs2: remove nilfs_segctor_init() in segment.c
  nilfs2: insert checkpoint number in segment summary header
  nilfs2: add a print message after loading nilfs2
  nilfs2: cleanup multi kmem_cache_{create,destroy} code
  nilfs2: move out checksum routines to segment buffer code
  nilfs2: move pointer to super root block into logs
  nilfs2: change default of 'errors' mount option to 'remount-ro' mode
  nilfs2: Combine nilfs_btree_release_path() and nilfs_btree_free_path()
  ...

9 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw
Linus Torvalds [Fri, 21 May 2010 14:29:15 +0000]
Merge git://git./linux/kernel/git/steve/gfs2-2.6-nmw

* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw:
  GFS2: Fix typo
  GFS2: stuck in inode wait, no glocks stuck
  GFS2: Eliminate useless err variable
  GFS2: Fix writing to non-page aligned gfs2_quota structures
  GFS2: Add some useful messages
  GFS2: fix quota state reporting
  GFS2: Various gfs2_logd improvements
  GFS2: glock livelock
  GFS2: Clean up stuffed file copying
  GFS2: docs update
  GFS2: Remove space from slab cache name

9 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm
Linus Torvalds [Fri, 21 May 2010 14:28:02 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/teigland/dlm

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm:
  dlm: fix ast ordering for user locks
  dlm: cleanup remove unused code

9 years agoMerge git://git.infradead.org/mtd-2.6
Linus Torvalds [Fri, 21 May 2010 14:25:43 +0000]
Merge git://git.infradead.org/mtd-2.6

* git://git.infradead.org/mtd-2.6: (154 commits)
  mtd: cfi_cmdset_0002: use AMD standard command-set with Winbond flash chips
  mtd: cfi_cmdset_0002: Fix MODULE_ALIAS and linkage for new 0701 commandset ID
  mtd: mxc_nand: Remove duplicate NAND_CMD_RESET case value
  mtd: update gfp/slab.h includes
  jffs2: Stop triggering block erases from jffs2_write_super()
  jffs2: Rename jffs2_erase_pending_trigger() to jffs2_dirty_trigger()
  jffs2: Use jffs2_garbage_collect_trigger() to trigger pending erases
  jffs2: Require jffs2_garbage_collect_trigger() to be called with lock held
  jffs2: Wake GC thread when there are blocks to be erased
  jffs2: Erase pending blocks in GC pass, avoid invalid -EIO return
  jffs2: Add 'work_done' return value from jffs2_erase_pending_blocks()
  mtd: mtdchar: Do not corrupt backing device of device node inode
  mtd/maps/pcmciamtd: Fix printk format for ssize_t in debug messages
  drivers/mtd: Use kmemdup
  mtd: cfi_cmdset_0002: Fix argument order in bootloc warning
  mtd: nand: add Toshiba TC58NVG0 device ID
  pcmciamtd: add another ID
  pcmciamtd: coding style cleanups
  pcmciamtd: fixing obvious errors
  mtd: chips: add SST39WF160x NOR-flashes
  ...

Trivial conflicts due to dev_node removal in drivers/mtd/maps/pcmciamtd.c

9 years agoMerge branch 'linux-next' of git://git.infradead.org/ubi-2.6
Linus Torvalds [Fri, 21 May 2010 14:23:12 +0000]
Merge branch 'linux-next' of git://git.infradead.org/ubi-2.6

* 'linux-next' of git://git.infradead.org/ubi-2.6:
  UBI: misc comment fixes
  UBI: fix s/then/than/ typos
  UBI: init even if MTD device cannot be attached, if built into kernel
  UBI: remove reboot notifier

9 years agoMerge branch 'linux-next' of git://git.infradead.org/ubifs-2.6
Linus Torvalds [Fri, 21 May 2010 14:22:42 +0000]
Merge branch 'linux-next' of git://git.infradead.org/ubifs-2.6

* 'linux-next' of git://git.infradead.org/ubifs-2.6:
  UBIFS: mark VFS SB RO too

9 years agoMerge branch 'for-linus' of git://oss.sgi.com/xfs/xfs
Linus Torvalds [Fri, 21 May 2010 14:22:11 +0000]
Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfs

* 'for-linus' of git://oss.sgi.com/xfs/xfs: (54 commits)
  xfs: mark xfs_iomap_write_ helpers static
  xfs: clean up end index calculation in xfs_page_state_convert
  xfs: clean up mapping size calculation in __xfs_get_blocks
  xfs: clean up xfs_iomap_valid
  xfs: move I/O type flags into xfs_aops.c
  xfs: kill struct xfs_iomap
  xfs: report iomap_bn in block base
  xfs: report iomap_offset and iomap_bsize in block base
  xfs: remove iomap_delta
  xfs: remove iomap_target
  xfs: limit xfs_imap_to_bmap to a single mapping
  xfs: simplify buffer to transaction matching
  xfs: Make fiemap work in query mode.
  xfs: kill off l_sectbb_mask
  xfs: record log sector size rather than log2(that)
  xfs: remove dead XFS_LOUD_RECOVERY code
  xfs: removed unused XFS_QMOPT_ flags
  xfs: remove a few macro indirections in the quota code
  xfs: access quotainfo structure directly
  xfs: wait for direct I/O to complete in fsync and write_inode
  ...

9 years agoMerge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec...
Linus Torvalds [Fri, 21 May 2010 14:20:17 +0000]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/jlbec/ocfs2

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2: (47 commits)
  ocfs2: Silence a gcc warning.
  ocfs2: Don't retry xattr set in case value extension fails.
  ocfs2:dlm: avoid dlm->ast_lock lockres->spinlock dependency break
  ocfs2: Reset xattr value size after xa_cleanup_value_truncate().
  fs/ocfs2/dlm: Use kstrdup
  fs/ocfs2/dlm: Drop memory allocation cast
  Ocfs2: Optimize punching-hole code.
  Ocfs2: Make ocfs2_find_cpos_for_left_leaf() public.
  Ocfs2: Fix hole punching to correctly do CoW during cluster zeroing.
  Ocfs2: Optimize ocfs2 truncate to use ocfs2_remove_btree_range() instead.
  ocfs2: Block signals for mkdir/link/symlink/O_CREAT.
  ocfs2: Wrap signal blocking in void functions.
  ocfs2/dlm: Increase o2dlm lockres hash size
  ocfs2: Make ocfs2_extend_trans() really extend.
  ocfs2/trivial: Code cleanup for allocation reservation.
  ocfs2: make ocfs2_adjust_resv_from_alloc simple.
  ocfs2: Make nointr a default mount option
  ocfs2/dlm: Make o2dlm domain join/leave messages KERN_NOTICE
  o2net: log socket state changes
  ocfs2: print node # when tcp fails
  ...

9 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
Linus Torvalds [Fri, 21 May 2010 14:19:18 +0000]
Merge git://git./linux/kernel/git/jejb/scsi-misc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (182 commits)
  [SCSI] aacraid: add an ifdef'd device delete case instead of taking the device offline
  [SCSI] aacraid: prohibit access to array container space
  [SCSI] aacraid: add support for handling ATA pass-through commands.
  [SCSI] aacraid: expose physical devices for models with newer firmware
  [SCSI] aacraid: respond automatically to volumes added by config tool
  [SCSI] fcoe: fix fcoe module ref counting
  [SCSI] libfcoe: FIP Keep-Alive messages for VPorts are sent with incorrect port_id and wwn
  [SCSI] libfcoe: Fix incorrect MAC address clearing
  [SCSI] fcoe: fix a circular locking issue with rtnl and sysfs mutex
  [SCSI] libfc: Move the port_id into lport
  [SCSI] fcoe: move link speed checking into its own routine
  [SCSI] libfc: Remove extra pointer check
  [SCSI] libfc: Remove unused fc_get_host_port_type
  [SCSI] fcoe: fixes wrong error exit in fcoe_create
  [SCSI] libfc: set seq_id for incoming sequence
  [SCSI] qla2xxx: Updates to ISP82xx support.
  [SCSI] qla2xxx: Optionally disable target reset.
  [SCSI] qla2xxx: ensure flash operation and host reset via sg_reset are mutually exclusive
  [SCSI] qla2xxx: Silence bogus warning by gcc for wrap and did.
  [SCSI] qla2xxx: T10 DIF support added.
  ...

9 years agoHID: fix up 'EMBEDDED' mess in Kconfig
Jiri Kosina [Fri, 21 May 2010 11:15:17 +0000]
HID: fix up 'EMBEDDED' mess in Kconfig

The whole point of making some of the drivers automatically selected
unless 'EMBEDDED' was to handle quirks transparently after their separation
from the generic core.

Over time, some of the later-added quirks grew into more standalone drivers,
implementing non-trivial features a being larger than a few bytes of code.

In addition to that, some of the standalone drivers don't make sense for
99.9% of the users, as they are very specific to rare devices.

Therefore build by default in only those drivers which

- we historically used to support even before quirk separation from the
  core code
- are isolated enough and likely to hit quite large portion of the
  users anyway (Microsoft, Logitech)

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

9 years agopowerpc: Remove unused 'protect4gb' boot parameter
FUJITA Tomonori [Sun, 9 May 2010 17:39:05 +0000]
powerpc: Remove unused 'protect4gb' boot parameter

'protect4gb' boot parameter was introduced to avoid allocating dma
space acrossing 4GB boundary in 2007 (the commit
569975591c5530fdc9c7a3c45122e5e46f075a74).

In 2008, the IOMMU was fixed to use the boundary_mask parameter per
device properly. So 'protect4gb' workaround was removed (the
383af9525bb27f927511874f6306247ec13f1c28). But somehow I messed the
'protect4gb' boot parameter that was used to enable the
workaround.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>