6 years agotarget: Add generation of LOGICAL BLOCK ADDRESS OUT OF RANGE
Roland Dreier [Mon, 16 Jul 2012 22:34:21 +0000]
target: Add generation of LOGICAL BLOCK ADDRESS OUT OF RANGE

commit e2397c704429025bc6b331a970f699e52f34283e upstream.

Many SCSI commands are defined to return a CHECK CONDITION / ILLEGAL
REQUEST with ASC set to LOGICAL BLOCK ADDRESS OUT OF RANGE if the
initiator sends a command that accesses a too-big LBA.  Add an enum
value and case entries so that target code can return this status.

Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoLinux 3.4.7
Greg Kroah-Hartman [Sun, 29 Jul 2012 15:04:57 +0000]
Linux 3.4.7

6 years agocifs: when CONFIG_HIGHMEM is set, serialize the read/write kmaps
Jeff Layton [Wed, 11 Jul 2012 13:09:36 +0000]
cifs: when CONFIG_HIGHMEM is set, serialize the read/write kmaps

commit 3cf003c08be785af4bee9ac05891a15bcbff856a upstream.

[The async read code was broadened to include uncached reads in 3.5, so
the mainline patch did not apply directly. This patch is just a backport
to account for that change.]

Jian found that when he ran fsx on a 32 bit arch with a large wsize the
process and one of the bdi writeback kthreads would sometimes deadlock
with a stack trace like this:

crash> bt
PID: 2789   TASK: f02edaa0  CPU: 3   COMMAND: "fsx"
 #0 [eed63cbc] schedule at c083c5b3
 #1 [eed63d80] kmap_high at c0500ec8
 #2 [eed63db0] cifs_async_writev at f7fabcd7 [cifs]
 #3 [eed63df0] cifs_writepages at f7fb7f5c [cifs]
 #4 [eed63e50] do_writepages at c04f3e32
 #5 [eed63e54] __filemap_fdatawrite_range at c04e152a
 #6 [eed63ea4] filemap_fdatawrite at c04e1b3e
 #7 [eed63eb4] cifs_file_aio_write at f7fa111a [cifs]
 #8 [eed63ecc] do_sync_write at c052d202
 #9 [eed63f74] vfs_write at c052d4ee
#10 [eed63f94] sys_write at c052df4c
#11 [eed63fb0] ia32_sysenter_target at c0409a98
    EAX: 00000004  EBX: 00000003  ECX: abd73b73  EDX: 012a65c6
    DS:  007b      ESI: 012a65c6  ES:  007b      EDI: 00000000
    SS:  007b      ESP: bf8db178  EBP: bf8db1f8  GS:  0033
    CS:  0073      EIP: 40000424  ERR: 00000004  EFLAGS: 00000246

Each task would kmap part of its address array before getting stuck, but
not enough to actually issue the write.

This patch fixes this by serializing the marshal_iov operations for
async reads and writes. The idea here is to ensure that cifs
aggressively tries to populate a request before attempting to fulfill
another one. As soon as all of the pages are kmapped for a request, then
we can unlock and allow another one to proceed.

There's no need to do this serialization on non-CONFIG_HIGHMEM arches
however, so optimize all of this out when CONFIG_HIGHMEM isn't set.

Reported-by: Jian Li <jiali@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoARM: SAMSUNG: Update default rate for xusbxti clock
Tushar Behera [Thu, 12 Jul 2012 09:06:28 +0000]
ARM: SAMSUNG: Update default rate for xusbxti clock

commit bdd3cc26ba651e33780ade33f1410320cf2d0cf4 upstream.

The rate of xusbxti clock is set in individual machine files.
The default value should be defined at the clock definition
and individual machine files should modify it if required.

Division by zero in kernel.
[<c0011849>] (unwind_backtrace+0x1/0x9c) from [<c022c663>] (Ldiv0+0x9/0x12)
[<c022c663>] (Ldiv0+0x9/0x12) from [<c001a3c3>] (s3c_setrate_clksrc+0x33/0x78)
[<c001a3c3>] (s3c_setrate_clksrc+0x33/0x78) from [<c0019e67>] (clk_set_rate+0x2f/0x78)

Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agodm raid1: set discard_zeroes_data_unsupported
Mikulas Patocka [Fri, 20 Jul 2012 13:25:07 +0000]
dm raid1: set discard_zeroes_data_unsupported

commit 7c8d3a42fe1c58a7e8fd3f6a013e7d7b474ff931 upstream.

We can't guarantee that REQ_DISCARD on dm-mirror zeroes the data even if
the underlying disks support zero on discard.  So this patch sets
ti->discard_zeroes_data_unsupported.

For example, if the mirror is in the process of resynchronizing, it may
happen that kcopyd reads a piece of data, then discard is sent on the
same area and then kcopyd writes the piece of data to another leg.
Consequently, the data is not zeroed.

The flag was made available by commit 983c7db347db8ce2d8453fd1d89b7a4bb6920d56
(dm crypt: always disable discard_zeroes_data).

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agodm raid1: fix crash with mirror recovery and discard
Mikulas Patocka [Fri, 20 Jul 2012 13:25:03 +0000]
dm raid1: fix crash with mirror recovery and discard

commit 751f188dd5ab95b3f2b5f2f467c38aae5a2877eb upstream.

This patch fixes a crash when a discard request is sent during mirror
recovery.

Firstly, some background.  Generally, the following sequence happens during
mirror synchronization:
- function do_recovery is called
- do_recovery calls dm_rh_recovery_prepare
- dm_rh_recovery_prepare uses a semaphore to limit the number
  simultaneously recovered regions (by default the semaphore value is 1,
  so only one region at a time is recovered)
- dm_rh_recovery_prepare calls __rh_recovery_prepare,
  __rh_recovery_prepare asks the log driver for the next region to
  recover. Then, it sets the region state to DM_RH_RECOVERING. If there
  are no pending I/Os on this region, the region is added to
  quiesced_regions list. If there are pending I/Os, the region is not
  added to any list. It is added to the quiesced_regions list later (by
  dm_rh_dec function) when all I/Os finish.
- when the region is on quiesced_regions list, there are no I/Os in
  flight on this region. The region is popped from the list in
  dm_rh_recovery_start function. Then, a kcopyd job is started in the
  recover function.
- when the kcopyd job finishes, recovery_complete is called. It calls
  dm_rh_recovery_end. dm_rh_recovery_end adds the region to
  recovered_regions or failed_recovered_regions list (depending on
  whether the copy operation was successful or not).

The above mechanism assumes that if the region is in DM_RH_RECOVERING
state, no new I/Os are started on this region. When I/O is started,
dm_rh_inc_pending is called, which increases reg->pending count. When
I/O is finished, dm_rh_dec is called. It decreases reg->pending count.
If the count is zero and the region was in DM_RH_RECOVERING state,
dm_rh_dec adds it to the quiesced_regions list.

Consequently, if we call dm_rh_inc_pending/dm_rh_dec while the region is
in DM_RH_RECOVERING state, it could be added to quiesced_regions list
multiple times or it could be added to this list when kcopyd is copying
data (it is assumed that the region is not on any list while kcopyd does
its jobs). This results in memory corruption and crash.

There already exist bypasses for REQ_FLUSH requests: REQ_FLUSH requests
do not belong to any region, so they are always added to the sync list
in do_writes. dm_rh_inc_pending does not increase count for REQ_FLUSH
requests. In mirror_end_io, dm_rh_dec is never called for REQ_FLUSH
requests. These bypasses avoid the crash possibility described above.

These bypasses were improperly implemented for REQ_DISCARD when
the mirror target gained discard support in commit
5fc2ffeabb9ee0fc0e71ff16b49f34f0ed3d05b4 (dm raid1: support discard).

In do_writes, REQ_DISCARD requests is always added to the sync queue and
immediately dispatched (even if the region is in DM_RH_RECOVERING).  However,
dm_rh_inc and dm_rh_dec is called for REQ_DISCARD resusts.  So it violates the
rule that no I/Os are started on DM_RH_RECOVERING regions, and causes the list
corruption described above.

This patch changes it so that REQ_DISCARD requests follow the same path
as REQ_FLUSH. This avoids the crash.

Reference: https://bugzilla.redhat.com/837607

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agodm thin: do not send discards to shared blocks
Mikulas Patocka [Fri, 20 Jul 2012 13:25:05 +0000]
dm thin: do not send discards to shared blocks

commit 650d2a06b4fe1cc1d218c20e256650f68bf0ca31 upstream.

When process_discard receives a partial discard that doesn't cover a
full block, it sends this discard down to that block. Unfortunately, the
block can be shared and the discard would corrupt the other snapshots
sharing this block.

This patch detects block sharing and ends the discard with success when
sending it to the shared block.

The above change means that if the device supports discard it can't be
guaranteed that a discard request zeroes data. Therefore, we set
ti->discard_zeroes_data_unsupported.

Thin target discard support with this bug arrived in commit
104655fd4dcebd50068ef30253a001da72e3a081 (dm thin: support discards).

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agopnfs-obj: don't leak objio_state if ore_write/read fails
Boaz Harrosh [Fri, 8 Jun 2012 02:29:40 +0000]
pnfs-obj: don't leak objio_state if ore_write/read fails

commit 9909d45a8557455ca5f8ee7af0f253debc851f1a upstream.

[Bug since 3.2 Kernel]
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoore: Remove support of partial IO request (NFS crash)
Boaz Harrosh [Fri, 8 Jun 2012 01:30:40 +0000]
ore: Remove support of partial IO request (NFS crash)

commit 62b62ad873f2accad9222a4d7ffbe1e93f6714c1 upstream.

Do to OOM situations the ore might fail to allocate all resources
needed for IO of the full request. If some progress was possible
it would proceed with a partial/short request, for the sake of
forward progress.

Since this crashes NFS-core and exofs is just fine without it just
remove this contraption, and fail.

TODO:
Support real forward progress with some reserved allocations
of resources, such as mem pools and/or bio_sets

[Bug since 3.2 Kernel]
CC: Benny Halevy <bhalevy@tonian.com>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoore: Fix NFS crash by supporting any unaligned RAID IO
Boaz Harrosh [Thu, 7 Jun 2012 22:19:07 +0000]
ore: Fix NFS crash by supporting any unaligned RAID IO

commit 9ff19309a9623f2963ac5a136782ea4d8b5d67fb upstream.

In RAID_5/6 We used to not permit an IO that it's end
byte is not stripe_size aligned and spans more than one stripe.
.i.e the caller must check if after submission the actual
transferred bytes is shorter, and would need to resubmit
a new IO with the remainder.

Exofs supports this, and NFS was supposed to support this
as well with it's short write mechanism. But late testing has
exposed a CRASH when this is used with none-RPC layout-drivers.

The change at NFS is deep and risky, in it's place the fix
at ORE to lift the limitation is actually clean and simple.
So here it is below.

The principal here is that in the case of unaligned IO on
both ends, beginning and end, we will send two read requests
one like old code, before the calculation of the first stripe,
and also a new site, before the calculation of the last stripe.
If any "boundary" is aligned or the complete IO is within a single
stripe. we do a single read like before.

The code is clean and simple by splitting the old _read_4_write
into 3 even parts:
1._read_4_write_first_stripe
2. _read_4_write_last_stripe
3. _read_4_write_execute

And calling 1+3 at the same place as before. 2+3 before last
stripe, and in the case of all in a single stripe then 1+2+3
is preformed additively.

Why did I not think of it before. Well I had a strike of
genius because I have stared at this code for 2 years, and did
not find this simple solution, til today. Not that I did not try.

This solution is much better for NFS than the previous supposedly
solution because the short write was dealt  with out-of-band after
IO_done, which would cause for a seeky IO pattern where as in here
we execute in order. At both solutions we do 2 separate reads, only
here we do it within a single IO request. (And actually combine two
writes into a single submission)

NFS/exofs code need not change since the ORE API communicates the new
shorter length on return, what will happen is that this case would not
occur anymore.

hurray!!

[Stable this is an NFS bug since 3.2 Kernel should apply cleanly]
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoUBIFS: fix a bug in empty space fix-up
Artem Bityutskiy [Sat, 14 Jul 2012 11:33:09 +0000]
UBIFS: fix a bug in empty space fix-up

commit c6727932cfdb13501108b16c38463c09d5ec7a74 upstream.

UBIFS has a feature called "empty space fix-up" which is a quirk to work-around
limitations of dumb flasher programs. Namely, of those flashers that are unable
to skip NAND pages full of 0xFFs while flashing, resulting in empty space at
the end of half-filled eraseblocks to be unusable for UBIFS. This feature is
relatively new (introduced in v3.0).

The fix-up routine (fixup_free_space()) is executed only once at the very first
mount if the superblock has the 'space_fixup' flag set (can be done with -F
option of mkfs.ubifs). It basically reads all the UBIFS data and metadata and
writes it back to the same LEB. The routine assumes the image is pristine and
does not have anything in the journal.

There was a bug in 'fixup_free_space()' where it fixed up the log incorrectly.
All but one LEB of the log of a pristine file-system are empty. And one
contains just a commit start node. And 'fixup_free_space()' just unmapped this
LEB, which resulted in wiping the commit start node. As a result, some users
were unable to mount the file-system next time with the following symptom:

UBIFS error (pid 1): replay_log_leb: first log node at LEB 3:0 is not CS node
UBIFS error (pid 1): replay_log_leb: log error detected while replaying the log at LEB 3:0

The root-cause of this bug was that 'fixup_free_space()' wrongly assumed
that the beginning of empty space in the log head (c->lhead_offs) was known
on mount. However, it is not the case - it was always 0. UBIFS does not store
in it the master node and finds out by scanning the log on every mount.

The fix is simple - just pass commit start node size instead of 0 to
'fixup_leb()'.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com>
Reported-by: Iwo Mergler <Iwo.Mergler@netcommwireless.com>
Tested-by: Iwo Mergler <Iwo.Mergler@netcommwireless.com>
Reported-by: James Nute <newten82@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoMIPS: Properly align the .data..init_task section.
David Daney [Thu, 19 Jul 2012 07:11:14 +0000]
MIPS: Properly align the .data..init_task section.

commit 7b1c0d26a8e272787f0f9fcc5f3e8531df3b3409 upstream.

Improper alignment can lead to unbootable systems and/or random
crashes.

[ralf@linux-mips.org: This is a lond standing bug since
6eb10bc9e2deab06630261cd05c4cb1e9a60e980 (kernel.org) rsp.
c422a10917f75fd19fa7fe070aaaa23e384dae6f (lmo) [MIPS: Clean up linker script
using new linker script macros.] so dates back to 2.6.32.]

Signed-off-by: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3881/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoHID: multitouch: Add support for Baanto touchscreen
Jiri Kosina [Fri, 20 Apr 2012 10:15:44 +0000]
HID: multitouch: Add support for Baanto touchscreen

commit 9ed326951806c424b42dcf2e1125e25a98fb13d1 upstream.

Reported-by: Tvrtko Ursulin <tvrtko.ursulin@onelan.co.uk>
Tested-by: Tvrtko Ursulin <tvrtko.ursulin@onelan.co.uk>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoHID: add Sennheiser BTD500USB device support
Frank Kunz [Thu, 5 Jul 2012 20:32:49 +0000]
HID: add Sennheiser BTD500USB device support

commit 0e050923a797c1fc46ccc1e5182fd3090f33a75d upstream.

The Sennheiser BTD500USB composit device requires the
HID_QUIRK_NOGET flag to be set for working proper. Without the
flag the device crashes during hid intialization.

Signed-off-by: Frank Kunz <xxxxxmichl@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoHID: add battery quirk for Apple Wireless ANSI
Daniel Nicoletti [Wed, 4 Jul 2012 13:20:31 +0000]
HID: add battery quirk for Apple Wireless ANSI

commit 0c47935c5b5cd4916cf1c1ed4a2894807f7bcc3e upstream.

Add USB_DEVICE_ID_APPLE_ALU_WIRELESS_ANSI, to the quirk list since it report
wrong feature type and wrong percentage range.

Signed-off-by: Daniel Nicoletti <dantti12@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agomm: fix lost kswapd wakeup in kswapd_stop()
Aaditya Kumar [Tue, 17 Jul 2012 22:48:07 +0000]
mm: fix lost kswapd wakeup in kswapd_stop()

commit 1c7e7f6c0703d03af6bcd5ccc11fc15d23e5ecbe upstream.

Offlining memory may block forever, waiting for kswapd() to wake up
because kswapd() does not check the event kthread->should_stop before
sleeping.

The proper pattern, from Documentation/memory-barriers.txt, is:

   ---  waker  ---
   event_indicated = 1;
   wake_up_process(event_daemon);

   ---  sleeper  ---
   for (;;) {
      set_current_state(TASK_UNINTERRUPTIBLE);
      if (event_indicated)
         break;
      schedule();
   }

   set_current_state() may be wrapped by:
      prepare_to_wait();

In the kswapd() case, event_indicated is kthread->should_stop.

  === offlining memory (waker) ===
   kswapd_stop()
      kthread_stop()
         kthread->should_stop = 1
         wake_up_process()
         wait_for_completion()

  ===  kswapd_try_to_sleep (sleeper) ===
   kswapd_try_to_sleep()
      prepare_to_wait()
           .
           .
      schedule()
           .
           .
      finish_wait()

The schedule() needs to be protected by a test of kthread->should_stop,
which is wrapped by kthread_should_stop().

Reproducer:
   Do heavy file I/O in background.
   Do a memory offline/online in a tight loop

Signed-off-by: Aaditya Kumar <aaditya.kumar@ap.sony.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: Minchan Kim <minchan@kernel.org>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoext4: fix duplicated mnt_drop_write call in EXT4_IOC_MOVE_EXT
Al Viro [Wed, 18 Jul 2012 08:31:36 +0000]
ext4: fix duplicated mnt_drop_write call in EXT4_IOC_MOVE_EXT

commit 331ae4962b975246944ea039697a8f1cadce42bb upstream.

Caused, AFAICS, by mismerge in commit ff9cb1c4eead ("Merge branch
'for_linus' into for_linus_merged")

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agotcm_fc: Fix crash seen with aborts and large reads
Mark Rustad [Sat, 14 Jul 2012 01:18:04 +0000]
tcm_fc: Fix crash seen with aborts and large reads

commit 3cc5d2a6b9a2fd1bf024aa5e52dd22961eecaf13 upstream.

This patch fixes a crash seen when large reads have their exchange
aborted by either timing out or being reset. Because the exchange
abort results in the seq pointer being set to NULL, because the
sequence is no longer valid, it must not be dereferenced. This
patch changes the function ft_get_task_tag to return ~0 if it is
unable to get the tag for this reason. Because the get_task_tag
interface provides no means of returning an error, this seems
like the best way to fix this issue at the moment.

Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agontp: Fix STA_INS/DEL clearing bug
John Stultz [Fri, 13 Jul 2012 05:21:50 +0000]
ntp: Fix STA_INS/DEL clearing bug

commit 6b1859dba01c7d512b72d77e3fd7da8354235189 upstream.

In commit 6b43ae8a619d17c4935c3320d2ef9e92bdeed05d, I
introduced a bug that kept the STA_INS or STA_DEL bit
from being cleared from time_status via adjtimex()
without forcing STA_PLL first.

Usually once the STA_INS is set, it isn't cleared
until the leap second is applied, so its unlikely this
affected anyone. However during testing I noticed it
took some effort to cancel a leap second once STA_INS
was set.

Signed-off-by: John Stultz <johnstul@us.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Link: http://lkml.kernel.org/r/1342156917-25092-2-git-send-email-john.stultz@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agotarget: Fix range calculation in WRITE SAME emulation when num blocks == 0
Roland Dreier [Tue, 17 Jul 2012 00:10:17 +0000]
target: Fix range calculation in WRITE SAME emulation when num blocks == 0

commit 1765fe5edcb83f53fc67edeb559fcf4bc82c6460 upstream.

When NUMBER OF LOGICAL BLOCKS is 0, WRITE SAME is supposed to write
all the blocks from the specified LBA through the end of the device.
However, dev->transport->get_blocks(dev) (perhaps confusingly) returns
the last valid LBA rather than the number of blocks, so the correct
number of blocks to write starting with lba is

dev->transport->get_blocks(dev) - lba + 1

(nab: Backport roland's for-3.6 patch to for-3.5)

Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agotarget: Clean up returning errors in PR handling code
Roland Dreier [Mon, 16 Jul 2012 22:17:10 +0000]
target: Clean up returning errors in PR handling code

commit d35212f3ca3bf4fb49d15e37f530c9931e2d2183 upstream.

 - instead of (PTR_ERR(file) < 0) just use IS_ERR(file)
 - return -EINVAL instead of EINVAL
 - all other error returns in target_scsi3_emulate_pr_out() use
   "goto out" -- get rid of the one remaining straight "return."

Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agocifs: on CONFIG_HIGHMEM machines, limit the rsize/wsize to the kmap space
Jeff Layton [Wed, 11 Jul 2012 13:09:35 +0000]
cifs: on CONFIG_HIGHMEM machines, limit the rsize/wsize to the kmap space

commit 3ae629d98bd5ed77585a878566f04f310adbc591 upstream.

We currently rely on being able to kmap all of the pages in an async
read or write request. If you're on a machine that has CONFIG_HIGHMEM
set then that kmap space is limited, sometimes to as low as 512 slots.

With 512 slots, we can only support up to a 2M r/wsize, and that's
assuming that we can get our greedy little hands on all of them. There
are other users however, so it's possible we'll end up stuck with a
size that large.

Since we can't handle a rsize or wsize larger than that currently, cap
those options at the number of kmap slots we have. We could consider
capping it even lower, but we currently default to a max of 1M. Might as
well allow those luddites on 32 bit arches enough rope to hang
themselves.

A more robust fix would be to teach the send and receive routines how
to contend with an array of pages so we don't need to marshal up a kvec
array at all. That's a fairly significant overhaul though, so we'll need
this limit in place until that's ready.

Reported-by: Jian Li <jiali@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agocifs: always update the inode cache with the results from a FIND_*
Jeff Layton [Fri, 6 Jul 2012 11:09:42 +0000]
cifs: always update the inode cache with the results from a FIND_*

commit cd60042cc1392e79410dc8de9e9c1abb38a29e57 upstream.

When we get back a FIND_FIRST/NEXT result, we have some info about the
dentry that we use to instantiate a new inode. We were ignoring and
discarding that info when we had an existing dentry in the cache.

Fix this by updating the inode in place when we find an existing dentry
and the uniqueid is the same.

Reported-and-Tested-by: Andrew Bartlett <abartlet@samba.org>
Reported-by: Bill Robertson <bill_robertson@debortoli.com.au>
Reported-by: Dion Edwards <dion_edwards@debortoli.com.au>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agomd/raid1: close some possible races on write errors during resync
NeilBrown [Thu, 19 Jul 2012 05:59:18 +0000]
md/raid1: close some possible races on write errors during resync

commit 58e94ae18478c08229626daece2fc108a4a23261 upstream.

commit 4367af556133723d0f443e14ca8170d9447317cb
   md/raid1: clear bad-block record when write succeeds.

Added a 'reschedule_retry' call possibility at the end of
end_sync_write, but didn't add matching code at the end of
sync_request_write.  So if the writes complete very quickly, or
scheduling makes it seem that way, then we can miss rescheduling
the request and the resync could hang.

Also commit 73d5c38a9536142e062c35997b044e89166e063b
    md: avoid races when stopping resync.

Fix a race condition in this same code in end_sync_write but didn't
make the change in sync_request_write.

This patch updates sync_request_write to fix both of those.
Patch is suitable for 3.1 and later kernels.

Reported-by: Alexander Lyakas <alex.bolshoy@gmail.com>
Original-version-by: Alexander Lyakas <alex.bolshoy@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agomd: avoid crash when stopping md array races with closing other open fds.
NeilBrown [Thu, 19 Jul 2012 05:59:18 +0000]
md: avoid crash when stopping md array races with closing other open fds.

commit a05b7ea03d72f36edb0cec05e8893803335c61a0 upstream.

md will refuse to stop an array if any other fd (or mounted fs) is
using it.
When any fs is unmounted of when the last open fd is closed all
pending IO will be flushed (e.g. sync_blockdev call in __blkdev_put)
so there will be no pending IO to worry about when the array is
stopped.

However in order to send the STOP_ARRAY ioctl to stop the array one
must first get and open fd on the block device.
If some fd is being used to write to the block device and it is closed
after mdadm open the block device, but before mdadm issues the
STOP_ARRAY ioctl, then there will be no last-close on the md device so
__blkdev_put will not call sync_blockdev.

If this happens, then IO can still be in-flight while md tears down
the array and bad things can happen (use-after-free and subsequent
havoc).

So in the case where do_md_stop is being called from an open file
descriptor, call sync_block after taking the mutex to ensure there
will be no new openers.

This is needed when setting a read-write device to read-only too.

Reported-by: majianpeng <majianpeng@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoLinux 3.4.6
Greg Kroah-Hartman [Thu, 19 Jul 2012 19:11:49 +0000]
Linux 3.4.6

6 years agoNFC: Export nfc.h to userland
Samuel Ortiz [Thu, 10 May 2012 17:45:51 +0000]
NFC: Export nfc.h to userland

commit dbd4fcaf8d664fab4163b1f8682e41ad8bff3444 upstream.

The netlink commands and attributes, along with the socket structure
definitions need to be exported.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agotimekeeping: Add missing update call in timekeeping_resume()
Thomas Gleixner [Tue, 17 Jul 2012 06:39:56 +0000]
timekeeping: Add missing update call in timekeeping_resume()

This is a backport of 3e997130bd2e8c6f5aaa49d6e3161d4d29b43ab0

The leap second rework unearthed another issue of inconsistent data.

On timekeeping_resume() the timekeeper data is updated, but nothing
calls timekeeping_update(), so now the update code in the timer
interrupt sees stale values.

This has been the case before those changes, but then the timer
interrupt was using stale data as well so this went unnoticed for quite
some time.

Add the missing update call, so all the data is consistent everywhere.

Reported-by: Andreas Schwab <schwab@linux-m68k.org>
Reported-and-tested-by: "Rafael J. Wysocki" <rjw@sisk.pl>
Reported-and-tested-by: Martin Steigerwald <Martin@lichtvoll.de>
Cc: John Stultz <johnstul@us.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>,
Cc: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agohrtimer: Update hrtimer base offsets each hrtimer_interrupt
John Stultz [Tue, 17 Jul 2012 06:39:55 +0000]
hrtimer: Update hrtimer base offsets each hrtimer_interrupt

This is a backport of 5baefd6d84163443215f4a99f6a20f054ef11236

The update of the hrtimer base offsets on all cpus cannot be made
atomically from the timekeeper.lock held and interrupt disabled region
as smp function calls are not allowed there.

clock_was_set(), which enforces the update on all cpus, is called
either from preemptible process context in case of do_settimeofday()
or from the softirq context when the offset modification happened in
the timer interrupt itself due to a leap second.

In both cases there is a race window for an hrtimer interrupt between
dropping timekeeper lock, enabling interrupts and clock_was_set()
issuing the updates. Any interrupt which arrives in that window will
see the new time but operate on stale offsets.

So we need to make sure that an hrtimer interrupt always sees a
consistent state of time and offsets.

ktime_get_update_offsets() allows us to get the current monotonic time
and update the per cpu hrtimer base offsets from hrtimer_interrupt()
to capture a consistent state of monotonic time and the offsets. The
function replaces the existing ktime_get() calls in hrtimer_interrupt().

The overhead of the new function vs. ktime_get() is minimal as it just
adds two store operations.

This ensures that any changes to realtime or boottime offsets are
noticed and stored into the per-cpu hrtimer base structures, prior to
any hrtimer expiration and guarantees that timers are not expired early.

Signed-off-by: John Stultz <johnstul@us.ibm.com>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Prarit Bhargava <prarit@redhat.com>
Link: http://lkml.kernel.org/r/1341960205-56738-8-git-send-email-johnstul@us.ibm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agotimekeeping: Provide hrtimer update function
Thomas Gleixner [Tue, 17 Jul 2012 06:39:54 +0000]
timekeeping: Provide hrtimer update function

This is a backport of f6c06abfb3972ad4914cef57d8348fcb2932bc3b

To finally fix the infamous leap second issue and other race windows
caused by functions which change the offsets between the various time
bases (CLOCK_MONOTONIC, CLOCK_REALTIME and CLOCK_BOOTTIME) we need a
function which atomically gets the current monotonic time and updates
the offsets of CLOCK_REALTIME and CLOCK_BOOTTIME with minimalistic
overhead. The previous patch which provides ktime_t offsets allows us
to make this function almost as cheap as ktime_get() which is going to
be replaced in hrtimer_interrupt().

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: John Stultz <johnstul@us.ibm.com>
Link: http://lkml.kernel.org/r/1341960205-56738-7-git-send-email-johnstul@us.ibm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agohrtimers: Move lock held region in hrtimer_interrupt()
Thomas Gleixner [Tue, 17 Jul 2012 06:39:53 +0000]
hrtimers: Move lock held region in hrtimer_interrupt()

This is a backport of 196951e91262fccda81147d2bcf7fdab08668b40

We need to update the base offsets from this code and we need to do
that under base->lock. Move the lock held region around the
ktime_get() calls. The ktime_get() calls are going to be replaced with
a function which gets the time and the offsets atomically.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: John Stultz <johnstul@us.ibm.com>
Link: http://lkml.kernel.org/r/1341960205-56738-6-git-send-email-johnstul@us.ibm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agotimekeeping: Maintain ktime_t based offsets for hrtimers
Thomas Gleixner [Tue, 17 Jul 2012 06:39:52 +0000]
timekeeping: Maintain ktime_t based offsets for hrtimers

This is a backport of 5b9fe759a678e05be4937ddf03d50e950207c1c0

We need to update the hrtimer clock offsets from the hrtimer interrupt
context. To avoid conversions from timespec to ktime_t maintain a
ktime_t based representation of those offsets in the timekeeper. This
puts the conversion overhead into the code which updates the
underlying offsets and provides fast accessible values in the hrtimer
interrupt.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Stultz <johnstul@us.ibm.com>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Prarit Bhargava <prarit@redhat.com>
Link: http://lkml.kernel.org/r/1341960205-56738-4-git-send-email-johnstul@us.ibm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agotimekeeping: Fix leapsecond triggered load spike issue
John Stultz [Tue, 17 Jul 2012 06:39:51 +0000]
timekeeping: Fix leapsecond triggered load spike issue

This is a backport of 4873fa070ae84a4115f0b3c9dfabc224f1bc7c51

The timekeeping code misses an update of the hrtimer subsystem after a
leap second happened. Due to that timers based on CLOCK_REALTIME are
either expiring a second early or late depending on whether a leap
second has been inserted or deleted until an operation is initiated
which causes that update. Unless the update happens by some other
means this discrepancy between the timekeeping and the hrtimer data
stays forever and timers are expired either early or late.

The reported immediate workaround - $ data -s "`date`" - is causing a
call to clock_was_set() which updates the hrtimer data structures.
See: http://www.sheeri.com/content/mysql-and-leap-second-high-cpu-and-fix

Add the missing clock_was_set() call to update_wall_time() in case of
a leap second event. The actual update is deferred to softirq context
as the necessary smp function call cannot be invoked from hard
interrupt context.

Signed-off-by: John Stultz <johnstul@us.ibm.com>
Reported-by: Jan Engelhardt <jengelh@inai.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Prarit Bhargava <prarit@redhat.com>
Link: http://lkml.kernel.org/r/1341960205-56738-3-git-send-email-johnstul@us.ibm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agohrtimer: Provide clock_was_set_delayed()
John Stultz [Tue, 17 Jul 2012 06:39:50 +0000]
hrtimer: Provide clock_was_set_delayed()

This is a backport of f55a6faa384304c89cfef162768e88374d3312cb

clock_was_set() cannot be called from hard interrupt context because
it calls on_each_cpu().

For fixing the widely reported leap seconds issue it is necessary to
call it from hard interrupt context, i.e. the timer tick code, which
does the timekeeping updates.

Provide a new function which denotes it in the hrtimer cpu base
structure of the cpu on which it is called and raise the hrtimer
softirq. We then execute the clock_was_set() notificiation from
softirq context in run_hrtimer_softirq(). The hrtimer softirq is
rarely used, so polling the flag there is not a performance issue.

[ tglx: Made it depend on CONFIG_HIGH_RES_TIMERS. We really should get
  rid of all this ifdeffery ASAP ]

Signed-off-by: John Stultz <johnstul@us.ibm.com>
Reported-by: Jan Engelhardt <jengelh@inai.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Prarit Bhargava <prarit@redhat.com>
Link: http://lkml.kernel.org/r/1341960205-56738-2-git-send-email-johnstul@us.ibm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agocfg80211: check iface combinations only when iface is running
Michal Kazior [Fri, 8 Jun 2012 08:55:44 +0000]
cfg80211: check iface combinations only when iface is running

commit f8cdddb8d61d16a156229f0910f7ecfc7a82c003 upstream.

Don't validate interface combinations on a stopped
interface. Otherwise we might end up being able to
create a new interface with a certain type, but
won't be able to change an existing interface
into that type.

This also skips some other functions when
interface is stopped and changing interface type.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
[Fixes regression introduced by cherry pick of 463454b5dbd8]
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

6 years agoclk: Check parent for NULL in clk_change_rate
Pawel Moll [Fri, 8 Jun 2012 13:04:06 +0000]
clk: Check parent for NULL in clk_change_rate

commit bf47b4fd8f9f81cd5ce40e1945c6334d088226d1 upstream.

clk_change_rate() is accessing parent's rate without checking
if the parent exists at all. In case of root clocks this will
cause NULL pointer dereference.

This patch follows what clk_calc_new_rates() does in such
situation.

Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoHID: add support for 2012 MacBook Pro Retina
Ryan Bourgeois [Tue, 10 Jul 2012 16:43:33 +0000]
HID: add support for 2012 MacBook Pro Retina

commit b2e6ad7dfe26aac5bf136962d0b11d180b820d44 upstream.

Add support for the 15'' MacBook Pro Retina. The keyboard is
the same as recent models.

The patch needs to be synchronized with the bcm5974 patch for
the trackpad - as usual.

Patch originally written by clipcarl (forums.opensuse.org).

[rydberg@euromail.se: Amended mouse ignore lines]
Signed-off-by: Ryan Bourgeois <bluedragonx@gmail.com>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoInput: xpad - add Andamiro Pump It Up pad
Yuri Khan [Thu, 12 Jul 2012 05:12:31 +0000]
Input: xpad - add Andamiro Pump It Up pad

commit e76b8ee25e034ab601b525abb95cea14aa167ed3 upstream.

I couldn't find the vendor ID in any of the online databases, but this
mat has a Pump It Up logo on the top side of the controller compartment,
and a disclaimer stating that Andamiro will not be liable on the bottom.

Signed-off-by: Yuri Khan <yurivkhan@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoInput: xpad - add signature for Razer Onza Tournament Edition
Ilia Katsnelson [Wed, 11 Jul 2012 07:54:20 +0000]
Input: xpad - add signature for Razer Onza Tournament Edition

commit cc71a7e899cc6b2ff41e1be48756782ed004d802 upstream.

Signed-off-by: Ilia Katsnelson <k0009000@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoInput: xpad - handle all variations of Mad Catz Beat Pad
Yuri Khan [Wed, 11 Jul 2012 07:49:18 +0000]
Input: xpad - handle all variations of Mad Catz Beat Pad

commit 3ffb62cb9ac2430c2504c6ff9727d0f2476ef0bd upstream.

The device should be handled by xpad driver instead of generic HID driver.

Signed-off-by: Yuri Khan <yurivkhan@gmail.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoInput: bcm5974 - Add support for 2012 MacBook Pro Retina
Henrik Rydberg [Tue, 10 Jul 2012 16:43:57 +0000]
Input: bcm5974 - Add support for 2012 MacBook Pro Retina

commit 3dde22a98e94eb18527f0ff0068fb2fb945e58d4 upstream.

Add support for the 15'' MacBook Pro Retina model (MacBookPro10,1).

Patch originally written by clipcarl (forums.opensuse.org).

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agobonding: Manage /proc/net/bonding/ entries from the netdev events
Eric W. Biederman [Mon, 9 Jul 2012 10:51:45 +0000]
bonding: Manage /proc/net/bonding/ entries from the netdev events

commit a64d49c3dd504b685f9742a2f3dcb11fb8e4345f upstream.

It was recently reported that moving a bonding device between network
namespaces causes warnings from /proc.  It turns out after the move we
were trying to add and to remove the /proc/net/bonding entries from the
wrong network namespace.

Move the bonding /proc registration code into the NETDEV_REGISTER and
NETDEV_UNREGISTER events where the proc registration and unregistration
will always happen at the right time.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agobonding: debugfs and network namespaces are incompatible
Eric W. Biederman [Mon, 9 Jul 2012 10:52:43 +0000]
bonding: debugfs and network namespaces are incompatible

commit 96ca7ffe748bf91f851e6aa4479aa11c8b1122ba upstream.

The bonding debugfs support has been broken in the presence of network
namespaces since it has been added.  The debugfs support does not handle
multiple bonding devices with the same name in different network
namespaces.

I haven't had any bug reports, and I'm not interested in getting any.
Disable the debugfs support when network namespaces are enabled.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agostmmac: Fix for nfs hang on multiple reboot
Deepak Sikri [Sun, 8 Jul 2012 21:14:45 +0000]
stmmac: Fix for nfs hang on multiple reboot

commit 8e83989106562326bfd6aaf92174fe138efd026b upstream.

It was observed that during multiple reboots nfs hangs. The status of
receive descriptors shows that all the descriptors were in control of
CPU, and none were assigned to DMA.
Also the DMA status register confirmed that the Rx buffer is
unavailable.

This patch adds the fix for the same by adding the memory barriers to
ascertain that the all instructions before enabling the Rx or Tx DMA are
completed which involves the proper setting of the ownership bit in DMA
descriptors.

Signed-off-by: Deepak Sikri <deepak.sikri@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agomac80211: destroy assoc_data correctly if assoc fails
Eliad Peller [Mon, 2 Jul 2012 11:42:03 +0000]
mac80211: destroy assoc_data correctly if assoc fails

commit 10a9109f2705fdc3caa94d768b2559587a9a050c upstream.

If association failed due to internal error (e.g. no
supported rates IE), we call ieee80211_destroy_assoc_data()
with assoc=true, while we actually reject the association.

This results in the BSSID not being zeroed out.

After passing assoc=false, we no longer have to call
sta_info_destroy_addr() explicitly. While on it, move
the "associated" message after the assoc_success check.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agorpmsg: fix dependency on initialization order
Federico Fuga [Mon, 16 Jul 2012 07:36:51 +0000]
rpmsg: fix dependency on initialization order

commit 9634252617441991b01dacaf4040866feecaf36f upstream.

When rpmsg drivers are built into the kernel, they must not initialize
before the rpmsg bus does, otherwise they'd trigger a BUG() in
drivers/base/driver.c line 169 (driver_register()).

To fix that, and to stop depending on arbitrary linkage ordering of
those built-in rpmsg drivers, we make the rpmsg bus initialize at
subsys_initcall.

Signed-off-by: Federico Fuga <fuga@studiofuga.com>
[ohad: rewrite the commit log]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoiwlegacy: don't mess up the SCD when removing a key
Emmanuel Grumbach [Wed, 4 Jul 2012 11:59:08 +0000]
iwlegacy: don't mess up the SCD when removing a key

commit b48d96652626b315229b1b82c6270eead6a77a6d upstream.

When we remove a key, we put a key index which was supposed
to tell the fw that we are actually removing the key. But
instead the fw took that index as a valid index and messed
up the SRAM of the device.

This memory corruption on the device mangled the data of
the SCD. The impact on the user is that SCD queue 2 got
stuck after having removed keys.

Reported-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoiwlegacy: always monitor for stuck queues
Stanislaw Gruszka [Wed, 4 Jul 2012 11:20:20 +0000]
iwlegacy: always monitor for stuck queues

commit c2ca7d92ed4bbd779516beb6eb226e19f7f7ab0f upstream.

This is iwlegacy version of:

commit 342bbf3fee2fa9a18147e74b2e3c4229a4564912
Author: Johannes Berg <johannes.berg@intel.com>
Date:   Sun Mar 4 08:50:46 2012 -0800

    iwlwifi: always monitor for stuck queues

    If we only monitor while associated, the following
    can happen:
     - we're associated, and the queue stuck check
       runs, setting the queue "touch" time to X
     - we disassociate, stopping the monitoring,
       which leaves the time set to X
     - almost 2s later, we associate, and enqueue
       a frame
     - before the frame is transmitted, we monitor
       for stuck queues, and find the time set to
       X, although it is now later than X + 2000ms,
       so we decide that the queue is stuck and
       erroneously restart the device

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoe1000e: Correct link check logic for 82571 serdes
Tushar Dave [Thu, 12 Jul 2012 08:56:56 +0000]
e1000e: Correct link check logic for 82571 serdes

commit d0efa8f23a644f7cb7d1f8e78dd9a223efa412a3 upstream.

SYNCH bit and IV bit of RXCW register are sticky. Before examining these bits,
RXCW should be read twice to filter out one-time false events and have correct
values for these bits. Incorrect values of these bits in link check logic can
cause weird link stability issues if auto-negotiation fails.

Reported-by: Dean Nelson <dnelson@redhat.com>
Signed-off-by: Tushar Dave <tushar.n.dave@intel.com>
Reviewed-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agort2x00usb: fix indexes ordering on RX queue kick
Stanislaw Gruszka [Wed, 4 Jul 2012 11:10:02 +0000]
rt2x00usb: fix indexes ordering on RX queue kick

commit efd821182cec8c92babef6e00a95066d3252fda4 upstream.

On rt2x00_dmastart() we increase index specified by Q_INDEX and on
rt2x00_dmadone() we increase index specified by Q_INDEX_DONE. So entries
between Q_INDEX_DONE and Q_INDEX are those we currently process in the
hardware. Entries between Q_INDEX and Q_INDEX_DONE are those we can
submit to the hardware.

According to that fix rt2x00usb_kick_queue(), as we need to submit RX
entries that are not processed by the hardware. It worked before only
for empty queue, otherwise was broken.

Note that for TX queues indexes ordering are ok. We need to kick entries
that have filled skb, but was not submitted to the hardware, i.e.
started from Q_INDEX_DONE and have ENTRY_DATA_PENDING bit set.

From practical standpoint this fixes RX queue stall, usually reproducible
in AP mode, like for example reported here:
https://bugzilla.redhat.com/show_bug.cgi?id=828824

Reported-and-tested-by: Franco Miceli <fmiceli@plan.ceibal.edu.uy>
Reported-and-tested-by: Tom Horsley <horsley1953@gmail.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agofifo: Do not restart open() if it already found a partner
Anders Kaseorg [Sun, 15 Jul 2012 21:14:25 +0000]
fifo: Do not restart open() if it already found a partner

commit 05d290d66be6ef77a0b962ebecf01911bd984a78 upstream.

If a parent and child process open the two ends of a fifo, and the
child immediately exits, the parent may receive a SIGCHLD before its
open() returns.  In that case, we need to make sure that open() will
return successfully after the SIGCHLD handler returns, instead of
throwing EINTR or being restarted.  Otherwise, the restarted open()
would incorrectly wait for a second partner on the other end.

The following test demonstrates the EINTR that was wrongly thrown from
the parent’s open().  Change .sa_flags = 0 to .sa_flags = SA_RESTART
to see a deadlock instead, in which the restarted open() waits for a
second reader that will never come.  (On my systems, this happens
pretty reliably within about 5 to 500 iterations.  Others report that
it manages to loop ~forever sometimes; YMMV.)

  #include <sys/stat.h>
  #include <sys/types.h>
  #include <sys/wait.h>
  #include <fcntl.h>
  #include <signal.h>
  #include <stdio.h>
  #include <stdlib.h>
  #include <unistd.h>

  #define CHECK(x) do if ((x) == -1) {perror(#x); abort();} while(0)

  void handler(int signum) {}

  int main()
  {
      struct sigaction act = {.sa_handler = handler, .sa_flags = 0};
      CHECK(sigaction(SIGCHLD, &act, NULL));
      CHECK(mknod("fifo", S_IFIFO | S_IRWXU, 0));
      for (;;) {
          int fd;
          pid_t pid;
          putc('.', stderr);
          CHECK(pid = fork());
          if (pid == 0) {
              CHECK(fd = open("fifo", O_RDONLY));
              _exit(0);
          }
          CHECK(fd = open("fifo", O_WRONLY));
          CHECK(close(fd));
          CHECK(waitpid(pid, NULL, 0));
      }
  }

This is what I suspect was causing the Git test suite to fail in
t9010-svn-fe.sh:

http://bugs.debian.org/678852

Signed-off-by: Anders Kaseorg <andersk@mit.edu>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agointel_ips: blacklist HP ProBook laptops
Takashi Iwai [Mon, 25 Jun 2012 13:07:17 +0000]
intel_ips: blacklist HP ProBook laptops

commit 88ca518b0bb4161e5f20f8a1d9cc477cae294e54 upstream.

intel_ips driver spews the warning message
  "ME failed to update for more than 1s, likely hung"
at each second endlessly on HP ProBook laptops with IronLake.

As this has never worked, better to blacklist the driver for now.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agosched/nohz: Rewrite and fix load-avg computation -- again
Peter Zijlstra [Fri, 22 Jun 2012 13:52:09 +0000]
sched/nohz: Rewrite and fix load-avg computation -- again

commit 5167e8d5417bf5c322a703d2927daec727ea40dd upstream.

Thanks to Charles Wang for spotting the defects in the current code:

 - If we go idle during the sample window -- after sampling, we get a
   negative bias because we can negate our own sample.

 - If we wake up during the sample window we get a positive bias
   because we push the sample to a known active period.

So rewrite the entire nohz load-avg muck once again, now adding
copious documentation to the code.

Reported-and-tested-by: Doug Smythies <dsmythies@telus.net>
Reported-and-tested-by: Charles Wang <muming.wq@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/1340373782.18025.74.camel@twins
[ minor edits ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agocpufreq / ACPI: Fix not loading acpi-cpufreq driver regression
Thomas Renninger [Thu, 12 Jul 2012 10:24:33 +0000]
cpufreq / ACPI: Fix not loading acpi-cpufreq driver regression

commit c4686c71a9183f76e3ef59098da5c098748672f6 upstream.

Commit d640113fe80e45ebd4a5b420b introduced a regression on SMP
systems where the processor core with ACPI id zero is disabled
(typically should be the case because of hyperthreading).
The regression got spread through stable kernels.
On 3.0.X it got introduced via 3.0.18.

Such platforms may be rare, but do exist.
Look out for a disabled processor with acpi_id 0 in dmesg:
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x10] disabled)

This problem has been observed on a:
HP Proliant BL280c G6 blade

This patch restricts the introduced workaround to platforms
with nr_cpu_ids <= 1.

Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoACPICA: Fix possible fault in return package object repair code
Bob Moore [Wed, 4 Jul 2012 02:02:32 +0000]
ACPICA: Fix possible fault in return package object repair code

commit 46befd6b38d802dfc5998e7d7938854578b45d9d upstream.

Fixes a problem that can occur when a lone package object is
wrapped with an outer package object in order to conform to
the ACPI specification. Can affect these predefined names:
_ALR,_MLS,_PSS,_TRT,_TSS,_PRT,_HPX,_DLM,_CSD,_PSD,_TSD

https://bugzilla.kernel.org/show_bug.cgi?id=44171

This problem was introduced in 3.4-rc1 by commit
6a99b1c94d053b3420eaa4a4bc8b2883dd90a2f9
(ACPICA: Object repair code: Support to add Package wrappers)

Reported-by: Vlastimil Babka <caster@gentoo.org>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoARM: SAMSUNG: fix race in s3c_adc_start for ADC
Todd Poynor [Fri, 13 Jul 2012 06:30:48 +0000]
ARM: SAMSUNG: fix race in s3c_adc_start for ADC

commit 8265981bb439f3ecc5356fb877a6c2a6636ac88a upstream.

Checking for adc->ts_pend already claimed should be done with the
lock held.

Signed-off-by: Todd Poynor <toddpoynor@google.com>
Acked-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agomd/raid1: fix use-after-free bug in RAID1 data-check code.
NeilBrown [Mon, 9 Jul 2012 01:34:13 +0000]
md/raid1: fix use-after-free bug in RAID1 data-check code.

commit 2d4f4f3384d4ef4f7c571448e803a1ce721113d5 upstream.

This bug has been present ever since data-check was introduce
in 2.6.16.  However it would only fire if a data-check were
done on a degraded array, which was only possible if the array
has 3 or more devices.  This is certainly possible, but is quite
uncommon.

Since hot-replace was added in 3.3 it can happen more often as
the same condition can arise if not all possible replacements are
present.

The problem is that as soon as we submit the last read request, the
'r1_bio' structure could be freed at any time, so we really should
stop looking at it.  If the last device is being read from we will
stop looking at it.  However if the last device is not due to be read
from, we will still check the bio pointer in the r1_bio, but the
r1_bio might already be free.

So use the read_targets counter to make sure we stop looking for bios
to submit as soon as we have submitted them all.

This fix is suitable for any -stable kernel since 2.6.16.

Reported-by: Arnold Schulz <arnysch@gmx.net>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agomtd: nandsim: don't open code a do_div helper
Herton Ronaldo Krzesinski [Wed, 16 May 2012 19:21:52 +0000]
mtd: nandsim: don't open code a do_div helper

commit 596fd46268634082314b3af1ded4612e1b7f3f03 upstream.

We don't need to open code the divide function, just use div_u64 that
already exists and do the same job. While this is a straightforward
clean up, there is more to that, the real motivation for this.

While building on a cross compiling environment in armel, using gcc
4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5), I was getting the following build
error:

ERROR: "__aeabi_uldivmod" [drivers/mtd/nand/nandsim.ko] undefined!

After investigating with objdump and hand built assembly version
generated with the compiler, I narrowed __aeabi_uldivmod as being
generated from the divide function. When nandsim.c is built with
-fno-inline-functions-called-once, that happens when
CONFIG_DEBUG_SECTION_MISMATCH is enabled, the do_div optimization in
arch/arm/include/asm/div64.h doesn't work as expected with the open
coded divide function: even if the do_div we are using doesn't have a
constant divisor, the compiler still includes the else parts of the
optimized do_div macro, and translates the divisions there to use
__aeabi_uldivmod, instead of only calling __do_div_asm -> __do_div64 and
optimizing/removing everything else out.

So to reproduce, gcc 4.6 plus CONFIG_DEBUG_SECTION_MISMATCH=y and
CONFIG_MTD_NAND_NANDSIM=m should do it, building on armel.

After this change, the compiler does the intended thing even with
-fno-inline-functions-called-once, and optimizes out as expected the
constant handling in the optimized do_div on arm. As this also avoids a
build issue, I'm marking for Stable, as I think is applicable for this
case.

Signed-off-by: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agomedia: dvb-core: Release semaphore on error path dvb_register_device()
Santosh Nayak [Sat, 23 Jun 2012 10:59:54 +0000]
media: dvb-core: Release semaphore on error path dvb_register_device()

commit 82163edcdfa4eb3d74516cc8e9f38dd3d039b67d upstream.

There is a missing "up_write()" here. Semaphore should be released
before returning error value.

Signed-off-by: Santosh Nayak <santoshprasadnayak@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoblock: fix infinite loop in __getblk_slow
Jeff Moyer [Thu, 12 Jul 2012 13:43:14 +0000]
block: fix infinite loop in __getblk_slow

commit 91f68c89d8f35fe98ea04159b9a3b42d0149478f upstream.

Commit 080399aaaf35 ("block: don't mark buffers beyond end of disk as
mapped") exposed a bug in __getblk_slow that causes mount to hang as it
loops infinitely waiting for a buffer that lies beyond the end of the
disk to become uptodate.

The problem was initially reported by Torsten Hilbrich here:

    https://lkml.org/lkml/2012/6/18/54

and also reported independently here:

    http://www.sysresccd.org/forums/viewtopic.php?f=13&t=4511

and then Richard W.M.  Jones and Marcos Mello noted a few separate
bugzillas also associated with the same issue.  This patch has been
confirmed to fix:

    https://bugzilla.redhat.com/show_bug.cgi?id=835019

The main problem is here, in __getblk_slow:

        for (;;) {
                struct buffer_head * bh;
                int ret;

                bh = __find_get_block(bdev, block, size);
                if (bh)
                        return bh;

                ret = grow_buffers(bdev, block, size);
                if (ret < 0)
                        return NULL;
                if (ret == 0)
                        free_more_memory();
        }

__find_get_block does not find the block, since it will not be marked as
mapped, and so grow_buffers is called to fill in the buffers for the
associated page.  I believe the for (;;) loop is there primarily to
retry in the case of memory pressure keeping grow_buffers from
succeeding.  However, we also continue to loop for other cases, like the
block lying beond the end of the disk.  So, the fix I came up with is to
only loop when grow_buffers fails due to memory allocation issues
(return value of 0).

The attached patch was tested by myself, Torsten, and Rich, and was
found to resolve the problem in call cases.

Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Reported-and-Tested-by: Torsten Hilbrich <torsten.hilbrich@secunet.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Josh Boyer <jwboyer@redhat.com>
[ Jens is on vacation, taking this directly  - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agohwmon: (it87) Preserve configuration register bits on init
Jean Delvare [Thu, 12 Jul 2012 20:47:37 +0000]
hwmon: (it87) Preserve configuration register bits on init

commit 41002f8dd5938d5ad1d008ce5bfdbfe47fa7b4e8 upstream.

We were accidentally losing one bit in the configuration register on
device initialization. It was reported to freeze one specific system
right away. Properly preserve all bits we don't explicitly want to
change in order to prevent that.

Reported-by: Stevie Trujillo <stevie.trujillo@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agomedia: cx231xx: don't DMA to random addresses
David Dillow [Mon, 18 Jun 2012 03:15:21 +0000]
media: cx231xx: don't DMA to random addresses

commit a7deca6fa79d5c65575532e780f3c93f6bf8ddad upstream.

Commit 7a6f6c29d264cdd2fe0eb3d923217eed5f0ad134 (cx231xx: use
URB_NO_TRANSFER_DMA_MAP) was intended to avoid mapping the DMA buffer
for URB twice. This works for the URBs allocated with usb_alloc_urb(),
as those are allocated from cohernent DMA pools, but the flag was also
added for the VBI and audio URBs, which have a manually allocated area.
This leaves the random trash in the structure after allocation as the
DMA address, corrupting memory and preventing VBI and audio from
working. Letting the USB core map the buffers solves the problem.

Signed-off-by: David Dillow <dave@thedillows.org>
Cc: Sri Deevi <srinivasa.deevi@conexant.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoRemove easily user-triggerable BUG from generic_setlease
Dave Jones [Fri, 13 Jul 2012 17:35:36 +0000]
Remove easily user-triggerable BUG from generic_setlease

commit 8d657eb3b43861064d36241e88d9d61c709f33f0 upstream.

This can be trivially triggered from userspace by passing in something unexpected.

    kernel BUG at fs/locks.c:1468!
    invalid opcode: 0000 [#1] SMP
    RIP: 0010:generic_setlease+0xc2/0x100
    Call Trace:
      __vfs_setlease+0x35/0x40
      fcntl_setlease+0x76/0x150
      sys_fcntl+0x1c6/0x810
      system_call_fastpath+0x1a/0x1f

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoLinux 3.4.5
Greg Kroah-Hartman [Mon, 16 Jul 2012 18:20:09 +0000]
Linux 3.4.5

6 years agoocfs2: fix NULL pointer dereference in __ocfs2_change_file_space()
Luis Henriques [Wed, 11 Jul 2012 21:02:10 +0000]
ocfs2: fix NULL pointer dereference in __ocfs2_change_file_space()

commit a4e08d001f2e50bb8b3c4eebadcf08e5535f02ee upstream.

As ocfs2_fallocate() will invoke __ocfs2_change_file_space() with a NULL
as the first parameter (file), it may trigger a NULL pointer dereferrence
due to a missing check.

Addresses http://bugs.launchpad.net/bugs/1006012

Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
Reported-by: Bret Towe <magnade@gmail.com>
Tested-by: Bret Towe <magnade@gmail.com>
Cc: Sunil Mushran <sunil.mushran@oracle.com>
Acked-by: Joel Becker <jlbec@evilplan.org>
Acked-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agomemblock: free allocated memblock_reserved_regions later
Yinghai Lu [Wed, 11 Jul 2012 21:02:56 +0000]
memblock: free allocated memblock_reserved_regions later

commit 29f6738609e40227dabcc63bfb3b84b3726a75bd upstream.

memblock_free_reserved_regions() calls memblock_free(), but
memblock_free() would double reserved.regions too, so we could free the
old range for reserved.regions.

Also tj said there is another bug which could be related to this.

| I don't think we're saving any noticeable
| amount by doing this "free - give it to page allocator - reserve
| again" dancing.  We should just allocate regions aligned to page
| boundaries and free them later when memblock is no longer in use.

in that case, when DEBUG_PAGEALLOC, will get panic:

     memblock_free: [0x0000102febc080-0x0000102febf080] memblock_free_reserved_regions+0x37/0x39
  BUG: unable to handle kernel paging request at ffff88102febd948
  IP: [<ffffffff836a5774>] __next_free_mem_range+0x9b/0x155
  PGD 4826063 PUD cf67a067 PMD cf7fa067 PTE 800000102febd160
  Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
  CPU 0
  Pid: 0, comm: swapper Not tainted 3.5.0-rc2-next-20120614-sasha #447
  RIP: 0010:[<ffffffff836a5774>]  [<ffffffff836a5774>] __next_free_mem_range+0x9b/0x155

See the discussion at https://lkml.org/lkml/2012/6/13/469

So try to allocate with PAGE_SIZE alignment and free it later.

Reported-by: Sasha Levin <levinsasha928@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agofs: ramfs: file-nommu: add SetPageUptodate()
Bob Liu [Wed, 11 Jul 2012 21:02:35 +0000]
fs: ramfs: file-nommu: add SetPageUptodate()

commit fea9f718b3d68147f162ed2d870183ce5e0ad8d8 upstream.

There is a bug in the below scenario for !CONFIG_MMU:

 1. create a new file
 2. mmap the file and write to it
 3. read the file can't get the correct value

Because

  sys_read() -> generic_file_aio_read() -> simple_readpage() -> clear_page()

which causes the page to be zeroed.

Add SetPageUptodate() to ramfs_nommu_expand_for_mapping() so that
generic_file_aio_read() do not call simple_readpage().

Signed-off-by: Bob Liu <lliubbo@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agomm, thp: abort compaction if migration page cannot be charged to memcg
David Rientjes [Wed, 11 Jul 2012 21:02:13 +0000]
mm, thp: abort compaction if migration page cannot be charged to memcg

commit 4bf2bba3750f10aa9e62e6949bc7e8329990f01b upstream.

If page migration cannot charge the temporary page to the memcg,
migrate_pages() will return -ENOMEM.  This isn't considered in memory
compaction however, and the loop continues to iterate over all
pageblocks trying to isolate and migrate pages.  If a small number of
very large memcgs happen to be oom, however, these attempts will mostly
be futile leading to an enormous amout of cpu consumption due to the
page migration failures.

This patch will short circuit and fail memory compaction if
migrate_pages() returns -ENOMEM.  COMPACT_PARTIAL is returned in case
some migrations were successful so that the page allocator will retry.

Signed-off-by: David Rientjes <rientjes@google.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agodrivers/rtc/rtc-mxc.c: fix irq enabled interrupts warning
Benoît Thébaudeau [Wed, 11 Jul 2012 21:02:32 +0000]
drivers/rtc/rtc-mxc.c: fix irq enabled interrupts warning

commit b59f6d1febd6cbe9fae4589bf72da0ed32bc69e0 upstream.

Fixes

  WARNING: at irq/handle.c:146 handle_irq_event_percpu+0x19c/0x1b8()
  irq 25 handler mxc_rtc_interrupt+0x0/0xac enabled interrupts
  Modules linked in:
   (unwind_backtrace+0x0/0xf0) from (warn_slowpath_common+0x4c/0x64)
   (warn_slowpath_common+0x4c/0x64) from (warn_slowpath_fmt+0x30/0x40)
   (warn_slowpath_fmt+0x30/0x40) from (handle_irq_event_percpu+0x19c/0x1b8)
   (handle_irq_event_percpu+0x19c/0x1b8) from (handle_irq_event+0x28/0x38)
   (handle_irq_event+0x28/0x38) from (handle_level_irq+0x80/0xc4)
   (handle_level_irq+0x80/0xc4) from (generic_handle_irq+0x24/0x38)
   (generic_handle_irq+0x24/0x38) from (handle_IRQ+0x30/0x84)
   (handle_IRQ+0x30/0x84) from (avic_handle_irq+0x2c/0x4c)
   (avic_handle_irq+0x2c/0x4c) from (__irq_svc+0x40/0x60)
  Exception stack(0xc050bf60 to 0xc050bfa8)
  bf60: 00000001 00000000 003c4208 c0018e20 c050a000 c050a000 c054a4c8 c050a000
  bf80: c05157a8 4117b363 80503bb4 00000000 01000000 c050bfa8 c0018e2c c000e808
  bfa0: 60000013 ffffffff
   (__irq_svc+0x40/0x60) from (default_idle+0x1c/0x30)
   (default_idle+0x1c/0x30) from (cpu_idle+0x68/0xa8)
   (cpu_idle+0x68/0xa8) from (start_kernel+0x22c/0x26c)

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Sascha Hauer <kernel@pengutronix.de>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agodrivers/rtc/rtc-ab8500.c: use IRQF_ONESHOT when requesting a threaded IRQ
Lee Jones [Wed, 11 Jul 2012 21:02:16 +0000]
drivers/rtc/rtc-ab8500.c: use IRQF_ONESHOT when requesting a threaded IRQ

commit 3cfd16a551dc0c188160e1765168a04baf2d3198 upstream.

This driver's IRQ registration is failing because the kernel now forces
IRQs to be ONESHOT if no IRQ handler is passed.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agodrivers/rtc/rtc-spear.c: fix use-after-free in spear_rtc_remove()
Devendra Naga [Wed, 11 Jul 2012 21:01:53 +0000]
drivers/rtc/rtc-spear.c: fix use-after-free in spear_rtc_remove()

commit 2a643893e50fde71d7ba84b5592ec61b467b9ab6 upstream.

`config' is freed and is then used in the rtc_device_unregister() call,
causing a kernel panic.

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Reviewed-by: Viresh Kumar <viresh.linux@gmail.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agomemory hotplug: fix invalid memory access caused by stale kswapd pointer
Jiang Liu [Wed, 11 Jul 2012 21:01:52 +0000]
memory hotplug: fix invalid memory access caused by stale kswapd pointer

commit d8adde17e5f858427504725218c56aef90e90fc7 upstream.

kswapd_stop() is called to destroy the kswapd work thread when all memory
of a NUMA node has been offlined.  But kswapd_stop() only terminates the
work thread without resetting NODE_DATA(nid)->kswapd to NULL.  The stale
pointer will prevent kswapd_run() from creating a new work thread when
adding memory to the memory-less NUMA node again.  Eventually the stale
pointer may cause invalid memory access.

An example stack dump as below. It's reproduced with 2.6.32, but latest
kernel has the same issue.

  BUG: unable to handle kernel NULL pointer dereference at (null)
  IP: [<ffffffff81051a94>] exit_creds+0x12/0x78
  PGD 0
  Oops: 0000 [#1] SMP
  last sysfs file: /sys/devices/system/memory/memory391/state
  CPU 11
  Modules linked in: cpufreq_conservative cpufreq_userspace cpufreq_powersave acpi_cpufreq microcode fuse loop dm_mod tpm_tis rtc_cmos i2c_i801 rtc_core tpm serio_raw pcspkr sg tpm_bios igb i2c_core iTCO_wdt rtc_lib mptctl iTCO_vendor_support button dca bnx2 usbhid hid uhci_hcd ehci_hcd usbcore sd_mod crc_t10dif edd ext3 mbcache jbd fan ide_pci_generic ide_core ata_generic ata_piix libata thermal processor thermal_sys hwmon mptsas mptscsih mptbase scsi_transport_sas scsi_mod
  Pid: 7949, comm: sh Not tainted 2.6.32.12-qiuxishi-5-default #92 Tecal RH2285
  RIP: 0010:exit_creds+0x12/0x78
  RSP: 0018:ffff8806044f1d78  EFLAGS: 00010202
  RAX: 0000000000000000 RBX: ffff880604f22140 RCX: 0000000000019502
  RDX: 0000000000000000 RSI: 0000000000000202 RDI: 0000000000000000
  RBP: ffff880604f22150 R08: 0000000000000000 R09: ffffffff81a4dc10
  R10: 00000000000032a0 R11: ffff880006202500 R12: 0000000000000000
  R13: 0000000000c40000 R14: 0000000000008000 R15: 0000000000000001
  FS:  00007fbc03d066f0(0000) GS:ffff8800282e0000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
  CR2: 0000000000000000 CR3: 000000060f029000 CR4: 00000000000006e0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
  Process sh (pid: 7949, threadinfo ffff8806044f0000, task ffff880603d7c600)
  Stack:
   ffff880604f22140 ffffffff8103aac5 ffff880604f22140 ffffffff8104d21e
   ffff880006202500 0000000000008000 0000000000c38000 ffffffff810bd5b1
   0000000000000000 ffff880603d7c600 00000000ffffdd29 0000000000000003
  Call Trace:
    __put_task_struct+0x5d/0x97
    kthread_stop+0x50/0x58
    offline_pages+0x324/0x3da
    memory_block_change_state+0x179/0x1db
    store_mem_state+0x9e/0xbb
    sysfs_write_file+0xd0/0x107
    vfs_write+0xad/0x169
    sys_write+0x45/0x6e
    system_call_fastpath+0x16/0x1b
  Code: ff 4d 00 0f 94 c0 84 c0 74 08 48 89 ef e8 1f fd ff ff 5b 5d 31 c0 41 5c c3 53 48 8b 87 20 06 00 00 48 89 fb 48 8b bf 18 06 00 00 <8b> 00 48 c7 83 18 06 00 00 00 00 00 00 f0 ff 0f 0f 94 c0 84 c0
  RIP  exit_creds+0x12/0x78
   RSP <ffff8806044f1d78>
  CR2: 0000000000000000

[akpm@linux-foundation.org: add pglist_data.kswapd locking comments]
Signed-off-by: Xishi Qiu <qiuxishi@huawei.com>
Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: David Rientjes <rientjes@google.com>
Reviewed-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agostaging:iio:ad7606: Re-add missing scale attribute
Lars-Peter Clausen [Tue, 5 Jun 2012 16:16:31 +0000]
staging:iio:ad7606: Re-add missing scale attribute

commit 279bf2e57c30c9a4482b2b6ede11b31c41e35e78 upstream.

Commit 50ac23be ("staging:iio:adc:ad7606 add local define for chan_spec
structures.") accidentally removed the scale info_mask flag. This patch
adds it back again.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[herton: Backported to 3.4: info_mask was not used yet with another flag]
Signed-off-by: Herton R. Krzesinski <herton@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agomd/raid5: Do not add data_offset before call to is_badblock
majianpeng [Tue, 12 Jun 2012 00:31:10 +0000]
md/raid5: Do not add data_offset before call to is_badblock

commit 6c0544e255dd6582a9899572e120fb55d9f672a4 upstream.

In chunk_aligned_read() we are adding data_offset before calling
is_badblock.  But is_badblock also adds data_offset, so that is bad.

So move the addition of data_offset to after the call to
is_badblock.

This bug was introduced by commit 31c176ecdf3563140e639
     md/raid5: avoid reading from known bad blocks.
which first appeared in 3.0.  So that patch is suitable for any
-stable kernel from 3.0.y onwards.  However it will need minor
revision for most of those (as the comment didn't appear until
recently).

Signed-off-by: majianpeng <majianpeng@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
[bwh: Backported to 3.2: ignored missing comment]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agomm: Hold a file reference in madvise_remove
Andy Lutomirski [Thu, 5 Jul 2012 23:00:11 +0000]
mm: Hold a file reference in madvise_remove

commit 9ab4233dd08036fe34a89c7dc6f47a8bf2eb29eb upstream.

Otherwise the code races with munmap (causing a use-after-free
of the vma) or with close (causing a use-after-free of the struct
file).

The bug was introduced by commit 90ed52ebe481 ("[PATCH] holepunch: fix
mmap_sem i_mutex deadlock")

Cc: Hugh Dickins <hugh@veritas.com>
Cc: Miklos Szeredi <mszeredi@suse.cz>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[bwh: Backported to 3.2:
 - Adjust context
 - madvise_remove() calls vmtruncate_range(), not do_fallocate()]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agodrm/i915: rip out the PM_IIR WARN
Daniel Vetter [Thu, 21 Jun 2012 12:55:22 +0000]
drm/i915: rip out the PM_IIR WARN

commit 58bf8062d0b293b8e1028e5b0342082002886bd4 upstream.

After banging my head against this for the past few months, I still
don't see how this could possible race under the premise that once an
irq bit is masked in PM_IMR and reset in PM_IIR it won't show up again
until we unmask it in PM_IMR.

Still, we have reports of this being seen in the wild. Now Bspec has
this little bit of lovely language in the PMIIR register:

Public SNB Docs, Vol3Part2, 2.5.14 "PMIIR":

"For each bit, the IIR can store a second pending interrupt if two or
more of the same interrupt conditions occur before the first condition
is cleared. Upon clearing the interrupt, the IIR bit will momentarily
go low, then return high to indicate there is another interrupt
pending."

Now if we presume that PMIMR only prevent new interrupts from being
queued, we could easily end up masking an interrupt and clearing it,
but the 2nd pending interrupt setting the bit in PMIIR right away
again. Which leads, the next time the irq handler runs, to hitting the
WARN.

Also, no bad side effects of this have ever been reported. And we've
tracked down our issues with the gpu turbo getting stuck to bogus
interrupt generation limits in th RPLIMIT register.

So let's just rip out this WARN as bogus and call it a day. The only
shallow thing here is that this 2-deep irq queue in the hw makes you
wonder how racy the windows irq handler is ...

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42907
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agodrm/i915: Refactor the deferred PM_IIR handling into a single function
Chris Wilson [Sun, 15 Apr 2012 10:56:03 +0000]
drm/i915: Refactor the deferred PM_IIR handling into a single function

commit fc6826d1dcd65f3d1e9a5377678882e4e08f02be upstream.

This function, along with the registers and deferred work hander, are
all shared with SandyBridge, IvyBridge and their variants. So remove the
duplicate code into a single function.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[bwh: Backported to 3.2: adjust context; drop changes for Valley View]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agosplice: fix racy pipe->buffers uses
Eric Dumazet [Tue, 12 Jun 2012 13:24:40 +0000]
splice: fix racy pipe->buffers uses

commit 047fe3605235888f3ebcda0c728cb31937eadfe6 upstream.

Dave Jones reported a kernel BUG at mm/slub.c:3474! triggered
by splice_shrink_spd() called from vmsplice_to_pipe()

commit 35f3d14dbbc5 (pipe: add support for shrinking and growing pipes)
added capability to adjust pipe->buffers.

Problem is some paths don't hold pipe mutex and assume pipe->buffers
doesn't change for their duration.

Fix this by adding nr_pages_max field in struct splice_pipe_desc, and
use it in place of pipe->buffers where appropriate.

splice_shrink_spd() loses its struct pipe_inode_info argument.

Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Tom Herbert <therbert@google.com>
Tested-by: Dave Jones <davej@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
[bwh: Backported to 3.2:
 - Adjust context in vmsplice_to_pipe()
 - Update one more call to splice_shrink_spd(), from skb_splice_bits()]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agonet/wireless: ipw2x00: add supported cipher suites to wiphy initialization
Stanislav Yakovlev [Wed, 11 Apr 2012 01:44:47 +0000]
net/wireless: ipw2x00: add supported cipher suites to wiphy initialization

commit a141e6a0097118bb35024485f1faffc0d9042f5c upstream.

Driver doesn't report its supported cipher suites through cfg80211
interface. It still uses wext interface and probably will not work
through nl80211, but will at least correctly advertise supported
features.

Bug was reported by Omar Siam.
https://bugzilla.kernel.org/show_bug.cgi?id=43049

Signed-off-by: Stanislav Yakovlev <stas.yakovlev@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Cc: Josh Boyer <jwboyer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agomacvtap: zerocopy: validate vectors before building skb
Jason Wang [Wed, 2 May 2012 03:42:15 +0000]
macvtap: zerocopy: validate vectors before building skb

commit b92946e2919134ebe2a4083e4302236295ea2a73 upstream.

There're several reasons that the vectors need to be validated:

- Return error when caller provides vectors whose num is greater than UIO_MAXIOV.
- Linearize part of skb when userspace provides vectors grater than MAX_SKB_FRAGS.
- Return error when userspace provides vectors whose total length may exceed
- MAX_SKB_FRAGS * PAGE_SIZE.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Josh Boyer <jwboyer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agortl8187: ->brightness_set can not sleep
Stanislaw Gruszka [Wed, 16 May 2012 09:06:21 +0000]
rtl8187: ->brightness_set can not sleep

commit 0fde0a8cfd0ede7f310d6a681c8e5a7cb3e32406 upstream.

Fix:

BUG: sleeping function called from invalid context at kernel/workqueue.c:2547
in_atomic(): 1, irqs_disabled(): 0, pid: 629, name: wpa_supplicant
2 locks held by wpa_supplicant/629:
 #0:  (rtnl_mutex){+.+.+.}, at: [<c08b2b84>] rtnl_lock+0x14/0x20
 #1:  (&trigger->leddev_list_lock){.+.?..}, at: [<c0867f41>] led_trigger_event+0x21/0x80
Pid: 629, comm: wpa_supplicant Not tainted 3.3.0-0.rc3.git5.1.fc17.i686
Call Trace:
 [<c046a9f6>] __might_sleep+0x126/0x1d0
 [<c0457d6c>] wait_on_work+0x2c/0x1d0
 [<c045a09a>] __cancel_work_timer+0x6a/0x120
 [<c045a160>] cancel_delayed_work_sync+0x10/0x20
 [<f7dd3c22>] rtl8187_led_brightness_set+0x82/0xf0 [rtl8187]
 [<c0867f7c>] led_trigger_event+0x5c/0x80
 [<f7ff5e6d>] ieee80211_led_radio+0x1d/0x40 [mac80211]
 [<f7ff3583>] ieee80211_stop_device+0x13/0x230 [mac80211]

Removing _sync is ok, because if led_on work is currently running
it will be finished before led_off work start to perform, since
they are always queued on the same mac80211 local->workqueue.

Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=795176

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Acked-by: Hin-Tak Leung <htl10@users.sourceforge.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Cc: Josh Boyer <jwboyer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agothp: avoid atomic64_read in pmd_read_atomic for 32bit PAE
Andrea Arcangeli [Wed, 20 Jun 2012 19:52:57 +0000]
thp: avoid atomic64_read in pmd_read_atomic for 32bit PAE

commit e4eed03fd06578571c01d4f1478c874bb432c815 upstream.

In the x86 32bit PAE CONFIG_TRANSPARENT_HUGEPAGE=y case while holding the
mmap_sem for reading, cmpxchg8b cannot be used to read pmd contents under
Xen.

So instead of dealing only with "consistent" pmdvals in
pmd_none_or_trans_huge_or_clear_bad() (which would be conceptually
simpler) we let pmd_none_or_trans_huge_or_clear_bad() deal with pmdvals
where the low 32bit and high 32bit could be inconsistent (to avoid having
to use cmpxchg8b).

The only guarantee we get from pmd_read_atomic is that if the low part of
the pmd was found null, the high part will be null too (so the pmd will be
considered unstable).  And if the low part of the pmd is found "stable"
later, then it means the whole pmd was read atomically (because after a
pmd is stable, neither MADV_DONTNEED nor page faults can alter it anymore,
and we read the high part after the low part).

In the 32bit PAE x86 case, it is enough to read the low part of the pmdval
atomically to declare the pmd as "stable" and that's true for THP and no
THP, furthermore in the THP case we also have a barrier() that will
prevent any inconsistent pmdvals to be cached by a later re-read of the
*pmd.

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Jonathan Nieder <jrnieder@gmail.com>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Larry Woodman <lwoodman@redhat.com>
Cc: Petr Matousek <pmatouse@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Jan Beulich <jbeulich@suse.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Tested-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agomm: pmd_read_atomic: fix 32bit PAE pmd walk vs pmd_populate SMP race condition
Andrea Arcangeli [Tue, 29 May 2012 22:06:49 +0000]
mm: pmd_read_atomic: fix 32bit PAE pmd walk vs pmd_populate SMP race condition

commit 26c191788f18129af0eb32a358cdaea0c7479626 upstream.

When holding the mmap_sem for reading, pmd_offset_map_lock should only
run on a pmd_t that has been read atomically from the pmdp pointer,
otherwise we may read only half of it leading to this crash.

PID: 11679  TASK: f06e8000  CPU: 3   COMMAND: "do_race_2_panic"
 #0 [f06a9dd8] crash_kexec at c049b5ec
 #1 [f06a9e2c] oops_end at c083d1c2
 #2 [f06a9e40] no_context at c0433ded
 #3 [f06a9e64] bad_area_nosemaphore at c043401a
 #4 [f06a9e6c] __do_page_fault at c0434493
 #5 [f06a9eec] do_page_fault at c083eb45
 #6 [f06a9f04] error_code (via page_fault) at c083c5d5
    EAX: 01fb470c EBX: fff35000 ECX: 00000003 EDX: 00000100 EBP:
    00000000
    DS:  007b     ESI: 9e201000 ES:  007b     EDI: 01fb4700 GS:  00e0
    CS:  0060     EIP: c083bc14 ERR: ffffffff EFLAGS: 00010246
 #7 [f06a9f38] _spin_lock at c083bc14
 #8 [f06a9f44] sys_mincore at c0507b7d
 #9 [f06a9fb0] system_call at c083becd
                         start           len
    EAX: ffffffda  EBX: 9e200000  ECX: 00001000  EDX: 6228537f
    DS:  007b      ESI: 00000000  ES:  007b      EDI: 003d0f00
    SS:  007b      ESP: 62285354  EBP: 62285388  GS:  0033
    CS:  0073      EIP: 00291416  ERR: 000000da  EFLAGS: 00000286

This should be a longstanding bug affecting x86 32bit PAE without THP.
Only archs with 64bit large pmd_t and 32bit unsigned long should be
affected.

With THP enabled the barrier() in pmd_none_or_trans_huge_or_clear_bad()
would partly hide the bug when the pmd transition from none to stable,
by forcing a re-read of the *pmd in pmd_offset_map_lock, but when THP is
enabled a new set of problem arises by the fact could then transition
freely in any of the none, pmd_trans_huge or pmd_trans_stable states.
So making the barrier in pmd_none_or_trans_huge_or_clear_bad()
unconditional isn't good idea and it would be a flakey solution.

This should be fully fixed by introducing a pmd_read_atomic that reads
the pmd in order with THP disabled, or by reading the pmd atomically
with cmpxchg8b with THP enabled.

Luckily this new race condition only triggers in the places that must
already be covered by pmd_none_or_trans_huge_or_clear_bad() so the fix
is localized there but this bug is not related to THP.

NOTE: this can trigger on x86 32bit systems with PAE enabled with more
than 4G of ram, otherwise the high part of the pmd will never risk to be
truncated because it would be zero at all times, in turn so hiding the
SMP race.

This bug was discovered and fully debugged by Ulrich, quote:

----
[..]
pmd_none_or_trans_huge_or_clear_bad() loads the content of edx and
eax.

    496 static inline int pmd_none_or_trans_huge_or_clear_bad(pmd_t
    *pmd)
    497 {
    498         /* depend on compiler for an atomic pmd read */
    499         pmd_t pmdval = *pmd;

                                // edi = pmd pointer
0xc0507a74 <sys_mincore+548>:   mov    0x8(%esp),%edi
...
                                // edx = PTE page table high address
0xc0507a84 <sys_mincore+564>:   mov    0x4(%edi),%edx
...
                                // eax = PTE page table low address
0xc0507a8e <sys_mincore+574>:   mov    (%edi),%eax

[..]

Please note that the PMD is not read atomically. These are two "mov"
instructions where the high order bits of the PMD entry are fetched
first. Hence, the above machine code is prone to the following race.

-  The PMD entry {high|low} is 0x0000000000000000.
   The "mov" at 0xc0507a84 loads 0x00000000 into edx.

-  A page fault (on another CPU) sneaks in between the two "mov"
   instructions and instantiates the PMD.

-  The PMD entry {high|low} is now 0x00000003fda38067.
   The "mov" at 0xc0507a8e loads 0xfda38067 into eax.
----

Reported-by: Ulrich Obergfell <uobergfe@redhat.com>
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Larry Woodman <lwoodman@redhat.com>
Cc: Petr Matousek <pmatouse@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoath9k: fix panic caused by returning a descriptor we have queued for reuse
Tom Hughes [Wed, 27 Jun 2012 17:21:15 +0000]
ath9k: fix panic caused by returning a descriptor we have queued for reuse

commit 6bb51c70cabaadddc54a6454844eceba91a56083 upstream.

Commit 3a2923e83c introduced a bug when a corrupt descriptor
is encountered - although the following descriptor is discarded
and returned to the queue for reuse the associated frame is
also returned for processing. This leads to a panic:

BUG: unable to handle kernel NULL pointer dereference at 000000000000003a
IP: [<ffffffffa02599a5>] ath_rx_tasklet+0x165/0x1b00 [ath9k]
Call Trace:
<IRQ>
[<ffffffff812d7fa0>] ? map_single+0x60/0x60
[<ffffffffa028f044>] ? ath9k_ioread32+0x34/0x90 [ath9k]
[<ffffffffa0292eec>] athk9k_tasklet+0xdc/0x160 [ath9k]
[<ffffffff8105e133>] tasklet_action+0x63/0xd0
[<ffffffff8105dbc0>] __do_softirq+0xc0/0x1e0
[<ffffffff8101a873>] ? native_sched_clock+0x13/0x80
[<ffffffff815f9d5c>] call_softirq+0x1c/0x30
[<ffffffff810151f5>] do_softirq+0x75/0xb0
[<ffffffff8105df95>] irq_exit+0xb5/0xc0
[<ffffffff815fa5b3>] do_IRQ+0x63/0xe0
[<ffffffff815f0cea>] common_interrupt+0x6a/0x6a
<EOI>
[<ffffffff8131840a>] ? intel_idle+0xea/0x150
[<ffffffff813183eb>] ? intel_idle+0xcb/0x150
[<ffffffff814a1db9>] cpuidle_enter+0x19/0x20
[<ffffffff814a23d9>] cpuidle_idle_call+0xa9/0x240
[<ffffffff8101c4bf>] cpu_idle+0xaf/0x120
[<ffffffff815cda8e>] rest_init+0x72/0x74
[<ffffffff81cf4c1a>] start_kernel+0x3b7/0x3c4
[<ffffffff81cf4662>] ? repair_env_string+0x5e/0x5e
[<ffffffff81cf4346>] x86_64_start_reservations+0x131/0x135
[<ffffffff81cf444a>] x86_64_start_kernel+0x100/0x10f

Making sure bf is cleared to NULL in this case restores the
old behaviour.

Signed-off-by: Tom Hughes <tom@compton.nu>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Cc: Josh Boyer <jwboyer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agotg3: Apply short DMA frag workaround to 5906
Matt Carlson [Thu, 7 Jun 2012 12:56:54 +0000]
tg3: Apply short DMA frag workaround to 5906

commit b7abee6ef888117f92db370620ebf116a38e3f4d upstream.

5906 devices also need the short DMA fragment workaround.  This patch
makes the necessary change.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Tested-by: Christian Kujau <lists@nerdbynature.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Josh Boyer <jwboyer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoraid5: delayed stripe fix
Shaohua Li [Tue, 3 Jul 2012 05:57:19 +0000]
raid5: delayed stripe fix

commit fab363b5ff502d1b39ddcfec04271f5858d9f26e upstream.

There isn't locking setting STRIPE_DELAYED and STRIPE_PREREAD_ACTIVE bits, but
the two bits have relationship. A delayed stripe can be moved to hold list only
when preread active stripe count is below IO_THRESHOLD. If a stripe has both
the bits set, such stripe will be in delayed list and preread count not 0,
which will make such stripe never leave delayed list.

Signed-off-by: Shaohua Li <shli@fusionio.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agogspca-core: Fix buffers staying in queued state after a stream_off
Hans de Goede [Thu, 5 Jul 2012 08:23:17 +0000]
gspca-core: Fix buffers staying in queued state after a stream_off

commit af05ef01e9cde84620c6855a8d8ab9c8a1db9009 upstream.

[Backport to linux-stable by Antonio Ospite <ospite@studenti.unina.it>]

This fixes a regression introduced by commit f7059ea and should be
backported to all supported stable kernels which have this commit.

Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agomwifiex: fix wrong return values in add_virtual_intf() error cases
Bing Zhao [Wed, 4 Jul 2012 03:43:56 +0000]
mwifiex: fix wrong return values in add_virtual_intf() error cases

commit 858faa57dd9e2b91f3f870fbb1185982e42f5a2b upstream

add_virtual_intf() needs to return an ERR_PTR(), instead of NULL,
on errors, otherwise cfg80211 will crash.

Reported-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agotracing: change CPU ring buffer state from tracing_cpumask
Vaibhav Nagarnaik [Fri, 4 May 2012 01:59:52 +0000]
tracing: change CPU ring buffer state from tracing_cpumask

commit 71babb2705e2203a64c27ede13ae3508a0d2c16c upstream.

According to Documentation/trace/ftrace.txt:

tracing_cpumask:

        This is a mask that lets the user only trace
        on specified CPUS. The format is a hex string
        representing the CPUS.

The tracing_cpumask currently doesn't affect the tracing state of
per-CPU ring buffers.

This patch enables/disables CPU recording as its corresponding bit in
tracing_cpumask is set/unset.

Link: http://lkml.kernel.org/r/1336096792-25373-3-git-send-email-vnagarnaik@google.com

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Laurent Chavey <chavey@google.com>
Cc: Justin Teravest <teravest@google.com>
Cc: David Sharp <dhsharp@google.com>
Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoiwlwifi: remove log_event debugfs file debugging is disabled
Johannes Berg [Wed, 20 Jun 2012 06:46:25 +0000]
iwlwifi: remove log_event debugfs file debugging is disabled

commit 882b7b7d11d65e8eccce738f1ce97cdfdb998f9f upstream.

When debugging is disabled, the event log functions aren't
functional in the way that the debugfs file expects. This
leads to the debugfs access crashing. Since the event log
functions aren't functional then, remove the debugfs file
when CONFIG_IWLWIFI_DEBUG is not set.

Reported-by: Lekensteyn <lekensteyn@gmail.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
[bwh: Backported to 3.2: adjust filename, context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agomac80211: fix queues stuck issue with HT bandwidth change
Johannes Berg [Wed, 27 Jun 2012 16:11:56 +0000]
mac80211: fix queues stuck issue with HT bandwidth change

No upstream commit, the buggy code was removed in 3.5 in commit
7213cf2cb0dfbb4d6b55a1da000d34338f76c0e3 and others.

Rajkumar changed code for handling channel switching in
mac80211 to stop the queues in

  commit 7cc44ed48d0ec0937c1f098642540b6c9ca38de5
  Author: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
  Date:   Fri Sep 16 15:32:34 2011 +0530

      mac80211: Fix regression on queue stop during 2040 bss change

which went into 3.2. In the 3.4 cycle, Paul's change

  commit 3117bbdb7899d43927c8ce4fe885ab7c1231c121
  Author: Paul Stewart <pstew@chromium.org>
  Date:   Tue Mar 13 07:46:18 2012 -0700

      mac80211: Don't let regulatory make us deaf

went in and changed the TX/RX enable logic, but now
the conditions for stopping and restarting the queues
were different so that now, if the AP changes between
20/40 MHz bandwidth, it can happen that we stop but
never restart the queues. This breaks the connection
and the module actually has to be reloaded to get it
back to work.

Fix this by making sure the queues are always started
when they were stopped.

Reported-by: Florian Manschwetus <manschwetus@googlemail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoNFS: hard-code init_net for NFS callback transports
Stanislav Kinsbursky [Mon, 25 Jun 2012 20:40:10 +0000]
NFS: hard-code init_net for NFS callback transports

upstream commit 12918b10d59e975fd5241eef03ef9e6d5ea3dcfe.

In case of destroying mount namespace on child reaper exit, nsproxy is zeroed
to the point already. So, dereferencing of it is invalid.
This patch hard-code "init_net" for all network namespace references for NFS
callback services. This will be fixed with proper NFS callback
containerization.

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoSUNRPC: move per-net operations from svc_destroy()
Stanislav Kinsbursky [Mon, 25 Jun 2012 20:40:09 +0000]
SUNRPC: move per-net operations from svc_destroy()

upstream commit 786185b5f8abefa6a8a16695bb4a59c164d5a071.

The idea is to separate service destruction and per-net operations,
because these are two different things and the mix looks ugly.

Notes:

1) For NFS server this patch looks ugly (sorry for that). But these
place will be rewritten soon during NFSd containerization.

2) LockD per-net counter increase int lockd_up() was moved prior to
make_socks() to make lockd_down_net() call safe in case of error.

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoSUNRPC: new svc_bind() routine introduced
Stanislav Kinsbursky [Mon, 25 Jun 2012 20:40:08 +0000]
SUNRPC: new svc_bind() routine introduced

upstream commit 9793f7c88937e7ac07305ab1af1a519225836823.

This new routine is responsible for service registration in a specified
network context.

The idea is to separate service creation from per-net operations.

Note also: since registering service with svc_bind() can fail, the
service will be destroyed and during destruction it will try to
unregister itself from rpcbind. In this case unregistration has to be
skipped.

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoLockd: pass network namespace to creation and destruction routines
Stanislav Kinsbursky [Mon, 25 Jun 2012 20:40:07 +0000]
Lockd: pass network namespace to creation and destruction routines

upstream commit e3f70eadb7dddfb5a2bb9afff7abfc6ee17a29d0.

v2: dereference of most probably already released nlm_host removed in
nlmclnt_done() and reclaimer().

These routines are called from locks reclaimer() kernel thread. This thread
works in "init_net" network context and currently relays on persence on lockd
thread and it's per-net resources. Thus lockd_up() and lockd_down() can't relay
on current network context. So let's pass corrent one into them.

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoipheth: add support for iPad
Davide Gerhard [Mon, 25 Jun 2012 07:04:47 +0000]
ipheth: add support for iPad

commit 6de0298ec9c1edaf330b71b57346241ece8f3346 upstream.

This adds support for the iPad to the ipheth driver.
(product id = 0x129a)

Signed-off-by: Davide Gerhard <rainbow@irh.it>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoPCI: EHCI: fix crash during suspend on ASUS computers
Alan Stern [Mon, 9 Jul 2012 15:09:21 +0000]
PCI: EHCI: fix crash during suspend on ASUS computers

commit dbf0e4c7257f8d684ec1a3c919853464293de66e upstream.

Quite a few ASUS computers experience a nasty problem, related to the
EHCI controllers, when going into system suspend.  It was observed
that the problem didn't occur if the controllers were not put into the
D3 power state before starting the suspend, and commit
151b61284776be2d6f02d48c23c3625678960b97 (USB: EHCI: fix crash during
suspend on ASUS computers) was created to do this.

It turned out this approach messed up other computers that didn't have
the problem -- it prevented USB wakeup from working.  Consequently
commit c2fb8a3fa25513de8fedb38509b1f15a5bbee47b (USB: add
NO_D3_DURING_SLEEP flag and revert 151b61284776be2) was merged; it
reverted the earlier commit and added a whitelist of known good board
names.

Now we know the actual cause of the problem.  Thanks to AceLan Kao for
tracking it down.

According to him, an engineer at ASUS explained that some of their
BIOSes contain a bug that was added in an attempt to work around a
problem in early versions of Windows.  When the computer goes into S3
suspend, the BIOS tries to verify that the EHCI controllers were first
quiesced by the OS.  Nothing's wrong with this, but the BIOS does it
by checking that the PCI COMMAND registers contain 0 without checking
the controllers' power state.  If the register isn't 0, the BIOS
assumes the controller needs to be quiesced and tries to do so.  This
involves making various MMIO accesses to the controller, which don't
work very well if the controller is already in D3.  The end result is
a system hang or memory corruption.

Since the value in the PCI COMMAND register doesn't matter once the
controller has been suspended, and since the value will be restored
anyway when the controller is resumed, we can work around the BIOS bug
simply by setting the register to 0 during system suspend.  This patch
(as1590) does so and also reverts the second commit mentioned above,
which is now unnecessary.

In theory we could do this for every PCI device.  However to avoid
introducing new problems, the patch restricts itself to EHCI host
controllers.

Finally the affected systems can suspend with USB wakeup working
properly.

Reference: https://bugzilla.kernel.org/show_bug.cgi?id=37632
Reference: https://bugzilla.kernel.org/show_bug.cgi?id=42728
Based-on-patch-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Dâniel Fraga <fragabr@gmail.com>
Tested-by: Javier Marcet <jmarcet@gmail.com>
Tested-by: Andrey Rahmatullin <wrar@wrar.name>
Tested-by: Oleksij Rempel <bug-track@fisher-privat.net>
Tested-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoxhci: Fix hang on back-to-back Set TR Deq Ptr commands.
Sarah Sharp [Thu, 21 Jun 2012 23:28:30 +0000]
xhci: Fix hang on back-to-back Set TR Deq Ptr commands.

commit 0d9f78a92ef5e97d9fe51d9215ebe22f6f0d289d upstream.

The Microsoft LifeChat 3000 USB headset was causing a very reproducible
hang whenever it was plugged in.  At first, I thought the host
controller was producing bad transfer events, because the log was filled
with errors like:

xhci_hcd 0000:00:14.0: ERROR Transfer event TRB DMA ptr not part of current TD

However, it turned out to be an xHCI driver bug in the ring expansion
patches.  The bug is triggered When there are two ring segments, and a
TD that ends just before a link TRB, like so:

 ______________                     _____________
|              |              ---> | setup TRB B |
 ______________               |     _____________
|              |              |    |  data TRB B |
 ______________               |     _____________
| setup TRB A  | <-- deq      |    |  data TRB B |
 ______________               |     _____________
| data TRB A   |              |    |             | <-- enq, deq''
 ______________               |     _____________
| status TRB A |              |    |             |
 ______________               |     _____________
|  link TRB    |---------------    |  link TRB   |
 _____________  <--- deq'           _____________

TD A (the first control transfer) stalls on the data phase.  That halts
the ring.  The xHCI driver moves the hardware dequeue pointer to the
first TRB after the stalled transfer, which happens to be the link TRB.

Once the Set TR dequeue pointer command completes, the function
update_ring_for_set_deq_completion runs.  That function is supposed to
update the xHCI driver's dequeue pointer to match the internal hardware
dequeue pointer.  On the first call this would work fine, and the
software dequeue pointer would move to deq'.

However, if the transfer immediately after that stalled (TD B in this
case), another Set TR Dequeue command would be issued.  That would move
the hardware dequeue pointer to deq''.  Once that command completed,
update_ring_for_set_deq_completion would run again.

The original code would unconditionally increment the software dequeue
pointer, which moved the pointer off the ring segment into la-la-land.
The while loop would happy increment the dequeue pointer (possibly
wrapping it) until it matched the hardware pointer value.

The while loop would also access all the memory in between the first
ring segment and the second ring segment to determine if it was a link
TRB.  This could cause general protection faults, although it was
unlikely because the ring segments came from a DMA pool, and would often
have consecutive memory addresses.

If nothing in that space looked like a link TRB, the deq_seg pointer for
the ring would remain on the first segment.  Thus, the deq_seg and the
software dequeue pointer would get out of sync.

When the next transfer event came in after the stalled transfer, the
xHCI driver code would attempt to convert the software dequeue pointer
into a DMA address in order to compare the DMA address for the completed
transfer.  Since the deq_seg and the dequeue pointer were out of sync,
xhci_trb_virt_to_dma would return NULL.

The transfer event would get ignored, the transfer would eventually
timeout, and we would mistakenly convert the finished transfer to no-op
TRBs.  Some kernel driver (maybe xHCI?) would then get stuck in an
infinite loop in interrupt context, and the whole machine would hang.

This patch should be backported to kernels as old as 3.4, that contain
the commit b008df60c6369ba0290fa7daa177375407a12e07 "xHCI: count free
TRBs on transfer ring"

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: Andiry Xu <andiry.xu@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agousb: Add support for root hub port status CAS
Stanislaw Ledwon [Mon, 18 Jun 2012 13:20:00 +0000]
usb: Add support for root hub port status CAS

commit 8bea2bd37df08aaa599aa361a9f8b836ba98e554 upstream.

The host controller port status register supports CAS (Cold Attach
Status) bit. This bit could be set when USB3.0 device is connected
when system is in Sx state. When the system wakes to S0 this port
status with CAS bit is reported and this port can't be used by any
device.

When CAS bit is set the port should be reset by warm reset. This
was not supported by xhci driver.

The issue was found when pendrive was connected to suspended
platform. The link state of "Compliance Mode" was reported together
with CAS bit. This link state was also not supported by xhci and
core/hub.c.

The CAS bit is defined only for xhci root hub port and it is
not supported on regular hubs. The link status is used to force
warm reset on port. Make the USB core issue a warm reset when port
is in ether the 'inactive' or 'compliance mode'. Change the xHCI driver
to report 'compliance mode' when the CAS is set. This force warm reset
on the root hub port.

This patch should be backported to stable kernels as old as 3.2, that
contain the commit 10d674a82e553cb8a1f41027bb3c3e309b3f6804 "USB: When
hot reset for USB3 fails, try warm reset."

Signed-off-by: Stanislaw Ledwon <staszek.ledwon@linux.intel.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Acked-by: Andiry Xu <andiry.xu@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoUSB: option: Add MEDIATEK product ids
Gaosen Zhang [Thu, 5 Jul 2012 13:49:00 +0000]
USB: option: Add MEDIATEK product ids

commit aacef9c561a693341566a6850c451ce3df68cb9a upstream.

Signed-off-by: Gaosen Zhang <gaosen.zhang@mediatek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>