13 years ago[PATCH] Driver Core: remove unused exports
Greg Kroah-Hartman [Tue, 2 May 2006 14:59:59 +0000]
[PATCH] Driver Core: remove unused exports

Cc: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] platform_bus learns about modalias
David Brownell [Mon, 29 May 2006 17:37:33 +0000]
[PATCH] platform_bus learns about modalias

This patch adds modalias support to platform devices, for simpler
hotplug/coldplug driven driver setup.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] Driver Core: CONFIG_DEBUG_PM covers drivers/base/power too
David Brownell [Mon, 1 May 2006 20:58:33 +0000]
[PATCH] Driver Core: CONFIG_DEBUG_PM covers drivers/base/power too

The drivers/base/power PM debug messages should appear when
either PM or driver model debug are enabled.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] Driver core: class_device_add needs error checks
Stephen Hemminger [Wed, 26 Apr 2006 16:53:14 +0000]
[PATCH] Driver core: class_device_add needs error checks

class_device_add needs to check the return value of all the setup it
does. It doesn't handle out of memory well. This is not complete, probably
more needs to be done.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] i4l gigaset: move sysfs entry to tty class device
Hansjoerg Lipp [Sat, 22 Apr 2006 16:43:00 +0000]
[PATCH] i4l gigaset: move sysfs entry to tty class device

Using the class device pointer returned by tty_register_device() with
part 1 of the patch, attach the Gigaset drivers' "cidmode" sysfs entry
to its tty class device, where it can be found more easily by users
who do not know nor care which USB port the device is attached to.

Signed-off-by: Hansjoerg Lipp <hjlipp@web.de>
Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] TTY: return class device pointer from tty_register_device()
Hansjoerg Lipp [Sat, 22 Apr 2006 16:36:53 +0000]
[PATCH] TTY: return class device pointer from tty_register_device()

Let tty_register_device() return a pointer to the class device it creates.
This allows registrants to add their own sysfs files under the class
device node.

Signed-off-by: Hansjoerg Lipp <hjlipp@web.de>
Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] Driver core: bus device event delay
Kay Sievers [Tue, 4 Apr 2006 18:42:26 +0000]
[PATCH] Driver core: bus device event delay

split bus_add_device() and send device uevents after sysfs population

Signed-off-by: Kay Sievers <kay.sievers@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] CCISS: add device symlink to the block cciss block devices in sysfs
Greg Kroah-Hartman [Thu, 27 Apr 2006 22:46:39 +0000]
[PATCH] CCISS: add device symlink to the block cciss block devices in sysfs

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] Add kernel<->userspace ABI stability documentation
Greg Kroah-Hartman [Thu, 27 Apr 2006 21:10:12 +0000]
[PATCH] Add kernel<->userspace ABI stability documentation

Signed-off-by: Kay Sievers <kay.sievers@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] kobject: make people pay attention to kobject_add errors
Greg Kroah-Hartman [Thu, 18 May 2006 17:39:21 +0000]
[PATCH] kobject: make people pay attention to kobject_add errors

These really need to be fixed, shout it out to the world.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6
Linus Torvalds [Wed, 21 Jun 2006 18:23:13 +0000]
Merge /pub/scm/linux/kernel/git/gregkh/pci-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: (30 commits)
  [PATCH] PCI Hotplug: Fix recovery path from errors during pcie_init()
  [PATCH] PCI Hotplug: fake NULL pointer dereferences in IBM Hot Plug Controller Driver
  [PATCH] shpchp: Cleanup improper info messages
  [PATCH] shpchp: Remove Unused hpc_evelnt_lock
  [PATCH] shpchp: Cleanup interrupt polling timer
  [PATCH] shpchp: Cleanup SHPC commands
  [PATCH] shpchp: Cleanup interrupt handler
  [PATCH] shpchp: Remove unnecessary hpc_ctlr_handle check
  [PATCH] pciehp: Implement get_address callback
  [PATCH] pciehp: Add missing pci_dev_put
  [PATCH] pciehp: Replace pci_find_slot() with pci_get_slot()
  [PATCH] SGI Hotplug: Incorrect power status
  [PATCH] shpchp: Create shpchpd at controller probe time
  [PATCH] shpchp: Mask Global SERR and Intr at controller release time
  [PATCH] SHPC: Fix SHPC Contoller SERR-INT Register bits access
  [PATCH] SHPC: Fix SHPC Logical Slot Register bits access
  [PATCH] SHPC: Cleanup SHPC Logical Slot Register bits access
  [PATCH] SHPC: Cleanup SHPC Logical Slot Register access
  [PATCH] SHPC: Cleanup SHPC register access
  [PATCH] pciehp: Fix programming hotplug parameters
  ...

13 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
Linus Torvalds [Wed, 21 Jun 2006 18:18:25 +0000]
Merge /pub/scm/linux/kernel/git/jejb/scsi-misc-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (85 commits)
  [SCSI] 53c700: remove reliance on deprecated cmnd fields
  [SCSI] hptiop: don't use cmnd->bufflen
  [SCSI] hptiop: HighPoint RocketRAID 3xxx controller driver
  [SCSI] aacraid: small misc. cleanups
  [SCSI] aacraid: Update supported product information
  [SCSI] aacraid: Fix return code interpretation
  [SCSI] scsi_transport_sas: fix panic in sas_free_rphy
  [SCSI] remove RQ_SCSI_* flags
  [SCSI] remove scsi_request infrastructure
  [SCSI] mptfusion: change driver revision to 3.03.10
  [SCSI] mptfc: abort of board reset leaves port dead requiring reboot
  [SCSI] mptfc: fix fibre channel infinite request/response loop
  [SCSI] mptfc: set fibre channel fw target missing timers to one second
  [SCSI] mptfusion: move fc event/reset handling to mptfc
  [SCSI] spi transport: don't allow dt to be set on SE or HVD buses
  [SCSI] aic7xxx: expose the bus setting to sysfs
  [SCSI] scsi: remove Documentation/scsi/cpqfc.txt
  [SCSI] drivers/scsi: Use ARRAY_SIZE macro
  [SCSI] Remove last page_address from dc395x.c
  [SCSI] hptiop: HighPoint RocketRAID 3xxx controller driver
  ...

Fixed up conflicts in drivers/message/fusion/mptbase.c manually (due to
the sparc interrupt cleanups)

13 years ago[PATCH] add __iowrite64_copy
Brice Goglin [Wed, 21 Jun 2006 03:03:02 +0000]
[PATCH] add __iowrite64_copy

Introduce __iowrite64_copy.  It will be used by the Myri-10G Ethernet
driver to post requests to the NIC.  This driver will be submitted soon.

__iowrite64_copy copies to I/O memory in units of 64 bits when possible (on
64 bit architectures).  It reverts to __iowrite32_copy on 32 bit
architectures.

Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

13 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/bcollins/linux1394-2.6
Linus Torvalds [Wed, 21 Jun 2006 03:01:16 +0000]
Merge git://git./linux/kernel/git/bcollins/linux1394-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/bcollins/linux1394-2.6: (28 commits)
  eth1394: replace __constant_htons by htons
  ieee1394: adjust code formatting in highlevel.c
  ieee1394: hl_irqs_lock is taken in hardware interrupt context
  ieee1394_core: switch to kthread API
  ieee1394: sbp2: Kconfig fix
  ieee1394: add preprocessor constant for invalid csr address
  sbp2: fix deregistration of status fifo address space
  [PATCH] eth1394: endian fixes
  Fix broken suspend/resume in ohci1394
  sbp2: use __attribute__((packed)) for on-the-wire structures
  sbp2: provide helptext for CONFIG_IEEE1394_SBP2_PHYS_DMA and mark it experimental
  Update feature removal of obsolete raw1394 ISO requests.
  sbp2: fix S800 transfers if phys_dma is off
  sbp2: remove ohci1394 specific constant
  ohci1394: make phys_dma parameter read-only
  ohci1394: set address range properties
  ieee1394: extend lowlevel API for address range properties
  sbp2: log number of supported concurrent logins
  sbp2: remove manipulation of inquiry response
  ieee1394: save RAM by using a single tlabel for broadcast transactions
  ...

13 years ago[PATCH] s390: add __raw_writeq required by __iowrite64_copy
Cedric Le Goater [Tue, 20 Jun 2006 04:10:44 +0000]
[PATCH] s390: add __raw_writeq required by __iowrite64_copy

It also adds all the related quad routines.

Signed-off-by: Cedric Le Goater <clg@fr.ibm.com>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

13 years agoFix up CFQ scheduler for recent rbtree node shrinkage
Linus Torvalds [Wed, 21 Jun 2006 02:44:03 +0000]
Fix up CFQ scheduler for recent rbtree node shrinkage

The color is now in the low bits of the parent pointer, and initializing
it to 0 happens as part of the whole memset above, so just remove the
unnecessary RB_CLEAR_COLOR.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>

13 years ago[FORCEDETH] Fix xmit_lock/netif_tx_lock after merge
Herbert Xu [Wed, 21 Jun 2006 00:53:54 +0000]
[FORCEDETH] Fix xmit_lock/netif_tx_lock after merge

There has been an update to the forcedeth driver that added a few new
uses of xmit_lock which is no longer meant to be used directly.  This
patch replaces them with netif_tx_lock_bh.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

13 years agoMerge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Wed, 21 Jun 2006 00:52:36 +0000]
Merge branch 'devel' of /home/rmk/linux-2.6-arm

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (42 commits)
  [ARM] Fix tosa build error
  [ARM] 3610/1: Make reboot work on Versatile
  [ARM] 3609/1: S3C24XX: defconfig update for s3c2410_defconfig
  [ARM] 3591/1: Anubis: IDE device definitions
  [ARM] Include asm/hardware.h not asm/arch/hardware.h
  [ARM] 3594/1: Poodle: Add touchscreen support + other updates
  [ARM] 3564/1: sharpsl_pm: Abstract some machine specific parameters
  [ARM] 3561/1: Poodle: Correct the MMC/SD power control
  [ARM] 3593/1: Add reboot and shutdown handlers for Zaurus handhelds
  [ARM] 3599/1: AT91RM9200 remove global variables
  [ARM] 3607/1: AT91RM9200 misc fixes
  [ARM] 3605/1: AT91RM9200 Power Management
  [ARM] 3604/1: AT91RM9200 New boards
  [ARM] 3603/1: AT91RM9200 remove old files
  [ARM] 3592/1: AT91RM9200 Serial driver update
  [ARM] 3590/1: AT91RM9200 Platform devices support
  [ARM] 3589/1: AT91RM9200 DK/EK board update
  [ARM] 3588/1: AT91RM9200 CSB337/637 board update
  [ARM] 3587/1: AT91RM9200 hardware headers
  [ARM] 3586/1: AT91RM9200 header update
  ...

13 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Wed, 21 Jun 2006 00:39:53 +0000]
Merge /pub/scm/linux/kernel/git/davem/net-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [ATM]: fix broken uses of NIPQUAD in net/atm
  [SCTP]: sctp_unpack_cookie() fix
  [SCTP]: Fix unintentional change to SCTP_ASSERT when !SCTP_DEBUG
  [NET]: Prevent multiple qdisc runs
  [CONNECTOR]: Initialize subsystem earlier.
  [NETFILTER]: xt_sctp: fix endless loop caused by 0 chunk length

13 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6
Linus Torvalds [Wed, 21 Jun 2006 00:39:28 +0000]
Merge /pub/scm/linux/kernel/git/davem/sparc-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC64]: Update defconfig.
  [SPARC64]: Don't double-export synchronize_irq.
  [SPARC64]: Move over to GENERIC_HARDIRQS.
  [SPARC64]: Virtualize IRQ numbers.
  [SPARC64]: Kill ino_bucket->pil
  [SPARC]: Kill __irq_itoa().
  [SPARC64]: bp->pil can never be zero
  [SPARC64]: Send all device interrupts via one PIL.
  [SPARC]: Fix iommu_flush_iotlb end address
  [SPARC]: Mark smp init functions as cpuinit
  [SPARC]: Add missing rw can_lock macros
  [SPARC]: Setup cpu_possible_map
  [SPARC]: Add topology_init()

13 years agoMerge branch 'rio.b19' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/bird
Linus Torvalds [Tue, 20 Jun 2006 22:38:12 +0000]
Merge branch 'rio.b19' of git://git./linux/kernel/git/viro/bird

* 'rio.b19' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/bird:
  [PATCH] missing readb/readw in rio
  [PATCH] copy_to_user() from iomem is a bad thing
  [PATCH] forgotten swap of copyout() arguments
  [PATCH] handling rio MEMDUMP
  [PATCH] fix rio_copy_to_card() for OLDPCI case
  [PATCH] uses of ->Copy() in rioroute are bogus
  [PATCH] bogus order of copy_from_user() arguments
  [PATCH] rio ->Copy() expects the sourse as first argument
  [PATCH] trivial annotations in rio

13 years agoMerge branch 'audit.b21' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit...
Linus Torvalds [Tue, 20 Jun 2006 22:37:56 +0000]
Merge branch 'audit.b21' of git://git./linux/kernel/git/viro/audit-current

* 'audit.b21' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current: (25 commits)
  [PATCH] make set_loginuid obey audit_enabled
  [PATCH] log more info for directory entry change events
  [PATCH] fix AUDIT_FILTER_PREPEND handling
  [PATCH] validate rule fields' types
  [PATCH] audit: path-based rules
  [PATCH] Audit of POSIX Message Queue Syscalls v.2
  [PATCH] fix se_sen audit filter
  [PATCH] deprecate AUDIT_POSSBILE
  [PATCH] inline more audit helpers
  [PATCH] proc_loginuid_write() uses simple_strtoul() on non-terminated array
  [PATCH] update of IPC audit record cleanup
  [PATCH] minor audit updates
  [PATCH] fix audit_krule_to_{rule,data} return values
  [PATCH] add filtering by ppid
  [PATCH] log ppid
  [PATCH] collect sid of those who send signals to auditd
  [PATCH] execve argument logging
  [PATCH] fix deadlocks in AUDIT_LIST/AUDIT_LIST_RULES
  [PATCH] audit_panic() is audit-internal
  [PATCH] inotify (5/5): update kernel documentation
  ...

Manual fixup of conflict in unclude/linux/inotify.h

13 years ago[ARM] Fix tosa build error
Russell King [Tue, 20 Jun 2006 22:27:37 +0000]
[ARM] Fix tosa build error

tosa.c references mdelay(), but was missing linux/delay.h

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years agoMerge git://git.infradead.org/hdrcleanup-2.6
Linus Torvalds [Tue, 20 Jun 2006 22:10:08 +0000]
Merge git://git.infradead.org/hdrcleanup-2.6

* git://git.infradead.org/hdrcleanup-2.6: (63 commits)
  [S390] __FD_foo definitions.
  Switch to __s32 types in joystick.h instead of C99 types for consistency.
  Add <sys/types.h> to headers included for userspace in <linux/input.h>
  Move inclusion of <linux/compat.h> out of user scope in asm-x86_64/mtrr.h
  Remove struct fddi_statistics from user view in <linux/if_fddi.h>
  Move user-visible parts of drivers/s390/crypto/z90crypt.h to include/asm-s390
  Revert include/media changes: Mauro says those ioctls are only used in-kernel(!)
  Include <linux/types.h> and use __uXX types in <linux/cramfs_fs.h>
  Use __uXX types in <linux/i2o_dev.h>, include <linux/ioctl.h> too
  Remove private struct dx_hash_info from public view in <linux/ext3_fs.h>
  Include <linux/types.h> and use __uXX types in <linux/affs_hardblocks.h>
  Use __uXX types in <linux/divert.h> for struct divert_blk et al.
  Use __u32 for elf_addr_t in <asm-powerpc/elf.h>, not u32. It's user-visible.
  Remove PPP_FCS from user view in <linux/ppp_defs.h>, remove __P mess entirely
  Use __uXX types in user-visible structures in <linux/nbd.h>
  Don't use 'u32' in user-visible struct ip_conntrack_old_tuple.
  Use __uXX types for S390 DASD volume label definitions which are user-visible
  S390 BIODASDREADCMB ioctl should use __u64 not u64 type.
  Remove unneeded inclusion of <linux/time.h> from <linux/ufs_fs.h>
  Fix private integer types used in V4L2 ioctls.
  ...

Manually resolve conflict in include/linux/mtd/physmap.h

13 years agoMerge git://git.infradead.org/~dwmw2/rbtree-2.6
Linus Torvalds [Tue, 20 Jun 2006 21:51:22 +0000]
Merge git://git.infradead.org/~dwmw2/rbtree-2.6

* git://git.infradead.org/~dwmw2/rbtree-2.6:
  [RBTREE] Switch rb_colour() et al to en_US spelling of 'color' for consistency
  Update UML kernel/physmem.c to use rb_parent() accessor macro
  [RBTREE] Update hrtimers to use rb_parent() accessor macro.
  [RBTREE] Add explicit alignment to sizeof(long) for struct rb_node.
  [RBTREE] Merge colour and parent fields of struct rb_node.
  [RBTREE] Remove dead code in rb_erase()
  [RBTREE] Update JFFS2 to use rb_parent() accessor macro.
  [RBTREE] Update eventpoll.c to use rb_parent() accessor macro.
  [RBTREE] Update key.c to use rb_parent() accessor macro.
  [RBTREE] Update ext3 to use rb_parent() accessor macro.
  [RBTREE] Change rbtree off-tree marking in I/O schedulers.
  [RBTREE] Add accessor macros for colour and parent fields of rb_node

13 years agoMerge git://git.infradead.org/mtd-2.6
Linus Torvalds [Tue, 20 Jun 2006 21:50:31 +0000]
Merge git://git.infradead.org/mtd-2.6

* git://git.infradead.org/mtd-2.6: (199 commits)
  [MTD] NAND: Fix breakage all over the place
  [PATCH] NAND: fix remaining OOB length calculation
  [MTD] NAND Fixup NDFC merge brokeness
  [MTD NAND] S3C2410 driver cleanup
  [MTD NAND] s3c24x0 board: Fix clock handling, ensure proper initialisation.
  [JFFS2] Check CRC32 on dirent and data nodes each time they're read
  [JFFS2] When retiring nextblock, allocate a node_ref for the wasted space
  [JFFS2] Mark XATTR support as experimental, for now
  [JFFS2] Don't trust node headers before the CRC is checked.
  [MTD] Restore MTD_ROM and MTD_RAM types
  [MTD] assume mtd->writesize is 1 for NOR flashes
  [MTD NAND] Fix s3c2410 NAND driver so it at least _looks_ like it compiles
  [MTD] Prepare physmap for 64-bit-resources
  [JFFS2] Fix more breakage caused by janitorial meddling.
  [JFFS2] Remove stray __exit from jffs2_compressors_exit()
  [MTD] Allow alternate JFFS2 mount variant for root filesystem.
  [MTD] Disconnect struct mtd_info from ABI
  [MTD] replace MTD_RAM with MTD_GENERIC_TYPE
  [MTD] replace MTD_ROM with MTD_GENERIC_TYPE
  [MTD] remove a forgotten MTD_XIP
  ...

13 years agoMerge master.kernel.org:/home/rmk/linux-2.6-serial
Linus Torvalds [Tue, 20 Jun 2006 21:49:45 +0000]
Merge master.kernel.org:/home/rmk/linux-2.6-serial

* master.kernel.org:/home/rmk/linux-2.6-serial:
  [SERIAL] PARPORT_SERIAL should depend on SERIAL_8250_PCI

13 years agoMerge master.kernel.org:/home/rmk/linux-2.6-mmc
Linus Torvalds [Tue, 20 Jun 2006 21:49:29 +0000]
Merge master.kernel.org:/home/rmk/linux-2.6-mmc

* master.kernel.org:/home/rmk/linux-2.6-mmc:
  [MMC] Add (MMC) to entry in MAINTAINERS file
  [MMC] sdhci truncated pointer fix

13 years agoMerge master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Tue, 20 Jun 2006 21:49:00 +0000]
Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm: (22 commits)
  [ARM] 3559/1: S3C2442: core and serial port
  [ARM] 3557/1: S3C24XX: centralise and cleanup uart registration
  [ARM] 3558/1: SMDK24XX: LED platform devices
  [ARM] 3534/1: add spi support to lubbock platform
  [ARM] 3554/1: ARM: Fix dyntick locking
  [ARM] 3553/1: S3C24XX: earlier print of cpu idcode info
  [ARM] 3552/1: S3C24XX: Move VA of GPIO for low-level debug
  [ARM] 3551/1: S3C24XX: PM code failes to compile with CONFIG_DCACHE_WRITETHROUGH
  [ARM] 3550/1: OSIRIS: fix serial port map for 1:1
  [ARM] 3548/1: Fix the ARMv6 CPU id in compressed/head.S
  [ARM] 3335/1: Old-abi Thumb sys_syscall broken
  [ARM] 3467/1: [3/3] Support for Philips PNX4008 platform: defconfig
  [ARM] 3466/1: [2/3] Support for Philips PNX4008 platform: chip support
  [ARM] 3465/1: [1/3] Support for Philips PNX4008 platform: headers
  [ARM] 3407/1: lpd7x: documetation update
  [ARM] 3406/1: lpd7x: compilation fix for smc91x
  [ARM] 3405/1: lpd7a40x: CPLD ssp driver
  [ARM] 3404/1: lpd7a40x: AMBA CLCD support
  [ARM] 3403/1: lpd7a40x: updated default configurations
  [ARM] 3402/1: lpd7a40x: serial driver bug fix
  ...

13 years ago[ARM] 3610/1: Make reboot work on Versatile
Deepak Saxena [Tue, 20 Jun 2006 20:30:44 +0000]
[ARM] 3610/1: Make reboot work on Versatile

Patch from Deepak Saxena

This patch makes soft reboot work on the Versatile board. Thanks to
Catalin Marinas @ ARM for pointing out the proper way to do this.

Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years agoMerge S3Cxxxx branch
Russell King [Tue, 20 Jun 2006 19:57:34 +0000]
Merge S3Cxxxx branch

13 years ago[MTD] NAND: Fix breakage all over the place
Thomas Gleixner [Tue, 20 Jun 2006 18:05:05 +0000]
[MTD] NAND: Fix breakage all over the place

Following problems are addressed:

- wrong status caused early break out of nand_wait()
- removed the bogus status check in nand_wait() which
  is a relict of the abandoned support for interrupted
  erase.
- status check moved to the correct place in read_oob
- oob support for syndrom based ecc with strange layouts
- use given offset in the AUTOOOB based oob operations

Partially based on a patch from Vitaly Vool <vwool@ru.mvista.com>
Thanks to Savin Zlobec <savin@epico.si> for tracking down the
status problem.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

13 years ago[PATCH] NAND: fix remaining OOB length calculation
Vitaly Wool [Wed, 7 Jun 2006 05:34:37 +0000]
[PATCH] NAND: fix remaining OOB length calculation

In nand_read_page_syndrome/nand_write_page_syndrome the calculation of
the remaining oob length which is not used by the prepad/ecc/postpad
areas is wrong.

Signed-off-by: Vitaly Wool <vwool@ru.mvista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

13 years ago[MTD] NAND Fixup NDFC merge brokeness
Thomas Gleixner [Fri, 16 Jun 2006 16:10:09 +0000]
[MTD] NAND Fixup NDFC merge brokeness

Remove the remains of a broken merge.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

13 years ago[ARM] Include asm/hardware.h not asm/arch/hardware.h
Russell King [Tue, 20 Jun 2006 18:53:16 +0000]
[ARM] Include asm/hardware.h not asm/arch/hardware.h

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years agoMerge Zaurus branch
Russell King [Tue, 20 Jun 2006 18:49:07 +0000]
Merge Zaurus branch

13 years agoMerge AT91 branch
Russell King [Tue, 20 Jun 2006 18:48:18 +0000]
Merge AT91 branch

13 years ago[ARM] 3599/1: AT91RM9200 remove global variables
Andrew Victor [Tue, 20 Jun 2006 18:31:39 +0000]
[ARM] 3599/1: AT91RM9200 remove global variables

Patch from Andrew Victor

This patch removes some now unnecessary global variables -
at91_master_clock, at91_serial_map, at91_console_port.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] 3609/1: S3C24XX: defconfig update for s3c2410_defconfig
Ben Dooks [Tue, 20 Jun 2006 18:31:06 +0000]
[ARM] 3609/1: S3C24XX: defconfig update for s3c2410_defconfig

Patch from Ben Dooks

Update s3c2410_defconfig to latest kernel with the
latest patches

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] 3607/1: AT91RM9200 misc fixes
Andrew Victor [Tue, 20 Jun 2006 18:30:20 +0000]
[ARM] 3607/1: AT91RM9200 misc fixes

Patch from Andrew Victor

This final patch includes some general fixes.

1. Link in pm.o if CONFIG_PM is enabled.  [Should have been included in
patch 3605/1].
2. Use __raw_readl()/__raw_writel() when accessing System Peripheral
registers.
3. Removed some unnecessary includes

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] 3605/1: AT91RM9200 Power Management
Andrew Victor [Tue, 20 Jun 2006 18:30:19 +0000]
[ARM] 3605/1: AT91RM9200 Power Management

Patch from Andrew Victor

This patch adds the core Power Management support for the AT91RM9200
processor.  It will support suspend-to-RAM and standby modes.

The suspend-to-RAM functionality is not 100% complete.  The code that
needs to be execute from the internal SRAM to restore the system is
outstanding.  For now we just fall through to Standby mode.

The AT91-specific at91_suspend_entering_slow_clock() function will
eventually be replaced by clk_must_disable() once that functionality is
added to mainline clock API.

Patch from David Brownell.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] 3604/1: AT91RM9200 New boards
Andrew Victor [Tue, 20 Jun 2006 18:30:18 +0000]
[ARM] 3604/1: AT91RM9200 New boards

Patch from Andrew Victor

This patch adds support for an additional 4 AT91RM9200-based boards:

1. Conitec ARM&EVA  [MACH_CARMEVA]
   (http://www.conitec.net/english/linuxboard.htm)

2. KwikByte KB920x  [MACH_KB9200]
   (http://kwikbyte.com/KB9202_description_new.htm)

3. Embest ATEB9200  [MACH_ATEB9200]
   (http://www.embedinfo.com/english/product/ATEB9200.asp)

4. Sperry-Sun KAFA board  [MACH_KAFA]
   (unknown)

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] 3603/1: AT91RM9200 remove old files
Andrew Victor [Tue, 20 Jun 2006 18:27:34 +0000]
[ARM] 3603/1: AT91RM9200 remove old files

Patch from Andrew Victor

This patch removes the now unnecessary
include/asm-arm/arch-at91rm9200/pio.h file.  The pin configuration is
now handled in the platform-device setup code
(arch/arm/mach-at91rm9200/devices.c).

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] 3606/1: PXA27x SSP Register definitions
Liam Girdwood [Tue, 20 Jun 2006 18:26:42 +0000]
[ARM] 3606/1: PXA27x SSP Register definitions

Patch from Liam Girdwood

This patch adds some new PXA27x SSP port registers and also fixes the
SSP slots per frame macro

Changes:-

 o SSCR0_SlotPerFrm fixed
 o Added SSP port TSA, RSA, TSS and ACD registers

Signed-off-by: Liam Girdwood <liam.girdwood@wolfsonmicro.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] 3602/1: ixp23xx: fix two typos
Lennert Buytenhek [Tue, 20 Jun 2006 18:26:41 +0000]
[ARM] 3602/1: ixp23xx: fix two typos

Patch from Lennert Buytenhek

Fix two typos in include/asm-arm/arch-ixp23xx.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ATM]: fix broken uses of NIPQUAD in net/atm
Al Viro [Tue, 20 Jun 2006 10:27:27 +0000]
[ATM]: fix broken uses of NIPQUAD in net/atm

NIPQUAD expects an l-value of type __be32, _NOT_ a pointer to __be32.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

13 years ago[SCTP]: sctp_unpack_cookie() fix
Al Viro [Tue, 20 Jun 2006 10:26:14 +0000]
[SCTP]: sctp_unpack_cookie() fix

sizeof(pointer) != sizeof(array)...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

13 years ago[PATCH] make set_loginuid obey audit_enabled
Steve Grubb [Mon, 12 Jun 2006 11:48:28 +0000]
[PATCH] make set_loginuid obey audit_enabled

Hi,

I was doing some testing and noticed that when the audit system was disabled,
I was still getting messages about the loginuid being set. The following patch
makes audit_set_loginuid look at in_syscall to determine if it should create
an audit event. The loginuid will continue to be set as long as there is a context.

Signed-off-by: Steve Grubb <sgrubb@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

13 years ago[PATCH] log more info for directory entry change events
Amy Griffis [Fri, 9 Jun 2006 03:19:31 +0000]
[PATCH] log more info for directory entry change events

When an audit event involves changes to a directory entry, include
a PATH record for the directory itself.  A few other notable changes:

    - fixed audit_inode_child() hooks in fsnotify_move()
    - removed unused flags arg from audit_inode()
    - added audit log routines for logging a portion of a string

Here's some sample output.

before patch:
type=SYSCALL msg=audit(1149821605.320:26): arch=40000003 syscall=39 success=yes exit=0 a0=bf8d3c7c a1=1ff a2=804e1b8 a3=bf8d3c7c items=1 ppid=739 pid=800 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=ttyS0 comm="mkdir" exe="/bin/mkdir" subj=root:system_r:unconfined_t:s0-s0:c0.c255
type=CWD msg=audit(1149821605.320:26):  cwd="/root"
type=PATH msg=audit(1149821605.320:26): item=0 name="foo" parent=164068 inode=164010 dev=03:00 mode=040755 ouid=0 ogid=0 rdev=00:00 obj=root:object_r:user_home_t:s0

after patch:
type=SYSCALL msg=audit(1149822032.332:24): arch=40000003 syscall=39 success=yes exit=0 a0=bfdd9c7c a1=1ff a2=804e1b8 a3=bfdd9c7c items=2 ppid=714 pid=777 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=ttyS0 comm="mkdir" exe="/bin/mkdir" subj=root:system_r:unconfined_t:s0-s0:c0.c255
type=CWD msg=audit(1149822032.332:24):  cwd="/root"
type=PATH msg=audit(1149822032.332:24): item=0 name="/root" inode=164068 dev=03:00 mode=040750 ouid=0 ogid=0 rdev=00:00 obj=root:object_r:user_home_dir_t:s0
type=PATH msg=audit(1149822032.332:24): item=1 name="foo" inode=164010 dev=03:00 mode=040755 ouid=0 ogid=0 rdev=00:00 obj=root:object_r:user_home_t:s0

Signed-off-by: Amy Griffis <amy.griffis@hp.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

13 years ago[PATCH] fix AUDIT_FILTER_PREPEND handling
Amy Griffis [Fri, 2 Jun 2006 17:16:01 +0000]
[PATCH] fix AUDIT_FILTER_PREPEND handling

Clear AUDIT_FILTER_PREPEND flag after adding rule to list.  This
fixes three problems when a rule is added with the -A syntax:

    - auditctl displays filter list as "(null)"
    - the rule cannot be removed using -d
    - a duplicate rule can be added with -a

Signed-off-by: Amy Griffis <amy.griffis@hp.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

13 years ago[PATCH] validate rule fields' types
Al Viro [Mon, 5 Jun 2006 12:15:59 +0000]
[PATCH] validate rule fields' types

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

13 years ago[PATCH] audit: path-based rules
Amy Griffis [Fri, 7 Apr 2006 20:55:56 +0000]
[PATCH] audit: path-based rules

In this implementation, audit registers inotify watches on the parent
directories of paths specified in audit rules.  When audit's inotify
event handler is called, it updates any affected rules based on the
filesystem event.  If the parent directory is renamed, removed, or its
filesystem is unmounted, audit removes all rules referencing that
inotify watch.

To keep things simple, this implementation limits location-based
auditing to the directory entries in an existing directory.  Given
a path-based rule for /foo/bar/passwd, the following table applies:

    passwd modified -- audit event logged
    passwd replaced -- audit event logged, rules list updated
    bar renamed     -- rule removed
    foo renamed     -- untracked, meaning that the rule now applies to
       the new location

Audit users typically want to have many rules referencing filesystem
objects, which can significantly impact filtering performance.  This
patch also adds an inode-number-based rule hash to mitigate this
situation.

The patch is relative to the audit git tree:
http://kernel.org/git/?p=linux/kernel/git/viro/audit-current.git;a=summary
and uses the inotify kernel API:
http://lkml.org/lkml/2006/6/1/145

Signed-off-by: Amy Griffis <amy.griffis@hp.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

13 years ago[PATCH] Audit of POSIX Message Queue Syscalls v.2
George C. Wilson [Wed, 24 May 2006 21:09:55 +0000]
[PATCH] Audit of POSIX Message Queue Syscalls v.2

This patch adds audit support to POSIX message queues.  It applies cleanly to
the lspp.b15 branch of Al Viro's git tree.  There are new auxiliary data
structures, and collection and emission routines in kernel/auditsc.c.  New hooks
in ipc/mqueue.c collect arguments from the syscalls.

I tested the patch by building the examples from the POSIX MQ library tarball.
Build them -lrt, not against the old MQ library in the tarball.  Here's the URL:
http://www.geocities.com/wronski12/posix_ipc/libmqueue-4.41.tar.gz
Do auditctl -a exit,always -S for mq_open, mq_timedsend, mq_timedreceive,
mq_notify, mq_getsetattr.  mq_unlink has no new hooks.  Please see the
corresponding userspace patch to get correct output from auditd for the new
record types.

[fixes folded]

Signed-off-by: George Wilson <ltcgcw@us.ibm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

13 years ago[PATCH] fix se_sen audit filter
Darrel Goeddel [Wed, 24 May 2006 14:38:25 +0000]
[PATCH] fix se_sen audit filter

Fix a broken comparison that causes the process clearance to be checked for
both se_clr and se_sen audit filters.

Signed-off-by: Darrel Goeddel <dgoeddel@trustedcs.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

13 years ago[PATCH] deprecate AUDIT_POSSBILE
Al Viro [Tue, 23 May 2006 05:36:13 +0000]
[PATCH] deprecate AUDIT_POSSBILE

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

13 years ago[PATCH] inline more audit helpers
Al Viro [Thu, 18 May 2006 20:01:30 +0000]
[PATCH] inline more audit helpers

pull checks for ->audit_context into inlined wrappers

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

13 years ago[PATCH] proc_loginuid_write() uses simple_strtoul() on non-terminated array
Al Viro [Thu, 18 May 2006 12:28:02 +0000]
[PATCH] proc_loginuid_write() uses simple_strtoul() on non-terminated array

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

13 years ago[PATCH] update of IPC audit record cleanup
Linda Knippers [Wed, 17 May 2006 02:03:48 +0000]
[PATCH] update of IPC audit record cleanup

The following patch addresses most of the issues with the IPC_SET_PERM
records as described in:
https://www.redhat.com/archives/linux-audit/2006-May/msg00010.html
and addresses the comments I received on the record field names.

To summarize, I made the following changes:

1. Changed sys_msgctl() and semctl_down() so that an IPC_SET_PERM
   record is emitted in the failure case as well as the success case.
   This matches the behavior in sys_shmctl().  I could simplify the
   code in sys_msgctl() and semctl_down() slightly but it would mean
   that in some error cases we could get an IPC_SET_PERM record
   without an IPC record and that seemed odd.

2. No change to the IPC record type, given no feedback on the backward
   compatibility question.

3. Removed the qbytes field from the IPC record.  It wasn't being
   set and when audit_ipc_obj() is called from ipcperms(), the
   information isn't available.  If we want the information in the IPC
   record, more extensive changes will be necessary.  Since it only
   applies to message queues and it isn't really permission related, it
   doesn't seem worth it.

4. Removed the obj field from the IPC_SET_PERM record.  This means that
   the kern_ipc_perm argument is no longer needed.

5. Removed the spaces and renamed the IPC_SET_PERM field names.  Replaced iuid and
   igid fields with ouid and ogid in the IPC record.

I tested this with the lspp.22 kernel on an x86_64 box.  I believe it
applies cleanly on the latest kernel.

-- ljk

Signed-off-by: Linda Knippers <linda.knippers@hp.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

13 years ago[PATCH] minor audit updates
Serge E. Hallyn [Thu, 27 Apr 2006 21:45:14 +0000]
[PATCH] minor audit updates

Just a few minor proposed updates.  Only the last one will
actually affect behavior.  The rest are just misleading
code.

Several AUDIT_SET functions return 'old' value, but only
return value <0 is checked for.  So just return 0.

propagate audit_set_rate_limit and audit_set_backlog_limit
error values

In audit_buffer_free, the audit_freelist_count was being
incremented even when we discard the return buffer, so
audit_freelist_count can end up wrong.  This could cause
the actual freelist to shrink over time, eventually
threatening to degrate audit performance.

Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

13 years ago[PATCH] fix audit_krule_to_{rule,data} return values
Amy Griffis [Tue, 2 May 2006 19:06:01 +0000]
[PATCH] fix audit_krule_to_{rule,data} return values

Don't return -ENOMEM when callers of these functions are checking for
a NULL return.  Bug noticed by Serge Hallyn.

Signed-off-by: Amy Griffis <amy.griffis@hp.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

13 years ago[PATCH] add filtering by ppid
Al Viro [Sat, 6 May 2006 12:26:27 +0000]
[PATCH] add filtering by ppid

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

13 years ago[PATCH] log ppid
Al Viro [Sat, 6 May 2006 12:22:52 +0000]
[PATCH] log ppid

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

13 years ago[PATCH] collect sid of those who send signals to auditd
Al Viro [Thu, 25 May 2006 14:19:47 +0000]
[PATCH] collect sid of those who send signals to auditd

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

13 years ago[PATCH] execve argument logging
Al Viro [Wed, 26 Apr 2006 18:04:08 +0000]
[PATCH] execve argument logging

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

13 years ago[PATCH] fix deadlocks in AUDIT_LIST/AUDIT_LIST_RULES
Al Viro [Mon, 22 May 2006 05:09:24 +0000]
[PATCH] fix deadlocks in AUDIT_LIST/AUDIT_LIST_RULES

We should not send a pile of replies while holding audit_netlink_mutex
since we hold the same mutex when we receive commands.  As the result,
we can get blocked while sending and sit there holding the mutex while
auditctl is unable to send the next command and get around to receiving
what we'd sent.

Solution: create skb and put them into a queue instead of sending;
once we are done, send what we've got on the list.  The former can
be done synchronously while we are handling AUDIT_LIST or AUDIT_LIST_RULES;
we are holding audit_netlink_mutex at that point.  The latter is done
asynchronously and without messing with audit_netlink_mutex.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

13 years ago[PATCH] audit_panic() is audit-internal
Al Viro [Mon, 22 May 2006 05:36:34 +0000]
[PATCH] audit_panic() is audit-internal

... no need to provide a stub; note that extern is already gone from
include/linux/audit.h

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

13 years ago[PATCH] inotify (5/5): update kernel documentation
Amy Griffis [Thu, 1 Jun 2006 20:11:07 +0000]
[PATCH] inotify (5/5): update kernel documentation

Update kernel documentation to include a description of the inotify
kernel API.

Signed-off-by: Amy Griffis <amy.griffis@hp.com>
Acked-by: Robert Love <rml@novell.com>
Acked-by: John McCutchan <john@johnmccutchan.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

13 years ago[PATCH] inotify (4/5): allow watch removal from event handler
Amy Griffis [Thu, 1 Jun 2006 20:11:05 +0000]
[PATCH] inotify (4/5): allow watch removal from event handler

Allow callers to remove watches from their event handler via
inotify_remove_watch_locked().  This functionality can be used to
achieve IN_ONESHOT-like functionality for a subset of events in the
mask.

Signed-off-by: Amy Griffis <amy.griffis@hp.com>
Acked-by: Robert Love <rml@novell.com>
Acked-by: John McCutchan <john@johnmccutchan.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

13 years ago[PATCH] inotify (3/5): add interfaces to kernel API
Amy Griffis [Thu, 1 Jun 2006 20:11:03 +0000]
[PATCH] inotify (3/5): add interfaces to kernel API

Add inotify_init_watch() so caller can use inotify_watch refcounts
before calling inotify_add_watch().

Add inotify_find_watch() to find an existing watch for an (ih,inode)
pair.  This is similar to inotify_find_update_watch(), but does not
update the watch's mask if one is found.

Add inotify_rm_watch() to remove a watch via the watch pointer instead
of the watch descriptor.

Signed-off-by: Amy Griffis <amy.griffis@hp.com>
Acked-by: Robert Love <rml@novell.com>
Acked-by: John McCutchan <john@johnmccutchan.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

13 years ago[PATCH] inotify (2/5): add name's inode to event handler
Amy Griffis [Thu, 1 Jun 2006 20:11:01 +0000]
[PATCH] inotify (2/5): add name's inode to event handler

When an inotify event includes a dentry name, also include the inode
associated with that name.

Signed-off-by: Amy Griffis <amy.griffis@hp.com>
Acked-by: Robert Love <rml@novell.com>
Acked-by: John McCutchan <john@johnmccutchan.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

13 years ago[PATCH] inotify (1/5): split kernel API from userspace support
Amy Griffis [Thu, 1 Jun 2006 20:10:59 +0000]
[PATCH] inotify (1/5): split kernel API from userspace support

The following series of patches introduces a kernel API for inotify,
making it possible for kernel modules to benefit from inotify's
mechanism for watching inodes.  With these patches, inotify will
maintain for each caller a list of watches (via an embedded struct
inotify_watch), where each inotify_watch is associated with a
corresponding struct inode.  The caller registers an event handler and
specifies for which filesystem events their event handler should be
called per inotify_watch.

Signed-off-by: Amy Griffis <amy.griffis@hp.com>
Acked-by: Robert Love <rml@novell.com>
Acked-by: John McCutchan <john@johnmccutchan.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

13 years ago[PATCH] remove config.h from inotify.h
Al Viro [Fri, 2 Jun 2006 01:39:38 +0000]
[PATCH] remove config.h from inotify.h

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

13 years ago[SPARC64]: Update defconfig.
David S. Miller [Tue, 20 Jun 2006 08:27:08 +0000]
[SPARC64]: Update defconfig.

Signed-off-by: David S. Miller <davem@davemloft.net>

13 years ago[SPARC64]: Don't double-export synchronize_irq.
David S. Miller [Tue, 20 Jun 2006 08:23:56 +0000]
[SPARC64]: Don't double-export synchronize_irq.

It is done by the generic IRQ layer now.

Signed-off-by: David S. Miller <davem@davemloft.net>

13 years ago[SPARC64]: Move over to GENERIC_HARDIRQS.
David S. Miller [Tue, 20 Jun 2006 08:23:32 +0000]
[SPARC64]: Move over to GENERIC_HARDIRQS.

This is the long overdue conversion of sparc64 over to
the generic IRQ layer.

The kernel image is slightly larger, but the BSS is ~60K
smaller due to the reduced size of struct ino_bucket.

A lot of IRQ implementation details, including ino_bucket,
were moved out of asm-sparc64/irq.h and are now private to
arch/sparc64/kernel/irq.c, and most of the code in irq.c
totally disappeared.

One thing that's different at the moment is IRQ distribution,
we do it at enable_irq() time.  If the cpu mask is ALL then
we round-robin using a global rotating cpu counter, else
we pick the first cpu in the mask to support single cpu
targetting.  This is similar to what powerpc's XICS IRQ
support code does.

This works fine on my UP SB1000, and the SMP build goes
fine and runs on that machine, but lots of testing on
different setups is needed.

Signed-off-by: David S. Miller <davem@davemloft.net>

13 years ago[SPARC64]: Virtualize IRQ numbers.
David S. Miller [Tue, 20 Jun 2006 08:22:35 +0000]
[SPARC64]: Virtualize IRQ numbers.

Inspired by PowerPC XICS interrupt support code.

All IRQs are virtualized in order to keep NR_IRQS from needing
to be too large.  Interrupts on sparc64 are arbitrary 11-bit
values, but we don't need to define NR_IRQS to 2048 if we
virtualize the IRQs.

As PCI and SBUS controller drivers build device IRQs, we divy
out virtual IRQ numbers incrementally starting at 1.  Zero is
a special virtual IRQ used for the timer interrupt.

So device drivers all see virtual IRQs, and all the normal
interfaces such as request_irq(), enable_irq(), etc. translate
that into a real IRQ number in order to configure the IRQ.

At this point knowledge of the struct ino_bucket is almost
entirely contained within arch/sparc64/kernel/irq.c  There are
a few small bits in the PCI controller drivers that need to
be swept away before we can remove ino_bucket's definition
out of asm-sparc64/irq.h and privately into kernel/irq.c

Signed-off-by: David S. Miller <davem@davemloft.net>

13 years ago[SPARC64]: Kill ino_bucket->pil
David S. Miller [Tue, 20 Jun 2006 08:21:57 +0000]
[SPARC64]: Kill ino_bucket->pil

And reuse that struct member for virt_irq, which will
be used in future changesets for the implementation of
mapping between real and virtual IRQ numbers.

This nicely kills off a ton of SBUS and PCI controller
PIL assignment code which is no longer necessary.

Signed-off-by: David S. Miller <davem@davemloft.net>

13 years ago[SPARC]: Kill __irq_itoa().
David S. Miller [Tue, 20 Jun 2006 08:21:29 +0000]
[SPARC]: Kill __irq_itoa().

This ugly hack was long overdue to die.

It was a way to print out Sparc interrupts in a more freindly format,
since IRQ numbers were arbitrary opaque 32-bit integers which vectored
into PIL levels.  These 32-bit integers were not necessarily in the
0-->NR_IRQS range, but the PILs they vectored to were.

The idea now is that we will increase NR_IRQS a little bit and use a
virtual<-->real IRQ number mapping scheme similar to PowerPC.

That makes this IRQ printing hack irrelevant, and furthermore only a
handful of drivers actually used __irq_itoa() making it even less
useful.

Signed-off-by: David S. Miller <davem@davemloft.net>

13 years ago[SPARC64]: bp->pil can never be zero
David S. Miller [Tue, 20 Jun 2006 08:20:30 +0000]
[SPARC64]: bp->pil can never be zero

Only pil0_dummy_bucket had a pil of zero and we just killed that
off, so we can delete all special case code that used bp->pil==0
as a way to identify a dummy bucket.

Signed-off-by: David S. Miller <davem@davemloft.net>

13 years ago[SPARC64]: Send all device interrupts via one PIL.
David S. Miller [Tue, 20 Jun 2006 08:20:00 +0000]
[SPARC64]: Send all device interrupts via one PIL.

This is the first in a series of cleanups that will hopefully
allow a seamless attempt at using the generic IRQ handling
infrastructure in the Linux kernel.

Define PIL_DEVICE_IRQ and vector all device interrupts through
there.

Get rid of the ugly pil0_dummy_{bucket,desc}, instead vector
the timer interrupt directly to a specific handler since the
timer interrupt is the only event that will be signaled on
PIL 14.

The irq_worklist is now in the per-cpu trap_block[].

Signed-off-by: David S. Miller <davem@davemloft.net>

13 years ago[SPARC]: Fix iommu_flush_iotlb end address
Bob Breuer [Tue, 20 Jun 2006 07:36:56 +0000]
[SPARC]: Fix iommu_flush_iotlb end address

Fix the calculation of the end address when flushing iotlb entries to
ram.  This bug has been a cause of esp dma errors, and it affects
HyperSPARC systems much worse than SuperSPARC systems.

Signed-off-by: Bob Breuer <breuerr@mc.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

13 years ago[SPARC]: Mark smp init functions as cpuinit
Bob Breuer [Tue, 20 Jun 2006 07:36:10 +0000]
[SPARC]: Mark smp init functions as cpuinit

Fix the smp related section mismatch warnings by marking the smp init
functions as cpuinit.

Signed-off-by: Bob Breuer <breuerr@mc.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

13 years ago[SPARC]: Add missing rw can_lock macros
Bob Breuer [Tue, 20 Jun 2006 07:35:13 +0000]
[SPARC]: Add missing rw can_lock macros

Fix a link failure by adding the missing can_lock macros for the rw
locks.

Signed-off-by: Bob Breuer <breuerr@mc.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

13 years ago[SPARC]: Setup cpu_possible_map
Bob Breuer [Tue, 20 Jun 2006 07:30:31 +0000]
[SPARC]: Setup cpu_possible_map

Setup cpu_possible_map so the secondary cpus will get started.

Signed-off-by: Bob Breuer <breuerr@mc.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

13 years ago[SPARC]: Add topology_init()
Bob Breuer [Tue, 20 Jun 2006 07:28:33 +0000]
[SPARC]: Add topology_init()

Fix a crash in SMP mode by adding the missing topology_init.
Also makes /proc/cpuinfo backwards compatible with 2.4.

Signed-off-by: Bob Breuer <breuerr@mc.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

13 years ago[SCTP]: Fix unintentional change to SCTP_ASSERT when !SCTP_DEBUG
David S. Miller [Tue, 20 Jun 2006 07:07:52 +0000]
[SCTP]: Fix unintentional change to SCTP_ASSERT when !SCTP_DEBUG

A local debugging change slipped into a previous changeset.

When SCTP_DEBUG is off SCTP_ASSERT should do nothing.

Signed-off-by: David S. Miller <davem@davemloft.net>

13 years ago[NET]: Prevent multiple qdisc runs
Herbert Xu [Tue, 20 Jun 2006 06:57:59 +0000]
[NET]: Prevent multiple qdisc runs

Having two or more qdisc_run's contend against each other is bad because
it can induce packet reordering if the packets have to be requeued.  It
appears that this is an unintended consequence of relinquinshing the queue
lock while transmitting.  That in turn is needed for devices that spend a
lot of time in their transmit routine.

There are no advantages to be had as devices with queues are inherently
single-threaded (the loopback device is not but then it doesn't have a
queue).

Even if you were to add a queue to a parallel virtual device (e.g., bolt
a tbf filter in front of an ipip tunnel device), you would still want to
process the queue in sequence to ensure that the packets are ordered
correctly.

The solution here is to steal a bit from net_device to prevent this.

BTW, as qdisc_restart is no longer used by anyone as a module inside the
kernel (IIRC it used to with netif_wake_queue), I have not exported the
new __qdisc_run function.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

13 years ago[CONNECTOR]: Initialize subsystem earlier.
Evgeniy Polyakov [Tue, 20 Jun 2006 06:42:53 +0000]
[CONNECTOR]: Initialize subsystem earlier.

Attached patch declares connector init function as subsys_init()
and returns -EAGAIN in case connector is not initialized yet.

Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>

13 years ago[NETFILTER]: xt_sctp: fix endless loop caused by 0 chunk length
Patrick McHardy [Tue, 20 Jun 2006 06:39:45 +0000]
[NETFILTER]: xt_sctp: fix endless loop caused by 0 chunk length

Fix endless loop in the SCTP match similar to those already fixed in
the SCTP conntrack helper (was CVE-2006-1527).

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

13 years agoMerge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
Linus Torvalds [Tue, 20 Jun 2006 02:07:12 +0000]
Merge branch 'upstream' of git://ftp.linux-mips.org/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (51 commits)
  [MIPS] Make timer interrupt frequency configurable from kconfig.
  [MIPS] Correct HAL2 Kconfig description
  [MIPS] Fix R4K cache macro names
  [MIPS] Add Missing R4K Cache Macros to IP27 & IP32
  [MIPS] Support for the RM9000-based Basler eXcite smart camera platform.
  [MIPS] Support for the R5500-based NEC EMMA2RH Mark-eins board
  [MIPS] Support SNI RM200C SNI in big endian mode and R5000 processors.
  [MIPS] SN: include asm/sn/types.h for nasid_t.
  [MIPS] Random fixes for sb1250
  [MIPS] Fix bcm1480 compile
  [MIPS] Remove support for NEC DDB5476.
  [MIPS] Remove support for NEC DDB5074.
  [MIPS] Cleanup memory managment initialization.
  [MIPS] SN: Declare bridge_pci_ops.
  [MIPS] Remove unused function alloc_pci_controller.
  [MIPS] IP27: Extract pci_ops into separate file.
  [MIPS] IP27: Use symbolic constants instead of magic numbers.
  [MIPS] vr41xx: remove unnecessay items from vr41xx/Kconfig.
  [MIPS] IP27: Cleanup N/M mode configuration.
  [MIPS] IP27: Throw away old unused hacks.
  ...

13 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland...
Linus Torvalds [Tue, 20 Jun 2006 02:01:59 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/roland/infiniband

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (46 commits)
  IB/uverbs: Don't serialize with ib_uverbs_idr_mutex
  IB/mthca: Make all device methods truly reentrant
  IB/mthca: Fix memory leak on modify_qp error paths
  IB/uverbs: Factor out common idr code
  IB/uverbs: Don't decrement usecnt on error paths
  IB/uverbs: Release lock on error path
  IB/cm: Use address handle helpers
  IB/sa: Add ib_init_ah_from_path()
  IB: Add ib_init_ah_from_wc()
  IB/ucm: Get rid of duplicate P_Key parameter
  IB/srp: Factor out common request reset code
  IB/srp: Support SRP rev. 10 targets
  [SCSI] srp.h: Add I/O Class values
  IB/fmr: Use device's max_map_map_per_fmr attribute in FMR pool.
  IB/mthca: Fill in max_map_per_fmr device attribute
  IB/ipath: Add client reregister event generation
  IB/mthca: Add client reregister event generation
  IB: Move struct port_info from ipath to <rdma/ib_smi.h>
  IPoIB: Handle client reregister events
  IB: Add client reregister event type
  ...

13 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Tue, 20 Jun 2006 01:55:56 +0000]
Merge /pub/scm/linux/kernel/git/davem/net-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (109 commits)
  [ETHTOOL]: Fix UFO typo
  [SCTP]: Fix persistent slowdown in sctp when a gap ack consumes rx buffer.
  [SCTP]: Send only 1 window update SACK per message.
  [SCTP]: Don't do CRC32C checksum over loopback.
  [SCTP] Reset rtt_in_progress for the chunk when processing its sack.
  [SCTP]: Reject sctp packets with broadcast addresses.
  [SCTP]: Limit association max_retrans setting in setsockopt.
  [PFKEYV2]: Fix inconsistent typing in struct sadb_x_kmprivate.
  [IPV6]: Sum real space for RTAs.
  [IRDA]: Use put_unaligned() in irlmp_do_discovery().
  [BRIDGE]: Add support for NETIF_F_HW_CSUM devices
  [NET]: Add NETIF_F_GEN_CSUM and NETIF_F_ALL_CSUM
  [TG3]: Convert to non-LLTX
  [TG3]: Remove unnecessary tx_lock
  [TCP]: Add tcp_slow_start_after_idle sysctl.
  [BNX2]: Update version and reldate
  [BNX2]: Use CPU native page size
  [BNX2]: Use compressed firmware
  [BNX2]: Add firmware decompression
  [BNX2]: Allow WoL settings on new 5708 chips
  ...

Manual fixup for conflict in drivers/net/tulip/winbond-840.c

13 years agoMerge branch 'i915fb' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/intelf...
Linus Torvalds [Tue, 20 Jun 2006 01:53:20 +0000]
Merge branch 'i915fb' of git://git./linux/kernel/git/airlied/intelfb-2.6

* 'i915fb' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/intelfb-2.6: (25 commits)
  intelfb: fixup clock calculation debugging.
  Removed hard coded EDID buffer size.
  intelfb: use regular modedb table instead of VESA
  intelfb: use firmware EDID for mode database
  Revert "intelfb driver -- use the regular modedb table instead of the VESA"
  intelfb: int option fix
  sync modesetting code with X.org
  intelfb: align with changes from my X driver.
  intelfb driver -- use the regular modedb table instead of the VESA
  Adds support for 256MB aperture on 945 chipsets to the intelfb driver
  intelfb -- uses stride alignment of 64 on the 9xx chipsets.
  intelfb: some cleanups for intelfbhw
  intelfb: fixup pitch calculation like X does
  intelfb: fixup p calculation
  This patch makes a needlessly global struct static.
  intelfb: add i945GM support
  intelfb: fixup whitespace..
  intelfb: add hw cursor support for i9xx
  intelfb: make i915 modeset
  intelfb: add support for i945G
  ...

13 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/davej/agpgart
Linus Torvalds [Tue, 20 Jun 2006 01:51:41 +0000]
Merge /pub/scm/linux/kernel/git/davej/agpgart

* master.kernel.org:/pub/scm/linux/kernel/git/davej/agpgart:
  [AGPGART] alpha-agp warning fix
  [AGPGART] uninorth-agp warning fixes
  [AGPGART] Remove pointless initialisation in intel-agp
  [AGPGART] Remove pointless code from agp_generic_create_gatt_table()

13 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq
Linus Torvalds [Tue, 20 Jun 2006 01:51:21 +0000]
Merge /pub/scm/linux/kernel/git/davej/cpufreq

* master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ] sets nforce2 minimum PLL divider to 2.
  [CPUFREQ] Make powernow-k7 work on SMP kernels.
  [CPUFREQ] cpufreq core {d,}printk adjustments
  [CPUFREQ] dprintk adjustments to cpufreq-speedstep-centrino
  [CPUFREQ] dprintk adjustments to cpufreq-nforce2
  [CPUFREQ] Prepare powernow-k8 for future CPUs.
  [CPUFREQ] Make acpi-cpufreq 'sticky'.
  [CPUFREQ] Remove strange No-op from longrun.c
  [CPUFREQ] Remove more freq_table reinitialisations.
  [CPUFREQ] Fix another redundant initialisation in freq_table
  [CPUFREQ] Remove duplicate assignment in freq_table
  [CPUFREQ] CodingStyle nits in cpufreq_stats.c
  [CPUFREQ] Remove duplicate assignment from cpufreq-nforce2
  [CPUFREQ] Remove pointless reinitialisations in acpi-cpufreq
  [CPUFREQ] Remove pointless reinitialisation from powernow-k8
  [CPUFREQ] Remove redundant initialisation from longhaul.
  [CPUFREQ] Clean up longhaul's speed pretty-printer
  [CPUFREQ] Disambiguate loop indexes in powernow-k7
  [CPUFREQ] Typo in powernow-k8

13 years agoMerge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik...
Linus Torvalds [Tue, 20 Jun 2006 01:50:43 +0000]
Merge branch 'upstream-linus' of /linux/kernel/git/jgarzik/netdev-2.6

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (166 commits)
  [PATCH] net: au1000_eth: PHY framework conversion
  [PATCH] 3c5zz ethernet: fix section warnings
  [PATCH] smc ethernet: fix section mismatch warnings
  [PATCH] hp ethernet: fix section mismatches
  [PATCH] Section mismatch in drivers/net/ne.o during modpost
  [PATCH] e1000: prevent statistics from getting garbled during reset
  [PATCH] smc911x Kconfig fix
  [PATCH] forcedeth: new device ids
  [PATCH] forcedeth config: version
  [PATCH] forcedeth config: module parameters
  [PATCH] forcedeth config: diagnostics
  [PATCH] forcedeth config: move functions
  [PATCH] forcedeth config: statistics
  [PATCH] forcedeth config: csum
  [PATCH] forcedeth config: wol
  [PATCH] forcedeth config: phy
  [PATCH] forcedeth config: flow control
  [PATCH] forcedeth config: ring sizes
  [PATCH] forcedeth config: tso cleanup
  [DOC] Update bonding documentation with sysfs info
  ...

13 years agoAdd support for suspending and resuming the whole console subsystem
Linus Torvalds [Tue, 20 Jun 2006 01:16:01 +0000]
Add support for suspending and resuming the whole console subsystem

Trying to suspend/resume with console messages flying all around is
doomed to failure, when the devices that the messages are trying to
go to are being shut down.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>

13 years agoMake sure to re-enable SCI after an ACPI suspend
Linus Torvalds [Tue, 20 Jun 2006 01:05:09 +0000]
Make sure to re-enable SCI after an ACPI suspend

According to the ACPI spec, it should be enabled on return from suspend,
but bugs happen.  Apparently especially on the Apple Intel Macs.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>

13 years agoImprove SATA core suspend/resume
Linus Torvalds [Tue, 20 Jun 2006 01:01:27 +0000]
Improve SATA core suspend/resume

Doing a full ata_busy_sleep() seems to get suspend and resume working
fine on the Apple Mac Mini, at least.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>

13 years ago[SCSI] 53c700: remove reliance on deprecated cmnd fields
James Bottomley [Wed, 14 Jun 2006 02:31:19 +0000]
[SCSI] 53c700: remove reliance on deprecated cmnd fields

This one's quite tricky.  The 53c700 uses the now deprecated fields of
the command structure for saving the prior command when it does
autosense.  To fix this, we have to add extra fields to the LUN to
accommodate a copy of the real command.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>