7 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc
Linus Torvalds [Fri, 22 Jul 2011 20:44:18 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/cjb/mmc

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (78 commits)
  mmc: MAINTAINERS: add myself as a tmio-mmc maintainer
  mmc: print debug messages for runtime PM actions
  mmc: fix runtime PM with -ENOSYS suspend case
  mmc: at91_mci: move register header from include/ to drivers/
  mmc: mxs-mmc: fix clock rate setting
  mmc: tmio: fix a deadlock
  mmc: tmio: fix a recently introduced bug in DMA code
  mmc: sh_mmcif: maximize power saving
  mmc: tmio: maximize power saving
  mmc: tmio: fix recursive spinlock, don't schedule with interrupts disabled
  mmc: Added quirks for Ricoh 1180:e823 lower base clock frequency
  mmc: omap_hsmmc: fix oops in omap_hsmmc_dma_cb()
  mmc: omap_hsmmc: refactor duplicated code
  mmc: omap_hsmmc: fix a few bugs when setting the clock divisor
  mmc: omap_hsmmc: introduce start_clock and re-use stop_clock
  mmc: omap_hsmmc: split duplicate code to calc_divisor() function
  mmc: omap_hsmmc: move hardcoded frequency constants to defines
  mmc: omap_hsmmc: correct debug report error status mnemonics
  mmc: block: fixed NULL pointer dereference
  mmc: documentation of mmc non-blocking request usage and design.
  ...

7 years agoMerge branch 'for-linus' of git://oss.sgi.com/xfs/xfs
Linus Torvalds [Fri, 22 Jul 2011 20:16:33 +0000]
Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfs

* 'for-linus' of git://oss.sgi.com/xfs/xfs: (49 commits)
  xfs: add size update tracepoint to IO completion
  xfs: convert AIL cursors to use struct list_head
  xfs: remove confusing ail cursor wrapper
  xfs: use a cursor for bulk AIL insertion
  xfs: failure mapping nfs fh to inode should return ESTALE
  xfs: Remove the second parameter to xfs_sb_count()
  xfs: remove the dead XFS_DABUF_DEBUG code
  xfs: remove leftovers of the old btree tracing code
  xfs: remove the dead QUOTADEBUG code
  xfs: remove the unused xfs_buf_delwri_sort function
  xfs: remove wrappers around b_iodone
  xfs: remove wrappers around b_fspriv
  xfs: add a proper transaction pointer to struct xfs_buf
  xfs: factor out xfs_da_grow_inode_int
  xfs: factor out xfs_dir2_leaf_find_stale
  xfs: cleanup struct xfs_dir2_free
  xfs: reshuffle dir2 headers
  xfs: start periodic workers later
  Revert "xfs: fix filesystsem freeze race in xfs_trans_alloc"
  xfs: remove variables that serve no purpose in xfs_alloc_ag_vextent_exact()
  ...

7 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm
Linus Torvalds [Fri, 22 Jul 2011 20:16:07 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/teigland/dlm

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm:
  dlm: don't limit active work items
  dlm: use workqueue for callbacks
  dlm: remove deadlock debug print
  dlm: improve rsb searches
  dlm: keep lkbs in idr
  dlm: fix kmalloc args
  dlm: don't do pointless NULL check, use kzalloc and fix order of arguments
  dlm: dump address of unknown node
  dlm: use vmalloc for hash tables
  dlm: show addresses in configfs

7 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hch/hfsplus
Linus Torvalds [Fri, 22 Jul 2011 20:12:17 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/hch/hfsplus

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hch/hfsplus:
  hfsplus: ensure bio requests are not smaller than the hardware sectors
  hfsplus: Add additional range check to handle on-disk corruptions
  hfsplus: Add error propagation for hfsplus_ext_write_extent_locked
  hfsplus: add error checking for hfs_find_init()
  hfsplus: lift the 2TB size limit
  hfsplus: fix overflow in hfsplus_read_wrapper
  hfsplus: fix overflow in hfsplus_get_block
  hfsplus: assignments inside `if' condition clean-up

7 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw
Linus Torvalds [Fri, 22 Jul 2011 20:10:41 +0000]
Merge git://git./linux/kernel/git/steve/gfs2-2.6-nmw

* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw:
  GFS2: combine duplicated block freeing routines
  GFS2: Add S_NOSEC support
  GFS2: Automatically adjust glock min hold time
  GFS2: Cache dir hash table in a contiguous buffer

7 years agoMerge branch 'linux-next' of git://git.infradead.org/ubi-2.6
Linus Torvalds [Fri, 22 Jul 2011 20:09:55 +0000]
Merge branch 'linux-next' of git://git.infradead.org/ubi-2.6

* 'linux-next' of git://git.infradead.org/ubi-2.6:
  UBI: clarify the volume notification types' doc
  UBI: remove dead code
  UBI: dump stack when switching to R/O mode
  UBI: fix oops in error path
  UBI: switch debugging tests knobs to debugfs
  UBI: make it possible to use struct ubi_device in debug.h
  UBI: prepare debugging stuff to further debugfs conversion
  UBI: use debugfs for the extra checks knobs
  UBI: change the interface of a debugging check function

7 years agoMerge branch 'linux-next' of git://git.infradead.org/ubifs-2.6
Linus Torvalds [Fri, 22 Jul 2011 20:09:35 +0000]
Merge branch 'linux-next' of git://git.infradead.org/ubifs-2.6

* 'linux-next' of git://git.infradead.org/ubifs-2.6: (32 commits)
  MAINTAINERS: change e-mail of Adrian Hunter
  UBIFS: fix master node recovery
  UBIFS: improve power cut emulation testing
  UBIFS: rename recovery testing variables
  UBIFS: remove custom list of superblocks
  UBIFS: stop re-defining UBI operations
  UBIFS: switch to I/O helpers
  UBIFS: switch to ubifs_leb_write
  UBIFS: switch to ubifs_leb_read
  UBIFS: introduce more I/O helpers
  UBIFS: always print stacktrace when switching to R/O mode
  UBIFS: remove unused and unneeded debugging function
  UBIFS: add global debugfs knobs
  UBIFS: introduce debugfs helpers
  UBIFS: re-arrange debugging code a bit
  UBIFS: be more informative in failure mode
  UBIFS: switch self-check knobs to debugfs
  UBIFS: lessen amount of debugging check types
  UBIFS: introduce helper functions for debugging checks and tests
  UBIFS: amend debugging inode size check function prototype
  ...

7 years agoMerge branch 'slab-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penber...
Linus Torvalds [Fri, 22 Jul 2011 19:44:30 +0000]
Merge branch 'slab-for-linus' of git://git./linux/kernel/git/penberg/slab-2.6

* 'slab-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6:
  slab: fix DEBUG_SLAB warning
  slab: shrink sizeof(struct kmem_cache)
  slab: fix DEBUG_SLAB build
  SLUB: Fix missing <linux/stacktrace.h> include
  slub: reduce overhead of slub_debug
  slub: Add method to verify memory is not freed
  slub: Enable backtrace for create/delete points
  slab allocators: Provide generic description of alignment defines
  slab, slub, slob: Unify alignment definition
  slob/lockdep: Fix gfp flags passed to lockdep

7 years agohfsplus: ensure bio requests are not smaller than the hardware sectors
Seth Forshee [Mon, 18 Jul 2011 15:06:23 +0000]
hfsplus: ensure bio requests are not smaller than the hardware sectors

Currently all bio requests are 512 bytes, which may fail for media
whose physical sector size is larger than this. Ensure these
requests are not smaller than the block device logical block size.

BugLink: http://bugs.launchpad.net/bugs/734883
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

7 years agohfsplus: Add additional range check to handle on-disk corruptions
Naohiro Aota [Mon, 11 Jul 2011 17:54:13 +0000]
hfsplus: Add additional range check to handle on-disk corruptions

'recoff' is read from disk and used for an argument to memcpy, so if
the value read from disk is larger than the page size, it result to
"general protection fault". This patch add additional range check for
the value, so that disk fuzz won't cause such fault.

Signed-off-by: Naohiro Aota <naota@elisp.net>
Signed-off-by: Christoph Hellwig <hch@lst.de>

7 years agoslab: fix DEBUG_SLAB warning
Tetsuo Handa [Thu, 21 Jul 2011 00:42:45 +0000]
slab: fix DEBUG_SLAB warning

In commit c225150b "slab: fix DEBUG_SLAB build",
"if ((unsigned long)objp & (ARCH_SLAB_MINALIGN-1))" is always true if
ARCH_SLAB_MINALIGN == 0. Do not print warning if ARCH_SLAB_MINALIGN == 0.

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Pekka Enberg <penberg@kernel.org>

7 years agoMAINTAINERS: change e-mail of Adrian Hunter
Artem Bityutskiy [Fri, 22 Jul 2011 07:55:50 +0000]
MAINTAINERS: change e-mail of Adrian Hunter

... he does not work in Nokia any longer.

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>

7 years agoLinux 3.0
Linus Torvalds [Fri, 22 Jul 2011 02:17:23 +0000]
Linux 3.0

7 years agoMerge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel...
Linus Torvalds [Fri, 22 Jul 2011 00:20:57 +0000]
Merge branch 'for_linus' of git://git./linux/kernel/git/jwessel/linux-2.6-kgdb

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb:
  sparc,kgdbts: fix compile regression with kgdb test suite

7 years agosparc,kgdbts: fix compile regression with kgdb test suite
Jason Wessel [Tue, 19 Jul 2011 20:43:16 +0000]
sparc,kgdbts: fix compile regression with kgdb test suite

Commit 63ab25ebbc (kgdbts: unify/generalize gdb breakpoint adjustment)
introduced a compile regression on sparc.

kgdbts.c: In function 'check_and_rewind_pc':
kgdbts.c:307: error: implicit declaration of function 'instruction_pointer_set'

Simply add the correct macro definition for instruction pointer on the
Sparc architecture.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: David S. Miller <davem@davemloft.net>

7 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6
Linus Torvalds [Thu, 21 Jul 2011 21:28:01 +0000]
Merge git://git./linux/kernel/git/sfrench/cifs-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  CIFS: Fix wrong length in cifs_iovec_read

7 years agoMerge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Thu, 21 Jul 2011 19:25:39 +0000]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Make Dell Latitude E6420 use reboot=pci
  x86: Make Dell Latitude E5420 use reboot=pci

7 years agox86: Make Dell Latitude E6420 use reboot=pci
H. Peter Anvin [Thu, 21 Jul 2011 18:22:21 +0000]
x86: Make Dell Latitude E6420 use reboot=pci

Yet another variant of the Dell Latitude series which requires
reboot=pci.

From the E5420 bug report by Daniel J Blueman:

> The E6420 is affected also (same platform, different casing and
> features), which provides an external confirmation of the issue; I can
> submit a patch for that later or include it if you prefer:
> http://linux.koolsolutions.com/2009/08/04/howto-fix-linux-hangfreeze-during-reboots-and-restarts/

Reported-by: Daniel J Blueman <daniel.blueman@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: <stable@kernel.org>

7 years agox86: Make Dell Latitude E5420 use reboot=pci
Daniel J Blueman [Fri, 13 May 2011 01:04:59 +0000]
x86: Make Dell Latitude E5420 use reboot=pci

Rebooting on the Dell E5420 often hangs with the keyboard or ACPI
methods, but is reliable via the PCI method.

[ hpa: this was deferred because we believed for a long time that the
  recent reshuffling of the boot priorities in commit
  660e34cebf0a11d54f2d5dd8838607452355f321 fixed this platform.
  Unfortunately that turned out to be incorrect. ]

Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com>
Link: http://lkml.kernel.org/r/1305248699-2347-1-git-send-email-daniel.blueman@gmail.com
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: <stable@kernel.org>

7 years agoMerge branch 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/keith...
Linus Torvalds [Thu, 21 Jul 2011 18:07:18 +0000]
Merge branch 'drm-intel-fixes' of git://git./linux/kernel/git/keithp/linux-2.6

* 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/keithp/linux-2.6:
  drm/i915: Fix unfenced alignment on pre-G33 hardware
  drm/i915: Add quirk to disable SSC on Lenovo U160 LVDS

7 years agovfs: drop conditional inode prefetch in __do_lookup_rcu
Linus Torvalds [Thu, 21 Jul 2011 18:01:42 +0000]
vfs: drop conditional inode prefetch in __do_lookup_rcu

It seems to hurt performance in real life.  Yes, the inode will be used
later, but the conditional doesn't seem to predict all that well
(negative dentries are not uncommon) and it looks like the cost of
prefetching is simply higher than depending on the cache doing the right
thing.

As usual.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoFS-Cache: Fix __fscache_uncache_all_inode_pages()'s outer loop
Jan Beulich [Thu, 21 Jul 2011 14:02:43 +0000]
FS-Cache: Fix __fscache_uncache_all_inode_pages()'s outer loop

The compiler, at least for ix86 and m68k, validly warns that the
comparison:

next <= (loff_t)-1

is always true (and it's always true also for x86-64 and probably all
other arches - as long as pgoff_t isn't wider than loff_t).  The
intention appears to be to avoid wrapping of "next", so rather than
eliminating the pointless comparison, fix the loop to indeed get exited
when "next" would otherwise wrap.

On m68k the following warning is observed:

  fs/fscache/page.c: In function '__fscache_uncache_all_inode_pages':
  fs/fscache/page.c:979: warning: comparison is always false due to limited range of data type

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Suresh Jayaraman <sjayaraman@suse.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agommc: MAINTAINERS: add myself as a tmio-mmc maintainer
Guennadi Liakhovetski [Sun, 17 Jul 2011 20:04:07 +0000]
mmc: MAINTAINERS: add myself as a tmio-mmc maintainer

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Chris Ball <cjb@laptop.org>

7 years agommc: print debug messages for runtime PM actions
Daniel Drake [Sun, 17 Jul 2011 15:38:41 +0000]
mmc: print debug messages for runtime PM actions

At http://www.mail-archive.com/linux-mmc@vger.kernel.org/msg08371.html
(thread: "mmc: sdio: reset card during power_restore") we found and
fixed a bug where mmc's runtime power management functions were not being
called. We have now also made improvements to the SDIO powerup routine
which could possibly mask this kind of issue in future.

Add debug messages to the runtime PM hooks so that it is easy to verify
if and when runtime PM is happening.

Signed-off-by: Daniel Drake <dsd@laptop.org>
Signed-off-by: Chris Ball <cjb@laptop.org>

7 years agommc: fix runtime PM with -ENOSYS suspend case
Ohad Ben-Cohen [Sun, 17 Jul 2011 15:38:21 +0000]
mmc: fix runtime PM with -ENOSYS suspend case

In the case where a driver returns -ENOSYS from its suspend handler
to indicate that the device should be powered down over suspend, the
remove routine of the driver was not being called, leading to lots of
confusion during resume.

The problem is that runtime PM is disabled during this process,
and when we reach mmc_sdio_remove, calling the runtime PM functions here
(validly) return errors, and this was causing us to skip the remove
function.

Fix this by ignoring the error value of pm_runtime_get_sync(), which
can return valid errors. This also matches the behaviour of
pci_device_remove().

Signed-off-by: Daniel Drake <dsd@laptop.org>
Signed-off-by: Chris Ball <cjb@laptop.org>

7 years agommc: at91_mci: move register header from include/ to drivers/
Jean-Christophe PLAGNIOL-VILLARD [Thu, 14 Jul 2011 23:52:01 +0000]
mmc: at91_mci: move register header from include/ to drivers/

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

7 years agommc: mxs-mmc: fix clock rate setting
Koen Beel [Fri, 15 Jul 2011 21:39:00 +0000]
mmc: mxs-mmc: fix clock rate setting

Fix clock rate setting in the mxs-mmc driver. Previously, if div2 was 0
then the value for TIMING_CLOCK_RATE would have been 255 instead of 0.
The limits for div1 (TIMING_CLOCK_DIVIDE) and div2 (TIMING_CLOCK_RATE+1)
were also not correctly defined.

Can easily be reproduced on mx23evk: default clock for high speed sdio
cards is 50 MHz. With a SSP_CLK of 28.8 MHz default), this resulted in
an actual clock rate of about 56 kHz.  Tested on mx23evk.

Signed-off-by: Koen Beel <koen.beel@barco.com>
Reviewed-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Chris Ball <cjb@laptop.org>

7 years agommc: tmio: fix a deadlock
Guennadi Liakhovetski [Thu, 14 Jul 2011 16:39:10 +0000]
mmc: tmio: fix a deadlock

Currently the tmio-mmc driver contains a recursive runtime PM method
invocation, which leads to a deadlock on a mutex. Avoid it by taking
care not to request DMA too early.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Chris Ball <cjb@laptop.org>

7 years agommc: tmio: fix a recently introduced bug in DMA code
Guennadi Liakhovetski [Thu, 14 Jul 2011 16:39:06 +0000]
mmc: tmio: fix a recently introduced bug in DMA code

A recent commit "mmc: tmio: Share register access functions" has swapped
arguments of a macro and broken DMA with TMIO MMC. This patch fixes the
arguments back.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Chris Ball <cjb@laptop.org>

7 years agommc: sh_mmcif: maximize power saving
Guennadi Liakhovetski [Thu, 26 May 2011 13:33:30 +0000]
mmc: sh_mmcif: maximize power saving

This patch uses runtime PM to allow the system to power down the MMC
controller, when the MMC closk is switched off.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Chris Ball <cjb@laptop.org>

7 years agommc: tmio: maximize power saving
Guennadi Liakhovetski [Thu, 14 Jul 2011 10:16:59 +0000]
mmc: tmio: maximize power saving

This patch uses runtime PM to allow the system to power down the MMC
controller, when the MMC closk is switched off.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Chris Ball <cjb@laptop.org>

7 years agommc: tmio: fix recursive spinlock, don't schedule with interrupts disabled
Guennadi Liakhovetski [Thu, 14 Jul 2011 10:12:38 +0000]
mmc: tmio: fix recursive spinlock, don't schedule with interrupts disabled

Calling mmc_request_done() under a spinlock with interrupts disabled
leads to a recursive spin-lock on request retry path and to
scheduling in atomic context. This patch fixes both these problems
by moving mmc_request_done() to the scheduler workqueue.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Chris Ball <cjb@laptop.org>

7 years agommc: Added quirks for Ricoh 1180:e823 lower base clock frequency
Manoj Iyer [Mon, 11 Jul 2011 21:28:35 +0000]
mmc: Added quirks for Ricoh 1180:e823 lower base clock frequency

Ricoh 1180:e823 does not recognize certain types of SD/MMC cards,
as reported at http://launchpad.net/bugs/773524.  Lowering the SD
base clock frequency from 200Mhz to 50Mhz fixes this issue. This
solution was suggest by Koji Matsumuro, Ricoh Company, Ltd.

This change has no negative performance effect on standard SD
cards, though it's quite possible that there will be one on
UHS-1 cards.

Signed-off-by: Manoj Iyer <manoj.iyer@canonical.com>
Tested-by: Daniel Manrique <daniel.manrique@canonical.com>
Cc: Koji Matsumuro <matsumur@nts.ricoh.co.jp>
Cc: <stable@kernel.org>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Chris Ball <cjb@laptop.org>

7 years agommc: omap_hsmmc: fix oops in omap_hsmmc_dma_cb()
Adrian Hunter [Fri, 6 May 2011 09:14:11 +0000]
mmc: omap_hsmmc: fix oops in omap_hsmmc_dma_cb()

In the case of an I/O error, the DMA will have been cleaned up in
the MMC interrupt and the request structure pointer will be null.

In that case, it is essential to check if the DMA is over before
dereferencing host->mrq->data.

Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

7 years agommc: omap_hsmmc: refactor duplicated code
Andy Shevchenko [Wed, 13 Jul 2011 15:31:15 +0000]
mmc: omap_hsmmc: refactor duplicated code

There are a few places with the same functionality. This patch creates
two functions omap_hsmmc_set_bus_width() and omap_hsmmc_set_bus_mode()
to do the job.

Signed-off-by: Andy Shevchenko <ext-andriy.shevchenko@nokia.com>
Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

7 years agommc: omap_hsmmc: fix a few bugs when setting the clock divisor
Andy Shevchenko [Fri, 6 May 2011 09:14:06 +0000]
mmc: omap_hsmmc: fix a few bugs when setting the clock divisor

There are two pieces of code which are similar, but not the same.
Each of them contains a bug.

The SYSCTL register should be read before writing to it in
omap_hsmmc_context_restore() to retain the state of the reserved bits.

Before setting the clock divisor and DTO bits the value from the SYSCTL
register should be masked properly. We were lucky to have no problems
with DTO bits. So, make sure we have clear DTO bits properly in
omap_hsmmc_set_ios().

Additionally get rid of msleep(1). The actual time is rarely higher
than 30us on OMAP 3630.

The resulting pieces of code are refactored into the
omap_hsmmc_set_clock() function.

Signed-off-by: Andy Shevchenko <ext-andriy.shevchenko@nokia.com>
Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

7 years agommc: omap_hsmmc: introduce start_clock and re-use stop_clock
Andy Shevchenko [Fri, 6 May 2011 09:14:05 +0000]
mmc: omap_hsmmc: introduce start_clock and re-use stop_clock

There is similar code in two functions which enable the clock.  Refactor
this code to omap_hsmmc_start_clock(). Re-use omap_hsmmc_stop_clock() in
omap_hsmmc_context_restore() as well.

Signed-off-by: Andy Shevchenko <ext-andriy.shevchenko@nokia.com>
Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

7 years agommc: omap_hsmmc: split duplicate code to calc_divisor() function
Andy Shevchenko [Tue, 10 May 2011 12:51:54 +0000]
mmc: omap_hsmmc: split duplicate code to calc_divisor() function

There are two places where the same calculations are done.
Let's split them into a separate function.

In addition, simplify by using the DIV_ROUND_UP kernel macro.

Signed-off-by: Andy Shevchenko <ext-andriy.shevchenko@nokia.com>
Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

7 years agommc: omap_hsmmc: move hardcoded frequency constants to defines
Andy Shevchenko [Wed, 13 Jul 2011 15:16:29 +0000]
mmc: omap_hsmmc: move hardcoded frequency constants to defines

Move the min and max frequency constants to the definition block in
the source file.

Signed-off-by: Andy Shevchenko <ext-andriy.shevchenko@nokia.com>
Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

7 years agommc: omap_hsmmc: correct debug report error status mnemonics
Adrian Hunter [Fri, 6 May 2011 09:14:01 +0000]
mmc: omap_hsmmc: correct debug report error status mnemonics

CERR and BADA were in the wrong place and there are only
32 not 35.

Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Reviewed-by: Venkatraman S <svenkatr@ti.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

7 years agommc: block: fixed NULL pointer dereference
Jaehoon Chung [Wed, 13 Jul 2011 08:02:16 +0000]
mmc: block: fixed NULL pointer dereference

We already check for ongoing async transfers when handling discard
requests, but not in mmc_blk_issue_flush().  This patch fixes that
omission.

Tested with an SDHCI controller and eMMC4.41.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Per Forlin <per.forlin@linaro.org>
Cc: <stable@kernel.org>
Signed-off-by: Chris Ball <cjb@laptop.org>

7 years agommc: documentation of mmc non-blocking request usage and design.
Per Forlin [Sun, 10 Jul 2011 19:21:59 +0000]
mmc: documentation of mmc non-blocking request usage and design.

Documentation about the background and the design of mmc non-blocking.
Host driver guidelines to minimize request preparation overhead.

Signed-off-by: Per Forlin <per.forlin@linaro.org>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Chris Ball <cjb@laptop.org>

7 years agoCIFS: Fix wrong length in cifs_iovec_read
Pavel Shilovsky [Wed, 20 Jul 2011 14:24:09 +0000]
CIFS: Fix wrong length in cifs_iovec_read

Signed-off-by: Pavel Shilovsky <piastryyy@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>

7 years agoxfs: add size update tracepoint to IO completion
Dave Chinner [Mon, 18 Jul 2011 03:40:19 +0000]
xfs: add size update tracepoint to IO completion

For improving insight into IO completion behaviour.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>

7 years agoxfs: convert AIL cursors to use struct list_head
Dave Chinner [Mon, 18 Jul 2011 03:40:18 +0000]
xfs: convert AIL cursors to use struct list_head

The list of active AIL cursors uses a roll-your-own linked list with
special casing for the AIL push cursor. Simplify this code by
replacing the list with standard struct list_head lists, and use a
separate list_head to track the active cursors. This allows us to
treat the AIL push cursor as a generic cursor rather than as a
special case, further simplifying the code.

Further, fix the duplicate push cursor initialisation that the
special case handling was hiding, and clean up all the comments
around the active cursor list handling.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>

7 years agoxfs: remove confusing ail cursor wrapper
Dave Chinner [Mon, 18 Jul 2011 03:40:17 +0000]
xfs: remove confusing ail cursor wrapper

xfs_trans_ail_cursor_set() doesn't set the cursor to the current log
item, it sets it to the next item. There is already a function for
doing this - xfs_trans_ail_cursor_next() - and the _set function is
simply a two line wrapper.  Remove it and open code the setting of
the cursor in the two locations that call it to remove the
confusion.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>

7 years agoxfs: use a cursor for bulk AIL insertion
Dave Chinner [Mon, 18 Jul 2011 03:40:16 +0000]
xfs: use a cursor for bulk AIL insertion

Delayed logging can insert tens of thousands of log items into the
AIL at the same LSN. When the committing of log commit records
occur, we can get insertions occurring at an LSN that is not at the
end of the AIL. If there are thousands of items in the AIL on the
tail LSN, each insertion has to walk the AIL to find the correct
place to insert the new item into the AIL. This can consume large
amounts of CPU time and block other operations from occurring while
the traversals are in progress.

To avoid this repeated walk, use a AIL cursor to record
where we should be inserting the new items into the AIL without
having to repeat the walk. The cursor infrastructure already
provides this functionality for push walks, so is a simple extension
of existing code. While this will not avoid the initial walk, it
will avoid repeating it tens of thousands of times during a single
checkpoint commit.

This version includes logic improvements from Christoph Hellwig.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>

7 years agoxfs: failure mapping nfs fh to inode should return ESTALE
J. Bruce Fields [Thu, 14 Jul 2011 20:50:36 +0000]
xfs: failure mapping nfs fh to inode should return ESTALE

On xfs exports, nfsd is incorrectly returning ENOENT instead of
ESTALE on attempts to use a filehandle of a deleted file (spotted
with pynfs test PUTFH3).  The ENOENT was coming from xfs_iget.

(It's tempting to wonder whether we should just map all xfs_iget
errors to ESTALE, but I don't believe so--xfs_iget can also return
ENOMEM at least, which we wouldn't want mapped to ESTALE.)

While we're at it, the other return of ENOENT in xfs_nfs_get_inode()
also looks wrong.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Alex Elder <aelder@sgi.com>

7 years agoxfs: Remove the second parameter to xfs_sb_count()
Chandra Seetharaman [Wed, 29 Jun 2011 22:10:14 +0000]
xfs: Remove the second parameter to xfs_sb_count()

Remove the second parameter to xfs_sb_count() since all callers of
the function set them.

Also, fix the header comment regarding it being called periodically.

Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: Alex Elder <aelder@sgi.com>

7 years agoMerge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Wed, 20 Jul 2011 22:56:25 +0000]
Merge branch 'core-urgent-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  signal: align __lock_task_sighand() irq disabling and RCU
  softirq,rcu: Inform RCU of irq_exit() activity
  sched: Add irq_{enter,exit}() to scheduler_ipi()
  rcu: protect __rcu_read_unlock() against scheduler-using irq handlers
  rcu: Streamline code produced by __rcu_read_unlock()
  rcu: Fix RCU_BOOST race handling current->rcu_read_unlock_special
  rcu: decrease rcu_report_exp_rnp coupling with scheduler

7 years agoMerge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Wed, 20 Jul 2011 22:55:48 +0000]
Merge branch 'sched-urgent-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: Avoid creating superfluous NUMA domains on non-NUMA systems
  sched: Allow for overlapping sched_domain spans
  sched: Break out cpu_power from the sched_group structure

7 years agoMerge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Wed, 20 Jul 2011 22:33:59 +0000]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86. reboot: Make Dell Latitude E6320 use reboot=pci
  x86, doc only: Correct real-mode kernel header offset for init_size
  x86: Disable AMD_NUMA for 32bit for now

7 years agommc: omap_hsmmc: Remove unused iclk
Balaji T K [Fri, 1 Jul 2011 16:39:36 +0000]
mmc: omap_hsmmc: Remove unused iclk

After runtime conversion to handle clk, iclk node is not used.
However fclk node is still used to get clock rate.

Signed-off-by: Balaji T K <balajitk@ti.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

7 years agommc: omap_hsmmc: add runtime pm support
Balaji T K [Fri, 1 Jul 2011 16:39:35 +0000]
mmc: omap_hsmmc: add runtime pm support

* Add runtime pm support to HSMMC host controller.
* Use runtime pm API to enable/disable HSMMC clock.
* Use runtime autosuspend APIs to enable auto suspend delay.

Based on OMAP HSMMC runtime implementation by Kevin Hilman and
Kishore Kadiyala.

Signed-off-by: Balaji T K <balajitk@ti.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

7 years agommc: omap_hsmmc: Remove lazy_disable
Balaji T K [Fri, 1 Jul 2011 16:39:34 +0000]
mmc: omap_hsmmc: Remove lazy_disable

lazy_disable framework in OMAP HSMMC manages multiple low power states and
card is powered off after inactivity time of 8 seconds.  Based on previous
discussion on the list, card power (regulator) handling (when to power
OFF/ON) should ideally be handled by core layer.  Remove usage of lazy
disable to allow core layer _only_ to handle card power.  With the removal
of lazy disable framework, MMC regulators are left ON until MMC_POWER_OFF
via set_ios.

Signed-off-by: Balaji T K <balajitk@ti.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

7 years agommc: core: Set non-default Drive Strength via platform hook
Philip Rakity [Wed, 6 Jul 2011 15:51:32 +0000]
mmc: core: Set non-default Drive Strength via platform hook

Non default Drive Strength cannot be set automatically.  It is a function
of the board design and only if there is a specific platform handler can
it be set.  The platform handler needs to take into account the board
design.  Pass to the platform code the necessary information.

For example:  The card and host controller may indicate they support HIGH
and LOW drive strength.  There is no way to know what should be chosen
without specific board knowledge.  Setting HIGH may lead to reflections
and setting LOW may not suffice.  There is no mechanism (like ethernet
duplex or speed pulses) to determine what should be done automatically.

If no platform handler is defined -- use the default value.

Signed-off-by: Philip Rakity <prakity@marvell.com>
Reviewed-by: Arindam Nath <arindam.nath@amd.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

7 years agommc: block: add handling for two parallel block requests in issue_rw_rq
Per Forlin [Fri, 1 Jul 2011 16:55:33 +0000]
mmc: block: add handling for two parallel block requests in issue_rw_rq

Change mmc_blk_issue_rw_rq() to become asynchronous.
The execution flow looks like this:

* The mmc-queue calls issue_rw_rq(), which sends the request
  to the host and returns back to the mmc-queue.
* The mmc-queue calls issue_rw_rq() again with a new request.
* This new request is prepared in issue_rw_rq(), then it waits for
  the active request to complete before pushing it to the host.
* When the mmc-queue is empty it will call issue_rw_rq() with a NULL
  req to finish off the active request without starting a new request.

Signed-off-by: Per Forlin <per.forlin@linaro.org>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Venkatraman S <svenkatr@ti.com>
Tested-by: Sourav Poddar <sourav.poddar@ti.com>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>

7 years agommc: queue: add a second mmc queue request member
Per Forlin [Fri, 1 Jul 2011 16:55:31 +0000]
mmc: queue: add a second mmc queue request member

Add an additional mmc queue request instance to make way for two active
block requests. One request may be active while the other request is
being prepared.

Signed-off-by: Per Forlin <per.forlin@linaro.org>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Venkatraman S <svenkatr@ti.com>
Tested-by: Sourav Poddar <sourav.poddar@ti.com>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>

7 years agommc: block: move error path in issue_rw_rq to a separate function.
Per Forlin [Fri, 1 Jul 2011 16:55:30 +0000]
mmc: block: move error path in issue_rw_rq to a separate function.

Break out code without functional changes. This simplifies the code and
makes way for handling two parallel requests.

Signed-off-by: Per Forlin <per.forlin@linaro.org>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Venkatraman S <svenkatr@ti.com>
Tested-by: Sourav Poddar<sourav.poddar@ti.com>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>

7 years agommc: block: add a block request prepare function
Per Forlin [Fri, 1 Jul 2011 16:55:29 +0000]
mmc: block: add a block request prepare function

Break out code from mmc_blk_issue_rw_rq to create a block request prepare
function. This doesn't change any functionallity. This helps when handling
more than one active block request.

Signed-off-by: Per Forlin <per.forlin@linaro.org>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Venkatraman S <svenkatr@ti.com>
Tested-by: Sourav Poddar <sourav.poddar@ti.com>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>

7 years agommc: block: add member in mmc queue struct to hold request data
Per Forlin [Sat, 9 Jul 2011 21:12:36 +0000]
mmc: block: add member in mmc queue struct to hold request data

The way the request data is organized in the mmc queue struct, it only
allows processing of one request at a time.  This patch adds a new struct
to hold mmc queue request data such as sg list, request, blk request and
bounce buffers, and updates any functions depending on the mmc queue
struct. This prepares for using multiple active requests in one mmc queue.

Signed-off-by: Per Forlin <per.forlin@linaro.org>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Venkatraman S <svenkatr@ti.com>
Tested-by: Sourav Poddar <sourav.poddar@ti.com>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>

7 years agommc: mmc_test: test to measure how sg_len affect performance
Per Forlin [Fri, 1 Jul 2011 16:55:27 +0000]
mmc: mmc_test: test to measure how sg_len affect performance

Add a test that measures how the mmc bandwidth depends on the numbers of
sg elements in the sg list. The transfer size if fixed and sg length goes
from a few up to 512. The purpose is to measure overhead caused by
multiple sg elements.

Signed-off-by: Per Forlin <per.forlin@linaro.org>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Venkatraman S <svenkatr@ti.com>
Tested-by: Sourav Poddar <sourav.poddar@ti.com>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>

7 years agommc: mmc_test: add test for non-blocking transfers
Per Forlin [Fri, 1 Jul 2011 16:55:26 +0000]
mmc: mmc_test: add test for non-blocking transfers

Add four tests for read and write performance per
different transfer size, 4k to 4M.
 * Read using blocking mmc request
 * Read using non-blocking mmc request
 * Write using blocking mmc request
 * Write using non-blocking mmc request

The host driver must support pre_req() and post_req()
in order to run the non-blocking test cases.

Signed-off-by: Per Forlin <per.forlin@linaro.org>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Venkatraman S <svenkatr@ti.com>
Tested-by: Sourav Poddar<sourav.poddar@ti.com>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>

7 years agommc: mmc_test: add debugfs file to list all tests
Per Forlin [Fri, 1 Jul 2011 16:55:25 +0000]
mmc: mmc_test: add debugfs file to list all tests

Add a debugfs file "testlist" to print all available tests.

Signed-off-by: Per Forlin <per.forlin@linaro.org>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Venkatraman S <svenkatr@ti.com>
Tested-by: Sourav Poddar<sourav.poddar@ti.com>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>

7 years agommc: mmci: implement pre_req() and post_req()
Per Forlin [Fri, 1 Jul 2011 16:55:24 +0000]
mmc: mmci: implement pre_req() and post_req()

pre_req() runs dma_map_sg() and prepares the dma descriptor for the next
mmc data transfer. post_req() runs dma_unmap_sg.  If not calling pre_req()
before mmci_request(), mmci_request() will prepare the cache and dma just
like it did it before.  It is optional to use pre_req() and post_req()
for mmci.

Signed-off-by: Per Forlin <per.forlin@linaro.org>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>

7 years agommc: omap_hsmmc: add support for pre_req and post_req
Per Forlin [Fri, 1 Jul 2011 16:55:23 +0000]
mmc: omap_hsmmc: add support for pre_req and post_req

pre_req() runs dma_map_sg(), post_req() runs dma_unmap_sg.  If not calling
pre_req() before omap_hsmmc_request(), dma_map_sg will be issued before
starting the transfer.  It is optional to use pre_req().  If issuing
pre_req(), post_req() must be called as well.

Signed-off-by: Per Forlin <per.forlin@linaro.org>
Reviewed-by: Venkatraman S <svenkatr@ti.com>
Tested-by: Sourav Poddar <sourav.poddar@ti.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

7 years agommc: core: add non-blocking mmc request function
Per Forlin [Fri, 1 Jul 2011 16:55:22 +0000]
mmc: core: add non-blocking mmc request function

Previously there has only been one function mmc_wait_for_req()
to start and wait for a request. This patch adds:

 * mmc_start_req() - starts a request wihtout waiting
   If there is on ongoing request wait for completion
   of that request and start the new one and return.
   Does not wait for the new command to complete.

This patch also adds new function members in struct mmc_host_ops
only called from core.c:

 * pre_req - asks the host driver to prepare for the next job
 * post_req - asks the host driver to clean up after a completed job

The intention is to use pre_req() and post_req() to do cache maintenance
while a request is active. pre_req() can be called while a request is
active to minimize latency to start next job. post_req() can be used after
the next job is started to clean up the request. This will minimize the
host driver request end latency. post_req() is typically used before
ending the block request and handing over the buffer to the block layer.

Add a host-private member in mmc_data to be used by pre_req to mark the
data. The host driver will then check this mark to see if the data is
prepared or not.

Signed-off-by: Per Forlin <per.forlin@linaro.org>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Venkatraman S <svenkatr@ti.com>
Tested-by: Sourav Poddar <sourav.poddar@ti.com>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>

7 years agommc: MAINTAINERS: change omap_hsmmc maintainence to orphan
Madhusudhan Chikkature [Fri, 1 Jul 2011 17:36:42 +0000]
mmc: MAINTAINERS: change omap_hsmmc maintainence to orphan

Update the OMAP HSMMC entry from the MAINTAINERS file as I will
no longer be able to maintain this driver.

Signed-off-by: Madhusudhan Chikkature <madhu.cr@ti.com>
[khilman@ti.com: change to Orphan rather than complete removal]
Signed-off-by: Kevin Hilman <khilman@ti.com>
Acked-by: Venkatraman S <svenkatr@ti.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

7 years agommc: kconfig: remove EXPERIMENTAL from the DMA selection of atmel-mci
Nicolas Ferre [Wed, 29 Jun 2011 16:54:20 +0000]
mmc: kconfig: remove EXPERIMENTAL from the DMA selection of atmel-mci

This driver has been used for years with this option enabled.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

7 years agommc: atmel-mci: add suspend/resume support
Nicolas Ferre [Wed, 6 Jul 2011 09:31:36 +0000]
mmc: atmel-mci: add suspend/resume support

Take care of slots while going to suspend state.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

7 years agommc: sdhci-pci: allow 8-bit bus width for Intel Medfield eMMCs
Adrian Hunter [Wed, 29 Jun 2011 11:23:47 +0000]
mmc: sdhci-pci: allow 8-bit bus width for Intel Medfield eMMCs

Unless MMC_CAP_8_BIT_DATA is set, the bus width defaults to 4.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

7 years agommc: sdhci-pci: add 8-bit bus width support for mrst hc0
Major Lee [Wed, 29 Jun 2011 11:23:46 +0000]
mmc: sdhci-pci: add 8-bit bus width support for mrst hc0

And hook platform_8bit_width to support 8-bit bus width.

Signed-off-by: Major Lee <major_lee@wistron.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

7 years agommc: dw_mmc: reset FIFO after an error
James Hogan [Wed, 29 Jun 2011 08:30:47 +0000]
mmc: dw_mmc: reset FIFO after an error

If an error occurs mid way through a transaction (such as a missing CRC
status response after the 2nd block written out of 3), then the FIFO may
still contain data which will interfere with the next transaction.
Therefore after an error has been detected, reset the fifo using the
CTRL register.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Acked-by: Will Newton <will.newton@imgtec.com>
Tested-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

7 years agommc: dw_mmc: handle "no CRC status" error
James Hogan [Wed, 29 Jun 2011 08:29:58 +0000]
mmc: dw_mmc: handle "no CRC status" error

When a data write isn't acknowledged by the card (so no CRC status token
is detected after the data), the error -EIO is returned instead of the
-ETIMEDOUT expected by mmc_test 15 - "Correct xfer_size at write (start
failure)" and 17 "Correct xfer_size at write (midway failure)". In PIO
mode the reported number of bytes transferred is also exaggerated since
the last block actually failed.

Handle the "Write no CRC" error specially, setting the error to
-ETIMEDOUT and setting the bytes_xferred to 0.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Acked-by: Will Newton <will.newton@imgtec.com>
Tested-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

7 years agommc: dw_mmc: remove unnecessary error messages
James Hogan [Wed, 29 Jun 2011 08:29:17 +0000]
mmc: dw_mmc: remove unnecessary error messages

Remove error messages for timeout and CRC failure, since the error code
already indicates the problem.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Acked-by: Will Newton <will.newton@imgtec.com>
Tested-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

7 years agommc: dw_mmc: fix stop when fallen back to PIO
James Hogan [Wed, 29 Jun 2011 08:28:43 +0000]
mmc: dw_mmc: fix stop when fallen back to PIO

There are several situations when dw_mci_submit_data_dma() decides to
fall back to PIO mode instead of using DMA, due to a short (to avoid
overhead) or "complex" (e.g. with unaligned buffers) transaction, even
though host->use_dma is set. However dw_mci_stop_dma() decides whether
to stop DMA or set the EVENT_XFER_COMPLETE event based on host->use_dma.
When falling back to PIO mode this results in data timeout errors
getting missed and the driver locking up.

Therefore add host->using_dma to indicate whether the current
transaction is using dma or not, and adjust dw_mci_stop_dma() to use
that instead.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Acked-by: Will Newton <will.newton@imgtec.com>
Tested-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

7 years agommc: sdhci-s3c: Fix return value in sdhci_s3c_suspend/resume()
Wonil Choi [Wed, 29 Jun 2011 02:38:38 +0000]
mmc: sdhci-s3c: Fix return value in sdhci_s3c_suspend/resume()

Signed-off-by: Wonil Choi <wonil22.choi@samsung.com>
Signed-off-by: Minho Ban <mhban@samsung.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

7 years agommc: sdhci: specify maximum discard timeout
Adrian Hunter [Tue, 28 Jun 2011 14:16:03 +0000]
mmc: sdhci: specify maximum discard timeout

In general, SDHC hardware timeout cannot be avoided.
Accordingly, the maximum timeout is specified to limit
the maximum discard size.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

7 years agommc: queue: let host controllers specify maximum discard timeout
Adrian Hunter [Tue, 28 Jun 2011 14:16:02 +0000]
mmc: queue: let host controllers specify maximum discard timeout

Some host controllers will not operate without a hardware
timeout that is limited in value.  However large discards
require large timeouts, so there needs to be a way to
specify the maximum discard size.

A host controller driver may now specify the maximum discard
timeout possible so that max_discard_sectors can be calculated.

However, for eMMC when the High Capacity Erase Group Size
is not in use, the timeout calculation depends on clock
rate which may change.  For that case Preferred Erase Size
is used instead.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

7 years agommc: sdhci-esdhc-imx: remove "WP" from flag ESDHC_FLAG_GPIO_FOR_CD_WP
Shawn Guo [Tue, 21 Jun 2011 14:41:50 +0000]
mmc: sdhci-esdhc-imx: remove "WP" from flag ESDHC_FLAG_GPIO_FOR_CD_WP

The use of flag ESDHC_FLAG_GPIO_FOR_CD_WP is all CD related.  It does
not necessarily need to bother WP in the flag name.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>

7 years agommc: sdhci-esdhc-imx: SDHCI_CARD_PRESENT does not get cleared
Shawn Guo [Tue, 21 Jun 2011 14:41:49 +0000]
mmc: sdhci-esdhc-imx: SDHCI_CARD_PRESENT does not get cleared

The function esdhc_readl_le intends to clear bit SDHCI_CARD_PRESENT,
when the card detect gpio tells there is no card.  But it does not
clear the bit actually.  The patch gives a fix on that.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: <stable@kernel.org>
Signed-off-by: Chris Ball <cjb@laptop.org>

7 years agommc: sdhci: fix interrupt storm from card detection
Shawn Guo [Tue, 21 Jun 2011 14:41:48 +0000]
mmc: sdhci: fix interrupt storm from card detection

The issue was initially found by Eric Benard as below.

http://permalink.gmane.org/gmane.linux.ports.arm.kernel/108031

Not sure about other SDHCI based controller, but on Freescale eSDHC,
the SDHCI_INT_CARD_INSERT bits will be immediately set again when it
gets cleared, if a card is inserted. The driver need to mask the irq
to prevent interrupt storm which will freeze the system.  And the
SDHCI_INT_CARD_REMOVE gets the same situation.

The patch fixes the problem based on the initial idea from
Eric Benard.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Eric Benard <eric@eukrea.com>
Tested-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Chris Ball <cjb@laptop.org>

7 years agommc: tmio: Fix race condition resulting in spurious interrupts
Paul Parsons [Sun, 15 May 2011 13:24:41 +0000]
mmc: tmio: Fix race condition resulting in spurious interrupts

There is a race condition in the tmio_mmc_irq() interrupt handler,
caused by the presence of a while loop, which results in warnings of
spurious interrupts. This was found on an HP iPAQ hx4700 whose HTC
ASIC3 reportedly incorporates the Toshiba TC6380AF controller.

Towards the end of a multiple read (CMD18) operation the handler clears
the final RXRDY status bit in the first loop iteration, sees the DATAEND
status bit at the bottom of the loop, and so clears the DATAEND status
bit in the second loop iteration. However the DATAEND interrupt is still
queued in the system somewhere and can't be delivered until the handler
has returned. This second interrupt is then reported as spurious in the
next call to the handler. Likewise for single read (CMD17) operations.
And something similar occurs for multiple write (CMD25) and single write
(CMD24) operations, where CMDRESPEND and TXRQ status bits are cleared in
a single call.

In these cases the interrupt handler clears two separate interrupts when
it should only clear the one interrupt for which it was invoked. The fix
is to remove the while loop.

Signed-off-by: Paul Parsons <lost.distance@yahoo.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

7 years agommc: tmio: Fix build error without CONFIG_MMC_SDHI
Paul Parsons [Thu, 30 Jun 2011 15:50:12 +0000]
mmc: tmio: Fix build error without CONFIG_MMC_SDHI

Only compile tmio_mmc_dma.o when CONFIG_MMC_SDHI is selected (as y or m).

Signed-off-by: Paul Parsons <lost.distance@yahoo.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

7 years agommc: dw_mmc: handle unaligned buffers and sizes
James Hogan [Fri, 24 Jun 2011 12:57:56 +0000]
mmc: dw_mmc: handle unaligned buffers and sizes

Update functions for PIO pushing and pulling data to and from the FIFO
so that they can handle unaligned output buffers and unaligned buffer
lengths. This makes more of the tests in mmc_test pass.

Unaligned lengths in pulls are handled by reading the full FIFO item,
and storing the remaining bytes in a small internal buffer (part_buf).
The next data pull will copy data out of this buffer first before
accessing the FIFO again. Similarly, for pushes the final bytes that
don't fill a FIFO item are stored in the part_buf (or sent anyway if
it's the last transfer), and then the part_buf is included at the
beginning of the next buffer pushed.

Unaligned buffers in pulls are handled specially if the architecture
cannot do efficient unaligned accesses, by reading FIFO items into a
aligned local buffer, and memcpy'ing them into the output buffer, again
storing any remaining bytes in the internal buffer. Similarly for pushes
the buffer is memcpy'd into an aligned local buffer then written to the
FIFO.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Acked-by: Will Newton <will.newton@imgtec.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

7 years agommc: dw_mmc: don't hard code fifo depth, fix usage
James Hogan [Fri, 24 Jun 2011 12:57:18 +0000]
mmc: dw_mmc: don't hard code fifo depth, fix usage

The FIFO_DEPTH hardware configuration parameter can be found from the
power-on value of RX_WMark in the FIFOTH register. This is used to
initialise the watermarks, but when calculating the number of free fifo
spaces a preprocessor definition is used which is hard coded to 32.

Fix reading the value out of FIFOTH (the default value in the RX_WMark
field is FIFO_DEPTH-1 not FIFO_DEPTH). Allow the fifo depth to be
overriden by platform data (since a bootloader may have changed FIFOTH
making auto-detection unreliable). Store the fifo_depth for later use.
Also fix the calculation to find the number of free bytes in the fifo to
include the fifo depth in the left shift by the data shift, since the
fifo depth is measured in fifo items not bytes.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Acked-by: Will Newton <will.newton@imgtec.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

7 years agommc: dw_mmc: brackets in register access macros
James Hogan [Fri, 24 Jun 2011 12:56:38 +0000]
mmc: dw_mmc: brackets in register access macros

Add brackets around use of the dev argument to the
mci_{read,write}{w,l,q}() macros, for extra safety.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Acked-by: Will Newton <will.newton@imgtec.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

7 years agommc: dw_mmc: convert card tasklet to workqueue
James Hogan [Fri, 24 Jun 2011 12:55:55 +0000]
mmc: dw_mmc: convert card tasklet to workqueue

Convert the card insert/remove tasklet to a workqueue, and call the
setpower platform specific callback without the spinlock held. This
means neither of the setpower or get_cd callbacks are called from atomic
context which allows them to sleep.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Acked-by: Will Newton <will.newton@imgtec.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

7 years agommc: dw_mmc: fix race with request and removal
James Hogan [Fri, 24 Jun 2011 12:55:10 +0000]
mmc: dw_mmc: fix race with request and removal

When a request is made, the card presence is checked and the request is
queued. These two parts must be atomic with respect to card removal, or
a card removal could be handled in between, and the new request wouldn't
get cancelled until another card was inserted. Therefore move the
spinlock protection from dw_mci_queue_request() up into dw_mci_request()
to cover the presence check.

Note that the test_bit() used for the presence check isn't atomic
itself, so should have been protected by a spinlock anyway.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Acked-by: Will Newton <will.newton@imgtec.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

7 years agommc: dw_mmc: clear TXDR/RXDR ints before enabling
James Hogan [Fri, 24 Jun 2011 12:54:06 +0000]
mmc: dw_mmc: clear TXDR/RXDR ints before enabling

DMA is only used for transactions exceeding a certain length, otherwise
PIO is used. The TXDR and RXDR interrupts are masked when in DMA mode
but still fire. When switching to PIO mode (e.g. to get SCR field when
an SD card is inserted) these interrupts are not cleared and so they
trigger the ISR as soon as they are unmasked. If the previous DMA did a
write, then the ISR will handle the TXDR interrupt even if the
transaction is a read, completing the transaction without modifying the
read buffer.

This is fixed primarily by clearing these two interrupts before
unmasking them when setting up PIO mode, and also by making the ISR more
robust by only handling TXDR/RXDR in the correct read/write direction.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Acked-by: Will Newton <will.newton@imgtec.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

7 years agommc: sdhi: Add write16_hook
Simon Horman [Mon, 20 Jun 2011 23:00:10 +0000]
mmc: sdhi: Add write16_hook

Some controllers require waiting for the bus to become idle
before writing to some registers. I have implemented this
by adding a hook to sd_ctrl_write16() and implementing
a hook for SDHI which waits for the bus to become idle.

Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Cc: Magnus Damm <magnus.damm@gmail.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Chris Ball <cjb@laptop.org>

7 years agommc: tmio: Share register access functions
Simon Horman [Mon, 20 Jun 2011 23:00:09 +0000]
mmc: tmio: Share register access functions

Move register access functions into a shared header.
Use sd_ctrl_write16 in tmio_mmc_dma.c:tmio_mmc_enable_dma().

Other than avoiding (trivial) open-coding, the motivation for
this is to allow platform-hooks in access functions to
be applied across all applicable accesses.

Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Cc: Magnus Damm <magnus.damm@gmail.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Chris Ball <cjb@laptop.org>

7 years agommc: tmio: name 0xd8 as CTL_DMA_ENABLE
Simon Horman [Mon, 20 Jun 2011 23:00:08 +0000]
mmc: tmio: name 0xd8 as CTL_DMA_ENABLE

This reflects at least the current usage of this register
and I think it improves the readability of the code ever so slightly.

Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Cc: Magnus Damm <magnus.damm@gmail.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Chris Ball <cjb@laptop.org>

7 years agommc: block: add checking of r/w command response
Russell King - ARM Linux [Mon, 20 Jun 2011 19:10:49 +0000]
mmc: block: add checking of r/w command response

Check the status bits in the r/w command response for any errors.
If error bits are set, then we won't have seen any data transferred,
so it's pointless doing any further checking.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

7 years agommc: block: improve error recovery from command channel errors
Russell King - ARM Linux [Mon, 20 Jun 2011 19:10:28 +0000]
mmc: block: improve error recovery from command channel errors

Command channel errors fall into four classes:

1. The command was issued with the card in the wrong state
2. The command failed to be received by the card correctly
3. The cards response failed to be received by the host (CRC error)
4. The card failed to respond to the card

For (1), in theory we should know that the card is in the correct state.
However, a failed stop command (or other failure) may result in the card
remaining in a data transfer state from the previous command.  If we
detect this condition, we try to recover by sending a stop command.

For the initial commands (set block count and the read/write command)
no data will have been transferred.  All that we need deal with is
retrying at this point.  A failed stop command can be remedied as
above.

If we are unable to recover the card (eg, the card ignores our requests
for status, or we don't recognise the error code) then we immediately
fail the request.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

7 years agommc: block: allow get_card_status() to return error status
Russell King - ARM Linux [Mon, 20 Jun 2011 19:10:08 +0000]
mmc: block: allow get_card_status() to return error status

If the MMC_SEND_STATUS command is not successful, we should not return
a zero status word, but instead allow the caller to know positively
that an error occurred.

Convert the open-coded get_card_status() to use the helper function,
and provide definitions for the card state field.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

7 years agommc: dw_mmc: protect a sequence of request and request-done.
Seungwon Jeon [Mon, 20 Jun 2011 08:24:16 +0000]
mmc: dw_mmc: protect a sequence of request and request-done.

Response timeout (RTO), Response crc error (RCRC) and Response error (RE)
signals come with command done (CD) and can be raised preceding command
done (CD). That is these error interrupts and CD can be handled in
separate dw_mci_interrupt(). If mmc_request_done() is called because of
a response timeout before command done has occured, we might send the
next request before the CD of current request is finished. This can
bring about a broken sequence of request and request-done.

And Data error interrupt (DRTO, DCRC, SBE, EBE) and data transfer
over (DTO) have the same problem.

Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com>
Acked-by: Will Newton <will.newton@imgtec.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

7 years agommc: dw_mmc: set the card_width bit per card.
Seungwon Jeon [Mon, 20 Jun 2011 08:23:53 +0000]
mmc: dw_mmc: set the card_width bit per card.

This patch sets the card_width bit of CTYPE for the corresponding card.

CTYPE[31] and CTYPE[16] correspond respectively to card[15] and card[0]
for 8-bit mode. And CTYPE[15] and CTYPE[0] correspond respectively to
card[15] and CTYPE[0] for 1-bit or 4-bit mode.

Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com>
Acked-by: Will Newton <will.newton@imgtec.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

7 years agoARM: mmp2: update mmp2_defconfig to support mmc
Zhangfei Gao [Wed, 8 Jun 2011 09:42:01 +0000]
ARM: mmp2: update mmp2_defconfig to support mmc

1. support brownstone
2. support mmc
3. support basic filesystem and language
4. remove dynamic_debug, since too many log during access sd

Signed-off-by: Zhangfei Gao <zhangfei.gao@marvell.com>
Acked-by: Philip Rakity <prakity@marvell.com>
Acked-by: Mark F. Brown <mark.brown314@gmail.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

7 years agommc: sdhci-pxa: move platform data to include/linux/platform_data
Zhangfei Gao [Mon, 20 Jun 2011 14:11:52 +0000]
mmc: sdhci-pxa: move platform data to include/linux/platform_data

As suggested by Arnd, move platform data to include/linux/platform_data
in order to improve build coverage for the driver.

Signed-off-by: Zhangfei Gao <zhangfei.gao@marvell.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Chris Ball <cjb@laptop.org>