12 years ago[PATCH] sysctl: ax25: remove unnecessary insert_at_head flag
Eric W. Biederman [Wed, 14 Feb 2007 08:33:30 +0000]
[PATCH] sysctl: ax25: remove unnecessary insert_at_head flag

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years ago[PATCH] sysctl: dccp: remove unnecessary insert_at_head flag
Eric W. Biederman [Wed, 14 Feb 2007 08:33:29 +0000]
[PATCH] sysctl: dccp: remove unnecessary insert_at_head flag

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Arnaldo Carvalho de Melo <acme@conectiva.com.br>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years ago[PATCH] sysctl: decnet: remove unnecessary insert_at_head flag
Eric W. Biederman [Wed, 14 Feb 2007 08:33:28 +0000]
[PATCH] sysctl: decnet: remove unnecessary insert_at_head flag

The sysctl numbers used are unique so setting the insert_at_head flag does not
succeed in overriding any sysctls, and is just confusing because it doesn't.
Clear the flag.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Patrick Caulfield <patrick@tykepenguin.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years ago[PATCH] sysctl: ipx: remove unnecessary insert_at_head flag
Eric W. Biederman [Wed, 14 Feb 2007 08:33:27 +0000]
[PATCH] sysctl: ipx: remove unnecessary insert_at_head flag

The sysctl numbers used are unique so setting the insert_at_head flag servers
no semantic purpose and is just confusing.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Arnaldo Carvalho de Melo <acme@conectiva.com.br>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years ago[PATCH] sysctl: llc: remove unnecessary insert_at_head flag
Eric W. Biederman [Wed, 14 Feb 2007 08:33:26 +0000]
[PATCH] sysctl: llc: remove unnecessary insert_at_head flag

The sysctl numbers used are unique so setting the insert_at_head flag serves
no semantis purpose, and is just confusing.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Arnaldo Carvalho de Melo <acme@conectiva.com.br>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years ago[PATCH] sysctl: netrom: remove unnecessary insert_at_head flag
Eric W. Biederman [Wed, 14 Feb 2007 08:33:26 +0000]
[PATCH] sysctl: netrom: remove unnecessary insert_at_head flag

The sysctl numbers used are unique so setting the insert_at_head flag serves
no semantic purpose, so it is just confusing.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years ago[PATCH] sysctl: rose: remove unnecessary insert_at_head flag
Eric W. Biederman [Wed, 14 Feb 2007 08:33:25 +0000]
[PATCH] sysctl: rose: remove unnecessary insert_at_head flag

The sysctl numbers used are unique so setting the insert_at_head flag serves
no semantic purpose.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years ago[PATCH] sysctl: sunrpc: don't unnecessarily set ctl_table->de
Eric W. Biederman [Wed, 14 Feb 2007 08:33:24 +0000]
[PATCH] sysctl: sunrpc: don't unnecessarily set ctl_table->de

We don't need this to prevent module unload races so remove the unnecessary
code.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years ago[PATCH] sysctl: sunrpc: remove unnecessary insert_at_head flag
Eric W. Biederman [Wed, 14 Feb 2007 08:33:23 +0000]
[PATCH] sysctl: sunrpc: remove unnecessary insert_at_head flag

Because the sunrpc sysctls don't conflict with any other sysctls the setting
the insert at head flag to register_sysctl has no semantic meaning.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years ago[PATCH] sysctl: move CTL_SUNRPC to sysctl.h where it belongs
Eric W. Biederman [Wed, 14 Feb 2007 08:33:22 +0000]
[PATCH] sysctl: move CTL_SUNRPC to sysctl.h where it belongs

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years ago[PATCH] sysctl: x25: remove unnecessary insert_at_head from register_sysctl_table
Eric W. Biederman [Wed, 14 Feb 2007 08:33:21 +0000]
[PATCH] sysctl: x25: remove unnecessary insert_at_head from register_sysctl_table

There has not been much maintenance on sysctl in years, and as a result is
there is a lot to do to allow future interesting work to happen, and being
ambitious I'm trying to do it all at once :)

The patches in this series fall into several general categories.

- Removal of useless attempts to override the standard sysctls

- Registers of sysctl numbers in sysctl.h so someone else does not use
  the magic number and conflict.

- C99 conversions so it becomes possible to change the layout of
  struct ctl_table without breaking everything.

- Removal of useless claims of module ownership, in the proc dir entries

- Removal of sys_sysctl support where people had used conflicting sysctl
  numbers. Trying to break glibc or other applications by changing the
  ABI is not cool.  9 instances of this in the kernel seems a little
  extreme.

- General enhancements when I got the junk I could see out.

This patch:

Since x25 uses unique binary numbers inserting yourself at the head of the
search list for sysctls so you can override already registered sysctls is
pointless.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years ago[PATCH] scheduled removal of SA_XXX interrupt flags: ata fix
Andrew Morton [Wed, 14 Feb 2007 08:33:20 +0000]
[PATCH] scheduled removal of SA_XXX interrupt flags: ata fix

SA_SHIRQ is going away.

Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years ago[PATCH] Scheduled removal of SA_xxx interrupt flags fixups 2
Thomas Gleixner [Wed, 14 Feb 2007 08:33:20 +0000]
[PATCH] Scheduled removal of SA_xxx interrupt flags fixups 2

The obsolete SA_xxx interrupt flags have been used despite the scheduled
removal.  Fixup the remaining users in -mm.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years ago[PATCH] Scheduled removal of SA_xxx interrupt flags fixups
Thomas Gleixner [Wed, 14 Feb 2007 08:33:16 +0000]
[PATCH] Scheduled removal of SA_xxx interrupt flags fixups

The obsolete SA_xxx interrupt flags have been used despite the scheduled
removal.  Fixup the remaining users.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Wim Van Sebroeck <wim@iguana.be>
Cc: Roland Dreier <rolandd@cisco.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: Greg KH <greg@kroah.com>
Cc: Dave Airlie <airlied@linux.ie>
Cc: James Simmons <jsimmons@infradead.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years ago[PATCH] OSS: replace kmalloc()+memset() combos with kzalloc()
Robert P. J. Day [Wed, 14 Feb 2007 08:33:16 +0000]
[PATCH] OSS: replace kmalloc()+memset() combos with kzalloc()

Replace kmalloc() + memset() pairs with the appropriate kzalloc() calls.

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years ago[PATCH] remove many unneeded #includes of sched.h
Tim Schmielau [Wed, 14 Feb 2007 08:33:14 +0000]
[PATCH] remove many unneeded #includes of sched.h

After Al Viro (finally) succeeded in removing the sched.h #include in module.h
recently, it makes sense again to remove other superfluous sched.h includes.
There are quite a lot of files which include it but don't actually need
anything defined in there.  Presumably these includes were once needed for
macros that used to live in sched.h, but moved to other header files in the
course of cleaning it up.

To ease the pain, this time I did not fiddle with any header files and only
removed #includes from .c-files, which tend to cause less trouble.

Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha,
arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig,
allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all
configs in arch/arm/configs on arm.  I also checked that no new warnings were
introduced by the patch (actually, some warnings are removed that were emitted
by unnecessarily included header files).

Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years ago[PATCH] knfsd: allow the server to provide a gid list when using AUTH_UNIX authentication
NeilBrown [Wed, 14 Feb 2007 08:33:13 +0000]
[PATCH] knfsd: allow the server to provide a gid list when using AUTH_UNIX authentication

AUTH_UNIX authentication (the standard with NFS) has a limit of 16 groups ids.
 This causes problems for people in more than 16 groups.

So allow the server to map a uid into a list of group ids based on local
knowledge rather depending on the (possibly truncated) list from the client.

If there is no process on the server responding to upcalls, the gidlist in the
request will still be used.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years ago[PATCH] knfsd: add some new fsid types
NeilBrown [Wed, 14 Feb 2007 08:33:12 +0000]
[PATCH] knfsd: add some new fsid types

Add support for using a filesystem UUID to identify and export point in the
filehandle.

For NFSv2, this UUID is xor-ed down to 4 or 8 bytes so that it doesn't take up
too much room.  For NFSv3+, we use the full 16 bytes, and possibly also a
64bit inode number for exports beneath the root of a filesystem.

When generating an fsid to return in 'stat' information, use the UUID (hashed
down to size) if it is available and a small 'fsid' was not specifically
provided.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years ago[PATCH] knfsd: tidy up choice of filesystem-identifier when creating a filehandle
NeilBrown [Wed, 14 Feb 2007 08:33:11 +0000]
[PATCH] knfsd: tidy up choice of filesystem-identifier when creating a filehandle

If we are using the same version/fsid as a current filehandle, then there is
no need to verify the the numbers are valid for this export, and they must be
(we used them to find this export).

This allows us to simplify the fsid selection code.

Also change "ref_fh_version" and "ref_fh_fsid_type" to "version" and
"fsid_type", as the important thing isn't that they are the version/type of
the reference filehandle, but they are the chosen type for the new filehandle.

And tidy up some indenting.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years ago[PATCH] knfsd: fix return value for writes to some files in 'nfsd' filesystem
NeilBrown [Wed, 14 Feb 2007 08:33:11 +0000]
[PATCH] knfsd: fix return value for writes to some files in 'nfsd' filesystem

Most files in the 'nfsd' filesystem are transactional.  When you write, a
reply is generated that can be read back only on the same 'file'.

If the reply has zero length, the 'write' will incorrectly return a value of
'0' instead of the length that was written.  This causes 'rpc.nfsd' to give an
annoying warning.

This patch fixes the test.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years ago[PATCH] SPI: atmel_spi driver
Haavard Skinnemoen [Wed, 14 Feb 2007 08:33:09 +0000]
[PATCH] SPI: atmel_spi driver

Driver for the Atmel on-chip SPI master controller.

Tested primarily on AVR32/AT32AP7000/ATSTK1000 using mtd_dataflash and the
jffs2 filesystem.  Should also work fine on various AT91 ARM-based chips
like AT91SAM926x and AT91RM9200.

Hardware documentation can be found in the AT32AP7000 data sheet, or its
AT91 siblings, which can be downloaded from

http://www.atmel.com/dyn/products/datasheets.asp?family_id=682

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years ago[PATCH] PNX8550 UART driver
Vitaly Wool [Wed, 14 Feb 2007 08:33:09 +0000]
[PATCH] PNX8550 UART driver

Add UART support for PNX8330/8550/8950 Philips MIPS-based SoCs.

Signed-off-by: Vitaly Wool <vitalywool@gmail.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years ago[PATCH] fix PNX8550 serial breakage
Vitaly Wool [Wed, 14 Feb 2007 08:33:08 +0000]
[PATCH] fix PNX8550 serial breakage

Fix the serial header breakage for the PNX8550 MIPS platform.

Signed-off-by: Vitaly Wool <vitalywool@gmail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years ago[PATCH] serial: replace kmalloc+memset with kzalloc
Burman Yan [Wed, 14 Feb 2007 08:33:07 +0000]
[PATCH] serial: replace kmalloc+memset with kzalloc

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years ago[PATCH] serial: make sure UART is powered up when dumping MCTRL status
George G. Davis [Wed, 14 Feb 2007 08:33:06 +0000]
[PATCH] serial: make sure UART is powered up when dumping MCTRL status

Since serial devices are powered down when not in use and some of those
devices cannot be accessed when powered down, we need to enable power
around calls to get_mcrtl() when dumping port state via uart_line_info().
This resolves hangs observed on some machines while reading serial device
registers when a port is powered off.

Signed-off-by: George G. Davis <gdavis@mvista.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years ago[PATCH] serial: trivial code flow simplification
Bjorn Helgaas [Wed, 14 Feb 2007 08:33:05 +0000]
[PATCH] serial: trivial code flow simplification

Return failure immediately, so we don't have to test it twice.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Adam Belay <ambx1@neo.rr.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years ago[PATCH] 8250 UART backup timer
Alex Williamson [Wed, 14 Feb 2007 08:33:04 +0000]
[PATCH] 8250 UART backup timer

The patch below works around a minor bug found in the UART of the remote
management card used in many HP ia64 and parisc servers (aka the Diva
UARTs).  The problem is that the UART does not reassert the THRE interrupt
if it has been previously cleared and the IIR THRI bit is re-enabled.  This
can produce a very annoying failure mode when used as a serial console,
allowing a boot/reboot to hang indefinitely until an RX interrupt kicks it
into working again (ie.  an unattended reboot could stall).

To solve this problem, a backup timer is introduced that runs alongside the
standard interrupt driven mechanism.  This timer wakes up periodically,
checks for a hang condition and gets characters moving again.  This backup
mechanism is only enabled if the UART is detected as having this problem,
so systems without these UARTs will have no additional overhead.

This version of the patch incorporates previous comments from Pavel and
removes races in the bug detection code.  The test is now done before the
irq linking to prevent races with interrupt handler clearing the THRE
interrupt.  Short delays and syncs are also added to ensure the device is
able to update register state before the result is tested.

Aristeu says:

  this was tested on the following HP machines and solved the problem:
  rx2600, rx2620, rx1600 and rx1620s.

hpa says:

  I have seen this same bug in soft UART IP from "a major vendor."

Signed-off-by: Alex Williamson <alex.williamson@hp.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Acked-by: Aristeu Sergio Rozanski Filho <aris@cathedrallabs.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years ago[PATCH] qconf: hide empty list items
Cyrill V. Gorcunov [Wed, 14 Feb 2007 08:33:03 +0000]
[PATCH] qconf: hide empty list items

This patch fixes showing empty config list items if "Option/Show All
Options" is turned on.  For example empty items appears on list of 'Block
Layer' menu.

Signed-off-by: Cyrill V. Gorcunov <gorcunov@gmail.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Oleg Verych <olecom@flower.upol.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years ago[PATCH] new toplevel target: headers_check_all
Mike Frysinger [Wed, 14 Feb 2007 08:33:02 +0000]
[PATCH] new toplevel target: headers_check_all

Add new headers_check_all target for checking all arches in one go.

Useful for distros (and people with too much time on their hands) that support
a ton of architectures, headers_check_all is to headers_check as
headers_install_all is to headers_install

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years ago[PATCH] Kbuild: Remove references to deprecated "prepare-all" target from Makefile
Robert P. J. Day [Wed, 14 Feb 2007 08:33:01 +0000]
[PATCH] Kbuild: Remove references to deprecated "prepare-all" target from Makefile

Remove references to the deprecated "make prepare-all" target from the
top-level Makefile; use just "make prepare" instead.

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Oleg Verych <olecom@flower.upol.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years ago[PATCH] qconf: Back button behaviour normalization
Cyrill V. Gorcunov [Wed, 14 Feb 2007 08:33:00 +0000]
[PATCH] qconf: Back button behaviour normalization

Do "Back" button behaviour normalization so it is enabled starting from
second-level menu only.

Signed-off-by: Cyrill V. Gorcunov <gorcunov@gmail.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years ago[PATCH] qconf: fix showing help info on failed search
Cyrill V. Gorcunov [Wed, 14 Feb 2007 08:32:59 +0000]
[PATCH] qconf: fix showing help info on failed search

qconf does not clear help text in search window if previous search has been
failed.

Signed-off-by: Cyrill V. Gorcunov <gorcunov@mail.ru>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years ago[PATCH] qconf: relocate Search Command
Shlomi Fish [Wed, 14 Feb 2007 08:32:58 +0000]
[PATCH] qconf: relocate Search Command

Relocate the qconf search command to the "Edit"->"Find" menu option.

This is per the discussion on my qconf search dialog patch.

Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years ago[PATCH] qconf: immediately update integer and string values in xconfig display
Karsten Wiese [Wed, 14 Feb 2007 08:32:57 +0000]
[PATCH] qconf: immediately update integer and string values in xconfig display

In xconfig's display integer and string values are also shown as part of
the config item's descriptive text.

This patch updates the descriptive text, when the corresponding value has
been changed.  Fix for http://bugzilla.kernel.org/show_bug.cgi?id=7744

Take2 uses updateList() so config values dependending on the changed value
see the change.

Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years ago[PATCH] add .mailmap for proper git-shortlog output
Nicolas Pitre [Wed, 14 Feb 2007 08:32:56 +0000]
[PATCH] add .mailmap for proper git-shortlog output

This list was built into the git-shortlog tool and has been removed in the
latest version.  It should be maintained separately so this is what this
patch does.

A couple more entries were added to the original list as well.

Signed-off-by: Nicolas Pitre <nico@cam.org>
Acked-by: Junio C Hamano <junkio@cox.net>
Cc: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years ago[PATCH] Make mkcompile_h use LANG=C and LC_ALL=C for $CC -v
s situert [Wed, 14 Feb 2007 08:32:55 +0000]
[PATCH] Make mkcompile_h use LANG=C and LC_ALL=C for $CC -v

Fix a minor bug in mkcompile_h.  As one can see, the current locale is used
while getting the version of gcc.  This produces problems when a locale
other than C or en_US is used.  As an example, my /proc/version contains
Turkish characters in iso-8859-9 encoding.

This patch fixes this issue by making sure that the C locale is used to get
gcc's version.

Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years ago[PATCH] search a little harder for mkimage
Mike Frysinger [Wed, 14 Feb 2007 08:32:54 +0000]
[PATCH] search a little harder for mkimage

Check to see if `${CROSS_COMPILE}mkimage` exists and if not, fall back to
the standard `mkimage`

The Blackfin toolchain includes mkimage, but we dont want to namespace
collide with any of the user's system setup, so we prefix it with our
toolchain name.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Oleg Verych <olecom@flower.upol.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years ago[PATCH] ia64: fix noncoherent DMA API so devres builds
Roland Dreier [Wed, 14 Feb 2007 08:32:53 +0000]
[PATCH] ia64: fix noncoherent DMA API so devres builds

On ia64, drivers/base/dma-mapping.c doesn't build because it calls
dma_alloc_noncoherent() and dma_free_noncoherent(), which appear to be
terminally broken; the calls end up generating errors like

    drivers/base/dma-mapping.c: In function 'dmam_noncoherent_release':
    drivers/base/dma-mapping.c:32: error: 'struct ia64_machine_vector' has no member named 'platform_dma_free_coherent'

because the multiple levels of macro expansion in <asm/dma-mapping.h> and
<asm/machvec.h> end up turning a call to dma_free_noncoherent() into
ia64_mv.platform_dma_free_coherent (instead of the intended
ia64_mv.dma_free_coherent).

This patch fixes this by converting dma_{alloc,free}_noncoherent() into
inline functions that call the corresponding coherent functions, instead of
trying to do this with macros.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoMerge branch 'master' of /home/trondmy/kernel/linux-2.6/
Trond Myklebust [Wed, 14 Feb 2007 06:02:32 +0000]
Merge branch 'master' of /home/trondmy/kernel/linux-2.6/

12 years agoMerge branch 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband
Linus Torvalds [Wed, 14 Feb 2007 05:16:39 +0000]
Merge branch 'for-linus' of /linux/kernel/git/roland/infiniband

* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband:
  IB/mthca: Always fill MTTs from CPU
  IB/mthca: Merge MR and FMR space on 64-bit systems
  IB/mthca: Fix access to MTT and MPT tables on non-cache-coherent CPUs
  IB/mthca: Give reserved MTTs a separate cache line
  IB/mthca: Fix reserved MTTs calculation on mem-free HCAs
  RDMA/cxgb3: Add driver for Chelsio T3 RNIC
  IB: Remove redundant "_wq" from workqueue names
  RDMA/cma: Increment port number after close to avoid re-use
  IB/ehca: Fix memleak on module unloading
  IB/mthca: Work around gcc bug on sparc64
  IPoIB: Connected mode experimental support
  IB/core: Use ARRAY_SIZE macro for mandatory_table
  IB/mthca: Use correct structure size in call to memset()

12 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/sfrench/cifs-2.6
Linus Torvalds [Wed, 14 Feb 2007 05:15:42 +0000]
Merge /pub/scm/linux/kernel/git/sfrench/cifs-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  [CIFS] on reconnect to Samba - reset the unix capabilities
  [CIFS] Allow update of EOF on remote extend of file
  [CIFS] POSIX CIFS Extensions (continued) - POSIX Open
  [CIFS] Additional POSIX CIFS Extensions infolevels

12 years ago[CIFS] on reconnect to Samba - reset the unix capabilities
Steve French [Wed, 14 Feb 2007 04:42:51 +0000]
[CIFS] on reconnect to Samba - reset the unix capabilities

After temporary server or network failure and reconneciton, we were not
resending the unix capabilities via SetFSInfo - which confused Samba posix
byte range locking code.

Discovered by jra

Signed-off-by: Steve French <sfrench@us.ibm.com>

12 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Wed, 14 Feb 2007 02:17:26 +0000]
Merge /pub/scm/linux/kernel/git/davem/net-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [IPSEC]: Fix the address family to refer encap_family
  [IPSEC]: changing API of xfrm6_tunnel_register
  [IPSEC]: make sit use the xfrm4_tunnel_register
  [IPSEC]: Changing API of xfrm4_tunnel_register.
  [TCP]: Prevent pseudo garbage in SYN's advertized window
  [NET_SCHED]: sch_hfsc: replace ASSERT macro by WARN_ON
  [BRIDGE] br_if: Fix oops in port_carrier_check
  [NETFILTER]: Clear GSO bits for TCP reset packet
  [TG3]: Update copyright, version, and reldate.
  [TG3]: Add some tx timeout debug messages.
  [TG3]: Use constant for PHY register 0x1e.
  [TG3]: Power down 5704 serdes transceiver when shutting down.
  [TG3]: 5906 doesn't need to switch to slower clock.
  [TG3]: 5722/5756 don't need PHY jitter workaround.
  [TG3]: Use lower DMA watermark for 5703.
  [TG3]: Save MSI state before suspend.
  [XFRM]: Fix IPv4 tunnel mode decapsulation with IPV6=n
  [IPV6] HASHTABLES: Use appropriate seed for caluculating ehash index.

12 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/paulus/powerpc
Linus Torvalds [Wed, 14 Feb 2007 01:34:23 +0000]
Merge /pub/scm/linux/kernel/git/paulus/powerpc

* master.kernel.org:/pub/scm/linux/kernel/git/paulus/powerpc: (61 commits)
  [POWERPC] Use udbg_early_init() on ppc32
  [POWERPC] Open Firmware serial port driver
  [POWERPC] Move MPIC smp routines into mpic.c
  [POWERPC] Cleanup pseries kexec code
  [POWERPC] Cleanup pseries smp initialisation code
  [POWERPC] Consolidate pseries platform header files into pseries.h
  [POWERPC] 85xx: Drop use of SYNC macro in head_fsl_booke.S
  [POWERPC] cell: pm_rtas_activat_signals routine cleanup
  [POWERPC] cell: PPU Oprofile cleanup patch
  [POWERPC] spufs: avoid accessing kernel memory through mmapped /mem node
  [POWERPC] spu sched: static timeslicing for SCHED_RR contexts
  [POWERPC] spu sched: use DECLARE_BITMAP
  [POWERPC] spu sched: forced preemption at execution
  [POWERPC] spu sched: update some comments
  [POWERPC] spu sched: simplity spu_remove_from_active_list
  [POWERPC] spufs: optimize spu_run
  [POWERPC] spufs: runqueue simplification
  [POWERPC] spufs: move prio to spu_context
  [POWERPC] spufs: state_mutex cleanup
  [POWERPC] spufs: simplify state_mutex
  ...

12 years ago[POWERPC] Use udbg_early_init() on ppc32
David Gibson [Tue, 13 Feb 2007 04:54:22 +0000]
[POWERPC] Use udbg_early_init() on ppc32

udbg_early_init() is a function used on 64 bit systems, which
initializes whichever early udbg backend is configured.  This function
is not called on 32-bit, however if btext early debug is enabled it
does have an explicit, inline, #ifdef-ed assignment performing
analagous initialization.

This patch makes things more uniform by folding the btext
initialization as an option into udbg_early_init() and calling that
from the 32-bit setup path.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

12 years ago[POWERPC] Open Firmware serial port driver
Arnd Bergmann [Tue, 13 Feb 2007 20:35:38 +0000]
[POWERPC] Open Firmware serial port driver

This can be used for serial ports that are connected to an
OF platform bus but are not autodetected by the lecacy
serial support.
It will automatically take over devices that come from the
legacy serial detection, which usually is only one device.

In some cases, rtas may be set up to use the serial port
in the firmware, which allows easier debugging before probing
the serial ports. In this case, the "used-by-rtas" property
must be set by the firmware. This patch also adds code to the
legacy serial driver to check for this.

Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

12 years ago[POWERPC] Move MPIC smp routines into mpic.c
Michael Ellerman [Thu, 8 Feb 2007 07:34:04 +0000]
[POWERPC] Move MPIC smp routines into mpic.c

Move a couple of MPIC smp routines into mpic.c, they're inside an SMP
block in mpic.c - so they're still only built for SMP.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

12 years ago[POWERPC] Cleanup pseries kexec code
Michael Ellerman [Thu, 8 Feb 2007 07:33:55 +0000]
[POWERPC] Cleanup pseries kexec code

Move all the pseries kexec code into one file, platforms/pseries/kexec.c
Provide helpers for setting up ppc_md.kexec_cpu_down, so that we don't
have to have #ifdef CONFIG_KEXEC in setup.c

Move the initialisation of the ppc_md kexec callbacks into an init routine.
This is well and truly early enough to cause no change in behaviour, we
can't kexec until userspace has given us a kernel to kexec into.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

12 years ago[POWERPC] Cleanup pseries smp initialisation code
Michael Ellerman [Thu, 8 Feb 2007 07:33:55 +0000]
[POWERPC] Cleanup pseries smp initialisation code

Move some extern declarations from setup.c into the new pseries.h.
While we're at it, provide dummy implementations for !SMP, to avoid
cluttering the C file with more #ifdefs.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

12 years ago[POWERPC] Consolidate pseries platform header files into pseries.h
Michael Ellerman [Thu, 8 Feb 2007 07:33:51 +0000]
[POWERPC] Consolidate pseries platform header files into pseries.h

Following the example of platforms/pasemi, consolidate a couple of
tiny header files in platforms/pseries into pseries.h.

This gives us a convenient place to put things that need to be
available to the platform code, but not public. And hopefully will
help people resist the temptation of sticking externs in C files.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

12 years agoMerge branch 'cell-merge' of git+ssh://master.kernel.org/pub/scm/linux/kernel/git...
Paul Mackerras [Wed, 14 Feb 2007 00:33:39 +0000]
Merge branch 'cell-merge' of git+ssh:///linux/kernel/git/arnd/cell-2.6

12 years agoMerge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6
Linus Torvalds [Wed, 14 Feb 2007 00:28:23 +0000]
Merge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6

* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
  i2c: Stop using i2c_adapter.class_dev
  i2c: Remove the warning on missing adapter device
  i2c: Declare more i2c_adapter parent devices
  i2c: PA Semi SMBus driver
  i2c-amd8111: Proposed cleanups
  i2c-parport: Add support for One For All remote JP1 interface
  i2c-viapro: Add support for the VIA CX700 south bridge
  i2c: Add IDs to adapters
  i2c: Update the list of bus IDs
  i2c: Add driver suspend/resume/shutdown support
  i2c: completion header cleanups
  i2c-i801: Document the SMBus unhiding quirk
  i2c-i801: Spelling fix
  i2c: Fix typo in SMBus Write Word Data description
  i2c-piix4: Add support for the ATI SB600
  i2c-nforce2: Drop unused reference to pci_dev
  i2c/vt8231: Remove superfluous initialization
  i2c-ali1563: Fix device initialization
  i2c-ali1563: Improve the status messages

12 years agoMerge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
Linus Torvalds [Wed, 14 Feb 2007 00:12:23 +0000]
Merge branch 'upstream' of git://ftp.linux-mips.org/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] Fix sigset_t endianess swapping issues in 32-bit compat code.
  [MIPS] Fix uniprocessor Sibyte builds.
  [MIPS] Make entry.S a little more readable.
  [MIPS] Remove stray instruction from __get_user_asm_ll32.
  [MIPS] 32-bit: Fix warning about cast for fetching pointer from userspace.
  [MIPS] DECstation: Fix irq handling
  [MIPS] signals: make common _BLOCKABLE macro
  [MIPS] signal: Move sigframe definition for native O32/N64 into signal.c
  [MIPS] signal: Move {restore,setup}_sigcontext prototypes to their user
  [MIPS] signal: Fix warnings in o32 compat code.
  [MIPS] IP27: Enable N32 support in defconfig.
  Revert "[MIPS] Fix warning in get_user when fetching pointer object from userspace."
  [MIPS] Don't claim we support dma_declare_coherent_memory - we don't.
  [MIPS] Unify dma-{coherent,noncoherent.ip27,ip32}
  [MIPS] Improve branch prediction in ll/sc atomic operations.

12 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog
Linus Torvalds [Wed, 14 Feb 2007 00:10:08 +0000]
Merge /linux/kernel/git/wim/linux-2.6-watchdog

* master.kernel.org:/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: (23 commits)
  [WATCHDOG] timers cleanup
  [WATCHDOG] ib700wdt.c - convert to platform_device part 2
  [WATCHDOG] ib700wdt.c - convert to platform_device
  [WATCHDOG] ib700wdt.c spinlock/WDIOC_SETOPTIONS changes
  [WATCHDOG] ib700wdt.c small clean-up's
  [WATCHDOG] ib700wdt.c clean-up init and exit routines
  [WATCHDOG] ib700_wdt.c stop + set_heartbeat operations
  [WATCHDOG] show default value for nowayout in module parameter
  [WATCHDOG] advantechwdt.c - convert to platform_device part 2
  [WATCHDOG] advantechwdt.c - convert to platform_device
  [WATCHDOG] advantechwdt.c - move set_heartbeat to a seperate function
  [WATCHDOG] advantechwdt.c - cleanup before platform_device patches
  [WATCHDOG] acquirewdt.c - convert to platform_device part 2
  [WATCHDOG] acquirewdt.c - convert to platform_device
  [WATCHDOG] acquirewdt.c - clean before platform_device patches
  [WATCHDOG] pcwd_usb.c - get heartbeat from dip switches
  [WATCHDOG] pcwd.c - e-mail adres update
  [WATCHDOG] pcwd_usb.c - get heartbeat from dip switches
  [WATCHDOG] pcwd_usb.c - document includes
  [WATCHDOG] pcwd_pci.c - spinlock fixes
  ...

12 years ago[PATCH] Fix SAK_work workqueue initialization.
Eric W. Biederman [Tue, 13 Feb 2007 21:38:58 +0000]
[PATCH] Fix SAK_work workqueue initialization.

Somewhere in the rewrite of the work queues my cleanup of SAK handling
got broken.  Maybe I didn't retest it properly or possibly the API
was changing so fast I missed something.  Regardless currently
triggering a SAK now generates an ugly BUG_ON and kills the kernel.

Thanks to Alexey Dobriyan <adobriyan@openvz.org> for spotting this.

This modifies the use of SAK_work to initialize it when the data
structure it resides in is initialized, and to simply call
schedule_work when we need to generate a SAK.  I update both
data structures that have a SAK_work member for consistency.

All of the old PREPARE_WORK calls that are now gone.

If we call schedule_work again before it has processed it
has generated the first SAK it will simply ignore the duplicate
schedule_work request.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years ago[MIPS] Fix sigset_t endianess swapping issues in 32-bit compat code.
Ralf Baechle [Tue, 13 Feb 2007 00:05:11 +0000]
[MIPS] Fix sigset_t endianess swapping issues in 32-bit compat code.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

12 years ago[MIPS] Fix uniprocessor Sibyte builds.
Andrew Sharp [Sat, 10 Feb 2007 01:35:28 +0000]
[MIPS] Fix uniprocessor Sibyte builds.

Signed-off-by: Andrew Sharp <tigerand@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

12 years ago[MIPS] Make entry.S a little more readable.
Franck Bui-Huu [Tue, 13 Feb 2007 13:50:18 +0000]
[MIPS] Make entry.S a little more readable.

When CONFIG_PREEMPT is not set, it also moves one branch instruction from
ret_from_irq() to ret_from_exception().  Therefore we favour the return
from irq case which should be more common than the other one.

Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com>
Acked-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

12 years ago[MIPS] Remove stray instruction from __get_user_asm_ll32.
Ralf Baechle [Tue, 13 Feb 2007 15:01:21 +0000]
[MIPS] Remove stray instruction from __get_user_asm_ll32.

This did result in double clearing of the error return value on success
only but should make a meassurable overhead for sigreturn.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

12 years ago[MIPS] 32-bit: Fix warning about cast for fetching pointer from userspace.
Ralf Baechle [Tue, 13 Feb 2007 11:45:24 +0000]
[MIPS] 32-bit: Fix warning about cast for fetching pointer from userspace.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

12 years ago[MIPS] DECstation: Fix irq handling
Atsushi Nemoto [Mon, 12 Feb 2007 14:48:26 +0000]
[MIPS] DECstation: Fix irq handling

When I post a patch (commit f431baa55abf8adeed0c718b51deacbc151f58f1),
I just tried to not change behavior of existing codes, but it seems
dec/int-handler.S had been broken since its previous commit
937a801576f954bd030d7c4a5a94571710d87c0b.

The caller of plat_irq_dispatch do setup/restore TI_REGS($28), so
dec's plat_irq_dispatch should not do it, and there is no need to
adjust RA.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

12 years ago[MIPS] signals: make common _BLOCKABLE macro
Franck Bui-Huu [Fri, 9 Feb 2007 15:07:37 +0000]
[MIPS] signals: make common _BLOCKABLE macro

Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

12 years ago[MIPS] signal: Move sigframe definition for native O32/N64 into signal.c
Ralf Baechle [Tue, 13 Feb 2007 01:31:48 +0000]
[MIPS] signal: Move sigframe definition for native O32/N64 into signal.c

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

12 years ago[MIPS] signal: Move {restore,setup}_sigcontext prototypes to their user
Ralf Baechle [Tue, 13 Feb 2007 01:28:09 +0000]
[MIPS] signal: Move {restore,setup}_sigcontext prototypes to their user

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

12 years ago[MIPS] signal: Fix warnings in o32 compat code.
Ralf Baechle [Tue, 13 Feb 2007 00:50:57 +0000]
[MIPS] signal: Fix warnings in o32 compat code.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

12 years ago[MIPS] IP27: Enable N32 support in defconfig.
Ralf Baechle [Mon, 12 Feb 2007 23:26:01 +0000]
[MIPS] IP27: Enable N32 support in defconfig.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

12 years agoRevert "[MIPS] Fix warning in get_user when fetching pointer object from userspace."
Ralf Baechle [Mon, 12 Feb 2007 23:12:38 +0000]
Revert "[MIPS] Fix warning in get_user when fetching pointer object from userspace."

This reverts commit 4ed3a77f38c023658784804cb39a7ce18063dc88.

12 years ago[MIPS] Don't claim we support dma_declare_coherent_memory - we don't.
Ralf Baechle [Mon, 12 Feb 2007 22:22:53 +0000]
[MIPS] Don't claim we support dma_declare_coherent_memory - we don't.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

12 years ago[MIPS] Unify dma-{coherent,noncoherent.ip27,ip32}
Ralf Baechle [Thu, 16 Nov 2006 02:56:12 +0000]
[MIPS] Unify dma-{coherent,noncoherent.ip27,ip32}

Platforms will now have to supply a function dma_device_is_coherent which
returns if a particular device participates in the coherence domain.  For
most platforms this function will always return 0 or 1.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

12 years ago[MIPS] Improve branch prediction in ll/sc atomic operations.
Ralf Baechle [Thu, 28 Sep 2006 00:45:21 +0000]
[MIPS] Improve branch prediction in ll/sc atomic operations.

Now that finally all supported versions of binutils have functioning
support for .subsection use .subsection to tweak the branch prediction

I did not modify the R10000 errata variants because it seems unclear if
this will invalidate the workaround which actually relies on the cheesy
prediction of branch likely to cause a misspredict if the sc was
successful.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

12 years agoMerge ../linux-2.6-watchdog-mm
Wim Van Sebroeck [Tue, 13 Feb 2007 22:24:34 +0000]
Merge ../linux-2.6-watchdog-mm

12 years agoMerge branch '85xx' into for_paulus
Kumar Gala [Tue, 13 Feb 2007 22:14:01 +0000]
Merge branch '85xx' into for_paulus

12 years ago[POWERPC] 85xx: Drop use of SYNC macro in head_fsl_booke.S
Becky Bruce [Tue, 13 Feb 2007 22:00:49 +0000]
[POWERPC] 85xx: Drop use of SYNC macro in head_fsl_booke.S

Eliminate needless invocation of the SYNC macro (which always evaluates to
nothing on BookE) from head_fsl_booke.S (for both arch/ppc & arch/powerpc).

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

12 years agoi2c: Stop using i2c_adapter.class_dev
Jean Delvare [Tue, 13 Feb 2007 21:09:04 +0000]
i2c: Stop using i2c_adapter.class_dev

Stop using i2c_adapter.class_dev, as it is going to be removed
soon. Luckily, there are only 4 RTC drivers affected.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>

12 years agoi2c: Remove the warning on missing adapter device
Jean Delvare [Tue, 13 Feb 2007 21:09:04 +0000]
i2c: Remove the warning on missing adapter device

Now that the i2c_adapter migration plan changed and we are going to
keep i2c_adapter.dev, it's no longer that urgent to add a proper device
to all i2c_adapter drivers. Thus is seems resonable to degrade the
warning asking authors to migrate their driver to a debug message.

Signed-off-by: Jean Delvare <khali@linux-fr.org>

12 years agoi2c: Declare more i2c_adapter parent devices
Jean Delvare [Tue, 13 Feb 2007 21:09:03 +0000]
i2c: Declare more i2c_adapter parent devices

Declare the parent device of i2c_adapter devices each time we can
easily do so. It makes the i2c_adapter appear at the right place in
the device tree, rather than as a platform device.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Len Brown <len.brown@intel.com>
Cc: Jordan Crouse <jordan.crouse@amd.com>
Cc: Jody McIntyre <scjody@modernduck.com>
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: v4l-dvb-maintainer@linuxtv.org
Cc: Petr Vandrovec <vandrove@vc.cvut.cz>

12 years agoi2c: PA Semi SMBus driver
Olof Johansson [Tue, 13 Feb 2007 21:09:03 +0000]
i2c: PA Semi SMBus driver

New driver for the PA Semi SMBus interfaces.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

12 years agoi2c-amd8111: Proposed cleanups
Jean Delvare [Tue, 13 Feb 2007 21:09:02 +0000]
i2c-amd8111: Proposed cleanups

Proposed cleanups to the i2c-amd8111 SMBus driver:
* Fold long lines.
* Add an explicit mask when writing the low byte of a word.
* Use I2C_SMBUS_BLOCK_MAX instead of hardcoding 32.
* Discard extra blank lines.
* Use boolean not instead of bitwise not for bit tests, it's clearer.
* Return -EBUSY rather than -1 on I/O resource conflict.
* Fix a race on device registration, initialization should be done
  before the bus is registered.

Signed-off-by: Jean Delvare <khali@linux-fr.org>

12 years agoi2c-parport: Add support for One For All remote JP1 interface
Jonathan McDowell [Tue, 13 Feb 2007 21:09:02 +0000]
i2c-parport: Add support for One For All remote JP1 interface

This simple patch adds support to i2c-parport for the One For All remote
JP1 parallel port interfaces which can be found detailed at:

http://www.hifi-remote.com/jp1/hardware.shtml

These allow access to the internal configuration EEPROM on various
remote controls and there are a variety of Windows tools that make use
of this hardware. I have tested this patch with the "simple" parallel
port device and a One For All URC-7562 and confirmed that the data read
using the eeprom i2c driver matches that returned by the Windows "IR"
JP1 tool.

Signed-off-by: Jonathan McDowell <noodles@earth.li>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

12 years agoi2c-viapro: Add support for the VIA CX700 south bridge
Jean Delvare [Tue, 13 Feb 2007 21:09:02 +0000]
i2c-viapro: Add support for the VIA CX700 south bridge

We do not have any documentation for the CX700, but it was reported
to work fine. Thanks to Claas Langbehn for testing.

Signed-off-by: Jean Delvare <khali@linux-fr.org>

12 years agoi2c: Add IDs to adapters
Stephen Hemminger [Tue, 13 Feb 2007 21:09:01 +0000]
i2c: Add IDs to adapters

IDs have been defined but not used by most of the I2C adapters.
By having a unique ID, clients can check for correct connection
during probe.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

12 years agoi2c: Update the list of bus IDs
Jean Delvare [Tue, 13 Feb 2007 21:09:01 +0000]
i2c: Update the list of bus IDs

* The Voodoo3 has no SMBus, it has two bit-banged busses which
  already have an ID assigned (I2C_HW_B_VOO).
* The i2c-ipmi bus driver was a non-sense, it'll never be ported
  to Linux 2.6.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Yani Ioannou <yani.ioannou@gmail.com>

12 years agoi2c: Add driver suspend/resume/shutdown support
David Brownell [Tue, 13 Feb 2007 21:09:00 +0000]
i2c: Add driver suspend/resume/shutdown support

Driver model updates for the I2C core:

 - Add new suspend(), resume(), and shutdown() methods.  Use them in the
   standard driver model style; document them.

 - Minor doc updates to highlight zero-initialized fields in drivers, and
   the driver model accessors for "clientdata".

If any i2c drivers were previously using the old suspend/resume calls
in "struct driver", they were getting warning messages ... and will
now no longer work.  Other than that, this patch changes no behaviors;
and it lets I2C drivers use conventional PM and shutdown support.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

12 years agoi2c: completion header cleanups
Jean Delvare [Tue, 13 Feb 2007 21:09:00 +0000]
i2c: completion header cleanups

i2c-core and i2c-isa use completions without including
<linux/completion.h>. Fix it.

i2c-powermac includes <linux/completion.h> but doesn't use any
completion. Fix it.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Brownell <david-b@pacbell.net>

12 years agoi2c-i801: Document the SMBus unhiding quirk
Jean Delvare [Tue, 13 Feb 2007 21:09:00 +0000]
i2c-i801: Document the SMBus unhiding quirk

This is a frequently asked question so it deserves a paragraph in
the driver documentation.

Signed-off-by: Jean Delvare <khali@linux-fr.org>

12 years agoi2c-i801: Spelling fix
Jean Delvare [Tue, 13 Feb 2007 21:08:59 +0000]
i2c-i801: Spelling fix

Signed-off-by: Jean Delvare <khali@linux-fr.org>

12 years agoi2c: Fix typo in SMBus Write Word Data description
Mike Frysinger [Tue, 13 Feb 2007 21:08:59 +0000]
i2c: Fix typo in SMBus Write Word Data description

Write data, don't read it.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

12 years agoi2c-piix4: Add support for the ATI SB600
Jean Delvare [Tue, 13 Feb 2007 21:08:59 +0000]
i2c-piix4: Add support for the ATI SB600

Add support for the ATI SB600 SMBus controller.

Signed-off-by: Jean Delvare <khali@linux-fr.org>

12 years agoi2c-nforce2: Drop unused reference to pci_dev
Jean Delvare [Tue, 13 Feb 2007 21:08:58 +0000]
i2c-nforce2: Drop unused reference to pci_dev

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Hans-Frieder Vogt <hfvogt@gmx.net>

12 years agoi2c/vt8231: Remove superfluous initialization
David Brownell [Tue, 13 Feb 2007 21:08:58 +0000]
i2c/vt8231: Remove superfluous initialization

Remove a superfluous initialization from the vt8231 hwmon driver; the
i2c core does this, and the source field will be vanishing soon.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

12 years agoi2c-ali1563: Fix device initialization
Jean Delvare [Tue, 13 Feb 2007 21:08:57 +0000]
i2c-ali1563: Fix device initialization

The i2c-ali1563 initialization looks quite broken to me:
* If the I/O space isn't enabled, we forcibly set 3 bits in
  the PCI configuration space instead of just the one enabling
  the I/O space.
* After that we pretend to check if the write worked, but we
  don't actually read the new value from the register.
* It's probably not a good idea to enable the I/O space if no
  base address has been set.

So I propose the following changes to that part of the driver:
* Merge ali1563_enable() into ali1563_setup().
* Check the base address before the I/O space enabled bit.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Rudolf Marek <r.marek@assembler.cz>

12 years agoi2c-ali1563: Improve the status messages
Jean Delvare [Tue, 13 Feb 2007 21:08:57 +0000]
i2c-ali1563: Improve the status messages

Improve the status messages printed by the i2c-ali1563 driver.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Rudolf Marek <r.marek@assembler.cz>

12 years ago[POWERPC] cell: pm_rtas_activat_signals routine cleanup
Maynard Johnson [Tue, 13 Feb 2007 21:02:03 +0000]
[POWERPC] cell: pm_rtas_activat_signals routine cleanup

The code was setting up the debug bus for group 21 when profiling on the
event PPU CYCLES.  The debug bus is not actually used by the hardware
performance counters when counting PPU CYCLES.  Setting up the debug bus
for PPU CYCLES causes signal routing conflicts on the debug bus when
profiling PPU cycles and another PPU event.  This patch fixes the code to
only setup the debug bus to route the performance signals for the non
PPU CYCLE events.

Signed-off-by: Maynard Johnson <mpjohn@us.ibm.com>
Signed-off-by: Carl Love <carll@us.ibm.com>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>

12 years ago[POWERPC] cell: PPU Oprofile cleanup patch
Carl Love [Tue, 13 Feb 2007 21:02:02 +0000]
[POWERPC] cell: PPU Oprofile cleanup patch

This is a clean up patch that includes the following changes:

 -Some comments were added to clarify the code based on feedback
  from the community.
 -The write_pm_cntrl() and set_count_mode() were passed a
  structure element from a global variable.  The argument was
  removed so the functions now just operate on the global directly.
 -The set_pm_event() function call in the cell_virtual_cntr()
  routine was moved to a for-loop before the for_each_cpu loop

Signed-off-by: Carl Love <carll@us.ibm.com>
Signed-off-by: Maynard Johnson <mpjohn@us.ibm.com>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>

12 years ago[IPSEC]: Fix the address family to refer encap_family
Kazunori MIYAZAWA [Tue, 13 Feb 2007 20:57:16 +0000]
[IPSEC]: Fix the address family to refer encap_family

Fix the address family to refer encap_family
when comparing with a kernel generated xfrm_state

Signed-off-by: Kazunori MIYAZAWA <miyazawa@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[IPSEC]: changing API of xfrm6_tunnel_register
Kazunori MIYAZAWA [Tue, 13 Feb 2007 20:55:55 +0000]
[IPSEC]: changing API of xfrm6_tunnel_register

This patch changes xfrm6_tunnel register and deregister
interface to prepare for solving the conflict of device
tunnels with inter address family IPsec tunnel.
There is no device which conflicts with IPv4 over IPv6
IPsec tunnel.

Signed-off-by: Kazunori MIYAZAWA <miyazawa@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[POWERPC] spufs: avoid accessing kernel memory through mmapped /mem node
Masato Noguchi [Tue, 13 Feb 2007 20:54:30 +0000]
[POWERPC] spufs: avoid accessing kernel memory through mmapped /mem node

I found an exploit in current kernel.
Currently, there is no range check about mmapping "/mem" node in
spufs. Thus, an application can access privilege memory region.

In case this kernel already worked on a public server, I send this
information only here.
If there are such servers in somewhere, please replace it, ASAP.

Signed-off-by: Masato Noguchi <Masato.Noguchi@jp.sony.com>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>

12 years ago[POWERPC] spu sched: static timeslicing for SCHED_RR contexts
Christoph Hellwig [Tue, 13 Feb 2007 20:54:29 +0000]
[POWERPC] spu sched: static timeslicing for SCHED_RR contexts

For SCHED_RR tasks we can do some really trivial timeslicing.  Basically
we fire up a time for every scheduler tick that searches for a higher
or same priority thread that is on the runqueue and if there is one
context switches to it.  Because we can't lock spus from timer context
we actually run this from a delayed runqueue instead of a timer.

A nice optimization would be to skip the actual priority bitmap search
when there are less contexts than physical spus available.  To implement
this I need a so far unpublished patch from Andre, and it will be added
after we have that patch in.

Note that right now we only do the time slicing for SCHED_RR tasks.
The code would work for SCHED_OTHER tasks aswell, but their prio
value is defered from the one the PPU thread has at time of spu_run,
and using this for spu scheduling decisions would make the code very
unfair.  SCHED_OTHER support will be enabled once we the spu scheduler
knows how to calculcate cpu_context.prio (very soon)

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>

12 years ago[POWERPC] spu sched: use DECLARE_BITMAP
Christoph Hellwig [Tue, 13 Feb 2007 20:54:28 +0000]
[POWERPC] spu sched: use DECLARE_BITMAP

use DECLARE_BITMAP in the spu scheduler instead of reimplementing it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>

12 years ago[POWERPC] spu sched: forced preemption at execution
Christoph Hellwig [Tue, 13 Feb 2007 20:54:27 +0000]
[POWERPC] spu sched: forced preemption at execution

If we start a spu context with realtime priority we want it to run
immediately and not wait until some other lower priority thread has
finished.  Try to find a suitable victim and use it's spu in this
case.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>