14 years ago[ALSA] set owner field in struct pci_driver
Clemens Ladisch [Mon, 12 Sep 2005 06:20:54 +0000]
[ALSA] set owner field in struct pci_driver

AD1889 driver,ALS4000 driver,ATIIXP driver,ATIIXP-modem driver
AZT3328 driver,BT87x driver,CMIPCI driver,CS4281 driver
ENS1370/1+ driver,ES1938 driver,ES1968 driver,FM801 driver
Intel8x0 driver,Intel8x0-modem driver,Maestro3 driver,RME32 driver
RME96 driver,SonicVibes driver,VIA82xx driver,VIA82xx-modem driver
ALI5451 driver,au88x0 driver,CS46xx driver,EMU10K1/EMU10K2 driver
HDA Intel driver,ICE1712 driver,ICE1724 driver,KORG1212 driver
MIXART driver,NM256 driver,RME HDSP driver,RME9652 driver
Trident driver,Digigram VX222 driver,YMFPCI driver
Set the module owner field in each driver's struct pci_driver to get
the driver symlink in the sysfs device directory.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>

14 years ago[ALSA] Several fixes for the Sun DBRI driver
Martin Habets [Sat, 10 Sep 2005 13:39:00 +0000]
[ALSA] Several fixes for the Sun DBRI driver

SPARC DBRI driver
This patch contains the following fixes to the Alsa DBRI driver:

- Remove 2.6.13 build warning on the prom_getproperty() call.

- Rework command synchronization: send a sequence number with D_WAIT,
  and check it in the completion interrupt.
  Move synchronization delays from _cmdsend() to _cmdlock() allowing the
  CPU to do other usefull things while the DBRI is processing the
  commands.

- Fix first argument of printk() calls.

- Enable burst transfers for DBRI. Original 2.4 patch from Krzysztof
  Helt

- Make dbri_debug module parameter writable from sysfs. Remove obsolete
  write access to the /proc debug file.

- Replace udelay() with msleep_interruptible() where possible.

- Update documentation comments.

Signed-off-by: Martin Habets <errandir_news@mph.eclipse.co.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

14 years ago[ALSA] snd-emu10k1: ALSA bug#1297: Fix a error recognising the SB Live Platinum.
James Courtier-Dutton [Sat, 10 Sep 2005 08:24:10 +0000]
[ALSA] snd-emu10k1: ALSA bug#1297: Fix a error recognising the SB Live Platinum.

EMU10K1/EMU10K2 driver
The card does not have an AC97 chip.
.subsystem = 0x80611102

Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>

14 years ago[ALSA] Another fix for DocBook
Takashi Iwai [Fri, 9 Sep 2005 13:05:33 +0000]
[ALSA] Another fix for DocBook

PCM Midlevel
Revive snd_pcm_format_cpu_endian() document.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

14 years ago[ALSA] Replace with kzalloc() - others
Takashi Iwai [Fri, 9 Sep 2005 12:22:34 +0000]
[ALSA] Replace with kzalloc() - others

Documentation,SA11xx UDA1341 driver,Generic drivers,MPU401 UART,OPL3
OPL4,Digigram VX core,I2C cs8427,I2C lib core,I2C tea6330t,L3 drivers
AK4114 receiver,AK4117 receiver,PDAudioCF driver,PPC PMAC driver
SPARC AMD7930 driver,SPARC cs4231 driver,Synth,Common EMU synth
USB generic driver,USB USX2Y
Replace kcalloc(1,..) with kzalloc().

Signed-off-by: Takashi Iwai <tiwai@suse.de>

14 years ago[ALSA] Replace with kzalloc() - pci stuff
Takashi Iwai [Fri, 9 Sep 2005 12:21:46 +0000]
[ALSA] Replace with kzalloc() - pci stuff

AD1889 driver,ATIIXP driver,ATIIXP-modem driver,AZT3328 driver
BT87x driver,CMIPCI driver,CS4281 driver,ENS1370/1+ driver
ES1938 driver,ES1968 driver,FM801 driver,Intel8x0 driver
Intel8x0-modem driver,Maestro3 driver,SonicVibes driver,VIA82xx driver
VIA82xx-modem driver,AC97 Codec,AK4531 codec,au88x0 driver
CA0106 driver,CS46xx driver,EMU10K1/EMU10K2 driver,HDA Codec driver
HDA generic driver,HDA Intel driver,ICE1712 driver,ICE1724 driver
KORG1212 driver,MIXART driver,NM256 driver,Trident driver,YMFPCI driver
Replace kcalloc(1,..) with kzalloc().

Signed-off-by: Takashi Iwai <tiwai@suse.de>

14 years ago[ALSA] Replace with kzalloc() - isa stuff
Takashi Iwai [Fri, 9 Sep 2005 12:21:17 +0000]
[ALSA] Replace with kzalloc() - isa stuff

ES18xx driver,OPL3SA2 driver,AD1816A driver,AD1848 driver,CS4231 driver
ES1688 driver,GUS Library,Opti9xx drivers,EMU8000 driver
SB16/AWE driver,SB drivers
Replace kcalloc(1,..) with kzalloc().

Signed-off-by: Takashi Iwai <tiwai@suse.de>

14 years ago[ALSA] Replace with kzalloc() - seq stuff
Takashi Iwai [Fri, 9 Sep 2005 12:20:49 +0000]
[ALSA] Replace with kzalloc() - seq stuff

ALSA sequencer,Instrument layer,ALSA<-OSS sequencer
Replace kcalloc(1,..) with kzalloc().

Signed-off-by: Takashi Iwai <tiwai@suse.de>

14 years ago[ALSA] Replace with kzalloc() - core stuff
Takashi Iwai [Fri, 9 Sep 2005 12:20:23 +0000]
[ALSA] Replace with kzalloc() - core stuff

Control Midlevel,ALSA Core,HWDEP Midlevel,PCM Midlevel,RawMidi Midlevel
Timer Midlevel,ALSA<-OSS emulation
Replace kcalloc(1,..) with kzalloc().

Signed-off-by: Takashi Iwai <tiwai@suse.de>

14 years ago[ALSA] hda-codec - Added ASUS A6
Takashi Iwai [Fri, 9 Sep 2005 11:56:32 +0000]
[ALSA] hda-codec - Added ASUS A6

HDA Codec driver
Added ASUS A6 support for ALC880 codec.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

14 years ago[ALSA] intel8x0 - Add buggy_semaphore option
Takashi Iwai [Thu, 8 Sep 2005 17:54:17 +0000]
[ALSA] intel8x0 - Add buggy_semaphore option

Documentation,Intel8x0 driver
Added buggy_semaphore module option to snd-intel8x0 driver
for a workaround for hardwards with buggy codec semaphores.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

14 years ago[ALSA] pcm-oss - Add bugg-yptr option
Takashi Iwai [Thu, 8 Sep 2005 11:48:34 +0000]
[ALSA] pcm-oss - Add bugg-yptr option

Documentation,ALSA<-OSS emulation
Added 'buggy-ptr' proc option to switch the behavior of GETOPTR ioctl.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

14 years ago[ALSA] powermac - Add AUTO_DRC config
Takashi Iwai [Wed, 7 Sep 2005 15:08:40 +0000]
[ALSA] powermac - Add AUTO_DRC config

PPC,PPC Tumbler driver
Added AUTO_DRC kernel config to enable/disable the auto-DRC-toggle
feature on tumbler/snapper.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

14 years ago[ALSA] hda-intel - Fix modem PCM creation
Takashi Iwai [Wed, 7 Sep 2005 13:26:56 +0000]
[ALSA] hda-intel - Fix modem PCM creation

HDA Intel driver
Fix a bug of modem PCM creation (due to a typo).

Signed-off-by: Takashi Iwai <tiwai@suse.de>

14 years ago[ALSA] pci_find_device remove
Jiri Slaby [Wed, 7 Sep 2005 12:28:33 +0000]
[ALSA] pci_find_device remove

Memalloc module,CS46xx driver,VIA82xx driver,ALI5451 driver
au88x0 driver
Replace pci_find_device() with pci_get_device() and pci_dev_put().

Signed-off-by: Jiri Slaby <xslaby@fi.muni.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

14 years ago[ALSA] Remove superfluous PCI ID definitions
Takashi Iwai [Wed, 7 Sep 2005 12:08:11 +0000]
[ALSA] Remove superfluous PCI ID definitions

CS46xx driver,EMU10K1/EMU10K2 driver,PCM Midlevel,Trident driver
YMFPCI driver,BT87x driver,CMIPCI driver,CS4281 driver
ENS1370/1+ driver,ES1938 driver,ES1968 driver,Intel8x0 driver
Intel8x0-modem driver,Maestro3 driver,RME32 driver,RME96 driver
SonicVibes driver,VIA82xx driver,ALI5451 driver,ICE1712 driver
ICE1724 driver,NM256 driver,RME HDSP driver,RME9652 driver
Remove superfluous PCI ID definitions.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

14 years ago[ALSA] Fix DocBook warnings
Takashi Iwai [Wed, 7 Sep 2005 11:38:19 +0000]
[ALSA] Fix DocBook warnings

PCM Midlevel,RawMidi Midlevel
Fix DocBook warnings.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

14 years ago[ALSA] hda-codec - Assign audio PCMS first
Takashi Iwai [Wed, 7 Sep 2005 11:29:22 +0000]
[ALSA] hda-codec - Assign audio PCMS first

HDA Codec driver,HDA Intel driver,HDA generic driver
Assign audio PCMs first before modem PCMs.
The modem stream is assigned up to device #6, to be consistent over
different models.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

14 years ago[ALSA] Correct detection of iBook G4 1420Mhz soundcard
Vincent Pelletier [Wed, 7 Sep 2005 11:28:14 +0000]
[ALSA] Correct detection of iBook G4 1420Mhz soundcard

PPC PMAC driver
Here is a patch to correct detection of the soundcard on my iBook model
(bought really recently).
Without that fix, there were only andui in the headphone, and the mixer
was totaly non functional.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

14 years ago[ALSA] rtctimer: add option to make RTC timer the default sequencer timer
Clemens Ladisch [Tue, 6 Sep 2005 06:00:19 +0000]
[ALSA] rtctimer: add option to make RTC timer the default sequencer timer

ALSA Core,ALSA sequencer
Add an option to make the RTC timer the default sequencer timer.  This
becomes necessary for precise MIDI timing when the system timer runs at
less than 1000 Hz.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>

14 years ago[ALSA] Add snd_card_set_generic_dev() call to ISA drivers
Takashi Iwai [Mon, 5 Sep 2005 15:19:20 +0000]
[ALSA] Add snd_card_set_generic_dev() call to ISA drivers

ISA,CMI8330 driver,ES18xx driver,OPL3SA2 driver,Sound Galaxy driver
Sound Scape driver,AD1848 driver,CS4231 driver,CS4236+ driver
ES1688 driver,GUS Classic driver,GUS Extreme driver,GUS MAX driver
AMD InterWave driver,Opti9xx drivers,SB16/AWE driver,SB8 driver
Wavefront drivers
- Added snd_card_set_generic_dev() call.
- Added SND_GENERIC_DRIVER to Kconfig.
- Clean up the error path in probe if necessary.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

14 years ago[ALSA] Add snd_card_set_generic_dev() call
Takashi Iwai [Mon, 5 Sep 2005 15:17:58 +0000]
[ALSA] Add snd_card_set_generic_dev() call

ARM,SA11xx UDA1341 driver,Generic drivers,MPU401 UART,MIPS
MIPS AU1x00 driver,PPC,PPC PowerMac driver,SPARC,SPARC AMD7930 driver
SPARC cs4231 driver,SPARC DBRI driver
- Added snd_card_set_generic_dev() call.
- Added SND_GENERIC_DRIVER to Kconfig.
- Clean up the error path in probe if necessary.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

14 years ago[ALSA] Introduce snd_card_set_generic_dev()
Takashi Iwai [Mon, 5 Sep 2005 15:15:37 +0000]
[ALSA] Introduce snd_card_set_generic_dev()

ALSA Core
A new function snd_card_set_generic_dev() is introduced to add the
'generic device' support for devices without proper bus on sysfs.
It's a last resort, and should be removed in future when they have
a proper bus, instead.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

14 years ago[ALSA] Update/fix ALSA document
Takashi Iwai [Mon, 5 Sep 2005 15:12:29 +0000]
[ALSA] Update/fix ALSA document

Documentation
Update/fix ALSA document.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

14 years ago[ALSA] hda-intel - Check validity of DMA position
Takashi Iwai [Mon, 5 Sep 2005 15:11:40 +0000]
[ALSA] hda-intel - Check validity of DMA position

HDA Intel driver
Check the validity of the current DMA position when position_fix=0 (auto)
is set.  If the DMA position overcomes the threshold, the driver changes
the fix behavior automatically to use POSBUF.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

14 years ago[ALSA] Add snd_card_set_dev()
Takashi Iwai [Mon, 5 Sep 2005 14:56:40 +0000]
[ALSA] Add snd_card_set_dev()

ARM AACI PL041 driver,PARISC Harmony driver
Added snd_card_set_dev() calls to register the device pointer for the card.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

14 years ago[ALSA] hda-codec - Bring the Vaio's RA826G HDA (82801) to life ...
Davide Libenzi [Mon, 5 Sep 2005 09:56:47 +0000]
[ALSA] hda-codec - Bring the Vaio's RA826G HDA (82801) to life ...

HDA Codec driver
Add the subsystem PCI devid to the list (on top of 2.6.13).

Signed-off-by: Davide Libenzi <davidel@xmailserver.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

14 years ago[ALSA] opti93x: optimize a register access
Clemens Ladisch [Mon, 5 Sep 2005 08:36:27 +0000]
[ALSA] opti93x: optimize a register access

Opti9xx drivers
When clearing some bits in a register, don't bother with the bits that
won't be changed anyway.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>

14 years ago[ALSA] sparse address space annotations
Clemens Ladisch [Mon, 5 Sep 2005 08:35:20 +0000]
[ALSA] sparse address space annotations

ALSA Core,RawMidi Midlevel,ALSA<-OSS emulation,ALSA sequencer
RME32 driver,RME96 driver,EMU10K1/EMU10K2 driver,NM256 driver
Add sparse annotations where we do strange this with __iomem/__user
pointers.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>

14 years ago[ALSA] usb-audio: add SNDRV_PCM_INFO_BATCH flag
Clemens Ladisch [Mon, 5 Sep 2005 08:31:05 +0000]
[ALSA] usb-audio: add SNDRV_PCM_INFO_BATCH flag

USB generic driver
Add the SNDRV_PCM_INFO_BATCH flag to the PCM hardware information to
indicate that the driver uses double buffering.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>

14 years ago[ALSA] snd-ca0106, snd-emu10k1: Add symlink in the sys tree.
James Courtier-Dutton [Sat, 3 Sep 2005 10:05:47 +0000]
[ALSA] snd-ca0106, snd-emu10k1: Add symlink in the sys tree.

CA0106 driver,EMU10K1/EMU10K2 driver
A thread appeared on the LKML. This patch implements the fix.

Question:
in sysfs, /sys/bus/*/drivers lists the driver names, with their exported .name (eg. '.name = 'EMU10K1_Audigy'' in the module code, from now on 'driver name'). In /sys/modules, the kernel modules are listed with their module name, eg. snd_emu10k1. However, it seems to me that in sysfs, there is no way in particular to tell, which module has which .name. That is, that snd_emu10k1 is EMU10K1_Audigy and vice versa.

I wonder whether it wouldn't be possible to add a symlink to the particular module from the driver, and/or from the module to the driver, so the list of devices handled by the module and the module name would be accessible. This way, I would know which driver name corresponds to which module name and vice versa.

Answer:
For PCI drivers, just add the line:
.owner = THIS_MODULE,

to their struct pci_driver definition and you will get the symlink
created for you.

Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>

14 years ago[ALSA] Fix ALC658D support
Takashi Iwai [Fri, 2 Sep 2005 12:03:05 +0000]
[ALSA] Fix ALC658D support

AC97 Codec
Fix the internal speaker problem (e.g. Targa Traveller 826)
with ALC658D codec.  The info is taken from Cyberlink/realtek-modified code.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

14 years ago[ALSA] hdsp: always initialize card name
Clemens Ladisch [Fri, 2 Sep 2005 06:49:21 +0000]
[ALSA] hdsp: always initialize card name

RME HDSP driver
When using the kernel firmware loader, initialize the card shortname
before registering the card with ALSA to prevent it from using a
default card ID.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>

14 years ago[ALSA] ad1889: add AD1889 driver docs
Clemens Ladisch [Fri, 2 Sep 2005 05:57:59 +0000]
[ALSA] ad1889: add AD1889 driver docs

Documentation
move the AD1889 driver docs to the kernel tree, too

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>

14 years ago[ALSA] intel8x0 - Add quirk for IBM NetVisa A30p
Takashi Iwai [Thu, 1 Sep 2005 11:56:23 +0000]
[ALSA] intel8x0 - Add quirk for IBM NetVisa A30p

Intel8x0 driver
Added ac97_quirk entry for IBM NetVisa A30p.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

14 years ago[ALSA] atiixp - Fix PM resume
Takashi Iwai [Thu, 1 Sep 2005 09:56:34 +0000]
[ALSA] atiixp - Fix PM resume

ATIIXP driver
Fixed PM resume on atiixp driver.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

14 years ago[ALSA] ad1889: add AD1889 driver
Clemens Ladisch [Thu, 1 Sep 2005 06:14:40 +0000]
[ALSA] ad1889: add AD1889 driver

PCI drivers,AD1889 driver
move the AD1889 driver to the kernel tree

Acked-by: Thibaut Varene <varenet@parisc-linux.org>
Acked-by: Kyle McMartin <kyle@parisc-linux.org>

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>

14 years ago[ALSA] Fix EAPD for MSI S270
Takashi Iwai [Wed, 31 Aug 2005 15:31:07 +0000]
[ALSA] Fix EAPD for MSI S270

AC97 Codec
Fix pin47 setting for EAPD control on MSI S270 laptop.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

14 years ago[ALSA] snd-ca0106: Tidy up volume controls
James Courtier-Dutton [Tue, 30 Aug 2005 19:00:46 +0000]
[ALSA] snd-ca0106: Tidy up volume controls

CA0106 driver
Playback volume controls were appearing in both the playback and capture
displays of alsamixer. Now those playback controls only appear in the
playback display.

Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>

14 years agoMerge branch 'release' of master.kernel.org:/pub/scm/linux/kernel/git/aegl/linux-2.6
Linus Torvalds [Sun, 11 Sep 2005 22:51:40 +0000]
Merge branch 'release' of /linux/kernel/git/aegl/linux-2.6

14 years agoPull sn-features into release branch
Tony Luck [Sun, 11 Sep 2005 21:34:23 +0000]
Pull sn-features into release branch

14 years agoPull sim-fixes into release branch
Tony Luck [Sun, 11 Sep 2005 21:27:15 +0000]
Pull sim-fixes into release branch

14 years ago[IA64] MCA/INIT: remove obsolete unwind code
Keith Owens [Sun, 11 Sep 2005 07:24:42 +0000]
[IA64] MCA/INIT: remove obsolete unwind code

Delete the special case unwind code that was only used by the old
MCA/INIT handler.

Signed-off-by: Keith Owens <kaos@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

14 years ago[IA64] MCA/INIT: remove the physical mode path from minstate.h
Keith Owens [Sun, 11 Sep 2005 07:23:42 +0000]
[IA64] MCA/INIT: remove the physical mode path from minstate.h

Remove the physical mode path from minstate.h.

Signed-off-by: Keith Owens <kaos@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

14 years ago[PATCH] MCA/INIT: use per cpu stacks
Keith Owens [Sun, 11 Sep 2005 07:22:53 +0000]
[PATCH] MCA/INIT: use per cpu stacks

The bulk of the change.  Use per cpu MCA/INIT stacks.  Change the SAL
to OS state (sos) to be per process.  Do all the assembler work on the
MCA/INIT stacks, leaving the original stack alone.  Pass per cpu state
data to the C handlers for MCA and INIT, which also means changing the
mca_drv interfaces slightly.  Lots of verification on whether the
original stack is usable before converting it to a sleeping process.

Signed-off-by: Keith Owens <kaos@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

14 years ago[IA64] MCA/INIT: avoid reading INIT record during INIT event
Keith Owens [Sun, 11 Sep 2005 07:21:46 +0000]
[IA64] MCA/INIT: avoid reading INIT record during INIT event

Reading the INIT record from SAL during the INIT event has proved to be
unreliable, and a source of hangs during INIT processing.  The new
MCA/INIT handlers remove the need to get the INIT record from SAL.
Change salinfo.c so mca.c can just flag that a new record is available,
without having to read the record during INIT processing.  This patch
can be applied without the new MCA/INIT handlers.

Also clean up some usage of NR_CPUS which should have been using
cpu_online().

Signed-off-by: Keith Owens <kaos@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

14 years ago[IA64] MCA/INIT: add an extra thread_info flag
Keith Owens [Sun, 11 Sep 2005 07:20:14 +0000]
[IA64] MCA/INIT: add an extra thread_info flag

Add an extra thread_info flag to indicate the special MCA/INIT stacks.
Mainly for debuggers.

Signed-off-by: Keith Owens <kaos@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

14 years ago[PATCH] MCA/INIT: scheduler hooks
Keith Owens [Sun, 11 Sep 2005 07:19:06 +0000]
[PATCH] MCA/INIT: scheduler hooks

Scheduler hooks to see/change which process is deemed to be on a cpu.

Signed-off-by: Keith Owens <kaos@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

14 years agomips: rename offsets.c to asm-offsets.c
Sam Ravnborg [Sun, 11 Sep 2005 20:35:18 +0000]
mips: rename offsets.c to asm-offsets.c

Cannot build MIPS now.
We need to change offset.c to asm-offsets.c

Signed-off-by: Yoichi Yuasa <yuasa@hh.iij4u.or.jp>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

14 years agokbuild: fix silentoldconfig with make O=
Sam Ravnborg [Sun, 11 Sep 2005 20:32:57 +0000]
kbuild: fix silentoldconfig with make O=

Al Viro reported that sometimes silentoldconfig failed because
output directory was missing.
So create it unconditionally before executing conf

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

14 years agokbuild: rename prepare to archprepare to fix dependency chain
Sam Ravnborg [Sun, 11 Sep 2005 20:30:22 +0000]
kbuild: rename prepare to archprepare to fix dependency chain

When introducing the generic asm-offsets.h support the dependency
chain for the prepare targets was changed. All build scripts expecting
include/asm/asm-offsets.h to be made when using the prepare target would broke.
With the limited number of prepare targets left in arch Makefiles
the trivial solution was to introduce a new arch specific target: archprepare

The dependency chain looks like this now:

prepare
  |
  +--> prepare0
         |
         +--> archprepare
                |
+--> scripts_basic
                +--> prepare1
                       |
                       +---> prepare2
                               |
                               +--> prepare3

So prepare 3 is processed before prepare2 etc.
This guaantees that the asm symlink, version.h, scripts_basic
are all updated before archprepare is processed.

prepare0 which build the asm-offsets.h file will need the
actions performed by archprepare.

The head target is now named prepare, because users scripts will most
likely use that target, but prepare-all has been kept for compatibility.
Updated Documentation/kbuild/makefiles.txt.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

14 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband
Linus Torvalds [Sun, 11 Sep 2005 17:16:07 +0000]
Merge /pub/scm/linux/kernel/git/roland/infiniband

14 years agoMerge branch 'for-linus' from kernel.org:/.../shaggy/jfs-2.6 manually
Linus Torvalds [Sun, 11 Sep 2005 17:14:54 +0000]
Merge branch 'for-linus' from /.../shaggy/jfs-2.6 manually

Clash due to new delete_inode behavior (the filesystem now needs to do
the truncate_inode_pages() call itself).

Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] Sun HME: enable and map PCI ROM properly
Willy Tarreau [Sun, 11 Sep 2005 07:04:07 +0000]
[PATCH] Sun HME: enable and map PCI ROM properly

This ports the Sun GEM ROM mapping/enable fixes it sunhme (which used
the same PCI ROM mapping code).

Without this, I get NULL MAC addresses for all 4 ports (it's a SUN QFE).
With it, I get the correct addresses (the ones printed on the label on
the card).

Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years agoSun GEM ethernet: enable and map PCI ROM properly
Linus Torvalds [Sun, 11 Sep 2005 16:26:20 +0000]
Sun GEM ethernet: enable and map PCI ROM properly

This same patch was reported to fix the MAC address detection on sunhme
(next patch).  Most people seem to be running this on Sparcs or PPC
machines, where we get the MAC address from their respective firmware
rather than from the (previously broken) ROM mapping routines.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years agohpt366: write the full 4 bytes of ROM address, not just low 1 byte
Linus Torvalds [Sun, 11 Sep 2005 16:22:50 +0000]
hpt366: write the full 4 bytes of ROM address, not just low 1 byte

This is one heck of a confused driver.  It uses a byte write to a dword
register to enable a ROM resource that it doesn't even seem to be using.

"Lost and wandering in the desert of confusion"

Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years agoMerge master.kernel.org:/home/rmk/linux-2.6-mmc
Linus Torvalds [Sun, 11 Sep 2005 16:16:03 +0000]
Merge master.kernel.org:/home/rmk/linux-2.6-mmc

14 years ago[MFD] Cleanups suggested by Dmitri, Vojtech and lists.
Pavel Machek [Sun, 11 Sep 2005 09:28:00 +0000]
[MFD] Cleanups suggested by Dmitri, Vojtech and lists.

These are small ucb1x00-ts cleanups, as suggested by Vojtech, Dmitri
and the lists.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

14 years ago[MFD] Add code UCB1200/UCB1300 assabet platform support
Russell King [Sun, 11 Sep 2005 09:27:23 +0000]
[MFD] Add code UCB1200/UCB1300 assabet platform support

Add support for Intel assabet specific board support for
UCB1200/UCB1300 devices.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

14 years ago[MFD] Add code UCB1200/UCB1300 touchscreen support
Russell King [Sun, 11 Sep 2005 09:26:57 +0000]
[MFD] Add code UCB1200/UCB1300 touchscreen support

Add support for Philips UCB1200 and UCB1300 touchscreen
interfaces found on ARM devices.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

14 years ago[MFD] Add code UCB1200/UCB1300 device support
Russell King [Sun, 11 Sep 2005 09:26:31 +0000]
[MFD] Add code UCB1200/UCB1300 device support

Add the core device support code for the Philips UCB1200 and
UCB1300 devices.  Also includes the following from Pavel:

This fixes u32 vs. pm_message_t confusion and uses cleaner
try_to_freeze() [fixing compilation as a side-effect on newer
kernels.]

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

14 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Sun, 11 Sep 2005 00:42:47 +0000]
Merge /pub/scm/linux/kernel/git/davem/net-2.6

14 years ago[PATCH] Fix breakage on ppc{,64} by "nvidiafb: Fallback to firmware EDID"
Alexey Dobriyan [Sun, 11 Sep 2005 00:01:09 +0000]
[PATCH] Fix breakage on ppc{,64} by "nvidiafb: Fallback to firmware EDID"

Fix

drivers/video/nvidia/nv_of.c:34: error: conflicting types for 'nvidia_probe_i2c_connector'
drivers/video/nvidia/nv_proto.h:38: error: previous declaration of 'nvidia_probe_i2c_connector' was here

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Al Viro <viro@ZenIV.linux.org.uk>
Acked-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[TCP]: Fix double adjustment of tp->{lost,left}_out in tcp_fragment().
Herbert Xu [Sun, 11 Sep 2005 00:19:09 +0000]
[TCP]: Fix double adjustment of tp->{lost,left}_out in tcp_fragment().

There is an extra left_out/lost_out adjustment in tcp_fragment which
means that the lost_out accounting is always wrong.  This patch removes
that chunk of code.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

14 years ago[PATCH] uml spinlock breakage
Al Viro [Sat, 10 Sep 2005 23:24:27 +0000]
[PATCH] uml spinlock breakage

mingo missed that one...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/dtor/input
Linus Torvalds [Sat, 10 Sep 2005 22:54:41 +0000]
Merge /pub/scm/linux/kernel/git/dtor/input

14 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/sam/kbuild
Linus Torvalds [Sat, 10 Sep 2005 20:18:15 +0000]
Merge /pub/scm/linux/kernel/git/sam/kbuild

14 years agokbuild: fix generic asm-offsets.h support
Sam Ravnborg [Sat, 10 Sep 2005 19:05:36 +0000]
kbuild: fix generic asm-offsets.h support

iThis fixes a bug where the generated asm-offsets.h file was saved in
the source tree even with make O=.
Thanks to Stephen Rothwell <sfr@canb.auug.org.au> for the report.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

14 years agokbuild: add objectify
Sam Ravnborg [Sat, 10 Sep 2005 19:02:11 +0000]
kbuild: add objectify

Use foo := $(call objectify, $(foo)) to prefix $(foo) with $(obj)/ unless
$(foo) is an absolute path.
For now no in-tree users - soon to come.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

14 years ago[PATCH] uml: avoid already done dirtying
Paolo 'Blaisorblade' Giarrusso [Sat, 10 Sep 2005 17:44:58 +0000]
[PATCH] uml: avoid already done dirtying

The PTE returned from handle_mm_fault is already marked as dirty and accessed
if needed.

Also, since this is not set with set_pte() (which sets NEWPAGE and NEWPROT as
needed), this wouldn't work anyway.

This version has been updated and fixed, thanks to some feedback from Jeff Dike.

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] uml: fix fault handler on write
Paolo 'Blaisorblade' Giarrusso [Sat, 10 Sep 2005 17:44:57 +0000]
[PATCH] uml: fix fault handler on write

The UML fault handler was recently changed to enforce PROT_NONE protections,
by requiring VM_READ or VM_EXEC on VMA's.

However, by mistake, things were changed such that VM_READ is always checked,
also on write faults; so a VMA mapped with only PROT_WRITE is not readable
(unless it's prefaulted with MAP_POPULATE or with a write), which is different
from i386.

Discovered while testing remap_file_pages protection support.

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] uml: inline mk_pte and various friends
Paolo 'Blaisorblade' Giarrusso [Sat, 10 Sep 2005 17:44:56 +0000]
[PATCH] uml: inline mk_pte and various friends

Turns out that, for UML, a *lot* of VM-related trivial functions are not
inlined but rather normal functions.

In other sections of UML code, this is justified by having files which
interact with the host and cannot therefore include kernel headers, but in
this case there's no such justification.

I've had to turn many of them to macros because of missing declarations. While
doing this, I've decided to reuse some already existing macros.

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] x86_64 linker script cleanups for debug sections
Paolo 'Blaisorblade' Giarrusso [Sat, 10 Sep 2005 17:44:55 +0000]
[PATCH] x86_64 linker script cleanups for debug sections

Use the new macros for x86_64 too.

Note that the current scripts includes different definitions; more exactly,
it only contains part of the DWARF2 sections and the .comment one from
Stabs. Shouldn't be a problem, anyway.

Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] i386 / uml: add dwarf sections to static link script
Paolo 'Blaisorblade' Giarrusso [Sat, 10 Sep 2005 17:44:54 +0000]
[PATCH] i386 / uml: add dwarf sections to static link script

Inside the linker script, insert the code for DWARF debug info sections. This
may help GDB'ing a Uml binary. Actually, it seems that ld is able to guess
what I added correctly, but normal linker scripts include this section so it
should be correct anyway adding it.

On request by Sam Ravnborg <sam@ravnborg.org>, I've added it to
asm-generic/vmlinux.lds.s. I've also moved there the stabs debug section,
used the new macro in i386 linker script and added DWARF debug section to
that.

In the truth, I've not been able to verify the difference in GDB behaviour
after this change (I've seen large improvements with another patch). This
may depend on my binutils version, older one may have worse defaults.

However, this section is present in normal linker script, so add it at
least for the sake of cleanness.

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] Uml: more cleaning
Paolo 'Blaisorblade' Giarrusso [Sat, 10 Sep 2005 17:44:53 +0000]
[PATCH] Uml: more cleaning

We must remove even arch/um/os-Linux/util/mk_user_constants, which we don't do.
Also, Kconfig_arch must be listed only once, between CLEAN_FILES.

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years agoMerge davem@outer-richmond.davemloft.net:src/GIT/net-2.6/
David S. Miller [Sat, 10 Sep 2005 18:01:33 +0000]
Merge davem@outer-richmond.davemloft.net:src/GIT/net-2.6/

14 years agoMerge master.kernel.org:/home/rmk/linux-2.6-serial
Linus Torvalds [Sat, 10 Sep 2005 17:17:13 +0000]
Merge master.kernel.org:/home/rmk/linux-2.6-serial

14 years agoMerge master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Sat, 10 Sep 2005 17:16:47 +0000]
Merge master.kernel.org:/home/rmk/linux-2.6-arm

14 years ago[PATCH] envctrl fixes
viro@ZenIV.linux.org.uk [Fri, 9 Sep 2005 21:09:08 +0000]
[PATCH] envctrl fixes

envctrl doesn't need unistd.h; moreover, since it declares errno static
gcc4 gets very unhappy about including unistd.h.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] __user annotations (scsi/ch)
viro@ZenIV.linux.org.uk [Fri, 9 Sep 2005 21:03:44 +0000]
[PATCH] __user annotations (scsi/ch)

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] powerpc: Move include3 to arch/$(ARCH)/include
Stephen Rothwell [Sat, 10 Sep 2005 14:00:14 +0000]
[PATCH] powerpc: Move include3 to arch/$(ARCH)/include

This is less troublesome and makes more sense.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] cfq-iosched: reverse bad reference count fix
Jens Axboe [Sat, 10 Sep 2005 12:17:10 +0000]
[PATCH] cfq-iosched: reverse bad reference count fix

The reference count fix merged isn't fully bug free. It doesn't leak
now, but instead it crashes due to looking at freed memory. So for now,
lets reverse the change and I'll fix it for real next week.

Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] ppc32: support hotplug cpu on powermacs
Paul Mackerras [Sat, 10 Sep 2005 11:13:13 +0000]
[PATCH] ppc32: support hotplug cpu on powermacs

This allows cpus to be off-lined on 32-bit SMP powermacs.  When a cpu
is off-lined, it is put into sleep mode with interrupts disabled.  It
can be on-lined again by asserting its soft-reset pin, which is
connected to a GPIO pin.

With this I can off-line the second cpu in my dual G4 powermac, which
means that I can then suspend the machine (the suspend/resume code
refuses to suspend if more than one cpu is online, and making it cope
with multiple cpus is surprisingly messy).

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] ppc32: Kill init on unhandled synchronous signals
Paul Mackerras [Sat, 10 Sep 2005 11:13:11 +0000]
[PATCH] ppc32: Kill init on unhandled synchronous signals

This is a patch that I have had in my tree for ages.  If init causes
an exception that raises a signal, such as a SIGSEGV, SIGILL or
SIGFPE, and it hasn't registered a handler for it, we don't deliver
the signal, since init doesn't get any signals that it doesn't have a
handler for.  But that means that we just return to userland and
generate the same exception again immediately.  With this patch we
print a message and kill init in this situation.

This is very useful when you have a bug in the kernel that means that
init doesn't get as far as executing its first instruction. :)
Without this patch the system hangs when it gets to starting the
userland init; with it you at least get a message giving you a clue
about what has gone wrong.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] telephony: fix-up schedule_timeout() usage
Nishanth Aravamudan [Sat, 10 Sep 2005 07:27:31 +0000]
[PATCH] telephony: fix-up schedule_timeout() usage

Use schedule_timeout_uninterruptible() instead of
set_current_state()/schedule_timeout() to reduce kernel size.

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] parport: fix-up schedule_timeout() usage
Nishanth Aravamudan [Sat, 10 Sep 2005 07:27:31 +0000]
[PATCH] parport: fix-up schedule_timeout() usage

Use schedule_timeout_interruptible() instead of
set_current_state()/schedule_timeout() to reduce kernel size.  Also use
human-time to jiffies units conversion functions rather than direct HZ
division to avoid rounding issues.

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] drivers/char: fix-up schedule_timeout() usage
Nishanth Aravamudan [Sat, 10 Sep 2005 07:27:30 +0000]
[PATCH] drivers/char: fix-up schedule_timeout() usage

Use schedule_timeout_interruptible() instead of
set_current_state()/schedule_timeout() to reduce kernel size.

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] drivers/cdrom: fix-up schedule_timeout() usage
Nishanth Aravamudan [Sat, 10 Sep 2005 07:27:29 +0000]
[PATCH] drivers/cdrom: fix-up schedule_timeout() usage

Use schedule_timeout_{un,}interruptible() instead of
set_current_state()/schedule_timeout() to reduce kernel size.

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: Jens Axboe <axboe@suse.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] drivers/block: fix-up schedule_timeout() usage
Nishanth Aravamudan [Sat, 10 Sep 2005 07:27:28 +0000]
[PATCH] drivers/block: fix-up schedule_timeout() usage

Use schedule_timeout_{un,}interruptible() instead of
set_current_state()/schedule_timeout() to reduce kernel size.

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: Jens Axboe <axboe@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] mips: fix-up schedule_timeout() usage
Nishanth Aravamudan [Sat, 10 Sep 2005 07:27:27 +0000]
[PATCH] mips: fix-up schedule_timeout() usage

Use schedule_timeout_interruptible() instead of
set_current_state()/schedule_timeout() to reduce kernel size.  Also, replace
custom timespectojiffies() function with globally availabe
timespec_to_jiffies().

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] i386: fix-up schedule_timeout() usage
Nishanth Aravamudan [Sat, 10 Sep 2005 07:27:26 +0000]
[PATCH] i386: fix-up schedule_timeout() usage

Use schedule_timeout_interruptible() instead of
set_current_state()/schedule_timeout() to reduce kernel size.

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] alpha: fix-up schedule_timeout() usage
Nishanth Aravamudan [Sat, 10 Sep 2005 07:27:25 +0000]
[PATCH] alpha: fix-up schedule_timeout() usage

Use schedule_timeout_interruptible() instead of
set_current_state()/schedule_timeout() to reduce kernel size.

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] mm: fix-up schedule_timeout() usage
Nishanth Aravamudan [Sat, 10 Sep 2005 07:27:25 +0000]
[PATCH] mm: fix-up schedule_timeout() usage

Use schedule_timeout_{,un}interruptible() instead of
set_current_state()/schedule_timeout() to reduce kernel size.

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] kernel: fix-up schedule_timeout() usage
Nishanth Aravamudan [Sat, 10 Sep 2005 07:27:24 +0000]
[PATCH] kernel: fix-up schedule_timeout() usage

Use schedule_timeout_{,un}interruptible() instead of
set_current_state()/schedule_timeout() to reduce kernel size.

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] fs: fix-up schedule_timeout() usage
Nishanth Aravamudan [Sat, 10 Sep 2005 07:27:23 +0000]
[PATCH] fs: fix-up schedule_timeout() usage

Use schedule_timeout_{,un}interruptible() instead of
set_current_state()/schedule_timeout() to reduce kernel size.  Also use helper
functions to convert between human time units and jiffies rather than constant
HZ division to avoid rounding errors.

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] time.h: remove ifdefs
Andrew Morton [Sat, 10 Sep 2005 07:27:23 +0000]
[PATCH] time.h: remove ifdefs

Remove these ifdefs - there's no need to have more than one definition of
these multipliers anywhere.

Cc: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] include: update jiffies/{m,u}secs conversion functions
Nishanth Aravamudan [Sat, 10 Sep 2005 07:27:22 +0000]
[PATCH] include: update jiffies/{m,u}secs conversion functions

Clarify the human-time units to jiffies conversion functions by using the
constants in time.h.  This makes many of the subsequent patches direct
copies of the current code.

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] add schedule_timeout_{,un}interruptible() interfaces
Nishanth Aravamudan [Sat, 10 Sep 2005 07:27:21 +0000]
[PATCH] add schedule_timeout_{,un}interruptible() interfaces

Add schedule_timeout_{,un}interruptible() interfaces so that
schedule_timeout() callers don't have to worry about forgetting to add the
set_current_state() call beforehand.

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] i386/x86_64: make get_cpu_vendor() static
Adrian Bunk [Sat, 10 Sep 2005 07:27:21 +0000]
[PATCH] i386/x86_64: make get_cpu_vendor() static

get_cpu_vendor() no longer has any users in other files.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] fs/cramfs/uncompress.c should #include <linux/cramfs_fs.h>
Adrian Bunk [Sat, 10 Sep 2005 07:27:20 +0000]
[PATCH] fs/cramfs/uncompress.c should #include <linux/cramfs_fs.h>

Every file should #include the header with the prototypes of the global
functions it is offering.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>