6 years agoBtrfs: fix space leak when we fail to reserve metadata space
Josef Bacik [Mon, 25 Mar 2013 20:03:35 +0000]
Btrfs: fix space leak when we fail to reserve metadata space

commit f4881bc7a83eff263789dd524b7c269d138d4af5 upstream.

Dave reported a warning when running xfstest 275.  We have been leaking delalloc
metadata space when our reservations fail.  This is because we were improperly
calculating how much space to free for our checksum reservations.  The problem
is we would sometimes free up space that had already been freed in another
thread and we would end up with negative usage for the delalloc space.  This
patch fixes the problem by calculating how much space the other threads would
have already freed, and then calculate how much space we need to free had we not
done the reservation at all, and then freeing any excess space.  This makes
xfstests 275 no longer have leaked space.  Thanks

Reported-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Lingzhu Xiang <lxiang@redhat.com>
Reviewed-by: CAI Qian <caiqian@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agodrm/i915: Don't clobber crtc->fb when queue_flip fails
Ville Syrjälä [Fri, 22 Feb 2013 14:53:38 +0000]
drm/i915: Don't clobber crtc->fb when queue_flip fails

commit 4a35f83b2b7c6aae3fc0d1c4554fdc99dc33ad07 upstream.

Restore crtc->fb to the old framebuffer if queue_flip fails.

While at it, kill the pointless intel_fb temp variable.

v2: Update crtc->fb before queue_flip and restore it back
    after a failure.

Backported for 3.4-stable. Adjusted context only.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reported-and-Tested-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Lingzhu Xiang <lxiang@redhat.com>
Reviewed-by: CAI Qian <caiqian@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agonfsd4: reject "negative" acl lengths
J. Bruce Fields [Tue, 26 Mar 2013 18:11:13 +0000]
nfsd4: reject "negative" acl lengths

commit 64a817cfbded8674f345d1117b117f942a351a69 upstream.

Since we only enforce an upper bound, not a lower bound, a "negative"
length can get through here.

The symptom seen was a warning when we attempt to a kmalloc with an
excessive size.

Reported-by: Toralf Förster <toralf.foerster@gmx.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoARM: cns3xxx: fix mapping of private memory region
Mac Lin [Mon, 25 Mar 2013 09:23:33 +0000]
ARM: cns3xxx: fix mapping of private memory region

commit a3d9052c6296ad3398d3ad649c3c682c3e7ecfa6 upstream.

Since commit 0536bdf33faf (ARM: move iotable mappings within the vmalloc
region), the Cavium CNS3xxx cannot boot anymore.

This is caused by the pre-defined iotable mappings is not in the vmalloc
region. This patch move the iotable mappings into the vmalloc region, and
merge the MPCore private memory region (containing the SCU, the GIC and
the TWD) as a single region.

Signed-off-by: Mac Lin <mkl0301@gmail.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoloop: prevent bdev freeing while device in use
Anatol Pomozov [Mon, 1 Apr 2013 16:47:56 +0000]
loop: prevent bdev freeing while device in use

commit c1681bf8a7b1b98edee8b862a42c19c4e53205fd upstream.

struct block_device lifecycle is defined by its inode (see fs/block_dev.c) -
block_device allocated first time we access /dev/loopXX and deallocated on
bdev_destroy_inode. When we create the device "losetup /dev/loopXX afile"
we want that block_device stay alive until we destroy the loop device
with "losetup -d".

But because we do not hold /dev/loopXX inode its counter goes 0, and
inode/bdev can be destroyed at any moment. Usually it happens at memory
pressure or when user drops inode cache (like in the test below). When later in
loop_clr_fd() we want to use bdev we have use-after-free error with following
stack:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000280
  bd_set_size+0x10/0xa0
  loop_clr_fd+0x1f8/0x420 [loop]
  lo_ioctl+0x200/0x7e0 [loop]
  lo_compat_ioctl+0x47/0xe0 [loop]
  compat_blkdev_ioctl+0x341/0x1290
  do_filp_open+0x42/0xa0
  compat_sys_ioctl+0xc1/0xf20
  do_sys_open+0x16e/0x1d0
  sysenter_dispatch+0x7/0x1a

To prevent use-after-free we need to grab the device in loop_set_fd()
and put it later in loop_clr_fd().

The issue is reprodusible on current Linus head and v3.3. Here is the test:

  dd if=/dev/zero of=loop.file bs=1M count=1
  while [ true ]; do
    losetup /dev/loop0 loop.file
    echo 2 > /proc/sys/vm/drop_caches
    losetup -d /dev/loop0
  done

[ Doing bdgrab/bput in loop_set_fd/loop_clr_fd is safe, because every
  time we call loop_set_fd() we check that loop_device->lo_state is
  Lo_unbound and set it to Lo_bound If somebody will try to set_fd again
  it will get EBUSY.  And if we try to loop_clr_fd() on unbound loop
  device we'll get ENXIO.

  loop_set_fd/loop_clr_fd (and any other loop ioctl) is called under
  loop_device->lo_ctl_mutex. ]

Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agousb: gadget: udc-core: fix a regression during gadget driver unbinding
Alan Stern [Fri, 15 Mar 2013 18:02:14 +0000]
usb: gadget: udc-core: fix a regression during gadget driver unbinding

commit 511f3c5326eabe1ece35202a404c24c0aeacc246 upstream.

This patch (as1666) fixes a regression in the UDC core.  The core
takes care of unbinding gadget drivers, and it does the unbinding
before telling the UDC driver to turn off the controller hardware.
When the call to the udc_stop callback is made, the gadget no longer
has a driver.  The callback routine should not be invoked with a
pointer to the old driver; doing so can cause problems (such as
use-after-free accesses in net2280).

This patch should be applied, with appropriate context changes, to all
the stable kernels going back to 3.1.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoBtrfs: don't drop path when printing out tree errors in scrub
Josef Bacik [Fri, 29 Mar 2013 14:09:34 +0000]
Btrfs: don't drop path when printing out tree errors in scrub

commit d8fe29e9dea8d7d61fd140d8779326856478fc62 upstream.

A user reported a panic where we were panicing somewhere in
tree_backref_for_extent from scrub_print_warning.  He only captured the trace
but looking at scrub_print_warning we drop the path right before we mess with
the extent buffer to print out a bunch of stuff, which isn't right.  So fix this
by dropping the path after we use the eb if we need to.  Thanks,

Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoBtrfs: limit the global reserve to 512mb
Josef Bacik [Tue, 26 Mar 2013 19:31:45 +0000]
Btrfs: limit the global reserve to 512mb

commit fdf30d1c1b386e1b73116cc7e0fb14e962b763b0 upstream.

A user reported a problem where he was getting early ENOSPC with hundreds of
gigs of free data space and 6 gigs of free metadata space.  This is because the
global block reserve was taking up the entire free metadata space.  This is
ridiculous, we have infrastructure in place to throttle if we start using too
much of the global reserve, so instead of letting it get this huge just limit it
to 512mb so that users can still get work done.  This allowed the user to
complete his rsync without issues.  Thanks

Reported-and-tested-by: Stefan Priebe <s.priebe@profihost.ag>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoBtrfs: fix race between mmap writes and compression
Chris Mason [Tue, 26 Mar 2013 17:07:00 +0000]
Btrfs: fix race between mmap writes and compression

commit 4adaa611020fa6ac65b0ac8db78276af4ec04e63 upstream.

Btrfs uses page_mkwrite to ensure stable pages during
crc calculations and mmap workloads.  We call clear_page_dirty_for_io
before we do any crcs, and this forces any application with the file
mapped to wait for the crc to finish before it is allowed to change
the file.

With compression on, the clear_page_dirty_for_io step is happening after
we've compressed the pages.  This means the applications might be
changing the pages while we are compressing them, and some of those
modifications might not hit the disk.

This commit adds the clear_page_dirty_for_io before compression starts
and makes sure to redirty the page if we have to fallback to
uncompressed IO as well.

Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Reported-by: Alexandre Oliva <oliva@gnu.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agousb: xhci: Fix TRB transfer length macro used for Event TRB.
Vivek Gautam [Thu, 21 Mar 2013 06:36:48 +0000]
usb: xhci: Fix TRB transfer length macro used for Event TRB.

commit 1c11a172cb30492f5f6a82c6e118fdcd9946c34f upstream.

Use proper macro while extracting TRB transfer length from
Transfer event TRBs. Adding a macro EVENT_TRB_LEN (bits 0:23)
for the same, and use it instead of TRB_LEN (bits 0:16) in
case of event TRBs.

This patch should be backported to kernels as old as 2.6.31, that
contain the commit b10de142119a676552df3f0d2e3a9d647036c26a "USB: xhci:
Bulk transfer support".  This patch will have issues applying to older
kernels.

Signed-off-by: Vivek gautam <gautam.vivek@samsung.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agonet/irda: add missing error path release_sock call
Kees Cook [Wed, 20 Mar 2013 05:19:24 +0000]
net/irda: add missing error path release_sock call

commit 896ee0eee6261e30c3623be931c3f621428947df upstream.

This makes sure that release_sock is called for all error conditions in
irda_getsockopt.

Signed-off-by: Kees Cook <keescook@chromium.org>
Reported-by: Brad Spengler <spender@grsecurity.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agopnfs-block: removing DM device maybe cause oops when call dev_remove
fanchaoting [Thu, 21 Mar 2013 01:15:30 +0000]
pnfs-block: removing DM device maybe cause oops when call dev_remove

commit 4376c94618c26225e69e17b7c91169c45a90b292 upstream.

when pnfs block using device mapper,if umounting later,it maybe
cause oops. we apply "1 + sizeof(bl_umount_request)" memory for
msg->data, the memory maybe overflow when we do "memcpy(&dataptr
[sizeof(bl_msg)], &bl_umount_request, sizeof(bl_umount_request))",
because the size of bl_msg is more than 1 byte.

Signed-off-by: fanchaoting<fanchaoting@cn.fujitsu.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agomwifiex: cancel cmd timer and free curr_cmd in shutdown process
Bing Zhao [Sat, 16 Mar 2013 01:47:07 +0000]
mwifiex: cancel cmd timer and free curr_cmd in shutdown process

commit 084c7189acb3f969c855536166042e27f5dd703f upstream.

curr_cmd points to the command that is in processing or waiting
for its command response from firmware. If the function shutdown
happens to occur at this time we should cancel the cmd timer and
put the command back to free queue.

Tested-by: Marco Cesarano <marco@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agovt: synchronize_rcu() under spinlock is not nice...
Al Viro [Wed, 27 Mar 2013 00:30:17 +0000]
vt: synchronize_rcu() under spinlock is not nice...

commit e8cd81693bbbb15db57d3c9aa7dd90eda4842874 upstream.

vcs_poll_data_free() calls unregister_vt_notifier(), which calls
atomic_notifier_chain_unregister(), which calls synchronize_rcu().
Do it *after* we'd dropped ->f_lock.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agousb: ftdi_sio: Add support for Mitsubishi FX-USB-AW/-BD
Konstantin Holoborodko [Thu, 28 Mar 2013 15:06:13 +0000]
usb: ftdi_sio: Add support for Mitsubishi FX-USB-AW/-BD

commit 482b0b5d82bd916cc0c55a2abf65bdc69023b843 upstream.

It enhances the driver for FTDI-based USB serial adapters
to recognize Mitsubishi Electric Corp. USB/RS422 Converters
as FT232BM chips and support them.
https://search.meau.com/?q=FX-USB-AW

Signed-off-by: Konstantin Holoborodko <klh.kernel@gmail.com>
Tested-by: Konstantin Holoborodko <klh.kernel@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agotty: atmel_serial_probe(): index of atmel_ports[] fix
Pawel Wieczorkiewicz [Wed, 20 Feb 2013 16:26:20 +0000]
tty: atmel_serial_probe(): index of atmel_ports[] fix

commit 503bded92da283b2f31d87e054c4c6d30c3c2340 upstream.

Index of atmel_ports[ATMEL_MAX_UART] should be smaller
than ATMEL_MAX_UART.

Signed-off-by: Pawel Wieczorkiewicz <wpawel@gmail.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoxen-blkback: fix dispatch_rw_block_io() error path
Jan Beulich [Mon, 11 Mar 2013 09:39:55 +0000]
xen-blkback: fix dispatch_rw_block_io() error path

commit 0e5e098ac22dae38f957e951b70d3cf73beff0f7 upstream.

Commit 7708992 ("xen/blkback: Seperate the bio allocation and the bio
submission") consolidated the pendcnt updates to just a single write,
neglecting the fact that the error path relied on it getting set to 1
up front (such that the decrement in __end_block_io_op() would actually
drop the count to zero, triggering the necessary cleanup actions).

Also remove a misleading and a stale (after said commit) comment.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoxen/blkback: correctly respond to unknown, non-native requests
David Vrabel [Thu, 7 Mar 2013 17:32:01 +0000]
xen/blkback: correctly respond to unknown, non-native requests

commit 0e367ae46503cfe7791460c8ba8434a5d60b2bd5 upstream.

If the frontend is using a non-native protocol (e.g., a 64-bit
frontend with a 32-bit backend) and it sent an unrecognized request,
the request was not translated and the response would have the
incorrect ID.  This may cause the frontend driver to behave
incorrectly or crash.

Since the ID field in the request is always in the same place,
regardless of the request type we can get the correct ID and make a
valid response (which will report BLKIF_RSP_EOPNOTSUPP).

This bug affected 64-bit SLES 11 guests when using a 32-bit backend.
This guest does a BLKIF_OP_RESERVED_1 (BLKIF_OP_PACKET in the SLES
source) and would crash in blkif_int() as the ID in the response would
be invalid.

Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoiommu/amd: Make sure dma_ops are set for hotplug devices
Joerg Roedel [Tue, 26 Mar 2013 21:48:23 +0000]
iommu/amd: Make sure dma_ops are set for hotplug devices

commit c2a2876e863356b092967ea62bebdb4dd663af80 upstream.

There is a bug introduced with commit 27c2127 that causes
devices which are hot unplugged and then hot-replugged to
not have per-device dma_ops set. This causes these devices
to not function correctly. Fixed with this patch.

Reported-by: Andreas Degert <andreas.degert@googlemail.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agotg3: fix length overflow in VPD firmware parsing
Kees Cook [Wed, 27 Mar 2013 06:40:50 +0000]
tg3: fix length overflow in VPD firmware parsing

commit 715230a44310a8cf66fbfb5a46f9a62a9b2de424 upstream.

Commit 184b89044fb6e2a74611dafa69b1dce0d98612c6 ("tg3: Use VPD fw version
when present") introduced VPD parsing that contained a potential length
overflow.

Limit the hardware's reported firmware string length (max 255 bytes) to
stay inside the driver's firmware string length (32 bytes). On overflow,
truncate the formatted firmware string instead of potentially overwriting
portions of the tg3 struct.

http://cansecwest.com/slides/2013/PrivateCore%20CSW%202013.pdf

Signed-off-by: Kees Cook <keescook@chromium.org>
Reported-by: Oded Horovitz <oded@privatecore.com>
Reported-by: Brad Spengler <spender@grsecurity.net>
Cc: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agob43: N-PHY: use more bits for offset in RSSI calibration
Rafał Miłecki [Wed, 27 Mar 2013 07:37:08 +0000]
b43: N-PHY: use more bits for offset in RSSI calibration

commit 2e1253d640eb7f8707d2591c93097c1e9f9c71d5 upstream.

When calculating "offset" for final RSSI calibration we're using numbers
bigger than s8 can hold. We have for example:
offset[j] = 232 - poll_results[j];
formula. If poll_results[j] is small enough (it usually is) we treat
number's bit as a sign bit. For example 232 - 1 becomes:
0xE8 - 0x1 = 0xE7, which is not 231 but -25.

This code was introduced in e0c9a0219a8f542e3946fe972a68aacf8c3f906c
and caused stability regression on some cards, for ex. BCM4322.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

6 years agob43: A fix for DMA transmission sequence errors
Iestyn C. Elfick [Wed, 20 Mar 2013 19:02:31 +0000]
b43: A fix for DMA transmission sequence errors

commit b251412db99ccd4495ce372fec7daee27bf06923 upstream.

Intermittently, b43 will report "Out of order TX status report on DMA ring".
When this happens, the driver must be reset before communication can resume.
The cause of the problem is believed to be an error in the closed-source
firmware; however, all versions of the firmware are affected.

This change uses the observation that the expected status is always 2 less
than the observed value, and supplies a fake status report to skip one
header/data pair.

Not all devices suffer from this problem, but it can occur several times
per second under heavy load. As each occurence kills the unmodified driver,
this patch makes if possible for the affected devices to function. The patch
logs only the first instance of the reset operation to prevent spamming
the logs.

Tested-by: Chris Vine <chris@cvine.freeserve.co.uk>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agob43: N-PHY: increase initial value of "mind" in RSSI calibration
Rafał Miłecki [Tue, 19 Mar 2013 06:52:48 +0000]
b43: N-PHY: increase initial value of "mind" in RSSI calibration

commit e67dd874e60529dbd2e8232babb1e23479ba2ffa upstream.

We're using "mind" variable to find the VCM that got the best polling
results. For each VCM we calculte "currd" which is compared to the
"mind". For PHY rev3+ "currd" gets values around 14k-40k. Looking for a
value smaller than 40 makes no sense, so increase the initial value.

This fixes a regression introduced in 3.4 by commit:
e0c9a0219a8f542e3946fe972a68aacf8c3f906c
(my BCM4322 performance dropped from 18,4Mb/s to 9,26Mb/s)

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agortlwifi: usb: add missing freeing of skbuff
Jussi Kivilinna [Sun, 17 Mar 2013 09:54:04 +0000]
rtlwifi: usb: add missing freeing of skbuff

commit 36ef0b473fbf43d5db23eea4616cc1d18cec245f upstream.

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoHID: usbhid: quirk for Realtek Multi-card reader
Josh Boyer [Mon, 18 Mar 2013 13:45:42 +0000]
HID: usbhid: quirk for Realtek Multi-card reader

commit 3d464d9b71ef2f2b40a4bc9dcf06794fd1be9d12 upstream.

This device needs to be added to the quirks list with HID_QUIRK_NO_INIT_REPORTS,
otherwise it causes 10 seconds timeout during report initialization.

This fixes Red Hat bugzilla https://bugzilla.redhat.com/show_bug.cgi?id=806587

Signed-off-by: Josh Boyer <jwboyer@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoath9k_hw: revert chainmask to user configuration after calibration
Felix Fietkau [Fri, 15 Mar 2013 13:53:31 +0000]
ath9k_hw: revert chainmask to user configuration after calibration

commit 74632d11a133b5baf6b9d622dd19d2f944d93d94 upstream.

The commit 'ath9k_hw: fix calibration issues on chainmask that don't
include chain 0' changed the hardware chainmask to the chip chainmask
for the duration of the calibration, but the revert to user
configuration in the reset path runs too early.

That causes some issues with limiting the number of antennas (including
spurious failure in hardware-generated packets).

Fix this by reverting the chainmask after the essential parts of the
calibration that need the workaround, and before NF calibration is run.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Reported-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com>
Tested-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agocan: sja1000: fix define conflict on SH
Marc Kleine-Budde [Wed, 27 Mar 2013 10:36:42 +0000]
can: sja1000: fix define conflict on SH

commit f901b6bc404b67d96eca739857c097e022727b71 upstream.

Thias patch fixes a define conflict between the SH architecture and the sja1000
driver:

    drivers/net/can/sja1000/sja1000.h:59:0: warning:
        "REG_SR" redefined [enabled by default]
    arch/sh/include/asm/ptrace_32.h:25:0: note:
         this is the location of the previous definition

A SJA1000_ prefix is added to the offending sja1000 define only, to make a
minimal patch suited for stable. A later patch will add a SJA1000_ prefix to
all defines in sja1000.h.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agosysfs: handle failure path correctly for readdir()
Ming Lei [Wed, 20 Mar 2013 15:25:25 +0000]
sysfs: handle failure path correctly for readdir()

commit e5110f411d2ee35bf8d202ccca2e89c633060dca upstream.

In case of 'if (filp->f_pos ==  0 or 1)' of sysfs_readdir(),
the failure from filldir() isn't handled, and the reference counter
of the sysfs_dirent object pointed by filp->private_data will be
released without clearing filp->private_data, so use after free
bug will be triggered later.

This patch returns immeadiately under the situation for fixing the bug,
and it is reasonable to return from readdir() when filldir() fails.

Reported-by: Dave Jones <davej@redhat.com>
Tested-by: Sasha Levin <levinsasha928@gmail.com>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agosysfs: fix race between readdir and lseek
Ming Lei [Wed, 20 Mar 2013 15:25:24 +0000]
sysfs: fix race between readdir and lseek

commit 991f76f837bf22c5bb07261cfd86525a0a96650c upstream.

While readdir() is running, lseek() may set filp->f_pos as zero,
then may leave filp->private_data pointing to one sysfs_dirent
object without holding its reference counter, so the sysfs_dirent
object may be used after free in next readdir().

This patch holds inode->i_mutex to avoid the problem since
the lock is always held in readdir path.

Reported-by: Dave Jones <davej@redhat.com>
Tested-by: Sasha Levin <levinsasha928@gmail.com>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agostaging: comedi: s626: fix continuous acquisition
Ian Abbott [Fri, 22 Mar 2013 15:16:29 +0000]
staging: comedi: s626: fix continuous acquisition

commit e4317ce877a31dbb9d96375391c1c4ad2210d637 upstream.

For the s626 driver, there is a bug in the handling of asynchronous
commands on the AI subdevice when the stop source is `TRIG_NONE`.  The
command should run continuously until cancelled, but the interrupt
handler stops the command running after the first scan.

The command set-up function `s626_ai_cmd()` contains this code:

switch (cmd->stop_src) {
case TRIG_COUNT:
/*  data arrives as one packet */
devpriv->ai_sample_count = cmd->stop_arg;
devpriv->ai_continous = 0;
break;
case TRIG_NONE:
/*  continous acquisition */
devpriv->ai_continous = 1;
devpriv->ai_sample_count = 0;
break;
}

The interrupt handler `s626_irq_handler()` contains this code:

if (!(devpriv->ai_continous))
devpriv->ai_sample_count--;
if (devpriv->ai_sample_count <= 0) {
devpriv->ai_cmd_running = 0;
/* ... */
}

So `devpriv->ai_sample_count` is only decremented for the `TRIG_COUNT`
case, but `devpriv->ai_cmd_running` is set to 0 (and the command
stopped) regardless.

Fix this in `s626_ai_cmd()` by setting `devpriv->ai_sample_count = 1`
for the `TRIG_NONE` case.  The interrupt handler will not decrement it
so it will remain greater than 0 and the check for stopping the
acquisition will fail.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoBluetooth: Add support for Dell[QCA 0cf3:817a]
Ming Lei [Mon, 18 Mar 2013 15:45:11 +0000]
Bluetooth: Add support for Dell[QCA 0cf3:817a]

commit ebaf5795ef57a70a042ea259448a465024e2821d upstream.

Add support for the AR9462 chip

T:  Bus=03 Lev=01 Prnt=01 Port=08 Cnt=01 Dev#=  5 Spd=12   MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0cf3 ProdID=817a Rev= 0.02
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms

Signed-off-by: Ming Lei <ming.lei@canonical.com>
Cc: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoBluetooth: Add support for Dell[QCA 0cf3:0036]
Ming Lei [Fri, 15 Mar 2013 03:00:39 +0000]
Bluetooth: Add support for Dell[QCA 0cf3:0036]

commit d66629c1325399cf080ba8b2fb086c10e5439cdd upstream.

Add support for the AR9462 chip

T:  Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  3 Spd=12   MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0cf3 ProdID=0036 Rev= 0.02
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
A:  FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms

Signed-off-by: Ming Lei <ming.lei@canonical.com>
Cc: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoBluetooth: Fix not closing SCO sockets in the BT_CONNECT2 state
Vinicius Costa Gomes [Wed, 13 Mar 2013 22:46:20 +0000]
Bluetooth: Fix not closing SCO sockets in the BT_CONNECT2 state

commit eb20ff9c91ddcb2d55c1849a87d3db85af5e88a9 upstream.

With deferred setup for SCO, it is possible that userspace closes the
socket when it is in the BT_CONNECT2 state, after the Connect Request is
received but before the Accept Synchonous Connection is sent.

If this happens the following crash was observed, when the connection is
terminated:

[  +0.000003] hci_sync_conn_complete_evt: hci0 status 0x10
[  +0.000005] sco_connect_cfm: hcon ffff88003d1bd800 bdaddr 40:98:4e:32:d7:39 status 16
[  +0.000003] sco_conn_del: hcon ffff88003d1bd800 conn ffff88003cc8e300, err 110
[  +0.000015] BUG: unable to handle kernel NULL pointer dereference at 0000000000000199
[  +0.000906] IP: [<ffffffff810620dd>] __lock_acquire+0xed/0xe82
[  +0.000000] PGD 3d21f067 PUD 3d291067 PMD 0
[  +0.000000] Oops: 0002 [#1] SMP
[  +0.000000] Modules linked in: rfcomm bnep btusb bluetooth
[  +0.000000] CPU 0
[  +0.000000] Pid: 1481, comm: kworker/u:2H Not tainted 3.9.0-rc1-25019-gad82cdd #1 Bochs Bochs
[  +0.000000] RIP: 0010:[<ffffffff810620dd>]  [<ffffffff810620dd>] __lock_acquire+0xed/0xe82
[  +0.000000] RSP: 0018:ffff88003c3c19d8  EFLAGS: 00010002
[  +0.000000] RAX: 0000000000000001 RBX: 0000000000000246 RCX: 0000000000000000
[  +0.000000] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88003d1be868
[  +0.000000] RBP: ffff88003c3c1a98 R08: 0000000000000002 R09: 0000000000000000
[  +0.000000] R10: ffff88003d1be868 R11: ffff88003e20b000 R12: 0000000000000002
[  +0.000000] R13: ffff88003aaa8000 R14: 000000000000006e R15: ffff88003d1be850
[  +0.000000] FS:  0000000000000000(0000) GS:ffff88003e200000(0000) knlGS:0000000000000000
[  +0.000000] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[  +0.000000] CR2: 0000000000000199 CR3: 000000003c1cb000 CR4: 00000000000006b0
[  +0.000000] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  +0.000000] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[  +0.000000] Process kworker/u:2H (pid: 1481, threadinfo ffff88003c3c0000, task ffff88003aaa8000)
[  +0.000000] Stack:
[  +0.000000]  ffffffff81b16342 0000000000000000 0000000000000000 ffff88003d1be868
[  +0.000000]  ffffffff00000000 00018c0c7863e367 000000003c3c1a28 ffffffff8101efbd
[  +0.000000]  0000000000000000 ffff88003e3d2400 ffff88003c3c1a38 ffffffff81007c7a
[  +0.000000] Call Trace:
[  +0.000000]  [<ffffffff8101efbd>] ? kvm_clock_read+0x34/0x3b
[  +0.000000]  [<ffffffff81007c7a>] ? paravirt_sched_clock+0x9/0xd
[  +0.000000]  [<ffffffff81007fd4>] ? sched_clock+0x9/0xb
[  +0.000000]  [<ffffffff8104fd7a>] ? sched_clock_local+0x12/0x75
[  +0.000000]  [<ffffffff810632d1>] lock_acquire+0x93/0xb1
[  +0.000000]  [<ffffffffa0022339>] ? spin_lock+0x9/0xb [bluetooth]
[  +0.000000]  [<ffffffff8105f3d8>] ? lock_release_holdtime.part.22+0x4e/0x55
[  +0.000000]  [<ffffffff814f6038>] _raw_spin_lock+0x40/0x74
[  +0.000000]  [<ffffffffa0022339>] ? spin_lock+0x9/0xb [bluetooth]
[  +0.000000]  [<ffffffff814f6936>] ? _raw_spin_unlock+0x23/0x36
[  +0.000000]  [<ffffffffa0022339>] spin_lock+0x9/0xb [bluetooth]
[  +0.000000]  [<ffffffffa00230cc>] sco_conn_del+0x76/0xbb [bluetooth]
[  +0.000000]  [<ffffffffa002391d>] sco_connect_cfm+0x2da/0x2e9 [bluetooth]
[  +0.000000]  [<ffffffffa000862a>] hci_proto_connect_cfm+0x38/0x65 [bluetooth]
[  +0.000000]  [<ffffffffa0008d30>] hci_sync_conn_complete_evt.isra.79+0x11a/0x13e [bluetooth]
[  +0.000000]  [<ffffffffa000cd96>] hci_event_packet+0x153b/0x239d [bluetooth]
[  +0.000000]  [<ffffffff814f68ff>] ? _raw_spin_unlock_irqrestore+0x48/0x5c
[  +0.000000]  [<ffffffffa00025f6>] hci_rx_work+0xf3/0x2e3 [bluetooth]
[  +0.000000]  [<ffffffff8103efed>] process_one_work+0x1dc/0x30b
[  +0.000000]  [<ffffffff8103ef83>] ? process_one_work+0x172/0x30b
[  +0.000000]  [<ffffffff8103e07f>] ? spin_lock_irq+0x9/0xb
[  +0.000000]  [<ffffffff8103fc8d>] worker_thread+0x123/0x1d2
[  +0.000000]  [<ffffffff8103fb6a>] ? manage_workers+0x240/0x240
[  +0.000000]  [<ffffffff81044211>] kthread+0x9d/0xa5
[  +0.000000]  [<ffffffff81044174>] ? __kthread_parkme+0x60/0x60
[  +0.000000]  [<ffffffff814f75bc>] ret_from_fork+0x7c/0xb0
[  +0.000000]  [<ffffffff81044174>] ? __kthread_parkme+0x60/0x60
[  +0.000000] Code: d7 44 89 8d 50 ff ff ff 4c 89 95 58 ff ff ff e8 44 fc ff ff 44 8b 8d 50 ff ff ff 48 85 c0 4c 8b 95 58 ff ff ff 0f 84 7a 04 00 00 <f0> ff 80 98 01 00 00 83 3d 25 41 a7 00 00 45 8b b5 e8 05 00 00
[  +0.000000] RIP  [<ffffffff810620dd>] __lock_acquire+0xed/0xe82
[  +0.000000]  RSP <ffff88003c3c19d8>
[  +0.000000] CR2: 0000000000000199
[  +0.000000] ---[ end trace e73cd3b52352dd34 ]---

Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Tested-by: Frederic Dalleau <frederic.dalleau@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agotile: expect new initramfs name from hypervisor file system
Chris Metcalf [Fri, 29 Mar 2013 17:50:21 +0000]
tile: expect new initramfs name from hypervisor file system

commit ff7f3efb9abf986f4ecd8793a9593f7ca4d6431a upstream.

The current Tilera boot infrastructure now provides the initramfs
to Linux as a Tilera-hypervisor file named "initramfs", rather than
"initramfs.cpio.gz", as before.  (This makes it reasonable to use
other compression techniques than gzip on the file without having to
worry about the name causing confusion.)  Adapt to use the new name,
but also fall back to checking for the old name.

Cc'ing to stable so that older kernels will remain compatible with
newer Tilera boot infrastructure.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoSUNRPC: Add barriers to ensure read ordering in rpc_wake_up_task_queue_locked
Trond Myklebust [Mon, 25 Mar 2013 15:23:40 +0000]
SUNRPC: Add barriers to ensure read ordering in rpc_wake_up_task_queue_locked

commit 1166fde6a923c30f4351515b6a9a1efc513e7d00 upstream.

We need to be careful when testing task->tk_waitqueue in
rpc_wake_up_task_queue_locked, because it can be changed while we
are holding the queue->lock.
By adding appropriate memory barriers, we can ensure that it is safe to
test task->tk_waitqueue for equality if the RPC_TASK_QUEUED bit is set.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agokernel/signal.c: use __ARCH_HAS_SA_RESTORER instead of SA_RESTORER
Andrew Morton [Wed, 13 Mar 2013 21:59:34 +0000]
kernel/signal.c: use __ARCH_HAS_SA_RESTORER instead of SA_RESTORER

commit 522cff142d7d2f9230839c9e1f21a4d8bcc22a4a upstream.

__ARCH_HAS_SA_RESTORER is the preferred conditional for use in 3.9 and
later kernels, per Kees.

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Emese Revfy <re.emese@gmail.com>
Cc: Emese Revfy <re.emese@gmail.com>
Cc: PaX Team <pageexec@freemail.hu>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Serge Hallyn <serge.hallyn@canonical.com>
Cc: Julien Tinnes <jln@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agosignal: Define __ARCH_HAS_SA_RESTORER so we know whether to clear sa_restorer
Ben Hutchings [Mon, 26 Nov 2012 03:24:19 +0000]
signal: Define __ARCH_HAS_SA_RESTORER so we know whether to clear sa_restorer

Vaguely based on upstream commit 574c4866e33d 'consolidate kernel-side
struct sigaction declarations'.

flush_signal_handlers() needs to know whether sigaction::sa_restorer
is defined, not whether SA_RESTORER is defined.  Define the
__ARCH_HAS_SA_RESTORER macro to indicate this.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoLinux 3.4.38
Greg Kroah-Hartman [Thu, 28 Mar 2013 19:12:41 +0000]
Linux 3.4.38

6 years agoasus-laptop: Do not call HWRS on init
Ben Hutchings [Thu, 29 Nov 2012 08:12:37 +0000]
asus-laptop: Do not call HWRS on init

commit cb7da022450cdaaebd33078b6b32fb7dd2aaf6db upstream.

Since commit 8871e99f89b7 ('asus-laptop: HRWS/HWRS typo'), module
initialisation is very slow on the Asus UL30A.  The HWRS method takes
about 12 seconds to run, and subsequent initialisation also seems to
be delayed.  Since we don't really need the result, don't bother
calling it on init.  Those who are curious can still get the result
through the 'infos' device attribute.

Update the comment about HWRS in show_infos().

Reported-by: ryan <draziw+deb@gmail.com>
References: http://bugs.debian.org/692436
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agort2x00: error in configurations with mesh support disabled
Felix Fietkau [Tue, 26 Feb 2013 15:09:55 +0000]
rt2x00: error in configurations with mesh support disabled

commit 6ef9e2f6d12ce9e2120916804d2ddd46b954a70b upstream.

If CONFIG_MAC80211_MESH is not set, cfg80211 will now allow advertising
interface combinations with NL80211_IFTYPE_MESH_POINT present.
Add appropriate ifdefs to avoid running into errors.

[Backported for 3.8-stable. Removed code of simultaneous AP and mesh
mode added in 4a5fc6d 3.9-rc1.]

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Lingzhu Xiang <lxiang@redhat.com>
Reviewed-by: CAI Qian <caiqian@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoexec: use -ELOOP for max recursion depth
Kees Cook [Tue, 18 Dec 2012 00:03:20 +0000]
exec: use -ELOOP for max recursion depth

commit d740269867021faf4ce38a449353d2b986c34a67 upstream.

To avoid an explosion of request_module calls on a chain of abusive
scripts, fail maximum recursion with -ELOOP instead of -ENOEXEC. As soon
as maximum recursion depth is hit, the error will fail all the way back
up the chain, aborting immediately.

This also has the side-effect of stopping the user's shell from attempting
to reexecute the top-level file as a shell script. As seen in the
dash source:

        if (cmd != path_bshell && errno == ENOEXEC) {
                *argv-- = cmd;
                *argv = cmd = path_bshell;
                goto repeat;
        }

The above logic was designed for running scripts automatically that lacked
the "#!" header, not to re-try failed recursion. On a legitimate -ENOEXEC,
things continue to behave as the shell expects.

Additionally, when tracking recursion, the binfmt handlers should not be
involved. The recursion being tracked is the depth of calls through
search_binary_handler(), so that function should be exclusively responsible
for tracking the depth.

Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: halfdog <me@halfdog.net>
Cc: P J P <ppandit@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoi915: initialize CADL in opregion
Lekensteyn [Mon, 25 Jun 2012 22:36:24 +0000]
i915: initialize CADL in opregion

commit d627b62ff8d4d36761adbcd90ff143d79c94ab22 upstream.

This is rather a hack to fix brightness hotkeys on a Clevo laptop. CADL is not
used anywhere in the driver code at the moment, but it could be used in BIOS as
is the case with the Clevo laptop.

The Clevo B7130 requires the CADL field to contain at least the ID of
the LCD device. If this field is empty, the ACPI methods that are called
on pressing brightness / display switching hotkeys will not trigger a
notification. As a result, it appears as no hotkey has been pressed.

Reference: https://bugs.freedesktop.org/show_bug.cgi?id=45452
Tested-by: Peter Wu <lekensteyn@gmail.com>
Signed-off-by: Peter Wu <lekensteyn@gmail.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agotools: hv: Netlink source address validation allows DoS
Tomas Hozza [Thu, 8 Nov 2012 09:53:29 +0000]
tools: hv: Netlink source address validation allows DoS

commit 95a69adab9acfc3981c504737a2b6578e4d846ef upstream.

The source code without this patch caused hypervkvpd to exit when it processed
a spoofed Netlink packet which has been sent from an untrusted local user.
Now Netlink messages with a non-zero nl_pid source address are ignored
and a warning is printed into the syslog.

Signed-off-by: Tomas Hozza <thozza@redhat.com>
Acked-by: K. Y. Srinivasan <kys@microsoft.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoudf: avoid info leak on export
Mathias Krause [Thu, 12 Jul 2012 06:46:55 +0000]
udf: avoid info leak on export

commit 0143fc5e9f6f5aad4764801015bc8d4b4a278200 upstream.

For type 0x51 the udf.parent_partref member in struct fid gets copied
uninitialized to userland. Fix this by initializing it to 0.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoisofs: avoid info leak on export
Mathias Krause [Thu, 12 Jul 2012 06:46:54 +0000]
isofs: avoid info leak on export

commit fe685aabf7c8c9f138e5ea900954d295bf229175 upstream.

For type 1 the parent_offset member in struct isofs_fid gets copied
uninitialized to userland. Fix this by initializing it to 0.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agokey: Fix resource leak
Alan Cox [Fri, 28 Sep 2012 11:20:02 +0000]
key: Fix resource leak

commit a84a921978b7d56e0e4b87ffaca6367429b4d8ff upstream.

On an error iov may still have been reallocated and need freeing

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoUSB: io_ti: fix get_icount for two port adapters
Johan Hovold [Tue, 19 Mar 2013 08:21:08 +0000]
USB: io_ti: fix get_icount for two port adapters

commit 5492bf3d5655b4954164f69c02955a7fca267611 upstream.

Add missing get_icount field to two-port driver.

The two-port driver was not updated when switching to the new icount
interface in commit 0bca1b913aff ("tty: Convert the USB drivers to the
new icount interface").

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoUSB: garmin_gps: fix memory leak on disconnect
Johan Hovold [Tue, 19 Mar 2013 08:21:07 +0000]
USB: garmin_gps: fix memory leak on disconnect

commit 618aa1068df29c37a58045fe940f9106664153fd upstream.

Remove bogus disconnect test introduced by 95bef012e ("USB: more serial
drivers writing after disconnect") which prevented queued data from
being freed on disconnect.

The possible IO it was supposed to prevent is long gone.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoudf: Fix bitmap overflow on large filesystems with small block size
Jan Kara [Tue, 5 Feb 2013 12:59:56 +0000]
udf: Fix bitmap overflow on large filesystems with small block size

commit 89b1f39eb4189de745fae554b0d614d87c8d5c63 upstream.

For large UDF filesystems with 512-byte blocks the number of necessary
bitmap blocks is larger than 2^16 so s_nr_groups in udf_bitmap overflows
(the number will overflow for filesystems larger than 128 GB with
512-byte blocks). That results in ENOSPC errors despite the filesystem
has plenty of free space.

Fix the problem by changing s_nr_groups' type to 'int'. That is enough
even for filesystems 2^32 blocks (UDF maximum) and 512-byte blocksize.

Reported-and-tested-by: v10lator@myway.de
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Jim Trigg <jtrigg@spamcop.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agonohz: Make tick_nohz_irq_exit() irq safe
Frederic Weisbecker [Wed, 20 Feb 2013 15:15:36 +0000]
nohz: Make tick_nohz_irq_exit() irq safe

commit e5ab012c3271990e8457055c25cafddc1ae8aa6b upstream.

As it stands, irq_exit() may or may not be called with
irqs disabled, depending on __ARCH_IRQ_EXIT_IRQS_DISABLED
that the arch can define.

It makes tick_nohz_irq_exit() unsafe. For example two
interrupts can race in tick_nohz_stop_sched_tick(): the inner
most one computes the expiring time on top of the timer list,
then it's interrupted right before reprogramming the
clock. The new interrupt enqueues a new timer list timer,
it reprogram the clock to take it into account and it exits.
The CPUs resumes the inner most interrupt and performs the clock
reprogramming without considering the new timer list timer.

This regression has been introduced by:
     280f06774afedf849f0b34248ed6aff57d0f6908
     ("nohz: Separate out irq exit and idle loop dyntick logic")

Let's fix it right now with the appropriate protections.

A saner long term solution will be to remove
__ARCH_IRQ_EXIT_IRQS_DISABLED and mandate that irq_exit() is called
with interrupts disabled.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linuxfoundation.org>
Link: http://lkml.kernel.org/r/1361373336-11337-1-git-send-email-fweisbec@gmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Lingzhu Xiang <lxiang@redhat.com>
Reviewed-by: CAI Qian <caiqian@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoUSB: serial: fix interface refcounting
Johan Hovold [Tue, 19 Mar 2013 08:21:09 +0000]
USB: serial: fix interface refcounting

commit d7971051e4df825e0bc11b995e87bfe86355b8e5 upstream.

Make sure the interface is not released before our serial device.

Note that drivers are still not allowed to access the interface in
any way that may interfere with another driver that may have gotten
bound to the same interface after disconnect returns.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoUSB: cdc-acm: fix device unregistration
Johan Hovold [Tue, 19 Mar 2013 08:21:06 +0000]
USB: cdc-acm: fix device unregistration

commit cb25505fc604292c70fc02143fc102f54c8595f0 upstream.

Unregister tty device in disconnect as is required by the USB stack.

By deferring unregistration to when the last tty reference is dropped,
the parent interface device can get unregistered before the child
resulting in broken hotplug events being generated when the tty is
finally closed:

KERNEL[2290.798128] remove   /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:3.1 (usb)
KERNEL[2290.804589] remove   /devices/pci0000:00/0000:00:1d.7/usb2/2-1 (usb)
KERNEL[2294.554799] remove   /2-1:3.1/tty/ttyACM0 (tty)

The driver must deal with tty callbacks after disconnect by checking the
disconnected flag. Specifically, further opens must be prevented and
this is already implemented.

Acked-by: Oliver Neukum <oneukum@suse.de>
Cc: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoUSB: xhci: correctly enable interrupts
Hannes Reinecke [Mon, 4 Mar 2013 16:14:43 +0000]
USB: xhci: correctly enable interrupts

commit 00eed9c814cb8f281be6f0f5d8f45025dc0a97eb upstream.

xhci has its own interrupt enabling routine, which will try to
use MSI-X/MSI if present. So the usb core shouldn't try to enable
legacy interrupts; on some machines the xhci legacy IRQ setting
is invalid.

v3: Be careful to not break XHCI_BROKEN_MSI workaround (by trenn)

Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Oliver Neukum <oneukum@suse.de>
Cc: Thomas Renninger <trenn@suse.de>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Frederik Himpe <fhimpe@vub.ac.be>
Cc: David Haerdeman <david@hardeman.nu>
Cc: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Reviewed-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoUSB: xhci - fix bit definitions for IMAN register
Dmitry Torokhov [Mon, 25 Feb 2013 18:56:01 +0000]
USB: xhci - fix bit definitions for IMAN register

commit f8264340e694604863255cc0276491d17c402390 upstream.

According to XHCI specification (5.5.2.1) the IP is bit 0 and IE is bit 1
of IMAN register. Previously their definitions were reversed.

Even though there are no ill effects being observed from the swapped
definitions (because IMAN_IP is RW1C and in legacy PCI case we come in
with it already set to 1 so it was clearing itself even though we were
setting IMAN_IE instead of IMAN_IP), we should still correct the values.

This patch should be backported to kernels as old as 2.6.36, that
contain the commit 4e833c0b87a30798e67f06120cecebef6ee9644c "xhci: don't
re-enable IE constantly".

Signed-off-by: Dmitry Torokhov <dtor@vmware.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agox86-64: Fix the failure case in copy_user_handle_tail()
CQ Tang [Mon, 18 Mar 2013 15:02:21 +0000]
x86-64: Fix the failure case in copy_user_handle_tail()

commit 66db3feb486c01349f767b98ebb10b0c3d2d021b upstream.

The increment of "to" in copy_user_handle_tail() will have incremented
before a failure has been noted.  This causes us to skip a byte in the
failure case.

Only do the increment when assured there is no failure.

Signed-off-by: CQ Tang <cq.tang@intel.com>
Link: http://lkml.kernel.org/r/20130318150221.8439.993.stgit@phlsvslse11.ph.intel.com
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoclockevents: Don't allow dummy broadcast timers
Mark Rutland [Thu, 7 Mar 2013 15:09:24 +0000]
clockevents: Don't allow dummy broadcast timers

commit a7dc19b8652c862d5b7c4d2339bd3c428bd29c4a upstream.

Currently tick_check_broadcast_device doesn't reject clock_event_devices
with CLOCK_EVT_FEAT_DUMMY, and may select them in preference to real
hardware if they have a higher rating value. In this situation, the
dummy timer is responsible for broadcasting to itself, and the core
clockevents code may attempt to call non-existent callbacks for
programming the dummy, eventually leading to a panic.

This patch makes tick_check_broadcast_device always reject dummy timers,
preventing this problem.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Jon Medhurst (Tixy) <tixy@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoIPoIB: Fix send lockup due to missed TX completion
Mike Marciniszyn [Tue, 26 Feb 2013 15:46:27 +0000]
IPoIB: Fix send lockup due to missed TX completion

commit 1ee9e2aa7b31427303466776f455d43e5e3c9275 upstream.

Commit f0dc117abdfa ("IPoIB: Fix TX queue lockup with mixed UD/CM
traffic") attempts to solve an issue where unprocessed UD send
completions can deadlock the netdev.

The patch doesn't fully resolve the issue because if more than half
the tx_outstanding's were UD and all of the destinations are RC
reachable, arming the CQ doesn't solve the issue.

This patch uses the IB_CQ_REPORT_MISSED_EVENTS on the
ib_req_notify_cq().  If the rc is above 0, the UD send cq completion
callback is called directly to re-arm the send completion timer.

This issue is seen in very large parallel filesystem deployments
and the patch has been shown to correct the issue.

Reviewed-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoext4: fix data=journal fast mount/umount hang
Theodore Ts'o [Wed, 20 Mar 2013 13:42:11 +0000]
ext4: fix data=journal fast mount/umount hang

commit 2b405bfa84063bfa35621d2d6879f52693c614b0 upstream.

In data=journal mode, if we unmount the file system before a
transaction has a chance to complete, when the journal inode is being
evicted, we can end up calling into jbd2_log_wait_commit() for the
last transaction, after the journalling machinery has been shut down.

Arguably we should adjust ext4_should_journal_data() to return FALSE
for the journal inode, but the only place it matters is
ext4_evict_inode(), and so to save a bit of CPU time, and to make the
patch much more obviously correct by inspection(tm), we'll fix it by
explicitly not trying to waiting for a journal commit when we are
evicting the journal inode, since it's guaranteed to never succeed in
this case.

This can be easily replicated via:

     mount -t ext4 -o data=journal /dev/vdb /vdb ; umount /vdb

------------[ cut here ]------------
WARNING: at /usr/projects/linux/ext4/fs/jbd2/journal.c:542 __jbd2_log_start_commit+0xba/0xcd()
Hardware name: Bochs
JBD2: bad log_start_commit: 3005630206 3005630206 0 0
Modules linked in:
Pid: 2909, comm: umount Not tainted 3.8.0-rc3 #1020
Call Trace:
 [<c015c0ef>] warn_slowpath_common+0x68/0x7d
 [<c02b7e7d>] ? __jbd2_log_start_commit+0xba/0xcd
 [<c015c177>] warn_slowpath_fmt+0x2b/0x2f
 [<c02b7e7d>] __jbd2_log_start_commit+0xba/0xcd
 [<c02b8075>] jbd2_log_start_commit+0x24/0x34
 [<c0279ed5>] ext4_evict_inode+0x71/0x2e3
 [<c021f0ec>] evict+0x94/0x135
 [<c021f9aa>] iput+0x10a/0x110
 [<c02b7836>] jbd2_journal_destroy+0x190/0x1ce
 [<c0175284>] ? bit_waitqueue+0x50/0x50
 [<c028d23f>] ext4_put_super+0x52/0x294
 [<c020efe3>] generic_shutdown_super+0x48/0xb4
 [<c020f071>] kill_block_super+0x22/0x60
 [<c020f3e0>] deactivate_locked_super+0x22/0x49
 [<c020f5d6>] deactivate_super+0x30/0x33
 [<c0222795>] mntput_no_expire+0x107/0x10c
 [<c02233a7>] sys_umount+0x2cf/0x2e0
 [<c02233ca>] sys_oldumount+0x12/0x14
 [<c08096b8>] syscall_call+0x7/0xb
---[ end trace 6a954cc790501c1f ]---
jbd2_log_wait_commit: error: j_commit_request=-1289337090, tid=0

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agousb-storage: add unusual_devs entry for Samsung YP-Z3 mp3 player
Dmitry Artamonow [Sat, 9 Mar 2013 16:30:58 +0000]
usb-storage: add unusual_devs entry for Samsung YP-Z3 mp3 player

commit 29f86e66428ee083aec106cca1748dc63d98ce23 upstream.

Device stucks on filesystem writes, unless following quirk is passed:
  echo 04e8:5136:m > /sys/module/usb_storage/parameters/quirks

Add corresponding entry to unusual_devs.h

Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoext4: fix the wrong number of the allocated blocks in ext4_split_extent()
Zheng Liu [Mon, 11 Mar 2013 01:20:23 +0000]
ext4: fix the wrong number of the allocated blocks in ext4_split_extent()

commit 3a2256702e47f68f921dfad41b1764d05c572329 upstream.

This commit fixes a wrong return value of the number of the allocated
blocks in ext4_split_extent.  When the length of blocks we want to
allocate is greater than the length of the current extent, we return a
wrong number.  Let's see what happens in the following case when we
call ext4_split_extent().

  map: [48, 72]
  ex:  [32, 64, u]

'ex' will be split into two parts:
  ex1: [32, 47, u]
  ex2: [48, 64, w]

'map->m_len' is returned from this function, and the value is 24.  But
the real length is 16.  So it should be fixed.

Meanwhile in this commit we use right length of the allocated blocks
when get_reserved_cluster_alloc in ext4_ext_handle_uninitialized_extents
is called.

Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agojbd2: fix use after free in jbd2_journal_dirty_metadata()
Jan Kara [Mon, 11 Mar 2013 17:24:56 +0000]
jbd2: fix use after free in jbd2_journal_dirty_metadata()

commit ad56edad089b56300fd13bb9eeb7d0424d978239 upstream.

jbd2_journal_dirty_metadata() didn't get a reference to journal_head it
was working with. This is OK in most of the cases since the journal head
should be attached to a transaction but in rare occasions when we are
journalling data, __ext4_journalled_writepage() can race with
jbd2_journal_invalidatepage() stripping buffers from a page and thus
journal head can be freed under hands of jbd2_journal_dirty_metadata().

Fix the problem by getting own journal head reference in
jbd2_journal_dirty_metadata() (and also in jbd2_journal_set_triggers()
which can possibly have the same issue).

Reported-by: Zheng Liu <gnehzuil.liu@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agocifs: ignore everything in SPNEGO blob after mechTypes
Jeff Layton [Mon, 11 Mar 2013 13:52:19 +0000]
cifs: ignore everything in SPNEGO blob after mechTypes

commit f853c616883a8de966873a1dab283f1369e275a1 upstream.

We've had several reports of people attempting to mount Windows 8 shares
and getting failures with a return code of -EINVAL. The default sec=
mode changed recently to sec=ntlmssp. With that, we expect and parse a
SPNEGO blob from the server in the NEGOTIATE reply.

The current decode_negTokenInit function first parses all of the
mechTypes and then tries to parse the rest of the negTokenInit reply.
The parser however currently expects a mechListMIC or nothing to follow the
mechTypes, but Windows 8 puts a mechToken field there instead to carry
some info for the new NegoEx stuff.

In practice, we don't do anything with the fields after the mechTypes
anyway so I don't see any real benefit in continuing to parse them.
This patch just has the kernel ignore the fields after the mechTypes.
We'll probably need to reinstate some of this if we ever want to support
NegoEx.

Reported-by: Jason Burgess <jason@jacknife2.dns2go.com>
Reported-by: Yan Li <elliot.li.tech@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agodrm/radeon/benchmark: make sure bo blit copy exists before using it
Alex Deucher [Tue, 12 Mar 2013 16:53:13 +0000]
drm/radeon/benchmark: make sure bo blit copy exists before using it

commit fa8d387dc3f62062a6b4afbbb2a3438094fd8584 upstream.

Fixes a segfault on asics without a blit callback.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=62239

Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agodrm/radeon: add support for Richland APUs
Alex Deucher [Fri, 8 Mar 2013 18:44:15 +0000]
drm/radeon: add support for Richland APUs

commit e4d170633fde379f39a90f8a5e7eb619b5d1144d upstream.

Richland APUs are a new version of the Trinity APUs
with performance and power management improvements.

Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agodrm/radeon: add Richland pci ids
Alex Deucher [Fri, 8 Mar 2013 18:36:54 +0000]
drm/radeon: add Richland pci ids

commit b75bbaa038ffc426e88ea3df6c4ae11834fc3e4f upstream.

Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agotarget/iscsi: Fix mutual CHAP auth on big-endian arches
Andy Grover [Mon, 4 Mar 2013 21:52:09 +0000]
target/iscsi: Fix mutual CHAP auth on big-endian arches

commit 7ac9ad11b2a5cf77a92b58ee6b672ad2fa155eb1 upstream.

See https://bugzilla.redhat.com/show_bug.cgi?id=916290

Used a temp var since we take its address in sg_init_one.

Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agomm/hugetlb: fix total hugetlbfs pages count when using memory overcommit accouting
Wanpeng Li [Fri, 22 Mar 2013 22:04:40 +0000]
mm/hugetlb: fix total hugetlbfs pages count when using memory overcommit accouting

commit d00285884c0892bb1310df96bce6056e9ce9b9d9 upstream.

hugetlb_total_pages is used for overcommit calculations but the current
implementation considers only the default hugetlb page size (which is
either the first defined hugepage size or the one specified by
default_hugepagesz kernel boot parameter).

If the system is configured for more than one hugepage size, which is
possible since commit a137e1cc6d6e ("hugetlbfs: per mount huge page
sizes") then the overcommit estimation done by __vm_enough_memory()
(resp.  shown by meminfo_proc_show) is not precise - there is an
impression of more available/allowed memory.  This can lead to an
unexpected ENOMEM/EFAULT resp.  SIGSEGV when memory is accounted.

Testcase:
  boot: hugepagesz=1G hugepages=1
  the default overcommit ratio is 50
  before patch:

    egrep 'CommitLimit' /proc/meminfo
    CommitLimit:     55434168 kB

  after patch:

    egrep 'CommitLimit' /proc/meminfo
    CommitLimit:     54909880 kB

[akpm@linux-foundation.org: coding-style tweak]
Signed-off-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoKMS: fix EDID detailed timing frame rate
Torsten Duwe [Sat, 23 Mar 2013 14:39:34 +0000]
KMS: fix EDID detailed timing frame rate

commit c19b3b0f6eed552952845e4ad908dba2113d67b4 upstream.

When KMS has parsed an EDID "detailed timing", it leaves the frame rate
zeroed.  Consecutive (debug-) output of that mode thus yields 0 for
vsync.  This simple fix also speeds up future invocations of
drm_mode_vrefresh().

While it is debatable whether this qualifies as a -stable fix I'd apply
it for consistency's sake; drm_helper_probe_single_connector_modes()
does the same thing already for all probed modes.

Signed-off-by: Torsten Duwe <duwe@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoKMS: fix EDID detailed timing vsync parsing
Torsten Duwe [Sat, 23 Mar 2013 14:38:22 +0000]
KMS: fix EDID detailed timing vsync parsing

commit 16dad1d743d31a104a849c8944e6b9eb479f6cd7 upstream.

EDID spreads some values across multiple bytes; bit-fiddling is needed
to retrieve these.  The current code to parse "detailed timings" has a
cut&paste error that results in a vsync offset of at most 15 lines
instead of 63.

See

   http://en.wikipedia.org/wiki/EDID

and in the "EDID Detailed Timing Descriptor" see bytes 10+11 show why
that needs to be a left shift.

Signed-off-by: Torsten Duwe <duwe@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agodrm/i915: bounds check execbuffer relocation count
Kees Cook [Tue, 12 Mar 2013 00:31:45 +0000]
drm/i915: bounds check execbuffer relocation count

commit 3118a4f652c7b12c752f3222af0447008f9b2368 upstream.

It is possible to wrap the counter used to allocate the buffer for
relocation copies. This could lead to heap writing overflows.

CVE-2013-0913

v3: collapse test, improve comment
v2: move check into validate_exec_list

Signed-off-by: Kees Cook <keescook@chromium.org>
Reported-by: Pinkie Pie
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agomwifiex: fix potential out-of-boundary access to ibss rate table
Bing Zhao [Fri, 8 Mar 2013 04:00:16 +0000]
mwifiex: fix potential out-of-boundary access to ibss rate table

commit 5f0fabf84d7b52f979dcbafa3d3c530c60d9a92c upstream.

smatch found this error:

CHECK   drivers/net/wireless/mwifiex/join.c
  drivers/net/wireless/mwifiex/join.c:1121
  mwifiex_cmd_802_11_ad_hoc_join()
  error: testing array offset 'i' after use.

Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agortlwifi: rtl8192cu: Fix problem that prevents reassociation
Larry Finger [Wed, 13 Mar 2013 15:28:13 +0000]
rtlwifi: rtl8192cu: Fix problem that prevents reassociation

commit 9437a248e7cac427c898bdb11bd1ac6844a1ead4 upstream.

The driver was failing to clear the BSSID when a disconnect happened. That
prevented a reconnection. This problem is reported at
https://bugzilla.redhat.com/show_bug.cgi?id=789605,
https://bugzilla.redhat.com/show_bug.cgi?id=866786,
https://bugzilla.redhat.com/show_bug.cgi?id=906734, and
https://bugzilla.kernel.org/show_bug.cgi?id=46171.

Thanks to Jussi Kivilinna for making the critical observation
that led to the solution.

Reported-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
Tested-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
Tested-by: Alessandro Lannocca <alessandro.lannocca@gmail.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agortlwifi: rtl8192cu: Fix schedule while atomic bug splat
Larry Finger [Wed, 27 Feb 2013 20:10:30 +0000]
rtlwifi: rtl8192cu: Fix schedule while atomic bug splat

commit 664899786cb49cb52f620e06ac19c0be524a7cfa upstream.

When run at debug 3 or higher, rtl8192cu reports a BUG as follows:

BUG: scheduling while atomic: kworker/u:0/5281/0x00000002
INFO: lockdep is turned off.
Modules linked in: rtl8192cu rtl8192c_common rtlwifi fuse af_packet bnep bluetooth b43 mac80211 cfg80211 ipv6 snd_hda_codec_conexant kvm_amd k
vm snd_hda_intel snd_hda_codec bcma rng_core snd_pcm ssb mmc_core snd_seq snd_timer snd_seq_device snd i2c_nforce2 sr_mod pcmcia forcedeth i2c_core soundcore
 cdrom sg serio_raw k8temp hwmon joydev ac battery pcmcia_core snd_page_alloc video button wmi autofs4 ext4 mbcache jbd2 crc16 thermal processor scsi_dh_alua
 scsi_dh_hp_sw scsi_dh_rdac scsi_dh_emc scsi_dh ata_generic pata_acpi pata_amd [last unloaded: rtlwifi]
Pid: 5281, comm: kworker/u:0 Tainted: G        W    3.8.0-wl+ #119
Call Trace:
 [<ffffffff814531e7>] __schedule_bug+0x62/0x70
 [<ffffffff81459af0>] __schedule+0x730/0xa30
 [<ffffffff81326e49>] ? usb_hcd_link_urb_to_ep+0x19/0xa0
 [<ffffffff8145a0d4>] schedule+0x24/0x70
 [<ffffffff814575ec>] schedule_timeout+0x18c/0x2f0
 [<ffffffff81459ec0>] ? wait_for_common+0x40/0x180
 [<ffffffff8133f461>] ? ehci_urb_enqueue+0xf1/0xee0
 [<ffffffff810a579d>] ? trace_hardirqs_on+0xd/0x10
 [<ffffffff81459f65>] wait_for_common+0xe5/0x180
 [<ffffffff8107d1c0>] ? try_to_wake_up+0x2d0/0x2d0
 [<ffffffff8145a08e>] wait_for_completion_timeout+0xe/0x10
 [<ffffffff8132ab1c>] usb_start_wait_urb+0x8c/0x100
 [<ffffffff8132adf9>] usb_control_msg+0xd9/0x130
 [<ffffffffa057dd8d>] _usb_read_sync+0xcd/0x140 [rtlwifi]
 [<ffffffffa057de0e>] _usb_read32_sync+0xe/0x10 [rtlwifi]
 [<ffffffffa04b0555>] rtl92cu_update_hal_rate_table+0x1a5/0x1f0 [rtl8192cu]

The cause is a synchronous read from routine rtl92cu_update_hal_rate_table().
The resulting output is not critical, thus the debug statement is
deleted.

Reported-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agotracing: Fix free of probe entry by calling call_rcu_sched()
Steven Rostedt (Red Hat) [Wed, 13 Mar 2013 15:15:19 +0000]
tracing: Fix free of probe entry by calling call_rcu_sched()

commit 740466bc89ad8bd5afcc8de220f715f62b21e365 upstream.

Because function tracing is very invasive, and can even trace
calls to rcu_read_lock(), RCU access in function tracing is done
with preempt_disable_notrace(). This requires a synchronize_sched()
for updates and not a synchronize_rcu().

Function probes (traceon, traceoff, etc) must be freed after
a synchronize_sched() after its entry has been removed from the
hash. But call_rcu() is used. Fix this by using call_rcu_sched().

Also fix the usage to use hlist_del_rcu() instead of hlist_del().

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agotracing: Fix race in snapshot swapping
Steven Rostedt (Red Hat) [Tue, 12 Mar 2013 15:32:32 +0000]
tracing: Fix race in snapshot swapping

commit 2721e72dd10f71a3ba90f59781becf02638aa0d9 upstream.

Although the swap is wrapped with a spin_lock, the assignment
of the temp buffer used to swap is not within that lock.
It needs to be moved into that lock, otherwise two swaps
happening on two different CPUs, can end up using the wrong
temp buffer to assign in the swap.

Luckily, all current callers of the swap function appear to have
their own locks. But in case something is added that allows two
different callers to call the swap, then there's a chance that
this race can trigger and corrupt the buffers.

New code is coming soon that will allow for this race to trigger.

I've Cc'd stable, so this bug will not show up if someone backports
one of the changes that can trigger this bug.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agodrm/i915: restrict kernel address leak in debugfs
Kees Cook [Mon, 11 Mar 2013 19:25:19 +0000]
drm/i915: restrict kernel address leak in debugfs

commit 2563a4524febe8f4a98e717e02436d1aaf672aa2 upstream.

Masks kernel address info-leak in object dumps with the %pK suffix,
so they cannot be used to target kernel memory corruption attacks if
the kptr_restrict sysctl is set.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoALSA: snd-usb: mixer: ignore -EINVAL in snd_usb_mixer_controls()
Daniel Mack [Tue, 19 Mar 2013 20:09:25 +0000]
ALSA: snd-usb: mixer: ignore -EINVAL in snd_usb_mixer_controls()

commit 83ea5d18d74f032a760fecde78c0210f66f7f70c upstream.

Creation of individual mixer controls may fail, but that shouldn't cause
the entire mixer creation to fail. Even worse, if the mixer creation
fails, that will error out the entire device probing.

All the functions called by parse_audio_unit() should return -EINVAL if
they find descriptors that are unsupported or believed to be malformed,
so we can safely handle this error code as a non-fatal condition in
snd_usb_mixer_controls().

That fixes a long standing bug which is commonly worked around by
adding quirks which make the driver ignore entire interfaces. Some of
them might now be unnecessary.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Reported-and-tested-by: Rodolfo Thomazelli <pe.soberbo@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoALSA: snd-usb: mixer: propagate errors up the call chain
Daniel Mack [Tue, 19 Mar 2013 20:09:24 +0000]
ALSA: snd-usb: mixer: propagate errors up the call chain

commit 4d7b86c98e445b075c2c4c3757eb6d3d6efbe72e upstream.

In check_input_term() and parse_audio_feature_unit(), propagate the
error value that has been returned by a failing function instead of
-EINVAL. That helps cleaning up the error pathes in the mixer.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoALSA: hda - Fix typo in checking IEC958 emphasis bit
Takashi Iwai [Wed, 20 Mar 2013 14:42:00 +0000]
ALSA: hda - Fix typo in checking IEC958 emphasis bit

commit a686fd141e20244ad75f80ad54706da07d7bb90a upstream.

There is a typo in convert_to_spdif_status() about checking the
emphasis IEC958 status bit.  It should check the given value instead
of the resultant value.

Reported-by: Martin Weishart <martin.weishart@telosalliance.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoALSA: hda/cirrus - Fix the digital beep registration
Takashi Iwai [Mon, 18 Mar 2013 10:00:44 +0000]
ALSA: hda/cirrus - Fix the digital beep registration

commit a86b1a2cd2f81f74e815e07f756edd7bc5b6f034 upstream.

The argument passed to snd_hda_attach_beep_device() is a widget NID
while spec->beep_amp holds the composed value for amp controls.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agosfc: Only use TX push if a single descriptor is to be written
Ben Hutchings [Wed, 27 Feb 2013 16:50:38 +0000]
sfc: Only use TX push if a single descriptor is to be written

[ Upstream commit fae8563b25f73dc584a07bcda7a82750ff4f7672 ]

Using TX push when notifying the NIC of multiple new descriptors in
the ring will very occasionally cause the TX DMA engine to re-use an
old descriptor.  This can result in a duplicated or partly duplicated
packet (new headers with old data), or an IOMMU page fault.  This does
not happen when the pushed descriptor is the only one written.

TX push also provides little latency benefit when a packet requires
more than one descriptor.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agosfc: Disable soft interrupt handling during efx_device_detach_sync()
Ben Hutchings [Tue, 5 Mar 2013 01:03:47 +0000]
sfc: Disable soft interrupt handling during efx_device_detach_sync()

[ Upstream commit 35205b211c8d17a8a0b5e8926cb7c73e9a7ef1ad ]

efx_device_detach_sync() locks all TX queues before marking the device
detached and thus disabling further TX scheduling.  But it can still
be interrupted by TX completions which then result in TX scheduling in
soft interrupt context.  This will deadlock when it tries to acquire
a TX queue lock that efx_device_detach_sync() already acquired.

To avoid deadlock, we must use netif_tx_{,un}lock_bh().

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agosfc: Detach net device when stopping queues for reconfiguration
Ben Hutchings [Mon, 28 Jan 2013 19:01:06 +0000]
sfc: Detach net device when stopping queues for reconfiguration

[ Upstream commit 29c69a4882641285a854d6d03ca5adbba68c0034 ]

We must only ever stop TX queues when they are full or the net device
is not 'ready' so far as the net core, and specifically the watchdog,
is concerned.  Otherwise, the watchdog may fire *immediately* if no
packets have been added to the queue in the last 5 seconds.

The device is ready if all the following are true:

(a) It has a qdisc
(b) It is marked present
(c) It is running
(d) The link is reported up

(a) and (c) are normally true, and must not be changed by a driver.
(d) is under our control, but fake link changes may disturb userland.
This leaves (b).  We already mark the device absent during reset
and self-test, but we need to do the same during MTU changes and ring
reallocation.  We don't need to do this when the device is brought
down because then (c) is already false.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agosfc: Fix efx_rx_buf_offset() in the presence of swiotlb
Ben Hutchings [Thu, 10 Jan 2013 23:51:54 +0000]
sfc: Fix efx_rx_buf_offset() in the presence of swiotlb

[ Upstream commits b590ace09d51cd39744e0f7662c5e4a0d1b5d952 and
  c73e787a8db9117d59b5180baf83203a42ecadca ]

We assume that the mapping between DMA and virtual addresses is done
on whole pages, so we can find the page offset of an RX buffer using
the lower bits of the DMA address.  However, swiotlb maps in units of
2K, breaking this assumption.

Add an explicit page_offset field to struct efx_rx_buffer.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agosfc: Properly sync RX DMA buffer when it is not the last in the page
Ben Hutchings [Thu, 20 Dec 2012 18:48:20 +0000]
sfc: Properly sync RX DMA buffer when it is not the last in the page

[ Upstream commit 3a68f19d7afb80f548d016effbc6ed52643a8085 ]

We may currently allocate two RX DMA buffers to a page, and only unmap
the page when the second is completed.  We do not sync the first RX
buffer to be completed; this can result in packet loss or corruption
if the last RX buffer completed in a NAPI poll is the first in a page
and is not DMA-coherent.  (In the middle of a NAPI poll, we will
handle the following RX completion and unmap the page *before* looking
at the content of the first buffer.)

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
[bwh: Backported to 3.4: adjust context]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agosfc: Correctly initialise reset_method in siena_test_chip()
Ben Hutchings [Sat, 1 Dec 2012 01:55:27 +0000]
sfc: Correctly initialise reset_method in siena_test_chip()

[ Upstream commit ef492f11efed9a6a1686bf914fb74468df59385c ]

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agosfc: Avoid generating over-length MC_CMD_FLUSH_RX_QUEUES request
Ben Hutchings [Wed, 19 Sep 2012 01:53:34 +0000]
sfc: Avoid generating over-length MC_CMD_FLUSH_RX_QUEUES request

[ Upstream commit 450783747f42dfa3883920acfad4acdd93ce69af ]

MCDI supports requests up to 252 bytes long, which is only enough to
pass 63 RX queue IDs to MC_CMD_FLUSH_RX_QUEUES.  However a VF may have
up to 64 RX queues, and if we try to flush them all we will generate
an over-length request and BUG() in efx_mcdi_copyin().  Currently
all VF drivers limit themselves to 32 RX queues, so reducing the
limit to 63 does no harm.

Also add a BUILD_BUG_ON in efx_mcdi_flush_rxqs() so we remember to
deal with the same problem there if EFX_MAX_CHANNELS is increased.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agosfc: Disable VF queues during register self-test
Ben Hutchings [Wed, 4 Jul 2012 02:58:33 +0000]
sfc: Disable VF queues during register self-test

[ Upstream commit d4f2cecce138c34960c467d0ae38a6d4bcd6af7b ]

Currently VF queues and drivers may remain active during this test.
This could cause memory corruption or spurious test failures.
Therefore we reset the port/function before running these tests on
Siena.

On Falcon this doesn't work: we have to do some additional
initialisation before some blocks will work again.  So refactor the
reset/register-test sequence into an efx_nic_type method so
efx_selftest() doesn't have to consider such quirks.

In the process, fix another minor bug: Siena does not have an
'invisible' reset and the self-test currently fails to push the PHY
configuration after resetting.  Passing RESET_TYPE_ALL to
efx_reset_{down,up}() fixes this.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agosfc: Fix timekeeping in efx_mcdi_poll()
Ben Hutchings [Sat, 1 Dec 2012 02:21:17 +0000]
sfc: Fix timekeeping in efx_mcdi_poll()

[ Upstream commit ebf98e797b4e26ad52ace1511a0b503ee60a6cd4 ]

efx_mcdi_poll() uses get_seconds() to read the current time and to
implement a polling timeout.  The use of this function was chosen
partly because it could easily be replaced in a co-sim environment
with a macro that read the simulated time.

Unfortunately the real get_seconds() returns the system time (real
time) which is subject to adjustment by e.g. ntpd.  If the system time
is adjusted forward during a polled MCDI operation, the effective
timeout can be shorter than the intended 10 seconds, resulting in a
spurious failure.  It is also possible for a backward adjustment to
delay detection of a areal failure.

Use jiffies instead, and change MCDI_RPC_TIMEOUT to be denominated in
jiffies.  Also correct rounding of the timeout: check time > finish
(or rather time_after(time, finish)) and not time >= finish.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agosfc: lock TX queues when calling netif_device_detach()
Daniel Pieczko [Wed, 17 Oct 2012 12:21:23 +0000]
sfc: lock TX queues when calling netif_device_detach()

[ Upstream commit c2f3b8e3a44b6fe9e36704e30157ebe1a88c08b1 ]

The assertion of netif_device_present() at the top of
efx_hard_start_xmit() may fail if we don't do this.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
[bwh: Backported to 3.4: adjust context]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agosfc: Work-around flush timeout when flushes have completed
Daniel Pieczko [Tue, 2 Oct 2012 12:36:18 +0000]
sfc: Work-around flush timeout when flushes have completed

[ Upstream commit 525d9e824018cd7cc8d8d44832ddcd363abfe6e1 ]

We sometimes hit a "failed to flush" timeout on some TX queues, but the
flushes have completed and the flush completion events seem to go missing.
In this case, we can check the TX_DESC_PTR_TBL register and drain the
queues if the flushes had finished.

[bwh: Minor fixes to coding style]
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agosfc: Really disable flow control while flushing
Ben Hutchings [Thu, 6 Sep 2012 15:52:31 +0000]
sfc: Really disable flow control while flushing

[ Upstream commit d5e8cc6c946e0857826dcfbb3585068858445bfe ]

Receiving pause frames can block TX queue flushes.  Earlier changes
work around this by reconfiguring the MAC during flushes for VFs, but
during flushes for the PF we would only change the fc_disable counter.
Unless the MAC is reconfigured for some other reason during the flush
(which I would not expect to happen) this had no effect at all.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agosfc: Fix MCDI structure field lookup
Ben Hutchings [Tue, 11 Sep 2012 20:46:41 +0000]
sfc: Fix MCDI structure field lookup

[ Upstream commit 0a6e5008a9df678b48f8d4e57601aa4270df6c14 ]

The least significant bit number (LBN) of a field within an MCDI
structure is counted from the start of the structure, not the
containing dword.  In MCDI_ARRAY_FIELD() we need to mask it rather
than using the usual EFX_DWORD_FIELD() macro.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agosfc: Add parentheses around use of bitfield macro arguments
Ben Hutchings [Tue, 11 Sep 2012 20:37:36 +0000]
sfc: Add parentheses around use of bitfield macro arguments

[ Upstream commit 9724a8504c875145f5a513bb8eca50671cee23b4 ]

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agosfc: Convert firmware subtypes to native byte order in efx_mcdi_get_board_cfg()
Ben Hutchings [Thu, 6 Sep 2012 23:58:10 +0000]
sfc: Convert firmware subtypes to native byte order in efx_mcdi_get_board_cfg()

[ Upstream commit bfeed902946a31692e7a24ed355b6d13ac37d014 ]

On big-endian systems the MTD partition names currently have mangled
subtype numbers and are not recognised by the firmware update tool
(sfupdate).

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agosfc: Do not attempt to flush queues if DMA is disabled
Stuart Hodgson [Fri, 30 Mar 2012 12:04:51 +0000]
sfc: Do not attempt to flush queues if DMA is disabled

[ Upstream commit 3dca9d2dc285faf1910d405b65df845cab061356 ]

efx_nic_fatal_interrupt() disables DMA before scheduling a reset.
After this, we need not and *cannot* flush queues.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoinet: limit length of fragment queue hash table bucket lists
Hannes Frederic Sowa [Fri, 15 Mar 2013 11:32:30 +0000]
inet: limit length of fragment queue hash table bucket lists

[ Upstream commit 5a3da1fe9561828d0ca7eca664b16ec2b9bf0055 ]

This patch introduces a constant limit of the fragment queue hash
table bucket list lengths. Currently the limit 128 is choosen somewhat
arbitrary and just ensures that we can fill up the fragment cache with
empty packets up to the default ip_frag_high_thresh limits. It should
just protect from list iteration eating considerable amounts of cpu.

If we reach the maximum length in one hash bucket a warning is printed.
This is implemented on the caller side of inet_frag_find to distinguish
between the different users of inet_fragment.c.

I dropped the out of memory warning in the ipv4 fragment lookup path,
because we already get a warning by the slab allocator.

Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Jesper Dangaard Brouer <jbrouer@redhat.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agobnx2x: fix occasional statistics off-by-4GB error
Maciej Żenczykowski [Fri, 15 Mar 2013 11:56:17 +0000]
bnx2x: fix occasional statistics off-by-4GB error

[ Upstream commit b009aac12cd0fe34293c68af8ac48b85be3bd858 ]

The UPDATE_QSTAT function introduced on February 15, 2012
in commit 1355b704b9ba "bnx2x: consistent statistics after
internal driver reload" incorrectly fails to handle overflow
during addition of the lower 32-bit field of a stat.

This bug is present since 3.4-rc1 and should thus be considered
a candidate for stable 3.4+ releases.

Google-Bug-Id: 8374428
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Cc: Mintz Yuval <yuvalmin@broadcom.com>
Acked-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agovhost/net: fix heads usage of ubuf_info
Michael S. Tsirkin [Sun, 17 Mar 2013 02:46:09 +0000]
vhost/net: fix heads usage of ubuf_info

[ Upstream commit 46aa92d1ba162b4b3d6b7102440e459d4e4ee255 ]

ubuf info allocator uses guest controlled head as an index,
so a malicious guest could put the same head entry in the ring twice,
and we will get two callbacks on the same value.
To fix use upend_idx which is guaranteed to be unique.

Reported-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Cc: stable@kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agortnetlink: Mask the rta_type when range checking
Vlad Yasevich [Wed, 13 Mar 2013 04:18:58 +0000]
rtnetlink: Mask the rta_type when range checking

[ Upstream commit a5b8db91442fce9c9713fcd656c3698f1adde1d6 ]

Range/validity checks on rta_type in rtnetlink_rcv_msg() do
not account for flags that may be set.  This causes the function
to return -EINVAL when flags are set on the type (for example
NLA_F_NESTED).

Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>