11 years agoV4L/DVB (6837): Convert cx88_input.audioroute to a bitfield
Michael Krufky [Mon, 17 Dec 2007 13:54:06 +0000]
V4L/DVB (6837): Convert cx88_input.audioroute to a bitfield

Prevent us from wasting some extra bytes of memory

Thanks to Trent Piepho, for pointing this out.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6836): Fix CodingStyle troubles caused by the previous cx88 commits
Mauro Carvalho Chehab [Mon, 17 Dec 2007 13:35:59 +0000]
V4L/DVB (6836): Fix CodingStyle troubles caused by the previous cx88 commits

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6834): cx88-video: Enable selection of the WM8775 for cx88 cards
Frej Drejhammar [Mon, 5 Nov 2007 20:57:11 +0000]
V4L/DVB (6834): cx88-video: Enable selection of the WM8775 for cx88 cards

The auto selection of pertinent helper chips (VIDEO_HELPER_CHIPS_AUTO)
should select the wm8775 driver, which is used by at least one
Conexant 2388x based card (Hauppauge HVR-1300), if VIDEO_CX88 is
selected.

Signed-off-by: Frej Drejhammar <frej.drejhammar@gmail.com>
Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6833): Don't limit cx88 audio routing to blackbird boards
Ricardo Cerqueira [Tue, 16 Oct 2007 23:52:08 +0000]
V4L/DVB (6833): Don't limit cx88 audio routing to blackbird boards

All cx2388 boards need the line-in audio to be routed from an external ADC
(refered to as "ADC mode" in the spec sheet), since the chip is uncapable
of dealing with baseband audio directly.
So... this patch enables normal mode when using the tuner (TV or Radio), and
enables ADC mode with any other source. It'll probably only work with boards
that have supported ADCs (such as the Wolfson wm9775)

Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6832): cx88-blackbird: don't mute audio when stopping the codec
Michael Krufky [Sat, 13 Oct 2007 23:42:45 +0000]
V4L/DVB (6832): cx88-blackbird: don't mute audio when stopping the codec

We should not mute the audio input when we stop the codec,
because it will interfere with the live uncompressed stream.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Reviewed-by: Jelle Foks <jelle@foks.8m.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6831): Audio routes fix for blackbird boards with the wm8775 ADC
Ricardo Cerqueira [Sun, 30 Sep 2007 16:02:49 +0000]
V4L/DVB (6831): Audio routes fix for blackbird boards with the wm8775 ADC

Fix lack of audio on the MPEG-2 stream of wm8775 based blackbirds.

The wm8775 module initializes the audio input at "route 2", which doesn't
hold true for all boards. The HVR-1300, for example, uses route 1 for
tuner audio, and route 2 for baseband. So we must route the audio to the
proper input depending on what video input is being used.

Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6830): cx88-blackbird: remove unnecessary encoder unmute
Jelle Foks [Mon, 21 May 2007 17:48:58 +0000]
V4L/DVB (6830): cx88-blackbird: remove unnecessary encoder unmute

Remove the unnecessary BLACKBIRD_UNMUTE calls to the mpeg encoder in
cx88-blackbird.c

The encoder is never muted, hence unmuting should then only be necessary
once after hardware initialization.

I tested this from warm boots and cold boots (with long power down time
to ensure the sram in the chip is emptied), and found that after the
firmware upload the encoder is apparently not muted, making the unmutes
unnecessary.

Signed-off-by: Jelle Foks <jelle@foks.8m.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6829): cx88-blackbird: remove unnecessary msleep()'s
Jelle Foks [Mon, 21 May 2007 17:46:06 +0000]
V4L/DVB (6829): cx88-blackbird: remove unnecessary msleep()'s

Remove the unnecessary msleep()'s in cx88-blackbird.c

Signed-off-by: Jelle Foks <jelle@foks.8m.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6828): cx88-blackbird: audio improvements
Jelle Foks [Mon, 21 May 2007 17:36:01 +0000]
V4L/DVB (6828): cx88-blackbird: audio improvements

This patch should fix the 'muted audio' and 'raspy audio' problem for
mpeg2 streams out of cx88-blackbird devices.

Especially mythtv users would find that the audio would often sound bad
(aliased, or 'raspy'), mainly related to channel changes, many (all?)
other users would find that there was no audio at all in the mpeg data
from the encoder chip, unless the audio was manually unmuted.

The patch includes the following modifications:

Don't actually start the mpeg2 encoder until the device is read from
by the application.

Wait until the audio is stable for at least 400ms before starting the
mpeg encoder.

Mute/Unmute the audio when starting/stopping the mpeg encoder.

Stop the mpeg encoder when changing parameters and when changing tuner
frequency.

Add a variable 'mpeg_active' to struct cx8802_dev to allow tracking of
whether or not the mpeg2 encoder is active.

Load the firmware on cx88-blackbird driver load.

Signed-off-by: Jelle Foks <jelle@foks.8m.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6827): Auto-selects D2633 for ATSC
Mauro Carvalho Chehab [Sun, 16 Dec 2007 12:24:30 +0000]
V4L/DVB (6827): Auto-selects D2633 for ATSC

ATSC standard-specific firmware is D2633 on both v2.5 and v2.7. Better to
auto-select this firmware, overriding ctrl.d2633.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6822): s5h1409: use VSB IF frequency ( 44 / 5.38 MHz ) unless otherwise...
Michael Krufky [Thu, 13 Dec 2007 13:11:49 +0000]
V4L/DVB (6822): s5h1409: use VSB IF frequency ( 44 / 5.38 MHz ) unless otherwise specified

use VSB IF frequency ( 44 / 5.38 MHz ) if qam_if is invalid or unspecified

Acked-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6821): s5h1409: fix IF frequency configuration
Michael Krufky [Thu, 13 Dec 2007 13:04:10 +0000]
V4L/DVB (6821): s5h1409: fix IF frequency configuration

On the s5h1409 demod, the IF frequency for VSB is limited to 44 / 5.38 MHz.

Hardcode VSB IF frequency within the driver to 44 / 5.38 MHz.
QAM IF frequency remains configurable via attach-time configuration.

Acked-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6818): git-dvb: drivers/media/dvb/frontends/zl10353.c: avoid 64-bit divide
Andrew Morton [Thu, 13 Dec 2007 00:43:57 +0000]
V4L/DVB (6818): git-dvb: drivers/media/dvb/frontends/zl10353.c: avoid 64-bit divide

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6817): Cleanup kernel thread and provide overrun detection
Mauro Carvalho Chehab [Thu, 13 Dec 2007 19:15:41 +0000]
V4L/DVB (6817): Cleanup kernel thread and provide overrun detection

The previous code were a little bit messy. Cleans it up.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6816): Add proper locking for buffer filling
Mauro Carvalho Chehab [Thu, 13 Dec 2007 19:13:37 +0000]
V4L/DVB (6816): Add proper locking for buffer filling

Avoids de-alocating buffers before finishing to fill a buffer

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6815): Fix vivi internal debug messages
Mauro Carvalho Chehab [Thu, 13 Dec 2007 16:30:14 +0000]
V4L/DVB (6815): Fix vivi internal debug messages

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6812): media: video: usbvision: remove ctrlUrbLock
Daniel Walker [Wed, 12 Dec 2007 21:37:54 +0000]
V4L/DVB (6812): media: video: usbvision: remove ctrlUrbLock

The ctrlUrbLock has all it's users commented out, and so it's unused.  This
patch removes it.

Signed-off-by: Daniel Walker <dwalker@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thierry MERLE <thierry.merle@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6811): media-video-usbvision-add-mutex_unlock-to-error-paths-fix
Andrew Morton [Wed, 12 Dec 2007 21:25:23 +0000]
V4L/DVB (6811): media-video-usbvision-add-mutex_unlock-to-error-paths-fix

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thierry MERLE <thierry.merle@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6810): media: video: usbvision: add mutex_unlock() to error paths
Daniel Walker [Wed, 12 Dec 2007 21:22:48 +0000]
V4L/DVB (6810): media: video: usbvision: add mutex_unlock() to error paths

There are a few error paths which don't unlock the usbvision->lock.

So I've added mutex_unlock() calls to fix those paths.

Signed-off-by: Daniel Walker <dwalker@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thierry MERLE <thierry.merle@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6809): git-dvb: drivers/media/video/et61x251/et61x251_core.c: fix warnings
Andrew Morton [Wed, 12 Dec 2007 22:55:49 +0000]
V4L/DVB (6809): git-dvb: drivers/media/video/et61x251/et61x251_core.c: fix warnings

drivers/media/video/et61x251/et61x251_core.c:390: warning: 'et61x251_i2c_read' defined but not used
drivers/media/video/et61x251/et61x251_core.c:397: warning: 'et61x251_i2c_write' defined but not used

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6808): git-dvb: fix build in drivers/media/dvb/frontends/tda18271.h
Andrew Morton [Wed, 12 Dec 2007 22:27:57 +0000]
V4L/DVB (6808): git-dvb: fix build in drivers/media/dvb/frontends/tda18271.h

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6807): fix debug enable
Mauro Carvalho Chehab [Thu, 13 Dec 2007 09:36:22 +0000]
V4L/DVB (6807): fix debug enable

The changes at vivi_template make debug option to not work properly.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6806): Allow emulating changes of video std by vivi
Mauro Carvalho Chehab [Thu, 13 Dec 2007 09:35:26 +0000]
V4L/DVB (6806): Allow emulating changes of video std by vivi

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6805): video std is a bitmask. Better to print in hexa
Mauro Carvalho Chehab [Thu, 13 Dec 2007 09:34:12 +0000]
V4L/DVB (6805): video std is a bitmask. Better to print in hexa

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6804): __videobuf_read_start is static
Mauro Carvalho Chehab [Thu, 13 Dec 2007 00:46:26 +0000]
V4L/DVB (6804): __videobuf_read_start is static

Thanks to Jean Delvare <khali@linux-fr.org> for pointing this.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6801): tda18271: pass i2c gate configuration into tda18271_attach()
Michael Krufky [Mon, 10 Dec 2007 01:23:30 +0000]
V4L/DVB (6801): tda18271: pass i2c gate configuration into tda18271_attach()

If we pass TDA18271_GATE_DIGITAL into tda18271_attach(), it will always try to
use the digital demodulator's i2c gate.

If we pass TDA18271_GATE_ANALOG into tda18271_attach(), it will always try to
use the analog demodulator's i2c gate.

If we pass TDA18271_GATE_AUTO into tda18271_attach(), it will try to use the
analog demodulator's i2c gate when tuning in analog mode, and it will try to
use the digital demodulator's i2c gate when tuning in digital mode.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6800): tda18271: use an enum rather than an integer to store analog / digita...
Michael Krufky [Mon, 10 Dec 2007 01:13:01 +0000]
V4L/DVB (6800): tda18271: use an enum rather than an integer to store analog / digital state

Use an enum rather than an integer #define to store analog / digital state.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6795): Add EXPORT_SYMBOL_GPL to the saa7134 video control routines
Mauro Carvalho Chehab [Tue, 11 Dec 2007 18:01:57 +0000]
V4L/DVB (6795): Add EXPORT_SYMBOL_GPL to the saa7134 video control routines

Those newer functions are used by saa7134-empress. Adds export for them:
+EXPORT_SYMBOL_GPL(saa7134_g_ctrl);
+EXPORT_SYMBOL_GPL(saa7134_s_ctrl);
+EXPORT_SYMBOL_GPL(saa7134_queryctrl);

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6793): Convert saa7134-empress to video_ioctl2
Mauro Carvalho Chehab [Tue, 11 Dec 2007 15:56:23 +0000]
V4L/DVB (6793): Convert saa7134-empress to video_ioctl2

saa7134 were converted to video_ioctl2, but saa7134_empress weren't. This broke
saa7134-empress, since it were dependent of saa7134_common_ioctl.

With the conversion, the module had a size decrease of 436 bytes on x86_64:

   text    data     bss     dec     hex filename
   5196    4912       4   10112    2780 old/saa7134-empress.ko
   4760    4912       4    9676    25cc new/saa7134-empress.ko

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6792): Fix VBI support
Mauro Carvalho Chehab [Tue, 11 Dec 2007 15:05:06 +0000]
V4L/DVB (6792): Fix VBI support

VBI were broken, since there weren't any function handlers for it. This patch
fixes it, by removing the vbi_template, using, instead video_template.

This also saves some space at the data segment.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6791): Rename all vidioc_ to saa7134_
Mauro Carvalho Chehab [Tue, 11 Dec 2007 14:51:53 +0000]
V4L/DVB (6791): Rename all vidioc_ to saa7134_

Some functions are used also by saa7134-empress, and need to be exported. To
avoid namespace confusion, rename all of them to saa7134_

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6789): tuner: use char *name instead of 128 byte fixed array for demod info
Michael Krufky [Mon, 10 Dec 2007 19:08:25 +0000]
V4L/DVB (6789): tuner: use char *name instead of 128 byte fixed array for demod info

Don't waste 128 bytes of memory for a name that might not actually need it.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6788): tda8290: fix codingstyle, open brace following struct on the same...
Michael Krufky [Mon, 10 Dec 2007 14:12:59 +0000]
V4L/DVB (6788): tda8290: fix codingstyle, open brace following struct on the same line

Fix codingstyle issue discovered after using new checkpatch.pl

 ERROR: open brace '{' following struct go on the same line
 396: FILE: linux/drivers/media/video/tda8290.h:24:
+struct tda829x_config
+{

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6787): tuner: bug-fix: default mode was set to bogus value
Michael Krufky [Sun, 9 Dec 2007 20:21:54 +0000]
V4L/DVB (6787): tuner: bug-fix: default mode was set to bogus value

Fix type inconsistency in t->mode value, causing the following:

tuner' 1-0043: freq set: unknown mode: 0x0004!

(only visible with tuner debug enabled)

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6786): tuner: add struct analog_demod_info to struct analog_tuner_ops
Michael Krufky [Sun, 9 Dec 2007 16:52:51 +0000]
V4L/DVB (6786): tuner: add struct analog_demod_info to struct analog_tuner_ops

Store the analog demodulator name in fe.ops.analog_demod_ops.info.name

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6785): tda8290: remove dependency on struct tuner
Michael Krufky [Sun, 9 Dec 2007 05:26:48 +0000]
V4L/DVB (6785): tda8290: remove dependency on struct tuner

- remove dependency of tda8290 module on struct tuner
- move tuner_foo printk macros from tuner-driver.h into tuner-core.c
- clean up #includes of tuner-i2c.h / tuner-driver.h

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6784): tda8290: prevent possible memory leak
Michael Krufky [Sun, 9 Dec 2007 08:16:10 +0000]
V4L/DVB (6784): tda8290: prevent possible memory leak

Always call tda829x_release if tda829x_attach fails for a reason
other than failure to allocate memory for private structure.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6783): tuner: combine set_tv_freq and set_radio_freq into a single set_param...
Michael Krufky [Sat, 8 Dec 2007 20:06:30 +0000]
V4L/DVB (6783): tuner: combine set_tv_freq and set_radio_freq into a single set_params method

We can tell whether we are tuning television or radio by testing for
struct analog_parameters *params->mode == V4L2_TUNER_RADIO

There is no longer any need for separate set_tv_freq and
set_radio_freq functions in the analog tuner demodulator modules.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6782): tda8290: access frontend structure directly, where possible
Michael Krufky [Sat, 8 Dec 2007 19:25:41 +0000]
V4L/DVB (6782): tda8290: access frontend structure directly, where possible

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6776): ivtv: Some general fixes
Richard Knutsson [Sat, 8 Dec 2007 13:35:06 +0000]
V4L/DVB (6776): ivtv: Some general fixes

Fix "warning: Using plain integer as NULL pointer".
Convert 'x < y ? x : y' to use min() instead.

Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6773): pvrusb2: rework device descriptor layout
Mike Isely [Sat, 8 Dec 2007 20:20:06 +0000]
V4L/DVB (6773): pvrusb2: rework device descriptor layout

The pvrusb2 driver tries to keep all device specific attributes in a
single data structure in one source file.  This change further cleans
up how that table is set up.  We now try to group everything together
for each specific device, and the number of symbols exported from this
module has now been reduced to a single global.

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6772): pvrusb2: Remove obsolete (and misleading) comment
Mike Isely [Sat, 8 Dec 2007 20:17:44 +0000]
V4L/DVB (6772): pvrusb2: Remove obsolete (and misleading) comment

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6771): pvrusb2: Remove old obsolete CONFIG flags for pvrusb2 driver
Mike Isely [Sat, 8 Dec 2007 20:17:09 +0000]
V4L/DVB (6771): pvrusb2: Remove old obsolete CONFIG flags for pvrusb2 driver

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6770): pvrusb2: Device CONFIG flags for OnAir device support
Mike Isely [Sat, 8 Dec 2007 20:15:55 +0000]
V4L/DVB (6770): pvrusb2: Device CONFIG flags for OnAir device support

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6769): pvrusb2: Implement experimental support for OnAir Creator and USB2...
Mike Isely [Sat, 8 Dec 2007 20:11:13 +0000]
V4L/DVB (6769): pvrusb2: Implement experimental support for OnAir Creator and USB2 devices

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6768): pvrusb2: Mark Gotview hardware as having a cx2584x part
Mike Isely [Sat, 8 Dec 2007 20:08:32 +0000]
V4L/DVB (6768): pvrusb2: Mark Gotview hardware as having a cx2584x part

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6766): ivtv: remove i2c legacy support from drivers that no longer need it
Hans Verkuil [Sat, 8 Dec 2007 10:43:14 +0000]
V4L/DVB (6766): ivtv: remove i2c legacy support from drivers that no longer need it

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6765): ivtv: convert to bus-based i2c API
Hans Verkuil [Sat, 8 Dec 2007 00:01:15 +0000]
V4L/DVB (6765): ivtv: convert to bus-based i2c API

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6764): ivtv: select VIDEO_IR in Kconfig
Hans Verkuil [Fri, 7 Dec 2007 23:48:29 +0000]
V4L/DVB (6764): ivtv: select VIDEO_IR in Kconfig

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6763): ivtv: add AVerMedia EZMaker PCI Deluxe support
Hans Verkuil [Fri, 7 Dec 2007 23:40:16 +0000]
V4L/DVB (6763): ivtv: add AVerMedia EZMaker PCI Deluxe support

Add support for the AVerMedia EZMaker PCI Deluxe and update the ivtv cardlist.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6762): ivtv: update version number to 1.2
Hans Verkuil [Fri, 7 Dec 2007 23:31:17 +0000]
V4L/DVB (6762): ivtv: update version number to 1.2

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6759): CodingStyle fixes
Mauro Carvalho Chehab [Mon, 10 Dec 2007 13:53:20 +0000]
V4L/DVB (6759): CodingStyle fixes

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6758): Miscelaneous cleanups
Mauro Carvalho Chehab [Mon, 10 Dec 2007 12:33:52 +0000]
V4L/DVB (6758): Miscelaneous cleanups

Manually fixed all pertinent checkpatch.pl errors inside the source code.

Also removed some unused code at the driver and a few minor cleanups.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6755): Avoid troubles when using multiple devices
Mauro Carvalho Chehab [Mon, 10 Dec 2007 07:43:38 +0000]
V4L/DVB (6755): Avoid troubles when using multiple devices

mv_count is a counter used to move the vertical bars. Before this patch, it
where a static var. This works fine for just one device. However, when using
multiple devices, every device would increment it.

This patch moves it to its correct place: struct vivi_dev. So, now, each device
has its own data.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6754): Allow vivi to open multiple video devices
Mauro Carvalho Chehab [Mon, 10 Dec 2007 07:38:11 +0000]
V4L/DVB (6754): Allow vivi to open multiple video devices

Now, it is possible to open multiple vivi devices, by using n_devs parameter.
This makes vivi driver closer to a real one.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6753): Fix vivi to support non-zero minor node
Mauro Carvalho Chehab [Mon, 10 Dec 2007 07:07:03 +0000]
V4L/DVB (6753): Fix vivi to support non-zero minor node

There were a trouble at vivi driver when using non-zero inodes. This where due
to not properly preserving the minor inode after calling video_register. Since
this driver is a reference for newer drivers, and it is possible to have more
than one video device inside the machine, this patch makes vivi to dynamically
allocate video_device struct.

Thanks to Gregor Jasny <jasny@vidsoft.de> for pointing the issue.

Also, this patch removes a very anoying (but useless) message of not having a
proper release call.

CC: Gregor Jasny <jasny@vidsoft.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6752): saa7134: Enable remote control support for Avermedia M102
Albert Graham [Sun, 9 Dec 2007 12:44:38 +0000]
V4L/DVB (6752): saa7134: Enable remote control support for Avermedia M102

This patch enabled the IR remote control for the Avermedia M102 (card=110),
which appears to be the same IR as the already supported device on the
Avermedia AVerTV GO 007 FM (card=57) model, the code is two one liners which
enable the IR for this device (subsystem: 1461:f31e)

Signed-off-by: Albert Graham <agraham@g-b.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6749): v4l-nopage-fix
Andrew Morton [Sat, 8 Dec 2007 00:14:43 +0000]
V4L/DVB (6749): v4l-nopage-fix

dont just copy-and-paste stuff.
(compile-tested this time)

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6748): Subject: v4l: nopage
Nick Piggin [Fri, 7 Dec 2007 20:57:38 +0000]
V4L/DVB (6748): Subject: v4l: nopage

Convert v4l from nopage to fault.
Remove redundant vma range checks.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6745): tda18271: remove tuning offset for atsc/qam
Michael Krufky [Fri, 7 Dec 2007 03:33:08 +0000]
V4L/DVB (6745): tda18271: remove tuning offset for atsc/qam

The tuning request coming in from userspace is already center adjusted,
so we should not adjust to center (+1.75mhz) within the driver.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6743): cx25840: fix endianness inconsistency
Hans Verkuil [Sun, 2 Dec 2007 10:03:45 +0000]
V4L/DVB (6743): cx25840: fix endianness inconsistency

cx25840_read4 reads a little-endian 32-bit value whereas cx25840_write4 writes
the 32-bit value as big-endian. Convert write4 to use little-endian as well
(that's the correct endianness).

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6742): ivtv: fix incorrect debug message
Hans Verkuil [Sun, 2 Dec 2007 09:56:00 +0000]
V4L/DVB (6742): ivtv: fix incorrect debug message

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6741): cx2341x: codingstyle cleanups
Hans Verkuil [Thu, 1 Nov 2007 16:38:12 +0000]
V4L/DVB (6741): cx2341x: codingstyle cleanups

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6740): tlv320aic23b: codingstyle cleanups
Hans Verkuil [Thu, 1 Nov 2007 10:58:17 +0000]
V4L/DVB (6740): tlv320aic23b: codingstyle cleanups

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6739): cs53l32a: codingstyle cleanups
Hans Verkuil [Thu, 1 Nov 2007 10:54:57 +0000]
V4L/DVB (6739): cs53l32a: codingstyle cleanups

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6738): wm8739: codingstyle cleanups
Hans Verkuil [Thu, 1 Nov 2007 10:45:54 +0000]
V4L/DVB (6738): wm8739: codingstyle cleanups

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6737): wm8775: codingstyle cleanup
Hans Verkuil [Thu, 1 Nov 2007 10:35:41 +0000]
V4L/DVB (6737): wm8775: codingstyle cleanup

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6736): Fix some errors at the video_ioctl2 conversion
Mauro Carvalho Chehab [Fri, 7 Dec 2007 20:34:48 +0000]
V4L/DVB (6736): Fix some errors at the video_ioctl2 conversion

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6735): Reorder functions to make easier to compare with the previous code
Mauro Carvalho Chehab [Fri, 7 Dec 2007 20:23:38 +0000]
V4L/DVB (6735): Reorder functions to make easier to compare with the previous code

After this patch, the order of the functions will be the same as before the
patch converting the driver to user video_ioctl2. This makes easier to diff
between the previous version and the newer one.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6734): Converted saa7134-video to use video_ioctl2
Douglas Schilling Landgraf [Fri, 7 Dec 2007 20:09:53 +0000]
V4L/DVB (6734): Converted saa7134-video to use video_ioctl2

Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6732): dsbr100 violates DMA coherency rules
Oliver Neukum [Mon, 3 Dec 2007 09:48:43 +0000]
V4L/DVB (6732): dsbr100 violates DMA coherency rules

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6731): ivtv: Remove a invalid shadow-variable
Richard Knutsson [Sun, 2 Dec 2007 17:47:01 +0000]
V4L/DVB (6731): ivtv: Remove a invalid shadow-variable

Remove the shadowing 'struct v4l2_chip_ident *chip', since it already exists
and makes the if-statement useless.

Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6728): tda18271: fix register dump format
Michael Krufky [Sun, 2 Dec 2007 20:37:38 +0000]
V4L/DVB (6728): tda18271: fix register dump format

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6727): tda18271: convert table lookup loops to functions
Michael Krufky [Sun, 2 Dec 2007 19:36:05 +0000]
V4L/DVB (6727): tda18271: convert table lookup loops to functions

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6726): tda18271: set image rejection validity
Michael Krufky [Sun, 2 Dec 2007 14:03:57 +0000]
V4L/DVB (6726): tda18271: set image rejection validity

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6725): tda18271: improve debug flexibility
Michael Krufky [Sun, 2 Dec 2007 05:45:04 +0000]
V4L/DVB (6725): tda18271: improve debug flexibility

converted debug module option to an or-able setting.

1 = info
2 = table map values
4 = register dumps

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6724): tda18271: remove duplicated code
Michael Krufky [Sun, 2 Dec 2007 05:32:49 +0000]
V4L/DVB (6724): tda18271: remove duplicated code

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6723): tda18271: only force init once during attach
Michael Krufky [Sat, 1 Dec 2007 20:40:16 +0000]
V4L/DVB (6723): tda18271: only force init once during attach

Once the image rejection calibration procedure has been successful,
we should not initialize the tuner registers again.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6719): ivtv: ivtv-yuv clean-up + source cropping bug-fix
Ian Armstrong [Tue, 13 Nov 2007 22:15:25 +0000]
V4L/DVB (6719): ivtv: ivtv-yuv clean-up + source cropping bug-fix

ivtv-yuv code clean up & reformat. Includes minor changes to some debug lines.

Also fixes a bug found during the reformatting, which would cause the
incorrect amount of yuv data to be sent to the card if source cropping
coordinates were used.

Apart from the bug-fix, there should be no functional difference to the
previous version.

Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6718): ivtv: ivtv yuv format description correction
Ian Armstrong [Mon, 5 Nov 2007 17:30:03 +0000]
V4L/DVB (6718): ivtv: ivtv yuv format description correction

The driver was incorrectly reporting that it supported YUV 4:2:2 output, when
it is actually YUV 4:2:0. Though I believe the hardware can be pushed to
4:2:2, we don't currently support that.

Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6717): ivtv: Initial merge of video48 yuv handling into the IVTV_IOC_DMA_FRA...
Ian Armstrong [Mon, 5 Nov 2007 17:27:09 +0000]
V4L/DVB (6717): ivtv: Initial merge of video48 yuv handling into the IVTV_IOC_DMA_FRAME framework

Previously, all yuv data written to /dev/video48 had only basic support with
no double buffering to avoid display tearing.

With this patch, yuv frames written to video48 are now handled by the existing
IVTV_IOC_DMA_FRAME framework. As such, the frames are hardware buffered to
avoid tearing, and honour scaling mode & field order options. Unlike the
proprietary IVTV_IOC_DMA_FRAME ioctl, all parameters are controlled by the
V4L2 API.

Due to mpeg & yuv output restrictions being different, their V4L2 output
controls have been separated. To control the yuv output, the V4L2 calls must
be done via video48.

If the ivtvfb module is loaded, there will be one side effect to this merge.
The yuv output window will be constrained to the visible framebuffer area. In
the event that a virtual framebuffer size is being used, the limit to the
output size will be the virtual dimensions, but only the portion that falls
within the currently visible area of the framebuffer will be shown.

Like the IVTV_IOC_DMA_FRAME ioctl, the supplied frames must be padded to 720
pixels wide. However the height must only be padded up the nearest multiple
of 32. This would mean an image of 102 lines must be padded to 128. As long
as the true source image size is given, the padding will not be visible in
the final output.

Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6716): ivtv: yuv interlace mode change
Ian Armstrong [Mon, 22 Oct 2007 17:24:26 +0000]
V4L/DVB (6716): ivtv: yuv interlace mode change

Interlace mode selection code moved into the frame setup phase, so it's now
run before the frame is loaded into a hardware buffer. Given that it can
affect how a new frame is displayed, it was a bit stupid running it after the
frame was already visible.

A few stray interlace related variables which were linked to individual frames
have now been moved into the yuv_frame_info struct. This means that all
variables linked to a specific frame are in the same place & not scattered.

Minor code reformatting in areas touched by the above changes.

Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6715): ivtv: Remove unnecessary register update
Ian Armstrong [Sun, 21 Oct 2007 11:33:59 +0000]
V4L/DVB (6715): ivtv: Remove unnecessary register update

To reduce the number of display register accesses, the yuv code keeps track of
the current video settings. Should there be a change in any single parameter,
it will update the associated display registers to ensure everything is
displayed correctly.

The existing check also looks at the field order for the video. This is not
required, since field reversal does not require any display register changes.

This patch removes the field order from the check.

Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6714): ivtv: yuv frame parameter fix
Ian Armstrong [Sun, 21 Oct 2007 11:09:10 +0000]
V4L/DVB (6714): ivtv: yuv frame parameter fix

Inadvertently missed a line when converting code to new hardware buffering
method. In some circumstances, this would lead to a frame being displayed
using parameters belonging to another frame.

Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6713): ivtv: ivtv_yuv_prep_frame breakup and yuv hardware buffer changes
Ian Armstrong [Sat, 20 Oct 2007 17:52:55 +0000]
V4L/DVB (6713): ivtv: ivtv_yuv_prep_frame breakup and yuv hardware buffer changes

ivtv_yuv_prep_frame is split in smaller code blocks.

Modified yuv buffer handling on the PVR350 itself. We now cycle through all 8
hardware buffers.

With this patch in place, driver behaviour should remain unchanged from the
existing release.

Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6712): ivtv: ivtv yuv stream handling change
Ian Armstrong [Tue, 16 Oct 2007 06:21:46 +0000]
V4L/DVB (6712): ivtv: ivtv yuv stream handling change

Currently the yuv output stream buffer is divided into blocks whose size
depend on the broadcast standard selected during the driver init phase.
However, the standard can be changed after the init phase. This effectively
breaks the yuv output stream handler, since it relies on the different yuv
planes being block aligned.

This patch changes the setup, so that the block size is always the same. The
decoder dma function has been modified to cope with the fact that the second
yuv plane may no longer be block aligned. The start of the yuv frame must
still be at the beginning of a block, so the stream write function has also
been modified to ensure this is always true.

Also, the stream write function will now initiate a yuv dma transfer as soon
as a full frame is ready. It will not wait until the current write request
has completed, or the stream buffer becomes full.

Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6710): pvrusb2: Recognize ATSC video standard bit values
Mike Isely [Mon, 3 Dec 2007 05:10:04 +0000]
V4L/DVB (6710): pvrusb2: Recognize ATSC video standard bit values

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6709): pvrusb2: minor rework for default video standard handling
Mike Isely [Mon, 3 Dec 2007 04:47:12 +0000]
V4L/DVB (6709): pvrusb2: minor rework for default video standard handling

pvrusb2: When a per-device-type default video standard is declared,
handle it in such a way that it can be correctly and unambiguously
reported in the system log.

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6708): pvrusb2: Expand comment in device attributes description
Mike Isely [Mon, 3 Dec 2007 04:45:26 +0000]
V4L/DVB (6708): pvrusb2: Expand comment in device attributes description

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6707): pvrusb2: Remove use of volatile in pipeline control state machine
Mike Isely [Mon, 3 Dec 2007 04:44:43 +0000]
V4L/DVB (6707): pvrusb2: Remove use of volatile in pipeline control state machine

pvrusb2: Eliminate use of volatile in pipeline control state
variables.  These were all cases of paranoia; upon further review the
overall mechanism employed here should not require use of volatile.
This had originally been done out of paranoia, and I have since been
convinced that the paranoia is not required.

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6706): pvrusb2: Remove use of volatile in command sequencer
Mike Isely [Mon, 3 Dec 2007 04:43:23 +0000]
V4L/DVB (6706): pvrusb2: Remove use of volatile in command sequencer

pvrusb2: Remove use of volatile for command sequencer; these variables
are set by interrupt-context code and we check their state in such a
manner that there should be no race conditions.  This had originally
been done out of paranoia, and I have since been convinced that the
paranoia is not required.

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6705): pvrusb2: Implement default standard selection based on device type
Mike Isely [Mon, 3 Dec 2007 02:51:34 +0000]
V4L/DVB (6705): pvrusb2: Implement default standard selection based on device type

This adds a default video standard setting to the pvr2_device_desc
structure for describing device types.  With this change it is
possible to set a reasonable default standard based on device type.

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6703): pvrusb2: Change division to bit-or for tveeprom standards
Roel Kluin [Mon, 3 Dec 2007 02:04:57 +0000]
V4L/DVB (6703): pvrusb2: Change division to bit-or for tveeprom standards

Signed-off-by: Roel Kluin <12o3l@tiscali.nl>
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6702): pvrusb2: fix typo in comments
Michael Krufky [Tue, 27 Nov 2007 19:58:33 +0000]
V4L/DVB (6702): pvrusb2: fix typo in comments

Firmware file name(s) for 24xxx devices

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6701): pvrusb2: Enable support for "GOTVIEW USB2.0 DVD2" hardware
Mike Isely [Mon, 26 Nov 2007 05:14:23 +0000]
V4L/DVB (6701): pvrusb2: Enable support for "GOTVIEW USB2.0 DVD2" hardware

This changeset allows the pvrusb2 driver to operate a new device type
("GOTVIEW USB2.0 DVD2").  Changes amount to defining a new routing
scheme for the device and adding appropriate table entries into
pvrusb2-devattr.c.

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6700): pvrusb2: Soften the crashed encoder warning message
Mike Isely [Mon, 26 Nov 2007 05:11:38 +0000]
V4L/DVB (6700): pvrusb2: Soften the crashed encoder warning message

The pvrusb2 driver has been successfully recovering from a crashed
encoder now for over 2 years.  I think it's time to reduce the
perceived severity of the warning message.  While I'd still very much
like to stop these crashes, the recovery logic is solid enough that
the problem is effectively benign.  No point in panicing the users
over it.

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6699): pvrusb2: Use of virtual IR chip is a device-specific attribute
Mike Isely [Mon, 26 Nov 2007 05:09:42 +0000]
V4L/DVB (6699): pvrusb2: Use of virtual IR chip is a device-specific attribute

For Hauppauge 24xxx devices, the IR receiver is a custom piece of
logic that is very specific to the device.  The pvrusb2 driver can
virtualize this to make it look like a more normal IR receiver found
in other Hauppauge devices.  The decision of whether or not to enable
this virtualization however is a device-specific attribute, thus this
changeset.

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6698): pvrusb2: Implement signal routing schemes
Mike Isely [Mon, 26 Nov 2007 05:07:26 +0000]
V4L/DVB (6698): pvrusb2: Implement signal routing schemes

The exact routing of video and audio signals within a device is a
device-specific attribute.  Hauppauge devices do it one way; other
types of device may route things differently.  Unfortunately it is
rather impractical to define chip-specific routing at the device
attribute level, so instead what happens here is that "schemes" are
defined.  Each chip level interface implements its part of a given
scheme and the scheme as a whole is made into a device specific
attribute controlled via a table entry in pvrusb2-devattr.c.  The only
scheme defined here is for Hauppauge devices, but clearly this opens
the door for other possibilities to follow.

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6697): pvrusb2: Existence of Hauppauge ROM is a device-specific attribute
Mike Isely [Mon, 26 Nov 2007 05:04:11 +0000]
V4L/DVB (6697): pvrusb2: Existence of Hauppauge ROM is a device-specific attribute

Arrange so that the pvrusb2 driver can optionally work without a
Hauppauge ROM being present - which is fairly important for devices
that happen to not come from Hauppauge.  The expected existence of a
Hauppauge ROM is now a device attribute.  The tuner type is now also a
device attribute, which is consulted if there is no ROM.

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

11 years agoV4L/DVB (6696): pvrusb2: Miscellaneous tweaks for controlling tuner type and video...
Mike Isely [Mon, 26 Nov 2007 05:00:51 +0000]
V4L/DVB (6696): pvrusb2: Miscellaneous tweaks for controlling tuner type and video standard

Correctly mark when a tuner type is set.  Report more faithfully
information about known supported device video standards.

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>