7 years agoceph: fix length validation in parse_reply_info()
Xi Wang [Sun, 15 Jan 2012 03:20:59 +0000]
ceph: fix length validation in parse_reply_info()

"len" is read from network and thus needs validation.  Otherwise, given
a bogus "len" value, p+len could be an out-of-bounds pointer, which is
used in further parsing.

Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Sage Weil <sage@newdream.net>

7 years agoceph: initialize client debugfs outside of monc->mutex
Sage Weil [Sat, 14 Jan 2012 06:22:03 +0000]
ceph: initialize client debugfs outside of monc->mutex

Initializing debufs under monc->mutex introduces a lock dependency for
sb->s_type->i_mutex_key, which (combined with several other dependencies)
leads to an annoying lockdep warning.  There's no particular reason to do
the debugfs setup under this lock, so move it out.

It used to be the case that our first monmap could come from the OSD; that
is no longer the case with recent servers, so we will reliably set up the
client entry during the initial authentication.

We don't have to worry about racing with debugfs teardown by
ceph_debugfs_client_cleanup() because ceph_destroy_client() calls
ceph_msgr_flush() first, which will wait for the message dispatch work
to complete (and the debugfs init to complete).

Fixes: #1940
Signed-off-by: Sage Weil <sage@newdream.net>

7 years agoceph: change "ceph.layout" xattr to be "ceph.file.layout"
Alex Elder [Thu, 12 Jan 2012 01:41:01 +0000]
ceph: change "ceph.layout" xattr to be "ceph.file.layout"

The virtual extended attribute named "ceph.layout" is meaningful
only for regular files.  Change its name to be "ceph.file.layout" to
more directly reflect that in the ceph xattr namespace.  Preserve
the old "ceph.layout" name for the time being (until we decide it's
safe to get rid of it entirely).

Add a missing initializer for "readonly" in the terminating entry.

Signed-off-by: Alex Elder <elder@dreamhost.com>
Reviewed-by: Sage Weil <sage@newdream.net>

7 years agoMerge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Linus Torvalds [Thu, 2 Feb 2012 19:19:03 +0000]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/radeon/kms/blit: fix blit copy for very large buffers
  drm/radeon/kms: fix TRAVIS panel setup
  drm/radeon: fix use after free in ATRM bios reading code.
  drm/radeon/kms: Fix device tree linkage of DP i2c buses too
  drm/radeon: Set DESKTOP_HEIGHT register to the framebuffer (not mode) height.
  drm/radeon/kms: disable output polling when suspended
  drm/nv50/pm: signedness bug in nv50_pm_clocks_pre()
  drm/nouveau/gem: fix fence_sync race / oops
  drm/nouveau: fix typo on mxmdcb option
  drm/nouveau/mxm: pretend to succeed, even if we can't shadow the MXM-SIS
  drm/nouveau/disp: check that panel power gpio is enabled at init time

7 years agoMerge branch 'next' of git://git.monstr.eu/linux-2.6-microblaze
Linus Torvalds [Thu, 2 Feb 2012 19:18:18 +0000]
Merge branch 'next' of git://git.monstr.eu/linux-2.6-microblaze

* 'next' of git://git.monstr.eu/linux-2.6-microblaze:
  Revert "microblaze: Add topology init"

7 years agoMerge branches 'core-urgent-for-linus', 'perf-urgent-for-linus', 'sched-urgent-for...
Linus Torvalds [Thu, 2 Feb 2012 19:11:13 +0000]
Merge branches 'core-urgent-for-linus', 'perf-urgent-for-linus', 'sched-urgent-for-linus' and 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  bugs, x86: Fix printk levels for panic, softlockups and stack dumps

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf top: Fix number of samples displayed
  perf tools: Fix strlen() bug in perf_event__synthesize_event_type()
  perf tools: Fix broken build by defining _GNU_SOURCE in Makefile
  x86/dumpstack: Remove unneeded check in dump_trace()
  perf: Fix broken interrupt rate throttling

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/rt: Fix task stack corruption under __ARCH_WANT_INTERRUPTS_ON_CTXSW
  sched: Fix ancient race in do_exit()
  sched/nohz: Fix nohz cpu idle load balancing state with cpu hotplug
  sched/s390: Fix compile error in sched/core.c
  sched: Fix rq->nr_uninterruptible update race

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/reboot: Remove VersaLogic Menlow reboot quirk
  x86/reboot: Skip DMI checks if reboot set by user
  x86: Properly parenthesize cmpxchg() macro arguments

7 years agoARM: 7302/1: Add TLB flushing for both entries in a PMD
Catalin Marinas [Wed, 25 Jan 2012 10:54:22 +0000]
ARM: 7302/1: Add TLB flushing for both entries in a PMD

Linux uses two PMD entries for a PTE with the classic page table format,
covering 2MB range. However, the __pte_free_tlb() function only adds a
single TLB flush corresponding to 1MB range covering 'addr'. On
Cortex-A15, level 1 entries can be cached by the TLB independently of
the level 2 entries and without additional flushing a PMD entry would be
left pointing at the wrong PTE. The patch limits the TLB flushing range
to two 4KB pages around the 1MB boundary within PMD.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

7 years agoARM: 7303/1: perf: add empty NODE event definitions for Cortex-A5 and Cortex-A15
Will Deacon [Wed, 25 Jan 2012 18:36:28 +0000]
ARM: 7303/1: perf: add empty NODE event definitions for Cortex-A5 and Cortex-A15

Commit 89d6c0b5 ("perf, arch: Add generic NODE cache events") added
empty NODE event definitions for the ARM PMU implementations. This was
merged along with Cortex-A5 and Cortex-A15 PMU support, so they missed
out on the original patch.

This patch adds the empty definitions to Cortex-A5 and Cortex-A15.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

7 years agoARM: 7308/1: vfp: flush thread hwstate before copying ptrace registers
Will Deacon [Mon, 30 Jan 2012 19:23:29 +0000]
ARM: 7308/1: vfp: flush thread hwstate before copying ptrace registers

If we are context switched whilst copying into a thread's
vfp_hard_struct then the partial copy may be corrupted by the VFP
context switching code (see "ARM: vfp: flush thread hwstate before
restoring context from sigframe").

This patch updates the ptrace VFP set code so that the thread state is
flushed before the copy, therefore disabling VFP and preventing
corruption from occurring.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

7 years agoARM: 7307/1: vfp: fix ptrace regset modification race
Dave Martin [Mon, 30 Jan 2012 19:22:28 +0000]
ARM: 7307/1: vfp: fix ptrace regset modification race

In a preemptible kernel, vfp_set() can be preempted, causing the
hardware VFP context to be switched while the thread vfp state is
being read and modified.  This leads to a race condition which can
cause the thread vfp state to become corrupted if lazy VFP context
save occurs due to preemption in between the time thread->vfpstate
is read and the time the modified state is written back.

This may occur if preemption occurs during the execution of a
ptrace() call which modifies the VFP register state of a thread.
Such instances should be very rare in most realistic scenarios --
none has been reported, so far as I am aware.  Only uniprocessor
systems should be affected, since VFP context save is not currently
lazy in SMP kernels.

The problem was introduced by my earlier patch migrating to use
regsets to implement ptrace.

This patch does a vfp_sync_hwstate() before reading
thread->vfpstate, to make sure that the thread's VFP state is not
live in the hardware registers while the registers are modified.

Thanks to Will Deacon for spotting this.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: Dave Martin <dave.martin@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

7 years agoARM: 7306/1: vfp: flush thread hwstate before restoring context from sigframe
Will Deacon [Mon, 30 Jan 2012 19:21:42 +0000]
ARM: 7306/1: vfp: flush thread hwstate before restoring context from sigframe

Following execution of a signal handler, we currently restore the VFP
context from the ucontext in the signal frame. This involves copying
from the user stack into the current thread's vfp_hard_struct and then
flushing the new data out to the hardware registers.

This is problematic when using a preemptible kernel because we could be
context switched whilst updating the vfp_hard_struct. If the current
thread has made use of VFP since the last context switch, the VFP
notifier will copy from the hardware registers into the vfp_hard_struct,
overwriting any data that had been partially copied by the signal code.

Disabling preemption across copy_from_user calls is a terrible idea, so
instead we move the VFP thread flush *before* we update the
vfp_hard_struct. Since the flushing is performed lazily, this has the
effect of disabling VFP and clearing the CPU's VFP state pointer,
therefore preventing the thread from being updated with stale data on
the next context switch.

Cc: stable <stable@vger.kernel.org>
Tested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

7 years agoRevert "ARM: 7304/1: ioremap: fix boundary check when reusing static mapping"
Russell King [Sun, 29 Jan 2012 14:55:21 +0000]
Revert "ARM: 7304/1: ioremap: fix boundary check when reusing static mapping"

This reverts commit 3c424f359898aff48c3d5bed608ac706f8a528c3.

Joachim Eastwood reports:
| "ARM: 7304/1: ioremap: fix boundary check when reusing static mapping"
| Commit: 3c424f359898aff48c3d5bed608ac706f8a528c3 in Linus master
| Breaks booting on my custom AT91RM9200 board.
| There isn't any error messages or anything that indicates what goes
| wrong it just stops after; Uncompressing Linux... done, booting the
| kernel.
| Reverting it makes my board boot again.

and further debugging reveals:

ioremap: pfn=fffff phys=fffff000 offset=400 size=1000
ioremap: area c3ffdfc0: phys_addr=200000 pfn=200 size=4000
ioremap: found: addr fef74000 => fed73000 => fed73400

Clearly, an area for pfn 0x200, 16K can't ever satisfy a request for pfn
0xfffff.  This happens because the changed if statement becomes:

                if (0x00200 > 0xfffff ||
                    0xfffff000 + 0x400 + 0x1000-1 > 0x00200000 + 0x4000-1)
and therefore:
                if (0x00200 > 0xfffff ||
                    0x000003ff > 0x00203fff)

The if condition fails, and so we _believe_ that the SRAM mapping fits
our request.  Clearly that's totally bogus.

Moreover, the original premise of the 'fix' patch was wrong:
|    The condition checking boundaries of the requested and existing
|    mappings didn't take in-page offset into consideration though,
|    which lead to obscure and hard to debug problems when requested
|    mapping crossed end of the static one.

as the code immediately above this loop does:

        size = PAGE_ALIGN(offset + size);

so 'size' already contains the requested offset into the page.

So, revert the broken 'fix'.

Acked-by: Nicolas Pitre <nico@linaro.org>

7 years agodrm/radeon/kms/blit: fix blit copy for very large buffers
Ilija Hadzic [Thu, 2 Feb 2012 15:26:24 +0000]
drm/radeon/kms/blit: fix blit copy for very large buffers

Evergreen and NI blit copy was broken if the buffer maps to a rectangle
whose one dimension is 16384 (max dimension allowed by these chips).
In the mainline kernel, the problem is exposed only when buffers are
very large (1G), but it's still a problem. The problem could be exposed
for smaller buffers if anyone modifies the algorithm for rectangle
construction in r600_blit_create_rect() (the reason why someone would
modify that algorithm is to tune the performance of buffer moves).

The root cause was in i2f() function which only operated on range between
0 and 16383. Fix this by extending the range of i2f() function to 0 to

While at it improve the function so that the range can be easily
extended in the future (if it becomes necessary), cleanup lines
over 80 characters, and replace in-line comments with one strategic
comment that explains the crux of the function.

Credits to michel@daenzer.net for pointing out the root cause of
the bug.

v2: Fix I2F_MAX_INPUT constant definition goof and warn only once
    if input argument is out of range. Edit the comment a little
    bit to avoid some linguistic confusion and make it look better
    in general.

Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Michel Dänzer <michel@daenzer.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>

7 years agodrm/radeon/kms: fix TRAVIS panel setup
Alex Deucher [Thu, 2 Feb 2012 15:18:00 +0000]
drm/radeon/kms: fix TRAVIS panel setup

Different versions of the DP to LVDS bridge chip
need different panel mode settings depending on
the chip version used.


Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

7 years agodrm/radeon: fix use after free in ATRM bios reading code.
Dave Airlie [Thu, 2 Feb 2012 15:25:16 +0000]
drm/radeon: fix use after free in ATRM bios reading code.


Reported-and-Debugged-by: mlambda@gmail.com
Signed-off-by: Dave Airlie <airlied@redhat.com>

7 years agoHID: hyperv: Properly disconnect the input device
K. Y. Srinivasan [Wed, 18 Jan 2012 16:57:14 +0000]
HID: hyperv: Properly disconnect the input device

When we unload the mouse driver, properly disconnect the input device.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reported-by: Fuzhou Chen <fuzhouch@microsoft.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

7 years agoALSA: hda - Disable dynamic-power control for VIA as default
Takashi Iwai [Thu, 2 Feb 2012 09:30:17 +0000]
ALSA: hda - Disable dynamic-power control for VIA as default

Since the dynamic pin power-control and the analog low-current mode
may lead to pop-noise, it's safer to set it off as default.

Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=741128

Cc: <stable@kernel.org> [v3.1+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>

7 years agoALSA: hda - Allow analog low-current mode when dynamic power-control is on
Takashi Iwai [Wed, 1 Feb 2012 09:33:23 +0000]
ALSA: hda - Allow analog low-current mode when dynamic power-control is on

VIA codecs have several different power-saving features, and one of
them is the analog low-current mode.  But it turned out that the ALC
mode causes pop-noises at each on/off time on some machines.  As a
quick workaround, disable the ALC when another power-saving feature,
the dynamic pin power-control, is turned off, too, since the dynamic
power-control is already exposed as a mixer enum element so that user
can turn it on/off freely.

Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=741128

Cc: <stable@kernel.org> [v3.1+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>

7 years agoALSA: hda - Fix the logic to detect VIA analog low-current mode
Takashi Iwai [Tue, 24 Jan 2012 12:58:36 +0000]
ALSA: hda - Fix the logic to detect VIA analog low-current mode

The analog low-current mode must be enabled when the no stream is
running but the current detection checks it in a wrong way.

Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=741128

Cc: <stable@kernel.org> [v3.1+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>

7 years agoALSA: hda - Check power-state before changing in patch_via.c
Takashi Iwai [Tue, 24 Jan 2012 11:25:50 +0000]
ALSA: hda - Check power-state before changing in patch_via.c

Instead of always writing AC_VERB_SET_POWER_STATE, check the current
power-state and don't write again if the value is already set.
This may reduce the click noise upon the dynamic power-state change
(e.g. in analog-input mixer).

Signed-off-by: Takashi Iwai <tiwai@suse.de>

7 years agoHID: usbhid: fix dead lock between open and disconect
Ming Lei [Thu, 12 Jan 2012 09:42:22 +0000]
HID: usbhid: fix dead lock between open and disconect

There is no reason to hold hiddev->existancelock before
calling usb_deregister_dev, so move it out of the lock.

The patch fixes the lockdep warning below.

[ 5733.386271] ======================================================
[ 5733.386274] [ INFO: possible circular locking dependency detected ]
[ 5733.386278] 3.2.0-custom-next-20120111+ #1 Not tainted
[ 5733.386281] -------------------------------------------------------
[ 5733.386284] khubd/186 is trying to acquire lock:
[ 5733.386288]  (minor_rwsem){++++.+}, at: [<ffffffffa0011a04>] usb_deregister_dev+0x37/0x9e [usbcore]
[ 5733.386311]
[ 5733.386312] but task is already holding lock:
[ 5733.386315]  (&hiddev->existancelock){+.+...}, at: [<ffffffffa0094d17>] hiddev_disconnect+0x26/0x87 [usbhid]
[ 5733.386328]
[ 5733.386329] which lock already depends on the new lock.
[ 5733.386330]
[ 5733.386333]
[ 5733.386334] the existing dependency chain (in reverse order) is:
[ 5733.386336]
[ 5733.386337] -> #1 (&hiddev->existancelock){+.+...}:
[ 5733.386346]        [<ffffffff81082d26>] lock_acquire+0xcb/0x10e
[ 5733.386357]        [<ffffffff813df961>] __mutex_lock_common+0x60/0x465
[ 5733.386366]        [<ffffffff813dfe4d>] mutex_lock_nested+0x36/0x3b
[ 5733.386371]        [<ffffffffa0094ad6>] hiddev_open+0x113/0x193 [usbhid]
[ 5733.386378]        [<ffffffffa0011971>] usb_open+0x66/0xc2 [usbcore]
[ 5733.386390]        [<ffffffff8111a8b5>] chrdev_open+0x12b/0x154
[ 5733.386402]        [<ffffffff811159a8>] __dentry_open.isra.16+0x20b/0x355
[ 5733.386408]        [<ffffffff811165dc>] nameidata_to_filp+0x43/0x4a
[ 5733.386413]        [<ffffffff81122ed5>] do_last+0x536/0x570
[ 5733.386419]        [<ffffffff8112300b>] path_openat+0xce/0x301
[ 5733.386423]        [<ffffffff81123327>] do_filp_open+0x33/0x81
[ 5733.386427]        [<ffffffff8111664d>] do_sys_open+0x6a/0xfc
[ 5733.386431]        [<ffffffff811166fb>] sys_open+0x1c/0x1e
[ 5733.386434]        [<ffffffff813e7c79>] system_call_fastpath+0x16/0x1b
[ 5733.386441]
[ 5733.386441] -> #0 (minor_rwsem){++++.+}:
[ 5733.386448]        [<ffffffff8108255d>] __lock_acquire+0xa80/0xd74
[ 5733.386454]        [<ffffffff81082d26>] lock_acquire+0xcb/0x10e
[ 5733.386458]        [<ffffffff813e01f5>] down_write+0x44/0x77
[ 5733.386464]        [<ffffffffa0011a04>] usb_deregister_dev+0x37/0x9e [usbcore]
[ 5733.386475]        [<ffffffffa0094d2d>] hiddev_disconnect+0x3c/0x87 [usbhid]
[ 5733.386483]        [<ffffffff8132df51>] hid_disconnect+0x3f/0x54
[ 5733.386491]        [<ffffffff8132dfb4>] hid_device_remove+0x4e/0x7a
[ 5733.386496]        [<ffffffff812c0957>] __device_release_driver+0x81/0xcd
[ 5733.386502]        [<ffffffff812c09c3>] device_release_driver+0x20/0x2d
[ 5733.386507]        [<ffffffff812c0564>] bus_remove_device+0x114/0x128
[ 5733.386512]        [<ffffffff812bdd6f>] device_del+0x131/0x183
[ 5733.386519]        [<ffffffff8132def3>] hid_destroy_device+0x1e/0x3d
[ 5733.386525]        [<ffffffffa00916b0>] usbhid_disconnect+0x36/0x42 [usbhid]
[ 5733.386530]        [<ffffffffa000fb60>] usb_unbind_interface+0x57/0x11f [usbcore]
[ 5733.386542]        [<ffffffff812c0957>] __device_release_driver+0x81/0xcd
[ 5733.386547]        [<ffffffff812c09c3>] device_release_driver+0x20/0x2d
[ 5733.386552]        [<ffffffff812c0564>] bus_remove_device+0x114/0x128
[ 5733.386557]        [<ffffffff812bdd6f>] device_del+0x131/0x183
[ 5733.386562]        [<ffffffffa000de61>] usb_disable_device+0xa8/0x1d8 [usbcore]
[ 5733.386573]        [<ffffffffa0006bd2>] usb_disconnect+0xab/0x11f [usbcore]
[ 5733.386583]        [<ffffffffa0008aa0>] hub_thread+0x73b/0x1157 [usbcore]
[ 5733.386593]        [<ffffffff8105dc0f>] kthread+0x95/0x9d
[ 5733.386601]        [<ffffffff813e90b4>] kernel_thread_helper+0x4/0x10
[ 5733.386607]
[ 5733.386608] other info that might help us debug this:
[ 5733.386609]
[ 5733.386612]  Possible unsafe locking scenario:
[ 5733.386613]
[ 5733.386615]        CPU0                    CPU1
[ 5733.386618]        ----                    ----
[ 5733.386620]   lock(&hiddev->existancelock);
[ 5733.386625]                                lock(minor_rwsem);
[ 5733.386630]                                lock(&hiddev->existancelock);
[ 5733.386635]   lock(minor_rwsem);
[ 5733.386639]
[ 5733.386640]  *** DEADLOCK ***
[ 5733.386641]
[ 5733.386644] 6 locks held by khubd/186:
[ 5733.386646]  #0:  (&__lockdep_no_validate__){......}, at: [<ffffffffa00084af>] hub_thread+0x14a/0x1157 [usbcore]
[ 5733.386661]  #1:  (&__lockdep_no_validate__){......}, at: [<ffffffffa0006b77>] usb_disconnect+0x50/0x11f [usbcore]
[ 5733.386677]  #2:  (hcd->bandwidth_mutex){+.+.+.}, at: [<ffffffffa0006bc8>] usb_disconnect+0xa1/0x11f [usbcore]
[ 5733.386693]  #3:  (&__lockdep_no_validate__){......}, at: [<ffffffff812c09bb>] device_release_driver+0x18/0x2d
[ 5733.386704]  #4:  (&__lockdep_no_validate__){......}, at: [<ffffffff812c09bb>] device_release_driver+0x18/0x2d
[ 5733.386714]  #5:  (&hiddev->existancelock){+.+...}, at: [<ffffffffa0094d17>] hiddev_disconnect+0x26/0x87 [usbhid]
[ 5733.386727]
[ 5733.386727] stack backtrace:
[ 5733.386731] Pid: 186, comm: khubd Not tainted 3.2.0-custom-next-20120111+ #1
[ 5733.386734] Call Trace:
[ 5733.386741]  [<ffffffff81062881>] ? up+0x34/0x3b
[ 5733.386747]  [<ffffffff813d9ef3>] print_circular_bug+0x1f8/0x209
[ 5733.386752]  [<ffffffff8108255d>] __lock_acquire+0xa80/0xd74
[ 5733.386756]  [<ffffffff810808b4>] ? trace_hardirqs_on_caller+0x15d/0x1a3
[ 5733.386763]  [<ffffffff81043a3f>] ? vprintk+0x3f4/0x419
[ 5733.386774]  [<ffffffffa0011a04>] ? usb_deregister_dev+0x37/0x9e [usbcore]
[ 5733.386779]  [<ffffffff81082d26>] lock_acquire+0xcb/0x10e
[ 5733.386789]  [<ffffffffa0011a04>] ? usb_deregister_dev+0x37/0x9e [usbcore]
[ 5733.386797]  [<ffffffff813e01f5>] down_write+0x44/0x77
[ 5733.386807]  [<ffffffffa0011a04>] ? usb_deregister_dev+0x37/0x9e [usbcore]
[ 5733.386818]  [<ffffffffa0011a04>] usb_deregister_dev+0x37/0x9e [usbcore]
[ 5733.386825]  [<ffffffffa0094d2d>] hiddev_disconnect+0x3c/0x87 [usbhid]
[ 5733.386830]  [<ffffffff8132df51>] hid_disconnect+0x3f/0x54
[ 5733.386834]  [<ffffffff8132dfb4>] hid_device_remove+0x4e/0x7a
[ 5733.386839]  [<ffffffff812c0957>] __device_release_driver+0x81/0xcd
[ 5733.386844]  [<ffffffff812c09c3>] device_release_driver+0x20/0x2d
[ 5733.386848]  [<ffffffff812c0564>] bus_remove_device+0x114/0x128
[ 5733.386854]  [<ffffffff812bdd6f>] device_del+0x131/0x183
[ 5733.386859]  [<ffffffff8132def3>] hid_destroy_device+0x1e/0x3d
[ 5733.386865]  [<ffffffffa00916b0>] usbhid_disconnect+0x36/0x42 [usbhid]
[ 5733.386876]  [<ffffffffa000fb60>] usb_unbind_interface+0x57/0x11f [usbcore]
[ 5733.386882]  [<ffffffff812c0957>] __device_release_driver+0x81/0xcd
[ 5733.386886]  [<ffffffff812c09c3>] device_release_driver+0x20/0x2d
[ 5733.386890]  [<ffffffff812c0564>] bus_remove_device+0x114/0x128
[ 5733.386895]  [<ffffffff812bdd6f>] device_del+0x131/0x183
[ 5733.386905]  [<ffffffffa000de61>] usb_disable_device+0xa8/0x1d8 [usbcore]
[ 5733.386916]  [<ffffffffa0006bd2>] usb_disconnect+0xab/0x11f [usbcore]
[ 5733.386921]  [<ffffffff813dff82>] ? __mutex_unlock_slowpath+0x130/0x141
[ 5733.386929]  [<ffffffffa0008aa0>] hub_thread+0x73b/0x1157 [usbcore]
[ 5733.386935]  [<ffffffff8106a51d>] ? finish_task_switch+0x78/0x150
[ 5733.386941]  [<ffffffff8105e396>] ? __init_waitqueue_head+0x4c/0x4c
[ 5733.386950]  [<ffffffffa0008365>] ? usb_remote_wakeup+0x56/0x56 [usbcore]
[ 5733.386955]  [<ffffffff8105dc0f>] kthread+0x95/0x9d
[ 5733.386961]  [<ffffffff813e90b4>] kernel_thread_helper+0x4/0x10
[ 5733.386966]  [<ffffffff813e24b8>] ? retint_restore_args+0x13/0x13
[ 5733.386970]  [<ffffffff8105db7a>] ? __init_kthread_worker+0x55/0x55
[ 5733.386974]  [<ffffffff813e90b0>] ? gs_change+0x13/0x13

Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

7 years agoi.MX SDMA: Fix burstsize settings
Philippe Rétornaz [Tue, 24 Jan 2012 13:22:01 +0000]
i.MX SDMA: Fix burstsize settings

Commit 6584cb88 (ARM i.MX dma: Fix burstsize settings) fixed
the mxcmmc driver but forgot to fix the SDMA driver to handle the
correct burtsize.
This make the SD card access works again with DMA on i.MX31 boards.

Signed-off-by: Philippe Rétornaz <philippe.retornaz@epfl.ch>
Tested-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>

7 years agogpio: Add missing spin_lock_init in gpio-ml-ioh driver
Axel Lin [Wed, 1 Feb 2012 02:50:05 +0000]
gpio: Add missing spin_lock_init in gpio-ml-ioh driver

This bug was introduced by commit 54be5663
"gpio-ml-ioh: Support interrupt function" which adds a spinlock to struct
ioh_gpio but never init the spinlock.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

7 years agogpio: Add missing spin_lock_init in gpio-pch driver
Axel Lin [Wed, 1 Feb 2012 02:51:53 +0000]
gpio: Add missing spin_lock_init in gpio-pch driver

This bug was introduced by commit d568a681
"gpio-pch: add spinlock in suspend/resume processing"
which adds a spinlock to struct pch_gpio but never init the spinlock.

Reported-by: Tomoya MORINAGA <tomoya.rohm@gmail.com>
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

7 years agoMerge tag 'firewire-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394...
Linus Torvalds [Thu, 2 Feb 2012 02:30:15 +0000]
Merge tag 'firewire-fixes' of git://git./linux/kernel/git/ieee1394/linux1394

firewire fixes post v3.3-rc1

Add workarounds table entries for hardware bugs in
  - FireWire part of Sound Blaster Audigy cards,
  - Ricoh PCIe 1394 controllers.
Without these, several protocols, e.g. AV/C, do not work on the
Audigy, and the Ricoh PCIe controllers wouldn't work at all.
This does not concern the older Ricoh PCI controllers.

* tag 'firewire-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
  firewire: ohci: disable MSI on Ricoh controllers
  firewire: ohci: add reset packet quirk for SB Audigy

7 years agostaging: fix go7007-usb license
Randy Dunlap [Thu, 2 Feb 2012 03:04:02 +0000]
staging: fix go7007-usb license

Add MODULE_LICENSE() as per the license in the comment at the top of the
file for this source module to fix build warning:

  WARNING: modpost: missing MODULE_LICENSE() in drivers/staging/media/go7007/go7007-usb.o
  see include/linux/module.h for more information

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: Ross Cohen <rcohen@snurgle.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agodocbook: fix fatal errors in device-drivers docbook and add DMA Management section
Randy Dunlap [Thu, 2 Feb 2012 02:15:49 +0000]
docbook: fix fatal errors in device-drivers docbook and add DMA Management section

Fix 2 fatal errors in the device-drivers docbook.
Also add some missing files from drivers/base/; since several
of these are DMA-related, add a section for DMA Management.

docproc: drivers/base/sys.c: No such file or directory
docproc: drivers/tty/serial/8250.c: No such file or directory

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agogpio: samsung: adapt to changes in gpio specifier translator function declaration
Thomas Abraham [Wed, 1 Feb 2012 13:02:32 +0000]
gpio: samsung: adapt to changes in gpio specifier translator function declaration

Commit 15c9a0acc3f7 (of: create of_phandle_args to simplify return of phandle
parsing data) modifies the parameter list of of_xlate function pointer declaration
in gpio_chip. Adapt the gpio specifier translate function for this change.

Reported-by: Tushar Behera <tushar.behera@linaro.org>
Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org>
Tested-by: Karol Lewandowski <k.lewandowsk@samsung.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

7 years agoMerge branch 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris...
Linus Torvalds [Thu, 2 Feb 2012 00:00:38 +0000]
Merge branch 'for-linus2' of git://git./linux/kernel/git/jmorris/linux-security

* 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  lib: Fix 32-bit sparc udiv_qrnnd() definition in mpilib's longlong.h
  lib: Fix multiple definitions of clz_tab
  lib/digsig: checks for NULL return value
  lib/mpi: added missing NULL check
  lib/mpi: added comment on divide by 0 case
  lib/mpi: check for possible zero length
  lib/digsig: pkcs_1_v1_5_decode_emsa cleanup
  lib/digsig: additional sanity checks against badly formated key payload
  lib/mpi: removed unused functions
  lib/mpi: checks for zero divisor length
  lib/mpi: return error code on dividing by zero
  lib/mpi: replaced MPI_NULL with normal NULL
  lib/mpi: added missing NULL check

7 years agoASoC: wm_hubs: Correct line input to line output 2 paths
Mark Brown [Wed, 1 Feb 2012 23:46:58 +0000]
ASoC: wm_hubs: Correct line input to line output 2 paths

The second line output mixer has the controls for the line input bypasses
in the opposite order.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@vger.kernel.org

7 years agolib: Fix 32-bit sparc udiv_qrnnd() definition in mpilib's longlong.h
David Miller [Wed, 1 Feb 2012 22:17:55 +0000]
lib: Fix 32-bit sparc udiv_qrnnd() definition in mpilib's longlong.h

This copy of longlong.h is extremely dated and results in compile
errors on sparc32 when MPILIB is enabled, copy over the more uptodate
implementation from arch/sparc/math/sfp-util_32.h

Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: James Morris <jmorris@namei.org>

7 years agolib: Fix multiple definitions of clz_tab
David Miller [Wed, 1 Feb 2012 22:17:54 +0000]
lib: Fix multiple definitions of clz_tab

Both sparc 32-bit's software divide assembler and MPILIB provide
clz_tab[] with identical contents.

Break it out into a seperate object file and select it when
SPARC32 or MPILIB is set.

Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: James Morris <jmorris@namei.org>

7 years agoMerge tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland...
Linus Torvalds [Wed, 1 Feb 2012 23:18:39 +0000]
Merge tag 'rdma-for-linus' of git://git./linux/kernel/git/roland/infiniband

InfiniBand/RDMA fixes for 3.3:

 - Fix a crash due to a regression (uninitialized refcnt) introduced in
   3.2 with XRC support.
 - Close race in how ucma reports events when connect fails.
 - Process vendor-specific MADs in mlx4 so that eg FDR-10 data rate works.
 - Fix regression in qib caused by over-aggressive PCIe tuning.
 - Other small fixes for hardware drivers (ipath, nes, qib).

* tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  RDMA/nes: Copyright update
  IB/mlx4: pass SMP vendor-specific attribute MADs to firmware
  RDMA/nes: Fix fast memory registration opcode
  RDMA/nes: Fix fast memory registration length
  RDMA/ucma: Discard all events for new connections until accepted
  IB/qib: Roll back PCIe tuning change
  IB/qib: Use GFP_ATOMIC when locks are held
  RDMA/nes: Add missing rcu_read_unlock() in nes_addr_resolve_neigh()
  RDMA/nes: Fix for sending MPA reject frame
  IB/ipath: Calling PTR_ERR() on right variable in create_file()
  RDMA/core: Fix kernel panic by always initializing qp->usecnt

7 years agoproc: make sure mem_open() doesn't pin the target's memory
Oleg Nesterov [Tue, 31 Jan 2012 16:15:11 +0000]
proc: make sure mem_open() doesn't pin the target's memory

Once /proc/pid/mem is opened, the memory can't be released until
mem_release() even if its owner exits.

Change mem_open() to do atomic_inc(mm_count) + mmput(), this only
pins mm_struct. Change mem_rw() to do atomic_inc_not_zero(mm_count)
before access_remote_vm(), this verifies that this mm is still alive.

I am not sure what should mem_rw() return if atomic_inc_not_zero()
fails. With this patch it returns zero to match the "mm == NULL" case,
may be it should return -EINVAL like it did before e268337d.

Perhaps it makes sense to add the additional fatal_signal_pending()
check into the main loop, to ensure we do not hold this memory if
the target task was oom-killed.

Cc: stable@kernel.org
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoproc: unify mem_read() and mem_write()
Oleg Nesterov [Tue, 31 Jan 2012 16:14:54 +0000]
proc: unify mem_read() and mem_write()

No functional changes, cleanup and preparation.

mem_read() and mem_write() are very similar. Move this code into the
new common helper, mem_rw(), which takes the additional "int write"

Cc: stable@kernel.org
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoproc: mem_release() should check mm != NULL
Oleg Nesterov [Tue, 31 Jan 2012 16:14:38 +0000]
proc: mem_release() should check mm != NULL

mem_release() can hit mm == NULL, add the necessary check.

Cc: stable@kernel.org
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoPM / Hibernate: Thaw kernel threads in SNAPSHOT_CREATE_IMAGE ioctl path
Srivatsa S. Bhat [Wed, 1 Feb 2012 21:16:36 +0000]
PM / Hibernate: Thaw kernel threads in SNAPSHOT_CREATE_IMAGE ioctl path

In the SNAPSHOT_CREATE_IMAGE ioctl, if the call to hibernation_snapshot()
fails, the frozen tasks are not thawed.

And in the case of success, if we happen to exit due to a successful freezer
test, all tasks (including those of userspace) are thawed, whereas actually
we should have thawed only the kernel threads at that point. Fix both these

Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: stable@vger.kernel.org

7 years agoMAINTAINERS: Greg's suse email address is dead
Greg KH [Wed, 1 Feb 2012 04:02:00 +0000]
MAINTAINERS: Greg's suse email address is dead

My email address has changed, the suse.de one is now dead, so update all
of my MAINTAINER entries with the correct one so that patches don't get

Also change the status of some of my entries as I'm supposed to be doing
this stuff now for real.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agomtd: fix merge conflict resolution breakage
Artem Bityutskiy [Wed, 1 Feb 2012 19:10:24 +0000]
mtd: fix merge conflict resolution breakage

This patch fixes merge conflict resolution breakage introduced by merge
d3712b9dfcf4 ("Merge tag 'for-linus' of git://github.com/prasad-joshi/logfs_upstream").

The commit changed 'mtd_can_have_bb()' function and made it always
return zero, which is incorrect.  Instead, we need it to return whether
the underlying flash device can have bad eraseblocks or not.  UBI needs
this information because it affects how it handles the underlying flash.
E.g., if the underlying flash is NOR, it cannot have bad blocks and any
write or erase error is fatal, and all we can do is to switch to R/O
mode.  We do not need to reserve a pool of good eraseblocks for bad
eraseblocks handling, and so on.

This patch also removes 'mtd_can_have_bb()' invocations from Logfs to
ensure correct Logfs behavior.

I've tested that with this patch UBI works on top of NOR and NAND
flashes emulated by mtdram and nandsim correspondingly.

This patch is based on patch from Linus Torvalds.

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Acked-by: Jörn Engel <joern@logfs.org>
Acked-by: Prasad Joshi <prasadjoshi.linux@gmail.com>
Acked-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoInput: serio_raw - return proper result when serio_raw_read fails
Che-Liang Chiou [Wed, 1 Feb 2012 17:25:35 +0000]
Input: serio_raw - return proper result when serio_raw_read fails

serio_raw_read now returns (sometimes partially) successful number of
bytes transferred to the caller, and only returns error code to the
caller on completely failed transfers.

Signed-off-by: Che-Liang Chiou <clchiou@chromium.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

7 years agoInput: document device properties
Henrik Rydberg [Wed, 1 Feb 2012 17:12:24 +0000]
Input: document device properties

Add a section which defines the input device properties and provides
guidelines on how to use them.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Jussi Pakkanen <jussi.pakkanen@canonical.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

7 years agoInput: twl4030_keypad - fix comment (trivial)
Felipe Contreras [Wed, 1 Feb 2012 17:12:23 +0000]
Input: twl4030_keypad - fix comment (trivial)

And trivial whitespace fixes.

Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

7 years agoInput: gpio_keys - fix struct device declared inside parameter list
Heiko Stübner [Wed, 1 Feb 2012 17:12:24 +0000]
Input: gpio_keys - fix struct device declared inside parameter list

A struct device parameter is used in the enable and disable callbacks to
distinguish between different gpio_keys devices.

Platforms that don't use these callbacks may not include struct device
at all, as seen on arch/arm/mach-s3c2410/mach-n30.c

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

7 years agoInput: evdev - fix variable initialisation
Heiko Stübner [Wed, 1 Feb 2012 17:12:23 +0000]
Input: evdev - fix variable initialisation

Commit 509f87c5f564 (evdev - do not block waiting for an event if fd
is nonblock) created a code path were it was possible to use retval

This could lead to the xorg evdev input driver getting corrupt data
and refusing to work with log messages like
AUO-Pixcir touchscreen: Read error: Success
sg060_keys: Read error: Success
AUO-Pixcir touchscreen: Read error: Success
sg060_keys: Read error: Success
(for drivers auo-pixcir-ts and gpio-keys).

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Dima Zavin <dima@android.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

7 years agoARM: mach-shmobile: both USB DMAC instances on sh7372 are slave-only
Guennadi Liakhovetski [Wed, 18 Jan 2012 09:14:29 +0000]
ARM: mach-shmobile: both USB DMAC instances on sh7372 are slave-only

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>

7 years agodma: sh_dma: not all SH DMAC implementations support MEMCPY
Guennadi Liakhovetski [Wed, 18 Jan 2012 09:14:25 +0000]
dma: sh_dma: not all SH DMAC implementations support MEMCPY

Add a flag to allow platforms to specify, whether a DMAC instance supports
the MEMCPY operation. To avoid regressions, preserve the current default.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>

7 years agodrm/radeon/kms: Fix device tree linkage of DP i2c buses too
Jean Delvare [Tue, 31 Jan 2012 08:55:21 +0000]
drm/radeon/kms: Fix device tree linkage of DP i2c buses too

Properly set the parent device of DP i2c buses before registering them

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

7 years agodrm/radeon: Set DESKTOP_HEIGHT register to the framebuffer (not mode) height.
Michel Dänzer [Wed, 1 Feb 2012 11:09:55 +0000]
drm/radeon: Set DESKTOP_HEIGHT register to the framebuffer (not mode) height.

The value of this register is transferred to the V_COUNTER register at the
beginning of vertical blank. V_COUNTER is the reference for VLINE waits and
so if VIEWPORT_Y_START is not 0, V_COUNTER actually went backwards at the
beginning of vertical blank, and VLINE waits excluding the whole scanout area
could never finish (possibly only if VIEWPORT_Y_START is larger than the length
of vertical blank in scanlines). Setting DESKTOP_HEIGHT to the framebuffer
height should prevent this for any kind of VLINE wait.

Fixes https://bugs.freedesktop.org/show_bug.cgi?id=45329 .

CC: stable@vger.kernel.org
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

7 years agodrm/radeon/kms: disable output polling when suspended
Seth Forshee [Wed, 1 Feb 2012 01:06:25 +0000]
drm/radeon/kms: disable output polling when suspended

Polling the outputs when the device is suspended can result in erroneous
status updates. Disable output polling during suspend to prevent this
from happening.

Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

7 years agolib/digsig: checks for NULL return value
Dmitry Kasatkin [Thu, 26 Jan 2012 17:13:24 +0000]
lib/digsig: checks for NULL return value

mpi_read_from_buffer() return value must not be NULL.

Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Reviewed-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: James Morris <jmorris@namei.org>

7 years agolib/mpi: added missing NULL check
Dmitry Kasatkin [Thu, 26 Jan 2012 17:13:18 +0000]
lib/mpi: added missing NULL check

Added missing NULL check after mpi_alloc_limb_space().

Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Reviewed-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: James Morris <jmorris@namei.org>

7 years agolib/mpi: added comment on divide by 0 case
Dmitry Kasatkin [Thu, 26 Jan 2012 17:13:20 +0000]
lib/mpi: added comment on divide by 0 case

Comment explains that existing clients do not call this function
with dsize == 0, which means that 1/0 should not happen.

Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Reviewed-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: James Morris <jmorris@namei.org>

7 years agolib/mpi: check for possible zero length
Dmitry Kasatkin [Thu, 26 Jan 2012 17:13:19 +0000]
lib/mpi: check for possible zero length

Buggy client might pass zero nlimbs which is meaningless.
Added check for zero length.

Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Reviewed-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: James Morris <jmorris@namei.org>

7 years agolib/digsig: pkcs_1_v1_5_decode_emsa cleanup
Dmitry Kasatkin [Thu, 26 Jan 2012 17:13:26 +0000]
lib/digsig: pkcs_1_v1_5_decode_emsa cleanup

Removed useless 'is_valid' variable in pkcs_1_v1_5_decode_emsa(),
which was inhereted from original code. Client now uses return value
to check for an error.

Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Reviewed-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: James Morris <jmorris@namei.org>

7 years agolib/digsig: additional sanity checks against badly formated key payload
Dmitry Kasatkin [Thu, 26 Jan 2012 17:13:25 +0000]
lib/digsig: additional sanity checks against badly formated key payload

Added sanity checks for possible wrongly formatted key payload data:
- minimum key payload size
- zero modulus length
- corrected upper key payload boundary.

Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Reviewed-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: James Morris <jmorris@namei.org>

7 years agolib/mpi: removed unused functions
Dmitry Kasatkin [Thu, 26 Jan 2012 17:13:23 +0000]
lib/mpi: removed unused functions

do_encode_md() and mpi_get_keyid() are not parts of mpi library.
They were used early versions of gnupg and in digsig project,
but they are not used neither here nor there anymore.

Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Reviewed-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: James Morris <jmorris@namei.org>

7 years agolib/mpi: checks for zero divisor length
Dmitry Kasatkin [Thu, 26 Jan 2012 17:13:22 +0000]
lib/mpi: checks for zero divisor length

Divisor length should not be 0.

Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Reviewed-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: James Morris <jmorris@namei.org>

7 years agolib/mpi: return error code on dividing by zero
Dmitry Kasatkin [Thu, 26 Jan 2012 17:13:21 +0000]
lib/mpi: return error code on dividing by zero

Definitely better to return error code than to divide by zero.

Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Reviewed-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: James Morris <jmorris@namei.org>

7 years agolib/mpi: replaced MPI_NULL with normal NULL
Dmitry Kasatkin [Thu, 26 Jan 2012 17:13:16 +0000]
lib/mpi: replaced MPI_NULL with normal NULL

MPI_NULL is replaced with normal NULL.

Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Reviewed-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: James Morris <jmorris@namei.org>

7 years agolib/mpi: added missing NULL check
Dmitry Kasatkin [Thu, 26 Jan 2012 17:13:17 +0000]
lib/mpi: added missing NULL check

Added missing NULL check after mpi_alloc().

Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Reviewed-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: James Morris <jmorris@namei.org>

7 years agoALSA: HDA: Fix duplicated output to more than one codec
David Henningsson [Wed, 1 Feb 2012 11:05:41 +0000]
ALSA: HDA: Fix duplicated output to more than one codec

This typo caused the wrong codec's nid to be checked for wcaps type.
As a result, sometimes speakers would duplicate the output sent to
HDMI output.

Cc: stable@kernel.org
BugLink: https://bugs.launchpad.net/bugs/924320
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

7 years agoASoC: cs42l73: Fix Output [X|A|V]SP_SCLK Sourcing Mode setting for master mode
Axel Lin [Tue, 31 Jan 2012 01:49:04 +0000]
ASoC: cs42l73: Fix Output [X|A|V]SP_SCLK Sourcing Mode setting for master mode

For master mode, set Output [X|A|V]SP_SCLK Sourcing Mode to MCLK Mode.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Brian Austin <brian.austin@cirrus.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

7 years agoASoC: wm8962: Fix word length configuration
Susan Gao [Mon, 30 Jan 2012 21:57:04 +0000]
ASoC: wm8962: Fix word length configuration

Signed-off-by: Susan Gao <sgao@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@vger.kernel.org

7 years agoKVM: do not #GP on perf MSR writes when vPMU is disabled
Gleb Natapov [Sun, 15 Jan 2012 12:17:22 +0000]
KVM: do not #GP on perf MSR writes when vPMU is disabled

Return to behaviour perf MSR had before introducing vPMU in case vPMU
is disabled. Some guests access those registers unconditionally and do
not expect it to fail.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

7 years agoKVM: x86: fix missing checks in syscall emulation
Stephan Bärwolf [Thu, 12 Jan 2012 15:43:04 +0000]
KVM: x86: fix missing checks in syscall emulation

On hosts without this patch, 32bit guests will crash (and 64bit guests
may behave in a wrong way) for example by simply executing following

    [bits 32]
    global _start
    SECTION .text
    _start: syscall

(I tested it with winxp and linux - both always crashed)

    Disassembly of section .text:

    00000000 <_start>:
       0:   0f 05                   syscall

The reason seems a missing "invalid opcode"-trap (int6) for the
syscall opcode "0f05", which is not available on Intel CPUs
within non-longmodes, as also on some AMD CPUs within legacy-mode.
(depending on CPU vendor, MSR_EFER and cpuid)

Because previous mentioned OSs may not engage corresponding
syscall target-registers (STAR, LSTAR, CSTAR), they remain
NULL and (non trapping) syscalls are leading to multiple
faults and finally crashs.

Depending on the architecture (AMD or Intel) pretended by
guests, various checks according to vendor's documentation
are implemented to overcome the current issue and behave
like the CPUs physical counterparts.

[mtosatti: cleanup/beautify code]

Signed-off-by: Stephan Baerwolf <stephan.baerwolf@tu-ilmenau.de>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

7 years agoKVM: x86: extend "struct x86_emulate_ops" with "get_cpuid"
Stephan Bärwolf [Thu, 12 Jan 2012 15:43:03 +0000]
KVM: x86: extend "struct x86_emulate_ops" with "get_cpuid"

In order to be able to proceed checks on CPU-specific properties
within the emulator, function "get_cpuid" is introduced.
With "get_cpuid" it is possible to virtually call the guests
"cpuid"-opcode without changing the VM's context.

[mtosatti: cleanup/beautify code]

Signed-off-by: Stephan Baerwolf <stephan.baerwolf@tu-ilmenau.de>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

7 years agoKVM: Fix __set_bit() race in mark_page_dirty() during dirty logging
Takuya Yoshikawa [Wed, 4 Jan 2012 06:06:43 +0000]
KVM: Fix __set_bit() race in mark_page_dirty() during dirty logging

It is possible that the __set_bit() in mark_page_dirty() is called
simultaneously on the same region of memory, which may result in only
one bit being set, because some callers do not take mmu_lock before

This problem is hard to produce because when we reach mark_page_dirty()
beginning from, e.g., tdp_page_fault(), mmu_lock is being held during
__direct_map():  making kvm-unit-tests' dirty log api test write to two
pages concurrently was not useful for this reason.

So we have confirmed that there can actually be race condition by
checking if some callers really reach there without holding mmu_lock
using spin_is_locked():  probably they were from kvm_write_guest_page().

To fix this race, this patch changes the bit operation to the atomic
version:  note that nr_dirty_pages also suffers from the race but we do
not need exactly correct numbers for now.

Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

7 years agoMerge branch 'drm-nouveau-fixes' of git://anongit.freedesktop.org/git/nouveau/linux...
Dave Airlie [Wed, 1 Feb 2012 09:36:24 +0000]
Merge branch 'drm-nouveau-fixes' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes

* 'drm-nouveau-fixes' of git://anongit.freedesktop.org/git/nouveau/linux-2.6:
  drm/nv50/pm: signedness bug in nv50_pm_clocks_pre()
  drm/nouveau/gem: fix fence_sync race / oops
  drm/nouveau: fix typo on mxmdcb option
  drm/nouveau/mxm: pretend to succeed, even if we can't shadow the MXM-SIS
  drm/nouveau/disp: check that panel power gpio is enabled at init time

7 years agoALSA: hda - Fix calling cs_automic twice for Cirrus codecs.
Dylan Reid [Tue, 31 Jan 2012 21:04:41 +0000]
ALSA: hda - Fix calling cs_automic twice for Cirrus codecs.

If cs_automic is called twice (like it is during init) while the mic
is present, it will over-write the last_input with the new one,
causing it to switch back to the automic input when the mic is
unplugged. This leaves the driver in a state (cur_input, last_input,
and automix_idx the same) where the internal mic can not be selected
until it is rebooted without the mic attached.

Check that the mic hasn't already been switched to before setting

Signed-off-by: Dylan Reid <dgreid@chromium.org>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

7 years agodrm/nv50/pm: signedness bug in nv50_pm_clocks_pre()
Dan Carpenter [Wed, 4 Jan 2012 07:20:47 +0000]
drm/nv50/pm: signedness bug in nv50_pm_clocks_pre()

calc_mclk() returns zero on success and negative on failure but clk is
a u32.

v2: Martin Peres:
- clk should be an int, not a u32

Signed-off-by: Martin Peres <martin.peres@labri.fr>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

7 years agodrm/nouveau/gem: fix fence_sync race / oops
Ben Skeggs [Tue, 10 Jan 2012 00:18:28 +0000]
drm/nouveau/gem: fix fence_sync race / oops

Due to a race it was possible for a fence to be destroyed while another
thread was trying to synchronise with it.  If this happened in the fallback
non-semaphore path, it lead to the following oops due to fence->channel
being NULL.

BUG: unable to handle kernel NULL pointer dereference at   (null)
IP: [<fa9632ce>] nouveau_fence_update+0xe/0xe0 [nouveau]
*pde = a649c067
Modules linked in: fuse nouveau(O) ttm(O) drm_kms_helper(O) drm(O) mxm_wmi video wmi netconsole configfs lockd bnep bluetooth rfkill ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ip6table_filter ip6_tables snd_hda_codec_realtek snd_hda_intel snd_hda_cobinfmt_misc uinput ata_generic pata_acpi pata_aet2c_algo_bit i2c_core [last unloaded: wmi]

Pid: 2255, comm: gnome-shell Tainted: G           O 3.2.0-0.rc5.git0.1.fc17.i686 #1 System manufacturer System Product Name/M2A-VM
EIP: 0060:[<fa9632ce>] EFLAGS: 00010296 CPU: 1
EIP is at nouveau_fence_update+0xe/0xe0 [nouveau]
EAX: 00000000 EBX: ddfc6dd0 ECX: dd111580 EDX: 00000000
ESI: 00003e80 EDI: dd111580 EBP: dd121d00 ESP: dd121ce8
 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
Process gnome-shell (pid: 2255, ti=dd120000 task=dd111580 task.ti=dd120000)
 7dc86c76 00000000 00003e80 ddfc6dd0 00003e80 dd111580 dd121d0c fa96371f
 00000000 dd121d3c fa963773 dd111580 01000246 000ec53d 00000000 ddfc6dd0
 00001f40 00000000 ddfc6dd0 00000010 dc7df840 dd121d6c fa9639a0 00000000
Call Trace:
 [<fa96371f>] __nouveau_fence_signalled+0x1f/0x30 [nouveau]
 [<fa963773>] __nouveau_fence_wait+0x43/0xd0 [nouveau]
 [<fa9639a0>] nouveau_fence_sync+0x1a0/0x1c0 [nouveau]
 [<fa964046>] validate_list+0x176/0x300 [nouveau]
 [<f7d9c9c0>] ? ttm_bo_mem_put+0x30/0x30 [ttm]
 [<fa964b8a>] nouveau_gem_ioctl_pushbuf+0x48a/0xfd0 [nouveau]
 [<c0406481>] ? die+0x31/0x80
 [<f7c93d98>] drm_ioctl+0x388/0x490 [drm]
 [<c0406481>] ? die+0x31/0x80
 [<fa964700>] ? nouveau_gem_ioctl_new+0x150/0x150 [nouveau]
 [<c0635c7b>] ? file_has_perm+0xcb/0xe0
 [<f7c93a10>] ? drm_copy_field+0x80/0x80 [drm]
 [<c0564f56>] do_vfs_ioctl+0x86/0x5b0
 [<c0406481>] ? die+0x31/0x80
 [<c0635f22>] ? selinux_file_ioctl+0x62/0x130
 [<c0554f30>] ? fget_light+0x30/0x340
 [<c05654ef>] sys_ioctl+0x6f/0x80
 [<c099e3a4>] syscall_call+0x7/0xb
 [<c0406481>] ? die+0x31/0x80
 [<c0406481>] ? die+0x31/0x80

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org

7 years agodrm/nouveau: fix typo on mxmdcb option
Ben Skeggs [Sat, 7 Jan 2012 06:48:52 +0000]
drm/nouveau: fix typo on mxmdcb option

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

7 years agodrm/nouveau/mxm: pretend to succeed, even if we can't shadow the MXM-SIS
Ben Skeggs [Wed, 1 Feb 2012 05:08:59 +0000]
drm/nouveau/mxm: pretend to succeed, even if we can't shadow the MXM-SIS

There's at least one known case where our shadowing code is buggy, and we
fail init.  Until we can be confident we're doing all this correctly, lets
succeed and risk crazy bios tables rather than failing for perfectly valid
configs too.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

7 years agodrm/nouveau/disp: check that panel power gpio is enabled at init time
Ben Skeggs [Mon, 30 Jan 2012 23:16:59 +0000]
drm/nouveau/disp: check that panel power gpio is enabled at init time

Reported-by: Yuriy Khomchik <homyur@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

7 years agoLinux 3.3-rc2
Linus Torvalds [Tue, 31 Jan 2012 21:31:54 +0000]
Linux 3.3-rc2

7 years agosh: use the the PCI channels's io_map_base
Michael S. Tsirkin [Sun, 29 Jan 2012 22:29:10 +0000]
sh: use the the PCI channels's io_map_base

commit 43db595e8b5d78ce5ad2feab719814a76e3ad2e5
(sh: switch to GENERIC_PCI_IOMAP)
failed to take into account the PCI channels's
io_map_base for mapping IO BARs.
This also caused a new warning on sh.

Fix this, without re-introducing code duplication,
and supplying a sh-specific __pci_ioport_map.

Reported-by: Kevin Cernekee <cernekee@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

7 years agomips: use the the PCI controller's io_map_base
Michael S. Tsirkin [Sun, 29 Jan 2012 22:23:38 +0000]
mips: use the the PCI controller's io_map_base

commit eab90291d35438bcebf7c3dc85be66d0f24e3002
(mips: switch to GENERIC_PCI_IOMAP)
failed to take into account the PCI controller's
io_map_base for mapping IO BARs.
This also caused a new warning on mips.

Fix this, without re-introducing code duplication,
and supplying a mips-specific __pci_ioport_map.

Reported-by: Kevin Cernekee <cernekee@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

7 years agolib: add NO_GENERIC_PCI_IOPORT_MAP
Michael S. Tsirkin [Sun, 29 Jan 2012 22:20:48 +0000]

Some architectures need to override the way
IO port mapping is done on PCI devices.
Supply a generic macro that calls
ioport_map, and make it possible for architectures
to override.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>

7 years agoASoC: core: Better support for idle_bias_off suspend ignores
Mark Brown [Tue, 31 Jan 2012 15:49:10 +0000]
ASoC: core: Better support for idle_bias_off suspend ignores

If an idle_bias_off device is in any state other than off then it is still
active for some reason (typically a low power function such as accessory
detection). This wasn't an issue when the feature was implemented as we
always went to _ON for any active function, subsequent power improvements
have changed things.

With the modern way of doing things we should overhaul the infrastructure
to allow devices to explicitly take references for these functions but
that's a much more invasive change and will require driver updates to
deploy, this will bring the framework into line with the existing driver
set before we do that work.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>

7 years ago[CIFS] Update cifs Kconfig title to match removal of experimental dependency
Steve French [Tue, 31 Jan 2012 18:51:24 +0000]
[CIFS] Update cifs Kconfig title to match removal of experimental dependency

Removed the dependency on CONFIG_EXPERIMENTAL but forgot to update
the text description to be consistent.

Signed-off-by: Steve French <smfrench@gmail.com>

7 years agoMerge tag 'for-linus' of git://github.com/prasad-joshi/logfs_upstream
Linus Torvalds [Tue, 31 Jan 2012 17:23:59 +0000]
Merge tag 'for-linus' of git://github.com/prasad-joshi/logfs_upstream

There are few important bug fixes for LogFS

* tag 'for-linus' of git://github.com/prasad-joshi/logfs_upstream:
  Logfs: Allow NULL block_isbad() methods
  logfs: Grow inode in delete path
  logfs: Free areas before calling generic_shutdown_super()
  logfs: remove useless BUG_ON
  MAINTAINERS: Add Prasad Joshi in LogFS maintiners
  logfs: Propagate page parameter to __logfs_write_inode
  logfs: set superblock shutdown flag after generic sb shutdown
  logfs: take write mutex lock during fsync and sync
  logfs: Prevent memory corruption
  logfs: update page reference count for pined pages

Fix up conflict in fs/logfs/dev_mtd.c due to semantic change in what
"mtd->block_isbad" means in commit f2933e86ad93: "Logfs: Allow NULL
block_isbad() methods" clashing with the abstraction changes in the
commits 7086c19d0742: "mtd: introduce mtd_block_isbad interface" and
d58b27ed58a3: "logfs: do not use 'mtd->block_isbad' directly".

This resolution takes the semantics from commit f2933e86ad93, and just
makes mtd_block_isbad() return zero (false) if the 'block_isbad'
function is NULL.  But that also means that now "mtd_can_have_bb()"
always returns 0.

Now, "mtd_block_markbad()" will obviously return an error if the
low-level driver doesn't support bad blocks, so this is somewhat
non-symmetric, but it actually makes sense if a NULL "block_isbad"
function is considered to mean "I assume that all my blocks are always

7 years agoASoC: wm8994: Remove ASoC level register cache sync
Mark Brown [Tue, 31 Jan 2012 14:51:29 +0000]
ASoC: wm8994: Remove ASoC level register cache sync

Now we've switched over to regmap the ASoC level cache sync will be
ineffectual and potentially harmful as there is no longer an ASoC level

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

7 years agoMerge branch 'fix/asoc' into for-linus
Takashi Iwai [Tue, 31 Jan 2012 14:13:14 +0000]
Merge branch 'fix/asoc' into for-linus

7 years agoALSA: HDA: Remove quirk for Toshiba Qosmio G50
David Henningsson [Tue, 31 Jan 2012 09:31:49 +0000]
ALSA: HDA: Remove quirk for Toshiba Qosmio G50

The user reports that model=auto works better than current handling
on a 3.2 based kernel (with jack detection patches backported).
Since model=auto is what we prefer these days anyway, the quirk
should be removed.

Alsa-info for the relevant machine:

BugLink: https://bugs.launchpad.net/bugs/923316
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

7 years agoALSA: HDA: Fix jack creation for codecs with front and rear Line In
David Henningsson [Tue, 31 Jan 2012 08:04:15 +0000]
ALSA: HDA: Fix jack creation for codecs with front and rear Line In

If a codec has both a front and a rear Line In, two controls both
named "Line Jack" will be created, which causes parsing to fail.
While a long term solution might be to name the jacks differently,
this extra check is consistent with what is already being done in many
auto-parsers, and will also protect against other cases when two
inputs have the same label.

BugLink: https://bugs.launchpad.net/bugs/923409
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

7 years agocifs: fix printk format warnings
Randy Dunlap [Tue, 31 Jan 2012 03:50:01 +0000]
cifs: fix printk format warnings

Fix printk format warnings for ssize_t variables:

fs/cifs/connect.c:2145:3: warning: format '%ld' expects type 'long int', but argument 3 has type 'ssize_t'
fs/cifs/connect.c:2152:3: warning: format '%ld' expects type 'long int', but argument 3 has type 'ssize_t'
fs/cifs/connect.c:2160:3: warning: format '%ld' expects type 'long int', but argument 3 has type 'ssize_t'
fs/cifs/connect.c:2170:3: warning: format '%ld' expects type 'long int', but argument 3 has type 'ssize_t'

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: Jeff Layton <jlayton@redhat.com>
Cc: linux-cifs@vger.kernel.org

7 years agocifs: check offset in decode_ntlmssp_challenge()
Dan Carpenter [Tue, 31 Jan 2012 08:52:01 +0000]
cifs: check offset in decode_ntlmssp_challenge()

We should check that we're not copying memory from beyond the end of the

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>

7 years agoMerge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git...
Ingo Molnar [Tue, 31 Jan 2012 12:01:58 +0000]
Merge tag 'perf-urgent-for-mingo' of git://git./linux/kernel/git/acme/linux into perf/urgent

Fixes cherry picked from perf/core.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

7 years agoASoC: wm_hubs: Fix routing of input PGAs to line output mixer
Mark Brown [Tue, 31 Jan 2012 11:55:32 +0000]
ASoC: wm_hubs: Fix routing of input PGAs to line output mixer

IN1L/R is routed to both line output mixers, we don't route IN1 to LINEOUT1
and IN2 to LINEOUT2.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@vger.kernel.org

7 years agoRevert "microblaze: Add topology init"
Michal Simek [Mon, 30 Jan 2012 09:53:08 +0000]
Revert "microblaze: Add topology init"

This reverts commit d761f0c521868e59cd0bc59159cbdb4686fe210d.

Patch: "cpu: Register a generic CPU device on architectures that currently do not"
(sha1: 9f13a1fd452f11c18004ba2422a6384b424ec8a9)

selects GENERIC_CPU_DEVICES for Microblaze which register cpu.
My patch was done in the same time that's why cpu was registered twice which
caused this warning log:

------------[ cut here ]------------
WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xb0/0xdc()
sysfs: cannot create duplicate filename '/devices/system/cpu/cpu0'
Modules linked in:

Signed-off-by: Michal Simek <monstr@monstr.eu>

7 years agoMerge branch fixes of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/dmaengine.git
Vinod Koul [Tue, 31 Jan 2012 08:04:15 +0000]
Merge branch fixes of git://git./linux/kernel/git/djbw/dmaengine.git

7 years agoat_hdmac: bugfix for enabling channel irq
Nikolaus Voss [Tue, 17 Jan 2012 09:28:33 +0000]
at_hdmac: bugfix for enabling channel irq

commit 463894705e4089d0ff69e7d877312d496ac70e5b deleted redundant
chan_id and chancnt initialization in dma drivers as this is done
in dma_async_device_register().

However, atc_enable_irq() relied on chan_id set before registering
the device, what left only channel 0 functional for this driver.

This patch introduces atc_enable/disable_chan_irq() as a variant
of atc_enable/disable_irq() with the channel as explicit argument.

Signed-off-by: Nikolaus Voss <n.voss@weinmann.de>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>

7 years agoMerge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groec...
Linus Torvalds [Tue, 31 Jan 2012 01:08:40 +0000]
Merge branch 'hwmon-for-linus' of git://git./linux/kernel/git/groeck/linux-staging

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (w83627ehf) Disable setting DC mode for pwm2, pwm3 on NCT6776F
  hwmon: (sht15) fix bad error code
  MAINTAINERS: Drop maintainer for MAX1668 hwmon driver
  MAINTAINERS: Add hwmon entries for Wolfson
  hwmon: (f71805f) Fix clamping of temperature limits

7 years agoMerge branch 'for-torvalds' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw...
Linus Torvalds [Tue, 31 Jan 2012 01:06:26 +0000]
Merge branch 'for-torvalds' of git://git./linux/kernel/git/linusw/linux-pinctrl

Here are some fixes to the pin control system that has accumulated since
-rc1.  Mainly Tony Lindgren fixed the module load/unload logic and the
rest are minor fixes and documentation.

* 'for-torvalds' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: add checks for empty function names
  pinctrl: fix pinmux_hog_maps when ctrl_dev_name is not set
  pinctrl: fix some pinmux typos
  pinctrl: free debugfs entries when unloading a pinmux driver
  pinctrl: unbreak error messages
  Documentation/pinctrl: fix a few syntax errors in code examples
  pinctrl: fix pinconf_pins_show iteration

7 years agoperf top: Fix number of samples displayed
Stephane Eranian [Mon, 30 Jan 2012 10:50:37 +0000]
perf top: Fix number of samples displayed

In recent versions of perf top, pressing the 'e' key to change the
number of displayed samples had no effect.

The number of samples was still dictated by the size of the terminal
(stdio mode). That was quite annoying because typically only the first
dozen samples really matter.

This patch fixes this.

Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120130105037.GA5160@quad
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

7 years agoperf tools: Fix strlen() bug in perf_event__synthesize_event_type()
Stephane Eranian [Fri, 20 Jan 2012 09:49:12 +0000]
perf tools: Fix strlen() bug in perf_event__synthesize_event_type()

The event_type record has a max length for the event name.

It's called MAX_EVENT_NAME.

The name may be truncated to fit the max length. But the header.size still
reflects the original name length. If that length is > MAX_EVENT_NAME, then the
header.size field is bogus. Fix this by using the length of the name after the
potential truncation.

Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120120094912.GA4882@quad
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

7 years agoperf tools: Fix broken build by defining _GNU_SOURCE in Makefile
David Daney [Tue, 17 Jan 2012 21:41:01 +0000]
perf tools: Fix broken build by defining _GNU_SOURCE in Makefile

When building on my Debian/mips system, util/util.c fails to build
because commit 1aed2671738785e8f5aea663a6fda91aa7ef59b5 (perf kvm: Do
guest-only counting by default) indirectly includes stdio.h before the
feature selection in util.h is done.  This prevents _GNU_SOURCE in
util.h from enabling the declaration of getline(), from now second
inclusion of stdio.h, and the build is broken.

There is another breakage in util/evsel.c caused by include ordering,
but I didn't fully track down the commit that caused it.

The root cause of all this is an inconsistent definition of _GNU_SOURCE,
so I move the definition into the Makefile so that it is passed to all
invocations of the compiler and used uniformly for all system header
files.  All other #define and #undef of _GNU_SOURCE are removed as they
cause conflicts with the definition passed to the compiler.

All the features.h definitions (_LARGEFILE64_SOURCE _FILE_OFFSET_BITS=64
and _GNU_SOURCE) are needed by the python glue code too, so they are
moved to BASIC_CFLAGS, and the misleading comments about BASIC_CFLAGS
are removed.

This gives me a clean build on x86_64 (fc12) and mips (Debian).

Cc: David Daney <david.daney@cavium.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Joerg Roedel <joerg.roedel@amd.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1326836461-11952-1-git-send-email-ddaney.cavm@gmail.com
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

7 years agoMerge branches 'cma', 'ipath', 'misc', 'mlx4', 'nes' and 'qib' into for-next
Roland Dreier [Tue, 31 Jan 2012 00:18:21 +0000]
Merge branches 'cma', 'ipath', 'misc', 'mlx4', 'nes' and 'qib' into for-next

7 years agoRDMA/nes: Copyright update
Tatyana Nikolova [Mon, 28 Nov 2011 20:22:29 +0000]
RDMA/nes: Copyright update

Update copyright information in the source files.

Signed-off-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com>
Signed-off-by: Faisal Latif <Faisal.Latif@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>

7 years agoIB/mlx4: pass SMP vendor-specific attribute MADs to firmware
Jack Morgenstein [Thu, 26 Jan 2012 14:41:33 +0000]
IB/mlx4: pass SMP vendor-specific attribute MADs to firmware

In the current code, vendor-specific MADs (e.g with the FDR-10
attribute) are silently dropped by the driver, resulting in timeouts
at the sending side and inability to query/configure the relevant
feature.  However, the ConnectX firmware is able to handle such MADs.
For unsupported attributes, the firmware returns a GET_RESPONSE MAD
containing an error status.

For example, for a FDR-10 node with LID 11:

    # ibstat mlx4_0 1

    CA: 'mlx4_0'
    Port 1:
    State: Active
    Physical state: LinkUp
    Rate: 40 (FDR10)
    Base lid: 11
    LMC: 0
    SM lid: 24
    Capability mask: 0x02514868
    Port GUID: 0x0002c903002e65d1
    Link layer: InfiniBand

Extended Port Query (EPI) vendor mad timeouts before the patch:

    # smpquery MEPI 11 -d

    ibwarn: [4196] smp_query_via: attr 0xff90 mod 0x0 route Lid 11
    ibwarn: [4196] _do_madrpc: retry 1 (timeout 1000 ms)
    ibwarn: [4196] _do_madrpc: retry 2 (timeout 1000 ms)
    ibwarn: [4196] _do_madrpc: timeout after 3 retries, 3000 ms
    ibwarn: [4196] mad_rpc: _do_madrpc failed; dport (Lid 11)
    smpquery: iberror: [pid 4196] main: failed: operation EPI: ext port info query failed

EPI query works OK with the patch:

    # smpquery MEPI 11 -d

    ibwarn: [6548] smp_query_via: attr 0xff90 mod 0x0 route Lid 11
    ibwarn: [6548] mad_rpc: data offs 64 sz 64
    mad data
    0000 0000 0000 0001 0000 0001 0000 0001
    0000 0000 0000 0000 0000 0000 0000 0000
    0000 0000 0000 0000 0000 0000 0000 0000
    0000 0000 0000 0000 0000 0000 0000 0000
    # Ext Port info: Lid 11 port 0

Signed-off-by: Jack Morgenstein <jackm@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Acked-by: Ira Weiny <weiny2@llnl.gov>
Cc: <stable@vger.kernel.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>