12 years agoFirmware: add iSCSI iBFT Support
Konrad Rzeszutek [Thu, 10 Apr 2008 02:50:41 +0000]
Firmware: add iSCSI iBFT Support

Add /sysfs/firmware/ibft/[initiator|targetX|ethernetX] directories along with
text properties which export the the iSCSI Boot Firmware Table (iBFT)
structure.

What is iSCSI Boot Firmware Table?  It is a mechanism for the iSCSI tools to
extract from the machine NICs the iSCSI connection information so that they
can automagically mount the iSCSI share/target.  Currently the iSCSI
information is hard-coded in the initrd.  The /sysfs entries are read-only
one-name-and-value fields.

The usual set of data exposed is:

# for a in `find /sys/firmware/ibft/ -type f -print`; do  echo -n "$a: ";  cat $a; done
/sys/firmware/ibft/target0/target-name: iqn.2007.com.intel-sbx44:storage-10gb
/sys/firmware/ibft/target0/nic-assoc: 0
/sys/firmware/ibft/target0/chap-type: 0
/sys/firmware/ibft/target0/lun: 00000000
/sys/firmware/ibft/target0/port: 3260
/sys/firmware/ibft/target0/ip-addr: 192.168.79.116
/sys/firmware/ibft/target0/flags: 3
/sys/firmware/ibft/target0/index: 0
/sys/firmware/ibft/ethernet0/mac: 00:11:25:9d:8b:01
/sys/firmware/ibft/ethernet0/vlan: 0
/sys/firmware/ibft/ethernet0/gateway: 192.168.79.254
/sys/firmware/ibft/ethernet0/origin: 0
/sys/firmware/ibft/ethernet0/subnet-mask: 255.255.252.0
/sys/firmware/ibft/ethernet0/ip-addr: 192.168.77.41
/sys/firmware/ibft/ethernet0/flags: 7
/sys/firmware/ibft/ethernet0/index: 0
/sys/firmware/ibft/initiator/initiator-name: iqn.2007-07.com:konrad.initiator
/sys/firmware/ibft/initiator/flags: 3
/sys/firmware/ibft/initiator/index: 0

For full details of the IBFT structure please take a look at:
ftp://ftp.software.ibm.com/systems/support/system_x_pdf/ibm_iscsi_boot_firmware_table_v1.02.pdf

[akpm@linux-foundation.org: fix build]
Signed-off-by: Konrad Rzeszutek <konradr@linux.vnet.ibm.com>
Cc: Mike Christie <michaelc@cs.wisc.edu>
Cc: Peter Jones <pjones@redhat.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years agoPM: Remove legacy PM (fix)
Randy Dunlap [Fri, 28 Mar 2008 21:22:52 +0000]
PM: Remove legacy PM (fix)

Source file was removed.  Need to remove docbook reference also.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Pavel Machek <pavel@suse.cz>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years agoKobject: Replace list_for_each() with list_for_each_entry().
Robert P. J. Day [Thu, 27 Mar 2008 05:13:34 +0000]
Kobject: Replace list_for_each() with list_for_each_entry().

Use the more concise list_for_each_entry(), which allows for the
deletion of the to_kobj() routine at the same time.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years agoSYSFS: Explicitly include required header file slab.h.
Robert P. J. Day [Fri, 14 Mar 2008 02:41:52 +0000]
SYSFS: Explicitly include required header file slab.h.

After an experimental deletion of the unnecessary inclusion of
<linux/slab.h> from the header file <linux/percpu.h>, the following
files under fs/sysfs were exposed as needing to explicitly include
<linux/slab.h>.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years agoDriver core: make device_is_registered() work for class devices
Greg Kroah-Hartman [Thu, 13 Mar 2008 21:07:03 +0000]
Driver core: make device_is_registered() work for class devices

device_is_registered() can use the kobject value for this, so it will
now work with devices that are associated with only a class, not a bus
and a driver.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years agoPM: Convert wakeup flag accessors to inline functions
Alan Stern [Wed, 19 Mar 2008 21:39:13 +0000]
PM: Convert wakeup flag accessors to inline functions

This patch (as1058) improves the wakeup macros in include/linux/pm.h.
All but the trivial ones are converted to inline routines, which
requires moving them to a separate header file since they depend on
the definition of struct device.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years agoPM: Make wakeup flags available whenever CONFIG_PM is set
Alan Stern [Wed, 19 Mar 2008 21:37:42 +0000]
PM: Make wakeup flags available whenever CONFIG_PM is set

The various wakeup flags and their accessor macros in struct
dev_pm_info should be available whenever CONFIG_PM is enabled, not
just when CONFIG_PM_SLEEP is on.  Otherwise remote wakeup won't always
be configurable for runtime power management.  This patch (as1056b)
fixes the oversight.

David Brownell adds:
More accurately, fixes the "regression" ... as noted sometime
last summer, after 296699de6bdc717189a331ab6bbe90e05c94db06
introduced CONFIG_SUSPEND.  But that didn't make the regression
list for that kernel, ergo the delay in fixing it.

[rjw: rebased]

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years agoPM: Fix misuse of wakeup flag accessors in serial core
Alan Stern [Wed, 19 Mar 2008 21:35:13 +0000]
PM: Fix misuse of wakeup flag accessors in serial core

This patch (as1059) fixes a mistake in the way the serial core
initializes a device's wakeup settings.  It should use the accessor
routine instead of relying on a macro producing an lvalue.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years agoDriver core: Call device_pm_add() after bus_add_device() in device_add()
Rafael J. Wysocki [Tue, 11 Mar 2008 23:59:38 +0000]
Driver core: Call device_pm_add() after bus_add_device() in device_add()

Include dpm_sysfs_add() into device_pm_add(), in analogy with
device_pm_remove(), and modify device_add() to call the latter after
bus_add_device(), to avoid situations in which the PM core may
attempt to suspend a device the registration of which has not been
successful.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years agoPM: Handle device registrations during suspend/resume
Rafael J. Wysocki [Tue, 11 Mar 2008 23:57:22 +0000]
PM: Handle device registrations during suspend/resume

Modify the PM core to protect its data structures, specifically the
dpm_active list, from being corrupted if a child of the currently
suspending device is registered concurrently with its ->suspend()
callback.  In that case, since the new device (the child) is added
to dpm_active after its parent, the PM core will attempt to
suspend it after the parent, which is wrong.

Introduce a new member of struct dev_pm_info, called 'sleeping',
and use it to check if the parent of the device being added to
dpm_active has been suspended, in which case the device registration
fails.  Also, use 'sleeping' for checking if the ordering of devices
on dpm_active is correct.

Introduce variable 'all_sleeping' that will be set to 'true' once all
devices have been suspended and make new device registrations fail
until 'all_sleeping' is reset to 'false', in order to avoid having
unsuspended devices around while the system is going into a sleep state.

Remove pm_sleep_rwsem which is not necessary any more.

Special thanks to Alan Stern for discussions and suggestions that
lead to the creation of this patch.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years agoblock: send disk "change" event for rescan_partitions()
Kay Sievers [Sun, 9 Mar 2008 20:26:02 +0000]
block: send disk "change" event for rescan_partitions()

Userspace likes to get notified that the disk may have changed, when
rescan_partitions() is called after partitioning or media change. It will
make it possible to update the state of the disk with the "change" event,
before the following partition "add" events are handled.

Cc: David Zeuthen <david@fubar.dk>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years agosysdev: detect multiple driver registrations
Ben Dooks [Tue, 4 Mar 2008 23:09:06 +0000]
sysdev: detect multiple driver registrations

I've just found how easy it is to accidentally register a sysdev_driver for
two different classes.  When this happens, bad things happen as the
sysdev_driver structure keeps has the list entry for the driver
registration.

The following patch makes a WARN_ON() if this happens, although I think
BUG_ON or returning -EAGAIN could also be valid responses to this.

Signed-off-by: Ben Dooks <ben@fluff.org>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years agodriver core: cpu: fix section mismatch in cpu.c:store_online
Sam Ravnborg [Tue, 4 Mar 2008 23:09:05 +0000]
driver core: cpu: fix section mismatch in cpu.c:store_online

Fix following warning:
WARNING: vmlinux.o(.text+0x64609c): Section mismatch in reference from the function store_online() to the function .cpuinit.text:cpu_up()

store_online() is defined inside a HOTPLUG_CPU block so references are OK.
Ignore references by annotating store_online() with __ref.

Note: This is needed because cpu_up() most likely should not have been
__cpuinit but all the hotplug cpu code misuses the __cpuinit annotation.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years agopower_state: remove it from driver core
Pavel Machek [Thu, 21 Feb 2008 12:58:10 +0000]
power_state: remove it from driver core

power_state is scheduled for removal, and it is used only for debug
prints by driver core. Remove it.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years agoPNP: add all PNP card device id's as individual aliases
Kay Sievers [Wed, 20 Feb 2008 23:35:54 +0000]
PNP: add all PNP card device id's as individual aliases

The current PNP combined card + devices module aliase can
never ever match anything, because these values are not available
all at the same time to request a module.

Instead of adding the combined alias, we add the device id's
all as individual aliases. Device id's are exported by the PNP
bus and can now properly used to request the loading of a
matching module.

The module snd-sbawe currently exports aliases, which can never
match anything:
  alias: pnp:cCTLXXXXdCTL0045dCTL0022*
  alias: pnp:cCTLXXXXdCTL0044dCTL0023*
  alias: pnp:cCTLXXXXdCTL0042dCTL0022*
  alias: pnp:cCTLXXXXdCTL0041dCTL0021*
  alias: pnp:cCTLXXXXdCTL0031dCTL0021*
  alias: pnp:cCTL00eddCTL0041dCTL0070*
  alias: pnp:cCTL00e9dCTL0045dCTL0022*
  alias: pnp:cCTL00e4dCTL0045dCTL0022*
  alias: pnp:cCTL00c7dCTL0045dCTL0022*
  alias: pnp:cCTL00c5dCTL0045dCTL0022*
  alias: pnp:cCTL00c3dCTL0045dCTL0022*
  alias: pnp:cCTL00c1dCTL0042dCTL0022*
  alias: pnp:cCTL00b2dCTL0044dCTL0023*
  alias: pnp:cCTL009edCTL0044dCTL0023*
  alias: pnp:cCTL009ddCTL0042dCTL0022*
  alias: pnp:cCTL009fdCTL0041dCTL0021*
  alias: pnp:cCTL009cdCTL0041dCTL0021*
  alias: pnp:cCTL009adCTL0041dCTL0021*
  alias: pnp:cCTL0054dCTL0031dCTL0021*
  alias: pnp:cCTL0048dCTL0031dCTL0021*
  alias: pnp:cCTL0047dCTL0031dCTL0021*
  alias: pnp:cCTL0046dCTL0031dCTL0021*
  alias: pnp:cCTL0045dCTL0031dCTL0021*
  alias: pnp:cCTL0044dCTL0031dCTL0021*
  alias: pnp:cCTL0043dCTL0031dCTL0021*
  alias: pnp:cCTL0042dCTL0031dCTL0021*
  alias: pnp:cCTL0039dCTL0031dCTL0021*
  alias: pnp:cCTL0035dCTL0031dCTL0021*

With this patch it exports only the device id's, as properly
matchable aliases:
  alias: pnp:dCTL0070*
  alias: pnp:dCTL0045*
  alias: pnp:dCTL0023*
  alias: pnp:dCTL0044*
  alias: pnp:dCTL0022*
  alias: pnp:dCTL0042*
  alias: pnp:dCTL0041*
  alias: pnp:dCTL0021*
  alias: pnp:dCTL0031*

Now, the exported value of the PNP bus can be used to autoload
a matching module:
  $ modprobe --first-time -n -v pnp:dCTL0045
  insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/core/snd-rawmidi.ko
  insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/drivers/mpu401/snd-mpu401-uart.ko
  insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/core/snd-hwdep.ko
  insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/isa/sb/snd-sb-common.ko
  insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/isa/sb/snd-sb16-csp.ko
  insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/isa/sb/snd-sb16-dsp.ko
  insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/drivers/opl3/snd-opl3-lib.ko
  insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/isa/sb/snd-sbawe.ko

  $ grep CTL0045 /sys/bus/pnp/devices/*/id
  /sys/bus/pnp/devices/01:01.00/id:CTL0045

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years agofirmware: clean up samples for coding style issues
Greg Kroah-Hartman [Thu, 21 Feb 2008 00:07:07 +0000]
firmware: clean up samples for coding style issues

This fixes up a number of coding style issues in the firmware sample files.

Yeah, it still doesn't build properly yet, that's next...

Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years agofirmware: move firmware_class from Documentation/ to samples/
Randy Dunlap [Wed, 20 Feb 2008 21:20:50 +0000]
firmware: move firmware_class from Documentation/ to samples/

Move the firmware_class sample drivers to samples/ so that they are
buildable and can be maintained.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years agosysfs: small header file cleanup for SYSFS=n
David Rientjes [Wed, 20 Feb 2008 01:39:02 +0000]
sysfs: small header file cleanup for SYSFS=n

Convert sysfs_remove_bin_file() to have a return type of 'void' for
!CONFIG_SYSFS configurations.  Also removes unnecessary colons from empty
void functions.

Signed-off-by: David Rientjes <rientjes@google.com>
Reviewed-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years agodriver core: Convert debug functions declared inline __attribute__((format (printf...
Joe Perches [Wed, 27 Feb 2008 03:08:42 +0000]
driver core: Convert debug functions declared inline __attribute__((format (printf,x,y) to statement expression macros

When DEBUG is not defined, pr_debug and dev_dbg and some
other local debugging functions are specified as:

"inline __attribute__((format (printf, x, y)))"

This is done to validate printk arguments when not debugging.

Converting these functions to macros or statement expressions
"do { if (0) printk(fmt, ##arg); } while (0)"
or
"({ if (0) printk(fmt, ##arg); 0; })
makes at least gcc 4.2.2 produce smaller objects.

This has the additional benefit of allowing the optimizer to
avoid calling functions like print_mac that might have been
arguments to the printk.

defconfig x86 current:

$ size vmlinux
   text    data     bss     dec     hex filename
4716770  474560  618496 5809826  58a6a2 vmlinux

all converted: (More patches follow)

$ size vmlinux
   text    data     bss     dec     hex filename
4716642  474560  618496 5809698  58a622 vmlinux

Even kernel/sched.o, which doesn't even use these
functions, becomes smaller.

It appears that merely having an indirect include
of <linux/device.h> can cause bigger objects.

$ size sched.inline.o sched.if0.o
   text    data     bss     dec     hex filename
  31385    2854     328   34567    8707 sched.inline.o
  31366    2854     328   34548    86f4 sched.if0.o

The current preprocessed only kernel/sched.i file contains:

# 612 "include/linux/device.h"
static inline __attribute__((always_inline)) int __attribute__ ((format (printf, 2, 3)))
dev_dbg(struct device *dev, const char *fmt, ...)
{
 return 0;
}
# 628 "include/linux/device.h"
static inline __attribute__((always_inline)) int __attribute__ ((format (printf, 2, 3)))
dev_vdbg(struct device *dev, const char *fmt, ...)
{
 return 0;
}

Removing these unused inlines from sched.i shrinks sched.o

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years agodriver core: register_memory/unregister_memory clean ups and bugfix
Badari Pulavarty [Mon, 11 Feb 2008 17:23:18 +0000]
driver core: register_memory/unregister_memory clean ups and bugfix

register_memory()/unregister_memory() never gets called with
"root". unregister_memory() is accessing kobject_name of
the object just freed up. Since no one uses the code,
lets take the code out. And also, make register_memory() static.

Another bug fix - before calling unregister_memory()
remove_memory_block() gets a ref on kobject. unregister_memory()
need to drop that ref before calling sysdev_unregister().

Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years agodriver core: memory: semaphore to mutex
Daniel Walker [Tue, 5 Feb 2008 07:35:47 +0000]
driver core: memory: semaphore to mutex

Signed-off-by: Daniel Walker <dwalker@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years agoUIO: hold a reference to the device's owner while the device is open
Uwe Kleine-König [Fri, 11 Apr 2008 09:07:39 +0000]
UIO: hold a reference to the device's owner while the device is open

Otherwise the device might just disappear while /dev/uioX is being used
which results in an Oops.

Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
Signed-off-by: Hans J Koch <hjk@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years agoUIO: Implement a UIO interface for the SMX Cryptengine
Ben Nizette [Thu, 13 Mar 2008 11:27:30 +0000]
UIO: Implement a UIO interface for the SMX Cryptengine

This patch implements a UIO interface for the SMX Cryptengine.

The Cryptengine found on the Nias Digital SMX board is best suited
for a UIO interface.  It is not wired in to the cryptographic API
as the engine handles it's own keys, algorithms, everything.  All
that we know about is that if there's room in the buffer, you can
write data to it and when there's data ready, you read it out again.

There isn't necessarily even any direct correlation between data
going in and data coming out again, the engine may consume or
generate data all on its own.

This driver is for proprietary hardware but we're always told to
submit the drivers anyway; here you are.  :-)

This is version 4 of this patch and addresses all issues raised by
Hans-Jürgen Koch and Paul Mundt in their reviews.  Slightly altered
is Paul's suggestion to use DRV_NAME and DRV_VERSION as the UIO
version and name.  While at the moment they are the same, there
is no reason for them to stay that way.  Nevertheless we now at
least provide a MODULE_VERSION macro to keep modinfo happy.

Signed-off-by: Ben Nizette <bn@niasdigital.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Hans J Koch <hjk@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years agoUIO: Remove needless PCI_DEVICE_ID definition from uio_cif.c
Hans-Jürgen Koch [Sun, 3 Feb 2008 00:48:28 +0000]
UIO: Remove needless PCI_DEVICE_ID definition from uio_cif.c

Meanwhile, PCI_DEVICE_ID_PLX_9030 is defined in pci_ids.h, no need to
define it again in the driver.

Signed-off-by: Hans J. Koch <hjk@linutronix.de>
CC: Benedikt Spranger <b.spranger@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years agoUIO: arch/arm/Kconfig: Make UIO available on ARM architecture
Hans-Jürgen Koch [Tue, 19 Feb 2008 20:07:19 +0000]
UIO: arch/arm/Kconfig: Make UIO available on ARM architecture

Source drivers/uio/Kconfig to make UIO available in menuconfig if ARCH=arm.

Signed-off-by: Hans J Koch <hjk@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years agouio: mark pci_device_id hilscher_pci_ids[] __devinitdata
Denis Cheng [Sat, 2 Feb 2008 09:51:36 +0000]
uio: mark pci_device_id hilscher_pci_ids[] __devinitdata

Signed-off-by: Denis Cheng <crquan@gmail.com>
Signed-off-by: Hans J. Koch <hjk@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years agouio: Kconfig improvements
Denis Cheng [Sat, 2 Feb 2008 09:51:35 +0000]
uio: Kconfig improvements

Signed-off-by: Denis Cheng <crquan@gmail.com>
Signed-off-by: Hans J. Koch <hjk@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years agokobject: catch kobjects that are not initialized
Greg Kroah-Hartman [Tue, 26 Feb 2008 17:36:38 +0000]
kobject: catch kobjects that are not initialized

Add warnings to kobject_put() to catch kobjects that are cleaned up but
were never initialized to begin with.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris...
Linus Torvalds [Sat, 19 Apr 2008 01:18:30 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
  security: fix up documentation for security_module_enable
  Security: Introduce security= boot parameter
  Audit: Final renamings and cleanup
  SELinux: use new audit hooks, remove redundant exports
  Audit: internally use the new LSM audit hooks
  LSM/Audit: Introduce generic Audit LSM hooks
  SELinux: remove redundant exports
  Netlink: Use generic LSM hook
  Audit: use new LSM hooks instead of SELinux exports
  SELinux: setup new inode/ipc getsecid hooks
  LSM: Introduce inode_getsecid and ipc_getsecid hooks

12 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.26
Linus Torvalds [Sat, 19 Apr 2008 01:02:35 +0000]
Merge git://git./linux/kernel/git/davem/net-2.6.26

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.26: (1090 commits)
  [NET]: Fix and allocate less memory for ->priv'less netdevices
  [IPV6]: Fix dangling references on error in fib6_add().
  [NETLABEL]: Fix NULL deref in netlbl_unlabel_staticlist_gen() if ifindex not found
  [PKT_SCHED]: Fix datalen check in tcf_simp_init().
  [INET]: Uninline the __inet_inherit_port call.
  [INET]: Drop the inet_inherit_port() call.
  SCTP: Initialize partial_bytes_acked to 0, when all of the data is acked.
  [netdrvr] forcedeth: internal simplifications; changelog removal
  phylib: factor out get_phy_id from within get_phy_device
  PHY: add BCM5464 support to broadcom PHY driver
  cxgb3: Fix __must_check warning with dev_dbg.
  tc35815: Statistics cleanup
  natsemi: fix MMIO for PPC 44x platforms
  [TIPC]: Cleanup of TIPC reference table code
  [TIPC]: Optimized initialization of TIPC reference table
  [TIPC]: Remove inlining of reference table locking routines
  e1000: convert uint16_t style integers to u16
  ixgb: convert uint16_t style integers to u16
  sb1000.c: make const arrays static
  sb1000.c: stop inlining largish static functions
  ...

12 years agosecurity: fix up documentation for security_module_enable
James Morris [Fri, 7 Mar 2008 01:23:49 +0000]
security: fix up documentation for security_module_enable

security_module_enable() can only be called during kernel init.

Signed-off-by: James Morris <jmorris@namei.org>

12 years agoSecurity: Introduce security= boot parameter
Ahmed S. Darwish [Thu, 6 Mar 2008 16:09:10 +0000]
Security: Introduce security= boot parameter

Add the security= boot parameter. This is done to avoid LSM
registration clashes in case of more than one bult-in module.

User can choose a security module to enable at boot. If no
security= boot parameter is specified, only the first LSM
asking for registration will be loaded. An invalid security
module name will be treated as if no module has been chosen.

LSM modules must check now if they are allowed to register
by calling security_module_enable(ops) first. Modify SELinux
and SMACK to do so.

Do not let SMACK register smackfs if it was not chosen on
boot. Smackfs assumes that smack hooks are registered and
the initial task security setup (swapper->security) is done.

Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com>
Acked-by: James Morris <jmorris@namei.org>

12 years agoAudit: Final renamings and cleanup
Ahmed S. Darwish [Fri, 18 Apr 2008 23:59:43 +0000]
Audit: Final renamings and cleanup

Rename the se_str and se_rule audit fields elements to
lsm_str and lsm_rule to avoid confusion.

Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com>
Acked-by: James Morris <jmorris@namei.org>

12 years agoSELinux: use new audit hooks, remove redundant exports
Ahmed S. Darwish [Sat, 1 Mar 2008 20:03:14 +0000]
SELinux: use new audit hooks, remove redundant exports

Setup the new Audit LSM hooks for SELinux.
Remove the now redundant exported SELinux Audit interface.

Audit: Export 'audit_krule' and 'audit_field' to the public
since their internals are needed by the implementation of the
new LSM hook 'audit_rule_known'.

Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com>
Acked-by: James Morris <jmorris@namei.org>

12 years agoAudit: internally use the new LSM audit hooks
Ahmed S. Darwish [Sat, 1 Mar 2008 20:01:11 +0000]
Audit: internally use the new LSM audit hooks

Convert Audit to use the new LSM Audit hooks instead of
the exported SELinux interface.

Basically, use:
security_audit_rule_init
secuirty_audit_rule_free
security_audit_rule_known
security_audit_rule_match

instad of (respectively) :
selinux_audit_rule_init
selinux_audit_rule_free
audit_rule_has_selinux
selinux_audit_rule_match

Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com>
Acked-by: James Morris <jmorris@namei.org>

12 years agoLSM/Audit: Introduce generic Audit LSM hooks
Ahmed S. Darwish [Sat, 1 Mar 2008 20:00:05 +0000]
LSM/Audit: Introduce generic Audit LSM hooks

Introduce a generic Audit interface for security modules
by adding the following new LSM hooks:

audit_rule_init(field, op, rulestr, lsmrule)
audit_rule_known(krule)
audit_rule_match(secid, field, op, rule, actx)
audit_rule_free(rule)

Those hooks are only available if CONFIG_AUDIT is enabled.

Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com>
Acked-by: James Morris <jmorris@namei.org>
Reviewed-by: Paul Moore <paul.moore@hp.com>

12 years agoSELinux: remove redundant exports
Ahmed S. Darwish [Sat, 1 Mar 2008 19:58:32 +0000]
SELinux: remove redundant exports

Remove the following exported SELinux interfaces:
selinux_get_inode_sid(inode, sid)
selinux_get_ipc_sid(ipcp, sid)
selinux_get_task_sid(tsk, sid)
selinux_sid_to_string(sid, ctx, len)

They can be substitued with the following generic equivalents
respectively:
new LSM hook, inode_getsecid(inode, secid)
new LSM hook, ipc_getsecid*(ipcp, secid)
LSM hook, task_getsecid(tsk, secid)
LSM hook, sid_to_secctx(sid, ctx, len)

Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com>
Acked-by: James Morris <jmorris@namei.org>
Reviewed-by: Paul Moore <paul.moore@hp.com>

12 years agoNetlink: Use generic LSM hook
Ahmed S. Darwish [Sat, 1 Mar 2008 19:56:22 +0000]
Netlink: Use generic LSM hook

Don't use SELinux exported selinux_get_task_sid symbol.
Use the generic LSM equivalent instead.

Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com>
Acked-by: James Morris <jmorris@namei.org>
Acked-by: David S. Miller <davem@davemloft.net>
Reviewed-by: Paul Moore <paul.moore@hp.com>

12 years agoAudit: use new LSM hooks instead of SELinux exports
Ahmed S. Darwish [Sat, 1 Mar 2008 19:54:38 +0000]
Audit: use new LSM hooks instead of SELinux exports

Stop using the following exported SELinux interfaces:
selinux_get_inode_sid(inode, sid)
selinux_get_ipc_sid(ipcp, sid)
selinux_get_task_sid(tsk, sid)
selinux_sid_to_string(sid, ctx, len)
kfree(ctx)

and use following generic LSM equivalents respectively:
security_inode_getsecid(inode, secid)
security_ipc_getsecid*(ipcp, secid)
security_task_getsecid(tsk, secid)
security_sid_to_secctx(sid, ctx, len)
security_release_secctx(ctx, len)

Call security_release_secctx only if security_secid_to_secctx
succeeded.

Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com>
Acked-by: James Morris <jmorris@namei.org>
Reviewed-by: Paul Moore <paul.moore@hp.com>

12 years agoSELinux: setup new inode/ipc getsecid hooks
Ahmed S. Darwish [Sat, 1 Mar 2008 19:52:30 +0000]
SELinux: setup new inode/ipc getsecid hooks

Setup the new inode_getsecid and ipc_getsecid() LSM hooks
for SELinux.

Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com>
Acked-by: James Morris <jmorris@namei.org>
Reviewed-by: Paul Moore <paul.moore@hp.com>

12 years agoLSM: Introduce inode_getsecid and ipc_getsecid hooks
Ahmed S. Darwish [Sat, 1 Mar 2008 19:51:09 +0000]
LSM: Introduce inode_getsecid and ipc_getsecid hooks

Introduce inode_getsecid(inode, secid) and ipc_getsecid(ipcp, secid)
LSM hooks. These hooks will be used instead of similar exported
SELinux interfaces.

Let {inode,ipc,task}_getsecid hooks set the secid to 0 by default
if CONFIG_SECURITY is not defined or if the hook is set to
NULL (dummy). This is done to notify the caller that no valid
secid exists.

Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com>
Acked-by: James Morris <jmorris@namei.org>
Reviewed-by: Paul Moore <paul.moore@hp.com>

12 years ago[NET]: Fix and allocate less memory for ->priv'less netdevices
Alexey Dobriyan [Fri, 18 Apr 2008 22:43:32 +0000]
[NET]: Fix and allocate less memory for ->priv'less netdevices

This patch effectively reverts commit d0498d9ae1a5cebac363e38907266d5cd2eedf89
aka "[NET]: Do not allocate unneeded memory for dev->priv alignment."
It was found to be buggy because of final unconditional += NETDEV_ALIGN_CONST
removal.

For example, for sizeof(struct net_device) being 2048 bytes, "alloc_size"
was also 2048 bytes, but allocator with debugging options turned on started
giving out !32-byte aligned memory resulting in redzones overwrites.

Patch does small optimization in ->priv'less case: bumping size to next
32-byte boundary was always done to ensure ->priv will also be aligned.
But, no ->priv, no need to do that.

Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years agox86 PAT: fix mmap() of holes
Ingo Molnar [Fri, 18 Apr 2008 19:32:22 +0000]
x86 PAT: fix mmap() of holes

do not return a -EINVAL when mmap()-ing PCI holes.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Acked-by: Suresh Siddha <suresh.b.siddha@intel.com>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>

12 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
Linus Torvalds [Fri, 18 Apr 2008 18:25:31 +0000]
Merge git://git./linux/kernel/git/jejb/scsi-misc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (137 commits)
  [SCSI] iscsi: bidi support for iscsi_tcp
  [SCSI] iscsi: bidi support at the generic libiscsi level
  [SCSI] iscsi: extended cdb support
  [SCSI] zfcp: Fix error handling for blocked unit for send FCP command
  [SCSI] zfcp: Remove zfcp_erp_wait from slave destory handler to fix deadlock
  [SCSI] zfcp: fix 31 bit compile warnings
  [SCSI] bsg: no need to set BSG_F_BLOCK bit in bsg_complete_all_commands
  [SCSI] bsg: remove minor in struct bsg_device
  [SCSI] bsg: use better helper list functions
  [SCSI] bsg: replace kobject_get with blk_get_queue
  [SCSI] bsg: takes a ref to struct device in fops->open
  [SCSI] qla1280: remove version check
  [SCSI] libsas: fix endianness bug in sas_ata
  [SCSI] zfcp: fix compiler warning caused by poking inside new semaphore (linux-next)
  [SCSI] aacraid: Do not describe check_reset parameter with its value
  [SCSI] aacraid: Fix down_interruptible() to check the return value
  [SCSI] sun3_scsi_vme: add MODULE_LICENSE
  [SCSI] st: rename flush_write_buffer()
  [SCSI] tgt: use KMEM_CACHE macro
  [SCSI] initio: fix big endian problems for auto request sense
  ...

12 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394...
Linus Torvalds [Fri, 18 Apr 2008 18:24:29 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/ieee1394/linux1394-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: (43 commits)
  firewire: cleanups
  firewire: fix synchronization of gap counts
  firewire: wait until PHY configuration packet was transmitted (fix bus reset loop)
  firewire: remove unused struct member
  firewire: use bitwise and to get reg in handle_registers
  firewire: replace more hex values with defined csr constants
  firewire: reread config ROM when device reset the bus
  firewire: replace static ROM cache by allocated cache
  firewire: fw-ohci: work around generation bug in TI controllers (fix AV/C and more)
  firewire: fw-ohci: extend logging of bus generations and node ID
  firewire: fw-ohci: conditionally log busReset interrupts
  firewire: fw-ohci: don't append to AT context when it's not active
  firewire: fw-ohci: log regAccessFail events
  firewire: fw-ohci: make sure HCControl register LPS bit is set
  firewire: fw-ohci: missing PPC PMac feature calls in failure path
  firewire: fw-ohci: untangle a mixed unsigned/signed expression
  firewire: debug interrupt events
  firewire: fw-ohci: catch self_id_count == 0
  firewire: fw-ohci: add self ID error check
  firewire: fw-ohci: refactor probe, remove, suspend, resume
  ...

12 years agolibata: fix boot panic with SATAPI devices on non-SFF HBAs
James Bottomley [Fri, 18 Apr 2008 18:18:48 +0000]
libata: fix boot panic with SATAPI devices on non-SFF HBAs

The kernel now panics reliably on boot if you have a SATAPI device
connected.

The problem was introduced by the libata merge trying to pull out all
the SFF code into a separate module.  Unfortunately, if you're a satapi
device you usually need to call atapi_request_sense, which has a bare
invocation of a SFF callback which is NULL on non-SFF HBAs.  Fix this by
making the call conditional.

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoMerge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfashe...
Linus Torvalds [Fri, 18 Apr 2008 17:15:22 +0000]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/mfasheh/ocfs2

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: (64 commits)
  ocfs2/net: Add debug interface to o2net
  ocfs2: Only build ocfs2/dlm with the o2cb stack module
  ocfs2/cluster: Get rid of arguments to the timeout routines
  ocfs2: Put tree in MAINTAINERS
  ocfs2: Use BUG_ON
  ocfs2: Convert ocfs2 over to unlocked_ioctl
  ocfs2: Improve rename locking
  fs/ocfs2/aops.c: test for IS_ERR rather than 0
  ocfs2: Add inode stealing for ocfs2_reserve_new_inode
  ocfs2: Add ac_alloc_slot in ocfs2_alloc_context
  ocfs2: Add a new parameter for ocfs2_reserve_suballoc_bits
  ocfs2: Enable cross extent block merge.
  ocfs2: Add support for cross extent block
  ocfs2: Move /sys/o2cb to /sys/fs/o2cb
  sysfs: Allow removal of symlinks in the sysfs root
  ocfs2:  Reconnect after idle time out.
  ocfs2/dlm: Cleanup lockres print
  ocfs2/dlm: Fix lockname in lockres print function
  ocfs2/dlm: Move dlm_print_one_mle() from dlmmaster.c to dlmdebug.c
  ocfs2/dlm: Dumps the purgelist into a debugfs file
  ...

12 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw
Linus Torvalds [Fri, 18 Apr 2008 17:02:46 +0000]
Merge git://git./linux/kernel/git/steve/gfs2-2.6-nmw

* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw: (49 commits)
  [GFS2] fix assertion in log_refund()
  [GFS2] fix GFP_KERNEL misuses
  [GFS2] test for IS_ERR rather than 0
  [GFS2] Invalidate cache at correct point
  [GFS2] fs/gfs2/recovery.c: suppress warnings
  [GFS2] Faster gfs2_bitfit algorithm
  [GFS2] Streamline quota lock/check for no-quota case
  [GFS2] Remove drop of module ref where not needed
  [GFS2] gfs2_adjust_quota has broken unstuffing code
  [GFS2] possible null pointer dereference fixup
  [GFS2] Need to ensure that sector_t is 64bits for GFS2
  [GFS2] re-support special inode
  [GFS2] remove gfs2_dev_iops
  [GFS2] fix file_system_type leak on gfs2meta mount
  [GFS2] Allow bmap to allocate extents
  [GFS2] Fix a page lock / glock deadlock
  [GFS2] proper extern for gfs2/locking/dlm/mount.c:gdlm_ops
  [GFS2] gfs2/ops_file.c should #include "ops_inode.h"
  [GFS2] be*_add_cpu conversion
  [GFS2] Fix bug where we called drop_bh incorrectly
  ...

12 years agox86: kgdb build fix
Harvey Harrison [Fri, 18 Apr 2008 16:54:38 +0000]
x86: kgdb build fix

TF_MASK is no longer defined, use X86_EFLAGS_TF.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years ago[SCSI] iscsi: bidi support for iscsi_tcp
Boaz Harrosh [Fri, 18 Apr 2008 15:11:53 +0000]
[SCSI] iscsi: bidi support for iscsi_tcp

access the right scsi_in() and/or scsi_out() side of things.
also for resid

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Reviewed-by: Pete Wyckoff <pw@osc.edu>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

12 years ago[SCSI] iscsi: bidi support at the generic libiscsi level
Boaz Harrosh [Fri, 18 Apr 2008 15:11:52 +0000]
[SCSI] iscsi: bidi support at the generic libiscsi level

- prepare the additional bidi_read rlength header.
- access the right scsi_in() and/or scsi_out() side of things.
  also for resid.
- Handle BIDI underflow overflow from target

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Reviewed-by: Pete Wyckoff <pw@osc.edu>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

12 years ago[SCSI] iscsi: extended cdb support
Boaz Harrosh [Fri, 18 Apr 2008 15:11:51 +0000]
[SCSI] iscsi: extended cdb support

Support for extended CDBs in iscsi.
All we need is to check if command spills over 16 bytes then allocate
an iscsi-extended-header for the leftovers.

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Reviewed-by: Pete Wyckoff <pw@osc.edu>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

12 years ago[SCSI] zfcp: Fix error handling for blocked unit for send FCP command
Christof Schmitt [Fri, 18 Apr 2008 10:51:57 +0000]
[SCSI] zfcp: Fix error handling for blocked unit for send FCP command

In the case the unit is blocked, zfcp_unit_get has not been called
yet, so the error handling path should not call zfcp_unit_put.

Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: Martin Peschke <mp3@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

12 years ago[SCSI] zfcp: Remove zfcp_erp_wait from slave destory handler to fix deadlock
Christof Schmitt [Fri, 18 Apr 2008 10:51:56 +0000]
[SCSI] zfcp: Remove zfcp_erp_wait from slave destory handler to fix deadlock

The testcase
# chchp -v 0 0.da && sleep 59 && chchp -v 1 0.da
results in this deadlock situation:

STACK TRACE FOR TASK: 0x7e9a2048 (zfcperp0.0.c613)
0 schedule+816 [0x356b3c]
1 schedule_timeout+172 [0x357340]
2 wait_for_common+192 [0x3565fc]
3 flush_cpu_workqueue+116 [0x52af0]
4 flush_workqueue+116 [0x533b8]
5 fc_remote_port_add+64 [0x1c83ec]
6 zfcp_erp_thread+4534 [0x26585a]
7 kernel_thread_starter+6 [0x195d2]

STACK TRACE FOR TASK: 0x7f8ec048 (fc_wq_0)
0 schedule+816 [0x356b3c]
1 zfcp_erp_wait+104 [0x264568]
2 zfcp_scsi_slave_destroy+64 [0x261b24]
3 __scsi_remove_device+154 [0x1c24ba]
4 scsi_remove_device+62 [0x1c2512]
5 __scsi_remove_target+198 [0x1c25ea]
6 __remove_child+58 [0x1c26d6]
7 device_for_each_child+66 [0x1ab566]
8 scsi_remove_target+98 [0x1c268a]
9 run_workqueue+200 [0x5272c]
10 worker_thread+146 [0x52882]
11 kthread+140 [0x58360]
12 kernel_thread_starter+6 [0x195d2]

Remove the zfcp_erp_wait call that is not required here to prevent the
deadlock situation.

Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: Martin Peschke <mp3@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

12 years ago[SCSI] zfcp: fix 31 bit compile warnings
Martin Peschke [Fri, 18 Apr 2008 10:51:55 +0000]
[SCSI] zfcp: fix 31 bit compile warnings

drivers/s390/scsi/zfcp_aux.c: In function ‘zfcp_fsf_incoming_els_rscn’:
drivers/s390/scsi/zfcp_aux.c:1379: warning: cast from pointer to integer of
different size
drivers/s390/scsi/zfcp_aux.c: In function ‘zfcp_fsf_incoming_els_plogi’:
drivers/s390/scsi/zfcp_aux.c:1432: warning: cast from pointer to integer of
different size
drivers/s390/scsi/zfcp_aux.c: In function ‘zfcp_fsf_incoming_els_logo’:
drivers/s390/scsi/zfcp_aux.c:1457: warning: cast from pointer to integer of
different size
..

Just passing pointers rids us of these warnings and improves readability.

Signed-off-by: Martin Peschke <mp3@de.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

12 years ago[SCSI] bsg: no need to set BSG_F_BLOCK bit in bsg_complete_all_commands
FUJITA Tomonori [Mon, 31 Mar 2008 01:03:42 +0000]
[SCSI] bsg: no need to set BSG_F_BLOCK bit in bsg_complete_all_commands

Before bsg_complete_all_commands is called, BSG_F_BLOCK bit is always
set.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

12 years ago[SCSI] bsg: remove minor in struct bsg_device
FUJITA Tomonori [Mon, 31 Mar 2008 01:03:41 +0000]
[SCSI] bsg: remove minor in struct bsg_device

minor in struct bsg_device is used as identifier to find the
corresponding struct bsg_device_class. However, request_queuse can be
used as identifier for that and the minor in struct bsg_device is
unnecessary.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

12 years ago[SCSI] bsg: use better helper list functions
FUJITA Tomonori [Mon, 31 Mar 2008 01:03:40 +0000]
[SCSI] bsg: use better helper list functions

This replace hlist_for_each and list_entry with hlist_for_each_entry
and list_first_entry respectively.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

12 years ago[SCSI] bsg: replace kobject_get with blk_get_queue
FUJITA Tomonori [Mon, 31 Mar 2008 01:03:39 +0000]
[SCSI] bsg: replace kobject_get with blk_get_queue

Both takes a ref to a queue. But blk_get_queue checks QUEUE_FLAG_DEAD
and is more appropriate interface here.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

12 years ago[SCSI] bsg: takes a ref to struct device in fops->open
FUJITA Tomonori [Mon, 31 Mar 2008 01:03:38 +0000]
[SCSI] bsg: takes a ref to struct device in fops->open

bsg_register_queue() takes a ref to struct device that a caller
passes. For example, bsg takes a ref to the sdev_gendev for scsi
devices. However, bsg doesn't inrease the refcount in fops->open. So
while an application opens a bsg device, the scsi device that the bsg
device holds can go away (bsg also takes a ref to a queue, but it
doesn't prevent the device from going away).

With this patch, bsg increases the refcount of struct device in
fops->open and decreases it in fops->release.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

12 years agoMerge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
Linus Torvalds [Fri, 18 Apr 2008 16:44:55 +0000]
Merge branch 'release' of git://git./linux/kernel/git/aegl/linux-2.6

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: (27 commits)
  [IA64] kdump: Add crash_save_vmcoreinfo for INIT
  [IA64] Fix NUMA configuration issue
  [IA64] Itanium Spec updates
  [IA64] Untangle sync_icache_dcache() page size determination
  [IA64] arch/ia64/kernel/: use time_* macros
  [IA64] remove redundant display of free swap space in show_mem()
  [IA64] make IOMMU respect the segment boundary limits
  [IA64] kprobes: kprobe-booster for ia64
  [IA64] fix getpid and set_tid_address fast system calls for pid namespaces
  [IA64] Replace explicit jiffies tests with time_* macros.
  [IA64] use goto to jump out do/while_each_thread
  [IA64] Fix unlock ordering in smp_callin
  [IA64] pgd_offset() constfication.
  [IA64] kdump: crash.c coding style fix
  [IA64] kdump: add kdump_on_fatal_mca
  [IA64] Minimize per_cpu reservations.
  [IA64] Correct pernodesize calculation.
  [IA64] Kernel parameter for max number of concurrent global TLB purges
  [IA64] Multiple outstanding ptc.g instruction support
  [IA64] Implement smp_call_function_mask for ia64
  ...

12 years agoocfs2/net: Add debug interface to o2net
Sunil Mushran [Mon, 14 Apr 2008 17:46:19 +0000]
ocfs2/net: Add debug interface to o2net

This patch exposes o2net information via debugfs. The information includes
the list of sockets (sock_containers) as well as the list of outstanding
messages (send_tracking). Useful for o2dlm debugging.

(This patch is derived from an earlier one written by Zach Brown that
exposed the same information via /proc.)

[Mark: checkpatch fixes]

Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Reviewed-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

12 years agoocfs2: Only build ocfs2/dlm with the o2cb stack module
Mark Fasheh [Fri, 4 Apr 2008 19:45:55 +0000]
ocfs2: Only build ocfs2/dlm with the o2cb stack module

fs/ocfs2/dlm/ocfs2_dlm.ko and fs/ocfs2/dlm/ocfs2_dlmfs.ko get built if
CONFIG_FS_OCFS2 is specified. This isn't quite how it should happen any more
- the "o2cb" dlm modules should only be built if CONFIG_FS_OCFS2_O2CB is
set, so update the dlm Makefile accordingly.

Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Joel Becker <joel.becker@oracle.com>

12 years agoocfs2/cluster: Get rid of arguments to the timeout routines
Jeff Mahoney [Fri, 28 Mar 2008 23:44:13 +0000]
ocfs2/cluster: Get rid of arguments to the timeout routines

We keep seeing bug reports related to NULL pointer derefs in
o2net_set_nn_state(). When I originally wrote up the configurable timeout
patch, I had tried to plan for multiple clusters. This was silly.

The timeout routines all use o2nm_single_cluster so there's no point in
passing an argument at all. This patch removes the arguments and kills those
bugs dead.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

12 years agoocfs2: Put tree in MAINTAINERS
Joel Becker [Sun, 23 Mar 2008 05:08:07 +0000]
ocfs2: Put tree in MAINTAINERS

The ocfs2 MAINTAINERS entry should have the git tree URL.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

12 years agoocfs2: Use BUG_ON
Julia Lawall [Tue, 4 Mar 2008 23:21:05 +0000]
ocfs2: Use BUG_ON

if (...) BUG(); should be replaced with BUG_ON(...) when the test has no
side-effects to allow a definition of BUG_ON that drops the code completely.

The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@ disable unlikely @ expression E,f; @@

(
  if (<... f(...) ...>) { BUG(); }
|
- if (unlikely(E)) { BUG(); }
+ BUG_ON(E);
)

@@ expression E,f; @@

(
  if (<... f(...) ...>) { BUG(); }
|
- if (E) { BUG(); }
+ BUG_ON(E);
)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

12 years agoocfs2: Convert ocfs2 over to unlocked_ioctl
Andi Kleen [Sun, 27 Jan 2008 02:17:17 +0000]
ocfs2: Convert ocfs2 over to unlocked_ioctl

As far as I can see there is nothing in ocfs2_ioctl that requires the BKL,
so use unlocked_ioctl

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

12 years agoocfs2: Improve rename locking
Jan Kara [Thu, 21 Feb 2008 17:00:00 +0000]
ocfs2: Improve rename locking

ocfs2_rename() was being too aggressive with the rename lock - we only need
it for certain forms of directory rename.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

12 years agofs/ocfs2/aops.c: test for IS_ERR rather than 0
Julia Lawall [Fri, 28 Mar 2008 21:43:10 +0000]
fs/ocfs2/aops.c: test for IS_ERR rather than 0

The function ocfs2_start_trans always returns either a valid pointer or a
value made with ERR_PTR, so its result should be tested with IS_ERR, not
with a test for 0.

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

12 years agoocfs2: Add inode stealing for ocfs2_reserve_new_inode
Tao Ma [Wed, 5 Mar 2008 08:11:46 +0000]
ocfs2: Add inode stealing for ocfs2_reserve_new_inode

Inode allocation is modified to look in other nodes allocators during
extreme out of space situations. We retry our own slot when space is freed
back to the global bitmap, or whenever we've allocated more than 1024 inodes
from another slot.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

12 years agoocfs2: Add ac_alloc_slot in ocfs2_alloc_context
Tao Ma [Mon, 3 Mar 2008 09:12:30 +0000]
ocfs2: Add ac_alloc_slot in ocfs2_alloc_context

In inode stealing, we no longer restrict the allocation to
happen in the local node. So it is neccessary for us to add
a new member in ocfs2_alloc_context to indicate which slot
we are using for allocation. We also modify the process of
local alloc so that this member can be used there also.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

12 years agoocfs2: Add a new parameter for ocfs2_reserve_suballoc_bits
Tao Ma [Mon, 3 Mar 2008 09:12:09 +0000]
ocfs2: Add a new parameter for ocfs2_reserve_suballoc_bits

In some cases(Inode stealing from other nodes), we may not want
ocfs2_reserve_suballoc_bits to allocate new groups from the
global_bitmap since it may already be full. So add a new parameter
for this.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

12 years agoocfs2: Enable cross extent block merge.
Tao Ma [Wed, 30 Jan 2008 06:21:32 +0000]
ocfs2: Enable cross extent block merge.

In ocfs2_figure_merge_contig_type, we judge whether there exists
a cross extent block merge and enable it by setting CONTIG_LEFT
and CONTIG_RIGHT accordingly.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

12 years agoocfs2: Add support for cross extent block
Tao Ma [Wed, 30 Jan 2008 06:21:05 +0000]
ocfs2: Add support for cross extent block

In ocfs2_merge_rec_left, when we find the merge extent is "CONTIG_RIGHT"
with the first extent record of the next extent block, we will merge it to
the next extent block and change all the related extent blocks accordingly.

In ocfs2_merge_rec_right, when we find the merge extent is "CONTIG_LEFT"
with the last extent record of the previous extent block, we will merge
it to the prevoius extent block and change all the related extent blocks
accordingly.

As for CONTIG_LEFTRIGHT, we will handle CONTIG_RIGHT first so that when
the index is zero, the merge process will be more efficient and easier.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

12 years agoocfs2: Move /sys/o2cb to /sys/fs/o2cb
Mark Fasheh [Wed, 30 Jan 2008 01:08:26 +0000]
ocfs2: Move /sys/o2cb to /sys/fs/o2cb

/sys/fs is where we really want file system specific sysfs objects.

Ocfs2-tools has been updated to look in /sys/fs/o2cb. We can maintain
backwards compatibility with old ocfs2-tools by using a sysfs symlink. After
some time (2 years), the symlink can be safely removed. This patch also adds
documentation to make it easier for people to figure out what /sys/fs/o2cb
is used for.

Signed-off-by: Mark Fasheh <mfasheh@suse.com>

12 years agosysfs: Allow removal of symlinks in the sysfs root
Mark Fasheh [Tue, 29 Jan 2008 22:35:18 +0000]
sysfs: Allow removal of symlinks in the sysfs root

Allow callers of sysfs_remove_link() to pass a NULL kobj, in which case
sysfs_root will be used as the parent directory. This allows us to tear down
top level symlinks created via sysfs_create_link(), which already has
similar handling of a NULL parent object.

Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years agoocfs2: Reconnect after idle time out.
Tao Ma [Wed, 5 Mar 2008 07:50:12 +0000]
ocfs2:  Reconnect after idle time out.

Currently, o2net connects to a node on hb_up and disconnects on
hb_down and net timeout.

It disconnects on net timeout is ok, but it should attempt to
reconnect back. This is because sometimes nodes get overloaded
enough that the network connection breaks but the disk hb does not.
And if we get into that situation, we either fence (unnecessarily)
or wait for its disk hb to die (and sometimes hang in the process).

So in this updated scheme, when the network disconnects, we keep
attempting to reconnect till we succeed or we get a disk hb down
event.

If the other node is really dead, then we will eventually get a
node down event. If not, we should be able to connect again and
continue.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

12 years agoocfs2/dlm: Cleanup lockres print
Sunil Mushran [Fri, 14 Mar 2008 18:18:24 +0000]
ocfs2/dlm: Cleanup lockres print

A previous patch added KERN_NOTICE to printks printing the lockres that
cluttered the output. This patch removes the log level. For people concerned
with syslog clutter, please note we now use this facility to print lockres
only during an error.

Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

12 years agoocfs2/dlm: Fix lockname in lockres print function
Sunil Mushran [Mon, 10 Mar 2008 22:16:29 +0000]
ocfs2/dlm: Fix lockname in lockres print function

__dlm_print_one_lock_resource was printing lockname incorrectly.
Also, we now use printk directly instead of mlog as the latter prints
the line context which is not useful for this print.

Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

12 years agoocfs2/dlm: Move dlm_print_one_mle() from dlmmaster.c to dlmdebug.c
Sunil Mushran [Mon, 10 Mar 2008 22:16:28 +0000]
ocfs2/dlm: Move dlm_print_one_mle() from dlmc to dlmdebug.c

This patch helps in consolidating debugging related functions in dlmdebug.c.

Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

12 years agoocfs2/dlm: Dumps the purgelist into a debugfs file
Sunil Mushran [Mon, 10 Mar 2008 22:16:27 +0000]
ocfs2/dlm: Dumps the purgelist into a debugfs file

This patch dumps all the lockres' on the purgelist it can fit in one page
into a debugfs file. Useful for debugging.

Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

12 years agoocfs2/dlm: Dumps the mles into a debugfs file
Sunil Mushran [Mon, 10 Mar 2008 22:16:26 +0000]
ocfs2/dlm: Dumps the mles into a debugfs file

This patch dumps all mles it can fit in one page into a debugfs file.
Useful for debugging.

Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

12 years agoocfs2/dlm: Move struct dlm_master_list_entry to dlmcommon.h
Sunil Mushran [Mon, 10 Mar 2008 22:16:25 +0000]
ocfs2/dlm: Move struct dlm_master_list_entry to dlmcommon.h

This patch moves some mle related definitions from dlmmaster.c
to dlmcommon.h. Future patches need these definitions to dump mle
debugging information.

Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.beckeroracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

12 years agoocfs2/dlm: Dumps the lockres' into a debugfs file
Sunil Mushran [Mon, 10 Mar 2008 22:16:24 +0000]
ocfs2/dlm: Dumps the lockres' into a debugfs file

This patch dumps all the lockres' alongwith all the locks into
a debugfs file. Useful for debugging.

Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

12 years agoocfs2/dlm: Dump the dlm state in a debugfs file
Sunil Mushran [Mon, 10 Mar 2008 22:16:23 +0000]
ocfs2/dlm: Dump the dlm state in a debugfs file

This patch dumps the dlm state (dlm_ctxt) into a debugfs file.
Useful for debugging.

Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

12 years agoocfs2/dlm: Create debugfs dirs
Sunil Mushran [Mon, 10 Mar 2008 22:16:22 +0000]
ocfs2/dlm: Create debugfs dirs

This patch creates the debugfs directories that will hold the
files to be used to dump the dlm state.

Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

12 years agoocfs2/dlm: Link all lockres' to a tracking list
Sunil Mushran [Mon, 10 Mar 2008 22:16:21 +0000]
ocfs2/dlm: Link all lockres' to a tracking list

This patch links all the lockres' to a tracking list in dlm_ctxt.
We will use this in an upcoming patch that will walk the entire
list and to dump the lockres states to a debugfs file.

Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

12 years agoocfs2/dlm: Create slabcaches for lock and lockres
Sunil Mushran [Mon, 10 Mar 2008 22:16:20 +0000]
ocfs2/dlm: Create slabcaches for lock and lockres

This patch makes the o2dlm allocate memory for lockres, lockname and lock
structures from slabcaches rather than kmalloc. This allows us to not only
make these allocs more efficient but also allows us to track the memory being
consumed by these structures.

Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

12 years agoocfs2/dlm: Rename slabcache dlm_mle_cache to o2dlm_mle
Sunil Mushran [Mon, 10 Mar 2008 22:16:19 +0000]
ocfs2/dlm: Rename slabcache dlm_mle_cache to o2dlm_mle

This patch renames dlm_mle_slabcache to prevent namespace clashes with fs/dlm.

Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

12 years agoocfs2: Document /sys/fs/ocfs2
Joel Becker [Mon, 31 Mar 2008 23:22:55 +0000]
ocfs2: Document /sys/fs/ocfs2

Add ABI documentation for these files:

/sys/fs/ocfs2/max_locking_protocol
/sys/fs/ocfs2/loaded_cluster_plugins
/sys/fs/ocfs2/active_cluster_plugin
/sys/fs/ocfs2/cluster_stack

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

12 years agoocfs2: Allow selection of cluster plug-ins.
Joel Becker [Wed, 5 Mar 2008 01:58:56 +0000]
ocfs2: Allow selection of cluster plug-ins.

ocfs2 now supports plug-ins for the classic O2CB stack as well as
userspace cluster stacks in conjunction with fs/dlm.  This allows zero,
one, or both of the plug-ins to be selected in Kconfig.  For local mounts
(non-clustered), neither plug-in is needed.  Both plugins can be loaded
at one time, the runtime will select the one needed for the cluster
systme in use.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

12 years agoocfs2: Add kbuild for ocfs2_stack_user.ko
Joel Becker [Wed, 28 Nov 2007 22:53:30 +0000]
ocfs2: Add kbuild for ocfs2_stack_user.ko

Add ocfs2_stack_user.ko to the Makefile so that it builds.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

12 years agoocfs2: Change mlog_bug_on to BUG_ON in ocfs2_lockid.h
Joel Becker [Wed, 5 Mar 2008 00:09:39 +0000]
ocfs2: Change mlog_bug_on to BUG_ON in ocfs2_lockid.h

The masklog code is in the o2cb stack, but ocfs2_lockid.h now needs to
be included by the user stack.  The BUG() in ocfs2_lock_type_string()
does not need masklog support, so change it to a regular BUG_ON().

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

12 years agoocfs2: add fsdlm to stackglue
David Teigland [Wed, 20 Feb 2008 22:29:27 +0000]
ocfs2: add fsdlm to stackglue

Add code to use fs/dlm.

[ Modified to be part of the stack_user module -- Joel ]

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

12 years agoocfs2: Add the 'set version' message to the ocfs2_control device.
Joel Becker [Wed, 20 Feb 2008 23:39:44 +0000]
ocfs2: Add the 'set version' message to the ocfs2_control device.

The "SETV" message sets the filesystem locking protocol version as
negotiated by the client.  The client negotiates based on the maximum
version advertised in /sys/fs/ocfs2/max_locking_protocol.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

12 years agoocfs2: Add the local node id to the handshake.
Joel Becker [Wed, 20 Feb 2008 22:44:34 +0000]
ocfs2: Add the local node id to the handshake.

This is the second part of the ocfs2_control handshake.  After
negotiating the ocfs2_control protocol, the daemon tells the filesystem
what the local node id is via the SETN message.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

12 years agoocfs2: Introduce the DOWN message to ocfs2_control
Joel Becker [Tue, 19 Feb 2008 01:07:09 +0000]
ocfs2: Introduce the DOWN message to ocfs2_control

When the control daemon sees a node go down, it sends a DOWN message
through the ocfs2_control device.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

12 years agoocfs2: Start the ocfs2_control handshake.
Joel Becker [Tue, 19 Feb 2008 03:40:12 +0000]
ocfs2: Start the ocfs2_control handshake.

When a control daemon opens the ocfs2_control device, it must perform a
handshake to tell the filesystem it is something capable of monitoring
cluster status.  Only after the handshake is complete will the filesystem
allow mounts.

This is the first part of the handshake.  The daemon reads all supported
ocfs2_control protocols, then writes in the protocol it will use.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

12 years agoocfs2: Add the ocfs2_control misc device.
Joel Becker [Tue, 19 Feb 2008 03:23:28 +0000]
ocfs2: Add the ocfs2_control misc device.

The ocfs2_control misc device is how a userspace control daemon (controld)
talks to the filesystem.  Introduce the bare-bones filesystem ops.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

12 years agoocfs2: Add the user stack module.
Joel Becker [Wed, 28 Nov 2007 22:38:40 +0000]
ocfs2: Add the user stack module.

Add a skeleton for the stack_user module.  It's just the barebones module
code.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>