11 years agoV4L/DVB (6259): Fix vivi poll() method
Mauro Carvalho Chehab [Mon, 27 Aug 2007 10:37:34 +0000]
V4L/DVB (6259): Fix vivi poll() method

Due to the replace of videobuf_read_one to videobuf_read_stream, poll()
method implementation is wrong. This fixes poll() implementation, making
read of /dev/video? to work again.

With this method, an USB driver can use video-buf, without needing to
request memory from the DMA-safe area.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6257): Rename video-buf-dvb to videobuf-dvb to be consistent with the other...
Mauro Carvalho Chehab [Thu, 23 Aug 2007 21:12:08 +0000]
V4L/DVB (6257): Rename video-buf-dvb to videobuf-dvb to be consistent with the other patches

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6256): Remove the obsolete video-buf module
Mauro Carvalho Chehab [Thu, 23 Aug 2007 19:31:15 +0000]
V4L/DVB (6256): Remove the obsolete video-buf module

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
http://thread.gmane.org/gmane.comp.video.video4linux/34978/focus=34981
Reviewed-by: Ricardo Cerqueira <v4l@cerqueira.org>

11 years agoV4L/DVB (6255): Convert vivi to use videobuf-vmalloc
Mauro Carvalho Chehab [Fri, 3 Aug 2007 02:31:54 +0000]
V4L/DVB (6255): Convert vivi to use videobuf-vmalloc

This patch removes the usage of videobuf-dma-sg from vivi driver, using
instead videobuf-vmalloc. This way, vivi will be useful for testing the
newer method. Reverting this patch won't hurt vivi, since both methods
work fine.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6254): Add videobuf-vmalloc
Mauro Carvalho Chehab [Fri, 3 Aug 2007 02:31:33 +0000]
V4L/DVB (6254): Add videobuf-vmalloc

Adds a newer videobuf-vmalloc module. This module uses the same
videobuf controls, but implements memory allocation based on vmalloc
methods.

With this method, an USB driver can use video-buf, without needing to
request memory from the DMA-safe area.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6253): Convert vivi to use the newer videobuf-dma-sg module
Mauro Carvalho Chehab [Thu, 23 Aug 2007 19:41:14 +0000]
V4L/DVB (6253): Convert vivi to use the newer videobuf-dma-sg module

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6252): Adapt drivers to use the newer videobuf modules
Mauro Carvalho Chehab [Thu, 23 Aug 2007 19:37:49 +0000]
V4L/DVB (6252): Adapt drivers to use the newer videobuf modules

PCI-dependent videobuf_foo methods were renamed as videobuf_pci_foo.

Also, videobuf_dmabuf is now part of videobuf-dma-sg private struct.
So, to access it, a subroutine call is needed.

This patch renames all occurences of those function calls to be
consistent with the video-buf split.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
http://thread.gmane.org/gmane.comp.video.video4linux/34978/focus=34981
Reviewed-by: Ricardo Cerqueira <v4l@cerqueira.org>

11 years agoV4L/DVB (6251): Replace video-buf to a more generic approach
Mauro Carvalho Chehab [Thu, 23 Aug 2007 19:26:14 +0000]
V4L/DVB (6251): Replace video-buf to a more generic approach

video-buf currently does two different tasks:

- Manages video buffers with a common code that allows
  implementing all the V4L2 different modes of buffering;

- Controls memory allocations

While the first task is generic, the second were written to support PCI DMA
Scatter/Gather needs. The original approach can't even work for those
video capture hardware that don't support scatter/gather.

I did one approach to make it more generic. While the approach worked
fine for vivi driver, it were not generic enough to handle USB needs.

This patch creates two different modules, one containing the generic
video buffer handling (videobuf-core) and another with PCI DMA S/G.
After this patch, it would be simpler to write an USB video-buf and a
non-SG DMA module.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
http://thread.gmane.org/gmane.comp.video.video4linux/34978/focus=34981
Reviewed-by: Ricardo Cerqueira <v4l@cerqueira.org>

11 years agoV4L/DVB (6250): bw-qcam use data_reverse instead of manually poking the control regis...
Brett Warden [Tue, 2 Oct 2007 20:37:21 +0000]
V4L/DVB (6250): bw-qcam use data_reverse instead of manually poking the control register fix

coding-style repairs

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6249): Add Typhoon Tv-Tuner PCI to bttv-cards.c
Sascha Sommer [Tue, 2 Oct 2007 15:23:39 +0000]
V4L/DVB (6249): Add Typhoon Tv-Tuner PCI to bttv-cards.c

Adds an entry for the Typhoon Tv-Tuner PCI to bttv-cards.c

Signed-off-by: Sascha Sommer <saschasommer@freenet.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6247): Fix bug #8689: Fixes IR stop/start during suspend/resume
Mauro Carvalho Chehab [Mon, 1 Oct 2007 11:51:39 +0000]
V4L/DVB (6247): Fix bug #8689: Fixes IR stop/start during suspend/resume

IR workqueue should be disabled during suspend. This avoids some troubles, like
the one reported on bug #8689:

"The Hauppauge HVR 1100 ir-remote control does not work after resume from
suspend to ram or disk."

This patch disables IR before suspending, re-enabling it after resume.

Thanks to Peter Poklop <Peter.Poklop@gmx.at> for reporting it and helping with
the fix.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Reviewed-by: Peter Poklop <Peter.Poklop@gmx.at>

11 years agoV4L/DVB (6246): GemTek Radio card - Control Word
Trent Piepho [Mon, 1 Oct 2007 03:38:30 +0000]
V4L/DVB (6246):  GemTek Radio card - Control Word

Redoes the way the control word is stored and set.
The existing code was a lot more complicated than it needed to be.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Reviewed-by: Pekka Seppänen <pexu@kapsi.fi>

11 years agoV4L/DVB (6245): GemTek Radio card - frequency calculation
Trent Piepho [Mon, 1 Oct 2007 03:32:25 +0000]
V4L/DVB (6245):  GemTek Radio card - frequency calculation

Frequency calculation to use better math.  It's still the same
IF offset and step size (which are not the same as the datasheet says) as
the code was before.  It's just more efficient and accurate.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Reviewed-by: Pekka Seppänen <pexu@kapsi.fi>
Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6244): [PATCH 1/2] GemTek Radio card
Pekka Seppanen [Mon, 1 Oct 2007 03:27:55 +0000]
V4L/DVB (6244): [PATCH 1/2] GemTek Radio card

Code cleanup for GemTek Radio card driver. Removed unnecessary / invalid
I/O commands and rewrote code for tuning on-board BU2614FS chip. Adds
several new module params for power users. Includes automatic device
probing.

Signed-off-by: Pekka Seppanen <pexu@kapsi.fi>
Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com>
Reviewed-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6243): [PATCH 2/2] GemTek Radio card
Pekka Seppanen [Mon, 1 Oct 2007 00:49:01 +0000]
V4L/DVB (6243): [PATCH 2/2] GemTek Radio card

Details now match with radio-gemtek.c, eg. no more different ports.
Included a short note about cards that should be compatible with
radio-gemtek module.

Signed-off-by: Pekka Seppanen <pexu@kapsi.fi>
Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com>
Reviewed-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6241): fix typo in DVB_PLL Kconfig help text
Michael Krufky [Thu, 27 Sep 2007 14:37:19 +0000]
V4L/DVB (6241): fix typo in DVB_PLL Kconfig help text

s/driver/drives/1

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6238): bw-qcam: use data_reverse instead of manually poking the control...
Brett Warden [Fri, 28 Sep 2007 06:19:04 +0000]
V4L/DVB (6238): bw-qcam: use data_reverse instead of manually poking the control register

Fixes use of parport_write_control() to match the newer interface that
requires explicit parport_data_reverse() and parport_data_forward() calls.
This eliminates the following error message and restores the original
intended behavior:

parport0 (bw-qcam): use data_reverse for this!

Also increases threshold in qc_detect() from 300 to 400, as my camera often
results in a count of approx 330.  Added a kernel error message to indicate
detection failure.

Thanks Ray and Randy for your comments, and for pointing out that I
needed to reset the port to forward mode!

Signed-off-by: Brett T. Warden <brett.warden@gmail.com>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6237): Oops in pwc v4l driver
Oliver Neukum [Wed, 26 Sep 2007 13:19:01 +0000]
V4L/DVB (6237): Oops in pwc v4l driver

The pwc driver is defficient in locking, which can trigger an oops
when disconnecting.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
CC: Luc Saillard <luc@saillard.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6235): cafe_ccic: default to allocating DMA buffers at probe time
Andres Salomon [Wed, 19 Sep 2007 05:44:18 +0000]
V4L/DVB (6235): cafe_ccic: default to allocating DMA buffers at probe time

By default, we allocate DMA buffers when actually reading from the video
capture device.  On a system with 128MB or 256MB of ram, it's very easy
for that memory to quickly become fragmented.  We've had users report
having 30+MB of memory free, but the cafe_ccic driver is still unable to
allocate DMA buffers.

Our workaround has been to make use of the 'alloc_bufs_at_load' parameter
to allocate DMA buffers during device probing.  This patch makes DMA
buffer allocation happen during device probe by default, and changes
the parameter to 'alloc_bufs_at_read'.  The camera hardware is there,
if the cafe_ccic driver is enabled/loaded it should do its best to ensure
that the camera is actually usable; delaying DMA buffer allocation
saves an insignicant amount of memory, and causes the driver to be much
less useful.

Signed-off-by: Andres Salomon <dilinger@debian.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6232): dvb-pll: report whether input rf will be autoselected or set via...
Michael Krufky [Sun, 9 Sep 2007 08:16:34 +0000]
V4L/DVB (6232): dvb-pll: report whether input rf will be autoselected or set via insmod option

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6231): dvb-pll: always show pll name if forced via insmod option
Michael Krufky [Sun, 9 Sep 2007 08:08:30 +0000]
V4L/DVB (6231): dvb-pll: always show pll name if forced via insmod option

The name of the pll will be shown if forced via insmod option,
or if debug is enabled.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6230): dvb-pll: add module option to force dvb-pll desc id (for debug use...
Michael Krufky [Fri, 7 Sep 2007 21:27:43 +0000]
V4L/DVB (6230): dvb-pll: add module option to force dvb-pll desc id (for debug use only)

Add a module option to force the dvb-pll module to use an alternate dvb-pll
description without having to recompile the kernel.

Having a module option like this is useful in some cases, where the vendor
may release an alternate revision of the hardware using a different tuner,
but without changing the pci subsystem / usb device ids.

This option is intended for debugging purposes _only_.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6229): dvb-pll: increase DVB_PLL_MAX to 64
Michael Krufky [Sun, 9 Sep 2007 16:00:45 +0000]
V4L/DVB (6229): dvb-pll: increase DVB_PLL_MAX to 64

Increased DVB_PLL_MAX from 16 to a figure that would never be reached in a
practical sense.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6228): dvb-pll: add module option to specify rf input
Michael Krufky [Fri, 7 Sep 2007 21:19:57 +0000]
V4L/DVB (6228): dvb-pll: add module option to specify rf input

Add a module option to dvb-pll, called "input" to specify which rf
input to use on devices with multiple rf inputs.  If the module option
is not specified, then the driver will autoselect the rf input, as per
previous behavior.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6227): dvb-pll: store instance ID in dvb_pll_priv structure
Michael Krufky [Fri, 7 Sep 2007 21:11:15 +0000]
V4L/DVB (6227): dvb-pll: store instance ID in dvb_pll_priv structure

Store an instance ID in the dvb_pll_priv structure, so that module options
specific to a given pll may be used by the functions within the driver.

When debug is turned on, print a message indicating which pll was attached
and it's instance id.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6226): dvb-pll: pass fe pointer into dvb_pll_configure() and set() functions
Michael Krufky [Fri, 7 Sep 2007 21:03:58 +0000]
V4L/DVB (6226): dvb-pll: pass fe pointer into dvb_pll_configure() and set() functions

The pll-specific set() function will need access to the dvb_pll_priv
structure for new functionality.  This patch gives access to this
structure to the required functions.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6225): AverTV Studio 307 has only one composite input
Stas Sergeev [Mon, 17 Sep 2007 18:34:09 +0000]
V4L/DVB (6225): AverTV Studio 307 has only one composite input

AverTV Studio 307 has only one composite input.

Signed-off-by: Stas Sergeev <stsp@aknet.ru>
Acked-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6224): VIDEO_CX23885 depends on DVB_CORE
Michael Krufky [Tue, 18 Sep 2007 16:25:45 +0000]
V4L/DVB (6224): VIDEO_CX23885 depends on DVB_CORE

Fix the following dependency issue:

ERROR: "dvb_dmx_init" [drivers/media/video/video-buf-dvb.ko] undefined!
ERROR: "dvb_unregister_adapter" [drivers/media/video/video-buf-dvb.ko] undefined!
ERROR: "dvb_register_frontend" [drivers/media/video/video-buf-dvb.ko] undefined!
ERROR: "dvb_unregister_frontend" [drivers/media/video/video-buf-dvb.ko] undefined!
ERROR: "dvb_net_release" [drivers/media/video/video-buf-dvb.ko] undefined!
ERROR: "dvb_frontend_detach" [drivers/media/video/video-buf-dvb.ko] undefined!
ERROR: "dvb_dmxdev_release" [drivers/media/video/video-buf-dvb.ko] undefined!
ERROR: "dvb_dmx_swfilter" [drivers/media/video/video-buf-dvb.ko] undefined!
ERROR: "dvb_net_init" [drivers/media/video/video-buf-dvb.ko] undefined!
ERROR: "dvb_dmx_release" [drivers/media/video/video-buf-dvb.ko] undefined!
ERROR: "dvb_register_adapter" [drivers/media/video/video-buf-dvb.ko] undefined!
ERROR: "dvb_dmxdev_init" [drivers/media/video/video-buf-dvb.ko] undefined!

ERROR: "mt2131_attach" [drivers/media/video/cx23885/cx23885.ko] undefined!
ERROR: "s5h1409_attach" [drivers/media/video/cx23885/cx23885.ko] undefined!

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6222): select DVB_PLL if !DVB_FE_CUSTOMISE for FusionHDTV5 Express
Michael Krufky [Sat, 15 Sep 2007 21:45:10 +0000]
V4L/DVB (6222): select DVB_PLL if !DVB_FE_CUSTOMISE for FusionHDTV5 Express

VIDEO_CX23885 must select DVB_PLL if !DVB_FE_CUSTOMISE for FusionHDTV5 Express

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6221): budget-ci: select TT keymap for DVB-S TT 1500
Oliver Endriss [Tue, 18 Sep 2007 01:17:12 +0000]
V4L/DVB (6221): budget-ci: select TT keymap for DVB-S TT 1500

DVB-S TT 1500 must use the TT keymap.

Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6220): TCM825x: Add support for vidioc_int_g_ifparm call, small cleanups
Sakari Ailus [Thu, 30 Aug 2007 12:20:42 +0000]
V4L/DVB (6220): TCM825x: Add support for vidioc_int_g_ifparm call, small cleanups

vidioc_int_g_ifparm returns platform-specific information about the
interface settings used by the sensor. Support for [gs]_ext_clk has
been removed.

Fix indentation and remove useless & characters.

Remove experiment for typechecking slave callback function arguments.

Signed-off-by: Sakari Ailus <sakari.ailus@nokia.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6219): V4L: Int if: Remove [gs]_ext_clk
Sakari Ailus [Thu, 30 Aug 2007 12:20:41 +0000]
V4L/DVB (6219): V4L: Int if: Remove [gs]_ext_clk

Remove support for g_ext_clk and s_ext_clk. The same functionality is
now handled by g_ifparm.

Signed-off-by: Sakari Ailus <sakari.ailus@nokia.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6218): V4L: Int if: Use -ENOIOCTLCMD for nonexistent ioctls
Sakari Ailus [Thu, 30 Aug 2007 12:20:40 +0000]
V4L/DVB (6218): V4L: Int if: Use -ENOIOCTLCMD for nonexistent ioctls

Signed-off-by: Sakari Ailus <sakari.ailus@nokia.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6217): V4L: Int if: Add BT.656 interface support
Sakari Ailus [Thu, 30 Aug 2007 12:20:39 +0000]
V4L/DVB (6217): V4L: Int if: Add BT.656 interface support

This patch adds BT.656 interface settings for [gs]_ifparm.

Signed-off-by: Sakari Ailus <sakari.ailus@nokia.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6216): V4L: Int if: add vidioc_int_g_ifparm, other updates
Sakari Ailus [Thu, 30 Aug 2007 12:20:38 +0000]
V4L/DVB (6216): V4L: Int if: add vidioc_int_g_ifparm, other updates

vidioc_int_g_ifparm can be used to obtain hardware-specific information
about the interface used by the slave.

Rearrange v4l2-int-device.h as well.

Also remove useless & characters.

Signed-off-by: Sakari Ailus <sakari.ailus@nokia.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6215): Bugfix for saa6588.c, add forgotten spin_lock_init()
Hans-Jürgen Koch [Wed, 12 Sep 2007 19:20:43 +0000]
V4L/DVB (6215): Bugfix for saa6588.c, add forgotten spin_lock_init()

There's a serious bug in saa6588.c, it uses a non-initialized spin_lock.
Funny thing is that it works fine with bttv, but completly freezes the
machine if e.g. saa7134 is loaded.

Thanks to Derek Philip for reporting this bug on the rdsd-devel list.

This patch adds the missing spin_lock_init().

Signed-off-by: Hans J. Koch <hjk@linutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6214): usbvision: Don't support I2C_M_REV_DIR_ADDR
Jean Delvare [Sun, 9 Sep 2007 09:17:44 +0000]
V4L/DVB (6214): usbvision: Don't support I2C_M_REV_DIR_ADDR

I2C adapters should only support I2C_M_REV_DIR_ADDR if they really have
to (i.e. if they are connected to a broken I2C device which needs this
deviation from the standard I2C protocol.) As no media chip driver
uses I2C_M_REV_DIR_ADDR, I don't think that the usbvision driver needs
to support it.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Thierry Merle <thierry.merle@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6212): pvrusb2: I2C adapter tweaks from Jean Delvare
Jean Delvare [Sun, 9 Sep 2007 02:19:32 +0000]
V4L/DVB (6212): pvrusb2: I2C adapter tweaks from Jean Delvare

* I2C adapters aren't expected to handle I2C_M_NOSTART unless they
  really have to. As the pvrusb2 driver doesn't support it, I take it
  that it doesn't need it so it shouldn't mention it at all.
* I2C_FUNC_SMBUS_EMUL includes I2C_FUNC_SMBUS_BYTE_DATA so listing
  both is redundant.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6211): pvrusb2: Allocate a debug mask bit for reporting video standard things
Mike Isely [Sun, 9 Sep 2007 01:32:12 +0000]
V4L/DVB (6211): pvrusb2: Allocate a debug mask bit for reporting video standard things

It's useful to see specific details for how the pvrusb2 driver is
figuring out things related to the video standard, independent of
other initialization activities.  So let's set up a separate debug
mask bit for this and turn it on.

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6210): pvrusb2: Do a far better job at setting the default initial video...
Mike Isely [Sun, 9 Sep 2007 01:28:51 +0000]
V4L/DVB (6210): pvrusb2: Do a far better job at setting the default initial video standard

The v4l tveeprom logic tells us what video standards are supported by
the hardware, however it doesn't directly tell us what should be the
preferred initial standard.  For example "NTSC/NTSC-J" devices are
reported by tveeprom as support NTSC-M and PAL-M, and while that might
be true, in the vast majority of cases NTSC-M is really what the user
is going to want.  However the driver previously just arbitrarily
picked the "lowest numbered" standard as the initial default, which in
that case would have been PAL-M.  (And making matters more confusing -
this only caused real problems on 24xxx devices because the saa7115 on
29xxx seems to autodetect the right answer anyway.)  This change
implements an algorithm that uses the set of "supported" standards as
a hint to decide on the initial standard.  This algorithm ONLY comes
into play if the driver isn't specifically told what to do; said
another way - the user can always still change the standard via the
sysfs interface, via the usual V4L methods, or even specified as a
module parameter.  The idea here is only to pick a better starting
point if the user (or app) doesn't otherwise do something to set the
standard; otherwise this change has no real impact.

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6209): pvrusb2: Better discriminate among device types
Mike Isely [Sun, 9 Sep 2007 01:18:50 +0000]
V4L/DVB (6209): pvrusb2: Better discriminate among device types

This is a bunch of cleanup in various places to improve behavior based
on actual device type being driven.  While this doesn't actually
affect operation with existing devices, it cleans things up so that it
will be easier / more deterministic when other devices are added.
Ideally we should make stuff like this table-driven, but for now this
is just a series of small incremental (read: safe) improvements.

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6208): pvrusb2: Implement programmatic means to extract prom contents
Mike Isely [Sun, 9 Sep 2007 01:16:27 +0000]
V4L/DVB (6208): pvrusb2: Implement programmatic means to extract prom contents

The pvrusb2 driver already has a method for extracting the FX2's
program memory back out to a user application; this ability is used to
facilitate manual firmware extraction as per the procedure documented
on the pvrusb2 web site.  This change follows that pattern and
implements a corresponding method to grab the binary contents of the
PVR USB2 prom (which for PVR USB2 devices can contain information in
addition to the usual Hauppauge metadata).

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6207): pvrusb2: Fix a potential oops in an error leg cleanup
Mike Isely [Sun, 9 Sep 2007 01:11:46 +0000]
V4L/DVB (6207): pvrusb2: Fix a potential oops in an error leg cleanup

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6205): pvrusb2: Fix oops in error leg cleanup
Mike Isely [Sun, 9 Sep 2007 01:10:11 +0000]
V4L/DVB (6205): pvrusb2: Fix oops in error leg cleanup

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6203): Fix SVideo input on KWorld DVB-T 220 boards
Simon Farnsworth [Mon, 10 Sep 2007 16:37:26 +0000]
V4L/DVB (6203): Fix SVideo input on KWorld DVB-T 220 boards

Fix SVideo input on KWorld DVB-T 220 boards. Without this patch, the
luma pin on the SVideo input is treated as a composite in, and the
chroma pin is ignored.

Also, fix the radio, and provide a second composite input for people who
are used to the existing composite on SVideo connector behaviour.

Signed-off-by: Simon Farnsworth <simon.farnsworth@onelan.co.uk>
Reviewed-by: Hermann Pitton <hermann-pitton@arcor.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6200): cx23885: use a pointer to the required i2c bus in dvb_register function
Michael Krufky [Sun, 9 Sep 2007 06:55:34 +0000]
V4L/DVB (6200): cx23885: use a pointer to the required i2c bus in dvb_register function

Store a pointer to the required i2c_bus so that we do not put the wrong
analog demod into standby.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6199): cx23885: Changes to allow demodulators on each transport bus
Steven Toth [Sun, 9 Sep 2007 00:31:56 +0000]
V4L/DVB (6199): cx23885: Changes to allow demodulators on each transport bus

cx23885: Changes to allow demodulators on each transport bus.

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Reviewed-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6198): add CARDLIST.cx23885 to Documentation/
Michael Krufky [Sat, 8 Sep 2007 18:58:45 +0000]
V4L/DVB (6198): add CARDLIST.cx23885 to Documentation/

Cardlist generated by cx23885.pl

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6196): cx23885: add support for DViCO FusionHDTV 5 Express
Michael Krufky [Sat, 8 Sep 2007 18:17:13 +0000]
V4L/DVB (6196): cx23885: add support for DViCO FusionHDTV 5 Express

This patch adds digital ATSC / QAM support for the DViCO FusionHDTV5 Express.
Remote control is supported by ir-kbd-i2c, RTC is supported by rtc-isl1208.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6195): Changes to support MPEG TS on VIDB
Steven Toth [Sat, 8 Sep 2007 18:07:02 +0000]
V4L/DVB (6195): Changes to support MPEG TS on VIDB

Changes to support MPEG TS on VIDB

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Reviewed-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6194): Changes to support interrupts on VIDB
Steven Toth [Sat, 8 Sep 2007 17:21:03 +0000]
V4L/DVB (6194): Changes to support interrupts on VIDB

Changes to support interrupts on VIDB

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Reviewed-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6193): cx23885: define Video B Interrupt Status register bit values
Michael Krufky [Sat, 8 Sep 2007 14:25:37 +0000]
V4L/DVB (6193): cx23885: define Video B Interrupt Status register bit values

- define missing register bit values for VID_B
- corrected VID/VBI_B_GPCNT_CTL register addresses

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6192): Ensure start_dma() is capable of starting dma on port VIDB
Steven Toth [Thu, 6 Sep 2007 19:07:49 +0000]
V4L/DVB (6192): Ensure start_dma() is capable of starting dma on port VIDB

start_dma() would fail to start dma if a device used VIDB (portb).

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Reviewed-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6191): Removed a redundant switch()
Steven Toth [Thu, 6 Sep 2007 18:50:31 +0000]
V4L/DVB (6191): Removed a redundant switch()

The switch() statement is no longer required.

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Reviewed-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6190): cx23885: GPIO fix for non HVR1800lp boards
Steven Toth [Sat, 8 Sep 2007 22:08:17 +0000]
V4L/DVB (6190): cx23885: GPIO fix for non HVR1800lp boards

The HVR1250 and HVR1800 boards need the s5h1409 demod GPIO enabled.

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Reviewed-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6186): cx88-alsa: Remove some unused fields in card state struct
Trent Piepho [Fri, 7 Sep 2007 02:02:24 +0000]
V4L/DVB (6186): cx88-alsa: Remove some unused fields in card state struct

Not sure why they are there, but they don't do anything now.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6184): cx88-alsa: Make volume control stereo
Trent Piepho [Fri, 7 Sep 2007 02:02:23 +0000]
V4L/DVB (6184): cx88-alsa: Make volume control stereo

Use the balance control to make the mono volume control stereo.

Note that full range isn't supported.  The balance control attenuates one
channel by 0 to -63 dB, and the volume control provides additional attenuation
to both channels by another 0 to -63 dB.

So the channel with the most attenuation has a range of 0 to -126 dB, while
the other channel only has a range of 0 to -63 dB.  ALSA volume controls don't
appear to support this concept.  I just limited the range to 0 to -63 total.
Once you get to -63 dB, you're already at silence, so additional attenuation
is pretty much pointless anyway.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6181): cx88: auto-load rtc and ir receiver i2c modules for FusionHDTV5 RT...
Michael Krufky [Fri, 24 Aug 2007 04:32:31 +0000]
V4L/DVB (6181): cx88: auto-load rtc and ir receiver i2c modules for FusionHDTV5 RT Gold

Auto-load ir-kbd-i2c for ir receiver support, and rtc-isl1208 for rtc
support for the FusionHDTV5 RT Gold.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6180): tuner: don't probe 0x6b or 0x6f on cx88 boards
Michael Krufky [Fri, 24 Aug 2007 04:13:07 +0000]
V4L/DVB (6180): tuner: don't probe 0x6b or 0x6f on cx88 boards

Ignore 0x6b and 0x6f on cx88 boards. Some FusionHDTV cards
have an ir receiver at 0x6b and an RTC at 0x6f which can
get corrupted if probed.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6179): Clean up FusionHDTV ir code
Michael Krufky [Fri, 24 Aug 2007 04:07:12 +0000]
V4L/DVB (6179): Clean up FusionHDTV ir code

- fixed missing buttons in keymap.

- make function names & descriptions more generic,
  since this same ir receiver and remote is used in
  many FusionHDTV products.

- miscellaneous cleanups.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6178): add IR remote support for FusionHDTV 5 RT Gold
Chaogui Zhang [Fri, 24 Aug 2007 04:02:32 +0000]
V4L/DVB (6178): add IR remote support for FusionHDTV 5 RT Gold

This patch adds support for the built-in IR receiver of the DViCO
Fusion HDTV5 RT GOLD PCI card, using FusionHDTV MCE remote controller.

Signed-off-by: Chaogui Zhang <czhang1974@gmail.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6173): cx23885: Minor cleanup and important NMI comment placed in code
Steven Toth [Wed, 5 Sep 2007 00:50:49 +0000]
V4L/DVB (6173): cx23885: Minor cleanup and important NMI comment placed in code

I wanted to document the NMI assert issue inside the code, even though
it's already documented in the patch history. If/when the next cx23887
revision appears, is may need to be enabled on that also.

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6172): cx23885: Removing duplicate tuner and demod definitions
Steven Toth [Wed, 5 Sep 2007 00:40:47 +0000]
V4L/DVB (6172): cx23885: Removing duplicate tuner and demod definitions

A number of Hauppauge boards share the same tuner and demod
configurations. This patch removes duplicate structures.

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6171): cx23885: Cleaning up defines
Steven Toth [Wed, 5 Sep 2007 00:36:32 +0000]
V4L/DVB (6171): cx23885: Cleaning up defines

Moving some defines into the correct header file.

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6170): cx23885: General cleanup of old code
Steven Toth [Wed, 5 Sep 2007 00:32:41 +0000]
V4L/DVB (6170): cx23885: General cleanup of old code

Removed unused code.

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6169): Removed unused function mt2131_set_gpo()
Steven Toth [Wed, 5 Sep 2007 00:15:46 +0000]
V4L/DVB (6169): Removed unused function mt2131_set_gpo()

Unused code is removed.

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6168): cx23885: Added HVR1250 ATSC support
Steven Toth [Thu, 23 Aug 2007 00:01:20 +0000]
V4L/DVB (6168): cx23885: Added HVR1250 ATSC support

Adding support for the Hauppauge HVR1250 PCIe ATSC board.

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6167): cx23885: Changed PCI quirks to after bridge detech
Steven Toth [Wed, 22 Aug 2007 23:52:21 +0000]
V4L/DVB (6167): cx23885: Changed PCI quirks to after bridge detech

Changed the pci_quirks function to detech the bridge type before setting
the NMI clear bit, rather than detecting based on unique board id.

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6166): cx23885: Ensure pci_quirks is called after board identification
Steven Toth [Wed, 15 Aug 2007 02:35:16 +0000]
V4L/DVB (6166): cx23885: Ensure pci_quirks is called after board identification

The pci_quirks function was being called too early during initialisation,
it needs to be called after the board has been identified.

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6165): cx23885: fix Kconfig dependencies
Michael Krufky [Thu, 22 Mar 2007 04:01:53 +0000]
V4L/DVB (6165): cx23885: fix Kconfig dependencies

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6164): cx23885: turn off i2c_debug by default
Michael Krufky [Wed, 21 Mar 2007 02:18:04 +0000]
V4L/DVB (6164): cx23885: turn off i2c_debug by default

Turn off i2c_debug by default, to make the driver less verbose.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6163): cx23885: remove old comments
Michael Krufky [Wed, 21 Mar 2007 02:03:52 +0000]
V4L/DVB (6163): cx23885: remove old comments

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6162): cx23885: whitespace cleanups
Michael Krufky [Wed, 21 Mar 2007 02:00:18 +0000]
V4L/DVB (6162): cx23885: whitespace cleanups

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6161): cx23885-dvb.c doesnt need to include dvb-pll.h
Michael Krufky [Wed, 21 Mar 2007 00:32:12 +0000]
V4L/DVB (6161): cx23885-dvb.c doesnt need to include dvb-pll.h

The dvb-pll module is not being used by this driver.
Remove the unneeded #include.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6159): General code cleanup
Steven Toth [Tue, 20 Mar 2007 18:33:53 +0000]
V4L/DVB (6159): General code cleanup

Removed if 0'd code, removed cx88 references.

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6158): Fix MT2131 tuner lock status problem
Steven Toth [Tue, 20 Mar 2007 18:27:53 +0000]
V4L/DVB (6158): Fix MT2131 tuner lock status problem

The mt2131 tuner reports lock even when the hardware should not
lock. This patch allows the s5h1409 demodulator to be configured to query
either the tuner driver for status, or the demodulator status when the
application requests lock status. This avoids returning false CARRIER
and/or SIGNAL lock status.

S5H1409 and MT2131 drivers.  This is the remainder of the changeset, which
only touches cx23885-dvb.c

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6157): Removed the need to manually define .bridge for each card
Steven Toth [Mon, 19 Mar 2007 22:22:41 +0000]
V4L/DVB (6157): Removed the need to manually define .bridge for each card

Moved the field from cx23885_board to cx23885_dev and added code to
iautomatically set the bridge type based on the pci device id.

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6156): Added the I2C_FUNC_I2C support to the cx23885 i2c algo definition
Steven Toth [Mon, 19 Mar 2007 21:03:03 +0000]
V4L/DVB (6156): Added the I2C_FUNC_I2C support to the cx23885 i2c algo definition

This is required to support the cx258xx family of audio and video decoders.

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6155): Cleanup/remove code to access the sram memory maps
Steven Toth [Mon, 19 Mar 2007 21:01:07 +0000]
V4L/DVB (6155): Cleanup/remove code to access the sram memory maps

The cx23885 and cx23887 family use two different memory maps which govern
how the internal SRAM is configured. This patch streamlines the access to those
structures.

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6154): NMI hang and corrupt transport packet fixes
Steven Toth [Mon, 19 Mar 2007 20:46:03 +0000]
V4L/DVB (6154): NMI hang and corrupt transport packet fixes

The sram allocations for the cx23887 differ slightly from the cx23885.
This patch modifies the cx23887 specific sram memory map to reflect this.
As a result, interrupts and DMA handling have also been enabled in
cx23885_start_dma() for 887 specific boards.

ATSC streaming is now available on cx23885 and cx23887 bridges.

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6153): I2C bus 3 register was incorrect
Steven Toth [Fri, 16 Mar 2007 14:48:33 +0000]
V4L/DVB (6153): I2C bus 3 register was incorrect

I2C bus 3 was being initialised with the incorrect address register.

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6152): cx23885: forward compatibility fixes for recent kernels
Michael Krufky [Sun, 11 Mar 2007 23:57:52 +0000]
V4L/DVB (6152): cx23885: forward compatibility fixes for recent kernels

- fix #include for <media/video-buf-dvb.h>
- fix cx23885_irq declaration for 2.6.19 and later

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6151): include drivers/media/video/cx23885/Kconfig
Michael Krufky [Sun, 11 Mar 2007 23:55:18 +0000]
V4L/DVB (6151): include drivers/media/video/cx23885/Kconfig

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6150): Add CX23885/CX23887 PCIe bridge driver
Steven Toth [Sun, 11 Mar 2007 23:44:05 +0000]
V4L/DVB (6150): Add CX23885/CX23887 PCIe bridge driver

This is a new framework to support boards based on the CX23885/7 PCIe
bridge. The framework supports digital (no analog yet)

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6149): Add I2C_HW_B_CX23885 for Conexant 23885/23887 PCIe bridge
Steven Toth [Sun, 11 Mar 2007 23:44:05 +0000]
V4L/DVB (6149): Add I2C_HW_B_CX23885 for Conexant 23885/23887 PCIe bridge

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6142): cx25840: fix build warning
Michael Krufky [Sat, 1 Sep 2007 05:02:51 +0000]
V4L/DVB (6142): cx25840: fix build warning

Fix the following build warning:

CC [M] cx25840-core.o

cx25840-core.c: In function 'init_dll1':
cx25840-core.c:147: warning: implicit declaration of function 'udelay'

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6141): tuner: use get_rf_strength instead of get_status to determine signal...
Michael Krufky [Fri, 31 Aug 2007 20:38:02 +0000]
V4L/DVB (6141): tuner: use get_rf_strength instead of get_status to determine signal strength

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6140): tda8290: add get_rf_strength and improve status reading efficiency
Michael Krufky [Fri, 31 Aug 2007 20:53:00 +0000]
V4L/DVB (6140): tda8290: add get_rf_strength and improve status reading efficiency

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6139): tea5767: add get_rf_strength and improve status reading efficiency
Michael Krufky [Fri, 31 Aug 2007 19:40:14 +0000]
V4L/DVB (6139): tea5767: add get_rf_strength and improve status reading efficiency

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6138): tea5761: add get_rf_strength and improve status reading efficiency
Michael Krufky [Fri, 31 Aug 2007 19:39:57 +0000]
V4L/DVB (6138): tea5761: add get_rf_strength and improve status reading efficiency

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6137): tuner-simple: add get_rf_strength and improve status reading efficiency
Michael Krufky [Fri, 31 Aug 2007 19:39:39 +0000]
V4L/DVB (6137): tuner-simple: add get_rf_strength and improve status reading efficiency

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6136): dvb_frontend: add get_rf_strength function pointer to dvb_tuner_ops
Michael Krufky [Fri, 31 Aug 2007 02:00:43 +0000]
V4L/DVB (6136): dvb_frontend: add get_rf_strength function pointer to dvb_tuner_ops

Add get_rf_strength function pointer to dvb_tuner_ops, so that rf signal
strength can be read directly from the tuner driver by the dvb demodulator
driver and / or the analog tuning system.

This is an internal api addition -- userspace is not affected.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Acked-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6134): tuner: alter build to produce separate modules
Michael Krufky [Tue, 28 Aug 2007 00:59:35 +0000]
V4L/DVB (6134): tuner: alter build to produce separate modules

Break tuner.ko into separate modules. This was a quick change -
Tuner sub-drivers are still static-linked to tuner.ko, this will
change after using dvb_attach and removing the probing functions.

After this change, one can deselect undesired tuner sub-drivers via Kconfig.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Acked-by: Mike Isely <isely@pobox.com>
Acked-by: Steven Toth <stoth@hauppauge.com>
Acked-by: Patrick Boettcher <pb@linuxtv.org>
Acked-by: Jarod Wilson <jwilson@redhat.com>
Acked-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6133): tuner-simple: convert from tuner sub-driver into dvb_frontend module
Michael Krufky [Tue, 28 Aug 2007 00:59:08 +0000]
V4L/DVB (6133): tuner-simple: convert from tuner sub-driver into dvb_frontend module

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Acked-by: Mike Isely <isely@pobox.com>
Acked-by: Steven Toth <stoth@hauppauge.com>
Acked-by: Patrick Boettcher <pb@linuxtv.org>
Acked-by: Jarod Wilson <jwilson@redhat.com>
Acked-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6132): tea5767: convert from tuner sub-driver into dvb_frontend module
Michael Krufky [Tue, 28 Aug 2007 00:24:27 +0000]
V4L/DVB (6132): tea5767: convert from tuner sub-driver into dvb_frontend module

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Acked-by: Mike Isely <isely@pobox.com>
Acked-by: Steven Toth <stoth@hauppauge.com>
Acked-by: Patrick Boettcher <pb@linuxtv.org>
Acked-by: Jarod Wilson <jwilson@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6131): tea5761: convert from tuner sub-driver into dvb_frontend module
Michael Krufky [Tue, 28 Aug 2007 00:23:40 +0000]
V4L/DVB (6131): tea5761: convert from tuner sub-driver into dvb_frontend module

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Acked-by: Mike Isely <isely@pobox.com>
Acked-by: Steven Toth <stoth@hauppauge.com>
Acked-by: Patrick Boettcher <pb@linuxtv.org>
Acked-by: Jarod Wilson <jwilson@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6130): mt20xx: convert from tuner sub-driver into dvb_frontend module
Michael Krufky [Tue, 28 Aug 2007 00:23:08 +0000]
V4L/DVB (6130): mt20xx: convert from tuner sub-driver into dvb_frontend module

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Acked-by: Mike Isely <isely@pobox.com>
Acked-by: Steven Toth <stoth@hauppauge.com>
Acked-by: Patrick Boettcher <pb@linuxtv.org>
Acked-by: Jarod Wilson <jwilson@redhat.com>
Acked-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6129): tda8290: convert from tuner sub-driver into dvb_frontend module
Michael Krufky [Tue, 28 Aug 2007 00:22:20 +0000]
V4L/DVB (6129): tda8290: convert from tuner sub-driver into dvb_frontend module

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Acked-by: Mike Isely <isely@pobox.com>
Acked-by: Steven Toth <stoth@hauppauge.com>
Acked-by: Patrick Boettcher <pb@linuxtv.org>
Acked-by: Jarod Wilson <jwilson@redhat.com>
Acked-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6128): hybrid tuner refactoring core changes, phase 1
Michael Krufky [Tue, 21 Aug 2007 04:25:48 +0000]
V4L/DVB (6128): hybrid tuner refactoring core changes, phase 1

Prepare tuner-core for conversion of tuner sub-drivers into
dvb_frontend modules

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Acked-by: Mike Isely <isely@pobox.com>
Acked-by: Steven Toth <stoth@hauppauge.com>
Acked-by: Patrick Boettcher <pb@linuxtv.org>
Acked-by: Jarod Wilson <jwilson@redhat.com>
Acked-by: Oliver Endriss <o.endriss@gmx.de>
Acked-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6127): tuner: kill i2c_client interface to tuner sub-drivers
Michael Krufky [Tue, 21 Aug 2007 04:24:42 +0000]
V4L/DVB (6127): tuner: kill i2c_client interface to tuner sub-drivers

To ease the conversion of the analog tuner sub-drivers into dvb_frontend
style tuner modules, we must remove the i2c_client interface.

dvb_frontend style tuner modules use i2c_transfer directly on the i2c_adapter.

This change only alters the interface between tuner.ko and the tuner
sub-drivers. The v4l2 / i2c_client interface to tuner.ko remains intact.

This patch adds inline functions tuner_i2c_xfer_send, and tuner_i2c_xfer_recv,
to replace i2c_master_send and i2c_master_recv inside the tuner sub-drivers.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Acked-by: Mike Isely <isely@pobox.com>
Acked-by: Steven Toth <stoth@hauppauge.com>
Acked-by: Patrick Boettcher <pb@linuxtv.org>
Acked-by: Jarod Wilson <jwilson@redhat.com>
Acked-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>