9 years agoALSA: hda - Add missing hp_pins definitions for ALC269 quirks
Takashi Iwai [Tue, 2 Mar 2010 10:14:01 +0000]
ALSA: hda - Add missing hp_pins definitions for ALC269 quirks

In 2.6.33 ACL269 unsol event handler was changed to look up the pre-defined
pins, but the headphone pins aren't defined properly in each quirk.
This patch adds the missing definitions, and fixes the speaker auto-mute
regression on some ASUS (and possibly other) laptops.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: <stable@kernel.org>

9 years agoALSA: hda - Add/fix ALC269 FSC and Quanta models
Kailang Yang [Thu, 25 Feb 2010 07:49:06 +0000]
ALSA: hda - Add/fix ALC269 FSC and Quanta models

Specify proper quirk models for FSC and Quanta machines with ALC269 codec.

Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

9 years agoALSA: hda - Add ALC670 codec support
Kailang Yang [Thu, 25 Feb 2010 07:36:52 +0000]
ALSA: hda - Add ALC670 codec support

- Fixed alc_subsystem_id( ) typo and add new function.
   - !(ass & 0x100000)) ==> Delete this check. It is unnecessary check.
   - Add porti
- ALC670 support

Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

9 years agoALSA: hda - remove unnecessary msleep on power state transitions
Zhang, Rui [Wed, 24 Feb 2010 01:38:49 +0000]
ALSA: hda - remove unnecessary msleep on power state transitions

This will save ~15ms boot time.

The first 10ms sleep was introduced in commit d2595d86e5 for (buggy)
Cxt codecs, so better to limit the sleep to the problem hardware.

For the second 10ms sleep, the HDA spec says:

Power State[1:0]:
00: Node Power state (D0) is fully on.
01: Node Power state (D1) allows for (does not require) the lowest possible power consuming state from which it
can return to the "fully on" state (D0) within 10 ms, excepting analog pass through circuits (e.g., CD analog
playback) which must remain fully on.
10: Node Power state (D2) allows for (does not require) the lowest possible power consuming state from which it
can return to the "fully on" state (D0) within 10 ms. For modems, this is the "wake on ring" power state.
11: Node Power state (D3) allows for (does not require) lowest possible power consuming state under software
control. Note that any low power state set by software must retain sufficient operational capability to properly
respond to subsequent software Power State command.

So 10ms is actually the max wait time. It should be safe to
remove/reduce it and rely on the loop of 1ms-sleeps.

CC: Marc Boucher <marc@linuxant.com>
CC: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

9 years agoALSA: hda - Add missing description in HD-Audio-Models.txt
Takashi Iwai [Tue, 23 Feb 2010 09:55:46 +0000]
ALSA: hda - Add missing description in HD-Audio-Models.txt

Signed-off-by: Takashi Iwai <tiwai@suse.de>

9 years agoALSA: add support for Macbook Air 2,1 internal speaker
Reimundo Heluani [Tue, 23 Feb 2010 09:19:51 +0000]
ALSA: add support for Macbook Air 2,1 internal speaker

Add support for Macbook Air 2,1 (late 2008) internal speaker and
headphones. Create a "mba21" model for snd-hda-intel.

Signed-off-by: Reimundo Heluani <rheluani@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

9 years agoALSA: hda - enable snoop for Intel Cougar Point
Seth Heasley [Tue, 23 Feb 2010 01:31:09 +0000]
ALSA: hda - enable snoop for Intel Cougar Point

This patch enables snoop, eliminating static during playback.
This patch supersedes the previous Cougar Point audio patch.

Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

9 years agoALSA: hda - Remove identical definitions for macmini3 model
Takashi Iwai [Tue, 23 Feb 2010 07:07:15 +0000]
ALSA: hda - Remove identical definitions for macmini3 model

The channel mode definitions for macmini3 model are identical with mb5.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

9 years agoALSA: hda-intel: Add position_fix quirk for ASUS M2V-MX SE.
Paul Menzel [Mon, 8 Feb 2010 19:42:46 +0000]
ALSA: hda-intel: Add position_fix quirk for ASUS M2V-MX SE.

With PulseAudio and an application accessing an input device like `gnome-volume-manager` both have high CPU load as reported in [1].

Loading `snd-hda-intel` with `position_fix=1` fixes this issue. Therefore add a quirk for ASUS M2V-MX SE.

The only downside is, when now exiting for example MPlayer when it is playing an audio file a high pitched sound is outputted by the speaker.

$ lspci -vvnn | grep -A10 Audio
20:01.0 Audio device [0403]: VIA Technologies, Inc. VT1708/A [Azalia HDAC] (VIA High Definition Audio Controller) [1106:3288] (rev 10)
Subsystem: ASUSTeK Computer Inc. Device [1043:8290]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at fbffc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel

[1] http://sourceforge.net/mailarchive/forum.php?thread_name=1265550675.4642.24.camel%40mattotaupa&forum_name=alsa-user

Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

9 years agoALSA: Typo. s/distrubs/disturbs/
Paul Menzel [Mon, 8 Feb 2010 19:37:26 +0000]
ALSA: Typo. s/distrubs/disturbs/

Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

9 years agoALSA: hda - Clean up Intel Mac unsol codes
Takashi Iwai [Mon, 22 Feb 2010 07:34:40 +0000]
ALSA: hda - Clean up Intel Mac unsol codes

Use the standard unsol_event callback with each setup callback for
IntelMac models with Realtek ALC885 codecs.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

9 years agoALSA: hda - Add Macmini 3,1 support
Luke Yelavich [Fri, 12 Feb 2010 05:28:29 +0000]
ALSA: hda - Add Macmini 3,1 support

BugLink: https://bugs.edge.launchpad.net/ubuntu/+source/linux/+bug/343989

Add a model quirk for the NVIDIA based Macmini hardware, aka Macmini 3,1. The
pinout is almost identical to the mb5 quirk, except for no microphone and
the line-in mixer controls being on a different index. Everything works in
2ch mode, but as I am not sure what needs to be changed for 6ch mode, or
whether the Mac Mini's chip supports 6ch mode, I have simply duplicated
the code from the mb5 quirk for the mac mini chmode management. The new
model parameter for this quirk is "macmini3".

Signed-off-by: Luke Yelavich <luke.yelavich@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

9 years agoALSA: hda: Use 3stack quirk for Toshiba Satellite L40-10Q
Daniel T Chen [Sat, 20 Feb 2010 16:16:30 +0000]
ALSA: hda: Use 3stack quirk for Toshiba Satellite L40-10Q

BugLink: https://bugs.launchpad.net/bugs/524948

The OR has verified that the existing model=laptop-eapd quirk does not
function correctly but instead needs model=3stack.  Make this change
so that manual corrections to module-init-tools file(s) are not
required.

Reported-by: Lasse Havelund <lasse@havelund.org>
CC: <stable@kernel.org>
Signed-off-by: Daniel T Chen <crimsun@ubuntu.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

9 years agoALSA: hda - Add support for Lenovo IdeaPad U150
Greg Alexander [Sat, 13 Feb 2010 07:02:25 +0000]
ALSA: hda - Add support for Lenovo IdeaPad U150

Add patch for the Conexant 5066 HDA codec to support the Lenovo IdeaPad U150

Signed-off-by: Greg Alexander <greigs@galexander.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

9 years agoMerge branch 'fix/hda' into topic/hda
Takashi Iwai [Tue, 9 Feb 2010 20:34:18 +0000]
Merge branch 'fix/hda' into topic/hda

9 years agoALSA: hda-intel: Avoid divide by zero crash
Jody Bruchon [Sat, 6 Feb 2010 15:46:26 +0000]
ALSA: hda-intel: Avoid divide by zero crash

On my AMD780V chipset, hda_intel.c can crash the kernel with a divide by
zero
for as-yet unknown reasons. A simple check for zero prevents it, though
the problem that causes it remains. Since the workaround is harmless and
won't affect anyone except victims of this bug, it should be safe;
moreover,
because this crash can be triggered by a user-mode application, there are
denial of service implications on the systems affected by the bug without
the patch.

Signed-off-by: Jody Bruchon <jody@nctritech.com>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

9 years agoALSA: hda - Fix default polarity of mute-LED GPIO on 92HD83x/88x codecs
Takashi Iwai [Tue, 9 Feb 2010 08:25:26 +0000]
ALSA: hda - Fix default polarity of mute-LED GPIO on 92HD83x/88x codecs

The previous commit caused a regression on HP laptops with 92HD83x/88x
codecs.  The default polarity of mute-LED GPIO is inverted on these
devices.

Reference: Novell bnc#578190
https://bugzilla.novell.com/show_bug.cgi?id=578190

Signed-off-by: Takashi Iwai <tiwai@suse.de>

9 years agoALSA: hda - Remove static gpio_led setup via model
Takashi Iwai [Mon, 8 Feb 2010 14:21:09 +0000]
ALSA: hda - Remove static gpio_led setup via model

We have now a better mute-LED GPIO detection, and no need to assign the
values statically per model option.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

9 years agoALSA: hda - Merge HP mute-LED status callback on both IDT 92HD7x and 8x codecs
Takashi Iwai [Mon, 8 Feb 2010 14:16:08 +0000]
ALSA: hda - Merge HP mute-LED status callback on both IDT 92HD7x and 8x codecs

Merge the mute-LED status callback function for both IDT 92HD7x and 8x
codecs to one function.  Also it's changed to check all DACs, and called
in the initialization to sync with the current status.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

9 years agoALSA: hda - Detect HP mute-LED GPIO setup from GPIO counts
Takashi Iwai [Mon, 8 Feb 2010 14:06:13 +0000]
ALSA: hda - Detect HP mute-LED GPIO setup from GPIO counts

The GPIO pin number for the mute LED control on HP laptops can be
determined more easily by checking the number of available GPIO pins
of the codec chip.  On a small package with up to 3 GPIOs, GPIO 0 is
used while GPIO 3 is used for others.

This fixes the missing mute GPIO for some HP laptops with new codecs.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

9 years agoMerge branch 'fix/hda' into topic/hda
Takashi Iwai [Fri, 5 Feb 2010 08:09:25 +0000]
Merge branch 'fix/hda' into topic/hda

9 years agoALSA: cosmetic: make hda intel interrupt name consistent with others
Maxim Levitsky [Thu, 4 Feb 2010 20:26:37 +0000]
ALSA: cosmetic: make hda intel interrupt name consistent with others

This renames the interrupt name in /proc/interrupt.
HDA Intel -> hda_intel

This also eliminates space from the name, probably helping some
parsers.
Don't think anybody depends on this name in userspace

Signed-off-by: Takashi Iwai <tiwai@suse.de>

9 years agoALSA: hda - Delay switching to polling mode if an interrupt was missing
Maxim Levitsky [Thu, 4 Feb 2010 20:21:47 +0000]
ALSA: hda - Delay switching to polling mode if an interrupt was missing

My sound codec seems sometimes (very rarely) to omit interrupts (ALC268)
However, interrupt mode still works.
Thus if we get timeout, poll the codec once.

If we get 3 such polls in a row, then switch to polling mode.

This patch is maybe an bandaid, but this might be a workaround for hardware bug.

Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

9 years agoALSA: hda - Add support of ALC665
Kailang Yang [Thu, 4 Feb 2010 13:18:18 +0000]
ALSA: hda - Add support of ALC665

- Add support for ALC665
- Add more ASUS model
- Modify common patch for ALC272 ALC273 ALC661 ALC662 ALC663 ALC665

Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

9 years agoALSA: hda - Add ALC269VB support
Kailang Yang [Thu, 4 Feb 2010 13:16:14 +0000]
ALSA: hda - Add ALC269VB support

- Add new models ALC269VB_AMIC ALC269VB_DMIC
- Add alc269vb_laptop_dmic_setup
       The record source index Dmic is 0x6 for ALC269VB.
- Change eeepc words for ALC269
- Modify init_verb tables of patch_alc269 patch_alc662 patch_alc882
- Modify common patch for ALC270 ALC269VB ALC275

Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

9 years agoALSA: hda - Remove superfluous init verb entries for ALC88[235]
Kailang Yang [Thu, 4 Feb 2010 13:12:58 +0000]
ALSA: hda - Remove superfluous init verb entries for ALC88[235]

The default values are no need to be set in init_verbs.

Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

9 years agoALSA: hda - Fix docking output for IDT 92HD8xx codecs
Charles Chin [Thu, 4 Feb 2010 09:28:02 +0000]
ALSA: hda - Fix docking output for IDT 92HD8xx codecs

This patch fixes docking output support for IDT 92HD81/83/88 family codecs.
Typically one of ports 0xE or 0xF is used for docking output, while only
port 0xF is common on all the three codec families.  We don't want the
pin to select the analog mixer here.

Signed-off-by: Charles Chin <Charles.Chin@idt.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

9 years agoALSA: hda - Adding support for another IDT 92HD83XXX codec
Vitaliy Kulikov [Thu, 4 Feb 2010 07:58:23 +0000]
ALSA: hda - Adding support for another IDT 92HD83XXX codec

Signed-off-by: Vitaliy Kulikov <Vitaliy.Kulikov@idt.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

9 years agoALSA: hda - Add support for IDT 92HD88 family codecs
Charles Chin [Fri, 29 Jan 2010 11:05:51 +0000]
ALSA: hda - Add support for IDT 92HD88 family codecs

Signed-off-by: Charles Chin <Charles.Chin@idt.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

9 years agoALSA: hda - Add mute LED check for HP laptops with IDT 92HD83xxx codec
Vitaliy Kulikov [Thu, 28 Jan 2010 18:21:07 +0000]
ALSA: hda - Add mute LED check for HP laptops with IDT 92HD83xxx codec

This patch adds HP mute LED support for IDT 92HD81/3 family of the codecs.

Signed-off-by: Vitaliy Kulikov <Vitaliy.Kulikov@idt.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

9 years agoALSA: hda - Fix index of HP Compaq F700 mic amp
Takashi Iwai [Thu, 28 Jan 2010 16:11:45 +0000]
ALSA: hda - Fix index of HP Compaq F700 mic amp

The amp used for the mic input on HP Compaq F700 with Cxt5051 codec
has no multiple inputs, thus its index should be 0 instead of 1.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

9 years agoALSA: hda - Define max number of PCM devices in hda_codec.h
Takashi Iwai [Thu, 28 Jan 2010 16:08:53 +0000]
ALSA: hda - Define max number of PCM devices in hda_codec.h

Define the constant rather in the common header file.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

9 years agoALSA: hda - Change the AZX_MAX_PCMS to 10
Wei Ni [Thu, 28 Jan 2010 08:13:07 +0000]
ALSA: hda - Change the AZX_MAX_PCMS to 10

In hda_codec.c, it has define
"[HDA_PCM_TYPE_HDMI]  = { 3, 7, 8, 9, -1 },",
it support up to device 9 for HDMI.
But in hda_intel.c, it only define AZX_MAX_PCMS as 8.
So if it have 4 hdmi codecs, when run azx_attach_pcm_stream(),
it will show error "Invalid PCM device number 8", and "... number 9",
and return "-EINVAL".
We should change the AZX_MAX_PCMS to 10.

Signed-off-by: Wei Ni <wni@nvidia.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

9 years agoALSA: hda - Allow override more fields via patch loader
Takashi Iwai [Wed, 27 Jan 2010 23:01:53 +0000]
ALSA: hda - Allow override more fields via patch loader

Allow the override of vendor-id, subsystem-id, revision-id and chip name
via patch loading.  Updated the document, too.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

9 years agoALSA: hda - Add an ASUS mobo to MSI blacklist
Takashi Iwai [Wed, 27 Jan 2010 19:26:08 +0000]
ALSA: hda - Add an ASUS mobo to MSI blacklist

Sid Boyce reported that his machine locks up without enable_msi=0 option.
This looks like another ASUS mobo with Nvidia combo.

Reported-by: Sid Boyce <sboyce@blueyonder.co.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

9 years agoALSA: hda - Add support for more the 8 streams
Wei Ni [Tue, 26 Jan 2010 07:59:33 +0000]
ALSA: hda - Add support for more the 8 streams

In azx_stream_start() and azx_stream_stop(),
it use azx_readb/azx_writeb to read/write SIE,
it just enable/disable 8 streams.
But according to the HDA spec, it support 30 streams,
and the new HDA controller will support more then 8
streams. So we should use azx_readl/azx_writel to
read/write SIE.

Signed-off-by: Wei Ni <wni@nvidia.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

9 years agoALSA: hda - Remove the COEF setup for ALC267/ALC268
Takashi Iwai [Mon, 25 Jan 2010 14:44:11 +0000]
ALSA: hda - Remove the COEF setup for ALC267/ALC268

The COEF setup for model=auto seems problematic on some laptops,
resulting in the silent speaker output.  Better to disable it for now.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

9 years agoALSA: hda - Remove coef output in Realtek proc files
Takashi Iwai [Mon, 25 Jan 2010 14:41:11 +0000]
ALSA: hda - Remove coef output in Realtek proc files

The output of COEF index/value in the proc file for Realtek codecs is
rather useless since the value varies together with the index.
Let's get rid of it again.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

9 years agoALSA: hda - add possibility to choose speakers configuration for 4930g
Łukasz Wojniłowicz [Sun, 24 Jan 2010 13:12:37 +0000]
ALSA: hda - add possibility to choose speakers configuration for 4930g

Now one can choose speaker configuration in e.g. PulseAudio mixer

Signed-off-by: Łukasz Wojniłowicz <lukasz.wojnilowicz@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

9 years agoALSA: hda - Change headphone pin control with master volume on cx5051
Takashi Iwai [Sun, 24 Jan 2010 10:19:27 +0000]
ALSA: hda - Change headphone pin control with master volume on cx5051

The HP pin (0x16) control has to be changed dynamically depending on
the master volume switch as well as the speaker pin (0x1a).  Otherwise
the headphone still sounds with master off.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

9 years agoALSA: hda - Fix SPDIF output widget for Cxt5051 codec
Takashi Iwai [Sun, 24 Jan 2010 10:14:36 +0000]
ALSA: hda - Fix SPDIF output widget for Cxt5051 codec

Fixed the wrongly set up for SPDIF output on Conexant 5051 codec.
It must point to the audio out widget instead of a pin.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

9 years agoALSA: hda - initialize mic port on cxt5051 codec dynamically
Takashi Iwai [Sun, 24 Jan 2010 10:00:27 +0000]
ALSA: hda - initialize mic port on cxt5051 codec dynamically

Initialize the mic ports B & C on Conexant 5051 codec dynamically
according to the mic jack detection, instead of static init arrays.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

9 years agoALSA: hda - Merge playback controls for Cx5051 codec models
Takashi Iwai [Sun, 24 Jan 2010 09:47:02 +0000]
ALSA: hda - Merge playback controls for Cx5051 codec models

All cx5051 codec models have the same Master playback mixer definitions.
Merge them together.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

9 years agoALSA: hda - Add support for Toshiba Satellite M300
Takashi Iwai [Sat, 23 Jan 2010 21:31:36 +0000]
ALSA: hda - Add support for Toshiba Satellite M300

Added the support for Toshiba Satellite M300 with Conexant 5051 codec.
Since the laptop has no port C connection and the pin reports always
the jack sense true, we need to ignore port-C unsol event.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

9 years agoALSA: hda - Fix HP dv6736 capture mixer name
Takashi Iwai [Sat, 23 Jan 2010 21:29:54 +0000]
ALSA: hda - Fix HP dv6736 capture mixer name

Use the standard "Capture" mixer name for HP dv6736 with Cxt5051 codec.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

9 years agoALSA: hda - Minor fixes for Compaq Presario F700 quirk
Takashi Iwai [Sat, 23 Jan 2010 21:19:29 +0000]
ALSA: hda - Minor fixes for Compaq Presario F700 quirk

Minor fixes for HP Compaq Presario F700 quirks with Cxt5051 codec:
- changed the capture mixer elements to the standard name.
- fixed the quirk name string without a space
- sorted the quirk list
- updated the documentation

Signed-off-by: Takashi Iwai <tiwai@suse.de>

9 years agoALSA: hda - Fix HP T5735 automute
Takashi Iwai [Wed, 20 Jan 2010 07:35:06 +0000]
ALSA: hda - Fix HP T5735 automute

This patch fixes the aut-mute setup on HP T5735 with ALC262 codec.
Instead of wrong amp, use pin control toggling for muting the speaker now.

Tested-by: Lee Trager <lee.trager@hp.com>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

9 years agoMerge branch 'fix/hda' into topic/hda
Takashi Iwai [Tue, 19 Jan 2010 14:53:43 +0000]
Merge branch 'fix/hda' into topic/hda

Conflicts:
sound/pci/hda/patch_realtek.c

9 years agoALSA: hda - Turn on EAPD only if available for Realtek codecs
Takashi Iwai [Tue, 19 Jan 2010 14:46:37 +0000]
ALSA: hda - Turn on EAPD only if available for Realtek codecs

Some codecs disable widgets used for output pins and reserve as vendor-
spec widgets.  Thus we need to check the widget type and pin cap before
actually sending SET_EAPD verbs in the auto-configuration mode.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

9 years agoALSA: hda - Fix parsing pin node 0x21 on ALC259
Takashi Iwai [Tue, 19 Jan 2010 14:38:44 +0000]
ALSA: hda - Fix parsing pin node 0x21 on ALC259

ALC259 has a widget NID 0x21 for the output pin, but it wasn't handled
properly in alc268_new_analog_output().

Signed-off-by: Takashi Iwai <tiwai@suse.de>

9 years agoALSA: hda - Fix capture on Sony VAIO with single input
Takashi Iwai [Sun, 17 Jan 2010 12:09:33 +0000]
ALSA: hda - Fix capture on Sony VAIO with single input

Sony VAIO VGN-P11G with ALC262 codec has only one input pin, and the
recording doesn't work with model=auto because ALC262 parser sets the
wrong cap NIDs to choose the route and the default route for the sole
input pin wasn't initialized properly.  This patch solves these issues.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

9 years agoALSA: hda - Fix mute led GPIO on HP dv-series notebooks
Kunal Gangakhedkar [Fri, 15 Jan 2010 15:31:47 +0000]
ALSA: hda - Fix mute led GPIO on HP dv-series notebooks

On my laptop (HP dv6-1110ax), there are no OEM strings in SMBIOS of type
"HP_Mute_LED*". Hence, the GPIO for the mute button LED doesn't get set
properly. I didn't find the strings in my cousin's laptop (HP dv9500t CTO)
either.

As per the documentation of find_mute_led_gpio(), these strings occur
in HP B-series systems - so, before scanning the SMBIOS strings, we need to
check if we're dealing with a B-series system.
Need to get confirmation from HP if this logic takes care of all the
systems. I'm trying to poke a friend there.

Signed-off-by: Kunal Gangakhedkar <kunal.gangakhedkar@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

9 years agoALSA: hda - Fix missing capture mixer for ALC861/660 codecs
Takashi Iwai [Thu, 14 Jan 2010 11:39:02 +0000]
ALSA: hda - Fix missing capture mixer for ALC861/660 codecs

The capture-related mixer elements are missing with ALC861/ALC660 codecs
when quirks are present, due to missing call of set_capture_mixer().

Reference: Novell bnc#567340
http://bugzilla.novell.com/show_bug.cgi?id=567340

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: <stable@kernel.org>

9 years agoALSA: hda - Improved MacBook (Pro) 5,1 / 5,2 support
Alex Murray [Wed, 13 Jan 2010 12:45:03 +0000]
ALSA: hda - Improved MacBook (Pro) 5,1 / 5,2 support

This patch adds support for automatically muting the speakers when headphones
are inserted, as well as relabelling the headphone widgets from the
non-standard "HP" to the standard "Headphone" for the mb5 model.

Signed-off-by: Alex Murray <murray.alex@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

9 years agoALSA: hda - Fix Toshiba NB20x quirk entry
Takashi Iwai [Wed, 13 Jan 2010 16:20:08 +0000]
ALSA: hda - Fix Toshiba NB20x quirk entry

The alc664-mode4 model doesn't seem to fit with Toshiba NB205 correctly.
NB205 uses the pin 0x17 connected with the mixer 0x0f for the speaker
output, which isn't controlled by mode4 model at all.
Rather model=auto works fine as is on the latest driver, so let it back
again.

Tested-by: Nickolas Lloyd <ultrageek.lloyd@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

9 years agoALSA: hda_intel: ALSA HD Audio patch for Intel Cougar Point DeviceIDs
Seth Heasley [Wed, 13 Jan 2010 01:03:35 +0000]
ALSA: hda_intel: ALSA HD Audio patch for Intel Cougar Point DeviceIDs

This patch adds the Intel Cougar Point (PCH) HD Audio Controller DeviceIDs.

Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

9 years agoLinux 2.6.33-rc4
Linus Torvalds [Wed, 13 Jan 2010 05:15:00 +0000]
Linux 2.6.33-rc4

9 years agoMerge git://git.infradead.org/battery-2.6
Linus Torvalds [Wed, 13 Jan 2010 05:13:06 +0000]
Merge git://git.infradead.org/battery-2.6

* git://git.infradead.org/battery-2.6:
  pmu_battery: Fix battery full reporting

9 years ago[SCSI] megaraid_sas: remove sysfs poll_mode_io world writeable permissions
Bryn M. Reeves [Thu, 12 Nov 2009 18:31:54 +0000]
[SCSI] megaraid_sas: remove sysfs poll_mode_io world writeable permissions

/sys/bus/pci/drivers/megaraid_sas/poll_mode_io defaults to being
world-writable, which seems bad (letting any user affect kernel driver
behavior).

This turns off group and user write permissions, so that on typical
production systems only root can write to it.

Signed-off-by: Bryn M. Reeves <bmr@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoMerge branch 'for-linus' of git://gitorious.org/linux-omap-dss2/linux
Linus Torvalds [Wed, 13 Jan 2010 05:04:04 +0000]
Merge branch 'for-linus' of git://gitorious.org/linux-omap-dss2/linux

* 'for-linus' of git://gitorious.org/linux-omap-dss2/linux:
  OMAP: DSS2: OMAPFB: fix crash when panel driver was not loaded
  OMAP: DSS2: Reject scaling settings when they cannot be supported
  OMAP: DSS2: Make check-delay-loops consistent
  OMAP: DSS2: OMAPFB: fix omapfb_free_fbmem()
  video/omap: add __init/__exit macros to drivers/video/omap/lcd_htcherald.c
  OMAP: DSS2: Fix compile warning
  MAINTAINERS: Combine DSS2 and OMAPFB2 into one entry
  MAINTAINERS: change omapfb maintainer
  OMAP: OMAPFB: add dummy release function for omapdss
  OMAP: OMAPFB: fix clk_get for RFBI
  OMAP: DSS2: RFBI: convert to new kfifo API
  OMAP: DSS2: Fix crash when panel doesn't define enable_te()
  OMAP: DSS2: Collect interrupt statistics
  OMAP: DSS2: DSI: print debug DCS cmd in hex
  OMAP: DSS2: DSI: fix VC channels in send_short and send_null

9 years agolib: Introduce generic list_sort function
Dave Chinner [Tue, 12 Jan 2010 06:39:16 +0000]
lib: Introduce generic list_sort function

There are two copies of list_sort() in the tree already, one in the DRM
code, another in ubifs.  Now XFS needs this as well.  Create a generic
list_sort() function from the ubifs version and convert existing users
to it so we don't end up with yet another copy in the tree.

Signed-off-by: Dave Chinner <david@fromorbit.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Acked-by: Artem Bityutskiy <dedekind@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoremove my email address from checkpatch.
Dave Jones [Tue, 12 Jan 2010 21:59:52 +0000]
remove my email address from checkpatch.

Maybe this will stop people emailing me about it.

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoMerge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzi...
Linus Torvalds [Wed, 13 Jan 2010 04:56:20 +0000]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/jgarzik/libata-dev

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  libata: retry link resume if necessary
  ata_piix: enable 32bit PIO on SATA piix
  sata_promise: don't classify overruns as HSM errors

9 years agoMerge master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Wed, 13 Jan 2010 04:56:01 +0000]
Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: Ensure ARMv6/7 mm files are built using appropriate assembler options
  ARM: Fix wrong dmb
  ARM: 5874/1: serial21285: fix disable_irq-from-interrupt-handler deadlock
  ARM: 5873/1: ARM: Fix the reset logic for ARM RealView boards
  ARM: 5872/1: ARM: include needed linux/cpu.h in asm/cpu.h
  ARM: 5871/1: arch/arm: Fix build failure for lpd7a404_defconfig caused by missing includes
  ARM: 5870/1: arch/arm: Fix build failure for defconfigs without CONFIG_ISA_DMA_API set
  ARM: 5868/1: ARM: fix "BUG: using smp_processor_id() in preemptible code"
  ARM: 5867/1: Update U300 defconfig
  ARM: 5866/1: arm ptrace: use unsigned types for kernel pt_regs
  [ARM] pxa: fix strange characters in zaurus gpio .desc
  ARM: add missing recvmmsg syscall number
  [ARM] pxa: fix compiler warnings of unused variable 'id' in cpu_is_pxa9*()
  [ARM] pxa: update pwm_backlight->notify() to include missed 'struct device *'
  [ARM] pxa: enable L2 if present in XSC3
  [ARM] pxa: do not enable L2 after MMU is enabled

9 years agoMerge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
Linus Torvalds [Wed, 13 Jan 2010 04:55:31 +0000]
Merge branch 'upstream' of git://ftp.linux-mips.org/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (22 commits)
  MIPS: Ignore vmlinux.*
  MIPS: Move vmlinux.ecoff to arch/mips/boot
  MIPS: cpumask_of_node() should handle -1 as a node
  MIPS: Octeon: Use non-overflowing arithmetic in sched_clock
  MIPS: Malta, PowerTV: Remove unnecessary "Linux started"
  MIPS: BCM63xx: Remove duplicate CONFIG_CMDLINE.
  MIPS: AR7: Remove unused prom_getchar()
  MIPS: PowerTV: Remove extra r4k_clockevent_init() call
  MIPS: Cobalt use strlcat() for the command line arguments
  MIPS: Octeon: Add sched_clock() to csrc-octeon.c
  MIPS: TXx9: Cleanup builtin-cmdline processing
  MIPS: PowerTV: simplify prom_init_cmdline() and merge into prom_init()
  MIPS: PowerTV: Remove unused platform_die()
  MIPS: PowerTV: Remove mips_machine_halt()
  MIPS: PowerTV: Remove unused ptv_memsize
  MIPS: PowerTV: Remove unused prom_getcmdline()
  MIPS: AR7: Remove kgdb_enabled
  MIPS: Alchemy: Correct code taking the size of a pointer
  MIPS: BCM63xx: Fix whitespace damaged board_bcm963xx.c
  MIPS: VR41xx: Use strlcat() for the command line arguments
  ...

9 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
Linus Torvalds [Wed, 13 Jan 2010 04:54:52 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: hda - Fix ALC861-VD capture source mixer
  ALSA: ac97: add AC97 STMicroelectronics' codecs
  ALSA: ac97: Add Dell Dimension 2400 to Headphone/Line Jack Sense blacklist
  ASoC: Fix WM8350 DSP mode B configuration
  sbawe: fix memory detection part 2
  sound: oss: off by one bug
  ALSA: usb-audio - Avoid Oops after disconnect
  ALSA: test off by one in setsamplerate()
  ALSA: atiixp: Specify codec for Foxconn RC4107MA-RS2

9 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Wed, 13 Jan 2010 04:53:29 +0000]
Merge git://git./linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (56 commits)
  sky2: Fix oops in sky2_xmit_frame() after TX timeout
  Documentation/3c509: document ethtool support
  af_packet: Don't use skb after dev_queue_xmit()
  vxge: use pci_dma_mapping_error to test return value
  netfilter: ebtables: enforce CAP_NET_ADMIN
  e1000e: fix and commonize code for setting the receive address registers
  e1000e: e1000e_enable_tx_pkt_filtering() returns wrong value
  e1000e: perform 10/100 adaptive IFS only on parts that support it
  e1000e: don't accumulate PHY statistics on PHY read failure
  e1000e: call pci_save_state() after pci_restore_state()
  netxen: update version to 4.0.72
  netxen: fix set mac addr
  netxen: fix smatch warning
  netxen: fix tx ring memory leak
  tcp: update the netstamp_needed counter when cloning sockets
  TI DaVinci EMAC: Handle emac module clock correctly.
  dmfe/tulip: Let dmfe handle DM910x except for SPARC on-board chips
  ixgbe: Fix compiler warning about variable being used uninitialized
  netfilter: nf_ct_ftp: fix out of bounds read in update_nl_seq()
  mv643xx_eth: don't include cache padding in rx desc buffer size
  ...

Fix trivial conflict in drivers/scsi/cxgb3i/cxgb3i_offload.c

9 years agom68knommu: fix definitions of __pa() and __va()
Greg Ungerer [Wed, 13 Jan 2010 00:42:05 +0000]
m68knommu: fix definitions of __pa() and __va()

Fix compilation breakage of all m68knommu targets:

CC arch/m68knommu/kernel/asm-offsets.s
In file included from include/linux/sched.h:77,
                 from arch/m68knommu/kernel/asm-offsets.c:12:
include/linux/percpu.h: In function 'per_cpu_ptr_to_phys':
include/linux/percpu.h:161: error: implicit declaration of function 'virt_to_phy

This is broken in linux-2.6.33-rc3.

Change the definitions of __pa() and __va() to not use virt_to_phys()
and phys_to_virt(). Trivial 1:1 conversion required for the non-MMU case.

A side effect if this is that the m68knommu can now use asm/virtconvert.h
for the definition of virt_to_phys() and phys_to_virt().

Also cleaned up the definition of page_to_phys() when moving into
virtconvert.h.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agolibata: retry link resume if necessary
Tejun Heo [Mon, 11 Jan 2010 02:14:44 +0000]
libata: retry link resume if necessary

Interestingly, when SIDPR is used in ata_piix, writes to DET in
SControl sometimes get ignored leading to detection failure.  Update
sata_link_resume() such that it reads back SControl after clearing DET
and retry if it's not clear.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: fengxiangjun <fengxiangjun@neusoft.com>
Reported-by: Jim Faulkner <jfaulkne@ccs.neu.edu>
Cc: stable@kernel.org
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

9 years agoata_piix: enable 32bit PIO on SATA piix
Tejun Heo [Mon, 11 Jan 2010 08:03:11 +0000]
ata_piix: enable 32bit PIO on SATA piix

Commit 871af1210f13966ab911ed2166e4ab2ce775b99d enabled 32bit PIO for
PATA piix but didn't for SATA.  There's no reason not to use 32bit PIO
on SATA piix.  Enable it.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

9 years agosata_promise: don't classify overruns as HSM errors
Mikael Pettersson [Sat, 9 Jan 2010 22:32:06 +0000]
sata_promise: don't classify overruns as HSM errors

When sata_promise encounters an overrun or underrun error it
translates that to a libata AC_ERR_HSM, causing a hard reset.
Since over/under-runs were thought to be rare and transient,
this action seemed reasonable.

Unfortunately it turns out that the controller throws overrun
errors when e.g. hal polls a CD or DVD writer containing blank
media, causing long sequences of hard resets and retries before
EH finally gives up.

This patch updates sata_promise to classify over/under-runs as
AC_ERR_OTHER instead. This allows libata EH and upper layers to
retry or fail the operation as they see fit without the disruption
caused by repeated hard resets.

This fixes a problem using a DVD-RAM drive with sata_promise,
reported by Thomas Schorpp. I also tested it on a DVD-RW drive.

Signed-off-by: Mikael Pettersson <mikpe@it.uu.se>
Tested-by: thomas schorpp <thomas.schorpp@googlemail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

9 years agoARM: Ensure ARMv6/7 mm files are built using appropriate assembler options
Russell King [Tue, 12 Jan 2010 19:02:05 +0000]
ARM: Ensure ARMv6/7 mm files are built using appropriate assembler options

A kernel with both ARMv6 and ARMv7 selected results in build errors.
Fix this by specifying the proper architectures for these assembly
files.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

9 years agoARM: Fix wrong dmb
Russell King [Tue, 12 Jan 2010 18:59:16 +0000]
ARM: Fix wrong dmb

The __kuser_cmpxchg code uses an ARMv6 dmb instruction, rather than
one based upon the architecture being built for.  Switch to using
the macro provided for this purpose, which also eliminates the
need for an ifdef.

Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

9 years agoMIPS: Ignore vmlinux.*
Yoichi Yuasa [Fri, 18 Dec 2009 12:14:19 +0000]
MIPS: Ignore vmlinux.*

Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org>
Cc: linux-mips <linux-mips@linux-mips.org>
Patchwork: http://patchwork.linux-mips.org/patch/795/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: Move vmlinux.ecoff to arch/mips/boot
Yoichi Yuasa [Fri, 18 Dec 2009 12:13:17 +0000]
MIPS: Move vmlinux.ecoff to arch/mips/boot

It moves to the same directory as the boot files in other formats.

Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org>
Cc: linux-mips <linux-mips@linux-mips.org>
Patchwork: http://patchwork.linux-mips.org/patch/796/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: cpumask_of_node() should handle -1 as a node
Anton Blanchard [Wed, 6 Jan 2010 04:55:13 +0000]
MIPS: cpumask_of_node() should handle -1 as a node

pcibus_to_node can return -1 if we cannot determine which node a pci bus
is on. If passed -1, cpumask_of_node will negatively index the lookup array
and pull in random data:

# cat /sys/devices/pci0000:00/0000:00:01.0/local_cpus
00000000,00000003,00000000,00000000
# cat /sys/devices/pci0000:00/0000:00:01.0/local_cpulist
64-65

Change cpumask_of_node to check for -1 and return cpu_all_mask in this
case:

# cat /sys/devices/pci0000:00/0000:00:01.0/local_cpus
ffffffff,ffffffff,ffffffff,ffffffff
# cat /sys/devices/pci0000:00/0000:00:01.0/local_cpulist
0-127

Signed-off-by: Anton Blanchard <anton@samba.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Andrew Morton <akpm@linux-foundation.org>
Patchwork: http://patchwork.linux-mips.org/patch/831/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: Octeon: Use non-overflowing arithmetic in sched_clock
David Daney [Fri, 8 Jan 2010 22:47:36 +0000]
MIPS: Octeon: Use non-overflowing arithmetic in sched_clock

With typical mult and shift values, the calculation for Octeon's sched_clock
overflows when using 64-bit arithmetic.  Use 128-bit calculations instead.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/849/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: Malta, PowerTV: Remove unnecessary "Linux started"
Yoichi Yuasa [Sun, 3 Jan 2010 05:47:34 +0000]
MIPS: Malta, PowerTV: Remove unnecessary "Linux started"

Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/813/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: BCM63xx: Remove duplicate CONFIG_CMDLINE.
Yoichi Yuasa [Sun, 3 Jan 2010 05:39:11 +0000]
MIPS: BCM63xx: Remove duplicate CONFIG_CMDLINE.

Builtin cmdline is copied by arch_mem_init().

Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/812/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: AR7: Remove unused prom_getchar()
Yoichi Yuasa [Sun, 3 Jan 2010 05:13:04 +0000]
MIPS: AR7: Remove unused prom_getchar()

Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/811/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: PowerTV: Remove extra r4k_clockevent_init() call
David VomLehn [Tue, 22 Dec 2009 01:43:42 +0000]
MIPS: PowerTV: Remove extra r4k_clockevent_init() call

A call to r4k_clocksource_init() was added to plat_time_init(), but
when init_mips_clock_source() calls the same function, boot fails in
clockevents_register_device(). This patch removes the extraneous call.

Signed-off-by: David VomLehn <dvomlehn@cisco.com>
Patchwork: http://patchwork.linux-mips.org/patch/803/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: Cobalt use strlcat() for the command line arguments
Yoichi Yuasa [Thu, 24 Dec 2009 08:06:34 +0000]
MIPS: Cobalt use strlcat() for the command line arguments

Tested with CoLo v1.22

Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org>
Patchwork: http://patchwork.linux-mips.org/patch/807/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: Octeon: Add sched_clock() to csrc-octeon.c
David Daney [Wed, 23 Dec 2009 21:18:54 +0000]
MIPS: Octeon: Add sched_clock() to csrc-octeon.c

With the advent of function graph tracing on MIPS, Octeon needs a high
precision sched_clock() implementation.  Without it, most timing
numbers are reported as 0.000.

This new sched_clock just uses the 64-bit cycle counter appropriately
scaled.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Patchwork: http://patchwork.linux-mips.org/patch/805/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: TXx9: Cleanup builtin-cmdline processing
Atsushi Nemoto [Mon, 21 Dec 2009 15:48:57 +0000]
MIPS: TXx9: Cleanup builtin-cmdline processing

Since commit 898d357b5262f9e26bc2418e01f8676e80d9867e (lmo) /
6acc7d485c24c00e111c61b2e6dff9180faebcae (kernel.org) ("Fix and enhance
built-in kernel command line") arcs_cmdline[] does not contain built-in
command line.  The commit introduce CONFIG_CMDLINE_BOOL and
CONFIG_CMDLINE_OVERRIDE to control built-in command line, and now we can
use them instead of platform-specific built-in command line processing.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Patchwork: http://patchwork.linux-mips.org/patch/802/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: PowerTV: simplify prom_init_cmdline() and merge into prom_init()
Yoichi Yuasa [Fri, 18 Dec 2009 12:38:37 +0000]
MIPS: PowerTV: simplify prom_init_cmdline() and merge into prom_init()

Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org>
Patchwork: http://patchwork.linux-mips.org/patch/801/
Reviewed-by: David VomLehn <dvomlehn@cisco.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: PowerTV: Remove unused platform_die()
Yoichi Yuasa [Fri, 18 Dec 2009 12:36:32 +0000]
MIPS: PowerTV: Remove unused platform_die()

Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org>
Patchwork: http://patchwork.linux-mips.org/patch/800/
Reviewed-by: David VomLehn <dvomlehn@cisco.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: PowerTV: Remove mips_machine_halt()
Yoichi Yuasa [Fri, 18 Dec 2009 12:33:46 +0000]
MIPS: PowerTV: Remove mips_machine_halt()

mips_machine_halt() is same as mips_machine_restart().  Also delete the
registration of _machine_halt and pm_power_off because mips_machine_halt()
is the restart function.

Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org>
Patchwork: http://patchwork.linux-mips.org/patch/798/
Reviewed-by: David VomLehn <dvomlehn@cisco.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: PowerTV: Remove unused ptv_memsize
Yoichi Yuasa [Fri, 18 Dec 2009 12:30:18 +0000]
MIPS: PowerTV: Remove unused ptv_memsize

Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org>
Patchwork: http://patchwork.linux-mips.org/patch/799/
Reviewed-by: David VomLehn <dvomlehn@cisco.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: PowerTV: Remove unused prom_getcmdline()
Yoichi Yuasa [Fri, 18 Dec 2009 12:29:17 +0000]
MIPS: PowerTV: Remove unused prom_getcmdline()

Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org>
Patchwork: http://patchwork.linux-mips.org/patch/797/
Reviewed-by: David VomLehn <dvomlehn@cisco.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: AR7: Remove kgdb_enabled
Yoichi Yuasa [Fri, 18 Dec 2009 12:20:24 +0000]
MIPS: AR7: Remove kgdb_enabled

An unused leftover from the old KGDB implementation.

Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org>
Patchwork: http://patchwork.linux-mips.org/patch/794/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: Alchemy: Correct code taking the size of a pointer
Julia Lawall [Sun, 13 Dec 2009 11:40:39 +0000]
MIPS: Alchemy: Correct code taking the size of a pointer

sizeof(dp) is just the size of the pointer.  Change it to the size of the
referenced structure.

A simplified version of the semantic patch that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression *x;
expression f;
type T;
@@

*f(...,(T)x,...)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Patchwork: http://patchwork.linux-mips.org/patch/789/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: BCM63xx: Fix whitespace damaged board_bcm963xx.c
Florian Fainelli [Sat, 12 Dec 2009 16:57:39 +0000]
MIPS: BCM63xx: Fix whitespace damaged board_bcm963xx.c

Signed-off-by: Florian Fainelli <ffainelli@freebox.fr>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: VR41xx: Use strlcat() for the command line arguments
Yoichi Yuasa [Thu, 10 Dec 2009 05:00:39 +0000]
MIPS: VR41xx: Use strlcat() for the command line arguments

Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/784/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: Cleanup and Fixup of compressed kernel support
Wu Zhangjin [Thu, 10 Dec 2009 14:55:13 +0000]
MIPS: Cleanup and Fixup of compressed kernel support

 o Remove the .initrd section.  The initrd section was already handled
   when vmlinux was linked.
 o Discard .MIPS.options, .options, .pdr, .reginfo, .comment and .note
   sections.  If .MIPS.options is not removed, kernels compiled with gcc
   3.4.6 will not boot.
 o Clean up the file format.
 o Remove several other unneeded sections.

Tested with GCC 3.4.6 and 4.4.1 with and without initrd.

Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/785/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: Cleanup forgotten label_module_alloc in tlbex.c
David Daney [Fri, 4 Dec 2009 01:43:54 +0000]
MIPS: Cleanup forgotten label_module_alloc in tlbex.c

commit c8af165342e83a4eb078c9607d29a7c399d30a53 (lmo) rsp.
e0cc87f59490d7d62a8ab2a76498dc8a2b64927a (kernel.org) left
label_module_alloc unused.  Remove it now.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/752/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMerge branch 'fix/asoc' into for-linus
Takashi Iwai [Tue, 12 Jan 2010 16:50:06 +0000]
Merge branch 'fix/asoc' into for-linus

9 years agoMerge branch 'fix/hda' into for-linus
Takashi Iwai [Tue, 12 Jan 2010 16:50:03 +0000]
Merge branch 'fix/hda' into for-linus

9 years agoALSA: hda - Fix ALC861-VD capture source mixer
Takashi Iwai [Tue, 12 Jan 2010 13:00:11 +0000]
ALSA: hda - Fix ALC861-VD capture source mixer

The capture source or input source mixer element wasn't created properly
for ALC861-VD codec due to the wrong NID passed to
alc_auto_create_input_ctls().

References: Novell bnc#568305
http://bugzilla.novell.com/show_bug.cgi?id=568305

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: <stable@kernel.org>

9 years agosky2: Fix oops in sky2_xmit_frame() after TX timeout
Jarek Poplawski [Mon, 4 Jan 2010 08:48:41 +0000]
sky2: Fix oops in sky2_xmit_frame() after TX timeout

During TX timeout procedure dev could be awoken too early, e.g. by
sky2_complete_tx() called from sky2_down(). Then sky2_xmit_frame()
can run while buffers are freed causing an oops. This patch fixes it
by adding netif_device_present() test in sky2_tx_complete().

Fixes: http://bugzilla.kernel.org/show_bug.cgi?id=14925

With debugging by: Mike McCormack <mikem@ring3k.org>

Reported-by: Berck E. Nash <flyboy@gmail.com>
Tested-by: Berck E. Nash <flyboy@gmail.com>
Signed-off-by: Jarek Poplawski <jarkao2@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoOMAP: DSS2: OMAPFB: fix crash when panel driver was not loaded
Tomi Valkeinen [Thu, 7 Jan 2010 15:45:03 +0000]
OMAP: DSS2: OMAPFB: fix crash when panel driver was not loaded

If the panel's probe had failed, omapfb would still go on, eventually
crashing.

A better fix would be to handle each display properly, and leaving just
the failed display out. But that is a bigger change.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>