6 years agoloopdev: fix a deadlock
Guo Chao [Thu, 21 Feb 2013 23:16:45 +0000]
loopdev: fix a deadlock

commit 5370019dc2d2c2ff90e95d181468071362934f3a upstream.

bd_mutex and lo_ctl_mutex can be held in different order.

Path #1:

blkdev_open
 blkdev_get
  __blkdev_get (hold bd_mutex)
   lo_open (hold lo_ctl_mutex)

Path #2:

blkdev_ioctl
 lo_ioctl (hold lo_ctl_mutex)
  lo_set_capacity (hold bd_mutex)

Lockdep does not report it, because path #2 actually holds a subclass of
lo_ctl_mutex.  This subclass seems creep into the code by mistake.  The
patch author actually just mentioned it in the changelog, see commit
f028f3b2 ("loop: fix circular locking in loop_clr_fd()"), also see:

http://marc.info/?l=linux-kernel&m=123806169129727&w=2

Path #2 hold bd_mutex to call bd_set_size(), I've protected it
with i_mutex in a previous patch, so drop bd_mutex at this site.

Signed-off-by: Guo Chao <yan@linux.vnet.ibm.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Guo Chao <yan@linux.vnet.ibm.com>
Cc: M. Hindess <hindessm@uk.ibm.com>
Cc: Nikanth Karthikesan <knikanth@suse.de>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Acked-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoblock: use i_size_write() in bd_set_size()
Guo Chao [Thu, 21 Feb 2013 23:16:42 +0000]
block: use i_size_write() in bd_set_size()

commit d646a02a9d44d1421f273ae3923d97b47b918176 upstream.

blkdev_ioctl(GETBLKSIZE) uses i_size_read() to read size of block device.
If we update block size directly, reader may see intermediate result in
some machines and configurations.  Use i_size_write() instead.

Signed-off-by: Guo Chao <yan@linux.vnet.ibm.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Guo Chao <yan@linux.vnet.ibm.com>
Cc: M. Hindess <hindessm@uk.ibm.com>
Cc: Nikanth Karthikesan <knikanth@suse.de>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Acked-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agohwmon: (sht15) Fix memory leak if regulator_enable() fails
Ben Hutchings [Sat, 16 Mar 2013 13:32:16 +0000]
hwmon: (sht15) Fix memory leak if regulator_enable() fails

Commit 3e78080f8148 ('hwmon: (sht15) Check return value of
regulator_enable()') depends on the use of devm_kmalloc() for automatic
resource cleanup in the failure cases, which was introduced in 3.7.  In
older stable branches, explicit cleanup is needed.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agodrm/i915: EBUSY status handling added to i915_gem_fault().
Dmitry Rogozhkin [Wed, 3 Oct 2012 14:15:26 +0000]
drm/i915: EBUSY status handling added to i915_gem_fault().

commit e79e0fe380847493266fba557217e2773c61bd1b upstream.

Subsequent threads returning EBUSY from vm_insert_pfn() was not handled
correctly. As a result concurrent access from new threads to
mmapped data caused SIGBUS.

Note that this fixes i-g-t/tests/gem_threaded_tiled_access.

Tested-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoatmel_lcdfb: fix 16-bpp modes on older SOCs
Johan Hovold [Tue, 5 Feb 2013 13:35:11 +0000]
atmel_lcdfb: fix 16-bpp modes on older SOCs

commit a79eac7165ed62114e6ca197195aa5060a54f137 upstream.

Fix regression introduced by commit 787f9fd23283 ("atmel_lcdfb: support
16bit BGR:565 mode, remove unsupported 15bit modes") which broke 16-bpp
modes for older SOCs which use IBGR:555 (msb is intensity) rather
than BGR:565.

Use SOC-type to determine the pixel layout.

Tested on at91sam9263 and at91sam9g45.

Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agobtrfs: use rcu_barrier() to wait for bdev puts at unmount
Eric Sandeen [Sat, 9 Mar 2013 15:18:39 +0000]
btrfs: use rcu_barrier() to wait for bdev puts at unmount

commit bc178622d40d87e75abc131007342429c9b03351 upstream.

Doing this would reliably fail with -EBUSY for me:

# mount /dev/sdb2 /mnt/scratch; umount /mnt/scratch; mkfs.btrfs -f /dev/sdb2
...
unable to open /dev/sdb2: Device or resource busy

because mkfs.btrfs tries to open the device O_EXCL, and somebody still has it.

Using systemtap to track bdev gets & puts shows a kworker thread doing a
blkdev put after mkfs attempts a get; this is left over from the unmount
path:

btrfs_close_devices
__btrfs_close_devices
call_rcu(&device->rcu, free_device);
free_device
INIT_WORK(&device->rcu_work, __free_device);
schedule_work(&device->rcu_work);

so unmount might complete before __free_device fires & does its blkdev_put.

Adding an rcu_barrier() to btrfs_close_devices() causes unmount to wait
until all blkdev_put()s are done, and the device is truly free once
unmount completes.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agos390/mm: fix flush_tlb_kernel_range()
Heiko Carstens [Mon, 4 Mar 2013 13:14:11 +0000]
s390/mm: fix flush_tlb_kernel_range()

commit f6a70a07079518280022286a1dceb797d12e1edf upstream.

Our flush_tlb_kernel_range() implementation calls __tlb_flush_mm() with
&init_mm as argument. __tlb_flush_mm() however will only flush tlbs
for the passed in mm if its mm_cpumask is not empty.

For the init_mm however its mm_cpumask has never any bits set. Which in
turn means that our flush_tlb_kernel_range() implementation doesn't
work at all.

This can be easily verified with a vmalloc/vfree loop which allocates
a page, writes to it and then frees the page again. A crash will follow
almost instantly.

To fix this remove the cpumask_empty() check in __tlb_flush_mm() since
there shouldn't be too many mms with a zero mm_cpumask, besides the
init_mm of course.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agos390: critical section cleanup vs. machine checks
Martin Schwidefsky [Thu, 28 Feb 2013 15:28:41 +0000]
s390: critical section cleanup vs. machine checks

commit 6551fbdfd8b85d1ab5822ac98abb4fb449bcfae0 upstream.

The current machine check code uses the registers stored by the machine
in the lowcore at __LC_GPREGS_SAVE_AREA as the registers of the interrupted
context. The registers 0-7 of a user process can get clobbered if a machine
checks interrupts the execution of a critical section in entry[64].S.

The reason is that the critical section cleanup code may need to modify
the PSW and the registers for the previous context to get to the end of a
critical section. If registers 0-7 have to be replaced the relevant copy
will be in the registers, which invalidates the copy in the lowcore. The
machine check handler needs to explicitly store registers 0-7 to the stack.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoperf,x86: fix link failure for non-Intel configs
David Rientjes [Sun, 17 Mar 2013 22:49:10 +0000]
perf,x86: fix link failure for non-Intel configs

commit 6c4d3bc99b3341067775efd4d9d13cc8e655fd7c upstream.

Commit 1d9d8639c063 ("perf,x86: fix kernel crash with PEBS/BTS after
suspend/resume") introduces a link failure since
perf_restore_debug_store() is only defined for CONFIG_CPU_SUP_INTEL:

arch/x86/power/built-in.o: In function `restore_processor_state':
(.text+0x45c): undefined reference to `perf_restore_debug_store'

Fix it by defining the dummy function appropriately.

Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoperf,x86: fix wrmsr_on_cpu() warning on suspend/resume
Linus Torvalds [Sun, 17 Mar 2013 22:44:43 +0000]
perf,x86: fix wrmsr_on_cpu() warning on suspend/resume

commit 2a6e06b2aed6995af401dcd4feb5e79a0c7ea554 upstream.

Commit 1d9d8639c063 ("perf,x86: fix kernel crash with PEBS/BTS after
suspend/resume") fixed a crash when doing PEBS performance profiling
after resuming, but in using init_debug_store_on_cpu() to restore the
DS_AREA mtrr it also resulted in a new WARN_ON() triggering.

init_debug_store_on_cpu() uses "wrmsr_on_cpu()", which in turn uses CPU
cross-calls to do the MSR update.  Which is not really valid at the
early resume stage, and the warning is quite reasonable.  Now, it all
happens to _work_, for the simple reason that smp_call_function_single()
ends up just doing the call directly on the CPU when the CPU number
matches, but we really should just do the wrmsr() directly instead.

This duplicates the wrmsr() logic, but hopefully we can just remove the
wrmsr_on_cpu() version eventually.

Reported-and-tested-by: Parag Warudkar <parag.lkml@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoselinux: use GFP_ATOMIC under spin_lock
Dan Carpenter [Sat, 16 Mar 2013 09:48:11 +0000]
selinux: use GFP_ATOMIC under spin_lock

commit 4502403dcf8f5c76abd4dbab8726c8e4ecb5cd34 upstream.

The call tree here is:

sk_clone_lock()              <- takes bh_lock_sock(newsk);
xfrm_sk_clone_policy()
__xfrm_sk_clone_policy()
clone_policy()               <- uses GFP_ATOMIC for allocations
security_xfrm_policy_clone()
security_ops->xfrm_policy_clone_security()
selinux_xfrm_policy_clone()

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agopowerpc: Fix cputable entry for 970MP rev 1.0
Benjamin Herrenschmidt [Tue, 12 Mar 2013 22:55:02 +0000]
powerpc: Fix cputable entry for 970MP rev 1.0

commit d63ac5f6cf31c8a83170a9509b350c1489a7262b upstream.

Commit 44ae3ab3358e962039c36ad4ae461ae9fb29596c forgot to update
the entry for the 970MP rev 1.0 processor when moving some CPU
features bits to the MMU feature bit mask. This breaks booting
on some rare G5 models using that chip revision.

Reported-by: Phileas Fogg <phileas-fogg@mail.ru>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agopowerpc: Fix STAB initialization
Benjamin Herrenschmidt [Tue, 12 Mar 2013 22:49:06 +0000]
powerpc: Fix STAB initialization

commit 13938117a57f88a22f0df9722a5db7271fda85cd upstream.

Commit f5339277eb8d3aed37f12a27988366f68ab68930 accidentally removed
more than just iSeries bits and took out the call to stab_initialize()
thus breaking support for POWER3 processors.

Put it back. (Yes, nobody noticed until now ...)

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agow1: fix oops when w1_search is called from netlink connector
Marcin Jurkowski [Sat, 2 Mar 2013 13:50:15 +0000]
w1: fix oops when w1_search is called from netlink connector

commit 9d1817cab2f030f6af360e961cc69bb1da8ad765 upstream.

On Sat, Mar 02, 2013 at 10:45:10AM +0100, Sven Geggus wrote:
> This is the bad commit I found doing git bisect:
04f482faf50535229a5a5c8d629cf963899f857c is the first bad commit
> commit 04f482faf50535229a5a5c8d629cf963899f857c
> Author: Patrick McHardy <kaber@trash.net>
> Date:   Mon Mar 28 08:39:36 2011 +0000

Good job. I was too lazy to bisect for bad commit;)

Reading the code I found problematic kthread_should_stop call from netlink
connector which causes the oops. After applying a patch, I've been testing
owfs+w1 setup for nearly two days and it seems to work very reliable (no
hangs, no memleaks etc).
More detailed description and possible fix is given below:

Function w1_search can be called from either kthread or netlink callback.
While the former works fine, the latter causes oops due to kthread_should_stop
invocation.

This patch adds a check if w1_search is serving netlink command, skipping
kthread_should_stop invocation if so.

Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Cc: Josh Boyer <jwboyer@gmail.com>
Tested-by: Sven Geggus <lists@fuchsschwanzdomain.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agohwmon: (lineage-pem) Add missing terminating entry for pem_[input|fan]_attributes
Axel Lin [Thu, 14 Mar 2013 08:27:18 +0000]
hwmon: (lineage-pem) Add missing terminating entry for pem_[input|fan]_attributes

commit df069079c153d22adf6c28dcc0b1cf62bba75167 upstream.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agohwmon: (pmbus/ltc2978) Fix temperature reporting
Guenter Roeck [Thu, 21 Feb 2013 18:27:54 +0000]
hwmon: (pmbus/ltc2978) Fix temperature reporting

commit 8c958c703ef8804093437959221951eaf0e1e664 upstream.

On LTC2978, only READ_TEMPERATURE is supported. It reports
the internal junction temperature. This register is unpaged.

On LTC3880, READ_TEMPERATURE and READ_TEMPERATURE2 are supported.
READ_TEMPERATURE is paged and reports external temperatures.
READ_TEMPERATURE2 is unpaged and reports the internal junction
temperature.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoALSA: seq: Fix missing error handling in snd_seq_timer_open()
Takashi Iwai [Fri, 8 Mar 2013 17:11:17 +0000]
ALSA: seq: Fix missing error handling in snd_seq_timer_open()

commit 66efdc71d95887b652a742a5dae51fa834d71465 upstream.

snd_seq_timer_open() didn't catch the whole error path but let through
if the timer id is a slave.  This may lead to Oops by accessing the
uninitialized pointer.

 BUG: unable to handle kernel NULL pointer dereference at 00000000000002ae
 IP: [<ffffffff819b3477>] snd_seq_timer_open+0xe7/0x130
 PGD 785cd067 PUD 76964067 PMD 0
 Oops: 0002 [#4] SMP
 CPU 0
 Pid: 4288, comm: trinity-child7 Tainted: G      D W 3.9.0-rc1+ #100 Bochs Bochs
 RIP: 0010:[<ffffffff819b3477>]  [<ffffffff819b3477>] snd_seq_timer_open+0xe7/0x130
 RSP: 0018:ffff88006ece7d38  EFLAGS: 00010246
 RAX: 0000000000000286 RBX: ffff88007851b400 RCX: 0000000000000000
 RDX: 000000000000ffff RSI: ffff88006ece7d58 RDI: ffff88006ece7d38
 RBP: ffff88006ece7d98 R08: 000000000000000a R09: 000000000000fffe
 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
 R13: ffff8800792c5400 R14: 0000000000e8f000 R15: 0000000000000007
 FS:  00007f7aaa650700(0000) GS:ffff88007f800000(0000) GS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00000000000002ae CR3: 000000006efec000 CR4: 00000000000006f0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
 Process trinity-child7 (pid: 4288, threadinfo ffff88006ece6000, task ffff880076a8a290)
 Stack:
  0000000000000286 ffffffff828f2be0 ffff88006ece7d58 ffffffff810f354d
  65636e6575716573 2065756575712072 ffff8800792c0030 0000000000000000
  ffff88006ece7d98 ffff8800792c5400 ffff88007851b400 ffff8800792c5520
 Call Trace:
  [<ffffffff810f354d>] ? trace_hardirqs_on+0xd/0x10
  [<ffffffff819b17e9>] snd_seq_queue_timer_open+0x29/0x70
  [<ffffffff819ae01a>] snd_seq_ioctl_set_queue_timer+0xda/0x120
  [<ffffffff819acb9b>] snd_seq_do_ioctl+0x9b/0xd0
  [<ffffffff819acbe0>] snd_seq_ioctl+0x10/0x20
  [<ffffffff811b9542>] do_vfs_ioctl+0x522/0x570
  [<ffffffff8130a4b3>] ? file_has_perm+0x83/0xa0
  [<ffffffff810f354d>] ? trace_hardirqs_on+0xd/0x10
  [<ffffffff811b95ed>] sys_ioctl+0x5d/0xa0
  [<ffffffff813663fe>] ? trace_hardirqs_on_thunk+0x3a/0x3f
  [<ffffffff81faed69>] system_call_fastpath+0x16/0x1b

Reported-and-tested-by: Tommi Rantala <tt.rantala@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoperf,x86: fix kernel crash with PEBS/BTS after suspend/resume
Stephane Eranian [Fri, 15 Mar 2013 13:26:07 +0000]
perf,x86: fix kernel crash with PEBS/BTS after suspend/resume

commit 1d9d8639c063caf6efc2447f5f26aa637f844ff6 upstream.

This patch fixes a kernel crash when using precise sampling (PEBS)
after a suspend/resume. Turns out the CPU notifier code is not invoked
on CPU0 (BP). Therefore, the DS_AREA (used by PEBS) is not restored properly
by the kernel and keeps it power-on/resume value of 0 causing any PEBS
measurement to crash when running on CPU0.

The workaround is to add a hook in the actual resume code to restore
the DS Area MSR value. It is invoked for all CPUS. So for all but CPU0,
the DS_AREA will be restored twice but this is harmless.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoTTY: do not reset master's packet mode
Jiri Slaby [Tue, 15 Jan 2013 22:26:22 +0000]
TTY: do not reset master's packet mode

commit b81273a132177edd806476b953f6afeb17b786d5 upstream.

Now that login from util-linux is forced to drop all references to a
TTY which it wants to hangup (to reach reference count 1) we are
seeing issues with telnet. When login closes its last reference to the
slave PTY, it also resets packet mode on the *master* side. And we
have a race here.

What telnet does is fork+exec of `login'. Then there are two
scenarios:
* `login' closes the slave TTY and resets thus master's packet mode,
  but even now telnet properly sets the mode, or
* `telnetd' sets packet mode on the master, `login' closes the slave
  TTY and resets master's packet mode.

The former case is OK. However the latter happens in much more cases,
by the order of magnitude to be precise. So when one tries to login to
such a messed telnet setup, they see the following:
inux login:
            ogin incorrect

Note the missing first letters -- telnet thinks it is still in the
packet mode, so when it receives "linux login" from `login', it
considers "l" as the type of the packet and strips it.

SuS does not mention how the implementation should behave. Both BSDs I
checked (Free and Net) do not reset the flag upon the last close.

By this I am resurrecting an old bug, see References. We are hitting
it regularly now, i.e. with updated util-linux, ergo login.

Here, I am changing a behavior introduced back in 2.1 times. It would
better have a long time testing before goes upstream.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: Bryan Mason <bmason@redhat.com>
References: https://lkml.org/lkml/2009/11/11/223
References: https://bugzilla.redhat.com/show_bug.cgi?id=504703
References: https://bugzilla.novell.com/show_bug.cgi?id=797042
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agotty: serial: fix typo "ARCH_S5P6450"
Paul Bolle [Sat, 9 Mar 2013 22:16:44 +0000]
tty: serial: fix typo "ARCH_S5P6450"

commit 827aa0d36d486f359808c8fb931cf7a71011a09d upstream.

This could have been either ARCH_S5P64X0 or CPU_S5P6450. Looking at
commit 2555e663b367b8d555e76023f4de3f6338c28d6c ("ARM: S5P64X0: Add UART
serial support for S5P6450") - which added this typo - makes clear this
should be CPU_S5P6450.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoserial: 8250_pci: add support for another kind of NetMos Technology PCI 9835 Multi...
Wang YanQing [Fri, 1 Mar 2013 03:47:20 +0000]
serial: 8250_pci: add support for another kind of NetMos Technology PCI 9835 Multi-I/O Controller

commit 8d2f8cd424ca0b99001f3ff4f5db87c4e525f366 upstream.

01:08.0 Communication controller: NetMos Technology PCI 9835 Multi-I/O Controller (rev 01)
Subsystem: Device [1000:0012]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 20
Region 0: I/O ports at e050 [size=8]
Region 1: I/O ports at e040 [size=8]
Region 2: I/O ports at e030 [size=8]
Region 3: I/O ports at e020 [size=8]
Region 4: I/O ports at e010 [size=8]
Region 5: I/O ports at e000 [size=16]

Signed-off-by: Wang YanQing <udknight@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoext3: Fix format string issues
Lars-Peter Clausen [Sat, 9 Mar 2013 14:28:44 +0000]
ext3: Fix format string issues

commit 8d0c2d10dd72c5292eda7a06231056a4c972e4cc upstream.

ext3_msg() takes the printk prefix as the second parameter and the
format string as the third parameter. Two callers of ext3_msg omit the
prefix and pass the format string as the second parameter and the first
parameter to the format string as the third parameter. In both cases
this string comes from an arbitrary source. Which means the string may
contain format string characters, which will
lead to undefined and potentially harmful behavior.

The issue was introduced in commit 4cf46b67eb("ext3: Unify log messages
in ext3") and is fixed by this patch.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agosignal: always clear sa_restorer on execve
Kees Cook [Wed, 13 Mar 2013 21:59:33 +0000]
signal: always clear sa_restorer on execve

commit 2ca39528c01a933f6689cd6505ce65bd6d68a530 upstream.

When the new signal handlers are set up, the location of sa_restorer is
not cleared, leaking a parent process's address space location to
children.  This allows for a potential bypass of the parent's ASLR by
examining the sa_restorer value returned when calling sigaction().

Based on what should be considered "secret" about addresses, it only
matters across the exec not the fork (since the VMAs haven't changed
until the exec).  But since exec sets SIG_DFL and keeps sa_restorer,
this is where it should be fixed.

Given the few uses of sa_restorer, a "set" function was not written
since this would be the only use.  Instead, we use
__ARCH_HAS_SA_RESTORER, as already done in other places.

Example of the leak before applying this patch:

  $ cat /proc/$$/maps
  ...
  7fb9f3083000-7fb9f3238000 r-xp 00000000 fd:01 404469 .../libc-2.15.so
  ...
  $ ./leak
  ...
  7f278bc74000-7f278be29000 r-xp 00000000 fd:01 404469 .../libc-2.15.so
  ...
  1 0 (nil) 0x7fb9f30b94a0
  2 4000000 (nil) 0x7f278bcaa4a0
  3 4000000 (nil) 0x7f278bcaa4a0
  4 0 (nil) 0x7fb9f30b94a0
  ...

[akpm@linux-foundation.org: use SA_RESTORER for backportability]
Signed-off-by: Kees Cook <keescook@chromium.org>
Reported-by: Emese Revfy <re.emese@gmail.com>
Cc: Emese Revfy <re.emese@gmail.com>
Cc: PaX Team <pageexec@freemail.hu>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Serge Hallyn <serge.hallyn@canonical.com>
Cc: Julien Tinnes <jln@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agostaging: vt6656: Fix oops on resume from suspend.
Malcolm Priestley [Mon, 18 Feb 2013 19:54:18 +0000]
staging: vt6656: Fix oops on resume from suspend.

commit 6987a6dabfc40222ef767f67b57212fe3a0225fb upstream.

Remove usb_put_dev from vt6656_suspend and usb_get_dev
from vt6566_resume.

These are not normally in suspend/resume functions.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoUSB: EHCI: don't check DMA values in QH overlays
Alan Stern [Fri, 1 Mar 2013 15:51:15 +0000]
USB: EHCI: don't check DMA values in QH overlays

commit feca7746d5d9e84b105a613b7f3b6ad00d327372 upstream.

This patch (as1661) fixes a rather obscure bug in ehci-hcd.  In a
couple of places, the driver compares the DMA address stored in a QH's
overlay region with the address of a particular qTD, in order to see
whether that qTD is the one currently being processed by the hardware.
(If it is then the status in the QH's overlay region is more
up-to-date than the status in the qTD, and if it isn't then the
overlay's value needs to be adjusted when the QH is added back to the
active schedule.)

However, DMA address in the overlay region isn't always valid.  It
sometimes will contain a stale value, which may happen by coincidence
to be equal to a qTD's DMA address.  Instead of checking the DMA
address, we should check whether the overlay region is active and
valid.  The patch tests the ACTIVE bit in the overlay, and clears this
bit when the overlay becomes invalid (which happens when the
currently-executing URB is unlinked).

This is the second part of a fix for the regression reported at:

https://bugs.launchpad.net/bugs/1088733

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Joseph Salisbury <joseph.salisbury@canonical.com>
Reported-and-tested-by: Stephen Thirlwall <sdt@dr.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoUSB: storage: fix Huawei mode switching regression
Bjørn Mork [Mon, 4 Mar 2013 13:19:21 +0000]
USB: storage: fix Huawei mode switching regression

commit ab4b71644a26d1ab92b987b2fd30e17c25e89f85 upstream.

This reverts commit 200e0d99 ("USB: storage: optimize to match the
Huawei USB storage devices and support new switch command" and the
followup bugfix commit cd060956 ("USB: storage: properly handle
the endian issues of idProduct").

The commit effectively added a large number of Huawei devices to
the deprecated usb-storage mode switching logic.  Many of these
devices have been in use and supported by the userspace
usb_modeswitch utility for years.  Forcing the switching inside
the kernel causes a number of regressions as a result of ignoring
existing onfigurations, and also completely takes away the ability
to configure mode switching per device/system/user.

Known regressions caused by this:
 - Some of the devices support multiple modes, using different
  switching commands.  There are existing configurations taking
  advantage of this.

 - There is a real use case for disabling mode switching and
  instead mounting the exposed storage device. This becomes
  impossible with switching logic inside the usb-storage driver.

 - At least on device fail as a result of the usb-storage switching
  command, becoming completely unswitchable. This is possibly a
  firmware bug, but still a regression because the device work as
  expected using usb_modeswitch defaults.

In-kernel mode switching was deprecated years ago with the
development of the more user friendly userspace alternatives. The
existing list of devices in usb-storage was only kept to prevent
breaking already working systems.  The long term plan is to remove
the list, not to add to it. Ref:
http://permalink.gmane.org/gmane.linux.usb.general/28543

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Cc: <fangxiaozhi@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agousb: serial: Add Rigblaster Advantage to device table
Steve Conklin [Thu, 7 Mar 2013 23:19:33 +0000]
usb: serial: Add Rigblaster Advantage to device table

commit a57e82a18779ab8a5e5a1f5841cef937cf578913 upstream.

The Rigblaster Advantage is an amateur radio interface sold by West Mountain
Radio. It contains a cp210x serial interface but the device ID is not in
the driver.

Signed-off-by: Steve Conklin <sconklin@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoUSB: added support for Cinterion's products AH6 and PLS8
Christian Schmiedl [Wed, 6 Mar 2013 16:08:50 +0000]
USB: added support for Cinterion's products AH6 and PLS8

commit 1941138e1c024ecb5bd797d414928d3eb94d8662 upstream.

add support for Cinterion's products AH6 and PLS8 by adding Product IDs
and USB_DEVICE tuples.

Signed-off-by: Christian Schmiedl <christian.schmiedl@gemalto.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agousb: cp210x new Vendor/Device IDs
Matwey V. Kornilov [Sat, 9 Mar 2013 09:57:32 +0000]
usb: cp210x new Vendor/Device IDs

commit be3101c23394af59694c8a2aae6d07f5da62fea5 upstream.

This patch adds support for the Lake Shore Cryotronics devices to
the CP210x driver.

These lines are ported from cp210x driver distributed by Lake Shore web site:
   http://www.lakeshore.com/Documents/Lake%20Shore%20cp210x-3.0.0.tar.gz
and licensed under the terms of GPLv2.

Moreover, I've tested this changes with Lake Shore 335 in my labs.

Signed-off-by: Matwey V. Kornilov <matwey@sai.msu.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoUSB: cdc-wdm: fix buffer overflow
Oliver Neukum [Tue, 12 Mar 2013 13:52:42 +0000]
USB: cdc-wdm: fix buffer overflow

commit c0f5ecee4e741667b2493c742b60b6218d40b3aa upstream.

The buffer for responses must not overflow.
If this would happen, set a flag, drop the data and return
an error after user space has read all remaining data.

Signed-off-by: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoUSB: option: add Huawei E5331
Bjørn Mork [Wed, 27 Feb 2013 14:52:56 +0000]
USB: option: add Huawei E5331

commit daec90e7382cbd0e73eb6861109b3da91e5ab1f3 upstream.

Another device using CDC ACM with vendor specific protocol to mark
serial functions.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agovirtio: rng: disallow multiple device registrations, fixes crashes
Amit Shah [Fri, 8 Mar 2013 00:30:18 +0000]
virtio: rng: disallow multiple device registrations, fixes crashes

commit e84e7a56a3aa2963db506299e29a5f3f09377f9b upstream.

The code currently only supports one virtio-rng device at a time.
Invoking guests with multiple devices causes the guest to blow up.

Check if we've already registered and initialised the driver.  Also
cleanup in case of registration errors or hot-unplug so that a new
device can be used.

Reported-by: Peter Krempa <pkrempa@redhat.com>
Reported-by: <yunzheng@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoxen/pciback: Don't disable a PCI device that is already disabled.
Konrad Rzeszutek Wilk [Tue, 5 Mar 2013 18:14:19 +0000]
xen/pciback: Don't disable a PCI device that is already disabled.

commit bdc5c1812cea6efe1aaefb3131fcba28cd0b2b68 upstream.

While shuting down a HVM guest with pci devices passed through we
get this:

pciback 0000:04:00.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100002)
------------[ cut here ]------------
WARNING: at drivers/pci/pci.c:1397 pci_disable_device+0x88/0xa0()
Hardware name: MS-7640
Device pciback
disabling already-disabled device
Modules linked in:
Pid: 53, comm: xenwatch Not tainted 3.9.0-rc1-20130304a+ #1
Call Trace:
 [<ffffffff8106994a>] warn_slowpath_common+0x7a/0xc0
 [<ffffffff81069a31>] warn_slowpath_fmt+0x41/0x50
 [<ffffffff813cf288>] pci_disable_device+0x88/0xa0
 [<ffffffff814554a7>] xen_pcibk_reset_device+0x37/0xd0
 [<ffffffff81454b6f>] ? pcistub_put_pci_dev+0x6f/0x120
 [<ffffffff81454b8d>] pcistub_put_pci_dev+0x8d/0x120
 [<ffffffff814582a9>] __xen_pcibk_release_devices+0x59/0xa0

This fixes the bug.

Reported-and-Tested-by: Sander Eikelenboom <linux@eikelenboom.it>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoqcaux: add Franklin U600
Dan Williams [Tue, 19 Feb 2013 15:47:09 +0000]
qcaux: add Franklin U600

commit 2d90e63603ac235aecd7d20e234616e0682c8b1f upstream.

4 ports; AT/PPP is standard CDC-ACM.  The other three (added by this
patch) are QCDM/DIAG, possibly GPS, and unknown.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoLinux 3.4.36
Greg Kroah-Hartman [Thu, 14 Mar 2013 18:30:25 +0000]
Linux 3.4.36

6 years agoUSB: Fix connected device switch to Inactive state.
Sarah Sharp [Wed, 13 Mar 2013 17:59:21 +0000]
USB: Fix connected device switch to Inactive state.

[This is upstream commit d3b9d7a9051d7024a93c76a84b2f84b3b66ad6d5.
It needs to be backported to kernels as old as 3.2, because it fixes the
buggy commit 9dbcaec830cd97f44a0b91b315844e0d7144746b "USB: Handle warm
reset failure on empty port."]

A USB 3.0 device can transition to the Inactive state if a U1 or U2 exit
transition fails.  The current code in hub_events simply issues a warm
reset, but does not call any pre-reset or post-reset driver methods (or
unbind/rebind drivers without them).  Therefore the drivers won't know
their device has just been reset.

hub_events should instead call usb_reset_device.  This means
hub_port_reset now needs to figure out whether it should issue a warm
reset or a hot reset.

Remove the FIXME note about needing disconnect() for a NOTATTACHED
device.  This patch fixes that.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoRevert "ALSA: hda - hdmi: Make jacks phantom, if they're not detectable"
Greg Kroah-Hartman [Tue, 12 Mar 2013 22:18:13 +0000]
Revert "ALSA: hda - hdmi: Make jacks phantom, if they're not detectable"

This reverts commit 30efd8debd1ef30be342d374f01e993509f5b76b upstream
(dd54ec4067a23236736afecbda120030d7ce8fe9 in this tree) as it is not
needed for the 3.4-stable tree.

Cc: David Henningsson <david.henningsson@canonical.com>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoUSB: Rip out recursive call on warm port reset.
Sarah Sharp [Fri, 8 Mar 2013 00:24:24 +0000]
USB: Rip out recursive call on warm port reset.

[This is upstream commit 24a6078754f28528bc91e7e7b3e6ae86bd936d8.
It needs to be backported to kernels as old as 3.2, because it fixes the
buggy commit 9dbcaec830cd97f44a0b91b315844e0d7144746b "USB: Handle warm
reset failure on empty port."]

When a hot reset fails on a USB 3.0 port, the current port reset code
recursively calls hub_port_reset inside hub_port_wait_reset.  This isn't
ideal, since we should avoid recursive calls in the kernel, and it also
doesn't allow us to issue multiple warm resets on reset failures.

Rip out the recursive call.  Instead, add code to hub_port_reset to
issue a warm reset if the hot reset fails, and try multiple warm resets
before giving up on the port.

In hub_port_wait_reset, remove the recursive call and re-indent.  The
code is basically the same, except:

1. It bails out early if the port has transitioned to Inactive or
Compliance Mode after the reset completed.

2. It doesn't consider a connect status change to be a failed reset.  If
multiple warm resets needed to be issued, the connect status may have
changed, so we need to ignore that and look at the port link state
instead.  hub_port_reset will now do that.

3. It unconditionally sets udev->speed on all types of successful
resets.  The old recursive code would set the port speed when the second
hub_port_reset returned.

The old code did not handle connected devices needing a warm reset well.
There were only two situations that the old code handled correctly: an
empty port needing a warm reset, and a hot reset that migrated to a warm
reset.

When an empty port needed a warm reset, hub_port_reset was called with
the warm variable set.  The code in hub_port_finish_reset would skip
telling the USB core and the xHC host that the device was reset, because
otherwise that would result in a NULL pointer dereference.

When a USB 3.0 device reset migrated to a warm reset, the recursive call
made the call stack look like this:

hub_port_reset(warm = false)
        hub_wait_port_reset(warm = false)
                hub_port_reset(warm = true)
                        hub_wait_port_reset(warm = true)
                        hub_port_finish_reset(warm = true)
                        (return up the call stack to the first wait)

        hub_port_finish_reset(warm = false)

The old code didn't want to notify the USB core or the xHC host of device reset
twice, so it only did it in the second call to hub_port_finish_reset,
when warm was set to false.  This was necessary because
before patch two ("USB: Ignore xHCI Reset Device status."), the USB core
would pay attention to the xHC Reset Device command error status, and
the second call would always fail.

Now that we no longer have the recursive call, and warm can change from
false to true in hub_port_reset, we need to have hub_port_finish_reset
unconditionally notify the USB core and the xHC of the device reset.

In hub_port_finish_reset, unconditionally clear the connect status
change (CSC) bit for USB 3.0 hubs when the port reset is done.  If we
had to issue multiple warm resets for a device, that bit may have been
set if the device went into SS.Inactive and then was successfully warm
reset.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoUSB: Prepare for refactoring by adding extra udev checks.
Sarah Sharp [Fri, 8 Mar 2013 00:24:22 +0000]
USB: Prepare for refactoring by adding extra udev checks.

[This is upstream commit 2d4fa940f99663c82ba55b2244638833b388e4e2.
It needs to be backported to kernels as old as 3.2, because it fixes the
buggy commit 9dbcaec830cd97f44a0b91b315844e0d7144746b "USB: Handle warm
reset failure on empty port."]

The next patch will refactor the hub port code to rip out the recursive
call to hub_port_reset on a failed hot reset.  In preparation for that,
make sure all code paths can deal with being called with a NULL udev.
The usb_device will not be valid if warm reset was issued because a port
transitioned to the Inactive or Compliance Mode on a device connect.

This patch should have no effect on current behavior.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoUSB: Don't use EHCI port sempahore for USB 3.0 hubs.
Sarah Sharp [Fri, 8 Mar 2013 00:24:19 +0000]
USB: Don't use EHCI port sempahore for USB 3.0 hubs.

[This is upstream commit 0fe51aa5eee51db7c7ecd201d42a977ad79c58b6.
It needs to be backported to kernels as old as 3.2, because it fixes the
buggy commit 9dbcaec830cd97f44a0b91b315844e0d7144746b "USB: Handle warm
reset failure on empty port."]

The EHCI host controller needs to prevent EHCI initialization when the
UHCI or OHCI companion controller is in the middle of a port reset.  It
uses ehci_cf_port_reset_rwsem to do this.  USB 3.0 hubs can't be under
an EHCI host controller, so it makes no sense to down the semaphore for
USB 3.0 hubs.  It also makes the warm port reset code more complex.

Don't down ehci_cf_port_reset_rwsem for USB 3.0 hubs.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agodmi_scan: fix missing check for _DMI_ signature in smbios_present()
Ben Hutchings [Fri, 8 Mar 2013 20:43:32 +0000]
dmi_scan: fix missing check for _DMI_ signature in smbios_present()

commit a40e7cf8f06b4e322ba902e4e9f6a6b0c2daa907 upstream.

Commit 9f9c9cbb6057 ("drivers/firmware/dmi_scan.c: fetch dmi version
from SMBIOS if it exists") hoisted the check for "_DMI_" into
dmi_scan_machine(), which means that we don't bother to check for
"_DMI_" at offset 16 in an SMBIOS entry.  smbios_present() may also call
dmi_present() for an address where we found "_SM_", if it failed further
validation.

Check for "_DMI_" in smbios_present() before calling dmi_present().

[akpm@linux-foundation.org: fix build]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Reported-by: Tim McGrath <tmhikaru@gmail.com>
Tested-by: Tim Mcgrath <tmhikaru@gmail.com>
Cc: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoftrace: Update the kconfig for DYNAMIC_FTRACE
Steven Rostedt [Thu, 28 Feb 2013 02:48:09 +0000]
ftrace: Update the kconfig for DYNAMIC_FTRACE

commit db05021d49a994ee40a9735d9c3cb0060c9babb8 upstream.

The prompt to enable DYNAMIC_FTRACE (the ability to nop and
enable function tracing at run time) had a confusing statement:

 "enable/disable ftrace tracepoints dynamically"

This was written before tracepoints were added to the kernel,
but now that tracepoints have been added, this is very confusing
and has confused people enough to give wrong information during
presentations.

Not only that, I looked at the help text, and it still references
that dreaded daemon that use to wake up once a second to update
the nop locations and brick NICs, that hasn't been around for over
five years.

Time to bring the text up to the current decade.

Reported-by: Ezequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoFix memory leak in cpufreq stats.
Tu, Xiaobing [Mon, 22 Oct 2012 23:03:00 +0000]
Fix memory leak in cpufreq stats.

commit e37736777254ce1abc85493a5cacbefe5983b896 upstream.

When system enters sleep, non-boot CPUs will be disabled.
Cpufreq stats sysfs is created when the CPU is up, but it is not
freed when the CPU is going down. This will cause memory leak.

Signed-off-by: xiaobing tu <xiaobing.tu@intel.com>
Signed-off-by: guifang tang <guifang.tang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Colin Cross <ccross@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agovfs: fix pipe counter breakage
Al Viro [Tue, 12 Mar 2013 02:59:49 +0000]
vfs: fix pipe counter breakage

commit a930d8790552658140d7d0d2e316af4f0d76a512 upstream.

If you open a pipe for neither read nor write, the pipe code will not
add any usage counters to the pipe, causing the 'struct pipe_inode_info"
to be potentially released early.

That doesn't normally matter, since you cannot actually use the pipe,
but the pipe release code - particularly fasync handling - still expects
the actual pipe infrastructure to all be there.  And rather than adding
NULL pointer checks, let's just disallow this case, the same way we
already do for the named pipe ("fifo") case.

This is ancient going back to pre-2.4 days, and until trinity, nobody
naver noticed.

Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoFix: compat_rw_copy_check_uvector() misuse in aio, readv, writev, and security keys
Mathieu Desnoyers [Mon, 25 Feb 2013 15:20:36 +0000]
Fix: compat_rw_copy_check_uvector() misuse in aio, readv, writev, and security keys

commit 8aec0f5d4137532de14e6554fd5dd201ff3a3c49 upstream.

Looking at mm/process_vm_access.c:process_vm_rw() and comparing it to
compat_process_vm_rw() shows that the compatibility code requires an
explicit "access_ok()" check before calling
compat_rw_copy_check_uvector(). The same difference seems to appear when
we compare fs/read_write.c:do_readv_writev() to
fs/compat.c:compat_do_readv_writev().

This subtle difference between the compat and non-compat requirements
should probably be debated, as it seems to be error-prone. In fact,
there are two others sites that use this function in the Linux kernel,
and they both seem to get it wrong:

Now shifting our attention to fs/aio.c, we see that aio_setup_iocb()
also ends up calling compat_rw_copy_check_uvector() through
aio_setup_vectored_rw(). Unfortunately, the access_ok() check appears to
be missing. Same situation for
security/keys/compat.c:compat_keyctl_instantiate_key_iov().

I propose that we add the access_ok() check directly into
compat_rw_copy_check_uvector(), so callers don't have to worry about it,
and it therefore makes the compat call code similar to its non-compat
counterpart. Place the access_ok() check in the same location where
copy_from_user() can trigger a -EFAULT error in the non-compat code, so
the ABI behaviors are alike on both compat and non-compat.

While we are here, fix compat_do_readv_writev() so it checks for
compat_rw_copy_check_uvector() negative return values.

And also, fix a memory leak in compat_keyctl_instantiate_key_iov() error
handling.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agokeys: fix race with concurrent install_user_keyrings()
David Howells [Tue, 12 Mar 2013 05:44:31 +0000]
keys: fix race with concurrent install_user_keyrings()

commit 0da9dfdd2cd9889201bc6f6f43580c99165cd087 upstream.

This fixes CVE-2013-1792.

There is a race in install_user_keyrings() that can cause a NULL pointer
dereference when called concurrently for the same user if the uid and
uid-session keyrings are not yet created.  It might be possible for an
unprivileged user to trigger this by calling keyctl() from userspace in
parallel immediately after logging in.

Assume that we have two threads both executing lookup_user_key(), both
looking for KEY_SPEC_USER_SESSION_KEYRING.

THREAD A THREAD B
=============================== ===============================
==>call install_user_keyrings();
if (!cred->user->session_keyring)
==>call install_user_keyrings()
...
user->uid_keyring = uid_keyring;
if (user->uid_keyring)
return 0;
<==
key = cred->user->session_keyring [== NULL]
user->session_keyring = session_keyring;
atomic_inc(&key->usage); [oops]

At the point thread A dereferences cred->user->session_keyring, thread B
hasn't updated user->session_keyring yet, but thread A assumes it is
populated because install_user_keyrings() returned ok.

The race window is really small but can be exploited if, for example,
thread B is interrupted or preempted after initializing uid_keyring, but
before doing setting session_keyring.

This couldn't be reproduced on a stock kernel.  However, after placing
systemtap probe on 'user->session_keyring = session_keyring;' that
introduced some delay, the kernel could be crashed reliably.

Fix this by checking both pointers before deciding whether to return.
Alternatively, the test could be done away with entirely as it is checked
inside the mutex - but since the mutex is global, that may not be the best
way.

Signed-off-by: David Howells <dhowells@redhat.com>
Reported-by: Mateusz Guzik <mguzik@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agocrypto: user - fix info leaks in report API
Mathias Krause [Tue, 5 Feb 2013 17:19:13 +0000]
crypto: user - fix info leaks in report API

commit 9a5467bf7b6e9e02ec9c3da4e23747c05faeaac6 upstream.

Three errors resulting in kernel memory disclosure:

1/ The structures used for the netlink based crypto algorithm report API
are located on the stack. As snprintf() does not fill the remainder of
the buffer with null bytes, those stack bytes will be disclosed to users
of the API. Switch to strncpy() to fix this.

2/ crypto_report_one() does not initialize all field of struct
crypto_user_alg. Fix this to fix the heap info leak.

3/ For the module name we should copy only as many bytes as
module_name() returns -- not as much as the destination buffer could
hold. But the current code does not and therefore copies random data
from behind the end of the module name, as the module name is always
shorter than CRYPTO_MAX_ALG_NAME.

Also switch to use strncpy() to copy the algorithm's name and
driver_name. They are strings, after all.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoxen/pat: Disable PAT using pat_enabled value.
Konrad Rzeszutek Wilk [Tue, 26 Feb 2013 17:51:27 +0000]
xen/pat: Disable PAT using pat_enabled value.

commit c79c49826270b8b0061b2fca840fc3f013c8a78a upstream.

The git commit 8eaffa67b43e99ae581622c5133e20b0f48bcef1
(xen/pat: Disable PAT support for now) explains in details why
we want to disable PAT for right now. However that
change was not enough and we should have also disabled
the pat_enabled value. Otherwise we end up with:

mmap-example:3481 map pfn expected mapping type write-back for
[mem 0x00010000-0x00010fff], got uncached-minus
 ------------[ cut here ]------------
WARNING: at /build/buildd/linux-3.8.0/arch/x86/mm/pat.c:774 untrack_pfn+0xb8/0xd0()
mem 0x00010000-0x00010fff], got uncached-minus
------------[ cut here ]------------
WARNING: at /build/buildd/linux-3.8.0/arch/x86/mm/pat.c:774
untrack_pfn+0xb8/0xd0()
...
Pid: 3481, comm: mmap-example Tainted: GF 3.8.0-6-generic #13-Ubuntu
Call Trace:
 [<ffffffff8105879f>] warn_slowpath_common+0x7f/0xc0
 [<ffffffff810587fa>] warn_slowpath_null+0x1a/0x20
 [<ffffffff8104bcc8>] untrack_pfn+0xb8/0xd0
 [<ffffffff81156c1c>] unmap_single_vma+0xac/0x100
 [<ffffffff81157459>] unmap_vmas+0x49/0x90
 [<ffffffff8115f808>] exit_mmap+0x98/0x170
 [<ffffffff810559a4>] mmput+0x64/0x100
 [<ffffffff810560f5>] dup_mm+0x445/0x660
 [<ffffffff81056d9f>] copy_process.part.22+0xa5f/0x1510
 [<ffffffff81057931>] do_fork+0x91/0x350
 [<ffffffff81057c76>] sys_clone+0x16/0x20
 [<ffffffff816ccbf9>] stub_clone+0x69/0x90
 [<ffffffff816cc89d>] ? system_call_fastpath+0x1a/0x1f
---[ end trace 4918cdd0a4c9fea4 ]---

(a similar message shows up if you end up launching 'mcelog')

The call chain is (as analyzed by Liu, Jinsong):
do_fork
  --> copy_process
    --> dup_mm
      --> dup_mmap
        --> copy_page_range
          --> track_pfn_copy
            --> reserve_pfn_range
              --> line 624: flags != want_flags
It comes from different memory types of page table (_PAGE_CACHE_WB) and MTRR
(_PAGE_CACHE_UC_MINUS).

Stefan Bader dug in this deep and found out that:
"That makes it clearer as this will do

reserve_memtype(...)
--> pat_x_mtrr_type
  --> mtrr_type_lookup
    --> __mtrr_type_lookup

And that can return -1/0xff in case of MTRR not being enabled/initialized. Which
is not the case (given there are no messages for it in dmesg). This is not equal
to MTRR_TYPE_WRBACK and thus becomes _PAGE_CACHE_UC_MINUS.

It looks like the problem starts early in reserve_memtype:

        if (!pat_enabled) {
                /* This is identical to page table setting without PAT */
                if (new_type) {
                        if (req_type == _PAGE_CACHE_WC)
                                *new_type = _PAGE_CACHE_UC_MINUS;
                        else
                                *new_type = req_type & _PAGE_CACHE_MASK;
                }
                return 0;
        }

This would be what we want, that is clearing the PWT and PCD flags from the
supported flags - if pat_enabled is disabled."

This patch does that - disabling PAT.

Reported-by: Sander Eikelenboom <linux@eikelenboom.it>
Reported-and-Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reported-and-Tested-by: Stefan Bader <stefan.bader@canonical.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoHID: logitech-dj: do not directly call hid_output_raw_report() during probe
Benjamin Tissoires [Tue, 5 Mar 2013 16:09:00 +0000]
HID: logitech-dj: do not directly call hid_output_raw_report() during probe

commit dcd9006b1b053c7b1cebe81333261d4fd492ffeb upstream.

hid_output_raw_report() makes a direct call to usb_control_msg(). However,
some USB3 boards have shown that the usb device is not ready during the
.probe(). This blocks the entire usb device, and the paired mice, keyboards
are not functional. The dmesg output is the following:

[   11.912287] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-2/input2
[   11.912537] logitech-djreceiver 0003:046D:C52B.0003: logi_dj_probe:logi_dj_recv_query_paired_devices error:-32
[   11.912636] logitech-djreceiver: probe of 0003:046D:C52B.0003 failed with error -32

Relying on the scheduled call to usbhid_submit_report() fixes the problem.

related bugs:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1072082
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1039143
https://bugzilla.redhat.com/show_bug.cgi?id=840391
https://bugzilla.kernel.org/show_bug.cgi?id=49781

Reported-and-tested-by: Bob Bowles <bobjohnbowles@gmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoe1000e: fix pci-device enable-counter balance
Konstantin Khlebnikov [Tue, 5 Mar 2013 09:42:59 +0000]
e1000e: fix pci-device enable-counter balance

commit 4e0855dff094b0d56d6b5b271e0ce7851cc1e063 upstream.

This patch removes redundant and unbalanced pci_disable_device() from
__e1000_shutdown(). pci_clear_master() is enough, device can go into
suspended state with elevated enable_cnt.

Bug was introduced in commit 23606cf5d1192c2b17912cb2ef6e62f9b11de133
("e1000e / PCI / PM: Add basic runtime PM support (rev. 4)") in v2.6.35

Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Bruce Allan <bruce.w.allan@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Borislav Petkov <bp@suse.de>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoALSA: vmaster: Fix slave change notification
Takashi Iwai [Tue, 5 Mar 2013 14:43:39 +0000]
ALSA: vmaster: Fix slave change notification

commit 2069d483b39a603a5f3428a19d3b4ac89aa97f48 upstream.

When a value of a vmaster slave control is changed, the ctl change
notification is sometimes ignored.  This happens when the master
control overrides, e.g. when the corresponding master control is
muted.  The reason is that slave_put() returns the value of the actual
slave put callback, and it doesn't reflect the virtual slave value
change.

This patch fixes the function just to return 1 whenever a slave value
is changed.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoALSA: ice1712: Initialize card->private_data properly
Sean Connor [Thu, 28 Feb 2013 14:20:00 +0000]
ALSA: ice1712: Initialize card->private_data properly

commit 69a4cfdd444d1fe5c24d29b3a063964ac165d2cd upstream.

Set card->private_data in snd_ice1712_create for fixing NULL
dereference in snd_ice1712_remove().

Signed-off-by: Sean Connor <sconnor004@allyinics.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoARM: 7663/1: perf: fix ARMv7 EVTYPE_MASK to include NSH bit
Will Deacon [Thu, 28 Feb 2013 16:49:11 +0000]
ARM: 7663/1: perf: fix ARMv7 EVTYPE_MASK to include NSH bit

commit f2fe09b055e2549de41fb107b34c60bac4a1b0cf upstream.

Masked out PMXEVTYPER.NSH means that we can't enable profiling at PL2,
regardless of the settings in the HDCR.

This patch fixes the broken mask.

Reported-by: Christoffer Dall <cdall@cs.columbia.edu>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agodrm/radeon: add primary dac adj quirk for R200 board
Alex Deucher [Wed, 27 Feb 2013 17:01:58 +0000]
drm/radeon: add primary dac adj quirk for R200 board

commit e8fc41377f5037ff7a661ea06adc05f1daec1548 upstream.

vbios values are wrong leading to colors that are
too bright.  Use the default values instead.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agohwmon: (pmbus/ltc2978) Use detected chip ID to select supported functionality
Guenter Roeck [Thu, 21 Feb 2013 18:49:40 +0000]
hwmon: (pmbus/ltc2978) Use detected chip ID to select supported functionality

commit f366fccd0809f13ba20d64cae3c83f7338c88af7 upstream.

We read the chip ID from the chip, use it to determine if the chip ID provided
to the driver is correct, and report it if wrong. We should also use the
correct chip ID to select supported functionality.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agohwmon: (pmbus/ltc2978) Fix peak attribute handling
Guenter Roeck [Thu, 21 Feb 2013 17:33:25 +0000]
hwmon: (pmbus/ltc2978) Fix peak attribute handling

commit dbd712c2272764a536e29ad6841dba74989a39d9 upstream.

Peak attributes were not initialized and cleared correctly.
Also, temp2_max is only supported on page 0 and thus does not need to be
an array.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agohwmon: (sht15) Check return value of regulator_enable()
Mark Brown [Sat, 2 Mar 2013 07:33:30 +0000]
hwmon: (sht15) Check return value of regulator_enable()

commit 3e78080f81481aa8340374d5a37ae033c1cf4272 upstream.

Not having power is a pretty serious error so check that we are able to
enable the supply and error out if we can't.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

6 years agomd: raid0: fix error return from create_stripe_zones.
NeilBrown [Thu, 21 Feb 2013 04:36:38 +0000]
md: raid0: fix error return from create_stripe_zones.

commit 58ebb34c49fcfcaa029e4b1c1453d92583900f9a upstream.

Create_stripe_zones returns an error slightly differently to
raid0_run and to raid0_takeover_*.

The error returned used by the second was wrong and an error would
result in mddev->private being set to NULL and sooner or later a
crash.

So never return NULL, return ERR_PTR(err), not NULL from
create_stripe_zones.

This bug has been present since 2.6.35 so the fix is suitable
for any kernel since then.

Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agomd: fix two bugs when attempting to resize RAID0 array.
NeilBrown [Thu, 21 Feb 2013 03:33:17 +0000]
md: fix two bugs when attempting to resize RAID0 array.

commit a64685399181780998281fe07309a94b25dd24c3 upstream.

You cannot resize a RAID0 array (in terms of making the devices
bigger), but the code doesn't entirely stop you.
So:

 disable setting of the available size on each device for
 RAID0 and Linear devices.  This must not change as doing so
 can change the effective layout of data.

 Make sure that the size that raid0_size() reports is accurate,
 but rounding devices sizes to chunk sizes.  As the device sizes
 cannot change now, this isn't so important, but it is best to be
 safe.

Without this change:
  mdadm --grow /dev/md0 -z max
  mdadm --grow /dev/md0 -Z max
  then read to the end of the array

can cause a BUG in a RAID0 array.

These bugs have been present ever since it became possible
to resize any device, which is a long time.  So the fix is
suitable for any -stable kerenl.

Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agomd: protect against crash upon fsync on ro array
Sebastian Riemer [Thu, 21 Feb 2013 02:28:09 +0000]
md: protect against crash upon fsync on ro array

commit bbfa57c0f2243a7c31fd248d22e9861a2802cad5 upstream.

If an fsync occurs on a read-only array, we need to send a
completion for the IO and may not increment the active IO count.
Otherwise, we hit a bug trace and can't stop the MD array anymore.

By advice of Christoph Hellwig we return success upon a flush
request but we return -EROFS for other writes.
We detect flush requests by checking if the bio has zero sectors.

This patch is suitable to any -stable kernel to which it applies.

Signed-off-by: Sebastian Riemer <sebastian.riemer@profitbricks.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: NeilBrown <neilb@suse.de>
Reported-by: Ben Hutchings <ben@decadent.org.uk>
Acked-by: Paul Menzel <paulepanter@users.sourceforge.net>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoath9k_hw: improve reset reliability after errors
Felix Fietkau [Mon, 25 Feb 2013 19:51:07 +0000]
ath9k_hw: improve reset reliability after errors

commit 3412f2f086ea7531378fabe756bd4a1109994ae6 upstream.

On many different chips, important aspects of the MAC state are not
fully cleared by a warm reset. This can show up as tx/rx hangs, those
annoying "DMA failed to stop in 10 ms..." messages or other quirks.

On AR933x, the chip can occasionally get stuck in a way that only a
driver unload/reload or a reboot would bring it back to life.

With this patch, a full reset is issued when bringing the chip out of
FULL-SLEEP state (after idle), or if either Rx or Tx was not shut down
properly. This makes the DMA related error messages disappear completely
in my tests on AR933x, and the chip does not get stuck anymore.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoath9k: fix RSSI dummy marker value
Felix Fietkau [Fri, 22 Feb 2013 20:09:17 +0000]
ath9k: fix RSSI dummy marker value

commit a3d63cadbad97671d740a9698acc2c95d1ca6e79 upstream.

RSSI is being stored internally as s8 in several places. The indication
of an unset RSSI value, ATH_RSSI_DUMMY_MARKER, was supposed to have been
set to 127, but ended up being set to 0x127 because of a code cleanup
mistake. This could lead to invalid signal strength values in a few
places.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agomwifiex: correct sleep delay counter
Avinash Patil [Tue, 26 Feb 2013 00:01:34 +0000]
mwifiex: correct sleep delay counter

commit 3e7a4ff7c5b6423ddb644df9c41b8b6d2fb79d30 upstream.

Maximum delay for waking up card is 50 ms. Because of typo in
counter, this delay goes to 500ms. This patch fixes the bug.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agohw_random: make buffer usable in scatterlist.
Rusty Russell [Mon, 4 Mar 2013 23:37:08 +0000]
hw_random: make buffer usable in scatterlist.

commit f7f154f1246ccc5a0a7e9ce50932627d60a0c878 upstream.

virtio_rng feeds the randomness buffer handed by the core directly
into the scatterlist, since commit bb347d98079a547e80bd4722dee1de61e4dca0e8.

However, if CONFIG_HW_RANDOM=m, the static buffer isn't a linear address
(at least on most archs).  We could fix this in virtio_rng, but it's actually
far easier to just do it in the core as virtio_rng would have to allocate
a buffer every time (it doesn't know how much the core will want to read).

Reported-by: Aurelien Jarno <aurelien@aurel32.net>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoata_piix: reenable MS Virtual PC guests
Olaf Hering [Tue, 18 Sep 2012 15:48:01 +0000]
ata_piix: reenable MS Virtual PC guests

commit d9904344fc4052fbe7e4dc137eba0dcdadf326bd upstream.

An earlier commit cd006086fa5d91414d8ff9ff2b78fbb593878e3c ("ata_piix:
defer disks to the Hyper-V drivers by default") broke MS Virtual PC
guests. Hyper-V guests and Virtual PC guests have nearly identical DMI
info. As a result the driver does currently ignore the emulated hardware
in Virtual PC guests and defers the handling to hv_blkvsc. Since Virtual
PC does not offer paravirtualized drivers no disks will be found in the
guest.

One difference in the DMI info is the product version. This patch adds a
match for MS Virtual PC 2007 and "unignores" the emulated hardware.

This was reported for openSuSE 12.1 in bugzilla:
https://bugzilla.novell.com/show_bug.cgi?id=737532

Here is a detailed list of DMI info from example guests:

hwinfo --bios:

virtual pc guest:

  System Info: #1
    Manufacturer: "Microsoft Corporation"
    Product: "Virtual Machine"
    Version: "VS2005R2"
    Serial: "3178-9905-1533-4840-9282-0569-59"
    UUID: undefined, but settable
    Wake-up: 0x06 (Power Switch)
  Board Info: #2
    Manufacturer: "Microsoft Corporation"
    Product: "Virtual Machine"
    Version: "5.0"
    Serial: "3178-9905-1533-4840-9282-0569-59"
  Chassis Info: #3
    Manufacturer: "Microsoft Corporation"
    Version: "5.0"
    Serial: "3178-9905-1533-4840-9282-0569-59"
    Asset Tag: "7188-3705-6309-9738-9645-0364-00"
    Type: 0x03 (Desktop)
    Bootup State: 0x03 (Safe)
    Power Supply State: 0x03 (Safe)
    Thermal State: 0x01 (Other)
    Security Status: 0x01 (Other)

win2k8 guest:

  System Info: #1
    Manufacturer: "Microsoft Corporation"
    Product: "Virtual Machine"
    Version: "7.0"
    Serial: "9106-3420-9819-5495-1514-2075-48"
    UUID: undefined, but settable
    Wake-up: 0x06 (Power Switch)
  Board Info: #2
    Manufacturer: "Microsoft Corporation"
    Product: "Virtual Machine"
    Version: "7.0"
    Serial: "9106-3420-9819-5495-1514-2075-48"
  Chassis Info: #3
    Manufacturer: "Microsoft Corporation"
    Version: "7.0"
    Serial: "9106-3420-9819-5495-1514-2075-48"
    Asset Tag: "7076-9522-6699-1042-9501-1785-77"
    Type: 0x03 (Desktop)
    Bootup State: 0x03 (Safe)
    Power Supply State: 0x03 (Safe)
    Thermal State: 0x01 (Other)
    Security Status: 0x01 (Other)

win2k12 guest:

  System Info: #1
    Manufacturer: "Microsoft Corporation"
    Product: "Virtual Machine"
    Version: "7.0"
    Serial: "8179-1954-0187-0085-3868-2270-14"
    UUID: undefined, but settable
    Wake-up: 0x06 (Power Switch)
  Board Info: #2
    Manufacturer: "Microsoft Corporation"
    Product: "Virtual Machine"
    Version: "7.0"
    Serial: "8179-1954-0187-0085-3868-2270-14"
  Chassis Info: #3
    Manufacturer: "Microsoft Corporation"
    Version: "7.0"
    Serial: "8179-1954-0187-0085-3868-2270-14"
    Asset Tag: "8374-0485-4557-6331-0620-5845-25"
    Type: 0x03 (Desktop)
    Bootup State: 0x03 (Safe)
    Power Supply State: 0x03 (Safe)
    Thermal State: 0x01 (Other)
    Security Status: 0x01 (Other)

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoSUNRPC: Don't start the retransmission timer when out of socket space
Trond Myklebust [Fri, 22 Feb 2013 19:57:57 +0000]
SUNRPC: Don't start the retransmission timer when out of socket space

commit a9a6b52ee1baa865283a91eb8d443ee91adfca56 upstream.

If the socket is full, we're better off just waiting until it empties,
or until the connection is broken. The reason why we generally don't
want to time out is that the call to xprt->ops->release_xprt() will
trigger a connection reset, which isn't helpful...

Let's make an exception for soft RPC calls, since they have to provide
timeout guarantees.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoNFS: Don't allow NFS silly-renamed files to be deleted, no signal
Trond Myklebust [Fri, 22 Feb 2013 17:53:43 +0000]
NFS: Don't allow NFS silly-renamed files to be deleted, no signal

commit 5a7a613a47a715711b3f2d3322a0eac21d459166 upstream.

Commit 73ca100 broke the code that prevents the client from deleting
a silly renamed dentry.  This affected "delete on last close"
semantics as after that commit, nothing prevented removal of
silly-renamed files.  As a result, a process holding a file open
could easily get an ESTALE on the file in a directory where some
other process issued 'rm -rf some_dir_containing_the_file' twice.
Before the commit, any attempt at unlinking silly renamed files would
fail inside may_delete() with -EBUSY because of the
DCACHE_NFSFS_RENAMED flag.  The following testcase demonstrates
the problem:
  tail -f /nfsmnt/dir/file &
  rm -rf /nfsmnt/dir
  rm -rf /nfsmnt/dir
  # second removal does not fail, 'tail' process receives ESTALE

The problem with the above commit is that it unhashes the old and
new dentries from the lookup path, even in the normal case when
a signal is not encountered and it would have been safe to call
d_move.  Unfortunately the old dentry has the special
DCACHE_NFSFS_RENAMED flag set on it.  Unhashing has the
side-effect that future lookups call d_alloc(), allocating a new
dentry without the special flag for any silly-renamed files.  As a
result, subsequent calls to unlink silly renamed files do not fail
but allow the removal to go through.  This will result in ESTALE
errors for any other process doing operations on the file.

To fix this, go back to using d_move on success.
For the signal case, it's unclear what we may safely do beyond d_drop.

Reported-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agocifs: ensure that cifs_get_root() only traverses directories
Jeff Layton [Fri, 1 Feb 2013 20:11:01 +0000]
cifs: ensure that cifs_get_root() only traverses directories

commit ce2ac52105aa663056dfc17966ebed1bf93e6e64 upstream.

Kjell Braden reported this oops:

[  833.211970] BUG: unable to handle kernel NULL pointer dereference at           (null)
[  833.212816] IP: [<          (null)>]           (null)
[  833.213280] PGD 1b9b2067 PUD e9f7067 PMD 0
[  833.213874] Oops: 0010 [#1] SMP
[  833.214344] CPU 0
[  833.214458] Modules linked in: des_generic md4 nls_utf8 cifs vboxvideo drm snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq bnep rfcomm snd_timer bluetooth snd_seq_device ppdev snd vboxguest parport_pc joydev mac_hid soundcore snd_page_alloc psmouse i2c_piix4 serio_raw lp parport usbhid hid e1000
[  833.215629]
[  833.215629] Pid: 1752, comm: mount.cifs Not tainted 3.0.0-rc7-bisectcifs-fec11dd9a0+ #18 innotek GmbH VirtualBox/VirtualBox
[  833.215629] RIP: 0010:[<0000000000000000>]  [<          (null)>]           (null)
[  833.215629] RSP: 0018:ffff8800119c9c50  EFLAGS: 00010282
[  833.215629] RAX: ffffffffa02186c0 RBX: ffff88000c427780 RCX: 0000000000000000
[  833.215629] RDX: 0000000000000000 RSI: ffff88000c427780 RDI: ffff88000c4362e8
[  833.215629] RBP: ffff8800119c9c88 R08: ffff88001fc15e30 R09: 00000000d69515c7
[  833.215629] R10: ffffffffa0201972 R11: ffff88000e8f6a28 R12: ffff88000c4362e8
[  833.215629] R13: 0000000000000000 R14: 0000000000000000 R15: ffff88001181aaa6
[  833.215629] FS:  00007f2986171700(0000) GS:ffff88001fc00000(0000) knlGS:0000000000000000
[  833.215629] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[  833.215629] CR2: 0000000000000000 CR3: 000000001b982000 CR4: 00000000000006f0
[  833.215629] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  833.215629] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[  833.215629] Process mount.cifs (pid: 1752, threadinfo ffff8800119c8000, task ffff88001c1c16f0)
[  833.215629] Stack:
[  833.215629]  ffffffff8116a9b5 ffff8800119c9c88 ffffffff81178075 0000000000000286
[  833.215629]  0000000000000000 ffff88000c4276c0 ffff8800119c9ce8 ffff8800119c9cc8
[  833.215629]  ffffffff8116b06e ffff88001bc6fc00 ffff88000c4276c0 ffff88000c4276c0
[  833.215629] Call Trace:
[  833.215629]  [<ffffffff8116a9b5>] ? d_alloc_and_lookup+0x45/0x90
[  833.215629]  [<ffffffff81178075>] ? d_lookup+0x35/0x60
[  833.215629]  [<ffffffff8116b06e>] __lookup_hash.part.14+0x9e/0xc0
[  833.215629]  [<ffffffff8116b1d6>] lookup_one_len+0x146/0x1e0
[  833.215629]  [<ffffffff815e4f7e>] ? _raw_spin_lock+0xe/0x20
[  833.215629]  [<ffffffffa01eef0d>] cifs_do_mount+0x26d/0x500 [cifs]
[  833.215629]  [<ffffffff81163bd3>] mount_fs+0x43/0x1b0
[  833.215629]  [<ffffffff8117d41a>] vfs_kern_mount+0x6a/0xd0
[  833.215629]  [<ffffffff8117e584>] do_kern_mount+0x54/0x110
[  833.215629]  [<ffffffff8117fdc2>] do_mount+0x262/0x840
[  833.215629]  [<ffffffff81108a0e>] ? __get_free_pages+0xe/0x50
[  833.215629]  [<ffffffff8117f9ca>] ? copy_mount_options+0x3a/0x180
[  833.215629]  [<ffffffff8118075d>] sys_mount+0x8d/0xe0
[  833.215629]  [<ffffffff815ece82>] system_call_fastpath+0x16/0x1b
[  833.215629] Code:  Bad RIP value.
[  833.215629] RIP  [<          (null)>]           (null)
[  833.215629]  RSP <ffff8800119c9c50>
[  833.215629] CR2: 0000000000000000
[  833.238525] ---[ end trace ec00758b8d44f529 ]---

When walking down the path on the server, it's possible to hit a
symlink. The path walking code assumes that the caller will handle that
situation properly, but cifs_get_root() isn't set up for it. This patch
prevents the oops by simply returning an error.

A better solution would be to try and chase the symlinks here, but that's
fairly complicated to handle.

Fixes:

    https://bugzilla.kernel.org/show_bug.cgi?id=53221

Reported-and-tested-by: Kjell Braden <afflux@pentabarf.de>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agobtrfs: Init io_lock after cloning btrfs device struct
Thomas Gleixner [Wed, 20 Feb 2013 19:06:20 +0000]
btrfs: Init io_lock after cloning btrfs device struct

commit 1cba0cdf5e4dbcd9e5fa5b54d7a028e55e2ca057 upstream.

__btrfs_close_devices() clones btrfs device structs with
memcpy(). Some of the fields in the clone are reinitialized, but it's
missing to init io_lock. In mainline this goes unnoticed, but on RT it
leaves the plist pointing to the original about to be freed lock
struct.

Initialize io_lock after cloning, so no references to the original
struct are left.

Reported-and-tested-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agotarget/pscsi: Fix page increment
Asias He [Wed, 27 Feb 2013 05:29:29 +0000]
target/pscsi: Fix page increment

commit 472b72f2db7831d7dbe22ffdff4adee3bd49b05d upstream.

The page++ is wrong. It makes bio_add_pc_page() pointing to a wrong page
address if the 'while (len > 0 && data_len > 0) { ... }' loop is
executed more than one once.

Signed-off-by: Asias He <asias@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoSCSI: storvsc: Initialize the sglist
K. Y. Srinivasan [Wed, 6 Feb 2013 13:15:28 +0000]
SCSI: storvsc: Initialize the sglist

commit 9d2696e658ef4f209955ddaa987d43f1a1bd81a1 upstream.

Properly initialize scatterlist before using it.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoSCSI: dc395x: uninitialized variable in device_alloc()
Dan Carpenter [Mon, 11 Feb 2013 19:03:18 +0000]
SCSI: dc395x: uninitialized variable in device_alloc()

commit 208afec4f3be8c51ad6eebe6611dd6d2ad2fa298 upstream.

This bug was introduced back in bitkeeper days in 2003.  We use
"dcb->dev_mode" before it has been initialized.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Oliver Neukum <oliver@neukum.org>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoxen/pci: We don't do multiple MSI's.
Konrad Rzeszutek Wilk [Thu, 28 Feb 2013 14:05:41 +0000]
xen/pci: We don't do multiple MSI's.

commit 884ac2978a295b7df3c4a686d3bff6932bbbb460 upstream.

There is no hypercall to setup multiple MSI per PCI device.
As such with these two new commits:
-  08261d87f7d1b6253ab3223756625a5c74532293
   PCI/MSI: Enable multiple MSIs with pci_enable_msi_block_auto()
5ca72c4f7c412c2002363218901eba5516c476b1
   AHCI: Support multiple MSIs

we would call the PHYSDEVOP_map_pirq 'nvec' times with the same
contents of the PCI device. Sander discovered that we would get
the same PIRQ value 'nvec' times and return said values to the
caller. That of course meant that the device was configured only
with one MSI and AHCI would fail with:

ahci 0000:00:11.0: version 3.0
xen: registering gsi 19 triggering 0 polarity 1
xen: --> pirq=19 -> irq=19 (gsi=19)
(XEN) [2013-02-27 19:43:07] IOAPIC[0]: Set PCI routing entry (6-19 -> 0x99 -> IRQ 19 Mode:1 Active:1)
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
ahci: probe of 0000:00:11.0 failed with error -22

That is b/c in ahci_host_activate the second call to
devm_request_threaded_irq  would return -EINVAL as we passed in
(on the second run) an IRQ that was never initialized.

Reported-and-Tested-by: Sander Eikelenboom <linux@eikelenboom.it>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoARM: fix scheduling while atomic warning in alignment handling code
Russell King [Mon, 25 Feb 2013 16:10:42 +0000]
ARM: fix scheduling while atomic warning in alignment handling code

commit b255188f90e2bade1bd11a986dd1ca4861869f4d upstream.

Paolo Pisati reports that IPv6 triggers this warning:

BUG: scheduling while atomic: swapper/0/0/0x40000100
Modules linked in:
[<c001b1c4>] (unwind_backtrace+0x0/0xf0) from [<c0503c5c>] (__schedule_bug+0x48/0x5c)
[<c0503c5c>] (__schedule_bug+0x48/0x5c) from [<c0508608>] (__schedule+0x700/0x740)
[<c0508608>] (__schedule+0x700/0x740) from [<c007007c>] (__cond_resched+0x24/0x34)
[<c007007c>] (__cond_resched+0x24/0x34) from [<c05086dc>] (_cond_resched+0x3c/0x44)
[<c05086dc>] (_cond_resched+0x3c/0x44) from [<c0021f6c>] (do_alignment+0x178/0x78c)
[<c0021f6c>] (do_alignment+0x178/0x78c) from [<c00083e0>] (do_DataAbort+0x34/0x98)
[<c00083e0>] (do_DataAbort+0x34/0x98) from [<c0509a60>] (__dabt_svc+0x40/0x60)
Exception stack(0xc0763d70 to 0xc0763db8)
3d60:                                     e97e805e e97e806e 2c000000 11000000
3d80: ea86bb00 0000002c 00000011 e97e807e c076d2a8 e97e805e e97e806e 0000002c
3da0: 3d000000 c0763dbc c04b98fc c02a8490 00000113 ffffffff
[<c0509a60>] (__dabt_svc+0x40/0x60) from [<c02a8490>] (__csum_ipv6_magic+0x8/0xc8)

Fix this by using probe_kernel_address() stead of __get_user().

Reported-by: Paolo Pisati <p.pisati@gmail.com>
Tested-by: Paolo Pisati <p.pisati@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoARM: VFP: fix emulation of second VFP instruction
Russell King [Mon, 25 Feb 2013 16:09:12 +0000]
ARM: VFP: fix emulation of second VFP instruction

commit 5e4ba617c1b584b2e376f31a63bd4e734109318a upstream.

Martin Storsjö reports that the sequence:

        ee312ac1        vsub.f32        s4, s3, s2
        ee702ac0        vsub.f32        s5, s1, s0
        e59f0028        ldr             r0, [pc, #40]
        ee111a90        vmov            r1, s3

on Raspberry Pi (implementor 41 architecture 1 part 20 variant b rev 5)
where s3 is a denormal and s2 is zero results in incorrect behaviour -
the instruction "vsub.f32 s5, s1, s0" is not executed:

        VFP: bounce: trigger ee111a90 fpexc d0000780
        VFP: emulate: INST=0xee312ac1 SCR=0x00000000
        ...

As we can see, the instruction triggering the exception is the "vmov"
instruction, and we emulate the "vsub.f32 s4, s3, s2" but fail to
properly take account of the FPEXC_FP2V flag in FPEXC.  This is because
the test for the second instruction register being valid is bogus, and
will always skip emulation of the second instruction.

Reported-by: Martin Storsjö <martin@martin.st>
Tested-by: Martin Storsjö <martin@martin.st>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoLinux 3.4.35
Greg Kroah-Hartman [Sun, 3 Mar 2013 22:07:21 +0000]
Linux 3.4.35

6 years agousb hid quirks for Masterkit MA901 usb radio
Alexey Klimov [Mon, 12 Nov 2012 05:57:03 +0000]
usb hid quirks for Masterkit MA901 usb radio

commit 0322bd3980b3ebf7dde8474e22614cb443d6479a upstream.

Don't let Masterkit MA901 USB radio be handled by usb hid drivers.
This device will be handled by radio-ma901.c driver.

Signed-off-by: Alexey Klimov <klimov.linux@gmail.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoata_piix: Add Device IDs for Intel Wellsburg PCH
James Ralston [Sat, 9 Feb 2013 01:24:12 +0000]
ata_piix: Add Device IDs for Intel Wellsburg PCH

commit 3aee8bc52c415aba8148f144e5e5359b0fd75dd1 upstream.

This patch adds the IDE-mode SATA Device IDs for the Intel Wellsburg PCH

Signed-off-by: James Ralston <james.d.ralston@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoata_piix: IDE-mode SATA patch for Intel Avoton DeviceIDs
Seth Heasley [Fri, 25 Jan 2013 19:57:05 +0000]
ata_piix: IDE-mode SATA patch for Intel Avoton DeviceIDs

commit aaa515277db9585eeb4fdeb4637b9f9df50a1dd9 upstream.

This patch adds the IDE-mode SATA DeviceIDs for the Intel Avoton SOC.

Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoperf tools: Fix build with bison 2.3 and older.
Vinson Lee [Wed, 27 Feb 2013 02:30:30 +0000]
perf tools: Fix build with bison 2.3 and older.

commit 85df3b3769222894e9692b383c7af124b7721086 upstream.

The %name-prefix "prefix" syntax is not available on bison 2.3 and
older. Substitute with the -p "prefix" command-line option for
compatibility with older versions of bison.

This patch fixes this build error with older versions of bison.

CC util/sysfs.o
    BISON util/pmu-bison.c
util/pmu.y:2.14-24: syntax error, unexpected string, expecting =
make: *** [util/pmu-bison.c] Error 1

Signed-off-by: Vinson Lee <vlee@twitter.com>
Tested-by: Li Zefan <lizefan@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Link: http://lkml.kernel.org/r/1360792138-29186-1-git-send-email-vlee@twitter.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agostaging: comedi: check s->async for poll(), read() and write()
Ian Abbott [Wed, 27 Feb 2013 10:56:19 +0000]
staging: comedi: check s->async for poll(), read() and write()

commit cc400e185c07c15a42d2635995f422de5b94b696 upstream.

Some low-level comedi drivers (incorrectly) point `dev->read_subdev` or
`dev->write_subdev` to a subdevice that does not support asynchronous
commands.  Comedi's poll(), read() and write() file operation handlers
assume these subdevices do support asynchronous commands.  In
particular, they assume `s->async` is valid (where `s` points to the
read or write subdevice), which it won't be if it has been set
incorrectly.  This can lead to a NULL pointer dereference.

Check `s->async` is non-NULL in `comedi_poll()`, `comedi_read()` and
`comedi_write()` to avoid the bug.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agostaging: comedi: ni_labpc: set up command4 register *after* command3
Ian Abbott [Wed, 27 Feb 2013 12:52:46 +0000]
staging: comedi: ni_labpc: set up command4 register *after* command3

Commit 22056e2b46246d97ff0f7c6e21a77b8daa07f02c upstream.

Tuomas <tvainikk _at_ gmail _dot_ com> reported problems getting
meaningful output from a Lab-PC+ in differential mode for AI cmds, but
AI insn reads gave correct readings.  He tracked it down to two
problems, one of which is addressed by this patch.

It seems that writing to the command3 register after writing to the
command4 register in `labpc_ai_cmd()` messes up the differential
reference bit setting in the command4 register.  Set up the command4
register after the command3 register (as in `labpc_ai_rinsn()`) to avoid
the problem.

Thanks to Tuomas for suggesting the fix.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agostaging: comedi: ni_labpc: correct differential channel sequence for AI commands
Ian Abbott [Wed, 27 Feb 2013 12:52:45 +0000]
staging: comedi: ni_labpc: correct differential channel sequence for AI commands

Commit 4c4bc25d0fa6beaf054c0b4c3b324487f266c820 upstream.

Tuomas <tvainikk _at_ gmail _dot_ com> reported problems getting
meaningful output from a Lab-PC+ in differential mode for AI cmds, but
AI insn reads gave correct readings.  He tracked it down to two
problems, one of which is addressed by this patch.

It seems the setting of the channel bits for particular scanning modes
was incorrect for differential mode.  (Only half the number of channels
are available in differential mode; comedi refers to them as channels 0,
1, 2 and 3, but the hardware documentation refers to them as channels 0,
2, 4 and 6.)  In differential mode, the setting of the channel enable
bits in the command1 register should depend on whether the scan enable
bit is set.  Effectively, we need to double the comedi channel number
when the scan enable bit is not set in differential mode.  The scan
enable bit gets set when the AI scan mode is `MODE_MULT_CHAN_UP` or
`MODE_MULT_CHAN_DOWN`, and gets cleared when the AI scan mode is
`MODE_SINGLE_CHAN` or `MODE_SINGLE_CHAN_INTERVAL`.  The existing test
for whether the comedi channel number needs to be doubled in
differential mode is incorrect in `labpc_ai_cmd()`.  This patch corrects
the test.

Thanks to Tuomas for suggesting the fix.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoACPI: Add DMI entry for Sony VGN-FW41E_H
Joseph Salisbury [Tue, 5 Feb 2013 00:16:29 +0000]
ACPI: Add DMI entry for Sony VGN-FW41E_H

commit 66f2fda93b67fa744d406e6dcf443f67bac204b6 upstream.

This patch adds a quirk to allow the Sony VGN-FW41E_H to suspend/resume
properly.

References: http://bugs.launchpad.net/bugs/1113547
Signed-off-by: Joseph Salisbury <joseph.salisbury@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoab8500_btemp: Demote initcall sequence
Rajanikanth H.V [Wed, 23 Jan 2013 04:26:45 +0000]
ab8500_btemp: Demote initcall sequence

commit eeb0751c99522a4d1bbcc7b6bc1460cd07d07488 upstream.

Power supply subsystem creates thermal zone device for the property
'POWER_SUPPLY_PROP_TEMP' which requires thermal subsystem to be ready
before 'ab8500 battery temperature monitor' driver is initialized. ab8500
btemp driver is initialized with subsys_initcall whereas thermal subsystem
is initialized with fs_initcall which causes
thermal_zone_device_register(...) to crash since the required structure
'thermal_class' is not initialized yet:

Unable to handle kernel NULL pointer dereference at virtual address 000000a4
pgd = c0004000
[000000a4] *pgd=00000000
Internal error: Oops: 5 [#1] PREEMPT SMP ARM
Modules linked in:
CPU: 0    Tainted: G        W     (3.8.0-rc4-00001-g632fda8-dirty #1)
PC is at _raw_spin_lock+0x18/0x54
LR is at get_device_parent+0x50/0x1b8
pc : [<c02f1dd0>]    lr : [<c01cb248>]    psr: 60000013
sp : ef04bdc8  ip : 00000000  fp : c0446180
r10: ef216e38  r9 : c03af5d0  r8 : ef275c18
r7 : 00000000  r6 : c0476c14  r5 : ef275c18  r4 : ef095840
r3 : ef04a000  r2 : 00000001  r1 : 00000000  r0 : 000000a4
Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
Control: 10c5787d  Table: 0000404a  DAC: 00000015
Process swapper/0 (pid: 1, stack limit = 0xef04a238)
Stack: (0xef04bdc8 to 0xef04c000)
[...]
[<c02f1dd0>] (_raw_spin_lock+0x18/0x54) from [<c01cb248>] (get_device_parent+0x50/0x1b8)
[<c01cb248>] (get_device_parent+0x50/0x1b8) from [<c01cb8d8>] (device_add+0xa4/0x574)
[<c01cb8d8>] (device_add+0xa4/0x574) from [<c020b91c>] (thermal_zone_device_register+0x118/0x938)
[<c020b91c>] (thermal_zone_device_register+0x118/0x938) from [<c0202030>] (power_supply_register+0x170/0x1f8)
[<c0202030>] (power_supply_register+0x170/0x1f8) from [<c02055ec>] (ab8500_btemp_probe+0x208/0x47c)
[<c02055ec>] (ab8500_btemp_probe+0x208/0x47c) from [<c01cf0dc>] (platform_drv_probe+0x14/0x18)
[<c01cf0dc>] (platform_drv_probe+0x14/0x18) from [<c01cde70>] (driver_probe_device+0x74/0x20c)
[<c01cde70>] (driver_probe_device+0x74/0x20c) from [<c01ce094>] (__driver_attach+0x8c/0x90)
[<c01ce094>] (__driver_attach+0x8c/0x90) from [<c01cc640>] (bus_for_each_dev+0x4c/0x80)
[<c01cc640>] (bus_for_each_dev+0x4c/0x80) from [<c01cd6b4>] (bus_add_driver+0x16c/0x23c)
[<c01cd6b4>] (bus_add_driver+0x16c/0x23c) from [<c01ce54c>] (driver_register+0x78/0x14c)
[<c01ce54c>] (driver_register+0x78/0x14c) from [<c00086ac>] (do_one_initcall+0xfc/0x164)
[<c00086ac>] (do_one_initcall+0xfc/0x164) from [<c02e89c8>] (kernel_init+0x120/0x2b8)
[<c02e89c8>] (kernel_init+0x120/0x2b8) from [<c000e358>] (ret_from_fork+0x14/0x3c)
Code: e3c3303f e5932004 e2822001 e5832004 (e1903f9f)
---[ end trace ed9df72941b5bada ]---

Signed-off-by: Rajanikanth H.V <rajanikanth.hv@stericsson.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoab8500-chargalg: Only root should have write permission on sysfs file
Lee Jones [Thu, 17 Jan 2013 14:21:53 +0000]
ab8500-chargalg: Only root should have write permission on sysfs file

commit e3455002d04276c256a531f7175dce0f7d1cb78a upstream.

Only root should have write permission on sysfs file ab8500_chargalg/chargalg.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agocgroup: fix exit() vs rmdir() race
Li Zefan [Thu, 24 Jan 2013 06:43:28 +0000]
cgroup: fix exit() vs rmdir() race

commit 71b5707e119653039e6e95213f00479668c79b75 upstream.

In cgroup_exit() put_css_set_taskexit() is called without any lock,
which might lead to accessing a freed cgroup:

thread1                           thread2
---------------------------------------------
exit()
  cgroup_exit()
    put_css_set_taskexit()
      atomic_dec(cgrp->count);
                                   rmdir();
      /* not safe !! */
      check_for_release(cgrp);

rcu_read_lock() can be used to make sure the cgroup is alive.

Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agocpuset: fix cpuset_print_task_mems_allowed() vs rename() race
Li Zefan [Fri, 25 Jan 2013 08:08:01 +0000]
cpuset: fix cpuset_print_task_mems_allowed() vs rename() race

commit 63f43f55c9bbc14f76b582644019b8a07dc8219a upstream.

rename() will change dentry->d_name. The result of this race can
be worse than seeing partially rewritten name, but we might access
a stale pointer because rename() will re-allocate memory to hold
a longer name.

It's safe in the protection of dentry->d_lock.

v2: check NULL dentry before acquiring dentry lock.

Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agopstore: Avoid deadlock in panic and emergency-restart path
Seiji Aguchi [Fri, 11 Jan 2013 18:09:41 +0000]
pstore: Avoid deadlock in panic and emergency-restart path

commit 9f244e9cfd70c7c0f82d3c92ce772ab2a92d9f64 upstream.

[Issue]

When pstore is in panic and emergency-restart paths, it may be blocked
in those paths because it simply takes spin_lock.

This is an example scenario which pstore may hang up in a panic path:

 - cpuA grabs psinfo->buf_lock
 - cpuB panics and calls smp_send_stop
 - smp_send_stop sends IRQ to cpuA
 - after 1 second, cpuB gives up on cpuA and sends an NMI instead
 - cpuA is now in an NMI handler while still holding buf_lock
 - cpuB is deadlocked

This case may happen if a firmware has a bug and
cpuA is stuck talking with it more than one second.

Also, this is a similar scenario in an emergency-restart path:

 - cpuA grabs psinfo->buf_lock and stucks in a firmware
 - cpuB kicks emergency-restart via either sysrq-b or hangcheck timer.
   And then, cpuB is deadlocked by taking psinfo->buf_lock again.

[Solution]

This patch avoids the deadlocking issues in both panic and emergency_restart
paths by introducing a function, is_non_blocking_path(), to check if a cpu
can be blocked in current path.

With this patch, pstore is not blocked even if another cpu has
taken a spin_lock, in those paths by changing from spin_lock_irqsave
to spin_trylock_irqsave.

In addition, according to a comment of emergency_restart() in kernel/sys.c,
spin_lock shouldn't be taken in an emergency_restart path to avoid
deadlock. This patch fits the comment below.

<snip>
/**
 *      emergency_restart - reboot the system
 *
 *      Without shutting down any hardware or taking any locks
 *      reboot the system.  This is called when we know we are in
 *      trouble so this is our best effort to reboot.  This is
 *      safe to call in interrupt context.
 */
void emergency_restart(void)
<snip>

Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com>
Acked-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Cc: CAI Qian <caiqian@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoath9k_hw: fix calibration issues on chainmask that don't include chain 0
Felix Fietkau [Sun, 20 Jan 2013 20:55:20 +0000]
ath9k_hw: fix calibration issues on chainmask that don't include chain 0

commit 4a8f199508d79ff8a7d1e22f47b912baaf225336 upstream.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: CAI Qian <caiqian@redhat.com>
Reviewed-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agounbreak automounter support on 64-bit kernel with 32-bit userspace (v2)
Helge Deller [Mon, 4 Feb 2013 19:39:52 +0000]
unbreak automounter support on 64-bit kernel with 32-bit userspace (v2)

commit 4f4ffc3a5398ef9bdbb32db04756d7d34e356fcf upstream.

automount-support is broken on the parisc architecture, because the existing
#if list does not include a check for defined(__hppa__). The HPPA (parisc)
architecture is similiar to other 64bit Linux targets where we have to define
autofs_wqt_t (which is passed back and forth to user space) as int type which
has a size of 32bit across 32 and 64bit kernels.

During the discussion on the mailing list, H. Peter Anvin suggested to invert
the #if list since only specific platforms (specifically those who do not have
a 32bit userspace, like IA64 and Alpha) should have autofs_wqt_t as unsigned
long type.

This suggestion is probably the best way to go, since Arm64 (and maybe others?)
seems to have a non-working automounter. So in the long run even for other new
upcoming architectures this inverted check seem to be the best solution, since
it will not require them to change this #if again (unless they are 64bit only).

Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Acked-by: Ian Kent <raven@themaw.net>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
CC: James Bottomley <James.Bottomley@HansenPartnership.com>
CC: Rolf Eike Beer <eike-kernel@sf-tec.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agofuse: don't WARN when nlink is zero
Miklos Szeredi [Mon, 4 Feb 2013 14:57:42 +0000]
fuse: don't WARN when nlink is zero

commit dfca7cebc2679f3d129f8e680a8f199a7ad16e38 upstream.

drop_nlink() warns if nlink is already zero.  This is triggerable by a buggy
userspace filesystem.  The cure, I think, is worse than the disease so disable
the warning.

Reported-by: Tero Roponen <tero.roponen@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agovhost: fix length for cross region descriptor
Michael S. Tsirkin [Mon, 26 Nov 2012 05:57:27 +0000]
vhost: fix length for cross region descriptor

commit bd97120fc3d1a11f3124c7c9ba1d91f51829eb85 upstream.

If a single descriptor crosses a region, the
second chunk length should be decremented
by size translated so far, instead it includes
the full descriptor length.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agosvcrpc: make svc_age_temp_xprts enqueue under sv_lock
J. Bruce Fields [Sun, 10 Feb 2013 16:33:48 +0000]
svcrpc: make svc_age_temp_xprts enqueue under sv_lock

commit e75bafbff2270993926abcc31358361db74a9bc2 upstream.

svc_age_temp_xprts expires xprts in a two-step process: first it takes
the sv_lock and moves the xprts to expire off their server-wide list
(sv_tempsocks or sv_permsocks) to a local list.  Then it drops the
sv_lock and enqueues and puts each one.

I see no reason for this: svc_xprt_enqueue() will take sp_lock, but the
sv_lock and sp_lock are not otherwise nested anywhere (and documentation
at the top of this file claims it's correct to nest these with sp_lock
inside.)

Tested-by: Jason Tibbitts <tibbs@math.uh.edu>
Tested-by: Paweł Sikora <pawel.sikora@agmk.net>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agonfsd: Fix memleak
majianpeng [Tue, 29 Jan 2013 05:16:06 +0000]
nfsd: Fix memleak

commit 2d32b29a1c2830f7c42caa8258c714acd983961f upstream.

When free nfs-client, it must free the ->cl_stateids.

Signed-off-by: Jianpeng Ma <majianpeng@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoext4: fix free clusters calculation in bigalloc filesystem
Lukas Czerner [Fri, 22 Feb 2013 20:27:52 +0000]
ext4: fix free clusters calculation in bigalloc filesystem

commit 304e220f0879198b1f5309ad6f0be862b4009491 upstream.

ext4_has_free_clusters() should tell us whether there is enough free
clusters to allocate, however number of free clusters in the file system
is converted to blocks using EXT4_C2B() which is not only wrong use of
the macro (we should have used EXT4_NUM_B2C) but it's also completely
wrong concept since everything else is in cluster units.

Moreover when calculating number of root clusters we should be using
macro EXT4_NUM_B2C() instead of EXT4_B2C() otherwise the result might be
off by one. However r_blocks_count should always be a multiple of the
cluster ratio so doing a plain bit shift should be enough here. We
avoid using EXT4_B2C() because it's confusing.

As a result of the first problem number of free clusters is much bigger
than it should have been and ext4_has_free_clusters() would return 1 even
if there is really not enough free clusters available.

Fix this by removing the EXT4_C2B() conversion of free clusters and
using bit shift when calculating number of root clusters. This bug
affects number of xfstests tests covering file system ENOSPC situation
handling. With this patch most of the ENOSPC problems with bigalloc file
system disappear, especially the errors caused by delayed allocation not
having enough space when the actual allocation is finally requested.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoext4: fix xattr block allocation/release with bigalloc
Lukas Czerner [Mon, 18 Feb 2013 17:12:07 +0000]
ext4: fix xattr block allocation/release with bigalloc

commit 1231b3a1eb5740192aeebf5344dd6d6da000febf upstream.

Currently when new xattr block is created or released we we would call
dquot_free_block() or dquot_alloc_block() respectively, among the else
decrementing or incrementing the number of blocks assigned to the
inode by one block.

This however does not work for bigalloc file system because we always
allocate/free the whole cluster so we have to count with that in
dquot_free_block() and dquot_alloc_block() as well.

Use the clusters-to-blocks conversion EXT4_C2B() when passing number of
blocks to the dquot_alloc/free functions to fix the problem.

The problem has been revealed by xfstests #117 (and possibly others).

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoext4: fix race in ext4_mb_add_n_trim()
Niu Yawei [Sat, 2 Feb 2013 02:31:27 +0000]
ext4: fix race in ext4_mb_add_n_trim()

commit f1167009711032b0d747ec89a632a626c901a1ad upstream.

In ext4_mb_add_n_trim(), lg_prealloc_lock should be taken when
changing the lg_prealloc_list.

Signed-off-by: Niu Yawei <yawei.niu@intel.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoext4: check bh in ext4_read_block_bitmap()
Eryu Guan [Sat, 12 Jan 2013 21:33:25 +0000]
ext4: check bh in ext4_read_block_bitmap()

commit 15b49132fc972c63894592f218ea5a9a61b1a18f upstream.

Validate the bh pointer before using it, since
ext4_read_block_bitmap_nowait() might return NULL.

I've seen this in fsfuzz testing.

 EXT4-fs error (device loop0): ext4_read_block_bitmap_nowait:385: comm touch: Cannot get buffer for block bitmap - block_group = 0, block_bitmap = 3925999616
 BUG: unable to handle kernel NULL pointer dereference at           (null)
 IP: [<ffffffff8121de25>] ext4_wait_block_bitmap+0x25/0xe0
 ...
 Call Trace:
  [<ffffffff8121e1e5>] ext4_read_block_bitmap+0x35/0x60
  [<ffffffff8125e9c6>] ext4_free_blocks+0x236/0xb80
  [<ffffffff811d0d36>] ? __getblk+0x36/0x70
  [<ffffffff811d0a5f>] ? __find_get_block+0x8f/0x210
  [<ffffffff81191ef3>] ? kmem_cache_free+0x33/0x140
  [<ffffffff812678e5>] ext4_xattr_release_block+0x1b5/0x1d0
  [<ffffffff812679be>] ext4_xattr_delete_inode+0xbe/0x100
  [<ffffffff81222a7c>] ext4_free_inode+0x7c/0x4d0
  [<ffffffff812277b8>] ? ext4_mark_inode_dirty+0x88/0x230
  [<ffffffff8122993c>] ext4_evict_inode+0x32c/0x490
  [<ffffffff811b8cd7>] evict+0xa7/0x1c0
  [<ffffffff811b8ed3>] iput_final+0xe3/0x170
  [<ffffffff811b8f9e>] iput+0x3e/0x50
  [<ffffffff812316fd>] ext4_add_nondir+0x4d/0x90
  [<ffffffff81231d0b>] ext4_create+0xeb/0x170
  [<ffffffff811aae9c>] vfs_create+0xac/0xd0
  [<ffffffff811ac845>] lookup_open+0x185/0x1c0
  [<ffffffff8129e3b9>] ? selinux_inode_permission+0xa9/0x170
  [<ffffffff811acb54>] do_last+0x2d4/0x7a0
  [<ffffffff811af743>] path_openat+0xb3/0x480
  [<ffffffff8116a8a1>] ? handle_mm_fault+0x251/0x3b0
  [<ffffffff811afc49>] do_filp_open+0x49/0xa0
  [<ffffffff811bbaad>] ? __alloc_fd+0xdd/0x150
  [<ffffffff8119da28>] do_sys_open+0x108/0x1f0
  [<ffffffff8119db51>] sys_open+0x21/0x30
  [<ffffffff81618959>] system_call_fastpath+0x16/0x1b

Also fix comment for ext4_read_block_bitmap_nowait()

Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agomedia: rc: unlock on error in show_protocols()
Dan Carpenter [Tue, 27 Nov 2012 16:35:09 +0000]
media: rc: unlock on error in show_protocols()

commit 30ebc5e44d057a1619ad63fe32c8c1670c37c4b8 upstream.

We recently introduced a new return -ENODEV in this function but we need
to unlock before returning.

[mchehab@redhat.com: found two patches with the same fix. Merged SOB's/acks into one patch]
Acked-by: Herton R. Krzesinski <herton.krzesinski@canonical.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Douglas Bagnall <douglas@paradise.net.nz>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>