6 years agoUBIFS: fix a horrid bug
Artem Bityutskiy [Fri, 28 Jun 2013 11:15:15 +0000]
UBIFS: fix a horrid bug

commit 605c912bb843c024b1ed173dc427cd5c08e5d54d upstream.

Al Viro pointed me to the fact that '->readdir()' and '->llseek()' have no
mutual exclusion, which means the 'ubifs_dir_llseek()' can be run while we are
in the middle of 'ubifs_readdir()'.

This means that 'file->private_data' can be freed while 'ubifs_readdir()' uses
it, and this is a very bad bug: not only 'ubifs_readdir()' can return garbage,
but this may corrupt memory and lead to all kinds of problems like crashes an
security holes.

This patch fixes the problem by using the 'file->f_version' field, which
'->llseek()' always unconditionally sets to zero. We set it to 1 in
'ubifs_readdir()' and whenever we detect that it became 0, we know there was a
seek and it is time to clear the state saved in 'file->private_data'.

I tested this patch by writing a user-space program which runds readdir and
seek in parallell. I could easily crash the kernel without these patches, but
could not crash it with these patches.

Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Tested-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoUBIFS: prepare to fix a horrid bug
Artem Bityutskiy [Fri, 28 Jun 2013 11:15:14 +0000]
UBIFS: prepare to fix a horrid bug

commit 33f1a63ae84dfd9ad298cf275b8f1887043ced36 upstream.

Al Viro pointed me to the fact that '->readdir()' and '->llseek()' have no
mutual exclusion, which means the 'ubifs_dir_llseek()' can be run while we are
in the middle of 'ubifs_readdir()'.

First of all, this means that 'file->private_data' can be freed while
'ubifs_readdir()' uses it.  But this particular patch does not fix the problem.
This patch is only a preparation, and the fix will follow next.

In this patch we make 'ubifs_readdir()' stop using 'file->f_pos' directly,
because 'file->f_pos' can be changed by '->llseek()' at any point. This may
lead 'ubifs_readdir()' to returning inconsistent data: directory entry names
may correspond to incorrect file positions.

So here we introduce a local variable 'pos', read 'file->f_pose' once at very
the beginning, and then stick to 'pos'. The result of this is that when
'ubifs_dir_llseek()' changes 'file->f_pos' while we are in the middle of
'ubifs_readdir()', the latter "wins".

Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Tested-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoperf: Disable monitoring on setuid processes for regular users
Stephane Eranian [Thu, 20 Jun 2013 09:36:28 +0000]
perf: Disable monitoring on setuid processes for regular users

commit 2976b10f05bd7f6dab9f9e7524451ddfed656a89 upstream.

There was a a bug in setup_new_exec(), whereby
the test to disabled perf monitoring was not
correct because the new credentials for the
process were not yet committed and therefore
the get_dumpable() test was never firing.

The patch fixes the problem by moving the
perf_event test until after the credentials
are committed.

Signed-off-by: Stephane Eranian <eranian@google.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agodlci: validate the net device in dlci_del()
Zefan Li [Wed, 26 Jun 2013 07:31:58 +0000]
dlci: validate the net device in dlci_del()

commit 578a1310f2592ba90c5674bca21c1dbd1adf3f0a upstream.

We triggered an oops while running trinity with 3.4 kernel:

BUG: unable to handle kernel paging request at 0000000100000d07
IP: [<ffffffffa0109738>] dlci_ioctl+0xd8/0x2d4 [dlci]
PGD 640c0d067 PUD 0
Oops: 0000 [#1] PREEMPT SMP
CPU 3
...
Pid: 7302, comm: trinity-child3 Not tainted 3.4.24.09+ 40 Huawei Technologies Co., Ltd. Tecal RH2285          /BC11BTSA
RIP: 0010:[<ffffffffa0109738>]  [<ffffffffa0109738>] dlci_ioctl+0xd8/0x2d4 [dlci]
...
Call Trace:
  [<ffffffff8137c5c3>] sock_ioctl+0x153/0x280
  [<ffffffff81195494>] do_vfs_ioctl+0xa4/0x5e0
  [<ffffffff8118354a>] ? fget_light+0x3ea/0x490
  [<ffffffff81195a1f>] sys_ioctl+0x4f/0x80
  [<ffffffff81478b69>] system_call_fastpath+0x16/0x1b
...

It's because the net device is not a dlci device.

Reported-by: Li Jinyue <lijinyue@huawei.com>
Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agodlci: acquire rtnl_lock before calling __dev_get_by_name()
Zefan Li [Wed, 26 Jun 2013 07:29:54 +0000]
dlci: acquire rtnl_lock before calling __dev_get_by_name()

commit 11eb2645cbf38a08ae491bf6c602eea900ec0bb5 upstream.

Otherwise the net device returned can be freed at anytime.

Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agohw_breakpoint: Use cpu_possible_mask in {reserve,release}_bp_slot()
Oleg Nesterov [Thu, 20 Jun 2013 15:50:09 +0000]
hw_breakpoint: Use cpu_possible_mask in {reserve,release}_bp_slot()

commit c790b0ad23f427c7522ffed264706238c57c007e upstream.

fetch_bp_busy_slots() and toggle_bp_slot() use
for_each_online_cpu(), this is obviously wrong wrt cpu_up() or
cpu_down(), we can over/under account the per-cpu numbers.

For example:

# echo 0 >> /sys/devices/system/cpu/cpu1/online
# perf record -e mem:0x10 -p 1 &
# echo 1 >> /sys/devices/system/cpu/cpu1/online
# perf record -e mem:0x10,mem:0x10,mem:0x10,mem:0x10 -C1 -a &
# taskset -p 0x2 1

triggers the same WARN_ONCE("Can't find any breakpoint slot") in
arch_install_hw_breakpoint().

Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/20130620155009.GA6327@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoBluetooth: Fix crash in l2cap_build_cmd() with small MTU
Anderson Lizardo [Sun, 2 Jun 2013 20:30:40 +0000]
Bluetooth: Fix crash in l2cap_build_cmd() with small MTU

commit 300b962e5244a1ea010df7e88595faa0085b461d upstream.

If a too small MTU value is set with ioctl(HCISETACLMTU) or by a bogus
controller, memory corruption happens due to a memcpy() call with
negative length.

Fix this crash on either incoming or outgoing connections with a MTU
smaller than L2CAP_HDR_SIZE + L2CAP_CMD_HDR_SIZE:

[   46.885433] BUG: unable to handle kernel paging request at f56ad000
[   46.888037] IP: [<c03d94cd>] memcpy+0x1d/0x40
[   46.888037] *pdpt = 0000000000ac3001 *pde = 00000000373f8067 *pte = 80000000356ad060
[   46.888037] Oops: 0002 [#1] SMP DEBUG_PAGEALLOC
[   46.888037] Modules linked in: hci_vhci bluetooth virtio_balloon i2c_piix4 uhci_hcd usbcore usb_common
[   46.888037] CPU: 0 PID: 1044 Comm: kworker/u3:0 Not tainted 3.10.0-rc1+ #12
[   46.888037] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007
[   46.888037] Workqueue: hci0 hci_rx_work [bluetooth]
[   46.888037] task: f59b15b0 ti: f55c4000 task.ti: f55c4000
[   46.888037] EIP: 0060:[<c03d94cd>] EFLAGS: 00010212 CPU: 0
[   46.888037] EIP is at memcpy+0x1d/0x40
[   46.888037] EAX: f56ac1c0 EBX: fffffff8 ECX: 3ffffc6e EDX: f55c5cf2
[   46.888037] ESI: f55c6b32 EDI: f56ad000 EBP: f55c5c68 ESP: f55c5c5c
[   46.888037]  DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
[   46.888037] CR0: 8005003b CR2: f56ad000 CR3: 3557d000 CR4: 000006f0
[   46.888037] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
[   46.888037] DR6: ffff0ff0 DR7: 00000400
[   46.888037] Stack:
[   46.888037]  fffffff8 00000010 00000003 f55c5cac f8c6a54c ffffffff f8c69eb2 00000000
[   46.888037]  f4783cdc f57f0070 f759c590 1001c580 00000003 0200000a 00000000 f5a88560
[   46.888037]  f5ba2600 f5a88560 00000041 00000000 f55c5d90 f8c6f4c7 00000008 f55c5cf2
[   46.888037] Call Trace:
[   46.888037]  [<f8c6a54c>] l2cap_send_cmd+0x1cc/0x230 [bluetooth]
[   46.888037]  [<f8c69eb2>] ? l2cap_global_chan_by_psm+0x152/0x1a0 [bluetooth]
[   46.888037]  [<f8c6f4c7>] l2cap_connect+0x3f7/0x540 [bluetooth]
[   46.888037]  [<c019b37b>] ? trace_hardirqs_off+0xb/0x10
[   46.888037]  [<c01a0ff8>] ? mark_held_locks+0x68/0x110
[   46.888037]  [<c064ad20>] ? mutex_lock_nested+0x280/0x360
[   46.888037]  [<c064b9d9>] ? __mutex_unlock_slowpath+0xa9/0x150
[   46.888037]  [<c01a118c>] ? trace_hardirqs_on_caller+0xec/0x1b0
[   46.888037]  [<c064ad08>] ? mutex_lock_nested+0x268/0x360
[   46.888037]  [<c01a125b>] ? trace_hardirqs_on+0xb/0x10
[   46.888037]  [<f8c72f8d>] l2cap_recv_frame+0xb2d/0x1d30 [bluetooth]
[   46.888037]  [<c01a0ff8>] ? mark_held_locks+0x68/0x110
[   46.888037]  [<c064b9d9>] ? __mutex_unlock_slowpath+0xa9/0x150
[   46.888037]  [<c01a118c>] ? trace_hardirqs_on_caller+0xec/0x1b0
[   46.888037]  [<f8c754f1>] l2cap_recv_acldata+0x2a1/0x320 [bluetooth]
[   46.888037]  [<f8c491d8>] hci_rx_work+0x518/0x810 [bluetooth]
[   46.888037]  [<f8c48df2>] ? hci_rx_work+0x132/0x810 [bluetooth]
[   46.888037]  [<c0158979>] process_one_work+0x1a9/0x600
[   46.888037]  [<c01588fb>] ? process_one_work+0x12b/0x600
[   46.888037]  [<c015922e>] ? worker_thread+0x19e/0x320
[   46.888037]  [<c015922e>] ? worker_thread+0x19e/0x320
[   46.888037]  [<c0159187>] worker_thread+0xf7/0x320
[   46.888037]  [<c0159090>] ? rescuer_thread+0x290/0x290
[   46.888037]  [<c01602f8>] kthread+0xa8/0xb0
[   46.888037]  [<c0656777>] ret_from_kernel_thread+0x1b/0x28
[   46.888037]  [<c0160250>] ? flush_kthread_worker+0x120/0x120
[   46.888037] Code: c3 90 8d 74 26 00 e8 63 fc ff ff eb e8 90 55 89 e5 83 ec 0c 89 5d f4 89 75 f8 89 7d fc 3e 8d 74 26 00 89 cb 89 c7 c1 e9 02 89 d6 <f3> a5 89 d9 83 e1 03 74 02 f3 a4 8b 5d f4 8b 75 f8 8b 7d fc 89
[   46.888037] EIP: [<c03d94cd>] memcpy+0x1d/0x40 SS:ESP 0068:f55c5c5c
[   46.888037] CR2: 00000000f56ad000
[   46.888037] ---[ end trace 0217c1f4d78714a9 ]---

Signed-off-by: Anderson Lizardo <anderson.lizardo@openbossa.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoARM: 7772/1: Fix missing flush_kernel_dcache_page() for noMMU
Simon Baatz [Sat, 22 Jun 2013 21:01:25 +0000]
ARM: 7772/1: Fix missing flush_kernel_dcache_page() for noMMU

commit 63384fd0b1509acf522a8a8fcede09087eedb7df upstream.

Commit 1bc3974 (ARM: 7755/1: handle user space mapped pages in
flush_kernel_dcache_page) moved the implementation of
flush_kernel_dcache_page() into mm/flush.c but did not implement it
on noMMU ARM.

Signed-off-by: Simon Baatz <gmbnomis@gmail.com>
Acked-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoARM: 7755/1: handle user space mapped pages in flush_kernel_dcache_page
Simon Baatz [Mon, 10 Jun 2013 20:10:12 +0000]
ARM: 7755/1: handle user space mapped pages in flush_kernel_dcache_page

commit 1bc39742aab09248169ef9d3727c9def3528b3f3 upstream.

Commit f8b63c1 made flush_kernel_dcache_page a no-op assuming that
the pages it needs to handle are kernel mapped only.  However, for
example when doing direct I/O, pages with user space mappings may
occur.

Thus, continue to do lazy flushing if there are no user space
mappings.  Otherwise, flush the kernel cache lines directly.

Signed-off-by: Simon Baatz <gmbnomis@gmail.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoLinux 3.4.51
Greg Kroah-Hartman [Thu, 27 Jun 2013 18:28:07 +0000]
Linux 3.4.51

6 years agoinotify: invalid mask should return a error number but not set it
Zhao Hongjiang [Tue, 30 Apr 2013 22:26:46 +0000]
inotify: invalid mask should return a error number but not set it

commit 04df32fa10ab9a6f0643db2949d42efc966bc844 upstream.

When we run the crackerjack testsuite, the inotify_add_watch test is
stalled.

This is caused by the invalid mask 0 - the task is waiting for the event
but it never comes.  inotify_add_watch() should return -EINVAL as it did
before commit 676a0675cf92 ("inotify: remove broken mask checks causing
unmount to be EINVAL").  That commit removes the invalid mask check, but
that check is needed.

Check the mask's ALL_INOTIFY_BITS before the inotify_arg_to_mask() call.
If none are set, just return -EINVAL.

Because IN_UNMOUNT is in ALL_INOTIFY_BITS, this change will not trigger
the problem that above commit fixed.

[akpm@linux-foundation.org: fix build]
Signed-off-by: Zhao Hongjiang <zhaohongjiang@huawei.com>
Acked-by: Jim Somerville <Jim.Somerville@windriver.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Eric Paris <eparis@parisplace.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agotarget/iscsi: don't corrupt bh_count in iscsit_stop_time2retain_timer()
Joern Engel [Thu, 30 May 2013 20:36:51 +0000]
target/iscsi: don't corrupt bh_count in iscsit_stop_time2retain_timer()

commit 574780fd5e6ec52bd43e0bdb777a19e4c4c6aa9c upstream.

Here is a fun one.  Bug seems to have been introduced by commit 140854cb,
almost two years ago.  I have no idea why we only started seeing it now,
but we did.

Rough callgraph:
core_tpg_set_initiator_node_queue_depth()
`-> spin_lock_irqsave(&tpg->session_lock, flags);
`-> lio_tpg_shutdown_session()
    `-> iscsit_stop_time2retain_timer()
        `-> spin_unlock_bh(&se_tpg->session_lock);
        `-> spin_lock_bh(&se_tpg->session_lock);
`-> spin_unlock_irqrestore(&tpg->session_lock, flags);

core_tpg_set_initiator_node_queue_depth() used to call spin_lock_bh(),
but 140854cb changed that to spin_lock_irqsave().  However,
lio_tpg_shutdown_session() still claims to be called with spin_lock_bh()
held, as does iscsit_stop_time2retain_timer():
 *      Called with spin_lock_bh(&struct se_portal_group->session_lock) held

Stale documentation is mostly annoying, but in this case the dropping
the lock with the _bh variant is plain wrong.  It is also wrong to drop
locks two functions below the lock-holder, but I will ignore that bit
for now.

After some more locking and unlocking we eventually hit this backtrace:
------------[ cut here ]------------
WARNING: at kernel/softirq.c:159 local_bh_enable_ip+0xe8/0x100()
Pid: 24645, comm: lio_helper.py Tainted: G           O 3.6.11+
Call Trace:
 [<ffffffff8103e5ff>] warn_slowpath_common+0x7f/0xc0
 [<ffffffffa040ae37>] ? iscsit_inc_conn_usage_count+0x37/0x50 [iscsi_target_mod]
 [<ffffffff8103e65a>] warn_slowpath_null+0x1a/0x20
 [<ffffffff810472f8>] local_bh_enable_ip+0xe8/0x100
 [<ffffffff815b8365>] _raw_spin_unlock_bh+0x15/0x20
 [<ffffffffa040ae37>] iscsit_inc_conn_usage_count+0x37/0x50 [iscsi_target_mod]
 [<ffffffffa041149a>] iscsit_stop_session+0xfa/0x1c0 [iscsi_target_mod]
 [<ffffffffa0417fab>] lio_tpg_shutdown_session+0x7b/0x90 [iscsi_target_mod]
 [<ffffffffa033ede4>] core_tpg_set_initiator_node_queue_depth+0xe4/0x290 [target_core_mod]
 [<ffffffffa0409032>] iscsit_tpg_set_initiator_node_queue_depth+0x12/0x20 [iscsi_target_mod]
 [<ffffffffa0415c29>] lio_target_nacl_store_cmdsn_depth+0xa9/0x180 [iscsi_target_mod]
 [<ffffffffa0331b49>] target_fabric_nacl_base_attr_store+0x39/0x40 [target_core_mod]
 [<ffffffff811b857d>] configfs_write_file+0xbd/0x120
 [<ffffffff81148f36>] vfs_write+0xc6/0x180
 [<ffffffff81149251>] sys_write+0x51/0x90
 [<ffffffff815c0969>] system_call_fastpath+0x16/0x1b
---[ end trace 3747632b9b164652 ]---

As a pure band-aid, this patch drops the _bh.

Signed-off-by: Joern Engel <joern@logfs.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

6 years agoUSB: serial: ti_usb_3410_5052: new device id for Abbot strip port cable
Anders Hammarquist [Tue, 18 Jun 2013 23:45:48 +0000]
USB: serial: ti_usb_3410_5052: new device id for Abbot strip port cable

commit 35a2fbc941accd0e9f1bfadd669311786118d874 upstream.

Add product id for Abbott strip port cable for Precision meter which
uses the TI 3410 chip.

Signed-off-by: Anders Hammarquist <iko@iko.pp.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoInput: cyttsp - fix memcpy size param
Ferruh Yigit [Thu, 23 May 2013 16:56:55 +0000]
Input: cyttsp - fix memcpy size param

commit d2983cdb480157f637df07723f28aaa657b1080d upstream.

memcpy param is wrong because of offset in bl_cmd, this may corrupt the
stack which may cause a crash.

Tested-by: Ferruh Yigit <fery@cypress.com> on TMA300-DVK
Signed-off-by: Ferruh Yigit <fery@cypress.com>
Acked-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agobonding: rlb mode of bond should not alter ARP originating via bridge
Zheng Li [Wed, 19 Jun 2013 07:53:47 +0000]
bonding: rlb mode of bond should not alter ARP originating via bridge

[ Upstream commit 567b871e503316b0927e54a3d7c86d50b722d955 ]

Do not modify or load balance ARP packets passing through balance-alb
mode (wherein the ARP did not originate locally, and arrived via a bridge).

Modifying pass-through ARP replies causes an incorrect MAC address
to be placed into the ARP packet, rendering peers unable to communicate
with the actual destination from which the ARP reply originated.

Load balancing pass-through ARP requests causes an entry to be
created for the peer in the rlb table, and bond_alb_monitor will
occasionally issue ARP updates to all peers in the table instrucing them
as to which MAC address they should communicate with; this occurs when
some event sets rx_ntt.  In the bridged case, however, the MAC address
used for the update would be the MAC of the slave, not the actual source
MAC of the originating destination.  This would render peers unable to
communicate with the destinations beyond the bridge.

Signed-off-by: Zheng Li <zheng.x.li@oracle.com>
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Matthew O'Connor <liquidhorse@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agol2tp: Fix sendmsg() return value
Guillaume Nault [Wed, 12 Jun 2013 14:07:36 +0000]
l2tp: Fix sendmsg() return value

[ Upstream commit a6f79d0f26704214b5b702bbac525cb72997f984 ]

PPPoL2TP sockets should comply with the standard send*() return values
(i.e. return number of bytes sent instead of 0 upon success).

Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agol2tp: Fix PPP header erasure and memory leak
Guillaume Nault [Wed, 12 Jun 2013 14:07:23 +0000]
l2tp: Fix PPP header erasure and memory leak

[ Upstream commit 55b92b7a11690bc377b5d373872a6b650ae88e64 ]

Copy user data after PPP framing header. This prevents erasure of the
added PPP header and avoids leaking two bytes of uninitialised memory
at the end of skb's data buffer.

Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agopacket: packet_getname_spkt: make sure string is always 0-terminated
Daniel Borkmann [Wed, 12 Jun 2013 14:02:27 +0000]
packet: packet_getname_spkt: make sure string is always 0-terminated

[ Upstream commit 2dc85bf323515e59e15dfa858d1472bb25cad0fe ]

uaddr->sa_data is exactly of size 14, which is hard-coded here and
passed as a size argument to strncpy(). A device name can be of size
IFNAMSIZ (== 16), meaning we might leave the destination string
unterminated. Thus, use strlcpy() and also sizeof() while we're
at it. We need to memset the data area beforehand, since strlcpy
does not padd the remaining buffer with zeroes for user space, so
that we do not possibly leak anything.

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoteam: check return value of team_get_port_by_index_rcu() for NULL
Jiri Pirko [Sat, 8 Jun 2013 13:00:53 +0000]
team: check return value of team_get_port_by_index_rcu() for NULL

[ Upstream commit 76c455decbbad31de21c727edb184a963f42b40b ]

team_get_port_by_index_rcu() might return NULL due to race between port
removal and skb tx path. Panic is easily triggeable when txing packets
and adding/removing port in a loop.

introduced by commit 3d249d4ca "net: introduce ethernet teaming device"
and commit 753f993911b "team: introduce random mode" (for random mode)

Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agonet: sctp: fix NULL pointer dereference in socket destruction
Daniel Borkmann [Thu, 6 Jun 2013 13:53:47 +0000]
net: sctp: fix NULL pointer dereference in socket destruction

[ Upstream commit 1abd165ed757db1afdefaac0a4bc8a70f97d258c ]

While stress testing sctp sockets, I hit the following panic:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000020
IP: [<ffffffffa0490c4e>] sctp_endpoint_free+0xe/0x40 [sctp]
PGD 7cead067 PUD 7ce76067 PMD 0
Oops: 0000 [#1] SMP
Modules linked in: sctp(F) libcrc32c(F) [...]
CPU: 7 PID: 2950 Comm: acc Tainted: GF            3.10.0-rc2+ #1
Hardware name: Dell Inc. PowerEdge T410/0H19HD, BIOS 1.6.3 02/01/2011
task: ffff88007ce0e0c0 ti: ffff88007b568000 task.ti: ffff88007b568000
RIP: 0010:[<ffffffffa0490c4e>]  [<ffffffffa0490c4e>] sctp_endpoint_free+0xe/0x40 [sctp]
RSP: 0018:ffff88007b569e08  EFLAGS: 00010292
RAX: 0000000000000000 RBX: ffff88007db78a00 RCX: dead000000200200
RDX: ffffffffa049fdb0 RSI: ffff8800379baf38 RDI: 0000000000000000
RBP: ffff88007b569e18 R08: ffff88007c230da0 R09: 0000000000000001
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: ffff880077990d00 R14: 0000000000000084 R15: ffff88007db78a00
FS:  00007fc18ab61700(0000) GS:ffff88007fc60000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000000020 CR3: 000000007cf9d000 CR4: 00000000000007e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Stack:
 ffff88007b569e38 ffff88007db78a00 ffff88007b569e38 ffffffffa049fded
 ffffffff81abf0c0 ffff88007db78a00 ffff88007b569e58 ffffffff8145b60e
 0000000000000000 0000000000000000 ffff88007b569eb8 ffffffff814df36e
Call Trace:
 [<ffffffffa049fded>] sctp_destroy_sock+0x3d/0x80 [sctp]
 [<ffffffff8145b60e>] sk_common_release+0x1e/0xf0
 [<ffffffff814df36e>] inet_create+0x2ae/0x350
 [<ffffffff81455a6f>] __sock_create+0x11f/0x240
 [<ffffffff81455bf0>] sock_create+0x30/0x40
 [<ffffffff8145696c>] SyS_socket+0x4c/0xc0
 [<ffffffff815403be>] ? do_page_fault+0xe/0x10
 [<ffffffff8153cb32>] ? page_fault+0x22/0x30
 [<ffffffff81544e02>] system_call_fastpath+0x16/0x1b
Code: 0c c9 c3 66 2e 0f 1f 84 00 00 00 00 00 e8 fb fe ff ff c9 c3 66 0f
      1f 84 00 00 00 00 00 55 48 89 e5 53 48 83 ec 08 66 66 66 66 90 <48>
      8b 47 20 48 89 fb c6 47 1c 01 c6 40 12 07 e8 9e 68 01 00 48
RIP  [<ffffffffa0490c4e>] sctp_endpoint_free+0xe/0x40 [sctp]
 RSP <ffff88007b569e08>
CR2: 0000000000000020
---[ end trace e0d71ec1108c1dd9 ]---

I did not hit this with the lksctp-tools functional tests, but with a
small, multi-threaded test program, that heavily allocates, binds,
listens and waits in accept on sctp sockets, and then randomly kills
some of them (no need for an actual client in this case to hit this).
Then, again, allocating, binding, etc, and then killing child processes.

This panic then only occurs when ``echo 1 > /proc/sys/net/sctp/auth_enable''
is set. The cause for that is actually very simple: in sctp_endpoint_init()
we enter the path of sctp_auth_init_hmacs(). There, we try to allocate
our crypto transforms through crypto_alloc_hash(). In our scenario,
it then can happen that crypto_alloc_hash() fails with -EINTR from
crypto_larval_wait(), thus we bail out and release the socket via
sk_common_release(), sctp_destroy_sock() and hit the NULL pointer
dereference as soon as we try to access members in the endpoint during
sctp_endpoint_free(), since endpoint at that time is still NULL. Now,
if we have that case, we do not need to do any cleanup work and just
leave the destruction handler.

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoipv6: assign rt6_info to inet6_ifaddr in init_loopback
Gao feng [Sun, 2 Jun 2013 22:16:21 +0000]
ipv6: assign rt6_info to inet6_ifaddr in init_loopback

[ Upstream commit 534c877928a16ae5f9776436a497109639bf67dc ]

Commit 25fb6ca4ed9cad72f14f61629b68dc03c0d9713f
"net IPv6 : Fix broken IPv6 routing table after loopback down-up"
forgot to assign rt6_info to the inet6_ifaddr.
When disable the net device, the rt6_info which allocated
in init_loopback will not be destroied in __ipv6_ifa_notify.

This will trigger the waring message below
[23527.916091] unregister_netdevice: waiting for tap0 to become free. Usage count = 1

Reported-by: Arkadiusz Miskiewicz <a.miskiewicz@gmail.com>
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agonet: force a reload of first item in hlist_nulls_for_each_entry_rcu
Eric Dumazet [Wed, 29 May 2013 09:06:27 +0000]
net: force a reload of first item in hlist_nulls_for_each_entry_rcu

[ Upstream commit c87a124a5d5e8cf8e21c4363c3372bcaf53ea190 ]

Roman Gushchin discovered that udp4_lib_lookup2() was not reloading
first item in the rcu protected list, in case the loop was restarted.

This produced soft lockups as in https://lkml.org/lkml/2013/4/16/37

rcu_dereference(X)/ACCESS_ONCE(X) seem to not work as intended if X is
ptr->field :

In some cases, gcc caches the value or ptr->field in a register.

Use a barrier() to disallow such caching, as documented in
Documentation/atomic_ops.txt line 114

Thanks a lot to Roman for providing analysis and numerous patches.

Diagnosed-by: Roman Gushchin <klamm@yandex-team.ru>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Boris Zhmurov <zhmurov@yandex-team.ru>
Signed-off-by: Roman Gushchin <klamm@yandex-team.ru>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agonet: Block MSG_CMSG_COMPAT in send(m)msg and recv(m)msg
Andy Lutomirski [Wed, 22 May 2013 21:07:44 +0000]
net: Block MSG_CMSG_COMPAT in send(m)msg and recv(m)msg

[ Upstream commits 1be374a0518a288147c6a7398792583200a67261 and
  a7526eb5d06b0084ef12d7b168d008fcf516caab ]

MSG_CMSG_COMPAT is (AFAIK) not intended to be part of the API --
it's a hack that steals a bit to indicate to other networking code
that a compat entry was used.  So don't allow it from a non-compat
syscall.

This prevents an oops when running this code:

int main()
{
int s;
struct sockaddr_in addr;
struct msghdr *hdr;

char *highpage = mmap((void*)(TASK_SIZE_MAX - 4096), 4096,
                      PROT_READ | PROT_WRITE,
                      MAP_PRIVATE | MAP_ANONYMOUS | MAP_FIXED, -1, 0);
if (highpage == MAP_FAILED)
err(1, "mmap");

s = socket(AF_INET, SOCK_DGRAM, IPPROTO_UDP);
if (s == -1)
err(1, "socket");

        addr.sin_family = AF_INET;
        addr.sin_port = htons(1);
        addr.sin_addr.s_addr = htonl(INADDR_LOOPBACK);
if (connect(s, (struct sockaddr*)&addr, sizeof(addr)) != 0)
err(1, "connect");

void *evil = highpage + 4096 - COMPAT_MSGHDR_SIZE;
printf("Evil address is %p\n", evil);

if (syscall(__NR_sendmmsg, s, evil, 1, MSG_CMSG_COMPAT) < 0)
err(1, "sendmmsg");

return 0;
}

Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoip_tunnel: fix kernel panic with icmp_dest_unreach
Eric Dumazet [Fri, 24 May 2013 05:49:58 +0000]
ip_tunnel: fix kernel panic with icmp_dest_unreach

[ Upstream commit a622260254ee481747cceaaa8609985b29a31565 ]

Daniel Petre reported crashes in icmp_dst_unreach() with following call
graph:

Daniel found a similar problem mentioned in
 http://lkml.indiana.edu/hypermail/linux/kernel/1007.0/00961.html

And indeed this is the root cause : skb->cb[] contains data fooling IP
stack.

We must clear IPCB in ip_tunnel_xmit() sooner in case dst_link_failure()
is called. Or else skb->cb[] might contain garbage from GSO segmentation
layer.

A similar fix was tested on linux-3.9, but gre code was refactored in
linux-3.10. I'll send patches for stable kernels as well.

Many thanks to Daniel for providing reports, patches and testing !

Reported-by: Daniel Petre <daniel.petre@rcs-rds.ro>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agotcp: xps: fix reordering issues
Eric Dumazet [Thu, 23 May 2013 07:44:20 +0000]
tcp: xps: fix reordering issues

[ Upstream commit 547669d483e5783d722772af1483fa474da7caf9 ]

commit 3853b5841c01a ("xps: Improvements in TX queue selection")
introduced ooo_okay flag, but the condition to set it is slightly wrong.

In our traces, we have seen ACK packets being received out of order,
and RST packets sent in response.

We should test if we have any packets still in host queue.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Tom Herbert <therbert@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agotcp: bug fix in proportional rate reduction.
Nandita Dukkipati [Tue, 21 May 2013 15:12:07 +0000]
tcp: bug fix in proportional rate reduction.

[ Upstream commit 35f079ebbc860dcd1cca70890c9c8d59c1145525 ]

This patch is a fix for a bug triggering newly_acked_sacked < 0
in tcp_ack(.).

The bug is triggered by sacked_out decreasing relative to prior_sacked,
but packets_out remaining the same as pior_packets. This is because the
snapshot of prior_packets is taken after tcp_sacktag_write_queue() while
prior_sacked is captured before tcp_sacktag_write_queue(). The problem
is: tcp_sacktag_write_queue (tcp_match_skb_to_sack() -> tcp_fragment)
adjusts the pcount for packets_out and sacked_out (MSS change or other
reason). As a result, this delta in pcount is reflected in
(prior_sacked - sacked_out) but not in (prior_packets - packets_out).

This patch does the following:
1) initializes prior_packets at the start of tcp_ack() so as to
capture the delta in packets_out created by tcp_fragment.
2) introduces a new "previous_packets_out" variable that snapshots
packets_out right before tcp_clean_rtx_queue, so pkts_acked can be
correctly computed as before.
3) Computes pkts_acked using previous_packets_out, and computes
newly_acked_sacked using prior_packets.

Signed-off-by: Nandita Dukkipati <nanditad@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years ago8139cp: reset BQL when ring tx ring cleared
stephen hemminger [Mon, 20 May 2013 06:54:43 +0000]
8139cp: reset BQL when ring tx ring cleared

[ Upstream commit 98962baad72fd6d393bf39dbb7c2076532c363c6 ]

This patch cures transmit timeout's with DHCP observed
while running under KVM. When the transmit ring is cleaned out,
the Byte Queue Limit values need to be reset.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agor8169: fix offloaded tx checksum for small packets.
Francois Romieu [Sat, 18 May 2013 01:24:46 +0000]
r8169: fix offloaded tx checksum for small packets.

[ Upstream commit b423e9ae49d78ea3f53b131c8d5a6087aed16fd6 ]

8168evl offloaded checksums are wrong since commit
e5195c1f31f399289347e043d6abf3ffa80f0005 ("r8169: fix 8168evl frame padding.")
pads small packets to 60 bytes (without ethernet checksum). Typical symptoms
appear as UDP checksums which are wrong by the count of added bytes.

It isn't worth compensating. Let the driver checksum.

Due to the skb length changes, TSO code is moved before the Tx descriptor gets
written.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Tested-by: Holger Hoffstätte <holger.hoffstaette@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agonetlabel: improve domain mapping validation
Paul Moore [Fri, 17 May 2013 09:08:50 +0000]
netlabel: improve domain mapping validation

[ Upstream commit 6b21e1b77d1a3d58ebfd513264c885695e8a0ba5 ]

The net/netlabel/netlabel_domainhash.c:netlbl_domhsh_add() function
does not properly validate new domain hash entries resulting in
potential problems when an administrator attempts to add an invalid
entry.  One such problem, as reported by Vlad Halilov, is a kernel
BUG (found in netlabel_domainhash.c:netlbl_domhsh_audit_add()) when
adding an IPv6 outbound mapping with a CIPSO configuration.

This patch corrects this problem by adding the necessary validation
code to netlbl_domhsh_add() via the newly created
netlbl_domhsh_validate() function.

Ideally this patch should also be pushed to the currently active
-stable trees.

Reported-by: Vlad Halilov <vlad.halilov@gmail.com>
Signed-off-by: Paul Moore <pmoore@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoipv6: fix possible crashes in ip6_cork_release()
Eric Dumazet [Fri, 17 May 2013 04:53:13 +0000]
ipv6: fix possible crashes in ip6_cork_release()

[ Upstream commit 284041ef21fdf2e0d216ab6b787bc9072b4eb58a ]

commit 0178b695fd6b4 ("ipv6: Copy cork options in ip6_append_data")
added some code duplication and bad error recovery, leading to potential
crash in ip6_cork_release() as kfree() could be called with garbage.

use kzalloc() to make sure this wont happen.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agogianfar: add missing iounmap() on error in gianfar_ptp_probe()
Wei Yongjun [Thu, 16 May 2013 22:25:34 +0000]
gianfar: add missing iounmap() on error in gianfar_ptp_probe()

[ Upstream commit e5f5e380e0f3bb11f04ca5bc66a551e58e0ad26e ]

Add the missing iounmap() before return from gianfar_ptp_probe()
in the error handling case.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agotcp: fix tcp_md5_hash_skb_data()
Eric Dumazet [Mon, 13 May 2013 21:25:52 +0000]
tcp: fix tcp_md5_hash_skb_data()

[ Upstream commit 54d27fcb338bd9c42d1dfc5a39e18f6f9d373c2e ]

TCP md5 communications fail [1] for some devices, because sg/crypto code
assume page offsets are below PAGE_SIZE.

This was discovered using mlx4 driver [2], but I suspect loopback
might trigger the same bug now we use order-3 pages in tcp_sendmsg()

[1] Failure is giving following messages.

huh, entered softirq 3 NET_RX ffffffff806ad230 preempt_count 00000100,
exited with 00000101?

[2] mlx4 driver uses order-2 pages to allocate RX frags

Reported-by: Matt Schnall <mischnal@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Bernhard Beck <bbeck@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoKVM: x86: remove vcpu's CPL check in host-invoked XCR set
Zhanghaoyu (A) [Fri, 14 Jun 2013 07:36:13 +0000]
KVM: x86: remove vcpu's CPL check in host-invoked XCR set

commit 764bcbc5a6d7a2f3e75c9f0e4caa984e2926e346 upstream.

__kvm_set_xcr function does the CPL check when set xcr. __kvm_set_xcr is
called in two flows, one is invoked by guest, call stack shown as below,

  handle_xsetbv(or xsetbv_interception)
    kvm_set_xcr
      __kvm_set_xcr

the other one is invoked by host, for example during system reset:

  kvm_arch_vcpu_ioctl
    kvm_vcpu_ioctl_x86_set_xcrs
      __kvm_set_xcr

The former does need the CPL check, but the latter does not.

Signed-off-by: Zhang Haoyu <haoyu.zhang@huawei.com>
[Tweaks to commit message. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agotilepro: work around module link error with gcc 4.7
Chris Metcalf [Sat, 15 Jun 2013 20:47:47 +0000]
tilepro: work around module link error with gcc 4.7

commit 3cb3f839d306443f3d1e79b0bde1a2ad2c12b555 upstream.

gcc 4.7.x is emitting calls to __ffsdi2 where previously
it used to inline the appropriate ctz instructions.
While this needs to be fixed in gcc, it's also easy to avoid
having it cause build failures when building with those
compilers by exporting __ffsdi2 to modules.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoclk: remove notifier from list before freeing it
Lai Jiangshan [Mon, 3 Jun 2013 09:17:15 +0000]
clk: remove notifier from list before freeing it

commit 72b5322f11ff0abf6a52b3007486656578d2c982 upstream.

The @cn is stay in @clk_notifier_list after it is freed, it cause
memory corruption.

Example, if @clk is registered(first), unregistered(first),
registered(second), unregistered(second).

The freed @cn will be used when @clk is registered(second),
and the bug will be happened when @clk is unregistered(second):

[  517.040000] clk_notif_dbg clk_notif_dbg.1: clk_notifier_unregister()
[  517.040000] Unable to handle kernel paging request at virtual address 00df3008
[  517.050000] pgd = ed858000
[  517.050000] [00df3008] *pgd=00000000
[  517.060000] Internal error: Oops: 5 [#1] PREEMPT SMP ARM
[  517.060000] Modules linked in: clk_notif_dbg(O-) [last unloaded: clk_notif_dbg]
[  517.060000] CPU: 1 PID: 499 Comm: modprobe Tainted: G           O 3.10.0-rc3-00119-ga93cb29-dirty #85
[  517.060000] task: ee1e0180 ti: ee3e6000 task.ti: ee3e6000
[  517.060000] PC is at srcu_readers_seq_idx+0x48/0x84
[  517.060000] LR is at srcu_readers_seq_idx+0x60/0x84
[  517.060000] pc : [<c0052720>]    lr : [<c0052738>]    psr: 80070013
[  517.060000] sp : ee3e7d48  ip : 00000000  fp : ee3e7d6c
[  517.060000] r10: 00000000  r9 : ee3e6000  r8 : 00000000
[  517.060000] r7 : ed84fe4c  r6 : c068ec90  r5 : c068e430  r4 : 00000000
[  517.060000] r3 : 00df3000  r2 : 00000000  r1 : 00000002  r0 : 00000000
[  517.060000] Flags: Nzcv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
[  517.060000] Control: 18c5387d  Table: 2d85804a  DAC: 00000015
[  517.060000] Process modprobe (pid: 499, stack limit = 0xee3e6238)
[  517.060000] Stack: (0xee3e7d48 to 0xee3e8000)
....
[  517.060000] [<c0052720>] (srcu_readers_seq_idx+0x48/0x84) from [<c0052790>] (try_check_zero+0x34/0xfc)
[  517.060000] [<c0052790>] (try_check_zero+0x34/0xfc) from [<c00528b0>] (srcu_advance_batches+0x58/0x114)
[  517.060000] [<c00528b0>] (srcu_advance_batches+0x58/0x114) from [<c0052c30>] (__synchronize_srcu+0x114/0x1ac)
[  517.060000] [<c0052c30>] (__synchronize_srcu+0x114/0x1ac) from [<c0052d14>] (synchronize_srcu+0x2c/0x34)
[  517.060000] [<c0052d14>] (synchronize_srcu+0x2c/0x34) from [<c0053a08>] (srcu_notifier_chain_unregister+0x68/0x74)
[  517.060000] [<c0053a08>] (srcu_notifier_chain_unregister+0x68/0x74) from [<c0375a78>] (clk_notifier_unregister+0x7c/0xc0)
[  517.060000] [<c0375a78>] (clk_notifier_unregister+0x7c/0xc0) from [<bf008034>] (clk_notif_dbg_remove+0x34/0x9c [clk_notif_dbg])
[  517.060000] [<bf008034>] (clk_notif_dbg_remove+0x34/0x9c [clk_notif_dbg]) from [<c02bb974>] (platform_drv_remove+0x24/0x28)
[  517.060000] [<c02bb974>] (platform_drv_remove+0x24/0x28) from [<c02b9bf8>] (__device_release_driver+0x8c/0xd4)
[  517.060000] [<c02b9bf8>] (__device_release_driver+0x8c/0xd4) from [<c02ba680>] (driver_detach+0x9c/0xc4)
[  517.060000] [<c02ba680>] (driver_detach+0x9c/0xc4) from [<c02b99c4>] (bus_remove_driver+0xcc/0xfc)
[  517.060000] [<c02b99c4>] (bus_remove_driver+0xcc/0xfc) from [<c02bace4>] (driver_unregister+0x54/0x78)
[  517.060000] [<c02bace4>] (driver_unregister+0x54/0x78) from [<c02bbb44>] (platform_driver_unregister+0x1c/0x20)
[  517.060000] [<c02bbb44>] (platform_driver_unregister+0x1c/0x20) from [<bf0081f8>] (clk_notif_dbg_driver_exit+0x14/0x1c [clk_notif_dbg])
[  517.060000] [<bf0081f8>] (clk_notif_dbg_driver_exit+0x14/0x1c [clk_notif_dbg]) from [<c00835e4>] (SyS_delete_module+0x200/0x28c)
[  517.060000] [<c00835e4>] (SyS_delete_module+0x200/0x28c) from [<c000edc0>] (ret_fast_syscall+0x0/0x48)
[  517.060000] Code: e5973004 e7911102 e0833001 e2881002 (e7933101)

Reported-by: Sören Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Tested-by: Sören Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
[mturquette@linaro.org: shortened $SUBJECT]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoALSA: usb-audio: work around Android accessory firmware bug
Clemens Ladisch [Sat, 15 Jun 2013 09:21:09 +0000]
ALSA: usb-audio: work around Android accessory firmware bug

commit 342cda29343a6272c630f94ed56810a76740251b upstream.

When the Android firmware enables the audio interfaces in accessory
mode, it always declares in the control interface's baInterfaceNr array
that interfaces 0 and 1 belong to the audio function.  However, the
accessory interface itself, if also enabled, already is at index 0 and
shifts the actual audio interface numbers to 1 and 2, which prevents the
PCM streaming interface from being seen by the host driver.

To get the PCM interface interface to work, detect when the descriptors
point to the (for this driver useless) accessory interface, and redirect
to the correct one.

Reported-by: Jeremy Rosen <jeremy.rosen@openwide.fr>
Tested-by: Jeremy Rosen <jeremy.rosen@openwide.fr>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoALSA: usb-audio: Fix invalid volume resolution for Logitech HD Webcam c310
Takashi Iwai [Mon, 17 Jun 2013 08:25:02 +0000]
ALSA: usb-audio: Fix invalid volume resolution for Logitech HD Webcam c310

commit 36691e1be6ec551eef4a5225f126a281f8c051c2 upstream.

Just like the previous fix for LogitechHD Webcam c270 in commit
11e7064f35bb87da8f427d1aa4bbd8b7473a3993, c310 model also requires the
same workaround for avoiding the kernel warning.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=59741
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoLinux 3.4.50
Greg Kroah-Hartman [Thu, 20 Jun 2013 18:59:06 +0000]
Linux 3.4.50

6 years agopowerpc: Fix missing/delayed calls to irq_work
Benjamin Herrenschmidt [Sat, 15 Jun 2013 02:13:40 +0000]
powerpc: Fix missing/delayed calls to irq_work

commit 230b3034793247f61e6a0b08c44cf415f6d92981 upstream.

When replaying interrupts (as a result of the interrupt occurring
while soft-disabled), in the case of the decrementer, we are exclusively
testing for a pending timer target. However we also use decrementer
interrupts to trigger the new "irq_work", which in this case would
be missed.

This change the logic to force a replay in both cases of a timer
boundary reached and a decrementer interrupt having actually occurred
while disabled. The former test is still useful to catch cases where
a CPU having been hard-disabled for a long time completely misses the
interrupt due to a decrementer rollover.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Tested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agopowerpc: Fix stack overflow crash in resume_kernel when ftracing
Michael Ellerman [Thu, 13 Jun 2013 11:04:56 +0000]
powerpc: Fix stack overflow crash in resume_kernel when ftracing

commit 0e37739b1c96d65e6433998454985de994383019 upstream.

It's possible for us to crash when running with ftrace enabled, eg:

  Bad kernel stack pointer bffffd12 at c00000000000a454
  cpu 0x3: Vector: 300 (Data Access) at [c00000000ffe3d40]
      pc: c00000000000a454: resume_kernel+0x34/0x60
      lr: c00000000000335c: performance_monitor_common+0x15c/0x180
      sp: bffffd12
     msr: 8000000000001032
     dar: bffffd12
   dsisr: 42000000

If we look at current's stack (paca->__current->stack) we see it is
equal to c0000002ecab0000. Our stack is 16K, and comparing to
paca->kstack (c0000002ecab3e30) we can see that we have overflowed our
kernel stack. This leads to us writing over our struct thread_info, and
in this case we have corrupted thread_info->flags and set
_TIF_EMULATE_STACK_STORE.

Dumping the stack we see:

  3:mon> t c0000002ecab0000
  [c0000002ecab0000] c00000000002131c .performance_monitor_exception+0x5c/0x70
  [c0000002ecab0080] c00000000000335c performance_monitor_common+0x15c/0x180
  --- Exception: f01 (Performance Monitor) at c0000000000fb2ec .trace_hardirqs_off+0x1c/0x30
  [c0000002ecab0370] c00000000016fdb0 .trace_graph_entry+0xb0/0x280 (unreliable)
  [c0000002ecab0410] c00000000003d038 .prepare_ftrace_return+0x98/0x130
  [c0000002ecab04b0] c00000000000a920 .ftrace_graph_caller+0x14/0x28
  [c0000002ecab0520] c0000000000d6b58 .idle_cpu+0x18/0x90
  [c0000002ecab05a0] c00000000000a934 .return_to_handler+0x0/0x34
  [c0000002ecab0620] c00000000001e660 .timer_interrupt+0x160/0x300
  [c0000002ecab06d0] c0000000000025dc decrementer_common+0x15c/0x180
  --- Exception: 901 (Decrementer) at c0000000000104d4 .arch_local_irq_restore+0x74/0xa0
  [c0000002ecab09c0] c0000000000fe044 .trace_hardirqs_on+0x14/0x30 (unreliable)
  [c0000002ecab0fb0] c00000000016fe3c .trace_graph_entry+0x13c/0x280
  [c0000002ecab1050] c00000000003d038 .prepare_ftrace_return+0x98/0x130
  [c0000002ecab10f0] c00000000000a920 .ftrace_graph_caller+0x14/0x28
  [c0000002ecab1160] c0000000000161f0 .__ppc64_runlatch_on+0x10/0x40
  [c0000002ecab11d0] c00000000000a934 .return_to_handler+0x0/0x34
  --- Exception: 901 (Decrementer) at c0000000000104d4 .arch_local_irq_restore+0x74/0xa0

  ... and so on

__ppc64_runlatch_on() is called from RUNLATCH_ON in the exception entry
path. At that point the irq state is not consistent, ie. interrupts are
hard disabled (by the exception entry), but the paca soft-enabled flag
may be out of sync.

This leads to the local_irq_restore() in trace_graph_entry() actually
enabling interrupts, which we do not want. Because we have not yet
reprogrammed the decrementer we immediately take another decrementer
exception, and recurse.

The fix is twofold. Firstly make sure we call DISABLE_INTS before
calling RUNLATCH_ON. The badly named DISABLE_INTS actually reconciles
the irq state in the paca with the hardware, making it safe again to
call local_irq_save/restore().

Although that should be sufficient to fix the bug, we also mark the
runlatch routines as notrace. They are called very early in the
exception entry and we are asking for trouble tracing them. They are
also fairly uninteresting and tracing them just adds unnecessary
overhead.

[ This regression was introduced by fe1952fc0afb9a2e4c79f103c08aef5d13db1873
  "powerpc: Rework runlatch code" by myself --BenH
]

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoceph: fix statvfs fr_size
Sage Weil [Fri, 22 Feb 2013 23:31:00 +0000]
ceph: fix statvfs fr_size

commit 92a49fb0f79f3300e6e50ddf56238e70678e4202 upstream.

Different versions of glibc are broken in different ways, but the short of
it is that for the time being, frsize should == bsize, and be used as the
multiple for the blocks, free, and available fields.  This mirrors what is
done for NFS.  The previous reporting of the page size for frsize meant
that newer glibc and df would report a very small value for the fs size.

Fixes http://tracker.ceph.com/issues/3793.

Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Greg Farnum <greg@inktank.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agolibceph: wrap auth methods in a mutex
Sage Weil [Mon, 25 Mar 2013 17:26:30 +0000]
libceph: wrap auth methods in a mutex

commit e9966076cdd952e19f2dd4854cd719be0d7cbebc upstream.

The auth code is called from a variety of contexts, include the mon_client
(protected by the monc's mutex) and the messenger callbacks (currently
protected by nothing).  Avoid chaos by protecting all auth state with a
mutex.  Nothing is blocking, so this should be simple and lightweight.

Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agolibceph: wrap auth ops in wrapper functions
Sage Weil [Mon, 25 Mar 2013 17:26:14 +0000]
libceph: wrap auth ops in wrapper functions

commit 27859f9773e4a0b2042435b13400ee2c891a61f4 upstream.

Use wrapper functions that check whether the auth op exists so that callers
do not need a bunch of conditional checks.  Simplifies the external
interface.

Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agolibceph: add update_authorizer auth method
Sage Weil [Mon, 25 Mar 2013 17:26:01 +0000]
libceph: add update_authorizer auth method

commit 0bed9b5c523d577378b6f83eab5835fe30c27208 upstream.

Currently the messenger calls out to a get_authorizer con op, which will
create a new authorizer if it doesn't yet have one.  In the meantime, when
we rotate our service keys, the authorizer doesn't get updated.  Eventually
it will be rejected by the server on a new connection attempt and get
invalidated, and we will then rebuild a new authorizer, but this is not
ideal.

Instead, if we do have an authorizer, call a new update_authorizer op that
will verify that the current authorizer is using the latest secret.  If it
is not, we will build a new one that does.  This avoids the transient
failure.

This fixes one of the sorry sequence of events for bug

http://tracker.ceph.com/issues/4282

Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agolibceph: fix authorizer invalidation
Sage Weil [Mon, 25 Mar 2013 17:25:49 +0000]
libceph: fix authorizer invalidation

commit 4b8e8b5d78b8322351d44487c1b76f7e9d3412bc upstream.

We were invalidating the authorizer by removing the ticket handler
entirely.  This was effective in inducing us to request a new authorizer,
but in the meantime it mean that any authorizer we generated would get a
new and initialized handler with secret_id=0, which would always be
rejected by the server side with a confusing error message:

 auth: could not find secret_id=0
 cephx: verify_authorizer could not get service secret for service osd secret_id=0

Instead, simply clear the validity field.  This will still induce the auth
code to request a new secret, but will let us continue to use the old
ticket in the meantime.  The messenger code will probably continue to fail,
but the exponential backoff will kick in, and eventually the we will get a
new (hopefully more valid) ticket from the mon and be able to continue.

Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agolibceph: clear messenger auth_retry flag when we authenticate
Sage Weil [Mon, 25 Mar 2013 16:30:13 +0000]
libceph: clear messenger auth_retry flag when we authenticate

commit 20e55c4cc758e4dccdfd92ae8e9588dd624b2cd7 upstream.

We maintain a counter of failed auth attempts to allow us to retry once
before failing.  However, if the second attempt succeeds, the flag isn't
cleared, which makes us think auth failed again later when the connection
resets for other reasons (like a socket error).

This is one part of the sorry sequence of events in bug

http://tracker.ceph.com/issues/4282

Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agox86: Fix typo in kexec register clearing
Kees Cook [Wed, 5 Jun 2013 18:47:18 +0000]
x86: Fix typo in kexec register clearing

commit c8a22d19dd238ede87aa0ac4f7dbea8da039b9c1 upstream.

Fixes a typo in register clearing code. Thanks to PaX Team for fixing
this originally, and James Troup for pointing it out.

Signed-off-by: Kees Cook <keescook@chromium.org>
Link: http://lkml.kernel.org/r/20130605184718.GA8396@www.outflux.net
Cc: PaX Team <pageexec@freemail.hu>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agomm: migration: add migrate_entry_wait_huge()
Naoya Horiguchi [Wed, 12 Jun 2013 21:05:04 +0000]
mm: migration: add migrate_entry_wait_huge()

commit 30dad30922ccc733cfdbfe232090cf674dc374dc upstream.

When we have a page fault for the address which is backed by a hugepage
under migration, the kernel can't wait correctly and do busy looping on
hugepage fault until the migration finishes.  As a result, users who try
to kick hugepage migration (via soft offlining, for example) occasionally
experience long delay or soft lockup.

This is because pte_offset_map_lock() can't get a correct migration entry
or a correct page table lock for hugepage.  This patch introduces
migration_entry_wait_huge() to solve this.

Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agomd/raid1: consider WRITE as successful only if at least one non-Faulty and non-rebuil...
Alex Lyakas [Tue, 4 Jun 2013 17:42:21 +0000]
md/raid1: consider WRITE as successful only if at least one non-Faulty and non-rebuilding drive completed it.

commit 3056e3aec8d8ba61a0710fb78b2d562600aa2ea7 upstream.

Without that fix, the following scenario could happen:

- RAID1 with drives A and B; drive B was freshly-added and is rebuilding
- Drive A fails
- WRITE request arrives to the array. It is failed by drive A, so
r1_bio is marked as R1BIO_WriteError, but the rebuilding drive B
succeeds in writing it, so the same r1_bio is marked as
R1BIO_Uptodate.
- r1_bio arrives to handle_write_finished, badblocks are disabled,
md_error()->error() does nothing because we don't fail the last drive
of raid1
- raid_end_bio_io()  calls call_bio_endio()
- As a result, in call_bio_endio():
        if (!test_bit(R1BIO_Uptodate, &r1_bio->state))
                clear_bit(BIO_UPTODATE, &bio->bi_flags);
this code doesn't clear the BIO_UPTODATE flag, and the whole master
WRITE succeeds, back to the upper layer.

So we returned success to the upper layer, even though we had written
the data onto the rebuilding drive only. But when we want to read the
data back, we would not read from the rebuilding drive, so this data
is lost.

[neilb - applied identical change to raid10 as well]

This bug can result in lost data, so it is suitable for any
-stable kernel.

Signed-off-by: Alex Lyakas <alex@zadarastorage.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoswap: avoid read_swap_cache_async() race to deadlock while waiting on discard I/O...
Rafael Aquini [Wed, 12 Jun 2013 21:04:49 +0000]
swap: avoid read_swap_cache_async() race to deadlock while waiting on discard I/O completion

commit cbab0e4eec299e9059199ebe6daf48730be46d2b upstream.

read_swap_cache_async() can race against get_swap_page(), and stumble
across a SWAP_HAS_CACHE entry in the swap map whose page wasn't brought
into the swapcache yet.

This transient swap_map state is expected to be transitory, but the
actual placement of discard at scan_swap_map() inserts a wait for I/O
completion thus making the thread at read_swap_cache_async() to loop
around its -EEXIST case, while the other end at get_swap_page() is
scheduled away at scan_swap_map().  This can leave the system deadlocked
if the I/O completion happens to be waiting on the CPU waitqueue where
read_swap_cache_async() is busy looping and !CONFIG_PREEMPT.

This patch introduces a cond_resched() call to make the aforementioned
read_swap_cache_async() busy loop condition to bail out when necessary,
thus avoiding the subtle race window.

Signed-off-by: Rafael Aquini <aquini@redhat.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Shaohua Li <shli@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agodrm/i915: prefer VBT modes for SVDO-LVDS over EDID
Daniel Vetter [Mon, 10 Jun 2013 07:47:58 +0000]
drm/i915: prefer VBT modes for SVDO-LVDS over EDID

commit c3456fb3e4712d0448592af3c5d644c9472cd3c1 upstream.

In

commit 53d3b4d7778daf15900867336c85d3f8dd70600c
Author: Egbert Eich <eich@suse.de>
Date:   Tue Jun 4 17:13:21 2013 +0200

    drm/i915/sdvo: Use &intel_sdvo->ddc instead of intel_sdvo->i2c for DDC

Egbert Eich fixed a long-standing bug where we simply used a
non-working i2c controller to read the EDID for SDVO-LVDS panels.
Unfortunately some machines seem to not be able to cope with the mode
provided in the EDID. Specifically they seem to not be able to cope
with a 4x pixel mutliplier instead of a 2x one, which seems to have
been worked around by slightly changing the panels native mode in the
VBT so that the dotclock is just barely above 50MHz.

Since it took forever to notice the breakage it's fairly safe to
assume that at least for SDVO-LVDS panels the VBT contains fairly sane
data. So just switch around the order and use VBT modes first.

v2: Also add EDID modes just in case, and spell Egbert correctly.

v3: Elaborate a bit more about what's going on on Chris' machine.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=65524
Reported-and-tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Egbert Eich <eich@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agocciss: fix broken mutex usage in ioctl
Stephen M. Cameron [Wed, 12 Jun 2013 21:04:47 +0000]
cciss: fix broken mutex usage in ioctl

commit 03f47e888daf56c8e9046c674719a0bcc644eed5 upstream.

If a new logical drive is added and the CCISS_REGNEWD ioctl is invoked
(as is normal with the Array Configuration Utility) the process will
hang as below.  It attempts to acquire the same mutex twice, once in
do_ioctl() and once in cciss_unlocked_open().  The BKL was recursive,
the mutex isn't.

  Linux version 3.10.0-rc2 (scameron@localhost.localdomain) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-3) (GCC) ) #1 SMP Fri May 24 14:32:12 CDT 2013
  [...]
  acu             D 0000000000000001     0  3246   3191 0x00000080
  Call Trace:
    schedule+0x29/0x70
    schedule_preempt_disabled+0xe/0x10
    __mutex_lock_slowpath+0x17b/0x220
    mutex_lock+0x2b/0x50
    cciss_unlocked_open+0x2f/0x110 [cciss]
    __blkdev_get+0xd3/0x470
    blkdev_get+0x5c/0x1e0
    register_disk+0x182/0x1a0
    add_disk+0x17c/0x310
    cciss_add_disk+0x13a/0x170 [cciss]
    cciss_update_drive_info+0x39b/0x480 [cciss]
    rebuild_lun_table+0x258/0x370 [cciss]
    cciss_ioctl+0x34f/0x470 [cciss]
    do_ioctl+0x49/0x70 [cciss]
    __blkdev_driver_ioctl+0x28/0x30
    blkdev_ioctl+0x200/0x7b0
    block_ioctl+0x3c/0x40
    do_vfs_ioctl+0x89/0x350
    SyS_ioctl+0xa1/0xb0
    system_call_fastpath+0x16/0x1b

This mutex usage was added into the ioctl path when the big kernel lock
was removed.  As it turns out, these paths are all thread safe anyway
(or can easily be made so) and we don't want ioctl() to be single
threaded in any case.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Mike Miller <mike.miller@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoreboot: rigrate shutdown/reboot to boot cpu
Robin Holt [Wed, 12 Jun 2013 21:04:37 +0000]
reboot: rigrate shutdown/reboot to boot cpu

commit cf7df378aa4ff7da3a44769b7ff6e9eef1a9f3db upstream.

We recently noticed that reboot of a 1024 cpu machine takes approx 16
minutes of just stopping the cpus.  The slowdown was tracked to commit
f96972f2dc63 ("kernel/sys.c: call disable_nonboot_cpus() in
kernel_restart()").

The current implementation does all the work of hot removing the cpus
before halting the system.  We are switching to just migrating to the
boot cpu and then continuing with shutdown/reboot.

This also has the effect of not breaking x86's command line parameter
for specifying the reboot cpu.  Note, this code was shamelessly copied
from arch/x86/kernel/reboot.c with bits removed pertaining to the
reboot_cpu command line parameter.

Signed-off-by: Robin Holt <holt@sgi.com>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Cc: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Russ Anderson <rja@sgi.com>
Cc: Robin Holt <holt@sgi.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoCPU hotplug: provide a generic helper to disable/enable CPU hotplug
Srivatsa S. Bhat [Wed, 12 Jun 2013 21:04:36 +0000]
CPU hotplug: provide a generic helper to disable/enable CPU hotplug

commit 16e53dbf10a2d7e228709a7286310e629ede5e45 upstream.

There are instances in the kernel where we would like to disable CPU
hotplug (from sysfs) during some important operation.  Today the freezer
code depends on this and the code to do it was kinda tailor-made for
that.

Restructure the code and make it generic enough to be useful for other
usecases too.

Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Robin Holt <holt@sgi.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Russ Anderson <rja@sgi.com>
Cc: Robin Holt <holt@sgi.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoath9k: Use minstrel rate control by default
Sujith Manoharan [Thu, 6 Jun 2013 04:36:29 +0000]
ath9k: Use minstrel rate control by default

commit 5efac94999ff218e0101f67a059e44abb4b0b523 upstream.

The ath9k rate control algorithm has various architectural
issues that make it a poor fit in scenarios like congested
environments etc.

An example: https://bugzilla.redhat.com/show_bug.cgi?id=927191

Change the default to minstrel which is more robust in such cases.
The ath9k RC code is left in the driver for now, maybe it can
be removed altogether later on.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Cc: Jouni Malinen <jouni@qca.qualcomm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoath9k: Disable PowerSave by default
Sujith Manoharan [Sat, 1 Jun 2013 01:38:09 +0000]
ath9k: Disable PowerSave by default

commit 531671cb17af07281e6f28c1425f754346e65c41 upstream.

Almost all the DMA issues which have plagued ath9k (in station mode)
for years are related to PS. Disabling PS usually "fixes" the user's
connection stablility. Reports of DMA problems are still trickling in
and are sitting in the kernel bugzilla. Until the PS code in ath9k is
given a thorough review, disbale it by default. The slight increase
in chip power consumption is a small price to pay for improved link
stability.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoBluetooth: Fix mgmt handling of power on failures
Johan Hedberg [Wed, 29 May 2013 06:51:29 +0000]
Bluetooth: Fix mgmt handling of power on failures

commit 96570ffcca0b872dc8626e97569d2697f374d868 upstream.

If hci_dev_open fails we need to ensure that the corresponding
mgmt_set_powered command gets an appropriate response. This patch fixes
the missing response by adding a new mgmt_set_powered_failed function
that's used to indicate a power on failure to mgmt. Since a situation
with the device being rfkilled may require special handling in user
space the patch uses a new dedicated mgmt status code for this.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agodrm/gma500/cdv: Unpin framebuffer on crtc disable
Patrik Jakobsson [Sat, 8 Jun 2013 18:23:08 +0000]
drm/gma500/cdv: Unpin framebuffer on crtc disable

commit 22e7c385a80d771aaf3a15ae7ccea3b0686bbe10 upstream.

The framebuffer needs to be unpinned in the crtc->disable callback
because of previous pinning in psb_intel_pipe_set_base(). This will fix
a memory leak where the framebuffer was released but not unpinned
properly. This patch only affects Cedarview.

Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=889511
Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=812113
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agodrm/gma500/psb: Unpin framebuffer on crtc disable
Patrik Jakobsson [Wed, 5 Jun 2013 12:24:01 +0000]
drm/gma500/psb: Unpin framebuffer on crtc disable

commit 820de86a90089ee607d7864538c98a23b503c846 upstream.

The framebuffer needs to be unpinned in the crtc->disable callback
because of previous pinning in psb_intel_pipe_set_base(). This will fix
a memory leak where the framebuffer was released but not unpinned
properly. This patch only affects Poulsbo.

Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=889511
Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=812113
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agodrivers/rtc/rtc-twl.c: fix missing device_init_wakeup() when booted with device tree
Tony Lindgren [Wed, 12 Jun 2013 21:04:48 +0000]
drivers/rtc/rtc-twl.c: fix missing device_init_wakeup() when booted with device tree

commit 24b8256a1fb28d357bc6fa09184ba29b4255ba5c upstream.

When booted in legacy mode device_init_wakeup() gets called by
drivers/mfd/twl-core.c when the children are initialized.  However, when
booted using device tree, the children are created with
of_platform_populate() instead add_children().

This means that the RTC driver will not have device_init_wakeup() set,
and we need to call it from the driver probe like RTC drivers typically
do.

Without this we cannot test PM wake-up events on omaps for cases where
there may not be any physical wake-up event.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Reported-by: Kevin Hilman <khilman@linaro.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoceph: ceph_pagelist_append might sleep while atomic
Jim Schutt [Wed, 15 May 2013 18:03:35 +0000]
ceph: ceph_pagelist_append might sleep while atomic

commit 39be95e9c8c0b5668c9f8806ffe29bf9f4bc0f40 upstream.

Ceph's encode_caps_cb() worked hard to not call __page_cache_alloc()
while holding a lock, but it's spoiled because ceph_pagelist_addpage()
always calls kmap(), which might sleep.  Here's the result:

[13439.295457] ceph: mds0 reconnect start
[13439.300572] BUG: sleeping function called from invalid context at include/linux/highmem.h:58
[13439.309243] in_atomic(): 1, irqs_disabled(): 0, pid: 12059, name: kworker/1:1
    . . .
[13439.376225] Call Trace:
[13439.378757]  [<ffffffff81076f4c>] __might_sleep+0xfc/0x110
[13439.384353]  [<ffffffffa03f4ce0>] ceph_pagelist_append+0x120/0x1b0 [libceph]
[13439.391491]  [<ffffffffa0448fe9>] ceph_encode_locks+0x89/0x190 [ceph]
[13439.398035]  [<ffffffff814ee849>] ? _raw_spin_lock+0x49/0x50
[13439.403775]  [<ffffffff811cadf5>] ? lock_flocks+0x15/0x20
[13439.409277]  [<ffffffffa045e2af>] encode_caps_cb+0x41f/0x4a0 [ceph]
[13439.415622]  [<ffffffff81196748>] ? igrab+0x28/0x70
[13439.420610]  [<ffffffffa045e9f8>] ? iterate_session_caps+0xe8/0x250 [ceph]
[13439.427584]  [<ffffffffa045ea25>] iterate_session_caps+0x115/0x250 [ceph]
[13439.434499]  [<ffffffffa045de90>] ? set_request_path_attr+0x2d0/0x2d0 [ceph]
[13439.441646]  [<ffffffffa0462888>] send_mds_reconnect+0x238/0x450 [ceph]
[13439.448363]  [<ffffffffa0464542>] ? ceph_mdsmap_decode+0x5e2/0x770 [ceph]
[13439.455250]  [<ffffffffa0462e42>] check_new_map+0x352/0x500 [ceph]
[13439.461534]  [<ffffffffa04631ad>] ceph_mdsc_handle_map+0x1bd/0x260 [ceph]
[13439.468432]  [<ffffffff814ebc7e>] ? mutex_unlock+0xe/0x10
[13439.473934]  [<ffffffffa043c612>] extra_mon_dispatch+0x22/0x30 [ceph]
[13439.480464]  [<ffffffffa03f6c2c>] dispatch+0xbc/0x110 [libceph]
[13439.486492]  [<ffffffffa03eec3d>] process_message+0x1ad/0x1d0 [libceph]
[13439.493190]  [<ffffffffa03f1498>] ? read_partial_message+0x3e8/0x520 [libceph]
    . . .
[13439.587132] ceph: mds0 reconnect success
[13490.720032] ceph: mds0 caps stale
[13501.235257] ceph: mds0 recovery completed
[13501.300419] ceph: mds0 caps renewed

Fix it up by encoding locks into a buffer first, and when the number
of encoded locks is stable, copy that into a ceph_pagelist.

[elder@inktank.com: abbreviated the stack info a bit.]

Signed-off-by: Jim Schutt <jaschut@sandia.gov>
Reviewed-by: Alex Elder <elder@inktank.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoceph: add cpu_to_le32() calls when encoding a reconnect capability
Jim Schutt [Wed, 15 May 2013 18:03:35 +0000]
ceph: add cpu_to_le32() calls when encoding a reconnect capability

commit c420276a532a10ef59849adc2681f45306166b89 upstream.

In his review, Alex Elder mentioned that he hadn't checked that
num_fcntl_locks and num_flock_locks were properly decoded on the
server side, from a le32 over-the-wire type to a cpu type.
I checked, and AFAICS it is done; those interested can consult
    Locker::_do_cap_update()
in src/mds/Locker.cc and src/include/encoding.h in the Ceph server
code (git://github.com/ceph/ceph).

I also checked the server side for flock_len decoding, and I believe
that also happens correctly, by virtue of having been declared
__le32 in struct ceph_mds_cap_reconnect, in src/include/ceph_fs.h.

Signed-off-by: Jim Schutt <jaschut@sandia.gov>
Reviewed-by: Alex Elder <elder@inktank.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agolibceph: must hold mutex for reset_changed_osds()
Alex Elder [Wed, 15 May 2013 21:28:33 +0000]
libceph: must hold mutex for reset_changed_osds()

commit 14d2f38df67fadee34625fcbd282ee22514c4846 upstream.

An osd client has a red-black tree describing its osds, and
occasionally we would get crashes due to one of these trees tree
becoming corrupt somehow.

The problem turned out to be that reset_changed_osds() was being
called without protection of the osd client request mutex.  That
function would call __reset_osd() for any osd that had changed, and
__reset_osd() would call __remove_osd() for any osd with no
outstanding requests, and finally __remove_osd() would remove the
corresponding entry from the red-black tree.  Thus, the tree was
getting modified without having any lock protection, and was
vulnerable to problems due to concurrent updates.

This appears to be the only osd tree updating path that has this
problem.  It can be fairly easily fixed by moving the call up
a few lines, to just before the request mutex gets dropped
in kick_requests().

This resolves:
    http://tracker.ceph.com/issues/5043

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agob43: stop format string leaking into error msgs
Kees Cook [Fri, 10 May 2013 21:48:21 +0000]
b43: stop format string leaking into error msgs

commit e0e29b683d6784ef59bbc914eac85a04b650e63c upstream.

The module parameter "fwpostfix" is userspace controllable, unfiltered,
and is used to define the firmware filename. b43_do_request_fw() populates
ctx->errors[] on error, containing the firmware filename. b43err()
parses its arguments as a format string. For systems with b43 hardware,
this could lead to a uid-0 to ring-0 escalation.

CVE-2013-2852

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoLinux 3.4.49
Greg Kroah-Hartman [Thu, 13 Jun 2013 16:48:06 +0000]
Linux 3.4.49

6 years agoftrace: Move ftrace_filter_lseek out of CONFIG_DYNAMIC_FTRACE section
Steven Rostedt [Fri, 7 Jun 2013 09:02:08 +0000]
ftrace: Move ftrace_filter_lseek out of CONFIG_DYNAMIC_FTRACE section

commit 7f49ef69db6bbf756c0abca7e9b65b32e999eec8 upstream.

As ftrace_filter_lseek is now used with ftrace_pid_fops, it needs to
be moved out of the #ifdef CONFIG_DYNAMIC_FTRACE section as the
ftrace_pid_fops is defined when DYNAMIC_FTRACE is not.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Namhyung Kim <namhyung@kernel.org>
[ lizf: adjust context ]
Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agotracing: Fix possible NULL pointer dereferences
Namhyung Kim [Fri, 7 Jun 2013 09:01:16 +0000]
tracing: Fix possible NULL pointer dereferences

commit 6a76f8c0ab19f215af2a3442870eeb5f0e81998d upstream.

Currently set_ftrace_pid and set_graph_function files use seq_lseek
for their fops.  However seq_open() is called only for FMODE_READ in
the fops->open() so that if an user tries to seek one of those file
when she open it for writing, it sees NULL seq_file and then panic.

It can be easily reproduced with following command:

  $ cd /sys/kernel/debug/tracing
  $ echo 1234 | sudo tee -a set_ftrace_pid

In this example, GNU coreutils' tee opens the file with fopen(, "a")
and then the fopen() internally calls lseek().

Link:
http://lkml.kernel.org/r/1365663302-2170-1-git-send-email-namhyung@kernel.org

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
[ lizf: adjust context ]
Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agodrm/gma500: Increase max resolution for mode setting
Patrik Jakobsson [Thu, 25 Apr 2013 20:23:36 +0000]
drm/gma500: Increase max resolution for mode setting

commit cbbd379aa43890f36da934f5af619d2fb8ec3d87 upstream.

By having a higher max resolution we can now set up a virtual
framebuffer that spans several monitors. 4096 should be ok since we're
gen 3 or higher and should be enough for most dual head setups.

Bugzilla:
https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-modesetting/+bug/1169147
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoUSB: ftdi_sio: Quiet sparse noise about using plain integer was NULL pointer
Ying Xue [Mon, 6 Aug 2012 09:46:37 +0000]
USB: ftdi_sio: Quiet sparse noise about using plain integer was NULL pointer

commit a816e3113b63753c330ca4751ea1d208e93e3015 upstream.

Pointers should not be compared to plain integers.
Quiets the sparse warning:
warning: Using plain integer as NULL pointer

Signed-off-by: Ying Xue <ying.xue@windriver.com>
Cc: Lotfi Manseur <lotfi.manseur@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoxen-pciback: rate limit error messages from xen_pcibk_enable_msi{,x}()
Jan Beulich [Wed, 6 Feb 2013 15:30:38 +0000]
xen-pciback: rate limit error messages from xen_pcibk_enable_msi{,x}()

commit 51ac8893a7a51b196501164e645583bf78138699 upstream.

... as being guest triggerable (e.g. by invoking
XEN_PCI_OP_enable_msi{,x} on a device not being MSI/MSI-X capable).

This is CVE-2013-0231 / XSA-43.

Also make the two messages uniform in both their wording and severity.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
[stable tree: Added two extra #include files]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agodrm/i915: no lvds quirk for hp t5740
Ben Mesman [Tue, 16 Apr 2013 18:00:28 +0000]
drm/i915: no lvds quirk for hp t5740

commit 45a211d75137b1ac869a8a758a6667f15827a115 upstream.

Last year, a patch was made for the "HP t5740e Thin Client" (see
http://lists.freedesktop.org/archives/dri-devel/2012-May/023245.html).
This device reports an lvds panel, but does not really have one.

The predecessor of this device is the "hp t5740", which also does not have
an lvds panel. This patch will add the same quirk for this device.

Signed-off-by: Ben Mesman <ben@bnc.nl>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agodrm/i915/sdvo: Use &intel_sdvo->ddc instead of intel_sdvo->i2c for DDC.
Egbert Eich [Tue, 4 Jun 2013 15:13:21 +0000]
drm/i915/sdvo: Use &intel_sdvo->ddc instead of intel_sdvo->i2c for DDC.

commit 53d3b4d7778daf15900867336c85d3f8dd70600c upstream.

In intel_sdvo_get_lvds_modes() the wrong i2c adapter record is used
for DDC. Thus the code will always have to rely on a LVDS panel
mode supplied by VBT.
In most cases this succeeds, so this didn't get detected for quite
a while.

This regression seems to have been introduced in

commit f899fc64cda8569d0529452aafc0da31c042df2e
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Tue Jul 20 15:44:45 2010 -0700

    drm/i915: use GMBUS to manage i2c links

Signed-off-by: Egbert Eich <eich@suse.de>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: Add note about which commit likely introduced this issue.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agodrm: fix a use-after-free when GPU acceleration disabled
Huacai Chen [Tue, 21 May 2013 06:23:43 +0000]
drm: fix a use-after-free when GPU acceleration disabled

commit b7ea85a4fed37835eec78a7be3039c8dc22b8178 upstream.

When GPU acceleration is disabled, drm_vblank_cleanup() will free the
vblank-related data, such as vblank_refcount, vblank_inmodeset, etc.
But we found that drm_vblank_post_modeset() may be called after the
cleanup, which use vblank_refcount and vblank_inmodeset. And this will
cause a kernel panic.

Fix this by return immediately if dev->num_crtcs is zero. This is the
same thing that drm_vblank_pre_modeset() does.

Call trace of a drm_vblank_post_modeset() after drm_vblank_cleanup():
[   62.628906] [<ffffffff804868d0>] drm_vblank_post_modeset+0x34/0xb4
[   62.628906] [<ffffffff804c7008>] atombios_crtc_dpms+0xb4/0x174
[   62.628906] [<ffffffff804c70e0>] atombios_crtc_commit+0x18/0x38
[   62.628906] [<ffffffff8047f038>] drm_crtc_helper_set_mode+0x304/0x3cc
[   62.628906] [<ffffffff8047f92c>] drm_crtc_helper_set_config+0x6d8/0x988
[   62.628906] [<ffffffff8047dd40>] drm_fb_helper_set_par+0x94/0x104
[   62.628906] [<ffffffff80439d14>] fbcon_init+0x424/0x57c
[   62.628906] [<ffffffff8046a638>] visual_init+0xb8/0x118
[   62.628906] [<ffffffff8046b9f8>] take_over_console+0x238/0x384
[   62.628906] [<ffffffff80436df8>] fbcon_takeover+0x7c/0xdc
[   62.628906] [<ffffffff8024fa20>] notifier_call_chain+0x44/0x94
[   62.628906] [<ffffffff8024fcbc>] __blocking_notifier_call_chain+0x48/0x68
[   62.628906] [<ffffffff8042d990>] register_framebuffer+0x228/0x260
[   62.628906] [<ffffffff8047e010>] drm_fb_helper_single_fb_probe+0x260/0x314
[   62.628906] [<ffffffff8047e2c4>] drm_fb_helper_initial_config+0x200/0x234
[   62.628906] [<ffffffff804e5560>] radeon_fbdev_init+0xd4/0xf4
[   62.628906] [<ffffffff804e0e08>] radeon_modeset_init+0x9bc/0xa18
[   62.628906] [<ffffffff804bfc14>] radeon_driver_load_kms+0xdc/0x12c
[   62.628906] [<ffffffff8048b548>] drm_get_pci_dev+0x148/0x238
[   62.628906] [<ffffffff80423564>] local_pci_probe+0x5c/0xd0
[   62.628906] [<ffffffff80241ac4>] work_for_cpu_fn+0x1c/0x30
[   62.628906] [<ffffffff802427c8>] process_one_work+0x274/0x3bc
[   62.628906] [<ffffffff80242934>] process_scheduled_works+0x24/0x44
[   62.628906] [<ffffffff8024515c>] worker_thread+0x31c/0x3f4
[   62.628906] [<ffffffff802497a8>] kthread+0x88/0x90
[   62.628906] [<ffffffff80206794>] kernel_thread_helper+0x10/0x18

Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Binbin Zhou <zhoubb@lemote.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Acked-by: Paul Menzel <paulepanter@users.sourceforge.net>
Signed-off-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agohwmon: (adm1021) Strengthen chip detection for ADM1021, LM84 and MAX1617
Guenter Roeck [Wed, 5 Jun 2013 21:09:30 +0000]
hwmon: (adm1021) Strengthen chip detection for ADM1021, LM84 and MAX1617

commit 591bfcfc334a003ba31c0deff03b22e73349939b upstream.

On a system with both MAX1617 and JC42 sensors, JC42 sensors can be misdetected
as LM84. Strengthen detection sufficiently enough to avoid this misdetection.
Also improve detection for ADM1021.

Modeled after chip detection code in sensors-detect command.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agodrm/radeon: don't allow audio on DCE6
Alex Deucher [Mon, 3 Jun 2013 14:32:40 +0000]
drm/radeon: don't allow audio on DCE6

commit 1cbcca302a318499f20a512847c5d6a510c08c35 upstream.

It's not supported yet.  Fixes display issues when
users force it on.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoradeon: Fix system hang issue when using KMS with older cards
Adis Hamzić [Sun, 2 Jun 2013 14:47:54 +0000]
radeon: Fix system hang issue when using KMS with older cards

commit e49f3959a96dc279860af7e86e6dbcfda50580a5 upstream.

The current radeon driver initialization routines, when using KMS, are written
so that the IRQ installation routine is called before initializing the WB buffer
and the CP rings. With some ASICs, though, the IRQ routine tries to access the
GFX_INDEX ring causing a call to RREG32 with the value of -1 in
radeon_fence_read. This, in turn causes the system to completely hang with some
cards, requiring a hard reset.

A call stack that can cause such a hang looks like this (using rv515 ASIC for the
example here):
 * rv515_init (rv515.c)
 * radeon_irq_kms_init (radeon_irq_kms.c)
 * drm_irq_install (drm_irq.c)
 * radeon_driver_irq_preinstall_kms (radeon_irq_kms.c)
 * rs600_irq_process (rs600.c)
 * radeon_fence_process - due to SW interrupt (radeon_fence.c)
 * radeon_fence_read (radeon_fence.c)
 * hang due to RREG32(-1)

The patch moves the IRQ installation to the card startup routine, after the ring
has been initialized, but before the IRQ has been set. This fixes the issue, but
requires a check to see if the IRQ is already installed, as is the case in the
system resume codepath.
I have tested the patch on three machines using the rv515, the rv770 and the
evergreen ASIC. They worked without issues.

This seems to be a known issue and has been reported on several bug tracking
sites by various distributions (see links below). Most of reports recommend
booting the system with KMS disabled and then enabling KMS by reloading the
radeon module. For some reason, this was indeed a usable workaround, however,
UMS is now deprecated and disabled by default.

Bug reports:
https://bugzilla.redhat.com/show_bug.cgi?id=845745
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/561789
https://bbs.archlinux.org/viewtopic.php?id=156964

Signed-off-by: Adis Hamzić <adis@hamzadis.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

6 years agopowerpc/eeh: Don't check RTAS token to get PE addr
Gavin Shan [Wed, 5 Jun 2013 14:25:50 +0000]
powerpc/eeh: Don't check RTAS token to get PE addr

commit b8b3de224f194005ad87ede6fd022fcc2bef3b1a upstream.

RTAS token "ibm,get-config-addr-info" or ibm,get-config-addr-info2"
are used to retrieve the PE address according to PCI address, which
made up of domain/bus/slot/function. If we don't have those 2 tokens,
the domain/bus/slot/function would be used as the address for EEH
RTAS operations. Some older f/w might not have those 2 tokens and
that blocks the EEH functionality to be initialized. It was introduced
by commit e2af155c ("powerpc/eeh: pseries platform EEH initialization").

The patch skips the check on those 2 tokens so we can bring up EEH
functionality successfully. And domain/bus/slot/function will be
used as address for EEH RTAS operations.

Reported-by: Robert Knight <knight@princeton.edu>
Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Tested-by: Robert Knight <knight@princeton.edu>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoACPI / video: ignore BIOS initial backlight value for HP Pavilion g6
Ash Willis [Wed, 29 May 2013 01:27:59 +0000]
ACPI / video: ignore BIOS initial backlight value for HP Pavilion g6

commit 780a6ec640a3fed671fc2c40e4dd30c03eca3ac3 upstream.

This patch addresses kernel bug 56661. BIOS reports an incorrect
backlight value, causing the driver to switch off the backlight
completely during startup. This patch ignores the incorrect value from
BIOS.

References: https://bugzilla.kernel.org/show_bug.cgi?id=56661
Signed-off-by: Ash Willis <ashwillis@programmer.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoACPI / video: ignore BIOS initial backlight value for HP m4
Alex Hung [Tue, 28 May 2013 02:05:09 +0000]
ACPI / video: ignore BIOS initial backlight value for HP m4

commit fedbe9bc6fd3e14b1ffbb3dac407777ac4a3650c upstream.

On HP m4 lapops, BIOS reports minimum backlight on boot and
causes backlight to dim completely. This ignores the initial backlight
values and set to max brightness.

References: https://bugs.launchpad.net/bugs/1184501
Signed-off-by: Alex Hung <alex.hung@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoUSB: mos7720: fix hardware flow control
Johan Hovold [Tue, 4 Jun 2013 16:50:31 +0000]
USB: mos7720: fix hardware flow control

commit a26f009a070e840fadacb91013b2391ba7ab6cc2 upstream.

The register access to enable hardware flow control depends on the
device port number and not the port minor number.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoUSB: mos7720: fix message timeouts
Johan Hovold [Mon, 27 May 2013 12:44:43 +0000]
USB: mos7720: fix message timeouts

commit 849513a7809175420d353625b6f651d961e99d49 upstream.

The control and bulk-message timeouts are specified in milliseconds and
should not depend on HZ.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoUSB: mos7720: fix DMA to stack
Johan Hovold [Mon, 27 May 2013 12:44:39 +0000]
USB: mos7720: fix DMA to stack

commit 72ea18a558ed7a63a50bb121ba60d73b5b38ae30 upstream.

The read_mos_reg function is called with stack-allocated buffers, which
must not be used for control messages.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoUSB: revert periodic scheduling bugfix
Alan Stern [Tue, 28 May 2013 18:03:10 +0000]
USB: revert periodic scheduling bugfix

commit fdc03438f53a00294ed9939eb3a1f6db6f3d8963 upstream.

This patch reverts commit 3e619d04159be54b3daa0b7036b0ce9e067f4b5d
(USB: EHCI: fix bug in scheduling periodic split transfers).  The
commit was valid -- it fixed a real bug -- but the periodic scheduler
in ehci-hcd is in such bad shape (especially the part that handles
split transactions) that fixing one bug is very likely to cause
another to surface.  That's what happened in this case; the result was
choppy and noisy playback on certain 24-bit audio devices.

The only real fix will be to rewrite this entire section of code.  My
next project...

This fixes https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1136110.

Thanks to Tim Richardson for extra testing and feedback, and to Joseph
Salisbury and Tyson Tan for tracking down the original source of the
problem.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: Joseph Salisbury <joseph.salisbury@canonical.com>
CC: Tim Richardson <tim@tim-richardson.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoUSB: serial: fix Treo/Kyocera interrrupt-in urb context
Johan Hovold [Mon, 27 May 2013 12:44:37 +0000]
USB: serial: fix Treo/Kyocera interrrupt-in urb context

commit 5f8e2c07d75967ee49a5da1d21ddf5f50d48cda0 upstream.

The first and second interrupt-in urbs are swapped for some Treo/Kyocera
devices, but the urb context was never updated with the new port.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoUSB: whiteheat: fix broken port configuration
Johan Hovold [Thu, 6 Jun 2013 11:32:47 +0000]
USB: whiteheat: fix broken port configuration

commit 9eecf22d2b375b9064a20421c6c307b760b03d46 upstream.

When configuring the port (e.g. set_termios) the port minor number
rather than the port number was used in the request (and they only
coincide for minor number 0).

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoUSB: Serial: cypress_M8: Enable FRWD Dongle hidcom device
Robert Butora [Fri, 31 May 2013 15:09:51 +0000]
USB: Serial: cypress_M8: Enable FRWD Dongle hidcom device

commit 6529591e3eef65f0f528a81ac169f6e294b947a7 upstream.

The patch adds a new HIDCOM device and does not affect other devices
driven by the cypress_M8 module. Changes are:
- add VendorID ProductID to device tables
- skip unstable speed check because FRWD uses 115200bps
- skip reset at probe which is an issue workaround for this
particular device.

Signed-off-by: Robert Butora <robert.butora.fi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoUSB: visor: fix initialisation of Treo/Kyocera devices
Johan Hovold [Mon, 27 May 2013 12:44:38 +0000]
USB: visor: fix initialisation of Treo/Kyocera devices

commit 420021a395ce38b7ab2cceb52dee4038be7d8fa3 upstream.

Fix regression introduced by commit 214916f2e ("USB: visor: reimplement
using generic framework") which broke initialisation of Treo/Kyocera
devices that re-mapped bulk-in endpoints.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoUSB: ark3116: fix control-message timeout
Johan Hovold [Mon, 27 May 2013 12:44:41 +0000]
USB: ark3116: fix control-message timeout

commit 634371911730a462626071065b64cd6e1fe213e0 upstream.

The control-message timeout is specified in milliseconds and should not
depend on HZ.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoUSB: keyspan: fix bogus array index
Johan Hovold [Tue, 4 Jun 2013 16:50:29 +0000]
USB: keyspan: fix bogus array index

commit a07088098a650267b2eda689538133a324b9523f upstream.

The outcont_endpoints array was indexed using the port minor number
(which can be greater than the array size) rather than the device port
number.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoUSB: iuu_phoenix: fix bulk-message timeout
Johan Hovold [Mon, 27 May 2013 12:44:42 +0000]
USB: iuu_phoenix: fix bulk-message timeout

commit 6c13ff68a7ce01da7a51b44241a7aad8eaaedde7 upstream.

The bulk-message timeout is specified in milliseconds and should not
depend on HZ.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoALSA: usb-audio - Fix invalid volume resolution on Logitech HD webcam c270
Takashi Iwai [Wed, 5 Jun 2013 06:35:26 +0000]
ALSA: usb-audio - Fix invalid volume resolution on Logitech HD webcam c270

commit 11e7064f35bb87da8f427d1aa4bbd8b7473a3993 upstream.

USB audio driver spews an error message when probing Logitech HD
webcam c270:
  ALSA mixer.c:1300 usb_audio: Warning! Unlikely big volume range (=6144), cval->res is probably wrong.
  ALSA mixer.c:1304 usb_audio: [5] FU [Mic Capture Volume] ch = 1, val = 1536/7680/1

Obviously the device needs a fixed volume resolution (cval->res = 384)
like other Logitech devices.

Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=821735

Reported-and-tested-by: Cristian Rodríguez <crrodriguez@opensuse.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoALSA: usb-audio - Apply Logitech QuickCam Pro 9000 quirk only to audio iface
Takashi Iwai [Tue, 4 Jun 2013 14:02:54 +0000]
ALSA: usb-audio - Apply Logitech QuickCam Pro 9000 quirk only to audio iface

commit 8eafc0a161123d90617c9ca2eddfe87b382b1b89 upstream.

... instead of applying to all interfaces.

Reference: http://forums.gentoo.org/viewtopic-p-6886404.html

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoALSA: usb-audio: fix Roland/Cakewalk UM-3G support
Clemens Ladisch [Sun, 2 Jun 2013 17:49:07 +0000]
ALSA: usb-audio: fix Roland/Cakewalk UM-3G support

commit a0c6d309c6df14655f9962f666d1da96318b0b7c upstream.

Commit 927c9423dd5f2d1c0b93d5e694ab84b4a5559713 (ALSA: usb-audio: add
Edirol UM-3G support) used a wrong quirk type, which would make the
driver refuse to attach with the error message "MIDIStreaming interface
descriptor not found".

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoxhci: fix list access before init
Vladimir Murzin [Tue, 9 Apr 2013 18:33:31 +0000]
xhci: fix list access before init

commit 88696ae432ce7321540ac53d9caab3de9118b094 upstream.

If for whatever reason we fall into fail path in xhci_mem_init()
before bw table gets initialized we may access the uninitialized lists
in xhci_mem_cleanup().

Check for bw table before traversing lists in cleanup routine.

This patch should be backported to kernels as old as 3.2, that contain
the commit 839c817ce67178ca3c7c7ad534c571bba1e69ebe "xhci: Store
information about roothubs and TTs."

Reported-by: Sergey Dyasly <dserrg@gmail.com>
Tested-by: Sergey Dyasly <dserrg@gmail.com>
Signed-off-by: Vladimir Murzin <murzin.v@gmail.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoxhci-mem: init list heads at the beginning of init
Sergio Aguirre [Thu, 4 Apr 2013 17:32:13 +0000]
xhci-mem: init list heads at the beginning of init

commit 331de00a64e5027365145bdf51da27b9ce15dfd5 upstream.

It is possible that we fail on xhci_mem_init, just before doing
the INIT_LIST_HEAD, and calling xhci_mem_cleanup.

Problem is that, the list_for_each_entry_safe macro, assumes
list heads are initialized (not NULL), and dereferences their 'next'
pointer, causing a kernel panic if this is not yet initialized.

Let's protect from that by moving inits to the beginning.

This patch should be backported to kernels as old as 3.2, that
contain the commit 9574323c39d1f8359a04843075d89c9f32d8b7e6 "xHCI: test
USB2 software LPM".

Signed-off-by: Sergio Aguirre <sergio.a.aguirre.rodriguez@intel.com>
Acked-by: David Cohen <david.a.cohen@intel.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoxhci - correct comp_mode_recovery_timer on return from hibernate
Tony Camuso [Thu, 21 Feb 2013 21:11:27 +0000]
xhci - correct comp_mode_recovery_timer on return from hibernate

commit 77df9e0b799b03e1d5d9c68062709af5f637e834 upstream.

Commit 71c731a2 (usb: host: xhci: Fix Compliance Mode on SN65LVPE502CP
Hardware) was a workaround for systems using the SN65LVPE502CP,
controller, but it introduced a bug in resume from hibernate.

The fix created a timer, comp_mode_recovery_timer, which is deleted from
a timer list when xhci_suspend() is called. However, the hibernate image,
including the timer list containing the comp_mode_recovery_timer, had
already been saved before the timer was deleted.

Upon resume from hibernate, the list containing the comp_mode_recovery_timer
is restored from the image saved to disk, and xhci_resume(), assuming that
the timer had been deleted by xhci_suspend(), makes a call to
compliance_mode_recoery_timer_init(), which creates a new instance of the
comp_mode_recovery_timer and attempts to place it into the same list in which
it is already active, thus corrupting the list during the list_add() call.

At this point, a call trace is emitted indicating the list corruption.
Soon afterward, the system locks up, the watchdog times out, and the
ensuing NMI crashes the system.

The problem did not occur when resuming from suspend. In suspend, the
image in RAM remains exactly as it was when xhci_suspend() deleted the
comp_mode_recovery_timer, so there is no problem when xhci_resume()
creates a new instance of this timer and places it in the still empty
list.

This patch avoids the problem by deleting the timer in xhci_resume()
when resuming from hibernate. Now xhci_resume() can safely make the
call to create a new instance of this timer, whether returning from
suspend or hibernate.

Thanks to Alan Stern for his help with understanding the problem.

[Sarah reworked this patch to cover the case where the xHCI restore
register operation fails, and (temp & STS_SRE) is true (and we re-init
the host, including re-init for the compliance mode), but hibernate is
false.  The original patch would have caused list corruption in this
case.]

This patch should be backported to kernels as old as 3.2, that
contain the commit 71c731a296f1b08a3724bd1b514b64f1bda87a23 "usb: host:
xhci: Fix Compliance Mode on SN65LVPE502CP Hardware"

Signed-off-by: Tony Camuso <tcamuso@redhat.com>
Tested-by: Tony Camuso <tcamuso@redhat.com>
Acked-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoUSB: option: blacklist network interface on Huawei E1820
Bjørn Mork [Thu, 6 Jun 2013 10:57:24 +0000]
USB: option: blacklist network interface on Huawei E1820

commit b8a24e6281d37243c06b9497dcbfaa98c1e2ad35 upstream.

The mode used by Windows for the Huawei E1820 will use the
same ff/ff/ff class codes for both serial and network
functions.

Reported-by: Graham Inggs <graham.inggs@uct.ac.za>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoLinux 3.4.48
Greg Kroah-Hartman [Fri, 7 Jun 2013 19:50:29 +0000]
Linux 3.4.48

6 years agothinkpad-acpi: recognize latest V-Series using DMI_BIOS_VENDOR
Manoj Iyer [Mon, 6 Aug 2012 23:15:37 +0000]
thinkpad-acpi: recognize latest V-Series using DMI_BIOS_VENDOR

commit a4f46bb9fa84642e356898ee44b670989622f8bb upstream.

In the latest V-series bios DMI_PRODUCT_VERSION does not contain
the string Lenovo or Thinkpad, but is set to the model number, this
causes the thinkpad_acpi module to fail to load. Recognize laptop
as Lenovo using DMI_BIOS_VENDOR instead, which is set to Lenovo.

Test on V490u
=============
== After the patch ==

[ 1350.295757] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[ 1350.295760] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 1350.295761] thinkpad_acpi: ThinkPad BIOS H7ET21WW (1.00 ), EC unknown
[ 1350.295763] thinkpad_acpi: Lenovo LENOVO, model LV5DXXX
[ 1350.296086] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[ 1350.296694] thinkpad_acpi: radio switch found; radios are enabled
[ 1350.296703] thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode
[ 1350.306466] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[ 1350.307082] Registered led device: tpacpi::thinklight
[ 1350.307215] Registered led device: tpacpi::power
[ 1350.307255] Registered led device: tpacpi::standby
[ 1350.307294] Registered led device: tpacpi::thinkvantage
[ 1350.308160] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 1350.308333] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 1350.312287] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input14

== Before the patch ==
sudo modprobe thinkpad_acpi
FATAL: Error inserting thinkpad_acpi (/lib/modules/3.2.0-27-generic/kernel/drivers/platform/x86/thinkpad_acpi.ko): No such device

Test on B485
=============
This patch was also test in a B485 where the thinkpad_acpi module does not
have any issues loading. But, I tested it to make sure this patch does not
break on already functioning models of Lenovo products.

[13486.746359] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[13486.746364] thinkpad_acpi: http://ibm-acpi.sf.net/
[13486.746368] thinkpad_acpi: ThinkPad BIOS HJET15WW(1.01), EC unknown
[13486.746373] thinkpad_acpi: Lenovo Lenovo LB485, model 814TR01
[13486.747300] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[13486.752435] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[13486.752883] Registered led device: tpacpi::thinklight
[13486.752915] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[13486.753216] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[13486.757147] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input15

Signed-off-by: Manoj Iyer <manoj.iyer@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Cc: Shuduo Sang <shuduo.sang@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agomac80211: close AP_VLAN interfaces before unregistering all
Johannes Berg [Thu, 23 May 2013 23:06:09 +0000]
mac80211: close AP_VLAN interfaces before unregistering all

commit c8aa22db0112f640ac6631347f850879c621840b upstream.

Since Eric's commit efe117ab8 ("Speedup ieee80211_remove_interfaces")
there's a bug in mac80211 when it unregisters with AP_VLAN interfaces
up. If the AP_VLAN interface was registered after the AP it belongs
to (which is the typical case) and then we get into this code path,
unregister_netdevice_many() will crash because it isn't prepared to
deal with interfaces being closed in the middle of it. Exactly this
happens though, because we iterate the list, find the AP master this
AP_VLAN belongs to and dev_close() the dependent VLANs. After this,
unregister_netdevice_many() won't pick up the fact that the AP_VLAN
is already down and will do it again, causing a crash.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>