9 years agolis3: fix show rate for 8 bits chips
Éric Piel [Tue, 15 Dec 2009 02:01:40 +0000]
lis3: fix show rate for 8 bits chips

Originally the driver was only targeted to 12bits sensors.  When support
for 8bits sensors was added, some slight difference in the registers were
overlooked.  This should fix it, both for initialization, and for
displaying the rate.

Reported-by: Kalhan Trisal <kalhan.trisal@intel.com>
Reported-by: Christoph Plattner <christoph.plattner@gmx.at>
Tested-by: Christoph Plattner <christoph.plattner@gmx.at>
Tested-by: Samu Onkalo <samu.p.onkalo@nokia.com>
Signed-off-by: Éric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agolis3: update documentation and comments
Éric Piel [Tue, 15 Dec 2009 02:01:39 +0000]
lis3: update documentation and comments

Most of the documentation and comments were written when the driver was
only supporting one type of chip, only via ACPI/HP. Update the info to
the much clearer understanding that we have now.

Signed-off-by: Éric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agolis3lv02d: correct memory leak in module unload
Samu Onkalo [Tue, 15 Dec 2009 02:01:39 +0000]
lis3lv02d: correct memory leak in module unload

polled input device itself was not free'd.

Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com>
Tested-by: Éric Piel <eric.piel@tremplin-utc.net>
Acked-by: Éric Piel <eric.piel@tremplin-utc.net>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agolis3lv02d: send sync event
Samu Onkalo [Tue, 15 Dec 2009 02:01:38 +0000]
lis3lv02d: send sync event

Send input_sync after each measurement round. This helps userspace to
detect which reported values belongs to the same measurement.

Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com>
Tested-by: Éric Piel <eric.piel@tremplin-utc.net>
Acked-by: Éric Piel <eric.piel@tremplin-utc.net>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agohwmon: w83627ehf updates
Daniel J Blueman [Tue, 15 Dec 2009 02:01:37 +0000]
hwmon: w83627ehf updates

Add control of fan minimum turn-on output levels, decoupling it from the
fan turn-off output level.  Add control of rate of change of fan output
level.  These in turn allow lower turn-off rotor speed and smoother
transitions for better thermal and acoustic control authority.  Add
support for constant fan speed and proportional-response operations modes.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: David Hubbard <david.c.hubbard@gmail.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agolis3lv02d: axis remap and resource setup/release
Samu Onkalo [Tue, 15 Dec 2009 02:01:35 +0000]
lis3lv02d: axis remap and resource setup/release

Add the possibility to remap axes via platform data.  Function pointers
for resource setup and release purposes

Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com>
Acked-by: Éric Piel <eric.piel@tremplin-utc.net>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: "Trisal, Kalhan" <kalhan.trisal@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agocrc32: minor optimizations and cleanup
Joakim Tjernlund [Tue, 15 Dec 2009 02:01:33 +0000]
crc32: minor optimizations and cleanup

Move common crc body to new function crc32_body() cleaup and micro
optimize crc32_body for speed and less size.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agommc: let tmio-mmc use dev_name() with request_irq()
Magnus Damm [Tue, 15 Dec 2009 02:01:33 +0000]
mmc: let tmio-mmc use dev_name() with request_irq()

Improve the /proc/interrupts output so the irq number can be mapped to
platform device on boards with multiple tmio_mmc instances.

Signed-off-by: Magnus Damm <damm@opensource.se>
Cc: <linux-mmc@vger.kernel.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agommc: Blackfin SD Host Controller Driver
Cliff Cai [Tue, 15 Dec 2009 02:01:32 +0000]
mmc: Blackfin SD Host Controller Driver

Add SD host driver for Blackfin BF54x and BF51x.

[akpm@linux-foundation.org: fix layout, c99 warning]
Signed-off-by: Cliff Cai <cliffcai.sh@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agommc: atmel-mci: new MCI2 module support in atmel-mci driver
Nicolas Ferre [Tue, 15 Dec 2009 02:01:31 +0000]
mmc: atmel-mci: new MCI2 module support in atmel-mci driver

This new revision of the IP adds some improvements to the MCI already
present in several Atmel SOC.

Some new registers are added and a particular way of handling DMA
interaction lead to a new sequence in function call which is backward
compatible: On MCI2, we must set the DMAEN bit to enable the DMA
handshaking interface.  This must happen before the data transfer command
is sent.

A new function is able to differentiate MCI2 code and is based on
knowledge of processor id (cpu_is_xxx()).

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoatmel-mci: change use of dma slave interface
Nicolas Ferre [Tue, 15 Dec 2009 02:01:30 +0000]
atmel-mci: change use of dma slave interface

Allow the use of another DMA controller driver in atmel-mci sd/mmc driver.
 This adds a generic dma_slave pointer to the mci platform structure where
we can store DMA controller information.  In atmel-mci we use information
provided by this structure to initialize the driver (with new helper
functions that are architecture dependant).

This also adds at32/avr32 chip modifications to cope with this new access
method.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agommc: add module parameter to set whether cards are assumed removable
Ben Hutchings [Tue, 15 Dec 2009 02:01:29 +0000]
mmc: add module parameter to set whether cards are assumed removable

Some people run general-purpose distribution kernels on netbooks with
a card that is physically non-removable or logically non-removable
(e.g. used for /home) and cannot be cleanly unmounted during suspend.
Add a module parameter to set whether cards are assumed removable or
non-removable, with the default set by CONFIG_MMC_UNSAFE_RESUME.

In general, it is not possible to tell whether a card present in an MMC
slot after resume is the same that was there before suspend.  So there are
two possible behaviours, each of which will cause data loss in some cases:

CONFIG_MMC_UNSAFE_RESUME=n (default): Cards are assumed to be removed
during suspend.  Any filesystem on them must be unmounted before suspend;
otherwise, buffered writes will be lost.

CONFIG_MMC_UNSAFE_RESUME=y: Cards are assumed to remain present during
suspend.  They must not be swapped during suspend; otherwise, buffered
writes will be flushed to the wrong card.

Currently the choice is made at compile time and this allows that to be
overridden at module load time.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Wouter van Heyst <larstiq@larstiq.dyndns.org>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agos3cmci: convert missed s3c2410_gpio calls to gpiolib calls
Ben Dooks [Tue, 15 Dec 2009 02:01:27 +0000]
s3cmci: convert missed s3c2410_gpio calls to gpiolib calls

Convert two missed s3c2410 specific gpio calls to gpiolib calls.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Simtec Linux Team <linux@simtec.co.uk>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agosdhci: add support for the SysKonnect CardBus2SDIO adapter
Nicolas Pitre [Tue, 15 Dec 2009 02:01:26 +0000]
sdhci: add support for the SysKonnect CardBus2SDIO adapter

This is still in use especially to develop SDIO device drivers on laptop
machines which are lacking SDIO slots.  This adapter supports SDIO cards
only due to lack of 136-bit response capability.

Signed-off-by: Nicolas Pitre <nico@marvell.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agommci-omap: remove bogus check for host->iclk
Ladislav Michl [Tue, 15 Dec 2009 02:01:24 +0000]
mmci-omap: remove bogus check for host->iclk

Remove check for host->iclk being NULL from error path since we already
know it is non-null and use return value from clk_get.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agodavinci: mmc: add cpufreq support
Chaithrika U S [Tue, 15 Dec 2009 02:01:23 +0000]
davinci: mmc: add cpufreq support

Add cpufreq support to MMC driver. The clock divider value has to be
modified according to the controller input frequency.

Signed-off-by: Chaithrika U S <chaithrika@ti.com>
Cc: Linus Walleij <linus.ml.walleij@gmail.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agommc: davinci: modify data types of EDMA related variables
Sudhakar Rajashekhara [Tue, 15 Dec 2009 02:01:22 +0000]
mmc: davinci: modify data types of EDMA related variables

Currently DaVinci EDMA driver supports multiple EDMA channel controller
instances.  edma_alloc_channel() api returns a 32 bit value which has the
channel controller number in MSB and the EDMA channel number in LSB.  The
variables which store the value returned by edma_alloc_channel() have to
be 32 bit wide now.

Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Acked-by: Vipin Bhandari <vipin.bhandari@ti.com>
Cc: Purshotam Kumar <purushotam@ti.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoDaVinci: MMC: MMC/SD controller driver for DaVinci family
Vipin Bhandari [Tue, 15 Dec 2009 02:01:21 +0000]
DaVinci: MMC: MMC/SD controller driver for DaVinci family

Add support for MMC/SD controller driver for all DaVinci family SoC.  This
patch supports davinci family SoC's DM6446, DM355, DM365 and
DA830/OMAPL137.

The patch has been tested on DM355 EVM.

The MMCSD controller specifications for DM355 can be found at
http://focus.ti.com/general/docs/litabsmultiplefilelist.tsp?literatureNumber=spruee2c

Signed-off-by: Vipin Bhandari <vipin.bhandari@ti.com>
Signed-off-by: Purshotam Kumar <purushotam@ti.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agodrivers/mmc: Move dereference after NULL test
Julia Lawall [Tue, 15 Dec 2009 02:01:20 +0000]
drivers/mmc: Move dereference after NULL test

If the NULL test on mrq is needed, then the derefernce should be after the
NULL test.

A simplified version of the semantic match that detects this problem is as
follows (http://coccinelle.lip6.fr/):

// <smpl>
@match exists@
expression x, E;
identifier fld;
@@

* x->fld
  ... when != \(x = E\|&x\)
* x == NULL
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agosdio: rework cis tuple parsing
Albert Herranz [Tue, 15 Dec 2009 02:01:19 +0000]
sdio: rework cis tuple parsing

Rework the current CIS tuple parsing code, reusing the existing
infrastructure and providing an easy way to add new CISTPL_FUNCE parsers
by TPLFE_TYPE.

Valid known CIS tuples are now silently queued for the SDIO function
driver when not parsed/processed (-EILSEQ) by the SDIO core.  Unknown CIS
tuples (-ENOENT) are queued too for the SDIO function driver without
aborting the initialization, but emit a warning in the kernel log.

CISTPL_FUNCE tuples can be "whitelisted" now by adding a matching entry to
the cis_tpl_funce_list table.

Signed-off-by: Albert Herranz <albert_herranz@yahoo.es>
Acked-by: Pierre Ossman <pierre@ossman.eu>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agomxcmmc: fix error path in mxcmci_probe
Uwe Kleine-König [Tue, 15 Dec 2009 02:01:17 +0000]
mxcmmc: fix error path in mxcmci_probe

After a failing allocation of mmc or a failed ioremap in mxcmci_probe host was
used uninitialized.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pierre Ossman <pierre@ossman.eu>
Cc: Martin Fuzzey <mfuzzey@gmail.com>
Cc: Pierre Ossman <drzeus@drzeus.cx>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agofirmware: only allow EDD on x86
Mike Frysinger [Tue, 15 Dec 2009 02:01:16 +0000]
firmware: only allow EDD on x86

Rather than have the EDD depend on !ia64 (and assuming that only ia64,
x86, x86_64 will be including this Kconfig), have EDD depend on the only
arches which can support this code.  This should allow all other arches to
cleanly include the firmware Kconfig.

Also simplify the x86 string used by FIRMWARE_MEMMAP to match EDD.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Matt Domsch <Matt_Domsch@dell.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoSubject: Re: [PATCH] strstrip incorrectly marked __must_check
KOSAKI Motohiro [Tue, 15 Dec 2009 02:01:15 +0000]
Subject: Re: [PATCH] strstrip incorrectly marked __must_check

Recently, We marked strstrip() as must_check.  because it was frequently
misused and it should be checked.  However, we found one exception.
scsi/ipr.c intentionally ignore return value of strstrip.  Because it
wishes to keep the whitespace at the beginning.

Thus we need to keep with and without checked whitespace trim function.
This patch adds a new strim() and changes ipr.c to use it.

[akpm@linux-foundation.org: coding-style fixes]
Suggested-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoefi.h: use %pUl to print UUIDs
Joe Perches [Tue, 15 Dec 2009 02:01:14 +0000]
efi.h: use %pUl to print UUIDs

Shrinks vmlinux

without:
$ size vmlinux
   text    data     bss     dec     hex filename
6975863  679652 1359668 9015183  898f8f vmlinux

with:
$ size vmlinux
   text    data     bss     dec     hex filename
6975639 679652 1359668 9014959 898eaf vmlinux

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Jeff Garzik <jgarzik@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agofs/ubifs: use %pUB to print UUIDs
Joe Perches [Tue, 15 Dec 2009 02:01:13 +0000]
fs/ubifs: use %pUB to print UUIDs

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Artem Bityutskiy <dedekind@infradead.org>
Cc: Adrian Hunter <adrian.hunter@nokia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agofs/gfs2/sys.c: use %pUB to print UUIDs
Joe Perches [Tue, 15 Dec 2009 02:01:13 +0000]
fs/gfs2/sys.c: use %pUB to print UUIDs

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agodrivers/md/md.c: use %pU to print UUIDs
Joe Perches [Tue, 15 Dec 2009 02:01:12 +0000]
drivers/md/md.c: use %pU to print UUIDs

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agodrivers/firmware/dmi_scan.c: use %pUB to print UUIDs
Joe Perches [Tue, 15 Dec 2009 02:01:11 +0000]
drivers/firmware/dmi_scan.c: use %pUB to print UUIDs

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Jeff Garzik <jgarzik@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agorandom.c: use %pU to print UUIDs
Joe Perches [Tue, 15 Dec 2009 02:01:11 +0000]
random.c: use %pU to print UUIDs

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agofs/xfs/xfs_log_recover.c: use %pU to print UUIDs
Joe Perches [Tue, 15 Dec 2009 02:01:10 +0000]
fs/xfs/xfs_log_recover.c: use %pU to print UUIDs

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Alex Elder <aelder@sgi.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agolib/vsprintf.c: add %pU to print UUID/GUIDs
Joe Perches [Tue, 15 Dec 2009 02:01:09 +0000]
lib/vsprintf.c: add %pU to print UUID/GUIDs

UUID/GUIDs are somewhat common in kernel source.

Standardize the printed style of UUID/GUIDs by using
another extension to %p.

%pUb:   01020304-0506-0708-090a-0b0c0d0e0f10
%pUB:   01020304-0506-0708-090A-0B0C0D0E0F10 (upper case)
%pUl:   04030201-0605-0807-090a-0b0c0d0e0f10
%pUL:   04030201-0605-0807-090A-0B0C0D0E0F10 (upper case)

%pU defaults to %pUb

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Jeff Garzik <jgarzik@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Alex Elder <aelder@sgi.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Artem Bityutskiy <dedekind@infradead.org>
Cc: Adrian Hunter <adrian.hunter@nokia.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoparser: remove unnecessary strlen()
André Goddard Rosa [Tue, 15 Dec 2009 02:01:08 +0000]
parser: remove unnecessary strlen()

No functional change.  Cache strlen() result to avoid recalculating it up
to 3 times on the worst case.

Reduces code size a little by 32 bytes:
   text    data     bss     dec     hex filename
   1385       0       0    1385     569 lib/parser.o-BEFORE
   1353       0       0    1353     549 lib/parser.o-AFTER

Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agotree-wide: convert open calls to remove spaces to skip_spaces() lib function
André Goddard Rosa [Tue, 15 Dec 2009 02:01:06 +0000]
tree-wide: convert open calls to remove spaces to skip_spaces() lib function

Makes use of skip_spaces() defined in lib/string.c for removing leading
spaces from strings all over the tree.

It decreases lib.a code size by 47 bytes and reuses the function tree-wide:
   text    data     bss     dec     hex filename
  64688     584     592   65864   10148 (TOTALS-BEFORE)
  64641     584     592   65817   10119 (TOTALS-AFTER)

Also, while at it, if we see (*str && isspace(*str)), we can be sure to
remove the first condition (*str) as the second one (isspace(*str)) also
evaluates to 0 whenever *str == 0, making it redundant. In other words,
"a char equals zero is never a space".

Julia Lawall tried the semantic patch (http://coccinelle.lip6.fr) below,
and found occurrences of this pattern on 3 more files:
    drivers/leds/led-class.c
    drivers/leds/ledtrig-timer.c
    drivers/video/output.c

@@
expression str;
@@

( // ignore skip_spaces cases
while (*str &&  isspace(*str)) { \(str++;\|++str;\) }
|
- *str &&
isspace(*str)
)

Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com>
Cc: Julia Lawall <julia@diku.dk>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Neil Brown <neilb@suse.de>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: David Howells <dhowells@redhat.com>
Cc: <linux-ext4@vger.kernel.org>
Cc: Samuel Ortiz <samuel@sortiz.org>
Cc: Patrick McHardy <kaber@trash.net>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agostring: on strstrip(), first remove leading spaces before running over str
André Goddard Rosa [Tue, 15 Dec 2009 02:01:04 +0000]
string: on strstrip(), first remove leading spaces before running over str

... so that strlen() iterates over a smaller string comprising of the
remaining characters only.

Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agostring: factorize skip_spaces and export it to be generally available
André Goddard Rosa [Tue, 15 Dec 2009 02:01:04 +0000]
string: factorize skip_spaces and export it to be generally available

On the following sentence:
    while (*s && isspace(*s))
        s++;

If *s == 0, isspace() evaluates to ((_ctype[*s] & 0x20) != 0), which
evaluates to ((0x08 & 0x20) != 0) which equals to 0 as well.
If *s == 1, we depend on isspace() result anyway. In other words,
"a char equals zero is never a space", so remove this check.

Also, *s != 0 is most common case (non-null string).

Fixed const return as noticed by Jan Engelhardt and James Bottomley.
Fixed unnecessary extra cast on strstrip() as noticed by Jan Engelhardt.

Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agodrivers/scsi/sym53c8xx_2/sym_glue.c: rename skip_spaces() to sym_skip_spaces()
Andrew Morton [Tue, 15 Dec 2009 02:01:02 +0000]
drivers/scsi/sym53c8xx_2/sym_glue.c: rename skip_spaces() to sym_skip_spaces()

To avoid a collision with the newly-added kernel-wide skip_spaces().

Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoctype: constify read-only _ctype string
André Goddard Rosa [Tue, 15 Dec 2009 02:01:02 +0000]
ctype: constify read-only _ctype string

While at it, use tabs to indent the comments.

Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agovsprintf: reuse almost identical simple_strtoulX() functions
André Goddard Rosa [Tue, 15 Dec 2009 02:01:01 +0000]
vsprintf: reuse almost identical simple_strtoulX() functions

The difference between simple_strtoul() and simple_strtoull() is just
the size of the variable used to keep track of the sum of characters
converted to numbers:

unsigned long simple_strtoul() {...}
unsigned long long simple_strtoull(){...}

Both are same size on my Core 2/gcc 4.4.1.
Overflow condition is not checked on both functions, so an extremely large
string can break these functions so that they don't even notice it.

As we do not care for overflowing on these functions, always keep the sum
using the larger variable around (unsigned long long) on simple_strtoull()
and cast it to (unsigned long) on simple_strtoul(), which then becomes
just a wrapper around simple_strtoull().

Code size decreases by 304 bytes:
   text    data     bss     dec     hex filename
  15534       0       8   15542    3cb6 vsprintf.o (ex lib/lib.a-BEFORE)
  15230       0       8   15238    3b86 vsprintf.o (ex lib/lib.a-AFTER)

Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agovsprintf: factor out skip_space code in a separate function
André Goddard Rosa [Tue, 15 Dec 2009 02:01:00 +0000]
vsprintf: factor out skip_space code in a separate function

When converting more caller sites, the inline decision will be left up to gcc.

It decreases code size:
 text    data     bss     dec     hex filename
15710       0       8   15718    3d66 vsprintf.o (ex lib/lib.a-BEFORE)
15534       0       8   15542    3cb6 vsprintf.o (ex lib/lib.a-AFTER)

Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agovsprintf: move local vars to block local vars and remove unneeded ones
André Goddard Rosa [Tue, 15 Dec 2009 02:00:59 +0000]
vsprintf: move local vars to block local vars and remove unneeded ones

Cleanup by moving variables closer to the scope where they're used in fact.
Also, remove unneeded ones.

Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agovsprintf: reduce code size by avoiding extra check
André Goddard Rosa [Tue, 15 Dec 2009 02:00:59 +0000]
vsprintf: reduce code size by avoiding extra check

No functional change, just refactor the code so that it avoid checking
"if (hi)" two times in a sequence, taking advantage of previous check made.

It also reduces code size:
   text    data     bss     dec     hex filename
  15726       0       8   15734    3d76 vsprintf.o (ex lib/lib.a-BEFORE)
  15710       0       8   15718    3d66 vsprintf.o (ex lib/lib.a-AFTER)

Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agovsprintf: use TOLOWER whenever possible
André Goddard Rosa [Tue, 15 Dec 2009 02:00:58 +0000]
vsprintf: use TOLOWER whenever possible

It decreases code size as well:
 text    data     bss     dec     hex filename
15758       0       8   15766    3d96 vsprintf.o (ex lib/lib.a-BEFORE)
15726       0       8   15734    3d76 vsprintf.o (ex lib/lib.a-TOLOWER)

Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agovsprintf: give it some care to please checkpatch.pl
André Goddard Rosa [Tue, 15 Dec 2009 02:00:57 +0000]
vsprintf: give it some care to please checkpatch.pl

Most relevant complaints were addressed.

Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agovsprintf: pre-calculate final string length for later use
André Goddard Rosa [Tue, 15 Dec 2009 02:00:56 +0000]
vsprintf: pre-calculate final string length for later use

Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agovsprintf: factorize "(null)" string
André Goddard Rosa [Tue, 15 Dec 2009 02:00:55 +0000]
vsprintf: factorize "(null)" string

This patchset reduces lib/lib.a code size by 482 bytes on my Core 2 with
gcc 4.4.1 even considering that it exports a newly defined function
skip_spaces() to drivers:

   text    data     bss     dec     hex filename
  64867     840     592   66299   102fb (TOTALS-lib.a-BEFORE)
  64641     584     592   65817   10119 (TOTALS-lib.a-AFTER)
and implements some code tidy up.

Besides reducing lib.a size, it converts many in-tree drivers to use the
newly defined function, which makes another small reduction on kernel size
overall when those drivers are used.

This patch:

Change "<NULL>" to "(null)", unifying 3 equal strings.
glibc also uses "(null)" for the same purpose.

It decreases code size by 7 bytes:
 text    data     bss     dec     hex filename
15765       0       8   15773    3d9d vsprintf.o (ex lib/lib.a-BEFORE)
15758       0       8   15766    3d96 vsprintf.o (ex lib/lib.a-AFTER)

Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoMAINTAINERS: Update file patterns for WOLFSON MICROELECTRONICS PMIC DRIVERS
Joe Perches [Tue, 15 Dec 2009 02:00:54 +0000]
MAINTAINERS: Update file patterns for WOLFSON MICROELECTRONICS PMIC DRIVERS

One of the includes pointed to a non-existent directory
Add Documentation/hwmon/wm83??
Add sound/soc/codecs/wm(8350|8400).h files

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoMAINTAINERS: remove file pattern from KERNEL VIRTUAL MACHINE (KVM) FOR AMD-V
Joe Perches [Tue, 15 Dec 2009 02:00:53 +0000]
MAINTAINERS: remove file pattern from KERNEL VIRTUAL MACHINE (KVM) FOR AMD-V

Commit 6c8166a77c98f473eb91e96a61c3cf78ac617278 ("KVM: SVM: Fold kvm_svm.h
info svm.c") folded this file away.

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoMAINTAINERS: rename PALM TREO section and file patterns
Joe Perches [Tue, 15 Dec 2009 02:00:52 +0000]
MAINTAINERS: rename PALM TREO section and file patterns

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Tomas Cech <sleep_walker@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoMAINTAINERS: mark cifs mailing list as "moderated for non-subscribers"
KOSAKI Motohiro [Tue, 15 Dec 2009 02:00:52 +0000]
MAINTAINERS: mark cifs mailing list as "moderated for non-subscribers"

If non-subscribers post bug report to CIFS mailing list, they will get
following messages.

Your mail to 'linux-cifs-client' with the subject

    [PATCH x/x] cifs: xxxxxxxxxxxxx

Is being held until the list moderator can review it for approval.

The reason it is being held:

    Post by non-member to a members-only list

Either the message will get posted to the list, or you will receive
notification of the moderator's decision.  If you would like to cancel
this posting, please visit the following URL:

members-only list should be written as so in MAINTAINERS file.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Steve French <sfrench@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoscripts/get_maintainer.pl: support multiple VCSs - add mercurial
Joe Perches [Tue, 15 Dec 2009 02:00:50 +0000]
scripts/get_maintainer.pl: support multiple VCSs - add mercurial

Restructure a bit for multiple version control systems support.

Use a hash for each supported VCS that contains the commands
and patterns used to find commits, logs, and signers.

--git command line options are still used for hg except for
--git-since.  Use --hg-since instead.

The number of commits can differ for git and hg, so --rolestats
might be different.

Style changes: Use common push style push(@foo...), simplify a return

Bumped version to 0.23.

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Marti Raudsepp <marti@juffo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoscripts/get_maintainer.pl: fix --non with --git-blame and cleanups
Joe Perches [Tue, 15 Dec 2009 02:00:49 +0000]
scripts/get_maintainer.pl: fix --non with --git-blame and cleanups

Fix email matching without name --n and --git-blame
   Using --non and --git-blame caused maintainer signature
   matching to fail.  Fixed that by adding 3rd argument to
   sub format_email to control show/hide name portion of address
Slurp -f file instead of reading line-by-line for K: pattern matching.
   Suggested by Wolfram Sang as more efficient
Refactor git command execution
   Break into 2 functions, execute/analyze
   Share code between --git and --git-blame
   Don't warn multiple times when git isn't installed
Improve stats reporting
   --git-min-percent and -- rolestats now count the total number of commits
   for either the period of --git-since or if using --git-blame the commits
   used by the current file and calculate commit % as
      # of commits signed / total commits * 100
Code style cleaning
   Use consistent sub foo { my (args...) = @_;

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Greg KH <greg@kroah.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoscripts/get_maintainer.pl: add --roles and --rolestats
Joe Perches [Tue, 15 Dec 2009 02:00:46 +0000]
scripts/get_maintainer.pl: add --roles and --rolestats

--roles shows the role of each email address, i.e. why it was selected.
--rolestats selects --roles and adds git log/blame signers #'s and %

Multiple roles are possible (supporter, maintainer, git-signer...)

--roles or --rolestats is meant to help identify appropriate maintainers
to notify and should not be used with "git send-email --cc-cmd"

Example output:

Existing:

$ ./scripts/get_maintainer.pl -f arch/x86/kernel/acpi/boot.c
Corentin Chary <corentincj@iksaif.net>
Karol Kozimor <sziwan@users.sourceforge.net>
Len Brown <len.brown@intel.com>
Pavel Machek <pavel@ucw.cz>
Rafael J. Wysocki <rjw@sisk.pl>
Thomas Gleixner <tglx@linutronix.de>
Ingo Molnar <mingo@redhat.com>
H. Peter Anvin <hpa@zytor.com>
x86@kernel.org
Yinghai Lu <yhlu.kernel@gmail.com>
Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
acpi4asus-user@lists.sourceforge.net
linux-pm@lists.linux-foundation.org
linux-kernel@vger.kernel.org

With --roles

$ ./scripts/get_maintainer.pl --roles -f arch/x86/kernel/acpi/boot.c
Corentin Chary <corentincj@iksaif.net> (maintainer:ASUS ACPI EXTRAS...)
Karol Kozimor <sziwan@users.sourceforge.net> (maintainer:ASUS ACPI EXTRAS...)
Len Brown <len.brown@intel.com> (supporter:SUSPEND TO RAM,git-signer)
Pavel Machek <pavel@ucw.cz> (supporter:SUSPEND TO RAM)
Rafael J. Wysocki <rjw@sisk.pl> (supporter:SUSPEND TO RAM)
Thomas Gleixner <tglx@linutronix.de> (maintainer:X86 ARCHITECTURE...)
Ingo Molnar <mingo@redhat.com> (maintainer:X86 ARCHITECTURE...,git-signer)
H. Peter Anvin <hpa@zytor.com> (maintainer:X86 ARCHITECTURE...)
x86@kernel.org (maintainer:X86 ARCHITECTURE...)
Yinghai Lu <yhlu.kernel@gmail.com> (git-signer)
Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> (git-signer)
acpi4asus-user@lists.sourceforge.net (open list:ASUS ACPI EXTRAS...)
linux-pm@lists.linux-foundation.org (open list:SUSPEND TO RAM)
linux-kernel@vger.kernel.org (open list)

With --rolestats

$ ./scripts/get_maintainer.pl --rolestats -f arch/x86/kernel/acpi/boot.c
Corentin Chary <corentincj@iksaif.net> (maintainer:ASUS ACPI EXTRAS...)
Karol Kozimor <sziwan@users.sourceforge.net> (maintainer:ASUS ACPI EXTRAS...)
Len Brown <len.brown@intel.com> (supporter:SUSPEND TO RAM,git-signer:16/79=20%)
Pavel Machek <pavel@ucw.cz> (supporter:SUSPEND TO RAM)
Rafael J. Wysocki <rjw@sisk.pl> (supporter:SUSPEND TO RAM)
Thomas Gleixner <tglx@linutronix.de> (maintainer:X86 ARCHITECTURE...)
Ingo Molnar <mingo@redhat.com> (maintainer:X86 ARCHITECTURE...,git-signer:29/79=37%)
H. Peter Anvin <hpa@zytor.com> (maintainer:X86 ARCHITECTURE...)
x86@kernel.org (maintainer:X86 ARCHITECTURE...)
Yinghai Lu <yhlu.kernel@gmail.com> (git-signer:12/79=15%)
Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> (git-signer:6/79=8%)
acpi4asus-user@lists.sourceforge.net (open list:ASUS ACPI EXTRAS...)
linux-pm@lists.linux-foundation.org (open list:SUSPEND TO RAM)
linux-kernel@vger.kernel.org (open list)

With --rolestats and --git-blame

$ ./scripts/get_maintainer.pl --rolestats --git-blame -f arch/x86/kernel/acpi/boot.c
Corentin Chary <corentincj@iksaif.net> (maintainer:ASUS ACPI EXTRAS...)
Karol Kozimor <sziwan@users.sourceforge.net> (maintainer:ASUS ACPI EXTRAS...)
Len Brown <len.brown@intel.com> (supporter:SUSPEND TO RAM,git-signer:16/79=20%,commits:22/154=14%)
Pavel Machek <pavel@ucw.cz> (supporter:SUSPEND TO RAM)
Rafael J. Wysocki <rjw@sisk.pl> (supporter:SUSPEND TO RAM)
Thomas Gleixner <tglx@linutronix.de> (maintainer:X86 ARCHITECTURE...)
Ingo Molnar <mingo@redhat.com> (maintainer:X86 ARCHITECTURE...,git-signer:29/79=37%,commits:36/154=23%)
H. Peter Anvin <hpa@zytor.com> (maintainer:X86 ARCHITECTURE...)
x86@kernel.org (maintainer:X86 ARCHITECTURE...)
Yinghai Lu <yhlu.kernel@gmail.com> (git-signer:12/79=15%,commits:9/154=6%)
Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> (git-signer:6/79=8%)
Andi Kleen <ak@suse.de> (commits:11/154=7%)
Andrew Morton <akpm@osdl.org> (commits:10/154=6%)
acpi4asus-user@lists.sourceforge.net (open list:ASUS ACPI EXTRAS...)
linux-pm@lists.linux-foundation.org (open list:SUSPEND TO RAM)
linux-kernel@vger.kernel.org (open list)

Other changes:

Format git-signers email addresses a bit to reduce bad signatures
Command line bad arguments emitted a verbose usage(), just show --help
Version number bumped to .22

Ben Hutchings had the idea and created a good deal of this implementation.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agovt: introduce and use vt_kmsg_redirect() function
Bernhard Walle [Tue, 15 Dec 2009 02:00:43 +0000]
vt: introduce and use vt_kmsg_redirect() function

The kernel offers with TIOCL_GETKMSGREDIRECT ioctl() the possibility to
redirect the kernel messages to a specific console.

However, since it's not possible to switch to the kernel message console
after a panic(), it would be nice if the kernel would print the panic
message on the current console.

This patch series adds a new interface to access the global kmsg_redirect
variable by a function to be able to use it in code where
CONFIG_VT_CONSOLE is not set (kernel/panic.c).

This patch:

Instead of using and exporting a global value kmsg_redirect, introduce a
function vt_kmsg_redirect() that both can set and return the console where
messages are printed.

Change all users of kmsg_redirect (the VT code itself and kernel/power.c)
to the new interface.

The main advantage is that vt_kmsg_redirect() can also be used when
CONFIG_VT_CONSOLE is not set.

Signed-off-by: Bernhard Walle <bernhard@bwalle.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agocs5535: drop the Geode-specific MFGPT/GPIO code
Andres Salomon [Tue, 15 Dec 2009 02:00:41 +0000]
cs5535: drop the Geode-specific MFGPT/GPIO code

With generic modular drivers handling all of this stuff, the
geode-specific code can go away.  The cs5535-gpio, cs5535-mfgpt, and
cs5535-clockevt drivers now handle this.

Signed-off-by: Andres Salomon <dilinger@collabora.co.uk>
Cc: Jordan Crouse <jordan@cosmicpenguin.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Chris Ball <cjb@laptop.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agocs5535: define lxfb/gxfb MSRs in linux/cs5535.h
Andres Salomon [Tue, 15 Dec 2009 02:00:40 +0000]
cs5535: define lxfb/gxfb MSRs in linux/cs5535.h

..and include them in the lxfb/gxfb drivers rather than asm/geode.h (where
possible).

Signed-off-by: Andres Salomon <dilinger@collabora.co.uk>
Cc: Jordan Crouse <jordan@cosmicpenguin.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Chris Ball <cjb@laptop.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agocs5535: move VSA2 checks into linux/cs5535.h
Andres Salomon [Tue, 15 Dec 2009 02:00:40 +0000]
cs5535: move VSA2 checks into linux/cs5535.h

Signed-off-by: Andres Salomon <dilinger@collabora.co.uk>
Cc: Jordan Crouse <jordan@cosmicpenguin.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Chris Ball <cjb@laptop.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agocs5535: move the DIVIL MSR definition into linux/cs5535.h
Andres Salomon [Tue, 15 Dec 2009 02:00:39 +0000]
cs5535: move the DIVIL MSR definition into linux/cs5535.h

The only thing that uses this is the reboot_fixups code.

Signed-off-by: Andres Salomon <dilinger@collabora.co.uk>
Cc: Jordan Crouse <jordan@cosmicpenguin.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Chris Ball <cjb@laptop.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agocs5535: add a generic clock event MFGPT driver
Andres Salomon [Tue, 15 Dec 2009 02:00:38 +0000]
cs5535: add a generic clock event MFGPT driver

This is based on the old code in arch/x86/kernel/mfgpt_32.c, but is
modular and not Geode-specific.  There's no reason why the clock event
device needs to be registered so early at boot; the clockevent code is
perfectly capable of dynamic switching.

[akpm@linux-foundation.org: add linux/irq.h include]
Signed-off-by: Andres Salomon <dilinger@collabora.co.uk>
Cc: Jordan Crouse <jordan@cosmicpenguin.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Chris Ball <cjb@laptop.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agocs5535: add a generic MFGPT driver
Andres Salomon [Tue, 15 Dec 2009 02:00:37 +0000]
cs5535: add a generic MFGPT driver

This is based on the old code on arch/x86/kernel/mfgpt_32.c, except it's
not x86 specific, it's modular, and it makes use of a PCI BAR rather than
a random MSR.  Currently module unloading is not supported; it's uncertain
whether or not it can be made work with the hardware.

[akpm@linux-foundation.org: add X86 dependency]
Signed-off-by: Andres Salomon <dilinger@collabora.co.uk>
Cc: Jordan Crouse <jordan@cosmicpenguin.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Chris Ball <cjb@laptop.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoALSA: cs5535audio: free OLPC quirks from reliance on MGEODE_LX cpu optimization
Andres Salomon [Tue, 15 Dec 2009 02:00:36 +0000]
ALSA: cs5535audio: free OLPC quirks from reliance on MGEODE_LX cpu optimization

Previously, OLPC support for the mic extensions was only enabled in the
ALSA driver if CONFIG_OLPC and CONFIG_MGEODE_LX were both set.  This was
because the old geode GPIO code was written in a manner that assumed
CONFIG_MGEODE_LX.  With the new cs553x-gpio driver, this is no longer the
case; as such, we can drop the requirement on CONFIG_MGEODE_LX and instead
include a requirement on GPIOLIB.

We use the generic GPIO API rather than the cs553x-specific API.

Signed-off-by: Andres Salomon <dilinger@collabora.co.uk>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Jordan Crouse <jordan@cosmicpenguin.net>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agocs5535-gpio: request function, mask & names added
Tobias Mueller [Tue, 15 Dec 2009 02:00:35 +0000]
cs5535-gpio: request function, mask & names added

Changed number of gpio pins to 32 (according to datasheet)

Added mask to disable some pins

Added gpio_request for checking mask and disabling special pin functions

Added pin names

[dilinger@collabora.co.uk: make printk usage consistent]
Signed-off-by: Tobias Mueller <Tobias_Mueller@twam.info>
Signed-off-by: Andres Salomon <dilinger@collabora.co.uk>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Jordan Crouse <jordan@cosmicpenguin.net>
Cc: David Brownell <david-b@pacbell.net>
Cc: Alessandro Zummo <alessandro.zummo@towertech.it>
Signed-off-by: Andres Salomon <dilinger@collabora.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agocs5535-gpio: add AMD CS5535/CS5536 GPIO driver support
Andres Salomon [Tue, 15 Dec 2009 02:00:32 +0000]
cs5535-gpio: add AMD CS5535/CS5536 GPIO driver support

This creates a CS5535/CS5536 GPIO driver which uses a gpio_chip backend
(allowing GPIO users to use the generic GPIO API if desired) while also
allowing architecture-specific users directly (via the cs5535_gpio_*
functions).

Tested on an OLPC machine.  Some Leemotes also use CS5536 (with a mips
cpu), which is why this is in drivers/gpio rather than arch/x86.
Currently, it conflicts with older geode GPIO support; once MFGPT support
is reworked to also be more generic, the older geode code will be removed.

Signed-off-by: Andres Salomon <dilinger@collabora.co.uk>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Jordan Crouse <jordan@cosmicpenguin.net>
Cc: David Brownell <david-b@pacbell.net>
Reviewed-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agodrivers/char/misc.c: use bitmap/bitops functions for dynamic minor number allocation
Thadeu Lima de Souza Cascardo [Tue, 15 Dec 2009 02:00:31 +0000]
drivers/char/misc.c: use bitmap/bitops functions for dynamic minor number allocation

Use DECLARE_BITMAP(), find_first_zero_bit(), set_bit() and clear_bit()
instead of rewriting code to do it with the minor number dynamic
allocation bitmap.

We need to invert the bit position to keep the code behaviour of using the
last minor numbers first, since we don't have a find_last_zero_bit.

Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agodrivers/char/misc.c: clear allocation bit in minor bitmap when device register fails
Thadeu Lima de Souza Cascardo [Tue, 15 Dec 2009 02:00:30 +0000]
drivers/char/misc.c: clear allocation bit in minor bitmap when device register fails

If there's a failure creating the device (because there's already one with
the same name, for example), the current implementation does not clear the
bit for the allocated minor and that number is lost for future
allocations.

Second, the test currently in misc_deregister is broken, since it does not
test for the 0 minor.

Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoerr.h: add helper function to simplify pointer error checking
Phil Carmody [Tue, 15 Dec 2009 02:00:29 +0000]
err.h: add helper function to simplify pointer error checking

There are quite a few instances in the kernel of checks of pointers both
against NULL and against the errno range, handling both cases identically.
This additional helper function would simplify such code.

[akpm@linux-foundation.org: build fix]
Signed-off-by: Phil Carmody <ext-phil.2.carmody@nokia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoioc3/ioc4: fix error path on driver registration
Jean Delvare [Tue, 15 Dec 2009 02:00:28 +0000]
ioc3/ioc4: fix error path on driver registration

Two IOC3 and IOC4 drivers have broken error paths on registration.  Fix
them.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Pat Gefre <pfg@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoioc3/ioc4: various section fixes
Jean Delvare [Tue, 15 Dec 2009 02:00:27 +0000]
ioc3/ioc4: various section fixes

Several IOC3 and IOC4 drivers misuse the __devinit and __devexit section
markers.  Use __init and __exit instead as appropriate, then add __devinit
and __devexit where they really belong for PCI drivers.

Also make ioc4_serial_init static.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Pat Gefre <pfg@sgi.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agotask_struct: make journal_info conditional
Hiroshi Shimamoto [Tue, 15 Dec 2009 02:00:26 +0000]
task_struct: make journal_info conditional

journal_info in task_struct is used in journaling file system only.  So
introduce CONFIG_FS_JOURNAL_INFO and make it conditional.

Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoMake DEBUG_BUGVERBOSE default to y
Alexey Dobriyan [Tue, 15 Dec 2009 02:00:25 +0000]
Make DEBUG_BUGVERBOSE default to y

It's easy to lose useful DEBUG_BUGVERBOSE by switching EMBEDDED left and right.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agokernel.h: add printk_ratelimited and pr_<level>_rl
Joe Perches [Tue, 15 Dec 2009 02:00:25 +0000]
kernel.h: add printk_ratelimited and pr_<level>_rl

Add a printk_ratelimited statement expression macro that uses a per-call
ratelimit_state so that multiple subsystems output messages are not
suppressed by a global __ratelimit state.

[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: s/_rl/_ratelimited/g]
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Naohiro Ooiwa <nooiwa@miraclelinux.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agomisc: remove MAC pmu function declaration from misc device class
Thadeu Lima de Souza Cascardo [Tue, 15 Dec 2009 02:00:23 +0000]
misc: remove MAC pmu function declaration from misc device class

Commit 8c8709334cec803368a432a33e0f2e116d48fe07 has removed the
pmu_device_init call from misc_init, but unlike other similar commits,
has not removed its declaration.

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agokernel/sys.c: fix "warning: do-while statement is not a compound statement" noise
H Hartley Sweeten [Tue, 15 Dec 2009 02:00:22 +0000]
kernel/sys.c: fix "warning: do-while statement is not a compound statement" noise

do_each_thread/while_each_thread wrap a block of code that is in this format:

for (...)
do
...
while

If curly braces do not surround the inner loop the following warning is
generated by sparse:

warning: do-while statement is not a compound statement

Fix the warning by adding the braces.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agokallsyms: remove deprecated print_fn_descriptor_symbol()
Amerigo Wang [Tue, 15 Dec 2009 02:00:22 +0000]
kallsyms: remove deprecated print_fn_descriptor_symbol()

According to feature-removal-schedule.txt, it is the time to remove
print_fn_descriptor_symbol().

And a quick grep shows that it no longer has any callers.

Signed-off-by: WANG Cong <amwang@redhat.com>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agorwsem: fix rwsem_is_locked() bugs
Amerigo Wang [Tue, 15 Dec 2009 02:00:21 +0000]
rwsem: fix rwsem_is_locked() bugs

rwsem_is_locked() tests ->activity without locks, so we should always keep
->activity consistent.  However, the code in __rwsem_do_wake() breaks this
rule, it updates ->activity after _all_ readers waken up, this may give
some reader a wrong ->activity value, thus cause rwsem_is_locked() behaves
wrong.

Quote from Andrew:

"
- we have one or more processes sleeping in down_read(), waiting for access.

- we wake one or more processes up without altering ->activity

- they start to run and they do rwsem_is_locked().  This incorrectly
  returns "false", because the waker process is still crunching away in
  __rwsem_do_wake().

- the waker now alters ->activity, but it was too late.
"

So we need get a spinlock to protect this.  And rwsem_is_locked() should
not block, thus we use spin_trylock_irqsave().

[akpm@linux-foundation.org: simplify code]
Reported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Cc: Ben Woodard <bwoodard@llnl.gov>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: WANG Cong <amwang@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agorwsem-spinlock: remove useless function exports
Amerigo Wang [Tue, 15 Dec 2009 02:00:20 +0000]
rwsem-spinlock: remove useless function exports

These functions need not to be exported, since no drivers should use them.

__init_rwsem() is an exception, because init_rwsem(), which is a macro,
is used.

Signed-off-by: WANG Cong <amwang@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agokernel.h: remove initialization of bool in printk_once
Joe Perches [Tue, 15 Dec 2009 02:00:19 +0000]
kernel.h: remove initialization of bool in printk_once

Don't initialize __print_once.  Invert the test to reduce initialized
data.

defconfig before: $size vmlinux
   text    data     bss     dec     hex filename
6976022  679572 1359668 9015262  898fde vmlinux

defconfig after: $size vmlinux
   text    data     bss     dec     hex filename
6976006  679508 1359700 9015214  898fae vmlinux

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoinit/main.c: fix symbol shadows noise
H Hartley Sweeten [Tue, 15 Dec 2009 02:00:18 +0000]
init/main.c: fix symbol shadows noise

The symbol 'call' is a static symbol used for initcall_debug.  This same
symbol name is used locally by a couple functions and produces the
following sparse warnings:

warning: symbol 'call' shadows an earlier one

Fix this noise by renaming the local symbols.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agodrivers/misc: add driver for Texas Instruments DAC7512
Daniel Mack [Tue, 15 Dec 2009 02:00:17 +0000]
drivers/misc: add driver for Texas Instruments DAC7512

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: "H Hartley Sweeten" <hartleys@visionengravers.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agogeneric-ipi: cleanup for generic_smp_call_function_interrupt()
Xiao Guangrong [Tue, 15 Dec 2009 02:00:16 +0000]
generic-ipi: cleanup for generic_smp_call_function_interrupt()

Use smp_processor_id() instead of get_cpu() and put_cpu() in
generic_smp_call_function_interrupt(), It's no need to disable preempt,
because we must call generic_smp_call_function_interrupt() with interrupts
disabled.

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoad525x_dpot: new driver for AD525x digital potentiometers
Michael Hennerich [Tue, 15 Dec 2009 02:00:15 +0000]
ad525x_dpot: new driver for AD525x digital potentiometers

This driver supports the non-volatile digital potentiometers via I2C:
AD5258, AD5259, AD5251, AD5252, AD5253, AD5254, and AD5255

It provides a sysfs interface to each device for reading/writing which
is documented in Documentation/misc-devices/ad525x_dpot.txt.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Chris Verges <chrisv@cyberswitching.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agodynamic_debug.h/kernel.h: Remove KBUILD_MODNAME from dynamic_pr_debug
Joe Perches [Tue, 15 Dec 2009 02:00:14 +0000]
dynamic_debug.h/kernel.h: Remove KBUILD_MODNAME from dynamic_pr_debug

If CONFIG_DYNAMIC_DEBUG is enabled and a source file has:

#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/kernel.h>

dynamic_debug.h will duplicate KBUILD_MODNAME
in the output string.

Remove the use of KBUILD_MODNAME from the
output format string generated by dynamic_debug.h

If CONFIG_DYNAMIC_DEBUG is not enabled, no compile-time
check is done to printk/dev_printk arguments.

Add it.

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Jason Baron <jbaron@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoWARN_ONCE(): use bool for boolean flag
Cesar Eduardo Barros [Tue, 15 Dec 2009 02:00:13 +0000]
WARN_ONCE(): use bool for boolean flag

Commit 70867453092297be9afb2249e712a1f960ec0a09 ("printk_once(): use bool
for boolean flag") changed printk_once() to use bool instead of int for
its guard variable.  Do the same change to WARN_ONCE() and WARN_ON_ONCE(),
for the same reasons.

This resulted in a reduction of 1462 bytes on a x86-64 defconfig:

   text    data     bss     dec     hex filename
8101271 1207116  992764 10301151         9d2edf vmlinux.before
8100553 1207148  991988 10299689         9d2929 vmlinux.after

Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.net>
Cc: Roland Dreier <rolandd@cisco.com>
Cc: Daniel Walker <dwalker@fifo99.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agouml: convert to seq_file/proc_fops
Alexey Dobriyan [Tue, 15 Dec 2009 02:00:11 +0000]
uml: convert to seq_file/proc_fops

Convert code away from ->read_proc/->write_proc interfaces.  Switch to
proc_create()/proc_create_data() which make addition of proc entries
reliable wrt NULL ->proc_fops, NULL ->data and so on.

Problem with ->read_proc et al is described here commit
786d7e1612f0b0adb6046f19b906609e4fe8b1ba "Fix rmmod/read/write races in
/proc entries"

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agofloppy: Add an extra bound check on ioctl arguments
Arjan van de Ven [Tue, 15 Dec 2009 02:00:11 +0000]
floppy: Add an extra bound check on ioctl arguments

gcc is not convinced that the floppy.c ioctl has sufficient bound checks:

In function `copy_from_user',
    inlined from `fd_copyin' at drivers/block/floppy.c:3080,
    inlined from `fd_ioctl' at drivers/block/floppy.c:3503:
    arch/x86/include/asm/uaccess_32.h:211:
warning: call to `copy_from_user_overflow' declared with attribute
warning: copy_from_user buffer size is not provably correct

And frankly, as a human I have a hard time proving the same more or less
(the size comes from the ioctl argument.  humpf.  maybe.  the code isn't
very nice)

This patch adds an explicit check to make 100% sure it's safe, better than
finding out later that there indeed was a gap.

[akpm@linux-foundation.org: add WARN_ON()]
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agodrivers/cpuidle: Move dereference after NULL test
Julia Lawall [Tue, 15 Dec 2009 02:00:09 +0000]
drivers/cpuidle: Move dereference after NULL test

It does not seem possible that ldev can be NULL, so drop the unnecessary
test.  If ldev can somehow be NULL, then the initialization of last_idx
should be moved below the test.

A simplified version of the semantic match that detects this problem is as
follows (http://coccinelle.lip6.fr/):

// <smpl>
@match exists@
expression x, E;
identifier fld;
@@

* x->fld
  ... when != \(x = E\|&x\)
* x == NULL
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoconst: constify remaining dev_pm_ops
Alexey Dobriyan [Tue, 15 Dec 2009 02:00:08 +0000]
const: constify remaining dev_pm_ops

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoalpha: convert srm code to seq_file
Alexey Dobriyan [Tue, 15 Dec 2009 02:00:06 +0000]
alpha: convert srm code to seq_file

Convert code away from ->read_proc/->write_proc interfaces.  Switch to
proc_create()/proc_create_data() which make addition of proc entries
reliable wrt NULL ->proc_fops, NULL ->data and so on.

Problem with ->read_proc et al is described here commit
786d7e1612f0b0adb6046f19b906609e4fe8b1ba "Fix rmmod/read/write races in
/proc entries"

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoprocfs: allow threads to rename siblings via /proc/pid/tasks/tid/comm
john stultz [Tue, 15 Dec 2009 02:00:05 +0000]
procfs: allow threads to rename siblings via /proc/pid/tasks/tid/comm

Setting a thread's comm to be something unique is a very useful ability
and is helpful for debugging complicated threaded applications.  However
currently the only way to set a thread name is for the thread to name
itself via the PR_SET_NAME prctl.

However, there may be situations where it would be advantageous for a
thread dispatcher to be naming the threads its managing, rather then
having the threads self-describe themselves.  This sort of behavior is
available on other systems via the pthread_setname_np() interface.

This patch exports a task's comm via proc/pid/comm and
proc/pid/task/tid/comm interfaces, and allows thread siblings to write to
these values.

[akpm@linux-foundation.org: cleanups]
Signed-off-by: John Stultz <johnstul@us.ibm.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Mike Fulton <fultonm@ca.ibm.com>
Cc: Sean Foley <Sean_Foley@ca.ibm.com>
Cc: Darren Hart <dvhltc@us.ibm.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoprocfs: use proper units for noMMU statm
Steven J. Magnani [Tue, 15 Dec 2009 02:00:04 +0000]
procfs: use proper units for noMMU statm

On no-MMU systems, sizes reported in /proc/n/statm have units of bytes.
Per Documentation/filesystems/proc.txt, these values should be in pages.

Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Cc: Greg Ungerer <gerg@snapgear.com>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agonommu: fix malloc performance by adding uninitialized flag
Jie Zhang [Tue, 15 Dec 2009 02:00:02 +0000]
nommu: fix malloc performance by adding uninitialized flag

The NOMMU code currently clears all anonymous mmapped memory.  While this
is what we want in the default case, all memory allocation from userspace
under NOMMU has to go through this interface, including malloc() which is
allowed to return uninitialized memory.  This can easily be a significant
performance penalty.  So for constrained embedded systems were security is
irrelevant, allow people to avoid clearing memory unnecessarily.

This also alters the ELF-FDPIC binfmt such that it obtains uninitialised
memory for the brk and stack region.

Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agomm hugetlb: add hugepage support to pagemap
Naoya Horiguchi [Tue, 15 Dec 2009 02:00:01 +0000]
mm hugetlb: add hugepage support to pagemap

This patch enables extraction of the pfn of a hugepage from
/proc/pid/pagemap in an architecture independent manner.

Details
-------
My test program (leak_pagemap) works as follows:
 - creat() and mmap() a file on hugetlbfs (file size is 200MB == 100 hugepages,)
 - read()/write() something on it,
 - call page-types with option -p,
 - munmap() and unlink() the file on hugetlbfs

Without my patches
------------------
$ ./leak_pagemap
             flags page-count       MB  symbolic-flags                     long-symbolic-flags
0x0000000000000000          1        0  __________________________________
0x0000000000000804          1        0  __R________M______________________ referenced,mmap
0x000000000000086c         81        0  __RU_lA____M______________________ referenced,uptodate,lru,active,mmap
0x0000000000005808          5        0  ___U_______Ma_b___________________ uptodate,mmap,anonymous,swapbacked
0x0000000000005868         12        0  ___U_lA____Ma_b___________________ uptodate,lru,active,mmap,anonymous,swapbacked
0x000000000000586c          1        0  __RU_lA____Ma_b___________________ referenced,uptodate,lru,active,mmap,anonymous,swapbacked
             total        101        0

The output of page-types don't show any hugepage.

With my patches
---------------
$ ./leak_pagemap
             flags page-count       MB  symbolic-flags                     long-symbolic-flags
0x0000000000000000          1        0  __________________________________
0x0000000000030000      51100      199  ________________TG________________ compound_tail,huge
0x0000000000028018        100        0  ___UD__________H_G________________ uptodate,dirty,compound_head,huge
0x0000000000000804          1        0  __R________M______________________ referenced,mmap
0x000000000000080c          1        0  __RU_______M______________________ referenced,uptodate,mmap
0x000000000000086c         80        0  __RU_lA____M______________________ referenced,uptodate,lru,active,mmap
0x0000000000005808          4        0  ___U_______Ma_b___________________ uptodate,mmap,anonymous,swapbacked
0x0000000000005868         12        0  ___U_lA____Ma_b___________________ uptodate,lru,active,mmap,anonymous,swapbacked
0x000000000000586c          1        0  __RU_lA____Ma_b___________________ referenced,uptodate,lru,active,mmap,anonymous,swapbacked
             total      51300      200

The output of page-types shows 51200 pages contributing to hugepages,
containing 100 head pages and 51100 tail pages as expected.

[akpm@linux-foundation.org: build fix]
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agomm: hugetlb: fix hugepage memory leak in walk_page_range()
Naoya Horiguchi [Tue, 15 Dec 2009 01:59:59 +0000]
mm: hugetlb: fix hugepage memory leak in walk_page_range()

Most callers of pmd_none_or_clear_bad() check whether the target page is
in a hugepage or not, but walk_page_range() do not check it.  So if we
read /proc/pid/pagemap for the hugepage on x86 machine, the hugepage
memory is leaked as shown below.  This patch fixes it.

Details
=======
My test program (leak_pagemap) works as follows:
 - creat() and mmap() a file on hugetlbfs (file size is 200MB == 100 hugepages,)
 - read()/write() something on it,
 - call page-types with option -p (walk around the page tables),
 - munmap() and unlink() the file on hugetlbfs

Without my patches
------------------
$ cat /proc/meminfo |grep "HugePage"
HugePages_Total:    1000
HugePages_Free:     1000
HugePages_Rsvd:        0
HugePages_Surp:        0
$ ./leak_pagemap
[snip output]
$ cat /proc/meminfo |grep "HugePage"
HugePages_Total:    1000
HugePages_Free:      900
HugePages_Rsvd:        0
HugePages_Surp:        0
$ ls /hugetlbfs/
$

100 hugepages are accounted as used while there is no file on hugetlbfs.

With my patches
---------------
$ cat /proc/meminfo |grep "HugePage"
HugePages_Total:    1000
HugePages_Free:     1000
HugePages_Rsvd:        0
HugePages_Surp:        0
$ ./leak_pagemap
[snip output]
$ cat /proc/meminfo |grep "HugePage"
HugePages_Total:    1000
HugePages_Free:     1000
HugePages_Rsvd:        0
HugePages_Surp:        0
$ ls /hugetlbfs
$

No memory leaks.

Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: David Rientjes <rientjes@google.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agomm: hugetlb: fix hugepage memory leak in mincore()
Naoya Horiguchi [Tue, 15 Dec 2009 01:59:58 +0000]
mm: hugetlb: fix hugepage memory leak in mincore()

Most callers of pmd_none_or_clear_bad() check whether the target page is
in a hugepage or not, but mincore() and walk_page_range() do not check it.
 So if we use mincore() on a hugepage on x86 machine, the hugepage memory
is leaked as shown below.  This patch fixes it by extending mincore()
system call to support hugepages.

Details
=======
My test program (leak_mincore) works as follows:
 - creat() and mmap() a file on hugetlbfs (file size is 200MB == 100 hugepages,)
 - read()/write() something on it,
 - call mincore() for first ten pages and printf() the values of *vec
 - munmap() and unlink() the file on hugetlbfs

Without my patch
----------------
$ cat /proc/meminfo| grep "HugePage"
HugePages_Total:    1000
HugePages_Free:     1000
HugePages_Rsvd:        0
HugePages_Surp:        0
$ ./leak_mincore
vec[0] 0
vec[1] 0
vec[2] 0
vec[3] 0
vec[4] 0
vec[5] 0
vec[6] 0
vec[7] 0
vec[8] 0
vec[9] 0
$ cat /proc/meminfo |grep "HugePage"
HugePages_Total:    1000
HugePages_Free:      999
HugePages_Rsvd:        0
HugePages_Surp:        0
$ ls /hugetlbfs/
$

Return values in *vec from mincore() are set to 0, while the hugepage
should be in memory, and 1 hugepage is still accounted as used while
there is no file on hugetlbfs.

With my patch
-------------
$ cat /proc/meminfo| grep "HugePage"
HugePages_Total:    1000
HugePages_Free:     1000
HugePages_Rsvd:        0
HugePages_Surp:        0
$ ./leak_mincore
vec[0] 1
vec[1] 1
vec[2] 1
vec[3] 1
vec[4] 1
vec[5] 1
vec[6] 1
vec[7] 1
vec[8] 1
vec[9] 1
$ cat /proc/meminfo |grep "HugePage"
HugePages_Total:    1000
HugePages_Free:     1000
HugePages_Rsvd:        0
HugePages_Surp:        0
$ ls /hugetlbfs/
$

Return value in *vec set to 1 and no memory leaks.

[akpm@linux-foundation.org: cleanup]
[akpm@linux-foundation.org: build fix]
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: David Rientjes <rientjes@google.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agohugetlb: abort a hugepage pool resize if a signal is pending
Mel Gorman [Tue, 15 Dec 2009 01:59:56 +0000]
hugetlb: abort a hugepage pool resize if a signal is pending

If a user asks for a hugepage pool resize but specified a large number,
the machine can begin trashing.  In response, they might hit ctrl-c but
signals are ignored and the pool resize continues until it fails an
allocation.  This can take a considerable amount of time so this patch
aborts a pool resize if a signal is pending.

Suggested by Dave Hansen.

Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Cc: Dave Hansen <dave@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agomlock: replace stale comments in munlock_vma_page()
Lee Schermerhorn [Tue, 15 Dec 2009 01:59:55 +0000]
mlock: replace stale comments in munlock_vma_page()

Cleanup stale comments on munlock_vma_page().

Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Acked-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agomm: remove unevictable_migrate_page function
Lee Schermerhorn [Tue, 15 Dec 2009 01:59:54 +0000]
mm: remove unevictable_migrate_page function

unevictable_migrate_page() in mm/internal.h is a relic of the since
removed UNEVICTABLE_LRU Kconfig option.  This patch removes the function
and open codes the test in migrate_page_copy().

Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Reviewed-by: Christoph Lameter <cl@linux-foundation.org>
Acked-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agohugetlb: acquire the i_mmap_lock before walking the prio_tree to unmap a page
Mel Gorman [Tue, 15 Dec 2009 01:59:53 +0000]
hugetlb: acquire the i_mmap_lock before walking the prio_tree to unmap a page

When the owner of a mapping fails COW because a child process is holding a
reference, the children VMAs are walked and the page is unmapped.  The
i_mmap_lock is taken for the unmapping of the page but not the walking of
the prio_tree.  In theory, that tree could be changing if the lock is not
held.  This patch takes the i_mmap_lock properly for the duration of the
prio_tree walk.

[hugh.dickins@tiscali.co.uk: Spotted the problem in the first place]
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years ago'sysctl_max_map_count' should be non-negative
Amerigo Wang [Tue, 15 Dec 2009 01:59:52 +0000]
'sysctl_max_map_count' should be non-negative

Jan Engelhardt reported we have this problem:

setting max_map_count to a value large enough results in programs dying at
first try.  This is on 2.6.31.6:

15:59 borg:/proc/sys/vm # echo $[1<<31-1] >max_map_count
15:59 borg:/proc/sys/vm # cat max_map_count
1073741824
15:59 borg:/proc/sys/vm # echo $[1<<31] >max_map_count
15:59 borg:/proc/sys/vm # cat max_map_count
Killed

This is because we have a chance to make 'max_map_count' negative.  but
it's meaningless.  Make it only accept non-negative values.

Reported-by: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: WANG Cong <amwang@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: James Morris <jmorris@namei.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoinclude/linux/mm.h: remove unneeded ifdef
Huang Shijie [Tue, 15 Dec 2009 01:59:51 +0000]
include/linux/mm.h: remove unneeded ifdef

The check code for CONFIG_SWAP is redundant, because there is a
non-CONFIG_SWAP version for PageSwapCache() which just returns 0.

Signed-off-by: Huang Shijie <shijie8@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agomm: uncached vma support with writenotify
Magnus Damm [Tue, 15 Dec 2009 01:59:49 +0000]
mm: uncached vma support with writenotify

Modify the generic mmap() code to keep the cache attribute in
vma->vm_page_prot regardless if writenotify is enabled or not.  Without
this patch the cache configuration selected by f_op->mmap() is overwritten
if writenotify is enabled, making it impossible to keep the vma uncached.

Needed by drivers such as drivers/video/sh_mobile_lcdcfb.c which uses
deferred io together with uncached memory.

Signed-off-by: Magnus Damm <damm@opensource.se>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Jaya Kumar <jayakumar.lkml@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>