8 years agomfd: Make TPS65910 usable without interrupts
Afzal Mohammed [Wed, 14 Dec 2011 10:35:35 +0000]
mfd: Make TPS65910 usable without interrupts

TPS65910 can be used without interrupts.
Hence let probe succeed in case interrupt can't be
configured and let Kernel only to complain about it

Signed-off-by: Afzal Mohammed <afzal@ti.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

8 years agomfd: Add power off functionality to TWL
Igor Grinberg [Sun, 13 Nov 2011 09:49:50 +0000]
mfd: Add power off functionality to TWL

TWL family of PMICs, used in master mode, have a power off
functionality. The resulting power off sequence shuts down all the SoC
supplies, LDOs, etc. The sequence is described in the datasheets
chapter "Power-Off Sequence".
Note, that board must be wired correctly for the power off to work as
expected.

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

8 years agomfd: twl-core: Add initial DT support for twl4030/twl6030
Benoit Cousson [Mon, 29 Aug 2011 14:20:23 +0000]
mfd: twl-core: Add initial DT support for twl4030/twl6030

Add initial device-tree support for twl familly chips.
The current version is missing the regulator entries due
to the lack of DT regulator bindings for the moment.
Only the simple sub-modules that do not depend on
platform_data information can be initialized properly.

Add irqdomain support.

Add documentation for the Texas Instruments TWL Integrated Chip.

Signed-off-by: Benoit Cousson <b-cousson@ti.com>
Cc: Balaji T K <balajitk@ti.com>
Cc: Graeme Gregory <gg@slimlogic.co.uk>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Acked-by: Rob Herring <rob.herring@calxeda.com>
[grant.likely@secretlab.ca: Fix IRQ_DOMAIN dependency in kconfig]
Cc: Grant Likely <grant.likely@secretlab.ca>

8 years agomfd: Return an error on failed wm831x register writes
Mark Brown [Mon, 5 Dec 2011 12:01:07 +0000]
mfd: Return an error on failed wm831x register writes

Got dropped in the regmap conversion.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

8 years agomfd: Convert WM8400 to devm_kzalloc()
Mark Brown [Sat, 3 Dec 2011 21:43:04 +0000]
mfd: Convert WM8400 to devm_kzalloc()

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

8 years agomfd: Unify abx500 headers in mfd/abx500
Linus Walleij [Fri, 2 Dec 2011 13:16:33 +0000]
mfd: Unify abx500 headers in mfd/abx500

This moves all the header files related to the abx500 family into
a common include directory below mfd. From now on we place any
subchip header in that directory. Headers previously in e.g.
<linux/mfd/ab8500/gpio.h> get prefixed and are now e.g.
<linux/mfd/abx500/ab8500-gpio.h>. The top-level abstract interface
remains in <linux/mfd/abx500.h>.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

8 years agomfd: Add missing mutex.h inclusion to WM8994 core.h
Mark Brown [Thu, 1 Dec 2011 13:56:53 +0000]
mfd: Add missing mutex.h inclusion to WM8994 core.h

struct wm8994 includes a mutex so we need to include mutex.h before we
declare it. All current users rely on this being done implicitly.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

8 years agomfd: Use gpio_request_one from twl6040-core
Axel Lin [Thu, 1 Dec 2011 01:55:07 +0000]
mfd: Use gpio_request_one from twl6040-core

Use gpio_request_one() instead of multiple gpiolib calls.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

8 years agomfd: Use gpio_request_one from omap-usb-host
Axel Lin [Thu, 1 Dec 2011 01:53:25 +0000]
mfd: Use gpio_request_one from omap-usb-host

Use gpio_request_one() instead of multiple gpiolib calls.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

8 years agomfd: Use gpio_request_one from dm355evm_msp
Axel Lin [Thu, 1 Dec 2011 01:49:07 +0000]
mfd: Use gpio_request_one from dm355evm_msp

Use gpio_request_one() instead of multiple gpiolib calls.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

8 years agomfd: Use gpio_request_one from aat2870-core
Axel Lin [Thu, 1 Dec 2011 01:47:54 +0000]
mfd: Use gpio_request_one from aat2870-core

Use gpio_request_one() instead of multiple gpiolib calls.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Jin Park <jinyoungp@nvidia.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

8 years agomfd: Convert to DEFINE_PCI_DEVICE_TABLE
Axel Lin [Thu, 1 Dec 2011 01:41:03 +0000]
mfd: Convert to DEFINE_PCI_DEVICE_TABLE

Convert static struct pci_device_id *[] to static DEFINE_PCI_DEVICE_TABLE
tables.

Cc: Andres Salomon <dilinger@queued.net>
Cc: Denis Turischev <denis@compulab.co.il>
Cc: Ben Dooks <ben@simtec.co.uk>
Cc: Vincent Sanders <vince@simtec.co.uk>
Cc: Mocean Laboratories <info@mocean-labs.com>
Cc: Harald Welte <HaraldWelte@viatech.com>
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

8 years agomfd: Add WM1811A device ID to wm8994 driver
Mark Brown [Wed, 30 Nov 2011 20:43:36 +0000]
mfd: Add WM1811A device ID to wm8994 driver

The WM1811A is a variant of the WM1811 with pin configuration changes.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

8 years agomfd: Add a dependency on HAVE_CLK for tc6393xb
Christoph Fritz [Tue, 29 Nov 2011 18:38:38 +0000]
mfd: Add a dependency on HAVE_CLK for tc6393xb

tc6393xb calls the clk API.

Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

8 years agomfd: Don't declare jz4740_adc_cells const
Axel Lin [Fri, 9 Dec 2011 03:28:56 +0000]
mfd: Don't declare jz4740_adc_cells const

Remove the const keyword to fix below warning:

CC drivers/mfd/jz4740-adc.o
drivers/mfd/jz4740-adc.c: In function 'jz4740_adc_probe':
drivers/mfd/jz4740-adc.c:290: warning: passing argument 3 of 'mfd_add_devices' discards qualifiers from pointer target type
include/linux/mfd/core.h:93: note: expected 'struct mfd_cell *' but argument is of type 'const struct mfd_cell *'

Also make jz4740_adc_cells static, is not used outside
this driver so no need to make the symbol global.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

8 years agomfd: Use standard device wakeup for handling max8998 wakeup device
Jonghwan Choi [Tue, 29 Nov 2011 08:17:51 +0000]
mfd: Use standard device wakeup for handling max8998 wakeup device

Use device_init_wakeup & device_may_wakeup to init wakeup

Signed-off-by: Jonghwan Choi <jhbird.choi@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

8 years agomfd: Constify WM8994 regulator_init_data
Mark Brown [Mon, 28 Nov 2011 23:26:47 +0000]
mfd: Constify WM8994 regulator_init_data

The driver has no need to modify the regulator_init_data so declare it
const to allow machine code to do so.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

8 years agomfd: Fix cs5535 section mismatch
Christian Gmeiner [Tue, 13 Dec 2011 20:30:04 +0000]
mfd: Fix cs5535 section mismatch

Silence following warnings:
WARNING: drivers/mfd/cs5535-mfd.o(.data+0x20): Section mismatch in
reference from the variable cs5535_mfd_drv to the function
.devinit.text:cs5535_mfd_probe()
The variable cs5535_mfd_drv references
the function __devinit cs5535_mfd_probe()
If the reference is valid then annotate the
variable with __init* or __refdata (see linux/init.h) or name the variable:
*driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console

WARNING: drivers/mfd/cs5535-mfd.o(.data+0x28): Section mismatch in
reference from the variable cs5535_mfd_drv to the function
.devexit.text:cs5535_mfd_remove()
The variable cs5535_mfd_drv references
the function __devexit cs5535_mfd_remove()
If the reference is valid then annotate the
variable with __exit* (see linux/init.h) or name the variable:
*driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console

Rename the variable from *_drv to *_driver so
modpost ignore the OK references to __devinit/__devexit
functions.

Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Acked-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

8 years agomfd: Add device tree probe support for mc13xxx
Shawn Guo [Mon, 12 Dec 2011 17:52:57 +0000]
mfd: Add device tree probe support for mc13xxx

This adds device tree probe support for mc13xxx mfd driver.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

8 years agoARM: sa1100: Refactor mcp-sa11x0 to use platform resources.
Jochen Friedrich [Sun, 27 Nov 2011 21:00:55 +0000]
ARM: sa1100: Refactor mcp-sa11x0 to use platform resources.

Make use of memory resources rather than hardcoded IO adresses.
This is a first step towards DT support.

Signed-off-by: Jochen Friedrich <jochen@scram.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

8 years agoARM: sa11x0: Implement autoloading of codec and codec pdata for mcp bus.
Jochen Friedrich [Sun, 27 Nov 2011 21:00:54 +0000]
ARM: sa11x0: Implement autoloading of codec and codec pdata for mcp bus.

Signed-off-by: Jochen Friedrich <jochen@scram.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

8 years agomfd: Fix twl4030-irq typo
NeilBrown [Sat, 26 Nov 2011 20:17:41 +0000]
mfd: Fix twl4030-irq typo

overwriten -> overwritten

Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

8 years agomfd: Set twl4030-irq tertiary interrupts to be nested/threaded.
NeilBrown [Sat, 26 Nov 2011 20:17:41 +0000]
mfd: Set twl4030-irq tertiary interrupts to be nested/threaded.

As tertiary interrupts are handled by handle_twl4030_sih calling
handle_nested_irq, they do not need their own separate irq thread.
So mark them as 'nested_thread' interrupts to avoid the extra thread
creation.

Tested on GTA04 Pheonux.

Signed-off-by: NeilBrown <neilb@suse.de>
Tested-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

8 years agomfd: Fixed unconditional reset of the mc13xxx ADC reading enable bits
Robin van der Gracht [Tue, 29 Nov 2011 11:09:03 +0000]
mfd: Fixed unconditional reset of the mc13xxx ADC reading enable bits

When the ADC is being prepared for a single or multiple channel reading,
the adc0 register is reconfigured without taking the lithium cell, charge
current and battery current reading enable bits into account. Which results
in clearing the bits.

Signed-off-by: Robin van der Gracht <robin@protonic.nl>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

8 years agomisc: Add driver support for MAX8997 MUIC
Donggeun Kim [Thu, 24 Nov 2011 09:12:18 +0000]
misc: Add driver support for MAX8997 MUIC

The MUIC function in MAX8997 device can be used as
a USB port detector and switch.
This patch supports the MUIC feature of MAX8997.

Signed-off-by: Donggeun Kim <dg77.kim@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

8 years agomfd: Add platform data for MAX8997 MUIC driver
Donggeun Kim [Thu, 24 Nov 2011 09:12:17 +0000]
mfd: Add platform data for MAX8997 MUIC driver

Currently, MAX8997 device does not support MUIC function of it.
To add MAX8997 MUIC driver, header file should be updated.

Signed-off-by: Donggeun Kim <dg77.kim@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

8 years agomfd: Convert WM8350 to devm_kzalloc()
Mark Brown [Thu, 8 Dec 2011 02:55:22 +0000]
mfd: Convert WM8350 to devm_kzalloc()

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

8 years agomfd: Store wm8350 struct in core device driver data
Mark Brown [Thu, 8 Dec 2011 02:55:21 +0000]
mfd: Store wm8350 struct in core device driver data

This will allow us to move to a more idiomatic MFD model as drivers
will be able to get the struct by looking at their parent device.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

8 years agomfd: Remove redundant spi driver bus initialization
Lars-Peter Clausen [Thu, 24 Nov 2011 15:29:15 +0000]
mfd: Remove redundant spi driver bus initialization

In ancient times it was necessary to manually initialize the bus field of an
spi_driver to spi_bus_type. These days this is done in spi_driver_register(),
so we can drop the manual assignment.

The patch was generated using the following coccinelle semantic patch:
// <smpl>
@@
identifier _driver;
@@
struct spi_driver _driver = {
.driver = {
- .bus = &spi_bus_type,
},
};
// </smpl>

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

8 years agomfd: Convert MFD drivers to use module_platform_driver
Mark Brown [Wed, 23 Nov 2011 22:58:34 +0000]
mfd: Convert MFD drivers to use module_platform_driver

Factors out some boilerplate code for drivers doing the default thing
for platform driver registration. Drivers using platform_driver_probe
or an initcall other than module_init can't be converted.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

8 years agomfd: Add basic device tree binding for wm8994
Mark Brown [Tue, 22 Nov 2011 18:59:28 +0000]
mfd: Add basic device tree binding for wm8994

Add a placeholder device tree binding for the wm8994 driver. At present
the binding is essentially null as none of the platform data is supported,
and at least some of that will depend on the pending regulator bindings.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

8 years agomfd: Convert 88pm860x to use regmap api
Jett.Zhou [Fri, 11 Nov 2011 07:38:27 +0000]
mfd: Convert 88pm860x to use regmap api

Convert the 88pm860x normal bank register read/write to
use the register map API.

Signed-off-by: Jett.Zhou <jtzhou@marvell.com>
Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

8 years agomfd: Fix 88pm860x test bank i2c interface bug
Jett.Zhou [Fri, 11 Nov 2011 07:38:26 +0000]
mfd: Fix 88pm860x test bank i2c interface bug

There are two banks in 88pm8607. One is the normal bank, and the other
one is the test bank, it means it have the same register address in the
normal bank and test bank seperately.
For test bank register, it needs a special I2C sequence to acess as below,
    Touching to 0xFA address
    Touching to 0xFB address
    Touching to 0xFF address
    Accessing bank register
    Touching to 0xFE address
    Touching to 0xFC address
This sequence can't be interrupted. It means that we can't use
i2c_transfef() to implement touching 0xFA address. Otherwise, other i2c
operation may be inserted into 0xFA and 0xFB operation since the lock of
i2c_adapter is already released.
So for test bank we implemented specific i2c read/write operation;

Signed-off-by: Jett.Zhou <jtzhou@marvell.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

8 years agomfd: Disable more pulls on WM8994
Mark Brown [Thu, 3 Nov 2011 13:41:14 +0000]
mfd: Disable more pulls on WM8994

Disable more pulls by default on WM8994 for a small current saving. Since
some designs do leave SPKMODE floating provide platform data to allow that
to be left enabled.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

8 years agomfd: Add support for irq over gpio pin to stmpe
Viresh Kumar [Tue, 8 Nov 2011 04:14:06 +0000]
mfd: Add support for irq over gpio pin to stmpe

On many boards, stmpe is present as an separate device (not as part of SoC).
Here gpio lines are mostly used for getting interrupts. This patch adds in
support to handle irq over gpio pin.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

8 years agomfd: Convert wm8994 to devm_kzalloc()
Mark Brown [Tue, 25 Oct 2011 12:47:41 +0000]
mfd: Convert wm8994 to devm_kzalloc()

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

8 years agomfd: Convert wm831x core driver to devm_kzalloc()
Mark Brown [Tue, 25 Oct 2011 12:47:40 +0000]
mfd: Convert wm831x core driver to devm_kzalloc()

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

8 years agoLinux 3.2
Linus Torvalds [Wed, 4 Jan 2012 23:55:44 +0000]
Linux 3.2

8 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Linus Torvalds [Wed, 4 Jan 2012 23:03:49 +0000]
Merge git://git./linux/kernel/git/davem/net

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  fix CAN MAINTAINERS SCM tree type
  mwifiex: fix crash during simultaneous scan and connect
  b43: fix regression in PIO case
  ath9k: Fix kernel panic in AR2427 in AP mode
  CAN MAINTAINERS update
  net: fsl: fec: fix build for mx23-only kernel
  sch_qfq: fix overflow in qfq_update_start()
  Revert "Bluetooth: Increase HCI reset timeout in hci_dev_do_close"

8 years agominixfs: misplaced checks lead to dentry leak
Al Viro [Wed, 4 Jan 2012 10:51:03 +0000]
minixfs: misplaced checks lead to dentry leak

bitmap size sanity checks should be done *before* allocating ->s_root;
there their cleanup on failure would be correct.  As it is, we do iput()
on root inode, but leak the root dentry...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Josh Boyer <jwboyer@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoptrace: ensure JOBCTL_STOP_SIGMASK is not zero after detach
Oleg Nesterov [Wed, 4 Jan 2012 16:29:20 +0000]
ptrace: ensure JOBCTL_STOP_SIGMASK is not zero after detach

This is the temporary simple fix for 3.2, we need more changes in this
area.

1. do_signal_stop() assumes that the running untraced thread in the
   stopped thread group is not possible. This was our goal but it is
   not yet achieved: a stopped-but-resumed tracee can clone the running
   thread which can initiate another group-stop.

   Remove WARN_ON_ONCE(!current->ptrace).

2. A new thread always starts with ->jobctl = 0. If it is auto-attached
   and this group is stopped, __ptrace_unlink() sets JOBCTL_STOP_PENDING
   but JOBCTL_STOP_SIGMASK part is zero, this triggers WANR_ON(!signr)
   in do_jobctl_trap() if another debugger attaches.

   Change __ptrace_unlink() to set the artificial SIGSTOP for report.

   Alternatively we could change ptrace_init_task() to copy signr from
   current, but this means we can copy it for no reason and hide the
   possible similar problems.

Acked-by: Tejun Heo <tj@kernel.org>
Cc: <stable@kernel.org> [3.1]
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoptrace: partially fix the do_wait(WEXITED) vs EXIT_DEAD->EXIT_ZOMBIE race
Oleg Nesterov [Wed, 4 Jan 2012 16:29:02 +0000]
ptrace: partially fix the do_wait(WEXITED) vs EXIT_DEAD->EXIT_ZOMBIE race

Test-case:

int main(void)
{
int pid, status;

pid = fork();
if (!pid) {
for (;;) {
if (!fork())
return 0;
if (waitpid(-1, &status, 0) < 0) {
printf("ERR!! wait: %m\n");
return 0;
}
}
}

assert(ptrace(PTRACE_ATTACH, pid, 0,0) == 0);
assert(waitpid(-1, NULL, 0) == pid);

assert(ptrace(PTRACE_SETOPTIONS, pid, 0,
PTRACE_O_TRACEFORK) == 0);

do {
ptrace(PTRACE_CONT, pid, 0, 0);
pid = waitpid(-1, NULL, 0);
} while (pid > 0);

return 1;
}

It fails because ->real_parent sees its child in EXIT_DEAD state
while the tracer is going to change the state back to EXIT_ZOMBIE
in wait_task_zombie().

The offending commit is 823b018e which moved the EXIT_DEAD check,
but in fact we should not blame it. The original code was not
correct as well because it didn't take ptrace_reparented() into
account and because we can't really trust ->ptrace.

This patch adds the additional check to close this particular
race but it doesn't solve the whole problem. We simply can't
rely on ->ptrace in this case, it can be cleared if the tracer
is multithreaded by the exiting ->parent.

I think we should kill EXIT_DEAD altogether, we should always
remove the soon-to-be-reaped child from ->children or at least
we should never do the DEAD->ZOMBIE transition. But this is too
complex for 3.2.

Reported-and-tested-by: Denys Vlasenko <vda.linux@googlemail.com>
Tested-by: Lukasz Michalik <lmi@ift.uni.wroc.pl>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: <stable@kernel.org> [3.0+]
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoMerge git://git.samba.org/sfrench/cifs-2.6
Linus Torvalds [Wed, 4 Jan 2012 22:57:55 +0000]
Merge git://git.samba.org/sfrench/cifs-2.6

* git://git.samba.org/sfrench/cifs-2.6:
  [CIFS] default ntlmv2 for cifs mount delayed to 3.3
  cifs: fix bad buffer length check in coalesce_t2

8 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirel...
John W. Linville [Wed, 4 Jan 2012 16:37:30 +0000]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless into for-davem

8 years agoRevert "rtc: Expire alarms after the time is set."
Linus Torvalds [Wed, 4 Jan 2012 15:57:22 +0000]
Revert "rtc: Expire alarms after the time is set."

This reverts commit 93b2ec0128c431148b216b8f7337c1a52131ef03.

The call to "schedule_work()" in rtc_initialize_alarm() happens too
early, and can cause oopses at bootup

Neil Brown explains why we do it:

  "If you set an alarm in the future, then shutdown and boot again after
   that time, then you will end up with a timer_queue node which is in
   the past.

   When this happens the queue gets stuck.  That entry-in-the-past won't
   get removed until and interrupt happens and an interrupt won't happen
   because the RTC only triggers an interrupt when the alarm is "now".

   So you'll find that e.g.  "hwclock" will always tell you that
   'select' timed out.

   So we force the interrupt work to happen at the start just in case."

and has a patch that convert it to do things in-process rather than with
the worker thread, but right now it's too late to play around with this,
so we just revert the patch that caused problems for now.

Reported-by: Sander Eikelenboom <linux@eikelenboom.it>
Requested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Requested-by: John Stultz <john.stultz@linaro.org>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years ago[CIFS] default ntlmv2 for cifs mount delayed to 3.3
Steve French [Wed, 4 Jan 2012 05:08:24 +0000]
[CIFS] default ntlmv2 for cifs mount delayed to 3.3

Turned out the ntlmv2 (default security authentication)
upgrade was harder to test than expected, and we ran
out of time to test against Apple and a few other servers
that we wanted to.  Delay upgrade of default security
from ntlm to ntlmv2 (on mount) to 3.3.  Still works
fine to specify it explicitly via "sec=ntlmv2" so this
should be fine.

Acked-by: Jeff Layton <jlayton@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>

8 years agocifs: fix bad buffer length check in coalesce_t2
Jeff Layton [Sun, 1 Jan 2012 15:34:39 +0000]
cifs: fix bad buffer length check in coalesce_t2

The current check looks to see if the RFC1002 length is larger than
CIFSMaxBufSize, and fails if it is. The buffer is actually larger than
that by MAX_CIFS_HDR_SIZE.

This bug has been around for a long time, but the fact that we used to
cap the clients MaxBufferSize at the same level as the server tended
to paper over it. Commit c974befa changed that however and caused this
bug to bite in more cases.

Reported-and-Tested-by: Konstantinos Skarlatos <k.skarlatos@gmail.com>
Tested-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>

8 years agoRevert "rtc: Disable the alarm in the hardware"
Linus Torvalds [Wed, 4 Jan 2012 01:32:13 +0000]
Revert "rtc: Disable the alarm in the hardware"

This reverts commit c0afabd3d553c521e003779c127143ffde55a16f.

It causes failures on Toshiba laptops - instead of disabling the alarm,
it actually seems to enable it on the affected laptops, resulting in
(for example) the laptop powering on automatically five minutes after
shutdown.

There's a patch for it that appears to work for at least some people,
but it's too late to play around with this, so revert for now and try
again in the next merge window.

See for example

http://bugs.debian.org/652869

Reported-and-bisected-by: Andreas Friedrich <afrie@gmx.net> (Toshiba Tecra)
Reported-by: Antonio-M. Corbi Bellot <antonio.corbi@ua.es> (Toshiba Portege R500)
Reported-by: Marco Santos <marco.santos@waynext.com> (Toshiba Portege Z830)
Reported-by: Christophe Vu-Brugier <cvubrugier@yahoo.fr>  (Toshiba Portege R830)
Cc: Jonathan Nieder <jrnieder@gmail.com>
Requested-by: John Stultz <john.stultz@linaro.org>
Cc: stable@kernel.org # for the versions that applied this
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agohung_task: fix false positive during vfork
Mandeep Singh Baines [Tue, 3 Jan 2012 22:41:13 +0000]
hung_task: fix false positive during vfork

vfork parent uninterruptibly and unkillably waits for its child to
exec/exit. This wait is of unbounded length. Ignore such waits
in the hung_task detector.

Signed-off-by: Mandeep Singh Baines <msb@chromium.org>
Reported-by: Sasha Levin <levinsasha928@gmail.com>
LKML-Reference: <1325344394.28904.43.camel@lappy>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: John Kacur <jkacur@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agosecurity: Fix security_old_inode_init_security() when CONFIG_SECURITY is not set
Jan Kara [Tue, 3 Jan 2012 12:14:29 +0000]
security: Fix security_old_inode_init_security() when CONFIG_SECURITY is not set

Commit 1e39f384bb01 ("evm: fix build problems") makes the stub version
of security_old_inode_init_security() return 0 when CONFIG_SECURITY is
not set.

But that makes callers such as reiserfs_security_init() assume that
security_old_inode_init_security() has set name, value, and len
arguments properly - but security_old_inode_init_security() left them
uninitialized which then results in interesting failures.

Revert security_old_inode_init_security() to the old behavior of
returning EOPNOTSUPP since both callers (reiserfs and ocfs2) handle this
just fine.

[ Also fixed the S_PRIVATE(inode) case of the actual non-stub
  security_old_inode_init_security() function to return EOPNOTSUPP
  for the same reason, as pointed out by Mimi Zohar.

  It got incorrectly changed to match the new function in commit
  fb88c2b6cbb1: "evm: fix security/security_old_init_security return
  code".   - Linus ]

Reported-by: Jorge Bastos <mysql.jorge@decimal.pt>
Acked-by: James Morris <jmorris@namei.org>
Acked-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agofix CAN MAINTAINERS SCM tree type
Oliver Hartkopp [Tue, 3 Jan 2012 19:57:43 +0000]
fix CAN MAINTAINERS SCM tree type

As pointed out by Joe Perches the SCM tree type was missing in my patch.

Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>

CC: Oliver Hartkopp <oliver.hartkopp@volkswagen.de>
CC: Urs Thuermann <urs.thuermann@volkswagen.de>
CC: Wolfgang Grandegger <wg@grandegger.com>
CC: Marc Kleine-Budde <mkl@pengutronix.de>
CC: linux-can@vger.kernel.org

8 years agomwifiex: fix crash during simultaneous scan and connect
Amitkumar Karwar [Tue, 3 Jan 2012 00:18:40 +0000]
mwifiex: fix crash during simultaneous scan and connect

If 'iw connect' command is fired when driver is already busy in
serving 'iw scan' command, ssid specific scan operation for connect
is skipped. In this case cmd wait queue handler gets called with no
command in queue (i.e. adapter->cmd_queued = NULL).

This patch adds a NULL check in mwifiex_wait_queue_complete()
routine to fix crash observed during simultaneous scan and assoc
operations.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agob43: fix regression in PIO case
Guennadi Liakhovetski [Mon, 26 Dec 2011 17:28:08 +0000]
b43: fix regression in PIO case

This patch fixes the regression, introduced by

commit 17030f48e31adde5b043741c91ba143f5f7db0fd
From: Rafał Miłecki <zajec5@gmail.com>
Date: Thu, 11 Aug 2011 17:16:27 +0200
Subject: [PATCH] b43: support new RX header, noticed to be used in 598.314+ fw

in PIO case.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agoath9k: Fix kernel panic in AR2427 in AP mode
Mohammed Shafi Shajakhan [Mon, 26 Dec 2011 05:12:15 +0000]
ath9k: Fix kernel panic in AR2427 in AP mode

don't do aggregation related stuff for 'AP mode client power save
handling' if aggregation is not enabled in the driver, otherwise it
will lead to panic because those data structures won't be never
intialized in 'ath_tx_node_init' if aggregation is disabled

EIP is at ath_tx_aggr_wakeup+0x37/0x80 [ath9k]
EAX: e8c09a20 EBX: f2a304e8 ECX: 00000001 EDX: 00000000
ESI: e8c085e0 EDI: f2a304ac EBP: f40e1ca4 ESP: f40e1c8c
DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
Process swapper/1 (pid: 0, ti=f40e0000 task=f408e860
task.ti=f40dc000)
Stack:
0001e966 e8c09a20 00000000 f2a304ac e8c085e0 f2a304ac
f40e1cb0 f8186741
f8186700 f40e1d2c f922988d f2a304ac 00000202 00000001
c0b4ba43 00000000
0000000f e8eb75c0 e8c085e0 205b0001 34383220 f2a304ac
f2a30000 00010020
Call Trace:
[<f8186741>] ath9k_sta_notify+0x41/0x50 [ath9k]
[<f8186700>] ? ath9k_get_survey+0x110/0x110 [ath9k]
[<f922988d>] ieee80211_sta_ps_deliver_wakeup+0x9d/0x350
[mac80211]
[<c018dc75>] ? __module_address+0x95/0xb0
[<f92465b3>] ap_sta_ps_end+0x63/0xa0 [mac80211]
[<f9246746>] ieee80211_rx_h_sta_process+0x156/0x2b0
[mac80211]
[<f9247d1e>] ieee80211_rx_handlers+0xce/0x510 [mac80211]
[<c018440b>] ? trace_hardirqs_on+0xb/0x10
[<c056936e>] ? skb_queue_tail+0x3e/0x50
[<f9248271>] ieee80211_prepare_and_rx_handle+0x111/0x750
[mac80211]
[<f9248bf9>] ieee80211_rx+0x349/0xb20 [mac80211]
[<f9248949>] ? ieee80211_rx+0x99/0xb20 [mac80211]
[<f818b0b8>] ath_rx_tasklet+0x818/0x1d00 [ath9k]
[<f8187a75>] ? ath9k_tasklet+0x35/0x1c0 [ath9k]
[<f8187a75>] ? ath9k_tasklet+0x35/0x1c0 [ath9k]
[<f8187b33>] ath9k_tasklet+0xf3/0x1c0 [ath9k]
[<c0151b7e>] tasklet_action+0xbe/0x180

Cc: stable@kernel.org
Cc: Senthil Balasubramanian <senthilb@qca.qualcomm.com>
Cc: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Reported-by: Ashwin Mendonca <ashwinloyal@gmail.com>
Tested-by: Ashwin Mendonca <ashwinloyal@gmail.com>
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth
John W. Linville [Tue, 3 Jan 2012 19:26:56 +0000]
Merge branch 'master' of git://git./linux/kernel/git/padovan/bluetooth

8 years agoCAN MAINTAINERS update
Oliver Hartkopp [Tue, 3 Jan 2012 08:40:28 +0000]
CAN MAINTAINERS update

Update the CAN MAINTAINERS section:

- point out active maintainers
- pull the CAN driver discussion away from netdev ML
- point to the new CAN web site on gitorious.org
- add CAN development git repository URL to submit patches

Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>

CC: Oliver Hartkopp <oliver.hartkopp@volkswagen.de>
CC: Urs Thuermann <urs.thuermann@volkswagen.de>
CC: Wolfgang Grandegger <wg@grandegger.com>
CC: Marc Kleine-Budde <mkl@pengutronix.de>
CC: linux-can@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet: fsl: fec: fix build for mx23-only kernel
Wolfram Sang [Tue, 3 Jan 2012 03:46:47 +0000]
net: fsl: fec: fix build for mx23-only kernel

If one only selects mx23-based boards, compile fails:

drivers/net/ethernet/freescale/fec.c:410:2: error: 'FEC_HASH_TABLE_HIGH' undeclared (first use in this function)
drivers/net/ethernet/freescale/fec.c:411:2: error: 'FEC_HASH_TABLE_LOW' undeclared (first use in this function)

This is because fec.h uses CONFIG_SOC_IMX28 to determine the register
layout of the core which makes sense since the MX23 does not have a fec.
However, Kconfig uses the broader ARCH_MXS symbol and this way even
makes the fec-driver default for MX23. Adapt Kconfig to use the more
precise SOC_IMX28 as well.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: David S. Miller <davem@davemloft.net>
Acked-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agosch_qfq: fix overflow in qfq_update_start()
Eric Dumazet [Mon, 2 Jan 2012 05:47:57 +0000]
sch_qfq: fix overflow in qfq_update_start()

grp->slot_shift is between 22 and 41, so using 32bit wide variables is
probably a typo.

This could explain QFQ hangs Dave reported to me, after 2^23 packets ?

(23 = 64 - 41)

Reported-by: Dave Taht <dave.taht@gmail.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Stephen Hemminger <shemminger@vyatta.com>
CC: Dave Taht <dave.taht@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agodrm/radeon/kms/atom: fix possible segfault in pm setup
Alexander Müller [Fri, 30 Dec 2011 17:55:48 +0000]
drm/radeon/kms/atom: fix possible segfault in pm setup

If we end up with no power states, don't look up
current vddc.

fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=44130

agd5f: fix patch formatting

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

8 years agoMerge branch 'devicetree/merge' of git://git.secretlab.ca/git/linux-2.6
Linus Torvalds [Mon, 2 Jan 2012 20:34:03 +0000]
Merge branch 'devicetree/merge' of git://git.secretlab.ca/git/linux-2.6

* 'devicetree/merge' of git://git.secretlab.ca/git/linux-2.6:
  dt/device: Fix auxdata matching to handle entries without a name override

8 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Linus Torvalds [Mon, 2 Jan 2012 03:36:08 +0000]
Merge git://git./linux/kernel/git/davem/net

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  netfilter: ctnetlink: fix timeout calculation
  ipvs: try also real server with port 0 in backup server
  skge: restore rx multicast filter on resume and after config changes
  mlx4_en: nullify cq->vector field when closing completion queue

8 years agoMerge branch 'fix/asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Linus Torvalds [Sat, 31 Dec 2011 19:55:06 +0000]
Merge branch 'fix/asoc' of git://git./linux/kernel/git/tiwai/sound

* 'fix/asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ASoC: wm8776: add missing break in sample size switch

8 years agogspca: Fix falling back to lower isoc alt settings
Mauro Carvalho Chehab [Sat, 31 Dec 2011 13:32:03 +0000]
gspca: Fix falling back to lower isoc alt settings

The current gspca core code has a regression where it no longer properly
falls back to lower alt settings when there is not enough bandwidth.

This causes many iso based usb-1 cameras to not work when plugged into a
usb2 hub or a sandybridge chipset motherboard!

This patch fixes this.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agofutex: Fix uninterruptible loop due to gate_area
Hugh Dickins [Sat, 31 Dec 2011 19:44:01 +0000]
futex: Fix uninterruptible loop due to gate_area

It was found (by Sasha) that if you use a futex located in the gate
area we get stuck in an uninterruptible infinite loop, much like the
ZERO_PAGE issue.

While looking at this problem, PeterZ realized you'll get into similar
trouble when hitting any install_special_pages() mapping.  And are there
still drivers setting up their own special mmaps without page->mapping,
and without special VM or pte flags to make get_user_pages fail?

In most cases, if page->mapping is NULL, we do not need to retry at all:
Linus points out that even /proc/sys/vm/drop_caches poses no problem,
because it ends up using remove_mapping(), which takes care not to
interfere when the page reference count is raised.

But there is still one case which does need a retry: if memory pressure
called shmem_writepage in between get_user_pages_fast dropping page
table lock and our acquiring page lock, then the page gets switched from
filecache to swapcache (and ->mapping set to NULL) whatever the refcount.
Fault it back in to get the page->mapping needed for key->shared.inode.

Reported-by: Sasha Levin <levinsasha928@gmail.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agonetfilter: ctnetlink: fix timeout calculation
Xi Wang [Fri, 30 Dec 2011 15:40:17 +0000]
netfilter: ctnetlink: fix timeout calculation

The sanity check (timeout < 0) never works; the dividend is unsigned
and so is the division, which should have been a signed division.

long timeout = (ct->timeout.expires - jiffies) / HZ;
if (timeout < 0)
timeout = 0;

This patch converts the time values to signed for the division.

Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

8 years agoipvs: try also real server with port 0 in backup server
Julian Anastasov [Fri, 30 Dec 2011 05:19:02 +0000]
ipvs: try also real server with port 0 in backup server

We should not forget to try for real server with port 0
in the backup server when processing the sync message. We should
do it in all cases because the backup server can use different
forwarding method.

Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

8 years agoskge: restore rx multicast filter on resume and after config changes
Florian Zumbiehl [Fri, 30 Dec 2011 17:30:09 +0000]
skge: restore rx multicast filter on resume and after config changes

Restore skge hardware registers for multicast filtering to their
appropriate values after system resume and after hardware restarts
that are done when changing certain settings.

Signed-off-by: Florian Zumbiehl <florz@florz.de>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agomlx4_en: nullify cq->vector field when closing completion queue
Yevgeny Petrilin [Thu, 29 Dec 2011 05:49:58 +0000]
mlx4_en: nullify cq->vector field when closing completion queue

Caused loss of connectivity when changing ring size.

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoMerge branch 'fixes' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur...
Linus Torvalds [Fri, 30 Dec 2011 21:45:34 +0000]
Merge branch 'fixes' of ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm

* 'fixes' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm:
  ARM: 7237/1: PL330: Fix driver freeze
  ARM: 7197/1: errata: Remove SMP dependency for erratum 751472
  ARM: 7196/1: errata: Remove SMP dependency for erratum 720789
  ARM: 7220/1: mmc: mmci: Fixup error handling for dma
  ARM: 7214/1: mmc: mmci: Fixup handling of MCI_STARTBITERR

8 years agoMerge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Linus Torvalds [Fri, 30 Dec 2011 21:43:45 +0000]
Merge branch 'fixes' of git://git./linux/kernel/git/arm/arm-soc

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: plat-orion: make gpiochip label unique
  enable uncompress log on cpuimx35sd
  cpuimx35: fix touchscreen support
  cpuimx35sd: fix Kconfig
  clock-imx35: fix reboot in internal boot mode
  dma: MX3_IPU fix depends
  imx_v4_v5_defconfig: update default configuration
  cpuimx25sd: fix Kconfig
  arm/imx: fix cpufreq section mismatch
  ARM:imx:fix pwm period value
  ARM: OMAP: hwmod data: fix iva and mailbox hwmods for OMAP 3

8 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Linus Torvalds [Fri, 30 Dec 2011 21:42:41 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: sentelic - fix retrieving number of buttons
  Input: sentelic - release mutex upon register write failure

8 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph...
Linus Torvalds [Fri, 30 Dec 2011 21:34:22 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/sage/ceph-client

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  ceph: disable use of dcache for readdir etc.

8 years agoMerge branch 'v3.2-samsung-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 30 Dec 2011 21:34:00 +0000]
Merge branch 'v3.2-samsung-fixes-4' of git://git./linux/kernel/git/kgene/linux-samsung

* 'v3.2-samsung-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: EXYNOS: Remove duplicated SROMC static memory mapping
  ARM: SAMSUNG: Fix build error when selecting CPU_FREQ_S3C24XX_DEBUGFS on S3C2440

8 years agoRevert "clockevents: Set noop handler in clockevents_exchange_device()"
Linus Torvalds [Fri, 30 Dec 2011 21:24:40 +0000]
Revert "clockevents: Set noop handler in clockevents_exchange_device()"

This reverts commit de28f25e8244c7353abed8de0c7792f5f883588c.

It results in resume problems for various people. See for example

  http://thread.gmane.org/gmane.linux.kernel/1233033
  http://thread.gmane.org/gmane.linux.kernel/1233389
  http://thread.gmane.org/gmane.linux.kernel/1233159
  http://thread.gmane.org/gmane.linux.kernel/1227868/focus=1230877

and the fedora and ubuntu bug reports

  https://bugzilla.redhat.com/show_bug.cgi?id=767248
  https://bugs.launchpad.net/ubuntu/+source/linux/+bug/904569

which got bisected down to the stable version of this commit.

Reported-by: Jonathan Nieder <jrnieder@gmail.com>
Reported-by: Phil Miller <mille121@illinois.edu>
Reported-by: Philip Langdale <philipl@overt.org>
Reported-by: Tim Gardner <tim.gardner@canonical.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Greg KH <gregkh@suse.de>
Cc: stable@kernel.org # for stable kernels that applied the original
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoMerge git://www.linux-watchdog.org/linux-watchdog
Linus Torvalds [Fri, 30 Dec 2011 20:13:03 +0000]
Merge git://www.linux-watchdog.org/linux-watchdog

* git://www.linux-watchdog.org/linux-watchdog:
  watchdog: iTCO_wdt.c - problems with newer hardware due to SMI clearing (part 2)
  watchdog: hpwdt: Changes to handle NX secure bit in 32bit path
  watchdog: sp805: Fix section mismatch in ID table.
  watchdog: move coh901327 state holders

8 years agoMerge branch 'iommu/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/joro...
Linus Torvalds [Fri, 30 Dec 2011 01:36:15 +0000]
Merge branch 'iommu/fixes' of git://git./linux/kernel/git/joro/iommu

* 'iommu/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu: Initialize domain->handler in iommu_domain_alloc()

8 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Linus Torvalds [Fri, 30 Dec 2011 01:35:33 +0000]
Merge git://git./linux/kernel/git/davem/net

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  packet: fix possible dev refcnt leak when bind fail
  netem: dont call vfree() under spinlock and BH disabled
  netfilter: ctnetlink: fix scheduling while atomic if helper is autoloaded
  netfilter: ctnetlink: fix return value of ctnetlink_get_expect()

8 years agoMerge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 30 Dec 2011 01:09:16 +0000]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86: Fix raw_spin_unlock_irqrestore() usage
  oprofile, arm/sh: Fix oprofile_arch_exit() linkage issue

8 years agoMerge branch 'for-linus' of git://oss.sgi.com/xfs/xfs
Linus Torvalds [Fri, 30 Dec 2011 01:05:45 +0000]
Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfs

* 'for-linus' of git://oss.sgi.com/xfs/xfs:
  xfs: log all dirty inodes in xfs_fs_sync_fs
  xfs: log the inode in ->write_inode calls for kupdate

8 years agoMerge branch 'for-linus' of git://git.kernel.dk/linux-block
Linus Torvalds [Fri, 30 Dec 2011 00:33:37 +0000]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block

* 'for-linus' of git://git.kernel.dk/linux-block:
  block: fix blk_queue_end_tag()
  block: re-use existing 'reading' variable instead of checking direction again
  block, cfq: fix empty queue crash caused by request merge

8 years agomm: hugetlb: fix non-atomic enqueue of huge page
Hillf Danton [Wed, 28 Dec 2011 23:57:16 +0000]
mm: hugetlb: fix non-atomic enqueue of huge page

If a huge page is enqueued under the protection of hugetlb_lock, then the
operation is atomic and safe.

Signed-off-by: Hillf Danton <dhillf@gmail.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: <stable@vger.kernel.org> [2.6.37+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoprocfs: do not confuse jiffies with cputime64_t
Andreas Schwab [Wed, 28 Dec 2011 23:57:15 +0000]
procfs: do not confuse jiffies with cputime64_t

Commit 2a95ea6c0d129b4 ("procfs: do not overflow get_{idle,iowait}_time
for nohz") did not take into account that one some architectures jiffies
and cputime use different units.

This causes get_idle_time() to return numbers in the wrong units, making
the idle time fields in /proc/stat wrong.

Instead of converting the usec value returned by
get_cpu_{idle,iowait}_time_us to units of jiffies, use the new function
usecs_to_cputime64 to convert it to the correct unit of cputime64_t.

Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "Artem S. Tashkinov" <t.artem@mailcity.com>
Cc: Dave Jones <davej@redhat.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agomm/mempolicy.c: refix mbind_range() vma issue
KOSAKI Motohiro [Wed, 28 Dec 2011 23:57:11 +0000]
mm/mempolicy.c: refix mbind_range() vma issue

commit 8aacc9f550 ("mm/mempolicy.c: fix pgoff in mbind vma merge") is the
slightly incorrect fix.

Why? Think following case.

1. map 4 pages of a file at offset 0

   [0123]

2. map 2 pages just after the first mapping of the same file but with
   page offset 2

   [0123][23]

3. mbind() 2 pages from the first mapping at offset 2.
   mbind_range() should treat new vma is,

   [0123][23]
     |23|
     mbind vma

   but it does

   [0123][23]
     |01|
     mbind vma

   Oops. then, it makes wrong vma merge and splitting ([01][0123] or similar).

This patch fixes it.

[testcase]
  test result - before the patch

case4: 126: test failed. expect '2,4', actual '2,2,2'
        case5: passed
case6: passed
case7: passed
case8: passed
case_n: 246: test failed. expect '4,2', actual '1,4'

------------[ cut here ]------------
kernel BUG at mm/filemap.c:135!
invalid opcode: 0000 [#4] SMP DEBUG_PAGEALLOC

(snip long bug on messages)

  test result - after the patch

case4: passed
        case5: passed
case6: passed
case7: passed
case8: passed
case_n: passed

  source:  mbind_vma_test.c
============================================================
 #include <numaif.h>
 #include <numa.h>
 #include <sys/mman.h>
 #include <stdio.h>
 #include <unistd.h>
 #include <stdlib.h>
 #include <string.h>

static unsigned long pagesize;
void* mmap_addr;
struct bitmask *nmask;
char buf[1024];
FILE *file;
char retbuf[10240] = "";
int mapped_fd;

char *rubysrc = "ruby -e '\
  pid = %d; \
  vstart = 0x%llx; \
  vend = 0x%llx; \
  s = `pmap -q #{pid}`; \
  rary = []; \
  s.each_line {|line|; \
    ary=line.split(\" \"); \
    addr = ary[0].to_i(16); \
    if(vstart <= addr && addr < vend) then \
      rary.push(ary[1].to_i()/4); \
    end; \
  }; \
  print rary.join(\",\"); \
'";

void init(void)
{
void* addr;
char buf[128];

nmask = numa_allocate_nodemask();
numa_bitmask_setbit(nmask, 0);

pagesize = getpagesize();

sprintf(buf, "%s", "mbind_vma_XXXXXX");
mapped_fd = mkstemp(buf);
if (mapped_fd == -1)
perror("mkstemp "), exit(1);
unlink(buf);

if (lseek(mapped_fd, pagesize*8, SEEK_SET) < 0)
perror("lseek "), exit(1);
if (write(mapped_fd, "\0", 1) < 0)
perror("write "), exit(1);

addr = mmap(NULL, pagesize*8, PROT_NONE,
    MAP_SHARED, mapped_fd, 0);
if (addr == MAP_FAILED)
perror("mmap "), exit(1);

if (mprotect(addr+pagesize, pagesize*6, PROT_READ|PROT_WRITE) < 0)
perror("mprotect "), exit(1);

mmap_addr = addr + pagesize;

/* make page populate */
memset(mmap_addr, 0, pagesize*6);
}

void fin(void)
{
void* addr = mmap_addr - pagesize;
munmap(addr, pagesize*8);

memset(buf, 0, sizeof(buf));
memset(retbuf, 0, sizeof(retbuf));
}

void mem_bind(int index, int len)
{
int err;

err = mbind(mmap_addr+pagesize*index, pagesize*len,
    MPOL_BIND, nmask->maskp, nmask->size, 0);
if (err)
perror("mbind "), exit(err);
}

void mem_interleave(int index, int len)
{
int err;

err = mbind(mmap_addr+pagesize*index, pagesize*len,
    MPOL_INTERLEAVE, nmask->maskp, nmask->size, 0);
if (err)
perror("mbind "), exit(err);
}

void mem_unbind(int index, int len)
{
int err;

err = mbind(mmap_addr+pagesize*index, pagesize*len,
    MPOL_DEFAULT, NULL, 0, 0);
if (err)
perror("mbind "), exit(err);
}

void Assert(char *expected, char *value, char *name, int line)
{
if (strcmp(expected, value) == 0) {
fprintf(stderr, "%s: passed\n", name);
return;
}
else {
fprintf(stderr, "%s: %d: test failed. expect '%s', actual '%s'\n",
name, line,
expected, value);
// exit(1);
}
}

/*
      AAAA
    PPPPPPNNNNNN
    might become
    PPNNNNNNNNNN
    case 4 below
*/
void case4(void)
{
init();
sprintf(buf, rubysrc, getpid(), mmap_addr, mmap_addr+pagesize*6);

mem_bind(0, 4);
mem_unbind(2, 2);

file = popen(buf, "r");
fread(retbuf, sizeof(retbuf), 1, file);
Assert("2,4", retbuf, "case4", __LINE__);

fin();
}

/*
       AAAA
 PPPPPPNNNNNN
 might become
 PPPPPPPPPPNN
 case 5 below
*/
void case5(void)
{
init();
sprintf(buf, rubysrc, getpid(), mmap_addr, mmap_addr+pagesize*6);

mem_bind(0, 2);
mem_bind(2, 2);

file = popen(buf, "r");
fread(retbuf, sizeof(retbuf), 1, file);
Assert("4,2", retbuf, "case5", __LINE__);

fin();
}

/*
    AAAA
PPPPNNNNXXXX
might become
PPPPPPPPPPPP 6
*/
void case6(void)
{
init();
sprintf(buf, rubysrc, getpid(), mmap_addr, mmap_addr+pagesize*6);

mem_bind(0, 2);
mem_bind(4, 2);
mem_bind(2, 2);

file = popen(buf, "r");
fread(retbuf, sizeof(retbuf), 1, file);
Assert("6", retbuf, "case6", __LINE__);

fin();
}

/*
    AAAA
PPPPNNNNXXXX
might become
PPPPPPPPXXXX 7
*/
void case7(void)
{
init();
sprintf(buf, rubysrc, getpid(), mmap_addr, mmap_addr+pagesize*6);

mem_bind(0, 2);
mem_interleave(4, 2);
mem_bind(2, 2);

file = popen(buf, "r");
fread(retbuf, sizeof(retbuf), 1, file);
Assert("4,2", retbuf, "case7", __LINE__);

fin();
}

/*
    AAAA
PPPPNNNNXXXX
might become
PPPPNNNNNNNN 8
*/
void case8(void)
{
init();
sprintf(buf, rubysrc, getpid(), mmap_addr, mmap_addr+pagesize*6);

mem_bind(0, 2);
mem_interleave(4, 2);
mem_interleave(2, 2);

file = popen(buf, "r");
fread(retbuf, sizeof(retbuf), 1, file);
Assert("2,4", retbuf, "case8", __LINE__);

fin();
}

void case_n(void)
{
init();
sprintf(buf, rubysrc, getpid(), mmap_addr, mmap_addr+pagesize*6);

/* make redundunt mappings [0][1234][34][7] */
mmap(mmap_addr + pagesize*4, pagesize*2, PROT_READ|PROT_WRITE,
     MAP_FIXED|MAP_SHARED, mapped_fd, pagesize*3);

/* Expect to do nothing. */
mem_unbind(2, 2);

file = popen(buf, "r");
fread(retbuf, sizeof(retbuf), 1, file);
Assert("4,2", retbuf, "case_n", __LINE__);

fin();
}

int main(int argc, char** argv)
{
case4();
case5();
case6();
case7();
case8();
case_n();

return 0;
}
=============================================================

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Caspar Zhang <caspar@casparzhang.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: <stable@vger.kernel.org> [3.1.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agogspca: Fix bulk mode cameras no longer working (regression fix)
Hans de Goede [Thu, 29 Dec 2011 21:09:21 +0000]
gspca: Fix bulk mode cameras no longer working (regression fix)

The new iso bandwidth calculation code accidentally has broken support
for bulk mode cameras. This has broken the following drivers:
finepix, jeilinj, ovfx2, ov534, ov534_9, se401, sq905, sq905c, sq930x,
stv0680, vicam.

Thix patch fixes this. Fix tested with: se401, sq905, sq905c, stv0680 & vicam
cams.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoInput: sentelic - fix retrieving number of buttons
Tai-hwa Liang [Thu, 29 Dec 2011 17:47:36 +0000]
Input: sentelic - fix retrieving number of buttons

Fixing wrong register offset which is used to retrieve the number of buttons
attached to the hardware.

Signed-off-by: Tai-hwa Liang <avatar@sentelic.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

8 years agoceph: disable use of dcache for readdir etc.
Sage Weil [Thu, 29 Dec 2011 16:05:14 +0000]
ceph: disable use of dcache for readdir etc.

Ceph attempts to use the dcache to satisfy negative lookups and readdir
when the entire directory contents are in cache.  Disable this behavior
until lingering bugs in this code are shaken out; we'll re-enable these
hooks once things are fully stable.

Signed-off-by: Sage Weil <sage@newdream.net>

8 years agoblock: fix blk_queue_end_tag()
Dan Williams [Thu, 29 Dec 2011 08:16:28 +0000]
block: fix blk_queue_end_tag()

Commit 5e081591 "block: warn if tag is greater than real_max_depth"
cleaned up blk_queue_end_tag() to warn when the tag is truly invalid
(greater than real_max_depth).  However, it changed behavior in the tag <
max_depth case to not end the request.  Leading to triggering of
BUG_ON(blk_queued_rq(rq)) in the request completion path:

  http://marc.info/?l=linux-kernel&m=132204370518629&w=2

In order to allow blk_queue_resize_tags() to shrink the tag space
blk_queue_end_tag() must always complete tags with a value less than
real_max_depth regardless of the current max_depth.  The comment about
"handling the shrink case" seems to be what prompted changes in this
space, so remove it and BUG on all invalid tags (made even simpler by
Matthew's suggestion to use an unsigned compare).

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Cc: Tao Ma <boyu.mt@taobao.com>
Cc: Matthew Wilcox <matthew@wil.cx>
Reported-by: Meelis Roos <mroos@ut.ee>
Reported-by: Ed Nadolski <edmund.nadolski@intel.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

8 years agoARM: EXYNOS: Remove duplicated SROMC static memory mapping
Thomas Abraham [Wed, 28 Dec 2011 06:07:32 +0000]
ARM: EXYNOS: Remove duplicated SROMC static memory mapping

SROMC static memory mapping is included in the common s5p initialization
code. Hence, remove the duplicated SROMC static memory mapping for EXYNOS.

Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org>
Cc: stable@kernel.org
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

8 years agoARM: SAMSUNG: Fix build error when selecting CPU_FREQ_S3C24XX_DEBUGFS on S3C2440
Denis Kuzmenko [Wed, 28 Dec 2011 05:04:51 +0000]
ARM: SAMSUNG: Fix build error when selecting CPU_FREQ_S3C24XX_DEBUGFS on S3C2440

Following is happened when CONFIG_CPU_FREQ_S3C24XX_DEBUGFS
is selected without building of s3c2410-iotiming.c file:

arch/arm/mach-s3c2440/built-in.o:(.data+0x38c): undefined reference to `s3c2410_iotiming_debugfs

Basically, the CONFIG_S3C2410_IOTIMING is not selected for
MACH_MINI2440. Because the s3c2410-iotiming.c is not ever
compiled and enabling CONFIG_CPU_FREQ_S3C24XX_DEBUGFS option
caused undefined reference to s3c2410_iotiming_debugfs()
defined in that file.  The s3c2410_iotiming_debugfs defined
as NULL for this case.

Signed-off-by: Denis Kuzmenko <linux@solonet.org.ua>
Cc: stable@kernel.org
[kgene.kim@samsung.com: removed useless changes]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

8 years agopacket: fix possible dev refcnt leak when bind fail
Wei Yongjun [Wed, 28 Dec 2011 03:32:41 +0000]
packet: fix possible dev refcnt leak when bind fail

If bind is fail when bind is called after set PACKET_FANOUT
sock option, the dev refcnt will leak.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agowatchdog: iTCO_wdt.c - problems with newer hardware due to SMI clearing (part 2)
Wim Van Sebroeck [Mon, 26 Dec 2011 14:23:51 +0000]
watchdog: iTCO_wdt.c - problems with newer hardware due to SMI clearing (part 2)

Redhat Bugzilla: Bug 727875 - TCO_EN bit is disabled by TCO driver

The previous patch breaks reset watchdog behaviour on the older hardware.
It is therefor better to make sure that the behaviour for older hardware (<=ICH5 or
6300ESB) is preserved and that the behaviour for newer hardware is changed.
We therefor use the iTCO_version to see if we need the clearing of the SMI_TCO_EN
bit in the SMI_EN register.

So the new behaviour becomes:
turn_SMI_watchdog_clear_off=0 -> Do not turn off SMI clearing watchdog.
turn_SMI_watchdog_clear_off=1 -> Turn off SMI clearing watchdog when iTCO_version=1
 (ICHO till ICH5 + 6300ESB only)
turn_SMI_watchdog_clear_off=2 -> Turn off SMI clearing watchdog.

Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

8 years agodrm/i915: Disable RC6 on Sandybridge by default
Keith Packard [Tue, 27 Dec 2011 01:02:11 +0000]
drm/i915: Disable RC6 on Sandybridge by default

RC6 fails again.

> I found my system freeze mostly during starting up X and KDE. Sometimes it
> works for some minutes, sometimes it freezes immediatly. When the freeze
> happens, everything is dead (even the reset button does not work, I need to
> power cycle).

> I disabled RC6, and my system runs wonderfully.

> The system is a Z68 Pro board with Sandybridge i5-2500K processor, 8
> GB of RAM and UEFI firmware.

Reported-by: Kai Krakow <hurikhan77@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agodrm/i915: Disable semaphores by default on SNB
Keith Packard [Tue, 27 Dec 2011 01:02:10 +0000]
drm/i915: Disable semaphores by default on SNB

Semaphores still cause problems on some machines:

> From Udo Steinberg:
>
> With Linux-3.2-rc6 I'm frequently seeing GPU hangs when large amounts of
> text scroll in an xterm, such as when extracting a tar archive. Such as this
> one (note the timestamps):
>
>  I can reproduce it fairly easily with something
>  as simple as:
>
>   while true; do dmesg; done

This patch turns them off on SNB while leaving them on for IVB.

Reported-by: Udo Steinberg <udo@hypervisor.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Eugeni Dodonov <eugeni@dodonov.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoMerge branch 'kvm-updates/3.2' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Linus Torvalds [Mon, 26 Dec 2011 21:17:00 +0000]
Merge branch 'kvm-updates/3.2' of git://git./virt/kvm/kvm

* 'kvm-updates/3.2' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: PPC: e500: include linux/export.h
  KVM: PPC: fix kvmppc_start_thread() for CONFIG_SMP=N
  KVM: PPC: protect use of kvmppc_h_pr
  KVM: PPC: move compute_tlbie_rb to book3s_64 common header
  KVM: Don't automatically expose the TSC deadline timer in cpuid
  KVM: Device assignment permission checks
  KVM: Remove ability to assign a device without iommu support
  KVM: x86: Prevent starting PIT timers in the absence of irqchip support

8 years agoMerge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Linus Torvalds [Mon, 26 Dec 2011 20:46:17 +0000]
Merge tag 'for-linus' of git://git./linux/kernel/git/ieee1394/linux1394

post 3.2-rc7 pull request

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
  MAINTAINERS: firewire git URL update

8 years agovfs: fix handling of lock allocation failure in lease-break case
Linus Torvalds [Mon, 26 Dec 2011 18:25:26 +0000]
vfs: fix handling of lock allocation failure in lease-break case

Bruce Fields notes that commit 778fc546f749 ("locks: fix tracking of
inprogress lease breaks") introduced a possible error pointer
dereference on failure to allocate memory.  locks_conflict() will
dereference the passed-in new lease lock structure that may be an error pointer.

This means an open (without O_NONBLOCK set) on a file with a lease
applied (generally only done when Samba or nfsd (with v4) is running)
could crash if a kmalloc() fails.

So instead of playing games with IS_ERROR() all over the place, just
check the allocation failure early.  That makes the code more
straightforward, and avoids this possible bad pointer dereference.

Based-on-patch-by: J. Bruce Fields <bfields@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agowatchdog: hpwdt: Changes to handle NX secure bit in 32bit path
Mingarelli, Thomas [Mon, 7 Nov 2011 09:59:00 +0000]
watchdog: hpwdt: Changes to handle NX secure bit in 32bit path

This patch makes use of the set_memory_x() kernel API in order
to make necessary BIOS calls to source NMIs.

This is needed for SLES11 SP2 and the latest upstream kernel as it appears
the NX Execute Disable has grown in its control.

Signed-off by: Thomas Mingarelli <thomas.mingarelli@hp.com>
Signed-off by: Wim Van Sebroeck <wim@iguana.be>
Cc: stable@kernel.org

8 years agowatchdog: sp805: Fix section mismatch in ID table.
Nick Bowler [Mon, 19 Dec 2011 16:22:36 +0000]
watchdog: sp805: Fix section mismatch in ID table.

The AMBA ID table is marked as __initdata, yet it is referenced by the
driver struct which is not.  This causes a (somewhat unhelpful) section
mismatch warning:

  WARNING: drivers/watchdog/sp805_wdt.o(.data+0x4c): Section mismatch in
           reference from the variable sp805_wdt_driver to the (unknown
           reference) .init.data:(unknown)

Fix this by removing the annotation.

Signed-off-by: Nick Bowler <nbowler@elliptictech.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

8 years agowatchdog: move coh901327 state holders
Linus Walleij [Mon, 3 Oct 2011 08:52:58 +0000]
watchdog: move coh901327 state holders

The state holders used in the PM path of the drivers report as
unused variables when compiling without CONFIG_PM so let's
move them inside CONFIG_PM.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

8 years agoKVM: PPC: e500: include linux/export.h
Scott Wood [Tue, 20 Dec 2011 14:43:45 +0000]
KVM: PPC: e500: include linux/export.h

This is required for THIS_MODULE.  We recently stopped acquiring
it via some other header.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>