10 years agonfs41: add support for callback with RPC version number 4
Alexandros Batsakis [Sat, 5 Dec 2009 18:19:01 +0000]
nfs41: add support for callback with RPC version number 4

The NFSv4.1 spec-29 (18.36.3) says that the server MUST use an ONC RPC
(program) version number equal to 4 in callbacks sent to the client.
For now we allow both versions 1 and 4.

Signed-off-by: Alexandros Batsakis <batsakis@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

10 years agonfs41: only state manager sets NFS4CLNT_SESSION_SETUP
Andy Adamson [Fri, 4 Dec 2009 21:02:14 +0000]
nfs41: only state manager sets NFS4CLNT_SESSION_SETUP

Replace sync and async handlers setting of the NFS4CLNT_SESSION_SETUP bit with
setting NFS4CLNT_CHECK_LEASE, and let the state manager decide to reset the session.

Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

10 years agonfs41: drain session cleanup
Andy Adamson [Fri, 4 Dec 2009 20:55:39 +0000]
nfs41: drain session cleanup

Do not wake up the next slot_tbl_waitq task in nfs4_free_slot because we
may be draining the slot. Either signal the state manager that the session
is drained (the state manager wakes up tasks) OR wake up the next task.

In nfs41_sequence_done, the slot dereference is only needed in the sequence
operation success case.

Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

10 years agonfs41: nfs41: fix state manager deadlock in session reset
Andy Adamson [Fri, 4 Dec 2009 20:55:38 +0000]
nfs41: nfs41: fix state manager deadlock in session reset

If the session is reset during state recovery, the state manager thread can
sleep on the slot_tbl_waitq causing a deadlock.

Add a completion framework to the session.  Have the state manager thread set
a new session state (NFS4CLNT_SESSION_DRAINING) and wait for the session slot
table to drain.

Signal the state manager thread in nfs41_sequence_free_slot when the
NFS4CLNT_SESSION_DRAINING bit is set and the session is drained.

Reported-by: Trond Myklebust <trond@netapp.com>
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

10 years agonfs41: remove nfs4_recover_session
Andy Adamson [Fri, 4 Dec 2009 20:55:37 +0000]
nfs41: remove nfs4_recover_session

nfs4_recover_session can put rpciod to sleep. Just use nfs4_schedule_recovery.

Reported-by: Trond Myklebust <trond.myklebust@netapp.com>
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

10 years agonfs41: don't clear tk_action on success
Andy Adamson [Fri, 4 Dec 2009 20:55:35 +0000]
nfs41: don't clear tk_action on success

Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

10 years agonfs41: fix switch in nfs4_recovery_handle_error
Andy Adamson [Fri, 4 Dec 2009 20:55:34 +0000]
nfs41: fix switch in nfs4_recovery_handle_error

Do not fall through and set NFS4CLNT_SESSION_RESET bit on NFS4ERR_EXPIRED

Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

10 years agonfs41: fix switch in nfs4_handle_exception
Andy Adamson [Fri, 4 Dec 2009 20:55:32 +0000]
nfs41: fix switch in nfs4_handle_exception

Do not fall through and call nfs4_delay on session error handling.

Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

10 years agonfs41: free the slot on unhandled read errors
Andy Adamson [Fri, 4 Dec 2009 20:55:30 +0000]
nfs41: free the slot on unhandled read errors

nfs4_read_done returns zero on unhandled errors. nfs_readpage_result will
return on a negative tk_status without freeing the slot.
Call nfs4_sequence_free_slot on unhandled errors in nfs4_read_done.

Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

10 years agonfs41: call free slot from nfs4_restart_rpc
Andy Adamson [Fri, 4 Dec 2009 20:55:29 +0000]
nfs41: call free slot from nfs4_restart_rpc

nfs41_sequence_free_slot can be called multiple times on SEQUENCE operation
errors.
No reason to inline nfs4_restart_rpc

Reported-by: Trond Myklebust <trond.myklebust@netapp.com>

nfs_writeback_done and nfs_readpage_retry call nfs4_restart_rpc outside the
error handler, and the slot is not freed prior to restarting in the rpc_prepare
state during session reset.

Fix this by moving the call to nfs41_sequence_free_slot from the error
path of nfs41_sequence_done into nfs4_restart_rpc, and by removing the test
for NFS4CLNT_SESSION_SETUP.
Always free slot and goto the rpc prepare state on async errors.

Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

10 years agonfs41: nfs4_get_lease_time will never session reset
Andy Adamson [Fri, 4 Dec 2009 20:55:27 +0000]
nfs41: nfs4_get_lease_time will never session reset

Make this clear by calling rpc_restart-call.
Prepare for nfs4_restart_rpc() to free slots.

Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

10 years agonfs41: rename cl_state session SETUP bit to RESET
Andy Adamson [Fri, 4 Dec 2009 20:55:05 +0000]
nfs41: rename cl_state session SETUP bit to RESET

The bit is no longer used for session setup, only for session reset.

Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

10 years agonfs41: add create session into establish_clid
Andy Adamson [Fri, 4 Dec 2009 20:52:24 +0000]
nfs41: add create session into establish_clid

Reported-by: Trond Myklebust <trond.myklebust@netapp.com>

Resetting the clientid from the state manager could result in not confirming
the clientid due to create session not being called.

Move the create session call from the NFS4CLNT_SESSION_SETUP state manager
initialize session case into the NFS4CLNT_LEASE_EXPIRED case establish_clid
call.

Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

10 years agoMerge branch 'devel' into linux-next
Trond Myklebust [Fri, 4 Dec 2009 02:27:36 +0000]
Merge branch 'devel' into linux-next

10 years agoNFS4ERR_FILE_OPEN handling in Linux/NFS
NeilBrown [Thu, 3 Dec 2009 20:58:56 +0000]
NFS4ERR_FILE_OPEN handling in Linux/NFS

NFS4ERR_FILE_OPEN is return by the server when an operation cannot be
performed because the file is currently open and local (to the server)
semantics prohibit the operation while the file is open.
A typical case is a RENAME operation on an MS-Windows platform, which
prevents rename while the file is open.

While it is possible that such a condition is transitory, it is also
very possible that the file will be held open for an extended period
of time thus preventing the operation.

The current behaviour of Linux/NFS is to retry the operation
indefinitely.  This is not appropriate - we do not expect a rename to
take an arbitrary amount of time to complete.

Rather, and error should be returned.  The most obvious error code
would be EBUSY, which is a legal at least for 'rename' and 'unlink',
and accurately captures the reason for the error.

This patch allows a few retries until about 2 seconds have elapsed,
then returns EBUSY.

Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

10 years agoMerge branch 'bugfixes' into nfs-for-next
Trond Myklebust [Thu, 3 Dec 2009 21:01:51 +0000]
Merge branch 'bugfixes' into nfs-for-next

10 years agonfs: clean up sillyrenaming in nfs_rename()
Miklos Szeredi [Thu, 3 Dec 2009 20:58:56 +0000]
nfs: clean up sillyrenaming in nfs_rename()

The d_instantiate(new_dentry, NULL) is superfluous, the dentry is
already negative.  Rehashing this dummy dentry isn't needed either,
d_move() works fine on an unhashed target.

The re-checking for busy after a failed nfs_sillyrename() is bogus
too: new_dentry->d_count < 2 would be a bug here.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

10 years agonfs: dont unhash target if renaming a directory
Miklos Szeredi [Thu, 3 Dec 2009 20:58:56 +0000]
nfs: dont unhash target if renaming a directory

Move unhashing the target to after the check for existence and being a
non-directory.

If renaming a directory then the VFS already unhashes the target if it
is not busy.  If it's busy then acquiring more references during the
rename makes no difference.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

10 years agonfs: fix comments in nfs_rename()
Miklos Szeredi [Thu, 3 Dec 2009 20:58:56 +0000]
nfs: fix comments in nfs_rename()

Comments are wrong or out of date.  In particular d_drop() doesn't
free the inode it just unhashes the dentry.  And if target is a
directory then it is not checked for being busy.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

10 years agonfs: remove unnecessary check from nfs_rename()
Miklos Szeredi [Thu, 3 Dec 2009 20:58:56 +0000]
nfs: remove unnecessary check from nfs_rename()

VFS already checks if both source and target are directories.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

10 years agoNFSv4.1: Handle NFSv4.1 session errors in the lock recovery code
Trond Myklebust [Thu, 3 Dec 2009 20:58:56 +0000]
NFSv4.1: Handle NFSv4.1 session errors in the lock recovery code

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

10 years agoSUNRPC: soft connect semantics for UDP
Chuck Lever [Thu, 3 Dec 2009 20:58:56 +0000]
SUNRPC: soft connect semantics for UDP

Introduce soft connect behavior for UDP transports.  In this case, a
major timeout returns ETIMEDOUT instead of EIO.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

10 years agoSUNRPC: Use soft connect semantics when performing RPC ping
Chuck Lever [Thu, 3 Dec 2009 20:58:56 +0000]
SUNRPC: Use soft connect semantics when performing RPC ping

Currently, if a remote RPC service is unreachable, an RPC ping will
hang until the underlying transport connect attempt times out.  A more
desirable behavior might be to have the ping fail immediately so upper
layers can recover appropriately.

In the case of an NFS mount, for instance, this would mean the
mount(2) system call could fail immediately if the server isn't
listening, rather than hanging uninterruptibly for more than 3
minutes.

Change rpc_ping() so that it fails immediately for connection-oriented
transports.  rpc_create() will then fail immediately for such
transports if an RPC ping was requested.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

10 years agoSUNRPC: Use soft connects for autobinding over TCP
Chuck Lever [Thu, 3 Dec 2009 20:58:56 +0000]
SUNRPC: Use soft connects for autobinding over TCP

Autobinding is handled by the rpciod process, not in user processes
that are generating regular RPC requests.  Thus autobinding is usually
not affected by signals targetting user processes, such as KILL or
timer expiration events.

In addition, an RPC request generated by a user process that has
RPC_TASK_SOFTCONN set and needs to perform an autobind will hang if
the remote rpcbind service is not available.

For rpcbind queries on connection-oriented transports, let's use the
new soft connect semantic to return control to the user's process
quickly, if the kernel's rpcbind client can't connect to the remote
rpcbind service.

Logic is introduced in call_bind_status() to handle connection errors
that occurred during an asynchronous rpcbind query.  The logic
abandons the rpcbind query if the RPC request has SOFTCONN set, and
retries after a few seconds in the normal case.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

10 years agoSUNRPC: Use TCP for local rpcbind upcalls
Chuck Lever [Thu, 3 Dec 2009 20:58:56 +0000]
SUNRPC: Use TCP for local rpcbind upcalls

Use TCP with the soft connect semantic for local rpcbind upcalls so
the kernel can detect immediately if the local rpcbind daemon is not
running.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

10 years agoSUNRPC: Use a cached RPC client and transport for rpcbind upcalls
Chuck Lever [Thu, 3 Dec 2009 20:58:56 +0000]
SUNRPC: Use a cached RPC client and transport for rpcbind upcalls

The kernel's rpcbind client creates and deletes an rpc_clnt and its
underlying transport socket for every upcall to the local rpcbind
daemon.

When starting a typical NFS server on IPv4 and IPv6, the NFS service
itself does three upcalls (one per version) times two upcalls (one
per transport) times two upcalls (one per address family), making 12,
plus another one for the initial call to unregister previous NFS
services.  Starting the NLM service adds an additional 13 upcalls,
for similar reasons.

(Currently the NFS service doesn't start IPv6 listeners, but it will
soon enough).

Instead, let's create an rpc_clnt for rpcbind upcalls during the
first local rpcbind query, and cache it.  This saves the overhead of
creating and destroying an rpc_clnt and a socket for every upcall.

The new logic also prevents the kernel from attempting an RPCB_SET or
RPCB_UNSET if it knows from the start that the local portmapper does
not support rpcbind protocol version 4.  This will cut down on the
number of rpcbind upcalls in legacy environments.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

10 years agoSUNRPC: Simplify synopsis of rpcb_local_clnt()
Chuck Lever [Thu, 3 Dec 2009 20:58:56 +0000]
SUNRPC: Simplify synopsis of rpcb_local_clnt()

Clean up: At one point, rpcb_local_clnt() handled IPv6 loopback
addresses too, but it doesn't any more; only IPv4 loopback is used
now.  Get rid of the @addr and @addrlen arguments to
rpcb_local_clnt().

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

10 years agoSUNRPC: Allow RPCs to fail quickly if the server is unreachable
Chuck Lever [Thu, 3 Dec 2009 20:58:56 +0000]
SUNRPC: Allow RPCs to fail quickly if the server is unreachable

The kernel sometimes makes RPC calls to services that aren't running.
Because the kernel's RPC client always assumes the hard retry semantic
when reconnecting a connection-oriented RPC transport, the underlying
reconnect logic takes a long while to time out, even though the remote
may have responded immediately with ECONNREFUSED.

In certain cases, like upcalls to our local rpcbind daemon, or for NFS
mount requests, we'd like the kernel to fail immediately if the remote
service isn't reachable.  This allows another transport to be tried
immediately, or the pending request can be abandoned quickly.

Introduce a per-request flag which controls how call_transmit_status()
behaves when request transmission fails because the server cannot be
reached.

We don't want soft connection semantics to apply to other errors.  The
default case of the switch statement in call_transmit_status() no
longer falls through; the fall through code is copied to the default
case, and a "break;" is added.

The transport's connection re-establishment timeout is also ignored for
such requests.  We want the request to fail immediately, so the
reconnect delay is skipped.  Additionally, we don't want a connect
failure here to further increase the reconnect timeout value, since
this request will not be retried.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

10 years agoSUNRPC: Check explicitly for tk_status == 0 in call_transmit_status()
Chuck Lever [Thu, 3 Dec 2009 20:58:56 +0000]
SUNRPC: Check explicitly for tk_status == 0 in call_transmit_status()

The success case, where task->tk_status == 0, is by far the most
frequent case in call_transmit_status().

The default: arm of the switch statement in call_transmit_status()
handles the 0 case.  default: was moved close to the top of the switch
statement in call_transmit_status() under the theory that the compiler
places object code for the earliest arms of a switch statement first,
making the CPU do less work.

The default: arm of a switch statement, however, is executed only
after all the other cases have been checked.  Even if the compiler
rearranges the object code, the default: arm is the "last resort",
meaning all of the other cases have been explicitly exhausted.  That
makes the current arrangement about as inefficient as it gets for the
common case.

To fix this, add an explicit check for zero before the switch
statement.  That forces the compiler to do the zero check first, no
matter what optimizations it might try to do to the switch statement.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

10 years agoNFS: Revert default r/wsize behavior
Chuck Lever [Thu, 3 Dec 2009 20:58:56 +0000]
NFS: Revert default r/wsize behavior

When the "rsize=" or "wsize=" mount options are not specified,
text-based mounts have slightly different behavior than legacy binary
mounts.  Text-based mounts use the smaller of the server's maximum
and the client's maximum, but binary mounts use the smaller of the
server's _preferred_ size and the client's maximum.

This difference is actually pretty subtle.  Most servers advertise
the same value as their maximum and their preferred transfer size, so
the end result is the same in most cases.

The reason for this difference is that for text-based mounts, if
r/wsize are not specified, they are set to the largest value supported
by the client.  For legacy mounts, the values are set to zero if these
options are not specified.

nfs_server_set_fsinfo() can negotiate the transfer size defaults
correctly in any case.  There's no need to specify any particular
value as default in the text-based option parsing logic.

Note that nfs4 doesn't use nfs_server_set_fsinfo(), but the mount.nfs4
command does set rsize and wsize to 0 if the user didn't specify these
options.  So, make the same change for text-based NFSv4 mounts.

Thanks to James Pearson <james-p@moving-picture.com> for reporting and
diagnosing the problem.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

10 years agoNFS: Display compressed (shorthand) IPv6 in /proc/mounts
Chuck Lever [Thu, 3 Dec 2009 20:58:56 +0000]
NFS: Display compressed (shorthand) IPv6 in /proc/mounts

Recent changes to snprintf() introduced the %pI6c formatter, which can
display an IPv6 address with standard shorthanding.  Use this new
formatter when displaying IPv6 server addresses in /proc/mounts.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

10 years agoSUNRPC: Display compressed (shorthand) IPv6 presentation addresses
Chuck Lever [Thu, 3 Dec 2009 20:58:56 +0000]
SUNRPC: Display compressed (shorthand) IPv6 presentation addresses

Recent changes to snprintf() introduced the %pI6c formatter, which can
display an IPv6 address with standard shorthanding.  Using a
shorthanded address can save us a few bytes of memory for each stored
presentation address, or a few bytes on the wire when sending these in
a universal address.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

10 years agoNFS: reorder nfs4_sequence_regs to remove 8 bytes of padding on 64 bits
Richard Kennedy [Thu, 3 Dec 2009 20:58:56 +0000]
NFS: reorder nfs4_sequence_regs to remove 8 bytes of padding on 64 bits

reorder nfs4_sequence_args to remove 8 bytes of padding on 64 bit
builds.

The size of this structure drops to 24 bytes from 32 and reduces the
text size of nfs.ko.
On my x86_64 size reports

text       data     bss
2.6.32-rc5  200996    8512     432  209940   33414 nfs.ko
+patch  200884    8512     432  209828   333a4 nfs.ko

Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

10 years agoNFS: convert proto= option to use netids rather than a protoname
Jeff Layton [Thu, 3 Dec 2009 20:58:56 +0000]
NFS: convert proto= option to use netids rather than a protoname

Solaris uses netids as values for the proto= option, so that when
someone specifies "tcp6" they get traffic over TCP + IPv6. Until
recently, this has never really been an issue for Linux since it didn't
support NFS over IPv6. The netid and the protocol name were generally
always the same (modulo any strange configuration in /etc/netconfig).

The solaris manpage documents their proto= option as:

    proto= _netid_ | rdma

This patch is intended to bring Linux closer to how the Solaris proto=
option works, by declaring a static netid mapping in the kernel and
converting the proto= and mountproto= options to follow it and display
the proper values in /proc/mounts.

Much of this functionality will need to be provided by a userspace
mount.nfs patch. Chuck Lever has a patch to change mount.nfs in
the same way. In principle, we could do *all* of this in userspace but
that would mean that the options in /proc/mounts may not match the
options used by userspace.

The alternative to the static mapping here is to add a mechanism to
upcall to userspace for netid's. I'm not opposed to that option, but
it'll probably mean more overhead (and quite a bit more code). Rather
than shoot for that at first, I figured it was probably better to
start simply.

Comments welcome.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

10 years agoThe rpc server does not require that service threads take the BKL.
J. Bruce Fields [Thu, 3 Dec 2009 20:58:33 +0000]
The rpc server does not require that service threads take the BKL.

Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

10 years agoNFSv4: Ensure nfs4_close_context() is declared as static
Trond Myklebust [Thu, 3 Dec 2009 20:54:02 +0000]
NFSv4: Ensure nfs4_close_context() is declared as static

Fix another 'sparse' warning in fs/nfs/nfs4proc.c

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

10 years agoNFSv4: Ensure nfs_dns_lookup() and nfs_dns_update() are declared static
Trond Myklebust [Thu, 3 Dec 2009 20:54:01 +0000]
NFSv4: Ensure nfs_dns_lookup() and nfs_dns_update() are declared static

Fix two 'sparse' warnings in fs/nfs/dns_resolve.c

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

10 years agoNFSv4: Fix up error handling in the state manager main loop.
Trond Myklebust [Thu, 3 Dec 2009 20:53:22 +0000]
NFSv4: Fix up error handling in the state manager main loop.

The nfs4_state_manager should not be looking at the error values when
deciding whether or not to loop round in order to handle a higher priority
state recovery task. It should rather be looking at the clp->cl_state.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

10 years agoNFSv4: Handle NFS4ERR_GRACE when recovering an expired lease.
Trond Myklebust [Thu, 3 Dec 2009 20:53:21 +0000]
NFSv4: Handle NFS4ERR_GRACE when recovering an expired lease.

If our lease expires, and the server reboots while we're recovering, we
need to be able to wait until the grace period is over.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

10 years agoNFSv4: Ensure the state manager handles NFS4ERR_NO_GRACE correctly
Trond Myklebust [Thu, 3 Dec 2009 20:53:21 +0000]
NFSv4: Ensure the state manager handles NFS4ERR_NO_GRACE correctly

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

10 years agoNFSv4: The state manager shouldn't exit on errors that were handled
Trond Myklebust [Thu, 3 Dec 2009 20:53:20 +0000]
NFSv4: The state manager shouldn't exit on errors that were handled

nfs4_recovery_handle_error() will correctly handle errors such as
NFS4ERR_CB_PATH_DOWN, however because they are still passed back to the
main loop in nfs4_state_manager(), they can cause the latter to exit
prematurely.

Fix this by letting nfs4_recovery_handle_error() change the error value in
cases where there is no action required by the caller.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

10 years agoNFSv4: Fix up the callers of nfs4_state_end_reclaim_reboot
Trond Myklebust [Thu, 3 Dec 2009 20:52:41 +0000]
NFSv4: Fix up the callers of nfs4_state_end_reclaim_reboot

In practice, we need to ensure that we call nfs4_state_end_reclaim_reboot
in 2 cases:

 - If we lose the lease while we were reclaiming state
OR
 - After we're done with reboot recovery

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

10 years agoNFSv4: Fix a potential state manager deadlock when returning delegations
Trond Myklebust [Thu, 3 Dec 2009 13:10:17 +0000]
NFSv4: Fix a potential state manager deadlock when returning delegations

The nfsv4 state manager could potentially deadlock inside
__nfs_inode_return_delegation() if the server reboots, so that the calls to
nfs_msync_inode() end up waiting on state recovery to complete.

Also ensure that if a server reboot or network partition causes us to have
to stop returning delegations, that NFS4CLNT_DELEGRETURN is set so that
the state manager can resume any outstanding delegation returns after it
has dealt with the state recovery situation.

Finally, ensure that the state manager doesn't wait for the DELEGRETURN
call to complete. It doesn't need to, and that too can cause a deadlock.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

10 years agoRe: acl trouble after upgrading ubuntu
J. Bruce Fields [Thu, 3 Dec 2009 13:10:17 +0000]
Re: acl trouble after upgrading ubuntu

Subject: [PATCH] nfs: fix acl decoding

Commit 28f566942c6b1d929f5e240e69e7081b77b238d3 "NFS: use dynamically
computed compound_hdr.replen for xdr_inline_pages offset" accidentally
changed the amount of space to allow for the acl reply, resulting in an
IO error on attempts to get an acl.

Reported-by: Paul Rudin <paul@rudin.co.uk>
Cc: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

10 years agoRPC: Fix two potential races in put_rpccred
Trond Myklebust [Thu, 3 Dec 2009 13:10:17 +0000]
RPC: Fix two potential races in put_rpccred

It is possible for rpcauth_destroy_credcache() to cause the rpc credentials
to be unhashed while put_rpccred is waiting for the rpc_credcache_lock on
another cpu. Should this happen, then we can end up calling
hlist_del_rcu(&cred->cr_hash) a second time in put_rpccred, thus causing
list corruption.

Should the credential actually be hashed, it is also possible for
rpcauth_lookup_credcache to find and reference it before we get round to
unhashing it. In this case, the call to rpcauth_unhash_cred will fail, and
so we should just exit without destroying the cred.

Reported-by: Neil Brown <neilb@suse.de>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

10 years agoSUNRPC: Ensure that we honour autoclose before attempting to reconnect
Trond Myklebust [Thu, 3 Dec 2009 13:10:17 +0000]
SUNRPC: Ensure that we honour autoclose before attempting to reconnect

If the XPRT_CLOSE_WAIT flag is set, we need to ensure that we call
xprt->ops->close() while holding xprt_lock_write() before we can
start reconnecting.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

10 years agoNFS: BKL removal from the mount code...
Trond Myklebust [Thu, 3 Dec 2009 13:09:56 +0000]
NFS: BKL removal from the mount code...

None of the code in nfs_umount_begin() or nfs_remount() has any BKL
dependency.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

10 years agoLinux 2.6.32
Linus Torvalds [Thu, 3 Dec 2009 03:51:21 +0000]
Linux 2.6.32

10 years agoVIDEO: Correct use of request_region/request_mem_region
Julia Lawall [Sun, 9 Aug 2009 09:42:32 +0000]
VIDEO: Correct use of request_region/request_mem_region

request_region should be used with release_region, not request_mem_region.

Geert Uytterhoeven pointed out that in the case of drivers/video/gbefb.c,
the problem is actually the other way around; request_mem_region should be
used instead of request_region.

The semantic patch that finds/fixes this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r1@
expression start;
@@

request_region(start,...)

@b1@
expression r1.start;
@@

request_mem_region(start,...)

@depends on !b1@
expression r1.start;
expression E;
@@

- release_mem_region
+ release_region
  (start,E)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

10 years agoSPI: spi_txx9: Fix bit rate calculation
Atsushi Nemoto [Thu, 3 Sep 2009 13:59:01 +0000]
SPI: spi_txx9: Fix bit rate calculation

TXx9 SPI bit rate is calculated by:
        fBR = (spi-baseclk) / (n + 1)
Fix calculation of min_speed_hz, max_speed_hz and n.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

10 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6
Linus Torvalds [Wed, 2 Dec 2009 23:41:49 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/sameo/mfd-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6:
  mfd: Correct WM831X_MAX_ISEL_VALUE

10 years agoInput: i8042 - add Dell Vostro 1320, 1520 and 1720 to the reset list
Anisse Astier [Tue, 1 Dec 2009 09:14:25 +0000]
Input: i8042 - add Dell Vostro 1320, 1520 and 1720 to the reset list

These laptops often leave i8042 in a wierd state resulting in non-
operational touchpad and keyboard.

Signed-off-by: Anisse Astier <anisse@astier.eu>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoMerge branch 'for-linus' of git://neil.brown.name/md
Linus Torvalds [Wed, 2 Dec 2009 23:40:37 +0000]
Merge branch 'for-linus' of git://neil.brown.name/md

* 'for-linus' of git://neil.brown.name/md:
  md: revert incorrect fix for read error handling in raid1.

10 years agoparam: don't complain about unused module parameters.
Rusty Russell [Tue, 1 Dec 2009 04:26:44 +0000]
param: don't complain about unused module parameters.

Jon confirms that recent modprobe will look in /proc/cmdline, so these
cmdline options can still be used.

See http://bugzilla.kernel.org/show_bug.cgi?id=14164

Reported-by: Adam Williamson <awilliam@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoMerge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
Linus Torvalds [Wed, 2 Dec 2009 23:39:20 +0000]
Merge branch 'upstream' of git://ftp.linux-mips.org/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  MIPS: RB532: Fix devices.c compilation.
  MIPS: Fix MIPS I build.

10 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog
Linus Torvalds [Wed, 2 Dec 2009 23:38:49 +0000]
Merge git://git./linux/kernel/git/wim/linux-2.6-watchdog

* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  [PATCH] rc32434_wdt: fix compilation failure
  [WATCHDOG] rc32434_wdt.c: use resource_size()

10 years agomodules: don't export section names of empty sections via sysfs
Helge Deller [Wed, 2 Dec 2009 23:29:15 +0000]
modules: don't export section names of empty sections via sysfs

On the parisc architecture we face for each and every loaded kernel module
this kernel "badness warning":
  sysfs: cannot create duplicate filename '/module/ac97_bus/sections/.text'
  Badness at fs/sysfs/dir.c:487

Reason for that is, that on parisc all kernel modules do have multiple
.text sections due to the usage of the -ffunction-sections compiler flag
which is needed to reach all jump targets on this platform.

An objdump on such a kernel module gives:
Sections:
Idx Name          Size      VMA       LMA       File off  Algn
  0 .note.gnu.build-id 00000024  00000000  00000000  00000034  2**2
                  CONTENTS, ALLOC, LOAD, READONLY, DATA
  1 .text         00000000  00000000  00000000  00000058  2**0
                  CONTENTS, ALLOC, LOAD, READONLY, CODE
  2 .text.ac97_bus_match 0000001c  00000000  00000000  00000058  2**2
                  CONTENTS, ALLOC, LOAD, READONLY, CODE
  3 .text         00000000  00000000  00000000  000000d4  2**0
                  CONTENTS, ALLOC, LOAD, READONLY, CODE
...
Since the .text sections are empty (size of 0 bytes) and won't be
loaded by the kernel module loader anyway, I don't see a reason
why such sections need to be listed under
/sys/module/<module_name>/sections/<section_name> either.

The attached patch does solve this issue by not exporting section
names which are empty.

This fixes bugzilla http://bugzilla.kernel.org/show_bug.cgi?id=14703

Signed-off-by: Helge Deller <deller@gmx.de>
CC: rusty@rustcorp.com.au
CC: akpm@linux-foundation.org
CC: James.Bottomley@HansenPartnership.com
CC: roland@redhat.com
CC: dave@hiauly1.hia.nrc.ca
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6
Linus Torvalds [Wed, 2 Dec 2009 20:44:42 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/lrg/voltage-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6:
  regulator: Initialise wm831x structure pointor for ISINK driver

10 years agoregulator: Initialise wm831x structure pointor for ISINK driver
Mark Brown [Mon, 30 Nov 2009 14:01:56 +0000]
regulator: Initialise wm831x structure pointor for ISINK driver

The version that made it into mainline missed the initialisation of the
chip handle.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

10 years agoMIPS: RB532: Fix devices.c compilation.
Florian Fainelli [Wed, 2 Dec 2009 12:07:01 +0000]
MIPS: RB532: Fix devices.c compilation.

We should now use dev_set_drvdata to set the driver driver_data field.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/747/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

10 years agoMIPS: Fix MIPS I build.
Ralf Baechle [Wed, 2 Dec 2009 11:33:03 +0000]
MIPS: Fix MIPS I build.

Broken by d63c63e889bbeeaa461a8addf1245f89f3ce4ece (lmo) rsp.
f1e39a4a616cd9981a9decfd5332fd07a01abb8b (kernel.org).

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Patchwork: http://patchwork.linux-mips.org/patch/746/

10 years agoMerge branch 'fix' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6
Linus Torvalds [Wed, 2 Dec 2009 16:21:58 +0000]
Merge branch 'fix' of git://git./linux/kernel/git/ycmiao/pxa-linux-2.6

* 'fix' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6:
  [ARM] pxamci: call mmc_remove_host() before freeing resources

10 years ago[ARM] pxamci: call mmc_remove_host() before freeing resources
Daniel Mack [Tue, 1 Dec 2009 17:17:18 +0000]
[ARM] pxamci: call mmc_remove_host() before freeing resources

mmc_remove_host() will cause the mmc core to switch off the bus power by
eventually calling pxamci_set_ios(). This function uses the regulator or
the GPIO which have been freed already.

This causes the following Oops on module unload.

[   49.519649] Unable to handle kernel paging request at virtual address 30303a70
[   49.526878] pgd = c7084000
[   49.529563] [30303a70] *pgd=00000000
[   49.533136] Internal error: Oops: 5 [#1]
[   49.537025] last sysfs file: /sys/devices/platform/pxa27x-ohci/usb1/1-1/1-1:1.0/host0/target0:0:0/0:0:0:0/scsi_level
[   49.547471] Modules linked in: pxamci(-) eeti_ts
[   49.552061] CPU: 0    Not tainted  (2.6.32-rc8 #322)
[   49.557001] PC is at regulator_is_enabled+0x3c/0xbc
[   49.561846] LR is at regulator_is_enabled+0x30/0xbc
[   49.566691] pc : [<c01a2448>]    lr : [<c01a243c>]    psr: 60000013
[   49.566702] sp : c7083e70  ip : 30303a30  fp : 00000000
[   49.578093] r10: c705e200  r9 : c7082000  r8 : c705e2e0
[   49.583280] r7 : c7061340  r6 : c7061340  r5 : c7083e70  r4 : 00000000
[   49.589759] r3 : c04dc434  r2 : c04dc434  r1 : c03eecea  r0 : 00000047
[   49.596241] Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
[   49.603329] Control: 0000397f  Table: a7084018  DAC: 00000015
[   49.609031] Process rmmod (pid: 1101, stack limit = 0xc7082278)
[   49.614908] Stack: (0xc7083e70 to 0xc7084000)
[   49.619238] 3e60:                                     c7082000 c703c4f8 c705ea00 c04f4074
[   49.627366] 3e80: 00000000 c705e3a0 ffffffff c0247ddc c70361a0 00000000 c705e3a0 ffffffff
[   49.635499] 3ea0: c705e200 bf006400 c78c4f00 c705e200 c705e3a0 ffffffff c705e200 ffffffff
[   49.643633] 3ec0: c04d8ac8 c02476d0 ffffffff c0247c60 c705e200 c0248678 c705e200 c0249064
[   49.651765] 3ee0: ffffffff bf006204 c04d8ad0 c04d8ad0 c04d8ac8 bf007490 00000880 c00440c4
[   49.659898] 3f00: 0000b748 c01c5708 bf007490 c01c44c8 c04d8ac8 c04d8afc bf007490 c01c4570
[   49.668031] 3f20: bf007490 bf00750c c04f4258 c01c37a4 00000000 bf00750c c7083f44 c007b014
[   49.676162] 3f40: 4000d000 6d617870 08006963 00000001 00000000 c7085000 00000001 00000000
[   49.684287] 3f60: 4000d000 c7083f8c 00000001 bea01a54 00005401 c7ab1400 c00440c4 00082000
[   49.692420] 3f80: bf00750c 00000880 c7083f8c 00000000 4000cfa8 00000000 00000880 bea01cc8
[   49.700552] 3fa0: 00000081 c0043f40 00000000 00000880 bea01cc8 00000880 00000006 00000000
[   49.708677] 3fc0: 00000000 00000880 bea01cc8 00000081 00000097 0000cca4 0000b748 00000000
[   49.716802] 3fe0: 4001a4f0 bea01cc0 00018bf4 4001a4fc 20000010 bea01cc8 a063e021 a063e421
[   49.724958] [<c01a2448>] (regulator_is_enabled+0x3c/0xbc) from [<c0247ddc>] (mmc_regulator_set_ocr+0x14/0xd8)
[   49.734836] [<c0247ddc>] (mmc_regulator_set_ocr+0x14/0xd8) from [<bf006400>] (pxamci_set_ios+0xd8/0x17c [pxamci])
[   49.745044] [<bf006400>] (pxamci_set_ios+0xd8/0x17c [pxamci]) from [<c02476d0>] (mmc_power_off+0x50/0x58)
[   49.754555] [<c02476d0>] (mmc_power_off+0x50/0x58) from [<c0247c60>] (mmc_detach_bus+0x68/0xc4)
[   49.763207] [<c0247c60>] (mmc_detach_bus+0x68/0xc4) from [<c0248678>] (mmc_stop_host+0xd4/0x1bc)
[   49.771944] [<c0248678>] (mmc_stop_host+0xd4/0x1bc) from [<c0249064>] (mmc_remove_host+0xc/0x20)
[   49.780681] [<c0249064>] (mmc_remove_host+0xc/0x20) from [<bf006204>] (pxamci_remove+0xc8/0x174 [pxamci])
[   49.790211] [<bf006204>] (pxamci_remove+0xc8/0x174 [pxamci]) from [<c01c5708>] (platform_drv_remove+0x1c/0x24)
[   49.800164] [<c01c5708>] (platform_drv_remove+0x1c/0x24) from [<c01c44c8>] (__device_release_driver+0x7c/0xc4)
[   49.810110] [<c01c44c8>] (__device_release_driver+0x7c/0xc4) from [<c01c4570>] (driver_detach+0x60/0x8c)
[   49.819535] [<c01c4570>] (driver_detach+0x60/0x8c) from [<c01c37a4>] (bus_remove_driver+0x90/0xcc)
[   49.828452] [<c01c37a4>] (bus_remove_driver+0x90/0xcc) from [<c007b014>] (sys_delete_module+0x1d8/0x254)
[   49.837891] [<c007b014>] (sys_delete_module+0x1d8/0x254) from [<c0043f40>] (ret_fast_syscall+0x0/0x28)
[   49.847145] Code: eb06c53a e596c030 e1a0500d e59f106c (e59c0040)
[   49.853566] ---[ end trace b5fa66a00cea142f ]---

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Reported-by: Sven Neumann <s.neumann@raumfeld.com>
Cc: Pierre Ossman <pierre@ossman.eu>
Cc: linux-mmc@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: stable@kernel.org
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

10 years ago[PATCH] rc32434_wdt: fix compilation failure
Florian Fainelli [Wed, 2 Dec 2009 12:21:23 +0000]
[PATCH] rc32434_wdt: fix compilation failure

This patch fixes the compilation failure of
rc32434 due to a bad module parameter description.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

10 years ago[WATCHDOG] rc32434_wdt.c: use resource_size()
H Hartley Sweeten [Wed, 25 Nov 2009 02:06:26 +0000]
[WATCHDOG] rc32434_wdt.c: use resource_size()

The size value passed to ioremap_nocache() is not correct.
Use resource_size() to get the correct value.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Phil Sutter <n0-1@freewrt.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

10 years agosysfs: fix SYSFS_DEPRECATED_V2 prompt
Randy Dunlap [Tue, 1 Dec 2009 21:17:50 +0000]
sysfs: fix SYSFS_DEPRECATED_V2 prompt

The SYSFS_DEPRECATED_V2 says "remove" older, deprecated features, but it
actually enables them, so correct this confusing, backwards text.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agortc-x1205: reset clock to sane state after power failure
Johannes Weiner [Tue, 1 Dec 2009 21:17:49 +0000]
rtc-x1205: reset clock to sane state after power failure

When detecting power failure, the probe function would reset the clock
time to defined state.

However, the clock's _date_ might still be bogus and a subsequent probe
fails when sanity-checking these values.

Change the power-failure fixup code to do a full setting of rtc_time,
including a valid date.

Signed-off-by: Johannes Weiner <jw@emlix.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Paul Gortmaker <p_gortmaker@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agortc-x1205: fix rtc_time to y2k register value conversion
Johannes Weiner [Tue, 1 Dec 2009 21:17:48 +0000]
rtc-x1205: fix rtc_time to y2k register value conversion

The possible CCR_Y2K register values are 19 or 20 and struct rtc_time's
tm_year is in years since 1900.

The function translating rtc_time to register values assumes tm_year to be
years since first christmas, though, and we end up storing 0 or 1 in the
CCR_Y2K register, which the hardware does not refuse to do.

A subsequent probing of the clock fails due to the invalid value range in
the register, though.

[ And if it didn't, reading the clock would yield a bogus year because
  the function translating registers to tm_year is assuming a register
  value of 19 or 20. ]

This fixes the conversion from years since 1900 in tm_year to the
corresponding CCR_Y2K value of 19 or 20.

Signed-off-by: Johannes Weiner <jw@emlix.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Paul Gortmaker <p_gortmaker@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoaoe: prevent cache aliases
Peter Horton [Tue, 1 Dec 2009 21:17:46 +0000]
aoe: prevent cache aliases

Prevent the AoE block driver from creating cache aliases of page cache
pages on machines with virtually indexed caches.

Building kernels on an AT91SAM9G20 board without this patch fails with
segmentation faults after a couple of passes.

Signed-off-by: Peter Horton <zero@colonel-panic.org>
Cc: "Ed L. Cashin" <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agogpio: Langwell GPIO driver bugfixes
Alek Du [Tue, 1 Dec 2009 21:17:45 +0000]
gpio: Langwell GPIO driver bugfixes

- Remove wrong and unnecessary unmask operation

- Remove extra GEDR reading

This fixes the loss of interrupts which occurs when two or more pins are
triggered in close succession.

Signed-off-by: Alek Du <alek.du@intel.com>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agokbuild: stepping down as maintainer
Sam Ravnborg [Tue, 1 Dec 2009 21:17:44 +0000]
kbuild: stepping down as maintainer

It has been fun but the last year or more it has been a duty and a burden.
So I leave it open for others to take over.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Anibal Monsalve Salazar <anibal@debian.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agodavinci: fb: fix frame buffer driver issues
Sudhakar Rajashekhara [Tue, 1 Dec 2009 21:17:43 +0000]
davinci: fb: fix frame buffer driver issues

Following issues have been addressed on DA8XX/OMAP-L1XX:

a. Screen misalignment during booting when frame buffer console is
   enabled.

b. Driver was configured always in PSEUDOCOLOR mode.  This patch
   dynamically configures the driver either in PSEUDOCOLOUR or TRUECOLOR
   mode depending on bpp.

c. The RED and BLUE offsets were interchanged resulting in wrong
   bootup logo colour.

This patch has been tested on DA830/OMAP-L137 and DA850/OMAP-L138 EVMs.

Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Cc: Steve Chen <schen@mvista.com>
Cc: Pavel Kiryukhin <pkiryukhin@ru.mvista.com>
Cc: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agodrivers/rtc/rtc-pcf50633.c: fix use after free in pcf50633_rtc_probe()
Dan Carpenter [Tue, 1 Dec 2009 21:17:41 +0000]
drivers/rtc/rtc-pcf50633.c: fix use after free in pcf50633_rtc_probe()

"rtc" is freed and then dereferenced on the next line.  This patch fixes
that.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Cc: Paul Gortmaker <p_gortmaker@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agodrivers/media/dvb/dvb-core/dvb_frontend.c: needs semaphore.h
Andrew Morton [Tue, 1 Dec 2009 21:17:41 +0000]
drivers/media/dvb/dvb-core/dvb_frontend.c: needs semaphore.h

Fixes:

  v4l/dvb_frontend.c: In function 'dvb_frontend_stop':
  v4l/dvb_frontend.c:707: error: implicit declaration of function 'init_MUTEX'

Addresses http://bugzilla.kernel.org/show_bug.cgi?id=14609

Reported-by: <tstrelar@gmail.com>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6
Linus Torvalds [Tue, 1 Dec 2009 18:41:40 +0000]
Merge git://git./linux/kernel/git/gregkh/staging-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6:
  Staging: update TODO files
  Staging: hv: Fix some missing author names
  Staging: hv: Fix vmbus event handler bug
  Staging: hv: Fix argument order in incorrect memset invocations in hyperv driver.

10 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6
Linus Torvalds [Tue, 1 Dec 2009 18:41:05 +0000]
Merge git://git./linux/kernel/git/gregkh/usb-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  USB: Add support for Mobilcom Debitel USB UMTS Surf-Stick to option driver
  USB: work around for EHCI with quirky periodic schedules
  USB: musb: Fix CPPI IRQs not being signaled
  USB: musb: respect usb_request->zero in control requests
  USB: musb: fix ISOC Tx programming for CPPI DMAs
  USB: musb: Remove unwanted message in boot log
  usb: amd5536udc: fixed shared interrupt bug and warning oops
  USB: ftdi_sio: Keep going when write errors are encountered.
  USB: musb_gadget: fix STALL handling
  USB: EHCI: don't send Clear-TT-Buffer following a STALL

10 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6
Linus Torvalds [Tue, 1 Dec 2009 18:40:51 +0000]
Merge git://git./linux/kernel/git/gregkh/tty-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6:
  tty/of_serial: add missing ns16550a id
  bcm63xx_uart: Fix serial driver compile breakage.
  tty_port: handle the nonblocking open of a dead port corner case

10 years agoMerge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
Linus Torvalds [Tue, 1 Dec 2009 16:26:44 +0000]
Merge branch 'upstream' of git://ftp.linux-mips.org/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  MIPS: Loongson: Switch from flatmem to sparsemem
  MIPS: Loongson: Disallow 4kB pages
  MIPS: Add missing definition for MADV_HWPOISON.
  MIPS: Fix build error if __xchg() is not getting inlined.
  MIPS: IP22/IP28 Disable early printk to fix boot problems on some systems.

10 years agoMIPS: Loongson: Switch from flatmem to sparsemem
Wu Zhangjin [Tue, 1 Dec 2009 06:55:42 +0000]
MIPS: Loongson: Switch from flatmem to sparsemem

With flatmem hibernation for Loongson will fail, and there are also some
other problems such as broken files when using NFS or CIFS / Samba.

The config help of sparsemem says:

"This option provides some potential performance benefits, along with
decreased code complexity."

So to avoid the potential problems of FLATMEM, we disable FLATMEM directly
and use SPARSEMEM instead.

Related email thread:

http://groups.google.com/group/loongson-dev/browse_thread/thread/b6b65890ec2b0f24/feb43e5aa7f55d9b?show_docid=feb43e5aa7f55d9b

Reported-by: Tatu Kilappa <tatu.kilappa@gmail.com>
Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Patchwork: http://patchwork.linux-mips.org/patch/737/
Cc: linux-mips@linux-mips.org
Cc: zhangfx@lemote.com
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

10 years agoMIPS: Loongson: Disallow 4kB pages
Wu Zhangjin [Tue, 1 Dec 2009 06:55:25 +0000]
MIPS: Loongson: Disallow 4kB pages

Currently, with PAGE_SIZE_4KB, the kernel for loongson will hang on:

Kernel panic - not syncing: Attempted to kill init!

The possible reason is the cache aliases problem:

Loongson 2F has 64kb, 4 way L1 Cache, the way size is 16kb, which is bigger
then 4kb. so, If using 4kb page size, there is cache aliases problem.
To avoid this kind of problem, extra cache flushing.  The 2nd possible
solution is 16kb page size which avoids cache aliases without the need for
extra cache flushes.  So we disable 4kB pages until the aliasing issue is
solved.

Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Patchwork: http://patchwork.linux-mips.org/patch/736/
Cc: linux-mips@linux-mips.org
Cc: zhangfx@lemote.com
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

10 years agoMIPS: Add missing definition for MADV_HWPOISON.
Ralf Baechle [Thu, 26 Nov 2009 18:28:42 +0000]
MIPS: Add missing definition for MADV_HWPOISON.

Thanks to Joseph S. Myers for reporting this.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Cc: "Joseph S. Myers" <joseph@codesourcery.com>
Patchwork: http://patchwork.linux-mips.org/patch/723/

10 years agoMIPS: Fix build error if __xchg() is not getting inlined.
Ralf Baechle [Tue, 24 Nov 2009 13:16:02 +0000]
MIPS: Fix build error if __xchg() is not getting inlined.

If __xchg() is not getting inlined the outline version of the function
will have a reference to __xchg_called_with_bad_pointer() which does not
exist remaining.  Fixed by using BUILD_BUG_ON() to check for allowable
operand sizes.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Patchwork: http://patchwork.linux-mips.org/patch/705/

10 years agoMIPS: IP22/IP28 Disable early printk to fix boot problems on some systems.
Martin Michlmayr [Thu, 19 Nov 2009 16:40:09 +0000]
MIPS: IP22/IP28 Disable early printk to fix boot problems on some systems.

Some Debian users have reported that the kernel hangs early during boot on
some IP22 systems.  Thomas Bogendoerfer found that this is due to a "bad
interaction between CONFIG_EARLY_PRINTK and overwritten prom memory during
early boot".  Since there's no fix yet, disable CONFIG_EARLY_PRINTK for now.

Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Cc: linux-mips@linux-mips.org
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Dmitri Vorobiev <dmitri.vorobiev@gmail.com>
Patchwork: http://patchwork.linux-mips.org/patch/702/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

10 years agoSLOW_WORK: Move slow_work's proc file to debugfs
David Howells [Tue, 1 Dec 2009 15:36:11 +0000]
SLOW_WORK: Move slow_work's proc file to debugfs

Move slow_work's debugging proc file to debugfs.

Signed-off-by: David Howells <dhowells@redhat.com>
Requested-and-acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88...
Linus Torvalds [Tue, 1 Dec 2009 15:36:23 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/mattst88/alpha-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha-2.6:
  alpha: Fixup last users of irq_chip->typename
  Alpha: Rearrange thread info flags fixing two regressions
  arch/alpha/kernel: Add kmalloc NULL tests
  arch/alpha/kernel/sys_ruffian.c: Use DIV_ROUND_CLOSEST

10 years agoCacheFiles: Update IMA counters when using dentry_open
Marc Dionne [Tue, 1 Dec 2009 14:09:24 +0000]
CacheFiles: Update IMA counters when using dentry_open

When IMA is active, using dentry_open without updating the
IMA counters will result in free/open imbalance errors when
fput is eventually called.

Signed-off-by: Marc Dionne <marc.c.dionne@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoSLOW_WORK: Fix the CONFIG_MODULES=n case
David Howells [Tue, 1 Dec 2009 13:52:08 +0000]
SLOW_WORK: Fix the CONFIG_MODULES=n case

Commits 3d7a641 ("SLOW_WORK: Wait for outstanding work items belonging to a
module to clear") introduced some code to make sure that all of a module's
slow-work items were complete before that module was removed, and commit
3bde31a ("SLOW_WORK: Allow a requeueable work item to sleep till the thread is
needed") further extended that, breaking it in the process if CONFIG_MODULES=n:

CC kernel/slow-work.o
  kernel/slow-work.c: In function 'slow_work_execute':
  kernel/slow-work.c:313: error: 'slow_work_thread_processing' undeclared (first use in this function)
  kernel/slow-work.c:313: error: (Each undeclared identifier is reported only once
  kernel/slow-work.c:313: error: for each function it appears in.)
  kernel/slow-work.c: In function 'slow_work_wait_for_items':
  kernel/slow-work.c:950: error: 'slow_work_unreg_sync_lock' undeclared (first use in this function)
  kernel/slow-work.c:951: error: 'slow_work_unreg_wq' undeclared (first use in this function)
  kernel/slow-work.c:961: error: 'slow_work_unreg_work_item' undeclared (first use in this function)
  kernel/slow-work.c:974: error: 'slow_work_unreg_module' undeclared (first use in this function)
  kernel/slow-work.c:977: error: 'slow_work_thread_processing' undeclared (first use in this function)
  make[1]: *** [kernel/slow-work.o] Error 1

Fix this by:

 (1) Extracting the bits of slow_work_execute() that are contingent on
     CONFIG_MODULES, and the bits that should be, into inline functions and
     placing them into the #ifdef'd section that defines the relevant variables
     and adding stubs for moduleless kernels.  This allows the removal of some
     #ifdefs.

 (2) #ifdef'ing out the contents of slow_work_wait_for_items() in moduleless
     kernels.

The four functions related to handling module unloading synchronisation (and
their associated variables) could be offloaded into a separate .c file, but
each function is only used once and three of them are tiny, so doing so would
prevent them from being inlined.

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years ago9p: fix build breakage introduced by FS-Cache
David Howells [Tue, 1 Dec 2009 13:38:45 +0000]
9p: fix build breakage introduced by FS-Cache

While building 2.6.32-rc8-git2 for Fedora I noticed the following thinko
in commit 201a15428bd54f83eccec8b7c64a04b8f9431204 ("FS-Cache: Handle
pages pending storage that get evicted under OOM conditions"):

  fs/9p/cache.c: In function '__v9fs_fscache_release_page':
  fs/9p/cache.c:346: error: 'vnode' undeclared (first use in this function)
  fs/9p/cache.c:346: error: (Each undeclared identifier is reported only once
  fs/9p/cache.c:346: error: for each function it appears in.)
  make[2]: *** [fs/9p/cache.o] Error 1

Fix the 9P filesystem to correctly construct the argument to
fscache_maybe_release_page().

Signed-off-by: Kyle McMartin <kyle@redhat.com>
Signed-off-by: Xiaotian Feng <dfeng@redhat.com> [from identical patch]
Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> [from identical patch]
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agomfd: Correct WM831X_MAX_ISEL_VALUE
Mark Brown [Mon, 30 Nov 2009 13:24:18 +0000]
mfd: Correct WM831X_MAX_ISEL_VALUE

There was confusion between the array size and the highest ISEL
value possible.

Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

10 years agomd: revert incorrect fix for read error handling in raid1.
NeilBrown [Tue, 1 Dec 2009 06:30:59 +0000]
md: revert incorrect fix for read error handling in raid1.

commit 4706b349f was a forward port of a fix that was needed
for SLES10.  But in fact it is not needed in mainline because
the earlier commit dd00a99e7a fixes the same problem in a
better way.
Further, this commit introduces a bug in the way it interacts with
the automatic read-error-correction.  If, after a read error is
successfully corrected, the same disk is chosen to re-read - the
re-read won't be attempted but an error will be returned instead.

After reverting that commit, there is the possibility that a
read error on a read-only array (where read errors cannot
be corrected as that requires a write) will repeatedly read the same
device and continue to get an error.
So in the "Array is readonly" case, fail the drive immediately on
a read error.

Signed-off-by: NeilBrown <neilb@suse.de>
Cc: stable@kernel.org

10 years agoalpha: Fixup last users of irq_chip->typename
Thomas Gleixner [Tue, 1 Dec 2009 03:51:31 +0000]
alpha: Fixup last users of irq_chip->typename

The typename member of struct irq_chip was kept for migration purposes
and is obsolete since more than 2 years. Fix up the leftovers.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Henderson <rth@twiddle.net>
Cc: linux-alpha@vger.kernel.org
Signed-off-by: Matt Turner <mattst88@gmail.com>

10 years agoAlpha: Rearrange thread info flags fixing two regressions
Michael Cree [Tue, 1 Dec 2009 03:44:40 +0000]
Alpha: Rearrange thread info flags fixing two regressions

The removal of the TIF_NOTIFY_RESUME flag, commit a583f1b54249b
"remove unused TIF_NOTIFY_RESUME flag," resulted in incorrect
setting of the unaligned access control flags by the prctl syscall.

The re-addition of the TIF_NOTIFY_RESUME flag, commit d0420c83f39f
"KEYS: Extend TIF_NOTIFY_RESUME to (almost) all architectures [try #6]"
further caused problems, namely incorrect operands to assembler code
as evidenced by:

AS      arch/alpha/kernel/entry.o
arch/alpha/kernel/entry.S: Assembler messages:
arch/alpha/kernel/entry.S:326: Warning: operand out of range
(0x0000000000000406 is not between 0x0000000000000000 and
0x00000000000000ff)

Both regressions fixed by (1) rearranging TIF_NOTIFY_RESUME flag to be
in lower 8 bits of the thread info flags, and (2) making sure that
ALPHA_UAC_SHIFT matches the rearrangement of the thread info flags.

Signed-off-by: Michael Cree <mcree@orcon.net.nz>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: David Howells <dhowells@redhat.com>,
Signed-off-by: Matt Turner <mattst88@gmail.com>

10 years agoMerge branch 'security' of git://git.kernel.org/pub/scm/linux/kernel/git/linville...
Linus Torvalds [Tue, 1 Dec 2009 00:47:16 +0000]
Merge branch 'security' of git://git./linux/kernel/git/linville/wireless-2.6

* 'security' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6:
  mac80211: fix spurious delBA handling
  mac80211: fix two remote exploits

10 years agoUSB: Add support for Mobilcom Debitel USB UMTS Surf-Stick to option driver
Gernot Hillier [Fri, 27 Nov 2009 12:49:23 +0000]
USB: Add support for Mobilcom Debitel USB UMTS Surf-Stick to option driver

This patch adds the vendor and device id for the Mobilcom Debitel UMTS surf
stick (a.k.a. 4G Systems XSStick W14, MobiData MBD-200HU, ...).

To see these ids, you need to switch the stick to modem operation first
with the help of usb_modeswitch. This makes it switch from 1c9e:f000 to
1c9e:9603 and thus be recognized by the option driver.

Signed-off-by: Gernot Hillier <gernot@hillier.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoUSB: work around for EHCI with quirky periodic schedules
Oliver Neukum [Fri, 27 Nov 2009 14:17:59 +0000]
USB: work around for EHCI with quirky periodic schedules

a quirky chipset needs periodic schedules to run for a minimum
time before they can be disabled again. This enforces the requirement
with a time stamp and a calculated delay

Signed-off-by: Oliver Neukum <oliver@neukum.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoUSB: musb: Fix CPPI IRQs not being signaled
Daniel Glöckner [Tue, 17 Nov 2009 09:52:57 +0000]
USB: musb: Fix CPPI IRQs not being signaled

On tx channel abort a cppi interrupt is generated for a short time by
setting the lowest bit of the TCPPICOMPPTR register. It is then reset
immediately by clearing the bit. When the interrupt handler is run,
it does not detect an interrupt in the TCPPIMSKSR or RCPPIMSKSR
registers and thus exits early without writing the TCPPIEOIR register.
It appears that this inhibits further cppi interrupts until the handler
is called by chance, f.ex. from davinci_interrupt().

By moving the unmasking of the interrupt below the writes to
TCPPICOMPPTR, no interrupt is generated and no write to TCPPIEOIR is
necessary.

Signed-off-by: Daniel Glöckner <dg@emlix.com>
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoUSB: musb: respect usb_request->zero in control requests
Daniel Glöckner [Tue, 17 Nov 2009 09:52:56 +0000]
USB: musb: respect usb_request->zero in control requests

In gadget mode the answer to a control request should be followed by
a zero-length packet if the amount transferred is an exact multiple of
the endpoint's packet size and the requests has its "zero" flag set.

This patch prevents the request from being immediately removed from the
queue when a control IN transfer ends on a full packet and "zero" is set.
The next time ep0_txstate is entered, a zero-length packet is queued and
the request is removed as fifo_count is 0.

Signed-off-by: Daniel Glöckner <dg@emlix.com>
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoUSB: musb: fix ISOC Tx programming for CPPI DMAs
Ajay Kumar Gupta [Tue, 17 Nov 2009 09:52:55 +0000]
USB: musb: fix ISOC Tx programming for CPPI DMAs

Isochronous Tx DMA is getting programmed but never getting started
for CPPI and TUSB DMAs and thus Isochronous Tx doesn't work.

Fixing it by starting DMAs using musb_h_tx_dma_start().

Signed-off-by: Swaminathan S <swami.iyer@ti.com>
Signed-off-by: Babu Ravi <ravibabu@ti.com>
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoUSB: musb: Remove unwanted message in boot log
Ajay Kumar Gupta [Tue, 17 Nov 2009 09:52:54 +0000]
USB: musb: Remove unwanted message in boot log

Removes below unnecessary log of almost 28 lines during boot.

musb_hdrc: hw_ep 0shared, max 64
musb_hdrc: hw_ep 1tx, max 512
musb_hdrc: hw_ep 1rx, max 512
...
...
musb_hdrc: hw_ep 13shared, max 4096
musb_hdrc: hw_ep 14shared, max 1024
musb_hdrc: hw_ep 15shared, max 1024

Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Acked-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agousb: amd5536udc: fixed shared interrupt bug and warning oops
Thomas Dahlmann [Tue, 17 Nov 2009 22:18:27 +0000]
usb: amd5536udc: fixed shared interrupt bug and warning oops

- fixed shared interrupt bug reported by Vadim Lobanov
 - fixed possible warning oops on driver unload when connected
 - prevent interrupt flood in PIO mode ("modprobe amd5536udc use_dma=0")
   when using gadget ether

Signed-off-by: Thomas Dahlmann <dahlmann.thomas@arcor.de>
Cc: Robert Richter <robert.richter@amd.com>
Cc: David Brownell <david-b@pacbell.net>
Cc: stable <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>