8 years agoblk-cgroup: Add unaccounted time to timeslice_used.
Justin TerAvest [Sat, 12 Mar 2011 15:54:00 +0000]
blk-cgroup: Add unaccounted time to timeslice_used.

There are two kind of times that tasks are not charged for: the first
seek and the extra time slice used over the allocated timeslice. Both
of these exported as a new unaccounted_time stat.

I think it would be good to have this reported in 'time' as well, but
that is probably a separate discussion.

Signed-off-by: Justin TerAvest <teravest@google.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

8 years agoblock: fixup plugging stubs for !CONFIG_BLOCK
Jens Axboe [Fri, 11 Mar 2011 19:17:08 +0000]
block: fixup plugging stubs for !CONFIG_BLOCK

They used an older prototype, fix it up.

Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

8 years agoblock: remove obsolete comments for blkdev_issue_zeroout.
Tao Ma [Fri, 11 Mar 2011 19:13:54 +0000]
block: remove obsolete comments for blkdev_issue_zeroout.

barrier is already removed, so remove the obsolete comments
in blkdev_issue_zeroout.

Cc: Jens Axboe <jaxboe@fusionio.com>
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

8 years agoblktrace: Use rq->cmd_flags directly in blk_add_trace_rq.
Tao Ma [Fri, 11 Mar 2011 19:11:59 +0000]
blktrace: Use rq->cmd_flags directly in blk_add_trace_rq.

In blk_add_trace_rq, we only chose the minor 2 bits from
request's cmd_flags and did some check for discard.
so most of other flags(e.g, REQ_SYNC) are missing.

For example, with a sync write after blkparse we get:
  8,16   1        1     0.001776503  7509  A  WS 1349632 + 1024 <- (8,17) 1347584
  8,16   1        2     0.001776813  7509  Q  WS 1349632 + 1024 [dd]
  8,16   1        3     0.001780395  7509  G  WS 1349632 + 1024 [dd]
  8,16   1        5     0.001783186  7509  I   W 1349632 + 1024 [dd]
  8,16   1       11     0.001816987  7509  D   W 1349632 + 1024 [dd]
  8,16   0        2     0.006218192     0  C   W 1349632 + 1024 [0]

Since now we have integrated the flags of both bio and request,
it is safe to pass rq->cmd_flags directly to __blk_add_trace.

With this patch, after a sync write we get:
  8,16   1        1     0.001776900  5425  A  WS 1189888 + 1024 <- (8,17) 1187840
  8,16   1        2     0.001777179  5425  Q  WS 1189888 + 1024 [dd]
  8,16   1        3     0.001780797  5425  G  WS 1189888 + 1024 [dd]
  8,16   1        5     0.001783402  5425  I  WS 1189888 + 1024 [dd]
  8,16   1       11     0.001817468  5425  D  WS 1189888 + 1024 [dd]
  8,16   0        2     0.005640709     0  C  WS 1189888 + 1024 [0]

Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

8 years agoMerge branch 'for-2.6.39/stack-plug' into for-2.6.39/core
Jens Axboe [Thu, 10 Mar 2011 07:58:35 +0000]
Merge branch 'for-2.6.39/stack-plug' into for-2.6.39/core

Conflicts:
block/blk-core.c
block/blk-flush.c
drivers/md/raid1.c
drivers/md/raid10.c
drivers/md/raid5.c
fs/nilfs2/btnode.c
fs/nilfs2/mdt.c

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

8 years agoblk-throttle: Use blk_plug in throttle dispatch
Vivek Goyal [Wed, 9 Mar 2011 07:27:37 +0000]
blk-throttle: Use blk_plug in throttle dispatch

Use plug in throttle dispatch also as we are dispatching a bunch of
bios in throttle context and some of them might merge.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

8 years agoblock: kill off REQ_UNPLUG
Jens Axboe [Wed, 9 Mar 2011 10:56:30 +0000]
block: kill off REQ_UNPLUG

With the plugging now being explicitly controlled by the
submitter, callers need not pass down unplugging hints
to the block layer. If they want to unplug, it's because they
manually plugged on their own - in which case, they should just
unplug at will.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

8 years agoaio: remove request submission batching
Jens Axboe [Thu, 3 Mar 2011 01:12:18 +0000]
aio: remove request submission batching

This should be useless now that we have on-stack plugging. So lets just
kill it.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

8 years agofs: make aio plug
Shaohua Li [Thu, 1 Jul 2010 05:55:01 +0000]
fs: make aio plug

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

8 years agofs: make mpage read/write_pages() plug
Jens Axboe [Tue, 22 Jun 2010 10:52:14 +0000]
fs: make mpage read/write_pages() plug

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

8 years agoread-ahead: use plugging
Jens Axboe [Mon, 19 Apr 2010 08:04:38 +0000]
read-ahead: use plugging

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

8 years agofs: make generic file read/write functions plug
Jens Axboe [Thu, 24 Jun 2010 13:05:37 +0000]
fs: make generic file read/write functions plug

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

8 years agoblock: remove per-queue plugging
Jens Axboe [Thu, 10 Mar 2011 07:52:07 +0000]
block: remove per-queue plugging

Code has been converted over to the new explicit on-stack plugging,
and delay users have been converted to use the new API for that.
So lets kill off the old plugging along with aops->sync_page().

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

8 years agoblock: initial patch for on-stack per-task plugging
Jens Axboe [Tue, 8 Mar 2011 12:19:51 +0000]
block: initial patch for on-stack per-task plugging

This patch adds support for creating a queuing context outside
of the queue itself. This enables us to batch up pieces of IO
before grabbing the block device queue lock and submitting them to
the IO scheduler.

The context is created on the stack of the process and assigned in
the task structure, so that we can auto-unplug it if we hit a schedule
event.

The current queue plugging happens implicitly if IO is submitted to
an empty device, yet callers have to remember to unplug that IO when
they are going to wait for it. This is an ugly API and has caused bugs
in the past. Additionally, it requires hacks in the vm (->sync_page()
callback) to handle that logic. By switching to an explicit plugging
scheme we make the API a lot nicer and can get rid of the ->sync_page()
hack in the vm.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

8 years agoscsi: convert to blk_delay_queue()
Jens Axboe [Fri, 16 Apr 2010 19:13:15 +0000]
scsi: convert to blk_delay_queue()

It was always abuse to reuse the plugging infrastructure for this,
convert it to the (new) real API for delaying queueing a bit. A
default delay of 3 msec is defined, to match the previous
behaviour.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

8 years agoide-cd: convert to blk_delay_queue() for a short pause
Jens Axboe [Fri, 16 Apr 2010 19:11:21 +0000]
ide-cd: convert to blk_delay_queue() for a short pause

It was always abuse to reuse the plugging infrastructure for this,
convert it to the (new) real API for delaying queueing a bit.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Acked-by: David S. Miller <davem@davemloft.net>

8 years agoblock: add API for delaying work/request_fn a little bit
Jens Axboe [Wed, 2 Mar 2011 16:08:00 +0000]
block: add API for delaying work/request_fn a little bit

Currently we use plugging for that, but as plugging is going away,
we need an alternative mechanism.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

8 years agostaging: Convert to bdops->check_events()
Tejun Heo [Wed, 9 Mar 2011 18:54:29 +0000]
staging: Convert to bdops->check_events()

Convert two staging drivers - blkvsc_drv and cyasblkdev_block - from
->media_changed() to ->check_events().  The former always indicated
media changed while the latter always indicated media not changed.
Not sure what the drivers are trying to achieve but keep the original
behavior.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kay Sievers <kay.sievers@vrfy.org>

8 years agopktcdvd: Convert to bdops->check_events()
Tejun Heo [Wed, 9 Mar 2011 18:54:28 +0000]
pktcdvd: Convert to bdops->check_events()

Convert from ->media_changed() to ->check_events().

pktcdvd needs to forward all event related operations to the
underlying device.  Forward ->check_events() instead of
->media_changed() and inherit disk->[async_]events.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Peter Osterlund <petero2@telia.com>

8 years agoumem: Drop dummy ->media_changed()
Tejun Heo [Wed, 9 Mar 2011 18:54:28 +0000]
umem: Drop dummy ->media_changed()

umem doesn't implement media changed detection and there's no need to
implement dummy callback anymore.  Remove it.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kay Sievers <kay.sievers@vrfy.org>

8 years agos390/tape_block: Convert to bdops->check_events()
Tejun Heo [Wed, 9 Mar 2011 18:54:28 +0000]
s390/tape_block: Convert to bdops->check_events()

Convert from ->media_changed() to ->check_events().

s390/tape_block buffers media changed state and clears it on
revalidation.  It will behave correctly with kernel event polling.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>

8 years agoi2o_block: Convert to bdops->check_events()
Tejun Heo [Wed, 9 Mar 2011 18:54:28 +0000]
i2o_block: Convert to bdops->check_events()

Convert from ->media_changed() to ->check_events().

i2o_block buffers media changed state and clears it after reporting.
It will behave correctly with kernel event polling.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Markus Lidel <Markus.Lidel@shadowconnect.com>

8 years agoxsysace: Convert to bdops->check_events()
Tejun Heo [Wed, 9 Mar 2011 18:54:28 +0000]
xsysace: Convert to bdops->check_events()

Convert from ->media_changed() to ->check_events().

xsysace buffers media changed state and clears it on revalidation.  It
will behave correctly with kernel event polling.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kay Sievers <kay.sievers@vrfy.org>

8 years agoub: Convert to bdops->check_events()
Tejun Heo [Wed, 9 Mar 2011 18:54:28 +0000]
ub: Convert to bdops->check_events()

Convert from ->media_changed() to ->check_events().

ub buffers media changed state and clears it on revalidation.  It will
behave correctly with kernel event polling.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Pete Zaitcev <zaitcev@redhat.com>

8 years agoswim[3]: Convert to bdops->check_events()
Tejun Heo [Wed, 9 Mar 2011 18:54:28 +0000]
swim[3]: Convert to bdops->check_events()

Convert from ->media_changed() to ->check_events().

Both swim and swim3 buffer media changed state and clear it on
revalidation.  They will behave correctly with kernel event polling.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Laurent Vivier <laurent@lvivier.info>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>

8 years agodac960: Convert to bdops->check_events()
Tejun Heo [Wed, 9 Mar 2011 18:54:28 +0000]
dac960: Convert to bdops->check_events()

Convert from ->media_changed() to ->check_events().

DAC960 media change notification seems to be one way (once set, never
cleared) and will generate spurious events when polled once the
condition triggers.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kay Sievers <kay.sievers@vrfy.org>

8 years agoparide: Convert to bdops->check_events()
Tejun Heo [Wed, 9 Mar 2011 18:54:28 +0000]
paride: Convert to bdops->check_events()

Convert paride drivers from ->media_changed() to ->check_events().

pcd and pd buffer and clear events after reporting; however, pf
unconditionally reports MEDIA_CHANGE and will generate spurious events
when polled.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Tim Waugh <tim@cyberelk.net>

8 years agogdrom,viocd: Convert to bdops->check_events()
Tejun Heo [Wed, 9 Mar 2011 18:54:28 +0000]
gdrom,viocd: Convert to bdops->check_events()

Convert gdrom and viocd from ->media_changed() to ->check_events().

It's unclear how the conditions are cleared and it's possible that it
may generate spurious events when polled.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kay Sievers <kay.sievers@vrfy.org>

8 years agofloppy,{ami|ata}flop: Convert to bdops->check_events()
Tejun Heo [Wed, 9 Mar 2011 18:54:27 +0000]
floppy,{ami|ata}flop: Convert to bdops->check_events()

Convert the floppy drivers from ->media_changed() to ->check_events().
Both floppy and ataflop buffer media changed state bit and clear them
on revalidation and will behave correctly with kernel event polling.

I can't tell how amiflop clears its event and it's possible that it
may generate spurious events when polled.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kay Sievers <kay.sievers@vrfy.org>

8 years agoide: Convert to bdops->check_events()
Tejun Heo [Wed, 9 Mar 2011 18:54:27 +0000]
ide: Convert to bdops->check_events()

Convert ->media_changed() to the new ->check_events() method.  The
conversion is mostly mechanical.  The only notable change is that
cdrom now doesn't generate any event if @slot_nr isn't CDSL_CURRENT.
It used to return -EINVAL which would be treated as media changed.  As
media changer isn't supported anyway, this doesn't make any
difference.

This makes ide emit the standard disk events and allows kernel event
polling.  Currently, only MEDIA_CHANGE event is implemented.  Adding
support for EJECT_REQUEST shouldn't be difficult; however, given that
ide driver is already deprecated, it probably is best to leave it
alone.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Jens Axboe <axboe@kernel.dk>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-ide@vger.kernel.org

8 years agoblock: Don't check events while open is in progress
Tejun Heo [Wed, 9 Mar 2011 18:54:27 +0000]
block: Don't check events while open is in progress

Not all block drivers clear events immediately after reporting.  Some
do so in ->revalidate_disk() or other steps during ->open().  There is
a slim chance event poll may happen between the clearing event check
from check_disk_change() and the actual clearing of the events which
would result in spurious events.

Block event checks while block device open is in progress.  There is
no need to kick explicit event check afterwards as events are always
checked during open.

-v2: The original patch could have called disk_unblock_events() with
     an already released or %NULL @disk causing oops.  Fixed by making
     sure references are put after disk_unblock_events() is called.
     It also makes the error path of __blkdev_get() a bit simpler.
     This problem was reported by Jens.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kay Sievers <kay.sievers@vrfy.org>

8 years agoblock: Don't check events on close unless it was blocked
Tejun Heo [Wed, 9 Mar 2011 18:54:27 +0000]
block: Don't check events on close unless it was blocked

The block event mechanism currently always checks events when the
device is being closed regardless of the open mode.  The intention was
to allow detection of EJECT_REQUEST when a device is closed whether
disk event polling is enabled or not.

This is unnecessary as, for devices of interest, events are checked
from either userland or kernel and in the former case ->check_events()
is performed on open of each poll attempt anyway.  Furthermore, this
unconditional event check on close makes the code susceptible to event
loop if the block driver doesn't clear reported events correctly - an
event triggers userland to open and close the device which in turn
causes another event, rinse and repeat.

Check events on close only if it was blocked by excl write open.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kay Sievers <kay.sievers@vrfy.org>

8 years agoblock: Don't implicitly trigger event check on disk_unblock_events()
Tejun Heo [Wed, 9 Mar 2011 18:54:27 +0000]
block: Don't implicitly trigger event check on disk_unblock_events()

Currently, disk_unblock_events() implicitly kick event check if the
block count reaches zero.  This behavior is not described in the
comment and hinders with future changes.  Make the unblocker
explicitly check events by calling disk_check_events() as necessary.

This patch doesn't cause any behavior difference.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kay Sievers <kay.sievers@vrfy.org>

8 years agoblk-cgroup: Lower minimum weight from 100 to 10.
Justin TerAvest [Tue, 8 Mar 2011 18:45:00 +0000]
blk-cgroup: Lower minimum weight from 100 to 10.

We've found that we still get good, useful isolation at weights this
low. I'd like to adjust the minimum so that any other changes can take
these values into account.

Signed-off-by: Justin TerAvest <teravest@google.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

8 years agoblock: biovec_slab vs. CONFIG_BLK_DEV_INTEGRITY
Martin K. Petersen [Tue, 8 Mar 2011 07:28:01 +0000]
block: biovec_slab vs. CONFIG_BLK_DEV_INTEGRITY

The block integrity subsystem no longer uses the bio_vec slabs so this
code can safely be compiled in.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

8 years agoblk-throttle: Some cleanups and race fixes in limit update code
Vivek Goyal [Mon, 7 Mar 2011 20:09:32 +0000]
blk-throttle: Some cleanups and race fixes in limit  update code

When throttle group limits are updated through cgroups, a thread is
woken up to process these updates. While reviewing that code, oleg noted
couple of race conditions existed in the code and he also suggested that
code can be simplified.

This patch fixes the races simplifies the code based on Oleg's suggestions:

- Use xchg().
- Introduced a common function throtl_update_blkio_group_common()
          which is shared now by all iops/bps update functions.

Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>

Fixed a merge issue, throtl_schedule_delayed_work() takes throtl_data
as the argument now, not the queue.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

8 years agoblk-throttle: process limit change only through one function
Vivek Goyal [Mon, 7 Mar 2011 20:05:14 +0000]
blk-throttle: process limit change only through one function

With the help of cgroup interface one can go and upate the bps/iops
limits of existing group. Once the limits are udpated, a thread is
woken up to see if some blocked group needs recalculation based on new
limits and needs to be requeued.

There was also a piece of code where I was checking for group limit
update when a fresh bio comes in. This patch gets rid of that piece of
code and keeps processing the limit change at one place
throtl_process_limit_change().  It just keeps the code simple and easy
to understand.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

8 years agoMerge branch 'block-for-2.6.39-core' of ssh://master.kernel.org/pub/scm/linux/kernel...
Jens Axboe [Mon, 7 Mar 2011 08:40:21 +0000]
Merge branch 'block-for-2.6.39-core' of ssh:///linux/kernel/git/tj/misc into for-2.6.39/core

8 years agocfq-iosched: Fix update_vdisktime logic
Gui Jianfeng [Mon, 7 Mar 2011 08:28:09 +0000]
cfq-iosched: Fix update_vdisktime logic

The update_vdisktime logic is broken since commit
b54ce60eb7f61f8e314b8b241b0469eda3bb1d42, st->min_vdisktime never makes
a progress. Fix it.

Thanks Vivek for pointing it out.

Signed-off-by: Gui Jianfeng <guijianfen@cn.fujitsu.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

8 years agocfq-iosched: give busy sync queue no dispatch limit
Shaohua Li [Mon, 7 Mar 2011 08:26:29 +0000]
cfq-iosched: give busy sync queue no dispatch limit

If there are a sync and an async queue and the sync queue's think time
is small, we can ignore the sync queue's dispatch quantum. Because the
sync queue will always preempt the async queue, we don't need to care
about async's latency.  This can fix a performance regression of
aiostress test, which is introduced by commit f8ae6e3eb825. The issue
should exist even without the commit, but the commit amplifies the
impact.

The initial post does the same optimization for RT queue too, but since
I have no real workload for it, Vivek suggests to drop it.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Reviewed-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

8 years agocfq-iosched: fix race in cfq_set_request()
Jens Axboe [Mon, 7 Mar 2011 07:59:06 +0000]
cfq-iosched: fix race in cfq_set_request()

We need to hold the queue lock over the reference increment,
it's not atomic anymore.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

8 years agoMerge branch 'for-linus' of ../linux-2.6-block into block-for-2.6.39/core
Tejun Heo [Fri, 4 Mar 2011 18:09:02 +0000]
Merge branch 'for-linus' of ../linux-2.6-block into block-for-2.6.39/core

This merge creates two set of conflicts.  One is simple context
conflicts caused by removal of throtl_scheduled_delayed_work() in
for-linus and removal of throtl_shutdown_timer_wq() in
for-2.6.39/core.

The other is caused by commit 255bb490c8 (block: blk-flush shouldn't
call directly into q->request_fn() __blk_run_queue()) in for-linus
crashing with FLUSH reimplementation in for-2.6.39/core.  The conflict
isn't trivial but the resolution is straight-forward.

* __blk_run_queue() calls in flush_end_io() and flush_data_end_io()
  should be called with @force_kblockd set to %true.

* elv_insert() in blk_kick_flush() should use
  %ELEVATOR_INSERT_REQUEUE.

Both changes are to avoid invoking ->request_fn() directly from
request completion path and closely match the changes in the commit
255bb490c8.

Signed-off-by: Tejun Heo <tj@kernel.org>

8 years agoblock: kill loop_mutex
Petr Uzel [Thu, 3 Mar 2011 16:48:50 +0000]
block: kill loop_mutex

Following steps lead to deadlock in kernel:

dd if=/dev/zero of=img bs=512 count=1000
losetup -f img
mkfs.ext2 /dev/loop0
mount -t ext2 -o loop /dev/loop0 mnt
umount mnt/

Stacktrace:
[<c102ec04>] irq_exit+0x36/0x59
[<c101502c>] smp_apic_timer_interrupt+0x6b/0x75
[<c127f639>] apic_timer_interrupt+0x31/0x38
[<c101df88>] mutex_spin_on_owner+0x54/0x5b
[<fe2250e9>] lo_release+0x12/0x67 [loop]
[<c10c4eae>] __blkdev_put+0x7c/0x10c
[<c10a4da5>] fput+0xd5/0x1aa
[<fe2250cf>] loop_clr_fd+0x1a9/0x1b1 [loop]
[<fe225110>] lo_release+0x39/0x67 [loop]
[<c10c4eae>] __blkdev_put+0x7c/0x10c
[<c10a59d9>] deactivate_locked_super+0x17/0x36
[<c10b6f37>] sys_umount+0x27e/0x2a5
[<c10b6f69>] sys_oldumount+0xb/0xe
[<c1002897>] sysenter_do_call+0x12/0x26
[<ffffffff>] 0xffffffff

Regression since 2a48fc0ab24241755dc9, which introduced the private
loop_mutex as part of the BKL removal process.

As per [1], the mutex can be safely removed.

[1] http://www.gossamer-threads.com/lists/linux/kernel/1341930

Addresses: https://bugzilla.novell.com/show_bug.cgi?id=669394
Addresses: https://bugzilla.kernel.org/show_bug.cgi?id=29172

Signed-off-by: Petr Uzel <petr.uzel@suse.cz>
Cc: stable@kernel.org
Reviewed-by: Nikanth Karthikesan <knikanth@suse.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

8 years agoblktrace: Remove blk_fill_rwbs_rq.
Tao Ma [Thu, 3 Mar 2011 15:53:20 +0000]
blktrace: Remove blk_fill_rwbs_rq.

If we enable trace events to trace block actions, We use
blk_fill_rwbs_rq to analyze the corresponding actions
in request's cmd_flags, but we only choose the minor 2 bits
from it, so most of other flags(e.g, REQ_SYNC) are missing.
For example, with a sync write we get:
write_test-2409  [001]   160.013869: block_rq_insert: 3,64 W 0 () 258135 + =
8 [write_test]

Since now we have integrated the flags of both bio and request,
it is safe to pass rq->cmd_flags directly to blk_fill_rwbs and
blk_fill_rwbs_rq isn't needed any more.

With this patch, after a sync write we get:
write_test-2417  [000]   226.603878: block_rq_insert: 3,64 WS 0 () 258135 +=
 8 [write_test]

Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

8 years agoblock: Move blk_throtl_exit() call to blk_cleanup_queue()
Vivek Goyal [Thu, 3 Mar 2011 00:05:33 +0000]
block: Move blk_throtl_exit() call to blk_cleanup_queue()

Move blk_throtl_exit() in blk_cleanup_queue() as blk_throtl_exit() is
written in such a way that it needs queue lock. In blk_release_queue()
there is no gurantee that ->queue_lock is still around.

Initially blk_throtl_exit() was in blk_cleanup_queue() but Ingo reported
one problem.

  https://lkml.org/lkml/2010/10/23/86

  And a quick fix moved blk_throtl_exit() to blk_release_queue().

        commit 7ad58c028652753814054f4e3ac58f925e7343f4
        Author: Jens Axboe <jaxboe@fusionio.com>
        Date:   Sat Oct 23 20:40:26 2010 +0200

        block: fix use-after-free bug in blk throttle code

This patch reverts above change and does not try to shutdown the
throtl work in blk_sync_queue(). By avoiding call to
throtl_shutdown_timer_wq() from blk_sync_queue(), we should also avoid
the problem reported by Ingo.

blk_sync_queue() seems to be used only by md driver and it seems to be
using it to make sure q->unplug_fn is not called as md registers its
own unplug functions and it is about to free up the data structures
used by unplug_fn(). Block throttle does not call back into unplug_fn()
or into md. So there is no need to cancel blk throttle work.

In fact I think cancelling block throttle work is bad because it might
happen that some bios are throttled and scheduled to be dispatched later
with the help of pending work and if work is cancelled, these bios might
never be dispatched.

Block layer also uses blk_sync_queue() during blk_cleanup_queue() and
blk_release_queue() time. That should be safe as we are also calling
blk_throtl_exit() which should make sure all the throttling related
data structures are cleaned up.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

8 years agoloop: No need to initialize ->queue_lock explicitly before calling blk_cleanup_queue()
Vivek Goyal [Thu, 3 Mar 2011 00:04:50 +0000]
loop: No need to initialize ->queue_lock explicitly before calling blk_cleanup_queue()

Now we initialize ->queue_lock at queue allocation time so driver does
not have to worry about initializing it before calling
blk_cleanup_queue().

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

8 years agoblock: Initialize ->queue_lock to internal lock at queue allocation time
Vivek Goyal [Thu, 3 Mar 2011 00:04:42 +0000]
block: Initialize ->queue_lock to internal lock at queue allocation time

There does not seem to be a clear convention whether q->queue_lock is
initialized or not when blk_cleanup_queue() is called. In the past it
was not necessary but now blk_throtl_exit() takes up queue lock by
default and needs queue lock to be available.

In fact elevator_exit() code also has similar requirement just that it
is less stringent in the sense that elevator_exit() is called only if
elevator is initialized.

Two problems have been noticed because of ambiguity about spin lock
status.

      - If a driver calls blk_alloc_queue() and then soon calls
        blk_cleanup_queue() almost immediately, (because some other
driver structure allocation failed or some other error happened)
then blk_throtl_exit() will run into issues as queue lock is not
initialized. Loop driver ran into this issue recently and I
noticed error paths in md driver too. Similar error paths should
exist in other drivers too.

      - If some driver provided external spin lock and zapped the lock
        before blk_cleanup_queue(), then it can lead to issues.

So this patch initializes the default queue lock at queue allocation time.

block throttling code is one of the users of queue lock and it is
initialized at the queue allocation time, so it makes sense to
initialize ->queue_lock also to internal lock. A driver can overide that
lock later. This will take care of the issue where a driver does not have
to worry about initializing the queue lock to default before calling
blk_cleanup_queue()

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

8 years agoblock/genhd: Change some numerals into macros
Liu Yuan [Wed, 2 Mar 2011 16:00:15 +0000]
block/genhd: Change some numerals into macros

Rename the numerals in the diskstats_show() into the macros.

Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Liu Yuan <tailai.ly@taobao.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

8 years agoblock: blk-flush shouldn't call directly into q->request_fn() __blk_run_queue()
Tejun Heo [Wed, 2 Mar 2011 13:48:06 +0000]
block: blk-flush shouldn't call directly into q->request_fn() __blk_run_queue()

blk-flush decomposes a flush into sequence of multiple requests.  On
completion of a request, the next one is queued; however, block layer
must not implicitly call into q->request_fn() directly from completion
path.  This makes the queue behave unexpectedly when seen from the
drivers and violates the assumption that q->request_fn() is called
with process context + queue_lock.

This patch makes blk-flush the following two changes to make sure
q->request_fn() is not called directly from request completion path.

- blk_flush_complete_seq_end_io() now asks __blk_run_queue() to always
  use kblockd instead of calling directly into q->request_fn().

- queue_next_fseq() uses ELEVATOR_INSERT_REQUEUE instead of
  ELEVATOR_INSERT_FRONT so that elv_insert() doesn't try to unplug the
  request queue directly.

Reported by Jan in the following threads.

 http://thread.gmane.org/gmane.linux.ide/48778
 http://thread.gmane.org/gmane.linux.ide/48786

stable: applicable to v2.6.37.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Jan Beulich <JBeulich@novell.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

8 years agoblock: add @force_kblockd to __blk_run_queue()
Tejun Heo [Wed, 2 Mar 2011 13:48:05 +0000]
block: add @force_kblockd to __blk_run_queue()

__blk_run_queue() automatically either calls q->request_fn() directly
or schedules kblockd depending on whether the function is recursed.
blk-flush implementation needs to be able to explicitly choose
kblockd.  Add @force_kblockd.

All the current users are converted to specify %false for the
parameter and this patch doesn't introduce any behavior change.

stable: This is prerequisite for fixing ide oops caused by the new
        blk-flush implementation.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jan Beulich <JBeulich@novell.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

8 years agocfq-iosched: Always provide group isolation.
Justin TerAvest [Tue, 1 Mar 2011 20:05:08 +0000]
cfq-iosched: Always provide group isolation.

Effectively, make group_isolation=1 the default and remove the tunable.
The setting group_isolation=0 was because by default we idle on
sync-noidle tree and on fast devices, this can be very harmful for
throughput.

However, this problem can also be addressed by tuning slice_idle and
possibly group_idle on faster storage devices.

This change simplifies the CFQ code by removing the feature entirely.

Signed-off-by: Justin TerAvest <teravest@google.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

8 years agoMerge commit 'v2.6.38-rc6' into for-2.6.39/core
Jens Axboe [Tue, 1 Mar 2011 20:04:39 +0000]
Merge commit 'v2.6.38-rc6' into for-2.6.39/core

Conflicts:
block/cfq-iosched.c

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

8 years agoblock: fix kernel-doc format for blkdev_issue_zeroout
Ben Hutchings [Tue, 1 Mar 2011 18:45:24 +0000]
block: fix kernel-doc format for blkdev_issue_zeroout

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

8 years agoblk-throttle: Do not use kblockd workqueue for throtl work
Vivek Goyal [Tue, 1 Mar 2011 18:40:54 +0000]
blk-throttle: Do not use kblockd workqueue for throtl work

o Dominik Klein reported a system hang issue while doing some blkio
  throttling testing.

  https://lkml.org/lkml/2011/2/24/173

o Some tracing revealed that CFQ was not dispatching any more jobs as
  queue unplug was not happening. And queue unplug was not happening
  because unplug work was not being called as there was one throttling
  work on same cpu which as not finished yet. And throttling work had not
  finished as it was tyring to dispatch a bio to CFQ but all the request
  descriptors were consume to it was put to sleep.

o So basically it is a cyclic dependecny between CFQ unplug work and
  throtl dispatch work. Tejun suggested that use separate workqueue for
  such cases.

o This patch uses a separate workqueue for throttle related work and
  does not rely on kblockd workqueue anymore.

Cc: stable@kernel.org
Reported-by: Dominik Klein <dk@in-telegence.net>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

8 years agoMerge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groec...
Linus Torvalds [Tue, 1 Mar 2011 02:09:02 +0000]
Merge branch 'hwmon-for-linus' of git://git./linux/kernel/git/groeck/staging

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging:
  hwmon: (adt7411) add MODULE_DEVICE_TABLE
  hwmon: (ad7414) add MODULE_DEVICE_TABLE

8 years agofs/block_dev.c: fix new kernel-doc warning
Randy Dunlap [Sat, 26 Feb 2011 18:54:00 +0000]
fs/block_dev.c: fix new kernel-doc warning

Fix new kernel-doc warning in fs/block_dev.c:

Warning(fs/block_dev.c:937): No description found for parameter 'kill_dirty'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoACPI: Fix build for CONFIG_NET unset
Rafael J. Wysocki [Tue, 1 Mar 2011 00:12:19 +0000]
ACPI: Fix build for CONFIG_NET unset

Several ACPI drivers fail to build if CONFIG_NET is unset, because
they refer to things depending on CONFIG_THERMAL that in turn depends
on CONFIG_NET.  However, CONFIG_THERMAL doesn't really need to depend
on CONFIG_NET, because the only part of it requiring CONFIG_NET is
the netlink interface in thermal_sys.c.

Put the netlink interface in thermal_sys.c under #ifdef CONFIG_NET
and remove the dependency of CONFIG_THERMAL on CONFIG_NET from
drivers/thermal/Kconfig.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Len Brown <lenb@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Luming Yu <luming.yu@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoMerge branch 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied...
Linus Torvalds [Tue, 1 Mar 2011 01:58:09 +0000]
Merge branch 'drm-fixes' of git://git./linux/kernel/git/airlied/drm-2.6

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm: fix unsigned vs signed comparison issue in modeset ctl ioctl.
  drm/nv50-nvc0: make sure vma is definitely unmapped when destroying bo

8 years agoMerge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Tue, 1 Mar 2011 01:57:30 +0000]
Merge branch 'omap-fixes-for-linus' of git://git./linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6:
  omap4: prcm: Fix the CPUx clockdomain offsets
  OMAP2+: clocksource: fix crash on boot when !CONFIG_OMAP_32K_TIMER
  OMAP2/3: clock: fix fint calculation for DPLL_FREQSEL
  OMAP2+: mailbox: fix lookups for multiple mailboxes
  OMAP2420: mailbox: fix IVA vs DSP IRQ numbering
  mach-omap2: smartreflex: world-writable debugfs voltage files
  mach-omap2: pm: world-writable debugfs timer files
  mach-omap2: mux: world-writable debugfs files

8 years agoMerge branches 'perf-fixes-for-linus', 'x86-fixes-for-linus' and 'timers-fixes-for...
Linus Torvalds [Tue, 1 Mar 2011 01:55:08 +0000]
Merge branches 'perf-fixes-for-linus', 'x86-fixes-for-linus' and 'timers-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf timechart: Fix max number of cpus
  perf timechart: Fix black idle boxes in the title
  perf hists: Print number of samples, not the period sum

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Use u32 instead of long to set reset vector back to 0

* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  clockevents: Prevent oneshot mode when broadcast device is periodic

8 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi...
Linus Torvalds [Tue, 1 Mar 2011 01:53:04 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/mszeredi/fuse

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: fix truncate after open
  fuse: fix hang of single threaded fuseblk filesystem

8 years agoMerge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec...
Linus Torvalds [Tue, 1 Mar 2011 01:52:47 +0000]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/jlbec/ocfs2

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2:
  ocfs2: Check heartbeat mode for kernel stacks only
  Ocfs2/refcounttree: Fix a bug for refcounttree to writeback clusters in a right number.
  ocfs2: Fix estimate of necessary credits for mkdir

8 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
Linus Torvalds [Tue, 1 Mar 2011 01:47:09 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  eukrea-tlv320: fix platform_name
  ASoC: correct pxa AC97 DAI names
  ALSA: hda - Add support for new IDT 92HD98 and 92HD99 codecs
  ALSA: HDA: Add ideapad quirk for two Dell machines
  ALSA: HDA: Add a new Conexant codec 506e (20590)
  ALSA: usb-audio: fix oops due to cleanup race when disconnecting
  ASoC: Hook wm_hubs micbiases up to CLK_SYS
  ASoC: Correct definition of WM8903_VMID_RES_5K
  ASoC: Fix WM8958 default microphone detection argument ordering
  ALSA: HDA: Fix mic initialization in VIA auto parser
  ALSA: fix one memory leak in sound jack

8 years agomm: <asm-generic/pgtable.h> must include <linux/mm_types.h>
Ben Hutchings [Sun, 27 Feb 2011 05:41:35 +0000]
mm: <asm-generic/pgtable.h> must include <linux/mm_types.h>

Commit e2cda3226481 ("thp: add pmd mangling generic functions") replaced
some macros in <asm-generic/pgtable.h> with inline functions.

If the functions are to be defined (not all architectures need them)
then struct vm_area_struct must be defined first.  So include
<linux/mm_types.h>.

Fixes a build failure seen in Debian:

CC [M] drivers/media/dvb/mantis/mantis_pci.o
  In file included from arch/arm/include/asm/pgtable.h:460,
                   from drivers/media/dvb/mantis/mantis_pci.c:25:
  include/asm-generic/pgtable.h: In function 'ptep_test_and_clear_young':
  include/asm-generic/pgtable.h:29: error: dereferencing pointer to incomplete type

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agox86: Use u32 instead of long to set reset vector back to 0
Don Zickus [Tue, 8 Feb 2011 04:25:00 +0000]
x86: Use u32 instead of long to set reset vector back to 0

A customer of ours, complained that when setting the reset
vector back to 0, it trashed other data and hung their box.
They noticed when only 4 bytes were set to 0 instead of 8,
everything worked correctly.

Mathew pointed out:

 |
 | We're supposed to be resetting trampoline_phys_low and
 | trampoline_phys_high here, which are two 16-bit values.
 | Writing 64 bits is definitely going to overwrite space
 | that we're not supposed to be touching.
 |

So limit the area modified to u32.

Signed-off-by: Don Zickus <dzickus@redhat.com>
Acked-by: Matthew Garrett <mjg@redhat.com>
Cc: <stable@kernel.org>
LKML-Reference: <1297139100-424-1-git-send-email-dzickus@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

8 years agoperf timechart: Fix max number of cpus
Thomas Renninger [Sun, 27 Feb 2011 21:36:46 +0000]
perf timechart: Fix max number of cpus

Currently numcpus is determined in pid_put_sample which is only
called on sched_switch/sched_wakeup sample processing.

On a machine with a lot cpus I often saw the last cpu missing.

Check for (max) numcpus on every event happening and in the
beginning. -> fixes the issue for me.

Signed-off-by: Thomas Renninger <trenn@suse.de>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: lenb@kernel.org
LKML-Reference: <1298842606-55712-6-git-send-email-trenn@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

8 years agoperf timechart: Fix black idle boxes in the title
Thomas Renninger [Sun, 27 Feb 2011 21:36:45 +0000]
perf timechart: Fix black idle boxes in the title

This fix is needed for eye of gnome and firefox svg viewers.
Only Inkscape can handle the broken case.

Compare with the other svg_legenda_box declarations, looks
like a typo slipped in at this place.

Signed-off-by: Thomas Renninger <trenn@suse.de>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: lenb@kernel.org
LKML-Reference: <1298842606-55712-5-git-send-email-trenn@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

8 years agoMerge remote branch 'nouveau/drm-nouveau-fixes' of /ssd/git/drm-nouveau-next into...
Dave Airlie [Mon, 28 Feb 2011 05:35:16 +0000]
Merge remote branch 'nouveau/drm-nouveau-fixes' of /ssd/git/drm-nouveau-next into drm-fixes

* 'nouveau/drm-nouveau-fixes' of /ssd/git/drm-nouveau-next:
  drm/nv50-nvc0: make sure vma is definitely unmapped when destroying bo

8 years agodrm: fix unsigned vs signed comparison issue in modeset ctl ioctl.
Dave Airlie [Wed, 23 Feb 2011 22:35:06 +0000]
drm: fix unsigned vs signed comparison issue in modeset ctl ioctl.

This fixes CVE-2011-1013.

Reported-by: Matthiew Herrb (OpenBSD X.org team)
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

8 years agodrm/nv50-nvc0: make sure vma is definitely unmapped when destroying bo
Ben Skeggs [Mon, 28 Feb 2011 04:22:12 +0000]
drm/nv50-nvc0: make sure vma is definitely unmapped when destroying bo

Somehow fixes a misrendering + hang at GDM startup on my NVA8...

My first guess would have been stale TLB entries laying around that a new
bo then accidentally inherits.  That doesn't make a great deal of sense
however, as when we mapped the pages for the new bo the TLBs would've
gotten flushed anyway.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

8 years agohwmon: (adt7411) add MODULE_DEVICE_TABLE
axel lin [Thu, 24 Feb 2011 02:22:01 +0000]
hwmon: (adt7411) add MODULE_DEVICE_TABLE

The device table is required to load modules based on modaliases.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>

8 years agohwmon: (ad7414) add MODULE_DEVICE_TABLE
axel lin [Thu, 24 Feb 2011 02:20:37 +0000]
hwmon: (ad7414) add MODULE_DEVICE_TABLE

The device table is required to load modules based on modaliases.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>

8 years agoMerge branch 'fix/asoc' into for-linus
Takashi Iwai [Sat, 26 Feb 2011 10:27:47 +0000]
Merge branch 'fix/asoc' into for-linus

8 years agoclockevents: Prevent oneshot mode when broadcast device is periodic
Thomas Gleixner [Fri, 25 Feb 2011 21:34:23 +0000]
clockevents: Prevent oneshot mode when broadcast device is periodic

When the per cpu timer is marked CLOCK_EVT_FEAT_C3STOP, then we only
can switch into oneshot mode, when the backup broadcast device
supports oneshot mode as well. Otherwise we would try to switch the
broadcast device into an unsupported mode unconditionally. This went
unnoticed so far as the current available broadcast devices support
oneshot mode. Seth unearthed this problem while debugging and working
around an hpet related BIOS wreckage.

Add the necessary check to tick_is_oneshot_available().

Reported-and-tested-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <alpine.LFD.2.00.1102252231200.2701@localhost6.localdomain6>
Cc: stable@kernel.org # .21 ->

8 years agoMerge branch 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspe...
Linus Torvalds [Fri, 25 Feb 2011 23:15:17 +0000]
Merge branch 'pm-fixes' of git://git./linux/kernel/git/rafael/suspend-2.6

* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
  PM: Make ACPI wakeup from S5 work again when CONFIG_PM_SLEEP is unset

8 years agorapidio: fix sysfs config attribute to access 16MB of maint space
Alexandre Bounine [Fri, 25 Feb 2011 22:44:31 +0000]
rapidio: fix sysfs config attribute to access 16MB of maint space

Fixes sysfs config attribute to allow access to entire 16MB maintenance
space of RapidIO devices.

Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Cc: Thomas Moll <thomas.moll@sysgo.com>
Cc: Micha Nelissen <micha@neli.hopto.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agopps: initialize ts_real properly
Alexander Gordeev [Fri, 25 Feb 2011 22:44:30 +0000]
pps: initialize ts_real properly

Initialize ts_real.flags to fix compiler warning about possible
uninitialized use of this field.

Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agomemcg: more mem_cgroup_uncharge() batching
Hugh Dickins [Fri, 25 Feb 2011 22:44:29 +0000]
memcg: more mem_cgroup_uncharge() batching

It seems odd that truncate_inode_pages_range(), called not only when
truncating but also when evicting inodes, has mem_cgroup_uncharge_start
and _end() batching in its second loop to clear up a few leftovers, but
not in its first loop that does almost all the work: add them there too.

Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agothp: fix interleaving for transparent hugepages
Andi Kleen [Fri, 25 Feb 2011 22:44:28 +0000]
thp: fix interleaving for transparent hugepages

The THP code didn't pass the correct interleaving shift to the memory
policy code.  Fix this here by adjusting for the order.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Christoph Lameter <cl@linux.com>
Acked-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoaio: fix race between io_destroy() and io_submit()
Jan Kara [Fri, 25 Feb 2011 22:44:27 +0000]
aio: fix race between io_destroy() and io_submit()

A race can occur when io_submit() races with io_destroy():

 CPU1 CPU2
io_submit()
  do_io_submit()
    ...
    ctx = lookup_ioctx(ctx_id);
io_destroy()
    Now do_io_submit() holds the last reference to ctx.
    ...
    queue new AIO
    put_ioctx(ctx) - frees ctx with active AIOs

We solve this issue by checking whether ctx is being destroyed in AIO
submission path after adding new AIO to ctx.  Then we are guaranteed that
either io_destroy() waits for new AIO or we see that ctx is being
destroyed and bail out.

Cc: Nick Piggin <npiggin@kernel.dk>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoaio: fix rcu ioctx lookup
Nick Piggin [Fri, 25 Feb 2011 22:44:26 +0000]
aio: fix rcu ioctx lookup

aio-dio-invalidate-failure GPFs in aio_put_req from io_submit.

lookup_ioctx doesn't implement the rcu lookup pattern properly.
rcu_read_lock does not prevent refcount going to zero, so we might take
a refcount on a zero count ioctx.

Fix the bug by atomically testing for zero refcount before incrementing.

[jack@suse.cz: added comment into the code]
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Nick Piggin <npiggin@kernel.dk>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agomm: fix dubious code in __count_immobile_pages()
Namhyung Kim [Fri, 25 Feb 2011 22:44:25 +0000]
mm: fix dubious code in __count_immobile_pages()

When pfn_valid_within() failed 'iter' was incremented twice.

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agodrivers/rtc/rtc-ds3232.c: fix time range difference between linux and RTC chip
Lei Xu [Fri, 25 Feb 2011 22:44:23 +0000]
drivers/rtc/rtc-ds3232.c: fix time range difference between linux and RTC chip

In linux rtc_time struct, tm_mon range is 0~11, tm_wday range is 0~6,
while in RTC HW REG, month range is 1~12, day of the week range is 1~7,
this patch adjusts difference of them.

The efect of this bug was that most of month will be operated on as the
next month by the hardware (When in Jan it maybe even worse).  For
example, if in May, software wrote 4 to the hardware, which handled it as
April.  Then the logic would be different between software and hardware,
which would cause weird things to happen.

Signed-off-by: Lei Xu <B33228@freescale.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Jack Lan <jack.lan@freescale.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoldm: corrupted partition table can cause kernel oops
Timo Warns [Fri, 25 Feb 2011 22:44:21 +0000]
ldm: corrupted partition table can cause kernel oops

The kernel automatically evaluates partition tables of storage devices.
The code for evaluating LDM partitions (in fs/partitions/ldm.c) contains
a bug that causes a kernel oops on certain corrupted LDM partitions.  A
kernel subsystem seems to crash, because, after the oops, the kernel no
longer recognizes newly connected storage devices.

The patch changes ldm_parse_vmdb() to Validate the value of vblk_size.

Signed-off-by: Timo Warns <warns@pre-sense.de>
Cc: Eugene Teo <eugeneteo@kernel.sg>
Acked-by: Richard Russon <ldm@flatcap.org>
Cc: Harvey Harrison <harvey.harrison@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agomm: vmscan: stop reclaim/compaction earlier due to insufficient progress if !__GFP_REPEAT
Mel Gorman [Fri, 25 Feb 2011 22:44:20 +0000]
mm: vmscan: stop reclaim/compaction earlier due to insufficient progress if !__GFP_REPEAT

should_continue_reclaim() for reclaim/compaction allows scanning to
continue even if pages are not being reclaimed until the full list is
scanned.  In terms of allocation success, this makes sense but potentially
it introduces unwanted latency for high-order allocations such as
transparent hugepages and network jumbo frames that would prefer to fail
the allocation attempt and fallback to order-0 pages.  Worse, there is a
potential that the full LRU scan will clear all the young bits, distort
page aging information and potentially push pages into swap that would
have otherwise remained resident.

This patch will stop reclaim/compaction if no pages were reclaimed in the
last SWAP_CLUSTER_MAX pages that were considered.  For allocations such as
hugetlbfs that use __GFP_REPEAT and have fewer fallback options, the full
LRU list may still be scanned.

Order-0 allocation should not be affected because RECLAIM_MODE_COMPACTION
is not set so the following avoids the gfp_mask being examined:

        if (!(sc->reclaim_mode & RECLAIM_MODE_COMPACTION))
                return false;

A tool was developed based on ftrace that tracked the latency of
high-order allocations while transparent hugepage support was enabled and
three benchmarks were run.  The "fix-infinite" figures are 2.6.38-rc4 with
Johannes's patch "vmscan: fix zone shrinking exit when scan work is done"
applied.

  STREAM Highorder Allocation Latency Statistics
                 fix-infinite     break-early
  1 :: Count            10298           10229
  1 :: Min             0.4560          0.4640
  1 :: Mean            1.0589          1.0183
  1 :: Max            14.5990         11.7510
  1 :: Stddev          0.5208          0.4719
  2 :: Count                2               1
  2 :: Min             1.8610          3.7240
  2 :: Mean            3.4325          3.7240
  2 :: Max             5.0040          3.7240
  2 :: Stddev          1.5715          0.0000
  9 :: Count           111696          111694
  9 :: Min             0.5230          0.4110
  9 :: Mean           10.5831         10.5718
  9 :: Max            38.4480         43.2900
  9 :: Stddev          1.1147          1.1325

Mean time for order-1 allocations is reduced.  order-2 looks increased but
with so few allocations, it's not particularly significant.  THP mean
allocation latency is also reduced.  That said, allocation time varies so
significantly that the reductions are within noise.

Max allocation time is reduced by a significant amount for low-order
allocations but reduced for THP allocations which presumably are now
breaking before reclaim has done enough work.

  SysBench Highorder Allocation Latency Statistics
                 fix-infinite     break-early
  1 :: Count            15745           15677
  1 :: Min             0.4250          0.4550
  1 :: Mean            1.1023          1.0810
  1 :: Max            14.4590         10.8220
  1 :: Stddev          0.5117          0.5100
  2 :: Count                1               1
  2 :: Min             3.0040          2.1530
  2 :: Mean            3.0040          2.1530
  2 :: Max             3.0040          2.1530
  2 :: Stddev          0.0000          0.0000
  9 :: Count             2017            1931
  9 :: Min             0.4980          0.7480
  9 :: Mean           10.4717         10.3840
  9 :: Max            24.9460         26.2500
  9 :: Stddev          1.1726          1.1966

Again, mean time for order-1 allocations is reduced while order-2
allocations are too few to draw conclusions from.  The mean time for THP
allocations is also slightly reduced albeit the reductions are within
varianes.

Once again, our maximum allocation time is significantly reduced for
low-order allocations and slightly increased for THP allocations.

  Anon stream mmap reference Highorder Allocation Latency Statistics
  1 :: Count             1376            1790
  1 :: Min             0.4940          0.5010
  1 :: Mean            1.0289          0.9732
  1 :: Max             6.2670          4.2540
  1 :: Stddev          0.4142          0.2785
  2 :: Count                1               -
  2 :: Min             1.9060               -
  2 :: Mean            1.9060               -
  2 :: Max             1.9060               -
  2 :: Stddev          0.0000               -
  9 :: Count            11266           11257
  9 :: Min             0.4990          0.4940
  9 :: Mean        27250.4669      24256.1919
  9 :: Max      11439211.0000    6008885.0000
  9 :: Stddev     226427.4624     186298.1430

This benchmark creates one thread per CPU which references an amount of
anonymous memory 1.5 times the size of physical RAM.  This pounds swap
quite heavily and is intended to exercise THP a bit.

Mean allocation time for order-1 is reduced as before.  It's also reduced
for THP allocations but the variations here are pretty massive due to
swap.  As before, maximum allocation times are significantly reduced.

Overall, the patch reduces the mean and maximum allocation latencies for
the smaller high-order allocations.  This was with Slab configured so it
would be expected to be more significant with Slub which uses these size
allocations more aggressively.

The mean allocation times for THP allocations are also slightly reduced.
The maximum latency was slightly increased as predicted by the comments
due to reclaim/compaction breaking early.  However, workloads care more
about the latency of lower-order allocations than THP so it's an
acceptable trade-off.

Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Acked-by: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agodrivers/nfc/pn544.c: add missing regulator
Matti J. Aaltonen [Fri, 25 Feb 2011 22:44:19 +0000]
drivers/nfc/pn544.c: add missing regulator

The regulator framework is used for power management.  The regulators are
only named in the driver code, the actual control stuff is in the board
file for each architecture or use case.

The PN544 chip has three regulators that can be controlled or not -
depending on the architecture where the chip is being used.  So some of
the regulators may not be controllable.  In our current case the third
regulator, which was missing from the code, went unnoticed because we
didn't need to control it.  To be as general as possible - in this respect
- the driver needs to list all regulators.  Then the board file can be
used to actually set the usage.

Signed-off-by: Matti J. Aaltonen <matti.j.aaltonen@nokia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agodrivers/nfc/Kconfig: use full form of the NFC acronym
Matti J. Aaltonen [Fri, 25 Feb 2011 22:44:18 +0000]
drivers/nfc/Kconfig: use full form of the NFC acronym

Spell out the NFC acronym when it's shown for the first time.

Signed-off-by: Matti J. Aaltonen <matti.j.aaltonen@nokia.com>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoswiotlb: fix wrong panic
FUJITA Tomonori [Fri, 25 Feb 2011 22:44:16 +0000]
swiotlb: fix wrong panic

swiotlb's map_page wrongly calls panic() when it can't find a buffer fit
for device's dma mask.  It should return an error instead.

Devices with an odd dma mask (i.e.  under 4G) like b44 network card hit
this bug (the system crashes):

   http://marc.info/?l=linux-kernel&m=129648943830106&w=2

If swiotlb returns an error, b44 driver can use the own bouncing
mechanism.

Reported-by: Chuck Ebbert <cebbert@redhat.com>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Tested-by: Arkadiusz Miskiewicz <arekm@maven.pl>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoMAINTAINERS: add Chinese documentation maintainer
Harry Wei [Fri, 25 Feb 2011 22:44:15 +0000]
MAINTAINERS: add Chinese documentation maintainer

I have translated some kernel documentation so I wish to maintain the
Chinese documentation in our kernel directories.

Signed-off-by: Harry Wei <harryxiyou@gmail.com>
Cc: Joe Perches <joe@perches.com>
Cc: Greg KH <greg@kroah.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agomm: grab rcu read lock in move_pages()
Greg Thelen [Fri, 25 Feb 2011 22:44:13 +0000]
mm: grab rcu read lock in move_pages()

The move_pages() usage of find_task_by_vpid() requires rcu_read_lock() to
prevent free_pid() from reclaiming the pid.

Without this patch, RCU warnings are printed in v2.6.38-rc4 move_pages()
with:

  CONFIG_LOCKUP_DETECTOR=y
  CONFIG_PREEMPT=y
  CONFIG_LOCKDEP=y
  CONFIG_PROVE_LOCKING=y
  CONFIG_PROVE_RCU=y

Previously, migrate_pages() went through a similar transformation
replacing usage of tasklist_lock with rcu read lock:

  commit 55cfaa3cbdd29c4919ecb5fb8965c310f357e48c
  Author: Zeng Zhaoming <zengzm.kernel@gmail.com>
  Date:   Thu Dec 2 14:31:13 2010 -0800

      mm/mempolicy.c: add rcu read lock to protect pid structure

  commit 1e50df39f6e2c3a4a3394df62baa8a213df16c54
  Author: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
  Date:   Thu Jan 13 15:46:14 2011 -0800

      mempolicy: remove tasklist_lock from migrate_pages

Signed-off-by: Greg Thelen <gthelen@google.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Zeng Zhaoming <zengzm.kernel@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoepoll: prevent creating circular epoll structures
Davide Libenzi [Fri, 25 Feb 2011 22:44:12 +0000]
epoll: prevent creating circular epoll structures

In several places, an epoll fd can call another file's ->f_op->poll()
method with ep->mtx held.  This is in general unsafe, because that other
file could itself be an epoll fd that contains the original epoll fd.

The code defends against this possibility in its own ->poll() method using
ep_call_nested, but there are several other unsafe calls to ->poll
elsewhere that can be made to deadlock.  For example, the following simple
program causes the call in ep_insert recursively call the original fd's
->poll, leading to deadlock:

 #include <unistd.h>
 #include <sys/epoll.h>

 int main(void) {
     int e1, e2, p[2];
     struct epoll_event evt = {
         .events = EPOLLIN
     };

     e1 = epoll_create(1);
     e2 = epoll_create(2);
     pipe(p);

     epoll_ctl(e2, EPOLL_CTL_ADD, e1, &evt);
     epoll_ctl(e1, EPOLL_CTL_ADD, p[0], &evt);
     write(p[1], p, sizeof p);
     epoll_ctl(e1, EPOLL_CTL_ADD, e2, &evt);

     return 0;
 }

On insertion, check whether the inserted file is itself a struct epoll,
and if so, do a recursive walk to detect whether inserting this file would
create a loop of epoll structures, which could lead to deadlock.

[nelhage@ksplice.com: Use epmutex to serialize concurrent inserts]
Signed-off-by: Davide Libenzi <davidel@xmailserver.org>
Signed-off-by: Nelson Elhage <nelhage@ksplice.com>
Reported-by: Nelson Elhage <nelhage@ksplice.com>
Tested-by: Nelson Elhage <nelhage@ksplice.com>
Cc: <stable@kernel.org> [2.6.34+, possibly earlier]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6
Linus Torvalds [Fri, 25 Feb 2011 22:04:44 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/lrg/voltage-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6:
  regulator, mc13xxx: Remove pointless test for unsigned less than zero
  regulator: Fix warning with CONFIG_BUG disabled

8 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable
Linus Torvalds [Fri, 25 Feb 2011 22:03:39 +0000]
Merge git://git./linux/kernel/git/mason/btrfs-unstable

* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
  Btrfs: fix fiemap bugs with delalloc
  Btrfs: set FMODE_EXCL in btrfs_device->mode
  Btrfs: make btrfs_rm_device() fail gracefully
  Btrfs: Avoid accessing unmapped kernel address
  Btrfs: Fix BTRFS_IOC_SUBVOL_SETFLAGS ioctl
  Btrfs: allow balance to explicitly allocate chunks as it relocates
  Btrfs: put ENOSPC debugging under a mount option

8 years agoMerge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Fri, 25 Feb 2011 22:02:33 +0000]
Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86 quirk: Fix polarity for IRQ0 pin2 override on SB800 systems
  x86/mrst: Fix apb timer rating when lapic timer is used
  x86: Fix reboot problem on VersaLogic Menlow boards

8 years agoRTC: fix typo in drivers/rtc/rtc-at91sam9.c
Jelle Martijn Kok [Fri, 25 Feb 2011 19:13:55 +0000]
RTC: fix typo in drivers/rtc/rtc-at91sam9.c

The member of the rtc_class_ops struct is called alarm_irq_enable and
not alarm_irq_enabled

CC: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jelle Martijn Kok <jmkok@youcom.nl>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoMerge branch 'patches_for_2.6.38rc' of git://git.pwsan.com/linux-2.6 into devel-fixes
Tony Lindgren [Fri, 25 Feb 2011 20:27:14 +0000]
Merge branch 'patches_for_2.6.38rc' of git://git.pwsan.com/linux-2.6 into devel-fixes

8 years agoomap4: prcm: Fix the CPUx clockdomain offsets
Santosh Shilimkar [Fri, 4 Feb 2011 09:58:57 +0000]
omap4: prcm: Fix the CPUx clockdomain offsets

CPU0 and CPU1 clockdomain is at the offset of 0x18 from the LPRM base.
The header file has set it wrongly to 0x0. Offset 0x0 is for CPUx power
domain control register

Fix the same.

The autogen scripts is fixed thanks to Benoit Cousson

With the old value, the clockdomain code would access the
*_PWRSTCTRL.POWERSTATE field when it thought it was accessing the
*_CLKSTCTRL.CLKTRCTRL field.  In the worst case, this could cause
system power management to behave incorrectly.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Benoit Cousson <b-cousson@ti.com>
[paul@pwsan.com: added second paragraph to commit message]
Signed-off-by: Paul Walmsley <paul@pwsan.com>

8 years agoMerge branch 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh...
Linus Torvalds [Fri, 25 Feb 2011 19:14:44 +0000]
Merge branch 'usb-linus' of git://git./linux/kernel/git/gregkh/usb-2.6

* 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  usb: musb: core: set has_tt flag
  USB: xhci: mark local functions as static
  USB: xhci: fix couple sparse annotations
  USB: xhci: rework xhci_print_ir_set() to get ir set from xhci itself
  USB: Reset USB 3.0 devices on (re)discovery
  xhci: Fix an error in count_sg_trbs_needed()
  xhci: Fix errors in the running total calculations in the TRB math
  xhci: Clarify some expressions in the TRB math
  xhci: Avoid BUG() in interrupt context

8 years agoMerge branch 'for-linus' of git://neil.brown.name/md
Linus Torvalds [Fri, 25 Feb 2011 19:13:26 +0000]
Merge branch 'for-linus' of git://neil.brown.name/md

* 'for-linus' of git://neil.brown.name/md:
  md: Fix - again - partition detection when array becomes active
  Fix over-zealous flush_disk when changing device size.
  md: avoid spinlock problem in blk_throtl_exit
  md: correctly handle probe of an 'mdp' device.
  md: don't set_capacity before array is active.
  md: Fix raid1->raid0 takeover

8 years agoRxRPC: Allocate tokens with kzalloc to avoid oops in rxrpc_destroy
Anton Blanchard [Fri, 25 Feb 2011 15:33:17 +0000]
RxRPC: Allocate tokens with kzalloc to avoid oops in rxrpc_destroy

With slab poisoning enabled, I see the following oops:

  Unable to handle kernel paging request for data at address 0x6b6b6b6b6b6b6b73
  ...
  NIP [c0000000006bc61c] .rxrpc_destroy+0x44/0x104
  LR [c0000000006bc618] .rxrpc_destroy+0x40/0x104
  Call Trace:
  [c0000000feb2bc00] [c0000000006bc618] .rxrpc_destroy+0x40/0x104 (unreliable)
  [c0000000feb2bc90] [c000000000349b2c] .key_cleanup+0x1a8/0x20c
  [c0000000feb2bd40] [c0000000000a2920] .process_one_work+0x2f4/0x4d0
  [c0000000feb2be00] [c0000000000a2d50] .worker_thread+0x254/0x468
  [c0000000feb2bec0] [c0000000000a868c] .kthread+0xbc/0xc8
  [c0000000feb2bf90] [c000000000020e00] .kernel_thread+0x54/0x70

We aren't initialising token->next, but the code in destroy_context relies
on the list being NULL terminated. Use kzalloc to zero out all the fields.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>