6 years agoreiserfs: Fix lock ordering during remount
Jan Kara [Tue, 13 Nov 2012 13:55:52 +0000]
reiserfs: Fix lock ordering during remount

commit 3bb3e1fc47aca554e7e2cc4deeddc24750987ac2 upstream.

When remounting reiserfs dquot_suspend() or dquot_resume() can be called.
These functions take dqonoff_mutex which ranks above write lock so we have
to drop it before calling into quota code.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoNFS: Wait for session recovery to finish before returning
Bryan Schumaker [Tue, 30 Oct 2012 20:06:35 +0000]
NFS: Wait for session recovery to finish before returning

commit 399f11c3d872bd748e1575574de265a6304c7c43 upstream.

Currently, we will schedule session recovery and then return to the
caller of nfs4_handle_exception.  This works for most cases, but causes
a hang on the following test case:

Client Server
------ ------
Open file over NFS v4.1
Write to file
Expire client
Try to lock file

The server will return NFS4ERR_BADSESSION, prompting the client to
schedule recovery.  However, the client will continue placing lock
attempts and the open recovery never seems to be scheduled.  The
simplest solution is to wait for session recovery to run before retrying
the lock.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agodrm/i915: fix overlay on i830M
Daniel Vetter [Mon, 22 Oct 2012 10:55:55 +0000]
drm/i915: fix overlay on i830M

commit a9193983f4f292a82a00c72971c17ec0ee8c6c15 upstream.

The overlay on the i830M has a peculiar failure mode: It works the
first time around after boot-up, but consistenly hangs the second time
it's used.

Chris Wilson has dug out a nice errata:

"1.5.12 Clock Gating Disable for Display Register
Address Offset: 06200h–06203h

"Bit 3
Ovrunit Clock Gating Disable.
0 = Clock gating controlled by unit enabling logic
1 = Disable clock gating function
DevALM Errata ALM049: Overlay Clock Gating Must be Disabled:  Overlay
& L2 Cache clock gating must be disabled in order to prevent device
hangs when turning off overlay.SW must turn off Ovrunit clock gating
(6200h) and L2 Cache clock gating (C8h)."

Now I've nowhere found that 0xc8 register and hence couldn't apply the
l2 cache workaround. But I've remembered that part of the magic that
the OVERLAY_ON/OFF commands are supposed to do is to rearrange cache
allocations so that the overlay scaler has some scratch space.

And while pondering how that could explain the hang the 2nd time we
enable the overlay, I've remembered that the old ums overlay code did
_not_ issue the OVERLAY_OFF cmd.

And indeed, disabling the OFF cmd results in the overlay working
flawlessly, so I guess we can workaround the lack of the above
workaround by simply never disabling the overlay engine once it's
enabled.

Note that we have the first part of the above w/a already implemented
in i830_init_clock_gating - leave that as-is to avoid surprises.

v2: Add a comment in the code.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=47827
Tested-by: Rhys <rhyspuk@gmail.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[bwh: Backported to 3.2:
 - Adjust context
 - s/intel_ring_emit(ring, /OUT_RING(/]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agos390/signal: set correct address space control
Martin Schwidefsky [Wed, 7 Nov 2012 09:44:08 +0000]
s390/signal: set correct address space control

commit fa968ee215c0ca91e4a9c3a69ac2405aae6e5d2f upstream.

If user space is running in primary mode it can switch to secondary
or access register mode, this is used e.g. in the clock_gettime code
of the vdso. If a signal is delivered to the user space process while
it has been running in access register mode the signal handler is
executed in access register mode as well which will result in a crash
most of the time.

Set the address space control bits in the PSW to the default for the
execution of the signal handler and make sure that the previous
address space control is restored on signal return. Take care
that user space can not switch to the kernel address space by
modifying the registers in the signal frame.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agosky2: Fix for interrupt handler
Mirko Lindner [Tue, 3 Jul 2012 23:38:46 +0000]
sky2: Fix for interrupt handler

commit d663d181b9e92d80c2455e460e932d34e7a2a7ae upstream.

Re-enable interrupts if it is not our interrupt

Signed-off-by: Mirko Lindner <mlindner@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoeCryptfs: check for eCryptfs cipher support at mount
Tim Sally [Thu, 12 Jul 2012 23:10:24 +0000]
eCryptfs: check for eCryptfs cipher support at mount

commit 5f5b331d5c21228a6519dcb793fc1629646c51a6 upstream.

The issue occurs when eCryptfs is mounted with a cipher supported by
the crypto subsystem but not by eCryptfs. The mount succeeds and an
error does not occur until a write. This change checks for eCryptfs
cipher support at mount time.

Resolves Launchpad issue #338914, reported by Tyler Hicks in 03/2009.
https://bugs.launchpad.net/ecryptfs/+bug/338914

Signed-off-by: Tim Sally <tsally@atomicpeace.com>
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoeCryptfs: Copy up POSIX ACL and read-only flags from lower mount
Tyler Hicks [Mon, 11 Jun 2012 22:42:32 +0000]
eCryptfs: Copy up POSIX ACL and read-only flags from lower mount

commit 069ddcda37b2cf5bb4b6031a944c0e9359213262 upstream.

When the eCryptfs mount options do not include '-o acl', but the lower
filesystem's mount options do include 'acl', the MS_POSIXACL flag is not
flipped on in the eCryptfs super block flags. This flag is what the VFS
checks in do_last() when deciding if the current umask should be applied
to a newly created inode's mode or not. When a default POSIX ACL mask is
set on a directory, the current umask is incorrectly applied to new
inodes created in the directory. This patch ignores the MS_POSIXACL flag
passed into ecryptfs_mount() and sets the flag on the eCryptfs super
block depending on the flag's presence on the lower super block.

Additionally, it is incorrect to allow a writeable eCryptfs mount on top
of a read-only lower mount. This missing check did not allow writes to
the read-only lower mount because permissions checks are still performed
on the lower filesystem's objects but it is best to simply not allow a
rw mount on top of ro mount. However, a ro eCryptfs mount on top of a rw
mount is valid and still allowed.

https://launchpad.net/bugs/1009207

Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Reported-by: Stefan Beller <stefanbeller@googlemail.com>
Cc: John Johansen <john.johansen@canonical.com>
Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agousb: use usb_serial_put in usb_serial_probe errors
Jan Safrata [Tue, 22 May 2012 12:04:50 +0000]
usb: use usb_serial_put in usb_serial_probe errors

commit 0658a3366db7e27fa32c12e886230bb58c414c92 upstream.

The use of kfree(serial) in error cases of usb_serial_probe
was invalid - usb_serial structure allocated in create_serial()
gets reference of usb_device that needs to be put, so we need
to use usb_serial_put() instead of simple kfree().

Signed-off-by: Jan Safrata <jan.nikitenko@gmail.com>
Acked-by: Johan Hovold <jhovold@gmail.com>
Cc: Richard Retanubun <richardretanubun@ruggedcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agonetfilter: nf_nat: don't check for port change on ICMP tuples
Ulrich Weber [Thu, 25 Oct 2012 05:34:45 +0000]
netfilter: nf_nat: don't check for port change on ICMP tuples

commit 38fe36a248ec3228f8e6507955d7ceb0432d2000 upstream.

ICMP tuples have id in src and type/code in dst.
So comparing src.u.all with dst.u.all will always fail here
and ip_xfrm_me_harder() is called for every ICMP packet,
even if there was no NAT.

Signed-off-by: Ulrich Weber <ulrich.weber@sophos.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agonetfilter: Mark SYN/ACK packets as invalid from original direction
Jozsef Kadlecsik [Fri, 31 Aug 2012 09:55:53 +0000]
netfilter: Mark SYN/ACK packets as invalid from original direction

commit 64f509ce71b08d037998e93dd51180c19b2f464c upstream.

Clients should not send such packets. By accepting them, we open
up a hole by wich ephemeral ports can be discovered in an off-path
attack.

See: "Reflection scan: an Off-Path Attack on TCP" by Jan Wrobel,
http://arxiv.org/abs/1201.2074

Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agonetfilter: Validate the sequence number of dataless ACK packets as well
Jozsef Kadlecsik [Fri, 31 Aug 2012 09:55:54 +0000]
netfilter: Validate the sequence number of dataless ACK packets as well

commit 4a70bbfaef0361d27272629d1a250a937edcafe4 upstream.

We spare nothing by not validating the sequence number of dataless
ACK packets and enabling it makes harder off-path attacks.

See: "Reflection scan: an Off-Path Attack on TCP" by Jan Wrobel,
http://arxiv.org/abs/1201.2074

Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agor8169: allow multicast packets on sub-8168f chipset.
Nathan Walp [Thu, 1 Nov 2012 12:08:47 +0000]
r8169: allow multicast packets on sub-8168f chipset.

commit 0481776b7a70f09acf7d9d97c288c3a8403fbfe4 upstream.

RTL_GIGA_MAC_VER_35 includes no multicast hardware filter.

Signed-off-by: Nathan Walp <faceprint@faceprint.com>
Suggested-by: Hayes Wang <hayeswang@realtek.com>
Acked-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agor8169: Fix WoL on RTL8168d/8111d.
Cyril Brulebois [Wed, 31 Oct 2012 14:00:46 +0000]
r8169: Fix WoL on RTL8168d/8111d.

commit b00e69dee4ccbb3a19989e3d4f1385bc2e3406cd upstream.

This regression was spotted between Debian squeeze and Debian wheezy
kernels (respectively based on 2.6.32 and 3.2). More info about
Wake-on-LAN issues with Realtek's 816x chipsets can be found in the
following thread: http://marc.info/?t=132079219400004

Probable regression from d4ed95d796e5126bba51466dc07e287cebc8bd19;
more chipsets are likely affected.

Tested on top of a 3.2.23 kernel.

Reported-by: Florent Fourcot <florent.fourcot@enst-bretagne.fr>
Tested-by: Florent Fourcot <florent.fourcot@enst-bretagne.fr>
Hinted-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Cyril Brulebois <kibi@debian.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoxen/events: fix RCU warning, or Call idle notifier after irq_enter()
Mojiong Qiu [Tue, 6 Nov 2012 08:08:15 +0000]
xen/events: fix RCU warning, or Call idle notifier after irq_enter()

commit 772aebcefeff310f80e32b874988af0076cb799d upstream.

exit_idle() should be called after irq_enter(), otherwise it throws:

[ INFO: suspicious RCU usage. ]
3.6.5 #1 Not tainted
-------------------------------
include/linux/rcupdate.h:725 rcu_read_lock() used illegally while idle!

other info that might help us debug this:

RCU used illegally from idle CPU!
rcu_scheduler_active = 1, debug_locks = 1
RCU used illegally from extended quiescent state!
1 lock held by swapper/0/0:
 #0:  (rcu_read_lock){......}, at: [<ffffffff810e9fe0>] __atomic_notifier_call_chain+0x0/0x140

stack backtrace:
Pid: 0, comm: swapper/0 Not tainted 3.6.5 #1
Call Trace:
 <IRQ>  [<ffffffff811259a2>] lockdep_rcu_suspicious+0xe2/0x130
 [<ffffffff810ea10c>] __atomic_notifier_call_chain+0x12c/0x140
 [<ffffffff810e9fe0>] ? atomic_notifier_chain_unregister+0x90/0x90
 [<ffffffff811216cd>] ? trace_hardirqs_off+0xd/0x10
 [<ffffffff810ea136>] atomic_notifier_call_chain+0x16/0x20
 [<ffffffff810777c3>] exit_idle+0x43/0x50
 [<ffffffff81568865>] xen_evtchn_do_upcall+0x25/0x50
 [<ffffffff81aa690e>] xen_do_hypervisor_callback+0x1e/0x30
 <EOI>  [<ffffffff810013aa>] ? hypercall_page+0x3aa/0x1000
 [<ffffffff810013aa>] ? hypercall_page+0x3aa/0x1000
 [<ffffffff81061540>] ? xen_safe_halt+0x10/0x20
 [<ffffffff81075cfa>] ? default_idle+0xba/0x570
 [<ffffffff810778af>] ? cpu_idle+0xdf/0x140
 [<ffffffff81a4d881>] ? rest_init+0x135/0x144
 [<ffffffff81a4d74c>] ? csum_partial_copy_generic+0x16c/0x16c
 [<ffffffff82520c45>] ? start_kernel+0x3db/0x3e8
 [<ffffffff8252066a>] ? repair_env_string+0x5a/0x5a
 [<ffffffff82520356>] ? x86_64_start_reservations+0x131/0x135
 [<ffffffff82524aca>] ? xen_start_kernel+0x465/0x46

Git commit 98ad1cc14a5c4fd658f9d72c6ba5c86dfd3ce0d5
Author: Frederic Weisbecker <fweisbec@gmail.com>
Date:   Fri Oct 7 18:22:09 2011 +0200

    x86: Call idle notifier after irq_enter()

did this, but it missed the Xen code.

Signed-off-by: Mojiong Qiu <mjqiu@tencent.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agor8169: use unlimited DMA burst for TX
Michal Schmidt [Sun, 9 Sep 2012 13:55:26 +0000]
r8169: use unlimited DMA burst for TX

commit aee77e4accbeb2c86b1d294cd84fec4a12dde3bd upstream.

The r8169 driver currently limits the DMA burst for TX to 1024 bytes. I have
a box where this prevents the interface from using the gigabit line to its full
potential. This patch solves the problem by setting TX_DMA_BURST to unlimited.

The box has an ASRock B75M motherboard with on-board RTL8168evl/8111evl
(XID 0c900880). TSO is enabled.

I used netperf (TCP_STREAM test) to measure the dependency of TX throughput
on MTU. I did it for three different values of TX_DMA_BURST ('5'=512, '6'=1024,
'7'=unlimited). This chart shows the results:
http://michich.fedorapeople.org/r8169/r8169-effects-of-TX_DMA_BURST.png

Interesting points:
 - With the current DMA burst limit (1024):
   - at the default MTU=1500 I get only 842 Mbit/s.
   - when going from small MTU, the performance rises monotonically with
     increasing MTU only up to a peak at MTU=1076 (908 MBit/s). Then there's
     a sudden drop to 762 MBit/s from which the throughput rises monotonically
     again with further MTU increases.
 - With a smaller DMA burst limit (512):
   - there's a similar peak at MTU=1076 and another one at MTU=564.
 - With unlimited DMA burst:
   - at the default MTU=1500 I get nice 940 Mbit/s.
   - the throughput rises monotonically with increasing MTU with no strange
     peaks.

Notice that the peaks occur at MTU sizes that are multiples of the DMA burst
limit plus 52. Why 52? Because:
  20 (IP header) + 20 (TCP header) + 12 (TCP options) = 52

The Realtek-provided r8168 driver (v8.032.00) uses unlimited TX DMA burst too,
except for CFG_METHOD_1 where the TX DMA burst is set to 512 bytes.
CFG_METHOD_1 appears to be the oldest MAC version of "RTL8168B/8111B",
i.e. RTL_GIGA_MAC_VER_11 in r8169. Not sure if this MAC version really needs
the smaller burst limit, or if any other versions have similar requirements.

Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Acked-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agotmpfs: change final i_blocks BUG to WARNING
Hugh Dickins [Fri, 16 Nov 2012 22:15:04 +0000]
tmpfs: change final i_blocks BUG to WARNING

commit 0f3c42f522dc1ad7e27affc0a4aa8c790bce0a66 upstream.

Under a particular load on one machine, I have hit shmem_evict_inode()'s
BUG_ON(inode->i_blocks), enough times to narrow it down to a particular
race between swapout and eviction.

It comes from the "if (freed > 0)" asymmetry in shmem_recalc_inode(),
and the lack of coherent locking between mapping's nrpages and shmem's
swapped count.  There's a window in shmem_writepage(), between lowering
nrpages in shmem_delete_from_page_cache() and then raising swapped
count, when the freed count appears to be +1 when it should be 0, and
then the asymmetry stops it from being corrected with -1 before hitting
the BUG.

One answer is coherent locking: using tree_lock throughout, without
info->lock; reasonable, but the raw_spin_lock in percpu_counter_add() on
used_blocks makes that messier than expected.  Another answer may be a
further effort to eliminate the weird shmem_recalc_inode() altogether,
but previous attempts at that failed.

So far undecided, but for now change the BUG_ON to WARN_ON: in usual
circumstances it remains a useful consistency check.

Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agonet-rps: Fix brokeness causing OOO packets
Tom Herbert [Fri, 16 Nov 2012 09:04:15 +0000]
net-rps: Fix brokeness causing OOO packets

[ Upstream commit baefa31db2f2b13a05d1b81bdf2d20d487f58b0a ]

In commit c445477d74ab3779 which adds aRFS to the kernel, the CPU
selected for RFS is not set correctly when CPU is changing.
This is causing OOO packets and probably other issues.

Signed-off-by: Tom Herbert <therbert@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agonet: correct check in dev_addr_del()
Jiri Pirko [Wed, 14 Nov 2012 02:51:04 +0000]
net: correct check in dev_addr_del()

[ Upstream commit a652208e0b52c190e57f2a075ffb5e897fe31c3b ]

Check (ha->addr == dev->dev_addr) is always true because dev_addr_init()
sets this. Correct the check to behave properly on addr removal.

Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoipv6: setsockopt(IPIPPROTO_IPV6, IPV6_MINHOPCOUNT) forgot to set return value
Hannes Frederic Sowa [Sat, 10 Nov 2012 19:52:34 +0000]
ipv6: setsockopt(IPIPPROTO_IPV6, IPV6_MINHOPCOUNT) forgot to set return value

[ Upstream commit d4596bad2a713fcd0def492b1960e6d899d5baa8 ]

Cc: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoipv4: avoid undefined behavior in do_ip_setsockopt()
Xi Wang [Sun, 11 Nov 2012 11:20:01 +0000]
ipv4: avoid undefined behavior in do_ip_setsockopt()

[ Upstream commit 0c9f79be295c99ac7e4b569ca493d75fdcc19e4e ]

(1<<optname) is undefined behavior in C with a negative optname or
optname larger than 31.  In those cases the result of the shift is
not necessarily zero (e.g., on x86).

This patch simplifies the code with a switch statement on optname.
It also allows the compiler to generate better code (e.g., using a
64-bit mask).

Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agom68k: fix sigset_t accessor functions
Andreas Schwab [Sat, 17 Nov 2012 21:27:04 +0000]
m68k: fix sigset_t accessor functions

commit 34fa78b59c52d1db3513db4c1a999db26b2e9ac2 upstream.

The sigaddset/sigdelset/sigismember functions that are implemented with
bitfield insn cannot allow the sigset argument to be placed in a data
register since the sigset is wider than 32 bits.  Remove the "d"
constraint from the asm statements.

The effect of the bug is that sending RT signals does not work, the signal
number is truncated modulo 32.

Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agowireless: allow 40 MHz on world roaming channels 12/13
Johannes Berg [Mon, 12 Nov 2012 09:51:34 +0000]
wireless: allow 40 MHz on world roaming channels 12/13

commit 43c771a1963ab461a2f194e3c97fded1d5fe262f upstream.

When in world roaming mode, allow 40 MHz to be used
on channels 12 and 13 so that an AP that is, e.g.,
using HT40+ on channel 9 (in the UK) can be used.

Reported-by: Eddie Chapman <eddie@ehuk.net>
Tested-by: Eddie Chapman <eddie@ehuk.net>
Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agomemcg: oom: fix totalpages calculation for memory.swappiness==0
Michal Hocko [Fri, 16 Nov 2012 22:14:49 +0000]
memcg: oom: fix totalpages calculation for memory.swappiness==0

commit 9a5a8f19b43430752067ecaee62fc59e11e88fa6 upstream.

oom_badness() takes a totalpages argument which says how many pages are
available and it uses it as a base for the score calculation.  The value
is calculated by mem_cgroup_get_limit which considers both limit and
total_swap_pages (resp.  memsw portion of it).

This is usually correct but since fe35004fbf9e ("mm: avoid swapping out
with swappiness==0") we do not swap when swappiness is 0 which means
that we cannot really use up all the totalpages pages.  This in turn
confuses oom score calculation if the memcg limit is much smaller than
the available swap because the used memory (capped by the limit) is
negligible comparing to totalpages so the resulting score is too small
if adj!=0 (typically task with CAP_SYS_ADMIN or non zero oom_score_adj).
A wrong process might be selected as result.

The problem can be worked around by checking mem_cgroup_swappiness==0
and not considering swap at all in such a case.

Signed-off-by: Michal Hocko <mhocko@suse.cz>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agottm: Clear the ttm page allocated from high memory zone correctly
Zhao Yakui [Tue, 13 Nov 2012 18:31:55 +0000]
ttm: Clear the ttm page allocated from high memory zone correctly

commit ac207ed2471150e06af0afc76e4becc701fa2733 upstream.

The TTM page can be allocated from high memory. In such case it is
wrong to use the page_address(page) as the virtual address for the high memory
page.

bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=50241

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agodrm/radeon: fix logic error in atombios_encoders.c
Alex Deucher [Wed, 14 Nov 2012 14:10:39 +0000]
drm/radeon: fix logic error in atombios_encoders.c

commit b9196395c905edec512dfd6690428084228c16ec upstream.

Fixes:
https://bugzilla.kernel.org/show_bug.cgi?id=50431

Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoUSB: option: add Alcatel X220/X500D USB IDs
Dan Williams [Thu, 8 Nov 2012 17:56:53 +0000]
USB: option: add Alcatel X220/X500D USB IDs

commit c0bc3098871dd9b964f6b45ec1e4d70d87811744 upstream.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoUSB: option: add Novatel E362 and Dell Wireless 5800 USB IDs
Dan Williams [Thu, 8 Nov 2012 17:56:42 +0000]
USB: option: add Novatel E362 and Dell Wireless 5800 USB IDs

commit fcb21645f1bd86d2be29baf48aa1b298de52ccc7 upstream.

The Dell 5800 appears to be a simple rebrand of the Novatel E362.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agos390/gup: add missing TASK_SIZE check to get_user_pages_fast()
Heiko Carstens [Mon, 22 Oct 2012 13:49:02 +0000]
s390/gup: add missing TASK_SIZE check to get_user_pages_fast()

commit d55c4c613fc4d4ad2ba0fc6fa2b57176d420f7e4 upstream.

When walking page tables we need to make sure that everything
is within bounds of the ASCE limit of the task's address space.
Otherwise we might calculate e.g. a pud pointer which is not
within a pud and dereference it.
So check against TASK_SIZE (which is the ASCE limit) before
walking page tables.

Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoRevert "Staging: Android alarm: IOCTL command encoding fix"
Colin Cross [Thu, 8 Nov 2012 02:21:51 +0000]
Revert "Staging: Android alarm: IOCTL command encoding fix"

commit d38e0e3fed4f58bcddef4dc93a591dfe2f651cb0 upstream.

Commit 6bd4a5d96c08dc2380f8053b1bd4f879f55cd3c9 changed the
ANDROID_ALARM_GET_TIME ioctls from IOW to IOR.  While technically
correct, the _IOC_DIR bits are ignored by alarm_ioctl, so the
commit breaks a userspace ABI used by all existing Android devices
for a purely cosmetic reason.  Revert it.

Cc: Dae S. Kim <dae@velatum.com>
Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoUBIFS: introduce categorized lprops counter
Artem Bityutskiy [Wed, 10 Oct 2012 07:55:28 +0000]
UBIFS: introduce categorized lprops counter

commit 98a1eebda3cb2a84ecf1f219bb3a95769033d1bf upstream.

This commit is a preparation for a subsequent bugfix. We introduce a
counter for categorized lprops.

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoUBIFS: fix mounting problems after power cuts
Artem Bityutskiy [Tue, 9 Oct 2012 13:20:15 +0000]
UBIFS: fix mounting problems after power cuts

commit a28ad42a4a0c6f302f488f26488b8b37c9b30024 upstream.

This is a bugfix for a problem with the following symptoms:

1. A power cut happens
2. After reboot, we try to mount UBIFS
3. Mount fails with "No space left on device" error message

UBIFS complains like this:

UBIFS error (pid 28225): grab_empty_leb: could not find an empty LEB

The root cause of this problem is that when we mount, not all LEBs are
categorized. Only those which were read are. However, the
'ubifs_find_free_leb_for_idx()' function assumes that all LEBs were
categorized and 'c->freeable_cnt' is valid, which is a false assumption.

This patch fixes the problem by teaching 'ubifs_find_free_leb_for_idx()'
to always fall back to LPT scanning if no freeable LEBs were found.

This problem was reported by few people in the past, but Brent Taylor
was able to reproduce it and send me a flash image which cannot be mounted,
which made it easy to hunt the bug. Kudos to Brent.

Reported-by: Brent Taylor <motobud@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoASoC: dapm: Use card_list during DAPM shutdown
Misael Lopez Cruz [Thu, 8 Nov 2012 18:03:12 +0000]
ASoC: dapm: Use card_list during DAPM shutdown

commit 445632ad6dda42f4d3f9df2569a852ca0d4ea608 upstream.

DAPM shutdown incorrectly uses "list" field of codec struct while
iterating over probed components (codec_dev_list). "list" field
refers to codecs registered in the system, "card_list" field is
used for probed components.

Signed-off-by: Misael Lopez Cruz <misael.lopez@ti.com>
Signed-off-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoASoC: wm8978: pll incorrectly configured when codec is master
Eric Millbrandt [Fri, 2 Nov 2012 21:05:44 +0000]
ASoC: wm8978: pll incorrectly configured when codec is master

commit 55c6f4cb6ef49afbb86222c6a3ff85329199c729 upstream.

When MCLK is supplied externally and BCLK and LRC are configured as outputs
(codec is master), the PLL values are only calculated correctly on the first
transmission.  On subsequent transmissions, at differenct sample rates, the
wrong PLL values are used.  Test for f_opclk instead of f_pllout to determine
if the PLL values are needed.

Signed-off-by: Eric Millbrandt <emillbrandt@dekaresearch.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoALSA: hda - Add a missing quirk entry for iMac 9,1
Takashi Iwai [Mon, 12 Nov 2012 09:07:36 +0000]
ALSA: hda - Add a missing quirk entry for iMac 9,1

commit 05193639ca977cc889668718adb38db6d585045b upstream.

This is another variant of iMac 9,1 with a different codec SSID.

Reported-and-tested-by: Everaldo Canuto <everaldo.canuto@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoALSA: hda - Add new codec ALC668 and ALC900 (default name ALC1150)
Kailang Yang [Thu, 8 Nov 2012 09:25:37 +0000]
ALSA: hda - Add new codec ALC668 and ALC900 (default name ALC1150)

commit 19a62823eae453619604636082085812c14ee391 upstream.

Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoALSA: hda - Fix invalid connections in VT1802 codec
Takashi Iwai [Wed, 7 Nov 2012 09:37:48 +0000]
ALSA: hda - Fix invalid connections in VT1802 codec

commit ef4da45828603df57e5e21b8aa21a66ce309f79b upstream.

VT1802 codec provides the invalid connection lists of NID 0x24 and
0x33 containing the routes to a non-exist widget 0x3e.  This confuses
the auto-parser.  Fix it up in the driver by overriding these
connections.

Reported-by: Massimo Del Fedele <max@veneto.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoALSA: hda - Fix empty DAC filling in patch_via.c
Takashi Iwai [Wed, 7 Nov 2012 09:32:47 +0000]
ALSA: hda - Fix empty DAC filling in patch_via.c

commit 5b3761954dac2d1393beef8210eb8cee81d16b8d upstream.

In via_auto_fill_adc_nids(), the parser tries to fill dac_nids[] at
the point of the current line-out (i).  When no valid path is found
for this output, this results in dac = 0, thus it creates a hole in
dac_nids[].  This confuses is_empty_dac() and trims the detected DAC
in later reference.

This patch fixes the bug by appending DAC properly to dac_nids[] in
via_auto_fill_adc_nids().

Reported-by: Massimo Del Fedele <max@veneto.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoALSA: hda - Force to reset IEC958 status bits for AD codecs
Takashi Iwai [Mon, 5 Nov 2012 11:32:46 +0000]
ALSA: hda - Force to reset IEC958 status bits for AD codecs

commit ae24c3191ba2ab03ec6b4be323e730e00404b4b6 upstream.

Several bug reports suggest that the forcibly resetting IEC958 status
bits is required for AD codecs to get the SPDIF output working
properly after changing streams.

Original fix credit to Javeed Shaikh.

BugLink: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/359361

Reported-by: Robin Kreis <r.kreis@uni-bremen.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoALSA: HDA: Fix digital microphone on CS420x
Daniel J Blueman [Sun, 4 Nov 2012 05:19:03 +0000]
ALSA: HDA: Fix digital microphone on CS420x

commit 16337e028a6dae9fbdd718c0d42161540a668ff3 upstream.

Correctly enable the digital microphones with the right bits in the
right coeffecient registers on Cirrus CS4206/7 codecs. It also
prevents misconfiguring ADC1/2.

This fixes the digital mic on the Macbook Pro 10,1/Retina.

Based-on-patch-by: Alexander Stein <alexander.stein@systec-electronic.com>
Signed-off-by: Daniel J Blueman <daniel@quora.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoALSA: hda: Cirrus: Fix coefficient index for beep configuration
Alexander Stein [Thu, 1 Nov 2012 12:42:37 +0000]
ALSA: hda: Cirrus: Fix coefficient index for beep configuration

commit 5a83b4b5a391f07141b157ac9daa51c409e71ab5 upstream.

Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agocrypto: cryptd - disable softirqs in cryptd_queue_worker to prevent data corruption
Jussi Kivilinna [Sun, 21 Oct 2012 17:42:28 +0000]
crypto: cryptd - disable softirqs in cryptd_queue_worker to prevent data corruption

commit 9efade1b3e981f5064f9db9ca971b4dc7557ae42 upstream.

cryptd_queue_worker attempts to prevent simultaneous accesses to crypto
workqueue by cryptd_enqueue_request using preempt_disable/preempt_enable.
However cryptd_enqueue_request might be called from softirq context,
so add local_bh_disable/local_bh_enable to prevent data corruption and
panics.

Bug report at http://marc.info/?l=linux-crypto-vger&m=134858649616319&w=2

v2:
 - Disable software interrupts instead of hardware interrupts

Reported-by: Gurucharan Shetty <gurucharan.shetty@gmail.com>
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agocifs: fix potential buffer overrun in cifs.idmap handling code
Jeff Layton [Sat, 3 Nov 2012 13:37:28 +0000]
cifs: fix potential buffer overrun in cifs.idmap handling code

commit 36960e440ccf94349c09fb944930d3bfe4bc473f upstream.

The userspace cifs.idmap program generally works with the wbclient libs
to generate binary SIDs in userspace. That program defines the struct
that holds these values as having a max of 15 subauthorities. The kernel
idmapping code however limits that value to 5.

When the kernel copies those values around though, it doesn't sanity
check the num_subauths value handed back from userspace or from the
server. It's possible therefore for userspace to hand us back a bogus
num_subauths value (or one that's valid, but greater than 5) that could
cause the kernel to walk off the end of the cifs_sid->sub_auths array.

Fix this by defining a new routine for copying sids and using that in
all of the places that copy it. If we end up with a sid that's longer
than expected then this approach will just lop off the "extra" subauths,
but that's basically what the code does today already. Better approaches
might be to fix this code to reject SIDs with >5 subauths, or fix it
to handle the subauths array dynamically.

At the same time, change the kernel to check the length of the data
returned by userspace. If it's shorter than struct cifs_sid, reject it
and return -EIO. If that happens we'll end up with fields that are
basically uninitialized.

Long term, it might make sense to redefine cifs_sid using a flexarray at
the end, to allow for variable-length subauth lists, and teach the code
to handle the case where the subauths array being passed in from
userspace is shorter than 5 elements.

Note too, that I don't consider this a security issue since you'd need
a compromised cifs.idmap program. If you have that, you can do all sorts
of nefarious stuff. Still, this is probably reasonable for stable.

Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agomodule: fix out-by-one error in kallsyms
Rusty Russell [Thu, 25 Oct 2012 00:19:25 +0000]
module: fix out-by-one error in kallsyms

commit 59ef28b1f14899b10d6b2682c7057ca00a9a3f47 upstream.

Masaki found and patched a kallsyms issue: the last symbol in a
module's symtab wasn't transferred.  This is because we manually copy
the zero'th entry (which is always empty) then copy the rest in a loop
starting at 1, though from src[0].  His fix was minimal, I prefer to
rewrite the loops in more standard form.

There are two loops: one to get the size, and one to copy.  Make these
identical: always count entry 0 and any defined symbol in an allocated
non-init section.

This bug exists since the following commit was introduced.
   module: reduce symbol table for loaded modules (v2)
   commit: 4a4962263f07d14660849ec134ee42b63e95ea9a

LKML: http://lkml.org/lkml/2012/10/24/27
Reported-by: Masaki Kimura <masaki.kimura.kz@hitachi.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agofanotify: fix missing break
Eric Paris [Thu, 8 Nov 2012 23:53:37 +0000]
fanotify: fix missing break

commit 848561d368751a1c0f679b9f045a02944506a801 upstream.

Anders Blomdell noted in 2010 that Fanotify lost events and provided a
test case.  Eric Paris confirmed it was a bug and posted a fix to the
list

  https://groups.google.com/forum/?fromgroups=#!topic/linux.kernel/RrJfTfyW2BE

but never applied it.  Repeated attempts over time to actually get him
to apply it have never had a reply from anyone who has raised it

So apply it anyway

Signed-off-by: Alan Cox <alan@linux.intel.com>
Reported-by: Anders Blomdell <anders.blomdell@control.lth.se>
Cc: Eric Paris <eparis@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agomac80211: call skb_dequeue/ieee80211_free_txskb instead of __skb_queue_purge
Felix Fietkau [Sat, 10 Nov 2012 02:44:14 +0000]
mac80211: call skb_dequeue/ieee80211_free_txskb instead of __skb_queue_purge

commit 1f98ab7fef48a2968f37f422c256c9fbd978c3f0 upstream.

Fixes more wifi status skb leaks, leading to hostapd/wpa_supplicant hangs.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agomac80211: don't send null data packet when not associated
Johannes Berg [Thu, 8 Nov 2012 13:06:28 +0000]
mac80211: don't send null data packet when not associated

commit 20f544eea03db4b498942558b882d463ce575c3e upstream.

On resume or firmware recovery, mac80211 sends a null
data packet to see if the AP is still around and hasn't
disconnected us. However, it always does this even if
it wasn't even connected before, leading to a warning
in the new channel context code. Fix this by checking
that it's associated.

Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agomac80211: sync acccess to tx_filtered/ps_tx_buf queues
Arik Nemtsov [Mon, 5 Nov 2012 08:27:52 +0000]
mac80211: sync acccess to tx_filtered/ps_tx_buf queues

commit 987c285c2ae2e4e32aca3a9b3252d28171c75711 upstream.

These are accessed without a lock when ending STA PSM. If the
sta_cleanup timer accesses these lists at the same time, we might crash.

This may fix some mysterious crashes we had during
ieee80211_sta_ps_deliver_wakeup.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Ido Yariv <ido@wizery.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoxfs: drop buffer io reference when a bad bio is built
Dave Chinner [Mon, 12 Nov 2012 11:09:46 +0000]
xfs: drop buffer io reference when a bad bio is built

commit d69043c42d8c6414fa28ad18d99973aa6c1c2e24 upstream.

Error handling in xfs_buf_ioapply_map() does not handle IO reference
counts correctly. We increment the b_io_remaining count before
building the bio, but then fail to decrement it in the failure case.
This leads to the buffer never running IO completion and releasing
the reference that the IO holds, so at unmount we can leak the
buffer. This leak is captured by this assert failure during unmount:

XFS: Assertion failed: atomic_read(&pag->pag_ref) == 0, file: fs/xfs/xfs_mount.c, line: 273

This is not a new bug - the b_io_remaining accounting has had this
problem for a long, long time - it's just very hard to get a
zero length bio being built by this code...

Further, the buffer IO error can be overwritten on a multi-segment
buffer by subsequent bio completions for partial sections of the
buffer. Hence we should only set the buffer error status if the
buffer is not already carrying an error status. This ensures that a
partial IO error on a multi-segment buffer will not be lost. This
part of the problem is a regression, however.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agomm: bugfix: set current->reclaim_state to NULL while returning from kswapd()
Takamori Yamaguchi [Thu, 8 Nov 2012 23:53:39 +0000]
mm: bugfix: set current->reclaim_state to NULL while returning from kswapd()

commit b0a8cc58e6b9aaae3045752059e5e6260c0b94bc upstream.

In kswapd(), set current->reclaim_state to NULL before returning, as
current->reclaim_state holds reference to variable on kswapd()'s stack.

In rare cases, while returning from kswapd() during memory offlining,
__free_slab() and freepages() can access the dangling pointer of
current->reclaim_state.

Signed-off-by: Takamori Yamaguchi <takamori.yamaguchi@jp.sony.com>
Signed-off-by: Aaditya Kumar <aaditya.kumar@ap.sony.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoLinux 3.4.19
Greg Kroah-Hartman [Sat, 17 Nov 2012 21:16:56 +0000]
Linux 3.4.19

6 years agoALSA: usb-audio: Fix mutex deadlock at disconnection
Takashi Iwai [Tue, 13 Nov 2012 10:22:48 +0000]
ALSA: usb-audio: Fix mutex deadlock at disconnection

commit 10e44239f67d0b6fb74006e61a7e883b8075247a upstream.

The recent change for USB-audio disconnection race fixes introduced a
mutex deadlock again.  There is a circular dependency between
chip->shutdown_rwsem and pcm->open_mutex, depicted like below, when a
device is opened during the disconnection operation:

A. snd_usb_audio_disconnect() ->
     card.c::register_mutex ->
       chip->shutdown_rwsem (write) ->
         snd_card_disconnect() ->
           pcm.c::register_mutex ->
             pcm->open_mutex

B. snd_pcm_open() ->
     pcm->open_mutex ->
       snd_usb_pcm_open() ->
         chip->shutdown_rwsem (read)

Since the chip->shutdown_rwsem protection in the case A is required
only for turning on the chip->shutdown flag and it doesn't have to be
taken for the whole operation, we can reduce its window in
snd_usb_audio_disconnect().

Reported-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoALSA: Fix card refcount unbalance
Takashi Iwai [Thu, 8 Nov 2012 13:36:18 +0000]
ALSA: Fix card refcount unbalance

commit 8bb4d9ce08b0a92ca174e41d92c180328f86173f upstream.

There are uncovered cases whether the card refcount introduced by the
commit a0830dbd isn't properly increased or decreased:
- OSS PCM and mixer success paths
- When lookup function gets NULL

This patch fixes these places.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=50251

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoxfs: fix reading of wrapped log data
Dave Chinner [Fri, 2 Nov 2012 00:38:44 +0000]
xfs: fix reading of wrapped log data

commit 6ce377afd1755eae5c93410ca9a1121dfead7b87 upstream.

Commit 4439647 ("xfs: reset buffer pointers before freeing them") in
3.0-rc1 introduced a regression when recovering log buffers that
wrapped around the end of log. The second part of the log buffer at
the start of the physical log was being read into the header buffer
rather than the data buffer, and hence recovery was seeing garbage
in the data buffer when it got to the region of the log buffer that
was incorrectly read.

Reported-by: Torsten Kaiser <just.for.lkml@googlemail.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoUSB: mos7840: remove unused variable
Johan Hovold [Thu, 8 Nov 2012 17:28:59 +0000]
USB: mos7840: remove unused variable

Fix warning about unused variable introduced by commit e681b66f2e19fa
("USB: mos7840: remove invalid disconnect handling") upstream.

A subsequent fix which removed the disconnect function got rid of the
warning but that one was only backported to v3.6.

Reported-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agodrm/i915: clear the entire sdvo infoframe buffer
Daniel Vetter [Sun, 21 Oct 2012 10:52:39 +0000]
drm/i915: clear the entire sdvo infoframe buffer

commit b6e0e543f75729f207b9c72b0162ae61170635b2 upstream.

Like in the case of native hdmi, which is fixed already in

commit adf00b26d18e1b3570451296e03bcb20e4798cdd
Author: Paulo Zanoni <paulo.r.zanoni@intel.com>
Date:   Tue Sep 25 13:23:34 2012 -0300

    drm/i915: make sure we write all the DIP data bytes

we need to clear the entire sdvo buffer to avoid upsetting the
display.

Since infoframe buffer writing is now a bit more elaborate, extract it
into it's own function. This will be useful if we ever get around to
properly update the ELD for sdvo. Also #define proper names for the
two buffer indexes with fixed usage.

v2: Cite the right commit above, spotted by Paulo Zanoni.

v3: I'm too stupid to paste the right commit.

v4: Ben Hutchings noticed that I've failed to handle an underflow in
my loop logic, breaking it for i >= length + 8. Since I've just lost C
programmer license, use his solution. Also, make the frustrated 0-base
buffer size a notch more clear.

Reported-and-tested-by: Jürg Billeter <j@bitron.ch>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=25732
Cc: Paulo Zanoni <przanoni@gmail.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agodrm/i915: fixup infoframe support for sdvo
Daniel Vetter [Sat, 12 May 2012 18:22:00 +0000]
drm/i915: fixup infoframe support for sdvo

commit 81014b9d0b55fb0b48f26cd2a943359750d532db upstream.

At least the worst offenders:
- SDVO specifies that the encoder should compute the ecc. Testing also
  shows that we must not send the ecc field, so copy the dip_infoframe
  struct to a temporay place and avoid the ecc field. This way the avi
  infoframe is exactly 17 bytes long, which agrees with what the spec
  mandates as a minimal storage capacity (with the ecc field it would
  be 18 bytes).
- Only 17 when sending the avi infoframe. The SDVO spec explicitly
  says that sending more data than what the device announces results
  in undefined behaviour.
- Add __attribute__((packed)) to the avi and spd infoframes, for
  otherwise they're wrongly aligned. Noticed because the avi infoframe
  ended up being 18 bytes large instead of 17. We haven't noticed this
  yet because we don't use the uint16_t fields yet (which are the only
  ones that would be wrongly aligned).

This regression has been introduce by

3c17fe4b8f40a112a85758a9ab2aebf772bdd647 is the first bad commit
commit 3c17fe4b8f40a112a85758a9ab2aebf772bdd647
Author: David Härdeman <david@hardeman.nu>
Date:   Fri Sep 24 21:44:32 2010 +0200

    i915: enable AVI infoframe for intel_hdmi.c [v4]

Patch tested on my g33 with a sdvo hdmi adaptor.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=25732
Tested-by: Peter Ross <pross@xvid.org> (G35 SDVO-HDMI)
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agodrm/radeon/si: add some missing regs to the VM reg checker
Alex Deucher [Thu, 8 Nov 2012 15:13:24 +0000]
drm/radeon/si: add some missing regs to the VM reg checker

commit f418b88aad0c42b4caf4d79a0cf8d14a5d0a2284 upstream.

This register is needed for streamout to work properly.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agodrm/radeon/cayman: add some missing regs to the VM reg checker
Alex Deucher [Thu, 8 Nov 2012 15:08:04 +0000]
drm/radeon/cayman: add some missing regs to the VM reg checker

commit 860fe2f05fa2eacac84368e23547ec8cf3cc6652 upstream.

These regs were being wronly rejected leading to rendering
issues.

fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=56876

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agodrm/vmwgfx: Fix a case where the code would BUG when trying to pin GMR memory
Thomas Hellstrom [Fri, 9 Nov 2012 09:45:14 +0000]
drm/vmwgfx: Fix a case where the code would BUG when trying to pin GMR memory

commit afcc87aa6a233e52df73552dc1dc9ae3881b7cc8 upstream.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Dmitry Torokhov <dtor@vmware.com>
Cc: linux-graphics-maintainer@vmware.com
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agodrm/vmwgfx: Fix hibernation device reset
Thomas Hellstrom [Fri, 9 Nov 2012 09:05:57 +0000]
drm/vmwgfx: Fix hibernation device reset

commit 95e8f6a21996c4cc2c4574b231c6e858b749dce3 upstream.

The device would not reset properly when resuming from hibernation.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Dmitry Torokhov <dtor@vmware.com>
Cc: linux-graphics-maintainer@vmware.com
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agommc: sdhci: fix NULL dereference in sdhci_request() tuning
Chris Ball [Mon, 5 Nov 2012 19:29:49 +0000]
mmc: sdhci: fix NULL dereference in sdhci_request() tuning

commit 14efd957209461bbdf285bf0d67e931955d04a4c upstream.

Commit 473b095a72a9 ("mmc: sdhci: fix incorrect command used in tuning")
introduced a NULL dereference at resume-time if an SD 3.0 host controller
raises the SDHCI_NEEDS_TUNING flag while no card is inserted.  Seen on an
OLPC XO-4 with sdhci-pxav3, but presumably affects other controllers too.

Signed-off-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agofutex: Handle futex_pi OWNER_DIED take over correctly
Thomas Gleixner [Tue, 23 Oct 2012 20:29:38 +0000]
futex: Handle futex_pi OWNER_DIED take over correctly

commit 59fa6245192159ab5e1e17b8e31f15afa9cff4bf upstream.

Siddhesh analyzed a failure in the take over of pi futexes in case the
owner died and provided a workaround.
See: http://sourceware.org/bugzilla/show_bug.cgi?id=14076

The detailed problem analysis shows:

Futex F is initialized with PTHREAD_PRIO_INHERIT and
PTHREAD_MUTEX_ROBUST_NP attributes.

T1 lock_futex_pi(F);

T2 lock_futex_pi(F);
   --> T2 blocks on the futex and creates pi_state which is associated
       to T1.

T1 exits
   --> exit_robust_list() runs
       --> Futex F userspace value TID field is set to 0 and
           FUTEX_OWNER_DIED bit is set.

T3 lock_futex_pi(F);
   --> Succeeds due to the check for F's userspace TID field == 0
   --> Claims ownership of the futex and sets its own TID into the
       userspace TID field of futex F
   --> returns to user space

T1 --> exit_pi_state_list()
       --> Transfers pi_state to waiter T2 and wakes T2 via
           rt_mutex_unlock(&pi_state->mutex)

T2 --> acquires pi_state->mutex and gains real ownership of the
       pi_state
   --> Claims ownership of the futex and sets its own TID into the
       userspace TID field of futex F
   --> returns to user space

T3 --> observes inconsistent state

This problem is independent of UP/SMP, preemptible/non preemptible
kernels, or process shared vs. private. The only difference is that
certain configurations are more likely to expose it.

So as Siddhesh correctly analyzed the following check in
futex_lock_pi_atomic() is the culprit:

if (unlikely(ownerdied || !(curval & FUTEX_TID_MASK))) {

We check the userspace value for a TID value of 0 and take over the
futex unconditionally if that's true.

AFAICT this check is there as it is correct for a different corner
case of futexes: the WAITERS bit became stale.

Now the proposed change

- if (unlikely(ownerdied || !(curval & FUTEX_TID_MASK))) {
+       if (unlikely(ownerdied ||
+                       !(curval & (FUTEX_TID_MASK | FUTEX_WAITERS)))) {

solves the problem, but it's not obvious why and it wreckages the
"stale WAITERS bit" case.

What happens is, that due to the WAITERS bit being set (T2 is blocked
on that futex) it enforces T3 to go through lookup_pi_state(), which
in the above case returns an existing pi_state and therefor forces T3
to legitimately fight with T2 over the ownership of the pi_state (via
pi_state->mutex). Probelm solved!

Though that does not work for the "WAITERS bit is stale" problem
because if lookup_pi_state() does not find existing pi_state it
returns -ERSCH (due to TID == 0) which causes futex_lock_pi() to
return -ESRCH to user space because the OWNER_DIED bit is not set.

Now there is a different solution to that problem. Do not look at the
user space value at all and enforce a lookup of possibly available
pi_state. If pi_state can be found, then the new incoming locker T3
blocks on that pi_state and legitimately races with T2 to acquire the
rt_mutex and the pi_state and therefor the proper ownership of the
user space futex.

lookup_pi_state() has the correct order of checks. It first tries to
find a pi_state associated with the user space futex and only if that
fails it checks for futex TID value = 0. If no pi_state is available
nothing can create new state at that point because this happens with
the hash bucket lock held.

So the above scenario changes to:

T1 lock_futex_pi(F);

T2 lock_futex_pi(F);
   --> T2 blocks on the futex and creates pi_state which is associated
       to T1.

T1 exits
   --> exit_robust_list() runs
       --> Futex F userspace value TID field is set to 0 and
           FUTEX_OWNER_DIED bit is set.

T3 lock_futex_pi(F);
   --> Finds pi_state and blocks on pi_state->rt_mutex

T1 --> exit_pi_state_list()
       --> Transfers pi_state to waiter T2 and wakes it via
           rt_mutex_unlock(&pi_state->mutex)

T2 --> acquires pi_state->mutex and gains ownership of the pi_state
   --> Claims ownership of the futex and sets its own TID into the
       userspace TID field of futex F
   --> returns to user space

This covers all gazillion points on which T3 might come in between
T1's exit_robust_list() clearing the TID field and T2 fixing it up. It
also solves the "WAITERS bit stale" problem by forcing the take over.

Another benefit of changing the code this way is that it makes it less
dependent on untrusted user space values and therefor minimizes the
possible wreckage which might be inflicted.

As usual after staring for too long at the futex code my brain hurts
so much that I really want to ditch that whole optimization of
avoiding the syscall for the non contended case for PI futexes and rip
out the maze of corner case handling code. Unfortunately we can't as
user space relies on that existing behaviour, but at least thinking
about it helps me to preserve my mental sanity. Maybe we should
nevertheless :)

Reported-and-tested-by: Siddhesh Poyarekar <siddhesh.poyarekar@gmail.com>
Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1210232138540.2756@ionos
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoipv6: send unsolicited neighbour advertisements to all-nodes
Hannes Frederic Sowa [Tue, 6 Nov 2012 16:18:41 +0000]
ipv6: send unsolicited neighbour advertisements to all-nodes

[ Upstream commit 60713a0ca7fd6651b951cc1b4dbd528d1fc0281b ]

As documented in RFC4861 (Neighbor Discovery for IP version 6) 7.2.6.,
unsolicited neighbour advertisements should be sent to the all-nodes
multicast address.

Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoaf-packet: fix oops when socket is not present
Eric Leblond [Tue, 6 Nov 2012 02:10:10 +0000]
af-packet: fix oops when socket is not present

[ Upstream commit a3d744e995d2b936c500585ae39d99ee251c89b4 ]

Due to a NULL dereference, the following patch is causing oops
in normal trafic condition:

commit c0de08d04215031d68fa13af36f347a6cfa252ca
Author: Eric Leblond <eric@regit.org>
Date:   Thu Aug 16 22:02:58 2012 +0000

    af_packet: don't emit packet on orig fanout group

This buggy patch was a feature fix and has reached most stable
branches.

When skb->sk is NULL and when packet fanout is used, there is a
crash in match_fanout_group where skb->sk is accessed.
This patch fixes the issue by returning false as soon as the
socket is NULL: this correspond to the wanted behavior because
the kernel as to resend the skb to all the listening socket in
this case.

Signed-off-by: Eric Leblond <eric@regit.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agonet: inet_diag -- Return error code if protocol handler is missed
Cyrill Gorcunov [Sat, 3 Nov 2012 09:30:34 +0000]
net: inet_diag -- Return error code if protocol handler is missed

[ Upstream commit cacb6ba0f36ab14a507f4ee7697e8332899015d2 ]

We've observed that in case if UDP diag module is not
supported in kernel the netlink returns NLMSG_DONE without
notifying a caller that handler is missed.

This patch makes __inet_diag_dump to return error code instead.

So as example it become possible to detect such situation
and handle it gracefully on userspace level.

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
CC: David Miller <davem@davemloft.net>
CC: Eric Dumazet <eric.dumazet@gmail.com>
CC: Pavel Emelyanov <xemul@parallels.com>
Acked-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agol2tp: fix oops in l2tp_eth_create() error path
Tom Parkin [Mon, 29 Oct 2012 23:41:48 +0000]
l2tp: fix oops in l2tp_eth_create() error path

[ Upstream commit 789336360e0a2aeb9750c16ab704a02cbe035e9e ]

When creating an L2TPv3 Ethernet session, if register_netdev() should fail for
any reason (for example, automatic naming for "l2tpeth%d" interfaces hits the
32k-interface limit), the netdev is freed in the error path.  However, the
l2tp_eth_sess structure's dev pointer is left uncleared, and this results in
l2tp_eth_delete() then attempting to unregister the same netdev later in the
session teardown.  This results in an oops.

To avoid this, clear the session dev pointer in the error path.

Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agodrivers/net/ethernet/nxp/lpc_eth.c: Call mdiobus_unregister before mdiobus_free
Peter Senna Tschudin [Sun, 28 Oct 2012 06:12:00 +0000]
drivers/net/ethernet/nxp/lpc_eth.c: Call mdiobus_unregister before mdiobus_free

[ Upstream commit 57c10b61c84bfed68b1b317d6f507a392724b9c4 ]

Based on commit b27393aecf66199f5ddad37c302d3e0cfadbe6c0

Calling mdiobus_free without calling mdiobus_unregister causes
BUG_ON(). This patch fixes the issue.

The semantic patch that found this issue(http://coccinelle.lip6.fr/):
// <smpl>
@@
expression E;
@@
  ... when != mdiobus_unregister(E);

+ mdiobus_unregister(E);
  mdiobus_free(E);
// </smpl>

Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Tested-by: Roland Stigge <stigge@antcom.de>
Tested-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agonet: fix divide by zero in tcp algorithm illinois
Jesper Dangaard Brouer [Wed, 31 Oct 2012 02:45:32 +0000]
net: fix divide by zero in tcp algorithm illinois

[ Upstream commit 8f363b77ee4fbf7c3bbcf5ec2c5ca482d396d664 ]

Reading TCP stats when using TCP Illinois congestion control algorithm
can cause a divide by zero kernel oops.

The division by zero occur in tcp_illinois_info() at:
 do_div(t, ca->cnt_rtt);
where ca->cnt_rtt can become zero (when rtt_reset is called)

Steps to Reproduce:
 1. Register tcp_illinois:
     # sysctl -w net.ipv4.tcp_congestion_control=illinois
 2. Monitor internal TCP information via command "ss -i"
     # watch -d ss -i
 3. Establish new TCP conn to machine

Either it fails at the initial conn, or else it needs to wait
for a loss or a reset.

This is only related to reading stats.  The function avg_delay() also
performs the same divide, but is guarded with a (ca->cnt_rtt > 0) at its
calling point in update_params().  Thus, simply fix tcp_illinois_info().

Function tcp_illinois_info() / get_info() is called without
socket lock.  Thus, eliminate any race condition on ca->cnt_rtt
by using a local stack variable.  Simply reuse info.tcpv_rttcnt,
as its already set to ca->cnt_rtt.
Function avg_delay() is not affected by this race condition, as
its called with the socket lock.

Cc: Petr Matousek <pmatouse@redhat.com>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agonet: usb: Fix memory leak on Tx data path
Hemant Kumar [Thu, 25 Oct 2012 18:17:54 +0000]
net: usb: Fix memory leak on Tx data path

[ Upstream commit 39707c2a3ba5011038b363f84d37c8a98d2d9db1 ]

Driver anchors the tx urbs and defers the urb submission if
a transmit request comes when the interface is suspended.
Anchoring urb increments the urb reference count. These
deferred urbs are later accessed by calling usb_get_from_anchor()
for submission during interface resume. usb_get_from_anchor()
unanchors the urb but urb reference count remains same.
This causes the urb reference count to remain non-zero
after usb_free_urb() gets called and urb never gets freed.
Hence call usb_put_urb() after anchoring the urb to properly
balance the reference count for these deferred urbs. Also,
unanchor these deferred urbs during disconnect, to free them
up.

Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
Acked-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoipv6: Set default hoplimit as zero.
Li RongQing [Wed, 24 Oct 2012 06:01:18 +0000]
ipv6: Set default hoplimit as zero.

[ Upstream commit 14edd87dc67311556f1254a8f29cf4dd6cb5b7d1 ]

Commit a02e4b7dae4551(Demark default hoplimit as zero) only changes the
hoplimit checking condition and default value in ip6_dst_hoplimit, not
zeros all hoplimit default value.

Keep the zeroing ip6_template_metrics[RTAX_HOPLIMIT - 1] to force it as
const, cause as a37e6e344910(net: force dst_default_metrics to const
section)

Signed-off-by: Li RongQing <roy.qing.li@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agotcp: fix FIONREAD/SIOCINQ
Eric Dumazet [Thu, 18 Oct 2012 09:14:12 +0000]
tcp: fix FIONREAD/SIOCINQ

[ Upstream commit a3374c42aa5f7237e87ff3b0622018636b0c847e ]

tcp_ioctl() tries to take into account if tcp socket received a FIN
to report correct number bytes in receive queue.

But its flaky because if the application ate the last skb,
we return 1 instead of 0.

Correct way to detect that FIN was received is to test SOCK_DONE.

Reported-by: Elliot Hughes <enh@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agonetlink: use kfree_rcu() in netlink_release()
Eric Dumazet [Thu, 18 Oct 2012 03:21:55 +0000]
netlink: use kfree_rcu() in netlink_release()

[ Upstream commit 6d772ac5578f711d1ce7b03535d1c95bffb21dff ]

On some suspend/resume operations involving wimax device, we have
noticed some intermittent memory corruptions in netlink code.

Stéphane Marchesin tracked this corruption in netlink_update_listeners()
and suggested a patch.

It appears netlink_release() should use kfree_rcu() instead of kfree()
for the listeners structure as it may be used by other cpus using RCU
protection.

netlink_release() must set to NULL the listeners pointer when
it is about to be freed.

Also have to protect netlink_update_listeners() and
netlink_has_listeners() if listeners is NULL.

Add a nl_deref_protected() lockdep helper to properly document which
locks protects us.

Reported-by: Jonathan Kliegman <kliegs@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Stéphane Marchesin <marcheu@google.com>
Cc: Sam Leffler <sleffler@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agosctp: fix call to SCTP_CMD_PROCESS_SACK in sctp_cmd_interpreter()
Zijie Pan [Mon, 15 Oct 2012 03:56:39 +0000]
sctp: fix call to SCTP_CMD_PROCESS_SACK in sctp_cmd_interpreter()

[ Upstream commit f6e80abeab928b7c47cc1fbf53df13b4398a2bec ]

Bug introduced by commit edfee0339e681a784ebacec7e8c2dc97dc6d2839
(sctp: check src addr when processing SACK to update transport state)

Signed-off-by: Zijie Pan <zijie.pan@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoALSA: Avoid endless sleep after disconnect
Takashi Iwai [Wed, 7 Nov 2012 11:42:48 +0000]
ALSA: Avoid endless sleep after disconnect

commit 0914f7961babbf28aaa2f19b453951fb4841c03f upstream.

When disconnect callback is called, each component should wake up
sleepers and check card->shutdown flag for avoiding the endless sleep
blocking the proper resource release.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoALSA: Add a reference counter to card instance
Takashi Iwai [Wed, 7 Nov 2012 11:42:47 +0000]
ALSA: Add a reference counter to card instance

commit a0830dbd4e42b38aefdf3fb61ba5019a1a99ea85 upstream.

For more strict protection for wild disconnections, a refcount is
introduced to the card instance, and let it up/down when an object is
referred via snd_lookup_*() in the open ops.

The free-after-last-close check is also changed to check this refcount
instead of the empty list, too.

Reported-by: Matthieu CASTET <matthieu.castet@parrot.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoALSA: usb-audio: Fix races at disconnection in mixer_quirks.c
Takashi Iwai [Wed, 7 Nov 2012 11:42:46 +0000]
ALSA: usb-audio: Fix races at disconnection in mixer_quirks.c

commit 888ea7d5ac6815ba16b3b3a20f665a92c7af6724 upstream.

Similar like the previous commit, cover with chip->shutdown_rwsem
and chip->shutdown checks.

Reported-by: Matthieu CASTET <matthieu.castet@parrot.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoALSA: usb-audio: Use rwsem for disconnect protection
Takashi Iwai [Wed, 7 Nov 2012 11:42:45 +0000]
ALSA: usb-audio: Use rwsem for disconnect protection

commit 34f3c89fda4fba9fe689db22253ca8db2f5e6386 upstream.

Replace mutex with rwsem for codec->shutdown protection so that
concurrent accesses are allowed.

Also add the protection to snd_usb_autosuspend() and
snd_usb_autoresume(), too.

Reported-by: Matthieu CASTET <matthieu.castet@parrot.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoALSA: usb-audio: Fix races at disconnection
Takashi Iwai [Wed, 7 Nov 2012 11:42:44 +0000]
ALSA: usb-audio: Fix races at disconnection

commit 978520b75f0a1ce82b17e1e8186417250de6d545 upstream.

Close some races at disconnection of a USB audio device by adding the
chip->shutdown_mutex and chip->shutdown check at appropriate places.

The spots to put bandaids are:
- PCM prepare, hw_params and hw_free
- where the usb device is accessed for communication or get speed, in
 mixer.c and others; the device speed is now cached in subs->speed
 instead of accessing to chip->dev

The accesses in PCM open and close don't need the mutex protection
because these are already handled in the core PCM disconnection code.

The autosuspend/autoresume codes are still uncovered by this patch
because of possible mutex deadlocks.  They'll be covered by the
upcoming change to rwsem.

Also the mixer codes are untouched, too.  These will be fixed in
another patch, too.

Reported-by: Matthieu CASTET <matthieu.castet@parrot.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoALSA: PCM: Fix some races at disconnection
Takashi Iwai [Wed, 7 Nov 2012 11:39:51 +0000]
ALSA: PCM: Fix some races at disconnection

commit 9b0573c07f278e9888c352aa9724035c75784ea0 upstream.

Fix races at PCM disconnection:
- while a PCM device is being opened or closed
- while the PCM state is being changed without lock in prepare,
  hw_params, hw_free ops

Reported-by: Matthieu CASTET <matthieu.castet@parrot.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agohwmon: (w83627ehf) Force initial bank selection
Jean Delvare [Mon, 5 Nov 2012 20:54:39 +0000]
hwmon: (w83627ehf) Force initial bank selection

commit 3300fb4f88688029fff8dfb9ec0734f6e4cba3e7 upstream.

Don't assume bank 0 is selected at device probe time. This may not be
the case. Force bank selection at first register access to guarantee
that we read the right registers upon driver loading.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agodrm: restore open_count if drm_setup fails
Ilija Hadzic [Mon, 29 Oct 2012 17:35:00 +0000]
drm: restore open_count if drm_setup fails

commit 0f1cb1bd94a9c967cd4ad3de51cfdabe61eb5dcc upstream.

If drm_setup (called at first open) fails, the whole
open call has failed, so we should not keep the
open_count incremented.

Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoNFS: Fix Oopses in nfs_lookup_revalidate and nfs4_lookup_revalidate
Trond Myklebust [Wed, 22 Aug 2012 20:08:17 +0000]
NFS: Fix Oopses in nfs_lookup_revalidate and nfs4_lookup_revalidate

[Fixed upstream as part of 0b728e1911c, but that's a much larger patch,
this is only the nfs portion backported as needed.]

Fix the following Oops in 3.5.1:

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000038
 IP: [<ffffffffa03789cd>] nfs_lookup_revalidate+0x2d/0x480 [nfs]
 PGD 337c63067 PUD 0
 Oops: 0000 [#1] SMP
 CPU 5
 Modules linked in: nfs fscache nfsd lockd nfs_acl auth_rpcgss sunrpc af_packet binfmt_misc cpufreq_conservative cpufreq_userspace cpufreq_powersave dm_mod acpi_cpufreq mperf coretemp gpio_ich kvm_intel joydev kvm ioatdma hid_generic igb lpc_ich i7core_edac edac_core ptp serio_raw dca pcspkr i2c_i801 mfd_core sg pps_core usbhid crc32c_intel microcode button autofs4 uhci_hcd ttm drm_kms_helper drm i2c_algo_bit sysimgblt sysfillrect syscopyarea ehci_hcd usbcore usb_common scsi_dh_rdac scsi_dh_emc scsi_dh_hp_sw scsi_dh_alua scsi_dh edd fan ata_piix thermal processor thermal_sys

 Pid: 30431, comm: java Not tainted 3.5.1-2-default #1 Supermicro X8DTT/X8DTT
 RIP: 0010:[<ffffffffa03789cd>]  [<ffffffffa03789cd>] nfs_lookup_revalidate+0x2d/0x480 [nfs]
 RSP: 0018:ffff8801b418bd38  EFLAGS: 00010292
 RAX: 00000000fffffff6 RBX: ffff88032016d800 RCX: 0000000000000020
 RDX: ffffffff00000000 RSI: 0000000000000000 RDI: ffff8801824a7b00
 RBP: ffff8801b418bdf8 R08: 7fffff0034323030 R09: fffffffff04c03ed
 R10: ffff8801824a7b00 R11: 0000000000000002 R12: ffff8801824a7b00
 R13: ffff8801824a7b00 R14: 0000000000000000 R15: ffff8803201725d0
 FS:  00002b53a46cb700(0000) GS:ffff88033fc20000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000038 CR3: 000000020a426000 CR4: 00000000000007e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
 Process java (pid: 30431, threadinfo ffff8801b418a000, task ffff8801b5d20600)
 Stack:
  ffff8801b418be44 ffff88032016d800 ffff8801b418bdf8 0000000000000000
  ffff8801824a7b00 ffff8801b418bdd7 ffff8803201725d0 ffffffff8116a9c0
  ffff8801b5c38dc0 0000000000000007 ffff88032016d800 0000000000000000
 Call Trace:
  [<ffffffff8116a9c0>] lookup_dcache+0x80/0xe0
  [<ffffffff8116aa43>] __lookup_hash+0x23/0x90
  [<ffffffff8116b4a5>] lookup_one_len+0xc5/0x100
  [<ffffffffa03869a3>] nfs_sillyrename+0xe3/0x210 [nfs]
  [<ffffffff8116cadf>] vfs_unlink.part.25+0x7f/0xe0
  [<ffffffff8116f22c>] do_unlinkat+0x1ac/0x1d0
  [<ffffffff815717b9>] system_call_fastpath+0x16/0x1b
  [<00002b5348b5f527>] 0x2b5348b5f526
 Code: ec 38 b8 f6 ff ff ff 4c 89 64 24 18 4c 89 74 24 28 49 89 fc 48 89 5c 24 08 48 89 6c 24 10 49 89 f6 4c 89 6c 24 20 4c 89 7c 24 30 <f6> 46 38 40 0f 85 d1 00 00 00 e8 c4 c4 df e0 48 8b 58 30 49 89
 RIP  [<ffffffffa03789cd>] nfs_lookup_revalidate+0x2d/0x480 [nfs]
  RSP <ffff8801b418bd38>
 CR2: 0000000000000038
 ---[ end trace 845113ed191985dd ]---

This Oops affects 3.5 kernels and older, and is due to lookup_one_len()
calling down to the dentry revalidation code with a NULL pointer
to struct nameidata.

It is fixed upstream by commit 0b728e1911c (stop passing nameidata *
to ->d_revalidate())

Reported-by: Richard Ems <richard.ems@cape-horn-eng.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoNFS: fix bug in legacy DNS resolver.
NeilBrown [Wed, 31 Oct 2012 01:16:01 +0000]
NFS: fix bug in legacy DNS resolver.

commit 8d96b10639fb402357b75b055b1e82a65ff95050 upstream.

The DNS resolver's use of the sunrpc cache involves a 'ttl' number
(relative) rather that a timeout (absolute).  This confused me when
I wrote
  commit c5b29f885afe890f953f7f23424045cdad31d3e4
     "sunrpc: use seconds since boot in expiry cache"

and I managed to break it.  The effect is that any TTL is interpreted
as 0, and nothing useful gets into the cache.

This patch removes the use of get_expiry() - which really expects an
expiry time - and uses get_uint() instead, treating the int correctly
as a ttl.

This fixes a regression that has been present since 2.6.37, causing
certain NFS accesses in certain environments to incorrectly fail.

Reported-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agonfsd: add get_uint for u32's
J. Bruce Fields [Tue, 12 Jun 2012 20:54:16 +0000]
nfsd: add get_uint for u32's

commit a007c4c3e943ecc054a806c259d95420a188754b upstream.

I don't think there's a practical difference for the range of values
these interfaces should see, but it would be safer to be unambiguous.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoNFSv4.1: We must release the sequence id when we fail to get a session slot
Trond Myklebust [Mon, 29 Oct 2012 22:37:40 +0000]
NFSv4.1: We must release the sequence id when we fail to get a session slot

commit 2240a9e2d013d8269ea425b73e1d7a54c7bc141f upstream.

If we do not release the sequence id in cases where we fail to get a
session slot, then we can deadlock if we hit a recovery scenario.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoNFSv4: nfs4_locku_done must release the sequence id
Trond Myklebust [Mon, 29 Oct 2012 22:53:23 +0000]
NFSv4: nfs4_locku_done must release the sequence id

commit 2b1bc308f492589f7d49012ed24561534ea2be8c upstream.

If the state recovery machinery is triggered by the call to
nfs4_async_handle_error() then we can deadlock.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agonfs: Show original device name verbatim in /proc/*/mount{s,info}
Ben Hutchings [Sun, 21 Oct 2012 18:23:52 +0000]
nfs: Show original device name verbatim in /proc/*/mount{s,info}

commit 97a54868262da1629a3e65121e65b8e8c4419d9f upstream.

Since commit c7f404b ('vfs: new superblock methods to override
/proc/*/mount{s,info}'), nfs_path() is used to generate the mounted
device name reported back to userland.

nfs_path() always generates a trailing slash when the given dentry is
the root of an NFS mount, but userland may expect the original device
name to be returned verbatim (as it used to be).  Make this
canonicalisation optional and change the callers accordingly.

[jrnieder@gmail.com: use flag instead of bool argument]
Reported-and-tested-by: Chris Hiestand <chiestand@salk.edu>
Reference: http://bugs.debian.org/669314
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agonfsv3: Make v3 mounts fail with ETIMEDOUTs instead EIO on mountd timeouts
Scott Mayhew [Tue, 16 Oct 2012 17:22:19 +0000]
nfsv3: Make v3 mounts fail with ETIMEDOUTs instead EIO on mountd timeouts

commit acce94e68a0f346115fd41cdc298197d2d5a59ad upstream.

In very busy v3 environment, rpc.mountd can respond to the NULL
procedure but not the MNT procedure in a timely manner causing
the MNT procedure to time out. The problem is the mount system
call returns EIO which causes the mount to fail, instead of
ETIMEDOUT, which would cause the mount to be retried.

This patch sets the RPC_TASK_SOFT|RPC_TASK_TIMEOUT flags to
the rpc_call_sync() call in nfs_mount() which causes
ETIMEDOUT to be returned on timed out connections.

Signed-off-by: Steve Dickson <steved@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agomac80211: fix SSID copy on IBSS JOIN
Antonio Quartulli [Fri, 26 Oct 2012 16:54:25 +0000]
mac80211: fix SSID copy on IBSS JOIN

commit badecb001a310408d3473b1fc2ed5aefd0bc92a9 upstream.

The 'ssid' field of the cfg80211_ibss_params is a u8 pointer and
its length is likely to be less than IEEE80211_MAX_SSID_LEN most
of the time.

This patch fixes the ssid copy in ieee80211_ibss_join() by using
the SSID length to prevent it from reading beyond the string.

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
[rewrapped commit message, small rewording]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agomac80211: make sure data is accessible in EAPOL check
Johannes Berg [Thu, 25 Oct 2012 22:41:23 +0000]
mac80211: make sure data is accessible in EAPOL check

commit 6dbda2d00d466225f9db1dc695ff852443f28832 upstream.

The code to allow EAPOL frames even when the station
isn't yet marked associated needs to check that the
incoming frame is long enough and due to paged RX it
also can't assume skb->data contains the right data,
it must use skb_copy_bits(). Fix this to avoid using
data that doesn't really exist.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agomac80211: verify that skb data is present
Johannes Berg [Thu, 25 Oct 2012 22:36:40 +0000]
mac80211: verify that skb data is present

commit 9b395bc3be1cebf0144a127c7e67d56dbdac0930 upstream.

A number of places in the mesh code don't check that
the frame data is present and in the skb header when
trying to access. Add those checks and the necessary
pskb_may_pull() calls. This prevents accessing data
that doesn't actually exist.

To do this, export ieee80211_get_mesh_hdrlen() to be
able to use it in mac80211.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agomac80211: check management frame header length
Johannes Berg [Thu, 25 Oct 2012 22:33:36 +0000]
mac80211: check management frame header length

commit 4a4f1a5808c8bb0b72a4f6e5904c53fb8c9cd966 upstream.

Due to pskb_may_pull() checking the skb length, all
non-management frames are checked on input whether
their 802.11 header is fully present. Also add that
check for management frames and remove a check that
is now duplicate. This prevents accessing skb data
beyond the frame end.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agodrm/udl: fix stride issues scanning out stride != width*bpp
Dave Airlie [Thu, 1 Nov 2012 03:47:09 +0000]
drm/udl: fix stride issues scanning out stride != width*bpp

commit 3916e1d71b62b120888aa50bcc8d9a6200fc19a7 upstream.

When buffer sharing with the i915 and using a 1680x1050 monitor,
the i915 gives is a 6912 buffer for the 6720 width, the code doesn't
render this properly as it uses one value to set the base address for
reading from the vmap and for where to start on the device.

This fixes it by calculating the values correctly for the device and
for the pixmap. No idea how I haven't seen this before now.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoDRM/Radeon: Fix Load Detection on legacy primary DAC.
Egbert Eich [Wed, 24 Oct 2012 16:29:49 +0000]
DRM/Radeon: Fix Load Detection on legacy primary DAC.

commit 83325d072185899b706de2956170b246585aaec9 upstream.

An uninitialized variable led to broken load detection.

Signed-off-by: Egbert Eich <eich@suse.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agomac80211: don't inspect Sequence Control field on control frames
Javier Cardona [Thu, 25 Oct 2012 18:10:18 +0000]
mac80211: don't inspect Sequence Control field on control frames

commit f7fbf70ee9db6da6033ae50d100e017ac1f26555 upstream.

Per IEEE Std. 802.11-2012, Sec 8.2.4.4.1, the sequence Control field is
not present in control frames.  We noticed this problem when processing
Block Ack Requests.

Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: Javier Lopez <jlopex@cozybit.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agomac80211: Only process mesh config header on frames that RA_MATCH
Javier Cardona [Wed, 24 Oct 2012 19:43:30 +0000]
mac80211: Only process mesh config header on frames that RA_MATCH

commit 555cb715be8ef98b8ec362b23dfc254d432a35b1 upstream.

Doing otherwise is wrong, and may wreak havoc on the mpp tables,
specially if the frame is encrypted.

Reported-by: Chaoxing Lin <Chaoxing.Lin@ultra-3eti.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agomac80211: use blacklist for duplicate IE check
Johannes Berg [Wed, 24 Oct 2012 12:19:53 +0000]
mac80211: use blacklist for duplicate IE check

commit 9690fb169b433a66485c808e4fc352b8a0f8d866 upstream.

Instead of the current whitelist which accepts duplicates
only for the quiet and vendor IEs, use a blacklist of all
IEs (that we currently parse) that can't be duplicated.

This avoids detecting a beacon as corrupt in the future
when new IEs are added that can be duplicated.

Signed-off-by: Paul Stewart <pstew@chromium.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agowireless: drop invalid mesh address extension frames
Johannes Berg [Thu, 25 Oct 2012 19:51:59 +0000]
wireless: drop invalid mesh address extension frames

commit 7dd111e8ee10cc6816669eabcad3334447673236 upstream.

The mesh header can have address extension by a 4th
or a 5th and 6th address, but never both. Drop such
frames in 802.11 -> 802.3 conversion along with any
frames that have the wrong extension.

Reviewed-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agocfg80211: fix antenna gain handling
Felix Fietkau [Wed, 17 Oct 2012 11:56:19 +0000]
cfg80211: fix antenna gain handling

commit c4a9fafc77a5318f5ed26c509bbcddf03e18c201 upstream.

No driver initializes chan->max_antenna_gain to something sensible, and
the only place where it is being used right now is inside ath9k. This
leads to ath9k potentially using less tx power than it can use, which can
decrease performance/range in some rare cases.

Rather than going through every single driver, this patch initializes
chan->orig_mag in wiphy_register(), ignoring whatever value the driver
left in there. If a driver for some reason wishes to limit it independent
from regulatory rulesets, it can do so internally.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agotarget: Fix incorrect usage of nested IRQ spinlocks in ABORT_TASK path
Steve Hodgson [Wed, 31 Oct 2012 17:24:02 +0000]
target: Fix incorrect usage of nested IRQ spinlocks in ABORT_TASK path

commit ab74b3d62f05192bf8fb8f169e7999d1183b2e08 upstream.

This patch changes core_tmr_abort_task() to use spin_lock -> spin_unlock
around se_cmd->t_state_lock while spin_lock_irqsave is held via
se_sess->sess_cmd_lock.

Signed-off-by: Steve Hodgson <steve@purestorage.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>