9 years agoMIPS: ath79: add common GPIO buttons device
Gabor Juhos [Tue, 4 Jan 2011 20:28:21 +0000]
MIPS: ath79: add common GPIO buttons device

Almost all boards have one or more push buttons connected to GPIO lines.
This patch adds common code to register a platform_device for them.

The patch also adds support for the buttons on the PB44 board.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: Luis R. Rodriguez <lrodriguez@atheros.com>
Cc: Cliff Holden <Cliff.Holden@Atheros.com>
Cc: Kathy Giori <Kathy.Giori@Atheros.com>
Patchwork: https://patchwork.linux-mips.org/patch/1954/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: ath79: add common watchdog device
Gabor Juhos [Tue, 4 Jan 2011 20:28:20 +0000]
MIPS: ath79: add common watchdog device

All supported SoCs have a built-in hardware watchdog driver. This patch
registers a platform_device for that to make it usable.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: Luis R. Rodriguez <lrodriguez@atheros.com>
Cc: Cliff Holden <Cliff.Holden@Atheros.com>
Cc: Kathy Giori <Kathy.Giori@Atheros.com>
Patchwork: https://patchwork.linux-mips.org/patch/1955/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: ath79: add common GPIO LEDs device
Gabor Juhos [Tue, 4 Jan 2011 20:28:18 +0000]
MIPS: ath79: add common GPIO LEDs device

Almost all boards have one or more LEDs connected to GPIO lines. This
patch adds common code to register a platform_device for them.

The patch also adds support for the LEDs on the PB44 board.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: Luis R. Rodriguez <lrodriguez@atheros.com>
Cc: Cliff Holden <Cliff.Holden@Atheros.com>
Cc: Kathy Giori <Kathy.Giori@Atheros.com>
Patchwork: https://patchwork.linux-mips.org/patch/1953/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: ath79: add initial support for the Atheros PB44 reference board
Gabor Juhos [Tue, 4 Jan 2011 20:28:17 +0000]
MIPS: ath79: add initial support for the Atheros PB44 reference board

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: Imre Kaloz <kaloz@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: Luis R. Rodriguez <lrodriguez@atheros.com>
Cc: Cliff Holden <Cliff.Holden@Atheros.com>
Cc: Kathy Giori <Kathy.Giori@Atheros.com>
Patchwork: https://patchwork.linux-mips.org/patch/1950/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: ath79: utilize the MIPS multi-machine support
Gabor Juhos [Tue, 4 Jan 2011 20:28:16 +0000]
MIPS: ath79: utilize the MIPS multi-machine support

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: Imre Kaloz <kaloz@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: Luis R. Rodriguez <lrodriguez@atheros.com>
Cc: Cliff Holden <Cliff.Holden@Atheros.com>
Cc: Kathy Giori <Kathy.Giori@Atheros.com>
Patchwork: https://patchwork.linux-mips.org/patch/1949/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: ath79: add GPIOLIB support
Gabor Juhos [Tue, 4 Jan 2011 20:28:15 +0000]
MIPS: ath79: add GPIOLIB support

This patch implements generic GPIO routines for the built-in
GPIO controllers of the Atheros AR71XX/AR724X/AR913X SoCs.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: linux-mips@linux-mips.org
Cc: Luis R. Rodriguez <lrodriguez@atheros.com>
Cc: Cliff Holden <Cliff.Holden@Atheros.com>
Cc: Kathy Giori <Kathy.Giori@Atheros.com>
Patchwork: https://patchwork.linux-mips.org/patch/1948/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: Add initial support for the Atheros AR71XX/AR724X/AR931X SoCs
Gabor Juhos [Tue, 4 Jan 2011 20:28:14 +0000]
MIPS: Add initial support for the Atheros AR71XX/AR724X/AR931X SoCs

This patch adds initial support for various Atheros SoCs based on the
MIPS 24Kc core. The following models are supported at the moment:

  - AR7130
  - AR7141
  - AR7161
  - AR9130
  - AR9132
  - AR7240
  - AR7241
  - AR7242

The current patch contains minimal support only, but the resulting
kernel can boot into user-space with using of an initramfs image on
various boards which are using these SoCs. Support for more built-in
devices and individual boards will be implemented in further patches.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: Luis R. Rodriguez <lrodriguez@atheros.com>
Cc: Cliff Holden <Cliff.Holden@Atheros.com>
Cc: Kathy Giori <Kathy.Giori@Atheros.com>
Patchwork: https://patchwork.linux-mips.org/patch/1947/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: jump label: Add MIPS support.
David Daney [Tue, 28 Dec 2010 21:26:23 +0000]
MIPS: jump label: Add MIPS support.

In order not to be left behind, we add jump label support for MIPS.

Tested on 64-bit big endian (Octeon), and 32-bit little endian
(malta/qemu).

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jason Baron <jbaron@redhat.com>
Patchwork: https://patchwork.linux-mips.org/patch/1923/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: Use WARN() in uasm for better diagnostics.
David Daney [Tue, 28 Dec 2010 02:18:29 +0000]
MIPS: Use WARN() in uasm for better diagnostics.

On the off chance that uasm ever warns about overflow, there is no way
to know what the offending instruction is.

Change the printks to WARNs, so we can get a nice stack trace.  It has
the added benefit of being much more noticeable than the short single
line warning message, so is less likely to be ignored.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1905/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: Optimize TLB handlers for Octeon CPUs
David Daney [Tue, 28 Dec 2010 02:07:57 +0000]
MIPS: Optimize TLB handlers for Octeon CPUs

Octeon can use scratch registers in the TLB handlers.  Octeon II can
use LDX instructions.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1904/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: Add LDX and LWX instructions to uasm.
David Daney [Tue, 28 Dec 2010 02:07:56 +0000]
MIPS: Add LDX and LWX instructions to uasm.

Needed by Octeon II optimized TLB handlers.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Pachwork: https://patchwork.linux-mips.org/patch/1903/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: Use BBIT instructions in TLB handlers
David Daney [Mon, 20 Dec 2010 23:54:50 +0000]
MIPS: Use BBIT instructions in TLB handlers

If the CPU supports BBIT0 and BBIT1, use them in TLB handlers as they
are more efficient than an AND followed by an branch and then
restoring the clobbered register.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1873/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: Declare uasm bbit0 and bbit1 functions.
David Daney [Mon, 20 Dec 2010 23:54:49 +0000]
MIPS: Declare uasm bbit0 and bbit1 functions.

these are already defined, but declaring them allow them to be used
outside of uasm.c.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1872/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: Use C0_KScratch (if present) to hold PGD pointer.
David Daney [Tue, 21 Dec 2010 22:19:11 +0000]
MIPS: Use C0_KScratch (if present) to hold PGD pointer.

Decide at runtime to use either Context or KScratch to hold the PGD
pointer.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1876/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: Add DINSM to uasm.
David Daney [Tue, 21 Dec 2010 22:19:10 +0000]
MIPS: Add DINSM to uasm.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1875/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: Probe for presence of KScratch registers.
David Daney [Tue, 21 Dec 2010 22:19:09 +0000]
MIPS: Probe for presence of KScratch registers.

Probe c0_config4 for KScratch registers and report them in /proc/cpuinfo.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1877/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: Add generic support for multiple machines within a single kernel
Gabor Juhos [Tue, 23 Nov 2010 15:06:25 +0000]
MIPS: Add generic support for multiple machines within a single kernel

This patch adds a generic solution to support multiple machines based on
a given SoC within a single kernel image. It is implemented already for
several other architectures but MIPS has no generic support for that yet.

[Ralf: This competes with DT but DT is a much more complex solution and this
code has been used by OpenWRT for a long time so for now DT is a bad reason
to stop the merge but longer term this should be migrated to DT.]

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: kaloz@openwrt.org
Cc: Luis R. Rodriguez <lrodriguez@atheros.com>
Cc: Cliff Holden <Cliff.Holden@Atheros.com>
Patchwork: https://patchwork.linux-mips.org/patch/1814/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: Use printf extension %pR for struct resource
Joe Perches [Fri, 12 Nov 2010 21:37:52 +0000]
MIPS: Use printf extension %pR for struct resource

Using %pR standardizes the struct resource output.

Signed-off-by: Joe Perches <joe@perches.com>
To: Jiri Kosina <trivial@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/1772/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: Sibyte: Use vzalloc in sbbus profiler
Joe Perches [Fri, 5 Nov 2010 03:07:26 +0000]
MIPS: Sibyte: Use vzalloc in sbbus profiler

Signed-off-by: Joe Perches <joe@perches.com>
To: Jiri Kosina <trivial@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/1756/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMerge branch 'slab/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg...
Linus Torvalds [Sat, 15 Jan 2011 21:01:14 +0000]
Merge branch 'slab/urgent' of git://git./linux/kernel/git/penberg/slab-2.6

* 'slab/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6:
  Update Pekka's email address in MAINTAINERS
  mm/slab.c: make local symbols static
  slub: Avoid use of slub_lock in show_slab_objects()
  memory hotplug: one more lock on memory hotplug

9 years agoMerge branches 'core-fixes-for-linus', 'x86-fixes-for-linus', 'timers-fixes-for-linus...
Linus Torvalds [Sat, 15 Jan 2011 20:45:00 +0000]
Merge branches 'core-fixes-for-linus', 'x86-fixes-for-linus', 'timers-fixes-for-linus' and 'perf-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  rcu: avoid pointless blocked-task warnings
  rcu: demote SRCU_SYNCHRONIZE_DELAY from kernel-parameter status
  rtmutex: Fix comment about why new_owner can be NULL in wake_futex_pi()

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, olpc: Add missing Kconfig dependencies
  x86, mrst: Set correct APB timer IRQ affinity for secondary cpu
  x86: tsc: Fix calibration refinement conditionals to avoid divide by zero
  x86, ia64, acpi: Clean up x86-ism in drivers/acpi/numa.c

* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  timekeeping: Make local variables static
  time: Rename misnamed minsec argument of clocks_calc_mult_shift()

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  tracing: Remove syscall_exit_fields
  tracing: Only process module tracepoints once
  perf record: Add "nodelay" mode, disabled by default
  perf sched: Fix list of events, dropping unsupported ':r' modifier
  Revert "perf tools: Emit clearer message for sys_perf_event_open ENOENT return"
  perf top: Fix annotate segv
  perf evsel: Fix order of event list deletion

9 years agoMerge branch 'devel-stable' of master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Sat, 15 Jan 2011 20:33:40 +0000]
Merge branch 'devel-stable' of /home/rmk/linux-2.6-arm

* 'devel-stable' of master.kernel.org:/home/rmk/linux-2.6-arm: (161 commits)
  ARM: pxa: fix building issue of missing physmap.h
  ARM: mmp: PXA910 drive strength FAST using wrong value
  ARM: mmp: MMP2 drive strength FAST using wrong value
  ARM: pxa: fix recursive calls in pxa_low_gpio_chip
  AT91: Support for gsia18s board
  AT91: Acme Systems FOX Board G20 board files
  AT91: board-sam9m10g45ek.c: Remove duplicate inclusion of mach/hardware.h
  ARM: pxa: fix suspend/resume array index miscalculation
  ARM: pxa: use cpu_has_ipr() consistently in irq.c
  ARM: pxa: remove unused variable in clock-pxa3xx.c
  ARM: pxa: fix warning in zeus.c
  ARM: sa1111: fix typo in sa1111_retrigger_lowirq()
  ARM mxs: clkdev related compile fixes
  ARM i.MX mx31_3ds: Fix MC13783 regulator names
  ARM: plat-stmp3xxx: irq_data conversion.
  ARM: plat-spear: irq_data conversion.
  ARM: plat-orion: irq_data conversion.
  ARM: plat-omap: irq_data conversion.
  ARM: plat-nomadik: irq_data conversion.
  ARM: plat-mxc: irq_data conversion.
  ...

Fix up trivial conflict in arch/arm/plat-omap/gpio.c (Lennert
Buytenhek's irq_data conversion clashing with some omap irq updates)

9 years agoMerge branch 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Sat, 15 Jan 2011 20:29:50 +0000]
Merge branch 'fixes' of /home/rmk/linux-2.6-arm

* 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: fix missing branch in __error_a
  ARM: fix /proc/$PID/stack on SMP
  ARM: Fix build regression on SA11x0, PXA, and H720x targets
  ARM: 6625/1: use memblock memory regions for "System RAM" I/O resources
  ARM: fix wrongly patched constants
  ARM: 6624/1: fix dependency for CONFIG_SMP_ON_UP
  ARM: 6623/1: Thumb-2: Fix out-of-range offset for Thumb-2 in proc-v7.S
  ARM: 6622/1: fix dma_unmap_sg() documentation
  ARM: 6621/1: bitops: remove condition code clobber for CLZ
  ARM: 6620/1: Change misleading warning when CONFIG_CMDLINE_FORCE is used
  ARM: 6619/1: nommu: avoid mapping vectors page when !CONFIG_MMU
  ARM: sched_clock: make minsec argument to clocks_calc_mult_shift() zero
  ARM: sched_clock: allow init_sched_clock() to be called early
  ARM: integrator: fix compile warning in cpu.c
  ARM: 6616/1: Fix ep93xx-fb init/exit annotations
  ARM: twd: fix display of twd frequency
  ARM: udelay: prevent math rounding resulting in short udelays

9 years agoMerge branch 'tip/perf/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/roste...
Ingo Molnar [Sat, 15 Jan 2011 14:23:27 +0000]
Merge branch 'tip/perf/urgent' of git://git./linux/kernel/git/rostedt/linux-2.6-trace into perf/urgent

9 years agoMerge branch 'for-rmk' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux...
Russell King [Sat, 15 Jan 2011 13:24:02 +0000]
Merge branch 'for-rmk' of git://git./linux/kernel/git/kgene/linux-samsung into devel-stable

9 years agoMerge branch 'devel' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa...
Russell King [Sat, 15 Jan 2011 12:39:04 +0000]
Merge branch 'devel' of git://git./linux/kernel/git/ycmiao/pxa-linux-2.6 into devel-stable

9 years agoUpdate Pekka's email address in MAINTAINERS
Pekka Enberg [Sat, 15 Jan 2011 11:30:04 +0000]
Update Pekka's email address in MAINTAINERS

Signed-off-by: Pekka Enberg <penberg@kernel.org>

9 years agomm/slab.c: make local symbols static
H Hartley Sweeten [Tue, 11 Jan 2011 23:49:32 +0000]
mm/slab.c: make local symbols static

Local symbols should be static.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Matt Mackall <mpm@selenic.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>

9 years agoMerge branch 'slub/hotplug' into slab/urgent
Pekka Enberg [Sat, 15 Jan 2011 11:28:17 +0000]
Merge branch 'slub/hotplug' into slab/urgent

9 years agoARM: fix missing branch in __error_a
Russell King [Sat, 15 Jan 2011 11:19:19 +0000]
ARM: fix missing branch in __error_a

When DEBUG_LL is not set, we don't want __error_a re-entering
__lookup_machine_type - we want it to go to the error function.  This
used to be the case before we reorganized the layout for hotplug cpu,
as we used to fall through to __error.  With the changed layout, we
need an explicit branch here instead.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

9 years agoARM: pxa: fix building issue of missing physmap.h
Eric Miao [Fri, 14 Jan 2011 17:01:00 +0000]
ARM: pxa: fix building issue of missing physmap.h

Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

9 years agoARM: mmp: PXA910 drive strength FAST using wrong value
Philip Rakity [Fri, 7 Jan 2011 19:27:46 +0000]
ARM: mmp: PXA910 drive strength FAST using wrong value

Drive strength for PXA910 is a 2 bit value but because of the mapping in
plat-pxa/mfp.h needs to be shifted up one bit to handle real
location in mfp registers.  (MMP2 and PXA910 drive strength start
at bit 11 while PXA168 starts at bit 10).

Values 0, 1, 2, and 3 effectively need to be
0, 2, 4, and 6 to fit into register.  8 does not work.

Signed-off-by: Philip Rakity <prakity@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

9 years agoARM: mmp: MMP2 drive strength FAST using wrong value
Philip Rakity [Fri, 7 Jan 2011 19:26:52 +0000]
ARM: mmp: MMP2 drive strength FAST using wrong value

Drive strength for MMP2 is a 2 bit value but because of the mapping in
plat-pxa/mfp.h needs to be shifted up one bit to handle real
location in mfp registers.  (MMP2 and PXA910 drive strength start
at bit 11 while PXA168 starts at bit 10).

Values 0, 1, 2, and 3 effectively need to be
0, 2, 4, and 6 to fit into register.  8 does not work.

Signed-off-by: Philip Rakity <prakity@marvell.com>
Tested-by: John Watlington <wad@laptop.org>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

9 years agoARM: pxa: fix recursive calls in pxa_low_gpio_chip
Eric Miao [Wed, 12 Jan 2011 22:42:24 +0000]
ARM: pxa: fix recursive calls in pxa_low_gpio_chip

Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Tested-by: Marek Vasut <marek.vasut@gmail.com>

9 years agoARM: fix /proc/$PID/stack on SMP
Russell King [Sat, 15 Jan 2011 09:27:04 +0000]
ARM: fix /proc/$PID/stack on SMP

Rabin Vincent reports:
| On SMP, this BUG() in save_stack_trace_tsk() can be easily triggered
| from user space by reading /proc/$PID/stack, where $PID is any pid but
| the current process:
|
| if (tsk != current) {
| #ifdef CONFIG_SMP
| /*
|  * What guarantees do we have here that 'tsk'
|  * is not running on another CPU?
|  */
| BUG();
| #else

Fix this by replacing the BUG() with an entry to terminate the stack
trace, returning an empty trace - I'd rather not expose the dwarf
unwinder to a volatile stack of a running thread.

Reported-by: Rabin Vincent <rabin@rab.in>
Tested-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

9 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-post-merge-2.6
Linus Torvalds [Sat, 15 Jan 2011 00:29:49 +0000]
Merge git://git./linux/kernel/git/jejb/scsi-post-merge-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-post-merge-2.6:
  [SCSI] target: Add LIO target core v4.0.0-rc6
  [SCSI] sd,sr: kill compat SDEV_MEDIA_CHANGE event
  [SCSI] sd: implement sd_check_events()

9 years agoARM: Fix build regression on SA11x0, PXA, and H720x targets
Russell King [Sat, 15 Jan 2011 00:14:25 +0000]
ARM: Fix build regression on SA11x0, PXA, and H720x targets

Build errors similar this appeared in todays kautobuild for the above
targets:

In file included from arch/arm/include/asm/pgtable.h:461,
                 from arch/arm/mach-pxa/generic.c:26:
include/asm-generic/pgtable.h: In function 'ptep_test_and_clear_young':
include/asm-generic/pgtable.h:29: error: dereferencing pointer to incomplete type

None of the .c files including asm/pgtable.h with this error is using
this header, so simply remove the include.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

9 years agoxen: export arbitrary_virt_to_machine
Stephen Rothwell [Fri, 14 Jan 2011 23:36:26 +0000]
xen: export arbitrary_virt_to_machine

Fixes this build error:

 ERROR: "arbitrary_virt_to_machine" [drivers/xen/xen-gntdev.ko] undefined!

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoRevert "drm: Update fbdev fb_fix_screeninfo"
Dave Airlie [Fri, 14 Jan 2011 23:27:00 +0000]
Revert "drm: Update fbdev fb_fix_screeninfo"

This reverts commit dfe63bb0ad9810db13aab0058caba97866e0a681.

This commit was causing nouveau not to work properly, for -rc1 I'd
prefer it worked and we can look if this is useful for 2.6.39.

Cc: James Simmons <jsimmons@infradead.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoMerge branch 'next-spi' of git://git.secretlab.ca/git/linux-2.6
Linus Torvalds [Fri, 14 Jan 2011 23:24:37 +0000]
Merge branch 'next-spi' of git://git.secretlab.ca/git/linux-2.6

* 'next-spi' of git://git.secretlab.ca/git/linux-2.6:
  spi/amba-pl022: fixing compilation warning.
  spi: Enable SPI driver for S5P6440 and S5P6450
  mmc: sdhci-of: fix build on non-powerpc platforms
  spi/imx: Add i.MX53 support
  spi/dw_spi: don't treat NULL clk as an error
  spi: tegra: don't treat NULL clk as an error

9 years agoMerge branch 'for-linus' of git://oss.sgi.com/xfs/xfs
Linus Torvalds [Fri, 14 Jan 2011 23:24:17 +0000]
Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfs

* 'for-linus' of git://oss.sgi.com/xfs/xfs:
  xfs: prevent NMI timeouts in cmn_err
  xfs: Add log level to assertion printk
  xfs: fix an assignment within an ASSERT()
  xfs: fix error handling for synchronous writes
  xfs: add FITRIM support
  xfs: ensure log covering transactions are synchronous
  xfs: serialise unaligned direct IOs
  xfs: factor common write setup code
  xfs: split buffered IO write path from xfs_file_aio_write
  xfs: split direct IO write path from xfs_file_aio_write
  xfs: introduce xfs_rw_lock() helpers for locking the inode
  xfs: factor post-write newsize updates
  xfs: factor common post-write isize handling code
  xfs: ensure sync write errors are returned

9 years agoMerge branch 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvar...
Linus Torvalds [Fri, 14 Jan 2011 23:23:53 +0000]
Merge branch 'i2c-for-linus' of git://git./linux/kernel/git/jdelvare/staging

* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  i2c: Encourage move to dev_pm_ops by warning on use of legacy methods
  i2c: Factor out runtime suspend checks from PM operations
  i2c: Unregister dummy devices last on adapter removal

9 years agoPCI / ACPI: Fix build issue in pci_root.c for !CONFIG_PCIEPORTBUS
Markus Trippelsdorf [Fri, 14 Jan 2011 23:07:22 +0000]
PCI / ACPI: Fix build issue in pci_root.c for !CONFIG_PCIEPORTBUS

The compilation of drivers/acpi/pci_root.c fails if
CONFIG_PCIEPORTBUS is unset.  Fix the problem.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoACPI / ACPICA: Initialize the global lock spinlock as appropriate
Rafael J. Wysocki [Fri, 14 Jan 2011 22:25:57 +0000]
ACPI / ACPICA: Initialize the global lock spinlock as appropriate

Commit 9cd0314 (ACPI / ACPICA: Fix global lock acquisition) forgot to
initialize the spinlock it added.  Fix that.

Reported-and-tested-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Tested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agotracing: Remove syscall_exit_fields
Lai Jiangshan [Fri, 14 Jan 2011 09:49:02 +0000]
tracing: Remove syscall_exit_fields

There is no need for syscall_exit_fields as the syscall
exit event class can already host the fields in its structure,
like most other trace events do by default. Use that
default behavior instead.

Following this scheme, we don't need anymore to override the
get_fields() callback of the syscall exit event class either.

Hence both syscall_exit_fields and syscall_get_exit_fields() can
be removed.

Also changed some indentation to keep the following under 80
characters:

".fields = LIST_HEAD_INIT(event_class_syscall_exit.fields),"

Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
LKML-Reference: <4D301C0E.8090408@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

9 years agospi/amba-pl022: fixing compilation warning.
Viresh Kumar [Thu, 13 Jan 2011 11:54:22 +0000]
spi/amba-pl022: fixing compilation warning.

clk_freq is used uninitialized in pl022_setup routine. This patch
fix compilation warning for using uninitialized variable

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

9 years agoMerge branch 'for_rmk' of git://github.com/at91linux/linux-2.6-at91 into devel-stable
Russell King [Fri, 14 Jan 2011 22:17:32 +0000]
Merge branch 'for_rmk' of git://github.com/at91linux/linux-2.6-at91 into devel-stable

9 years agoARM: 6625/1: use memblock memory regions for "System RAM" I/O resources
Dima Zavin [Fri, 14 Jan 2011 22:05:14 +0000]
ARM: 6625/1: use memblock memory regions for "System RAM" I/O resources

Do not use memory bank info to request the "system ram" resources as
they do not track holes created by memblock_remove inside
machine's reserve callback. If the removed memory is passed as
platform_device's ioresource, then drivers that call
request_mem_region would fail due to a conflict with the incorrectly
configured system ram resource.

Instead, iterate through the regions of memblock.memory and add
those as "System RAM" resources.

Signed-off-by: Dima Zavin <dima@android.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

9 years agoMerge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
Linus Torvalds [Fri, 14 Jan 2011 21:32:07 +0000]
Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  block: restore multiple bd_link_disk_holder() support
  block cfq: compensate preempted queue even if it has no slice assigned
  block cfq: make queue preempt work for queues from different workload

9 years agoTurn d_set_d_op() BUG_ON() into WARN_ON_ONCE()
Linus Torvalds [Fri, 14 Jan 2011 21:26:18 +0000]
Turn d_set_d_op() BUG_ON() into WARN_ON_ONCE()

It's indicative of a real problem, and it actually triggers with
autofs4, but the BUG_ON() is excessive.  The autofs4 case is being fixed
(to only set d_op in the ->lookup method) but not merged yet.  In the
meantime this gets the code limping along.

Reported-by: Alex Elder <aelder@sgi.com>
Cc: Ian Kent <raven@themaw.net>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Fri, 14 Jan 2011 21:25:30 +0000]
Merge git://git./linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (47 commits)
  GRETH: resolve SMP issues and other problems
  GRETH: handle frame error interrupts
  GRETH: avoid writing bad speed/duplex when setting transfer mode
  GRETH: fixed skb buffer memory leak on frame errors
  GRETH: GBit transmit descriptor handling optimization
  GRETH: fix opening/closing
  GRETH: added raw AMBA vendor/device number to match against.
  cassini: Fix build bustage on x86.
  e1000e: consistent use of Rx/Tx vs. RX/TX/rx/tx in comments/logs
  e1000e: update Copyright for 2011
  e1000: Avoid unhandled IRQ
  r8169: keep firmware in memory.
  netdev: tilepro: Use is_unicast_ether_addr helper
  etherdevice.h: Add is_unicast_ether_addr function
  ks8695net: Use default implementation of ethtool_ops::get_link
  ks8695net: Disable non-working ethtool operations
  USB CDC NCM: Don't deref NULL in cdc_ncm_rx_fixup() and don't use uninitialized variable.
  vxge: Remember to release firmware after upgrading firmware
  netdev: bfin_mac: Remove is_multicast_ether_addr use in netdev_for_each_mc_addr
  ipsec: update MAX_AH_AUTH_LEN to support sha512
  ...

9 years agoMerge branch 'for-2.6.38' of git://linux-nfs.org/~bfields/linux
Linus Torvalds [Fri, 14 Jan 2011 21:17:26 +0000]
Merge branch 'for-2.6.38' of git://linux-nfs.org/~bfields/linux

* 'for-2.6.38' of git://linux-nfs.org/~bfields/linux: (62 commits)
  nfsd4: fix callback restarting
  nfsd: break lease on unlink, link, and rename
  nfsd4: break lease on nfsd setattr
  nfsd: don't support msnfs export option
  nfsd4: initialize cb_per_client
  nfsd4: allow restarting callbacks
  nfsd4: simplify nfsd4_cb_prepare
  nfsd4: give out delegations more quickly in 4.1 case
  nfsd4: add helper function to run callbacks
  nfsd4: make sure sequence flags are set after destroy_session
  nfsd4: re-probe callback on connection loss
  nfsd4: set sequence flag when backchannel is down
  nfsd4: keep finer-grained callback status
  rpc: allow xprt_class->setup to return a preexisting xprt
  rpc: keep backchannel xprt as long as server connection
  rpc: move sk_bc_xprt to svc_xprt
  nfsd4: allow backchannel recovery
  nfsd4: support BIND_CONN_TO_SESSION
  nfsd4: modify session list under cl_lock
  Documentation: fl_mylease no longer exists
  ...

Fix up conflicts in fs/nfsd/vfs.c with the vfs-scale work.  The
vfs-scale work touched some msnfs cases, and this merge removes support
for that entirely, so the conflict was trivial to resolve.

9 years agoMerge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 14 Jan 2011 21:13:07 +0000]
Merge branch 'omap-fixes-for-linus' of git://git./linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (27 commits)
  omap4: Fix ULPI PHY init for ES1.0 SDP
  omap3: beaglexm: fix power on of DVI
  omap3: igep3: Add omap_reserve functionality
  omap3: beaglexm: fix DVI reset GPIO
  omap3: beaglexm: fix EHCI power up GPIO dir
  omap3: igep2: Add keypad support
  omap3: igep3: Fix IGEP module second MMC channel power supply
  omap3: igep3: Add USB EHCI support for IGEP module
  omap3: clocks: Fix build error 'CK_3430ES2' undeclared here
  arm: omap4: pandaboard: turn on PHY reference clock at init
  omap2plus: prm: Trvial build break fix for undefined reference to 'omap2_prm_read_mod_reg'
  omap2plus: voltage: Trivial linking fix for 'EINVAL' undeclared
  omap2plus: voltage: Trivial linking fix 'undefined reference'
  omap2plus: voltage: Trivial warning fix 'no return statement'
  omap2plus: clockdomain: Trivial fix for build break because of clktrctrl_mask
  arm: omap: gpio: don't access irq_desc array directly
  omap2+: pm_bus: make functions used as pointers as static
  OMAP: GPIO: fix _set_gpio_triggering() for OMAP2+
  OMAP2+: TWL: include pm header for init protos
  OMAP2+: TWL: make conversion routines static
  ...

Fix up conflicts in arch/arm/mach-omap2/board-omap3beagle.c ("DVI reset
GPIO" vs "use generic DPI panel driver")

9 years agoMerge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
Linus Torvalds [Fri, 14 Jan 2011 21:06:44 +0000]
Merge branch 'release' of git://git./linux/kernel/git/aegl/linux-2.6

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] fix ia64 build failure in pmdp_get_and_clear

9 years agoi2c: Encourage move to dev_pm_ops by warning on use of legacy methods
Mark Brown [Fri, 14 Jan 2011 21:03:50 +0000]
i2c: Encourage move to dev_pm_ops by warning on use of legacy methods

Since the PM core wishes to transition away from the legacy suspend
and resume methods and since removing them makes using PM core features
like runtime PM much easier start warning when a driver is registered
using the legacy methods.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

9 years agoi2c: Factor out runtime suspend checks from PM operations
Mark Brown [Fri, 14 Jan 2011 21:03:49 +0000]
i2c: Factor out runtime suspend checks from PM operations

When devices use dev_pm_ops the I2C API is implementing standard functionality
for integration with runtime PM and for checking for the presence of a per
device op. The PM core provides pm_generic_ functions implementing this
behaviour - use them to reduce coupling with future PM updates.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

9 years agoi2c: Unregister dummy devices last on adapter removal
Jean Delvare [Fri, 14 Jan 2011 21:03:49 +0000]
i2c: Unregister dummy devices last on adapter removal

Remove real devices first and dummy devices last. This gives device
driver which instantiated dummy devices themselves a chance to clean
them up before we do.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Hans Verkuil <hverkuil@xs4all.nl>
Cc: stable@kernel.org

9 years agoGRETH: resolve SMP issues and other problems
Daniel Hellstrom [Fri, 14 Jan 2011 03:02:43 +0000]
GRETH: resolve SMP issues and other problems

Fixes the following:
1. POLL should not enable IRQ when work is not completed
2. No locking between TX descriptor cleaning and XMIT descriptor handling
3. No locking between RX POLL and XMIT modifying control register
4. Since TX cleaning (called from POLL) is running in parallel with XMIT
   unnecessary locking is needed.
5. IRQ handler looks at RX frame status solely, this is wrong when IRQ is
   temporarily disabled (in POLL), and when IRQ is shared.
6. IRQ handler clears IRQ status, which is unnecessary
7. TX queue was stopped in preventing cause when not MAX_SKB_FRAGS+1
   descriptors were available after a SKB been scheduled by XMIT. Instead
   the TX queue is stopped first when not enough descriptors are available
   upon entering XMIT.

It was hard to split up this patch in smaller pieces since all are tied
together somehow.

Note the RX flag used in the interrupt handler does not signal that
interrupt was asserted, but that a frame was received. Same goes for TX.
Also, IRQ is not asserted when the RX flag is set before enabling IRQ
enable until a new frame is received. So extra care must be taken to
avoid enabling IRQ and all descriptors are already used, hence dead lock
will upon us. See new POLL implementation that enableds IRQ then look at
the RX flag to determine if one or more IRQs may have been missed. TX/RX
flags are cleared before handling previously enabled descriptors, this
ensures that the RX/TX flags are valid when determining if IRQ should be
turned on again.

By moving TX cleaning from POLL to XMIT in the standard case, removes some
locking trouble. Enabling TX cleaning from poll only when not enough TX
descriptors are available is safe because the TX queue is at the same time
stopped, thus XMIT will not be called. The TX queue is woken up again when
enough descriptrs are available.

TX Frames are always enabled with IRQ, however the TX IRQ Enable flag will
not be enabled until XMIT must wait for free descriptors.

Locking RX and XMIT parts of the driver from each other is needed because
the RX/TX enable bits share the same register.

Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoGRETH: handle frame error interrupts
Daniel Hellstrom [Fri, 14 Jan 2011 03:02:42 +0000]
GRETH: handle frame error interrupts

Frame error interrupts must also be handled since the RX flag only indicates
successful reception, it is unlikely but the old code may lead to dead lock
if 128 error frames are recieved in a row.

Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoGRETH: avoid writing bad speed/duplex when setting transfer mode
Daniel Hellstrom [Fri, 14 Jan 2011 03:02:41 +0000]
GRETH: avoid writing bad speed/duplex when setting transfer mode

Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoGRETH: fixed skb buffer memory leak on frame errors
Daniel Hellstrom [Fri, 14 Jan 2011 03:02:40 +0000]
GRETH: fixed skb buffer memory leak on frame errors

A new SKB buffer should not be allocated when the old SKB is reused.

Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoGRETH: GBit transmit descriptor handling optimization
Daniel Hellstrom [Fri, 14 Jan 2011 03:02:39 +0000]
GRETH: GBit transmit descriptor handling optimization

It is safe to enable all fragments before enabling the first descriptor,
this way all descriptors don't have to be processed twice, added extra
memory barrier.

Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoGRETH: fix opening/closing
Daniel Hellstrom [Fri, 14 Jan 2011 03:02:38 +0000]
GRETH: fix opening/closing

When NAPI is disabled there is no point in having IRQs enabled, TX/RX
should be off before clearing the TX/RX descriptor rings.

Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoGRETH: added raw AMBA vendor/device number to match against.
Daniel Hellstrom [Fri, 14 Jan 2011 03:02:37 +0000]
GRETH: added raw AMBA vendor/device number to match against.

Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoMerge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/jkirsher/net-2.6
David S. Miller [Fri, 14 Jan 2011 20:43:10 +0000]
Merge branch 'master' of /linux/kernel/git/jkirsher/net-2.6

9 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/bwh/sfc-2.6
David S. Miller [Fri, 14 Jan 2011 20:42:38 +0000]
Merge branch 'master' of git://git./linux/kernel/git/bwh/sfc-2.6

9 years agoMerge branch 'vhost-net' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
David S. Miller [Fri, 14 Jan 2011 20:41:47 +0000]
Merge branch 'vhost-net' of git://git./linux/kernel/git/mst/vhost

9 years agocassini: Fix build bustage on x86.
David S. Miller [Fri, 14 Jan 2011 20:39:59 +0000]
cassini: Fix build bustage on x86.

Unfortunately, not all CONFIG_OF platforms provide
pci_device_to_OF_node().

Change the test to CONFIG_SPARC for now to deal with
the build regressions.

Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agox86, olpc: Add missing Kconfig dependencies
H. Peter Anvin [Fri, 14 Jan 2011 19:57:06 +0000]
x86, olpc: Add missing Kconfig dependencies

OLPC uses select for OLPC_OPENFIRMWARE, which means OLPC has to
enforce the dependencies for OLPC_OPENFIRMWARE.  Make sure it does so.

Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Daniel Drake <dsd@laptop.org>
Cc: Andres Salomon <dilinger@queued.net>
Cc: Grant Likely <grant.likely@secretlab.ca>
LKML-Reference: <20100923162846.D8D409D401B@zog.reactivated.net>
Cc: <stable@kernel.org> 2.6.37

9 years agox86, mrst: Set correct APB timer IRQ affinity for secondary cpu
Jacob Pan [Fri, 14 Jan 2011 00:06:44 +0000]
x86, mrst: Set correct APB timer IRQ affinity for secondary cpu

Offlining the secondary CPU causes the timer irq affinity to be set to
CPU 0. When the secondary CPU is back online again, the wrong irq
affinity will be used.

This patch ensures secondary per CPU timer always has the correct
IRQ affinity when enabled.

Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
LKML-Reference: <1294963604-18111-1-git-send-email-jacob.jun.pan@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: <stable@kernel.org> 2.6.37

9 years agonfsd4: fix callback restarting
J. Bruce Fields [Fri, 14 Jan 2011 19:25:48 +0000]
nfsd4: fix callback restarting

Ensure a new callback is added to the client's list of callbacks at most
once.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>

9 years agoMerge branch 'devicetree/next' into spi/next
Grant Likely [Fri, 14 Jan 2011 19:09:49 +0000]
Merge branch 'devicetree/next' into spi/next

9 years ago[IA64] fix ia64 build failure in pmdp_get_and_clear
Andrea Arcangeli [Fri, 14 Jan 2011 18:56:38 +0000]
[IA64] fix ia64 build failure in pmdp_get_and_clear

Implement __pmd macro for ia64 too.

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

9 years agoAT91: Support for gsia18s board
Igor Plyatov [Fri, 14 Jan 2011 18:01:13 +0000]
AT91: Support for gsia18s board

The GS_IA18_S (GMS) is a carrier board from GeoSIG Ltd used with the
Stamp9G20 SoM from Taskit company.
It operate as an internet accelerometer.

Signed-off-by: Igor Plyatov <plyatov@gmail.com>
[nicolas.ferre@atmel.com: rm Kconfig, whitespace fixes, change machine name]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

9 years agoAT91: Acme Systems FOX Board G20 board files
Sergio Tanzilli [Thu, 14 Oct 2010 00:06:26 +0000]
AT91: Acme Systems FOX Board G20 board files

Signed-off-by: Sergio Tanzilli <tanzilli@acmesystems.it>
[nicolas.ferre@atmel.com: whitespace fixes, change machine name]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

9 years agoAT91: board-sam9m10g45ek.c: Remove duplicate inclusion of mach/hardware.h
Jesper Juhl [Mon, 10 Jan 2011 21:29:32 +0000]
AT91: board-sam9m10g45ek.c: Remove duplicate inclusion of mach/hardware.h

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

9 years agoMerge branch 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ickle...
Linus Torvalds [Fri, 14 Jan 2011 18:30:09 +0000]
Merge branch 'drm-intel-fixes' of git://git./linux/kernel/git/ickle/drm-intel

* 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel:
  drm/i915/lvds: Add AOpen i915GMm-HFS to the list of false-positive LVDS
  agp/intel: Fix device names of i845 and 845G
  drm/i915: Disable GPU semaphores on SandyBridge mobile
  drm/i915/execbuffer: Clear domains before beginning reloc processing
  drm/i915/execbuffer: Reorder relocations to match new object order
  drm/i915: Fix error handler to capture the first batch after the seqno
  drm/i915: Add a module option to override the use of SSC
  drm/i915/panel: The backlight is enabled if the current value is non-zero
  drm/i915/debugfs: Correct format after changing type of err object 'size'

9 years agoblock: restore multiple bd_link_disk_holder() support
Tejun Heo [Fri, 14 Jan 2011 17:43:57 +0000]
block: restore multiple bd_link_disk_holder() support

Commit e09b457b (block: simplify holder symlink handling) incorrectly
assumed that there is only one link at maximum.  dm may use multiple
links and expects block layer to track reference count for each link,
which is different from and unrelated to the exclusive device holder
identified by @holder when the device is opened.

Remove the single holder assumption and automatic removal of the link
and revive the per-link reference count tracking.  The code
essentially behaves the same as before commit e09b457b sans the
unnecessary kobject reference count dancing.

While at it, note that this facility should not be used by anyone else
than the current ones.  Sysfs symlinks shouldn't be abused like this
and the whole thing doesn't belong in the block layer at all.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Milan Broz <mbroz@redhat.com>
Cc: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Cc: Neil Brown <neilb@suse.de>
Cc: linux-raid@vger.kernel.org
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

9 years agoMerge branch 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes...
Linus Torvalds [Fri, 14 Jan 2011 17:29:05 +0000]
Merge branch 'linux-next' of git://git./linux/kernel/git/jbarnes/pci-2.6

* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  PCI/PM: Report wakeup events before resuming devices
  PCI/PM: Use pm_wakeup_event() directly for reporting wakeup events
  PCI: sysfs: Update ROM to include default owner write access
  x86/PCI: make Broadcom CNB20LE driver EMBEDDED and EXPERIMENTAL
  x86/PCI: don't use native Broadcom CNB20LE driver when ACPI is available
  PCI/ACPI: Request _OSC control once for each root bridge (v3)
  PCI: enable pci=bfsort by default on future Dell systems
  PCI/PCIe: Clear Root PME Status bits early during system resume
  PCI: pci-stub: ignore zero-length id parameters
  x86/PCI: irq and pci_ids patch for Intel Patsburg
  PCI: Skip id checking if no id is passed
  PCI: fix __pci_device_probe kernel-doc warning
  PCI: make pci_restore_state return void
  PCI: Disable ASPM if BIOS asks us to
  PCI: Add mask bit definition for MSI-X table
  PCI: MSI: Move MSI-X entry definition to pci_regs.h

Fix up trivial conflicts in drivers/net/{skge.c,sky2.c} that had in the
meantime been converted to not use legacy PCI power management, and thus
no longer use pci_restore_state() at all (and that caused trivial
conflicts with the "make pci_restore_state return void" patch)

9 years agox86: tsc: Fix calibration refinement conditionals to avoid divide by zero
John Stultz [Fri, 14 Jan 2011 17:06:28 +0000]
x86: tsc: Fix calibration refinement conditionals to avoid divide by zero

Konrad Wilk reported that the new delayed calibration crashes with a
divide by zero on Xen. The reason is that Xen sets the pmtimer
address, but reading from it returns 0xffffff. That results in the
ref_start and ref_stop value being the same, so the delta is zero
which causes the divide by zero later in the calculation.

The conditional (!hpet && !ref_start && !ref_stop) which sanity checks
the calibration reference values doesn't really make sense. If the
refs are null, but hpet is on, we still want to break out.

The div by zero would be possible to trigger by chance if both reads
from the hardware provided the exact same value (due to hardware
wrapping).

So checking if both the ref values are the same should handle if we
don't have hardware (both null) or if they are the same value (either by
invalid hardware, or by chance), avoiding the div by zero issue.

[ tglx: Applied the same fix to native_calibrate_tsc() where this
   check was copied from ]

Reported-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: John Stultz <johnstul@us.ibm.com>
LKML-Reference: <1295024788-15619-1-git-send-email-johnstul@us.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

9 years agoMerge git://git.infradead.org/battery-2.6
Linus Torvalds [Fri, 14 Jan 2011 17:25:59 +0000]
Merge git://git.infradead.org/battery-2.6

* git://git.infradead.org/battery-2.6: (21 commits)
  power_supply: Add MAX17042 Fuel Gauge Driver
  olpc_battery: Fix up XO-1.5 properties list
  olpc_battery: Add support for CURRENT_NOW and VOLTAGE_NOW
  olpc_battery: Add support for CHARGE_NOW
  olpc_battery: Add support for CHARGE_FULL_DESIGN
  olpc_battery: Ambient temperature is not available on XO-1.5
  jz4740-battery: Should include linux/io.h
  s3c_adc_battery: Add gpio_inverted field to pdata
  power_supply: Don't use flush_scheduled_work()
  power_supply: Fix use after free and memory leak
  gpio-charger: Fix potential race between irq handler and probe/remove
  gpio-charger: Provide default name for the power_supply
  gpio-charger: Check result of kzalloc
  jz4740-battery: Check if platform_data is supplied
  isp1704_charger: Detect charger after probe
  isp1704_charger: Set isp->dev before anything needs it
  isp1704_charger: Detect HUB/Host chargers
  isp1704_charger: Correct length for storing model
  power_supply: Add gpio charger driver
  jz4740-battery: Protect against concurrent battery readings
  ...

9 years agoafs: add afs_wq and use it instead of the system workqueue
Tejun Heo [Fri, 14 Jan 2011 15:56:37 +0000]
afs: add afs_wq and use it instead of the system workqueue

flush_scheduled_work() is going away.  afs needs to make sure all the
works it has queued have finished before being unloaded and there can
be arbitrary number of pending works.  Add afs_wq and use it as the
flush domain instead of the system workqueue.

Also, convert cancel_delayed_work() + flush_scheduled_work() to
cancel_delayed_work_sync() in afs_mntpt_kill_timer().

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: linux-afs@lists.infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agorxrpc: rxrpc_workqueue isn't used during memory reclaim
Tejun Heo [Fri, 14 Jan 2011 15:56:31 +0000]
rxrpc: rxrpc_workqueue isn't used during memory reclaim

rxrpc_workqueue isn't depended upon while reclaiming memory.  Convert
to alloc_workqueue() without WQ_MEM_RECLAIM.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: linux-afs@lists.infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoFS-Cache: Fix operation handling
Akshat Aranya [Fri, 14 Jan 2011 16:00:47 +0000]
FS-Cache: Fix operation handling

fscache_submit_exclusive_op() adds an operation to the pending list if
other operations are pending.  Fix the check for pending ops as n_ops
must be greater than 0 at the point it is checked as it is incremented
immediately before under lock.

Signed-off-by: Akshat Aranya <aranya@nec-labs.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoMerge branch 'vfs-scale-working' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Fri, 14 Jan 2011 17:08:29 +0000]
Merge branch 'vfs-scale-working' of git://git./linux/kernel/git/npiggin/linux-npiggin

* 'vfs-scale-working' of git://git.kernel.org/pub/scm/linux/kernel/git/npiggin/linux-npiggin:
  kernel: fix hlist_bl again
  cgroups: Fix a lockdep warning at cgroup removal
  fs: namei fix ->put_link on wrong inode in do_filp_open

9 years agoMerge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6
Linus Torvalds [Fri, 14 Jan 2011 17:08:00 +0000]
Merge branch 'for-next' of git://git./linux/kernel/git/sameo/mfd-2.6

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (59 commits)
  mfd: ab8500-core chip version cut 2.0 support
  mfd: Flag WM831x /IRQ as a wake source
  mfd: Convert WM831x away from legacy I2C PM operations
  regulator: Support MAX8998/LP3974 DVS-GPIO
  mfd: Support LP3974 RTC
  i2c: Convert SCx200 driver from using raw PCI to platform device
  x86: OLPC: convert olpc-xo1 driver from pci device to platform device
  mfd: MAX8998/LP3974 hibernation support
  mfd/ab8500: remove spi support
  mfd: Remove ARCH_U8500 dependency from AB8500
  misc: Make AB8500_PWM driver depend on U8500 due to PWM breakage
  mfd: Add __devexit annotation for vx855_remove
  mfd: twl6030 irq_data conversion.
  gpio: Fix cs5535 printk warnings
  misc: Fix cs5535 printk warnings
  mfd: Convert Wolfson MFD drivers to use irq_data accessor function
  mfd: Convert TWL4030 to new irq_ APIs
  mfd: Convert tps6586x driver to new irq_ API
  mfd: Convert tc6393xb driver to new irq_ APIs
  mfd: Convert t7166xb driver to new irq_ API
  ...

9 years agoPCI/PM: Report wakeup events before resuming devices
Rafael J. Wysocki [Wed, 29 Dec 2010 12:22:08 +0000]
PCI/PM: Report wakeup events before resuming devices

Make wakeup events be reported by the PCI subsystem before attempting to
resume devices or queuing up runtime resume requests for them, because
wakeup events should be reported as soon as they have been detected.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

9 years agoPCI/PM: Use pm_wakeup_event() directly for reporting wakeup events
Rafael J. Wysocki [Wed, 29 Dec 2010 12:21:23 +0000]
PCI/PM: Use pm_wakeup_event() directly for reporting wakeup events

After recent changes related to wakeup events pm_wakeup_event()
automatically checks if the given device is configured to signal wakeup,
so pci_wakeup_event() may be a static inline function calling
pm_wakeup_event() directly.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

9 years agoPCI: sysfs: Update ROM to include default owner write access
Alex Williamson [Wed, 5 Jan 2011 17:26:41 +0000]
PCI: sysfs: Update ROM to include default owner write access

The PCI sysfs ROM interface requires an enabling write to access the ROM
image, but the default file mode is 0400.  The original proposed patch
adding sysfs ROM support was a true read-only interface, with the
enabling bit coming in as a feature request.  I suspect it was simply an
oversight that the file mode didn't get updated to match the API.

Acked-by: Chris Wright <chrisw@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

9 years agox86/PCI: make Broadcom CNB20LE driver EMBEDDED and EXPERIMENTAL
Bjorn Helgaas [Thu, 6 Jan 2011 17:12:30 +0000]
x86/PCI: make Broadcom CNB20LE driver EMBEDDED and EXPERIMENTAL

This functionality is known to be incomplete, so discourage its use in
general-purpose kernels.

The only reason to use this driver is to support PCI hotplug on CNB20LE-
based machines that don't have ACPI, and there are very few such
systems.

Reference: https://bugzilla.redhat.com/show_bug.cgi?id=665109
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

9 years agox86/PCI: don't use native Broadcom CNB20LE driver when ACPI is available
Bjorn Helgaas [Thu, 6 Jan 2011 17:12:24 +0000]
x86/PCI: don't use native Broadcom CNB20LE driver when ACPI is available

The broadcom_bus.c quirk was written (without benefit of documentation)
to support PCI hotplug on an old system that doesn't have ACPI.  As
such, we should only use it when the system doesn't have ACPI.

If the system does have ACPI and we need the host bridge description, we
should get it from the ACPI _CRS method.  On machines older than 2008,
we currently ignore _CRS, but that doesn't mean we should use
broadcom_bus.c.  It means we should either (a) do what we've done in the
past and assume everything in the PCI gap is routed to bus 0 (so hotplug
may not work), or (b) arrange to use _CRS.  This patch does (a).

Reference: https://bugzilla.redhat.com/show_bug.cgi?id=665109
Acked-by: Ira W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

9 years agoPCI/ACPI: Request _OSC control once for each root bridge (v3)
Rafael J. Wysocki [Thu, 6 Jan 2011 23:55:09 +0000]
PCI/ACPI: Request _OSC control once for each root bridge (v3)

Move the evaluation of acpi_pci_osc_control_set() (to request control of
PCI Express native features) into acpi_pci_root_add() to avoid calling
it many times for the same root complex with the same arguments.
Additionally, check if all of the requisite _OSC support bits are set
before calling acpi_pci_osc_control_set() for a given root complex.

References: https://bugzilla.kernel.org/show_bug.cgi?id=20232
Reported-by: Ozan Caglayan <ozan@pardus.org.tr>
Tested-by: Ozan Caglayan <ozan@pardus.org.tr>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

9 years agoPCI: enable pci=bfsort by default on future Dell systems
Narendra_K@Dell.com [Tue, 14 Dec 2010 17:57:12 +0000]
PCI: enable pci=bfsort by default on future Dell systems

This patch enables pci=bfsort by default on future Dell systems.
It reads SMBIOS type 0xB1 vendor specific record and sets pci=bfsort
accordingly.

Offset  Name    Length  Value   Description

04      Flags0  Word    Varies  Bits 9-10
                                - 10:9 = 00  Unknown
                                - 10:9 = 01  Breadth First
                                - 10:9 = 10  Depth First
                                - 10:9 = 11  Reserved

1. Any time pci=bfsort has to be enabled on a system, we need to add the
   model number of the system to the white list. With this patch, that
   is not required.

2. Typically, model number has to be added to the white list when the
   system is under development. With this change, that is not required.

Signed-off-by: Jordan Hargrave <jordan_hargrave@dell.com>
Signed-off-by: Narendra K <narendra_k@dell.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

9 years agoMerge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6
Linus Torvalds [Fri, 14 Jan 2011 16:47:26 +0000]
Merge branch 'for-linus' of git://git390.marist.edu/linux-2.6

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
  [S390] MAINTAINERS: Update zcrypt driver entry
  [S390] Randomize PIEs
  [S390] Randomise the brk region
  [S390] Add is_32bit_task() helper function
  [S390] Randomize lower bits of stack address
  [S390] Randomize mmap start address
  [S390] Rearrange mmap.c
  [S390] Enable flexible mmap layout for 64 bit processes
  [S390] vdso: dont map at mmap_base
  [S390] reduce miminum gap between stack and mmap_base
  [S390] mmap: consider stack address randomization
  [S390] Update default configuration
  [S390] cio: path_event overindication after resume

9 years agodrm/i915/lvds: Add AOpen i915GMm-HFS to the list of false-positive LVDS
Knut Petersen [Fri, 14 Jan 2011 15:38:10 +0000]
drm/i915/lvds: Add AOpen i915GMm-HFS to the list of false-positive LVDS

Signed-off-by: Knut Petersen <knut_petersen@t-online.de>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org

9 years agoagp/intel: Fix device names of i845 and 845G
Oswald Buddenhagen [Sat, 19 Jun 2010 21:08:37 +0000]
agp/intel: Fix device names of i845 and 845G

They got mixed up when the switch was converted to a table in 2007.

Signed-off-by: Oswald Buddenhagen <ossi@kde.org>
[ickle: minor changes for 2.6.37+]
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

9 years agotracing: Only process module tracepoints once
Steven Rostedt [Fri, 14 Jan 2011 16:25:58 +0000]
tracing: Only process module tracepoints once

The commit:

 9f987b3141f086de27832514aad9f50a53f754
 tracing: Include module.h in define_trace.h

only solved half the problem. If the trace/events/module.h header is
included at the time of define_trace.h (or in ftrace.h within it),
the module.h TRACE_SYSTEM will override the current TRACE_SYSTEM
macro.

Since define_trace.h is included when CREATE_TRACE_POINTS is set,
and the first thing it does is to #undef CREATE_TRACE_POINTS,
by placing the module.h TRACE_SYSTEM inside a
 #ifdef CREATE_TRACE_POINTS
we can prevent it from overriding the TRACE_SYSTEM that is
being processed, and still process the module.h tracepoints
when the module code defines CREATE_TRACE_POINTS and includes
the trace/events/module.h header.

As with commit 9f987b3141, this is only an issue if module.h
is not included before the trace/events/<event>.h file is
included, which (luckily) has not happened yet.

Reported-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

9 years agoARM: pxa: fix suspend/resume array index miscalculation
Marek Vasut [Mon, 10 Jan 2011 22:53:12 +0000]
ARM: pxa: fix suspend/resume array index miscalculation

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

9 years agoARM: pxa: use cpu_has_ipr() consistently in irq.c
Marek Vasut [Sun, 9 Jan 2011 23:29:04 +0000]
ARM: pxa: use cpu_has_ipr() consistently in irq.c

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

9 years agoARM: pxa: remove unused variable in clock-pxa3xx.c
Marek Vasut [Sun, 9 Jan 2011 23:29:03 +0000]
ARM: pxa: remove unused variable in clock-pxa3xx.c

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>