9 years agoflat: fix unmap len in load error path
Mike Frysinger [Fri, 4 Jun 2010 21:14:55 +0000]
flat: fix unmap len in load error path

The data chunk is mmaped with 'len' which remains unchanged, so use that
when unmapping in the error path rather than trying to recalculate (and
incorrectly so) the value used originally.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: David McCullough <davidm@snapgear.com>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agofs/binfmt_flat.c: split the stack & data alignments
Mike Frysinger [Fri, 4 Jun 2010 21:14:53 +0000]
fs/binfmt_flat.c: split the stack & data alignments

The stack and data have different alignment requirements, so don't force
them to wear the same shoe.  Increase the data alignment to match that
which the elf2flt linker script has always been using: 0x20 bytes.  Not
only does this bring the kernel loader in line with the toolchain, but it
also fixes a swath of gcc tests which try to force larger alignment values
but randomly fail when the FLAT loader fails to deliver.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: David Woodhouse <David.Woodhouse@intel.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: David McCullough <davidm@snapgear.com>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Tested-by: Michal Simek <monstr@monstr.eu>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Jie Zhang <jie@codesourcery.com>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agovmware balloon: clamp number of collected non-balloonable pages
Dmitry Torokhov [Fri, 4 Jun 2010 21:14:52 +0000]
vmware balloon: clamp number of collected non-balloonable pages

Limit number of accumulated non-balloonable pages during inflation cycle,
otherwise there is a chance we will be spinning and growing the list
forever.  This happens during torture tests when balloon target changes
while we are in the middle of inflation cycle and monitor starts refusing
to lock pages (since they are not needed anymore).

Signed-off-by: Dmitry Torokhov <dtor@vmware.com>
Acked-by: Bhavesh Davda <bhavesh@vmware.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoxtensa: invoke oom-killer from page fault
Nick Piggin [Fri, 4 Jun 2010 21:14:51 +0000]
xtensa: invoke oom-killer from page fault

As explained in commit 1c0fe6e3bd ("mm: invoke oom-killer from page
fault") , we want to call the architecture independent oom killer when
getting an unexplained OOM from handle_mm_fault, rather than simply
killing current.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Chris Zankel <chris@zankel.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agomn10300: invoke oom-killer from page fault
Nick Piggin [Fri, 4 Jun 2010 21:14:51 +0000]
mn10300: invoke oom-killer from page fault

As explained in commit 1c0fe6e3bd ("mm: invoke oom-killer from page
fault") , we want to call the architecture independent oom killer when
getting an unexplained OOM from handle_mm_fault, rather than simply
killing current.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agom32r: invoke oom-killer from page fault
Nick Piggin [Fri, 4 Jun 2010 21:14:49 +0000]
m32r: invoke oom-killer from page fault

As explained in commit 1c0fe6e3bd ("mm: invoke oom-killer from page
fault") , we want to call the architecture independent oom killer when
getting an unexplained OOM from handle_mm_fault, rather than simply
killing current.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agofrv: invoke oom-killer from page fault
Nick Piggin [Fri, 4 Jun 2010 21:14:49 +0000]
frv: invoke oom-killer from page fault

As explained in commit 1c0fe6e3bd ("mm: invoke oom-killer from page
fault") , we want to call the architecture independent oom killer when
getting an unexplained OOM from handle_mm_fault, rather than simply
killing current.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Acked-by: David Howells <dhowells@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoramoops: add HAS_IOMEM dependency
Heiko Carstens [Fri, 4 Jun 2010 21:14:48 +0000]
ramoops: add HAS_IOMEM dependency

The driver fails to compile on s390:

drivers/char/ramoops.c: In function 'ramoops_init':
drivers/char/ramoops.c:122: error: implicit declaration of function 'ioremap'

Since we won't make use of the driver anyway on s390 just let it depend on
HAS_IOMEM.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Marco Stornelli <marco.stornelli@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agofs/compat_rw_copy_check_uvector: add missing compat_ptr call
Heiko Carstens [Fri, 4 Jun 2010 21:14:47 +0000]
fs/compat_rw_copy_check_uvector: add missing compat_ptr call

A call to access_ok is missing a compat_ptr conversion.  Introduced with
b83733639a494d5f42fa00a2506563fbd2d3015d "compat: factor out
compat_rw_copy_check_uvector from compat_do_readv_writev"

fs/compat.c: In function 'compat_rw_copy_check_uvector':
fs/compat.c:629: warning: passing argument 1 of '__access_ok' makes pointer from integer without a cast

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agortc: s3c: initialize s3c_rtc_cpu_type before using it
Maurus Cuelenaere [Fri, 4 Jun 2010 21:14:46 +0000]
rtc: s3c: initialize s3c_rtc_cpu_type before using it

Make sure s3c_rtc_cpu_type is initialised _before_ it's used in an if()
check.

Reported-by: Jiri Pinkava <jiri.pinkava@vscht.cz>
Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com>
Cc: Paul Gortmaker <p_gortmaker@yahoo.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Maurus Cuelenaere <mcuelenaere@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agortc: s3c: initialize driver data before using it
Maurus Cuelenaere [Fri, 4 Jun 2010 21:14:44 +0000]
rtc: s3c: initialize driver data before using it

s3c_rtc_setfreq() uses the platform driver data to derive struct rtc_device,
so make sure drvdata is set _before_ s3c_rtc_setfreq() is called.

Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com>
Cc: Paul Gortmaker <p_gortmaker@yahoo.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Maurus Cuelenaere <mcuelenaere@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoMerge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux...
Linus Torvalds [Fri, 4 Jun 2010 20:04:39 +0000]
Merge branch 'release' of git://git./linux/kernel/git/lenb/linux-acpi-2.6

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  ACPI: Eliminate us to pm ticks conversion in common path
  ACPI: Fix the incorrect calculation about C-state idle time
  ACPI: update feature-removal.txt to reflect deleted acpi=ht option
  ACPI / EC / PM: Fix names of functions that block/unblock EC transactions
  ACPI / EC / PM: Fix race between EC transactions and system suspend

9 years agoMerge branch 'acpi-idle' into release
Len Brown [Fri, 4 Jun 2010 19:23:02 +0000]
Merge branch 'acpi-idle' into release

9 years agoMerge branch 'sfi-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb...
Linus Torvalds [Fri, 4 Jun 2010 19:22:43 +0000]
Merge branch 'sfi-release' of git://git./linux/kernel/git/lenb/linux-sfi-2.6

* 'sfi-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-sfi-2.6:
  SFI: do not return freed pointer

9 years agoACPI: Eliminate us to pm ticks conversion in common path
Venkatesh Pallipadi [Wed, 2 Jun 2010 17:01:09 +0000]
ACPI: Eliminate us to pm ticks conversion in common path

acpi_enter_[simple|bm] routines does us to pm tick conversion on every
idle wakeup and the value is only used in /proc/acpi display. We can
store the time in us and convert it into pm ticks before printing instead and
avoid the conversion in the common path.

Signed-off-by: Venkatesh Pallipadi <venki@google.com>
Signed-off-by: Len Brown <len.brown@intel.com>

9 years agoACPI: Fix the incorrect calculation about C-state idle time
Zhao Yakui [Wed, 2 Jun 2010 03:04:09 +0000]
ACPI: Fix the incorrect calculation about C-state idle time

The C-state idle time is not calculated correctly, which will return the wrong
residency time in C-state. It will have the following effects:
   1.  The system can't choose the deeper C-state when it is idle next time.
Of course the system power is increased. E.g. On one server machine about 40W
idle power is increased.
   2.  The powertop shows that it will stay in C0 running state about 95% time
although the system is idle at most time.

2.6.35-rc1 regression caused-by: 2da513f582a96c053aacc2c92873978d2ea7abff
(ACPI: Minor cleanup eliminating redundant PMTIMER_TICKS to NS conversion)

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reported-by: Yu Zhidong <zhidong.yu@intel.com>
Tested-by: Yu Zhidong <zhidong.yu@intel.com>
Acked-by: Venkatesh Pallipadi <venki@google.com>
Signed-off-by: Len Brown <len.brown@intel.com>

9 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
Linus Torvalds [Fri, 4 Jun 2010 16:48:03 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: hda-intel - fix wallclk variable update and condition
  ALSA: asihpi - Fix uninitialized variable
  ALSA: hda: Use LPIB for ASUS M2V
  usb/gadget: Replace the old USB audio FU definitions in f_audio.c
  ASoC: MX31ads sound support should depend on MACH_MX31ADS_WM1133_EV1
  ASoC: Add missing Kconfig entry for Phytec boards
  ALSA: usb-audio: export UAC2 clock selectors as mixer controls
  ALSA: usb-audio: clean up find_audio_control_unit()
  ALSA: usb-audio: add UAC2 sepecific Feature Unit controls
  ALSA: usb-audio: unify constants from specification
  ALSA: usb-audio: parse clock topology of UAC2 devices
  ALSA: usb-audio: fix selector unit string index accessor
  include/linux/usb/audio-v2.h: add more UAC2 details
  ALSA: usb-audio: support partially write-protected UAC2 controls
  ALSA: usb-audio: UAC2: clean up parsing of bmaControls
  ALSA: hda: Use LPIB for another mainboard
  ALSA: hda: Use mb31 quirk for an iMac model
  ALSA: hda: Use LPIB for an ASUS device

9 years agoMerge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzi...
Linus Torvalds [Thu, 3 Jun 2010 22:48:15 +0000]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/jgarzik/libata-dev

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  libata: implement on-demand HPA unlocking
  libata: use the enlarged capacity after late HPA unlock
  SCSI: implement sd_unlock_native_capacity()
  libata-sff: trivial corrections to Kconfig help text
  sata_nv: don't diddle with nIEN on mcp55
  sata_via: magic vt6421 fix for transmission problems w/ WD drives

9 years agoMerge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Thu, 3 Jun 2010 22:47:51 +0000]
Merge branch 'sched-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched, trace: Fix sched_switch() prev_state argument
  sched: Fix wake_affine() vs RT tasks
  sched: Make sure timers have migrated before killing the migration_thread

9 years agoMerge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Thu, 3 Jun 2010 22:47:22 +0000]
Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, smpboot: Fix cores per node printing on boot
  x86/amd-iommu: Fall back to GART if initialization fails
  x86/amd-iommu: Fix crash when request_mem_region fails
  x86/mm: Remove unused DBG() macro
  arch/x86/kernel: Add missing spin_unlock

9 years agoMerge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Linus Torvalds [Thu, 3 Jun 2010 22:46:37 +0000]
Merge branch 'merge' of git://git./linux/kernel/git/benh/powerpc

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc/macio: Fix probing of macio devices by using the right of match table
  agp/uninorth: Fix oops caused by flushing too much
  powerpc/pasemi: Update MAINTAINERS file
  powerpc/cell: Fix integer constant warning
  powerpc/kprobes: Remove resume_execution() in kprobes
  powerpc/macio: Don't dereference pointer before null check

9 years agoMerge branch 'for-linus/bugfixes' of git://xenbits.xensource.com/people/ianc/linux-2.6
Linus Torvalds [Thu, 3 Jun 2010 22:46:09 +0000]
Merge branch 'for-linus/bugfixes' of git://xenbits.xensource.com/people/ianc/linux-2.6

* 'for-linus/bugfixes' of git://xenbits.xensource.com/people/ianc/linux-2.6:
  xen: avoid allocation causing potential swap activity on the resume path
  xen: ensure timer tick is resumed even on CPU driving the resume

9 years agoMerge branch 'perf-fixes-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Thu, 3 Jun 2010 22:45:26 +0000]
Merge branch 'perf-fixes-for-linus-2' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf: Fix crash in swevents
  perf buildid-list: Fix --with-hits event processing
  perf scripts python: Give field dict to unhandled callback
  perf hist: fix objdump output parsing
  perf-record: Check correct pid when forking
  perf: Do the comm inheritance per thread in event__process_task
  perf: Use event__process_task from perf sched
  perf: Process comm events by tid
  blktrace: Fix new kernel-doc warnings
  perf_events: Fix unincremented buffer base on partial copy
  perf_events: Fix event scheduling issues introduced by transactional API
  perf_events, trace: Fix perf_trace_destroy(), mutex went missing
  perf_events, trace: Fix probe unregister race
  perf_events: Fix races in group composition
  perf_events: Fix races and clean up perf_event and perf_mmap_data interaction

9 years agoMerge branch 'virtio' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux...
Linus Torvalds [Thu, 3 Jun 2010 22:45:03 +0000]
Merge branch 'virtio' of git://git./linux/kernel/git/rusty/linux-2.6-for-linus

* 'virtio' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  virtio: console: Fix crash when port is unplugged and blocked for write
  virtio: console: Fix crash when hot-unplugging a port and read is blocked
  virtio-blk: fix minimum number of S/G elements

9 years agoMerge branch 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvar...
Linus Torvalds [Thu, 3 Jun 2010 22:44:43 +0000]
Merge branch 'i2c-for-linus' of git://git./linux/kernel/git/jdelvare/staging

* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  i2c: Remove all i2c_set_clientdata(client, NULL) in drivers
  i2c/busses: Move two drivers to embedded section
  i2c: Rename i2c_check_addr to i2c_check_addr_busy
  i2c: Document reserved I2C addresses
  i2c: Check for address validity on client registration
  i2c: Share the I2C device presence detection code
  Documentation/i2c: Checkpatch cleanup

9 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Linus Torvalds [Thu, 3 Jun 2010 22:42:21 +0000]
Merge git://git./linux/kernel/git/herbert/crypto-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: crypto4xx - Fix build breakage
  n2_crypto: Plumb fallback ahash requests properly.
  n2_crypto: Fix MAU kmem_cache name.
  n2_crypto: Fix build after of_device/of_platform_driver changes.

9 years agoperf: Fix crash in swevents
Peter Zijlstra [Thu, 3 Jun 2010 09:21:20 +0000]
perf: Fix crash in swevents

Frederic reported that because swevents handling doesn't disable IRQs
anymore, we can get a recursion of perf_adjust_period(), once from
overflow handling and once from the tick.

If both call ->disable, we get a double hlist_del_rcu() and trigger
a LIST_POISON2 dereference.

Since we don't actually need to stop/start a swevent to re-programm
the hardware (lack of hardware to program), simply nop out these
callbacks for the swevent pmu.

Reported-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1275557609.27810.35218.camel@twins>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

9 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6
Linus Torvalds [Thu, 3 Jun 2010 14:20:28 +0000]
Merge git://git./linux/kernel/git/sfrench/cifs-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  cifs: fix page refcount leak

9 years agoMerge branch 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied...
Linus Torvalds [Thu, 3 Jun 2010 14:19:45 +0000]
Merge branch 'drm-linus' of git://git./linux/kernel/git/airlied/drm-2.6

* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (41 commits)
  drm/radeon/kms: make sure display hw is disabled when suspending
  drm/vmwgfx: Allow userspace to change default layout. Bump minor.
  drm/vmwgfx: Fix framebuffer modesetting
  drm/vmwgfx: Fix vga save / restore with display topology.
  vgaarb: use MIT license
  vgaarb: convert pr_devel() to pr_debug()
  drm: fix typos in Linux DRM Developer's Guide
  drm/radeon/kms/pm: voltage fixes
  drm/radeon/kms/pm: radeon_set_power_state fixes
  drm/radeon/kms/pm: patch default power state with default clocks/voltages on r6xx+
  drm/radeon/kms/pm: enable SetVoltage on r7xx/evergreen
  drm/radeon/kms/pm: add support for SetVoltage cmd table (V2)
  drm/radeon/kms/evergreen: add initial CS parser
  drm/kms: disable/enable poll around switcheroo on/off
  drm/nouveau: fixup confusion over which handle the DSM is hanging off.
  drm/nouveau: attempt to get bios from ACPI v3
  drm/nv50: cast IGP memory location to u64 before shifting
  drm/ttm: Fix ttm_page_alloc.c
  drm/ttm: Fix cached TTM page allocation.
  drm/vmwgfx: Remove some leftover debug messages.
  ...

9 years agoMerge branch 'merge' of git://git.secretlab.ca/git/linux-2.6
Linus Torvalds [Thu, 3 Jun 2010 14:17:31 +0000]
Merge branch 'merge' of git://git.secretlab.ca/git/linux-2.6

* 'merge' of git://git.secretlab.ca/git/linux-2.6:
  of/powerpc: fix fsl_msi device node pointer
  of/watchdog: gef_wdt.c: fix build breakage
  of/edac: fix build breakage in drivers
  of/net: fs_enet/mii-bitbang.c: fix build breakage
  of/usb: fsl_qe_udc.c: fix build breakage
  of/crypto: crypto4xx_core.c: fix build breakage
  of/dma: fix build breakage in ppc4xx adma driver
  of/mtd: nand: fix build breakage in drivers
  of/video: fix build breakage in FB drivers
  of/pcmcia: m8xx_pcmcia.c: Fix build failures
  of/rtc: rtc-mpc5121.c: Fix build failures
  of/dma: mpc512x_dma.c: Fix build failures
  of/mtd/nand: mpc5121_nfc.c: Fix build failures
  of/spi: mpc512x_psc_spi.c: Fix build failures
  watchdog: Fix build failure with OF changes
  of/spi: Fix build failure on spi_ppc4xx.c
  of/usb: fix build error due to of_node pointer move
  of/powerpc: fix 85xx RapidIO device node pointer

9 years agovirtio: console: Fix crash when port is unplugged and blocked for write
Amit Shah [Thu, 27 May 2010 07:54:40 +0000]
virtio: console: Fix crash when port is unplugged and blocked for write

When a program that has a virtio port opened and blocked for a write
operation, a port hot-unplug event will later led to a crash when
SIGTERM was sent to the program. Fix that.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

9 years agovirtio: console: Fix crash when hot-unplugging a port and read is blocked
Amit Shah [Thu, 27 May 2010 07:54:39 +0000]
virtio: console: Fix crash when hot-unplugging a port and read is blocked

When removing a port we don't check if a program was blocked for read.
This leads to a crash when SIGTERM is sent to the program after
hot-unplugging the port.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

9 years agovirtio-blk: fix minimum number of S/G elements
Christoph Hellwig [Tue, 25 May 2010 12:17:54 +0000]
virtio-blk: fix minimum number of S/G elements

We need at least one S/G element to operate properly, as does the block
layer which increments it to one anyway.  We hit this due to a qemu
bug which advertises a sg_elements of 0 under some circumstances.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (tweaked logic)

9 years agoi2c: Remove all i2c_set_clientdata(client, NULL) in drivers
Wolfram Sang [Thu, 3 Jun 2010 09:33:58 +0000]
i2c: Remove all i2c_set_clientdata(client, NULL) in drivers

I2C drivers can use the clientdata-pointer to point to private data. As I2C
devices are not really unregistered, but merely detached from their driver, it
used to be the drivers obligation to clear this pointer during remove() or a
failed probe(). As a couple of drivers forgot to do this, it was agreed that it
was cleaner if the i2c-core does this clearance when appropriate, as there is
no guarantee for the lifetime of the clientdata-pointer after remove() anyhow.
This feature was added to the core with commit
e4a7b9b04de15f6b63da5ccdd373ffa3057a3681 to fix the faulty drivers.

As there is no need anymore to clear the clientdata-pointer, remove all current
occurrences in the drivers to simplify the code and prevent confusion.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Acked-by: Richard Purdie <rpurdie@linux.intel.com>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

9 years agoi2c/busses: Move two drivers to embedded section
Wolfram Sang [Thu, 3 Jun 2010 09:33:56 +0000]
i2c/busses: Move two drivers to embedded section

And fix a typo while we are here

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

9 years agoi2c: Rename i2c_check_addr to i2c_check_addr_busy
Jean Delvare [Thu, 3 Jun 2010 09:33:55 +0000]
i2c: Rename i2c_check_addr to i2c_check_addr_busy

Otherwise it's not clear what it is checking.

Also move the function to save a forward declaration.

Signed-off-by: Jean Delvare <khali@linux-fr.org>

9 years agoi2c: Document reserved I2C addresses
Jean Delvare [Thu, 3 Jun 2010 09:33:53 +0000]
i2c: Document reserved I2C addresses

Move strict I2C address validity check to a single function, and
document the reserved I2C addresses there.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Hans Verkuil <hverkuil@xs4all.nl>

9 years agoi2c: Check for address validity on client registration
Jean Delvare [Thu, 3 Jun 2010 09:33:52 +0000]
i2c: Check for address validity on client registration

Do basic address validity checks when a client is being registered. We
already had checks in place for devices which are being detected, but
not for devices which are simply instantiated.

This is a very basic check. We don't want to do strict checking here
because some devices are known to infringe the I2C address constraints
(e.g. IR receivers at 7-bit address 0x7a while this value is
supposedly reserved for 10-bit addresses.) So we assume the caller
knows what it is doing.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Matthieu Castet <castet.matthieu@free.fr>

9 years agoi2c: Share the I2C device presence detection code
Jean Delvare [Thu, 3 Jun 2010 09:33:51 +0000]
i2c: Share the I2C device presence detection code

Use the same I2C device presence detection code for legacy and new
device detection functions. This is more consistent and makes the code
smaller.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Matthieu Castet <castet.matthieu@free.fr>

9 years agoDocumentation/i2c: Checkpatch cleanup
Andrea Gelmini [Thu, 3 Jun 2010 09:33:50 +0000]
Documentation/i2c: Checkpatch cleanup

Remove all trailing whitespace in Documentation/i2c.

Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

9 years agoxen: avoid allocation causing potential swap activity on the resume path
Ian Campbell [Tue, 25 May 2010 09:45:35 +0000]
xen: avoid allocation causing potential swap activity on the resume path

Since the device we are resuming could be the device containing the
swap device we should ensure that the allocation cannot cause
IO.

On resume, this path is triggered when the running system tries to
continue using its devices.  If it cannot then the resume will fail;
to try to avoid this we let it dip into the emergency pools.

The majority of these changes were made when linux-2.6.18-xen.hg
changeset e8b49cfbdac0 was ported upstream in
a144ff09bc52ef3f3684ed23eadc9c7c0e57b3aa but somehow this hunk was
dropped.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Stable Kernel <stable@kernel.org> # .32.x

9 years agoxen: ensure timer tick is resumed even on CPU driving the resume
Ian Campbell [Wed, 19 May 2010 15:19:25 +0000]
xen: ensure timer tick is resumed even on CPU driving the resume

The core suspend/resume code is run from stop_machine on CPU0 but
parts of the suspend/resume machinery (including xen_arch_resume) are
run on whichever CPU happened to schedule the xenwatch kernel thread.

As part of the non-core resume code xen_arch_resume is called in order
to restart the timer tick on non-boot processors. The boot processor
itself is taken care of by core timekeeping code.

xen_arch_resume uses smp_call_function which does not call the given
function on the current processor. This means that we can end up with
one CPU not receiving timer ticks if the xenwatch thread happened to
be scheduled on CPU > 0.

Use on_each_cpu instead of smp_call_function to ensure the timer tick
is resumed everywhere.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Stable Kernel <stable@kernel.org> # .32.x

9 years agocrypto: crypto4xx - Fix build breakage
Anatolij Gustschin [Thu, 3 Jun 2010 06:53:49 +0000]
crypto: crypto4xx - Fix build breakage

Fixes build error caused by the OF device_node
pointer being moved into struct device

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

9 years agoof/powerpc: fix fsl_msi device node pointer
Wolfram Sang [Thu, 3 Jun 2010 04:03:46 +0000]
of/powerpc: fix fsl_msi device node pointer

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

9 years agodrm/radeon/kms: make sure display hw is disabled when suspending
Alex Deucher [Wed, 2 Jun 2010 16:08:41 +0000]
drm/radeon/kms: make sure display hw is disabled when suspending

Disable the display hw when suspending.
Should fix bug:
https://bugzilla.redhat.com/show_bug.cgi?id=522393

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/vmwgfx: Allow userspace to change default layout. Bump minor.
Jakob Bornecrantz [Tue, 1 Jun 2010 09:54:20 +0000]
drm/vmwgfx: Allow userspace to change default layout. Bump minor.

The host may change the layout and, since the change is
communicated to the master, the master needs a way to
communicate the change to the kernel driver.

The minor version number is bumped to advertize the
availability of this feature.

Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/vmwgfx: Fix framebuffer modesetting
Jakob Bornecrantz [Tue, 1 Jun 2010 09:38:16 +0000]
drm/vmwgfx: Fix framebuffer modesetting

Must set SVGA_NUM_REG_GUEST_DISPLAY before setting up the display information.

Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/vmwgfx: Fix vga save / restore with display topology.
Thomas Hellstrom [Tue, 1 Jun 2010 09:38:17 +0000]
drm/vmwgfx: Fix vga save / restore with display topology.

vga save / restore previously didn't handle the display topology case.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agovgaarb: use MIT license
Tiago Vignatti [Mon, 24 May 2010 15:24:31 +0000]
vgaarb: use MIT license

Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Cc: Henry Zhao <Henry.Zhao@Sun.COM>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agovgaarb: convert pr_devel() to pr_debug()
Tiago Vignatti [Mon, 24 May 2010 15:24:30 +0000]
vgaarb: convert pr_devel() to pr_debug()

We want to be able to use CONFIG_DYNAMIC_DEBUG in arbiter code, switch
the few existing pr_devel() calls to pr_debug().

Also, add one more debug information regarding decoding count.

Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm: fix typos in Linux DRM Developer's Guide
Nicolas Kaiser [Fri, 28 May 2010 05:33:49 +0000]
drm: fix typos in Linux DRM Developer's Guide

A few typos in the DRM Developer's Guide.

Signed-off-by: Nicolas Kaiser <nikai@nikai.net>
Acked-by: Jesse Barnes <jesse.barnes@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms/pm: voltage fixes
Alex Deucher [Thu, 27 May 2010 21:01:42 +0000]
drm/radeon/kms/pm: voltage fixes

- Enable GPIO voltage for non pm modes as well so resetting
the default voltage works.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms/pm: radeon_set_power_state fixes
Alex Deucher [Thu, 27 May 2010 21:01:41 +0000]
drm/radeon/kms/pm: radeon_set_power_state fixes

- wait for vbl for both profile and dynpm
- unify profile and dynpm code paths more
- call pm_misc before of after clocks to make
sure voltage is changed in the proper order.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms/pm: patch default power state with default clocks/voltages on r6xx+
Alex Deucher [Thu, 27 May 2010 21:01:40 +0000]
drm/radeon/kms/pm: patch default power state with default clocks/voltages on r6xx+

The default power state does not always match the default clocks and voltage
for a particular card.  The information in the firmware info table is correct
and should be used in preference to the info the default power state.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms/pm: enable SetVoltage on r7xx/evergreen
Alex Deucher [Fri, 28 May 2010 23:35:01 +0000]
drm/radeon/kms/pm: enable SetVoltage on r7xx/evergreen

I missed these in the r6xx commit.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms/pm: add support for SetVoltage cmd table (V2)
Alex Deucher [Thu, 27 May 2010 23:25:54 +0000]
drm/radeon/kms/pm: add support for SetVoltage cmd table (V2)

- This enables voltage adjustment on r6xx+ and certain
r5xx asics.
- Voltage drop support is already available for most
r1xx-r5xx asics.

V2: endian fix for voltage table.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agoof/watchdog: gef_wdt.c: fix build breakage
Anatolij Gustschin [Thu, 3 Jun 2010 01:30:31 +0000]
of/watchdog: gef_wdt.c: fix build breakage

Fixes build error caused by the OF device_node
pointer being moved into struct device

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

9 years agoof/edac: fix build breakage in drivers
Anatolij Gustschin [Thu, 3 Jun 2010 01:17:42 +0000]
of/edac: fix build breakage in drivers

Fixes build errors in EDAC drivers caused by the OF
device_node pointer being moved into struct device

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

9 years agoof/net: fs_enet/mii-bitbang.c: fix build breakage
Anatolij Gustschin [Thu, 3 Jun 2010 01:06:54 +0000]
of/net: fs_enet/mii-bitbang.c: fix build breakage

Fixes build error caused by the OF device_node
pointer being moved into struct device

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

9 years agoof/usb: fsl_qe_udc.c: fix build breakage
Anatolij Gustschin [Thu, 3 Jun 2010 00:59:55 +0000]
of/usb: fsl_qe_udc.c: fix build breakage

Fixes build error caused by the OF device_node
pointer being moved into struct device

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

9 years agoof/crypto: crypto4xx_core.c: fix build breakage
Anatolij Gustschin [Thu, 3 Jun 2010 00:53:18 +0000]
of/crypto: crypto4xx_core.c: fix build breakage

Fixes build error caused by the OF device_node
pointer being moved into struct device

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

9 years agoof/dma: fix build breakage in ppc4xx adma driver
Anatolij Gustschin [Thu, 3 Jun 2010 00:46:37 +0000]
of/dma: fix build breakage in ppc4xx adma driver

Fixes build error caused by the OF device_node
pointer being moved into struct device

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

9 years agoof/mtd: nand: fix build breakage in drivers
Anatolij Gustschin [Thu, 3 Jun 2010 00:37:17 +0000]
of/mtd: nand: fix build breakage in drivers

Fixes build errors in drivers caused by the OF device_node
pointer being moved into struct device

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

9 years agoof/video: fix build breakage in FB drivers
Anatolij Gustschin [Thu, 3 Jun 2010 00:20:44 +0000]
of/video: fix build breakage in FB drivers

Fixes build errors in a number of framebuffer drivers caused
by the OF device_node pointer being moved into struct device

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

9 years agoof/pcmcia: m8xx_pcmcia.c: Fix build failures
Anatolij Gustschin [Wed, 2 Jun 2010 23:38:57 +0000]
of/pcmcia: m8xx_pcmcia.c: Fix build failures

Fixes build errors caused by the:
- OF device_node pointer being moved into struct device
- typo in match_table field in the struct device_driver
  (which shoud be of_match_table)

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

9 years agoFix colors for Mach64
Mikulas Patocka [Wed, 2 Jun 2010 15:09:04 +0000]
Fix colors for Mach64

Use the same color-calculating algorithm as in atyfb_imageblit in this
driver or in generic cfb_fillrect.

This patch fixes bad colors when using an accelerator in 15-bit and
16-bit modes.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoof/rtc: rtc-mpc5121.c: Fix build failures
Grant Likely [Wed, 2 Jun 2010 20:06:09 +0000]
of/rtc: rtc-mpc5121.c: Fix build failures

Fixes build errors caused by the:
- OF device_node pointer being moved into struct device
- removal of the match_table field from struct of_platform_driver

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
CC: Paul Gortmaker <p_gortmaker@yahoo.com>
CC: Alessandro Zummo <a.zummo@towertech.it>
CC: Wolfgang Denk <wd@denx.de>
CC: Tejun Heo <tj@kernel.org>
CC: Anatolij Gustschin <agust@denx.de>
CC: rtc-linux@googlegroups.com
CC: devicetree-discuss@lists.ozlabs.org

9 years agoof/dma: mpc512x_dma.c: Fix build failures
Anatolij Gustschin [Mon, 31 May 2010 16:39:13 +0000]
of/dma: mpc512x_dma.c: Fix build failures

Fixes build errors caused by the:
 - OF device_node pointer being moved into struct device
 - removal of the match_table field from struct of_platform_driver

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

9 years agoof/mtd/nand: mpc5121_nfc.c: Fix build failures
Anatolij Gustschin [Mon, 31 May 2010 16:37:15 +0000]
of/mtd/nand: mpc5121_nfc.c: Fix build failures

Fixes build errors caused by the:
 - OF device_node pointer being moved into struct device
 - removal of the match_table field from struct of_platform_driver

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

9 years agoof/spi: mpc512x_psc_spi.c: Fix build failures
Anatolij Gustschin [Mon, 31 May 2010 16:34:54 +0000]
of/spi: mpc512x_psc_spi.c: Fix build failures

Fixes build errors caused by the:
 - OF device_node pointer being moved into struct device
 - removal of the match_table field from struct of_platform_driver

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

9 years agowatchdog: Fix build failure with OF changes
Michael Guntsche [Wed, 2 Jun 2010 08:25:52 +0000]
watchdog: Fix build failure with OF changes

commit 61c7a080a5a061c976988fd4b844dfb468dda255 ( of: Always use
'struct device.of_node' to get device node pointer.) missed
drivers/watchdog/mpc8xxx_wdt.c. This patch fixes it

Signed-off-by: Michael Guntsche <mike@it-loops.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

9 years agoof/spi: Fix build failure on spi_ppc4xx.c
Grant Likely [Wed, 26 May 2010 05:24:02 +0000]
of/spi: Fix build failure on spi_ppc4xx.c

This patch fixes a build error caused by the OF device_node pointer
being moved into struct device.

Fixes bug introduced by commit 61c7a080a5a061c976988fd4b844dfb468dda255
(of: Always use 'struct device.of_node' to get device node pointer)

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
CC: Sean MacLennan <smaclennan@pikatech.com>
CC: spi-devel-general@lists.sourceforge.net
CC: devicetree-discuss@lists.ozlabs.org

9 years agoof/usb: fix build error due to of_node pointer move
Grant Likely [Wed, 2 Jun 2010 19:35:02 +0000]
of/usb: fix build error due to of_node pointer move

Fix driver to use new location of of_node pointer (introduced by commit
use new location of of_node pointer (introduced by commit
61c7a080a5a061c976988fd4b844dfb468dda255; of: Always use 'struct
device.of_node' to get device node pointer)

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Reported-by: John Linn <john.linn@xilinx.com>
CC: Greg Kroah-Hartman <gregkh@suse.de>
CC: Alan Stern <stern@rowland.harvard.edu>
CC: linux-usb@vger.kernel.org
CC: devicetree-discuss@lists.ozlabs.org

9 years agolibata: implement on-demand HPA unlocking
Tejun Heo [Sat, 15 May 2010 18:09:34 +0000]
libata: implement on-demand HPA unlocking

Implement ata_scsi_unlock_native_capacity() which will be called
through SCSI layer when block layer notices that partitions on a
device extend beyond the end of the device.  It requests EH to unlock
HPA, waits for completion and returns the current device capacity.

This allows libata to unlock HPA on demand instead of having to decide
whether to unlock upfront.  Unlocking on demand is safer than
unlocking by upfront because some BIOSes write private data to the
area beyond HPA limit.  This was suggested by Ben Hutchings.

Signed-off-by: Tejun Heo <tj@kernel.org>
Suggested-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

9 years agolibata: use the enlarged capacity after late HPA unlock
Tejun Heo [Sat, 15 May 2010 18:09:33 +0000]
libata: use the enlarged capacity after late HPA unlock

After late HPA unlock, libata kept using the original capacity
ignoring the new larger native capacity.  Enlarging device on the fly
doesn't cause any harm.  Use the larger native capacity instead.  This
will enable on-demand HPA unlocking.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

9 years agoSCSI: implement sd_unlock_native_capacity()
Tejun Heo [Sat, 15 May 2010 18:09:32 +0000]
SCSI: implement sd_unlock_native_capacity()

Implement sd_unlock_native_capacity() method which calls into
hostt->unlock_native_capacity() if implemented.  This will be invoked
by block layer if partitions extend beyond the end of the device and
can be used to implement, for example, on-demand ATA host protected
area unlocking.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

9 years agolibata-sff: trivial corrections to Kconfig help text
Stefan Richter [Sat, 29 May 2010 10:47:45 +0000]
libata-sff: trivial corrections to Kconfig help text

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

9 years agosata_nv: don't diddle with nIEN on mcp55
Tejun Heo [Tue, 1 Jun 2010 15:29:21 +0000]
sata_nv: don't diddle with nIEN on mcp55

On mcp55, nIEN gets stuck once set and liteon blueray rom iHOS104-08
violates ATA specification and fails to set I on D2H Reg FIS if nIEN
is set when the command was issued.  When the other party is following
the spec, both devices can work fine but when the two flaws are put
together, they can't talk to each other.

mcp55 has its own IRQ masking mechanism and there's no reason to mess
with nIEN in the first place.  Fix it by dropping nIEN diddling from
nv_mcp55_freeze/thaw().

This was originally reported by Cengiz.  Although Cengiz hasn't
verified the fix yet, I could reproduce this problem and verfiy the
fix.  Even if Cengiz is experiencing different or additional problems,
this patch is needed.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Cengiz Günay <cgunay@emory.edu>
Cc: stable@kernel.org
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

9 years agosata_via: magic vt6421 fix for transmission problems w/ WD drives
Tejun Heo [Mon, 31 May 2010 14:26:48 +0000]
sata_via: magic vt6421 fix for transmission problems w/ WD drives

vt6421 has problems talking to recent WD drives.  It causes a lot of
transmission errors while high bandwidth transfer as reported in the
following bugzilla entry.

  https://bugzilla.kernel.org/show_bug.cgi?id=15173

Joseph Chan provided the following fix.  I don't have any idea what it
does but I can verify the issue is gone with the patch applied.

Signed-off-by: Tejun Heo <tj@kernel.org>
Originally-from: Joseph Chan <JosephChan@via.com.tw>
Reported-by: Jorrit Tijben <sjorrit@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

9 years agoMerge branch 'fix/asoc' into for-linus
Takashi Iwai [Wed, 2 Jun 2010 12:18:13 +0000]
Merge branch 'fix/asoc' into for-linus

9 years agoMerge branch 'fix/hda' into for-linus
Takashi Iwai [Wed, 2 Jun 2010 12:18:06 +0000]
Merge branch 'fix/hda' into for-linus

9 years agoMerge branch 'for-2.6.35' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie...
Takashi Iwai [Wed, 2 Jun 2010 12:17:44 +0000]
Merge branch 'for-2.6.35' of git://git./linux/kernel/git/broonie/sound-2.6 into fix/asoc

9 years agoMerge branch 'master' of git.alsa-project.org:alsa-kernel into fix/hda
Takashi Iwai [Wed, 2 Jun 2010 12:15:10 +0000]
Merge branch 'master' of git.alsa-project.org:alsa-kernel into fix/hda

9 years agoALSA: hda-intel - fix wallclk variable update and condition
Jaroslav Kysela [Wed, 2 Jun 2010 11:29:17 +0000]
ALSA: hda-intel - fix wallclk variable update and condition

This patch fixes thinko introduced in "last minutes" before commiting
of the last wallclk patch.

It also fixes the condition checking if the first period after last
wallclk update is processed. There is a little rounding error in
period_wallclk.

Signed-off-by: Jaroslav Kysela <perex@perex.cz>

9 years agoMerge branch 'fix/hda' into for-linus
Takashi Iwai [Wed, 2 Jun 2010 10:09:29 +0000]
Merge branch 'fix/hda' into for-linus

9 years agoALSA: asihpi - Fix uninitialized variable
Takashi Iwai [Wed, 2 Jun 2010 10:08:37 +0000]
ALSA: asihpi - Fix uninitialized variable

Initialize prev_ctl properly before reference:
  sound/pci/asihpi/asihpi.c: In function ‘snd_card_asihpi_mixer_new’:
  sound/pci/asihpi/asihpi.c:2568:30: warning: ‘prev_ctl.dst_node_index’ may be used uninitialized in this function

Signed-off-by: Takashi Iwai <tiwai@suse.de>

9 years agopowerpc/macio: Fix probing of macio devices by using the right of match table
Benjamin Herrenschmidt [Wed, 2 Jun 2010 07:09:18 +0000]
powerpc/macio: Fix probing of macio devices by using the right of match table

Grant patches added an of mach table to struct device_driver. However,
while he changed the macio device code to use that, he left the match
table pointer in struct macio_driver and didn't update drivers to use
the "new" one, thus breaking the probing.

This completes the change by moving all drivers to setup the "new"
one, removing all traces of the old one, and while at it (since it
changes the exact same locations), I also remove two other duplicates
from struct driver which are the name and owner fields.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

9 years agoagp/uninorth: Fix oops caused by flushing too much
Paul Mackerras [Tue, 1 Jun 2010 19:33:08 +0000]
agp/uninorth: Fix oops caused by flushing too much

This fixes a sporadic oops at boot on G5 Power Macs.  The table_end
variable has the address of the last byte of the table.  Adding on
PAGE_SIZE means we flush too much, and if the page after the table
is not mapped for any reason, the kernel will oops.  Instead we add
on 1 because flush_dcache_range() interprets its second argument as
the first byte past the range to be flushed.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

9 years agopowerpc/pasemi: Update MAINTAINERS file
Olof Johansson [Sat, 22 May 2010 05:17:38 +0000]
powerpc/pasemi: Update MAINTAINERS file

PWRficient platform work is definitely in maintenance mode these
days, update MAINTAINERS file to reflect reality.

Website is long gone as well.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

9 years agopowerpc/cell: Fix integer constant warning
Denis Kirjanov [Thu, 27 May 2010 04:19:52 +0000]
powerpc/cell: Fix integer constant warning

Fix smatch warning:  warning: constant 0x800000000 is so big it is long

Signed-off-by: Denis Kirjanov <dkirjanov@kernel.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

9 years agopowerpc/kprobes: Remove resume_execution() in kprobes
Ananth N Mavinakayanahalli [Thu, 27 May 2010 19:19:20 +0000]
powerpc/kprobes: Remove resume_execution() in kprobes

emulate_step() in kprobe_handler() would've already determined if the
probed instruction can be emulated. We single-step in hardware only if
the instruction couldn't be emulated. resume_execution() therefore is
superfluous -- all we need is to fix up the instruction pointer after
single-stepping.

Thanks to Paul Mackerras for catching this.

Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

9 years agopowerpc/macio: Don't dereference pointer before null check
Andreas Schwab [Tue, 1 Jun 2010 05:58:40 +0000]
powerpc/macio: Don't dereference pointer before null check

Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

9 years agoof/powerpc: fix 85xx RapidIO device node pointer
Alexandre Bounine [Fri, 28 May 2010 17:56:17 +0000]
of/powerpc: fix 85xx RapidIO device node pointer

Fixes bug introduced by commit 61c7a080a5a061c976988fd4b844dfb468dda255
(of: Always use 'struct device.of_node' to get device node pointer)

Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

9 years agox86, smpboot: Fix cores per node printing on boot
Borislav Petkov [Tue, 1 Jun 2010 19:04:55 +0000]
x86, smpboot: Fix cores per node printing on boot

Percpu initialization happens now after booting the cores on the
machine and this causes them all to be displayed as belonging to
node 0:

Jun  8 05:57:21 kepek kernel: [    0.106999] Booting Node   0,
Processors  #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15 #16 #17 #18 #19 #20 #21 #22 #23 Ok.

Use early_cpu_to_node() to get the correct node of each core
instead.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Cc: Mike Travis <travis@sgi.com>
LKML-Reference: <20100601190455.GA14237@aftab>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

9 years agoMerge branch 'perf/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/acme...
Ingo Molnar [Wed, 2 Jun 2010 07:13:12 +0000]
Merge branch 'perf/urgent' of git://git./linux/kernel/git/acme/linux-2.6 into perf/urgent

9 years agoMerge branches 'bugzilla-14668' and 'misc-2.6.35' into release
Len Brown [Wed, 2 Jun 2010 02:53:36 +0000]
Merge branches 'bugzilla-14668' and 'misc-2.6.35' into release

9 years agoMerge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Linus Torvalds [Tue, 1 Jun 2010 21:13:14 +0000]
Merge branch 'next' of git://git./linux/kernel/git/benh/powerpc

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc: Don't export cvt_fd & _df when CONFIG_PPC_FPU is not set
  powerpc/44x: icon: select SM502 and frame buffer console support
  powerpc/85xx: Add P1021MDS board support
  powerpc/85xx: Change MPC8572DS camp dtses for MSI sharing
  powerpc/fsl_msi: add removal path and probe failing path
  powerpc/fsl_msi: enable msi sharing through AMP OSes
  powerpc/fsl_msi: enable msi allocation in all banks
  powerpc/fsl_msi: fix the conflict of virt_msir's chip_data
  powerpc/fsl_msi: Add multiple MSI bank support
  powerpc/kexec: Add support for FSL-BookE
  powerpc/fsl-booke: Move the entry setup code into a seperate file
  powerpc/fsl-booke: fix the case where we are not in the first page
  powerpc/85xx: Enable support for ports 3 and 4 on 8548 CDS
  powerpc/fsl-booke: Add hibernation support for FSL BookE processors
  powerpc/e500mc: Implement machine check handler.
  powerpc/44x: Add basic ICON PPC440SPe board support
  powerpc/44x: Fix UART clocks on 440SPe
  powerpc/44x: Add reset-type to katmai.dts
  powerpc/44x: Adding PCI-E support for PowerPC 460SX based SOC.

9 years agoMerge branch 'drm-intel-next' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt...
Linus Torvalds [Tue, 1 Jun 2010 21:12:27 +0000]
Merge branch 'drm-intel-next' of git://git./linux/kernel/git/anholt/drm-intel

* 'drm-intel-next' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: (41 commits)
  drm/i915: add HAS_BSD check to i915_getparam
  drm/i915: Honor sync polarity from VBT panel timing descriptors
  drm/i915: Unmask interrupt for render engine on Sandybridge
  drm/i915: Fix PIPE_CONTROL command on Sandybridge
  drm/i915: Fix up address spaces in slow_kernel_write()
  drm/i915: Use non-atomic kmap for slow copy paths
  drm/i915: Avoid moving from CPU domain during pwrite
  drm/i915: Cleanup after failed initialization of ringbuffers
  drm/i915: Reject bind_to_gtt() early if object > aperture
  drm/i915: Check error code whilst moving buffer to GTT domain.
  drm/i915: Remove spurious warning "Failure to install fence"
  drm/i915: Rebind bo if currently bound with incorrect alignment.
  drm/i915: Include pitch in set_base debug statement.
  drm/i915: Only print "nothing to do" debug message as required.
  drm/i915: Propagate error from unbinding an unfenceable object.
  drm/i915: Avoid nesting of domain changes when setting display plane
  drm/i915: Hold the spinlock whilst resetting unpin_work along error path
  drm/i915: Only print an message if there was an error
  drm/i915: Clean up leftover bits from hws move to ring structure.
  drm/i915: Add CxSR support on Pineview DDR3
  ...

9 years agoFS-Cache: Remove unneeded null checks
Dan Carpenter [Tue, 1 Jun 2010 19:58:22 +0000]
FS-Cache: Remove unneeded null checks

fscache_write_op() makes unnecessary checks of the page variable to see if it
is NULL.  It can't be NULL at those points as the kernel would already have
crashed a little higher up where we examined page->index.

Furthermore, unless radix_tree_gang_lookup_tag() can return 1 but no page, a
NULL pointer crash should not be encountered there as we can only get there if
r_t_g_l_t() returned 1.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoperf buildid-list: Fix --with-hits event processing
Arnaldo Carvalho de Melo [Tue, 1 Jun 2010 15:37:05 +0000]
perf buildid-list: Fix --with-hits event processing

When we use plain 'perf buildid-list' we use only what is in the buildid
table in the perf.data header. And those have absolute pathnames because
at 'perf record' time we used __perf_session__process_events and that
doesn't sets up the path shortening code in map__new() that happens if
symbol_conf.full_paths is false, the default.

On the other hand, when we use 'perf buildid-list --with-hits' we
process all the events using perf_session__process_events, adding
entries to the global DSO list _after_ removing the current directory
from the DSO name, for presentation purposes.

Because of that we end up having two entries in the DSO list when
recording events for binaries using relative pathnames.

Fix it minimally by setting symbol_conf.full_paths to true when marking
the DSOs with hits in 'perf buildid-list --with-hits', as used by 'perf
archive'

Right fix longer term is to shorten the path only at presentation time.
Will be done for 2.6.36.

Reported-by: Stephane Eranian <eranian@google.com>
Tested-by: Stephane Eranian <eranian@google.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <20100601183837.GC4093@ghostprotocols.net>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>