7 years agomm: Hold a file reference in madvise_remove
Andy Lutomirski [Thu, 5 Jul 2012 23:00:11 +0000]
mm: Hold a file reference in madvise_remove

commit 9ab4233dd08036fe34a89c7dc6f47a8bf2eb29eb upstream.

Otherwise the code races with munmap (causing a use-after-free
of the vma) or with close (causing a use-after-free of the struct
file).

The bug was introduced by commit 90ed52ebe481 ("[PATCH] holepunch: fix
mmap_sem i_mutex deadlock")

Cc: Hugh Dickins <hugh@veritas.com>
Cc: Miklos Szeredi <mszeredi@suse.cz>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[bwh: Backported to 3.2:
 - Adjust context
 - madvise_remove() calls vmtruncate_range(), not do_fallocate()]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agodrm/i915: rip out the PM_IIR WARN
Daniel Vetter [Thu, 21 Jun 2012 12:55:22 +0000]
drm/i915: rip out the PM_IIR WARN

commit 58bf8062d0b293b8e1028e5b0342082002886bd4 upstream.

After banging my head against this for the past few months, I still
don't see how this could possible race under the premise that once an
irq bit is masked in PM_IMR and reset in PM_IIR it won't show up again
until we unmask it in PM_IMR.

Still, we have reports of this being seen in the wild. Now Bspec has
this little bit of lovely language in the PMIIR register:

Public SNB Docs, Vol3Part2, 2.5.14 "PMIIR":

"For each bit, the IIR can store a second pending interrupt if two or
more of the same interrupt conditions occur before the first condition
is cleared. Upon clearing the interrupt, the IIR bit will momentarily
go low, then return high to indicate there is another interrupt
pending."

Now if we presume that PMIMR only prevent new interrupts from being
queued, we could easily end up masking an interrupt and clearing it,
but the 2nd pending interrupt setting the bit in PMIIR right away
again. Which leads, the next time the irq handler runs, to hitting the
WARN.

Also, no bad side effects of this have ever been reported. And we've
tracked down our issues with the gpu turbo getting stuck to bogus
interrupt generation limits in th RPLIMIT register.

So let's just rip out this WARN as bogus and call it a day. The only
shallow thing here is that this 2-deep irq queue in the hw makes you
wonder how racy the windows irq handler is ...

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42907
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agodrm/i915: Refactor the deferred PM_IIR handling into a single function
Chris Wilson [Sun, 15 Apr 2012 10:56:03 +0000]
drm/i915: Refactor the deferred PM_IIR handling into a single function

commit fc6826d1dcd65f3d1e9a5377678882e4e08f02be upstream.

This function, along with the registers and deferred work hander, are
all shared with SandyBridge, IvyBridge and their variants. So remove the
duplicate code into a single function.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[bwh: Backported to 3.2: adjust context; drop changes for Valley View]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agosplice: fix racy pipe->buffers uses
Eric Dumazet [Tue, 12 Jun 2012 13:24:40 +0000]
splice: fix racy pipe->buffers uses

commit 047fe3605235888f3ebcda0c728cb31937eadfe6 upstream.

Dave Jones reported a kernel BUG at mm/slub.c:3474! triggered
by splice_shrink_spd() called from vmsplice_to_pipe()

commit 35f3d14dbbc5 (pipe: add support for shrinking and growing pipes)
added capability to adjust pipe->buffers.

Problem is some paths don't hold pipe mutex and assume pipe->buffers
doesn't change for their duration.

Fix this by adding nr_pages_max field in struct splice_pipe_desc, and
use it in place of pipe->buffers where appropriate.

splice_shrink_spd() loses its struct pipe_inode_info argument.

Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Tom Herbert <therbert@google.com>
Tested-by: Dave Jones <davej@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
[bwh: Backported to 3.2:
 - Adjust context in vmsplice_to_pipe()
 - Update one more call to splice_shrink_spd(), from skb_splice_bits()]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agonet/wireless: ipw2x00: add supported cipher suites to wiphy initialization
Stanislav Yakovlev [Wed, 11 Apr 2012 01:44:47 +0000]
net/wireless: ipw2x00: add supported cipher suites to wiphy initialization

commit a141e6a0097118bb35024485f1faffc0d9042f5c upstream.

Driver doesn't report its supported cipher suites through cfg80211
interface. It still uses wext interface and probably will not work
through nl80211, but will at least correctly advertise supported
features.

Bug was reported by Omar Siam.
https://bugzilla.kernel.org/show_bug.cgi?id=43049

Signed-off-by: Stanislav Yakovlev <stas.yakovlev@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Cc: Josh Boyer <jwboyer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agomacvtap: zerocopy: validate vectors before building skb
Jason Wang [Wed, 2 May 2012 03:42:15 +0000]
macvtap: zerocopy: validate vectors before building skb

commit b92946e2919134ebe2a4083e4302236295ea2a73 upstream.

There're several reasons that the vectors need to be validated:

- Return error when caller provides vectors whose num is greater than UIO_MAXIOV.
- Linearize part of skb when userspace provides vectors grater than MAX_SKB_FRAGS.
- Return error when userspace provides vectors whose total length may exceed
- MAX_SKB_FRAGS * PAGE_SIZE.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Josh Boyer <jwboyer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agortl8187: ->brightness_set can not sleep
Stanislaw Gruszka [Wed, 16 May 2012 09:06:21 +0000]
rtl8187: ->brightness_set can not sleep

commit 0fde0a8cfd0ede7f310d6a681c8e5a7cb3e32406 upstream.

Fix:

BUG: sleeping function called from invalid context at kernel/workqueue.c:2547
in_atomic(): 1, irqs_disabled(): 0, pid: 629, name: wpa_supplicant
2 locks held by wpa_supplicant/629:
 #0:  (rtnl_mutex){+.+.+.}, at: [<c08b2b84>] rtnl_lock+0x14/0x20
 #1:  (&trigger->leddev_list_lock){.+.?..}, at: [<c0867f41>] led_trigger_event+0x21/0x80
Pid: 629, comm: wpa_supplicant Not tainted 3.3.0-0.rc3.git5.1.fc17.i686
Call Trace:
 [<c046a9f6>] __might_sleep+0x126/0x1d0
 [<c0457d6c>] wait_on_work+0x2c/0x1d0
 [<c045a09a>] __cancel_work_timer+0x6a/0x120
 [<c045a160>] cancel_delayed_work_sync+0x10/0x20
 [<f7dd3c22>] rtl8187_led_brightness_set+0x82/0xf0 [rtl8187]
 [<c0867f7c>] led_trigger_event+0x5c/0x80
 [<f7ff5e6d>] ieee80211_led_radio+0x1d/0x40 [mac80211]
 [<f7ff3583>] ieee80211_stop_device+0x13/0x230 [mac80211]

Removing _sync is ok, because if led_on work is currently running
it will be finished before led_off work start to perform, since
they are always queued on the same mac80211 local->workqueue.

Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=795176

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Acked-by: Hin-Tak Leung <htl10@users.sourceforge.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Cc: Josh Boyer <jwboyer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agothp: avoid atomic64_read in pmd_read_atomic for 32bit PAE
Andrea Arcangeli [Wed, 20 Jun 2012 19:52:57 +0000]
thp: avoid atomic64_read in pmd_read_atomic for 32bit PAE

commit e4eed03fd06578571c01d4f1478c874bb432c815 upstream.

In the x86 32bit PAE CONFIG_TRANSPARENT_HUGEPAGE=y case while holding the
mmap_sem for reading, cmpxchg8b cannot be used to read pmd contents under
Xen.

So instead of dealing only with "consistent" pmdvals in
pmd_none_or_trans_huge_or_clear_bad() (which would be conceptually
simpler) we let pmd_none_or_trans_huge_or_clear_bad() deal with pmdvals
where the low 32bit and high 32bit could be inconsistent (to avoid having
to use cmpxchg8b).

The only guarantee we get from pmd_read_atomic is that if the low part of
the pmd was found null, the high part will be null too (so the pmd will be
considered unstable).  And if the low part of the pmd is found "stable"
later, then it means the whole pmd was read atomically (because after a
pmd is stable, neither MADV_DONTNEED nor page faults can alter it anymore,
and we read the high part after the low part).

In the 32bit PAE x86 case, it is enough to read the low part of the pmdval
atomically to declare the pmd as "stable" and that's true for THP and no
THP, furthermore in the THP case we also have a barrier() that will
prevent any inconsistent pmdvals to be cached by a later re-read of the
*pmd.

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Jonathan Nieder <jrnieder@gmail.com>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Larry Woodman <lwoodman@redhat.com>
Cc: Petr Matousek <pmatouse@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Jan Beulich <jbeulich@suse.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Tested-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agomm: pmd_read_atomic: fix 32bit PAE pmd walk vs pmd_populate SMP race condition
Andrea Arcangeli [Tue, 29 May 2012 22:06:49 +0000]
mm: pmd_read_atomic: fix 32bit PAE pmd walk vs pmd_populate SMP race condition

commit 26c191788f18129af0eb32a358cdaea0c7479626 upstream.

When holding the mmap_sem for reading, pmd_offset_map_lock should only
run on a pmd_t that has been read atomically from the pmdp pointer,
otherwise we may read only half of it leading to this crash.

PID: 11679  TASK: f06e8000  CPU: 3   COMMAND: "do_race_2_panic"
 #0 [f06a9dd8] crash_kexec at c049b5ec
 #1 [f06a9e2c] oops_end at c083d1c2
 #2 [f06a9e40] no_context at c0433ded
 #3 [f06a9e64] bad_area_nosemaphore at c043401a
 #4 [f06a9e6c] __do_page_fault at c0434493
 #5 [f06a9eec] do_page_fault at c083eb45
 #6 [f06a9f04] error_code (via page_fault) at c083c5d5
    EAX: 01fb470c EBX: fff35000 ECX: 00000003 EDX: 00000100 EBP:
    00000000
    DS:  007b     ESI: 9e201000 ES:  007b     EDI: 01fb4700 GS:  00e0
    CS:  0060     EIP: c083bc14 ERR: ffffffff EFLAGS: 00010246
 #7 [f06a9f38] _spin_lock at c083bc14
 #8 [f06a9f44] sys_mincore at c0507b7d
 #9 [f06a9fb0] system_call at c083becd
                         start           len
    EAX: ffffffda  EBX: 9e200000  ECX: 00001000  EDX: 6228537f
    DS:  007b      ESI: 00000000  ES:  007b      EDI: 003d0f00
    SS:  007b      ESP: 62285354  EBP: 62285388  GS:  0033
    CS:  0073      EIP: 00291416  ERR: 000000da  EFLAGS: 00000286

This should be a longstanding bug affecting x86 32bit PAE without THP.
Only archs with 64bit large pmd_t and 32bit unsigned long should be
affected.

With THP enabled the barrier() in pmd_none_or_trans_huge_or_clear_bad()
would partly hide the bug when the pmd transition from none to stable,
by forcing a re-read of the *pmd in pmd_offset_map_lock, but when THP is
enabled a new set of problem arises by the fact could then transition
freely in any of the none, pmd_trans_huge or pmd_trans_stable states.
So making the barrier in pmd_none_or_trans_huge_or_clear_bad()
unconditional isn't good idea and it would be a flakey solution.

This should be fully fixed by introducing a pmd_read_atomic that reads
the pmd in order with THP disabled, or by reading the pmd atomically
with cmpxchg8b with THP enabled.

Luckily this new race condition only triggers in the places that must
already be covered by pmd_none_or_trans_huge_or_clear_bad() so the fix
is localized there but this bug is not related to THP.

NOTE: this can trigger on x86 32bit systems with PAE enabled with more
than 4G of ram, otherwise the high part of the pmd will never risk to be
truncated because it would be zero at all times, in turn so hiding the
SMP race.

This bug was discovered and fully debugged by Ulrich, quote:

----
[..]
pmd_none_or_trans_huge_or_clear_bad() loads the content of edx and
eax.

    496 static inline int pmd_none_or_trans_huge_or_clear_bad(pmd_t
    *pmd)
    497 {
    498         /* depend on compiler for an atomic pmd read */
    499         pmd_t pmdval = *pmd;

                                // edi = pmd pointer
0xc0507a74 <sys_mincore+548>:   mov    0x8(%esp),%edi
...
                                // edx = PTE page table high address
0xc0507a84 <sys_mincore+564>:   mov    0x4(%edi),%edx
...
                                // eax = PTE page table low address
0xc0507a8e <sys_mincore+574>:   mov    (%edi),%eax

[..]

Please note that the PMD is not read atomically. These are two "mov"
instructions where the high order bits of the PMD entry are fetched
first. Hence, the above machine code is prone to the following race.

-  The PMD entry {high|low} is 0x0000000000000000.
   The "mov" at 0xc0507a84 loads 0x00000000 into edx.

-  A page fault (on another CPU) sneaks in between the two "mov"
   instructions and instantiates the PMD.

-  The PMD entry {high|low} is now 0x00000003fda38067.
   The "mov" at 0xc0507a8e loads 0xfda38067 into eax.
----

Reported-by: Ulrich Obergfell <uobergfe@redhat.com>
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Larry Woodman <lwoodman@redhat.com>
Cc: Petr Matousek <pmatouse@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoath9k: fix panic caused by returning a descriptor we have queued for reuse
Tom Hughes [Wed, 27 Jun 2012 17:21:15 +0000]
ath9k: fix panic caused by returning a descriptor we have queued for reuse

commit 6bb51c70cabaadddc54a6454844eceba91a56083 upstream.

Commit 3a2923e83c introduced a bug when a corrupt descriptor
is encountered - although the following descriptor is discarded
and returned to the queue for reuse the associated frame is
also returned for processing. This leads to a panic:

BUG: unable to handle kernel NULL pointer dereference at 000000000000003a
IP: [<ffffffffa02599a5>] ath_rx_tasklet+0x165/0x1b00 [ath9k]
Call Trace:
<IRQ>
[<ffffffff812d7fa0>] ? map_single+0x60/0x60
[<ffffffffa028f044>] ? ath9k_ioread32+0x34/0x90 [ath9k]
[<ffffffffa0292eec>] athk9k_tasklet+0xdc/0x160 [ath9k]
[<ffffffff8105e133>] tasklet_action+0x63/0xd0
[<ffffffff8105dbc0>] __do_softirq+0xc0/0x1e0
[<ffffffff8101a873>] ? native_sched_clock+0x13/0x80
[<ffffffff815f9d5c>] call_softirq+0x1c/0x30
[<ffffffff810151f5>] do_softirq+0x75/0xb0
[<ffffffff8105df95>] irq_exit+0xb5/0xc0
[<ffffffff815fa5b3>] do_IRQ+0x63/0xe0
[<ffffffff815f0cea>] common_interrupt+0x6a/0x6a
<EOI>
[<ffffffff8131840a>] ? intel_idle+0xea/0x150
[<ffffffff813183eb>] ? intel_idle+0xcb/0x150
[<ffffffff814a1db9>] cpuidle_enter+0x19/0x20
[<ffffffff814a23d9>] cpuidle_idle_call+0xa9/0x240
[<ffffffff8101c4bf>] cpu_idle+0xaf/0x120
[<ffffffff815cda8e>] rest_init+0x72/0x74
[<ffffffff81cf4c1a>] start_kernel+0x3b7/0x3c4
[<ffffffff81cf4662>] ? repair_env_string+0x5e/0x5e
[<ffffffff81cf4346>] x86_64_start_reservations+0x131/0x135
[<ffffffff81cf444a>] x86_64_start_kernel+0x100/0x10f

Making sure bf is cleared to NULL in this case restores the
old behaviour.

Signed-off-by: Tom Hughes <tom@compton.nu>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Cc: Josh Boyer <jwboyer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agotg3: Apply short DMA frag workaround to 5906
Matt Carlson [Thu, 7 Jun 2012 12:56:54 +0000]
tg3: Apply short DMA frag workaround to 5906

commit b7abee6ef888117f92db370620ebf116a38e3f4d upstream.

5906 devices also need the short DMA fragment workaround.  This patch
makes the necessary change.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Tested-by: Christian Kujau <lists@nerdbynature.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Josh Boyer <jwboyer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoraid5: delayed stripe fix
Shaohua Li [Tue, 3 Jul 2012 05:57:19 +0000]
raid5: delayed stripe fix

commit fab363b5ff502d1b39ddcfec04271f5858d9f26e upstream.

There isn't locking setting STRIPE_DELAYED and STRIPE_PREREAD_ACTIVE bits, but
the two bits have relationship. A delayed stripe can be moved to hold list only
when preread active stripe count is below IO_THRESHOLD. If a stripe has both
the bits set, such stripe will be in delayed list and preread count not 0,
which will make such stripe never leave delayed list.

Signed-off-by: Shaohua Li <shli@fusionio.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agogspca-core: Fix buffers staying in queued state after a stream_off
Hans de Goede [Thu, 5 Jul 2012 08:23:17 +0000]
gspca-core: Fix buffers staying in queued state after a stream_off

commit af05ef01e9cde84620c6855a8d8ab9c8a1db9009 upstream.

[Backport to linux-stable by Antonio Ospite <ospite@studenti.unina.it>]

This fixes a regression introduced by commit f7059ea and should be
backported to all supported stable kernels which have this commit.

Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agomwifiex: fix wrong return values in add_virtual_intf() error cases
Bing Zhao [Wed, 4 Jul 2012 03:43:56 +0000]
mwifiex: fix wrong return values in add_virtual_intf() error cases

commit 858faa57dd9e2b91f3f870fbb1185982e42f5a2b upstream

add_virtual_intf() needs to return an ERR_PTR(), instead of NULL,
on errors, otherwise cfg80211 will crash.

Reported-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agotracing: change CPU ring buffer state from tracing_cpumask
Vaibhav Nagarnaik [Fri, 4 May 2012 01:59:52 +0000]
tracing: change CPU ring buffer state from tracing_cpumask

commit 71babb2705e2203a64c27ede13ae3508a0d2c16c upstream.

According to Documentation/trace/ftrace.txt:

tracing_cpumask:

        This is a mask that lets the user only trace
        on specified CPUS. The format is a hex string
        representing the CPUS.

The tracing_cpumask currently doesn't affect the tracing state of
per-CPU ring buffers.

This patch enables/disables CPU recording as its corresponding bit in
tracing_cpumask is set/unset.

Link: http://lkml.kernel.org/r/1336096792-25373-3-git-send-email-vnagarnaik@google.com

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Laurent Chavey <chavey@google.com>
Cc: Justin Teravest <teravest@google.com>
Cc: David Sharp <dhsharp@google.com>
Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoiwlwifi: remove log_event debugfs file debugging is disabled
Johannes Berg [Wed, 20 Jun 2012 06:46:25 +0000]
iwlwifi: remove log_event debugfs file debugging is disabled

commit 882b7b7d11d65e8eccce738f1ce97cdfdb998f9f upstream.

When debugging is disabled, the event log functions aren't
functional in the way that the debugfs file expects. This
leads to the debugfs access crashing. Since the event log
functions aren't functional then, remove the debugfs file
when CONFIG_IWLWIFI_DEBUG is not set.

Reported-by: Lekensteyn <lekensteyn@gmail.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
[bwh: Backported to 3.2: adjust filename, context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agomac80211: fix queues stuck issue with HT bandwidth change
Johannes Berg [Wed, 27 Jun 2012 16:11:56 +0000]
mac80211: fix queues stuck issue with HT bandwidth change

No upstream commit, the buggy code was removed in 3.5 in commit
7213cf2cb0dfbb4d6b55a1da000d34338f76c0e3 and others.

Rajkumar changed code for handling channel switching in
mac80211 to stop the queues in

  commit 7cc44ed48d0ec0937c1f098642540b6c9ca38de5
  Author: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
  Date:   Fri Sep 16 15:32:34 2011 +0530

      mac80211: Fix regression on queue stop during 2040 bss change

which went into 3.2. In the 3.4 cycle, Paul's change

  commit 3117bbdb7899d43927c8ce4fe885ab7c1231c121
  Author: Paul Stewart <pstew@chromium.org>
  Date:   Tue Mar 13 07:46:18 2012 -0700

      mac80211: Don't let regulatory make us deaf

went in and changed the TX/RX enable logic, but now
the conditions for stopping and restarting the queues
were different so that now, if the AP changes between
20/40 MHz bandwidth, it can happen that we stop but
never restart the queues. This breaks the connection
and the module actually has to be reloaded to get it
back to work.

Fix this by making sure the queues are always started
when they were stopped.

Reported-by: Florian Manschwetus <manschwetus@googlemail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoNFS: hard-code init_net for NFS callback transports
Stanislav Kinsbursky [Mon, 25 Jun 2012 20:40:10 +0000]
NFS: hard-code init_net for NFS callback transports

upstream commit 12918b10d59e975fd5241eef03ef9e6d5ea3dcfe.

In case of destroying mount namespace on child reaper exit, nsproxy is zeroed
to the point already. So, dereferencing of it is invalid.
This patch hard-code "init_net" for all network namespace references for NFS
callback services. This will be fixed with proper NFS callback
containerization.

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoSUNRPC: move per-net operations from svc_destroy()
Stanislav Kinsbursky [Mon, 25 Jun 2012 20:40:09 +0000]
SUNRPC: move per-net operations from svc_destroy()

upstream commit 786185b5f8abefa6a8a16695bb4a59c164d5a071.

The idea is to separate service destruction and per-net operations,
because these are two different things and the mix looks ugly.

Notes:

1) For NFS server this patch looks ugly (sorry for that). But these
place will be rewritten soon during NFSd containerization.

2) LockD per-net counter increase int lockd_up() was moved prior to
make_socks() to make lockd_down_net() call safe in case of error.

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoSUNRPC: new svc_bind() routine introduced
Stanislav Kinsbursky [Mon, 25 Jun 2012 20:40:08 +0000]
SUNRPC: new svc_bind() routine introduced

upstream commit 9793f7c88937e7ac07305ab1af1a519225836823.

This new routine is responsible for service registration in a specified
network context.

The idea is to separate service creation from per-net operations.

Note also: since registering service with svc_bind() can fail, the
service will be destroyed and during destruction it will try to
unregister itself from rpcbind. In this case unregistration has to be
skipped.

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoLockd: pass network namespace to creation and destruction routines
Stanislav Kinsbursky [Mon, 25 Jun 2012 20:40:07 +0000]
Lockd: pass network namespace to creation and destruction routines

upstream commit e3f70eadb7dddfb5a2bb9afff7abfc6ee17a29d0.

v2: dereference of most probably already released nlm_host removed in
nlmclnt_done() and reclaimer().

These routines are called from locks reclaimer() kernel thread. This thread
works in "init_net" network context and currently relays on persence on lockd
thread and it's per-net resources. Thus lockd_up() and lockd_down() can't relay
on current network context. So let's pass corrent one into them.

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoipheth: add support for iPad
Davide Gerhard [Mon, 25 Jun 2012 07:04:47 +0000]
ipheth: add support for iPad

commit 6de0298ec9c1edaf330b71b57346241ece8f3346 upstream.

This adds support for the iPad to the ipheth driver.
(product id = 0x129a)

Signed-off-by: Davide Gerhard <rainbow@irh.it>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoPCI: EHCI: fix crash during suspend on ASUS computers
Alan Stern [Mon, 9 Jul 2012 15:09:21 +0000]
PCI: EHCI: fix crash during suspend on ASUS computers

commit dbf0e4c7257f8d684ec1a3c919853464293de66e upstream.

Quite a few ASUS computers experience a nasty problem, related to the
EHCI controllers, when going into system suspend.  It was observed
that the problem didn't occur if the controllers were not put into the
D3 power state before starting the suspend, and commit
151b61284776be2d6f02d48c23c3625678960b97 (USB: EHCI: fix crash during
suspend on ASUS computers) was created to do this.

It turned out this approach messed up other computers that didn't have
the problem -- it prevented USB wakeup from working.  Consequently
commit c2fb8a3fa25513de8fedb38509b1f15a5bbee47b (USB: add
NO_D3_DURING_SLEEP flag and revert 151b61284776be2) was merged; it
reverted the earlier commit and added a whitelist of known good board
names.

Now we know the actual cause of the problem.  Thanks to AceLan Kao for
tracking it down.

According to him, an engineer at ASUS explained that some of their
BIOSes contain a bug that was added in an attempt to work around a
problem in early versions of Windows.  When the computer goes into S3
suspend, the BIOS tries to verify that the EHCI controllers were first
quiesced by the OS.  Nothing's wrong with this, but the BIOS does it
by checking that the PCI COMMAND registers contain 0 without checking
the controllers' power state.  If the register isn't 0, the BIOS
assumes the controller needs to be quiesced and tries to do so.  This
involves making various MMIO accesses to the controller, which don't
work very well if the controller is already in D3.  The end result is
a system hang or memory corruption.

Since the value in the PCI COMMAND register doesn't matter once the
controller has been suspended, and since the value will be restored
anyway when the controller is resumed, we can work around the BIOS bug
simply by setting the register to 0 during system suspend.  This patch
(as1590) does so and also reverts the second commit mentioned above,
which is now unnecessary.

In theory we could do this for every PCI device.  However to avoid
introducing new problems, the patch restricts itself to EHCI host
controllers.

Finally the affected systems can suspend with USB wakeup working
properly.

Reference: https://bugzilla.kernel.org/show_bug.cgi?id=37632
Reference: https://bugzilla.kernel.org/show_bug.cgi?id=42728
Based-on-patch-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Dâniel Fraga <fragabr@gmail.com>
Tested-by: Javier Marcet <jmarcet@gmail.com>
Tested-by: Andrey Rahmatullin <wrar@wrar.name>
Tested-by: Oleksij Rempel <bug-track@fisher-privat.net>
Tested-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoxhci: Fix hang on back-to-back Set TR Deq Ptr commands.
Sarah Sharp [Thu, 21 Jun 2012 23:28:30 +0000]
xhci: Fix hang on back-to-back Set TR Deq Ptr commands.

commit 0d9f78a92ef5e97d9fe51d9215ebe22f6f0d289d upstream.

The Microsoft LifeChat 3000 USB headset was causing a very reproducible
hang whenever it was plugged in.  At first, I thought the host
controller was producing bad transfer events, because the log was filled
with errors like:

xhci_hcd 0000:00:14.0: ERROR Transfer event TRB DMA ptr not part of current TD

However, it turned out to be an xHCI driver bug in the ring expansion
patches.  The bug is triggered When there are two ring segments, and a
TD that ends just before a link TRB, like so:

 ______________                     _____________
|              |              ---> | setup TRB B |
 ______________               |     _____________
|              |              |    |  data TRB B |
 ______________               |     _____________
| setup TRB A  | <-- deq      |    |  data TRB B |
 ______________               |     _____________
| data TRB A   |              |    |             | <-- enq, deq''
 ______________               |     _____________
| status TRB A |              |    |             |
 ______________               |     _____________
|  link TRB    |---------------    |  link TRB   |
 _____________  <--- deq'           _____________

TD A (the first control transfer) stalls on the data phase.  That halts
the ring.  The xHCI driver moves the hardware dequeue pointer to the
first TRB after the stalled transfer, which happens to be the link TRB.

Once the Set TR dequeue pointer command completes, the function
update_ring_for_set_deq_completion runs.  That function is supposed to
update the xHCI driver's dequeue pointer to match the internal hardware
dequeue pointer.  On the first call this would work fine, and the
software dequeue pointer would move to deq'.

However, if the transfer immediately after that stalled (TD B in this
case), another Set TR Dequeue command would be issued.  That would move
the hardware dequeue pointer to deq''.  Once that command completed,
update_ring_for_set_deq_completion would run again.

The original code would unconditionally increment the software dequeue
pointer, which moved the pointer off the ring segment into la-la-land.
The while loop would happy increment the dequeue pointer (possibly
wrapping it) until it matched the hardware pointer value.

The while loop would also access all the memory in between the first
ring segment and the second ring segment to determine if it was a link
TRB.  This could cause general protection faults, although it was
unlikely because the ring segments came from a DMA pool, and would often
have consecutive memory addresses.

If nothing in that space looked like a link TRB, the deq_seg pointer for
the ring would remain on the first segment.  Thus, the deq_seg and the
software dequeue pointer would get out of sync.

When the next transfer event came in after the stalled transfer, the
xHCI driver code would attempt to convert the software dequeue pointer
into a DMA address in order to compare the DMA address for the completed
transfer.  Since the deq_seg and the dequeue pointer were out of sync,
xhci_trb_virt_to_dma would return NULL.

The transfer event would get ignored, the transfer would eventually
timeout, and we would mistakenly convert the finished transfer to no-op
TRBs.  Some kernel driver (maybe xHCI?) would then get stuck in an
infinite loop in interrupt context, and the whole machine would hang.

This patch should be backported to kernels as old as 3.4, that contain
the commit b008df60c6369ba0290fa7daa177375407a12e07 "xHCI: count free
TRBs on transfer ring"

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: Andiry Xu <andiry.xu@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agousb: Add support for root hub port status CAS
Stanislaw Ledwon [Mon, 18 Jun 2012 13:20:00 +0000]
usb: Add support for root hub port status CAS

commit 8bea2bd37df08aaa599aa361a9f8b836ba98e554 upstream.

The host controller port status register supports CAS (Cold Attach
Status) bit. This bit could be set when USB3.0 device is connected
when system is in Sx state. When the system wakes to S0 this port
status with CAS bit is reported and this port can't be used by any
device.

When CAS bit is set the port should be reset by warm reset. This
was not supported by xhci driver.

The issue was found when pendrive was connected to suspended
platform. The link state of "Compliance Mode" was reported together
with CAS bit. This link state was also not supported by xhci and
core/hub.c.

The CAS bit is defined only for xhci root hub port and it is
not supported on regular hubs. The link status is used to force
warm reset on port. Make the USB core issue a warm reset when port
is in ether the 'inactive' or 'compliance mode'. Change the xHCI driver
to report 'compliance mode' when the CAS is set. This force warm reset
on the root hub port.

This patch should be backported to stable kernels as old as 3.2, that
contain the commit 10d674a82e553cb8a1f41027bb3c3e309b3f6804 "USB: When
hot reset for USB3 fails, try warm reset."

Signed-off-by: Stanislaw Ledwon <staszek.ledwon@linux.intel.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Acked-by: Andiry Xu <andiry.xu@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoUSB: option: Add MEDIATEK product ids
Gaosen Zhang [Thu, 5 Jul 2012 13:49:00 +0000]
USB: option: Add MEDIATEK product ids

commit aacef9c561a693341566a6850c451ce3df68cb9a upstream.

Signed-off-by: Gaosen Zhang <gaosen.zhang@mediatek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoUSB: option: add ZTE MF60
Bjørn Mork [Mon, 2 Jul 2012 17:53:55 +0000]
USB: option: add ZTE MF60

commit 8e16e33c168a6efd0c9f7fa9dd4c1e1db9a74553 upstream.

Switches into a composite device by ejecting the initial
driver CD.  The four interfaces are: QCDM, AT, QMI/wwan
and mass storage.  Let this driver manage the two serial
interfaces:

T:  Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 28 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=19d2 ProdID=1402 Rev= 0.00
S:  Manufacturer=ZTE,Incorporated
S:  Product=ZTE WCDMA Technologies MSM
S:  SerialNumber=xxxxx
C:* #Ifs= 4 Cfg#= 1 Atr=c0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E:  Ad=83(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoUSB: cdc-wdm: fix lockup on error in wdm_read
Bjørn Mork [Mon, 2 Jul 2012 08:33:14 +0000]
USB: cdc-wdm: fix lockup on error in wdm_read

commit b086b6b10d9f182cd8d2f0dcfd7fd11edba93fc9 upstream.

Clear the WDM_READ flag on empty reads to avoid running
forever in an infinite tight loop, causing lockups:

Jul  1 21:58:11 nemi kernel: [ 3658.898647] qmi_wwan 2-1:1.2: Unexpected error -71
Jul  1 21:58:36 nemi kernel: [ 3684.072021] BUG: soft lockup - CPU#0 stuck for 23s! [qmi.pl:12235]
Jul  1 21:58:36 nemi kernel: [ 3684.072212] CPU 0
Jul  1 21:58:36 nemi kernel: [ 3684.072355]
Jul  1 21:58:36 nemi kernel: [ 3684.072367] Pid: 12235, comm: qmi.pl Tainted: P           O 3.5.0-rc2+ #13 LENOVO 2776LEG/2776LEG
Jul  1 21:58:36 nemi kernel: [ 3684.072383] RIP: 0010:[<ffffffffa0635008>]  [<ffffffffa0635008>] spin_unlock_irq+0x8/0xc [cdc_wdm]
Jul  1 21:58:36 nemi kernel: [ 3684.072388] RSP: 0018:ffff88022dca1e70  EFLAGS: 00000282
Jul  1 21:58:36 nemi kernel: [ 3684.072393] RAX: ffff88022fc3f650 RBX: ffffffff811c56f7 RCX: 00000001000ce8c1
Jul  1 21:58:36 nemi kernel: [ 3684.072398] RDX: 0000000000000010 RSI: 000000000267d810 RDI: ffff88022fc3f650
Jul  1 21:58:36 nemi kernel: [ 3684.072403] RBP: ffff88022dca1eb0 R08: ffffffffa063578e R09: 0000000000000000
Jul  1 21:58:36 nemi kernel: [ 3684.072407] R10: 0000000000000008 R11: 0000000000000246 R12: 0000000000000002
Jul  1 21:58:36 nemi kernel: [ 3684.072412] R13: 0000000000000246 R14: ffffffff00000002 R15: ffff8802281d8c88
Jul  1 21:58:36 nemi kernel: [ 3684.072418] FS:  00007f666a260700(0000) GS:ffff88023bc00000(0000) knlGS:0000000000000000
Jul  1 21:58:36 nemi kernel: [ 3684.072423] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
Jul  1 21:58:36 nemi kernel: [ 3684.072428] CR2: 000000000270d9d8 CR3: 000000022e865000 CR4: 00000000000007f0
Jul  1 21:58:36 nemi kernel: [ 3684.072433] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
Jul  1 21:58:36 nemi kernel: [ 3684.072438] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Jul  1 21:58:36 nemi kernel: [ 3684.072444] Process qmi.pl (pid: 12235, threadinfo ffff88022dca0000, task ffff88022ff76380)
Jul  1 21:58:36 nemi kernel: [ 3684.072448] Stack:
Jul  1 21:58:36 nemi kernel: [ 3684.072458]  ffffffffa063592e 0000000100020000 ffff88022fc3f650 ffff88022fc3f6a8
Jul  1 21:58:36 nemi kernel: [ 3684.072466]  0000000000000200 0000000100000000 000000000267d810 0000000000000000
Jul  1 21:58:36 nemi kernel: [ 3684.072475]  0000000000000000 ffff880212cfb6d0 0000000000000200 ffff880212cfb6c0
Jul  1 21:58:36 nemi kernel: [ 3684.072479] Call Trace:
Jul  1 21:58:36 nemi kernel: [ 3684.072489]  [<ffffffffa063592e>] ? wdm_read+0x1a0/0x263 [cdc_wdm]
Jul  1 21:58:36 nemi kernel: [ 3684.072500]  [<ffffffff8110adb7>] ? vfs_read+0xa1/0xfb
Jul  1 21:58:36 nemi kernel: [ 3684.072509]  [<ffffffff81040589>] ? alarm_setitimer+0x35/0x64
Jul  1 21:58:36 nemi kernel: [ 3684.072517]  [<ffffffff8110aec7>] ? sys_read+0x45/0x6e
Jul  1 21:58:36 nemi kernel: [ 3684.072525]  [<ffffffff813725f9>] ? system_call_fastpath+0x16/0x1b
Jul  1 21:58:36 nemi kernel: [ 3684.072557] Code: <66> 66 90 c3 83 ff ed 89 f8 74 16 7f 06 83 ff a1 75 0a c3 83 ff f4

The WDM_READ flag is normally cleared by wdm_int_callback
before resubmitting the read urb, and set by wdm_in_callback
when this urb returns with data or an error.  But a crashing
device may cause both a read error and cancelling all urbs.
Make sure that the flag is cleared by wdm_read if the buffer
is empty.

We don't clear the flag on errors, as there may be pending
data in the buffer which should be processed.  The flag will
instead be cleared on the next wdm_read call.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Acked-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoUSB: metro-usb: fix tty_flip_buffer_push use
Johan Hovold [Mon, 2 Jul 2012 10:34:24 +0000]
USB: metro-usb: fix tty_flip_buffer_push use

commit b7d28e32c93801d60c1a7a817f774a02b7bdde43 upstream.

Do not set low_latency flag at open as tty_flip_buffer_push must not be
called in IRQ context with low_latency set.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoACPI / PM: Leave Bus Master Arbitration enabled for suspend/resume
Jonathan Nieder [Sun, 8 Jul 2012 19:55:14 +0000]
ACPI / PM: Leave Bus Master Arbitration enabled for suspend/resume

commit dc332fdf9f373a87b1e2f423b5b004b2a3c37e1a upstream.

This is an old suspend/resume lockup fix:

commit 2780cc4660e1
Author: Len Brown <len.brown@intel.com>
Date:   Thu Dec 23 13:43:30 2004 -0500

    [ACPI] Fix suspend/resume lockup issue
    by leaving Bus Master Arbitration enabled.
    The ACPI spec mandates it be disabled only for C3.

    http://bugzilla.kernel.org/show_bug.cgi?id=3599

    Signed-off-by: David Shaohua Li <shaohua.li@intel.com>
    Signed-off-by: Len Brown <len.brown@intel.com>

The bug snuck back in in commit 2feec47d4c5f (ACPICA: ACPI 5: Support
for new FADT SleepStatus, SleepControl registers, 2012-02-14),
presumably by copy/pasting a copy of the code without that fix for the
legacy case.

On affected machines, after that commit, the machine locks up hard on
resume from suspend.  The same fix as seven years ago still works.

Addresses <https://bugzilla.kernel.org/show_bug.cgi?id=43641>.

Reported-bisected-and-tested-by: Octavio Alvarez <alvarezp@alvarezp.com>
Reported-by: Adrian Knoth <adi@drcomp.erfurt.thur.de>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoSCSI: libsas: fix taskfile corruption in sas_ata_qc_fill_rtf
Dan Williams [Fri, 22 Jun 2012 17:52:34 +0000]
SCSI: libsas: fix taskfile corruption in sas_ata_qc_fill_rtf

commit 6ef1b512f4e6f936d89aa20be3d97a7ec7c290ac upstream.

fill_result_tf() grabs the taskfile flags from the originating qc which
sas_ata_qc_fill_rtf() promptly overwrites.  The presence of an
ata_taskfile in the sata_device makes it tempting to just copy the full
contents in sas_ata_qc_fill_rtf().  However, libata really only wants
the fis contents and expects the other portions of the taskfile to not
be touched by ->qc_fill_rtf.  To that end store a fis buffer in the
sata_device and use ata_tf_from_fis() like every other ->qc_fill_rtf()
implementation.

Reported-by: Praveen Murali <pmurali@logicube.com>
Tested-by: Praveen Murali <pmurali@logicube.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoSCSI: Fix NULL dereferences in scsi_cmd_to_driver
Mark Rustad [Thu, 21 Jun 2012 19:23:42 +0000]
SCSI: Fix NULL dereferences in scsi_cmd_to_driver

commit 222a806af830fda34ad1f6bc991cd226916de060 upstream.

Avoid crashing if the private_data pointer happens to be NULL. This has
been seen sometimes when a host reset happens, notably when there are
many LUNs:

host3: Assigned Port ID 0c1601
scsi host3: libfc: Host reset succeeded on port (0c1601)
BUG: unable to handle kernel NULL pointer dereference at 0000000000000350
IP: [<ffffffff81352bb8>] scsi_send_eh_cmnd+0x58/0x3a0
<snip>
Process scsi_eh_3 (pid: 4144, threadinfo ffff88030920c000, task ffff880326b160c0)
Stack:
 000000010372e6ba 0000000000000282 000027100920dca0 ffffffffa0038ee0
 0000000000000000 0000000000030003 ffff88030920dc80 ffff88030920dc80
 00000002000e0000 0000000a00004000 ffff8803242f7760 ffff88031326ed80
Call Trace:
 [<ffffffff8105b590>] ? lock_timer_base+0x70/0x70
 [<ffffffff81352fbe>] scsi_eh_tur+0x3e/0xc0
 [<ffffffff81353a36>] scsi_eh_test_devices+0x76/0x170
 [<ffffffff81354125>] scsi_eh_host_reset+0x85/0x160
 [<ffffffff81354291>] scsi_eh_ready_devs+0x91/0x110
 [<ffffffff813543fd>] scsi_unjam_host+0xed/0x1f0
 [<ffffffff813546a8>] scsi_error_handler+0x1a8/0x200
 [<ffffffff81354500>] ? scsi_unjam_host+0x1f0/0x1f0
 [<ffffffff8106ec3e>] kthread+0x9e/0xb0
 [<ffffffff81509264>] kernel_thread_helper+0x4/0x10
 [<ffffffff8106eba0>] ? kthread_freezable_should_stop+0x70/0x70
 [<ffffffff81509260>] ? gs_change+0x13/0x13
Code: 25 28 00 00 00 48 89 45 c8 31 c0 48 8b 87 80 00 00 00 48 8d b5 60 ff ff ff 89 d1 48 89 fb 41 89 d6 4c 89 fa 48 8b 80 b8 00 00 00
 <48> 8b 80 50 03 00 00 48 8b 00 48 89 85 38 ff ff ff 48 8b 07 4c
RIP  [<ffffffff81352bb8>] scsi_send_eh_cmnd+0x58/0x3a0
 RSP <ffff88030920dc50>
CR2: 0000000000000350

Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Tested-by: Marcus Dennis <marcusx.e.dennis@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoACPI / PM: Make acpi_pm_device_sleep_state() follow the specification
Rafael J. Wysocki [Tue, 29 May 2012 19:21:07 +0000]
ACPI / PM: Make acpi_pm_device_sleep_state() follow the specification

commit dbe9a2edd17d843d80faf2b99f20a691c1853418 upstream.

The comparison between the system sleep state being entered
and the lowest system sleep state the given device may wake up
from in acpi_pm_device_sleep_state() is reversed, because the
specification (ACPI 5.0) says that for wakeup to work:

"The sleeping state being entered must be less than or equal to the
 power state declared in element 1 of the _PRW object."

In other words, the state returned by _PRW is the deepest
(lowest-power) system sleep state the device is capable of waking up
the system from.

Moreover, acpi_pm_device_sleep_state() also should check if the
wakeup capability is supported through ACPI, because in principle it
may be done via native PCIe PME, for example, in which case _SxW
should not be evaluated.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoHID: hid-multitouch: fix wrong protocol detection
Benjamin Tissoires [Fri, 4 May 2012 12:53:46 +0000]
HID: hid-multitouch: fix wrong protocol detection

commit 3ac36d15557d1bedfb1151d9911b9587b2d40759 upstream.

The previous implementation introduced a randomness in the splitting
of the different touches reported by the device. This version is more
robust as we don't rely on hi->input->absbit, but on our own structure.

This also prepares hid-multitouch to better support Win8 devices.

[Jiri Kosina <jkosina@suse.cz>: fix build]

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Acked-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoe1000e: test for valid check_reset_block function pointer
Bruce Allan [Sat, 26 May 2012 06:08:48 +0000]
e1000e: test for valid check_reset_block function pointer

commit 470a54207ccf7045a59df727573bd9d148988582 upstream.

commit 44abd5c12767a8c567dc4e45fd9aec3b13ca85e0 introduced NULL pointer
dereferences when attempting to access the check_reset_block function
pointer on 8257x and 80003es2lan non-copper devices.

This fix should be applied back through 3.4.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoOMAPDSS: use DSI_FIFO_BUG workaround only for manual update displays
Tomi Valkeinen [Tue, 15 May 2012 12:31:01 +0000]
OMAPDSS: use DSI_FIFO_BUG workaround only for manual update displays

commit 3568f2a46f2a73bab18c914df06afd98a97e0e0e upstream.

There is a problem related to DSS FIFO thresholds and power management
on OMAP3. It seems that when the full PM hits in, we get underflows. The
core reason is unknown, but after experiments it looks like only
particular FIFO thresholds work correctly.

This bug is related to an earlier patch, which added special FIFO
threshold configuration for OMAP3, because DSI command mode output
didn't work with the normal threshold configuration.

However, as the above work-around worked fine for other output types
also, we currently always configure thresholds in this special way on
OMAP3. In theory there should be negligible difference with this special
way and the standard way. The first paragraph explains what happens in
practice.

This patch changes the driver to use the special threshold configuration
only when the output is a manual update display on OMAP3. This does
include RFBI displays also, and although it hasn't been tested (no
boards using RFBI) I suspect the similar behaviour is present there
also, as the DISPC side should work similarly for DSI command mode and
RFBI.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Joe Woodward <jw@terrafix.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agomm/memblock: fix overlapping allocation when doubling reserved array
Greg Pearson [Wed, 20 Jun 2012 19:53:05 +0000]
mm/memblock: fix overlapping allocation when doubling reserved array

commit 48c3b583bbddad2220ca4c22319ca5d1f78b2090 upstream.

__alloc_memory_core_early() asks memblock for a range of memory then try
to reserve it.  If the reserved region array lacks space for the new
range, memblock_double_array() is called to allocate more space for the
array.  If memblock is used to allocate memory for the new array it can
end up using a range that overlaps with the range originally allocated in
__alloc_memory_core_early(), leading to possible data corruption.

With this patch memblock_double_array() now calls memblock_find_in_range()
with a narrowed candidate range (in cases where the reserved.regions array
is being doubled) so any memory allocated will not overlap with the
original range that was being reserved.  The range is narrowed by passing
in the starting address and size of the previously allocated range.  Then
the range above the ending address is searched and if a candidate is not
found, the range below the starting address is searched.

Signed-off-by: Greg Pearson <greg.pearson@hp.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agomm/memblock: fix memory leak on extending regions
Gavin Shan [Tue, 29 May 2012 22:06:50 +0000]
mm/memblock: fix memory leak on extending regions

commit 181eb39425f2b9275afcb015eaa547d11f71a02f upstream.

The overall memblock has been organized into the memory regions and
reserved regions.  Initially, the memory regions and reserved regions are
stored in the predetermined arrays of "struct memblock _region".  It's
possible for the arrays to be enlarged when we have newly added regions,
but no free space left there.  The policy here is to create double-sized
array either by slab allocator or memblock allocator.  Unfortunately, we
didn't free the old array, which might be allocated through slab allocator
before.  That would cause memory leak.

The patch introduces 2 variables to trace where (slab or memblock) the
memory and reserved regions come from.  The memory for the memory or
reserved regions will be deallocated by kfree() if that was allocated by
slab allocator.  Thus to fix the memory leak issue.

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agomm/memblock: cleanup on duplicate VA/PA conversion
Gavin Shan [Tue, 29 May 2012 22:06:50 +0000]
mm/memblock: cleanup on duplicate VA/PA conversion

commit 4e2f07750d9a94e8f23e86408df5ab95be88bf11 upstream.

The overall memblock has been organized into the memory regions and
reserved regions.  Initially, the memory regions and reserved regions are
stored in the predetermined arrays of "struct memblock _region".  It's
possible for the arrays to be enlarged when we have newly added regions
for them, but no enough space there.  Under the situation, We will created
double-sized array to meet the requirement.  However, the original
implementation converted the VA (Virtual Address) of the newly allocated
array of regions to PA (Physical Address), then translate back when we
allocates the new array from slab.  That's actually unnecessary.

The patch removes the duplicate VA/PA conversion.

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoeCryptfs: Properly check for O_RDONLY flag before doing privileged open
Tyler Hicks [Tue, 12 Jun 2012 18:17:01 +0000]
eCryptfs: Properly check for O_RDONLY flag before doing privileged open

commit 9fe79d7600497ed8a95c3981cbe5b73ab98222f0 upstream.

If the first attempt at opening the lower file read/write fails,
eCryptfs will retry using a privileged kthread. However, the privileged
retry should not happen if the lower file's inode is read-only because a
read/write open will still be unsuccessful.

The check for determining if the open should be retried was intended to
be based on the access mode of the lower file's open flags being
O_RDONLY, but the check was incorrectly performed. This would cause the
open to be retried by the privileged kthread, resulting in a second
failed open of the lower file. This patch corrects the check to
determine if the open request should be handled by the privileged
kthread.

Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoeCryptfs: Fix lockdep warning in miscdev operations
Tyler Hicks [Mon, 11 Jun 2012 17:21:34 +0000]
eCryptfs: Fix lockdep warning in miscdev operations

commit 60d65f1f07a7d81d3eb3b91fc13fca80f2fdbb12 upstream.

Don't grab the daemon mutex while holding the message context mutex.
Addresses this lockdep warning:

 ecryptfsd/2141 is trying to acquire lock:
  (&ecryptfs_msg_ctx_arr[i].mux){+.+.+.}, at: [<ffffffffa029c213>] ecryptfs_miscdev_read+0x143/0x470 [ecryptfs]

 but task is already holding lock:
  (&(*daemon)->mux){+.+...}, at: [<ffffffffa029c2ec>] ecryptfs_miscdev_read+0x21c/0x470 [ecryptfs]

 which lock already depends on the new lock.

 the existing dependency chain (in reverse order) is:

 -> #1 (&(*daemon)->mux){+.+...}:
        [<ffffffff810a3b8d>] lock_acquire+0x9d/0x220
        [<ffffffff8151c6da>] __mutex_lock_common+0x5a/0x4b0
        [<ffffffff8151cc64>] mutex_lock_nested+0x44/0x50
        [<ffffffffa029c5d7>] ecryptfs_send_miscdev+0x97/0x120 [ecryptfs]
        [<ffffffffa029b744>] ecryptfs_send_message+0x134/0x1e0 [ecryptfs]
        [<ffffffffa029a24e>] ecryptfs_generate_key_packet_set+0x2fe/0xa80 [ecryptfs]
        [<ffffffffa02960f8>] ecryptfs_write_metadata+0x108/0x250 [ecryptfs]
        [<ffffffffa0290f80>] ecryptfs_create+0x130/0x250 [ecryptfs]
        [<ffffffff811963a4>] vfs_create+0xb4/0x120
        [<ffffffff81197865>] do_last+0x8c5/0xa10
        [<ffffffff811998f9>] path_openat+0xd9/0x460
        [<ffffffff81199da2>] do_filp_open+0x42/0xa0
        [<ffffffff81187998>] do_sys_open+0xf8/0x1d0
        [<ffffffff81187a91>] sys_open+0x21/0x30
        [<ffffffff81527d69>] system_call_fastpath+0x16/0x1b

 -> #0 (&ecryptfs_msg_ctx_arr[i].mux){+.+.+.}:
        [<ffffffff810a3418>] __lock_acquire+0x1bf8/0x1c50
        [<ffffffff810a3b8d>] lock_acquire+0x9d/0x220
        [<ffffffff8151c6da>] __mutex_lock_common+0x5a/0x4b0
        [<ffffffff8151cc64>] mutex_lock_nested+0x44/0x50
        [<ffffffffa029c213>] ecryptfs_miscdev_read+0x143/0x470 [ecryptfs]
        [<ffffffff811887d3>] vfs_read+0xb3/0x180
        [<ffffffff811888ed>] sys_read+0x4d/0x90
        [<ffffffff81527d69>] system_call_fastpath+0x16/0x1b

Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoeCryptfs: Gracefully refuse miscdev file ops on inherited/passed files
Tyler Hicks [Mon, 11 Jun 2012 16:24:11 +0000]
eCryptfs: Gracefully refuse miscdev file ops on inherited/passed files

commit 8dc6780587c99286c0d3de747a2946a76989414a upstream.

File operations on /dev/ecryptfs would BUG() when the operations were
performed by processes other than the process that originally opened the
file. This could happen with open files inherited after fork() or file
descriptors passed through IPC mechanisms. Rather than calling BUG(), an
error code can be safely returned in most situations.

In ecryptfs_miscdev_release(), eCryptfs still needs to handle the
release even if the last file reference is being held by a process that
didn't originally open the file. ecryptfs_find_daemon_by_euid() will not
be successful, so a pointer to the daemon is stored in the file's
private_data. The private_data pointer is initialized when the miscdev
file is opened and only used when the file is released.

https://launchpad.net/bugs/994247

Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Reported-by: Sasha Levin <levinsasha928@gmail.com>
Tested-by: Sasha Levin <levinsasha928@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agodm persistent data: fix allocation failure in space map checker init
Mike Snitzer [Tue, 3 Jul 2012 11:55:37 +0000]
dm persistent data: fix allocation failure in space map checker init

commit b0239faaf87c38bb419c9264bf20817438ddc3a9 upstream.

If CONFIG_DM_DEBUG_SPACE_MAPS is enabled and memory is fragmented and a
sufficiently-large metadata device is used in a thin pool then the space
map checker will fail to allocate the memory it requires.

Switch from kmalloc to vmalloc to allow larger virtually contiguous
allocations for the space map checker's internal count arrays.

Reported-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agodm persistent data: handle space map checker creation failure
Mike Snitzer [Tue, 3 Jul 2012 11:55:35 +0000]
dm persistent data: handle space map checker creation failure

commit 62662303e7f590fdfbb0070ab820a0ad4267c119 upstream.

If CONFIG_DM_DEBUG_SPACE_MAPS is enabled and dm_sm_checker_create()
fails, dm_tm_create_internal() would still return success even though it
cleaned up all resources it was supposed to have created.  This will
lead to a kernel crash:

general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC
...
RIP: 0010:[<ffffffff81593659>]  [<ffffffff81593659>] dm_bufio_get_block_size+0x9/0x20
Call Trace:
  [<ffffffff81599bae>] dm_bm_block_size+0xe/0x10
  [<ffffffff8159b8b8>] sm_ll_init+0x78/0xd0
  [<ffffffff8159c1a6>] sm_ll_new_disk+0x16/0xa0
  [<ffffffff8159c98e>] dm_sm_disk_create+0xfe/0x160
  [<ffffffff815abf6e>] dm_pool_metadata_open+0x16e/0x6a0
  [<ffffffff815aa010>] pool_ctr+0x3f0/0x900
  [<ffffffff8158d565>] dm_table_add_target+0x195/0x450
  [<ffffffff815904c4>] table_load+0xe4/0x330
  [<ffffffff815917ea>] ctl_ioctl+0x15a/0x2c0
  [<ffffffff81591963>] dm_ctl_ioctl+0x13/0x20
  [<ffffffff8116a4f8>] do_vfs_ioctl+0x98/0x560
  [<ffffffff8116aa51>] sys_ioctl+0x91/0xa0
  [<ffffffff81869f52>] system_call_fastpath+0x16/0x1b

Fix the space map checker code to return an appropriate ERR_PTR and have
dm_sm_disk_create() and dm_tm_create_internal() check for it with
IS_ERR.

Reported-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agodm persistent data: fix shadow_info_leak on dm_tm_destroy
Mike Snitzer [Tue, 3 Jul 2012 11:55:33 +0000]
dm persistent data: fix shadow_info_leak on dm_tm_destroy

commit 25d7cd6faa7ae6ed2565617c3ee2500ccb8a9f7f upstream.

Cleanup the shadow table before destroying the transaction manager.

Reference: leak was identified with kmemleak when running
test_discard_random_sectors in the thinp-test-suite.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agodm: verity fix documentation
Milan Broz [Tue, 3 Jul 2012 11:55:41 +0000]
dm: verity fix documentation

commit 18068bdd5f59229623b2fa518a6389e346642b0d upstream.

Veritysetup is now part of cryptsetup package.
Remove on-disk header description (which is not parsed in kernel)
and point users to cryptsetup where it the format is documented.
Mention units for block size paramaters.
Fix target line specification and dmsetup parameters.

Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agomd/raid5: In ops_run_io, inc nr_pending before calling md_wait_for_blocked_rdev
majianpeng [Tue, 3 Jul 2012 02:11:54 +0000]
md/raid5: In ops_run_io, inc nr_pending before calling md_wait_for_blocked_rdev

commit 1850753d2e6d9ca7856581ca5d3cf09521e6a5d7 upstream.

In ops_run_io(), the call to md_wait_for_blocked_rdev will decrement
nr_pending so we lose the reference we hold on the rdev.
So atomic_inc it first to maintain the reference.

This bug was introduced by commit  73e92e51b7969ef5477d
    md/raid5.  Don't write to known bad block on doubtful devices.

which appeared in 3.0, so patch is suitable for stable kernels since
then.

Signed-off-by: majianpeng <majianpeng@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agomd/raid10: fix failure when trying to repair a read error.
NeilBrown [Tue, 3 Jul 2012 05:55:33 +0000]
md/raid10: fix failure when trying to repair a read error.

commit 055d3747dbf00ce85c6872ecca4d466638e80c22 upstream.

commit 58c54fcca3bac5bf9290cfed31c76e4c4bfbabaf
     md/raid10: handle further errors during fix_read_error better.

in 3.1 added "r10_sync_page_io" which takes an IO size in sectors.
But we were passing the IO size in bytes!!!
This resulting in bio_add_page failing, and empty request being sent
down, and a consequent BUG_ON in scsi_lib.

[fix missing space in error message at same time]

This fix is suitable for 3.1.y and later.

Reported-by: Christian Balzer <chibi@gol.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agomd/raid10: Don't try to recovery unmatched (and unused) chunks.
NeilBrown [Tue, 3 Jul 2012 00:37:30 +0000]
md/raid10: Don't try to recovery unmatched (and unused) chunks.

commit fc448a18ae6219af9a73257b1fbcd009efab4a81 upstream.

If a RAID10 has an odd number of chunks - as might happen when there
are an odd number of devices - the last chunk has no pair and so is
not mirrored.  We don't store data there, but when recovering the last
device in an array we retry to recover that last chunk from a
non-existent location.  This results in an error, and the recovery
aborts.

When we get to that last chunk we should just stop - there is nothing
more to do anyway.

This bug has been present since the introduction of RAID10, so the
patch is appropriate for any -stable kernel.

Reported-by: Christian Balzer <chibi@gol.com>
Tested-by: Christian Balzer <chibi@gol.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agohwspinlock/core: use global ID to register hwspinlocks on multiple devices
Shinya Kuribayashi [Sat, 7 Jul 2012 10:37:42 +0000]
hwspinlock/core: use global ID to register hwspinlocks on multiple devices

commit 476a7eeb60e70ddab138e7cb4bc44ef5ac20782e upstream.

Commit 300bab9770 (hwspinlock/core: register a bank of hwspinlocks in a
single API call, 2011-09-06) introduced 'hwspin_lock_register_single()'
to register numerous (a bank of) hwspinlock instances in a single API,
'hwspin_lock_register()'.

At which time, 'hwspin_lock_register()' accidentally passes 'local IDs'
to 'hwspin_lock_register_single()', despite that ..._single() requires
'global IDs' to register hwspinlocks.

We have to convert into global IDs by supplying the missing 'base_id'.

Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi.px@renesas.com>
[ohad: fix error path of hwspin_lock_register, too]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoremoteproc: fix missing CONFIG_FW_LOADER configurations
Ohad Ben-Cohen [Sun, 1 Jul 2012 08:53:36 +0000]
remoteproc: fix missing CONFIG_FW_LOADER configurations

commit e121aefa7d9f10eee5cf26ed47129237a05d940b upstream.

Remoteproc requires user space firmware loading support, so
let's select FW_LOADER explicitly to avoid painful misconfigurations
(which only show up in runtime).

Reported-by: Mark Grosen <mgrosen@ti.com>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoremoteproc/omap: fix randconfig unmet direct dependencies
Ohad Ben-Cohen [Sun, 1 Jul 2012 08:31:35 +0000]
remoteproc/omap: fix randconfig unmet direct dependencies

commit d50394266b340d930a7458fa669d36e99670f200 upstream.

OMAP_REMOTEPROC selects REMOTEPROC and RPMSG, both of which depend
on EXPERIMENTAL, so let's have OMAP_REMOTEPROC depend on EXPERIMENTAL
too, in order to avoid the below randconfig warnings.

warning: (OMAP_REMOTEPROC) selects REMOTEPROC which has unmet direct dependencies (EXPERIMENTAL)
warning: (OMAP_REMOTEPROC) selects RPMSG which has unmet direct dependencies (EXPERIMENTAL)

Reported-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoe1000e: remove use of IP payload checksum
Bruce Allan [Sat, 30 Jun 2012 20:02:42 +0000]
e1000e: remove use of IP payload checksum

commit 2e1706f234f86ff71056ef69683d734fbf7e9e40 upstream.

Currently only used when packet split mode is enabled with jumbo frames,
IP payload checksum (for fragmented UDP packets) is mutually exclusive with
receive hashing offload since the hardware uses the same space in the
receive descriptor for the hardware-provided packet checksum and the RSS
hash, respectively.  Users currently must disable jumbos when receive
hashing offload is enabled, or vice versa, because of this incompatibility.
Since testing has shown that IP payload checksum does not provide any real
benefit, just remove it so that there is no longer a choice between jumbos
or receive hashing offload but not both as done in other Intel GbE drivers
(e.g. e1000, igb).

Also, add a missing check for IP checksum error reported by the hardware;
let the stack verify the checksum when this happens.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agotcm_fc: Resolve suspicious RCU usage warnings
Mark Rustad [Tue, 26 Jun 2012 22:57:30 +0000]
tcm_fc: Resolve suspicious RCU usage warnings

commit 863555be0c81558b1af277addcf68acb8f778860 upstream.

Use rcu_dereference_protected to tell rcu that the ft_lport_lock
is held during ft_lport_create. This resolved "suspicious RCU usage"
warnings when debugging options are turned on.

Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoiwlwifi: fix activating inactive stations
Johannes Berg [Mon, 25 Jun 2012 07:36:41 +0000]
iwlwifi: fix activating inactive stations

commit eac9ac6d1f5d0e9d33e4ded682187b630e7606cd upstream.

When authentication/association timed out, the driver would
complain bitterly, printing the message
ACTIVATE a non DRIVER active station id ... addr ...

The cause turns out to be that when the AP station is added
but we don't associate, the IWL_STA_UCODE_INPROGRESS is set
but never cleared. This then causes iwl_restore_stations()
to attempt to resend it because it uses the flag internally
and uploads even if it didn't set it itself.

To fix this issue and not upload the station again when it
has already been removed by mac80211, clear the flag after
adding it in case we add it only for association.

Reviewed-by: Meenakshi Venkataraman <meenakshi.venkataraman@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoocfs2: clear unaligned io flag when dio fails
Junxiao Bi [Wed, 27 Jun 2012 09:09:55 +0000]
ocfs2: clear unaligned io flag when dio fails

commit 3e5d3c35a68c9a933bdbdd8685bd1a205b57e806 upstream.

The unaligned io flag is set in the kiocb when an unaligned
dio is issued, it should be cleared even when the dio fails,
or it may affect the following io which are using the same
kiocb.

Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoaio: make kiocb->private NUll in init_sync_kiocb()
Junxiao Bi [Wed, 27 Jun 2012 09:09:54 +0000]
aio: make kiocb->private NUll in init_sync_kiocb()

commit 2dfd06036ba7ae8e7be2daf5a2fff1dac42390bf upstream.

Ocfs2 uses kiocb.*private as a flag of unsigned long size. In
commit a11f7e6 ocfs2: serialize unaligned aio, the unaligned
io flag is involved in it to serialize the unaligned aio. As
*private is not initialized in init_sync_kiocb() of do_sync_write(),
this unaligned io flag may be unexpectly set in an aligned dio.
And this will cause OCFS2_I(inode)->ip_unaligned_aio decreased
to -1 in ocfs2_dio_end_io(), thus the following unaligned dio
will hang forever at ocfs2_aiodio_wait() in ocfs2_file_aio_write().

Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agomtd: cafe_nand: fix an & vs | mistake
Dan Carpenter [Sat, 9 Jun 2012 16:08:25 +0000]
mtd: cafe_nand: fix an & vs | mistake

commit 48f8b641297df49021093763a3271119a84990a2 upstream.

The intent here was clearly to set result to true if the 0x40000000 flag
was set.  But instead there was a | vs & typo and we always set result
to true.

Artem: check the spec at
wiki.laptop.org/images/5/5c/88ALP01_Datasheet_July_2007.pdf
and this fix looks correct.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agovfs: make O_PATH file descriptors usable for 'fchdir()'
Linus Torvalds [Sat, 7 Jul 2012 17:17:00 +0000]
vfs: make O_PATH file descriptors usable for 'fchdir()'

commit 332a2e1244bd08b9e3ecd378028513396a004a24 upstream.

We already use them for openat() and friends, but fchdir() also wants to
be able to use O_PATH file descriptors.  This should make it comparable
to the O_SEARCH of Solaris.  In particular, O_PATH allows you to access
(not-quite-open) a directory you don't have read persmission to, only
execute permission.

Noticed during development of multithread support for ksh93.

Reported-by: ольга крыжановская <olga.kryzhanovska@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agomwifiex: fix WPS eapol handshake failure
Stone Piao [Thu, 21 Jun 2012 03:21:11 +0000]
mwifiex: fix WPS eapol handshake failure

commit f03ba7e9a24e5e9efaad56bd1713b994ea556b16 upstream.

After association, STA will go through eapol handshake with WPS
enabled AP. It's observed that WPS handshake fails with some 11n
AP. The reason for the failure is that the eapol packet is sent
via 11n frame aggregation.

The eapol packet should be sent directly without 11n aggregation.

This patch fixes the problem by adding WPS session control while
dequeuing Tx packets for transmission.

Signed-off-by: Stone Piao <piaoyun@marvell.com>
Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agomwifiex: fix 11n rx packet drop issue
Stone Piao [Thu, 21 Jun 2012 03:21:10 +0000]
mwifiex: fix 11n rx packet drop issue

commit 925839243dc9aa4ef25305f5afd10ed18258a4ac upstream.

Currently we check the sequence number of last packet received
against start_win. If a sequence hole is detected, start_win is
updated to next sequence number.

Since the rx sequence number is initialized to 0, a corner case
exists when BA setup happens immediately after association. As
0 is a valid sequence number, start_win gets increased to 1
incorrectly. This causes the first packet with sequence number 0
being dropped.

Initialize rx sequence number as 0xffff and skip adjusting
start_win if the sequence number remains 0xffff. The sequence
number will be updated once the first packet is received.

Signed-off-by: Stone Piao <piaoyun@marvell.com>
Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Kiran Divekar <dkiran@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agomac80211: correct behaviour on unrecognised action frames
Johannes Berg [Wed, 27 Jun 2012 13:38:56 +0000]
mac80211: correct behaviour on unrecognised action frames

commit 4b5ebccc40843104d980f0714bc86bfcd5568941 upstream.

When receiving an "individually addressed" action frame, the
receiver is required to return it to the sender. mac80211
gets this wrong as it also returns group addressed (mcast)
frames to the sender. Fix this and update the reference to
the new 802.11 standards version since things were shuffled
around significantly.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agomac80211: clear ifmgd->bssid only after building DELBA
Eliad Peller [Fri, 1 Jun 2012 08:14:03 +0000]
mac80211: clear ifmgd->bssid only after building DELBA

commit 88a9e31c506c00c8b7a2f1611406d0e38dcb33b3 upstream.

ieee80211_set_disassoc() clears ifmgd->bssid before
building DELBA frames, resulting in frames with invalid
bssid ("00:00:00:00:00:00").

Fix it by clearing ifmgd->bssid only after building
all the needed frames.

After this change, we no longer need to save the
bssid (before clearing it), so remove the local array.

Reported-by: Ido Yariv <ido@wizery.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agortlwifi: rtl8192cu: New USB IDs
Larry Finger [Mon, 25 Jun 2012 23:01:12 +0000]
rtlwifi: rtl8192cu: New USB IDs

commit f63d7dabd5da9ef41f28f6d69b29bc084db0ca5a upstream.

The latest Realtek driver for the RTL8188CU and RTL8192CU chips adds three
new USB IDs.

Reported-by: Xose Vazquez Perez <xose.vazquez@gmail.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoigbvf: fix divide by zero
Mitch A Williams [Sat, 30 Jun 2012 00:23:19 +0000]
igbvf: fix divide by zero

commit 0e90b49ca4b891f085b57559a3071a4feefb496c upstream.

Using ethtool -C ethX rx-usecs 0 crashes with a divide by zero.
Refactor this function to fix this issue and make it more clear
what the intent of each conditional is. Add comment regarding
using a setting of zero.

CC: David Ahern <daahern@cisco.com>
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agox86, cpufeature: Rename X86_FEATURE_DTS to X86_FEATURE_DTHERM
H. Peter Anvin [Fri, 22 Jun 2012 17:58:06 +0000]
x86, cpufeature: Rename X86_FEATURE_DTS to X86_FEATURE_DTHERM

commit 4ad33411308596f2f918603509729922a1ec4411 upstream.

It makes sense to label "Digital Thermal Sensor" as "DTS", but
unfortunately the string "dts" was already used for "Debug Store", and
/proc/cpuinfo is a user space ABI.

Therefore, rename this to "dtherm".

This conflict went into mainline via the hwmon tree without any x86
maintainer ack, and without any kind of hint in the subject.

    a4659053 x86/hwmon: fix initialization of coretemp

Reported-by: Jean Delvare <khali@linux-fr.org>
Link: http://lkml.kernel.org/r/4FE34BCB.5050305@linux.intel.com
Cc: Jan Beulich <JBeulich@suse.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agox86, compat: Use test_thread_flag(TIF_IA32) in compat signal delivery
Suresh Siddha [Fri, 15 Jun 2012 01:07:15 +0000]
x86, compat: Use test_thread_flag(TIF_IA32) in compat signal delivery

commit 0b91f45b23cb73ce11acdc3cf4c6efd4441e3b3e upstream.

Signal delivery compat path may not have the 'TS_COMPAT' flag (that
flag indicates how we entered the kernel).  So use
test_thread_flag(TIF_IA32) instead of is_ia32_task(): one of the
functions of TIF_IA32 is just what kind of signal frame we want.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Link: http://lkml.kernel.org/r/1339722435.3475.57.camel@sbsiddha-desk.sc.intel.com
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agooprofile: perf: use NR_CPUS instead or nr_cpumask_bits for static array
Will Deacon [Fri, 8 Jun 2012 15:16:04 +0000]
oprofile: perf: use NR_CPUS instead or nr_cpumask_bits for static array

commit e734568b675c985db2026848fefaac01c22977a5 upstream.

The OProfile perf backend uses a static array to keep track of the
perf events on the system. When compiling with CONFIG_CPUMASK_OFFSTACK=y
&& SMP, nr_cpumask_bits is not a compile-time constant and the build
will fail with:

oprofile_perf.c:28: error: variably modified 'perf_events' at file scope

This patch uses NR_CPUs instead of nr_cpumask_bits for the array
initialisation. If this causes space problems in the future, we can
always move to dynamic allocation for the events array.

Cc: Matt Fleming <matt@console-pimps.org>
Reported-by: Russell King - ARM Linux <linux@arm.linux.org.uk>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agonet: qmi_wwan: fix Oops while disconnecting
Bjørn Mork [Thu, 21 Jun 2012 23:11:18 +0000]
net: qmi_wwan: fix Oops while disconnecting

commit d9b8706843a501034d09bea63ca6723a2ed02b11 upstream.

usbnet_disconnect() will set intfdata to NULL before calling
the minidriver unbind function.  The cdc_wdm subdriver cannot
know that it is disconnecting until the qmi_wwan unbind
function has called its disconnect function.  This means that
we must be able to support the cdc_wdm subdriver operating
normally while usbnet_disconnect() is running, and in
particular that intfdata may be NULL.

The only place this matters is in qmi_wwan_cdc_wdm_manage_power
which is called from cdc_wdm.  Simply testing for NULL
intfdata there is sufficient to allow it to continue working
at all times.

Fixes this Oops where a cdc-wdm device was closed while the
USB device was disconnecting, causing wdm_release to call
qmi_wwan_cdc_wdm_manage_power after intfdata was set to
NULL by usbnet_disconnect:

[41819.087460] BUG: unable to handle kernel NULL pointer dereference at 00000080
[41819.087815] IP: [<f8640458>] qmi_wwan_manage_power+0x68/0x90 [qmi_wwan]
[41819.088028] *pdpt = 000000000314f001 *pde = 0000000000000000
[41819.088028] Oops: 0002 [#1] SMP
[41819.088028] Modules linked in: qmi_wwan option usb_wwan usbserial usbnet
cdc_wdm nls_iso8859_1 nls_cp437 vfat fat usb_storage bnep rfcomm bluetooth
parport_pc ppdev binfmt_misc iptable_nat nf_nat nf_conntrack_ipv4
nf_conntrack nf_defrag_ipv4 iptable_mangle iptable_filter ip_tables
x_tables dm_crypt uvcvideo snd_hda_codec_realtek snd_hda_intel
videobuf2_core snd_hda_codec joydev videodev videobuf2_vmalloc
hid_multitouch snd_hwdep arc4 videobuf2_memops snd_pcm snd_seq_midi
snd_rawmidi snd_seq_midi_event ath9k mac80211 snd_seq ath9k_common ath9k_hw
ath snd_timer snd_seq_device sparse_keymap dm_multipath scsi_dh coretemp
mac_hid snd soundcore cfg80211 snd_page_alloc psmouse serio_raw microcode
lp parport dm_mirror dm_region_hash dm_log usbhid hid i915 drm_kms_helper
drm r8169 i2c_algo_bit wmi video [last unloaded: qmi_wwan]
[41819.088028]
[41819.088028] Pid: 23292, comm: qmicli Not tainted 3.4.0-5-generic #11-Ubuntu GIGABYTE T1005/T1005
[41819.088028] EIP: 0060:[<f8640458>] EFLAGS: 00010246 CPU: 1
[41819.088028] EIP is at qmi_wwan_manage_power+0x68/0x90 [qmi_wwan]
[41819.088028] EAX: 00000000 EBX: 00000000 ECX: 000000c3 EDX: 00000000
[41819.088028] ESI: c3b27658 EDI: 00000000 EBP: c298bea4 ESP: c298be98
[41819.088028]  DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
[41819.088028] CR0: 8005003b CR2: 00000080 CR3: 3605e000 CR4: 000007f0
[41819.088028] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
[41819.088028] DR6: ffff0ff0 DR7: 00000400
[41819.088028] Process qmicli (pid: 23292, ti=c298a000 task=f343b280 task.ti=c298a000)
[41819.088028] Stack:
[41819.088028]  00000000 c3b27658 e2a80d00 c298beb0 f864051a c3b27600 c298bec0 f9027099
[41819.088028]  c2fd6000 00000008 c298bef0 c1147f96 00000001 00000000 00000000 f4e54790
[41819.088028]  ecf43a00 ecf43a00 c2fd6008 c2fd6000 ebbd7600 ffffffb9 c298bf08 c1144474
[41819.088028] Call Trace:
[41819.088028]  [<f864051a>] qmi_wwan_cdc_wdm_manage_power+0x1a/0x20 [qmi_wwan]
[41819.088028]  [<f9027099>] wdm_release+0x69/0x70 [cdc_wdm]
[41819.088028]  [<c1147f96>] fput+0xe6/0x210
[41819.088028]  [<c1144474>] filp_close+0x54/0x80
[41819.088028]  [<c1046a65>] put_files_struct+0x75/0xc0
[41819.088028]  [<c1046b56>] exit_files+0x46/0x60
[41819.088028]  [<c1046f81>] do_exit+0x141/0x780
[41819.088028]  [<c107248f>] ? wake_up_state+0xf/0x20
[41819.088028]  [<c1053f48>] ? signal_wake_up+0x28/0x40
[41819.088028]  [<c1054f3b>] ? zap_other_threads+0x6b/0x80
[41819.088028]  [<c1047864>] do_group_exit+0x34/0xa0
[41819.088028]  [<c10478e8>] sys_exit_group+0x18/0x20
[41819.088028]  [<c15bb7df>] sysenter_do_call+0x12/0x28
[41819.088028] Code: 04 83 e7 01 c1 e7 03 0f b6 42 18 83 e0 f7 09 f8 88 42
18 8b 43 04 e8 48 9a dd c8 89 f0 8b 5d f4 8b 75 f8 8b 7d fc 89 ec 5d c3 90
<f0> ff 88 80 00 00 00 0f 94 c0 84 c0 75 b7 31 f6 8b 5d f4 89 f0
[41819.088028] EIP: [<f8640458>] qmi_wwan_manage_power+0x68/0x90 [qmi_wwan] SS:ESP 0068:c298be98
[41819.088028] CR2: 0000000000000080
[41819.149492] ---[ end trace 0944479ff8257f55 ]---

Reported-by: Marius Bjørnstad Kotsbak <marius.kotsbak@gmail.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agonet: qmi_wwan: fix Gobi device probing
Bjørn Mork [Thu, 21 Jun 2012 02:45:58 +0000]
net: qmi_wwan: fix Gobi device probing

commit b9f90eb2740203ff2592efe640409ad48335d1c2 upstream.

Ignoring interfaces with additional descriptors is not a reliable
method for locating the correct interface on Gobi devices.  There
is at least one device where this method fails:
https://bbs.archlinux.org/viewtopic.php?id=143506

The result is that the AT command port (interface #2) is hidden
from qcserial, preventing traditional serial modem usage:

[   15.562552] qmi_wwan 4-1.6:1.0: cdc-wdm0: USB WDM device
[   15.562691] qmi_wwan 4-1.6:1.0: wwan0: register 'qmi_wwan' at usb-0000:00:1d.0-1.6, Qualcomm Gobi wwan/QMI device, 1e:df:3c:3a:4e:3b
[   15.563383] qmi_wwan: probe of 4-1.6:1.1 failed with error -22
[   15.564189] qmi_wwan 4-1.6:1.2: cdc-wdm1: USB WDM device
[   15.564302] qmi_wwan 4-1.6:1.2: wwan1: register 'qmi_wwan' at usb-0000:00:1d.0-1.6, Qualcomm Gobi wwan/QMI device, 1e:df:3c:3a:4e:3b
[   15.564328] qmi_wwan: probe of 4-1.6:1.3 failed with error -22
[   15.569376] qcserial 4-1.6:1.1: Qualcomm USB modem converter detected
[   15.569440] usb 4-1.6: Qualcomm USB modem converter now attached to ttyUSB0
[   15.570372] qcserial 4-1.6:1.3: Qualcomm USB modem converter detected
[   15.570430] usb 4-1.6: Qualcomm USB modem converter now attached to ttyUSB1

Use static interface numbers taken from the interface map in
qcserial for all Gobi devices instead:

Gobi 1K USB layout:
0: serial port (doesn't respond)
1: serial port (doesn't respond)
2: AT-capable modem port
3: QMI/net

Gobi 2K+ USB layout:
0: QMI/net
1: DM/DIAG (use libqcdm from ModemManager for communication)
2: AT-capable modem port
3: NMEA

This should be more reliable over all, and will also prevent the
noisy "probe failed" messages.  The whitelisting logic is expected
to be replaced by direct interface number matching in 3.6.

Reported-by: Heinrich Siebmanns (Harvey) <H.Siebmanns@t-online.de>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoUSB: qmi_wwan: Add ZTE (Vodafone) K3520-Z
Andrew Bird (Sphere Systems) [Sat, 19 May 2012 22:28:38 +0000]
USB: qmi_wwan: Add ZTE (Vodafone) K3520-Z

commit f7142e6c226076fd40c2ebaad9fb0c9a631b790e upstream.

Signed-off-by: Andrew Bird <ajb@spheresystems.co.uk>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoUSB: qmi_wwan: Make forced int 4 whitelist generic
Andrew Bird (Sphere Systems) [Sat, 19 May 2012 22:28:36 +0000]
USB: qmi_wwan: Make forced int 4 whitelist generic

commit 00001880cd8faaa349fe2ebb158f7e0cd8026048 upstream.

Change the forced interface 4 whitelist to use the generic shared
binder instead of the Gobi specific one. Certain ZTE devices
(K3520-Z & K3765-Z) don't work with the Gobi version, but function
quite happily with the generic. This has been tested with the following
devices:
K3520-Z
K3565-Z
K3765-Z
K4505-Z
It hasn't been tested with the ZTE MF820D, which is the only other
device that uses this whitelist at present. Although Bjorn doesn't
expect any problems, any testing with that device would be appreciated.

Signed-off-by: Andrew Bird <ajb@spheresystems.co.uk>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agocan: flexcan: use be32_to_cpup to handle the value of dt entry
Hui Wang [Wed, 27 Jun 2012 08:19:18 +0000]
can: flexcan: use be32_to_cpup to handle the value of dt entry

commit 85f2f834e85517307f13e30e630a5fc86f757cb5 upstream.

The freescale arm i.MX series platform can support this driver, and
usually the arm cpu works in the little endian mode by default, while
device tree entry value is stored in big endian format, we should use
be32_to_cpup() to handle them, after modification, it can work well
both on the le cpu and be cpu.

Cc: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Hui Wang <jason77.wang@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agocan: c_can: precedence error in c_can_chip_config()
Dan Carpenter [Fri, 15 Jun 2012 00:20:44 +0000]
can: c_can: precedence error in c_can_chip_config()

commit d9cb9bd63eb27ac19f26a8547128c053f43a5da8 upstream.

(CAN_CTRLMODE_LISTENONLY & CAN_CTRLMODE_LOOPBACK) is (0x02 & 0x01) which
is zero so the condition is never true.  The intent here was to test
that both flags were set.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoixgbe: Do not pad FCoE frames as this can cause issues with FCoE DDP
Alexander Duyck [Mon, 25 Jun 2012 21:54:46 +0000]
ixgbe: Do not pad FCoE frames as this can cause issues with FCoE DDP

commit 57efd44c8cad440fb00ef8078cb018ab2f221373 upstream.

FCoE target mode was experiencing issues due to the fact that we were
sending up data frames that were padded to 60 bytes after the DDP logic had
already stripped the frame down to 52 or 56 depending on the use of VLANs.
This was resulting in the FCoE DDP logic having issues since it thought the
frame still had data in it due to the padding.

To resolve this, adding code so that we do not pad FCoE frames prior to
handling them to the stack.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agobatman-adv: only drop packets of known wifi clients
Marek Lindner [Wed, 20 Jun 2012 15:16:05 +0000]
batman-adv: only drop packets of known wifi clients

commit 5870adc68fc39d81089f1e80efdf64b97e5c37a1 upstream.

bug introduced with 59b699cdee039d75915c354da06937102d1f9a84

If the source or destination mac address of an ethernet packet
could not be found in the translation table the packet was
dropped if AP isolation was turned on. This behavior would
make it impossible to send broadcast packets over the mesh as
the broadcast address will never enter the translation table.

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Acked-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agobatman-adv: fix skb->data assignment
Antonio Quartulli [Tue, 19 Jun 2012 09:26:39 +0000]
batman-adv: fix skb->data assignment

commit 2c995ff892313009e336ecc8ec3411022f5b1c39 upstream.

skb_linearize(skb) possibly rearranges the skb internal data and then changes
the skb->data pointer value. For this reason any other pointer in the code that
was assigned skb->data before invoking skb_linearise(skb) must be re-assigned.

In the current tt_query message handling code this is not done and therefore, in
case of skb linearization, the pointer used to handle the packet header ends up
in pointing to free'd memory.

This bug was introduced by a73105b8d4c765d9ebfb664d0a66802127d8e4c7
(batman-adv: improved client announcement mechanism)

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agocfg80211: fix potential deadlock in regulatory
Eliad Peller [Tue, 12 Jun 2012 09:53:13 +0000]
cfg80211: fix potential deadlock in regulatory

commit fe20b39ec32e975f1054c0b7866c873a954adf05 upstream.

reg_timeout_work() calls restore_regulatory_settings() which
takes cfg80211_mutex.

reg_set_request_processed() already holds cfg80211_mutex
before calling cancel_delayed_work_sync(reg_timeout),
so it might deadlock.

Call the async cancel_delayed_work instead, in order
to avoid the potential deadlock.

This is the relevant lockdep warning:

cfg80211: Calling CRDA for country: XX

======================================================
[ INFO: possible circular locking dependency detected ]
3.4.0-rc5-wl+ #26 Not tainted
-------------------------------------------------------
kworker/0:2/1391 is trying to acquire lock:
 (cfg80211_mutex){+.+.+.}, at: [<bf28ae00>] restore_regulatory_settings+0x34/0x418 [cfg80211]

but task is already holding lock:
 ((reg_timeout).work){+.+...}, at: [<c0059e94>] process_one_work+0x1f0/0x480

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #2 ((reg_timeout).work){+.+...}:
       [<c008fd44>] validate_chain+0xb94/0x10f0
       [<c0090b68>] __lock_acquire+0x8c8/0x9b0
       [<c0090d40>] lock_acquire+0xf0/0x114
       [<c005b600>] wait_on_work+0x4c/0x154
       [<c005c000>] __cancel_work_timer+0xd4/0x11c
       [<c005c064>] cancel_delayed_work_sync+0x1c/0x20
       [<bf28b274>] reg_set_request_processed+0x50/0x78 [cfg80211]
       [<bf28bd84>] set_regdom+0x550/0x600 [cfg80211]
       [<bf294cd8>] nl80211_set_reg+0x218/0x258 [cfg80211]
       [<c03c7738>] genl_rcv_msg+0x1a8/0x1e8
       [<c03c6a00>] netlink_rcv_skb+0x5c/0xc0
       [<c03c7584>] genl_rcv+0x28/0x34
       [<c03c6720>] netlink_unicast+0x15c/0x228
       [<c03c6c7c>] netlink_sendmsg+0x218/0x298
       [<c03933c8>] sock_sendmsg+0xa4/0xc0
       [<c039406c>] __sys_sendmsg+0x1e4/0x268
       [<c0394228>] sys_sendmsg+0x4c/0x70
       [<c0013840>] ret_fast_syscall+0x0/0x3c

-> #1 (reg_mutex){+.+.+.}:
       [<c008fd44>] validate_chain+0xb94/0x10f0
       [<c0090b68>] __lock_acquire+0x8c8/0x9b0
       [<c0090d40>] lock_acquire+0xf0/0x114
       [<c04734dc>] mutex_lock_nested+0x48/0x320
       [<bf28b2cc>] reg_todo+0x30/0x538 [cfg80211]
       [<c0059f44>] process_one_work+0x2a0/0x480
       [<c005a4b4>] worker_thread+0x1bc/0x2bc
       [<c0061148>] kthread+0x98/0xa4
       [<c0014af4>] kernel_thread_exit+0x0/0x8

-> #0 (cfg80211_mutex){+.+.+.}:
       [<c008ed58>] print_circular_bug+0x68/0x2cc
       [<c008fb28>] validate_chain+0x978/0x10f0
       [<c0090b68>] __lock_acquire+0x8c8/0x9b0
       [<c0090d40>] lock_acquire+0xf0/0x114
       [<c04734dc>] mutex_lock_nested+0x48/0x320
       [<bf28ae00>] restore_regulatory_settings+0x34/0x418 [cfg80211]
       [<bf28b200>] reg_timeout_work+0x1c/0x20 [cfg80211]
       [<c0059f44>] process_one_work+0x2a0/0x480
       [<c005a4b4>] worker_thread+0x1bc/0x2bc
       [<c0061148>] kthread+0x98/0xa4
       [<c0014af4>] kernel_thread_exit+0x0/0x8

other info that might help us debug this:

Chain exists of:
  cfg80211_mutex --> reg_mutex --> (reg_timeout).work

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock((reg_timeout).work);
                               lock(reg_mutex);
                               lock((reg_timeout).work);
  lock(cfg80211_mutex);

 *** DEADLOCK ***

2 locks held by kworker/0:2/1391:
 #0:  (events){.+.+.+}, at: [<c0059e94>] process_one_work+0x1f0/0x480
 #1:  ((reg_timeout).work){+.+...}, at: [<c0059e94>] process_one_work+0x1f0/0x480

stack backtrace:
[<c001b928>] (unwind_backtrace+0x0/0x12c) from [<c0471d3c>] (dump_stack+0x20/0x24)
[<c0471d3c>] (dump_stack+0x20/0x24) from [<c008ef70>] (print_circular_bug+0x280/0x2cc)
[<c008ef70>] (print_circular_bug+0x280/0x2cc) from [<c008fb28>] (validate_chain+0x978/0x10f0)
[<c008fb28>] (validate_chain+0x978/0x10f0) from [<c0090b68>] (__lock_acquire+0x8c8/0x9b0)
[<c0090b68>] (__lock_acquire+0x8c8/0x9b0) from [<c0090d40>] (lock_acquire+0xf0/0x114)
[<c0090d40>] (lock_acquire+0xf0/0x114) from [<c04734dc>] (mutex_lock_nested+0x48/0x320)
[<c04734dc>] (mutex_lock_nested+0x48/0x320) from [<bf28ae00>] (restore_regulatory_settings+0x34/0x418 [cfg80211])
[<bf28ae00>] (restore_regulatory_settings+0x34/0x418 [cfg80211]) from [<bf28b200>] (reg_timeout_work+0x1c/0x20 [cfg80211])
[<bf28b200>] (reg_timeout_work+0x1c/0x20 [cfg80211]) from [<c0059f44>] (process_one_work+0x2a0/0x480)
[<c0059f44>] (process_one_work+0x2a0/0x480) from [<c005a4b4>] (worker_thread+0x1bc/0x2bc)
[<c005a4b4>] (worker_thread+0x1bc/0x2bc) from [<c0061148>] (kthread+0x98/0xa4)
[<c0061148>] (kthread+0x98/0xa4) from [<c0014af4>] (kernel_thread_exit+0x0/0x8)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agousb-storage: revert commit afff07e61a52 (Add 090c:1000 to unusal-devs)
Alan Stern [Wed, 20 Jun 2012 20:04:30 +0000]
usb-storage: revert commit afff07e61a52 (Add 090c:1000 to unusal-devs)

commit 0070513b5e005161a7a7fd9a3f48f982b41eb094 upstream.

This patch (as1560) reverts commit
afff07e61a5243e14ee3f0a272a0380cd744a8a3 (usb-storage: Add 090c:1000
to unusal-devs).  It is no longer needed, because usb-storage now
tells the sd driver to try READ CAPACITY(10) before READ CAPACITY(16)
for every USB mass-storage device.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Hans de Goede <hdegoede@redhat.com>
CC: Matthew Dharm <mdharm-usb@one-eyed-alien.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoSCSI & usb-storage: add try_rc_10_first flag
Alan Stern [Wed, 20 Jun 2012 20:04:19 +0000]
SCSI & usb-storage: add try_rc_10_first flag

commit 6a0bdffa0073857870a4ed1b4489762146359eb4 upstream.

Several bug reports have been received recently for USB mass-storage
devices that don't handle READ CAPACITY(16) commands properly.  They
report bogus sizes, in some cases becoming unusable as a result.

The bugs were triggered by commit
09b6b51b0b6c1b9bb61815baf205e4d74c89ff04 (SCSI & usb-storage: add
flags for VPD pages and REPORT LUNS), which caused usb-storage to stop
overriding the SCSI level reported by devices.  By default, the sd
driver will try READ CAPACITY(16) first for any device whose level is
above SCSI_SPC_2.

It seems likely that any device large enough to require the use of
READ CAPACITY(16) (i.e., 2 TB or more) would be able to handle READ
CAPACITY(10) commands properly.  Indeed, I don't know of any devices
that don't handle READ CAPACITY(10) properly.

Therefore this patch (as1559) adds a new flag telling the sd driver
to try READ CAPACITY(10) before READ CAPACITY(16), and sets this flag
for every USB mass-storage device.  If a device really is larger than
2 TB, sd will fall back to READ CAPACITY(16) just as it used to.

This fixes Bugzilla #43391.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Hans de Goede <hdegoede@redhat.com>
CC: "James E.J. Bottomley" <JBottomley@parallels.com>
CC: Matthew Dharm <mdharm-usb@one-eyed-alien.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoUSB: CP210x Add 10 Device IDs
Craig Shelley [Tue, 26 Jun 2012 22:20:04 +0000]
USB: CP210x Add 10 Device IDs

commit 3fcc8f96829776cf181918461923d1e3bbb831a2 upstream.

This patch adds 10 device IDs for CP210x based devices from the following manufacturers:
Timewave
Clipsal
Festo
Link Instruments

Signed-off-by: Craig Shelley <craig@microtron.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoUSB: option: Add USB ID for Novatel Ovation MC551
Forest Bond [Fri, 22 Jun 2012 14:30:38 +0000]
USB: option: Add USB ID for Novatel Ovation MC551

commit 065b07e7a14676f4138ce4619d229c0be5a74230 upstream.

This device is also known as the Verizon USB551L.

Signed-off-by: Forest Bond <forest.bond@rapidrollout.com>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoUSB: option: add id for Cellient MEN-200
Dmitry Shmygov [Wed, 20 Jun 2012 11:51:40 +0000]
USB: option: add id for Cellient MEN-200

commit 1e2c4e59d2b8797973471b4a287a43eac12a0f40 upstream.

Add vendor and product ID to option.c driver
for Cellient MEN-200 EVDO Rev.B 450MHz data module.
http://cellient.com

Signed-off-by: Dmitry Shmygov <shmygov@rambler.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agogpiolib: wm8994: Pay attention to the value set when enabling as output
Mark Brown [Sat, 9 Jun 2012 03:07:56 +0000]
gpiolib: wm8994: Pay attention to the value set when enabling as output

commit 8cd578b6e28693f357867a77598a88ef3deb6b39 upstream.

Not paying attention to the value being set is a bad thing because it
means that we'll not set the hardware up to reflect what was requested.
Not setting the hardware up to reflect what was requested means that the
caller won't get the results they wanted.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoclk: fix parent validation in __clk_set_parent()
Rajendra Nayak [Tue, 3 Jul 2012 06:41:41 +0000]
clk: fix parent validation in __clk_set_parent()

commit 863b13271f1608ab3af6f7a371047d9a66693e38 upstream.

The below commit introduced a bug in __clk_set_parent()
which could cause it to *skip* the parent validation
which makes sure the parent passed to the api is a valid
one.

    commit 7975059db572eb47f0fb272a62afeae272a4b209
    Author: Rajendra Nayak <rnayak@ti.com>
    Date:   Wed Jun 6 14:41:31 2012 +0530

        clk: Allow late cache allocation for clk->parents

This was identified by the following compiler warning..

    drivers/clk/clk.c: In function '__clk_set_parent':
    drivers/clk/clk.c:1083:5: warning: 'i' may be used uninitialized in this function [-Wuninitialized]

.. as reported by Marc Kleine-Budde.

There were various options discussed on how to fix this, one
being initing 'i' to clk->num_parents, but the below approach
was found to be more appropriate as it also makes the 'parent
validation' code simpler to read.

Reported-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoclk: Allow late cache allocation for clk->parents
Rajendra Nayak [Wed, 6 Jun 2012 09:11:31 +0000]
clk: Allow late cache allocation for clk->parents

commit 7975059db572eb47f0fb272a62afeae272a4b209 upstream.

Parent clocks for muxes are cached in clk->parents to
avoid frequent lookups, however the cache allocation happens
only during clock registeration and later clk_set_parent()
assumes a cache space available and allocated.

This is not entirely true for platforms which do early clock
registerations wherein the cache allocation using kzalloc
could fail during clock registeration.

Allow cache allocation to happen later as part of clk_set_parent()
to help such cases and avoid crashes assuming a cache being
available.

While here also replace existing kmalloc() with kzalloc()
in the file.

Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoNFS: Force the legacy idmapper to be single threaded
Bryan Schumaker [Wed, 20 Jun 2012 18:35:28 +0000]
NFS: Force the legacy idmapper to be single threaded

commit b1027439dff844675f6c0df97a1b1d190791a699 upstream.

It was initially coded under the assumption that there would only be one
request at a time, so use a lock to enforce this requirement..

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agodmaengine: pl330: dont complete descriptor for cyclic dma
Tushar Behera [Wed, 23 May 2012 11:17:31 +0000]
dmaengine: pl330: dont complete descriptor for cyclic dma

commit 30c1dc0ff30b5552e8af555265dbeac5637cbb48 upstream.

Commit eab215855803 ("dmaengine: pl330: dont complete descriptor for
cyclic dma") wrongly completes descriptor for cyclic dma, hence following
BUG_ON is still hit with cyclic DMA operations.

kernel BUG at drivers/dma/dmaengine.h:53!

Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
Acked-by: Jassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoPM / Sleep: Prevent waiting forever on asynchronous suspend after abort
Mandeep Singh Baines [Sun, 24 Jun 2012 21:31:09 +0000]
PM / Sleep: Prevent waiting forever on asynchronous suspend after abort

commit 1f758b23177d588a71b96ad02990e715949bb82f upstream.

__device_suspend() must always send a completion. Otherwise, parent
devices will wait forever.

Commit 1e2ef05b, "PM: Limit race conditions between runtime PM and
system sleep (v2)", introduced a regression by short-circuiting the
complete_all() for certain error cases.

This patch fixes the bug by always signalling a completion.

Addresses http://crosbug.com/31972

Tested by injecting an abort.

Signed-off-by: Mandeep Singh Baines <msb@chromium.org>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agomm: correctly synchronize rss-counters at exit/exec
Konstantin Khlebnikov [Wed, 20 Jun 2012 19:53:01 +0000]
mm: correctly synchronize rss-counters at exit/exec

commit 4fe7efdbdfb1c7e7a7f31decfd831c0f31d37091 upstream.

do_exit() and exec_mmap() call sync_mm_rss() before mm_release() does
put_user(clear_child_tid) which can update task->rss_stat and thus make
mm->rss_stat inconsistent.  This triggers the "BUG:" printk in check_mm().

Let's fix this bug in the safest way, and optimize/cleanup this later.

Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agostable: Allow merging of backports for serious user-visible performance issues
Mel Gorman [Thu, 21 Jun 2012 10:36:50 +0000]
stable: Allow merging of backports for serious user-visible performance issues

commit eb3979f64d25120d60b9e761a4c58f70b1a02f86 upstream.

Distribution kernel maintainers routinely backport fixes for users that
were deemed important but not "something critical" as defined by the
rules. To users of these kernels they are very serious and failing to fix
them reduces the value of -stable.

The problem is that the patches fixing these issues are often subtle and
prone to regressions in other ways and need greater care and attention.
To combat this, these "serious" backports should have a higher barrier
to entry.

This patch relaxes the rules to allow a distribution maintainer to merge
to -stable a backported patch or small series that fixes a "serious"
user-visible performance issue. They should include additional information on
the user-visible bug affected and a link to the bugzilla entry if available.
The same rules about the patch being already in mainline still apply.

Signed-off-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoumem: fix up unplugging
Tao Guo [Wed, 13 Jun 2012 19:17:21 +0000]
umem: fix up unplugging

commit 32587371ad3db2f9d335de10dbd8cffd4fff5669 upstream.

Fix a regression introduced by 7eaceaccab5f40 ("block: remove per-queue
plugging").  In that patch, Jens removed the whole mm_unplug_device()
function, which used to be the trigger to make umem start to work.

We need to implement unplugging to make umem start to work, or I/O will
never be triggered.

Signed-off-by: Tao Guo <Tao.Guo@emc.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Shaohua Li <shli@kernel.org>
Acked-by: NeilBrown <neilb@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoxen/blkback: Copy id field when doing BLKIF_DISCARD.
Konrad Rzeszutek Wilk [Fri, 25 May 2012 20:11:09 +0000]
xen/blkback: Copy id field when doing BLKIF_DISCARD.

commit 8c9ce606a60e4a0cb447bdc082ce383b96b227b4 upstream.

We weren't copying the id field so when we sent the response
back to the frontend (especially with a 64-bit host and 32-bit
guest), we ended up using a random value. This lead to the
frontend crashing as it would try to pass to __blk_end_request_all
a NULL 'struct request' (b/c it would use the 'id' to find the
proper 'struct request' in its shadow array) and end up crashing:

BUG: unable to handle kernel NULL pointer dereference at 000000e4
IP: [<c0646d4c>] __blk_end_request_all+0xc/0x40
.. snip..
EIP is at __blk_end_request_all+0xc/0x40
.. snip..
 [<ed95db72>] blkif_interrupt+0x172/0x330 [xen_blkfront]

This fixes the bug by passing in the proper id for the response.

Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=824641

Tested-by: William Dauchy <wdauchy@gmail.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoARM: Orion: Fix WDT compile for Dove and MV78xx0
Andrew Lunn [Fri, 29 Jun 2012 07:25:58 +0000]
ARM: Orion: Fix WDT compile for Dove and MV78xx0

commit 1e0c1ce00d83834d03f4d8d039734ca4703298df upstream.

Commit 0fa1f0609a0c1fe8b2be3c0089a2cb48f7fda521 (ARM: Orion: Fix
Virtual/Physical mixup with watchdog) broke the Dove & MV78xx0
build. Although these two SoC don't use the watchdog, the shared
platform code still needs to build. Add the necessary defines.

Reported-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoARM: Orion: Fix Virtual/Physical mixup with watchdog
Andrew Lunn [Fri, 22 Jun 2012 06:54:02 +0000]
ARM: Orion: Fix Virtual/Physical mixup with watchdog

commit 0fa1f0609a0c1fe8b2be3c0089a2cb48f7fda521 upstream.

The orion watchdog is expecting to be passed the physcial address of
the hardware, and will ioremap() it to give a virtual address it will
use as the base address for the hardware. However, when creating the
platform resource record, a virtual address was being used.

Add the necassary #define's so we can pass the physical address as
expected.

Tested on Kirkwood and Orion5x.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoACPI sysfs.c strlen fix
Pavel Vasilyev [Tue, 5 Jun 2012 04:02:05 +0000]
ACPI sysfs.c strlen fix

commit 9f132652d94c96476b0b0a8caf0c10e96ab10fa8 upstream.

Current code is ignoring the last character of "enable" and "disable"
in comparisons.

https://bugzilla.kernel.org/show_bug.cgi?id=33732

Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoACPI, x86: fix Dell M6600 ACPI reboot regression via DMI
Zhang Rui [Mon, 20 Feb 2012 06:20:06 +0000]
ACPI, x86: fix Dell M6600 ACPI reboot regression via DMI

commit 76eb9a30db4bc8fd172f9155247264b5f2686d7b upstream.

Dell Precision M6600 is known to require PCI reboot, so add it to
the reboot blacklist in pci_reboot_dmi_table[].

https://bugzilla.kernel.org/show_bug.cgi?id=42749

cc: x86@kernel.org
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoACPI: Add a quirk for "AMILO PRO V2030" to ignore the timer overriding
Feng Tang [Mon, 4 Jun 2012 07:00:06 +0000]
ACPI: Add a quirk for "AMILO PRO V2030" to ignore the timer overriding

commit f6b54f083cc66cf9b11d2120d8df3c2ad4e0836d upstream.

This is the 2nd part of fix for kernel bugzilla 40002:
    "IRQ 0 assigned to VGA"
https://bugzilla.kernel.org/show_bug.cgi?id=40002

The root cause is the buggy FW, whose ACPI tables assign the GSI 16
to 2 irqs 0 and 16(VGA), and the VGA is the right owner of GSI 16.
So add a quirk to ignore the irq0 overriding GSI 16 for the
FUJITSU SIEMENS AMILO PRO V2030 platform will solve this issue.

Reported-and-tested-by: Szymon Kowalczyk <fazerxlo@o2.pl>
Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoACPI: Remove one board specific WARN when ignoring timer overriding
Feng Tang [Mon, 4 Jun 2012 07:00:05 +0000]
ACPI: Remove one board specific WARN when ignoring timer overriding

commit 7f68b4c2e158019c2ec494b5cfbd9c83b4e5b253 upstream.

Current WARN msg is only for the ati_ixp4x0 board, while this function
is used by mulitple platforms. So this one board specific warning
is not appropriate any more.

Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoACPI: Make acpi_skip_timer_override cover all source_irq==0 cases
Feng Tang [Mon, 4 Jun 2012 07:00:04 +0000]
ACPI: Make acpi_skip_timer_override cover all source_irq==0 cases

commit ae10ccdc3093486f8c2369d227583f9d79f628e5 upstream.

Currently when acpi_skip_timer_override is set, it only cover the
(source_irq == 0 && global_irq == 2) cases. While there is also
platform which need use this option and its global_irq is not 2.
This patch will extend acpi_skip_timer_override to cover all
timer overriding cases as long as the source irq is 0.

This is the first part of a fix to kernel bug bugzilla 40002:
"IRQ 0 assigned to VGA"
https://bugzilla.kernel.org/show_bug.cgi?id=40002

Reported-and-tested-by: Szymon Kowalczyk <fazerxlo@o2.pl>
Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>