11 years ago[ARM] MXC: add cpu_is_ macros
Sascha Hauer [Fri, 6 Feb 2009 14:38:22 +0000]
[ARM] MXC: add cpu_is_ macros

We had hardcoded cpu_is_ macros for mxc architectures till now. As we
want to run the same kernel on i.MX31 and i.MX35 this patch adds cpu_is_
macros which expand to 0 or 1 if only one architecture is compiled in and
only check for the cpu type if more than one architecture is compiled
in.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

11 years ago[ARM] MX35: Add register definitions for the i.MX35
Sascha Hauer [Mon, 2 Feb 2009 13:11:54 +0000]
[ARM] MX35: Add register definitions for the i.MX35

This patch moves the stuff common to i.MX31 and i.MX35 to mx3x.h and the
specifics to mx31.h/mx35.h. We can build a kernel which runs on i.MX31 and
i.MX35, so always include mx31.h and mx35.h

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

11 years agoimxfb: Fix margin settings
Sascha Hauer [Sat, 14 Feb 2009 15:29:38 +0000]
imxfb: Fix margin settings

The var->hsync_len, var->right_margin and var->left_margin fields
should contain the real values, not the hardware dependent values.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

11 years agoimxfb: add mx27 support
Sascha Hauer [Mon, 26 Jan 2009 16:29:10 +0000]
imxfb: add mx27 support

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

11 years agomx31: add dma and fb devices
Valentin Longchamp [Mon, 16 Feb 2009 11:47:52 +0000]
mx31: add dma and fb devices

This adds the dma (ipu_dma) and fb devices for the mx31 for which drivers now are
available.

v2: merge the ipu and fb device in the same patch as suggested by Sascha

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

11 years agomx31moboard: initial support for various baseboards
Valentin Longchamp [Mon, 16 Feb 2009 11:47:51 +0000]
mx31moboard: initial support for various baseboards

This enables our mx31moboard to be used on the different baseboards that
we are developping according to the application needs. There are not
many differences between the boards for now, but when other peripherals
are available for mx31 the differences are going to grow.

v2: takes Sascha's comments into account

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

11 years agomx31: add pin definition for LCD
Valentin Longchamp [Wed, 11 Feb 2009 15:55:17 +0000]
mx31: add pin definition for LCD

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

11 years agomxc: first set GPIO level, then switch direction to output
Guennadi Liakhovetski [Thu, 12 Feb 2009 13:27:22 +0000]
mxc: first set GPIO level, then switch direction to output

Make sure not to create spurious pulses on GPIOs, when configuring them as
output: first set required level, then switch direction.

Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

11 years agoarm/imx: Kconfig beautification
Holger Schurig [Thu, 29 Jan 2009 13:42:25 +0000]
arm/imx: Kconfig beautification

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

11 years ago[ARM] mxc: add missing include
Sascha Hauer [Thu, 29 Jan 2009 15:00:23 +0000]
[ARM] mxc: add missing include

include devices.h from devices.c to avoid inconsistencies and to fix
sparse warnings

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

11 years ago[ARM] Add Synertronixx scb9328 board support
Sascha Hauer [Wed, 28 Jan 2009 16:36:37 +0000]
[ARM] Add Synertronixx scb9328 board support

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

11 years ago[ARM] PCM037 Board: Add I2C support
Sascha Hauer [Wed, 28 Jan 2009 16:10:32 +0000]
[ARM] PCM037 Board: Add I2C support

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

11 years ago[ARM] iommux mx3: Add pin definitions for I2C
Sascha Hauer [Wed, 28 Jan 2009 16:11:02 +0000]
[ARM] iommux mx3: Add pin definitions for I2C

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

11 years ago[ARM] mx1ads: add I2C support
Sascha Hauer [Wed, 28 Jan 2009 13:06:20 +0000]
[ARM] mx1ads: add I2C support

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

11 years ago[ARM] PCM038 board: Add I2C support
Sascha Hauer [Wed, 28 Jan 2009 12:07:11 +0000]
[ARM] PCM038 board: Add I2C support

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

11 years ago[ARM] MX2: Add I2C devices / resources
Sascha Hauer [Wed, 28 Jan 2009 12:26:56 +0000]
[ARM] MX2: Add I2C devices / resources

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

11 years ago[ARM] MX2: add pwm device/resources
Sascha Hauer [Fri, 16 Jan 2009 14:17:46 +0000]
[ARM] MX2: add pwm device/resources

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

11 years ago[ARM] MXC: add pwm driver for i.MX SoCs
Sascha Hauer [Fri, 16 Jan 2009 14:17:16 +0000]
[ARM] MXC: add pwm driver for i.MX SoCs

This driver has been tested on MX27/MX31. It should work on MX1/MX1
aswell, but the actual setting of the PWM is missing so far.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

11 years agoimxfb: add 18 bit support
Sascha Hauer [Mon, 26 Jan 2009 16:31:02 +0000]
imxfb: add 18 bit support

v2: As pointed out by Hans J. Koch we have to claim we can do 24bit to
    make software like X work. We are lucky on i.MX that 18bit support
    has the necessary gaps in the fields to do so.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

11 years ago[ARM] pcm038: Add framebuffer support
Sascha Hauer [Thu, 15 Jan 2009 11:44:45 +0000]
[ARM] pcm038: Add framebuffer support

Add framebuffer support for PCM038

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

11 years agoimxfb: add platform specific init/exit functions
Sascha Hauer [Thu, 15 Jan 2009 14:37:22 +0000]
imxfb: add platform specific init/exit functions

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

11 years ago[ARM] MX2: Add FEC platform device
Sascha Hauer [Mon, 26 Jan 2009 16:26:02 +0000]
[ARM] MX2: Add FEC platform device

The in kernel FEC driver has recently been ported to a platform driver.
Add a platform_device for it and register it for pcm038 and mx27ads.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

11 years agomx31ads: Initial support for Wolfson Microelectronics 1133-EV1 module
Mark Brown [Thu, 15 Jan 2009 16:14:30 +0000]
mx31ads: Initial support for Wolfson Microelectronics 1133-EV1 module

The i.MX31ADS supports pluggable PMU modules, including the WM835x based
Wolfson Microelectronics 1133-EV1. These boards provide power, audio,
RTC and watchdiog services to the system. This patch adds initial support
for those boards in I2C mode.

Currently support is limited by the available support for the features
of the i.MX31 in the mainline kernel.  Some further work will be needed
once other PMU modules are supported and once there is SPI support.
Many of the regulator constraints will be sharable with other PMU
boards.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

11 years agopcm037: use of new iomux implementation
Valentin Longchamp [Wed, 28 Jan 2009 14:13:54 +0000]
pcm037: use of new iomux implementation

This was only compilation tested.

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

11 years agomx31pdk: use of new iomux implementation
Valentin Longchamp [Wed, 28 Jan 2009 14:13:53 +0000]
mx31pdk: use of new iomux implementation

This was only compilation tested.

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

11 years agomx31ads: use of new iomux implementation
Valentin Longchamp [Wed, 28 Jan 2009 14:13:52 +0000]
mx31ads: use of new iomux implementation

This was only compilation tested.

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

11 years agomx31moboard: use of new iomux implementation
Valentin Longchamp [Wed, 28 Jan 2009 14:13:51 +0000]
mx31moboard: use of new iomux implementation

This example takes advantage of the possibility to use tables of iomux
configs.
This is inspired from mx1-mx2 iomux code. It allows a better code
readability.

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

11 years agomx31: rework of iomux support
Valentin Longchamp [Wed, 28 Jan 2009 14:13:50 +0000]
mx31: rework of iomux support

This new implemenatation avoids that two physical pins are claimed by
the same driver (also with the the gpr hardware modes).
The gpio kernel lib is also called when a capable gpio pin is assigned
its gpio function.
The mxc_iomux_mode function is still here for backward compatibility but
should not be used anymore.

V2:

In the precendent revision, the iomux code was claiming a pin when its
hardware mode was changed. This was uncorrect: when the hardware mode is
changed, the pin must still be claimed through the iomux.

In order to have a pin working in mode hw2, we must fist issue the
mxc_iomux_set_gpr call and then the corresponding mxc_iomux_mode calls
with the FUNC mode (usually done with mxc_iomux_setup_multiple_pins).
The reverse calls must be done to fee the pins.

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

11 years agoremove unused static function gpio_fec_inactive
Uwe Kleine-König [Wed, 21 Jan 2009 20:25:02 +0000]
remove unused static function gpio_fec_inactive

... from both mx27ads.c and pcm038.c

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Holger Schurig <hs4233@mail.mn-solutions.de>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Martin Fuzzey <mfuzzey@gmail.com>

11 years agofix warning "control reaches end of non-void function"
Uwe Kleine-König [Wed, 21 Jan 2009 20:25:03 +0000]
fix warning "control reaches end of non-void function"

Add a return 0 analogous to uart_mxc_port[0-2]_exit.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Holger Schurig <hs4233@mail.mn-solutions.de>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Martin Fuzzey <mfuzzey@gmail.com>

11 years agomx31ads: Make unexported data static
Mark Brown [Thu, 15 Jan 2009 16:14:29 +0000]
mx31ads: Make unexported data static

Keeps sparse happy.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

11 years agomx31ads: Fix build for missing mx31.h
Mark Brown [Thu, 15 Jan 2009 16:14:28 +0000]
mx31ads: Fix build for missing mx31.h

Several of the macros in mx31ads.h depend on mx31.h which is no longer
included in quite so many standard headers as it once was. Include it
directly so we can build.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

11 years agomx31: Add device definitions for the i.MX3x I2C controllers
Mark Brown [Thu, 15 Jan 2009 16:14:27 +0000]
mx31: Add device definitions for the i.MX3x I2C controllers

The i.MX I2C driver has not yet been merged into mainline but it is
near to that and the device defintions don't depend directly on it
so we can add the devices now.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

11 years agoarm/imx21: Framebuffer support for i.MX21
Holger Schurig [Mon, 26 Jan 2009 15:34:56 +0000]
arm/imx21: Framebuffer support for i.MX21

This patch mimicks what Martin wrote on the mailing list:

* move arch/arm/mach-imx/include/mach/imxfb.h into
  arch/arm/mach-mxc/include/mach/imxfb.h
* changes Kconfig so that CONFIG_FB_IMX is selectable
* adds a platform device (copied from some pengutronix
  patches)

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

11 years agoarm/imx21: clock support for i.MX21
Holger Schurig [Mon, 26 Jan 2009 15:34:54 +0000]
arm/imx21: clock support for i.MX21

Based on code from "Martin Fuzzey" <mfuzzey@gmail.com>

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

11 years agoarm/imx2x: split i.MX21/i.MX27 register definitions
Holger Schurig [Mon, 26 Jan 2009 15:34:53 +0000]
arm/imx2x: split i.MX21/i.MX27 register definitions

* define new CONFIG_ARCH_MX21 (this one is currently mutually exclusive to
  CONFIG_ARCH_MX27, but this might change)
* splits one header file. Memory definitions, interrupt sources,
  DMA channels are split into common part, i.MX27 specific and i.MX21
  specific.
* guard access to UART5/UART6, which don't exist on i.MX21

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

11 years agoarm/imx2x: removes a bunch of sparse-warnings
Holger Schurig [Mon, 26 Jan 2009 15:34:51 +0000]
arm/imx2x: removes a bunch of sparse-warnings

Here are some of the warnings that get fixed by this:

> 200 times: warning: cast adds address space to expression (<asn:2>)
twelve times: warning: symbol 'xxx' was not declared. Should it be static
two times: warning: symbol 'clock' shadows an earlier one
five times: warning: incorrect type in initializer (different address spaces)

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

11 years ago[ARM] MX27 Clock rework
Sascha Hauer [Mon, 16 Feb 2009 14:13:43 +0000]
[ARM] MX27 Clock rework

This changes MX27 to use common clkdev. It also cleans up MX27 clock
support to be more readable.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

11 years ago[ARM] MXC: add clkdev support
Sascha Hauer [Mon, 16 Feb 2009 13:27:06 +0000]
[ARM] MXC: add clkdev support

This patch only adds general clkdev support without actually switching
any MXC architecture to clkdev.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

11 years ago[ARM] MXC: remove _clk suffix from clock names
Sascha Hauer [Mon, 16 Feb 2009 13:29:10 +0000]
[ARM] MXC: remove _clk suffix from clock names

The context makes it clear already that these are clocks, so there's
no need for such a suffix. This patch only changes the clocks actually
used in the tree. The remaining clocks are renamed in the subsequent
architecture specific patches.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

11 years ago[ARM] MXC: rework timer/clock initialisation
Sascha Hauer [Mon, 16 Feb 2009 13:36:49 +0000]
[ARM] MXC: rework timer/clock initialisation

- rename mxc_clocks_init to architecture specific versions. This
  allows us to have more than one architecture compiled in.
- call mxc_timer_init from clock initialisation instead from board
  code

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

11 years ago[ARM] MXC: Use a single function for decoding a PLL
Sascha Hauer [Mon, 26 Jan 2009 14:41:16 +0000]
[ARM] MXC: Use a single function for decoding a PLL

We had 3 versions of this function in clock support for MX1/2/3
Use a single one instead. I picked the one from the MX3 as it seems
to calculate more accurate as the other ones. Also, on MX27 and MX31 mfn
can be negative, this hasn't been handled correctly on MX27 since now.

This patch has been tested on MX27 and MX31 and produces the same clock
frequencies for me.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

11 years agoarm/imx21: add kbuild support for the Freescale i.MX21
Holger Schurig [Mon, 26 Jan 2009 15:34:52 +0000]
arm/imx21: add kbuild support for the Freescale i.MX21

* adds Kconfig variables
* specifies different physical address for i.MX21 because of the
  different memory layouts
* disables support for UART5/UART6 in the i.MX serial driver
  (the i.MX21 doesn't have those modules)

Based on code from "Martin Fuzzey" <mfuzzey@gmail.com>

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

11 years agoarm/imx2x: new IOMUX definitions
Holger Schurig [Thu, 29 Jan 2009 09:07:50 +0000]
arm/imx2x: new IOMUX definitions

* removed iomux-mx1-mx2.h completely
* distributes the former contents to four different files (iomux-mx1.h,
  iomux-mx21.h, iomux-mx27.h and the file iomux-mx2x.h, which is common to
  both i.MX21 and i.MX27).
* adds all documented IOMUX definitions for i.MX21 and i.MX27
* fixes a few that were wrong (PD14_AOUT_FEC_CLR, PE16_AF_RTCK).
* don't silenly include <linux/io.h>
* and fixes all collateral damage from above

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

11 years agoi810: fix kernel crash fix when struct fb_var_screeninfo is supplied
Samuel CUELLA [Tue, 10 Mar 2009 19:56:00 +0000]
i810: fix kernel crash fix when struct fb_var_screeninfo is supplied

Prevent the kernel from being crashed by a divide-by-zero operation when
supplied an incorrectly filled 'struct fb_var_screeninfo' from userland.

Previously i810_main.c:1005 (i810_check_params) was using the global
'yres' symbol previously defined at i810_main.c:145 as a module parameter
value holder (i810_main.c:2174).  If i810fb is compiled-in or if this
param doesn't get a default value, this direct usage leads to a
divide-by-zero at i810_main.c:1005 (i810_check_params).  The patch simply
replace the 'yres' global, perhaps undefined symbol usage by a given
parameter structure lookup.

This problem occurs with directfb, mplayer -vo fbdev, SDL library.
It was also reported ( but non solved ) at:

http://mail.directfb.org/pipermail/directfb-dev/2008-March/004050.html

Signed-off-by: Samuel CUELLA <samuel.cuella@supinfo.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agom68knommu: m528x build fix
Steven King [Tue, 10 Mar 2009 19:55:58 +0000]
m68knommu: m528x build fix

There isn't any mcfqspi.h in the tree, and without it everything inside the
#ifdef CONFIG_SPI is uncompilable.

Signed-off-by: Steven King <sfking@fdwdc.com>
Acked-by: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agom68knommu: m5206e build fix
Steven King [Tue, 10 Mar 2009 19:55:57 +0000]
m68knommu: m5206e build fix

Signed-off-by: Steven King <sfking@fdwdc.com>
Acked-by: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agorcu: documentation 1Q09 update
Paul E. McKenney [Tue, 10 Mar 2009 19:55:57 +0000]
rcu: documentation 1Q09 update

Update the RCU documentation to call out the need for callers of
primitives like call_rcu() and synchronize_rcu() to prevent subsequent RCU
readers from hazard.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agokernel/user.c: fix a memory leak when freeing up non-init usernamespaces users
Dhaval Giani [Tue, 10 Mar 2009 19:55:56 +0000]
kernel/user.c: fix a memory leak when freeing up non-init usernamespaces users

We were returning early in the sysfs directory cleanup function if the
user belonged to a non init usernamespace.  Due to this a lot of the
cleanup was not done and we were left with a leak.  Fix the leak.

Reported-by: Serge Hallyn <serue@linux.vnet.ibm.com>
Signed-off-by: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Tested-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agomtd: physmap: fix NULL pointer dereference in error path
Atsushi Nemoto [Tue, 10 Mar 2009 19:55:55 +0000]
mtd: physmap: fix NULL pointer dereference in error path

commit e480814f138cd5d78a8efe397756ba6b6518fdb6 ("[MTD] [MAPS] physmap:
fix wrong free and del_mtd_{partition,device}") introduces a NULL pointer
dereference in physmap_flash_remove when called from the error path in
physmap_flash_probe (if map_probe failed).

Call del_mtd_{partition,device} only if info->cmtd was not NULL.

Reported-by: pHilipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agointel-agp: fix a panic with 1M of shared memory, no GTT entries
Lubomir Rintel [Tue, 10 Mar 2009 19:55:54 +0000]
intel-agp: fix a panic with 1M of shared memory, no GTT entries

When GTT size is equal to amount of video memory, the amount of GTT
entries is computed lower than zero, which is invalid and leads to
off-by-one error in intel_i915_configure()

Originally posted here:
http://bugzilla.kernel.org/show_bug.cgi?id=12539
http://bugzilla.redhat.com/show_bug.cgi?id=445592

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Cc: Lubomir Rintel <lkundrak@v3.sk>
Cc: Dave Airlie <airlied@linux.ie>
Reviewed-by: Eric Anholt <eric@anholt.net>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agomtd_dataflash: fix probing of AT45DB321C chips.
Will Newton [Tue, 10 Mar 2009 19:55:53 +0000]
mtd_dataflash: fix probing of AT45DB321C chips.

Commit 771999b65f79264acde4b855e5d35696eca5e80c ("[MTD] DataFlash: bugfix,
binary page sizes now handled") broke support for probing AT45DB321C flash
chips.  These chips do not support the "page size" status bit, so if we
match the JEDEC id return early.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Will Newton <will.newton@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoidr: make idr_remove_all() do removal -before- free_layer()
Paul E. McKenney [Tue, 10 Mar 2009 19:55:52 +0000]
idr: make idr_remove_all() do removal -before- free_layer()

Fix a problem in the IDR system, where an idr_remove_all() hands a data
element to call_rcu() (via free_layer()) before making that data element
inaccessible to new readers.  This is very bad, and results in readers
still having a reference to this data element at the end of the grace
period.

Tests on large machines that concurrently map and unmap user-space memory
within the same multithreaded process result in crashes within about five
minutes.  Applying this patch increases the kernel's longevity to the
three-to-eight-hour range.

There appear to be other similar problems in idr_get_empty_slot() and
sub_remove(), but I fixed the easy one in idr_remove_all() first.  It is
therefore no surprise that failures still occur.

Located-by: Milton Miller II <miltonm@austin.ibm.com>
Tested-by: Milton Miller II <miltonm@austin.ibm.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agodevpts: remove graffiti
Alexey Dobriyan [Tue, 10 Mar 2009 19:55:51 +0000]
devpts: remove graffiti

Very annoying when working with containters.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agox86/agp: tighten check to update amd nb aperture
Yinghai Lu [Tue, 10 Mar 2009 19:55:50 +0000]
x86/agp: tighten check to update amd nb aperture

Impact: fix bug to make agp work with dri

Jeffrey reported that dri does work with 64bit, but doesn't work with
32bit it turns out NB aperture is 32M, aperture on agp is 128M

64bit is using 64M for vaidation for 64 iommu/gart 32bit is only using
32M..., and will not update the nb aperture.

So try to compare nb apterture and agp apterture before leaving not
touch nb aperture.

Reported-by: Jeffrey Trull <jetrull@sbcglobal.net>
Tested-by: Jeffrey Trull <jetrull@sbcglobal.net>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Dave Airlie <airlied@linux.ie>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoxtensa: fix compilation somewhat
Alexey Dobriyan [Tue, 10 Mar 2009 19:55:49 +0000]
xtensa: fix compilation somewhat

* ->put_char changes
 * HIGHMEM is bogus it seems, there is no kmap_atomic() et al
 * some includes

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Chris Zankel <zankel@tensilica.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agolm85: add VRM10 support for adt7468 chip
Darrick J. Wong [Tue, 10 Mar 2009 19:55:48 +0000]
lm85: add VRM10 support for adt7468 chip

The adt7468 chip supports VRM10 sensors just like the adt7463; add a
missing check for it.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agolm85: fix the version check that broke adt7468 probing
Darrick J. Wong [Tue, 10 Mar 2009 19:55:47 +0000]
lm85: fix the version check that broke adt7468 probing

The verstep check in the lm85 driver fails because the upper nibble of
the version register is 0x7, not 0x6, on the adt7468 chip.  Probing of
all adt7468s was broken by 69fc1feba2d5856ff74dedb6ae9d8c490210825c
("hwmon: (lm85) Rework the device detection"), and this patch fixes
that.  Also add in a missing i2c_device_id that accidentally got dropped
from the original patch.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agomenu: fix embedded menu snafu
Randy Dunlap [Tue, 10 Mar 2009 19:55:46 +0000]
menu: fix embedded menu snafu

The COMPAT_BRK kconfig symbol does not depend on EMBEDDED, but it is in
the midst of the EMBEDDED menu symbols, so it mucks up the EMBEDDED menu.
Fix by moving it to just after all of the EMBEDDED menu symbols.  Also,
ANON_INODES has a similar problem, so move it to just above the EMBEDDED
menu items since it is used in the EMBEDDED menu.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agomm: get_nid_for_pfn() returns int
Roel Kluin [Tue, 10 Mar 2009 19:55:45 +0000]
mm: get_nid_for_pfn() returns int

get_nid_for_pfn() returns int

Presumably the (nid < 0) case has never happened.

We do know that it is happening on one system while creating a symlink for
a memory section so it should also happen on the same system if
unregister_mem_sect_under_nodes() were called to remove the same symlink.

The test was actually added in response to a problem with an earlier
version reported by Yasunori Goto where one or more of the leading pages
of a memory section on the 2nd node of one of his systems was
uninitialized because I believe they coincided with a memory hole.

That earlier version did not ignore uninitialized pages and determined
the nid by considering only the 1st page of each memory section.  This
caused the symlink to the 1st memory section on the 2nd node to be
incorrectly created in /sys/devices/system/node/node0 instead of
/sys/devices/system/node/node1.  The problem was fixed by adding the
test to skip over uninitialized pages.

I suspect we have not seen any reports of the non-removal
of a symlink due to the incorrect declaration of the nid
variable in unregister_mem_sect_under_nodes() because
  - systems where a memory section could have an uninitialized
    range of leading pages are probably rare.
  - memory remove is probably not done very frequently on the
    systems that are capable of demonstrating the problem.
  - lingering symlink(s) that should have been removed may
    have simply gone unnoticed.

[garyhade@us.ibm.com: wrote changelog]
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: Gary Hade <garyhade@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoMerge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Tue, 10 Mar 2009 19:03:30 +0000]
Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86 mmiotrace: fix remove_kmmio_fault_pages()

11 years agoMerge branch 'sh/for-2.6.29' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal...
Linus Torvalds [Tue, 10 Mar 2009 16:31:19 +0000]
Merge branch 'sh/for-2.6.29' of git://git./linux/kernel/git/lethal/sh-2.6

* 'sh/for-2.6.29' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  video: deferred io cleanup fix for sh_mobile_lcdcfb
  sh: Add media/soc_camera.h to board setup of Renesas AP325RXA

11 years agovideo: deferred io cleanup fix for sh_mobile_lcdcfb
Magnus Damm [Tue, 10 Mar 2009 06:08:49 +0000]
video: deferred io cleanup fix for sh_mobile_lcdcfb

Fix deferred io cleanup patch in the sh_mobile_lcdcfb driver.

If probe() fails early the sh_mobile_lcdc_stop() function will
be called to clean up deferred io. This patch modifies the
code to only call fb_deferred_io_cleanup() after deferred io
has been initialized.

With this patch applied we no longer hit BUG_ON() inside
fb_deferred_io_cleanup(). Triggers on a Migo-R with the
SYS QVGA panel board unmounted.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

11 years agosh: Add media/soc_camera.h to board setup of Renesas AP325RXA
Nobuhiro Iwamatsu [Fri, 6 Mar 2009 02:51:14 +0000]
sh: Add media/soc_camera.h to board setup of Renesas AP325RXA

Other compilation errors were revised by commit of
"sh: ap325rxa: Revert ov772x support"
(08c2f5b4d76f83213e379b12df504269d21c9e7c) but other compilation
errors are given.
We revert this commit and need to add new header(media/soc_camera.h).
This change revises new compilation error.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

11 years agoMerge branch 'for-linus' of git://neil.brown.name/md
Linus Torvalds [Tue, 10 Mar 2009 03:50:11 +0000]
Merge branch 'for-linus' of git://neil.brown.name/md

* 'for-linus' of git://neil.brown.name/md:
  md: fix deadlock when stopping arrays

11 years agoMerge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq
Linus Torvalds [Mon, 9 Mar 2009 20:23:59 +0000]
Merge branch 'fixes' of git://git./linux/kernel/git/davej/cpufreq

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ] Add p4-clockmod sysfs-ui removal to feature-removal schedule.
  Revert "[CPUFREQ] Disable sysfs ui for p4-clockmod."

11 years agocopy_process: fix CLONE_PARENT && parent_exec_id interaction
Oleg Nesterov [Mon, 2 Mar 2009 21:58:45 +0000]
copy_process: fix CLONE_PARENT && parent_exec_id interaction

CLONE_PARENT can fool the ->self_exec_id/parent_exec_id logic. If we
re-use the old parent, we must also re-use ->parent_exec_id to make
sure exit_notify() sees the right ->xxx_exec_id's when the CLONE_PARENT'ed
task exits.

Also, move down the "p->parent_exec_id = p->self_exec_id" thing, to place
two different cases together.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Serge E. Hallyn <serge@hallyn.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years ago[CPUFREQ] Add p4-clockmod sysfs-ui removal to feature-removal schedule.
Dave Jones [Mon, 9 Mar 2009 19:14:37 +0000]
[CPUFREQ] Add p4-clockmod sysfs-ui removal to feature-removal schedule.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Dave Jones <davej@redhat.com>

11 years agoRevert "[CPUFREQ] Disable sysfs ui for p4-clockmod."
Dave Jones [Mon, 9 Mar 2009 19:07:33 +0000]
Revert "[CPUFREQ] Disable sysfs ui for p4-clockmod."

This reverts commit e088e4c9cdb618675874becb91b2fd581ee707e6.

Removing the sysfs interface for p4-clockmod was flagged as a
regression in bug 12826.

Course of action:
 - Find out the remaining causes of overheating, and fix them
   if possible. ACPI should be doing the right thing automatically.
   If it isn't, we need to fix that.
 - mark p4-clockmod ui as deprecated
 - try again with the removal in six months.

It's not really feasible to printk about the deprecation, because
it needs to happen at all the sysfs entry points, which means adding
a lot of strcmp("p4-clockmod".. calls to the core, which.. bleuch.

Signed-off-by: Dave Jones <davej@redhat.com>

11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Mon, 9 Mar 2009 16:15:40 +0000]
Merge git://git./linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (29 commits)
  p54: fix race condition in memory management
  cfg80211: test before subtraction on unsigned
  iwlwifi: fix error flow in iwl*_pci_probe
  rt2x00 : more devices to rt73usb.c
  rt2x00 : more devices to rt2500usb.c
  bonding: Fix device passed into ->ndo_neigh_setup().
  vlan: Fix vlan-in-vlan crashes.
  net: Fix missing dev->neigh_setup in register_netdevice().
  tmspci: fix request_irq race
  pkt_sched: act_police: Fix a rate estimator test.
  tg3: Fix 5906 link problems
  SCTP: change sctp_ctl_sock_init() to try IPv4 if IPv6 fails
  IPv6: add "disable" module parameter support to ipv6.ko
  sungem: another error printed one too early
  aoe: error printed 1 too early
  net pcmcia: worklimit reaches -1
  net: more timeouts that reach -1
  net: fix tokenring license
  dm9601: new vendor/product IDs
  netlink: invert error code in netlink_set_err()
  ...

11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus
Linus Torvalds [Mon, 9 Mar 2009 16:14:17 +0000]
Merge git://git./linux/kernel/git/rusty/linux-2.6-for-linus

* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  lguest: fix for CONFIG_SPARSE_IRQ=y
  lguest: fix crash 'unhandled trap 13 at <native_read_msr_safe>'

11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable
Linus Torvalds [Mon, 9 Mar 2009 16:13:16 +0000]
Merge git://git./linux/kernel/git/mason/btrfs-unstable

* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
  Btrfs: fix spinlock assertions on UP systems

11 years agoBtrfs: fix spinlock assertions on UP systems
Chris Mason [Mon, 9 Mar 2009 15:45:38 +0000]
Btrfs: fix spinlock assertions on UP systems

btrfs_tree_locked was being used to make sure a given extent_buffer was
properly locked in a few places.  But, it wasn't correct for UP compiled
kernels.

This switches it to using assert_spin_locked instead, and renames it to
btrfs_assert_tree_locked to better reflect how it was really being used.

Signed-off-by: Chris Mason <chris.mason@oracle.com>

11 years agoFix fixpoint divide exception in acct_update_integrals
Heiko Carstens [Mon, 9 Mar 2009 12:31:59 +0000]
Fix fixpoint divide exception in acct_update_integrals

Frans Pop reported the crash below when running an s390 kernel under Hercules:

  Kernel BUG at 000738b4  verbose debug info unavailable!
  fixpoint divide exception: 0009  #1! SMP
  Modules linked in: nfs lockd nfs_acl sunrpc ctcm fsm tape_34xx
     cu3088 tape ccwgroup tape_class ext3 jbd mbcache dm_mirror dm_log dm_snapshot
     dm_mod dasd_eckd_mod dasd_mod
  CPU: 0 Not tainted 2.6.27.19 #13
  Process awk (pid: 2069, task: 0f9ed9b8, ksp: 0f4f7d18)
  Krnl PSW : 070c1000 800738b4 (acct_update_integrals+0x4c/0x118)
             R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:0 CC:1 PM:0
  Krnl GPRS: 00000000 000007d0 7fffffff fffff830
             00000000 ffffffff 00000002 0f9ed9b8
             00000000 00008ca0 00000000 0f9ed9b8
             0f9edda4 8007386e 0f4f7ec8 0f4f7e98
  Krnl Code: 800738aa: a71807d0         lhi     %r1,2000
             800738ae: 8c200001         srdl    %r2,1
             800738b2: 1d21             dr      %r2,%r1
            >800738b4: 5810d10e         l       %r1,270(%r13)
             800738b8: 1823             lr      %r2,%r3
             800738ba: 4130f060         la      %r3,96(%r15)
             800738be: 0de1             basr    %r14,%r1
             800738c0: 5800f060         l       %r0,96(%r15)
  Call Trace:
  ( <000000000004fdea>! blocking_notifier_call_chain+0x1e/0x2c)
    <0000000000038502>! do_exit+0x106/0x7c0
    <0000000000038c36>! do_group_exit+0x7a/0xb4
    <0000000000038c8e>! SyS_exit_group+0x1e/0x30
    <0000000000021c28>! sysc_do_restart+0x12/0x16
    <0000000077e7e924>! 0x77e7e924

Reason for this is that cpu time accounting usually only happens from
interrupt context, but acct_update_integrals gets also called from
process context with interrupts enabled.

So in acct_update_integrals we may end up with the following scenario:

Between reading tsk->stime/tsk->utime and tsk->acct_timexpd an interrupt
happens which updates accouting values.  This causes acct_timexpd to be
greater than the former stime + utime.  The subsequent calculation of

dtime = cputime_sub(time, tsk->acct_timexpd);

will be negative and the division performed by

cputime_to_jiffies(dtime)

will generate an exception since the result won't fit into a 32 bit
register.

In order to fix this just always disable interrupts while accessing any
of the accounting values.

Reported by: Frans Pop <elendil@planet.nl>
Tested by: Frans Pop <elendil@planet.nl>
Cc: stable@kernel.org
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agolguest: fix for CONFIG_SPARSE_IRQ=y
Rusty Russell [Mon, 9 Mar 2009 16:06:28 +0000]
lguest: fix for CONFIG_SPARSE_IRQ=y

Impact: remove lots of lguest boot WARN_ON() when CONFIG_SPARSE_IRQ=y

We now need to call irq_to_desc_alloc_cpu() before
set_irq_chip_and_handler_name(), but we can't do that from init_IRQ (no
kmalloc available).

So do it as we use interrupts instead.  Also means we only alloc for
irqs we use, which was the intent of CONFIG_SPARSE_IRQ anyway.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Ingo Molnar <mingo@redhat.com>

11 years agolguest: fix crash 'unhandled trap 13 at <native_read_msr_safe>'
Rusty Russell [Mon, 9 Mar 2009 16:06:22 +0000]
lguest: fix crash 'unhandled trap 13 at <native_read_msr_safe>'

Impact: fix lguest boot crash on modern Intel machines

The code in early_init_intel does:

if (c->x86 > 6 || (c->x86 == 6 && c->x86_model >= 0xd)) {
u64 misc_enable;

rdmsrl(MSR_IA32_MISC_ENABLE, misc_enable);

And that rdmsr faults (not allowed from non-0 PL).  We can get around
this by mugging the family ID part of the cpuid.  5 seems like a good
number.

Of course, this is a hack (how very lguest!).  We could just indicate
that we don't support MSRs, or implement lguest_rdmst.

Reported-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Tested-by: Patrick McHardy <kaber@trash.net>

11 years agox86 mmiotrace: fix remove_kmmio_fault_pages()
Stuart Bennett [Sun, 8 Mar 2009 18:21:35 +0000]
x86 mmiotrace: fix remove_kmmio_fault_pages()

Impact: fix race+crash in mmiotrace

The list manipulation in remove_kmmio_fault_pages() was broken. If more
than one consecutive kmmio_fault_page was re-added during the grace
period between unregister_kmmio_probe() and remove_kmmio_fault_pages(),
the list manipulation failed to remove pages from the release list.

After a second grace period the pages get into rcu_free_kmmio_fault_pages()
and raise a BUG_ON() kernel crash.

The list manipulation is fixed to properly remove pages from the release
list.

This bug has been present from the very beginning of mmiotrace in the
mainline kernel. It was introduced in 0fd0e3da ("x86: mmiotrace full
patch, preview 1");

An urgent fix for Linus. Tested by Stuart (on 32-bit) and Pekka
(on amd and intel 64-bit systems, nouveau and nvidia proprietary).

Signed-off-by: Stuart Bennett <stuart@freedesktop.org>
Signed-off-by: Pekka Paalanen <pq@iki.fi>
LKML-Reference: <20090308202135.34933feb@daedalus.pq.iki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc
Linus Torvalds [Sun, 8 Mar 2009 17:37:57 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/drzeus/mmc

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc:
  mmc: fix data timeout for SEND_EXT_CSD

11 years agoMerge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sun, 8 Mar 2009 17:30:18 +0000]
Merge branch 'core-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  rcu: increment quiescent state counter in ksoftirqd()

11 years agoMerge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Sun, 8 Mar 2009 17:27:13 +0000]
Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, pebs: correct qualifier passed to ds_write_config() from ds_request_pebs()
  x86, bts: remove bad warning
  x86: add Dell XPS710 reboot quirk
  x86, math-emu: fix init_fpu for task != current
  x86: EFI: Back efi_ioremap with init_memory_mapping instead of FIX_MAP
  x86: fix DMI on EFI

11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog
Linus Torvalds [Sun, 8 Mar 2009 17:25:13 +0000]
Merge git://git./linux/kernel/git/wim/linux-2.6-watchdog

* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  [WATCHDOG] orion5x_wdt.c: 'ORION5X_TCLK' undeclared
  [WATCHDOG] gef_wdt.c: fsl_get_sys_freq() failure not noticed
  [WATCHDOG] ks8695_wdt.c: 'CLOCK_TICK_RATE' undeclared
  [WATCHDOG] rc32434_wdt: fix sections
  [WATCHDOG] rc32434_wdt: fix watchdog driver

11 years agoMerge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Linus Torvalds [Sun, 8 Mar 2009 17:24:57 +0000]
Merge branch 'for_linus' of git://git./linux/kernel/git/tytso/ext4

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: fix ext4_free_inode() vs. ext4_claim_inode() race

11 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney...
Linus Torvalds [Sun, 8 Mar 2009 17:24:39 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/cooloney/blackfin-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: (28 commits)
  Blackfin arch: SPI_MMC is now mainlined MMC_SPI
  Blackfin arch: disable legacy /proc/scsi/ support by default
  Blackfin arch: remove duplicated ANOMALY_05000448 ifdef check
  Blackfin arch: add stubs for anomalies 447 and 448
  Blackfin arch: cleanup bfin_sport.h header and export it to userspace
  Blackfin arch: fix bug - gdb signull case make trunk kernel panic frequently
  Blackfin arch: remove spurious dash when dcache is off
  Blackfin arch: mark init_pda as __init as only __init funcs all it
  Blackfin arch: fix bug - On bf548-ezkit, ethernet fails to work after wakeup from "mem"
  Blackfin arch: Random read/write errors are a bad thing
  Blackfin arch: update default kernel config, select KSZ8893M driver for BF518
  Blackfin arch: Fix bug - KGDB single step into the middle of a 4 bytes instruction on bf561 after soft bp is hit
  Blackfin arch: Fix bug - make ksz8893m driver available when bfin_mac is enabled
  Blackfin arch: make sure people do not set the kernel load address too high
  Blackfin arch: fix bug - The SPORT_HYS bit is not set for BF561 0.5
  Blackfin arch: update anomaly sheets to match latest public info
  Blackfin arch: Fix BUG - kernel fails to build in pm.c when allow wakeup fromi standby by GPIO
  Blackfin arch: PM_BFIN_WAKE_GP: update help
  Blackfin arch: fix bug - kgdb fails to continue after setting breakpoint on bf561-ezkit kernel with smp patch
  Blackfin arch: Enable Write Back Cache on all Blackfin Boards
  ...

11 years agoMerge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx
Linus Torvalds [Sun, 8 Mar 2009 17:23:05 +0000]
Merge branch 'fixes' of git://git./linux/kernel/git/djbw/async_tx

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx:
  dmatest: fix use after free in dmatest_exit
  ipu_idmac: fix spinlock type
  iop-adma, mv_xor: fix mem leak on self-test setup failure
  fsldma: fix off by one in dma_halt
  I/OAT: fail self-test if callback test reaches timeout
  I/OAT: update driver version and copyright dates
  I/OAT: list usage cleanup
  I/OAT: set tcp_dma_copybreak to 256k for I/OAT ver.3
  I/OAT: cancel watchdog before dma remove
  I/OAT: fail initialization on zero channels detection
  I/OAT: do not set DCACTRL_CMPL_WRITE_ENABLE for I/OAT ver.3
  I/OAT: add verification for proper APICID_TAG_MAP setting by BIOS
  dmaengine: update kerneldoc

11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6
Linus Torvalds [Sun, 8 Mar 2009 17:22:22 +0000]
Merge git://git./linux/kernel/git/bart/ide-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6:
  ata: add CFA specific identify data words
  remove stale comment from <linux/hdreg.h>
  AT91: initialize Compact Flash on AT91SAM9263 cpu
  ide: add at91_ide driver
  ide: allow to wrap interrupt handler
  ide-iops: fix odd-length ATAPI PIO transfers
  ide: NULL noise: drivers/ide/ide-*.c
  ide: expiry() returns int, negative expiry() return values won't be noticed

11 years agoMerge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzi...
Linus Torvalds [Sun, 8 Mar 2009 17:22:01 +0000]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/jgarzik/libata-dev

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  libata: Don't trust current capacity values in identify words 57-58
  libata: make sure port is thawed when skipping resets
  sata_nv: fix module parameter description
  ahci: Add the Device IDs for MCP89 and remove IDs of MCP7B to/from ahci.c
  libata: don't use on-stack sense buffer
  libata: align ap->sector_buf
  libata: fix dma_unmap_sg misuse
  libata: change drive ready wait after hard reset to 5s

11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/pkl/squashfs-linus
Linus Torvalds [Sun, 8 Mar 2009 17:21:31 +0000]
Merge git://git./linux/kernel/git/pkl/squashfs-linus

* git://git.kernel.org/pub/scm/linux/kernel/git/pkl/squashfs-linus:
  Squashfs: frag_size should be signed, as it can hold an error result
  Squashfs: fix documentation typo, Cramfs filesystem limit is 256 MiB
  Squashfs: Fix oops when reading fsfuzzer corrupted filesystems

11 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris...
Linus Torvalds [Sun, 8 Mar 2009 17:21:10 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
  smack: fixes for unlabeled host support

11 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Linus Torvalds [Sun, 8 Mar 2009 17:14:19 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: serio - fix protocol number for TouchIT213

11 years agoMerge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
Linus Torvalds [Sun, 8 Mar 2009 17:13:28 +0000]
Merge branch 'release' of git://git./linux/kernel/git/aegl/linux-2.6

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] fix PCI DMA flag propagation on SN (Altix) with PICs

11 years agoMerge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
Linus Torvalds [Sun, 8 Mar 2009 17:08:57 +0000]
Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  block: fix missing bio back/front segment size setting in blk_recount_segments()
  loop: don't increment p->offset with (size_t) -EINVAL
  cciss: remove 30 second initial timeout on controller reset
  Fix kernel NULL pointer dereference in xen-blkfront

11 years agoMerge branch 'fix/hda' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
Linus Torvalds [Sun, 8 Mar 2009 17:03:31 +0000]
Merge branch 'fix/hda' of git://git./linux/kernel/git/tiwai/sound-2.6

* 'fix/hda' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: hda - Fix headphone-detect regression with multiple HP jacks
  ALSA: hda - Fix typos in slave controls in patch_sigmatel.c

11 years agoMIPS: compat: Implement is_compat_task.
Ralf Baechle [Thu, 5 Mar 2009 10:45:48 +0000]
MIPS: compat: Implement is_compat_task.

This is a build fix required after "x86-64: seccomp: fix 32/64 syscall
hole" (commit 5b1017404aea6d2e552e991b3fd814d839e9cd67).  MIPS doesn't
have the issue that was fixed for x86-64 by that patch.

This also doesn't solve the N32 issue which is that N32 seccomp processes
will be treated as non-compat processes thus only have access to N64
syscalls.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agommc: fix data timeout for SEND_EXT_CSD
Adrian Hunter [Tue, 10 Feb 2009 14:32:33 +0000]
mmc: fix data timeout for SEND_EXT_CSD

Commit 0d3e0460f307e84904968aad6cff97bd688583d8
"MMC: CSD and CID timeout values" inadvertently broke
the timeout for the MMC command SEND_EXT_CSD.

This patch puts it back again.

Depending on the characteristics of the controller,
this bug may prevent the use of MMC cards.

Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>

11 years agoInput: serio - fix protocol number for TouchIT213
Dmitry Torokhov [Sat, 7 Mar 2009 21:39:22 +0000]
Input: serio - fix protocol number for TouchIT213

Protocol 0x37 has been reserved for iNexio devices and Sahara
was supposed to get 0x38.

Reported-by: Claudio Nieder <private@claudio.ch>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

11 years agop54: fix race condition in memory management
Christian Lamparter [Thu, 5 Mar 2009 23:53:59 +0000]
p54: fix race condition in memory management

This patch fixes a number of race conditions in the driver.
Up until now, "entry" pointer was initialized before acquiring the right lock.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

11 years agocfg80211: test before subtraction on unsigned
Roel Kluin [Tue, 3 Mar 2009 21:55:21 +0000]
cfg80211: test before subtraction on unsigned

freq_diff is unsigned, so test before subtraction

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

11 years ago[IA64] fix PCI DMA flag propagation on SN (Altix) with PICs
Jeremy Higdon [Wed, 4 Mar 2009 20:09:46 +0000]
[IA64] fix PCI DMA flag propagation on SN (Altix) with PICs

We recently discovered a problem with passing of DMA attributes on SN
systems with the older PIC chips.

[akpm@linux-foundation.org: coding-style fixes]

Signed-off-by: Jeremy Higdon <jeremy@sgi.com>
Cc: <habeck@sgi.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>

11 years agox86, pebs: correct qualifier passed to ds_write_config() from ds_request_pebs()
Markus Metzger [Thu, 5 Mar 2009 07:57:21 +0000]
x86, pebs: correct qualifier passed to ds_write_config() from ds_request_pebs()

ds_write_config() can write the BTS as well as the PEBS part of
the DS config. ds_request_pebs() passes the wrong qualifier, which
results in the wrong configuration to be written.

Reported-by: Stephane Eranian <eranian@googlemail.com>
Signed-off-by: Markus Metzger <markus.t.metzger@intel.com>
LKML-Reference: <20090305085721.A22550@sedona.ch.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agox86, bts: remove bad warning
Markus Metzger [Thu, 5 Mar 2009 07:49:54 +0000]
x86, bts: remove bad warning

In case a ptraced task is reaped (while the tracer is still attached),
ds_exit_thread() is called before ptrace_exit(). The latter will
release the bts_tracer and remove the thread's ds_ctx.
The former will WARN() if the context is not NULL.

Oleg Nesterov submitted patches that move ptrace_exit() before
exit_thread() and thus reverse the order of the above calls.

Remove the bad warning. I will add it again when Oleg's changes are in.

Signed-off-by: Markus Metzger <markus.t.metzger@intel.com>
LKML-Reference: <20090305084954.A22000@sedona.ch.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>