10 years agocrypto: xcbc - Switch to shash
Herbert Xu [Sun, 12 Jul 2009 04:48:32 +0000]
crypto: xcbc - Switch to shash

This patch converts the xcbc algorithm to the new shash type.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agocrypto: hmac - Switch to shash
Herbert Xu [Thu, 9 Jul 2009 04:43:37 +0000]
crypto: hmac - Switch to shash

This patch changes hmac to the new shash interface.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agocrypto: padlock - Switch sha to shash
Herbert Xu [Sat, 11 Jul 2009 10:16:16 +0000]
crypto: padlock - Switch sha to shash

This patch converts the padlock-sha implementation to shash.
In doing so the existing mechanism of storing the data until
final is no longer viable as we do not have a way of allocating
data in crypto_shash_init and then reliably freeing it.

This is just as well because a better way of handling the problem
is to hash everything but the last chunk using normal sha code
and then provide the intermediate result to the padlock device.

This is good enough because the primary application of padlock-sha
is IPsec and there the data is laid out in the form of an hmac
header followed by the rest of the packet.  In essence we can
provide all the data to the padlock as the hmac header only needs
to be hashed once.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agocrypto: shash - Make descsize a run-time attribute
Herbert Xu [Tue, 14 Jul 2009 04:50:12 +0000]
crypto: shash - Make descsize a run-time attribute

This patch changes descsize to a run-time attribute so that
implementations can change it in their init functions.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agocrypto: async - Use kzfree for requests
Herbert Xu [Sat, 11 Jul 2009 14:22:14 +0000]
crypto: async - Use kzfree for requests

This patch changes the kfree call to kzfree for async requests.
As the request may contain sensitive data it needs to be zeroed
before it can be reallocated by others.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agocrypto: shash - Move null setkey check to registration time
Herbert Xu [Sat, 11 Jul 2009 14:17:39 +0000]
crypto: shash - Move null setkey check to registration time

This patch moves the run-time null setkey check to shash_prepare_alg
just like we did for finup/digest.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agocrypto: padlock - Use shash fallback for sha
Herbert Xu [Fri, 10 Jul 2009 09:26:44 +0000]
crypto: padlock - Use shash fallback for sha

This patch changes padlock sha fallback to shash instead of hash.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agocrypto: sha256-s390 - Add export/import support
Herbert Xu [Fri, 10 Jul 2009 05:20:32 +0000]
crypto: sha256-s390 - Add export/import support

This patch adds export/import support to sha256-s390.  The exported
type is defined by struct sha256_state, which is basically the entire
descriptor state of sha256_generic.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agocrypto: sha1-s390 - Add export/import support
Herbert Xu [Fri, 10 Jul 2009 05:18:26 +0000]
crypto: sha1-s390 - Add export/import support

This patch adds export/import support to sha1-s390.  The exported
type is defined by struct sha1_state, which is basically the entire
descriptor state of sha1_generic.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agocrypto: sha256_generic - Add export/import support
Herbert Xu [Fri, 10 Jul 2009 05:00:27 +0000]
crypto: sha256_generic - Add export/import support

This patch adds export/import support to sha256_generic.  The exported
type is defined by struct sha256_state, which is basically the entire
descriptor state of sha256_generic.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agocrypto: sha256_generic - Use 64-bit counter like sha1
Herbert Xu [Fri, 10 Jul 2009 04:54:20 +0000]
crypto: sha256_generic - Use 64-bit counter like sha1

This patch replaces the two 32-bit counter code in sha256_generic
with the simpler 64-bit counter code from sha1.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agocrypto: sha1_generic - Add export/import support
Herbert Xu [Thu, 9 Jul 2009 13:27:13 +0000]
crypto: sha1_generic - Add export/import support

This patch adds export/import support to sha1_generic.  The exported
type is defined by struct sha1_state, which is basically the entire
descriptor state of sha1_generic.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agocrypto: shash - Move finup/digest null checks to registration time
Herbert Xu [Thu, 9 Jul 2009 12:36:44 +0000]
crypto: shash - Move finup/digest null checks to registration time

This patch moves the run-time null finup/digest checks to the
shash_prepare_alg function which is run at registration time.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agocrypto: shash - Export/import hash state only
Herbert Xu [Thu, 9 Jul 2009 12:30:57 +0000]
crypto: shash - Export/import hash state only

This patch replaces the full descriptor export with an export of
the partial hash state.  This allows the use of a consistent export
format across all implementations of a given algorithm.

This is useful because a number of cases require the use of the
partial hash state, e.g., PadLock can use the SHA1 hash state
to get around the fact that it can only hash contiguous data
chunks.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agocrypto: api - Fix crypto_drop_spawn crash on blank spawns
Herbert Xu [Thu, 9 Jul 2009 03:34:06 +0000]
crypto: api - Fix crypto_drop_spawn crash on blank spawns

This patch allows crypto_drop_spawn to be called on spawns that
have not been initialised or have failed initialisation.  This
fixes potential crashes during initialisation without adding
special case code.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agocrypto: shash - Add shash_instance_ctx
Herbert Xu [Thu, 9 Jul 2009 03:32:55 +0000]
crypto: shash - Add shash_instance_ctx

This patch adds the helper shash_instance_ctx which is the shash
analogue of crypto_instance_ctx.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agocrypto: shash - Propagate reinit return value
Herbert Xu [Wed, 8 Jul 2009 15:39:01 +0000]
crypto: shash - Propagate reinit return value

This patch fixes crypto_shash_import to propagate the value returned
by reinit.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agocrypto: shash - Use finup in default digest
Herbert Xu [Wed, 8 Jul 2009 15:32:08 +0000]
crypto: shash - Use finup in default digest

This patch simplifies the default digest function by using finup.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agocrypto: shash - Add __crypto_shash_cast
Herbert Xu [Wed, 8 Jul 2009 14:36:36 +0000]
crypto: shash - Add __crypto_shash_cast

This patch adds __crypto_shash_cast which turns a crypto_tfm
into crypto_shash.  It's analogous to the other __crypto_*_cast
functions.

It hasn't been needed until now since no existing shash algorithms
have had an init function.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agocrypto: shash - Add crypto_shash_ctx_aligned
Herbert Xu [Wed, 8 Jul 2009 14:32:07 +0000]
crypto: shash - Add crypto_shash_ctx_aligned

This patch adds crypto_shash_ctx_aligned which will be needed
by hmac after its conversion to shash.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agocrypto: shash - Add shash_register_instance
Herbert Xu [Wed, 8 Jul 2009 10:46:23 +0000]
crypto: shash - Add shash_register_instance

This patch adds shash_register_instance so that shash instances
can be registered without bypassing the shash checks applied to
normal algorithms.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agocrypto: shash - Add shash_attr_alg2 helper
Herbert Xu [Wed, 8 Jul 2009 09:56:28 +0000]
crypto: shash - Add shash_attr_alg2 helper

This patch adds the helper shash_attr_alg2 which locates a shash
algorithm based on the information in the given attribute.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agocrypto: api - Add crypto_attr_alg2 helper
Herbert Xu [Wed, 8 Jul 2009 09:53:16 +0000]
crypto: api - Add crypto_attr_alg2 helper

This patch adds the helper crypto_attr_alg2 which is similar to
crypto_attr_alg but takes an extra frontend argument.  This is
intended to be used by new style algorithm types such as shash.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agocrypto: shash - Add spawn support
Herbert Xu [Wed, 8 Jul 2009 09:21:37 +0000]
crypto: shash - Add spawn support

This patch adds the functions needed to create and use shash
spawns, i.e., to use shash algorithms in a template.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agocrypto: api - Add new style spawn support
Herbert Xu [Wed, 8 Jul 2009 07:55:52 +0000]
crypto: api - Add new style spawn support

This patch modifies the spawn infrastructure to support new style
algorithms like shash.  In particular, this means storing the
frontend type in the spawn and using crypto_create_tfm to allocate
the tfm.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agocrypto: shash - Add shash_instance
Herbert Xu [Tue, 7 Jul 2009 07:17:12 +0000]
crypto: shash - Add shash_instance

This patch adds shash_instance and the associated alloc/free
functions.  This is meant to be an instance that with a shash
algorithm under it.  Note that the instance itself doesn't have
to be shash.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agocrypto: api - Add crypto_alloc_instance2
Herbert Xu [Tue, 7 Jul 2009 06:07:37 +0000]
crypto: api - Add crypto_alloc_instance2

This patch adds a new argument to crypto_alloc_instance which
sets aside some space before the instance for use by algorithms
such as shash that place type-specific data before crypto_alg.

For compatibility the function has been renamed so that existing
users aren't affected.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agocrypto: api - Add new template create function
Herbert Xu [Tue, 7 Jul 2009 04:30:33 +0000]
crypto: api - Add new template create function

This patch introduces the template->create function intended
to replace the existing alloc function.  The intention is for
create to handle the registration directly, whereas currently
the caller of alloc has to handle the registration.

This allows type-specific code to be run prior to registration.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agocrypto: ansi_prng - alloc cipher just in init
Sebastian Andrzej Siewior [Fri, 3 Jul 2009 04:10:47 +0000]
crypto: ansi_prng - alloc cipher just in init

As reported by Eric Sesterhenn the re-allocation of the cipher in reset leads
to:
|BUG: sleeping function called from invalid context at kernel/rwsem.c:21
|in_atomic(): 1, irqs_disabled(): 0, pid: 4926, name: modprobe
|INFO: lockdep is turned off.
|Pid: 4926, comm: modprobe Tainted: G   M 2.6.31-rc1-22297-g5298976 #24
|Call Trace:
| [<c011dd93>] __might_sleep+0xf9/0x101
| [<c0777aa0>] down_read+0x16/0x68
| [<c048bf04>] crypto_alg_lookup+0x16/0x34
| [<c048bf52>] crypto_larval_lookup+0x30/0xf9
| [<c048c038>] crypto_alg_mod_lookup+0x1d/0x62
| [<c048c13e>] crypto_alloc_base+0x1e/0x64
| [<c04bf991>] reset_prng_context+0xab/0x13f
| [<c04e5cfc>] ? __spin_lock_init+0x27/0x51
| [<c04bfce1>] cprng_init+0x2a/0x42
| [<c048bb4c>] __crypto_alloc_tfm+0xfa/0x128
| [<c048c153>] crypto_alloc_base+0x33/0x64
| [<c04933c9>] alg_test_cprng+0x30/0x1f4
| [<c0493329>] alg_test+0x12f/0x19f
| [<c0177f1f>] ? __alloc_pages_nodemask+0x14d/0x481
| [<d09219e2>] do_test+0xf9d/0x163f [tcrypt]
| [<d0920de6>] do_test+0x3a1/0x163f [tcrypt]
| [<d0926035>] tcrypt_mod_init+0x35/0x7c [tcrypt]
| [<c010113c>] _stext+0x54/0x12c
| [<d0926000>] ? tcrypt_mod_init+0x0/0x7c [tcrypt]
| [<c01398a3>] ? up_read+0x16/0x2b
| [<c0139fc4>] ? __blocking_notifier_call_chain+0x40/0x4c
| [<c014ee8d>] sys_init_module+0xa9/0x1bf
| [<c010292b>] sysenter_do_call+0x12/0x32

because a spin lock is held and crypto_alloc_base() may sleep.
There is no reason to re-allocate the cipher, the state is resetted in
->setkey(). This patches makes the cipher allocation a one time thing and
moves it to init.

Reported-by: Eric Sesterhenn <eric.sesterhenn@lsexperts.de>
Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agocrypto: ansi_prng - Use just a BH lock
Sebastian Andrzej Siewior [Fri, 3 Jul 2009 04:09:41 +0000]
crypto: ansi_prng - Use just a BH lock

The current code uses a mix of sping_lock() & spin_lock_irqsave(). This can
lead to deadlock with the correct timming & cprng_get_random() + cprng_reset()
sequence.
I've converted them to bottom half locks since all three user grab just a BH
lock so this runs probably in softirq :)

Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agocrypto: testmgr - Allow implementation-specific tests
Herbert Xu [Thu, 2 Jul 2009 08:32:12 +0000]
crypto: testmgr - Allow implementation-specific tests

This patch adds the support for testing specific implementations.
This should only be used in very specific situations.  Right now
this means specific implementations of random number generators.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agocrypto: skcipher - Change default sync geniv on SMP to eseqiv
Herbert Xu [Thu, 25 Jun 2009 10:43:48 +0000]
crypto: skcipher - Change default sync geniv on SMP to eseqiv

As it stands we use chainiv for sync algorithms and eseqiv for
async algorithms.  However, when there is more than one CPU
chainiv forces all processing to be serialised which is usually
not what you want.  Also, the added overhead of eseqiv isn't that
great.

Therefore this patch changes the default sync geniv on SMP machines
to eseqiv.  For the odd situation where the overhead is unacceptable
then chainiv is still available as an option.

Note that on UP machines chainiv is still preferred over eseqiv
for sync algorithms.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agocrypto: skcipher - Fix request for sync algorithms
Herbert Xu [Thu, 25 Jun 2009 06:46:31 +0000]
crypto: skcipher - Fix request for sync algorithms

When a sync givcipher algorithm is requested, if an async version
of the same algorithm already exists, then we will loop forever
without ever constructing the sync version based on a blkcipher.

This is because we did not include the requested type/mask when
getting a larval for the geniv algorithm that is to be constructed.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agohwrng: Use PCI_VDEVICE
Joe Perches [Thu, 25 Jun 2009 05:50:53 +0000]
hwrng: Use PCI_VDEVICE

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agocrypto: testmgr - Remove hash size check
Herbert Xu [Wed, 24 Jun 2009 05:48:13 +0000]
crypto: testmgr - Remove hash size check

Until hash test vectors grow longer than 256 bytes, the only
purpose of the check is to generate a gcc warning.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agocrypto: aes-ni - Don't print message with KERN_ERR on old system
Roland Dreier [Wed, 24 Jun 2009 05:42:40 +0000]
crypto: aes-ni - Don't print message with KERN_ERR on old system

When the aes-intel module is loaded on a system that does not have the
AES instructions, it prints

    Intel AES-NI instructions are not detected.

at level KERN_ERR.  Since aes-intel is aliased to "aes" it will be tried
whenever anything uses AES and spam the console.  This doesn't match
existing practice for how to handle "no hardware" when initializing a
module, so downgrade the message to KERN_INFO.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agocrypto: fips - Select CPRNG
Neil Horman [Sun, 21 Jun 2009 13:38:03 +0000]
crypto: fips - Select CPRNG

The ANSI CPRNG has no dependence on FIPS support.  FIPS support however,
requires the use of the CPRNG.  Adjust that depedency relationship in Kconfig.

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agocrypto: tcrypt - Fix module return code when testing by name
Herbert Xu [Fri, 19 Jun 2009 12:37:00 +0000]
crypto: tcrypt - Fix module return code when testing by name

We should return 0/-ENOENT instead of 1/0 when testing by name.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agocrypto: ansi_cprng - Do not select FIPS
Herbert Xu [Fri, 19 Jun 2009 12:32:58 +0000]
crypto: ansi_cprng - Do not select FIPS

The RNG should work with FIPS disabled.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agocrypto: tcrypt - Test algorithms by name
Steffen Klassert [Fri, 19 Jun 2009 11:46:53 +0000]
crypto: tcrypt - Test algorithms by name

This adds the 'alg' module parameter to be able to test an
algorithm by name. If the algorithm type is not ad-hoc
clear for a algorithm (e.g. pcrypt, cryptd) it is possilbe
to set the algorithm type with the 'type' module parameter.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agocrypto: des_s390 - Permit weak keys unless REQ_WEAK_KEY set
Jarod Wilson [Thu, 18 Jun 2009 11:52:59 +0000]
crypto: des_s390 - Permit weak keys unless REQ_WEAK_KEY set

Just started running fips cavs test vectors through an s390x system
for giggles, and discovered that I missed patching s390's arch-specific
des3 implementation w/an earlier des3 patch to permit weak keys.

This change adds the same flag tweaks as
ad79cdd77fc1466e45cf923890f66bcfe7c43f12 (crypto: des3_ede - permit
weak keys unless REQ_WEAK_KEY set) for s390's des3 implementation,
yields expected test results now.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agorandom: Add optional continuous repetition test to entropy store based rngs
Neil Horman [Thu, 18 Jun 2009 11:50:21 +0000]
random: Add optional continuous repetition test to entropy store based rngs

FIPS-140 requires that all random number generators implement continuous self
tests in which each extracted block of data is compared against the last block
for repetition.  The ansi_cprng implements such a test, but it would be nice if
the hw rng's did the same thing.  Obviously its not something thats always
needed, but it seems like it would be a nice feature to have on occasion. I've
written the below patch which allows individual entropy stores to be flagged as
desiring a continuous test to be run on them as is extracted.  By default this
option is off, but is enabled in the event that fips mode is selected during
bootup.

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agocrypto: aes-ni - Remove CRYPTO_TFM_REQ_MAY_SLEEP from fpu template
Huang Ying [Thu, 18 Jun 2009 11:44:01 +0000]
crypto: aes-ni - Remove CRYPTO_TFM_REQ_MAY_SLEEP from fpu template

kernel_fpu_begin/end used preempt_disable/enable, so sleep should be
prevented between kernel_fpu_begin/end.

Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agocrypto: aes-ni - Do not sleep when using the FPU
Huang Ying [Thu, 18 Jun 2009 11:41:27 +0000]
crypto: aes-ni - Do not sleep when using the FPU

Because AES-NI instructions will touch XMM state, corresponding code
must be enclosed within kernel_fpu_begin/end, which used
preempt_disable/enable. So sleep should be prevented between
kernel_fpu_begin/end.

Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agocrypto: aes-ni - Fix cbc mode IV saving
Huang Ying [Thu, 18 Jun 2009 11:33:57 +0000]
crypto: aes-ni - Fix cbc mode IV saving

Original implementation of aesni_cbc_dec do not save IV if input
length % 4 == 0. This will make decryption of next block failed.

Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agocrypto: padlock-aes - work around Nano CPU errata in CBC mode
Chuck Ebbert [Thu, 18 Jun 2009 11:31:09 +0000]
crypto: padlock-aes - work around Nano CPU errata in CBC mode

Extend previous workarounds for the prefetch bug to cover CBC mode,
clean up the code a bit.

Signed-off-by: Chuck Ebbert <cebbert@redhat.com>
Acked-by: Harald Welte <HaraldWelte@viatech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agocrypto: padlock-aes - work around Nano CPU errata in ECB mode
Chuck Ebbert [Thu, 18 Jun 2009 11:24:10 +0000]
crypto: padlock-aes - work around Nano CPU errata in ECB mode

The VIA Nano processor has a bug that makes it prefetch extra data
during encryption operations, causing spurious page faults. Extend
existing workarounds for ECB mode to copy the data to an temporary
buffer to avoid the problem.

Signed-off-by: Chuck Ebbert <cebbert@redhat.com>
Acked-by: Harald Welte <HaraldWelte@viatech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agoia64: Fix resource assignment for root busses
Matthew Wilcox [Wed, 17 Jun 2009 20:33:36 +0000]
ia64: Fix resource assignment for root busses

ia64 was assigning resources to root busses after allocations had
been made for child busses.  Calling pcibios_setup_root_windows() from
pcibios_fixup_bus() solves this problem by assigning the resources to
the root bus before child busses are scanned.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Tested-by: Andrew Patterson <andrew.patterson@hp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agox86: Use pci_claim_resource
Matthew Wilcox [Wed, 17 Jun 2009 20:33:35 +0000]
x86: Use pci_claim_resource

Instead of open-coding pci_find_parent_resource and request_resource,
just call pci_claim_resource.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoDelete pcibios_select_root
Matthew Wilcox [Wed, 17 Jun 2009 20:33:34 +0000]
Delete pcibios_select_root

This function was only used by pci_claim_resource(), and the last commit
deleted that use.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoFix pci_claim_resource
Matthew Wilcox [Wed, 17 Jun 2009 20:33:33 +0000]
Fix pci_claim_resource

Instead of starting from the iomem or ioport roots, start from the
parent bus' resources.  This fixes a bug where child resources would
appear above their parents resources if they had the same size.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Tested-by: Andrew Patterson <andrew.patterson@hp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoMerge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
Linus Torvalds [Wed, 17 Jun 2009 18:53:48 +0000]
Merge branch 'release' of git://git./linux/kernel/git/aegl/linux-2.6

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] Convert ia64 to use int-ll64.h
  [IA64] Fix build error in paravirt_patchlist.c
  [IA64] ia64 does not need umount2() syscall
  [IA64] hook up new rt_tgsigqueueinfo syscall
  [IA64] msi_ia64.c dmar_msi_type should be static
  [IA64] remove obsolete hw_interrupt_type
  [IA64] remove obsolete irq_desc_t typedef
  [IA64] remove obsolete no_irq_type
  [IA64] unexport fpswa.h

10 years agoMerge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6
Linus Torvalds [Wed, 17 Jun 2009 18:41:49 +0000]
Merge branch 'for-next' of git://git./linux/kernel/git/sameo/mfd-2.6

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6:
  mfd: early init for MFD running regulators
  mfd: fix tmio related warnings
  mfd: asic3: enable SD/SDIO cell
  mfd: asic3: enable DS1WM cell
  mfd: asic3: remove SD/SDIO controller register definitions
  mfd: asic3: use resource_size macro instead of local variable
  mfd: add ASIC3 IRQ numbers
  mfd: asic3: add clock handling for MFD cells
  mfd: asic3: add asic3_set_register common operation
  mfd: Fix Kconfig help text for WM8350
  mfd: add PCAP driver
  mfd: add U300 AB3100 core support
  drivers/mfd: remove obsolete irq_desc_t typedef
  mfd/pcf50633-gpio.c: add MODULE_LICENSE
  mfd: Mark WM8350 mask revision as readable to match silicon
  mfd: Mark clocks_init as non-init in twl4030-core.c
  mfd: Correct readability of WM8350 register 227

10 years agoMerge branch 'kmemleak' of git://linux-arm.org/linux-2.6
Linus Torvalds [Wed, 17 Jun 2009 17:42:21 +0000]
Merge branch 'kmemleak' of git://linux-arm.org/linux-2.6

* 'kmemleak' of git://linux-arm.org/linux-2.6:
  kmemleak: Fix some typos in comments
  kmemleak: Rename kmemleak_panic to kmemleak_stop
  kmemleak: Only use GFP_KERNEL|GFP_ATOMIC for the internal allocations

10 years agomfd: early init for MFD running regulators
Samuel Ortiz [Mon, 15 Jun 2009 16:04:54 +0000]
mfd: early init for MFD running regulators

For MFDs running regulator cores, we really want them to be brought up early
during boot.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Mike Rapoport <mike@compulab.co.il>

10 years agomfd: fix tmio related warnings
Samuel Ortiz [Mon, 15 Jun 2009 13:43:31 +0000]
mfd: fix tmio related warnings

We can not have .driver_data as const since platform_set_drvdata() doesnt take
a const.
The hclk mmc_data field can be const though.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

10 years agomfd: asic3: enable SD/SDIO cell
Philipp Zabel [Mon, 15 Jun 2009 10:10:25 +0000]
mfd: asic3: enable SD/SDIO cell

This enables the ASIC3's SD/SDIO MFD cell, supported by the tmio_mmc driver.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

10 years agomfd: asic3: enable DS1WM cell
Philipp Zabel [Mon, 15 Jun 2009 10:10:24 +0000]
mfd: asic3: enable DS1WM cell

This enables the ASIC3's DS1WM MFD cell, supported by the ds1wm driver.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

10 years agomfd: asic3: remove SD/SDIO controller register definitions
Philipp Zabel [Fri, 5 Jun 2009 16:31:05 +0000]
mfd: asic3: remove SD/SDIO controller register definitions

Only the base addresses remain, as they are needed to set up
the IOMEM resources.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

10 years agomfd: asic3: use resource_size macro instead of local variable
Philipp Zabel [Fri, 5 Jun 2009 16:31:04 +0000]
mfd: asic3: use resource_size macro instead of local variable

This should make the code a little bit easier to read.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

10 years agomfd: add ASIC3 IRQ numbers
Philipp Zabel [Fri, 5 Jun 2009 16:31:03 +0000]
mfd: add ASIC3 IRQ numbers

IRQ number definitions for PWM, LED, SPI and OWM (ds1wm).

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

10 years agomfd: asic3: add clock handling for MFD cells
Philipp Zabel [Fri, 5 Jun 2009 16:31:02 +0000]
mfd: asic3: add clock handling for MFD cells

Since ASIC3 has to work on both PXA and S3C and since their
struct clk implementations differ, we can't register out
clocks with the clkdev mechanism (yet?).
For now we have to keep clock handling internal to this
driver and enable/disable the clocks via the
mfd_cell->enable/disable functions.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

10 years agomfd: asic3: add asic3_set_register common operation
Philipp Zabel [Fri, 5 Jun 2009 16:31:01 +0000]
mfd: asic3: add asic3_set_register common operation

Used to configure single bits of the SDHWCTRL_SDCONF and EXTCF_RESET/SELECT
registers needed for DS1WM, MMC/SDIO and PCMCIA functionality.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

10 years agomfd: Fix Kconfig help text for WM8350
Mark Brown [Fri, 29 May 2009 10:34:18 +0000]
mfd: Fix Kconfig help text for WM8350

More with the grammar.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

10 years agomfd: add PCAP driver
Daniel Ribeiro [Thu, 28 May 2009 18:43:37 +0000]
mfd: add PCAP driver

The PCAP Asic as present on EZX phones is a multi function device with
voltage regulators, ADC, touch screen controller, RTC, USB transceiver,
leds controller, and audio codec.

It has two SPI ports, typically one is connected to the application
processor and another to the baseband, this driver provides read/write
functions to its registers, irq demultiplexer and ADC
queueing/abstraction.

This chip is used on a lot of Motorola phones, it was manufactured by TI
as a custom product with the name PTWL93017, later this design evolved
into the ATLAS PMIC from Freescale (MC13783).

Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

10 years agomfd: add U300 AB3100 core support
Linus Walleij [Thu, 21 May 2009 21:17:06 +0000]
mfd: add U300 AB3100 core support

This adds a core driver for the AB3100 mixed-signal circuit
found in the ST-Ericsson U300 series platforms. This driver
is a singleton proxy for all accesses to the AB3100
sub-drivers which will be merged on top of this one, RTC,
regulators, battery and system power control, vibrator,
LEDs, and an ALSA codec.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Reviewed-by: Mike Rapoport <mike@compulab.co.il>
Reviewed-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

10 years agodrivers/mfd: remove obsolete irq_desc_t typedef
Thomas Gleixner [Tue, 12 May 2009 20:45:15 +0000]
drivers/mfd: remove obsolete irq_desc_t typedef

The defines and typedefs (hw_interrupt_type, no_irq_type, irq_desc_t) have
been kept around for migration reasons.  After more than two years it's
time to remove them finally.

This patch cleans up one of the remaining users.  When all such patches
hit mainline we can remove the defines and typedefs finally.

Impact: cleanup

Convert the last remaining users and remove the typedef.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

10 years agomfd/pcf50633-gpio.c: add MODULE_LICENSE
Adrian Bunk [Tue, 12 May 2009 20:45:14 +0000]
mfd/pcf50633-gpio.c: add MODULE_LICENSE

Add the missing MODULE_LICENSE("GPL").

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: Balaji Rao <balajirrao@openmoko.org>
Cc: Andy Green <andy@openmoko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

10 years agomfd: Mark WM8350 mask revision as readable to match silicon
Mark Brown [Wed, 22 Apr 2009 20:46:51 +0000]
mfd: Mark WM8350 mask revision as readable to match silicon

No impact unless someone has written additional kernel code.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

10 years agomfd: Mark clocks_init as non-init in twl4030-core.c
Rakib Mullick [Sun, 19 Apr 2009 02:56:49 +0000]
mfd: Mark clocks_init as non-init in twl4030-core.c

Impact: Fix section mismatch.

clocks_init() has been called from twl4030_probe() which is a non-init
function. Since probing can be done anytime so clocks_init will be
called anytime too. So we mark clock_init() as non-init.

LD      drivers/mfd/built-in.o
WARNING: drivers/mfd/built-in.o(.text+0x8dd9): Section mismatch in
reference from the function twl4030_probe() to the function
.init.text:clocks_init()
The function twl4030_probe() references
the function __init clocks_init().
This is often because twl4030_probe lacks a __init
annotation or the annotation of clocks_init is wrong.

Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

10 years agomfd: Correct readability of WM8350 register 227
Mark Brown [Mon, 13 Apr 2009 13:05:02 +0000]
mfd: Correct readability of WM8350 register 227

This includes the USB current limit status override which is used in the
power management driver.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

10 years agokmemleak: Fix some typos in comments
Catalin Marinas [Wed, 17 Jun 2009 17:29:04 +0000]
kmemleak: Fix some typos in comments

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

10 years agokmemleak: Rename kmemleak_panic to kmemleak_stop
Catalin Marinas [Wed, 17 Jun 2009 17:29:03 +0000]
kmemleak: Rename kmemleak_panic to kmemleak_stop

This is to avoid the confusion created by the "panic" word.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>

10 years agokmemleak: Only use GFP_KERNEL|GFP_ATOMIC for the internal allocations
Catalin Marinas [Wed, 17 Jun 2009 17:29:02 +0000]
kmemleak: Only use GFP_KERNEL|GFP_ATOMIC for the internal allocations

Kmemleak allocates memory for pointer tracking and it tries to avoid
using GFP_ATOMIC if the caller doesn't require it. However other gfp
flags may be passed by the caller which aren't required by kmemleak.
This patch filters the gfp flags so that only GFP_KERNEL | GFP_ATOMIC
are used.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>

10 years agoMerge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq
Linus Torvalds [Wed, 17 Jun 2009 16:51:50 +0000]
Merge branch 'fixes' of git://git./linux/kernel/git/davej/cpufreq

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ] cpumask: new cpumask operators for arch/x86/kernel/cpu/cpufreq/powernow-k8.c
  [CPUFREQ] cpumask: avoid playing with cpus_allowed in powernow-k8.c
  [CPUFREQ] cpumask: avoid cpumask games in arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c
  [CPUFREQ] cpumask: avoid playing with cpus_allowed in speedstep-ich.c
  [CPUFREQ] powernow-k8: get drv data for correct CPU
  [CPUFREQ] powernow-k8: read P-state from HW
  [CPUFREQ] reduce scope of ACPI_PSS_BIOS_BUG_MSG[]
  [CPUFREQ] Clean up convoluted code in arch/x86/kernel/tsc.c:time_cpufreq_notifier()
  [CPUFREQ] minor correction to cpu-freq documentation
  [CPUFREQ] powernow-k8.c: mess cleanup
  [CPUFREQ] Only set sampling_rate_max deprecated, sampling_rate_min is useful
  [CPUFREQ] powernow-k8: Set transition latency to 1 if ACPI tables export 0
  [CPUFREQ] ondemand: Uncouple minimal sampling rate from HZ in NO_HZ case

10 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
Linus Torvalds [Wed, 17 Jun 2009 16:50:44 +0000]
Merge git://git./linux/kernel/git/jejb/scsi-misc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6:
  [SCSI] aic79xx: make driver respect nvram for IU and QAS settings
  [SCSI] don't attach ULD to Dell Universal Xport
  [SCSI] lpfc 8.3.3 : Update driver version to 8.3.3
  [SCSI] lpfc 8.3.3 : Add support for Target Reset handler entrypoint
  [SCSI] lpfc 8.3.3 : Fix a couple of spin_lock and memory issues and a crash
  [SCSI] lpfc 8.3.3 : FC/FCOE discovery fixes
  [SCSI] lpfc 8.3.3 : Fix various SLI-3 vs SLI-4 differences
  [SCSI] qla2xxx: Resolve a performance issue in interrupt
  [SCSI] cnic, bnx2i: Fix build failure when CONFIG_PCI is not set.
  [SCSI] nsp_cs: time_out reaches -1
  [SCSI] qla2xxx: fix printk format warnings
  [SCSI] ncr53c8xx: div reaches -1
  [SCSI] compat: don't perform unneeded copy in sg_io code
  [SCSI] zfcp: Update FC pass-through support
  [SCSI] zfcp: Add FC pass-through support
  [SCSI] FC Pass Thru support

10 years agoMerge branch 'linux-next' of git://git.infradead.org/ubi-2.6
Linus Torvalds [Wed, 17 Jun 2009 16:48:30 +0000]
Merge branch 'linux-next' of git://git.infradead.org/ubi-2.6

* 'linux-next' of git://git.infradead.org/ubi-2.6: (21 commits)
  UBI: add reboot notifier
  UBI: handle more error codes
  UBI: fix multiple spelling typos
  UBI: fix kmem_cache_free on error patch
  UBI: print amount of reserved PEBs
  UBI: improve messages in the WL worker
  UBI: make gluebi a separate module
  UBI: remove built-in gluebi
  UBI: add notification API
  UBI: do not switch to R/O mode on read errors
  UBI: fix and clean-up error paths in WL worker
  UBI: introduce new constants
  UBI: fix race condition
  UBI: minor serialization fix
  UBI: do not panic if volume check fails
  UBI: add dump_stack in checking code
  UBI: fix races in I/O debugging checks
  UBI: small debugging code optimization
  UBI: improve debugging messages
  UBI: re-name volumes_mutex to device_mutex
  ...

10 years agoMerge branch 'linux-next' of git://git.infradead.org/ubifs-2.6
Linus Torvalds [Wed, 17 Jun 2009 16:46:33 +0000]
Merge branch 'linux-next' of git://git.infradead.org/ubifs-2.6

* 'linux-next' of git://git.infradead.org/ubifs-2.6:
  UBIFS: start using hrtimers
  hrtimer: export ktime_add_safe
  UBIFS: do not forget to register BDI device
  UBIFS: allow sync option in rootflags
  UBIFS: remove dead code
  UBIFS: use anonymous device
  UBIFS: return proper error code if the compr is not present
  UBIFS: return error if link and unlink race
  UBIFS: reset no_space flag after inode deletion

10 years agoDocumentation/vm/Makefile: don't try to build slqbinfo
Andrew Morton [Wed, 17 Jun 2009 05:38:29 +0000]
Documentation/vm/Makefile: don't try to build slqbinfo

For it is only in linux-next at this stage.

Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agodrm/radeon/kms: remove the _DRM_DRIVER from the KMS paths.
Dave Airlie [Wed, 17 Jun 2009 07:21:13 +0000]
drm/radeon/kms: remove the _DRM_DRIVER from the KMS paths.

This causes an issue since we fixed the drm mappings to do the right thing,
so its just a copy and pasto.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg...
Linus Torvalds [Wed, 17 Jun 2009 16:41:25 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/penberg/slab-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6:
  SLUB: Fix early boot GFP_DMA allocations
  SLUB: Don't print out OOM warning for __GFP_NOFAIL
  SLUB: fix build when !SLUB_DEBUG
  SLUB: Out-of-memory diagnostics
  slab: document kzfree() zeroing behavior
  slab: fix generic PAGE_POISONING conflict with SLAB_RED_ZONE
  slob: use PG_slab for identifying SLOB pages

10 years agoPull for-2.6.31 into release
Tony Luck [Wed, 17 Jun 2009 16:35:24 +0000]
Pull for-2.6.31 into release

10 years ago[IA64] Convert ia64 to use int-ll64.h
Matthew Wilcox [Fri, 22 May 2009 20:49:49 +0000]
[IA64] Convert ia64 to use int-ll64.h

It is generally agreed that it would be beneficial for u64 to be an
unsigned long long on all architectures.  ia64 (in common with several
other 64-bit architectures) currently uses unsigned long.  Migrating
piecemeal is too painful; this giant patch fixes all compilation warnings
and errors that come as a result of switching to use int-ll64.h.

Note that userspace will still see __u64 defined as unsigned long.  This
is important as it affects C++ name mangling.

[Updated by Tony Luck to change efi.h:efi_freemem_callback_t to use
 u64 for start/end rather than unsigned long]

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

10 years agoMerge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
Linus Torvalds [Wed, 17 Jun 2009 16:13:52 +0000]
Merge branch 'upstream' of git://ftp.linux-mips.org/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (47 commits)
  MIPS: Add hibernation support
  MIPS: Move Cavium CP0 hwrena impl bits to cpu-feature-overrides.h
  MIPS: Allow CPU specific overriding of CP0 hwrena impl bits.
  MIPS: Kconfig Add SYS_SUPPORTS_HUGETLBFS and enable it for some systems.
  Hugetlbfs: Enable hugetlbfs for more systems in Kconfig.
  MIPS: TLB support for hugetlbfs.
  MIPS: Add hugetlbfs page defines.
  MIPS: Add support files for hugetlbfs.
  MIPS: Remove unused parameters from iPTE_LW.
  Staging: Add octeon-ethernet driver files.
  MIPS: Export erratum function needed by octeon-ethernet driver.
  MIPS: Cavium-Octeon: Add more chip specific feature tests.
  MIPS: Cavium-Octeon: Add more board type constants.
  MIPS: Export cvmx_sysinfo_get needed by octeon-ethernet driver.
  MIPS: Add named alloc functions to OCTEON boot monitor memory allocator.
  MIPS: Alchemy: devboards: Convert to gpio calls.
  MIPS: Alchemy: xxs1500: use linux gpio api.
  MIPS: Alchemy: MTX-1: Use linux gpio api.
  MIPS: Alchemy: Rewrite GPIO support.
  MIPS: Alchemy: Remove unused au1000_gpio.h header
  ...

10 years ago[IA64] Fix build error in paravirt_patchlist.c
Jes Sorensen [Wed, 17 Jun 2009 16:04:40 +0000]
[IA64] Fix build error in paravirt_patchlist.c

Andrew cleaned up some #include tangles in:
commit 0d9c25dde878a636ee9a9b53923569171bf9a55b
  headers: move module_bug_finalize()/module_bug_cleanup() definitions into module.h

which resulted in this build error for ia64:
CC arch/ia64/kernel/paravirt_patchlist.o
arch/ia64/kernel/paravirt_patchlist.c:43: error: expected '=', ',', ';', 'asm' or '__attribute__' before '__initdata'
arch/ia64/kernel/paravirt_patchlist.c:54: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'paravirt_get_gate_patchlist'
arch/ia64/kernel/paravirt_patchlist.c:76: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'paravirt_get_gate_section'
make[1]: *** [arch/ia64/kernel/paravirt_patchlist.o] Error 1

The problem was that paravirt_patchlist.c was relying on some of the
nested includes (specifically that linux/bug.h included linux/module.h

Signed-off-by: Jes Sorensen <jes@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

10 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
Linus Torvalds [Wed, 17 Jun 2009 15:46:57 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  get rid of BKL in fs/sysv
  get rid of BKL in fs/minix
  get rid of BKL in fs/efs
  befs ->pust_super() doesn't need BKL
  Cleanup of adfs headers
  9P doesn't need BKL in ->umount_begin()
  fuse doesn't need BKL in ->umount_begin()
  No instance of ->bmap() needs BKL
  remove unlock_kernel() left accidentally
  ext4: avoid unnecessary spinlock in critical POSIX ACL path
  ext3: avoid unnecessary spinlock in critical POSIX ACL path

10 years agoMIPS: Add hibernation support
Wu Zhangjin [Thu, 4 Jun 2009 12:27:10 +0000]
MIPS: Add hibernation support

[Ralf: SMP support requires CPU hotplugging which MIPS currently doesn't
support.  As implemented in this patch cache and tlb flushing will also be
invoked with interrupts disabled so smp_call_function() will blow up in
charming ways.  So limit to !SMP.]

Reviewed-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Yan Hua <yanh@lemote.com>
Reviewed-by: Arnaud Patard <apatard@mandriva.com>
Reviewed-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Wu Zhangjin <wuzj@lemote.com>
Signed-off-by: Hu Hongbing <huhb@lemote.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

10 years agoMIPS: Move Cavium CP0 hwrena impl bits to cpu-feature-overrides.h
David Daney [Wed, 13 May 2009 22:59:56 +0000]
MIPS: Move Cavium CP0 hwrena impl bits to cpu-feature-overrides.h

We had an ugly #ifdef for Cavium Octeon hwrena bits in traps.c, remove
it to mach-cavium-octeon/cpu-feature-overrides.h

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

10 years agoMIPS: Allow CPU specific overriding of CP0 hwrena impl bits.
David Daney [Wed, 13 May 2009 22:59:55 +0000]
MIPS: Allow CPU specific overriding of CP0 hwrena impl bits.

Some CPUs have implementation dependent rdhwr registers.  Allow them
to be enabled on a per CPU basis.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

10 years agoMIPS: Kconfig Add SYS_SUPPORTS_HUGETLBFS and enable it for some systems.
David Daney [Thu, 28 May 2009 00:47:46 +0000]
MIPS: Kconfig Add SYS_SUPPORTS_HUGETLBFS and enable it for some systems.

Add new kconfig variables SYS_SUPPORTS_HUGETLBFS and
CPU_SUPPORTS_HUGEPAGES.  They are enabled for systems that are known
to support huge pages.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

10 years agoHugetlbfs: Enable hugetlbfs for more systems in Kconfig.
David Daney [Thu, 28 May 2009 00:47:45 +0000]
Hugetlbfs: Enable hugetlbfs for more systems in Kconfig.

As part of adding hugetlbfs support for MIPS, I am adding a new
kconfig variable 'SYS_SUPPORTS_HUGETLBFS'.  Since some mips cpu
varients don't yet support it, we can enable selection of HUGETLBFS on
a system by system basis from the arch/mips/Kconfig.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
CC: William Irwin <wli@holomorphy.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

10 years agoMIPS: TLB support for hugetlbfs.
David Daney [Thu, 28 May 2009 00:47:44 +0000]
MIPS: TLB support for hugetlbfs.

The TLB handlers need to check for huge pages and give them special
handling.  Huge pages consist of two contiguous sub-pages of physical
memory.

* Loading entrylo0 and entrylo1 need to be handled specially.

* The page mask must be set for huge pages and then restored after
  writing the TLB entries.

* The PTE for huge pages resides in the PMD, we halt traversal of the
  tables there.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

10 years agoMIPS: Add hugetlbfs page defines.
David Daney [Thu, 28 May 2009 00:47:43 +0000]
MIPS: Add hugetlbfs page defines.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

10 years agoMIPS: Add support files for hugetlbfs.
David Daney [Thu, 28 May 2009 00:47:42 +0000]
MIPS: Add support files for hugetlbfs.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

10 years agoMIPS: Remove unused parameters from iPTE_LW.
David Daney [Fri, 8 May 2009 22:10:50 +0000]
MIPS: Remove unused parameters from iPTE_LW.

The l parameter to iPTE_LW() is unused. Remove it and from some of its
callers as well.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

10 years agoStaging: Add octeon-ethernet driver files.
David Daney [Wed, 6 May 2009 00:35:21 +0000]
Staging: Add octeon-ethernet driver files.

The octeon-ethernet driver supports the sgmii, rgmii, spi, and xaui
ports present on the Cavium OCTEON family of SOCs.  These SOCs are
multi-core mips64 processors with existing support over in arch/mips.

The driver files can be categorized into three basic groups:

1) Register definitions, these are named cvmx-*-defs.h

2) Main driver code, these have names that don't start cvmx-.

3) Interface specific functions and other utility code, names starting
with cvmx-

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

10 years agoMIPS: Export erratum function needed by octeon-ethernet driver.
David Daney [Wed, 6 May 2009 00:35:20 +0000]
MIPS: Export erratum function needed by octeon-ethernet driver.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

10 years agoMIPS: Cavium-Octeon: Add more chip specific feature tests.
David Daney [Wed, 6 May 2009 00:35:19 +0000]
MIPS: Cavium-Octeon: Add more chip specific feature tests.

The octeon-ethernet driver needs to check for additional chip specific
features, we add them to the octeon_has_feature() framework.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

10 years agoMIPS: Cavium-Octeon: Add more board type constants.
David Daney [Wed, 6 May 2009 00:35:18 +0000]
MIPS: Cavium-Octeon: Add more board type constants.

The bootloader now uses additional board type constants.  The
octeon-ethernet driver needs some of the new values.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

10 years agoMIPS: Export cvmx_sysinfo_get needed by octeon-ethernet driver.
David Daney [Wed, 6 May 2009 00:35:17 +0000]
MIPS: Export cvmx_sysinfo_get needed by octeon-ethernet driver.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>