14 years ago[PATCH] SharpSL: Abstract model specifics from Corgi Backlight driver
Richard Purdie [Tue, 13 Sep 2005 08:25:33 +0000]
[PATCH] SharpSL: Abstract model specifics from Corgi Backlight driver

Separate out the Sharp Zaurus c7x0 series specific code from the Corgi
backlight driver.  Abstract model/machine specific functions to corgi_lcd.c
via sharpsl.h

This enables the driver to be used by the Zaurus cxx00 series.

Signed-Off-by: Richard Purdie <rpurdie@rpsys.net>
Cc: Vojtech Pavlik <vojtech@suse.cz>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] SharpSL: Abstract c7x0 specifics from Corgi Touchscreen driver
Richard Purdie [Tue, 13 Sep 2005 08:25:33 +0000]
[PATCH] SharpSL: Abstract c7x0 specifics from Corgi Touchscreen driver

Separate out the Sharp Zaurus c7x0 series specific code from the Corgi
Touchscreen driver.  Use the new functions in corgi_lcd.c via sharpsl.h for
hsync handling and pass the IRQ as a platform device resource.  Move a
function prototype into the w100fb header file where it belongs.

This enables the driver to be used by the Zaurus cxx00 series.

Signed-Off-by: Richard Purdie <rpurdie@rpsys.net>
Cc: Vojtech Pavlik <vojtech@suse.cz>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] SharpSL: Add cxx00 support to the Corgi LCD driver
Richard Purdie [Tue, 13 Sep 2005 08:25:32 +0000]
[PATCH] SharpSL: Add cxx00 support to the Corgi LCD driver

The same LCD is present on both the Sharp Zaurus c7x0 series and the cxx00 but
with different framebuffer drivers (w100fb vs.  pxafb).  This patch adds
support for the cxx00 series to the LCD driver.  It also adds some LCD to
touchscreen interface logic needed by the touchscreen driver to prevent
interference problems, the idea being to keep all the ugly code in one place
leaving the drivers themselves clean.  sharpsl.h is used to provide the
abstraction.

Signed-Off-by: Richard Purdie <rpurdie@rpsys.net>
Cc: Vojtech Pavlik <vojtech@suse.cz>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] SharpSL: Abstract c7x0 specifics from Corgi SSP
Richard Purdie [Tue, 13 Sep 2005 08:25:30 +0000]
[PATCH] SharpSL: Abstract c7x0 specifics from Corgi SSP

Sharp's newer range of Zaurus clamshell handhelds, the cxx00's are similar to
the c7x0 series yet different.  This patch series abstracts the differences
and generates a set of common drivers that support both series of devices.  It
then adds machine support for Spitz (SL-C3000) and Borzoi (SL-C3100).  Hooks
for Akita (SL-C1000) differences are also added.  The I2C driver for its IO
expander is the only missing piece.

This patch:

Separate out the Sharp Zaurus c7x0 series specific code from corgi_ssp.c so
that other models such as the cxx00's can share it.  Create sharpsl.h which
will be used to abstract machine/model specifics.

This enables the driver to be used by the Zaurus cxx00 series.

Signed-Off-by: Richard Purdie <rpurdie@rpsys.net>
Cc: Vojtech Pavlik <vojtech@suse.cz>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] pktcdvd: BUG_ON cleanups
Peter Osterlund [Tue, 13 Sep 2005 08:25:29 +0000]
[PATCH] pktcdvd: BUG_ON cleanups

Remove some redundant BUG_ON() statements in pktcdvd and move one run-time
check to compile-time.

Signed-off-by: Peter Osterlund <petero2@telia.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] pktcdvd: use kcalloc and kzalloc
Peter Osterlund [Tue, 13 Sep 2005 08:25:29 +0000]
[PATCH] pktcdvd: use kcalloc and kzalloc

Use kcalloc and kzalloc in pktcdvd.

Signed-off-by: Peter Osterlund <petero2@telia.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] pktcdvd: more accurate I/O accounting
Peter Osterlund [Tue, 13 Sep 2005 08:25:28 +0000]
[PATCH] pktcdvd: more accurate I/O accounting

In the /proc statistics, only count writes that upper layers have requested.
Don't count additional writes created inside the packet driver to satisfy the
requirement to only write full packets.

Signed-off-by: Peter Osterlund <petero2@telia.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] pktcdvd: documentation update
Peter Osterlund [Tue, 13 Sep 2005 08:25:27 +0000]
[PATCH] pktcdvd: documentation update

Update the "theory of operation" description.

Signed-off-by: Peter Osterlund <petero2@telia.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] pktcdvd: fix bogus BUG_ON
Peter Osterlund [Tue, 13 Sep 2005 08:25:27 +0000]
[PATCH] pktcdvd: fix bogus BUG_ON

In the packet writing driver, if the drive reports a packet size larger than
the driver can handle, bail out safely instead of triggering a BUG_ON.

Signed-off-by: Peter Osterlund <petero2@telia.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] cciss: SCSI tape info for /proc
Mike Miller [Tue, 13 Sep 2005 08:25:26 +0000]
[PATCH] cciss: SCSI tape info for /proc

Add SCSI host and device info not elsewhere available to /proc/scsi/cciss/*
Namely, connect cciss device instance with scsi host number, and give scsi
host number, bus, target, lun, devicetype, and 8-byte cciss LUNID for each
tapedrive/medium changer attached to a controller

For instance:

# cat /proc/scsi/cciss/2
cciss0: SCSI host: 2
c2b0t0l0 01 0x0000000000000001

Signed-off-by: Stephen M. Cameron <steve.cameron@hp.com>
Signed-off-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] cciss: One Button Disaster Recovery support
Mike Miller [Tue, 13 Sep 2005 08:25:25 +0000]
[PATCH] cciss: One Button Disaster Recovery support

This patch adds support for "One Button Disaster Recovery" devices to the
cciss driver.  (OBDR devices are tape drives which can pretend to be cd-rom
devices temporarily.  Once booted the device can be reverted to a tape drive
and data recovery operations can be automatically begun.)

This is an enhancement request by a vendor/partner working on One Button
Disaster Recovery.

Signed-off-by: Stephen M. Cameron <steve.cameron@hp.com>
Signed-off-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] cciss: fix for DMA brokeness
Mike Miller [Tue, 13 Sep 2005 08:25:24 +0000]
[PATCH] cciss: fix for DMA brokeness

The CCISS driver seems to loose track of DMA mappings created by it's
fill_cmd() routine.  Neither callers of this routine are extracting the DMA
address created in order to do the unmap.

Instead, they simply try to unmap 0x0.  It's easy to see this problem on an
x86_64 system when using the "swiotlb=force" boot option.  In this case, the
driver is leaking resources of the swiotlb and not causing a sync of the
bounce buffer.

Signed-off-by: Alex Williamson <alex.williamson@hp.com>
Signed-off-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] cciss: bug fix in cciss_remove_one
Mike Miller [Tue, 13 Sep 2005 08:25:23 +0000]
[PATCH] cciss: bug fix in cciss_remove_one

This patch fixes a bug in cciss_remove_one.  A set of braces was missing for
the if statement causing an Oops on driver unload.

Signed-off-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] cciss: direct lookup for command completions
Mike Miller [Tue, 13 Sep 2005 08:25:22 +0000]
[PATCH] cciss: direct lookup for command completions

This patch changes the way we complete commands.  In the old method when we
got a completion we searched our command list from the top until we find it.

This method uses a tag associated with each command (not SCSI command tagging)
to index us directly to the completed command.  This helps performance.

Signed-off-by: Don Brace <dab@hp.com>
Signed-off-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] cciss: new disk register/deregister routines
Mike Miller [Tue, 13 Sep 2005 08:25:22 +0000]
[PATCH] cciss: new disk register/deregister routines

This patch removes a couple of functions dealing with configuration and
replaces them with new functions.  This implementation fixes some bugs
associated with the ACUXE.  It also allows a logical volume to be removed from
the middle without deleting all volumes behind it.

If a user has 5 logical volumes and decides he wants to reconfigure volume
number 3, he can now do that without removing volumes 4 & 5 first.  This code
has been tested in our labs against all application software.

Signed-off-by: Chase Maupin <chase.maupin@hp.com>
Signed-off-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] cciss: busy_initializing flag
Mike Miller [Tue, 13 Sep 2005 08:25:21 +0000]
[PATCH] cciss: busy_initializing flag

This patch adds a flag called busy_initializing.  If there are multiple
controllers in a server AND the HP agents are running it's possible the agents
may try to poll a card that is still initializing if the driver is removed and
then added again.

Signed-off-by: Don Brace <dab@hp.com>
Signed-off-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] cciss: new controller pci/subsystem ids
Mike Miller [Tue, 13 Sep 2005 08:25:19 +0000]
[PATCH] cciss: new controller pci/subsystem ids

This patch adds new PCI and subsystem ID's that finally made the spec.  It
also include a name change for one controller.  I know there's a lot of
duplicat names but the fw folks wanted this for the different implementations.

Even though the same ASIC is used it may be embedded on some platforms,
standup card in others, and a mezzanine in other servers.

Signed-off-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] dontdiff: add asm_offsets
Michal Piotrowski [Tue, 13 Sep 2005 08:25:18 +0000]
[PATCH] dontdiff: add asm_offsets

We seem to use both asm-offsets.* and asm_offsets.*

Signed-off-by: Michal K. K. Piotrowski <michal.k.k.piotrowski@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] reiserfs: use mark_inode_dirty instead of reiserfs_update_sd
Chris Mason [Tue, 13 Sep 2005 08:25:17 +0000]
[PATCH] reiserfs: use mark_inode_dirty instead of reiserfs_update_sd

reiserfs should use mark_inode_dirty during reiserfs_file_write and
reiserfs_commit_write.  This makes sure the inode is properly flagged as
dirty, which is used during O_SYNC to decide when to trigger log commits.

This patch also removes the O_SYNC check from reiserfs_commit_write, since
that gets dealt with properly at higher layers once we start using
mark_inode_dirty.

Thanks to Hifumi Hisashi <hifumi.hisashi@lab.ntt.co.jp> for catching this.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] use add_taint() for setting tainted bit flags
Randy Dunlap [Tue, 13 Sep 2005 08:25:16 +0000]
[PATCH] use add_taint() for setting tainted bit flags

Use the add_taint() interface for setting tainted bit flags instead of
doing it manually.

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] Remove unnecessary check_region references in comments
Peter Osterlund [Tue, 13 Sep 2005 08:25:15 +0000]
[PATCH] Remove unnecessary check_region references in comments

Remove check_region references from comments and printk statements so that
searching for real users of this deprecated function gets easier.

Signed-off-by: Peter Osterlund <petero2@telia.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] schedule_timeout_[un]interruptible() speedup
Andrew Morton [Tue, 13 Sep 2005 08:25:15 +0000]
[PATCH] schedule_timeout_[un]interruptible() speedup

These functions don't need schedule_timeout()'s barrier.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] set_current_state() commentary
Andrew Morton [Tue, 13 Sep 2005 08:25:14 +0000]
[PATCH] set_current_state() commentary

Explain the mysteries of set_current_state().

Quoth Linus:

 The scheduler itself never needs the memory barrier at all.

 The barrier is needed only if the user itself ends up testing some other
 thing afterwards, ie if you have

  set_process_state(TASK_INTERRUPTIBLE);
  if (still_need_to_sleep())
  schedule();

 then the "still_need_to_sleep()" thing may test flags and wakeup events,
 and then you _may_ want to (and often do) make sure that the write of
 TASK_INTERRUPTIBLE is serialized wrt the reads of any wakeup data (since
 the wakeup may have happened on another CPU).

 So the comment is somewhat wrong. We don't really _care_ whether the state
 propagates out to other CPU's since all of our actions are purely local,
 and there is nothing we do that is conditional on any other CPU: we're
 going to sleep unconditionally, and the scheduler only cares about _our_
 state, not about somebody elses state.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] Make BUILD_BUG_ON fail at compile time.
Andi Kleen [Tue, 13 Sep 2005 08:25:13 +0000]
[PATCH] Make BUILD_BUG_ON fail at compile time.

Force a compiler error instead of a link error, because they are easier to
track down.  Idea stolen from code by Jan Beulich <jbeulich@novell.com>

If the argument to BUILD_BUG_ON evaluates to non-zero the compiler will do:

t.c:6: error: size of array `type name' is negative

(surprised that gcc doesn't have an extension for this)

Signed-off-by: "Andi Kleen" <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] free initrd mem adjustment
Jan Beulich [Tue, 13 Sep 2005 08:25:12 +0000]
[PATCH] free initrd mem adjustment

Besides freeing initrd memory, also clear out the now dangling pointers to
it, to make sure accidental late use attempts can be detected.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] open returns ENFILE but creates file anyway
Peter Staubach [Tue, 13 Sep 2005 08:25:12 +0000]
[PATCH] open returns ENFILE but creates file anyway

When open(O_CREAT) is called and the error, ENFILE, is returned, the file
may be created anyway.  This is counter intuitive, against the SUS V3
specification, and may cause applications to misbehave if they are not
coded correctly to handle this semantic.  The SUS V3 specification
explicitly states "No files shall be created or modified if the function
returns -1.".

The error, ENFILE, is used to indicate the system wide open file table is
full and no more file structs can be allocated.

This is due to an ordering problem.  The entry in the directory is created
before the file struct is allocated.  If the allocation for the file struct
fails, then the system call must return an error, but the directory entry
was already created and can not be safely removed.

The solution to this situation is relatively easy.  The file struct should
be allocated before the directory entry is created.  If the allocation
fails, then the error can be returned directly.  If the creation of the
directory entry fails, then the file struct can be easily freed.

Signed-off-by: Peter Staubach <staubach@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] ppc32: remove use of asm/segment.h
Kumar Gala [Tue, 13 Sep 2005 08:25:10 +0000]
[PATCH] ppc32: remove use of asm/segment.h

Removed ppc32 architecture specific users of asm/segment.h and
asm-ppc/segment.h itself

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] ppc32: discard *.exit.text and *.exit.data sections
Tom Rini [Tue, 13 Sep 2005 08:25:09 +0000]
[PATCH] ppc32: discard *.exit.text and *.exit.data sections

Discard *.exit.text sections on runtime.  We cannot do this on link time
because of the way BUG macros are implemented.  If "__exit function" calls
one of those macros, __bug_table section will reference this function.
This is similar to ".altinstructions" situation on i386.

*.exit.data seems to be OK in this respect and is discarded on link
time.

Signed-off-by: Eugene Surovegin <ebs@ebshome.net>
Signed-off-by: Tom Rini <trini@kernel.crashing.org>
Acked-by: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] Fix MPOL_F_VERIFY
Andi Kleen [Tue, 13 Sep 2005 08:25:08 +0000]
[PATCH] Fix MPOL_F_VERIFY

There was a pretty bad bug in there that the code would always check the full
VMA, not the range the user requested.

When the VMA to be checked was merged with the previous VMA this could lead to
spurious failures.

Signed-off-by: "Andi Kleen" <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] vm: kswapd cleanup: use pgdat
Con Kolivas [Tue, 13 Sep 2005 08:25:07 +0000]
[PATCH] vm: kswapd cleanup: use pgdat

Use the pgdat pointer we've already defined in wakeup_kswapd

Signed-off-by: Con Kolivas <kernel@kolivas.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] i2c-keywest warning fix
Andrew Morton [Tue, 13 Sep 2005 08:25:07 +0000]
[PATCH] i2c-keywest warning fix

Unused variable.

Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] pcmcia: add another orinoco_cs id
Komuro [Tue, 13 Sep 2005 08:25:05 +0000]
[PATCH] pcmcia: add another orinoco_cs id

Add new id to orinoco_cs (corega PCCB-11).

Signed-off-by: <komurojun-mbn@nifty.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] ide: clean up the garbage in eighty_ninty_three
Alan Cox [Tue, 13 Sep 2005 08:25:04 +0000]
[PATCH] ide: clean up the garbage in eighty_ninty_three

Replace the foot long pile of festering garbage in eighty_ninty_three with
some actual clean code.  All the ifdefs are fixed and havent changed since
2.4

Acked-by: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] pcmcia: warn on IOCTL usage
Dominik Brodowski [Tue, 13 Sep 2005 08:25:03 +0000]
[PATCH] pcmcia: warn on IOCTL usage

More visible user information of scheduled feature removal.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] fbdev Kconfig fix
Antonino A. Daplas [Tue, 13 Sep 2005 08:25:02 +0000]
[PATCH] fbdev Kconfig fix

Fix compile error if CONFIG_FB_I810_I2C is 'y' and CONFIG_I2C = 'm'.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] drivers/base/*: use kzalloc instead of kmalloc+memset
Jiri Slaby [Tue, 13 Sep 2005 08:25:01 +0000]
[PATCH] drivers/base/*: use kzalloc instead of kmalloc+memset

Fixes a bunch of memset bugs too.

Signed-off-by: Lion Vollnhals <webmaster@schiggl.de>
Signed-off-by: Jiri Slaby <xslaby@fi.muni.cz>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years agoFix up more strange byte writes to the PCI_ROM_ADDRESS config word
Linus Torvalds [Tue, 13 Sep 2005 14:59:34 +0000]
Fix up more strange byte writes to the PCI_ROM_ADDRESS config word

It's a dword thing, and the value we write is a dword.  Doing a byte
write to it is nonsensical, and writes only the low byte, which only
contains the enable bit.  So we enable a nonsensical address (usually
zero), which causes the controller no end of problems.

Trivial fix, but nasty to find.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years agoLinux 2.6.14-rc1
Linus Torvalds [Tue, 13 Sep 2005 03:12:09 +0000]
Linux 2.6.14-rc1

Two weeks after 2.6.13: starting to calm things down.

14 years ago[PATCH] m68knommu: optimized local_irq_disable, and platform reboot code
Greg Ungerer [Tue, 13 Sep 2005 01:14:08 +0000]
[PATCH] m68knommu: optimized local_irq_disable, and platform reboot code

Switch to a space optimized version of local_irq_disable() for ColdFire
platforms. Also add reboot support for the Freescale M5272 platform.
Patch originally submitted by Philippe De Muyter <phdm@macqel.be>.

Add reboot support for the Freescale M523x ColdFire platform. Patch originally
submitted by Jate Sujjavanich.

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] m68knommu: startup code for the Drangen Engine 68328 based board
Greg Ungerer [Tue, 13 Sep 2005 01:14:08 +0000]
[PATCH] m68knommu: startup code for the Drangen Engine 68328 based board

Specialized startup code for the 68328 based DragenEngine board.
It doesn't easily fit into the common 68x328 startup code framework.
It doesn't want any of the common hardware setup to be done here.

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] m68knommu: implement scatter/gather support macros
Greg Ungerer [Tue, 13 Sep 2005 01:14:08 +0000]
[PATCH] m68knommu: implement scatter/gather support macros

Implement the scattergather support macros for m68knommu targets.
Patch originally submitted by Leon Woestenberg <leonw@mailcan.com>.

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] m68knommu: fix cache actions for ColdFire 5249, 527x and 528x processors
Greg Ungerer [Tue, 13 Sep 2005 01:14:08 +0000]
[PATCH] m68knommu: fix cache actions for ColdFire 5249, 527x and 528x processors

Add better support for flushing the cache's on some ColdFire processors.
The 5249 cache code is now enabled (it was stubbed out), it really is
needed. Add support for the 527x and 528x families - we only use the
simple instruction cache on them.

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-for-linus-2.6
Linus Torvalds [Tue, 13 Sep 2005 03:02:18 +0000]
Merge /linux/kernel/git/jejb/scsi-for-linus-2.6

14 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6
Linus Torvalds [Mon, 12 Sep 2005 22:55:33 +0000]
Merge /pub/scm/linux/kernel/git/davem/sparc-2.6

14 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Mon, 12 Sep 2005 22:55:09 +0000]
Merge /pub/scm/linux/kernel/git/davem/net-2.6

14 years agoMerge master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Mon, 12 Sep 2005 22:54:41 +0000]
Merge master.kernel.org:/home/rmk/linux-2.6-arm

14 years agoMerge master.kernel.org:/home/rmk/linux-2.6-mmc
Linus Torvalds [Mon, 12 Sep 2005 22:54:23 +0000]
Merge master.kernel.org:/home/rmk/linux-2.6-mmc

14 years ago[ARM SMP] Add MPCore watchdog driver
Russell King [Mon, 12 Sep 2005 21:56:56 +0000]
[ARM SMP] Add MPCore watchdog driver

Add platform independent parts of the ARM MPCore watchdog driver.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

14 years ago[BNX2]: Add support for ETHTOOL_GPERMADDR.
John W. Linville [Mon, 12 Sep 2005 21:45:08 +0000]
[BNX2]: Add support for ETHTOOL_GPERMADDR.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

14 years ago[TG3]: Add support for ETHTOOL_GPERMADDR.
John W. Linville [Mon, 12 Sep 2005 21:44:20 +0000]
[TG3]: Add support for ETHTOOL_GPERMADDR.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

14 years ago[TG3]: Do not count non-error frames dropped by the hardware as rx_errors.
John W. Linville [Mon, 12 Sep 2005 21:43:18 +0000]
[TG3]: Do not count non-error frames dropped by the hardware as rx_errors.

Instead, count them as part of rx_missed_errors.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

14 years ago[NETROM]: Introduct stuct nr_private
Ralf Baechle [Mon, 12 Sep 2005 21:28:03 +0000]
[NETROM]: Introduct stuct nr_private

NET/ROM's virtual interfaces don't have a proper private data
structure yet.  Create struct nr_private and put the statistics there.

Signed-off-by: Ralf Baechle DL5RB <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

14 years ago[NETROM]: Implement G8PZT Circuit reset for NET/ROM
Ralf Baechle [Mon, 12 Sep 2005 21:27:37 +0000]
[NETROM]: Implement G8PZT Circuit reset for NET/ROM

NET/ROM is lacking a connection reset like TCP's RST flag which at times
may result in a connecting having to slowly timing out instead of just being
reset.  An earlier attempt to reset the connection by sending a
NR_CONNACK | NR_CHOKE_FLAG transport was inacceptable as it did result in
crashes of BPQ systems.  An alternative approach of introducing a new
transport type 7 (NR_RESET) has be implemented several years ago in
Paula Jayne Dowie G8PZT's Xrouter.

Implement NR_RESET for Linux's NET/ROM but like any messing with the state
engine consider this experimental for now and thus control it by a sysctl
(net.netrom.reset) which for the time being defaults to off.

Signed-off-by: Ralf Baechle DL5RB <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

14 years ago[ROSE]: ROSE has no ARP
Ralf Baechle [Mon, 12 Sep 2005 21:26:52 +0000]
[ROSE]: ROSE has no ARP

ARP over ROSE does not exist so it's obviously not implemented on any
ROSE stack, so the ROSE interfaces really should default to IFF_NOARP.

Signed-off-by: Ralf Baechle DL5RB <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

14 years ago[NETROM]: NET/ROM has no ARP
Ralf Baechle [Mon, 12 Sep 2005 21:26:26 +0000]
[NETROM]: NET/ROM has no ARP

ARP over NET/ROM does not exist so it's obviously not implemented on any
NET/ROM stack, so the NET/ROM interfaces really should default to IFF_NOARP.

Signed-off-by: Ralf Baechle DL5RB <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

14 years ago[NETROM] NET/ROM has no txqueue
Ralf Baechle [Mon, 12 Sep 2005 21:25:57 +0000]
[NETROM] NET/ROM has no txqueue

NET/ROM uses virtual interfaces so setting a queue length is wrong.

Signed-off-by: Ralf Baechle DL5RB <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

14 years ago[AX.25]: Reformat ax25_proto_ops initialization
Ralf Baechle [Mon, 12 Sep 2005 21:25:25 +0000]
[AX.25]: Reformat ax25_proto_ops initialization

Reformat iniitalization of ax25_proto_ops.

Signed-off-by: Ralf Baechle DL5RB <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

14 years ago[AX.25/ROSE]: Whitespace formatting changes
Ralf Baechle [Mon, 12 Sep 2005 21:24:55 +0000]
[AX.25/ROSE]: Whitespace formatting changes

Small formatting changes.

Signed-off-by: Ralf Baechle DL5RB <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

14 years ago[AX.25]: Add descriptions to constants
Ralf Baechle [Mon, 12 Sep 2005 21:24:24 +0000]
[AX.25]: Add descriptions to constants

Comment the names used for the AX.25 state machine.

Signed-off-by: Ralf Baechle DL5RB <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

14 years ago[NETROM/AX.25/ROSE]: Remove useless tests
Ralf Baechle [Mon, 12 Sep 2005 21:23:52 +0000]
[NETROM/AX.25/ROSE]: Remove useless tests

Remove error tests that have already been performed by the caller.

Signed-off-by: Ralf Baechle DL5RB <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

14 years ago[NETROM]: statistics fix
Ralf Baechle [Mon, 12 Sep 2005 21:23:06 +0000]
[NETROM]: statistics fix

Calling an incoming NET/ROM-encapsulated IP packet an error if the
interface isn't up is probably a bit over the top, so count it as
dropped instead of an error.

Signed-off-by: Ralf Baechle DL5RB <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

14 years ago[AX.25]: Add more PIDs
Ralf Baechle [Mon, 12 Sep 2005 21:22:30 +0000]
[AX.25]: Add more PIDs

Add a few more PID definitions.  AX.25 PIDs are the equivalent to IP
protocol numbers.

Signed-off-by: Ralf Baechle DL5RB <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

14 years ago[NETROM]: Fix rebuild header mess
Ralf Baechle [Mon, 12 Sep 2005 21:21:48 +0000]
[NETROM]: Fix rebuild header mess

For reason that probably nobody recalls NET/ROM does it's actual
packet transmission in nr_rebuild_header and even treats invocation of
it's hard_start_xmit method nr_xmit as a bug.  Fix that by splitting
the job done by nr_rebuild_header into two halves.  Along with that we
now also can get rid of the silly clone of the skb on transmit.

Signed-off-by: Ralf Baechle DL5RB <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

14 years ago[AX.25]: Rename ax25_encapsulate to ax25_hard_header
Ralf Baechle [Mon, 12 Sep 2005 21:21:01 +0000]
[AX.25]: Rename ax25_encapsulate to ax25_hard_header

Rename ax25_encapsulate to ax25_hard_header which these days more
accurately describes what the function is supposed to do.

Signed-off-by: Ralf Baechle DL5RB <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

14 years ago[HAMRADIO]: driver cleanups
Ralf Baechle [Mon, 12 Sep 2005 21:19:26 +0000]
[HAMRADIO]: driver cleanups

Misc related cleanups in hamradio drivers:

 o Use symbolic constants instead of magic numbers
 o Don't try to handle the case where AX.25 isn't configured - the kernel
   configuration doesn't permit that.
 o Remove useless headers

Signed-off-by: Ralf Baechle DL5RB <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

14 years ago[CCID3]: Listen socks doesn't have a private CCID block
Arnaldo Carvalho de Melo [Mon, 12 Sep 2005 21:16:58 +0000]
[CCID3]: Listen socks doesn't have a private CCID block

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

14 years ago[SPARC] drivers/sbus: fix-up schedule_timeout() usage
Nishanth Aravamudan [Mon, 12 Sep 2005 21:16:17 +0000]
[SPARC] drivers/sbus: fix-up schedule_timeout() usage

Use schedule_timeout_uninterruptible() instead of
set_current_state()/schedule_timeout() to reduce kernel size.

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

14 years ago[NET]: fix-up schedule_timeout() usage
Nishanth Aravamudan [Mon, 12 Sep 2005 21:15:34 +0000]
[NET]: fix-up schedule_timeout() usage

Use schedule_timeout_{,un}interruptible() instead of
set_current_state()/schedule_timeout() to reduce kernel size.  Also use
human-time conversion functions instead of hard-coded division to avoid
rounding issues.

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

14 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6
Linus Torvalds [Mon, 12 Sep 2005 20:32:56 +0000]
Merge /pub/scm/linux/kernel/git/gregkh/driver-2.6

14 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6
Linus Torvalds [Mon, 12 Sep 2005 20:32:20 +0000]
Merge /pub/scm/linux/kernel/git/gregkh/usb-2.6

14 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/i2c-2.6
Linus Torvalds [Mon, 12 Sep 2005 20:31:33 +0000]
Merge /pub/scm/linux/kernel/git/gregkh/i2c-2.6

14 years agoMerge ../torvalds-2.6/
Greg KH [Mon, 12 Sep 2005 19:45:04 +0000]
Merge ../torvalds-2.6/

14 years ago[MMC] Clean up wbsd detection handling
Pierre Ossman [Mon, 12 Sep 2005 19:36:19 +0000]
[MMC] Clean up wbsd detection handling

The wbsd driver's card detection routing is a bit of a mess. This
patch cleans up the routine and makes it a bit more comprihensible.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

14 years ago[MMC] Remove unused timer.
Pierre Ossman [Mon, 12 Sep 2005 19:35:54 +0000]
[MMC] Remove unused timer.

Remove timer that was left from earlier cleanup.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

14 years ago[PATCH] crc16: remove w1 specific comments.
Evgeniy Polyakov [Mon, 12 Sep 2005 13:12:43 +0000]
[PATCH] crc16: remove w1 specific comments.

Remove w1 comments from crc16.h and move
specific constants into w1_ds2433.c where they are used.
Replace %d with %zd.

Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/aia21/ntfs-2.6
Linus Torvalds [Mon, 12 Sep 2005 19:34:45 +0000]
Merge /pub/scm/linux/kernel/git/aia21/ntfs-2.6

14 years agoFix fallout from ATI Xpress timer workaround
Linus Torvalds [Mon, 12 Sep 2005 19:32:31 +0000]
Fix fallout from ATI Xpress timer workaround

ACPI earlyquirks needs to honor the proper config variables, and include
the right header file.

(Fixes commit 66759a01adbfe8828dd063e32cf5ed3f46696181)

Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] USB: ftdi_sio: custom baud rate fix
Ian Abbott [Mon, 12 Sep 2005 11:23:25 +0000]
[PATCH] USB: ftdi_sio: custom baud rate fix

ftdi_sio: I messed up the baud_base for custom baud rate support in
2.6.13.  The attached one-liner patch fixes it.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] USB: Usbmon setup DMA patch
Pete Zaitcev [Thu, 1 Sep 2005 21:35:05 +0000]
[PATCH] USB: Usbmon setup DMA patch

Alan Stern sent me this patch. It goes on top of the patch the adds
mon_dmapeek:
 http://ftp.kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/gregkh-04-usb/usb-usbmon-dma-areas.patch

Please be warned about ordering requirements or the build may fail.

Actually, mon_dmapeek is generic enough to support SETUP packets too.

Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] usb: fix uss720 schedule with interrupts off
Thomas Sailer [Fri, 9 Sep 2005 08:43:50 +0000]
[PATCH] usb: fix uss720 schedule with interrupts off

This patch fixes the long standing schedule with interrupts off problem
of the uss720 driver. The problem is caused by the parport layer calling
the save and restore methods within a write_lock_irqsave guarded region.
The fix is to issue the control transaction requests required by save
and restore asynchronously.

Signed-off-by: Thomas Sailer, <sailer@ife.ee.ethz.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] USB: fix usbdevice_fs header breakage
Harald Welte [Sat, 3 Sep 2005 09:27:08 +0000]
[PATCH] USB: fix usbdevice_fs header breakage

[USBDEVFS] fix inclusion of <linux/compat.h> to avoud header mess

Without moving the include of compat.h down, userspace programs that use
usbdevice_fs.h end up including half the kernel includes (and eventually
fail to compile).

Signed-off-by: Harald Welte <laforge@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] USB: usb-storage: Add unusual_devs entry for Neuros Audio MP3 player
Daniel Drake [Wed, 31 Aug 2005 15:38:41 +0000]
[PATCH] USB: usb-storage: Add unusual_devs entry for Neuros Audio MP3 player

Alan Stern wrote:
> If the device sometimes reports the correct values, then you should
> include NEED_OVERRIDE flag to prevent messages about unnecessary
> overrides showing up in the system log.  Also, if bInterfaceSubclass
> is correct and only bInterfaceProtocol is wrong, then the entry should
> say US_SC_DEVICE instead of US_SC_SCSI.

Fair points, thanks.

When connected over USB2, this device reports a nonsense
bInterfaceProtocol value 6 and doesn't work with usb-storage.  When
connected over USB1, the device reports the correct bInterfaceProtocol
value 0x50 (bulk) and works with no problems.

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: Phil Dibowitz <phil@ipom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] USB: storage: Add unusual_dev SINGLE_LUN entries
Phil Dibowitz [Tue, 30 Aug 2005 05:38:28 +0000]
[PATCH] USB: storage: Add unusual_dev SINGLE_LUN entries

This patch adds entries for several USB floppies that need
the US_FL_SINGLE_LUN flag. These were reported by
Sebastian Kapfer <sebastian_kapfer@gmx.net> and Olaf Hering
<olh@suse.de>, with rediffing and cleaning from me.

Reported-by: Sebastian Kapfer <sebastian_kapfer@gmx.net>
Reported-by: Olaf Hering <olh@suse.de>
Signed-off-by: Phil Dibowitz <phil@ipom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] USB Storage: unusual_devs.h request for Transcend
Pete Zaitcev [Tue, 23 Aug 2005 14:46:13 +0000]
[PATCH] USB Storage: unusual_devs.h request for Transcend

The stick replies to the door lock commands with a check condition (e.g.
FAIL status in a normal bulk CSW), but the subsequent REQUEST SENSE
returns all-zero sense. The situation is documented in our Bugzilla,
including usbmon traces.
https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=162559

The error is purely cosmetic, data integrity is not in danger.
But I thought we might as well do it. It looks nicer that way.

I discussed this with Phil and he told me to submit directly.

Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Phil Dibowitz <phil@ipom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] USB: storage: Fix messed-up locking
Matthew Dharm [Fri, 26 Aug 2005 03:03:50 +0000]
[PATCH] USB: storage: Fix messed-up locking

This is patch as550 from Alan Stern.

Apparently someone changed the SCSI core so that it no longer holds the
host lock when doing a device or bus reset.  usb-storage was updated at
the time, but the change was done carelessly.  Some of the code depends
on that lock being held.

This patch reintroduces the host lock where needed and tries to clarify
the comments explaining why the lock is necessary.  It also moves the
code that clears the TIMED_OUT and ABORTING bitflags so that it executes
as soon as the timed-out command has completed (and while the host lock
is held).

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Matthew Dharm <mdharm-usb@one-eyed-alien.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] USB: relax usbcore reset timings
David Brownell [Wed, 31 Aug 2005 17:41:44 +0000]
[PATCH] USB: relax usbcore reset timings

This appears to help some folk, please merge.
This patch relaxes reset timings.  There are some reports that it
helps make enumeration work better on some high speed devices.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] USB: proc_usb_info.txt: add blank lines
Randy Dunlap [Fri, 9 Sep 2005 04:56:56 +0000]
[PATCH] USB: proc_usb_info.txt: add blank lines

Update Documentation/usb/proc_usb_info.txt:
- remove some trailing whitespace
- add a blank line before each T: line to match current kernel
  and to make the text more readable.

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] USB: PL2303: CA-42 Phone cable
Robert Spanton [Tue, 30 Aug 2005 22:38:23 +0000]
[PATCH] USB: PL2303: CA-42 Phone cable

This patch adds the product ID and vendor ID for a Nokia CA-42 USB cable
to the list of devices handled by the pl2303 driver. The patch is
against 2.6.13.

Signed-off-by: Robert Spanton <rds204@zepler.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] USB: OHCI, pxa27x OHCI port power tweaks
David Brownell [Wed, 31 Aug 2005 18:54:09 +0000]
[PATCH] USB: OHCI, pxa27x OHCI port power tweaks

Now that it's in use on other boards, a bug in the original code needs fixing.

There is no need for the PXA27x OHCI to set usb power during init, since
the hub driver in usbcore handles that. Those platform-specific power
control functions are also incorrect, and should therefore be removed.

Add a check to clear the OTG pin hold bit until such times OTG is
properly implemented.

Signed-Off-By: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] USB: OHCI relies less on NDP register
David Brownell [Wed, 31 Aug 2005 18:52:57 +0000]
[PATCH] USB: OHCI relies less on NDP register

Some OHCI implementations have differences in the way the NDP register
(in roothub_a) reports the number of ports present. This patch allows the
platform specific code to optionally supply the number of ports. The
driver just reads the value at init (if not supplied) instead of reading
it every time its needed (except for an AMD756 bug workaround).

It also sets the value correctly for the ARM pxa27x architecture.

Signed-Off-By: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] USB: OHCI irq tweak
David Brownell [Wed, 31 Aug 2005 17:47:20 +0000]
[PATCH] USB: OHCI irq tweak

Evidently there are some boards which care a lot about this, but
as a rule it's been hard to notice.

OHCI_INTR_RD wasn't always cleared in the ohci irq handler.  On some
systems this means certain remote wakeup scenarios could seem to hang
(in an interrupt storm, RD never clearing).

From: "William Morrow" <William.Morrow@amd.com>
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] USB gadgetfs: fixes an error on writing to endpoint file
Pavol Kurina [Wed, 7 Sep 2005 16:49:34 +0000]
[PATCH] USB gadgetfs: fixes an error on writing to endpoint file

this patch fixes an "Invalid argument" error returned by a write to an
endpoint-file after reopening it in the gadgetfs module in the kernel
2.6.12.

This was testet only with dummy_hcd module!

Signed-off-by: Pavol Kurina <kurina@gmx.net>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

14 years ago[PATCH] drivers/usb: fix-up schedule_timeout() usage
Nishanth Aravamudan [Mon, 15 Aug 2005 18:30:11 +0000]
[PATCH] drivers/usb: fix-up schedule_timeout() usage

Description: Use schedule_timeout_{,un}interruptible() instead of
set_current_state()/schedule_timeout() to reduce kernel size.

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] USB: get rid of minor log spamming
David Brownell [Wed, 31 Aug 2005 17:45:25 +0000]
[PATCH] USB: get rid of minor log spamming

Routine cases like handoff-to-companion shouldn't trigger diagnostics.
This gets rid of some recently added log spamming.  It's routine for
hub_port_wait_reset() to return -ENOTCONN to indicate handoff from
highspeed hubs to companions, so an error message is incorrect.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] USB: EHCI workaround for NForce and mem > 2GB
David Brownell [Sat, 3 Sep 2005 01:58:09 +0000]
[PATCH] USB: EHCI workaround for NForce and mem > 2GB

NVidia reports (via Mark Overby) that some of their EHCI controllers
don't like certain data structure addresses beyond the 2GB mark.
He provided an earlier version of this patch.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] USB: EHCI port tweaks
David Brownell [Wed, 31 Aug 2005 17:55:38 +0000]
[PATCH] USB: EHCI port tweaks

One change may improve some S1 or S3 resume cases, and the other
seems mostly to explain some strange state "lsusb" would show.
Two fixes:

  - On resume, don't think about resuming any unpowered port, or
    resetting any port with OWNER set to the OHCI/UHCI companion.
    This will make some S1 and S3 resume scenarios work better.

  - PORT_CSC was not being cleared correctly in ehci_hub_status_data.
    This was visible at least through current versions of "lsusb",
    and might have caused some other hub related strangeness.

    The fix addresses all three write-to-clear bits, using the same
    approach that UHCI happens to use:  a mask of bits that are
    cleared in most writes to that port status register.

Original patch seems to have been from from William.Morrow@amd.com
and this version (from David) finishes the write-to-clear changes.

Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] USB: CP2101 New Device IDs
Craig Shelley [Sun, 28 Aug 2005 08:51:15 +0000]
[PATCH] USB: CP2101 New Device IDs

Three new device IDs for CP2101 USB to UART Bridge

Signed-off-by: Craig Shelley <craig@microtron.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] USB UHCI: remove the FSBR kernel timer
Alan Stern [Mon, 5 Sep 2005 17:59:51 +0000]
[PATCH] USB UHCI: remove the FSBR kernel timer

This patch (as558) removes from the UHCI driver a kernel timer used for
checking Full Speed Bandwidth Reclamation (FSBR).  The checking can be
done during normal root-hub polling; it doesn't need a separate timer.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] usbcore: small changes to HCD glue layer
Alan Stern [Mon, 5 Sep 2005 17:55:23 +0000]
[PATCH] usbcore: small changes to HCD glue layer

This patch (as549) introduces two small changes in the HCD glue layer.
The first simply removes a redundant test.  The second allows root-hub
polling to continue for a single iteration after a host controller dies;
this is needed for the patch that follows.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 years ago[PATCH] USB: add apple usb touchpad driver
Stelian Pop [Thu, 8 Sep 2005 08:19:48 +0000]
[PATCH] USB: add apple usb touchpad driver

This is a driver for the USB touchpad which can be found on post-February 2005
Apple PowerBooks.

This driver is derived from Johannes Berg's appletrackpad driver [1],
but it has been improved in some areas:
    * appletouch is a full kernel driver, no userspace program is necessary
    * appletouch can be interfaced with the synaptics X11 driver[2], in order
      to have touchpad acceleration, scrolling, two/three finger tap, etc.

This driver has been tested by the readers of the 'debian-powerpc' mailing
list for a few weeks now and I believe it is now ready for inclusion into the
mainline kernel.

Credits go to Johannes Berg for reverse-engineering the touchpad protocol,
Frank Arnold for further improvements, and Alex Harper for some additional
information about the inner workings of the touchpad sensors.

Signed-off-by: Stelian Pop <stelian@popies.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>