9 years agoALSA: ctxfi - fix PTP address initialization
Jaroslav Kysela [Tue, 2 Feb 2010 18:58:25 +0000]
ALSA: ctxfi - fix PTP address initialization

After hours of debugging, I finally found the reason why some source
and runtime combination does not work. The PTP (page table pages)
address must be aligned. I am not sure how much, but alignment to
PAGE_SIZE is sufficient. Also, use ALSA's page allocation routines
to ensure proper virtual -> physical address translation.

Cc: <stable@kernel.org>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

9 years agoALSA: ac97: add AC97 STMicroelectronics' codecs
Krzysztof Helt [Sun, 10 Jan 2010 16:21:14 +0000]
ALSA: ac97: add AC97 STMicroelectronics' codecs

Add the STMicroelectronics ST7597 codec and an unknown codec
from the same manufacturer found on the Creative SB 128 card (CT4810).

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

9 years agoALSA: ac97: Add Dell Dimension 2400 to Headphone/Line Jack Sense blacklist
Daniel T Chen [Sat, 9 Jan 2010 06:22:29 +0000]
ALSA: ac97: Add Dell Dimension 2400 to Headphone/Line Jack Sense blacklist

This model needs both 'Headphone Jack Sense' and 'Line Jack Sense' muted
for audible playback, so just add it to the ad1981 jack sense blacklist.

Cc: stable@kernel.org
Tested-by: Pete <x41215201@gmail.com>
Signed-off-by: Daniel T Chen <crimsun@ubuntu.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

9 years agosbawe: fix memory detection part 2
Krzysztof Helt [Mon, 4 Jan 2010 21:23:34 +0000]
sbawe: fix memory detection part 2

The patch "sbawe: fix memory detection" fixed detection
for memoryless SB32 cards but broke detection of memory
above 512KB. This patch fixes the regression.

The patch has been tested on the SB32 card (CT3670) with
0MB, 2MB and 8MB memory installed.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

9 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux...
Jaroslav Kysela [Fri, 8 Jan 2010 08:26:34 +0000]
Merge branch 'master' of git://git./linux/kernel/git/torvalds/linux-2.6 into fixes

9 years agosound: oss: off by one bug
Dan Carpenter [Sun, 3 Jan 2010 11:39:27 +0000]
sound: oss: off by one bug

The problem is that in the original code sound_nblocks could go up to 1024
which would be an array overflow.

This was found with a static checker and has been compile tested only.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

9 years agoMerge branch 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied...
Linus Torvalds [Thu, 7 Jan 2010 04:26:42 +0000]
Merge branch 'drm-linus' of git://git./linux/kernel/git/airlied/drm-2.6

* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/radeon/kms: rs600: use correct mask for SW interrupt
  gpu/drm/radeon/radeon_irq.c: move a dereference below a NULL test
  drm/radeon/radeon_device.c: move a dereference below a NULL test
  drm/radeon/radeon_fence.c: move a dereference below the NULL test
  drm/radeon/radeon_connectors.c: add a NULL test before dereference
  drm/radeon/kms: fix memory leak
  drm/kms: Fix &&/|| confusion in drm_fb_helper_connector_parse_command_line()
  drm/edid: Fix CVT width/height decode
  drm/edid: Skip empty CVT codepoints
  drm: remove address mask param for drm_pci_alloc()
  drm/radeon/kms: add missing breaks in i2c and ss lookups
  drm/radeon/kms: add primary dac adj values table
  drm/radeon/kms: fallback to default connector table

9 years agoMerge remote branch 'korg/drm-radeon-next' into drm-linus
Dave Airlie [Thu, 7 Jan 2010 04:00:29 +0000]
Merge remote branch 'korg/drm-radeon-next' into drm-linus

* korg/drm-radeon-next:
  drm/radeon/kms: rs600: use correct mask for SW interrupt
  gpu/drm/radeon/radeon_irq.c: move a dereference below a NULL test
  drm/radeon/radeon_device.c: move a dereference below a NULL test
  drm/radeon/radeon_fence.c: move a dereference below the NULL test
  drm/radeon/radeon_connectors.c: add a NULL test before dereference
  drm/radeon/kms: fix memory leak
  drm/radeon/kms: add missing breaks in i2c and ss lookups
  drm/radeon/kms: add primary dac adj values table
  drm/radeon/kms: fallback to default connector table

9 years agodrm/radeon/kms: rs600: use correct mask for SW interrupt
Luca Tettamanti [Mon, 28 Dec 2009 21:53:05 +0000]
drm/radeon/kms: rs600: use correct mask for SW interrupt

The mask happens to be the same, but the IH is reading the status, not the
not the control register.

Signed-off-by: Luca Tettamanti <kronos.it@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agogpu/drm/radeon/radeon_irq.c: move a dereference below a NULL test
Darren Jenkins [Wed, 30 Dec 2009 01:16:35 +0000]
gpu/drm/radeon/radeon_irq.c: move a dereference below a NULL test

If a NULL value is possible, the dereference should only occur after the
NULL test.

Coverity CID: 13338

Signed-off-by: Darren Jenkins <darrenrjenkins@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/radeon_device.c: move a dereference below a NULL test
Darren Jenkins [Wed, 30 Dec 2009 01:18:30 +0000]
drm/radeon/radeon_device.c: move a dereference below a NULL test

If a NULL value is possible, the dereference should only occur after the
NULL test.

Coverity CID: 13335

Signed-off-by: Darren Jenkins <darrenrjenkins@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/radeon_fence.c: move a dereference below the NULL test
Darren Jenkins [Wed, 30 Dec 2009 01:20:05 +0000]
drm/radeon/radeon_fence.c: move a dereference below the NULL test

If a NULL value is possible, the dereference should only occur after the
NULL test.

Coverity CID: 13334

Signed-off-by: Darren Jenkins <darrenrjenkins@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/radeon_connectors.c: add a NULL test before dereference
Darren Jenkins [Wed, 30 Dec 2009 01:22:55 +0000]
drm/radeon/radeon_connectors.c: add a NULL test before dereference

The encoder variable can be NULL in this function so I believe it should
be checked before dereference.

Coverity CID: 13253

[airlied: extremely unlikely to happen]

Signed-off-by: Darren Jenkins <darrenrjenkins@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms: fix memory leak
Jiri Slaby [Wed, 6 Jan 2010 16:39:31 +0000]
drm/radeon/kms: fix memory leak

Stanse found a memory leak in radeon_master_create. master_priv is not
freed/assigned on all paths. Fix that.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agoMerge branch 'drm-core-next' into drm-linus
Dave Airlie [Thu, 7 Jan 2010 03:36:00 +0000]
Merge branch 'drm-core-next' into drm-linus

* drm-core-next:
  drm/kms: Fix &&/|| confusion in drm_fb_helper_connector_parse_command_line()
  drm/edid: Fix CVT width/height decode
  drm/edid: Skip empty CVT codepoints
  drm: remove address mask param for drm_pci_alloc()

9 years agodrm/kms: Fix &&/|| confusion in drm_fb_helper_connector_parse_command_line()
Roel Kluin [Thu, 31 Dec 2009 12:06:29 +0000]
drm/kms: Fix &&/|| confusion in drm_fb_helper_connector_parse_command_line()

This always evaluates to true.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/edid: Fix CVT width/height decode
Adam Jackson [Mon, 4 Jan 2010 22:53:07 +0000]
drm/edid: Fix CVT width/height decode

Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/edid: Skip empty CVT codepoints
Adam Jackson [Mon, 4 Jan 2010 22:53:06 +0000]
drm/edid: Skip empty CVT codepoints

Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm: remove address mask param for drm_pci_alloc()
Zhenyu Wang [Tue, 5 Jan 2010 03:25:05 +0000]
drm: remove address mask param for drm_pci_alloc()

drm_pci_alloc() has input of address mask for setting pci dma
mask on the device, which should be properly setup by drm driver.
And leave it as a param for drm_pci_alloc() would cause confusion
or mistake would corrupt the correct dma mask setting, as seen on
intel hw which set wrong dma mask for hw status page. So remove
it from drm_pci_alloc() function.

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agoMerge branch 'drm-intel-next' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt...
Linus Torvalds [Thu, 7 Jan 2010 02:16:17 +0000]
Merge branch 'drm-intel-next' of git://git./linux/kernel/git/anholt/drm-intel

* 'drm-intel-next' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: (23 commits)
  drm/i915: remove full registers dump debug
  drm/i915: Add DP dpll limit on ironlake and use existing DPLL search function
  drm/i915: Select the correct BPC for LVDS on Ironlake
  drm/i915: Make the BPC in FDI rx/transcoder be consistent with that in pipeconf on Ironlake
  drm/i915: Enable/disable the dithering for LVDS based on VBT setting
  drm/i915: Permit pinning whilst the device is 'suspended'
  drm/i915: Hold struct mutex whilst pinning power context bo.
  drm/i915: fix unused var
  drm/i915: Storage class should be before const qualifier
  drm/i915: remove render reclock support
  drm/i915: Fix RC6 suspend/resume
  drm/i915: execbuf2 support
  drm/i915: Reload hangcheck timer too for Ironlake
  drm/i915: only enable hotplug for detected outputs
  drm/i915: Track whether cursor needs physical address in intel_device_info
  drm/i915: Implement IS_* macros using static tables
  drm/i915: Move PCI IDs into i915 driver
  drm/i915: Update LVDS connector status when receiving ACPI LID event
  drm/i915: Add MALATA PC-81005 to ACPI LID quirk list
  drm/i915: implement new pm ops for i915
  ...

9 years agoNOMMU: Use copy_*_user_page() in access_process_vm()
Jie Zhang [Wed, 6 Jan 2010 17:23:28 +0000]
NOMMU: Use copy_*_user_page() in access_process_vm()

The MMU code uses the copy_*_user_page() variants in access_process_vm()
rather than copy_*_user() as the former includes an icache flush.  This
is important when doing things like setting software breakpoints with
gdb.  So switch the NOMMU code over to do the same.

This patch makes the reasonable assumption that copy_from_user_page()
won't fail - which is probably fine, as we've checked the VMA from which
we're copying is usable, and the copy is not allowed to cross VMAs.  The
one case where it might go wrong is if the VMA is a device rather than
RAM, and that device returns an error which - in which case rubbish will
be returned rather than EIO.

Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: David McCullough <david_mccullough@mcafee.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoNOMMU: Avoiding duplicate icache flushes of shared maps
Mike Frysinger [Wed, 6 Jan 2010 17:23:23 +0000]
NOMMU: Avoiding duplicate icache flushes of shared maps

When working with FDPIC, there are many shared mappings of read-only
code regions between applications (the C library, applet packages like
busybox, etc.), but the current do_mmap_pgoff() function will issue an
icache flush whenever a VMA is added to an MM instead of only doing it
when the map is initially created.

The flush can instead be done when a region is first mmapped PROT_EXEC.
Note that we may not rely on the first mapping of a region being
executable - it's possible for it to be PROT_READ only, so we have to
remember whether we've flushed the region or not, and then flush the
entire region when a bit of it is made executable.

However, this also affects the brk area.  That will no longer be
executable.  We can mprotect() it to PROT_EXEC on MPU-mode kernels, but
for NOMMU mode kernels, when it increases the brk allocation, making
sys_brk() flush the extra from the icache should suffice.  The brk area
probably isn't used by NOMMU programs since the brk area can only use up
the leavings from the stack allocation, where the stack allocation is
larger than requested.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoFDPIC: Respect PT_GNU_STACK exec protection markings when creating NOMMU stack
Mike Frysinger [Wed, 6 Jan 2010 17:23:17 +0000]
FDPIC: Respect PT_GNU_STACK exec protection markings when creating NOMMU stack

The current code will load the stack size and protection markings, but
then only use the markings in the MMU code path.  The NOMMU code path
always passes PROT_EXEC to the mmap() call.  While this doesn't matter
to most people whilst the code is running, it will cause a pointless
icache flush when starting every FDPIC application.  Typically this
icache flush will be of a region on the order of 128KB in size, or may
be the entire icache, depending on the facilities available on the CPU.

In the case where the arch default behaviour seems to be desired
(EXSTACK_DEFAULT), we probe VM_STACK_FLAGS for VM_EXEC to determine
whether we should be setting PROT_EXEC or not.

For arches that support an MPU (Memory Protection Unit - an MMU without
the virtual mapping capability), setting PROT_EXEC or not will make an
important difference.

It should be noted that this change also affects the executability of
the brk region, since ELF-FDPIC has that share with the stack.  However,
this is probably irrelevant as NOMMU programs aren't likely to use the
brk region, preferring instead allocation via mmap().

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoMerge branch 'for-2.6.33' of git://linux-nfs.org/~bfields/linux
Linus Torvalds [Thu, 7 Jan 2010 02:10:15 +0000]
Merge branch 'for-2.6.33' of git://linux-nfs.org/~bfields/linux

* 'for-2.6.33' of git://linux-nfs.org/~bfields/linux:
  sunrpc: fix peername failed on closed listener
  nfsd: make sure data is on disk before calling ->fsync
  nfsd: fix "insecure" export option

9 years agosunrpc: fix peername failed on closed listener
Xiaotian Feng [Thu, 31 Dec 2009 02:52:36 +0000]
sunrpc: fix peername failed on closed listener

There're some warnings of "nfsd: peername failed (err 107)!"
socket error -107 means Transport endpoint is not connected.
This warning message was outputed by svc_tcp_accept() [net/sunrpc/svcsock.c],
when kernel_getpeername returns -107. This means socket might be CLOSED.

And svc_tcp_accept was called by svc_recv() [net/sunrpc/svc_xprt.c]

        if (test_bit(XPT_LISTENER, &xprt->xpt_flags)) {
        <snip>
                newxpt = xprt->xpt_ops->xpo_accept(xprt);
        <snip>

So this might happen when xprt->xpt_flags has both XPT_LISTENER and XPT_CLOSE.

Let's take a look at commit b0401d72, this commit has moved the close
processing after do recvfrom method, but this commit also introduces this
warnings, if the xpt_flags has both XPT_LISTENER and XPT_CLOSED, we should
close it, not accpet then close.

Signed-off-by: Xiaotian Feng <dfeng@redhat.com>
Cc: J. Bruce Fields <bfields@fieldses.org>
Cc: Neil Brown <neilb@suse.de>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: stable@kernel.org
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

9 years agonfsd: make sure data is on disk before calling ->fsync
Christoph Hellwig [Fri, 25 Dec 2009 16:44:45 +0000]
nfsd: make sure data is on disk before calling ->fsync

nfsd is not using vfs_fsync, so I missed it when changing the calling
convention during the 2.6.32 window.  This patch fixes it to not only
start the data writeout, but also wait for it to complete before calling
into ->fsync.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: stable@kernel.org
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

9 years agoMerge branch 'davinci-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman...
Linus Torvalds [Wed, 6 Jan 2010 18:46:27 +0000]
Merge branch 'davinci-fixes' of git://git./linux/kernel/git/khilman/linux-davinci

* 'davinci-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci:
  DaVinci: DM365: Add the device_enable for the DaVinci Keyscan
  davinci: enable ARCH_HAS_HOLES_MEMORYMODEL for DaVinci
  davinci: da8xx/omap-l1: mark RTC as a wakeup source
  davinci: cp_intc: provide set_wake function
  Davinci VPFE Capture: Take i2c adapter id through platform data

9 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6
Linus Torvalds [Wed, 6 Jan 2010 18:45:50 +0000]
Merge git://git./linux/kernel/git/jejb/scsi-rc-fixes-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:
  [SCSI] lpfc 8.3.7: Update Driver version to 8.3.7
  [SCSI] lpfc 8.3.7: Fix discovery failures.
  [SCSI] lpfc 8.3.7: Fix SCSI protocol related errors.
  [SCSI] lpfc 8.3.7: Fix hardware/SLI relates issues
  [SCSI] lpfc 8.3.7: Fix NPIV operation errors
  [SCSI] lpfc 8.3.7: Fix FC protocol errors
  [SCSI] stex: fix scan of nonexistent lun
  [SCSI] pmcraid: fix to avoid twice scsi_dma_unmap for a command
  [SCSI] qla2xxx: Update version number to 8.03.01-k9.
  [SCSI] qla2xxx: Added to EEH support.
  [SCSI] qla2xxx: Extend base EEH support in qla2xxx.
  [SCSI] qla2xxx: Fix for a multiqueue bug in CPU affinity mode
  [SCSI] qla2xxx: Get the link data rate explicitly during device resync.
  [SCSI] cxgb3i: Fix a login over vlan issue

9 years agodrm/i915: remove full registers dump debug
Zhenyu Wang [Mon, 28 Dec 2009 05:23:36 +0000]
drm/i915: remove full registers dump debug

This one reverts 9e3a6d155ed0a7636b926a798dd7221ea107b274.
As reported by http://bugzilla.kernel.org/show_bug.cgi?id=14485,
this dump will cause hang problem on some machine. If something
really needs this kind of full registers dump, that could be done
within intel-gpu-tools.

Cc: Ben Gamari <bgamari.foss@gmail.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>

9 years agodrm/i915: Add DP dpll limit on ironlake and use existing DPLL search function
Zhao Yakui [Thu, 31 Dec 2009 08:06:04 +0000]
drm/i915: Add DP dpll limit on ironlake and use existing DPLL search function

For some clocks, the old Ironlake DPLL calculator wold give m/n/p
combinations that didn't match the spreadsheet of what HW validation
tests.  Instead, use the G4X DPLL calculator, which does a better job
at it.

So we use the intel_g4x_find_best_pll to calculate the DPLL for CRT/HDMI/LVDS
on ironlake. At the same time to consider the dpll setting for display port, we
add the display port DPLL limit on ironlake, which will directly use the
function of intel_find_pll_ironlake_dp to get the corresponding dpll setting.

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>

9 years agodrm/i915: Select the correct BPC for LVDS on Ironlake
Zhao Yakui [Mon, 4 Jan 2010 08:29:32 +0000]
drm/i915: Select the correct BPC for LVDS on Ironlake

Select the correct BPC for LVDS on Ironlake. If it is 18-bit LVDS panel,
the BPC will be 6. When it is 24-bit LVDS panel, the BPC will 8.
At the same time the BPC will be 8 when the output device is CRT/HDMI/DP.

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>

9 years agodrm/i915: Make the BPC in FDI rx/transcoder be consistent with that in pipeconf on...
Zhao Yakui [Mon, 4 Jan 2010 08:29:31 +0000]
drm/i915: Make the BPC in FDI rx/transcoder be consistent with that in pipeconf on Ironlake

Make the BPC in FDI rx/transcoder be consistent with that in pipeconf on Ironlake.

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>

9 years agodrm/i915: Enable/disable the dithering for LVDS based on VBT setting
Zhao Yakui [Mon, 4 Jan 2010 08:29:30 +0000]
drm/i915: Enable/disable the dithering for LVDS based on VBT setting

Enable/disable the dithering for LVDS based on VBT setting. On the 965/g4x
platform the dithering flag is defined in LVDS register. And on the ironlake
the dithering flag is defined in pipeconf register.

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>

9 years agodrm/i915: Permit pinning whilst the device is 'suspended'
Chris Wilson [Mon, 4 Jan 2010 18:57:57 +0000]
drm/i915: Permit pinning whilst the device is 'suspended'

As pinning (allocating and binding GTT memory) does not actually invoke
GPU commands, it is safe, and indeed is attempted, during resumption
from suspension:

  [drm:intel_init_clock_gating] *ERROR* failed to pin power context: -16

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reported-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: stable@kernel.org
Signed-off-by: Eric Anholt <eric@anholt.net>

9 years agodrm/i915: Hold struct mutex whilst pinning power context bo.
Chris Wilson [Mon, 4 Jan 2010 18:57:56 +0000]
drm/i915: Hold struct mutex whilst pinning power context bo.

Hugh found an error path where we were attempting to unref a bo without
holding the struct mutex:

  [drm:intel_init_clock_gating] *ERROR* failed to pin power context: -16
  ------------[ cut here ]------------
  WARNING: at drivers/gpu/drm/drm_gem.c:438 drm_gem_object_free+0x20/0x5e()
  Hardware name: ESPRIMO Mobile V5505
  Modules linked in: snd_pcm_oss snd_mixer_oss snd_seq snd_seq_device
  Pid: 3793, comm: s2ram Not tainted 2.6.33-rc2 #4
  Call Trace:
   [<7815298e>] warn_slowpath_common+0x59/0x6b
   [<781529b3>] warn_slowpath_null+0x13/0x18
   [<78317c1a>] ? drm_gem_object_free+0x20/0x5e
   [<78317c1a>] drm_gem_object_free+0x20/0x5e
   [<78317bfa>] ? drm_gem_object_free+0x0/0x5e
   [<7829df11>] kref_put+0x38/0x45
   [<7833a5f0>] intel_init_clock_gating+0x232/0x271
   [<78317bfa>] ? drm_gem_object_free+0x0/0x5e
   [<7832c307>] i915_restore_state+0x21a/0x2b3
   [<7832379d>] i915_resume+0x3c/0xbb
   [<78174fe5>] ? trace_hardirqs_on_caller+0xfc/0x123
   [<7831c756>] ? drm_class_resume+0x0/0x3e
   [<7831c78d>] drm_class_resume+0x37/0x3e
   [<78351e0a>] legacy_resume+0x1e/0x51
   [<78351ece>] device_resume+0x91/0xab
   [<7831c756>] ? drm_class_resume+0x0/0x3e
   [<78352226>] dpm_resume+0x58/0x10f
   [<783522fb>] dpm_resume_end+0x1e/0x2c
   [<78180f80>] suspend_devices_and_enter+0x61/0x84
   [<78180ff8>] enter_state+0x55/0x83
   [<7818091c>] state_store+0x94/0xaa
   [<7829d09e>] kobj_attr_store+0x1e/0x23
   [<782098e0>] sysfs_write_file+0x66/0x99
   [<781cd2f0>] vfs_write+0x8a/0x108
   [<781cd408>] sys_write+0x3c/0x63
   [<78125c10>] sysenter_do_call+0x12/0x36
  ---[ end trace a343537f29950fda ]---

It is in fact slightly more insiduous that first appears since we are
attempting to not just free the object without the lock, but are trying
to do the whole bo manipulation without holding the lock.

Reported-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org
Signed-off-by: Eric Anholt <eric@anholt.net>

9 years agodrm/i915: fix unused var
Andrew Morton [Tue, 17 Nov 2009 22:08:52 +0000]
drm/i915: fix unused var

drivers/gpu/drm/i915/i915_dma.c: In function 'i915_driver_load':
drivers/gpu/drm/i915/i915_dma.c:1114: warning: 'll_base' may be used uninitialized in this function

Partly this is because gcc isn't smart enough.  But `ll_base' does get used
uninitialised in the DRM_DEBUG() call.

Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Eric Anholt <eric@anholt.net>
Cc: Dave Airlie <airlied@linux.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Eric Anholt <eric@anholt.net>

9 years agodrm/i915: Storage class should be before const qualifier
Tobias Klauser [Wed, 23 Dec 2009 13:14:34 +0000]
drm/i915: Storage class should be before const qualifier

The C99 specification states in section 6.11.5:

The placement of a storage-class specifier other than at the beginning
of the declaration specifiers in a declaration is an obsolescent
feature.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Eric Anholt <eric@anholt.net>

9 years agodrm/i915: remove render reclock support
Jesse Barnes [Thu, 17 Dec 2009 19:11:13 +0000]
drm/i915: remove render reclock support

This code generally fails to adjust the render clock, and when it does,
it conflicts with some other register settings and can cause problems.

So remove this code altogether.  I'm reworking it now to do the right
thing, but the only bit it will share is the VBT check for whether
reclocking is supported, so I'm leaving that bit.

Reverts most of 652c393a3368af84359da37c45afc35a91144960 ("add dynamic
clock frequency control"), though for many the regressions showed up
in the later 181a5336d6cc836f05507410d66988c483ad0154 ("Fix render
reclock availability detection").

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>

9 years agodrm/i915: Fix RC6 suspend/resume
Andrew Lutomirski [Mon, 21 Dec 2009 15:10:22 +0000]
drm/i915: Fix RC6 suspend/resume

We restored RC6 twice on resume, even with modesetting off.  Instead,
only restore it once and skip RC6 initialization entirely in non-KMS mode.

Signed-off-by: Andy Lutomirski <luto@mit.edu>
Tested-by: Jeff Chua <jeff.chua.linux@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>

9 years agodrm/i915: execbuf2 support
Jesse Barnes [Fri, 18 Dec 2009 03:05:42 +0000]
drm/i915: execbuf2 support

This patch adds a new execbuf ioctl, execbuf2, for use by clients that
want to control fence register allocation more finely.  The buffer
passed in to the new ioctl includes a new relocation type to indicate
whether a given object needs a fence register assigned for the command
buffer in question.

Compatibility with the existing execbuf ioctl is implemented in terms
of the new code, preserving the assumption that fence registers are
required for pre-965 rendering commands.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
[ickle: Remove pre-emptive clear_fence_reg()]
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
[anholt: Removed dmesg spam]
Signed-off-by: Eric Anholt <eric@anholt.net>

9 years agoDaVinci: DM365: Add the device_enable for the DaVinci Keyscan
Miguel Aguilar [Fri, 13 Nov 2009 19:44:23 +0000]
DaVinci: DM365: Add the device_enable for the DaVinci Keyscan

Adds the device_enable function to the DaVinci Keyscan platform data
to setup the PINMUX configuration.

It also removes #ifdef from the DM365 EVM board in order to load it
properly as a module.

Signed-off-by: Miguel Aguilar <miguel.aguilar@ridgerun.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

9 years agodavinci: enable ARCH_HAS_HOLES_MEMORYMODEL for DaVinci
Sekhar Nori [Thu, 19 Nov 2009 10:04:01 +0000]
davinci: enable ARCH_HAS_HOLES_MEMORYMODEL for DaVinci

All DaVinci platforms include a DSP or co-processor for
audio/video acceleration.

While creating memory for the DSP/co-processor, system
integrator can end up creating a hole in the memory map
of the sort:

<kernel memory> <hole (memory for DSP)> <kernel memory>

This sort of configuration needs ARCH_HAS_HOLES_MEMORYMODEL
enabled. See further details see this discussion on ARM
linux mailing list:
http://www.mail-archive.com/linux-omap@vger.kernel.org/msg15262.html

The patch is boot tested on OMAP-L138, DM6446 and DM355 EVMs

Signed-off-by: Sekhar Nori <nsekhar@ti.com>
CC: Sriramakrishnan <srk@ti.com>
CC: Khasim Syed Mohammed <khasim@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

9 years agodavinci: da8xx/omap-l1: mark RTC as a wakeup source
Sekhar Nori [Mon, 16 Nov 2009 11:51:31 +0000]
davinci: da8xx/omap-l1: mark RTC as a wakeup source

On da850, RTC alarm is a wakeup source from deep sleep.
Mark it as a wakeup source after the rtc platform device
is registered.

Without this patch, the rtc-omap driver suspends the RTC
during the suspend sequence and hence it cannot wakeup the
SoC.

Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

9 years agodavinci: cp_intc: provide set_wake function
Sekhar Nori [Mon, 16 Nov 2009 11:51:30 +0000]
davinci: cp_intc: provide set_wake function

There is nothing special to be done for interrupts
which can wakeup the device from sleep on CP-INTC,
but not having a set_wake implemented prevents use
of common drivers which expect this function to be
implemented for all wakeup interrupt sources.

This patch fixes the issue encountered when using the
omap-rtc driver on DA850. On DA850 the RTC alarm
interrupt is used to wake up the SoC from deep sleep
mode. Without this patch, the disable_irq_wake throws
an unbalanced wake disable warning while resuming
because the previous enable call fails for lack of
set_wake implementation.

Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

9 years agoDavinci VPFE Capture: Take i2c adapter id through platform data
Vaibhav Hiremath [Tue, 13 Oct 2009 15:08:54 +0000]
Davinci VPFE Capture: Take i2c adapter id through platform data

The I2C adapter ID is actually depends on Board and may vary, Davinci
uses id=1, but in case of AM3517 id=3.

So modified respective davinci board files.

Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

9 years agoMerge branch 'for-linus' of git://git.open-osd.org/linux-open-osd
Linus Torvalds [Wed, 6 Jan 2010 09:41:07 +0000]
Merge branch 'for-linus' of git://git.open-osd.org/linux-open-osd

* 'for-linus' of git://git.open-osd.org/linux-open-osd:
  exofs: simple_write_end does not mark_inode_dirty
  exofs: fix pnfs_osd re-definitions in pre-pnfs trees

9 years agoMerge master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Wed, 6 Jan 2010 09:16:26 +0000]
Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm: (22 commits)
  ARM: 5865/1: nuc900 ethernet driver needs mii
  ARM: 5864/1: Implement arch_reset() in NUC900
  ARM: 5863/1: fix bugs of clock source of NUC900
  ARM: 5858/1: Remove unused vma_vm_flags macro from v7wbi_flush_user_tlb_range
  imx/mx3: depend on USB_ULPI for otg_ulpi_create
  ARM: MX3: make CPU revision number detection work on all boards
  mx25: pdk: add platform code for FEC support
  mx25: add support for FEC on i.MX25
  mx25: s/NO_PAD_CTL/NO_PAD_CTRL/
  mx31moboard: fix usbh device names
  mx3: add support for the mt9v022 camera sensor to pcm037 platform
  mx27: mxt_td60: Remove not used UART pins
  [ARM] pxa/poodle: fix incorrect 'gpio_card_detect' of MMC
  [ARM] pxa/zylonite: simplify reduntant gpio settings on mmc slot
  [ARM] pxa/ttc_dkb: remove duplicate macro definition
  [ARM] pxa/zeus: provide power-source information when APM is enabled
  [ARM] pxa/zeus: relax memory timings on Zeus ethernet ports
  [ARM] pxa/zeus: make internal zeus_get_pcb_info static
  [ARM] pxa/littleton: select CPU_PXA300 and CPU_PXA310
  [ARM] pxa/littleton: add UART3 GPIO config
  ...

9 years agomodules: Skip empty sections when exporting section notes
Ben Hutchings [Sat, 19 Dec 2009 14:43:01 +0000]
modules: Skip empty sections when exporting section notes

Commit 35dead4 "modules: don't export section names of empty sections
via sysfs" changed the set of sections that have attributes, but did
not change the iteration over these attributes in add_notes_attrs().
This can lead to add_notes_attrs() creating attributes with the wrong
names or with null name pointers.

Introduce a sect_empty() function and use it in both add_sect_attrs()
and add_notes_attrs().

Reported-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Tested-by: Martin Michlmayr <tbm@cyrius.com>
Cc: stable@kernel.org
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agodrm/radeon/kms: add missing breaks in i2c and ss lookups
Alex Deucher [Mon, 28 Dec 2009 18:45:23 +0000]
drm/radeon/kms: add missing breaks in i2c and ss lookups

Should fix fdo bug 25741

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms: add primary dac adj values table
Alex Deucher [Tue, 29 Dec 2009 17:09:17 +0000]
drm/radeon/kms: add primary dac adj values table

Look up primary dac adj values from the table if
there is no bios or bios dac table to reference.

The lookup table may need to be adjusted for certain
families.

Should fix kernel bug 14945.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms: fallback to default connector table
Alex Deucher [Tue, 5 Jan 2010 00:12:02 +0000]
drm/radeon/kms: fallback to default connector table

if necessary for combios

Some early combios radeon cards don't have a connector
table or dac table in the bios, if they do not, fallback
to the default tables.

Should fix kernel bug 14963.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agoLinux 2.6.33-rc3
Linus Torvalds [Wed, 6 Jan 2010 00:02:46 +0000]
Linux 2.6.33-rc3

9 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6
Linus Torvalds [Wed, 6 Jan 2010 00:01:58 +0000]
Merge git://git./linux/kernel/git/davem/sparc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc64: Fix Niagara2 perf event handling.
  sparc64: Fix NMI programming when perf events are active.
  bbc_envctrl: Clean up properly if kthread_run() fails.

9 years agoRevert "x86: Side-step lguest problem by only building cmpxchg8b_emu for pre-Pentium"
Rusty Russell [Tue, 5 Jan 2010 02:18:49 +0000]
Revert "x86: Side-step lguest problem by only building cmpxchg8b_emu for pre-Pentium"

This reverts commit ae1b22f6e46c03cede7cea234d0bf2253b4261cf.

As Linus said in 982d007a6ee: "There was something really messy about
cmpxchg8b and clone CPU's, so if you enable it on other CPUs later, do it
carefully."

This breaks lguest for those configs, but we can fix that by emulating
if we have to.

Fixes: http://bugzilla.kernel.org/show_bug.cgi?id=14884
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoMerge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec...
Linus Torvalds [Wed, 6 Jan 2010 00:01:04 +0000]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/jlbec/ocfs2

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2:
  ocfs2: Handle O_DIRECT when writing to a refcounted cluster.

9 years agoMerge branch 'for-2.6.33' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie...
Linus Torvalds [Tue, 5 Jan 2010 23:59:56 +0000]
Merge branch 'for-2.6.33' of git://git./linux/kernel/git/broonie/sound-2.6

* 'for-2.6.33' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6:
  ASoC: fixup oops in generic AC97 codec glue
  ASoC: fix params_rate() macro use in several codecs
  ASoC: fsi-ak4642: Remove ak4642_add_i2c_device

9 years agoARM: 5865/1: nuc900 ethernet driver needs mii
Li Jie [Thu, 31 Dec 2009 15:03:16 +0000]
ARM: 5865/1: nuc900 ethernet driver needs mii

nuc900 ethernet driver uses mii_xx_xx serials api, so mii module should be selected.

Signed-off-by: lijie <eltshanli@gmail.com>
Acked-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

9 years agoARM: 5864/1: Implement arch_reset() in NUC900
Li Jie [Thu, 31 Dec 2009 14:50:02 +0000]
ARM: 5864/1: Implement arch_reset() in NUC900

Implement arch_reset(), reboot from shell become possible.

Signed-off-by: lijie <eltshanli@gmail.com>
Acked-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

9 years agoARM: 5863/1: fix bugs of clock source of NUC900
Li Jie [Thu, 31 Dec 2009 14:57:53 +0000]
ARM: 5863/1: fix bugs of clock source of NUC900

This patch fix following bugs:

1. typo error, CLOCK_EVT_MODE_PERIODIC -> CLOCK_EVT_FEAT_PERIODIC
2. TCSR register of timer1 missed PRESCALE
3. timer1 should be enabled before register it to clock source.

Signed-off-by: lijie <eltshanli@gmail.com>
Acked-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

9 years agoARM: 5858/1: Remove unused vma_vm_flags macro from v7wbi_flush_user_tlb_range
Bahadir Balban [Fri, 25 Dec 2009 13:25:48 +0000]
ARM: 5858/1: Remove unused vma_vm_flags macro from v7wbi_flush_user_tlb_range

Signed-off-by: Bahadir Balban <bbalban@b-labs.co.uk>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

9 years agosparc64: Fix Niagara2 perf event handling.
David S. Miller [Tue, 5 Jan 2010 07:16:03 +0000]
sparc64: Fix Niagara2 perf event handling.

For chips like Niagara2 that have true overflow indications
in the %pcr (which we don't actually need and don't use)
the interrupt signal persists until the overflow bits are
cleared by an explicit %pcr write.

Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoexofs: simple_write_end does not mark_inode_dirty
Boaz Harrosh [Sun, 27 Dec 2009 15:01:42 +0000]
exofs: simple_write_end does not mark_inode_dirty

exofs uses simple_write_end() for it's .write_end handler. But
it is not enough because simple_write_end() does not call
mark_inode_dirty() when it extends i_size. So even if we do
call mark_inode_dirty at beginning of write out, with a very
long IO and a saturated system we might get the .write_inode()
called while still extend-writing to file and miss out on the last
i_size updates.

So override .write_end, call simple_write_end(), and afterwords if
i_size was changed call mark_inode_dirty().

It stands to logic that since simple_write_end() was the one extending
i_size it should also call mark_inode_dirty(). But it looks like all
users of simple_write_end() are memory-bound pseudo filesystems, who
could careless about mark_inode_dirty(). I might submit a
warning-comment patch to simple_write_end() in future.

CC: Stable <stable@kernel.org>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>

9 years agoexofs: fix pnfs_osd re-definitions in pre-pnfs trees
Boaz Harrosh [Mon, 21 Dec 2009 14:36:23 +0000]
exofs: fix pnfs_osd re-definitions in pre-pnfs trees

Some on disk exofs constants and types are defined in the pnfs_osd_xdr.h
file. Since we needed these types before the pnfs-objects code was
accepted to mainline we duplicated the minimal needed definitions into
an exofs local header. The definitions where conditionally included
depending on !CONFIG_PNFS defined. So if PNFS was present in the tree
definitions are taken from there and if not they are defined locally.

That was all good but, the CONFIG_PNFS is planed to be included upstream
before the pnfs-objects is also included. (The first pnfs batch might be
pnfs-files only)

So condition exofs local definitions on the absence of pnfs_osd_xdr.h
inclusion (__PNFS_OSD_XDR_H__ not defined). User code must make sure
that in future pnfs_osd_xdr.h will be included before fs/exofs/pnfs.h,
which happens to be so in current code.

Once pnfs-objects hits mainline, exofs's local header will be removed.

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>

9 years agosparc64: Fix NMI programming when perf events are active.
David S. Miller [Mon, 4 Jan 2010 23:37:04 +0000]
sparc64: Fix NMI programming when perf events are active.

If perf events are active, we should not reset the %pcr to
PCR_PIC_PRIV.  That perf events code does the management.

Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoMerge branch 'master' of /home/davem/src/GIT/linux-2.6/
David S. Miller [Mon, 4 Jan 2010 23:33:22 +0000]
Merge branch 'master' of /home/davem/src/GIT/linux-2.6/

9 years agobbc_envctrl: Clean up properly if kthread_run() fails.
David S. Miller [Mon, 4 Jan 2010 23:31:10 +0000]
bbc_envctrl: Clean up properly if kthread_run() fails.

In bbc_envctrl_init() we have to unlink the fan and temp instances
from the lists because our caller is going to free up the 'bp' object
if we return an error.

We can't rely upon bbc_envctrl_cleanup() to do this work for us in
this case.

Reported-by: Patrick Finnegan <pat@computer-refuge.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoMerge branch 'limits_cleanup' of git://decibel.fi.muni.cz/~xslaby/linux
Linus Torvalds [Mon, 4 Jan 2010 20:36:54 +0000]
Merge branch 'limits_cleanup' of git://decibel.fi.muni.cz/~xslaby/linux

* 'limits_cleanup' of git://decibel.fi.muni.cz/~xslaby/linux:
  resource: add helpers for fetching rlimits
  resource: move kernel function inside __KERNEL__
  SECURITY: selinux, fix update_rlimit_cpu parameter

9 years agoMerge branch 'for-linus/samsung' of git://git.fluff.org/bjdooks/linux
Linus Torvalds [Mon, 4 Jan 2010 20:35:18 +0000]
Merge branch 'for-linus/samsung' of git://git.fluff.org/bjdooks/linux

* 'for-linus/samsung' of git://git.fluff.org/bjdooks/linux:
  ARM: S3C: Fix NAND device registration by s3c_nand_set_platdata().
  ARM: S3C24XX: touchscreen device definition
  ARM: mach-bast: add NAND_SCAN_SILENT_NODEV to optional devices
  ARM: mach-osiris: add NAND_SCAN_SILENT_NODEV to optional devices
  ARM: S3C24XX: touchscreen device definition

9 years agosysfs: Add lockdep annotations for the sysfs active reference
Eric W. Biederman [Sat, 2 Jan 2010 21:37:12 +0000]
sysfs: Add lockdep annotations for the sysfs active reference

Holding locks over device_del -> kobject_del -> sysfs_deactivate can
cause deadlocks if those same locks are grabbed in sysfs show or store
methods.

The I model s_active count + completion as a sleeping read/write lock.
I describe to lockdep sysfs_get_active as a read_trylock,
sysfs_put_active as a read_unlock, and sysfs_deactivate as a
write_lock and write_unlock pair.  This seems to capture the essence
for purposes of finding deadlocks, and in my testing gives finds real
issues and ignores non-issues.

This brings us back to holding locks over kobject_del is a problem
that ideally we should find a way of addressing, but at least lockdep
can tell us about the problems instead of requiring developers to debug
rare strange system deadlocks, that happen when sysfs files are removed
while being written to.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agolguest: fix bug in setting guest GDT entry
Rusty Russell [Mon, 4 Jan 2010 08:56:14 +0000]
lguest: fix bug in setting guest GDT entry

We kill the guest, but then we blatt random stuff.

Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoMerge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6
Linus Torvalds [Mon, 4 Jan 2010 20:32:42 +0000]
Merge branch 'for-linus' of git://git390.marist.edu/linux-2.6

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
  [S390] Update default configuration.
  [S390] Have param.h simply include <asm-generic/param.h>.
  [S390] qdio: convert global statistics to per-device stats

9 years agoMerge branch 'sh/for-2.6.33' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal...
Linus Torvalds [Mon, 4 Jan 2010 20:32:09 +0000]
Merge branch 'sh/for-2.6.33' of git://git./linux/kernel/git/lethal/sh-2.6

* 'sh/for-2.6.33' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  binfmt_elf_fdpic: Fix build breakage introduced by coredump changes.
  sh: update defconfigs.
  sh: Don't default enable PMB support.
  sh: Disable PMB for SH4AL-DSP CPUs.
  sh: Only provide a PCLK definition for legacy CPG CPUs.

9 years agoMerge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Linus Torvalds [Mon, 4 Jan 2010 20:31:52 +0000]
Merge branch 'for_linus' of git://git./linux/kernel/git/tytso/ext4

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: Calculate metadata requirements more accurately
  ext4: Fix accounting of reserved metadata blocks

9 years agotosh: Use non bkl ioctl
Alan Cox [Mon, 4 Jan 2010 16:19:55 +0000]
tosh: Use non bkl ioctl

We wrap the smm calls and other bits with the BKL push down as a
precaution but they can probably go

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoi2o: propogate the BKL down into the ioctl method
Alan Cox [Mon, 4 Jan 2010 16:18:27 +0000]
i2o: propogate the BKL down into the ioctl method

Nobody seems to want to own I2O patches so sending this one directly.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agosony_pi: Remove the BKL from open and ioctl
John Kacur [Sun, 18 Oct 2009 21:49:49 +0000]
sony_pi: Remove the BKL from open and ioctl

The BKL is in this function because of the BKL pushdown (see commit
f8f2c79d594463427f7114cedb1555110d547d89)

It is not needed here because the mutex_lock sonypi_device.lock provides
the necessary locking.

sonypi_misc_ioctl can be converted to unlocked ioctls since it relies on
its own locking (the mutex sonypi_device.lock) and not the bkl

Document that llseek is not needed by explictly setting it to no_llseek

LKML-Reference: <alpine.LFD.2.00.0910192019420.3563@localhost.localdomain>
Signed-off-by: John Kacur <jkacur@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke...
Linus Torvalds [Mon, 4 Jan 2010 20:28:26 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/ryusuke/nilfs2

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2:
  nilfs2: update mailing list address
  nilfs2: Storage class should be before const qualifier
  nilfs2: trivial coding style fix

9 years agoASoC: fixup oops in generic AC97 codec glue
Manuel Lauss [Mon, 4 Jan 2010 15:29:49 +0000]
ASoC: fixup oops in generic AC97 codec glue

Initialize the glue by calling snd_soc_new_ac97_codec() as is done
in other ASoC AC97 codecs.  Fixes an oops caused by dereferencing
uninitialized members in snd_soc_new_pcms().

Run-tested on Au1250.

Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

9 years ago[SCSI] lpfc 8.3.7: Update Driver version to 8.3.7
James Smart [Mon, 21 Dec 2009 22:03:47 +0000]
[SCSI] lpfc 8.3.7: Update Driver version to 8.3.7

Update Driver version to 8.3.7

Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

9 years ago[SCSI] lpfc 8.3.7: Fix discovery failures.
James Smart [Mon, 21 Dec 2009 22:03:15 +0000]
[SCSI] lpfc 8.3.7: Fix discovery failures.

Fix discovery failures:
- Move all accesses to the fc_flag field inside the host lock.
- Restore link state after going through linkdown processing for FCF DEAD event.

Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

9 years ago[SCSI] lpfc 8.3.7: Fix SCSI protocol related errors.
James Smart [Mon, 21 Dec 2009 22:02:51 +0000]
[SCSI] lpfc 8.3.7: Fix SCSI protocol related errors.

Fix SCSI protocol related errors:
- Avoid I/O failures during EEH and HBA/CNA reset by correcting when
  we block the targets on the adapter.

Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

9 years ago[SCSI] lpfc 8.3.7: Fix hardware/SLI relates issues
James Smart [Mon, 21 Dec 2009 22:02:28 +0000]
[SCSI] lpfc 8.3.7: Fix hardware/SLI relates issues

Fix hardware/SLI relates issues:
- Fix CNA uses more than one EQ when in INTx interrupt mode.
- Fix driver tries to process failed read FCF record mailbox request.
- Fix allocating single receive buffer breaks FCoE receive queue.
- Support new read FCF record mailbox error case.

Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

9 years ago[SCSI] lpfc 8.3.7: Fix NPIV operation errors
James Smart [Mon, 21 Dec 2009 22:02:00 +0000]
[SCSI] lpfc 8.3.7: Fix NPIV operation errors

Fix NPIV operation errors:
- Fix vport not logging out of fabric when being deleted
- Fix vport fails to discover targets after devloss timeout.

Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

9 years ago[SCSI] lpfc 8.3.7: Fix FC protocol errors
James Smart [Mon, 21 Dec 2009 22:01:23 +0000]
[SCSI] lpfc 8.3.7: Fix FC protocol errors

Fix FC protocol errors:
- Fix multi-frame unsolicited sequences not queued properly
- Fix frames for unsolicited sequences not being associated with sequence.
- Fix unsolicited frame buffer sizes are not set properly
- Fix Sequence count for unsolicited frame headers not byte swapped.
- Fix Multi-frame sequence response frames go to wrong DID.

Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

9 years ago[SCSI] stex: fix scan of nonexistent lun
Ed Lin [Sat, 19 Dec 2009 01:34:51 +0000]
[SCSI] stex: fix scan of nonexistent lun

During a manual scan, a user can send command to a nonexistent
lun, precisely at the point of max_lun. Normally it's possible
(but not required) that the firmware has the knowledge that it
is an invalid lun. In the particular case when max_lun is 256,
however, the nonexistent lun 256 will be confused with lun 0,
because the lun member in a request message is only u8, and 256
will become 0. So we need to fix the problem, at least, at the
driver level.

Signed-off-by: Ed Lin <ed.lin@promise.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

9 years agoMerge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6
Russell King [Mon, 4 Jan 2010 15:51:38 +0000]
Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6

9 years agoimx/mx3: depend on USB_ULPI for otg_ulpi_create
Uwe Kleine-König [Tue, 22 Dec 2009 16:31:05 +0000]
imx/mx3: depend on USB_ULPI for otg_ulpi_create

otg_ulpi_create is defined in drivers/usb/otg/ulpi.c which depends on
CONFIG_USB_ULPI.  So protect its usage by the same symbol.  Moreover
mxc_ulpi_access_ops needs CONFIG_MXC_ULPI.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Valentin Longchamp <valentin.longchamp@epfl.ch>
Cc: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

9 years agoARM: MX3: make CPU revision number detection work on all boards
Wolfgang Denk [Mon, 14 Dec 2009 23:27:42 +0000]
ARM: MX3: make CPU revision number detection work on all boards

Commit 52939c03 (ARM: MX3: fix CPU revision number detection) started
using the CPU's SREV register for revision number detection. This
makes it mandatory to have a valid SPBA0 mapping. Add this to the
global map_io code instead of adding multiple copies for each board.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Daniel Mack <daniel@caiaq.de>
Cc: Sascha Hauer <s.hauer@pengutronix.de>

Tested on Qong (EVB-Lite)
Tested-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

9 years agomx25: pdk: add platform code for FEC support
Baruch Siach [Mon, 21 Dec 2009 11:44:32 +0000]
mx25: pdk: add platform code for FEC support

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

9 years agomx25: add support for FEC on i.MX25
Baruch Siach [Mon, 21 Dec 2009 11:44:31 +0000]
mx25: add support for FEC on i.MX25

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

9 years agomx25: s/NO_PAD_CTL/NO_PAD_CTRL/
Baruch Siach [Mon, 14 Dec 2009 10:19:39 +0000]
mx25: s/NO_PAD_CTL/NO_PAD_CTRL/

NO_PAD_CTL is not defined anywhere.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

9 years agomx31moboard: fix usbh device names
Valentin Longchamp [Fri, 4 Dec 2009 15:50:29 +0000]
mx31moboard: fix usbh device names

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

9 years agomx3: add support for the mt9v022 camera sensor to pcm037 platform
Guennadi Liakhovetski [Fri, 11 Dec 2009 13:29:06 +0000]
mx3: add support for the mt9v022 camera sensor to pcm037 platform

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

9 years agomx27: mxt_td60: Remove not used UART pins
Alan Carvalho de Assis [Fri, 4 Dec 2009 17:44:06 +0000]
mx27: mxt_td60: Remove not used UART pins

Signed-off-by: Alan Carvalho de Assis <acassis@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

9 years agoresource: add helpers for fetching rlimits
Jiri Slaby [Thu, 19 Nov 2009 16:16:37 +0000]
resource: add helpers for fetching rlimits

We want to be sure that compiler fetches the limit variable only
once, so add helpers for fetching current and maximal resource
limits which do that.

Add them to sched.h (instead of resource.h) due to circular dependency
 sched.h->resource.h->task_struct
Alternative would be to create a separate res_access.h or similar.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: James Morris <jmorris@namei.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ingo Molnar <mingo@elte.hu>

9 years agoresource: move kernel function inside __KERNEL__
Jiri Slaby [Fri, 20 Nov 2009 13:16:33 +0000]
resource: move kernel function inside __KERNEL__

It is an internal function. Move it inside __KERNEL__ ifdef, along
with task_struct declaration.

Then we get:
--- /usr/include/linux/resource.h       2009-09-14 15:09:29.000000000 +0200
+++ usr/include/linux/resource.h       2010-01-04 11:30:54.000000000 +0100
@@ -3,8 +3,6 @@

 #include <linux/time.h>

-struct task_struct;
-
 /*
  * Resource control/accounting header file for linux
  */
@@ -70,6 +68,5 @@
  */
 #include <asm/resource.h>

-int getrusage(struct task_struct *p, int who, struct rusage *ru);

 #endif

***********

include/linux/Kbuild is untouched, since unifdef is run even on
headers-y nowadays.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>

9 years agoSECURITY: selinux, fix update_rlimit_cpu parameter
Jiri Slaby [Fri, 28 Aug 2009 08:47:16 +0000]
SECURITY: selinux, fix update_rlimit_cpu parameter

Don't pass current RLIMIT_RTTIME to update_rlimit_cpu() in
selinux_bprm_committing_creds, since update_rlimit_cpu expects
RLIMIT_CPU limit.

Use proper rlim[RLIMIT_CPU].rlim_cur instead to fix that.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Acked-by: James Morris <jmorris@namei.org>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: Eric Paris <eparis@parisplace.org>
Cc: David Howells <dhowells@redhat.com>

9 years ago[S390] Update default configuration.
Martin Schwidefsky [Mon, 4 Jan 2010 08:05:44 +0000]
[S390] Update default configuration.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

9 years ago[S390] Have param.h simply include <asm-generic/param.h>.
Robert P. J. Day [Mon, 4 Jan 2010 08:05:43 +0000]
[S390] Have param.h simply include <asm-generic/param.h>.

Since the files have identical content, might as well simplify.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

9 years ago[S390] qdio: convert global statistics to per-device stats
Jan Glauber [Mon, 4 Jan 2010 08:05:42 +0000]
[S390] qdio: convert global statistics to per-device stats

Revamp the qdio performance statistics and move them from procfs to
debugfs using the seq_file interface. Since the statistics are not
intended for the general user the removal of /proc/qdio_perf should
not surprise anyone.

The per device statistics are disabled by default, writing 1 to
/<debugfs mountpoint>/qdio/<device bus ID>/statistics enables the
statistics for the given device.

Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>