10 years agoBtrfs: set device->total_disk_bytes when adding new device
Yan Zheng [Thu, 4 Jun 2009 13:23:50 +0000]
Btrfs: set device->total_disk_bytes when adding new device

It was not being properly initialized, and so the size saved to
disk was not correct.

Signed-off-by: Chris Mason <chris.mason@oracle.com>

10 years agoBtrfs: Spelling fix in btrfs_lookup_first_block_group comments
Sankar P [Thu, 14 May 2009 17:52:22 +0000]
Btrfs: Spelling fix in btrfs_lookup_first_block_group comments

Signed-off-by: Sankar P <sankar.curiosity@gmail.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

10 years agoBtrfs: make show_options result match actual option names
Sage Weil [Thu, 14 May 2009 17:52:21 +0000]
Btrfs: make show_options result match actual option names

The notreelog and flushoncommit mount options were being printed slightly
differently.

Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

10 years agoBtrfs: remove outdated comment in btrfs_ioctl_resize()
Li Hong [Thu, 14 May 2009 17:52:21 +0000]
Btrfs: remove outdated comment in btrfs_ioctl_resize()

In Li Zefan's commit dae7b665cf6d6e6e733f1c9c16cf55547dd37e33,
a combination call of kmalloc() and copy_from_user() is replaced by
memdup_user(). So btrfs_ioctl_resize() doesn't use GFP_NOFS any more.

Signed-off-by: Li Hong <lihong.hi@gmail.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

10 years agoBtrfs: remove some WARN_ONs in the IO failure path
Chris Mason [Thu, 14 May 2009 17:31:21 +0000]
Btrfs: remove some WARN_ONs in the IO failure path

These debugging WARN_ONs make too much console noise during regular
IO failures.  An IO failure will still generate a number of messages
as we verify checksums etc, but these two are not needed.

Signed-off-by: Chris Mason <chris.mason@oracle.com>

10 years agoBtrfs: Don't loop forever on metadata IO failures
Chris Mason [Thu, 14 May 2009 17:24:30 +0000]
Btrfs: Don't loop forever on metadata IO failures

When a btrfs metadata read fails, the first thing we try to do is find
a good copy on another mirror of the block.  If this fails, read_tree_block()
ends up returning a buffer that isn't up to date.

The btrfs btree reading code was reworked to drop locks and repeat
the search when IO was done, but the changes didn't add a check for failed
reads.  The end result was looping forever on buffers that were never
going to become up to date.

Signed-off-by: Chris Mason <chris.mason@oracle.com>

10 years agoBtrfs: init inode ordered_data_close flag properly
Chris Mason [Thu, 14 May 2009 17:10:02 +0000]
Btrfs: init inode ordered_data_close flag properly

This flag is used to decide when we need to send a given file through
the ordered code to make sure it is fully written before a transaction
commits.  It was not being properly set to zero when the inode was
being setup.

Signed-off-by: Chris Mason <chris.mason@oracle.com>

10 years agoBtrfs: look for acls during btrfs_read_locked_inode
Chris Mason [Mon, 27 Apr 2009 15:47:50 +0000]
Btrfs: look for acls during btrfs_read_locked_inode

This changes btrfs_read_locked_inode() to peek ahead in the btree for acl items.
If it is certain a given inode has no acls, it will set the in memory acl
fields to null to avoid acl lookups completely.

Signed-off-by: Chris Mason <chris.mason@oracle.com>

10 years agoBtrfs: fix acl caching
Chris Mason [Mon, 27 Apr 2009 14:49:53 +0000]
Btrfs: fix acl caching

Linus noticed the btrfs code to cache acls wasn't properly caching
a NULL acl when the inode didn't have any acls.  This meant the common
case of no acls resulted in expensive btree searches every time the
kernel checked permissions (which is quite often).

This is a modified version of Linus' original patch:

Properly set initial acl fields to BTRFS_ACL_NOT_CACHED in the inode.
This forces an acl lookup when permission checks are done.

Fix btrfs_get_acl to avoid lookups and locking when the inode acls fields
are set to null.

Fix btrfs_get_acl to use the right return value from __btrfs_getxattr
when deciding to cache a NULL acl.  It was storing a NULL acl when
__btrfs_getxattr return -ENOENT, but __btrfs_getxattr was actually returning
-ENODATA for this case.

Signed-off-by: Chris Mason <chris.mason@oracle.com>

10 years agoBtrfs: Fix a bunch of printk() warnings.
Joel Becker [Tue, 21 Apr 2009 19:38:29 +0000]
Btrfs: Fix a bunch of printk() warnings.

Just happened to notice a bunch of %llu vs u64 warnings.  Here's a patch
to cast them all.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

10 years agoBtrfs: Fix a trivial warning using max() of u64 vs ULL.
Joel Becker [Tue, 21 Apr 2009 19:38:30 +0000]
Btrfs: Fix a trivial warning using max() of u64 vs ULL.

A small warning popped up on ia64 because inode-map.c was comparing a
u64 object id with the ULL FIRST_FREE_OBJECTID.  My first thought was
that all the OBJECTID constants should contain the u64 cast because
btrfs code deals entirely in u64s.  But then I saw how large that was,
and figured I'd just fix the max() call.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

10 years agoBtrfs: remove unused btrfs_bit_radix slab
Chris Mason [Mon, 27 Apr 2009 11:49:10 +0000]
Btrfs: remove unused btrfs_bit_radix slab

Signed-off-by: Chris Mason <chris.mason@oracle.com>

10 years agoBtrfs: ratelimit IO error printks
Chris Mason [Mon, 27 Apr 2009 11:29:05 +0000]
Btrfs: ratelimit IO error printks

Btrfs has printks for various IO errors, including bad checksums and
mismatches between what we expect the block headers to contain and what
we actually find on the disk.

Longer term we need a real reporting mechanism for this, but for now
printk is going to have to do.

Signed-off-by: Chris Mason <chris.mason@oracle.com>

10 years agoBtrfs: remove #if 0 code
Chris Mason [Mon, 27 Apr 2009 11:29:04 +0000]
Btrfs: remove #if 0 code

Btrfs had some old code sitting around under #if 0, this drops it.

Signed-off-by: Chris Mason <chris.mason@oracle.com>

10 years agoBtrfs: When shrinking, only update disk size on success
Chris Ball [Mon, 27 Apr 2009 11:29:03 +0000]
Btrfs: When shrinking, only update disk size on success

Previously, we updated a device's size prior to attempting a shrink
operation.  This patch moves the device resizing logic to only happen if
the shrink completes successfully.  In the process, it introduces a new
field to btrfs_device -- disk_total_bytes -- to track the on-disk size.

Signed-off-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

10 years agoBtrfs: fix deadlocks and stalls on dead root removal
Chris Mason [Fri, 24 Apr 2009 18:39:25 +0000]
Btrfs: fix deadlocks and stalls on dead root removal

After a transaction commit, the old root of the subvol btrees are sent through
snapshot removal.  This is what actually frees up any blocks replaced by
COW, and anything the old blocks pointed to.

Snapshot deletion will pause when a transaction commit has started, which
helps to avoid a huge amount of delayed reference count updates piling up
as the transaction is trying to close.

But, this pause happens after the snapshot deletion process has asked other
procs on the system to throttle back a bit so that it can make progress.

We don't want to throttle everyone while we're waiting for the transaction
commit, it leads to deadlocks in the user transaction ioctls used by Ceph
and makes things slower in general.

This patch changes things to avoid the throttling while we sleep.

Signed-off-by: Chris Mason <chris.mason@oracle.com>

10 years agoBtrfs: fix fallocate deadlock on inode extent lock
Chris Mason [Fri, 24 Apr 2009 18:39:24 +0000]
Btrfs: fix fallocate deadlock on inode extent lock

The btrfs fallocate call takes an extent lock on the entire range
being fallocated, and then runs through insert_reserved_extent on each
extent as they are allocated.

The problem with this is that btrfs_drop_extents may decide to try
and take the same extent lock fallocate was already holding.  The solution
used here is to push down knowledge of the range that is already locked
going into btrfs_drop_extents.

It turns out that at least one other caller had the same bug.

Signed-off-by: Chris Mason <chris.mason@oracle.com>

10 years agoBtrfs: kill btrfs_cache_create
Christoph Hellwig [Mon, 13 Apr 2009 13:33:09 +0000]
Btrfs: kill btrfs_cache_create

Just use kmem_cache_create directly.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

10 years agoBtrfs: don't export symbols
Christoph Hellwig [Mon, 13 Apr 2009 13:33:56 +0000]
Btrfs: don't export symbols

Currently the extent_map code is only for btrfs so don't export it's
symbols.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

10 years agoBtrfs: simplify makefile
Christoph Hellwig [Mon, 13 Apr 2009 13:32:28 +0000]
Btrfs: simplify makefile

Get rid of the hacks for building out of tree, and always use += for
assigning to the object lists.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

10 years agoBtrfs: try to keep a healthy ratio of metadata vs data block groups
Josef Bacik [Tue, 21 Apr 2009 21:40:57 +0000]
Btrfs: try to keep a healthy ratio of metadata vs data block groups

This patch makes the chunk allocator keep a good ratio of metadata vs data
block groups.  By default for every 8 data block groups, we'll allocate 1
metadata chunk, or about 12% of the disk will be allocated for metadata.  This
can be changed by specifying the metadata_ratio mount option.

This is simply the number of data block groups that have to be allocated to
force a metadata chunk allocation.  By making sure we allocate metadata chunks
more often, we are less likely to get into situations where the whole disk
has been allocated as data block groups.

Signed-off-by: Josef Bacik <jbacik@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

10 years agoBtrfs: fix btrfs fallocate oops and deadlock
Chris Mason [Tue, 21 Apr 2009 15:53:38 +0000]
Btrfs: fix btrfs fallocate oops and deadlock

Btrfs fallocate was incorrectly starting a transaction with a lock held
on the extent_io tree for the file, which could deadlock.  Strictly
speaking it was using join_transaction which would be safe, but it is better
to move the transaction outside of the lock.

When preallocated extents are overwritten, btrfs_mark_buffer_dirty was
being called on an unlocked buffer.  This was triggering an assertion and
oops because the lock is supposed to be held.

The bug was calling btrfs_mark_buffer_dirty on a leaf after btrfs_del_item had
been run.  btrfs_del_item takes care of dirtying things, so the solution is a
to skip the btrfs_mark_buffer_dirty call in this case.

Signed-off-by: Chris Mason <chris.mason@oracle.com>

10 years agoBtrfs: use the right node in reada_for_balance
Chris Mason [Mon, 20 Apr 2009 19:50:10 +0000]
Btrfs: use the right node in reada_for_balance

reada_for_balance was using the wrong index into the path node array,
so it wasn't reading the right blocks.  We never directly used the
results of the read done by this function because the btree search is
started over at the end.

This fixes reada_for_balance to reada in the correct node and to
avoid searching past the last slot in the node.  It also makes sure to
hold the parent lock while we are finding the nodes to read.

Signed-off-by: Chris Mason <chris.mason@oracle.com>

10 years agoBtrfs: fix oops on page->mapping->host during writepage
Chris Mason [Mon, 20 Apr 2009 19:50:09 +0000]
Btrfs: fix oops on page->mapping->host during writepage

The extent_io writepage call updates the writepage index in the inode
as it makes progress.  But, it was doing the update after unlocking the page,
which isn't legal because page->mapping can't be trusted once the page
is unlocked.

This lead to an oops, especially common with compression turned on.  The
fix here is to update the writeback index before unlocking the page.

Signed-off-by: Chris Mason <chris.mason@oracle.com>

10 years agoBtrfs: add a priority queue to the async thread helpers
Chris Mason [Mon, 20 Apr 2009 19:50:09 +0000]
Btrfs: add a priority queue to the async thread helpers

Btrfs is using WRITE_SYNC_PLUG to send down synchronous IOs with a
higher priority.  But, the checksumming helper threads prevent it
from being fully effective.

There are two problems.  First, a big queue of pending checksumming
will delay the synchronous IO behind other lower priority writes.  Second,
the checksumming uses an ordered async work queue.  The ordering makes sure
that IOs are sent to the block layer in the same order they are sent
to the checksumming threads.  Usually this gives us less seeky IO.

But, when we start mixing IO priorities, the lower priority IO can delay
the higher priority IO.

This patch solves both problems by adding a high priority list to the async
helper threads, and a new btrfs_set_work_high_prio(), which is used
to make put a new async work item onto the higher priority list.

The ordering is still done on high priority IO, but all of the high
priority bios are ordered separately from the low priority bios.  This
ordering is purely an IO optimization, it is not involved in data
or metadata integrity.

Signed-off-by: Chris Mason <chris.mason@oracle.com>

10 years agoBtrfs: use WRITE_SYNC for synchronous writes
Chris Mason [Mon, 20 Apr 2009 19:50:09 +0000]
Btrfs: use WRITE_SYNC for synchronous writes

Part of reducing fsync/O_SYNC/O_DIRECT latencies is using WRITE_SYNC for
writes we plan on waiting on in the near future.  This patch
mirrors recent changes in other filesystems and the generic code to
use WRITE_SYNC when WB_SYNC_ALL is passed and to use WRITE_SYNC for
other latency critical writes.

Btrfs uses async worker threads for checksumming before the write is done,
and then again to actually submit the bios.  The bio submission code just
runs a per-device list of bios that need to be sent down the pipe.

This list is split into low priority and high priority lists so the
WRITE_SYNC IO happens first.

Signed-off-by: Chris Mason <chris.mason@oracle.com>

10 years agoLinux 2.6.30-rc2
Linus Torvalds [Tue, 14 Apr 2009 20:51:48 +0000]
Linux 2.6.30-rc2

10 years agoMerge branch 'drm-intel-next' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt...
Linus Torvalds [Tue, 14 Apr 2009 20:16:40 +0000]
Merge branch 'drm-intel-next' of git://git./linux/kernel/git/anholt/drm-intel

* 'drm-intel-next' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel:
  drm/i915: fix scheduling while holding the new active list spinlock
  drm/i915: Allow tiling of objects with bit 17 swizzling by the CPU.
  drm/i915: Correctly set the write flag for get_user_pages in pread.
  drm/i915: Fix use of uninitialized var in 40a5f0de
  drm/i915: indicate framebuffer restore key in SysRq help message
  drm/i915: sync hdmi detection by hdmi identifier with 2D
  drm/i915: Fix a mismerge of the IGD patch (new .find_pll hooks missed)
  drm/i915: Implement batch and ring buffer dumping

10 years agox86 microcode: revert some work_on_cpu
Hugh Dickins [Tue, 14 Apr 2009 18:25:42 +0000]
x86 microcode: revert some work_on_cpu

Revert part of af5c820a3169e81af869c113e18ec7588836cd50 ("x86: cpumask:
use work_on_cpu in arch/x86/kernel/microcode_core.c")

That change is causing only one Intel CPU's microcode to be updated e.g.
microcode: CPU3 updated from revision 0x9 to 0x17, date = 2005-04-22
where before it announced that also for CPU0 and CPU1 and CPU2.

We cannot use work_on_cpu() in the CONFIG_MICROCODE_OLD_INTERFACE code,
because Intel's request_microcode_user() involves a copy_from_user() from
/sbin/microcode_ctl, which therefore needs to be on that CPU at the time.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agodrm/i915: fix scheduling while holding the new active list spinlock
Shaohua Li [Wed, 8 Apr 2009 02:58:23 +0000]
drm/i915: fix scheduling while holding the new active list spinlock

regression caused by commit 5e118f4139feafe97e913df67b1f7c1e5083e535:
i915_gem_object_move_to_inactive() should be called in task context,
as it calls fput();

Signed-off-by: Shaohua Li<shaohua.li@intel.com>
[anholt: Add more detail to the comment about the lock break that's added]
Signed-off-by: Eric Anholt <eric@anholt.net>

10 years agoMerge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Tue, 14 Apr 2009 17:12:31 +0000]
Merge branch 'core-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  lockdep: warn about lockdep disabling after kernel taint, fix

10 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi...
Linus Torvalds [Tue, 14 Apr 2009 17:12:07 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/mszeredi/fuse

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: fix "direct_io" private mmap
  fuse: fix argument type in fuse_get_user_pages()

10 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke...
Linus Torvalds [Tue, 14 Apr 2009 17:10:53 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/ryusuke/nilfs2

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2:
  nilfs2: fix possible mismatch of sufile counters on recovery
  nilfs2: segment usage file cleanups
  nilfs2: fix wrong accounting and duplicate brelse in nilfs_sufile_set_error
  nilfs2: simplify handling of active state of segments fix
  nilfs2: remove module version
  nilfs2: fix lockdep recursive locking warning on meta data files
  nilfs2: fix lockdep recursive locking warning on bmap
  nilfs2: return f_fsid for statfs2

10 years agoMerge branch 'fixes-for-linus' of git://git.monstr.eu/linux-2.6-microblaze
Linus Torvalds [Tue, 14 Apr 2009 17:10:16 +0000]
Merge branch 'fixes-for-linus' of git://git.monstr.eu/linux-2.6-microblaze

* 'fixes-for-linus' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: Add missing FILE tag to MAINTAINERS
  microblaze: remove duplicated #include's
  microblaze: struct device - replace bus_id with dev_name()
  microblaze: Simplify copy_thread()
  microblaze: Add TIMESTAMPING constants to socket.h
  microblaze: Add missing empty ftrace.h file
  microblaze: Fix problem with removing zero length files

10 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6
Linus Torvalds [Tue, 14 Apr 2009 17:00:42 +0000]
Merge git://git./linux/kernel/git/lethal/sh-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  sh: Add in PCI bus for DMA API debugging.
  sh: Pre-allocate a reasonable number of DMA debug entries.
  sh: sh7786: modify usb setup timeout judgment bug.
  MAINTAINERS: Update sh architecture file patterns.
  sh: ap325: use edge control for ov772x camera
  sh: Plug in support for ARCH=sh64 using sh SRCARCH.
  sh: urquell: Fix up address mapping in board comments.
  sh: Add support for DMA API debugging.
  sh: Provide cpumask_of_pcibus() to fix NUMA build.
  sh: urquell: Add board comment
  sh: wire up sys_preadv/sys_pwritev() syscalls.
  sh: sh7785lcr: fix PCI address map for 32-bit mode
  sh: intc: Added resume from hibernation support to the intc

10 years agoFix lpfc_parse_bg_err()'s use of do_div()
David Howells [Tue, 14 Apr 2009 16:08:34 +0000]
Fix lpfc_parse_bg_err()'s use of do_div()

Fix lpfc_parse_bg_err()'s use of do_div().  It should be passing a 64-bit
variable as the first parameter.  However, since it's only using a 32-bit
variable, it doesn't need to use do_div() at all, but can instead use the
division operator.

This deals with the following warnings:

CC drivers/scsi/lpfc/lpfc_scsi.o
  drivers/scsi/lpfc/lpfc_scsi.c: In function 'lpfc_parse_bg_err':
  drivers/scsi/lpfc/lpfc_scsi.c:1397: warning: comparison of distinct pointer types lacks a cast
  drivers/scsi/lpfc/lpfc_scsi.c:1397: warning: right shift count >= width of type
  drivers/scsi/lpfc/lpfc_scsi.c:1397: warning: passing argument 1 of '__div64_32' from incompatible pointer type

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agotty: Update some of the USB kernel doc
Leandro Dorileo [Tue, 14 Apr 2009 13:59:51 +0000]
tty: Update some of the USB kernel doc

Updates some usb_serial_port members documentation.

Signed-off-by: Leandro Dorileo <ldorileo@gmail.com>
Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoparport_pc: Fix build failure drivers/parport/parport_pc.c for powerpc
Tony Breeds [Tue, 14 Apr 2009 13:58:41 +0000]
parport_pc: Fix build failure drivers/parport/parport_pc.c for powerpc

In commit 51dcdfec6a274afc1c6fce180d582add9ff512c0 ("parport: Use the
PCI IRQ if offered") parport_pc_probe_port() gained an irqflags arg.
This isn't being supplied on powerpc.  This patch make powerpc fallback
to the old behaviour, that is using "0" for irqflags.

Fixes build failure:

  In file included from drivers/parport/parport_pc.c:68:
  arch/powerpc/include/asm/parport.h: In function 'parport_pc_find_nonpci_ports':
  arch/powerpc/include/asm/parport.h:32: error: too few arguments to function 'parport_pc_probe_port'
  arch/powerpc/include/asm/parport.h:32: error: too few arguments to function 'parport_pc_probe_port'
  arch/powerpc/include/asm/parport.h:32: error: too few arguments to function 'parport_pc_probe_port'
  make[3]: *** [drivers/parport/parport_pc.o] Error 1

Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoparport: Fix various uses of parport_pc
Alan Cox [Tue, 14 Apr 2009 13:58:23 +0000]
parport: Fix various uses of parport_pc

These got overlooked first time around.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agotty: Fix leak in ti-usb
Alan Cox [Tue, 14 Apr 2009 13:58:11 +0000]
tty: Fix leak in ti-usb

If the ti-usb adapter returns an zero data length frame (which happens)
then we leak a kref.  Found by Christoph Mair <christoph.mair@gmail.com>
who proposed a patch.  The patch here is different as Christoph's patch
didn't work for the case where tty = NULL and data arrived but Christoph
did all the hard work chasing it down.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agocdc-acm: Fix long standing abuse of tty->low_latency
Alan Cox [Tue, 14 Apr 2009 13:57:36 +0000]
cdc-acm: Fix long standing abuse of tty->low_latency

ACM sets the low latency flag but calls the flip buffer routines from
IRQ context which isn't permitted (and as of 2.6.29 causes a warning
hence this one was caught)

Fortunatelt ACM doesn't need to set this flag in the first place as it
only set it to work around problems in ancient (pre tty flip rewrite)
kernels.

Reported-by: Chuck Ebbert <cebbert@redhat.com>
Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agomicroblaze: Add missing FILE tag to MAINTAINERS
Michal Simek [Tue, 14 Apr 2009 09:38:57 +0000]
microblaze: Add missing FILE tag to MAINTAINERS

Signed-off-by: Michal Simek <monstr@monstr.eu>

10 years agolockdep: warn about lockdep disabling after kernel taint, fix
Ingo Molnar [Tue, 14 Apr 2009 09:03:12 +0000]
lockdep: warn about lockdep disabling after kernel taint, fix

Impact: build fix for Sparc and s390

Stephen Rothwell reported that the Sparc build broke:

 In file included from kernel/panic.c:12:
 include/linux/debug_locks.h: In function '__debug_locks_off':
 include/linux/debug_locks.h:15: error: implicit declaration of function 'xchg'

due to:

 9eeba61: lockdep: warn about lockdep disabling after kernel taint

There is some inconsistency between architectures about where exactly
xchg() is defined.

The traditional place is in system.h but the more logical point for it
is in atomic.h - where most architectures (especially new ones) have
it defined. These architecture also still offer it via system.h.

Some, such as Sparc or s390 only have it in asm/system.h and not available
via asm/atomic.h at all.

Use the widest set of headers in debug_locks.h and also include asm/system.h.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <20090414144317.026498df.sfr@canb.auug.org.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agomicroblaze: remove duplicated #include's
Huang Weiyi [Mon, 13 Apr 2009 22:56:15 +0000]
microblaze: remove duplicated #include's

Remove duplicated #include's in
  arch/microblaze/include/asm/io.h
  arch/microblaze/kernel/prom.c
  arch/microblaze/kernel/ptrace.c
  arch/microblaze/kernel/signal.c
  arch/microblaze/kernel/sys_microblaze.c

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>

10 years agomicroblaze: struct device - replace bus_id with dev_name()
Michal Simek [Tue, 14 Apr 2009 07:38:06 +0000]
microblaze: struct device - replace bus_id with dev_name()

Signed-off-by: Michal Simek <monstr@monstr.eu>

10 years agomicroblaze: Simplify copy_thread()
Michal Simek [Tue, 14 Apr 2009 07:18:19 +0000]
microblaze: Simplify copy_thread()

Removing nr parameter from copy_tread function
commit 6f2c55b843836d26528c56a0968689accaedbc67

Signed-off-by: Michal Simek <monstr@monstr.eu>

10 years agomicroblaze: Add TIMESTAMPING constants to socket.h
Michal Simek [Tue, 14 Apr 2009 07:16:01 +0000]
microblaze: Add TIMESTAMPING constants to socket.h

This changes was introduce with
commit: cb9eff097831007afb30d64373f29d99825d0068

net: new user space API for time stamping of incoming and outgoing packets

Signed-off-by: Michal Simek <monstr@monstr.eu>

10 years agomicroblaze: Add missing empty ftrace.h file
Michal Simek [Tue, 14 Apr 2009 06:37:30 +0000]
microblaze: Add missing empty ftrace.h file

Signed-off-by: Michal Simek <monstr@monstr.eu>

10 years agomicroblaze: Fix problem with removing zero length files
Michal Simek [Mon, 13 Apr 2009 18:51:22 +0000]
microblaze: Fix problem with removing zero length files

Adding one new line was recommended solution.
Test with make distclean

Tested-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>

10 years agosh: Add in PCI bus for DMA API debugging.
Paul Mundt [Tue, 14 Apr 2009 06:23:40 +0000]
sh: Add in PCI bus for DMA API debugging.

This adds in the pci_bus_type for DMA API debug.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

10 years agosh: Pre-allocate a reasonable number of DMA debug entries.
Paul Mundt [Tue, 14 Apr 2009 06:22:15 +0000]
sh: Pre-allocate a reasonable number of DMA debug entries.

This prevents the DMA API debugging from running out of entries right
away on boot. Defines 4096 entries by default, which while a bit on the
heavy side, ought to leave enough breathing room for some time.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

10 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris...
Linus Torvalds [Tue, 14 Apr 2009 01:16:09 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
  tomoyo: version bump to 2.2.0.
  tomoyo: add Documentation/tomoyo.txt

10 years agoFix quilt merge error in acpi-cpufreq.c
Linus Torvalds [Tue, 14 Apr 2009 01:09:20 +0000]
Fix quilt merge error in acpi-cpufreq.c

We ended up incorrectly using '&cur' instead of '&readin' in the
work_on_cpu() -> smp_call_function_single() transformation in commit
01599fca6758d2cd133e78f87426fc851c9ea725 ("cpufreq: use
smp_call_function_[single|many]() in acpi-cpufreq.c").

Andrew explains:
 "OK, the acpi tree went and had conflicting changes merged into it after
  I'd written the patch and it appears that I incorrectly reverted part
  of 18b2646fe3babeb40b34a0c1751e0bf5adfdc64c while fixing the resulting
  rejects.

  Switching it to `readin' looks correct."

Acked-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agotomoyo: version bump to 2.2.0.
Tetsuo Handa [Wed, 8 Apr 2009 13:31:28 +0000]
tomoyo: version bump to 2.2.0.

Signed-off-by: Kentaro Takeda <takedakn@nttdata.co.jp>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Toshiharu Harada <haradats@nttdata.co.jp>
Signed-off-by: James Morris <jmorris@namei.org>

10 years agotomoyo: add Documentation/tomoyo.txt
Tetsuo Handa [Mon, 13 Apr 2009 02:04:19 +0000]
tomoyo: add Documentation/tomoyo.txt

Signed-off-by: Kentaro Takeda <takedakn@nttdata.co.jp>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Toshiharu Harada <haradats@nttdata.co.jp>
Signed-off-by: James Morris <jmorris@namei.org>

10 years agoMerge branch 'for-rc1/xen/core' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Mon, 13 Apr 2009 22:30:20 +0000]
Merge branch 'for-rc1/xen/core' of git://git./linux/kernel/git/jeremy/xen

* 'for-rc1/xen/core' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen:
  xen: add FIX_TEXT_POKE to fixmap
  xen: honour VCPU availability on boot
  xen: clean up gate trap/interrupt constants
  xen: set _PAGE_NX in __supported_pte_mask before pagetable construction
  xen: resume interrupts before system devices.
  xen/mmu: weaken flush_tlb_other test
  xen/mmu: some early pagetable cleanups
  Xen: Add virt_to_pfn helper function
  x86-64: remove PGE from must-have feature list
  xen: mask XSAVE from cpuid
  NULL noise: arch/x86/xen/smp.c
  xen: remove xen_load_gdt debug
  xen: make xen_load_gdt simpler
  xen: clean up xen_load_gdt
  xen: split construction of p2m mfn tables from registration
  xen: separate p2m allocation from setting
  xen: disable preempt for leave_lazy_mmu

10 years agosh: sh7786: modify usb setup timeout judgment bug.
Kuninori Morimoto [Fri, 10 Apr 2009 00:54:07 +0000]
sh: sh7786: modify usb setup timeout judgment bug.

This corrects a race with the PHY RST bit not being set properly if the
PLL status changes right before timeout. This resulted in it potentially
failing even if the device came up in time.

Special thanks to Mr. Juha Leppanen and Iwamatsu-san for reporting this
out and reviewing it.

Reported-by: Juha Leppanen <juha_motorsportcom@luukku.com>
Reviewed-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Tested-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

10 years agoedac: use to_delayed_work()
Jean Delvare [Mon, 13 Apr 2009 21:40:21 +0000]
edac: use to_delayed_work()

The edac-core driver includes code which assumes that the work_struct
which is included in every delayed_work is the first member of that
structure.  This is currently the case but might change in the future, so
use to_delayed_work() instead, which doesn't make such an assumption.

linux-2.6.30-rc1 has the to_delayed_work() function that will allow this
patch to work

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoedac: fix local pci_write_bits32
Jeff Haran [Mon, 13 Apr 2009 21:40:20 +0000]
edac: fix local pci_write_bits32

Fix the edac local pci_write_bits32 to properly note the 'escape' mask if
all ones in a 32-bit word.

Currently no consumer of this function uses that mask, so there is no
danger to existing code.

Signed-off-by: Jeff Haran <jharan@Brocade.COM>
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agosgi-xpc: clean up numerous globals
Robin Holt [Mon, 13 Apr 2009 21:40:19 +0000]
sgi-xpc: clean up numerous globals

Introduce xpc_arch_ops and eliminate numerous individual global definitions.

Signed-off-by: Robin Holt <holt@sgi.com>
Cc: Dean Nelson <dcn@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agosgi-xpc: implement opencomplete messaging
Robin Holt [Mon, 13 Apr 2009 21:40:19 +0000]
sgi-xpc: implement opencomplete messaging

sgi-xpc has a window of failure where an open message can be sent and a
subsequent data message can get lost.  We have added a new message
(opencomplete) which closes that window.

Signed-off-by: Robin Holt <holt@sgi.com>
Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agosgi-xpc: prevent false heartbeat failures
Robin Holt [Mon, 13 Apr 2009 21:40:18 +0000]
sgi-xpc: prevent false heartbeat failures

The heartbeat timeout functionality in sgi-xpc is currently not trained to
the connection time.  If a connection is made and the code is in the last
polling window prior to doing a timeout, the next polling window will see
the heartbeat as unchanged and initiate a no-heartbeat disconnect.

Signed-off-by: Robin Holt <holt@sgi.com>
Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agosgi-xpc: update SGI XP/XPC/XPNET maintainer
Robin Holt [Mon, 13 Apr 2009 21:40:17 +0000]
sgi-xpc: update SGI XP/XPC/XPNET maintainer

Dean has moved on to other work.  His responsibilities for XP/XPC/XPNET
have been handed to me.

Signed-off-by: Robin Holt <holt@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agodoc: use correct debugfs mountpoint
Shen Feng [Mon, 13 Apr 2009 21:40:16 +0000]
doc: use correct debugfs mountpoint

Use the default mountpoint of debugfs in the pktcdvd ABI.

Signed-off-by: Shen Feng <shen@cn.fujitsu.com>
Cc: <balagi@justmail.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agomemcg: fix documentation
Bharata B Rao [Mon, 13 Apr 2009 21:40:15 +0000]
memcg: fix documentation

The description about various statistics from memory.stat is not accurate
and confusing at times.

Correct this along with a few other minor cleanups.

Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoReplace all DMA_nBIT_MASK macro with DMA_BIT_MASK(n)
Yang Hongyang [Mon, 13 Apr 2009 21:40:14 +0000]
Replace all DMA_nBIT_MASK macro with DMA_BIT_MASK(n)

This is the second go through of the old DMA_nBIT_MASK macro,and there're not
so many of them left,so I put them into one patch.I hope this is the last round.
After this the definition of the old DMA_nBIT_MASK macro could be removed.

Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Tony Lindgren <tony@atomide.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Greg KH <greg@kroah.com>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoext2: fix data corruption for racing writes
Jan Kara [Mon, 13 Apr 2009 21:40:14 +0000]
ext2: fix data corruption for racing writes

If two writers allocating blocks to file race with each other (e.g.
because writepages races with ordinary write or two writepages race with
each other), ext2_getblock() can be called on the same inode in parallel.
Before we are going to allocate new blocks, we have to recheck the block
chain we have obtained so far without holding truncate_mutex.  Otherwise
we could overwrite the indirect block pointer set by the other writer
leading to data loss.

The below test program by Ying is able to reproduce the data loss with ext2
on in BRD in a few minutes if the machine is under memory pressure:

long kMemSize  = 50 << 20;
int kPageSize = 4096;

int main(int argc, char **argv) {
int status;
int count = 0;
int i;
char *fname = "/mnt/test.mmap";
char *mem;
unlink(fname);
int fd = open(fname, O_CREAT | O_EXCL | O_RDWR, 0600);
status = ftruncate(fd, kMemSize);
mem = mmap(0, kMemSize, PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0);
// Fill the memory with 1s.
memset(mem, 1, kMemSize);
sleep(2);
for (i = 0; i < kMemSize; i++) {
int byte_good = mem[i] != 0;
if (!byte_good && ((i % kPageSize) == 0)) {
//printf("%d ", i / kPageSize);
count++;
}
}
munmap(mem, kMemSize);
close(fd);
unlink(fname);

if (count > 0) {
printf("Running %d bad page\n", count);
return 1;
}
return 0;
}

Cc: Ying Han <yinghan@google.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Mingming Cao <cmm@us.ibm.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoshmem: respect MAX_LFS_FILESIZE
Hugh Dickins [Mon, 13 Apr 2009 21:40:12 +0000]
shmem: respect MAX_LFS_FILESIZE

SHMEM_MAX_BYTES was derived from the maximum size of its triple-indirect
swap vector, forgetting to take the MAX_LFS_FILESIZE limit into account.
Never mind 256kB pages, even 8kB pages on 32-bit kernels allowed files to
grow slightly bigger than that supposed maximum.

Fix this by using the min of both (at build time not run time).  And it
happens that this calculation is good as far as 8MB pages on 32-bit or
16MB pages on 64-bit: though SHMSWP_MAX_INDEX gets truncated before that,
it's truncated to such large numbers that we don't need to care.

[akpm@linux-foundation.org: it needs pagemap.h]
[akpm@linux-foundation.org: fix sparc64 min() warnings]
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: Yuri Tikhonov <yur@emcraft.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoshmem: fix division by zero
Yuri Tikhonov [Mon, 13 Apr 2009 21:40:11 +0000]
shmem: fix division by zero

Fix a division by zero which we have in shmem_truncate_range() and
shmem_unuse_inode() when using big PAGE_SIZE values (e.g.  256kB on
ppc44x).

With 256kB PAGE_SIZE, the ENTRIES_PER_PAGEPAGE constant becomes too large
(0x1.0000.0000) on a 32-bit kernel, so this patch just changes its type
from 'unsigned long' to 'unsigned long long'.

Hugh: reverted its unsigned long longs in shmem_truncate_range() and
shmem_getpage(): the pagecache index cannot be more than an unsigned long,
so the divisions by zero occurred in unreached code.  It's a pity we need
any ULL arithmetic here, but I found no pretty way to avoid it.

Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agointelfb: support i854
Stefan Husemann [Mon, 13 Apr 2009 21:40:10 +0000]
intelfb: support i854

Support the Intel 854 Chipset in fbdev.

We test and use the patch on a Thomson IP1101 IPTV-Box.  On the VGA-Port
we get a normal signal.

Here is the link to the Mambux-Project: http://www.mambux.de

Cc: Keith Packard <keithp@keithp.com>
Cc: Dave Airlie <airlied@linux.ie>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Stefan Husemann <shusemann@googlemail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agomm: add documentation describing what tsk->active_mm means vs tsk->mm
Michael Ellerman [Mon, 13 Apr 2009 21:40:09 +0000]
mm: add documentation describing what tsk->active_mm means vs tsk->mm

I'm sure everyone knows this, but I didn't, so I googled it, and found a
nice explanation from Linus.  Might be worth sticking in Documentation.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agomemcg: remove warning when CONFIG_DEBUG_VM=n
KAMEZAWA Hiroyuki [Mon, 13 Apr 2009 21:40:08 +0000]
memcg: remove warning when CONFIG_DEBUG_VM=n

mm/memcontrol.c:318: warning: `mem_cgroup_is_obsolete' defined but not used

[akpm@linux-foundation.org: simplify as suggested by Balbir]
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agokernel/sys.c: clean up sys_shutdown exit path
Andi Kleen [Mon, 13 Apr 2009 21:40:08 +0000]
kernel/sys.c: clean up sys_shutdown exit path

Impact: cleanup, fix

Clean up sys_shutdown() exit path.  Factor out common code.  Return
correct error code instead of always 0 on failure.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoat25: make input buffers of at25_*write() const
Geert Uytterhoeven [Mon, 13 Apr 2009 21:40:07 +0000]
at25: make input buffers of at25_*write() const

| drivers/misc/eeprom/at25.c:358: warning: assignment from incompatible pointer type

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoat24: make input buffers of at24_*write() const
Geert Uytterhoeven [Mon, 13 Apr 2009 21:40:06 +0000]
at24: make input buffers of at24_*write() const

| drivers/misc/eeprom/at24.c:508: warning: assignment from incompatible pointer type

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agojbd: update locking coments
Jan Kara [Mon, 13 Apr 2009 21:40:06 +0000]
jbd: update locking coments

Update information about locking in JBD revoke code.

Reported-by: Lin Tan <tammy000@gmail.com>.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agomm: document get_user_pages_fast()
Andy Grover [Mon, 13 Apr 2009 21:40:05 +0000]
mm: document get_user_pages_fast()

While better than get_user_pages(), the usage of gupf(), especially the
return values and the fact that it can potentially only partially pin the
range, warranted some documentation.

Signed-off-by: Andy Grover <andy.grover@oracle.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoinitramfs: fix initramfs to work with hardlinked init
Randy Robertson [Mon, 13 Apr 2009 21:40:04 +0000]
initramfs: fix initramfs to work with hardlinked init

Change cb6ff208076b5f434db1b8c983429269d719cef5 ("NOMMU: Support XIP on
initramfs") seems to have broken booting from initramfs with /sbin/init
being a hardlink.

It seems like the logic required for XIP on nommu, i.e.  ftruncate to
reported cpio header file size (body_len) is broken for hardlinks, which
have a reported size of 0, and the truncate thus nukes the contents of the
file (in my case busybox), making boot impossible and ending with runaway
loop modprobe binfmt-0000 - and of course 0000 is not a valid binary
format.

My fix is to only call ftruncate if size is non-zero which fixes things
for me, but I'm not certain whether this will break XIP for those files on
nommu systems, although I would guess not.

Signed-off-by: Randy Robertson <rmrobert@vmware.com>
Acked-by: David Howells <dhowells@redhat.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoptrace: fix exit_ptrace() vs ptrace_traceme() race
Oleg Nesterov [Mon, 13 Apr 2009 21:40:03 +0000]
ptrace: fix exit_ptrace() vs ptrace_traceme() race

Pointed out by Roland.  The bug was recently introduced by me in
"forget_original_parent: split out the un-ptrace part", commit
39c626ae47c469abdfd30c6e42eff884931380d6.

Since that patch we have a window after exit_ptrace() drops tasklist and
before forget_original_parent() takes it again.  In this window the child
can do ptrace(PTRACE_TRACEME) and nobody can untrace this child after
that.

Change ptrace_traceme() to not attach to the exiting ->real_parent.  We
don't report the error in this case, we pretend we attach right before
->real_parent calls exit_ptrace() which should untrace us anyway.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoMAINTAINERS: bluesmoke-devel list is moderated for non-subscribers
Jean Delvare [Mon, 13 Apr 2009 21:40:02 +0000]
MAINTAINERS: bluesmoke-devel list is moderated for non-subscribers

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agomm: reformat the Unevictable-LRU documentation
David Howells [Mon, 13 Apr 2009 21:40:01 +0000]
mm: reformat the Unevictable-LRU documentation

Do a bit of reformatting on the Unevictable-LRU documentation.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agomm: point the UNEVICTABLE_LRU config option at the documentation
David Howells [Mon, 13 Apr 2009 21:40:01 +0000]
mm: point the UNEVICTABLE_LRU config option at the documentation

Point the UNEVICTABLE_LRU config option at the documentation describing
the option.

Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agosysrq: remove duplicated #include
Huang Weiyi [Mon, 13 Apr 2009 21:40:00 +0000]
sysrq: remove duplicated #include

Remove duplicated #include in drivers/char/sysrq.c.

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoinclude/video/cyblafb.h: remove it, it's unused
Joe Perches [Mon, 13 Apr 2009 21:39:59 +0000]
include/video/cyblafb.h: remove it, it's unused

commit ddb53d48da5b0e691f35e703ac29118747f86c99 ("fbdev: remove cyblafb
driver") removed drivers/video/cyblafb.c, but not its .h file

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: "Jani Monoses" <jani@ubuntu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agores_counter: update documentation
Andrea Righi [Mon, 13 Apr 2009 21:39:58 +0000]
res_counter: update documentation

After the introduction of resource counters hierarchies
(28dbc4b6a01fb579a9441c7b81e3d3413dc452df) the prototypes of
res_counter_init() and res_counter_charge() have been changed.

Keep the documentation consistent with the actual function prototypes.

Signed-off-by: Andrea Righi <righi.andrea@gmail.com>
Cc: Paul Menage <menage@google.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agospi: spi_write_then_read() bugfixes
David Brownell [Mon, 13 Apr 2009 21:39:57 +0000]
spi: spi_write_then_read() bugfixes

The "simplify spi_write_then_read()" patch included two regressions from
the 2.6.27 behaviors:

 - The data it wrote out during the (full duplex) read side
   of the transfer was not zeroed.

 - It fails completely on half duplex hardware, such as
   Microwire and most "3-wire" SPI variants.

So, revert that patch.  A revised version should be submitted at some
point, which can get the speedup on standard hardware (full duplex)
without breaking on less-capable half-duplex stuff.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: <stable@kernel.org> [2.6.28.x, 2.6.29.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoasm-generic/siginfo.h: update NSIGTRAP definition
Andi Kleen [Mon, 13 Apr 2009 21:39:56 +0000]
asm-generic/siginfo.h: update NSIGTRAP definition

Impact: (nearly) trivial

The patch

commit da654b74bda14c45a7d98c731bf3c1a43b6b74e2
Author: Srinivasa Ds <srinivasa@in.ibm.com>
Date:   Tue Sep 23 15:23:52 2008 +0530

    signals: demultiplexing SIGTRAP signal

forgot to update the NSIGTRAP define in asm-generic/siginfo.h to the new
number of sigtrap subcodes.  Nothing in the tree seems to use it, but
presumably something in user space might.  So update it.

Cc: Srinivasa Ds <srinivasa@in.ibm.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agocirrusfb: do not allow unsupported pixel depth
Krzysztof Helt [Mon, 13 Apr 2009 21:39:55 +0000]
cirrusfb: do not allow unsupported pixel depth

Do not allow modes with unsupported pixel depth.  Otherwise, one can hang
a computer by setting incorrect value with fbset command.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agofilemap: fix kernel-doc warnings
Randy Dunlap [Mon, 13 Apr 2009 21:39:54 +0000]
filemap: fix kernel-doc warnings

Fix filemap.c kernel-doc warnings:

Warning(mm/filemap.c:575): No description found for parameter 'page'
Warning(mm/filemap.c:575): No description found for parameter 'waiter'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoinclude/linux/fiemap.h: include types.h now that it's exported
Eric Sandeen [Mon, 13 Apr 2009 21:39:54 +0000]
include/linux/fiemap.h: include types.h now that it's exported

Include <linux/types.h> in fiemap.h.  Sam Ravnborg pointed out that this
was missing in this newly-exported header which uses the __u32 and __u64
types.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agodrivers/video/aty/radeon_base.c: fix typo in comment
Paul Menzel [Mon, 13 Apr 2009 21:39:53 +0000]
drivers/video/aty/radeon_base.c: fix typo in comment

Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agosisfb: fix color component length for pseudocolor modes
Michal Januszewski [Mon, 13 Apr 2009 21:39:52 +0000]
sisfb: fix color component length for pseudocolor modes

sisfb incorrectly sets the length of the color fields to 6 bits
for PSEUDOCOLOR modes, even though 8 bits are always used per pixel.
Fix this by setting the length to 8.

Signed-off-by: Michal Januszewski <spock@gentoo.org>
Cc: Thomas Winischhofer <thomas@winischhofer.net>
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agosa1100fb: fix color component length for pseudocolor modes
Michal Januszewski [Mon, 13 Apr 2009 21:39:51 +0000]
sa1100fb: fix color component length for pseudocolor modes

sa1100fb incorrectly sets the length of the color fields to 8 bits for
PSEUDOCOLOR modes for which only 4 bits are used per pixel.  Fix this by
setting the length to 4 bits for these modes.

Signed-off-by: Michal Januszewski <spock@gentoo.org>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agos3fb: fix color component length for pseudocolor modes
Michal Januszewski [Mon, 13 Apr 2009 21:39:49 +0000]
s3fb: fix color component length for pseudocolor modes

s3fb incorrectly sets the length of the color fields to 6 bits for
PSEUDOCOLOR modes, even though 8 or 4 bits are used per pixel.  Fix this
by setting the length to 8 or 4, respectively.

Signed-off-by: Michal Januszewski <spock@gentoo.org>
Acked-by: Ondrej Zajicek <santiago@crfreenet.org>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agonamespaces: move get_mq() inside #ifdef CONFIG_SYSCTL
Geert Uytterhoeven [Mon, 13 Apr 2009 21:39:48 +0000]
namespaces: move get_mq() inside #ifdef CONFIG_SYSCTL

| ipc/mq_sysctl.c:26: warning: 'get_mq' defined but not used

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoaio: remove INIT_KIOCTX
Alexey Dobriyan [Mon, 13 Apr 2009 21:39:47 +0000]
aio: remove INIT_KIOCTX

Unused after 20dcae32439384b6863c626bb3b2a09bed65b33e aka
"[PATCH] aio: remove kioctx from mm_struct".

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agohfs: fix memory leak when unmounting
Dave Anderson [Mon, 13 Apr 2009 21:39:46 +0000]
hfs: fix memory leak when unmounting

When an HFS filesystem is unmounted, it leaks a 2-page bitmap.  Also,
under extreme memory pressure, it's possible that hfs_releasepage() may
use a tree pointer that has not been initialized, and if so, the release
request should just be rejected.

[akpm@linux-foundation.org: free_pages(0) is legal, remove obvious comment]
Signed-off-by: Dave Anderson <anderson@redhat.com>
Tested-by: Eugene Teo <eugeneteo@kernel.sg>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agohwmon: sht15 humidity sensor driver
Jonathan Cameron [Mon, 13 Apr 2009 21:39:45 +0000]
hwmon: sht15 humidity sensor driver

Data sheet at:
http://www.sensirion.ch/en/pdf/product_information/Datasheet-humidity-sensor-SHT1x.pdf

These sensors communicate over a 2 wire bus running a device specific
protocol.  The complexity of the driver is mainly due to handling the
substantial delays between requesting a reading and the device pulling the
data line low to indicate that the data is available.  This is handled by
an interrupt that is disabled under all other conditions.

I wasn't terribly clear on the best way to handle this, so comments on
that aspect would be particularly welcome!

Interpretation of the temperature depends on knowing the supply voltage.
If configured in a board config as a regulator consumer this is obtained
from the regulator subsystem.  If not it should be provided in the
platform data.

I've placed this driver in the hwmon subsystem as it is definitely a
device that may be used for hardware monitoring and with it's relatively
slow response times (up to 120 millisecs to get a reading) a caching
strategy certainly seems to make sense!

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoefifb: exit if framebuffer address is invalid
Matthew Garrett [Mon, 13 Apr 2009 21:39:44 +0000]
efifb: exit if framebuffer address is invalid

efifb will attempt to ioremap a framebuffer even if its starting address
is 0, failing and causing an ugly backtrace in the process.  Exit before
probing if this is the case.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Acked-by: Peter Jones <pjones@redhat.com>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agouvesafb: fix color component length for pseudocolor modes
Michal Januszewski [Mon, 13 Apr 2009 21:39:43 +0000]
uvesafb: fix color component length for pseudocolor modes

uvesafb incorrectly sets the length of the color fields to 6 bits for
PSEUDOCOLOR modes, even though 8 bits are always used per pixel.  Fix this
by setting the length to 8.

The switch of the DAC width from the default 6 bits to 8 bits is retained
and tracked internally in the driver, but never exposed to userspace.

Signed-off-by: Michal Januszewski <spock@gentoo.org>
Acked-by: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: <syrjala@sci.fi>
Cc: Geert Uytterhoeven <geert.uytterhoeven@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>