9 years agopowerpc/5200: update defconfigs
Grant Likely [Wed, 30 Dec 2009 22:21:11 +0000]
powerpc/5200: update defconfigs

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

9 years agoLinux 2.6.33-rc2
Linus Torvalds [Thu, 24 Dec 2009 21:09:41 +0000]
Linux 2.6.33-rc2

9 years agoMerge branch 'sysctl' of git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-misc-2.6
Linus Torvalds [Thu, 24 Dec 2009 21:01:29 +0000]
Merge branch 'sysctl' of git://git./linux/kernel/git/ak/linux-misc-2.6

* 'sysctl' of git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-misc-2.6:
  SYSCTL: Add a mutex to the page_alloc zone order sysctl
  SYSCTL: Print binary sysctl warnings (nearly) only once

9 years agoMerge branch 'hwpoison' of git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux...
Linus Torvalds [Thu, 24 Dec 2009 21:01:13 +0000]
Merge branch 'hwpoison' of git://git./linux/kernel/git/ak/linux-mce-2.6

* 'hwpoison' of git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-mce-2.6:
  HWPOISON: Add PROC_FS dependency to hwpoison injector v2

9 years agoMerge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux...
Linus Torvalds [Thu, 24 Dec 2009 21:00:02 +0000]
Merge branch 'release' of git://git./linux/kernel/git/lenb/linux-acpi-2.6

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (34 commits)
  classmate-laptop: add support for Classmate PC ACPI devices
  hp-wmi: Fix two memleaks
  acer-wmi, msi-wmi: Remove needless DMI MODULE_ALIAS
  dell-wmi: do not keep driver loaded on unsupported boxes
  wmi: Free the allocated acpi objects through wmi_get_event_data
  drivers/platform/x86/acerhdf.c: check BIOS information whether it begins with string of table
  acerhdf: add new BIOS versions
  acerhdf: limit modalias matching to supported
  toshiba_acpi: convert to seq_file
  asus_acpi: convert to seq_file
  ACPI: do not select ACPI_DOCK from ATA_ACPI
  sony-laptop: enumerate rfkill devices using SN06
  sony-laptop: rfkill support for newer models
  ACPI: fix OSC regression that caused aer and pciehp not to load
  MAINTAINERS: add maintainer for msi-wmi driver
  fujitu-laptop: fix tests of acpi_evaluate_integer() return value
  arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c: avoid cross-CPU interrupts by using smp_call_function_any()
  ACPI: processor: remove _PDC object list from struct acpi_processor
  ACPI: processor: change acpi_processor_set_pdc() interface
  ACPI: processor: open code acpi_processor_cleanup_pdc
  ...

9 years agoMerge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec...
Linus Torvalds [Thu, 24 Dec 2009 20:59:11 +0000]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/jlbec/ocfs2

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2:
  ocfs2/trivial: Use le16_to_cpu for a disk value in xattr.c
  ocfs2/trivial: Use proper mask for 2 places in hearbeat.c
  Ocfs2: Let ocfs2 support fiemap for symlink and fast symlink.
  Ocfs2: Should ocfs2 support fiemap for S_IFDIR inode?
  ocfs2: Use FIEMAP_EXTENT_SHARED
  fiemap: Add new extent flag FIEMAP_EXTENT_SHARED
  ocfs2: replace u8 by __u8 in ocfs2_fs.h
  ocfs2: explicit declare uninitialized var in user_cluster_connect()
  ocfs2-devel: remove redundant OCFS2_MOUNT_POSIX_ACL check in ocfs2_get_acl_nolock()
  ocfs2: return -EAGAIN instead of EAGAIN in dlm
  ocfs2/cluster: Make fence method configurable - v2
  ocfs2: Set MS_POSIXACL on remount
  ocfs2: Make acl use the default
  ocfs2: Always include ACL support

9 years agoMerge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Thu, 24 Dec 2009 20:57:45 +0000]
Merge branch 'for-linus' of /home/rmk/linux-2.6-arm

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm:
  VIDEO: cyberpro: pci_request_regions needs a persistent name
  ARM: dma-isa: request cascade channel after registering it
  ARM: footbridge: trim down old ISA rtc setup
  ARM: fix PAGE_KERNEL
  ARM: Fix wrong shared bit for CPU write buffer bug test
  ARM: 5857/1: ARM: dmabounce: fix build
  ARM: 5856/1: Fix bug of uart0 platfrom data for nuc900
  ARM: 5855/1: putc support for nuc900
  ARM: 5854/1: fix compiling error for NUC900
  ARM: 5849/1: ARMv7: fix Oprofile events count
  ARM: add missing include to nwflash.c
  ARM: Kill CONFIG_CPU_32
  ARM: Convert VFP/Crunch/XscaleCP thread_release() to exit_thread()
  ARM: 5853/1: ARM: Fix build break on ARM v6 and v7

9 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp
Linus Torvalds [Thu, 24 Dec 2009 20:55:40 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/bp/bp

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  edac, pci: remove pesky debug printk
  amd64_edac: restrict PCI config space access
  amd64_edac: fix forcing module load/unload
  amd64_edac: make driver loading more robust
  amd64_edac: fix driver instance freeing
  amd64_edac: fix K8 chip select reporting

9 years agoMerge branch 'sh/for-2.6.33' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal...
Linus Torvalds [Thu, 24 Dec 2009 20:54:02 +0000]
Merge branch 'sh/for-2.6.33' of git://git./linux/kernel/git/lethal/sh-2.6

* 'sh/for-2.6.33' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  sh: Ensure all PG_dcache_dirty pages are written back.
  sh: mach-ecovec24: setup.c detailed correction
  serial: sh-sci: Convert tremaining ctrl_xxx I/O routines to __raw_xxx.
  serial: sh-sci: earlyprintk zero uartclk fix
  sh: Only use bl bit toggling for sleeping idle.
  sh: Restore bl bit toggling in idle loop.
  sh: Fix up MAX_DMA_CHANNELS definition when DMA is disabled.
  sh: dmaengine support for SH7785
  sh: dmaengine support for sh7724.

9 years agoVIDEO: cyberpro: pci_request_regions needs a persistent name
Russell King [Thu, 24 Dec 2009 13:36:21 +0000]
VIDEO: cyberpro: pci_request_regions needs a persistent name

Don't pass a name pointer from the kernel stack, it will not survive
and will result in corrupted /proc/iomem output.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

9 years agoARM: dma-isa: request cascade channel after registering it
Russell King [Thu, 24 Dec 2009 14:45:39 +0000]
ARM: dma-isa: request cascade channel after registering it

We can't request the cascade channel before it's been registered, so
move it afterwards.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

9 years agoARM: footbridge: trim down old ISA rtc setup
Russell King [Thu, 24 Dec 2009 12:52:44 +0000]
ARM: footbridge: trim down old ISA rtc setup

This fixes a "start_kernel(): bug: interrupts were enabled early".

rtc_cmos now takes care of initializing the ISA RTC and reading the
current time and date from it; there's no need to repeat that here,
thereby causing interrupts to be enabled too early.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

9 years agoARM: fix PAGE_KERNEL
Russell King [Thu, 24 Dec 2009 10:16:21 +0000]
ARM: fix PAGE_KERNEL

PAGE_KERNEL should not be executable; any area marked executable can
be prefetched into the instruction cache.  We don't want vmalloc areas
to be read in this way.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

9 years agoedac, pci: remove pesky debug printk
Borislav Petkov [Mon, 21 Dec 2009 18:11:12 +0000]
edac, pci: remove pesky debug printk

Do not spam the logs needlessly with the sole info that
edac_pci_dev_parity_clear is being called.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>

9 years agoamd64_edac: restrict PCI config space access
Borislav Petkov [Mon, 21 Dec 2009 18:21:41 +0000]
amd64_edac: restrict PCI config space access

Do not access F2x19[0,4] on K8 since they're undefined there.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>

9 years agoamd64_edac: fix forcing module load/unload
Borislav Petkov [Mon, 21 Dec 2009 17:55:18 +0000]
amd64_edac: fix forcing module load/unload

Clear the override flag after force-loading the module.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>

9 years agoamd64_edac: make driver loading more robust
Borislav Petkov [Mon, 21 Dec 2009 17:13:01 +0000]
amd64_edac: make driver loading more robust

Currently, the module does not initialize fully when the DIMMs aren't
ECC but remains still loaded. Propagate the error when no instance of
the driver is properly initialized and prevent further loading.

Reorganize and polish error handling in amd64_edac_init() while at it.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>

9 years agoamd64_edac: fix driver instance freeing
Borislav Petkov [Mon, 21 Dec 2009 14:15:59 +0000]
amd64_edac: fix driver instance freeing

Fix use-after-free errors by pushing all memory-freeing calls to the end
of amd64_remove_one_instance().

Reported-by: Darren Jenkins <darrenrjenkins@gmail.com>
LKML-Reference: <1261370306.11354.52.camel@ICE-BOX>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>

9 years agoamd64_edac: fix K8 chip select reporting
Borislav Petkov [Mon, 21 Dec 2009 13:52:53 +0000]
amd64_edac: fix K8 chip select reporting

Fix the case when amd64_debug_display_dimm_sizes() reports only half the
amount of DRAM on it because it doesn't account for when the single DCT
operates in 128-bit mode and merges chip selects from different DIMMs.

Reported-by: Johannes Hirte <johannes.hirte@fem.tu-ilmenau.de>
LKML-Reference: <200912112202.48173.johannes.hirte@fem.tu-ilmenau.de>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>

9 years agoMerge branch 'misc-2.6.33' into release
Len Brown [Thu, 24 Dec 2009 06:19:00 +0000]
Merge branch 'misc-2.6.33' into release

9 years agoMerge branch 'tc1100-wmi' into release
Len Brown [Thu, 24 Dec 2009 06:17:46 +0000]
Merge branch 'tc1100-wmi' into release

9 years agoMerge branch 'sony' into release
Len Brown [Thu, 24 Dec 2009 06:17:41 +0000]
Merge branch 'sony' into release

9 years agoMerge branch 'classmate' into release
Len Brown [Thu, 24 Dec 2009 06:17:31 +0000]
Merge branch 'classmate' into release

9 years agoMerge branch 'pdc' into release
Len Brown [Thu, 24 Dec 2009 06:17:21 +0000]
Merge branch 'pdc' into release

9 years agoMerge branches 'bugzilla-14446', 'bugzilla-14753' and 'bugzilla-14824' into release
Len Brown [Thu, 24 Dec 2009 06:17:01 +0000]
Merge branches 'bugzilla-14446', 'bugzilla-14753' and 'bugzilla-14824' into release

9 years agoMerge branch 'osc' into release
Len Brown [Thu, 24 Dec 2009 06:16:35 +0000]
Merge branch 'osc' into release

9 years agoclassmate-laptop: add support for Classmate PC ACPI devices
Thadeu Lima de Souza Cascardo [Tue, 22 Dec 2009 00:20:01 +0000]
classmate-laptop: add support for Classmate PC ACPI devices

This add supports for devices like keyboard, backlight, tablet and
accelerometer.

This work is supported by International Syst S/A.

[randy.dunlap@oracle.com: cmpc_acpi: depends on ACPI]
[akpm@linux-foundation.org: readability tweaks]
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>

9 years agoMerge branch 'sh/g3-prep' into sh/for-2.6.33
Paul Mundt [Thu, 24 Dec 2009 06:16:02 +0000]
Merge branch 'sh/g3-prep' into sh/for-2.6.33

9 years agosh: Ensure all PG_dcache_dirty pages are written back.
Markus Pietrek [Thu, 24 Dec 2009 06:12:02 +0000]
sh: Ensure all PG_dcache_dirty pages are written back.

With some of the cache rework an address aliasing optimization was added,
but this managed to fail on certain mappings resulting in pages with
PG_dcache_dirty set never writing back their dcache lines. This patch
reverts to the earlier behaviour of simply always writing back when the
dirty bit is set.

Signed-off-by: Markus Pietrek <Markus.Pietrek@emtrion.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

9 years agosh: mach-ecovec24: setup.c detailed correction
Kuninori Morimoto [Thu, 24 Dec 2009 05:27:47 +0000]
sh: mach-ecovec24: setup.c detailed correction

o remove unused define
o add device name comment

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

9 years agohp-wmi: Fix two memleaks
Thomas Renninger [Fri, 18 Dec 2009 14:29:23 +0000]
hp-wmi: Fix two memleaks

Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>

9 years agoserial: sh-sci: Convert tremaining ctrl_xxx I/O routines to __raw_xxx.
Paul Mundt [Thu, 24 Dec 2009 05:52:43 +0000]
serial: sh-sci: Convert tremaining ctrl_xxx I/O routines to __raw_xxx.

ctrl_xxx() is an antiquated SH interface, while __raw_xxx is the standard
API that accomplishes the same thing. As such, this converts the
remaining sh-sci straggles over, which enables the driver to be wired up
for ARM SH-Mobile CPUs as well.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

9 years agoserial: sh-sci: earlyprintk zero uartclk fix
Magnus Damm [Tue, 22 Dec 2009 03:37:28 +0000]
serial: sh-sci: earlyprintk zero uartclk fix

This establishes a sensible max baud rate for the earlyprintk cases where
the port's uartclk has not yet been determined.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

9 years agoacer-wmi, msi-wmi: Remove needless DMI MODULE_ALIAS
Thomas Renninger [Fri, 18 Dec 2009 14:29:22 +0000]
acer-wmi, msi-wmi: Remove needless DMI MODULE_ALIAS

Now that we have WMI autoloading
the DMI matching is not needed anymore.

Signed-off-by: Thomas Renninger <trenn@suse.de>
Acked-by: Carlos Corbacho <carlos@strangeworlds.co.uk>
Acked-by: Anisse Astier <anisse@astier.eu>
Signed-off-by: Len Brown <len.brown@intel.com>

9 years agodell-wmi: do not keep driver loaded on unsupported boxes
Dmitry Torokhov [Fri, 18 Dec 2009 06:19:42 +0000]
dell-wmi: do not keep driver loaded on unsupported boxes

There is no point in having the driver loaded in memory if we fail
to locate particular WMI GUID.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Acked-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>

9 years agowmi: Free the allocated acpi objects through wmi_get_event_data
Anisse Astier [Fri, 4 Dec 2009 09:10:09 +0000]
wmi: Free the allocated acpi objects through wmi_get_event_data

These function allocate an acpi object by calling wmi_get_event_data, which
then calls acpi_evaluate_object, and it is not freed afterwards.

And kernel doc is fixed for parameters of wmi_get_event_data.

Signed-off-by: Anisse Astier <anisse@astier.eu>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Carlos Corbacho <carlos@strangeworlds.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>

9 years agodrivers/platform/x86/acerhdf.c: check BIOS information whether it begins with string...
Peter Feuerer [Tue, 22 Dec 2009 00:20:06 +0000]
drivers/platform/x86/acerhdf.c: check BIOS information whether it begins with string of table

BIOS information is now checked whether it begins with the strings stored
in the BIOS table.  Previous method did a strcmp, what lead to problems if
BIOS information has appended whitespaces.

Signed-off-by: Peter Feuerer <peter@piie.net>
Cc: Borislav Petkov <petkovbb@gmail.com>
Cc: Andreas Mohr <andi@lisas.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>

9 years agoacerhdf: add new BIOS versions
Peter Feuerer [Tue, 22 Dec 2009 00:20:05 +0000]
acerhdf: add new BIOS versions

Add new BIOS versions for following netbooks: Aspire 1810xx, Packard Bell
DOTMU.

Signed-off-by: Peter Feuerer <peter@piie.net>
Cc: Borislav Petkov <petkovbb@gmail.com>
Cc: Andreas Mohr <andi@lisas.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>

9 years agoacerhdf: limit modalias matching to supported
Stefan Bader [Tue, 22 Dec 2009 00:20:04 +0000]
acerhdf: limit modalias matching to supported

BugLink: https://bugs.launchpad.net/ubuntu/+bug/435958

The module alias currently matches any Acer computer but when loaded the
BIOS checks will only succeed on Aspire One models.  This causes a invalid
BIOS warning for all other models (seen on Aspire 4810T).  This is not
fatal but worries users that see this message.  Limiting the moule alias
to models starting with AOA or DOA for Packard Bell.

Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Acked-by: Borislav Petkov <petkovbb@gmail.com>
Acked-by: Peter Feuerer <peter@piie.net>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>

9 years agotoshiba_acpi: convert to seq_file
Alexey Dobriyan [Tue, 22 Dec 2009 00:20:02 +0000]
toshiba_acpi: convert to seq_file

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: John W. Linville <linville@tuxdriver.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>

9 years agoasus_acpi: convert to seq_file
Alexey Dobriyan [Tue, 22 Dec 2009 00:20:01 +0000]
asus_acpi: convert to seq_file

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Karol Kozimor <sziwan@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>

9 years agoACPI: do not select ACPI_DOCK from ATA_ACPI
Carlos R. Mafra [Tue, 22 Dec 2009 21:45:39 +0000]
ACPI: do not select ACPI_DOCK from ATA_ACPI

In March 2008 commit 0ac4a3c2fbbcadc3e96e4dc47d4ae802d66e6f67 ("ACPI: fix
ATA_ACPI build") made CONFIG_ACPI_DOCK be selected by CONFIG_ATA_ACPI because
of a build error when CONFIG_ATA_ACPI=y and CONFIG_ACPI_DOCK=m.

However, in September 2008 commit 898b054f3eec5921320ae8614b5bdd7b07ea5b43
("dock: make dock driver not a module") removed the possibility of having
CONFIG_ACPI_DOCK=m and therefore there is no need for selecting it when
CONFIG_ATA_ACPI=y.

This makes the kernel ~5 Kb smaller for people who don't have a dock by
allowing them to not have ACPI_DOCK compiled-in because of ATA_ACPI=y.

Signed-off-by: Carlos R. Mafra <crmafra@aei.mpg.de>
Cc: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>

9 years agosony-laptop: enumerate rfkill devices using SN06
Mattia Dongili [Wed, 16 Dec 2009 15:08:36 +0000]
sony-laptop: enumerate rfkill devices using SN06

SN06 makes sure we get back a longer buffer which seems to be necessary
going forward as the SNC devices describes more and more devices (or
features more precisely). Moreover SN06 should be called with only the
descriptor offset to make sure we hit the rfkill controlling function
(F124 or F135) with a 0 argument to get a full list of features.

Signed-off-by: Mattia Dongili <malattia@linux.it>
Tested-by: Miguel Rodríguez Pérez <miguelrp@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>

9 years agosony-laptop: rfkill support for newer models
Mattia Dongili [Wed, 16 Dec 2009 15:08:35 +0000]
sony-laptop: rfkill support for newer models

Vaio Type X and possibly other new models use F135 as the radio
frequency controlling function attached to the SNC device. In the
indexed table this corresponds to 0x0135 (surpise!).

Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Len Brown <len.brown@intel.com>

9 years agoMerge branch 'i2c-fixes' of git://git.fluff.org/bjdooks/linux
Linus Torvalds [Thu, 24 Dec 2009 02:27:51 +0000]
Merge branch 'i2c-fixes' of git://git.fluff.org/bjdooks/linux

* 'i2c-fixes' of git://git.fluff.org/bjdooks/linux:
  i2c-omap: OMAP3: Fix I2C lockup during timeout/error cases
  i2c-omap: Don't write IE state in unidle if 0
  i2c-bfin-twi: fix CLKDIV calculation

9 years agoocfs2/trivial: Use le16_to_cpu for a disk value in xattr.c
Tao Ma [Wed, 23 Dec 2009 06:31:15 +0000]
ocfs2/trivial: Use le16_to_cpu for a disk value in xattr.c

In ocfs2_value_metas_in_xattr_header, we should Use
le16_to_cpu for ocfs2_extent_list.l_next_free_rec.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>

9 years agoocfs2/trivial: Use proper mask for 2 places in hearbeat.c
Tao Ma [Tue, 22 Dec 2009 02:32:15 +0000]
ocfs2/trivial: Use proper mask for 2 places in hearbeat.c

I just noticed today that there are 2 places of "mlog(0,...)"
in  fs/ocfs2/cluster/heartbeat.c, but actually have no default
mask prefix in that file.
So change them to mlog(ML_HEARTBEAT,...).

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>

9 years agoOcfs2: Let ocfs2 support fiemap for symlink and fast symlink.
Tristan Ye [Tue, 22 Dec 2009 01:11:58 +0000]
Ocfs2: Let ocfs2 support fiemap for symlink and fast symlink.

For fast symlink, it can be treated the same as inlined files since
the data extent we want to return of both case all were stored in
metadata block. For symlink, it can be simply treated the same as we
did for regular files.

Signed-off-by: Tristan Ye <tristan.ye@oracle.com>
Acked-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>

9 years agoi2c-omap: OMAP3: Fix I2C lockup during timeout/error cases
Manjunatha GK [Fri, 11 Dec 2009 05:39:08 +0000]
i2c-omap: OMAP3: Fix I2C lockup during timeout/error cases

Current OMAP3 I2C driver code does not follow the correct sequence for soft
reset. Due to this, lock up issues are reported during timeout/error cases.

This patch fixes above issue by disabling I2C controller as per OMAP3430 TRM
for soft reset. As per TRM, I2C controller needs to be disabled as a first
step during soft reset.

Here is correct soft reset sequence:
a. Ensure that the module is disabled
(clear the I2Ci.I2C_CON[15] I2C_EN bit to 0).
b. Set the I2Ci.I2C_SYSC[1] SRST bit to 1.
c. Enable the module by setting I2Ci.I2C_CON[15] I2C_EN bit to 1.
d. Check the I2Ci.I2C_SYSS[0] RDONE bit until it is set to 1 to
indicate the software reset is complete.

Tested on Zoom2, Zoom3, 3430SDP and 3630SDP

Signed-off-by: Manjunatha GK <manjugk@ti.com>
Signed-off-by: George, Harith<harith@ti.com>
Acked-by: Varadarajan, Charu Latha<charu@ti.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

9 years agoi2c-omap: Don't write IE state in unidle if 0
Cory Maccarrone [Wed, 23 Dec 2009 01:06:13 +0000]
i2c-omap: Don't write IE state in unidle if 0

Commit ef871432... (i2c-omap: OMAP3: PM: (re)init for every transfer
to support off-mode) introduced a change which make the dev->iestate
contents be written to the OMAP_I2C_IE_REG every time omap_i2c_unidle
is called.  Previously, the state was only written if it wasn't equal
to zero.

In omap_i2c_probe, omap_i2c_unidle() is called prior to omap_i2c_init(),
in which case dev->iestate has not yet been initialized and will be set
to zero.  Having this value written to the registers causes deadlock
while booting.

As such, this change restores the original functionality.

Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

9 years agoi2c-bfin-twi: fix CLKDIV calculation
Sonic Zhang [Mon, 21 Dec 2009 14:28:30 +0000]
i2c-bfin-twi: fix CLKDIV calculation

Calculation of the CLKDIV speed setting should be done using base 10 math
rather than base 2.  We also avoid exceeding the spec due to integer
truncation and a 50% duty cycle.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

9 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog
Linus Torvalds [Thu, 24 Dec 2009 00:12:16 +0000]
Merge git://git./linux/kernel/git/wim/linux-2.6-watchdog

* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  [WATCHDOG] use resource_size()
  [WATCHDOG] iTCO_wdt: add PCI ID for the Intel EP80579 (Tolapai) SoC

9 years agoRevert "x86, ucode-amd: Ensure ucode update on suspend/resume after CPU off/online...
Linus Torvalds [Wed, 23 Dec 2009 23:04:53 +0000]
Revert "x86, ucode-amd: Ensure ucode update on suspend/resume after CPU off/online cycle"

This reverts commit 9f15226e75583547aaf542c6be4bdac1060dd425.  It's just
wrong, and broke resume for Rafael even on a non-AMD CPU.

As Rafael says:
 "... it causes microcode_init_cpu() to be called during resume even for
  CPUs for which there's no microcode to apply.  That, in turn, results
  in executing request_firmware() (on Intel CPUs at least) which doesn't
  work at this stage of resume (we have device interrupts disabled, I/O
  devices are still suspended and so on).

  If I'm not mistaken, the "if (uci->valid)" logic means "if that CPU is
  known to us" , so before commit 9f15226e755 microcode_resume_cpu() was
  called for all CPUs already in the system during suspend, which was
  the right thing to do.  The commit changed it so that the CPUs without
  microcode to apply are now treated as "unknown", which is not quite
  right.

  The problem this commit attempted to solve has to be handled
  differently."

Bisected-and -requested-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoACPI: fix OSC regression that caused aer and pciehp not to load
Shaohua Li [Wed, 23 Dec 2009 09:04:11 +0000]
ACPI: fix OSC regression that caused aer and pciehp not to load

Executing _OSC returns a buffer, which has an acpi object in it.
Don't directly returns the buffer, instead, we return the acpi object's
buffer. This fixes a regression since caller of acpi_run_osc expects
an acpi object's buffer returned.

Tested-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

9 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6
Linus Torvalds [Wed, 23 Dec 2009 21:35:19 +0000]
Merge git://git./linux/kernel/git/gregkh/usb-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (30 commits)
  USB: Fix a bug on appledisplay.c regarding signedness
  USB: option: support hi speed for modem Haier CE100
  USB: audio gadget: free alsa devices when unloading
  USB: audio gadget: fix wTotalLength calculation
  usb: otg: isp1301_omap: fix compile error
  USB: musb: workaround Blackfin FIFO anomalies
  USB: musb: Fix array index out of bounds issue
  USB: musb: Fix null pointer dereference issue
  USB: musb: correct DMA address for tx
  USB: musb: gadget_ep0: avoid SetupEnd interrupt
  USB: musb: fix for crash in DM646x USB when (CPPI)DMA is enabled
  USB: musb: do not work if no gadget driver is loaded
  USB: musb: gadget: set otg tranceiver to idle when registering gadget
  USB: musb: Populate the VBUS GPIO with the correct GPIO number
  USB: musb: MAINTAINERS: Fix my tree's address
  USB: musb: fix compiling warning with min() macro
  USB: musb: move musb_remove to __exit
  USB: musb_gadget: fix kernel oops in txstate()
  USB: ftdi_sio: sort PID/VID entries in new ftdi_sio_ids.h header
  USB: ftdi_sio: isolate all device IDs to new ftdi_sio_ids.h header
  ...

9 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6
Linus Torvalds [Wed, 23 Dec 2009 21:35:03 +0000]
Merge git://git./linux/kernel/git/gregkh/driver-core-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6:
  devtmpfs: unlock mutex in case of string allocation error
  Driver core: export platform_device_register_data as a GPL symbol
  driver core: Prevent reference to freed memory on error path
  Driver-core: Fix bogus 0 error return in device_add()
  Driver core: driver_attribute parameters can often be const*
  Driver core: bin_attribute parameters can often be const*
  Driver core: device_attribute parameters can often be const*
  Doc/stable rules: add new cherry-pick logic
  vfs: get_sb_single() - do not pass options twice
  devtmpfs: Convert dirlock to a mutex

9 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6
Linus Torvalds [Wed, 23 Dec 2009 21:34:26 +0000]
Merge git://git./linux/kernel/git/gregkh/staging-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6:
  Staging/vt66*: kconfig, depends on WLAN
  Staging: batman-adv: introduce missing kfree
  Staging: batman-adv: Add Kconfig dependancies on PROC_FS and PACKET.
  Staging: panel: Adjust range for PANEL_KEYPAD in Kconfig
  Staging: panel: Fix compilation error with custom lcd charset
  Staging: ramzswap: remove ARM specific d-cache hack
  Staging: rtl8192x: fix printk formats
  Staging: wlan-ng: fix Correct size given to memset
  staging: rtl8192su: add USB VID/PID for HWNUm-300
  staging: fix rtl8192su compilation errors with mac80211
  staging: fix rtl8192e compilation errors with mac80211
  Staging: fix rtl8187se compilation errors with mac80211
  Staging: rtl8192su: fix test for negative error in rtl8192_rx_isr()
  Staging: comedi: jr3_pci: Don't ioremap too much space. Check result.
  Staging: comedi: removed "depricated" from COMEDI_CB_BLOCK
  Staging: comedi: usbdux.c: fix locking up of the driver when the comedi ringbuffer runs empty
  Staging: dst: remove from the tree
  Staging: sm7xx: add a new framebuffer driver
  Staging: batman: fix debug Kconfig option

9 years agoMerge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec...
Linus Torvalds [Wed, 23 Dec 2009 21:33:07 +0000]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/jlbec/ocfs2

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2:
  ocfs2: Set i_nlink properly during reflink.
  ocfs2: Add reflinked file's inode to inode hash eariler.
  ocfs2: refcounttree.c cleanup.
  ocfs2: Find proper end cpos for a leaf refcount block.

9 years agoSYSCTL: Add a mutex to the page_alloc zone order sysctl
Andi Kleen [Wed, 23 Dec 2009 20:00:47 +0000]
SYSCTL: Add a mutex to the page_alloc zone order sysctl

The zone list code clearly cannot tolerate concurrent writers (I couldn't
find any locks for that), so simply add a global mutex. No need for RCU
in this case.

Signed-off-by: Andi Kleen <ak@linux.intel.com>

9 years agoSYSCTL: Print binary sysctl warnings (nearly) only once
Andi Kleen [Wed, 23 Dec 2009 20:00:20 +0000]
SYSCTL: Print binary sysctl warnings (nearly) only once

When printing legacy sysctls print the warning message
for each of them only once.  This way there is a guarantee
the syslog won't be flooded for any sane program.

The original attempt at this made the tables non const and stored
the flag inline.

Linus suggested using a separate hash table for this, this is based on a
code snippet from him.

The hash implies this is not exact and can sometimes not print a
new sysctl due to a hash collision, but in practice this should not
be a problem

I used a FNV32 hash over the binary string with a 32byte bitmap. This
gives relatively little collisions when all the predefined binary sysctls
are hashed:

size 256
bucket
length      number
0:          [25]
1:          [67]
2:          [88]
3:          [47]
4:          [22]
5:          [6]
6:          [1]

The worst case is a single collision of 6 hash values.

Signed-off-by: Andi Kleen <ak@linux.intel.com>

9 years agoARM: Fix wrong shared bit for CPU write buffer bug test
Russell King [Wed, 23 Dec 2009 19:54:31 +0000]
ARM: Fix wrong shared bit for CPU write buffer bug test

It is unpredictable to have the same memory mapped using different
shared bit settings for ARMv6 and ARMv7 CPUs.  Fix this for the CPU
write buffer bug test.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

9 years ago[WATCHDOG] use resource_size()
H Hartley Sweeten [Fri, 4 Dec 2009 17:24:04 +0000]
[WATCHDOG] use resource_size()

Use resource_size().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
Cc: Kevin Hilman <khilman@ti.deeprootsystems.com>
Cc: Ulrik Bech Hald <ubh@ti.com>
Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Ming Lei <tom.leiming@gmail.com>
Cc: Vincent Sanders <support@simtec.co.uk>
Acked-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

9 years ago[WATCHDOG] iTCO_wdt: add PCI ID for the Intel EP80579 (Tolapai) SoC
Imre Kaloz [Mon, 7 Dec 2009 19:42:26 +0000]
[WATCHDOG] iTCO_wdt: add PCI ID for the Intel EP80579 (Tolapai) SoC

add PCI ID for the Intel EP80579 (Tolapai) SoC

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

9 years agoUSB: Fix a bug on appledisplay.c regarding signedness
pancho horrillo [Wed, 23 Dec 2009 10:09:13 +0000]
USB: Fix a bug on appledisplay.c regarding signedness

brightness status is reported by the Apple Cinema Displays as an
'unsigned char' (u8) value, but the code used 'char' instead.

Note that he driver was developed on the PowerPC architecture,
where the two types are synonymous, which is not always the case.

Fixed that.  Otherwise the driver will interpret brightness
levels > 127 as negative, and fail to load.

Signed-off-by: pancho horrillo <pancho@pancho.name>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoUSB: option: support hi speed for modem Haier CE100
Donny Kurnia [Wed, 23 Dec 2009 12:03:12 +0000]
USB: option: support hi speed for modem Haier CE100

I made this patch for usbserial driver to add the support for EVDO modem
Haier CE100. The bugs report for this is here:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/490068

This patch based on these post:
http://blankblondtank.wordpress.com/2009/09/04/mengoptimalkan-koneksi-modem-haier-ce-100-cdma-di-linux/
http://tantos.web.id/blogs/how-to-internet-connection-using-cdma-evdo-modem-and-karmic-koala-ubuntu-9-10

I hope this patch can help other that have the Haier C100 modem, mostly in my country, Indonesia.

Signed-off-by: Donny Kurnia <donnykurnia@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoUSB: audio gadget: free alsa devices when unloading
Cliff Cai [Thu, 10 Dec 2009 03:28:39 +0000]
USB: audio gadget: free alsa devices when unloading

Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoUSB: audio gadget: fix wTotalLength calculation
Cliff Cai [Thu, 10 Dec 2009 03:21:12 +0000]
USB: audio gadget: fix wTotalLength calculation

The wTotalLength should contain the sum of the interface and unit
descriptor sizes per the Audio Device Class specification 1.0.

Reported-by: Sergey Lapin <slapin@ossfans.org>
Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agousb: otg: isp1301_omap: fix compile error
Felipe Balbi [Tue, 15 Dec 2009 21:19:52 +0000]
usb: otg: isp1301_omap: fix compile error

commit 91c8a5a9985d5bf9c55f6f82f183f57b050b2a3a broke
compilation of this driver after it introduced
otg_init() as a static inline in <linux/usb/otg.h>

Reported-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoUSB: musb: workaround Blackfin FIFO anomalies
Bryan Wu [Mon, 21 Dec 2009 14:49:52 +0000]
USB: musb: workaround Blackfin FIFO anomalies

Some of these workarounds are already in place, but labeled as affecting
all BF52x parts.  Since we have official anomaly numbers now, use those
defines.  And since writing to the FIFO has a similar hang issue as reading
from the FIFO, implement the workaround there too when necessary.

Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Cc: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoUSB: musb: Fix array index out of bounds issue
Maulik Mankad [Tue, 22 Dec 2009 10:49:53 +0000]
USB: musb: Fix array index out of bounds issue

This patch fixes the below array index out of bounds issue.

Buffer overflow, array index of 'aInfo' may be out of
bounds. Array 'aInfo' of size 78 may use index value(s) 6..84

The data stored in 'aInfo' array exceeds the array size of 78.

This patch increases the size of this array to hold the string
correctly without any memory corruption.

This issue was reported by Klockwork tool.

Signed-off-by: Maulik Mankad <x0082077@ti.com>
Cc: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoUSB: musb: Fix null pointer dereference issue
Maulik Mankad [Tue, 22 Dec 2009 10:48:19 +0000]
USB: musb: Fix null pointer dereference issue

This patch fixes the following NULL pointer dereference issue.

Pointer 'request' returned from call to function 'next_request'
at line 748 may be NULL and may be dereferenced at line 792.

============
Code Snippet
============

748:  request = next_request(musb_ep);
785: if (dma && (csr & MUSB_RXCSR_DMAENAB)) {
csr &= ~(MUSB_RXCSR_AUTOCLEAR
| MUSB_RXCSR_DMAENAB
| MUSB_RXCSR_DMAMODE);
musb_writew(epio, MUSB_RXCSR,
MUSB_RXCSR_P_WZC_BITS | csr);

792:  request->actual += musb_ep->dma->actual_len;

Signed-off-by: Maulik Mankad <x0082077@ti.com>
Cc: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoUSB: musb: correct DMA address for tx
Cliff Cai [Tue, 22 Dec 2009 02:18:02 +0000]
USB: musb: correct DMA address for tx

Since a DMA transfer may need to be kicked off several times to complete,
the DMA start must include the length that has already been transferred.

Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Cc: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoUSB: musb: gadget_ep0: avoid SetupEnd interrupt
Sergei Shtylyov [Tue, 15 Dec 2009 11:30:01 +0000]
USB: musb: gadget_ep0: avoid SetupEnd interrupt

Gadget stalling a zero-length SETUP request results in this error message:

SetupEnd came in a wrong ep0stage idle

In order to avoid it, always set the CSR0.DataEnd bit after detecting a zero-
length request.  Add the missing '\n' to the error message itself as well...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Acked-by: Anand Gadiyar <gadiyar@ti.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoUSB: musb: fix for crash in DM646x USB when (CPPI)DMA is enabled
Swaminathan S [Tue, 15 Dec 2009 11:30:00 +0000]
USB: musb: fix for crash in DM646x USB when (CPPI)DMA is enabled

Race condition exists between the cppi_interrupt handler and
davinci_interrupt handler w.r.t completing a TX IO.  Since DM646x
has seperate DMA and USB endpoint interrupts cppi_interrupt handler
needs to hold the lock while operating on the endpoint.

Update over previous patch to avoid taking the lock if already
taken.  Tested on DM644x, DM355 and DM646x platforms.

Signed-off-by: Swaminathan S <swami.iyer@ti.com>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Acked-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoUSB: musb: do not work if no gadget driver is loaded
Felipe Balbi [Tue, 15 Dec 2009 11:47:30 +0000]
USB: musb: do not work if no gadget driver is loaded

On OTG and gadget-only configurations, we need a gadget driver
in order to work properly, so avoid changing operation modes
when there's no gadget driver loaded.

Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoUSB: musb: gadget: set otg tranceiver to idle when registering gadget
Arnaud Mandy [Tue, 15 Dec 2009 11:29:58 +0000]
USB: musb: gadget: set otg tranceiver to idle when registering gadget

When registering gadget driver, the state of the transceiver
must be set from undefined (no gadget) to b_idle.

Module unload sets the transceiver state to undefined state.
After the first load/unload pair, the reset irq will be lost.

Signed-off-by: Arnaud Mandy <ext-arnaud.2.mandy@nokia.com>
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoUSB: musb: Populate the VBUS GPIO with the correct GPIO number
Swaminathan S [Tue, 15 Dec 2009 11:29:57 +0000]
USB: musb: Populate the VBUS GPIO with the correct GPIO number

This fixes a null-pointer dereference bug.

Signed-off-by: Swaminathan S <swami.iyer@ti.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Acked-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoUSB: musb: MAINTAINERS: Fix my tree's address
Felipe Balbi [Tue, 15 Dec 2009 09:08:45 +0000]
USB: musb: MAINTAINERS: Fix my tree's address

The tree is now on a new address.

Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoUSB: musb: fix compiling warning with min() macro
Cliff Cai [Tue, 15 Dec 2009 09:08:44 +0000]
USB: musb: fix compiling warning with min() macro

Current musb gadget dma code produces the warning:
drivers/usb/musb/musb_gadget.c: In function 'txstate':
drivers/usb/musb/musb_gadget.c:312: warning: comparison of distinct
                                             pointer types lacks a cast

So switch to min_t(size_t, ...).

Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoUSB: musb: move musb_remove to __exit
Felipe Balbi [Tue, 15 Dec 2009 09:08:41 +0000]
USB: musb: move musb_remove to __exit

probe() already was on __init, so moving remove() to __exit.

Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoUSB: musb_gadget: fix kernel oops in txstate()
Sergei Shtylyov [Wed, 16 Dec 2009 17:38:31 +0000]
USB: musb_gadget: fix kernel oops in txstate()

Commit 7723de7e19b744144975a09c81777ec0f14ac5b3 (USB: musb_gadget: remove
pointless loop) included uncalled for (and incorrect) optimization that
might cause a kernel oops in txstate() -- undo it.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoUSB: ftdi_sio: sort PID/VID entries in new ftdi_sio_ids.h header
Andreas Mohr [Thu, 17 Dec 2009 10:56:09 +0000]
USB: ftdi_sio: sort PID/VID entries in new ftdi_sio_ids.h header

This is a (almost) sort-only patch to sort FTDI device
product ID definitions in new ftdi_sio_ids.h header.

Advantage is that new device ID submissions will now have a specific (sorted)
position - less future merge conflicts.

Compile-tested, based on _current_ mainline git.
Minor checkpatch.pl warnings were eliminated whereever it made sense,
very minor text changes.

Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoUSB: ftdi_sio: isolate all device IDs to new ftdi_sio_ids.h header
Andreas Mohr [Wed, 16 Dec 2009 20:45:10 +0000]
USB: ftdi_sio: isolate all device IDs to new ftdi_sio_ids.h header

This is a strictly move-only patch to relocate all FTDI device
product ID definitions to their own ftdi_sio_ids.h header
(following the usual *_ids.h kernel tree convention, too),
thus correcting the slightly too messy appearance
(crucial driver defines were stuck somewhere in the decaying middle swamp
of the huge existing header).

Compile-tested, based on latest mainline git.

Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoUSB core: fix recent kernel-doc warnings
Randy Dunlap [Sun, 13 Dec 2009 18:17:16 +0000]
USB core: fix recent kernel-doc warnings

Fix new kernel-doc warnings in usb core:

Warning(drivers/usb/core/usb.c:79): No description found for parameter 'config'
Warning(drivers/usb/core/usb.c:79): No description found for parameter 'iface_num'
Warning(drivers/usb/core/usb.c:79): No description found for parameter 'alt_num'
Warning(drivers/usb/core/hcd.c:1622): No description found for parameter 'udev'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoUSB: add device ID for Apple Cinema Display 23in 2007
pancho horrillo [Wed, 2 Dec 2009 19:19:42 +0000]
USB: add device ID for Apple Cinema Display 23in 2007

Hi!

$ lsusb -v
Bus 001 Device 008: ID 05ac:921c Apple, Inc.
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0         8
  idVendor           0x05ac Apple, Inc.
  idProduct          0x921c
  bcdDevice            1.15
  iManufacturer           1
  iProduct                2
  iSerial                 0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           34
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                2mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         3 Human Interface Device
      bInterfaceSubClass      0 No Subclass
      bInterfaceProtocol      0 None
      iInterface              0
        HID Device Descriptor:
          bLength                 9
          bDescriptorType        33
          bcdHID               1.11
          bCountryCode            0 Not supported
          bNumDescriptors         1
          bDescriptorType        34 Report
          wDescriptorLength      92
         Report Descriptors:
           ** UNAVAILABLE **
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0008  1x 8 bytes
        bInterval              16

Signed-off-by: pancho horrillo <pancho@pancho.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoUSB: fix section mismatch in early ehci dbgp
Jan Beulich [Fri, 20 Nov 2009 13:50:53 +0000]
USB: fix section mismatch in early ehci dbgp

Commit 917778267fbe67703ab7d5c6f0b7a05d4c3df485 removed __init from
ehci_wait_for_port(), but left it in place on ehci_reset_port(), which
is being called from the former function.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Acked-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoUSB: emi62: fix crash when trying to load EMI 6|2 firmware
Clemens Ladisch [Mon, 21 Dec 2009 23:36:44 +0000]
USB: emi62: fix crash when trying to load EMI 6|2 firmware

While converting emi62 to use request_firmware(), the driver was also
changed to use the ihex helper functions.  However, this broke the loading
of the FPGA firmware because the code tries to access the addr field of
the EOF record which works with a plain array that has an empty last
record but not with the ihex helper functions where the end of the data is
signaled with a NULL record pointer, resulting in:

BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<f80d248c>] emi62_load_firmware+0x33c/0x740 [emi62]

This can be fixed by changing the loop condition to test the return value
of ihex_next_binrec() directly (like in emi26.c).

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Reported-and-tested-by: Der Mickster <retroeffective@gmail.com>
Acked-by: David Woodhouse <David.Woodhouse@intel.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoUSB: serial: Extra device/vendor ID for mos7840 driver
Blaise Gassend [Fri, 18 Dec 2009 23:23:38 +0000]
USB: serial: Extra device/vendor ID for mos7840 driver

Signed-off-by: Blaise Gassend <blaise.gasend_linux@m4x.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoUSB: Fix double-linking of drivers/usb/otg when ULPI is selected
Bill Gatliff [Fri, 18 Dec 2009 15:57:22 +0000]
USB: Fix double-linking of drivers/usb/otg when ULPI is selected

This patch corrects a problem where drivers/usb/otg is linked twice
if CONFIG_USB_ULPI is selected, resulting in a build error (symbol
conflict). The files in that directory are properly linked already
as part of CONFIG_USB, and need not be indicated specifically for
CONFIG_USB_ULPI.

Signed-off-by: Bill Gatliff <bgat@billgatliff.com>
Acked-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoUSB: gadget: Use ERR_PTR/IS_ERR
Julia Lawall [Wed, 9 Dec 2009 13:23:32 +0000]
USB: gadget: Use ERR_PTR/IS_ERR

Use ERR_PTR and IS_ERR rather than mixing integers and pointers.

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression *E;
@@

* E < 0
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoUSB: fix bugs in usb_(de)authorize_device
Alan Stern [Tue, 8 Dec 2009 20:54:44 +0000]
USB: fix bugs in usb_(de)authorize_device

This patch (as1315) fixes some bugs in the USB core authorization
code:

usb_deauthorize_device() should deallocate the device strings
instead of leaking them, and it should invoke
usb_destroy_configuration() (which does proper reference
counting) instead of freeing the config information directly.

usb_authorize_device() shouldn't change the device strings
until it knows that the authorization will succeed, and it should
autosuspend the device at the end (having autoresumed the
device at the start).

Because the device strings can be changed, the sysfs routines
to display the strings must protect the string pointers by
locking the device.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: Inaky Perez-Gonzalez <inaky@linux.intel.com>
Acked-by: David Vrabel <david.vrabel@csr.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoUSB: rename usb_configure_device
Alan Stern [Tue, 8 Dec 2009 20:50:41 +0000]
USB: rename usb_configure_device

This patch (as1314) renames usb_configure_device() and
usb_configure_device_otg() in the hub driver.  Neither name is
appropriate because these routines enumerate devices, they don't
configure them.  That's handled by usb_choose_configuration() and
usb_set_configuration().

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoUSB: power management documentation update
Alan Stern [Tue, 8 Dec 2009 20:49:48 +0000]
USB: power management documentation update

This patch (as1313) updates the documentation concerning USB power
management.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoStaging/vt66*: kconfig, depends on WLAN
Randy Dunlap [Mon, 14 Dec 2009 16:44:46 +0000]
Staging/vt66*: kconfig, depends on WLAN

The vt665[56] drivers can be built when CONFIG_NET=n &
CONFIG_NETDEVICES=n or just when CONFIG_WLAN=n.
This leads to build failures.
Prevent this by making them depend on WLAN.

[This patch was lost in a dualing trees merge;
still needs to be re-applied.]

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoStaging: batman-adv: introduce missing kfree
Julia Lawall [Sun, 13 Dec 2009 13:11:39 +0000]
Staging: batman-adv: introduce missing kfree

Error handling code following a kzalloc should free the allocated data.
Similarly for usb-alloc urb.

The semantic match that finds the first problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@r exists@
local idexpression x;
statement S;
expression E;
identifier f,f1,l;
position p1,p2;
expression *ptr != NULL;
@@

x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...);
...
if (x == NULL) S
<... when != x
     when != if (...) { <+...x...+> }
(
x->f1 = E
|
 (x->f1 == NULL || ...)
|
 f(...,x->f1,...)
)
...>
(
 return \(0\|<+...x...+>\|ptr\);
|
 return@p2 ...;
)

@script:python@
p1 << r.p1;
p2 << r.p2;
@@

print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Cc: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoStaging: batman-adv: Add Kconfig dependancies on PROC_FS and PACKET.
Andrew Lunn [Sat, 12 Dec 2009 22:39:47 +0000]
Staging: batman-adv: Add Kconfig dependancies on PROC_FS and PACKET.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoStaging: panel: Adjust range for PANEL_KEYPAD in Kconfig
Peter Huewe [Tue, 15 Dec 2009 05:37:36 +0000]
Staging: panel: Adjust range for PANEL_KEYPAD in Kconfig

In panel.c there are only the values 0-3 defined. So 4 is invalid:

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoStaging: panel: Fix compilation error with custom lcd charset
Peter Huewe [Tue, 15 Dec 2009 05:21:45 +0000]
Staging: panel: Fix compilation error with custom lcd charset

When compiling panel.c with a DEFAULT_LCD_CHARSET it fails to compile
with the following error message:
drivers/staging/panel/panel.c: In function >>lcd_init<<:
drivers/staging/panel/panel.c:1396: error: expected expression before
>>;<< token
drivers/staging/panel/panel.c:1475: error: expected expression before
>>;<< token
make[3]: *** [drivers/staging/panel/panel.o] error 1
make[2]: *** [drivers/staging/panel] error 2
make[1]: *** [drivers/staging] error 2

The config used was:
CONFIG_PANEL=m
CONFIG_PANEL_PARPORT=0
CONFIG_PANEL_PROFILE=0
CONFIG_PANEL_KEYPAD=0
CONFIG_PANEL_LCD=1
CONFIG_PANEL_LCD_HEIGHT=2
CONFIG_PANEL_LCD_WIDTH=20
CONFIG_PANEL_LCD_BWIDTH=40
CONFIG_PANEL_LCD_HWIDTH=64
CONFIG_PANEL_LCD_CHARSET=0
CONFIG_PANEL_LCD_PROTO=0
CONFIG_PANEL_LCD_PIN_E=14
CONFIG_PANEL_LCD_PIN_RS=17
CONFIG_PANEL_LCD_PIN_RW=16
CONFIG_PANEL_LCD_PIN_BL=0

This patch fixes both errors, as it fixes the define
Patch against current linux-next tree at Tue Dec 15 06:07:01 2009 +0100

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Acked-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoStaging: ramzswap: remove ARM specific d-cache hack
Nitin Gupta [Sat, 12 Dec 2009 06:14:46 +0000]
Staging: ramzswap: remove ARM specific d-cache hack

Remove d-cache hack in ramzswap driver that was needed
to workaround a bug in ARM version of update_mmu_cache()
which caused stale data in d-cache to be transferred to
userspace. This bug was fixed by git commit:
787b2faadc4356b6c2c71feb42fb944fece9a12f
This also brings down one entry in TODO file.

Signed-off-by: Nitin Gupta <ngupta@vflare.org>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoStaging: rtl8192x: fix printk formats
Randy Dunlap [Tue, 24 Nov 2009 20:13:55 +0000]
Staging: rtl8192x: fix printk formats

Fix printk format warnings in rtl8192[eu]:

drivers/staging/rtl8192e/ieee80211/ieee80211_wx.c:979: warning: format '%d' expects type 'int', but argument 2 has type 'size_t'
drivers/staging/rtl8192e/ieee80211/rtl819x_BAProc.c:385: warning: format '%d' expects type 'int', but argument 3 has type 'long unsigned int'
drivers/staging/rtl8192e/ieee80211/rtl819x_BAProc.c:484: warning: format '%d' expects type 'int', but argument 3 has type 'long unsigned int'
drivers/staging/rtl8192e/ieee80211/rtl819x_BAProc.c:614: warning: format '%d' expects type 'int', but argument 3 has type 'long unsigned int'
drivers/staging/rtl8192u/ieee80211/ieee80211_wx.c:848: warning: format '%d' expects type 'int', but argument 2 has type 'size_t'
drivers/staging/rtl8192u/ieee80211/rtl819x_BAProc.c:343: warning: format '%d' expects type 'int', but argument 3 has type 'long unsigned int'
drivers/staging/rtl8192u/ieee80211/rtl819x_BAProc.c:442: warning: format '%d' expects type 'int', but argument 3 has type 'long unsigned int'
drivers/staging/rtl8192u/ieee80211/rtl819x_BAProc.c:572: warning: format '%d' expects type 'int', but argument 3 has type 'long unsigned int'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>