11 years ago[watchdog] hpwdt: fix use of inline assembly
Linus Torvalds [Fri, 20 Jun 2008 19:19:28 +0000]
[watchdog] hpwdt: fix use of inline assembly

The inline assembly in drivers/watchdog/hpwdt.c was incredibly broken,
and included all the function prologue and epilogue stuff, even though
it was itself then inside a C function where the compiler would add its
own prologue and epilogue on top of it all.

This then just _happened_ to work if you had exactly the right compiler
version and exactly the right compiler flags, so that gcc just happened
to not create any prologue at all (the gcc-generated epilogue wouldn't
matter, since it would never be reached).

But the more proper way to fix it is to simply not do this.  Move the
inline asm to the top level, with no surrounding function at all (the
better alternative would be to remove the prologue and make it actually
use proper description of the arguments to the inline asm, but that's a
bigger change than the one I'm willing to make right now).

Tested-by: S.Çağlar Onur <caglar@pardus.org.tr>
Acked-by: Thomas Mingarelli <Thomas.Mingarelli@hp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoReinstate ZERO_PAGE optimization in 'get_user_pages()' and fix XIP
Linus Torvalds [Fri, 20 Jun 2008 18:18:25 +0000]
Reinstate ZERO_PAGE optimization in 'get_user_pages()' and fix XIP

KAMEZAWA Hiroyuki and Oleg Nesterov point out that since the commit
557ed1fa2620dc119adb86b34c614e152a629a80 ("remove ZERO_PAGE") removed
the ZERO_PAGE from the VM mappings, any users of get_user_pages() will
generally now populate the VM with real empty pages needlessly.

We used to get the ZERO_PAGE when we did the "handle_mm_fault()", but
since fault handling no longer uses ZERO_PAGE for new anonymous pages,
we now need to handle that special case in follow_page() instead.

In particular, the removal of ZERO_PAGE effectively removed the core
file writing optimization where we would skip writing pages that had not
been populated at all, and increased memory pressure a lot by allocating
all those useless newly zeroed pages.

This reinstates the optimization by making the unmapped PTE case the
same as for a non-existent page table, which already did this correctly.

While at it, this also fixes the XIP case for follow_page(), where the
caller could not differentiate between the case of a page that simply
could not be used (because it had no "struct page" associated with it)
and a page that just wasn't mapped.

We do that by simply returning an error pointer for pages that could not
be turned into a "struct page *".  The error is arbitrarily picked to be
EFAULT, since that was what get_user_pages() already used for the
equivalent IO-mapped page case.

[ Also removed an impossible test for pte_offset_map_lock() failing:
  that's not how that function works ]

Acked-by: Oleg Nesterov <oleg@tv-sign.ru>
Acked-by: Nick Piggin <npiggin@suse.de>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoagp: brown paper bag patch - put back two lines that got lost
Dave Airlie [Thu, 19 Jun 2008 04:57:31 +0000]
agp: brown paper bag patch - put back two lines that got lost

Commit 62c96b9d0917894c164aa3e474a3ff3bca1554ae ("agp/intel: cleanup
some serious whitespace badness") didn't just fix whitespace.  It also
lost two lines.

Noticed by Linus. No more whitespace diffs for me.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoMerge branch 'agp-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied...
Linus Torvalds [Thu, 19 Jun 2008 04:52:35 +0000]
Merge branch 'agp-patches' of git://git./linux/kernel/git/airlied/agp-2.6

* 'agp-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/agp-2.6:
  agp/intel: cleanup some serious whitespace badness
  [AGP] intel_agp: Add support for Intel 4 series chipsets
  [AGP] intel_agp: extra stolen mem size available for IGD_GM chipset
  agp: more boolean conversions.
  drivers/char/agp - use bool
  agp: two-stage page destruction issue
  agp/via: fixup pci ids

11 years agoagp/intel: cleanup some serious whitespace badness
Dave Airlie [Thu, 19 Jun 2008 04:27:53 +0000]
agp/intel: cleanup some serious whitespace badness

Signed-off-by: Dave Airlie <airlied@redhat.com>

11 years ago[AGP] intel_agp: Add support for Intel 4 series chipsets
Zhenyu Wang [Thu, 19 Jun 2008 04:17:58 +0000]
[AGP] intel_agp: Add support for Intel 4 series chipsets

Signed-off-by: Zhenyu Wang <zhenyu.z.wang@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

11 years ago[AGP] intel_agp: extra stolen mem size available for IGD_GM chipset
Zhenyu Wang [Thu, 19 Jun 2008 04:00:37 +0000]
[AGP] intel_agp: extra stolen mem size available for IGD_GM chipset

This adds missing stolen memory size detect for IGD_GM, be sure to
detect right size as current X intel driver (2.3.2) which has already
worked out.

Signed-off-by: Zhenyu Wang <zhenyu.z.wang@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

11 years agoagp: more boolean conversions.
Dave Airlie [Thu, 19 Jun 2008 00:42:17 +0000]
agp: more boolean conversions.

Signed-off-by: Dave Airlie <airlied@redhat.com>

11 years agodrivers/char/agp - use bool
Joe Perches [Wed, 26 Mar 2008 21:10:02 +0000]
drivers/char/agp - use bool

Use boolean in AGP instead of having own TRUE/FALSE

--
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

11 years agoagp: two-stage page destruction issue
Jan Beulich [Wed, 18 Jun 2008 08:28:00 +0000]
agp: two-stage page destruction issue

besides it apparently being useful only in 2.6.24 (the changes in 2.6.25
really mean that it could be converted back to a single-stage mechanism),
I'm seeing an issue in Xen Dom0 kernels, which is caused by the calling
of gart_to_virt() in the second stage invocations of the destroy function.
I think that besides this being a real issue with Xen (where
unmap_page_from_agp() is not just a page table attribute change), this
also is invalid from a theoretical perspective: One should not assume that
gart_to_virt() is still valid after unmapping a page. So minimally (keeping
the 2-stage mechanism) a patch like the one below would be needed.

Jan

Signed-off-by: Dave Airlie <airlied@redhat.com>

11 years agoagp/via: fixup pci ids
Greg KH [Wed, 18 Jun 2008 23:52:26 +0000]
agp/via: fixup pci ids

add a new PCI ID and remove an old dodgy one, include the explaination
in the commented code so nobody readds later.

(davej also sent the pci id addition).

Signed-off-by: Dave Airlie <airlied@redhat.com>

11 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland...
Linus Torvalds [Wed, 18 Jun 2008 23:08:59 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/roland/infiniband

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IB/uverbs: Fix check of is_closed flag check in ib_uverbs_async_handler()
  RDMA/nes: Fix off-by-one in nes_reg_user_mr() error path

11 years agoIB/uverbs: Fix check of is_closed flag check in ib_uverbs_async_handler()
Jack Morgenstein [Wed, 18 Jun 2008 22:36:38 +0000]
IB/uverbs: Fix check of is_closed flag check in ib_uverbs_async_handler()

Commit 1ae5c187 ("IB/uverbs: Don't store struct file * for event
files") changed the way that closed files are handled in the uverbs
code.  However, after the conversion, is_closed flag is checked
incorrectly in ib_uverbs_async_handler().  As a result, no async
events are ever passed to applications.

Found by: Ronni Zimmerman <ronniz@mellanox.co.il>

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog
Linus Torvalds [Wed, 18 Jun 2008 19:55:00 +0000]
Merge git://git./linux/kernel/git/wim/linux-2.6-watchdog

* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  Revert "[WATCHDOG] hpwdt: Fix NMI handling."
  [WATCHDOG] hpwdt: Add CFLAGS to get driver working
  Revert "[WATCHDOG] make watchdog/hpwdt.c:asminline_call() static"

11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6
Linus Torvalds [Wed, 18 Jun 2008 18:55:43 +0000]
Merge git://git./linux/kernel/git/jejb/scsi-rc-fixes-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:
  [SCSI] dpt_i2o: Add PROC_IA64 define
  [SCSI] scsi_host regression: fix scsi host leak
  [SCSI] sr: fix corrupt CD data after media change and delay

11 years agoMerge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
Linus Torvalds [Wed, 18 Jun 2008 18:55:19 +0000]
Merge branch 'merge' of git://git./linux/kernel/git/paulus/powerpc

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  [POWERPC] Clear sub-page HPTE present bits when demoting page size
  [POWERPC] 4xx: Clear new TLB cache attribute bits in Data Storage vector

11 years agoMerge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux...
Linus Torvalds [Wed, 18 Jun 2008 18:55:03 +0000]
Merge branch 'for_linus' of git://git./linux/kernel/git/jack/linux-udf-2.6

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-udf-2.6:
  udf: restore UDFFS_DEBUG to being undefined by default

11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Wed, 18 Jun 2008 18:48:40 +0000]
Merge git://git./linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (43 commits)
  netlink: genl: fix circular locking
  Revert "mac80211: Use skb_header_cloned() on TX path."
  af_unix: fix 'poll for write'/ connected DGRAM sockets
  tun: Proper handling of IPv6 header in tun driver when TUN_NO_PI is set
  atl1: relax eeprom mac address error check
  net/enc28j60: low power mode
  net/enc28j60: section fix
  sky2: 88E8040T pci device id
  netxen: download firmware in pci probe
  netxen: cleanup debug messages
  netxen: remove global physical_port array
  netxen: fix portnum for hp mezz cards
  ibm_newemac: select CRC32 in Kconfig
  xfrm: fix fragmentation for ipv4 xfrm tunnel
  netfilter: nf_conntrack_h323: fix module unload crash
  netfilter: nf_conntrack_h323: fix memory leak in module initialization error path
  netfilter: nf_nat: fix RCU races
  atm: [he] send idle cells instead of unassigned when in SDH mode
  atm: [he] limit queries to the device's register space
  atm: [br2864] fix routed vcmux support
  ...

11 years agoRevert "[WATCHDOG] hpwdt: Fix NMI handling."
Wim Van Sebroeck [Wed, 18 Jun 2008 16:22:48 +0000]
Revert "[WATCHDOG] hpwdt: Fix NMI handling."

The old setup works better.

Signed-off-by: Thomas Mingarelli <Thomas.Mingarelli@hp.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

11 years ago[POWERPC] Clear sub-page HPTE present bits when demoting page size
Paul Mackerras [Wed, 18 Jun 2008 06:40:35 +0000]
[POWERPC] Clear sub-page HPTE present bits when demoting page size

When we demote a slice from 64k to 4k, and we are about to insert an
HPTE for a 4k subpage and we notice that there is an existing 64k
HPTE, we first invalidate that HPTE before inserting the new 4k
subpage HPTE.  Since the bits that encode which hash bucket the old
HPTE was in overlap with the bits that encode which of the 16 subpages
have HPTEs, we need to clear out the subpage HPTE-present bits before
starting to insert HPTEs for the 4k subpages.  If we don't do that, we
can erroneously think that a subpage already has an HPTE when it
doesn't.

That in itself wouldn't be such a problem except that when we go to
update the HPTE that we think is present on machines with a
hypervisor, the hypervisor can tell us that the HPTE we think is there
is actually there even though it isn't, which can lead to a process
getting stuck in a loop, continually faulting.  The reason for the
confusion is that the AVPN (abbreviated virtual page number) we are
looking for in the HPTE for a 4k subpage can actually match the AVPN
in a stale HPTE for another 64k page.  For example, the HPTE for
the 4k subpage at 0x84000f000 will be in the same hash bucket and have
the same AVPN as the HPTE for the 64k page at 0x8400f0000.

This fixes the code to clear out the subpage HPTE-present bits.

Signed-off-by: Paul Mackerras <paulus@samba.org>

11 years ago[POWERPC] 4xx: Clear new TLB cache attribute bits in Data Storage vector
Josh Boyer [Tue, 17 Jun 2008 22:34:39 +0000]
[POWERPC] 4xx: Clear new TLB cache attribute bits in Data Storage vector

A recent commit added support for the new 440x6 and 464 cores that have the
added WL1, IL1I, IL1D, IL2I, and ILD2 bits for the caching attributes in the
TLBs.  The new bits were cleared in the finish_tlb_load function, however a
similar bit of code was missed in the DataStorage interrupt vector.

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

11 years agonetlink: genl: fix circular locking
Patrick McHardy [Wed, 18 Jun 2008 09:07:07 +0000]
netlink: genl: fix circular locking

genetlink has a circular locking dependency when dumping the registered
families:

- dump start:
genl_rcv()            : take genl_mutex
genl_rcv_msg()        : call netlink_dump_start() while holding genl_mutex
netlink_dump_start(),
netlink_dump()        : take nlk->cb_mutex
ctrl_dumpfamily()     : try to detect this case and not take genl_mutex a
                        second time

- dump continuance:
netlink_rcv()         : call netlink_dump
netlink_dump          : take nlk->cb_mutex
ctrl_dumpfamily()     : take genl_mutex

Register genl_lock as callback mutex with netlink to fix this. This slightly
widens an already existing module unload race, the genl ops used during the
dump might go away when the module is unloaded. Thomas Graf is working on a
seperate fix for this.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agoRevert "mac80211: Use skb_header_cloned() on TX path."
David S. Miller [Wed, 18 Jun 2008 08:19:51 +0000]
Revert "mac80211: Use skb_header_cloned() on TX path."

This reverts commit 608961a5eca8d3c6bd07172febc27b5559408c5d.

The problem is that the mac80211 stack not only needs to be able to
muck with the link-level headers, it also might need to mangle all of
the packet data if doing sw wireless encryption.

This fixes kernel bugzilla #10903.  Thanks to Didier Raboud (for the
bugzilla report), Andrew Prince (for bisecting), Johannes Berg (for
bringing this bisection analysis to my attention), and Ilpo (for
trying to analyze this purely from the TCP side).

In 2.6.27 we can take another stab at this, by using something like
skb_cow_data() when the TX path of mac80211 ends up with a non-NULL
tx->key.  The ESP protocol code in the IPSEC stack can be used as a
model for implementation.

Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agoaf_unix: fix 'poll for write'/ connected DGRAM sockets
Rainer Weikusat [Wed, 18 Jun 2008 05:28:05 +0000]
af_unix: fix 'poll for write'/ connected DGRAM sockets

The unix_dgram_sendmsg routine implements a (somewhat crude)
form of receiver-imposed flow control by comparing the length of the
receive queue of the 'peer socket' with the max_ack_backlog value
stored in the corresponding sock structure, either blocking
the thread which caused the send-routine to be called or returning
EAGAIN. This routine is used by both SOCK_DGRAM and SOCK_SEQPACKET
sockets. The poll-implementation for these socket types is
datagram_poll from core/datagram.c. A socket is deemed to be writeable
by this routine when the memory presently consumed by datagrams
owned by it is less than the configured socket send buffer size. This
is always wrong for connected PF_UNIX non-stream sockets when the
abovementioned receive queue is currently considered to be full.
'poll' will then return, indicating that the socket is writeable, but
a subsequent write result in EAGAIN, effectively causing an
(usual) application to 'poll for writeability by repeated send request
with O_NONBLOCK set' until it has consumed its time quantum.

The change below uses a suitably modified variant of the datagram_poll
routines for both type of PF_UNIX sockets, which tests if the
recv-queue of the peer a socket is connected to is presently
considered to be 'full' as part of the 'is this socket
writeable'-checking code. The socket being polled is additionally
put onto the peer_wait wait queue associated with its peer, because the
unix_dgram_sendmsg routine does a wake up on this queue after a
datagram was received and the 'other wakeup call' is done implicitly
as part of skb destruction, meaning, a process blocked in poll
because of a full peer receive queue could otherwise sleep forever
if no datagram owned by its socket was already sitting on this queue.
Among this change is a small (inline) helper routine named
'unix_recvq_full', which consolidates the actual testing code (in three
different places) into a single location.

Signed-off-by: Rainer Weikusat <rweikusat@mssgmbh.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agoMerge branch 'davem-fixes' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik...
David S. Miller [Wed, 18 Jun 2008 04:32:08 +0000]
Merge branch 'davem-fixes' of /linux/kernel/git/jgarzik/netdev-2.6

11 years agotun: Proper handling of IPv6 header in tun driver when TUN_NO_PI is set
Ang Way Chuang [Wed, 18 Jun 2008 04:10:33 +0000]
tun: Proper handling of IPv6 header in tun driver when TUN_NO_PI is set

By default, tun.c running in TUN_TUN_DEV mode will set the protocol of
packet to IPv4 if TUN_NO_PI is set. My program failed to work when I
assumed that the driver will check the first nibble of packet,
determine IP version and set the appropriate protocol.

Signed-off-by: Ang Way Chuang <wcang@nav6.org>
Acked-by: Max Krasnyansky <maxk@qualcomm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agoatl1: relax eeprom mac address error check
Radu Cristescu [Thu, 12 Jun 2008 22:04:54 +0000]
atl1: relax eeprom mac address error check

The atl1 driver tries to determine the MAC address thusly:

- If an EEPROM exists, read the MAC address from EEPROM and
  validate it.
- If an EEPROM doesn't exist, try to read a MAC address from
  SPI flash.
- If that fails, try to read a MAC address directly from the
  MAC Station Address register.
- If that fails, assign a random MAC address provided by the
  kernel.

We now have a report of a system fitted with an EEPROM containing all
zeros where we expect the MAC address to be, and we currently handle
this as an error condition.  Turns out, on this system the BIOS writes
a valid MAC address to the NIC's MAC Station Address register, but we
never try to read it because we return an error when we find the all-
zeros address in EEPROM.

This patch relaxes the error check and continues looking for a MAC
address even if it finds an illegal one in EEPROM.

Signed-off-by: Radu Cristescu <advantis@gmx.net>
Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

11 years agonet/enc28j60: low power mode
David Brownell [Fri, 13 Jun 2008 04:38:06 +0000]
net/enc28j60: low power mode

Keep enc28j60 chips in low-power mode when they're not in use.
At typically 120 mA, these chips run hot even when idle; this
low power mode cuts that power usage by a factor of around 100.

This version provides a generic routine to poll a register until
its masked value equals some value ... e.g. bit set or cleared.
It's basically what the previous wait_phy_ready() did, but this
version is generalized to support the handshaking needed to
enter and exit low power mode.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Claudio Lanconelli <lanconelli.claudio@eptar.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

11 years agonet/enc28j60: section fix
David Brownell [Fri, 13 Jun 2008 04:36:24 +0000]
net/enc28j60: section fix

Minor bugfixes to the enc28j60 driver ... wrong section marking,
indentation, and bogus use of spi_bus_type.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Claudio Lanconelli <lanconelli.claudio@eptar.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

11 years agosky2: 88E8040T pci device id
Stephen Hemminger [Sat, 14 Jun 2008 17:32:15 +0000]
sky2: 88E8040T pci device id

Missed one pci id for 88E8040T.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

11 years agonetxen: download firmware in pci probe
Dhananjay Phadke [Mon, 16 Jun 2008 05:59:46 +0000]
netxen: download firmware in pci probe

Downloading firmware in pci probe allows recovery in case of
firmware failure by reloading the driver.

Also reduced delays in firmware load.

Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

11 years agonetxen: cleanup debug messages
Dhananjay Phadke [Mon, 16 Jun 2008 05:59:45 +0000]
netxen: cleanup debug messages

o Remove unnecessary debug prints and functions.
o Explicitly specify pci class (0x020000) to avoid enabling
  management function.

Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

11 years agonetxen: remove global physical_port array
Dhananjay Phadke [Mon, 16 Jun 2008 05:59:44 +0000]
netxen: remove global physical_port array

Store physical port number in netxen_adapter structure.

Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

11 years agonetxen: fix portnum for hp mezz cards
Dhananjay Phadke [Mon, 16 Jun 2008 05:59:43 +0000]
netxen: fix portnum for hp mezz cards

This fixes a the issue where logical port number is set incorrectly
for HP blade mezz cards.

Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

11 years agoibm_newemac: select CRC32 in Kconfig
Josh Boyer [Tue, 17 Jun 2008 23:27:55 +0000]
ibm_newemac: select CRC32 in Kconfig

The ibm_newemac driver requires ether_crc to be defined.  Apparently it is
possible to generate a .config without CONFIG_CRC32 set which causes the
following link errors if IBM_NEW_EMAC is selected:

  LD      .tmp_vmlinux1
drivers/built-in.o: In function `emac_hash_mc':
core.c:(.text+0x2f524): undefined reference to `crc32_le'
core.c:(.text+0x2f528): undefined reference to `bitrev32'
make: *** [.tmp_vmlinux1] Error 1

This patch has IBM_NEW_EMAC select CRC32 so we don't hit this error.

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

11 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Linus Torvalds [Wed, 18 Jun 2008 01:10:40 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: appletouch - implement reset-resume logic
  Input: i8042 - retry failed CTR writes when resuming
  Input: i8042 - add Fujitsu-Siemens Amilo Pro V2030 to nomux table
  Input: pcspkr - remove negative dependency on snd-pcsp

Manually fixed up trivial conflict in drivers/usb/core/quirks.c

11 years agofuse: fix thinko in max I/O size calucation
Miklos Szeredi [Tue, 17 Jun 2008 16:05:40 +0000]
fuse: fix thinko in max I/O size calucation

Use max not min to enforce a lower limit on the max I/O size.

This bug was introduced by "fuse: fix max i/o size calculation" (commit
e5d9a0df07484d6d191756878c974e4307fb24ce).

Thanks to Brian Wang for noticing.

Reported-by: Brian Wang <ywang221@hotmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Acked-by: Szabolcs Szakacsits <szaka@ntfs-3g.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoUnignore vmlinux.lds.h from Git.
Eduard - Gabriel Munteanu [Sun, 15 Jun 2008 15:05:01 +0000]
Unignore vmlinux.lds.h from Git.

Added !vmlinux.lds.h to .gitignore because it would otherwise be ignored.

Signed-off-by: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agox86-64: Fix "bytes left to copy" return value for copy_from_user()
Linus Torvalds [Wed, 18 Jun 2008 00:47:50 +0000]
x86-64: Fix "bytes left to copy" return value for copy_from_user()

Most users by far do not care about the exact return value (they only
really care about whether the copy succeeded in its entirety or not),
but a few special core routines actually care deeply about exactly how
many bytes were copied from user space.

And the unrolled versions of the x86-64 user copy routines would
sometimes report that it had copied more bytes than it actually had.

Very few uses actually have partial copies to begin with, but to make
this bug even harder to trigger, most x86 CPU's use the "rep string"
instructions for normal user copies, and that version didn't have this
issue.

To make it even harder to hit, the one user of this that really cared
about the return value (and used the uncached version of the copy that
doesn't use the "rep string" instructions) was the generic write
routine, which pre-populated its source, once more hiding the problem by
avoiding the exception case that triggers the bug.

In other words, very special thanks to Bron Gondwana who not only
triggered this, but created a test-program to show it, and bisected the
behavior down to commit 08291429cfa6258c4cd95d8833beb40f828b194e ("mm:
fix pagecache write deadlocks") which changed the access pattern just
enough that you can now trigger it with 'writev()' with multiple
iovec's.

That commit itself was not the cause of the bug, it just allowed all the
stars to align just right that you could trigger the problem.

[ Side note: this is just the minimal fix to make the copy routines
  (with __copy_from_user_inatomic_nocache as the particular version that
  was involved in showing this) have the right return values.

  We really should improve on the exceptional case further - to make the
  copy do a byte-accurate copy up to the exact page limit that causes it
  to fail.  As it is, the callers have to do extra work to handle the
  limit case gracefully. ]

Reported-by: Bron Gondwana <brong@fastmail.fm>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

 (which didn't have this problem), and since
most users that do the carethis was very hard to trigger, but

11 years agoxfrm: fix fragmentation for ipv4 xfrm tunnel
Steffen Klassert [Tue, 17 Jun 2008 23:37:13 +0000]
xfrm: fix fragmentation for ipv4 xfrm tunnel

When generating the ip header for the transformed packet we just copy
the frag_off field of the ip header from the original packet to the ip
header of the new generated packet. If we receive a packet as a chain
of fragments, all but the last of the new generated packets have the
IP_MF flag set. We have to mask the frag_off field to only keep the
IP_DF flag from the original packet. This got lost with git commit
36cf9acf93e8561d9faec24849e57688a81eb9c5 ("[IPSEC]: Separate
inner/outer mode processing on output")

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agonetfilter: nf_conntrack_h323: fix module unload crash
Patrick McHardy [Tue, 17 Jun 2008 22:52:32 +0000]
netfilter: nf_conntrack_h323: fix module unload crash

The H.245 helper is not registered/unregistered, but assigned to
connections manually from the Q.931 helper. This means on unload
existing expectations and connections using the helper are not
cleaned up, leading to the following oops on module unload:

CPU 0 Unable to handle kernel paging request at virtual address c00a6828, epc == 802224dc, ra == 801d4e7c
Oops[#1]:
Cpu 0
$ 0   : 00000000 00000000 00000004 c00a67f0
$ 4   : 802a5ad0 81657e00 00000000 00000000
$ 8   : 00000008 801461c8 00000000 80570050
$12   : 819b0280 819b04b0 00000006 00000000
$16   : 802a5a60 80000000 80b46000 80321010
$20   : 00000000 00000004 802a5ad0 00000001
$24   : 00000000 802257a8
$28   : 802a4000 802a59e8 00000004 801d4e7c
Hi    : 0000000b
Lo    : 00506320
epc   : 802224dc ip_conntrack_help+0x38/0x74     Tainted: P
ra    : 801d4e7c nf_iterate+0xbc/0x130
Status: 1000f403    KERNEL EXL IE
Cause : 00800008
BadVA : c00a6828
PrId  : 00019374
Modules linked in: ip_nat_pptp ip_conntrack_pptp ath_pktlog wlan_acl wlan_wep wlan_tkip wlan_ccmp wlan_xauth ath_pci ath_dev ath_dfs ath_rate_atheros wlan ath_hal ip_nat_tftp ip_conntrack_tftp ip_nat_ftp ip_conntrack_ftp pppoe ppp_async ppp_deflate ppp_mppe pppox ppp_generic slhc
Process swapper (pid: 0, threadinfo=802a4000, task=802a6000)
Stack : 801e7d98 00000004 802a5a60 80000000 801d4e7c 801d4e7c 802a5ad0 00000004
        00000000 00000000 801e7d98 00000000 00000004 802a5ad0 00000000 00000010
        801e7d98 80b46000 802a5a60 80320000 80000000 801d4f8c 802a5b00 00000002
        80063834 00000000 80b46000 802a5a60 801e7d98 80000000 802ba854 00000000
        81a02180 80b7e260 81a021b0 819b0000 819b0000 80570056 00000000 00000001
        ...
Call Trace:
 [<801e7d98>] ip_finish_output+0x0/0x23c
 [<801d4e7c>] nf_iterate+0xbc/0x130
 [<801d4e7c>] nf_iterate+0xbc/0x130
 [<801e7d98>] ip_finish_output+0x0/0x23c
 [<801e7d98>] ip_finish_output+0x0/0x23c
 [<801d4f8c>] nf_hook_slow+0x9c/0x1a4

One way to fix this would be to split helper cleanup from the unregistration
function and invoke it for the H.245 helper, but since ctnetlink needs to be
able to find the helper for synchonization purposes, a better fix is to
register it normally and make sure its not assigned to connections during
helper lookup. The missing l3num initialization is enough for this, this
patch changes it to use AF_UNSPEC to make it more explicit though.

Reported-by: liannan <liannan@twsz.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agonetfilter: nf_conntrack_h323: fix memory leak in module initialization error path
Patrick McHardy [Tue, 17 Jun 2008 22:52:07 +0000]
netfilter: nf_conntrack_h323: fix memory leak in module initialization error path

Properly free h323_buffer when helper registration fails.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agonetfilter: nf_nat: fix RCU races
Patrick McHardy [Tue, 17 Jun 2008 22:51:47 +0000]
netfilter: nf_nat: fix RCU races

Fix three ct_extend/NAT extension related races:

- When cleaning up the extension area and removing it from the bysource hash,
  the nat->ct pointer must not be set to NULL since it may still be used in
  a RCU read side

- When replacing a NAT extension area in the bysource hash, the nat->ct
  pointer must be assigned before performing the replacement

- When reallocating extension storage in ct_extend, the old memory must
  not be freed immediately since it may still be used by a RCU read side

Possibly fixes https://bugzilla.redhat.com/show_bug.cgi?id=449315
and/or http://bugzilla.kernel.org/show_bug.cgi?id=10875

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[WATCHDOG] hpwdt: Add CFLAGS to get driver working
Thomas Mingarelli [Thu, 12 Jun 2008 20:20:32 +0000]
[WATCHDOG] hpwdt: Add CFLAGS to get driver working

To get this driver working we need the CFLAGS_hpwdt.o += -O in the Makefile.

Signed-off-by: Thomas Mingarelli <Thomas.Mingarelli@hp.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

11 years agoRevert "[WATCHDOG] make watchdog/hpwdt.c:asminline_call() static"
Thomas Mingarelli [Thu, 12 Jun 2008 20:20:32 +0000]
Revert "[WATCHDOG] make watchdog/hpwdt.c:asminline_call() static"

The driver needs the asmlinkage tag and the CFLAGS line in the Makefile.
Without it the driver doesn't work.

Signed-off-by: Thomas Mingarelli <Thomas.Mingarelli@hp.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

11 years agoInput: appletouch - implement reset-resume logic
Oliver Neukum [Tue, 17 Jun 2008 15:56:55 +0000]
Input: appletouch - implement reset-resume logic

On some boxes the touchpad needs to be reinitialized after resume to make
it function again. This fixes bugzilla #10825.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

11 years agoInput: i8042 - retry failed CTR writes when resuming
Jiri Kosina [Tue, 17 Jun 2008 15:47:27 +0000]
Input: i8042 - retry failed CTR writes when resuming

There are systems that fail in i8042_resume() with

i8042: Can't write CTR to resume

as i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR) fails even though the
controller claimed itself to be ready before.

One retry after failing write fixes the problems on the failing systems.

Reported-by: Helmut Schaa <hschaa@novell.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

11 years agoatm: [he] send idle cells instead of unassigned when in SDH mode
Chas Williams [Tue, 17 Jun 2008 00:21:27 +0000]
atm: [he] send idle cells instead of unassigned when in SDH mode

Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agoatm: [he] limit queries to the device's register space
Robert T. Johnson [Tue, 17 Jun 2008 00:20:52 +0000]
atm: [he] limit queries to the device's register space

From: "Robert T. Johnson" <rtjohnso@eecs.berkeley.edu>
Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil>

11 years agoatm: [br2864] fix routed vcmux support
Eric Kinzie [Tue, 17 Jun 2008 00:18:18 +0000]
atm: [br2864] fix routed vcmux support

From: Eric Kinzie <ekinzie@cmf.nrl.navy.mil>
Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agoatm: [he] only support suni driver on multimode interfaces
Chas Williams [Tue, 17 Jun 2008 00:17:31 +0000]
atm: [he] only support suni driver on multimode interfaces

Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agoatm: [iphase] doesn't call phy->start due to a bogus #ifndef
Jorge Boncompte [DTI2] [Tue, 17 Jun 2008 00:16:35 +0000]
atm: [iphase] doesn't call phy->start due to a bogus #ifndef

This causes the suni driver to oops if you try to use sonetdiag to get
the statistics. Also add the corresponding phy->stop call to fix another
oops if you try to remove the module.

Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net>
Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agoatm: [iphase] set drvdata before enabling interrupts
Jorge Boncompte [DTI2] [Tue, 17 Jun 2008 00:16:04 +0000]
atm: [iphase] set drvdata before enabling interrupts

Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net>
Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agoatm: [br2684] Fix oops due to skb->dev being NULL
Jorge Boncompte [DTI2] [Tue, 17 Jun 2008 00:15:33 +0000]
atm: [br2684] Fix oops due to skb->dev being NULL

It happens that if a packet arrives in a VC between the call to open it on
the hardware and the call to change the backend to br2684, br2684_regvcc
processes the packet and oopses dereferencing skb->dev because it is
NULL before the call to br2684_push().

Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net>
Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil>

11 years agoipv4: Remove unused definitions in net/ipv4/tcp_ipv4.c.
Rami Rosen [Tue, 17 Jun 2008 00:07:16 +0000]
ipv4: Remove unused definitions in net/ipv4/tcp_ipv4.c.

1) Remove ICMP_MIN_LENGTH, as it is unused.

2) Remove unneeded tcp_v4_send_check() declaration.

Signed-off-by: Rami Rosen <ramirose@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agoraw: Restore /proc/net/raw correct behavior
Eric Dumazet [Tue, 17 Jun 2008 00:03:32 +0000]
raw: Restore /proc/net/raw correct behavior

I just noticed "cat /proc/net/raw" was buggy, missing '\n' separators.

I believe this was introduced by commit 8cd850efa4948d57a2ed836911cfd1ab299e89c6
([RAW]: Cleanup IPv4 raw_seq_show.)

This trivial patch restores correct behavior, and applies to current
Linus tree (should also be applied to stable tree as well.)

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agonet: Fix test for VLAN TX checksum offload capability
Ben Hutchings [Tue, 17 Jun 2008 00:02:28 +0000]
net: Fix test for VLAN TX checksum offload capability

Selected device feature bits can be propagated to VLAN devices, so we
can make use of TX checksum offload and TSO on VLAN-tagged packets.
However, if the physical device does not do VLAN tag insertion or
generic checksum offload then the test for TX checksum offload in
dev_queue_xmit() will see a protocol of htons(ETH_P_8021Q) and yield
false.

This splits the checksum offload test into two functions:

- can_checksum_protocol() tests a given protocol against a feature bitmask

- dev_can_checksum() first tests the skb protocol against the device
  features; if that fails and the protocol is htons(ETH_P_8021Q) then
  it tests the encapsulated protocol against the effective device
  features for VLANs

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agosctp: Correclty set changeover_active for SFR-CACC
Vlad Yasevich [Tue, 17 Jun 2008 00:00:29 +0000]
sctp: Correclty set changeover_active for SFR-CACC

Right now, any time we set a primary transport we set
the changeover_active flag.  As a result, we invoke SFR-CACC
even when there has been no changeover events.

Only set changeover_active, when there is a true changeover
event, i.e. we had a primary path and we are changing to
another transport.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agosctp: Correctly cleanup procfs entries upon failure.
Wei Yongjun [Mon, 16 Jun 2008 23:59:55 +0000]
sctp: Correctly cleanup procfs entries upon failure.

This patch remove the proc fs entry which has been created if fail to
set up proc fs entry for the SCTP protocol.

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agotcp: Revert reset of deferred accept changes in 2.6.26
David S. Miller [Mon, 16 Jun 2008 23:57:40 +0000]
tcp: Revert reset of deferred accept changes in 2.6.26

Ingo's system is still seeing strange behavior, and he
reports that is goes away if the rest of the deferred
accept changes are reverted too.

Therefore this reverts e4c78840284f3f51b1896cf3936d60a6033c4d2c
("[TCP]: TCP_DEFER_ACCEPT updates - dont retxmt synack") and
539fae89bebd16ebeafd57a87169bc56eb530d76 ("[TCP]: TCP_DEFER_ACCEPT
updates - defer timeout conflicts with max_thresh").

Just like the other revert, these ideas can be revisited for
2.6.27

Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agoipv6 sit: Avoid extra need for compat layer in PRL management.
YOSHIFUJI Hideaki [Mon, 16 Jun 2008 23:48:20 +0000]
ipv6 sit: Avoid extra need for compat layer in PRL management.

We've introduced extra need of compat layer for ip_tunnel_prl{}
for PRL (Potential Router List) management.  Though compat_ioctl
is still missing in ipv4/ipv6, let's make the interface more
straight-forward and eliminate extra need for nasty compat layer
anyway since the interface is new for 2.6.26.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agopkt_sched: Change HTB_HYSTERESIS to a runtime parameter htb_hysteresis.
Jesper Dangaard Brouer [Mon, 16 Jun 2008 23:39:32 +0000]
pkt_sched: Change HTB_HYSTERESIS to a runtime parameter htb_hysteresis.

Add a htb_hysteresis parameter to htb_sch.ko and by sysfs magic make
it runtime adjustable via
/sys/module/sch_htb/parameters/htb_hysteresis mode 640.

Signed-off-by: Jesper Dangaard Brouer <hawk@comx.dk>
Acked-by: Martin Devera <devik@cdi.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agopkt_sched: HTB scheduler, change default hysteresis mode to off.
Jesper Dangaard Brouer [Mon, 16 Jun 2008 23:38:33 +0000]
pkt_sched: HTB scheduler, change default hysteresis mode to off.

The HTB hysteresis mode reduce the CPU load, but at the
cost of scheduling accuracy.

On ADSL links (512 kbit/s upstream), this inaccuracy introduce
significant jitter, enought to disturbe VoIP.  For details see my
masters thesis (http://www.adsl-optimizer.dk/thesis/), chapter 7,
section 7.3.1, pp 69-70.

Signed-off-by: Jesper Dangaard Brouer <hawk@comx.dk>
Acked-by: Martin Devera <devik@cdi.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agoMerge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfashe...
Linus Torvalds [Mon, 16 Jun 2008 20:17:33 +0000]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/mfasheh/ocfs2

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2:
  ocfs2: Remove ->hangup() from stack glue operations.
  ocfs2: Move the call of ocfs2_hb_ctl into the stack glue.
  ocfs2: Move the hb_ctl_path sysctl into the stack glue.

11 years agoMerge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
Linus Torvalds [Mon, 16 Jun 2008 18:52:43 +0000]
Merge branch 'release' of git://git./linux/kernel/git/aegl/linux-2.6

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] Fix CONFIG_IA64_SGI_UV build error
  [IA64] Update check_sal_cache_flush to use platform_send_ipi()
  [IA64] perfmon: fix async exit bug

11 years agoocfs2: Remove ->hangup() from stack glue operations.
Joel Becker [Fri, 30 May 2008 22:58:26 +0000]
ocfs2: Remove ->hangup() from stack glue operations.

The ->hangup() call was only used to execute ocfs2_hb_ctl.  Now that
the generic stack glue code handles this, the underlying stack drivers
don't need to know about it.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

11 years agoocfs2: Move the call of ocfs2_hb_ctl into the stack glue.
Joel Becker [Fri, 30 May 2008 22:43:58 +0000]
ocfs2: Move the call of ocfs2_hb_ctl into the stack glue.

Take o2hb_stop() out of the o2cb code and make it part of the generic
stack glue as ocfs2_leave_group().  This also allows us to remove the
ocfs2_get_hb_ctl_path() function - everything to do with hb_ctl is now
part of stackglue.c.  o2cb no longer needs a ->hangup() function.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

11 years agoocfs2: Move the hb_ctl_path sysctl into the stack glue.
Joel Becker [Fri, 30 May 2008 22:30:49 +0000]
ocfs2: Move the hb_ctl_path sysctl into the stack glue.

ocfs2 needs to call out to the hb_ctl program at unmount for all cluster
stacks.  The first step is to move the hb_ctl_path sysctl out of the
o2cb code and into the generic stack glue.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

11 years agoMerge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
Linus Torvalds [Mon, 16 Jun 2008 17:24:01 +0000]
Merge branch 'merge' of git://git./linux/kernel/git/paulus/powerpc

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (21 commits)
  [POWERPC] Turn on ATA_SFF so we get SATA_SVW back in defconfigs
  [POWERPC] Remove ppc32's export of console_drivers
  [POWERPC] Fix -Os kernel builds with newer gcc versions
  [POWERPC] Fix bootwrapper builds with newer gcc versions
  [POWERPC] Build fix for drivers/macintosh/mediabay.c
  [POWERPC] Fix warning in pseries/eeh_driver.c
  [POWERPC] Add missing of_node_put in drivers/macintosh/therm_adt746x.c
  [POWERPC] Add missing of_node_put in drivers/macintosh/smu.c
  [POWERPC] Add missing of_node_put in pseries/nvram.c
  [POWERPC] Fix return value check logic in debugfs virq_mapping setup
  [POWERPC] Fix rmb to order cacheable vs. noncacheable
  powerpc/spufs: fix missed stop-and-signal event
  powerpc/spufs: synchronize interaction between spu exception handling and time slicing
  powerpc/spufs: remove class_0_dsisr from spu exception handling
  powerpc/spufs: wait for stable spu status in spu_stopped()
  [POWERPC] bootwrapper: add simpleImage* to list of boot targets
  [POWERPC] 83xx: MPC837xRDB's VSC7385 ethernet switch isn't on the MDIO bus
  [POWERPC] Updated Freescale PPC defconfigs
  [POWERPC] 8610: Update defconfig for MPC8610 HPCD
  [POWERPC] 85xx: MPC8548CDS - Fix size of PCIe IO space
  ...

11 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
Linus Torvalds [Mon, 16 Jun 2008 17:23:21 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  sound: oxygen: fix NULL pointer dereference when loading snd-oxygen

11 years agoMerge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
Linus Torvalds [Mon, 16 Jun 2008 17:22:31 +0000]
Merge branch 'upstream' of git://ftp.linux-mips.org/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] Au1200: MMC resource size off by one
  [MIPS] TANBAC: Update defconfig
  [MIPS] Vr41xx: Initialize PCI io_map_base
  [MIPS] Malta: Always compile MTD platform device registration code.
  [MIPS] Malta: Fix build errors for 64-bit kernels
  [MIPS] Lasat: sysctl fixup
  [MIPS] Fix buggy use of kmap_coherent.
  [MIPS] Lasat: bring back from the dead
  [MIPS] vpe_id is required for VSMP and SMTC builds
  [MIPS] Export smp_call_function and smp_call_function_single.
  [MIPS] Bring the SWARM defconfig up to date
  [MIPS] Sibyte: Build RTC support as an object
  [MIPS] Fix the fix for divide by zero error in build_{clear,copy}_page
  [MIPS] Fix build for PNX platforms.
  [MIPS] Add RM200 with R5000 CPU to known ARC machines
  [MIPS] Better load address for big endian SNI RM
  [MIPS] SB1250: Initialize io_map_base
  [MIPS] Alchemy: Add au1500 reserved interrupt
  [MIPS] Export empty_zero_page for sake of the ext4 module.

11 years agoExport <linux/a.out.h> to userspace again.
David Woodhouse [Mon, 16 Jun 2008 11:24:17 +0000]
Export <linux/a.out.h> to userspace again.

This seems to have been removed accidentally in commit
ed7b1889da256977574663689b598d88950bbd23 ("Unexport asm/page.h"), but
wasn't supposed to have been -- the original patch at
http://lkml.org/lkml/2007/10/30/144 just moved it from $(header-y) to
$(unifdef-y)

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoRemove #ifdef CONFIG_ARCH_SUPPORTS_AOUT from <linux/a.out.h>
David Woodhouse [Mon, 16 Jun 2008 11:18:24 +0000]
Remove #ifdef CONFIG_ARCH_SUPPORTS_AOUT from <linux/a.out.h>

This file is only included where it makes sense now, so there's no need
for the CONFIG_ARCH_SUPPORTS_AOUT conditional -- and that conditional is
bad, because we want to export <linux/a.out.h> to userspace.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoRemove last traces of a.out support from ELF loader.
David Woodhouse [Mon, 16 Jun 2008 11:18:13 +0000]
Remove last traces of a.out support from ELF loader.

In commit d20894a23708c2af75966534f8e4dedb46d48db2 ("Remove a.out
interpreter support in ELF loader"), Andi removed support for a.out
interpreters from the ELF loader, which was only ever needed for the
transition from a.out to ELF.

This removes the last traces of that support, in particular the
inclusion of <linux/a.out.h>.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoInclude <asm/a.out.h> in fs/exec.c only for Alpha.
David Woodhouse [Mon, 16 Jun 2008 11:11:54 +0000]
Include <asm/a.out.h> in fs/exec.c only for Alpha.

We only need it for the /sbin/loader hack for OSF/1 executables, and we
don't want to include it otherwise.

While we're at it, remove the redundant '&& CONFIG_ARCH_SUPPORTS_AOUT'
in the ifdef around that code. It's already dependent on __alpha__, and
CONFIG_ARCH_SUPPORTS_AOUT is hard-coded to 'y' there.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoMN10300: Kill linux/a.out.h inclusions
David Howells [Mon, 16 Jun 2008 12:36:29 +0000]
MN10300: Kill linux/a.out.h inclusions

Kill linux/a.out.h inclusions in the MN10300 arch code.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years ago[IA64] Fix CONFIG_IA64_SGI_UV build error
Jack Steiner [Sat, 14 Jun 2008 12:57:25 +0000]
[IA64] Fix CONFIG_IA64_SGI_UV build error

Fix build error in CONFIG_IA64_SGI_UV config. (GENERIC builds
are ok).

Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

11 years ago[MIPS] Au1200: MMC resource size off by one
Sergei Shtylyov [Thu, 8 May 2008 19:06:17 +0000]
[MIPS] Au1200: MMC resource size off by one

Au12x0 MMC platform device strangely claims 0x41 bytes for its
memory-mapped registers.  Make it claim the whole 0x80000 instead according
to the memory map given in the datasheets.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

11 years ago[MIPS] TANBAC: Update defconfig
Yoichi Yuasa [Mon, 16 Jun 2008 13:54:16 +0000]
[MIPS] TANBAC: Update defconfig

These boards need cca setup on CMDLINE.

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

11 years ago[MIPS] Vr41xx: Initialize PCI io_map_base
Yoichi Yuasa [Mon, 16 Jun 2008 13:51:08 +0000]
[MIPS] Vr41xx: Initialize PCI io_map_base

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

11 years ago[MIPS] Malta: Always compile MTD platform device registration code.
Ralf Baechle [Sun, 15 Jun 2008 23:23:39 +0000]
[MIPS] Malta: Always compile MTD platform device registration code.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

11 years ago[MIPS] Malta: Fix build errors for 64-bit kernels
Thomas Bogendoerfer [Thu, 29 May 2008 20:05:07 +0000]
[MIPS] Malta: Fix build errors for 64-bit kernels

Fix 64-bit Malta by using CKSEG0ADDR and correct casts.

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

11 years ago[MIPS] Lasat: sysctl fixup
Thomas Horsten [Sun, 15 Jun 2008 01:17:11 +0000]
[MIPS] Lasat: sysctl fixup

LASAT's sysctl interface was broken, it failed a check during boot because
a single entry had a sysctl number and the rest were unnumbered. When I
fixed it I noticed that the whole sysctl file needed a spring clean, it was
using mutexes where it wasn't needed (it's only needed to protect during
writes to the EEPROM), so I moved that stuff out and generally cleaned the
whole thing up.

So now, LASAT's sysctl/proc interface is working again.

Signed-off-by: Thomas Horsten <thomas@horsten.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

11 years ago[MIPS] Fix buggy use of kmap_coherent.
Ralf Baechle [Sat, 14 Jun 2008 21:22:08 +0000]
[MIPS] Fix buggy use of kmap_coherent.

Assuming the call of kmap_coherent in local_r4k_flush_cache_page doesn't
need fixing this was skipped in fcae549295bcae801ac48fc1c2030ab8cc487020.
Turns out it needed the same change after all.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

11 years ago[MIPS] Lasat: bring back from the dead
Thomas Horsten [Sat, 14 Jun 2008 01:32:42 +0000]
[MIPS] Lasat: bring back from the dead

After the common MIPS CPU interrupt controller (for irq0-7) was introduced
the Lasat boards didn't get their interrupts right, so nothing worked. The
old routines need to be offset by the new 8 hardware interrupts common to
all MIPS CPU's.

Signed-off-by: Thomas Horsten <thomas@horsten.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

11 years ago[MIPS] vpe_id is required for VSMP and SMTC builds
Chris Dearman [Sat, 17 May 2008 00:29:54 +0000]
[MIPS] vpe_id is required for VSMP and SMTC builds

Signed-off-by: Chris Dearman <chris@mips.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

11 years ago[MIPS] Export smp_call_function and smp_call_function_single.
Zenon Fortuna [Sat, 17 May 2008 00:29:48 +0000]
[MIPS] Export smp_call_function and smp_call_function_single.

Signed-off-by: Chris Dearman <chris@mips.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

11 years ago[MIPS] Bring the SWARM defconfig up to date
Maciej W. Rozycki [Thu, 12 Jun 2008 23:10:00 +0000]
[MIPS] Bring the SWARM defconfig up to date

 The SWARM defconfig file has not been regenerated for over a year now.
Here is a patch to bring the file up to date.  Additionally some important
and sometimes confusing changes happened meanwhile.  Here is the list of
notable corresponding updates to the configuration:

1. CPU_SB1_PASS_2_2 is now selected rather than CPU_SB1_PASS_1.  The
   latter requires a non-standard -msb1-pass1-workarounds option to be
   supported by GCC and I am told is quite rare anyway.

   [Ralf: Afaik -msb1-pass1-workarounds is available only in Monta Vista's
   special Sibyte gcc 3.0 variant and gcc 3.0 is too old to build a modern
   kernel anyway.]

2. PHYLIB and BROADCOM_PHY are both built in and NETDEV_1000 enabled as
   required by SB1250_MAC.

3. USB and USB_OHCI_HCD are enabled as there is an OHCI chip onboard.

4. TMPFS is enabled, because I use it. ;-)

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

11 years ago[MIPS] Sibyte: Build RTC support as an object
Maciej W. Rozycki [Thu, 12 Jun 2008 23:14:10 +0000]
[MIPS] Sibyte: Build RTC support as an object

 Build the SWARM platform library is as an object rather than an archive
so that files which only contain symbols used by initcalls and do not
provide any symbols that would pull them from an archive still work.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

11 years ago[MIPS] Fix the fix for divide by zero error in build_{clear,copy}_page
Atsushi Nemoto [Fri, 30 May 2008 04:07:21 +0000]
[MIPS] Fix the fix for divide by zero error in build_{clear,copy}_page

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

11 years ago[MIPS] Fix build for PNX platforms.
Ralf Baechle [Thu, 12 Jun 2008 16:26:02 +0000]
[MIPS] Fix build for PNX platforms.

Build error was caused by commit 351336929ccf222ae38ff0cb7a8dd5fd5c6236a0.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

11 years ago[MIPS] Add RM200 with R5000 CPU to known ARC machines
Thomas Bogendoerfer [Mon, 26 May 2008 23:15:20 +0000]
[MIPS] Add RM200 with R5000 CPU to known ARC machines

RM200 with R5ks have a little bit different arcname.

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

11 years ago[MIPS] Better load address for big endian SNI RM
Thomas Bogendoerfer [Mon, 26 May 2008 23:15:16 +0000]
[MIPS] Better load address for big endian SNI RM

Use better load address for big endian kernels to avoid clashes with
PROM / SASH.

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

11 years ago[MIPS] SB1250: Initialize io_map_base
Maciej W. Rozycki [Mon, 9 Jun 2008 16:20:03 +0000]
[MIPS] SB1250: Initialize io_map_base

Correctly initialize io_map_base for the SB1250 PCI controller as required
for proper iomap support.  Based on a proposal from Daniel Jacobowitz.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

11 years ago[MIPS] Alchemy: Add au1500 reserved interrupt
bruno randolf [Fri, 6 Jun 2008 14:42:03 +0000]
[MIPS] Alchemy: Add au1500 reserved interrupt

In the conversion done in the commits

  95c4eb3ef4484ca85da5c98780d358cffd546b90
  9d360ab4a7568a8d177280f651a8a772ae52b9b9

  [MIPS] Alchemy: Renumber interrupts so irq_cpu can work.

one reserved interrupt on au1500 was missed. this broke the au1000 ethernet
driver.

Signed-off-by: Bruno Randolf <br1@einfach.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

11 years ago[MIPS] Export empty_zero_page for sake of the ext4 module.
Ralf Baechle [Fri, 6 Jun 2008 13:23:06 +0000]
[MIPS] Export empty_zero_page for sake of the ext4 module.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

11 years agosound: oxygen: fix NULL pointer dereference when loading snd-oxygen
Clemens Ladisch [Mon, 16 Jun 2008 12:13:52 +0000]
sound: oxygen: fix NULL pointer dereference when loading snd-oxygen

Check that model->control_filter is set before trying to call it.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

11 years agoudf: restore UDFFS_DEBUG to being undefined by default
Paul Collins [Sat, 14 Jun 2008 02:14:59 +0000]
udf: restore UDFFS_DEBUG to being undefined by default

Commit 706047a79725b585cf272fdefc234b31b6545c72, "udf: Fix compilation
warnings when UDF debug is on" inadvertently (I assume) enabled
debugging messages by default for UDF.  This patch disables them again.

Signed-off-by: Paul Collins <paul@ondioline.org>
Signed-off-by: Jan Kara <jack@suse.cz>

11 years ago[POWERPC] Turn on ATA_SFF so we get SATA_SVW back in defconfigs
Paul Mackerras [Mon, 16 Jun 2008 11:14:12 +0000]
[POWERPC] Turn on ATA_SFF so we get SATA_SVW back in defconfigs

This enables CONFIG_ATA_SFF in the defconfigs that are intended to
work on a G5 powermac, i.e. g5_defconfig and ppc64_defconfig.  Since
the support for the SATA cell in the K2 chipset is provided by the
sata_svw.c driver, and that depends on CONFIG_ATA_SFF, we need to turn
that and CONFIG_SATA_SVW back on so we can get to the hard disk on G5s.

Signed-off-by: Paul Mackerras <paulus@samba.org>

11 years ago[POWERPC] Remove ppc32's export of console_drivers
Stephen Rothwell [Mon, 16 Jun 2008 00:50:13 +0000]
[POWERPC] Remove ppc32's export of console_drivers

There are no in-tree uses of the export any more and in linux-next there
is a change that exports it globally which causes warnings:

WARNING: vmlinux: 'console_drivers' exported twice. Previous export was in vmlinux

and in one case (mpc85xx_defconfig) a build error:

kernel/built-in.o: In function `__crc_console_drivers':
(*ABS*+0x1eb0e6f5): multiple definition of `__crc_console_drivers'

So remove the export now.  Also, there is no longer any need to include
linux/console.h.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>