13 years agoMerge branch 'tmp' into upstream
Jeff Garzik [Tue, 12 Sep 2006 15:45:33 +0000]
Merge branch 'tmp' into upstream

13 years ago[PATCH] Remove more unnecessary driver printk's
Andy Gospodarek [Mon, 11 Sep 2006 21:39:18 +0000]
[PATCH] Remove more unnecessary driver printk's

As I promised last week, here is the first pass at removing all
unnecessary printk's that exist in network device drivers currently in
promiscuous mode.  The duplicate messages are not needed so they have
been removed.  Some of these drivers are quite old and might not need an
update, but I did them all anyway.

I am currently auditing the remaining conditional printk's and will send
out a patch for those soon.

Signed-off-by: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

13 years agoMerge branch 'upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/linville...
Jeff Garzik [Tue, 12 Sep 2006 15:43:28 +0000]
Merge branch 'upstream' of git://git./linux/kernel/git/linville/wireless-2.6 into upstream

13 years agoMerge branch 'upstream-fixes' into upstream
Jeff Garzik [Tue, 12 Sep 2006 15:42:45 +0000]
Merge branch 'upstream-fixes' into upstream

13 years agoMerge branch 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/linvil...
Jeff Garzik [Tue, 12 Sep 2006 15:42:33 +0000]
Merge branch 'upstream-fixes' of git://git./linux/kernel/git/linville/wireless-2.6 into upstream-fixes

13 years ago[PATCH] hostap_cs: added support for Proxim Harmony PCI W-Lan card
Christian Steineck [Fri, 8 Sep 2006 21:51:34 +0000]
[PATCH] hostap_cs: added support for Proxim Harmony PCI W-Lan card

hostap_cs driver
- added support for Proxim Harmony PCI W-Lan Card (uses pd6729 based
pcmcia2pci bridge)

Signed-off-by: Christian Steineck <memphis@machzwo.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

13 years ago[PATCH] bcm43xx: remove dead code in bcm43xx_sysfs.c
Larry Finger [Thu, 7 Sep 2006 16:17:05 +0000]
[PATCH] bcm43xx: remove dead code in bcm43xx_sysfs.c

Coverity CID 1160 & 1161
Remove some dead code from bcm43xx_sysfs.c in 2.6.18-rc6

Signed-off-by: Darren Jenkins <darrenrjenkins@gmail.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

13 years ago[PATCH] bcm43xx: ucode debug status via sysfs
Larry Finger [Thu, 7 Sep 2006 15:12:11 +0000]
[PATCH] bcm43xx: ucode debug status via sysfs

This patch prints out the ucode debug status to sysfs. So, users can
watch the microcode status of their hardware.

Signed-off-by: Martin Langer <martin-langer@gmx.de>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

13 years ago[PATCH] bcm43xx: Add firmware version printout
Larry Finger [Mon, 4 Sep 2006 22:13:57 +0000]
[PATCH] bcm43xx: Add firmware version printout

This patch prints microcode revision, patchlevel, date and time to
KERN_INFO. Also, version 4.xx microcodes (rev>0x128) will be rejected
by the driver, because they still do not work.

Signed-off-by: Martin Langer <martin-langer@gmx.de>
Acked-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

13 years ago[PATCH] bcm43xx: remove dead statistics code
Larry Finger [Mon, 4 Sep 2006 04:38:56 +0000]
[PATCH] bcm43xx: remove dead statistics code

This patch removes code that was make obsolete when the wireless
statistics in bcm43xx-softmac were changed, but was overlooked at that
time. The value of bcm->stats.link_quality computed here is never used.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

13 years ago[PATCH] Prism54 : add bitrates to scan result
Jean Tourrilhes [Wed, 30 Aug 2006 01:19:23 +0000]
[PATCH] Prism54 : add bitrates to scan result

This patch adds bitrate information to the scan result in the Prism54
driver, like some/most other driver do.

Signed-off-by: Jean Tourrilhes <jt@hpl.hp.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

13 years ago[PATCH] zd1211rw: Removed unneeded packed attributes
Ulrich Kunitz [Tue, 29 Aug 2006 22:51:43 +0000]
[PATCH] zd1211rw: Removed unneeded packed attributes

Inspired by an e-mail by Stephen Hemminger I decided to remove all
unneeded packed attributes from the code where the member variables are
already aligned. This avoids horrible code being generated on some
architectures.

Signed-off-by: Ulrich Kunitz <kune@deine-taler.de>
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

13 years ago[PATCH] zd1211rw: Add ID for Asus WL-159g
Daniel Drake [Tue, 29 Aug 2006 22:49:53 +0000]
[PATCH] zd1211rw: Add ID for Asus WL-159g

Tested by Vincent TOUCHARD

zd1211 chip 0b05:170c v4802 high 00-11-d8 AL2230_RF pa0 g---

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

13 years ago[PATCH] zd1211rw: Add ID for Siemens Gigaset USB Stick 54
Daniel Drake [Tue, 29 Aug 2006 22:49:32 +0000]
[PATCH] zd1211rw: Add ID for Siemens Gigaset USB Stick 54

Tested by Martin Dummer.

zd1211 chip 0b3b:5630 v4330 high 00-01-e3 RF2959_RF pa0 ---

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

13 years ago[PATCH] bcm43xx: Correct out of sequence initialization step
Larry Finger [Mon, 11 Sep 2006 20:46:26 +0000]
[PATCH] bcm43xx: Correct out of sequence initialization step

This patch fixes an out of sequence step in the bcm43xx_init_board
routine for bcm43xx-softmac.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

13 years ago[PATCH] bcm43xx-softmac: Init, shutdown and restart fixes
Larry Finger [Mon, 21 Aug 2006 14:43:44 +0000]
[PATCH] bcm43xx-softmac: Init, shutdown and restart fixes

This fixes various bugs in the init and shutdown code
that would lead to lockups and crashes.

Signed-Off-By: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

13 years agoMerge branch 'upstream-fixes' into upstream
John W. Linville [Mon, 11 Sep 2006 20:40:03 +0000]
Merge branch 'upstream-fixes' into upstream

13 years ago[PATCH] zd1211rw: Fix of signal strength and quality measurement
Ulrich Kunitz [Tue, 29 Aug 2006 22:50:29 +0000]
[PATCH] zd1211rw: Fix of signal strength and quality measurement

Caused by a documentation issue I mixed up fields of the zd_status
structure. This patch fixes it and improves also the average
computation, which is now using only measurements of packets sent
by the access point.

Signed-off-by: Ulrich Kunitz <kune@deine-taler.de>
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

13 years agoMerge branch 'audit.b28' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit...
Linus Torvalds [Mon, 11 Sep 2006 18:43:17 +0000]
Merge branch 'audit.b28' of git://git./linux/kernel/git/viro/audit-current

* 'audit.b28' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current:
  [PATCH] audit: AUDIT_PERM support
  [PATCH] audit: more syscall classes added
  [PATCH] syscall classes hookup for ppc and s390
  [PATCH] update audit rule change messages
  [PATCH] sanity check audit_buffer
  [PATCH] fix ppid bug in 2.6.18 kernel

13 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6
Linus Torvalds [Mon, 11 Sep 2006 18:42:27 +0000]
Merge /pub/scm/linux/kernel/git/gregkh/usb-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  usbtouchscreen: fix ITM data reading
  USB: New device ID for ftdi_sio usb serial driver
  USB: Support for USB20SVGA-WH & USB20SVGA-DG
  USB: hid-core.c: fix duplicate USB_DEVICE_ID_GTCO_404

13 years agoMerge branch 'from-linus' into upstream
John W. Linville [Mon, 11 Sep 2006 18:08:41 +0000]
Merge branch 'from-linus' into upstream

13 years ago[PATCH] audit: AUDIT_PERM support
Al Viro [Thu, 31 Aug 2006 23:26:40 +0000]
[PATCH] audit: AUDIT_PERM support

add support for AUDIT_PERM predicate

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

13 years ago[PATCH] audit: more syscall classes added
Al Viro [Thu, 31 Aug 2006 23:05:56 +0000]
[PATCH] audit: more syscall classes added

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

13 years ago[PATCH] syscall classes hookup for ppc and s390
Al Viro [Thu, 31 Aug 2006 23:02:42 +0000]
[PATCH] syscall classes hookup for ppc and s390

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

13 years ago[PATCH] update audit rule change messages
Amy Griffis [Thu, 7 Sep 2006 21:46:18 +0000]
[PATCH] update audit rule change messages

Make the audit message for implicit rule removal more informative.
Make the rule update message consistent with other messages.

Signed-off-by: Amy Griffis <amy.griffis@hp.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

13 years ago[PATCH] sanity check audit_buffer
Amy Griffis [Thu, 7 Sep 2006 21:03:02 +0000]
[PATCH] sanity check audit_buffer

Add sanity checks for NULL audit_buffer consistent with other
audit_log* routines.

Signed-off-by: Amy Griffis <amy.griffis@hp.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

13 years ago[PATCH] fix ppid bug in 2.6.18 kernel
Steve Grubb [Sat, 26 Aug 2006 18:06:20 +0000]
[PATCH] fix ppid bug in 2.6.18 kernel

Hello,

During some troubleshooting, I found that ppid was accidentally omitted from
the legacy rule section. This resulted in EINVAL for any rule with ppid sent
with AUDIT_ADD.

Signed-off-by: Steve Grubb <sgrubb@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

13 years agoMerge master.kernel.org:/home/rmk/linux-2.6-mmc
Linus Torvalds [Mon, 11 Sep 2006 14:56:38 +0000]
Merge master.kernel.org:/home/rmk/linux-2.6-mmc

* master.kernel.org:/home/rmk/linux-2.6-mmc:
  [MMC] Always use a sector size of 512 bytes
  [MMC] Cleanup 385e3227d4d83ab13d7767c4bb3593b0256bf246
  [ARM] 3751/1: i.MX/MX1 SD/MMC use 512 bytes request for SCR read
  [MMC] Fix SD timeout calculation
  [MMC] constify mmc_host_ops

13 years agoMerge master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Mon, 11 Sep 2006 14:55:39 +0000]
Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] 3778/1: S3C24XX: remove changelogs from include/asm-arm/arch-s3c2410 [simtec]
  [ARM] 3783/1: S3C2412: fix IRQ_EINT0 to IRQ_EINT3 handling
  [ARM] 3779/1: S3C24XX: remove changelogs from include/asm-arm/arch-s3c2410 [left]
  [ARM] 3777/1: S3C24XX:  remove changelogs from include/asm-arm/arch-s3c2410 [regs-*.h]
  [ARM] 3776/1: S3C24XX: remove changelogs from include/asm-arm/arch-s3c2410
  [ARM] 3775/1: S3C24XX: do not add same sysdev_driver to two classes
  [ARM] 3774/1: S3C24XX: SMDK2413 has two machine IDs
  [ARM] 3773/1: Add the HWCAP_VFP bit for the ARM926 CPUs
  [ARM] 3772/1: Fix compilation error in mach-ixp4xx/nslu2*
  [ARM] 3767/1: S3C24XX: remove changelog comments from arch/arm/mach-s3c2410
  [ARM] 3766/1: Fix typo in ARM _raw_read_trylock

13 years agoMerge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik...
Linus Torvalds [Mon, 11 Sep 2006 14:54:45 +0000]
Merge branch 'upstream-linus' of /linux/kernel/git/jgarzik/netdev-2.6

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6:
  [PATCH] Fix dm9000 release_resource

13 years agoMerge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik...
Linus Torvalds [Mon, 11 Sep 2006 14:54:14 +0000]
Merge branch 'upstream-linus' of /linux/kernel/git/jgarzik/libata-dev

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  [PATCH] ata_piix: add map 01b for ICH7M
  [libata] sata_mv: errata check buglet fix

13 years ago[PATCH] Fix 2.6.18-rc6 IDE breakage, add missing ident needed for current VIA boards
Alan Cox [Mon, 11 Sep 2006 13:45:07 +0000]
[PATCH] Fix 2.6.18-rc6 IDE breakage, add missing ident needed for current VIA boards

There are two changes here.  The first reverses the broken PCI_DEVICE
conversion back to the old format.  The second adds a missing PCI ID so
you can actually boot 2.6.18 on 2 month old VIA motherboards (right now
only 2.6.18-mm works).

CC'd to Jeff to check the PCI ident but its a) in several distro kernels
and b) in 2.6.18-mm [twice ??]

Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

13 years agoMerge branch 'upstream-fixes' into upstream
Jeff Garzik [Mon, 11 Sep 2006 13:14:17 +0000]
Merge branch 'upstream-fixes' into upstream

13 years ago[PATCH] Fix dm9000 release_resource
Dirk Opfer [Wed, 6 Sep 2006 17:53:32 +0000]
[PATCH] Fix dm9000 release_resource

dm9000_release_board calls release_resource with the platform resource
instead of the requested resource:

db->addr_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
db->addr_req = request_mem_region(db->addr_res->start, i, pdev->name);

dm9000_release_board:

if (db->addr_res != NULL) {
release_resource(db->addr_res);
kfree(db->addr_req);

With this behavior the kernel will crash on the second removal. The
attached patch fix this problem.

Signed-off-by: Dirk Opfer <Dirk@Opfer-Online.de>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

13 years ago[PATCH] skge: check for PCI hotplug during IRQ
Stephen Hemminger [Wed, 6 Sep 2006 18:06:10 +0000]
[PATCH] skge: check for PCI hotplug during IRQ

Check if IRQ came from hardware fault (hotplug).

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

13 years ago[PATCH] cleanup unnecessary forcedeth printk
Andy Gospodarek [Fri, 8 Sep 2006 12:41:48 +0000]
[PATCH] cleanup unnecessary forcedeth printk

This removes unnecessary messages that show up every time I put my
ethernet card in promiscuous mode.  I'm already getting notification
from the networking layer, I don't need notification from the driver as
well.

There are probably other drivers that do this as well -- I'll look
around and see what I can find.

Signed-off-by: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

13 years ago[PATCH] Handle pci_enable_device() errors in resume
Valerie Henson [Fri, 8 Sep 2006 18:15:41 +0000]
[PATCH] Handle pci_enable_device() errors in resume

Signed-off-by: Valerie Henson <val_henson@linux.intel.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

13 years ago[PATCH] Use tulip.h in winbond-840.c
Grant Grundler [Fri, 8 Sep 2006 18:15:40 +0000]
[PATCH] Use tulip.h in winbond-840.c

Include "tulip.h" in winbond-840.c and clean up lots of redundant
definitions.

Signed-off-by: Grant Grundler <grundler@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
Signed-off-by: Valerie Henson <val_henson@linux.intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

13 years ago[PATCH] Clean up tulip.h
Grant Grundler [Fri, 8 Sep 2006 18:15:39 +0000]
[PATCH] Clean up tulip.h

Update/cleanup some definitions in tulip.h and tulip_core.c.

Signed-off-by: Grant Grundler <grundler@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
Signed-off-by: Valerie Henson <val_henson@linux.intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

13 years ago[PATCH] Defer tulip_select_media() to process context
Francois Romieu [Fri, 8 Sep 2006 18:15:38 +0000]
[PATCH] Defer tulip_select_media() to process context

Move tulip_select_media() processing to a workqueue, instead of
delaying in interrupt context, edited by Kyle McMartin to use kevent
thread, instead of creating its own workqueue.

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
Signed-off-by: Valerie Henson <val_henson@linux.intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

13 years ago[PATCH] Flush MMIO writes in reset sequence
Grant Grundler [Fri, 8 Sep 2006 18:15:37 +0000]
[PATCH] Flush MMIO writes in reset sequence

The obvious safe registers to read is one from PCI config space.

Signed-off-by: Grant Grundler <grundler@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
Signed-off-by: Valerie Henson <val_henson@linux.intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

13 years ago[PATCH] Make DS21143 printout match lspci output
Thibaut Varene [Fri, 8 Sep 2006 18:15:36 +0000]
[PATCH] Make DS21143 printout match lspci output

Signed-off-by: Thibaut Varene <varenet@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
Signed-off-by: Valerie Henson <val_henson@linux.intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

13 years ago[PATCH] Print physical address in tulip_init_one
Grant Grundler [Fri, 8 Sep 2006 18:15:35 +0000]
[PATCH] Print physical address in tulip_init_one

As the cookie returned by pci_iomap() is fairly useless...

[Compile warning on pci_resource_start() format fixed up by Valerie
Henson.]

Signed-off-by: Grant Grundler <grundler@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
Signed-off-by: Valerie Henson <val_henson@linux.intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

13 years ago[PATCH] Change tulip maintainer
Valerie Henson [Fri, 8 Sep 2006 18:15:34 +0000]
[PATCH] Change tulip maintainer

Signed-off-by: Valerie Henson <val_henson@linux.intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

 MAINTAINERS                    |    4 ++--
 drivers/net/tulip/21142.c      |    2 +-
 drivers/net/tulip/eeprom.c     |    2 +-
 drivers/net/tulip/interrupt.c  |    2 +-
 drivers/net/tulip/media.c      |    2 +-
 drivers/net/tulip/pnic.c       |    2 +-
 drivers/net/tulip/pnic2.c      |    2 +-
 drivers/net/tulip/timer.c      |    2 +-
 drivers/net/tulip/tulip_core.c |    2 +-
 9 files changed, 10 insertions(+), 10 deletions(-)

13 years agoMerge branch 'master' into upstream
Jeff Garzik [Mon, 11 Sep 2006 13:05:33 +0000]
Merge branch 'master' into upstream

13 years ago[PATCH] ata_piix: add map 01b for ICH7M
Tejun Heo [Sun, 10 Sep 2006 21:29:03 +0000]
[PATCH] ata_piix: add map 01b for ICH7M

Although the document says otherwise, some ich7m uses map 01b.  This
patch adds separate map DB for ICH7M and adds map entry for 01b.

This was spotted on an ASUS laptop by Jonathan Dieter.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Jonathan Dieter <jdieter@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

13 years ago[libata] sata_mv: errata check buglet fix
Andres Salomon [Mon, 11 Sep 2006 12:51:05 +0000]
[libata] sata_mv: errata check buglet fix

Fix a buglet; the errata check below this code is assuming the value in
the sstatus variable is what was pulled out of the SCR_STATUS register.
However, the status checks in the timeout loop clobber everything
but the first 4 bits of sstatus, so the errata checks are invalid.

This patch changes it to not clobber SStatus.

Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

13 years ago[ARM] 3778/1: S3C24XX: remove changelogs from include/asm-arm/arch-s3c2410 [simtec]
Ben Dooks [Sat, 9 Sep 2006 20:26:54 +0000]
[ARM] 3778/1: S3C24XX: remove changelogs from include/asm-arm/arch-s3c2410 [simtec]

Patch from Ben Dooks

Remove changelog entries from include/asm-arm/arch-s3c2410
for all simtec .h files  as these are irrelevant with
version control.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] 3783/1: S3C2412: fix IRQ_EINT0 to IRQ_EINT3 handling
Ben Dooks [Sat, 9 Sep 2006 20:24:13 +0000]
[ARM] 3783/1: S3C2412: fix IRQ_EINT0 to IRQ_EINT3 handling

Patch from Ben Dooks

The IRQ_EINT0 through IRQ_EINT3 handling has changed
on the S3C2412 from the previous SoCs in the range,
and thus we need to add code to handle this.

The changes come about due to these IRQs being
displayed in two different registers, and needing to
be acked and masked in both.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] 3779/1: S3C24XX: remove changelogs from include/asm-arm/arch-s3c2410 [left]
Ben Dooks [Sat, 9 Sep 2006 18:44:57 +0000]
[ARM] 3779/1: S3C24XX: remove changelogs from include/asm-arm/arch-s3c2410 [left]

Patch from Ben Dooks

Remove the last of the hangelogs from
include/asm-arm/arch-s3c2410, as this information
is available from the revision control system

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] 3777/1: S3C24XX: remove changelogs from include/asm-arm/arch-s3c2410 [regs...
Ben Dooks [Sat, 9 Sep 2006 18:44:54 +0000]
[ARM] 3777/1: S3C24XX:  remove changelogs from include/asm-arm/arch-s3c2410 [regs-*.h]

Patch from Ben Dooks

Remove changelog entries from include/asm-arm/arch-s3c2410
for all regs-*.h as these are irrelevant with version control

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] 3776/1: S3C24XX: remove changelogs from include/asm-arm/arch-s3c2410
Ben Dooks [Sat, 9 Sep 2006 18:44:52 +0000]
[ARM] 3776/1: S3C24XX: remove changelogs from include/asm-arm/arch-s3c2410

Patch from Ben Dooks

Remove changelog entries from include/asm-arm/arch-s3c2410
as these are irrelevant with version control

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] 3775/1: S3C24XX: do not add same sysdev_driver to two classes
Ben Dooks [Sat, 9 Sep 2006 18:44:50 +0000]
[ARM] 3775/1: S3C24XX: do not add same sysdev_driver to two classes

Patch from Ben Dooks

The s3c244x-irq.c code makes the mistake of adding
the same drive to two different sys-classes. This
causes the class lists to become corrupted and the
suspend code to OOPS.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[IA64] SN fix for cpu hotplug/kexec
Jack Steiner [Thu, 31 Aug 2006 16:35:57 +0000]
[IA64] SN fix for cpu hotplug/kexec

The sn_cpu_init() is required for cpu initialization on SN platforms.
Change __init to __cpuinit so that the function is not freed with init code/data.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

13 years ago[IA64] Save register stack contents on cpu start
Jack Steiner [Thu, 31 Aug 2006 16:34:47 +0000]
[IA64] Save register stack contents on cpu start

The SN PROM uses the register stack in the slave loop. The contents
must be preserved for the OS to return to the slave loop via offlining
a cpu or for kexec. A 'flushrs" is needed to force the stack to be written
to memory prior to changing bspstore.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

13 years ago[IA64] Unwire set/get_robust_list
Andreas Schwab [Mon, 4 Sep 2006 19:56:09 +0000]
[IA64] Unwire set/get_robust_list

The syscalls set/get_robust_list must not be wired up until
futex_atomic_cmpxchg_inatomic is implemented.  Otherwise the kernel will
hang in handle_futex_death.

Signed-off-by: Andreas Schwab <schwab@suse.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>

13 years ago[IA64] correct file descriptor reference counting in perfmon
Stephane Eranian [Fri, 25 Aug 2006 21:00:19 +0000]
[IA64] correct file descriptor reference counting in perfmon

Fix a bug in sys_perfmonctl() whereby it was not correctly
decrementing the file descriptor reference count.

Signed-off-by: stephane eranian <eranian@hpl.hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

13 years ago[PATCH] NFS: large non-page-aligned direct I/O clobbers memory
Trond Myklebust [Fri, 8 Sep 2006 16:48:54 +0000]
[PATCH] NFS: large non-page-aligned direct I/O clobbers memory

The logic in nfs_direct_read_schedule and nfs_direct_write_schedule can
allow data->npages to be one larger than rpages.  This causes a page
pointer to be written beyond the end of the pagevec in nfs_read_data (or
nfs_write_data).

Fix this by making nfs_(read|write)_alloc() calculate the size of the
pagevec array, and initialise data->npages.

Also get rid of the redundant argument to nfs_commit_alloc().

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

13 years ago[PATCH] invalidate_complete_page() race fix
Andrew Morton [Fri, 8 Sep 2006 16:48:38 +0000]
[PATCH] invalidate_complete_page() race fix

If a CPU faults this page into pagetables after invalidate_mapping_pages()
checked page_mapped(), invalidate_complete_page() will still proceed to remove
the page from pagecache.  This leaves the page-faulting process with a
detached page.  If it was MAP_SHARED then file data loss will ensue.

Fix that up by checking the page's refcount after taking tree_lock.

Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

13 years ago[PATCH] ext3_getblk() should handle HOLE correctly
Badari Pulavarty [Fri, 8 Sep 2006 16:48:21 +0000]
[PATCH] ext3_getblk() should handle HOLE correctly

It has been reported that ext3_getblk() is not doing the right thing and
triggering following WARN():

BUG: warning at fs/ext3/inode.c:1016/ext3_getblk()
 <c01c5140> ext3_getblk+0x98/0x2a6  <c03b2806> md_wakeup_thread+0x26/0x2a
 <c01c536d> ext3_bread+0x1f/0x88  <c01cedf9> ext3_quota_read+0x136/0x1ae
 <c018b683> v1_read_dqblk+0x61/0xac  <c0188f32> dquot_acquire+0xf6/0x107
 <c01ceaba> ext3_acquire_dquot+0x46/0x68  <c01897d4> dqget+0x155/0x1e7
 <c018a97b> dquot_transfer+0x3e0/0x3e9  <c016fe52> dput+0x23/0x13e
 <c01c7986> ext3_setattr+0xc3/0x240  <c0120f66> current_fs_time+0x52/0x6a
 <c017320e> notify_change+0x2bd/0x30d  <c0159246> chown_common+0x9c/0xc5
 <c02a222c> strncpy_from_user+0x3b/0x68  <c0167fe6> do_path_lookup+0xdf/0x266
 <c016841b> __user_walk_fd+0x44/0x5a  <c01592b9> sys_chown+0x4a/0x55
 <c015a43c> vfs_write+0xe7/0x13c  <c01695d4> sys_mkdir+0x1f/0x23
 <c0102a97> syscall_call+0x7/0xb

Looking at the code, it looks like it's not handle HOLE correctly.  It ends
up returning -EIO.  Here is the patch to fix it.

If we really want to be paranoid, we can allow return values 0 (HOLE), 1
(we asked for one block) and return -EIO for more than 1 block.  But I
really don't see a reason for doing it - all we need is the block# here.
(doesn't matter how many blocks are mapped).

ext3_get_blocks_handle() returns number of blocks it mapped.  It returns 0
in case of HOLE.  ext3_getblk() should handle HOLE properly (currently its
dumping warning stack and returning -EIO).

Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Acked-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

13 years ago[PATCH] sis5513: add SiS south bridge ID 0x966 and 0x968
David Wang [Fri, 8 Sep 2006 16:47:51 +0000]
[PATCH] sis5513: add SiS south bridge ID 0x966 and 0x968

New SiS south bridge device ID is 0x966.

Next coming product will be 0x968. (Will be released in Q4, this year)

We don't make any updates to the IDE controller.

Signed-off-by: David Wang <touch@sis.com>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

13 years ago[PATCH] sh: fix FPN_START typo
Alexey Dobriyan [Fri, 8 Sep 2006 16:47:34 +0000]
[PATCH] sh: fix FPN_START typo

Not that it passes allmodconfig without it...

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp>
Cc: Mark Haverkamp <markh@osdl.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

13 years ago[PATCH] optical /proc/ide/*/media
Alexey Dobriyan [Fri, 8 Sep 2006 16:47:24 +0000]
[PATCH] optical /proc/ide/*/media

Sergey Vlasov reported that his "FUJITSU MCC3064AP, ATAPI OPTICAL drive"
pops up as UNKNOWN in /proc/ide/*/media .

Closes #4145.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

13 years ago[PATCH] Use the correct restart option for futex_lock_pi
Thomas Gleixner [Fri, 8 Sep 2006 16:47:15 +0000]
[PATCH] Use the correct restart option for futex_lock_pi

The current implementation of futex_lock_pi returns -ERESTART_RESTARTBLOCK
in case that the lock operation has been interrupted by a signal.  This
results in a return of -EINTR to userspace in case there is an handler for
the signal.  This is wrong, because userspace expects that the lock
function does not return in any case of signal delivery.

This was not caught by my insufficient test case, but triggered a nasty
userspace problem in an high load application scenario.  Unfortunately also
glibc does not check for this invalid return value.

Using -ERSTARTNOINTR makes sure, that the interrupted syscall is restarted.
 The restart block related code can be safely removed, as the possible
timeout argument is an absolute time value.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

13 years ago[PATCH] IA64,sparc: local DoS with corrupted ELFs
Kirill Korotaev [Thu, 7 Sep 2006 10:17:04 +0000]
[PATCH] IA64,sparc: local DoS with corrupted ELFs

This prevents cross-region mappings on IA64 and SPARC which could lead
to system crash.  They were correctly trapped for normal mmap() calls,
but not for the kernel internal calls generated by executable loading.

This code just moves the architecture-specific cross-region checks into
an arch-specific "arch_mmap_check()" macro, and defines that for the
architectures that needed it (ia64, sparc and sparc64).

Architectures that don't have any special requirements can just ignore
the new cross-region check, since the mmap() code will just notice on
its own when the macro isn't defined.

Signed-off-by: Pavel Emelianov <xemul@openvz.org>
Signed-off-by: Kirill Korotaev <dev@openvz.org>
Acked-by: David Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
[ Cleaned up to not affect architectures that don't need it ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

13 years agousbtouchscreen: fix ITM data reading
Kai Lindhom [Thu, 7 Sep 2006 19:25:51 +0000]
usbtouchscreen: fix ITM data reading

From: Kai Lindhom <megantti@gmail.com>
Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years agoUSB: New device ID for ftdi_sio usb serial driver
Ralf Schlatterbeck [Wed, 6 Sep 2006 10:15:02 +0000]
USB: New device ID for ftdi_sio usb serial driver

The patch adds a new device ID for the Gamma Scout Geiger counter
device.

Signed-off-by: Ralf Schlatterbeck <rsc@runtux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years agoUSB: Support for USB20SVGA-WH & USB20SVGA-DG
Nobuhiro Iwamatsu [Fri, 1 Sep 2006 02:32:28 +0000]
USB: Support for USB20SVGA-WH & USB20SVGA-DG

This patch is support USB20SVGA-WH & USB20SVGA-DG of the sisusb device.
As for this device, Device ID is different according to the color of the
product.  A blue device is supported. However, a green, white device is
not supported.

http://www.lubic.jp/uv_method.html ( Japanese only ) .

Green, white USB20SVGA comes to work by applying the patch .
And, it  be able to use three USB20SVGA( Blue , Green , White ).

Signed-off-by: Nobuhiro Iwamatsu <hemamu@t-base.ne.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years agoUSB: hid-core.c: fix duplicate USB_DEVICE_ID_GTCO_404
Adrian Bunk [Mon, 4 Sep 2006 11:41:10 +0000]
USB: hid-core.c: fix duplicate USB_DEVICE_ID_GTCO_404

On Fri, Sep 01, 2006 at 01:58:18AM -0700, Andrew Morton wrote:
>...
> Changes since 2.6.18-rc4-mm3:
>...
> +gregkh-usb-hid-core.c-adds-all-gtco-calcomp-digitizers-and-interwrite-school-products-to-blacklist.patch
>...
>  USB tree updates.
>...

The GNU C compiler spotted the following bug:

<--  snip  -->

...
CC drivers/usb/input/hid-core.o
/home/bunk/linux/kernel-2.6/linux-2.6.18-rc5-mm1/drivers/usb/input/hid-core.c:1446:1: warning: "USB_DEVICE_ID_GTCO_404" redefined
/home/bunk/linux/kernel-2.6/linux-2.6.18-rc5-mm1/drivers/usb/input/hid-core.c:1445:1: warning: this is the location of the previous definition
...

<--  snip  -->

This patch fixes this cut'n'paste error.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[MMC] Always use a sector size of 512 bytes
Pierre Ossman [Thu, 7 Sep 2006 15:01:30 +0000]
[MMC] Always use a sector size of 512 bytes

Both MMC and SD specifications specify (although a bit unclearly in
the MMC case) that a sector size of 512 bytes must always be
supported by the card.

Cards can report larger "native" size than this, and cards >= 2 GB
even must do so. Most other readers use 512 bytes even for these
cards. We should do the same to be compatible.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[MMC] Cleanup 385e3227d4d83ab13d7767c4bb3593b0256bf246
Russell King [Thu, 7 Sep 2006 14:57:12 +0000]
[MMC] Cleanup 385e3227d4d83ab13d7767c4bb3593b0256bf246

Rather than having two places which independently calculate the
timeout for data transfers, make it a library function instead.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Pierre Ossman <drzeus@drzeus.cx>

13 years ago[ARM] 3751/1: i.MX/MX1 SD/MMC use 512 bytes request for SCR read
Pavel Pisa [Thu, 7 Sep 2006 14:53:29 +0000]
[ARM] 3751/1: i.MX/MX1 SD/MMC use 512 bytes request for SCR read

Patch from Pavel Pisa

This is another approach to SDHC deficiency workaround.
It seems, that previous solution based on 16 bytes (FIFO length size)
read is still timing sensitive on genirq and fully preemptive kernels.
The new solution is backuped by M9328 UM statement, that only 512 byte
block are working properly and by 2.4.26 FreeScale's SDHC code.

Jay Monkman reports significant improvement on code based
on this driver after applying this change on MX21 as well.

Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[MMC] Fix SD timeout calculation
Pierre Ossman [Sun, 18 Jun 2006 12:34:37 +0000]
[MMC] Fix SD timeout calculation

Secure Digital cards use a different algorithm to calculate the timeout
for data transfers. Using the MMC one works often, but not always.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[MMC] constify mmc_host_ops
David Brownell [Sun, 3 Sep 2006 13:43:33 +0000]
[MMC] constify mmc_host_ops

Let drivers constify MMC host method operations tables,
moving them from ".data" to ".rodata".

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] 3774/1: S3C24XX: SMDK2413 has two machine IDs
Ben Dooks [Wed, 6 Sep 2006 18:03:31 +0000]
[ARM] 3774/1: S3C24XX: SMDK2413 has two machine IDs

Patch from Ben Dooks

It turns out we have both SMDK2413 and S3C2413 for
the same board.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] 3773/1: Add the HWCAP_VFP bit for the ARM926 CPUs
Catalin Marinas [Wed, 6 Sep 2006 18:03:28 +0000]
[ARM] 3773/1: Add the HWCAP_VFP bit for the ARM926 CPUs

Patch from Catalin Marinas

The ARM926EJ-S CPU has the VFP coprocessor and therefore it should be shown
in the /proc/cpuinfo if CONFIG_VFP is enabled.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] 3772/1: Fix compilation error in mach-ixp4xx/nslu2*
Martin Michlmayr [Wed, 6 Sep 2006 18:03:24 +0000]
[ARM] 3772/1: Fix compilation error in mach-ixp4xx/nslu2*

Patch from Martin Michlmayr

Include linux/irq.h in the nslu2 code in order to avoid the following
compiler error:

CC arch/arm/mach-ixp4xx/nslu2-power.o
arch/arm/mach-ixp4xx/nslu2-power.c: In function 'nslu2_power_init':
arch/arm/mach-ixp4xx/nslu2-power.c:53: warning: implicit declaration of function 'set_irq_type'
arch/arm/mach-ixp4xx/nslu2-power.c:53: error: 'IRQ_TYPE_LEVEL_LOW' undeclared (first use in this function)
arch/arm/mach-ixp4xx/nslu2-power.c:53: error: (Each undeclared identifier is reported only once
arch/arm/mach-ixp4xx/nslu2-power.c:53: error: for each function it appears in.)
arch/arm/mach-ixp4xx/nslu2-power.c:54: error: 'IRQ_TYPE_LEVEL_HIGH' undeclared (first use in this function)
make[5]: *** [arch/arm/mach-ixp4xx/nslu2-power.o] Error 1

Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] 3767/1: S3C24XX: remove changelog comments from arch/arm/mach-s3c2410
Ben Dooks [Wed, 6 Sep 2006 18:03:21 +0000]
[ARM] 3767/1: S3C24XX: remove changelog comments from arch/arm/mach-s3c2410

Patch from Ben Dooks

Remove the pointless changelog comments from
arch/arm/mach-s3c2410 files, as all this can
be found from the revision control system.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] 3766/1: Fix typo in ARM _raw_read_trylock
Catalin Marinas [Wed, 6 Sep 2006 18:03:14 +0000]
[ARM] 3766/1: Fix typo in ARM _raw_read_trylock

Patch from Catalin Marinas

A comma was missing between tmp and tmp2.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years agoMerge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik...
Linus Torvalds [Wed, 6 Sep 2006 18:00:59 +0000]
Merge branch 'upstream-linus' of /linux/kernel/git/jgarzik/netdev-2.6

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6:
  [PATCH] myri10ge: update the firmware download URL in Kconfig

13 years ago[PATCH] FRV: Use the generic time stuff for FRV
john stultz [Wed, 6 Sep 2006 10:02:45 +0000]
[PATCH] FRV: Use the generic time stuff for FRV

Use the generic time stuff for FRV.

Signed-off-by: John Stultz <johnstul@us.ibm.com>
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

13 years ago[PATCH] Remove unneeded asm-i386/cpufeature.h from user visibility.
David Woodhouse [Wed, 6 Sep 2006 16:03:26 +0000]
[PATCH] Remove unneeded asm-i386/cpufeature.h from user visibility.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

13 years ago[PATCH] Move linux/device.h include in linux/atmdev.h to #ifdef __KERNEL__ section
Ismail Donmez [Wed, 6 Sep 2006 07:03:44 +0000]
[PATCH] Move linux/device.h include in linux/atmdev.h to #ifdef __KERNEL__ section

linux/device.h header is not included in the David Woodhouse's
kernel-headers git tree which is used for userspace kernel headers.  Which
results in compile errors when building iproute2.  Attached patch moves
linux/device.h include under the #ifdef __KERNEL__ section.

Signed-off-by: Ismail Donmez <ismail@pardus.org.tr>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

13 years ago[PATCH] lockdep: do not touch console state when tainting the kernel
Ingo Molnar [Wed, 6 Sep 2006 07:03:44 +0000]
[PATCH] lockdep: do not touch console state when tainting the kernel

Remove an unintended console_verbose() side-effect from add_taint().

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

13 years ago[PATCH] prevent swsusp with PAE
Pavel Machek [Wed, 6 Sep 2006 07:03:43 +0000]
[PATCH] prevent swsusp with PAE

PAE + swsusp results in hard-to-debug crash about 50% of time during
resume.  Cause is known, fix needs to be ported from x86-64 (but we can't
make it to 2.6.18, and I'd like this to be worked around in 2.6.18).

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

13 years ago[PATCH] prevent timespec/timeval to ktime_t overflow
Thomas Gleixner [Wed, 6 Sep 2006 07:03:42 +0000]
[PATCH] prevent timespec/timeval to ktime_t overflow

Frank v.  Waveren pointed out that on 64bit machines the timespec to
ktime_t conversion might overflow.  This is also true for timeval to
ktime_t conversions.  This breaks a "sleep inf" on 64bit machines.

While a timespec/timeval with tx.sec = MAX_LONG is valid by specification
the internal representation of ktime_t is based on nanoseconds.  The
conversion of seconds to nanoseconds overflows for seconds values >=
(MAX_LONG / NSEC_PER_SEC).

Check the seconds argument to the conversion and limit it to the maximum
time which can be represented by ktime_t.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Frank v Waveren <fvw@var.cx>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

13 years ago[PATCH] add missing desctiption in super.c
Henrik Kretzschmar [Wed, 6 Sep 2006 07:03:41 +0000]
[PATCH] add missing desctiption in super.c

Adds kernel-doc for alloc_super() type in fs/super.c.

Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

13 years ago[PATCH] Documentation for lock_key in struct hrtimer_base
Henrik Kretzschmar [Wed, 6 Sep 2006 07:03:40 +0000]
[PATCH] Documentation for lock_key in struct hrtimer_base

Fixes an error message on make xmldocs.

Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

13 years ago[PATCH] lockdep ifdef fix
Jarek Poplawski [Wed, 6 Sep 2006 07:03:39 +0000]
[PATCH] lockdep ifdef fix

With

CONFIG_SMP=y
CONFIG_PREEMPT=y
CONFIG_LOCKDEP=y
CONFIG_DEBUG_LOCK_ALLOC=y
# CONFIG_PROVE_LOCKING is not set

spin_unlock_irqrestore() goes through lockdep but spin_lock_irqsave() doesn't.
Apparently, bad things happen.

Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

13 years ago[PATCH] make drivers/net/e1000/e1000_hw.c:e1000_phy_igp_get_info() static
Adrian Bunk [Mon, 4 Sep 2006 11:41:14 +0000]
[PATCH] make drivers/net/e1000/e1000_hw.c:e1000_phy_igp_get_info() static

This patch makes the needlessly global e1000_phy_igp_get_info() static.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

13 years ago[PATCH] skge: version 1.8
Stephen Hemminger [Fri, 1 Sep 2006 22:53:50 +0000]
[PATCH] skge: version 1.8

Because of the NAPI and other SMP fixes, let's call
this a version.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

13 years ago[PATCH] skge: use NAPI for transmit complete
Stephen Hemminger [Fri, 1 Sep 2006 22:53:49 +0000]
[PATCH] skge: use NAPI for transmit complete

The skge driver has much better performance if transmit done is handled in
NAPI softirq. Change from doing transmit locking in driver (LLTX) and
use device lock.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

13 years ago[PATCH] skge: irq lock race
Stephen Hemminger [Fri, 1 Sep 2006 22:53:48 +0000]
[PATCH] skge: irq lock race

The driver needs to access the IRQ status inside of lock to avoid
races with other places changing IRQ mask etc. This may be related
to some of the SMP bugs reported against skge in kernel bugzilla.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

13 years ago[PATCH] skge: use netdev_alloc_skb
Stephen Hemminger [Fri, 1 Sep 2006 22:53:47 +0000]
[PATCH] skge: use netdev_alloc_skb

Change to use new netdev_alloc_skb interface for 2.6.18.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

13 years ago[PATCH] sky2: more pci device id's
Stephen Hemminger [Fri, 1 Sep 2006 21:52:04 +0000]
[PATCH] sky2: more pci device id's

Some more Marvell device id's, these are from the latest SysKonnect
vendor driver version of sk98lin (8.36).

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

13 years ago[PATCH] myri10ge: improve firmware selection
Brice Goglin [Thu, 31 Aug 2006 05:32:59 +0000]
[PATCH] myri10ge: improve firmware selection

Improve the firmware selection by adding 2 cases where we should use the
optimized firmware:
* when the actual PCIe link width is lower than 8x.
* when the board is plugged to one of the new Intel PCIe chipsets that
  are known to provide aligned PCIe completions.

The patch actually raises two concerns:
* We might want to add a generic PCI function to get the PCIe link width since
  some other drivers (at least ipath) do the same. But we probably do not want
  to add a new function for every PCIe capability. I will probably look at it
  and discuss it on linux-pci in the future.
* As requested during the submission, the PCI ids of chipsets that are known to
  provided aligned completion are defined in the myri10ge code. If we keep adding
  new ones, it might become better to move them to pciids.h.
  But, this sort of quirk to detect these chipsets are very specific to our NIC,
  I don't think it is worth moving it to the PCI core until somebody else really
  needs it.

Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

13 years agoMerge branch 'upstream-fixes' into upstream
Jeff Garzik [Wed, 6 Sep 2006 15:06:44 +0000]
Merge branch 'upstream-fixes' into upstream

13 years ago[PATCH] myri10ge: update the firmware download URL in Kconfig
Brice Goglin [Wed, 6 Sep 2006 01:58:50 +0000]
[PATCH] myri10ge: update the firmware download URL in Kconfig

Update the firmware download URL in Kconfig to match the header
in drivers/net/myri10ge/myri10ge.c.

Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

13 years agoMerge branch 'upstream' of master.kernel.org:/pub/scm/linux/kernel/git/linville/wirel...
Jeff Garzik [Wed, 6 Sep 2006 15:02:22 +0000]
Merge branch 'upstream' of /linux/kernel/git/linville/wireless-2.6 into upstream

13 years ago[PATCH] forcedeth: decouple vlan and rx checksum dependency
Ayaz Abdulla [Thu, 24 Aug 2006 21:35:41 +0000]
[PATCH] forcedeth: decouple vlan and rx checksum dependency

This patch decouples the dependency between the rx checksum feature and
vlan feature. This is done by ignoring the checksum information if the
user has disabled rx checksum when vlan is enabled.

Signed-Off-By: Ayaz Abdulla <aabdulla@nvidia.com>

Signed-off-by: Jeff Garzik <jeff@garzik.org>