12 years agothermal: fix generic thermal I/F for hwmon
Zhang, Rui [Wed, 27 Feb 2008 00:37:50 +0000]
thermal: fix generic thermal I/F for hwmon

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

12 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux...
Linus Torvalds [Tue, 11 Mar 2008 16:47:28 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/x86/linux-2.6-x86

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86:
  x86: remove quicklists
  x86: ia32 syscall restart fix
  x86: ioremap, remove WARN_ON()

12 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux...
Linus Torvalds [Tue, 11 Mar 2008 16:18:56 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/mingo/linux-2.6-sched-devel

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched-devel:
  keep rd->online and cpu_online_map in sync
  Revert "cpu hotplug: adjust root-domain->online span in response to hotplug event"

12 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland...
Linus Torvalds [Tue, 11 Mar 2008 16:14:34 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/roland/infiniband

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  RDMA/iwcm: Don't access a cm_id after dropping reference
  IB/iser: Handle iser_device allocation error gracefully
  IB/iser: Fix list iteration bug
  RDMA/cxgb3: Fix iwch_create_cq() off-by-one error
  RDMA/cxgb3: Return correct max_inline_data when creating a QP
  IB/fmr_pool: Flush all dirty FMRs from ib_fmr_pool_flush()
  Revert "IB/fmr_pool: ib_fmr_pool_flush() should flush all dirty FMRs"
  IB/cm: Flush workqueue when removing device
  MAINTAINERS: update ipath owner

12 years agox86: remove quicklists
Thomas Gleixner [Sun, 9 Mar 2008 12:14:37 +0000]
x86: remove quicklists

quicklists cause a serious memory leak on 32-bit x86,
as documented at:

  http://bugzilla.kernel.org/show_bug.cgi?id=9991

the reason is that the quicklist pool is a special-purpose
cache that grows out of proportion. It is not accounted for
anywhere and users have no way to even realize that it's
the quicklists that are causing RAM usage spikes. It was
supposed to be a relatively small pool, but as demonstrated
by KOSAKI Motohiro, they can grow as large as:

  Quicklists:    1194304 kB

given how much trouble this code has caused historically,
and given that Andrew objected to its introduction on x86
(years ago), the best option at this point is to remove them.

[ any performance benefits of caching constructed pgds should
  be implemented in a more generic way (possibly within the page
  allocator), while still allowing constructed pages to be
  allocated by other workloads. ]

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agox86: ia32 syscall restart fix
Roland McGrath [Fri, 29 Feb 2008 03:57:07 +0000]
x86: ia32 syscall restart fix

The code to restart syscalls after signals depends on checking for a
negative orig_ax, and for particular negative -ERESTART* values in ax.
These fields are 64 bits and for a 32-bit task they get zero-extended.
The syscall restart behavior is lost, a regression from a native 32-bit
kernel and from 64-bit tasks' behavior.

This patch fixes the problem by doing sign-extension where it matters.

For orig_ax, the only time the value should be -1 but winds up as
0x0ffffffff is via a 32-bit ptrace call. So the patch changes ptrace to
sign-extend the 32-bit orig_eax value when it's stored; it doesn't
change the checks on orig_ax, though it uses the new current_syscall()
inline to better document the subtle importance of the used of
signedness there.

The ax value is stored a lot of ways and it seems hard to get them all
sign-extended at their origins. So for that, we use the
current_syscall_ret() to sign-extend it only for 32-bit tasks at the
time of the -ERESTART* comparisons.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agox86: ioremap, remove WARN_ON()
Ingo Molnar [Tue, 26 Feb 2008 08:30:32 +0000]
x86: ioremap, remove WARN_ON()

Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agokeep rd->online and cpu_online_map in sync
Gregory Haskins [Mon, 10 Mar 2008 21:59:11 +0000]
keep rd->online and cpu_online_map in sync

It is possible to allow the root-domain cache of online cpus to
become out of sync with the global cpu_online_map.  This is because we
currently trigger removal of cpus too early in the notifier chain.
Other DOWN_PREPARE handlers may in fact run and reconfigure the
root-domain topology, thereby stomping on our own offline handling.

The end result is that rd->online may become out of sync with
cpu_online_map, which results in potential task misrouting.

So change the offline handling to be more tightly coupled with the
global offline process by triggering on CPU_DYING intead of
CPU_DOWN_PREPARE.

Signed-off-by: Gregory Haskins <ghaskins@novell.com>
Cc: Gautham R Shenoy <ego@in.ibm.com>
Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agoRevert "cpu hotplug: adjust root-domain->online span in response to hotplug event"
Gregory Haskins [Mon, 10 Mar 2008 20:52:41 +0000]
Revert "cpu hotplug: adjust root-domain->online span in response to hotplug event"

This reverts commit 393d94d98b19089ec172566e23557997931b137e.

Lets fix this right.

Signed-off-by: Gregory Haskins <ghaskins@novell.com>
Cc: Gautham R Shenoy <ego@in.ibm.com>
Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agoRDMA/iwcm: Don't access a cm_id after dropping reference
Steve Wise [Tue, 4 Mar 2008 22:44:52 +0000]
RDMA/iwcm: Don't access a cm_id after dropping reference

cm_work_handler() can access cm_id_priv after it drops its reference
by calling iwch_deref_id(), which might cause it to be freed.  The fix
is to look at whether IWCM_F_CALLBACK_DESTROY is set _before_ dropping
the reference.  Then if it was set, free the cm_id on this thread.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

12 years agoIB/iser: Handle iser_device allocation error gracefully
Arne Redlich [Tue, 4 Mar 2008 12:11:54 +0000]
IB/iser: Handle iser_device allocation error gracefully

"iser_device" allocation failure is "handled" with a BUG_ON() right
before dereferencing the NULL-pointer - fix this!

Signed-off-by: Arne Redlich <arne.redlich@xiranet.com>
Signed-off-by: Erez Zilber <erezz@voltaire.com>

12 years agoIB/iser: Fix list iteration bug
Arne Redlich [Tue, 4 Mar 2008 12:07:22 +0000]
IB/iser: Fix list iteration bug

The iteration through the list of "iser_device"s during device
lookup/creation is broken -- it might result in an infinite loop if
more than one HCA is used with iSER.  Fix this by using
list_for_each_entry() instead of the open-coded flawed list iteration
code.

Signed-off-by: Arne Redlich <arne.redlich@xiranet.com>
Signed-off-by: Erez Zilber <erezz@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

12 years agoMerge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzi...
Linus Torvalds [Tue, 11 Mar 2008 01:45:51 +0000]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/jgarzik/libata-dev

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  [libata] Add support for the RB500 PATA CompactFlash
  ahci: logical-bitwise and confusion in ahci_save_initial_config()
  libata: don't allow sysfs read access to force param
  ahci: add the Device IDs for nvidia MCP7B AHCI
  libata-sff: handle controllers w/o ctl register
  libata: allow LLDs w/o any reset method
  ata: replace remaining __FUNCTION__ occurrences

12 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6
Linus Torvalds [Tue, 11 Mar 2008 01:45:23 +0000]
Merge git://git./linux/kernel/git/gregkh/usb-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  USB:Update mailing list information in documentation
  USB: fix ehci unlink regressions
  USB: new ftdi_sio device id
  USB: Remove __KERNEL__ check from non-exported gadget.h.
  USB: g_printer.h does not need to be "unifdef"ed.
  USB: fsl_usb2_udc: fix broken Kconfig
  USB: option: add novatel device ids
  USB: usbaudio: handle kcalloc failure
  USB: cypress_m8: add UPS Powercom (0d9f:0002)
  USB: drivers/usb/storage/sddr55.c: fix uninitialized var warnings
  USB: fix usb-serial generic recursive lock

12 years agofix BIOS PCI config cycle buglet causing ACPI boot regression
Ingo Molnar [Mon, 10 Mar 2008 17:04:34 +0000]
fix BIOS PCI config cycle buglet causing ACPI boot regression

I figured out another ACPI related regression today.

randconfig testing triggered an early boot-time hang on a laptop of mine
(32-bit x86, config attached) - the screen was scrolling ACPI AML
exceptions [with no serial port and no early debugging available].

v2.6.24 works fine on that laptop with the same .config, so after a few
hours of bisection (had to restart it 3 times - other regressions
interacted), it honed in on this commit:

10270d4838bdc493781f5a1cf2e90e9c34c9142f is first bad commit
|
| Author: Linus Torvalds <torvalds@woody.linux-foundation.org>
| Date:   Wed Feb 13 09:56:14 2008 -0800
|
|     acpi: fix acpi_os_read_pci_configuration() misuse of raw_pci_read()

reverting this commit ontop of -rc5 gave a correctly booting kernel.

But this commit fixes a real bug so the real question is, why did it
break the bootup?

After quite some head-scratching, the following change stood out:

-                               pci_id->bus = tu8;
+                               pci_id->bus = val;

pci_id->bus is defined as u16:

   struct acpi_pci_id {
           u16 segment;
           u16 bus;
   ...

and 'tu8' changed from u8 to u32. So previously we'd unconditionally
mask the return value of acpi_os_read_pci_configuration()
(raw_pci_read()) to 8 bits, but now we just trust whatever comes back
from the PCI access routines and only crop it to 16 bits.

But if the high 8 bits of that result contains any noise then we'll
write that into ACPI's PCI ID descriptor and confuse the heck out of the
rest of ACPI.

So lets check the PCI-BIOS code on that theory. We have this codepath
for 8-bit accesses (arch/x86/pci/pcbios.c:pci_bios_read()):

        switch (len) {
        case 1:
                __asm__("lcall *(%%esi); cld\n\t"
                        "jc 1f\n\t"
                        "xor %%ah, %%ah\n"
                        "1:"
                        : "=c" (*value),
                          "=a" (result)
                        : "1" (PCIBIOS_READ_CONFIG_BYTE),
                          "b" (bx),
                          "D" ((long)reg),
                          "S" (&pci_indirect));

Aha! The "=a" output constraint puts the full 32 bits of EAX into
*value. But if the BIOS's routines set any of the high bits to nonzero,
we'll return a value with more set in it than intended.

The other, more common PCI access methods (v1 and v2 PCI reads) clear
out the high bits already, for example pci_conf1_read() does:

        switch (len) {
        case 1:
                *value = inb(0xCFC + (reg & 3));

which explicitly converts the return byte up to 32 bits and zero-extends
it.

So zero-extending the result in the PCI-BIOS read routine fixes the
regression on my laptop. ( It might fix some other long-standing issues
we had with PCI-BIOS during the past decade ... ) Both 8-bit and 16-bit
accesses were buggy.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/pci-2.6
Linus Torvalds [Tue, 11 Mar 2008 01:05:47 +0000]
Merge git://git./linux/kernel/git/gregkh/pci-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/pci-2.6:
  PCI Hotplug: Fix small mem leak in IBM Hot Plug Controller Driver
  PCI: rename DECLARE_PCI_DEVICE_TABLE to DEFINE_PCI_DEVICE_TABLE

12 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6
Linus Torvalds [Tue, 11 Mar 2008 01:04:00 +0000]
Merge git://git./linux/kernel/git/gregkh/driver-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6:
  drivers: fix dma_get_required_mask
  firmware: provide stubs for the FW_LOADER=n case
  nozomi: fix initialization and early flow control access
  sysdev: fix problem with sysdev_class being re-registered

12 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus
Linus Torvalds [Tue, 11 Mar 2008 01:03:20 +0000]
Merge git://git./linux/kernel/git/rusty/linux-2.6-for-linus

* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  lguest: Do not append space to guests kernel command line
  lguest: Revert 1ce70c4fac3c3954bd48c035f448793867592bc0, fix real problem.
  lguest: Sanitize the lguest clock.
  lguest: fix __get_vm_area usage.
  lguest: make sure cpu is initialized before accessing it

12 years agoMerge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfashe...
Linus Torvalds [Tue, 11 Mar 2008 01:02:59 +0000]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/mfasheh/ocfs2

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2:
  ocfs2: Fix NULL pointer dereferences in o2net
  ocfs2/dlm: dlm_thread should not sleep while holding the dlm_spinlock
  ocfs2/dlm: Print message showing the recovery master
  ocfs2/dlm: Add missing dlm_lockres_put()s
  ocfs2/dlm: Add missing dlm_lockres_put()s in migration path
  ocfs2/dlm: Add missing dlm_lock_put()s
  ocfs2: Fix an endian bug in online resize.
  [PATCH] [OCFS2]: constify function pointer tables
  ocfs2: Fix endian bug in o2dlm protocol negotiation.
  ocfs2: Use dlm_print_one_lock_resource for lock resource print
  [PATCH] fs/ocfs2/dlm/dlmdomain.c: fix printk warning

12 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog
Linus Torvalds [Tue, 11 Mar 2008 01:02:16 +0000]
Merge git://git./linux/kernel/git/wim/linux-2.6-watchdog

* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  [WATCHDOG] make watchdog/hpwdt.c:asminline_call() static
  [WATCHDOG] Remove volatiles from watchdog device structures
  [WATCHDOG] replace remaining __FUNCTION__ occurrences
  [WATCHDOG] hpwdt: Use dmi_walk() instead of own copy
  [WATCHDOG] Fix return value warning in hpwdt
  [WATCHDOG] Fix declaration of struct smbios_entry_point in hpwdt
  [WATCHDOG] it8712f_wdt support for 16-bit timeout values, WDIOC_GETSTATUS

12 years agofbdev: add BF52x EZkit Display driver
Michael Hennerich [Mon, 10 Mar 2008 18:44:04 +0000]
fbdev: add BF52x EZkit Display driver

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Cc: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoBF54x LQ043 Framebuffer driver: Update copyright on previously modified files
Michael Hennerich [Mon, 10 Mar 2008 18:44:03 +0000]
BF54x LQ043 Framebuffer driver: Update copyright on previously modified files

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoBF54x LQ043 Framebuffer driver: fix bug lcd_device_register API breakage
Bryan Wu [Mon, 10 Mar 2008 18:44:03 +0000]
BF54x LQ043 Framebuffer driver: fix bug lcd_device_register API breakage

Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoBF54x LQ043 Framebuffer driver: fix bug NULL for gpio_request label is not allowed
Michael Hennerich [Mon, 10 Mar 2008 18:44:02 +0000]
BF54x LQ043 Framebuffer driver: fix bug NULL for gpio_request label is not allowed

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agostifb: fix crash A1439A CRX (Rattler) graphics card
Helge Deller [Mon, 10 Mar 2008 18:44:01 +0000]
stifb: fix crash A1439A CRX (Rattler) graphics card

Fix kernel crash when stifb driver is used with a A1439A CRX (Rattler)
graphics card.  (Reference:
http://thread.gmane.org/gmane.linux.ports.hppa/1834)

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agombxfb: fix incorrect argument type
Krzysztof Helt [Mon, 10 Mar 2008 18:44:00 +0000]
mbxfb: fix incorrect argument type

Fix wrong pointer type passed into the dev_dbg() function.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Acked-by: Mike Rapoport <mike@compulab.co.il>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoiov_iter_advance() fix
Nick Piggin [Mon, 10 Mar 2008 18:43:59 +0000]
iov_iter_advance() fix

iov_iter_advance() skips over zero-length iovecs, however it does not properly
terminate at the end of the iovec array.  Fix this by checking against
i->count before we skip a zero-length iov.

The bug was reproduced with a test program that continually randomly creates
iovs to writev.  The fix was also verified with the same program and also it
could verify that the correct data was contained in the file after each
writev.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Tested-by: "Kevin Coffman" <kwc@citi.umich.edu>
Cc: "Alexey Dobriyan" <adobriyan@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agorcu: move PREEMPT_RCU config option back under PREEMPT
Paul E. McKenney [Mon, 10 Mar 2008 18:43:57 +0000]
rcu: move PREEMPT_RCU config option back under PREEMPT

The original preemptible-RCU patch put the choice between classic and
preemptible RCU into kernel/Kconfig.preempt, which resulted in build failures
on machines not supporting CONFIG_PREEMPT.  This choice was therefore moved to
init/Kconfig, which worked, but placed the choice between classic and
preemptible RCU at the top level, a very obtuse choice indeed.

This patch changes from the Kconfig "choice" mechanism to a pair of booleans,
only one of which (CONFIG_PREEMPT_RCU) is user-visible, and is located in
kernel/Kconfig.preempt, where one would expect it to be.  The other
(CONFIG_CLASSIC_RCU) is in init/Kconfig so that it is available to all
architectures, hopefully avoiding build breakage.  Thanks to Roman Zippel for
suggesting this approach.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Dipankar Sarma <dipankar@in.ibm.com>
Cc: Josh Triplett <josh@freedesktop.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoi8042: use SGI_HAS_I8042 to select SGI i8042 handlinig
Thomas Bogendoerfer [Mon, 10 Mar 2008 18:43:54 +0000]
i8042: use SGI_HAS_I8042 to select SGI i8042 handlinig

Use SGI_HAS_I8042 to select SGI i8042 handling

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agomodules: warn about suspicious return values from module's ->init() hook
Alexey Dobriyan [Mon, 10 Mar 2008 18:43:53 +0000]
modules: warn about suspicious return values from module's ->init() hook

Return value convention of module's init functions is 0/-E.  Sometimes,
e.g.  during forward-porting mistakes happen and buggy module created,
where result of comparison "workqueue != NULL" is propagated all the way up
to sys_init_module.  What happens is that some other module created
workqueue in question, our module created it again and module was
successfully loaded.

Or it could be some other bug.

Let's make such mistakes much more visible.  In retrospective, such
messages would noticeably shorten some of my head-scratching sessions.

Note, that dump_stack() is just a way to get attention from user.  Sample
message:

sys_init_module: 'foo'->init suspiciously returned 1, it should follow 0/-E convention
sys_init_module: loading module anyway...
Pid: 4223, comm: modprobe Not tainted 2.6.24-25f666300625d894ebe04bac2b4b3aadb907c861 #5

Call Trace:
 [<ffffffff80254b05>] sys_init_module+0xe5/0x1d0
 [<ffffffff8020b39b>] system_call_after_swapgs+0x7b/0x80

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agomodules: fix module waiting for dependent modules' init
Rusty Russell [Mon, 10 Mar 2008 18:43:52 +0000]
modules: fix module waiting for dependent modules' init

Commit c9a3ba55 (module: wait for dependent modules doing init.) didn't quite
work because the waiter holds the module lock, meaning that the state of the
module it's waiting for cannot change.

Fortunately, it's fairly simple to update the state outside the lock and do
the wakeup.

Thanks to Jan Glauber for tracking this down and testing (qdio and qeth).

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agohugetlb: correct page count for surplus huge pages
Adam Litke [Mon, 10 Mar 2008 18:43:50 +0000]
hugetlb: correct page count for surplus huge pages

Free pages in the hugetlb pool are free and as such have a reference count of
zero.  Regular allocations into the pool from the buddy are "freed" into the
pool which results in their page_count dropping to zero.  However, surplus
pages can be directly utilized by the caller without first being freed to the
pool.  Therefore, a call to put_page_testzero() is in order so that such a
page will be handed to the caller with a correct count.

This has not affected end users because the bad page count is reset before the
page is handed off.  However, under CONFIG_DEBUG_VM this triggers a BUG when
the page count is validated.

Thanks go to Mel for first spotting this issue and providing an initial fix.

Signed-off-by: Adam Litke <agl@us.ibm.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agogpio/pca953x bugfix: mark as can_sleep
Arnaud Patard [Mon, 10 Mar 2008 18:43:48 +0000]
gpio/pca953x bugfix: mark as can_sleep

The pca953x driver is an I2C driver so gpio_chip->can_sleep should be set.
This lets upper layers know they should use the gpio_*_cansleep() calls to
access values, and may not access them from nonsleeping contexts.

Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: "eric miao" <eric.y.miao@gmail.com>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agomd: reduce CPU wastage on idle md array with a write-intent bitmap
NeilBrown [Mon, 10 Mar 2008 18:43:48 +0000]
md: reduce CPU wastage on idle md array with a write-intent bitmap

Recent patch titled
  Reduce CPU wastage on idle md array with a write-intent bitmap.

would sometimes leave the array with dirty bitmap bits that stay dirty.  A
subsequent write would sort things out so it isn't a big problem, but should
be fixed nonetheless.

We need to make sure that when the bitmap becomes not "allclean", the
daemon_sleep really does get set to a sensible value.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agomd: fix formatting error in /proc/mdstat
NeilBrown [Mon, 10 Mar 2008 18:43:47 +0000]
md: fix formatting error in /proc/mdstat

If an md array is "auto-read-only", then this appears in /proc/mdstat as

   /dev/md0: active(auto-read-only)

whereas if it is truely readonly, it appears as

   /dev/md0: active (read-only)

The difference being a space.

One program known to parse this file expects the space and gets badly
confused.  It will be fixed, but it would be best if what the kernel generates
is more consistent too.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agomempolicy: fix reference counting bugs
Lee Schermerhorn [Mon, 10 Mar 2008 18:43:45 +0000]
mempolicy: fix reference counting bugs

Address 3 known bugs in the current memory policy reference counting method.
I have a series of patches to rework the reference counting to reduce overhead
in the allocation path.  However, that series will require testing in -mm once
I repost it.

1) alloc_page_vma() does not release the extra reference taken for
   vma/shared mempolicy when the mode == MPOL_INTERLEAVE.  This can result in
   leaking mempolicy structures.  This is probably occurring, but not being
   noticed.

   Fix:  add the conditional release of the reference.

2) hugezonelist unconditionally releases a reference on the mempolicy when
   mode == MPOL_INTERLEAVE.  This can result in decrementing the reference
   count for system default policy [should have no ill effect] or premature
   freeing of task policy.  If this occurred, the next allocation using task
   mempolicy would use the freed structure and probably BUG out.

   Fix:  add the necessary check to the release.

3) The current reference counting method assumes that vma 'get_policy()'
   methods automatically add an extra reference a non-NULL returned mempolicy.
    This is true for shmem_get_policy() used by tmpfs mappings, including
   regular page shm segments.  However, SHM_HUGETLB shm's, backed by
   hugetlbfs, just use the vma policy without the extra reference.  This
   results in freeing of the vma policy on the first allocation, with reuse of
   the freed mempolicy structure on subsequent allocations.

   Fix: Rather than add another condition to the conditional reference
   release, which occur in the allocation path, just add a reference when
   returning the vma policy in shm_get_policy() to match the assumptions.

Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Greg KH <greg@kroah.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: David Rientjes <rientjes@google.com>
Cc: <eric.whitney@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoTypo in Documentation/scheduler/sched-stats.txt
Masatake YAMATO [Mon, 10 Mar 2008 18:43:43 +0000]
Typo in Documentation/scheduler/sched-stats.txt

I have found a very small typo in Documentation/scheduler/sched-stats.txt.
See the end of this mail.

Signed-off-by: Masatake YAMATO <yamato@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agomemstick: add support for JMicron jmb38x MemoryStick host controller
Alex Dubov [Mon, 10 Mar 2008 18:43:43 +0000]
memstick: add support for JMicron jmb38x MemoryStick host controller

Signed-off-by: Alex Dubov <oakad@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agomemstick: try harder to recover from unsuccessful interface mode switch
Alex Dubov [Mon, 10 Mar 2008 18:43:42 +0000]
memstick: try harder to recover from unsuccessful interface mode switch

Signed-off-by: Alex Dubov <oakad@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agomemstick: fix parsing of "assembly_date" attribute field
Alex Dubov [Mon, 10 Mar 2008 18:43:42 +0000]
memstick: fix parsing of "assembly_date" attribute field

Signed-off-by: Alex Dubov <oakad@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agomemstick: add support for decoding "specfile" media attributes
Alex Dubov [Mon, 10 Mar 2008 18:43:41 +0000]
memstick: add support for decoding "specfile" media attributes

Signed-off-by: Alex Dubov <oakad@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agotifm: clear interrupt mask bits before setting them on adapter init
Alex Dubov [Mon, 10 Mar 2008 18:43:41 +0000]
tifm: clear interrupt mask bits before setting them on adapter init

This should improve reliability of detection of cards already in socket on
driver load.

Signed-off-by: Alex Dubov <oakad@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agotifm: fix memorystick host initialization code
Alex Dubov [Mon, 10 Mar 2008 18:43:40 +0000]
tifm: fix memorystick host initialization code

Instead of assuming that host is powered on only once at card insertion, allow
for the possibility that memstick layer may need to cycle card's power to get
it out from some unhealthy states.

Signed-off-by: Alex Dubov <oakad@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agotifm: fix the MemoryStick host fifo handling code
Alex Dubov [Mon, 10 Mar 2008 18:43:40 +0000]
tifm: fix the MemoryStick host fifo handling code

Additional input received from JMicron on MemoryStick host interfaces showed
that some assumtions in fifo handling code were incorrect.  This patch also
fixes data corruption used to occure during PIO transfers.

Signed-off-by: Alex Dubov <oakad@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agomemstick: drop DRIVER_VERSION numbers as meaningless
Alex Dubov [Mon, 10 Mar 2008 18:43:39 +0000]
memstick: drop DRIVER_VERSION numbers as meaningless

Signed-off-by: Alex Dubov <oakad@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agomemstick: make sure number of command retries is exactly as specified
Alex Dubov [Mon, 10 Mar 2008 18:43:38 +0000]
memstick: make sure number of command retries is exactly as specified

Signed-off-by: Alex Dubov <oakad@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agomemstick: add memstick_suspend/resume_host methods
Alex Dubov [Mon, 10 Mar 2008 18:43:38 +0000]
memstick: add memstick_suspend/resume_host methods

Bus driver may need to be informed that host is being suspended/resumed.

Signed-off-by: Alex Dubov <oakad@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agomemstick: introduce correct definitions in the header
Alex Dubov [Mon, 10 Mar 2008 18:43:37 +0000]
memstick: introduce correct definitions in the header

Thanks to some input from kind people at JMicron it is now possible to have
more correct definitions of protocol structures and bit field semantics.

Signed-off-by: Alex Dubov <oakad@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agotridentfb: fix memory size detection
Krzysztof Helt [Mon, 10 Mar 2008 18:43:37 +0000]
tridentfb: fix memory size detection

Fix memory size multiplier during detection.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agotridentfb: register should be left in non-locked state
Krzysztof Helt [Mon, 10 Mar 2008 18:43:36 +0000]
tridentfb: register should be left in non-locked state

Remove locking registers after they are unlocked during switch to/from MMIO
mode.  This fixes regression on the Blade3D (Trident 9880) caused by the
previous patch (probe fixes).

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoof_serial: fix section mismatch warnings
Josh Boyer [Mon, 10 Mar 2008 18:43:35 +0000]
of_serial: fix section mismatch warnings

Fix the following section mismatches:

WARNING: drivers/built-in.o(.exit.text+0x5a): Section mismatch in reference from the function of_platform_serial_exit() to the variable .devinit.data:of_platform_serial_driver
The function __exit of_platform_serial_exit() references
a variable __devinitdata of_platform_serial_driver.

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agorename DECLARE_PCI_DEVICE_TABLE to DEFINE_PCI_DEVICE_TABLE
Andrew Morton [Mon, 10 Mar 2008 18:43:34 +0000]
rename DECLARE_PCI_DEVICE_TABLE to DEFINE_PCI_DEVICE_TABLE

This macro is used to define tables, not to declare them.

Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years ago[libata] Add support for the RB500 PATA CompactFlash
Florian Fainelli [Thu, 6 Mar 2008 11:25:21 +0000]
[libata] Add support for the RB500 PATA CompactFlash

Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years agoahci: logical-bitwise and confusion in ahci_save_initial_config()
Roel Kluin [Sun, 9 Mar 2008 20:42:40 +0000]
ahci: logical-bitwise and confusion in ahci_save_initial_config()

logical-bitwise & confusion

Signed-off-by: Roel Kluin <12o3l@tiscali.nl>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years agolibata: don't allow sysfs read access to force param
Tejun Heo [Sun, 9 Mar 2008 11:21:53 +0000]
libata: don't allow sysfs read access to force param

Buffer for force param is deallocated after initialization, so trying
to read it via sysfs results in oops.  Don't allow read access to the
param node.

Spotted by Eric Sesterhenn.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years agoahci: add the Device IDs for nvidia MCP7B AHCI
peerchen [Thu, 6 Mar 2008 13:22:41 +0000]
ahci: add the Device IDs for nvidia MCP7B AHCI

Signed-off-by: Peer Chen <peerchen@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years agolibata-sff: handle controllers w/o ctl register
Tejun Heo [Thu, 6 Mar 2008 04:12:54 +0000]
libata-sff: handle controllers w/o ctl register

SFF incorrectly assumed that ctl register is available for all
controllers while some old SFF controllers don't have ctl register.
Make SFF handle controllers w/o ctl register by conditionalizing ctl
register access and softreset method.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years agolibata: allow LLDs w/o any reset method
Tejun Heo [Thu, 6 Mar 2008 04:09:34 +0000]
libata: allow LLDs w/o any reset method

Some old SFF controllers don't have any way to reset the channel.
Currently, this isn't supported and libata EH causes an oops.  Allow
LLDs w/o any reset method and just assume ATA class in such cases.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years agoata: replace remaining __FUNCTION__ occurrences
Harvey Harrison [Thu, 6 Mar 2008 02:24:52 +0000]
ata: replace remaining __FUNCTION__ occurrences

__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years agoUSB:Update mailing list information in documentation
Robert P. J. Day [Fri, 7 Mar 2008 20:08:17 +0000]
USB:Update mailing list information in documentation

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years agoUSB: fix ehci unlink regressions
David Brownell [Fri, 7 Mar 2008 21:49:42 +0000]
USB: fix ehci unlink regressions

The recent EHCI driver update to split the IAA watchdog timer out from
the other timers made several things work better, but not everything;
and it created a couple new issues in bugzilla.  Ergo this patch:

  - Handle a should-be-rare SMP race between the watchdog firing
    and (very late) IAA interrupts;

  - Remove a shouldn't-have-been-added WARN_ON() test;

  - Guard against one observed OOPS;

  - If this watchdog fires during clean HC shutdown, it should act
    as a NOP instead of interfering with the shutdown sequence;

  - Guard against silicon errata hypothesized by some vendors:
      * IAA status latch broken, but IAAD cleared OK;
      * IAAD wasn't cleared when IAA status got reported;

The WARN_ON is in bugzilla as 10168; the OOPS as 10078; these are
both regressions.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Tested-by: Gordon Farquharson <gordonfarquharson@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years agoUSB: new ftdi_sio device id
Mirko Bordignon [Mon, 10 Mar 2008 10:38:55 +0000]
USB: new ftdi_sio device id

Here is a patch that adds support for the propox jtagcable II dongle
(http://www.propox.com/products/t_117.html): their PID was missing,
therefore we were not able to have the device recognized though it uses
a standard FTDI chip.

Signed-off-by: Mirko Bordignon <mirko.bordignon@ieee.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years agoUSB: Remove __KERNEL__ check from non-exported gadget.h.
Robert P. J. Day [Fri, 7 Mar 2008 16:40:07 +0000]
USB: Remove __KERNEL__ check from non-exported gadget.h.

Since the header file gadget.h isn't being exported to userspace,
there seems to be little point having a __KERNEL__ proprocessor check.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years agoUSB: g_printer.h does not need to be "unifdef"ed.
Robert P. J. Day [Fri, 7 Mar 2008 16:02:00 +0000]
USB: g_printer.h does not need to be "unifdef"ed.

Since the header file g_printer.h doesn't depend on __KERNEL__,
there's no need to unifdef it in the Kbuild file.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years agoUSB: fsl_usb2_udc: fix broken Kconfig
Li Yang [Thu, 6 Mar 2008 10:40:07 +0000]
USB: fsl_usb2_udc: fix broken Kconfig

The patch fixes broken Kconfig caused by the name change of MPC834x option.
It also makes fsl_usb2_udc selectable on new platforms like MPC837x.

Signed-off-by: Li Yang <leoli@freescale.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years agoUSB: option: add novatel device ids
Dirk DeSchepper [Wed, 5 Mar 2008 08:26:18 +0000]
USB: option: add novatel device ids

This updates the option driver with a lot more novatel driver ids.

From: Dirk DeSchepper <ddeschepper@nvtl.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years agoUSB: usbaudio: handle kcalloc failure
Jim Meyering [Tue, 4 Mar 2008 23:25:11 +0000]
USB: usbaudio: handle kcalloc failure

sound/usb/usbaudio.c (check_hw_params_convention): Handle kcalloc failure.

Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years agoUSB: cypress_m8: add UPS Powercom (0d9f:0002)
Dmitry Shapin [Tue, 4 Mar 2008 23:25:10 +0000]
USB: cypress_m8: add UPS Powercom (0d9f:0002)

Add support for UPS Powercom USB interface (0d9f:0002) in chip CY7C63723.
In my case, this Powercom BNT800AP.

Signed-off-by: Dmitry Shapin <shapin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years agoUSB: drivers/usb/storage/sddr55.c: fix uninitialized var warnings
Andrew Morton [Tue, 4 Mar 2008 23:25:08 +0000]
USB: drivers/usb/storage/sddr55.c: fix uninitialized var warnings

drivers/usb/storage/sddr55.c: In function 'sddr55_transport':
drivers/usb/storage/sddr55.c:526: warning: 'deviceID' may be used uninitialized in this function
drivers/usb/storage/sddr55.c:525: warning: 'manufacturerID' may be used uninitialized in this function

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years agoUSB: fix usb-serial generic recursive lock
Pete Zaitcev [Wed, 5 Mar 2008 07:28:42 +0000]
USB: fix usb-serial generic recursive lock

Nobody should be using the generic usb-serial for anything other than
testing. Still, it's not a good thing that it's easy to lock up. There
is a traceback from NMI oopser here:
 https://bugzilla.redhat.com/show_bug.cgi?id=431379

But in short, if a line discipline has a chance to echo anything, input
can loop back a write method. So, don't call tty_flip_buffer_push from
under a lock taken on write path.

Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years agoPCI Hotplug: Fix small mem leak in IBM Hot Plug Controller Driver
Jesper Juhl [Sat, 8 Mar 2008 01:16:07 +0000]
PCI Hotplug: Fix small mem leak in IBM Hot Plug Controller Driver

In drivers/pci/hotplug/ibmphp_ebda.c::ebda_rsrc_controller(), storage is
allocated with kzalloc() and assigned to 'tmp_slot'.  Then lots of
stuff, like ->flag, ->supported_speed etc is set in tmp_slot.  A bit
further down there's then this test :

  if (!bus_info_ptr1) {
    rc = -ENODEV;
    goto error;
  }

At this point, tmp_slot has not been assigned to anything, so when
erroring-out we want to free it, but nothing at the 'error:' label
free's 'tmp_slot' - and we can't really free 'tmp_slot' at 'error:'
since we may jump to that label later when 'tmp_slot' *has* been used
and we do not want it freed. So, the only sane option left seems to be
to kfree(tmp_slot) just before jumping to the 'error:' label in the one
place where this is what actually makes sense. The following patch does
just that and thus kills off a tiny potential memory leak.

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years agoPCI: rename DECLARE_PCI_DEVICE_TABLE to DEFINE_PCI_DEVICE_TABLE
Andrew Morton [Thu, 6 Mar 2008 23:41:50 +0000]
PCI: rename DECLARE_PCI_DEVICE_TABLE to DEFINE_PCI_DEVICE_TABLE

a) DECLARE_PCI_DEVICE_TABLE is misnamed.  It is used to *define* tables,
   not to declare them.  It should be called DEFINE_PCI_DEVICE_TABLE.

b) It's lame, anyway.  We could implement any number of such helper
   thingies, but we choose not to.

So I wouldn't go adding code which uses this thing until it has a correct
name, and until we've decided that we actually want to live with it.

From: Andrew Morton <akpm@linux-foundation.org>
Cc: Jonas Bonn <jonas@southpole.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years agodrivers: fix dma_get_required_mask
James Bottomley [Sun, 9 Mar 2008 16:57:56 +0000]
drivers: fix dma_get_required_mask

There's a bug in the current implementation of dma_get_required_mask()
where it ands the returned mask with the current device mask.  This
rather defeats the purpose if you're using the call to determine what
your mask should be (since you will at that time have the default
DMA_32BIT_MASK).  This bug results in any driver that uses this function
*always* getting a 32 bit mask, which is wrong.

Fix by removing the and with dev->dma_mask.

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years agofirmware: provide stubs for the FW_LOADER=n case
James Bottomley [Fri, 7 Mar 2008 14:57:54 +0000]
firmware: provide stubs for the FW_LOADER=n case

libsas has a case where it uses the firmware loader to provide services,
but doesn't want to select it all the time.  This currently causes a
compile failure in libsas if FW_LOADER=n.  Fix this by providing error
stubs for the firmware loader API in the FW_LOADER=n case.

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years agonozomi: fix initialization and early flow control access
Frank Seidel [Thu, 6 Mar 2008 20:45:57 +0000]
nozomi: fix initialization and early flow control access

Due to some flaws in the initialization and flow control
code kernel oopses could be triggered e.g. when accessing
the card too early after insertion.
See e.g. kernel.org bug #10077.
The main part of the fix is a trivial state management
making sure the card is realy ready to use before allowing
any access.

Signed-off-by: Frank Seidel <fseidel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years agosysdev: fix problem with sysdev_class being re-registered
Greg Kroah-Hartman [Sat, 8 Mar 2008 22:07:16 +0000]
sysdev: fix problem with sysdev_class being re-registered

We need to initialize the kobject for a sysdev_class as it could have
been recycled (stupid static kobjects...)

We also do the same thing in case sysdev devices are being
re-registered.

Thanks to Balaji Rao <balajirrao@gmail.com> for pointing out the
problem.

Signed-off-by: Balaji Rao <balajirrao@gmail.com>
Tested-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years agolguest: Do not append space to guests kernel command line
Paul Bolle [Mon, 10 Mar 2008 15:39:03 +0000]
lguest: Do not append space to guests kernel command line

The lguest launcher appends a space to the kernel command line (if kernel
arguments are specified on its command line). This space is unneeded. More
importantly, this appended space will make Red Hat's nash script interpreter
(used in a Fedora style initramfs) add an empty argument to init's command
line. This empty argument will make kernel arguments like "init=/bin/bash"
fail (because the shell will try to execute a script with an empty name).
This could be considered a bug in nash, but is easily fixed in the lguest
launcher too.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

12 years agolguest: Revert 1ce70c4fac3c3954bd48c035f448793867592bc0, fix real problem.
Rusty Russell [Tue, 11 Mar 2008 14:35:57 +0000]
lguest: Revert 1ce70c4fac3c3954bd48c035f448793867592bc0, fix real problem.

Ahmed managed to crash the Host in release_pgd(), which cannot be a Guest
bug, and indeed it wasn't.

The bug was that handing a 0 as the address of the toplevel page table
being manipulated can cause the lookup code in find_pgdir() to return
an uninitialized cache entry (we shadow up to 4 top level page tables
for each Guest).

Commit 37cc8d7f963ba2deec29c9b68716944516a3244f introduced this
behaviour in the Guest, uncovering the bug.

The patch which he submitted (which removed the /4 from the index
calculation) simply ensured that these high-indexed entries hit the
early exit path of guest_set_pmd().  But you get lots of segfaults in
guest userspace as the PMDs aren't being updated.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

12 years agolguest: Sanitize the lguest clock.
Rusty Russell [Tue, 11 Mar 2008 14:35:56 +0000]
lguest: Sanitize the lguest clock.

Now the TSC code handles a zero return from calculate_cpu_khz(),
lguest can simply pass through the value it gets from the Host: if
non-zero, all the normal TSC code applies.

Otherwise (or if the Host really doesn't support TSC), the clocksource
code will fall back to the slower but reasonable lguest clock.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

12 years agolguest: fix __get_vm_area usage.
Rusty Russell [Tue, 11 Mar 2008 14:35:56 +0000]
lguest: fix __get_vm_area usage.

Robert Bragg's 5dc331852848a38ca00a2817e5b98a1d0561b116 tightened
(ie. fixed) the checking in __get_vm_area, and it broke lguest.

lguest should pass the exact "end" it wants, not some random constant
(it was possible previously that it would actually get an address
different from SWITCHER_ADDR).

Also, Fabio Checconi pointed out that we should make sure we're not
hitting the fixmap area.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Robert Bragg <robert@sixbynine.org>

12 years agolguest: make sure cpu is initialized before accessing it
Eugene Teo [Sat, 9 Feb 2008 15:53:17 +0000]
lguest: make sure cpu is initialized before accessing it

If req is LHREQ_INITIALIZE, and the guest has been initialized before
(unlikely), it will attempt to access cpu->tsk even though cpu is not yet
initialized.

Signed-off-by: Eugene Teo <eugeneteo@kernel.sg>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

12 years agoocfs2: Fix NULL pointer dereferences in o2net
Tao Ma [Wed, 5 Mar 2008 07:49:55 +0000]
ocfs2: Fix NULL pointer dereferences in o2net

In some situations, ocfs2_set_nn_state might get called with sc = NULL and
valid = 0. If sc = NULL, we can't dereference it to get the o2nm_node
member. Instead, do what o2net_initialize_handshake does and use NULL when
calling o2net_reconnect_delay and o2net_idle_timeout.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>

12 years agoocfs2/dlm: dlm_thread should not sleep while holding the dlm_spinlock
Sunil Mushran [Sat, 1 Mar 2008 22:04:25 +0000]
ocfs2/dlm: dlm_thread should not sleep while holding the dlm_spinlock

This patch addresses the bug in which the dlm_thread could go to sleep
while holding the dlm_spinlock.

Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>

12 years agoocfs2/dlm: Print message showing the recovery master
Sunil Mushran [Sat, 1 Mar 2008 22:04:24 +0000]
ocfs2/dlm: Print message showing the recovery master

Knowing the dlm recovery master helps in debugging recovery
issues. This patch prints a message on the recovery master node.

Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>

12 years agoocfs2/dlm: Add missing dlm_lockres_put()s
Sunil Mushran [Sat, 1 Mar 2008 22:04:22 +0000]
ocfs2/dlm: Add missing dlm_lockres_put()s

dlm_master_request_handler() forgot to put a lockres when
dlm_assert_master_worker() failed or was skipped.

Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>

12 years agoocfs2/dlm: Add missing dlm_lockres_put()s in migration path
Sunil Mushran [Sat, 1 Mar 2008 22:04:21 +0000]
ocfs2/dlm: Add missing dlm_lockres_put()s in migration path

During migration, the recovery master node may be asked to master a lockres
it may not know about. In that case, it would not only have to create a
lockres and add it to the hash, but also remember to to do the _put_
corresponding to the kref_init in dlm_init_lockres(), as soon as the migration
is completed. Yes, we don't wait for the dlm_purge_lockres() to do that
matching put. Note the ref added for it being in the hash protects the lockres
from being freed prematurely.

This patch adds that missing put, as described above, to plug a memleak.

Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>

12 years agoocfs2/dlm: Add missing dlm_lock_put()s
Sunil Mushran [Sat, 1 Mar 2008 22:04:20 +0000]
ocfs2/dlm: Add missing dlm_lock_put()s

Normally locks for remote nodes are freed when that node sends an UNLOCK
message to the master. The master node tags an DLM_UNLOCK_FREE_LOCK action
to do an extra put on the lock at the end.

However, there are times when the master node has to free the locks for the
remote nodes forcibly.

Two cases when this happens are:
1. When the master has migrated the lockres plus all locks to another node.
2. When the master is clearing all the locks of a dead node.

It was in the above two conditions that the dlm was missing the extra put.

Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>

12 years agoocfs2: Fix an endian bug in online resize.
Tao Ma [Mon, 3 Mar 2008 02:53:02 +0000]
ocfs2: Fix an endian bug in online resize.

In ocfs2_group_add, 'cr' is a disk field of type 'ocfs2_chain_rec', and we
were putting cpu byteorder values into it. Swap things to the right endian
before storing.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>

12 years ago[PATCH] [OCFS2]: constify function pointer tables
Jan Engelhardt [Tue, 22 Jan 2008 19:52:20 +0000]
[PATCH] [OCFS2]: constify function pointer tables

Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>

12 years agoocfs2: Fix endian bug in o2dlm protocol negotiation.
Joel Becker [Tue, 12 Feb 2008 22:56:25 +0000]
ocfs2: Fix endian bug in o2dlm protocol negotiation.

struct dlm_query_join_packet is made up of four one-byte fields.  They
are effectively in big-endian order already.  However, little-endian
machines swap them before putting the packet on the wire (because
query_join's response is a status, and that status is treated as a u32
on the wire).  Thus, a big-endian and little-endian machines will
treat this structure differently.

The solution is to have little-endian machines swap the structure when
converting from the structure to the u32 representation.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>

12 years agoocfs2: Use dlm_print_one_lock_resource for lock resource print
Tao Ma [Thu, 28 Feb 2008 02:41:55 +0000]
ocfs2: Use dlm_print_one_lock_resource for lock resource print

__dlm_print_one_lock_resource must be called with spin_lock
the res->spinlock. While in some cases, we use it without this
precondition and lead to the failure of assert_spin_locked.
So call dlm_print_one_lock_resource instead.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>

12 years ago[PATCH] fs/ocfs2/dlm/dlmdomain.c: fix printk warning
Andrew Morton [Fri, 29 Feb 2008 09:56:06 +0000]
[PATCH] fs/ocfs2/dlm/dlmdomain.c: fix printk warning

fs/ocfs2/dlm/dlmdomain.c: In function 'dlm_send_join_cancels':
fs/ocfs2/dlm/dlmdomain.c:983: warning: format '%u' expects type 'unsigned int', but argument 7 has type 'long unsigned int'

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>

12 years agoriscom8: Fix hang on load
Alan Cox [Mon, 10 Mar 2008 13:24:49 +0000]
riscom8: Fix hang on load

This has been around for a while but nobody reported it until recently.
Resubmitting the fix as it's appropriate for 2.6.25

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoLinux 2.6.25-rc5
Linus Torvalds [Mon, 10 Mar 2008 05:22:27 +0000]
Linux 2.6.25-rc5

12 years agoDo not include linux/backing-dev.h twice
Jesper Juhl [Mon, 10 Mar 2008 00:12:08 +0000]
Do not include linux/backing-dev.h twice

Don't include linux/backing-dev.h twice in mm/filemap.c, it's pointless.

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoRDMA/cxgb3: Fix iwch_create_cq() off-by-one error
Jon Mason [Sun, 9 Mar 2008 20:54:12 +0000]
RDMA/cxgb3: Fix iwch_create_cq() off-by-one error

The cxbg3 driver is unnecessarily decreasing the number of CQ entries by
one when creating a CQ.  This will cause the CQ not to have as many
entries as requested by the user if the user requests a power of 2 size.

Signed-off-by: Jon Mason <jon@opengridcomputing.com>
Acked-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

12 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/tglx/linux-2.6-hrt
Linus Torvalds [Sun, 9 Mar 2008 17:06:49 +0000]
Merge git://git./linux/kernel/git/tglx/linux-2.6-hrt

* git://git.kernel.org/pub/scm/linux/kernel/git/tglx/linux-2.6-hrt:
  time: remove obsolete CLOCK_TICK_ADJUST
  time: don't touch an offlined CPU's ts->tick_stopped in tick_cancel_sched_timer()
  time: prevent the loop in timespec_add_ns() from being optimised away
  ntp: use unsigned input for do_div()

12 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Linus Torvalds [Sun, 9 Mar 2008 17:06:14 +0000]
Merge git://git./linux/kernel/git/herbert/crypto-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  [CRYPTO] skcipher: Fix section mismatches

12 years agoalpha: fix iommu-related boot panic
Ivan Kokshaysky [Sun, 9 Mar 2008 13:31:17 +0000]
alpha: fix iommu-related boot panic

This fixes a boot panic due to a typo in the recent iommu patchset from
FUJITA Tomonori <tomof@acm.org> - the code used dma_get_max_seg_size()
instead of dma_get_seg_boundary().

It also removes a couple of unnecessary BUG_ON() and ALIGN() macros.

Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Reported-and-tested-by: Bob Tracy <rct@frus.com>
Acked-by: FUJITA Tomonori <tomof@acm.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agocpu hotplug: adjust root-domain->online span in response to hotplug event
Gregory Haskins [Sat, 8 Mar 2008 05:10:15 +0000]
cpu hotplug: adjust root-domain->online span in response to hotplug event

We currently set the root-domain online span automatically when the
domain is added to the cpu if the cpu is already a member of
cpu_online_map.

This was done as a hack/bug-fix for s2ram, but it also causes a problem
with hotplug CPU_DOWN transitioning.  The right way to fix the original
problem is to actually respond to CPU_UP events, instead of CPU_ONLINE,
which is already too late.

This solves the hung reboot regression reported by Andrew Morton and
others.

Signed-off-by: Gregory Haskins <ghaskins@novell.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>