8 years agoomap2+: Use dmtimer macros for clocksource
Tony Lindgren [Tue, 29 Mar 2011 22:54:49 +0000]
omap2+: Use dmtimer macros for clocksource

Use dmtimer macros for clocksource. As with the clockevent,
this allows us to initialize the rest of dmtimer code later on.

Note that eventually we will be initializing the timesource
from init_early so sched_clock will work properly for
CONFIG_PRINTK_TIME.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>

8 years agoomap2+: Reserve clocksource and timesource and initialize dmtimer later
Tony Lindgren [Tue, 29 Mar 2011 22:54:49 +0000]
omap2+: Reserve clocksource and timesource and initialize dmtimer later

There's no need to initialize the dmtimer framework early.
Just mark the clocksource and timesource as reserved, and
initialize dmtimer with an arch_initcall.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>

8 years agoomap2+: Remove gptimer_wakeup for now
Tony Lindgren [Tue, 29 Mar 2011 22:54:49 +0000]
omap2+: Remove gptimer_wakeup for now

This removes the support for setting the wake-up timer for debugging.

Later on we can reserve gptimer1 for PM code only and have similar
functionality.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>

8 years agoomap2+: Use dmtimer macros for clockevent
Tony Lindgren [Tue, 29 Mar 2011 22:54:48 +0000]
omap2+: Use dmtimer macros for clockevent

This patch makes timer-gp.c to use only a subset of dmtimer
functions without the need to initialize dmtimer code early.

Also note that now with the inline functions, timer_set_next_event
becomes more efficient in the lines of assembly code.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>

8 years agoomap: Make a subset of dmtimer functions into inline functions
Tony Lindgren [Tue, 29 Mar 2011 22:54:48 +0000]
omap: Make a subset of dmtimer functions into inline functions

This will allow us to share the code between system timer and
dmtimer device driver code without having to initialize all the
dmtimers early. This change will also make the timer_set_next_event
more efficient as the inline functions will optimize the code
better for the timer reprogramming.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>

8 years agoomap: Move dmtimer defines to dmtimer.h
Tony Lindgren [Tue, 29 Mar 2011 22:54:48 +0000]
omap: Move dmtimer defines to dmtimer.h

These will be needed when dmtimer platform init code gets split
for omap1 and omap2+. These will also be needed for separate
sys_timer init and driver init for the rest of the hardware timers
in the following patches. No functional changes.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>

8 years agoomap: Set separate timer init functions to avoid cpu_is_omap tests
Tony Lindgren [Tue, 29 Mar 2011 22:54:48 +0000]
omap: Set separate timer init functions to avoid cpu_is_omap tests

This is needed for the following patches so we can initialize the
rest of the hardware timers later on.

As with the init_irq calls, there's no need to do cpu_is_omap calls
during the timer init as we only care about the major omap generation.
This means that we can initialize the sys_timer with the .timer
entries alone.

Note that for now we just set stubs for the various sys_timer entries
that will get populated in a later patch. The following patches will
also remove the omap_dm_timer_init calls and change the init for the
rest of the hardware timers to happen with an arch_initcall.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>

8 years agoomap: Use separate init_irq functions to avoid cpu_is_omap tests early
Tony Lindgren [Tue, 17 May 2011 10:51:26 +0000]
omap: Use separate init_irq functions to avoid cpu_is_omap tests early

This allows us to remove cpu_is_omap calls from init_irq functions.
There should not be any need for cpu_is_omap calls as at this point.
During the timer init we only care about SoC generation, and not about
subrevisions.

The main reason for the patch is that we want to initialize only
minimal omap specific code from the init_early call.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>

8 years agoLinux 3.0-rc3
Linus Torvalds [Mon, 13 Jun 2011 22:29:59 +0000]
Linux 3.0-rc3

8 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg...
Linus Torvalds [Mon, 13 Jun 2011 20:00:53 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/penberg/slab-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6:
  SLAB: Record actual last user of freed objects.
  slub: always align cpu_slab to honor cmpxchg_double requirement

8 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph...
Linus Torvalds [Mon, 13 Jun 2011 18:21:50 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/sage/ceph-client

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  ceph: unwind canceled flock state
  ceph: fix ENOENT logic in striped_read
  ceph: fix short sync reads from the OSD
  ceph: fix sync vs canceled write
  ceph: use ihold when we already have an inode ref

8 years agoMerge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Mon, 13 Jun 2011 17:47:04 +0000]
Merge branch 'timers-urgent-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  rtc: Staticize non-exported __rtc_set_alarm()
  rtc: Fix ioctl error path return
  ptp: Fix some locking bugs in ptp_read()
  ptp: Return -EFAULT on copy_to_user() errors

8 years agoMerge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Mon, 13 Jun 2011 17:45:49 +0000]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  ftrace: Revert 8ab2b7efd ftrace: Remove unnecessary disabling of irqs
  kprobes/trace: Fix kprobe selftest for gcc 4.6
  ftrace: Fix possible undefined return code
  oprofile, dcookies: Fix possible circular locking dependency
  oprofile: Fix locking dependency in sync_start()
  oprofile: Free potentially owned tasks in case of errors
  oprofile, x86: Add comments to IBS LVT offset initialization

8 years agoMerge branches 'x86-urgent-for-linus' and 'irq-urgent-for-linus' of git://git.kernel...
Linus Torvalds [Mon, 13 Jun 2011 17:45:10 +0000]
Merge branches 'x86-urgent-for-linus' and 'irq-urgent-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: devicetree: Add missing early_init_dt_setup_initrd_arch stub
  x86: cpu-hotplug: Prevent softirq wakeup on wrong CPU

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  genirq: Prevent potential NULL dereference in irq_set_irq_wake()

8 years agoMerge branch 'spi/merge' of git://git.secretlab.ca/git/linux-2.6
Linus Torvalds [Mon, 13 Jun 2011 17:33:31 +0000]
Merge branch 'spi/merge' of git://git.secretlab.ca/git/linux-2.6

* 'spi/merge' of git://git.secretlab.ca/git/linux-2.6:
  spi-pl022: Add missing return value update

8 years agoMerge branch 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Mon, 13 Jun 2011 17:32:53 +0000]
Merge branch 's5p-fixes-for-linus' of git://git./linux/kernel/git/kgene/linux-samsung

* 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: S3C2410: remove the now empty mach-s3c2410/irq.c
  ARM: S3C24XX: Move s3c24xx_irq_syscore_ops to plat-s3c24xx/irq.c
  ARM: S3C24xx: Fix missing struct for s3c2410_dma_chan
  ARM: SAMSUNG: Remove unused onenand plat functions
  ARM: EXYNOS4: Remove compiler warning on exynos4_pwm4_resume
  ARM: S5P: Fix compilation error for exynos4_defconfig
  ARM: S5P: Should be S3C_VA_USB_HSPHY instead of S5P_VA_XX
  ARM: S5P64X0: Fix SPI platform device name
  ARM: S5PV210: Fix possible null pointer dereference

8 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke...
Linus Torvalds [Mon, 13 Jun 2011 17:32:24 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/ryusuke/nilfs2

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2:
  nilfs2: fix problem in setting checkpoint interval
  nilfs2: fix missing block address termination in btree node shrinking
  nilfs2: fix incorrect block address termination in node concatenation

8 years agospi-pl022: Add missing return value update
Virupax Sadashivpetimath [Mon, 13 Jun 2011 10:53:46 +0000]
spi-pl022: Add missing return value update

Return error on out of range cpsdvsr value.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

8 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs...
Linus Torvalds [Sun, 12 Jun 2011 18:06:36 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/mason/btrfs-unstable

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
  Btrfs: use join_transaction in btrfs_evict_inode()
  Btrfs - use %pU to print fsid
  Btrfs: fix extent state leak on failed nodatasum reads
  btrfs: fix unlocked access of delalloc_inodes
  Btrfs: avoid stack bloat in btrfs_ioctl_fs_info()
  btrfs: remove 64bit alignment padding to allow extent_buffer to fit into one fewer cacheline
  Btrfs: clear current->journal_info on async transaction commit
  Btrfs: make sure to recheck for bitmaps in clusters
  btrfs: remove unneeded includes from scrub.c
  btrfs: reinitialize scrub workers
  btrfs: scrub: errors in tree enumeration
  Btrfs: don't map extent buffer if path->skip_locking is set
  Btrfs: unlock the trans lock properly
  Btrfs: don't map extent buffer if path->skip_locking is set
  Btrfs: fix duplicate checking logic
  Btrfs: fix the allocator loop logic
  Btrfs: fix bitmap regression
  Btrfs: don't commit the transaction if we dont have enough pinned bytes
  Btrfs: noinline the cluster searching functions
  Btrfs: cache bitmaps when searching for a cluster

8 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
Linus Torvalds [Sun, 12 Jun 2011 18:04:25 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: hda: Fix inaudible internal speakers on CyberpowerPC Gamer Xplorer N57001 laptop
  ALSA: Use %pV for snd_printk()
  ALSA: hda - Fix initialization of hp pins with master_mute in Realtek
  ALSA: hda - Fix invalid unsol tag for some alc262 model quirks
  ASoC: SAMSUNG: Fix the incorrect referencing of I2SCON register
  ASoC: snd_soc_new_{mixer,mux,pga} make sure to use right DAPM context
  ASoC: fsl: fix initialization of DMA buffers
  ASoC: WM8804 does not support sample rates below 32kHz
  ASoC: Fix WM8962 headphone volume update for use of advanced caches
  ASoC: Blackfin: bf5xx-ad1836: Fix codec device name
  ALSA: hda: Fix quirk for Dell Inspiron 910
  ASoC: AD1836: Fix setting the PCM format
  ASoC: Check for NULL register bank in snd_soc_get_cache_val()
  ASoC: Add missing break in WM8915 FLL source selection
  ASoC: Only update SYSCLK_ENA when pausing WM8915 SYSCLK
  ASoC: atmel_ssc: Don't try to free ssc if request failed

8 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6
Linus Torvalds [Sun, 12 Jun 2011 18:04:11 +0000]
Merge git://git./linux/kernel/git/davem/ide-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6:
  ide-cd: signedness warning fix again

8 years agoMerge branch 'gpio/merge' of git://git.secretlab.ca/git/linux-2.6
Linus Torvalds [Sun, 12 Jun 2011 18:03:29 +0000]
Merge branch 'gpio/merge' of git://git.secretlab.ca/git/linux-2.6

* 'gpio/merge' of git://git.secretlab.ca/git/linux-2.6:
  gpio/basic_mmio: add missing include of spinlock_types.h
  gpio/nomadik: fix sleepmode for elder Nomadik

8 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Sun, 12 Jun 2011 18:03:08 +0000]
Merge git://git./linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (55 commits)
  ISDN, hfcsusb: Don't leak in hfcsusb_ph_info()
  netpoll: call dev_put() on error in netpoll_setup()
  net: ep93xx_eth: fix DMA API violations
  net: ep93xx_eth: drop GFP_DMA from call to dma_alloc_coherent()
  net: ep93xx_eth: allocate buffers using kmalloc()
  net: ep93xx_eth: pass struct device to DMA API functions
  ep93xx: set DMA masks for the ep93xx_eth
  vlan: Fix the ingress VLAN_FLAG_REORDER_HDR check
  dl2k: EEPROM CRC calculation wrong endianess on bigendian machine
  NET: am79c961: fix assembler warnings
  NET: am79c961: ensure multicast filter is correctly set at open
  NET: am79c961: ensure asm() statements are marked volatile
  ethtool.h: fix typos
  ep93xx_eth: Update MAINTAINERS
  ipv4: Fix packet size calculation for raw IPsec packets in __ip_append_data
  netpoll: prevent netpoll setup on slave devices
  net: pmtu_expires fixes
  gianfar:localized filer table
  iwlegacy: fix channel switch locking
  mac80211: fix IBSS teardown race
  ...

8 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris...
Linus Torvalds [Sun, 12 Jun 2011 02:56:25 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
  AppArmor: Fix sleep in invalid context from task_setrlimit

8 years agoISDN, hfcsusb: Don't leak in hfcsusb_ph_info()
Jesper Juhl [Sat, 11 Jun 2011 06:36:42 +0000]
ISDN, hfcsusb: Don't leak in hfcsusb_ph_info()

We leak the memory allocated to 'phi' when the variable goes out of scope
in hfcsusb_ph_info().

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonetpoll: call dev_put() on error in netpoll_setup()
Dan Carpenter [Sun, 12 Jun 2011 01:55:22 +0000]
netpoll: call dev_put() on error in netpoll_setup()

There is a dev_put(ndev) missing on an error path.  This was
introduced in 0c1ad04aecb "netpoll: prevent netpoll setup on slave
devices".

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet: ep93xx_eth: fix DMA API violations
Mika Westerberg [Sat, 11 Jun 2011 08:39:58 +0000]
net: ep93xx_eth: fix DMA API violations

Russell King said:
>
> So, to summarize what its doing:
>
> 1. It allocates buffers for rx and tx.
> 2. It maps them with dma_map_single().
>       This transfers ownership of the buffer to the DMA device.
> 3. In ep93xx_xmit,
> 3a. It copies the data into the buffer with skb_copy_and_csum_dev()
>       This violates the DMA buffer ownership rules - the CPU should
>       not be writing to this buffer while it is (in principle) owned
>       by the DMA device.
> 3b. It then calls dma_sync_single_for_cpu() for the buffer.
>       This transfers ownership of the buffer to the CPU, which surely
>       is the wrong direction.
> 4. In ep93xx_rx,
> 4a. It calls dma_sync_single_for_cpu() for the buffer.
>       This at least transfers the DMA buffer ownership to the CPU
>       before the CPU reads the buffer
> 4b. It then uses skb_copy_to_linear_data() to copy the data out.
>       At no point does it transfer ownership back to the DMA device.
> 5. When the driver is removed, it dma_unmap_single()'s the buffer.
>       This transfers ownership of the buffer to the CPU.
> 6. It frees the buffer.
>
> While it may work on ep93xx, it's not respecting the DMA API rules,
> and with DMA debugging enabled it will probably encounter quite a few
> warnings.

This patch fixes these violations.

Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Tested-by: Petr Stetiar <ynezz@true.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet: ep93xx_eth: drop GFP_DMA from call to dma_alloc_coherent()
Mika Westerberg [Sat, 11 Jun 2011 08:39:57 +0000]
net: ep93xx_eth: drop GFP_DMA from call to dma_alloc_coherent()

Commit a197b59ae6e8 (mm: fail GFP_DMA allocations when ZONE_DMA is not
configured) made page allocator to return NULL if GFP_DMA is set but
CONFIG_ZONE_DMA is disabled.

This causes ep93xx_eth to fail:

 WARNING: at mm/page_alloc.c:2251 __alloc_pages_nodemask+0x11c/0x638()
 Modules linked in:
 [<c0035498>] (unwind_backtrace+0x0/0xf4) from [<c0043da4>] (warn_slowpath_common+0x48/0x60)
 [<c0043da4>] (warn_slowpath_common+0x48/0x60) from [<c0043dd8>] (warn_slowpath_null+0x1c/0x24)
 [<c0043dd8>] (warn_slowpath_null+0x1c/0x24) from [<c0083b6c>] (__alloc_pages_nodemask+0x11c/0x638)
 [<c0083b6c>] (__alloc_pages_nodemask+0x11c/0x638) from [<c00366fc>] (__dma_alloc+0x8c/0x3ec)
 [<c00366fc>] (__dma_alloc+0x8c/0x3ec) from [<c0036adc>] (dma_alloc_coherent+0x54/0x60)
 [<c0036adc>] (dma_alloc_coherent+0x54/0x60) from [<c0227808>] (ep93xx_open+0x20/0x864)
 [<c0227808>] (ep93xx_open+0x20/0x864) from [<c0283144>] (__dev_open+0xb8/0x108)
 [<c0283144>] (__dev_open+0xb8/0x108) from [<c0280528>] (__dev_change_flags+0x70/0x128)
 [<c0280528>] (__dev_change_flags+0x70/0x128) from [<c0283054>] (dev_change_flags+0x10/0x48)
 [<c0283054>] (dev_change_flags+0x10/0x48) from [<c001a720>] (ip_auto_config+0x190/0xf68)
 [<c001a720>] (ip_auto_config+0x190/0xf68) from [<c00233b0>] (do_one_initcall+0x34/0x18c)
 [<c00233b0>] (do_one_initcall+0x34/0x18c) from [<c0008400>] (kernel_init+0x94/0x134)
 [<c0008400>] (kernel_init+0x94/0x134) from [<c0030858>] (kernel_thread_exit+0x0/0x8)

Since there is no restrictions for DMA on ep93xx, we can fix this by just
removing the GFP_DMA flag from the call.

Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Tested-by: Petr Stetiar <ynezz@true.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet: ep93xx_eth: allocate buffers using kmalloc()
Mika Westerberg [Sat, 11 Jun 2011 08:39:56 +0000]
net: ep93xx_eth: allocate buffers using kmalloc()

We can use simply kmalloc() to allocate the buffers. This also simplifies the
code and allows us to perform DMA sync operations more easily.

Memory is allocated with only GFP_KERNEL since there are no DMA allocation
restrictions on this platform.

Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Tested-by: Petr Stetiar <ynezz@true.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet: ep93xx_eth: pass struct device to DMA API functions
Mika Westerberg [Sat, 11 Jun 2011 08:39:55 +0000]
net: ep93xx_eth: pass struct device to DMA API functions

We shouldn't use NULL for any DMA API functions, unless we are dealing with
ISA or EISA device. So pass correct struct dev pointer to these functions.

Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoep93xx: set DMA masks for the ep93xx_eth
Mika Westerberg [Sat, 11 Jun 2011 08:39:54 +0000]
ep93xx: set DMA masks for the ep93xx_eth

Since the driver uses the DMA API, we should pass it valid DMA masks.

Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Tested-by: Petr Stetiar <ynezz@true.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agovlan: Fix the ingress VLAN_FLAG_REORDER_HDR check
Jiri Pirko [Fri, 10 Jun 2011 06:56:58 +0000]
vlan: Fix the ingress VLAN_FLAG_REORDER_HDR check

Testing of VLAN_FLAG_REORDER_HDR does not belong in vlan_untag
but rather in vlan_do_receive.  Otherwise the vlan header
will not be properly put on the packet in the case of
vlan header accelleration.

As we remove the check from vlan_check_reorder_header
rename it vlan_reorder_header to keep the naming clean.

Fix up the skb->pkt_type early so we don't look at the packet
after adding the vlan tag, which guarantees we don't goof
and look at the wrong field.

Use a simple if statement instead of a complicated switch
statement to decided that we need to increment rx_stats
for a multicast packet.

Hopefully at somepoint we will just declare the case where
VLAN_FLAG_REORDER_HDR is cleared as unsupported and remove
the code.  Until then this keeps it working correctly.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Acked-by: Changli Gao <xiaosuo@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agodl2k: EEPROM CRC calculation wrong endianess on bigendian machine
Daniel Hellstrom [Fri, 10 Jun 2011 04:55:16 +0000]
dl2k: EEPROM CRC calculation wrong endianess on bigendian machine

Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoNET: am79c961: fix assembler warnings
Russell King - ARM Linux [Fri, 10 Jun 2011 00:52:35 +0000]
NET: am79c961: fix assembler warnings

Fix:
/tmp/ccvoZ6h8.s: Assembler messages:
/tmp/ccvoZ6h8.s:284: Warning: register range not in ascending order
/tmp/ccvoZ6h8.s:881: Warning: register range not in ascending order
/tmp/ccvoZ6h8.s:1087: Warning: register range not in ascending order

by ensuring that we have temporary variables placed into specific
registers.  Reorder the code a bit to allow the resulting assembly
to be slightly more optimal.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoNET: am79c961: ensure multicast filter is correctly set at open
Russell King - ARM Linux [Fri, 10 Jun 2011 00:52:14 +0000]
NET: am79c961: ensure multicast filter is correctly set at open

We were clearing out the multicast filter whenever the interface was
upped, and not setting the mode bits correctly.  This can cause
problems if there are any multicast addresses already set at this
point, or if ALLMULTI was set.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoNET: am79c961: ensure asm() statements are marked volatile
Russell King - ARM Linux [Fri, 10 Jun 2011 00:51:54 +0000]
NET: am79c961: ensure asm() statements are marked volatile

Without this the compiler can (and does) optimize register reads away
from within loops, and other such optimizations.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoide-cd: signedness warning fix again
Connor Hansen [Sat, 11 Jun 2011 22:06:48 +0000]
ide-cd: signedness warning fix again

One of the legit warnings 'make W=3 drivers/ide/ide-cd.c'
generates is:
drivers/ide/ide-cd.c: In function ide_cd_do_request
drivers/ide/ide-cd.c:828:2: warning: conversion to int from \
unsigned int may change the sign of the result
drivers/ide/ide-cd.c:833:2: warning: conversion to int from \
unsigned int may change the sign of the result

nsectors is declared int, should be unsigned int.

blk_rq_sectors() returns unsigned int, and ide_complete_rq
expects unsigned int as well.  Fixes both warnings.

Signed-off-by: Connor Hansen <cmdkhh@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agolinux/seqlock.h should #include asm/processor.h for cpu_relax()
David Howells [Sat, 11 Jun 2011 11:29:58 +0000]
linux/seqlock.h should #include asm/processor.h for cpu_relax()

It uses cpu_relax(), and so needs <asm/processor.h>

Without this patch, I see:

CC arch/mn10300/kernel/asm-offsets.s
  In file included from include/linux/time.h:8,
                   from include/linux/timex.h:56,
                   from include/linux/sched.h:57,
                   from arch/mn10300/kernel/asm-offsets.c:7:
  include/linux/seqlock.h: In function 'read_seqbegin':
  include/linux/seqlock.h:91: error: implicit declaration of function 'cpu_relax'

whilst building asb2364_defconfig on MN10300.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoBtrfs: use join_transaction in btrfs_evict_inode()
Li Zefan [Wed, 8 Jun 2011 03:56:44 +0000]
Btrfs: use join_transaction in btrfs_evict_inode()

The WARN_ON() in start_transaction() was triggered while balancing.

The cause is btrfs_relocate_chunk() started a transaction and
then called iput() on the inode that stores free space cache,
and iput() called btrfs_start_transaction() again.

Reported-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Reviewed-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

8 years agonilfs2: fix problem in setting checkpoint interval
Ryusuke Konishi [Thu, 9 Jun 2011 15:33:06 +0000]
nilfs2: fix problem in setting checkpoint interval

Checkpoint generation interval of nilfs goes wrong after user has
changed the interval parameter with nilfs-tune tool.

 segctord starting. Construction interval = 5 seconds,
 CP frequency < 30 seconds
 segctord starting. Construction interval = 0 seconds,
 CP frequency < 30 seconds

This turned out to be caused by a trivial bug in initialization code
of log writer.  This will fix it.

Reported-by: Andrea Gelmini <andrea.gelmini@gmail.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

8 years agonilfs2: fix missing block address termination in btree node shrinking
Ryusuke Konishi [Wed, 25 May 2011 14:00:27 +0000]
nilfs2: fix missing block address termination in btree node shrinking

nilfs_btree_delete function does not terminate part of virtual block
addresses when shrinking the last remaining child node into the root
node.  The missing address termination causes that dead btree node
blocks persist and chip away free disk space.

This fixes the leak bug on the btree node deletion.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

8 years agonilfs2: fix incorrect block address termination in node concatenation
Ryusuke Konishi [Wed, 25 May 2011 14:00:27 +0000]
nilfs2: fix incorrect block address termination in node concatenation

nilfs_btree_delete function wrongly terminates virtual block address
of the btree node held by its parent at index 0.  When concatenating
the index-0 node with its right sibling node, nilfs_btree_delete
terminates the block address of index-0 node instead of the right
sibling node which should be deleted.

This bug not only wears disk space in the long run, but also causes
file system corruption.  This will fix it.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

8 years agoBtrfs - use %pU to print fsid
Ilya Dryomov [Wed, 9 Feb 2011 14:05:31 +0000]
Btrfs - use %pU to print fsid

Get rid of FIXME comment.  Uuids from dmesg are now the same as uuids
given by btrfs-progs.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

8 years agoBtrfs: fix extent state leak on failed nodatasum reads
Jan Schmidt [Wed, 4 May 2011 14:18:50 +0000]
Btrfs: fix extent state leak on failed nodatasum reads

When encountering an EIO while reading from a nodatasum extent, we
insert an error record into the inode's failure tree.
btrfs_readpage_end_io_hook returns early for nodatasum inodes. We'd
better clear the failure tree in that case, otherwise the kernel
complains about

BUG extent_state: Objects remaining on kmem_cache_close()

on rmmod.

Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

8 years agoMerge branch 'for-chris' of git://git.kernel.org/pub/scm/linux/kernel/git/arne/btrfs...
Chris Mason [Fri, 10 Jun 2011 22:58:08 +0000]
Merge branch 'for-chris' of git://git./linux/kernel/git/arne/btrfs-unstable-arne into for-linus

8 years agobtrfs: fix unlocked access of delalloc_inodes
David Sterba [Thu, 9 Jun 2011 10:02:51 +0000]
btrfs: fix unlocked access of delalloc_inodes

list_splice_init will make delalloc_inodes empty, but without a spinlock
around, this may produce corrupted list head, accessed in many placess,
The race window is very tight and nobody seems to have hit it so far.

Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

8 years agoBtrfs: avoid stack bloat in btrfs_ioctl_fs_info()
Li Zefan [Wed, 8 Jun 2011 08:27:56 +0000]
Btrfs: avoid stack bloat in btrfs_ioctl_fs_info()

The size of struct btrfs_ioctl_fs_info_args is as big as 1KB, so
don't declare the variable on stack.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Reviewed-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

8 years agobtrfs: remove 64bit alignment padding to allow extent_buffer to fit into one fewer...
richard kennedy [Tue, 7 Jun 2011 10:46:32 +0000]
btrfs: remove 64bit alignment padding to allow extent_buffer to fit into one fewer cacheline

Reorder extent_buffer to remove 8 bytes of alignment padding on 64 bit
builds. This shrinks its size to 128 bytes allowing it to fit into one
fewer cache lines and allows more objects per slab in its kmem_cache.

slabinfo extent_buffer reports :-

 before:-
    Sizes (bytes)     Slabs
    ----------------------------------
    Object :     136  Total  :     123
    SlabObj:     136  Full   :     121
    SlabSiz:    4096  Partial:       0
    Loss   :       0  CpuSlab:       2
    Align  :       8  Objects:      30

 after :-
    Object :     128  Total  :       4
    SlabObj:     128  Full   :       2
    SlabSiz:    4096  Partial:       0
    Loss   :       0  CpuSlab:       2
    Align  :       8  Objects:      32

Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

8 years agoBtrfs: clear current->journal_info on async transaction commit
Sage Weil [Fri, 10 Jun 2011 18:43:13 +0000]
Btrfs: clear current->journal_info on async transaction commit

Normally current->jouranl_info is cleared by commit_transaction.  For an
async snap or subvol creation, though, it runs in a work queue.  Clear
it in btrfs_commit_transaction_async() to avoid leaking a non-NULL
journal_info when we return to userspace.  When the actual commit runs in
the other thread it won't care that it's current->journal_info is already
NULL.

Signed-off-by: Sage Weil <sage@newdream.net>
Tested-by: Jim Schutt <jaschut@sandia.gov>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

8 years agoBtrfs: make sure to recheck for bitmaps in clusters
Chris Mason [Fri, 10 Jun 2011 20:36:57 +0000]
Btrfs: make sure to recheck for bitmaps in clusters

Josef recently changed the free extent cache to look in
the block group cluster for any bitmaps before trying to
add a new bitmap for the same offset.  This avoids BUG_ON()s due
covering duplicate ranges.

But it didn't go quite far enough.  A given free range might span
between one or more bitmaps or free space entries.  The code has
looping to cover this, but it doesn't check for clustered bitmaps
every time.

This shuffles our gotos to check for a bitmap in the cluster
for every new bitmap entry we try to add.

Signed-off-by: Chris Mason <chris.mason@oracle.com>

8 years agoMerge branch 'fix/asoc' into for-linus
Takashi Iwai [Fri, 10 Jun 2011 15:49:34 +0000]
Merge branch 'fix/asoc' into for-linus

8 years agogpio/basic_mmio: add missing include of spinlock_types.h
Jamie Iles [Fri, 10 Jun 2011 12:44:49 +0000]
gpio/basic_mmio: add missing include of spinlock_types.h

include/linux/basic_mmio_gpio.h uses a spinlock_t without including any
of the spinlock headers resulting in this compiler warning.

include/linux/basic_mmio_gpio.h:51:2: error: expected specifier-qualifier-list before 'spinlock_t'

Explicitly include linux/spinlock_types.h to fix it.

Signed-off-by: Jamie Iles <jamie@jamieiles.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

8 years agoALSA: hda: Fix inaudible internal speakers on CyberpowerPC Gamer Xplorer N57001 laptop
Daniel T Chen [Fri, 10 Jun 2011 14:14:01 +0000]
ALSA: hda: Fix inaudible internal speakers on CyberpowerPC Gamer Xplorer N57001 laptop

BugLink: https://launchpad.net/bugs/761171

The original reporter needs the model=auto quirk for his internal
speakers to be audible in the latest daily snapshot, so add an entry in
the quirk table for his PCI SSID.

A trivially different version of this patch using the model=asus quirk
should be applied to the 2.6.38 and 2.6.39 stable kernels. We don't use
the asus quirk in 3.0-rc2, because 3.0-rc2's autoparser is much
improved.

Reported-and-tested-by: tomdeering7
Signed-off-by: Daniel T Chen <crimsun@ubuntu.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

8 years agoALSA: Use %pV for snd_printk()
Takashi Iwai [Fri, 10 Jun 2011 13:32:31 +0000]
ALSA: Use %pV for snd_printk()

Clean up snd_printk() helper using the %pV prefix for recursive printks.
This also automagically fixes an Oops with RO/NX-enabled modules.

Tested-by: Maarten Lankhorst <m.b.lankhorst@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

8 years agoALSA: hda - Fix initialization of hp pins with master_mute in Realtek
Takashi Iwai [Fri, 10 Jun 2011 13:28:15 +0000]
ALSA: hda - Fix initialization of hp pins with master_mute in Realtek

Some Reatlek model quirks use master_mute bool switch for controlling
the master-mute of outputs.  For these cases, the initialization of HP
pins/amps were forgotten during the transition to the common automute
helper function in 3.0 development time, and resulted in the muted HP
output as default.

This patch fixes the issue by adjusting the HP output explicitly with
master_mute switch.

Tested-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

8 years agoALSA: hda - Fix invalid unsol tag for some alc262 model quirks
Takashi Iwai [Fri, 10 Jun 2011 07:31:54 +0000]
ALSA: hda - Fix invalid unsol tag for some alc262 model quirks

The tag number was forgotten to be fixed after cleaning up the model
quirks for ALC262 fujitsu and lenovo-3000 models.

Tested-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

8 years agobtrfs: remove unneeded includes from scrub.c
Arne Jansen [Fri, 10 Jun 2011 11:04:58 +0000]
btrfs: remove unneeded includes from scrub.c

Signed-off-by: Arne Jansen <sensille@gmx.net>

8 years agobtrfs: reinitialize scrub workers
Arne Jansen [Fri, 10 Jun 2011 10:07:07 +0000]
btrfs: reinitialize scrub workers

Scrub starts the workers each time a scrub starts and stops them after it
finished. This patch adds an initialization for the workers before each
start, otherwise the workers behave strangely.

Signed-off-by: Arne Jansen <sensille@gmx.net>

8 years agobtrfs: scrub: errors in tree enumeration
Arne Jansen [Fri, 3 Jun 2011 08:09:26 +0000]
btrfs: scrub: errors in tree enumeration

due to the semantics of btrfs_search_slot the path can point to an
invalid slot when ret > 0. This condition went unnoticed, which in
turn could have led to an incomplete scrubbing.

Signed-off-by: Arne Jansen <sensille@gmx.net>

8 years agoBtrfs: don't map extent buffer if path->skip_locking is set
Josef Bacik [Wed, 8 Jun 2011 18:45:50 +0000]
Btrfs: don't map extent buffer if path->skip_locking is set

Arne's scrub stuff exposed a problem with mapping the extent buffer in
reada_for_search.  He searches the commit root with multiple threads and with
skip_locking set, so we can race and overwrite node->map_token since node isn't
locked.  So fix this so that we only map the extent buffer if we don't already
have a map_token and skip_locking isn't set.  Without this patch scrub would
panic almost immediately, with the patch it doesn't panic anymore.  Thanks,

Reported-by: Arne Jansen <sensille@gmx.net>
Signed-off-by: Josef Bacik <josef@redhat.com>

8 years agoASoC: SAMSUNG: Fix the incorrect referencing of I2SCON register
Sangbeom Kim [Fri, 10 Jun 2011 01:36:54 +0000]
ASoC: SAMSUNG: Fix the incorrect referencing of I2SCON register

If DMA active status should be checked, I2SCON register should be referenced.
In this patch, Fix the incorrect referencing of I2SCON register.

Reported-by : Lakkyung Jung <lakkyung.jung@samsung.com>
Signed-off-by: Sangbeom Kim <sbkim73@samsung.com>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@kernel.org

8 years agogenirq: Prevent potential NULL dereference in irq_set_irq_wake()
Jesper Juhl [Thu, 9 Jun 2011 21:14:58 +0000]
genirq: Prevent potential NULL dereference in irq_set_irq_wake()

In kernel/irq/manage.c::irq_set_irq_wake() we call
irq_get_desc_buslock() which may return NULL, but the code
dereferences the result unconditionally.

irq_set_irq_wake() has lots of callers - I checked a few and I couldn't
find anything that guarantees that they won't call it with some input that
will cause irq_get_desc_buslock() to return NULL, so I think it's a good
thing to test and -EINVAL was the most sane error code in this situation
that I could think of.

Not all callers test the return value of irq_set_irq_wake(), but those
that do take != 0 to mean error as far as I can see, so they should be
fine. I guess those that don't test actually should, but that's a
different issue.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Link: http://lkml.kernel.org/r/alpine.LNX.2.00.1106092300360.17868@swampdragon.chaosbits.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

8 years agoMerge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzi...
Linus Torvalds [Fri, 10 Jun 2011 03:14:21 +0000]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/jgarzik/libata-dev

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  libata: fix unexpectedly frozen port after ata_eh_reset()

8 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6
Linus Torvalds [Thu, 9 Jun 2011 23:33:01 +0000]
Merge git://git./linux/kernel/git/davem/sparc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc32, leon: bugfix in LEON SMP interrupt init
  sparc32, sun4m: bugfix in SMP IPI traphandler
  sparc: Remove unnecessary semicolons
  Add support for allocating irqs for bootbus devices
  Do not skip interrupt sources in sun4d interrupt handler and acknowledge interrupts correctly
  Restructure sun4d_build_device_irq so that timer interrupts can be allocated
  sparc: PCIC_PCI needs SPARC32 dependency
  sparc: Do not select GENERIC_HARDIRQS_NO_DEPRECATED
  sparc32,leon: add GRPCI2 PCI Host driver
  sparc32,leon: added LEON-common low-level PCI routines
  sparc32: added CONFIG_PCIC_PCI Kconfig setting

8 years agoMerge branch 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuil...
Linus Torvalds [Thu, 9 Jun 2011 23:27:42 +0000]
Merge branch 'rc-fixes' of git://git./linux/kernel/git/mmarek/kbuild-2.6

* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
  perf: Use make kernelversion instead of parsing the Makefile
  kbuild: Hack for depmod not handling X.Y versions
  kbuild: Move depmod call to a separate script
  kbuild: Fix <linux/version.h> for empty SUBLEVEL or PATCHLEVEL
  kbuild: Fix KERNELVERSION for empty SUBLEVEL or PATCHLEVEL
  kbuild: silence Nothing to be done for 'all' message

8 years agosparc32, leon: bugfix in LEON SMP interrupt init
Daniel Hellstrom [Thu, 9 Jun 2011 02:54:09 +0000]
sparc32, leon: bugfix in LEON SMP interrupt init

During converting per-cpu ticker to genirq layer some
IRQ initialization code was removed by commit
2cf9530420e446bb61f665d02afeb81070106900 ("sparc32,leon:
per-cpu ticker use genirq per-cpu handler").

This patch reintroduces the code at the same place it was
removed from. IRQ12 - IRQ14 will crash on LEON SMP without
this patch because it will run the SUN4M IRQ trap handler.

Reported-by: Jan Andersson <jan@gaisler.com>
Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agosparc32, sun4m: bugfix in SMP IPI traphandler
Daniel Hellstrom [Thu, 9 Jun 2011 02:54:08 +0000]
sparc32, sun4m: bugfix in SMP IPI traphandler

Three new IPIs were introduced by commit
ecbc42b70acbc6327adefe9635db93fcf62bf59d ("sparc32, sun4m:
Implemented SMP IPIs support for SUN4M machines"), the
old handler was already prepared for IPIs but handled only
IRQ14 and IRQ13, this patch adds support for the new IPI at
IRQ12.

The IPI trap handler looks at the mask rather than the
pending IRQ/IPI, this bug may have masked the problem
above, introduced by the same commit.

Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoethtool.h: fix typos
Yegor Yefremov [Thu, 9 Jun 2011 22:05:48 +0000]
ethtool.h: fix typos

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoep93xx_eth: Update MAINTAINERS
H Hartley Sweeten [Thu, 9 Jun 2011 22:00:21 +0000]
ep93xx_eth: Update MAINTAINERS

Lennert stated that he has been short on time lately. Since I'm maintaining
the ep93xx core stuff, I'm willing to also take over maintaining the Ethernet
driver.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Mika Westerberg <mika.westerberg@iki.fi>
Acked-by: Lennert Buytenhek <kernel@wantstofly.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoipv4: Fix packet size calculation for raw IPsec packets in __ip_append_data
Steffen Klassert [Sun, 5 Jun 2011 20:48:47 +0000]
ipv4: Fix packet size calculation for raw IPsec packets in __ip_append_data

We assume that transhdrlen is positive on the first fragment
which is wrong for raw packets. So we don't add exthdrlen to the
packet size for raw packets. This leads to a reallocation on IPsec
because we have not enough headroom on the skb to place the IPsec
headers. This patch fixes this by adding exthdrlen to the packet
size whenever the send queue of the socket is empty. This issue was
introduced with git commit 1470ddf7 (inet: Remove explicit write
references to sk/inet in ip_append_data)

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoperf: Use make kernelversion instead of parsing the Makefile
Michal Marek [Mon, 30 May 2011 12:12:09 +0000]
perf: Use make kernelversion instead of parsing the Makefile

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Michal Marek <mmarek@suse.cz>

8 years agokbuild: Hack for depmod not handling X.Y versions
Michal Marek [Thu, 9 Jun 2011 14:35:41 +0000]
kbuild: Hack for depmod not handling X.Y versions

depmod from module-init-tools < 3.13 and the busybox depmod check if the
kernel release starts with <num>.<num>.<num>. To support these versions,
we create a symlink with two numbers prepended.

Signed-off-by: Michal Marek <mmarek@suse.cz>

8 years agokbuild: Move depmod call to a separate script
Michal Marek [Thu, 9 Jun 2011 13:35:22 +0000]
kbuild: Move depmod call to a separate script

Do not bloat the Makefile with multiline shell statements. No
user-visible change intended.

Signed-off-by: Michal Marek <mmarek@suse.cz>

8 years agokbuild: Fix <linux/version.h> for empty SUBLEVEL or PATCHLEVEL
Michal Marek [Mon, 30 May 2011 11:37:20 +0000]
kbuild: Fix <linux/version.h> for empty SUBLEVEL or PATCHLEVEL

expr treats all numbers as decimals, so prepending a zero is safe. Note
that the KERNEL_VERSION() macro still takes three arguments, 3.0 has to be
written as KERNEL_VERSION(3,0,0).

Signed-off-by: Michal Marek <mmarek@suse.cz>

8 years agokbuild: Fix KERNELVERSION for empty SUBLEVEL or PATCHLEVEL
Michal Marek [Mon, 30 May 2011 11:36:07 +0000]
kbuild: Fix KERNELVERSION for empty SUBLEVEL or PATCHLEVEL

Omit the second dot for releases without SUBLEVEL. If PATCHLEVEL is also
empty, only display VERSION.

Signed-off-by: Michal Marek <mmarek@suse.cz>

8 years agogpio/nomadik: fix sleepmode for elder Nomadik
Linus Walleij [Thu, 9 Jun 2011 09:08:47 +0000]
gpio/nomadik: fix sleepmode for elder Nomadik

The mach-nomadik machine did not compile properly due to bad
ux500-specific functions being called. Introduce new state
variables to fix this up.

Reported-by: Axel Lin <axel.lin@gmail.com>
Cc: Alessandro Rubini <rubini@unipv.it>
Cc: Prafulla Wadaskar <prafulla.wadaskar@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

8 years agoMerge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Linus Torvalds [Thu, 9 Jun 2011 20:50:25 +0000]
Merge branch 'merge' of git://git./linux/kernel/git/benh/powerpc

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc: Force page alignment for initrd reserved memory
  dtc/powerpc: remove obsolete .gitignore entries
  powerpc/85xx: fix race bug of calling request_irq after enable elbc interrupts
  powerpc/book3e: Fix CPU feature handling on e5500 in 32-bit mode
  powerpc/fsl_rio: Fix compile error when CONFIG_FSL_RIO not set

8 years agoMerge branch 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh...
Linus Torvalds [Thu, 9 Jun 2011 20:09:07 +0000]
Merge branch 'staging-linus' of git://git./linux/kernel/git/gregkh/staging-2.6

* 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6:
  staging: iio: max517: Fix iio_info changes
  Staging: mei: fix debug code
  Staging: cx23885: fix include of altera.h
  staging: iio: error case memory leak fix
  staging: ath6kl: Fix a kernel panic during suspend/resume
  staging: gma500: get control from firmware framebuffer if conflicts
  staging: gma500: Skip bogus LVDS VBT mode and check for LVDS before adding backlight
  staging: usbip: bugfix prevent driver unbind
  staging: iio: industrialio-trigger: set iio_poll_func private_data
  staging: rts_pstor: use bitwise operator instead of logical one
  staging: fix ath6kl build when CFG80211 is not enabled
  staging: brcm80211: fix for 'multiple definition of wl_msg_level' build err
  staging: fix olpc_dcon build, needs BACKLIGHT_CLASS_DEVICE
  Staging: remove STAGING_EXCLUDE_BUILD option
  Staging: altera: move .h file to proper place

8 years agoMerge branch 'stable/xen-swiotlb.bugfix' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Thu, 9 Jun 2011 19:52:44 +0000]
Merge branch 'stable/xen-swiotlb.bugfix' of git://git./linux/kernel/git/konrad/swiotlb-2.6

* 'stable/xen-swiotlb.bugfix' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb-2.6:
  swiotlb: Export swioltb_nr_tbl and utilize it as appropiate.

8 years agoMerge branch 'stable/broadcom.ibft-bugfixes' of git://git.kernel.org/pub/scm/linux...
Linus Torvalds [Thu, 9 Jun 2011 19:52:30 +0000]
Merge branch 'stable/broadcom.ibft-bugfixes' of git://git./linux/kernel/git/konrad/ibft-2.6

* 'stable/broadcom.ibft-bugfixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft-2.6:
  iscsi_ibft: iscsi_ibft_find unused variable i

8 years agoMerge branch 'unicore32' of git://git.kernel.org/pub/scm/linux/kernel/git/epip/linux...
Linus Torvalds [Thu, 9 Jun 2011 19:52:05 +0000]
Merge branch 'unicore32' of git://git./linux/kernel/git/epip/linux-2.6-unicore32

* 'unicore32' of git://git.kernel.org/pub/scm/linux/kernel/git/epip/linux-2.6-unicore32:
  unicore32: using generic-y format for one line asm-generic files
  unicore32: change PERCPU to PERCPU_SECTION
  unicore32: add KBUILD_DEFCONFIG with unicore32_defconfig (old debug_defconfig)
  unicore32: change zImage physical address, though it's PIC codes
  unicore32: move rtc-puv3.c to drivers/rtc directory

8 years agovsprintf: Update %pI6c to not compress a single 0
Joe Perches [Thu, 9 Jun 2011 18:23:37 +0000]
vsprintf: Update %pI6c to not compress a single 0

RFC 5952 (http://tools.ietf.org/html/rfc5952) mandates that 2 or more
consecutive 0's are required before using :: compression.

Update ip6_compressed_string to match the RFC and update the http
reference as well.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoexec: delay address limit change until point of no return
Mathias Krause [Thu, 9 Jun 2011 18:05:18 +0000]
exec: delay address limit change until point of no return

Unconditionally changing the address limit to USER_DS and not restoring
it to its old value in the error path is wrong because it prevents us
using kernel memory on repeated calls to this function.  This, in fact,
breaks the fallback of hard coded paths to the init program from being
ever successful if the first candidate fails to load.

With this patch applied switching to USER_DS is delayed until the point
of no return is reached which makes it possible to have a multi-arch
rootfs with one arch specific init binary for each of the (hard coded)
probed paths.

Since the address limit is already set to USER_DS when start_thread()
will be invoked, this redundancy can be safely removed.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirel...
John W. Linville [Thu, 9 Jun 2011 18:23:30 +0000]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless-2.6 into for-davem

8 years agostaging: iio: max517: Fix iio_info changes
Roland Stigge [Thu, 9 Jun 2011 14:21:00 +0000]
staging: iio: max517: Fix iio_info changes

struct iio_info introduced a bug where the second channel of a MAX518 can't be
used. This commit fixes the typo (using max518 instead of the max517 struct).

Signed-off-by: Roland Stigge <stigge@antcom.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agoStaging: mei: fix debug code
Dan Carpenter [Thu, 9 Jun 2011 07:18:23 +0000]
Staging: mei: fix debug code

! has higher precedence than !=.  H_RDY is 8 and since neither 0 nor
1 are equal to 8 the original condition was always true.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agoBtrfs: unlock the trans lock properly
Josef Bacik [Thu, 9 Jun 2011 14:15:17 +0000]
Btrfs: unlock the trans lock properly

In btrfs_wait_for_commit if we came upon a transaction that had committed we
just exited, but that's bad since we are holding the trans_lock.  So break
instead so that the lock is dropped.  Thanks,

Reported-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Josef Bacik <josef@redhat.com>

8 years agoBtrfs: don't map extent buffer if path->skip_locking is set
Josef Bacik [Wed, 8 Jun 2011 18:36:54 +0000]
Btrfs: don't map extent buffer if path->skip_locking is set

Arne's scrub stuff exposed a problem with mapping the extent buffer in
reada_for_search.  He searches the commit root with multiple threads and with
skip_locking set, so we can race and overwrite node->map_token since node isn't
locked.  So fix this so that we only map the extent buffer if we don't already
have a map_token and skip_locking isn't set.  Without this patch scrub would
panic almost immediately, with the patch it doesn't panic anymore.  Thanks,

Reported-by: Arne Jansen <sensille@gmx.net>
Signed-off-by: Josef Bacik <josef@redhat.com>

8 years agoASoC: snd_soc_new_{mixer,mux,pga} make sure to use right DAPM context
Lars-Peter Clausen [Thu, 9 Jun 2011 11:22:36 +0000]
ASoC: snd_soc_new_{mixer,mux,pga} make sure to use right DAPM context

Currently it is possible that snd_soc_new_{mixer,mux,pga} is called with a
DAPM context not matching the widgets context. This can lead to a wrong
prefix_len calculation, which will result in undefined behaviour. To avoid
this always use the DAPM context from the widget itself.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@kernel.org

8 years agox86: devicetree: Add missing early_init_dt_setup_initrd_arch stub
Florian Fainelli [Mon, 6 Jun 2011 08:15:49 +0000]
x86: devicetree: Add missing early_init_dt_setup_initrd_arch stub

This patch fixes the following build failure:

drivers/built-in.o: In function `early_init_dt_check_for_initrd':
/home/florian/dev/kernel/x86/linux-2.6-x86/drivers/of/fdt.c:571:
undefined reference to `early_init_dt_setup_initrd_arch'
make: *** [.tmp_vmlinux1] Error 1

which happens as soon as we enable initrd support on a x86 devicetree
platform such as Intel CE4100.

Signed-off-by: Florian Fainelli <ffainelli@freebox.fr>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Maxime Bizon <mbizon@freebox.fr>
Acked-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Cc: stable@kernel.org # 2.6.39
Link: http://lkml.kernel.org/r/201106061015.50039.ffainelli@freebox.fr
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

8 years agoiscsi_ibft: iscsi_ibft_find unused variable i
Connor Hansen [Sun, 5 Jun 2011 10:35:09 +0000]
iscsi_ibft: iscsi_ibft_find unused variable i

int i is only needed if CONFIG_ACPI is set
so move it within a new ifdef so kernels without ACPI
don't allocate space for nothing. Fixes warning too.

Signed-off-by: Connor Hansen <cmdkhh@gmail.com>
Signed-off-by: Peter Jones <pjones@redhat.com>
[v2: Fixed warning when CONFIG_ACPI was defined]
Signed-off-by: Konrad Rzeszutek Wilk <konrad@kernel.org>

8 years agoASoC: fsl: fix initialization of DMA buffers
Timur Tabi [Wed, 8 Jun 2011 20:02:56 +0000]
ASoC: fsl: fix initialization of DMA buffers

The DMA (PCM) driver used by some Freescale PowerPC supports separate DAIs
for playback and capture, so DMA buffers should be allocated only for the
initialized streams.  Instead of checking for the number of active channels,
which apparently is not reliable, check to see if the actual stream object
exists.

Also provide a better name for the DMA interrupt.

Signed-off-by: Timur Tabi <timur@freescale.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

8 years agoASoC: WM8804 does not support sample rates below 32kHz
Mark Brown [Wed, 8 Jun 2011 17:07:49 +0000]
ASoC: WM8804 does not support sample rates below 32kHz

Reported-by: Kieran O'Leary <Kieran.O'Leary@wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Cc: stable@kernel.org

8 years agokbuild: silence Nothing to be done for 'all' message
Peter Foley [Thu, 9 Jun 2011 00:58:32 +0000]
kbuild: silence Nothing to be done for 'all' message

This patch silences a Makefile.asm-generic message
by defining a dummy rule for all.

make -f /usr/src/git/scripts/Makefile.asm-generic \
            obj=arch/x86/include/generated/asm
make[1]: Nothing to be done for `all'.

Signed-off-by: Peter Foley <pefoley2@verizon.net>
Signed-off-by: Michal Marek <mmarek@suse.cz>

8 years agounicore32: using generic-y format for one line asm-generic files
Guan Xuetao [Thu, 26 May 2011 10:17:43 +0000]
unicore32: using generic-y format for one line asm-generic files

The patch adds one-line asm-generic files in arch/unicore32/include/asm/Kbuild
Also, remove the old implementation in arch/unicore32/Makefile
see commit from Sam Ravnborg <d8ecc5cd8e227bc318513b5306ae88a474b8886d>
  kbuild: asm-generic support

Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Acked-by: Arnd Bergmann <arnd@arndb.de>

8 years agounicore32: change PERCPU to PERCPU_SECTION
Guan Xuetao [Thu, 26 May 2011 09:19:20 +0000]
unicore32: change PERCPU to PERCPU_SECTION

The patch changes PERCPU to PERCPU_SECTION
see commit from Tejun Heo <0415b00d175e0d8945e6785aad21b5f157976ce0>
  percpu: Always align percpu output section to PAGE_SIZE

Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Acked-by: Tejun Heo <tj@kernel.org>

8 years agounicore32: add KBUILD_DEFCONFIG with unicore32_defconfig (old debug_defconfig)
Guan Xuetao [Mon, 16 May 2011 07:28:19 +0000]
unicore32: add KBUILD_DEFCONFIG with unicore32_defconfig (old debug_defconfig)

Rename debug_defconfig to unicore32_defconfig, which is a minimal config for
PKUnity-v3 (130nm) SoC board.
Also, add KBUILD_DEFCONFIG to use 'make defconfig'.

Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Acked-by: Arnd Bergmann <arnd@arndb.de>

8 years agounicore32: change zImage physical address, though it's PIC codes
Guan Xuetao [Wed, 20 Apr 2011 11:06:53 +0000]
unicore32: change zImage physical address, though it's PIC codes

U-boot will load the kernel image to 48M physical memory address.
The patch changes it to the correct address, though it's PIC codes.

Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Acked-by: Arnd Bergmann <arnd@arndb.de>

8 years agounicore32: move rtc-puv3.c to drivers/rtc directory
Guan Xuetao [Thu, 26 May 2011 08:43:27 +0000]
unicore32: move rtc-puv3.c to drivers/rtc directory

The patch moves rtc driver for PKUnity-v3 SoC from arch/unicore32/kernel/
to drivers/rtc/, with renaming it to rtc-puv3.c.
Also, Kconfig, Makefile, and MAINTAINERS are modified correspondingly.

Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Acked-by: Arnd Bergmann <arnd@arndb.de>

8 years agonetpoll: prevent netpoll setup on slave devices
WANG Cong [Thu, 9 Jun 2011 07:28:13 +0000]
netpoll: prevent netpoll setup on slave devices

In commit 8d8fc29d02a33e4bd5f4fa47823c1fd386346093
(netpoll: disable netpoll when enslave a device), we automatically
disable netpoll when the underlying device is being enslaved,
we also need to prevent people from setuping netpoll on
devices that are already enslaved.

Signed-off-by: WANG Cong <amwang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>