9 years agonetdev: usb: dm9601.c can drive a device not supported yet, add support for it
Janusz Krzysztofik [Wed, 28 Oct 2009 05:34:21 +0000]
netdev: usb: dm9601.c can drive a device not supported yet, add support for it

I found that the current version of drivers/net/usb/dm9601.c can be used to
successfully drive a low-power, low-cost network adapter with USB ID
0a46:9000, based on a DM9000E chipset. As no device with this ID is yet
present in the kernel, I have created a patch that adds support for the device
to the dm9601 driver.

Created and tested against linux-2.6.32-rc5.

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoqlge: Fix firmware mailbox command timeout.
Ron Mercer [Wed, 28 Oct 2009 08:39:21 +0000]
qlge: Fix firmware mailbox command timeout.

The mailbox command process would only process a maximum of 5 unrelated
firmware events while waiting for it's command completion status.
It should process an unlimited number of events while waiting for a maximum of 5 seconds.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoqlge: Fix EEH handling.
Ron Mercer [Wed, 28 Oct 2009 08:39:20 +0000]
qlge: Fix EEH handling.

Clean up driver resources without touch the hardware. Add pci
save/restore state.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoAF_RAW: Augment raw_send_hdrinc to expand skb to fit iphdr->ihl (v2)
Neil Horman [Wed, 28 Oct 2009 08:59:47 +0000]
AF_RAW: Augment raw_send_hdrinc to expand skb to fit iphdr->ihl (v2)

Augment raw_send_hdrinc to correct for incorrect ip header length values

A series of oopses was reported to me recently.  Apparently when using AF_RAW
sockets to send data to peers that were reachable via ipsec encapsulation,
people could panic or BUG halt their systems.

I've tracked the problem down to user space sending an invalid ip header over an
AF_RAW socket with IP_HDRINCL set to 1.

Basically what happens is that userspace sends down an ip frame that includes
only the header (no data), but sets the ip header ihl value to a large number,
one that is larger than the total amount of data passed to the sendmsg call.  In
raw_send_hdrincl, we allocate an skb based on the size of the data in the msghdr
that was passed in, but assume the data is all valid.  Later during ipsec
encapsulation, xfrm4_tranport_output moves the entire frame back in the skbuff
to provide headroom for the ipsec headers.  During this operation, the
skb->transport_header is repointed to a spot computed by
skb->network_header + the ip header length (ihl).  Since so little data was
passed in relative to the value of ihl provided by the raw socket, we point
transport header to an unknown location, resulting in various crashes.

This fix for this is pretty straightforward, simply validate the value of of
iph->ihl when sending over a raw socket.  If (iph->ihl*4U) > user data buffer
size, drop the frame and return -EINVAL.  I just confirmed this fixes the
reported crashes.

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirel...
David S. Miller [Thu, 29 Oct 2009 08:05:38 +0000]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless-2.6

9 years agobonding: fix a race condition in calls to slave MII ioctls
Jiri Bohac [Thu, 29 Oct 2009 05:23:54 +0000]
bonding: fix a race condition in calls to slave MII ioctls

In mii monitor mode, bond_check_dev_link() calls the the ioctl
handler of slave devices. It stores the ndo_do_ioctl function
pointer to a static (!) ioctl variable and later uses it to call the
handler with the IOCTL macro.

If another thread executes bond_check_dev_link() at the same time
(even with a different bond, which none of the locks prevent), a
race condition occurs. If the two racing slaves have different
drivers, this may result in one driver's ioctl handler being
called with a pointer to a net_device controlled with a different
driver, resulting in unpredictable breakage.

Unless I am overlooking something, the "static" must be a
copy'n'paste error (?).

Signed-off-by: Jiri Bohac <jbohac@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agovirtio-net: fix data corruption with OOM
Michael S. Tsirkin [Wed, 28 Oct 2009 11:03:38 +0000]
virtio-net: fix data corruption with OOM

virtio net used to unlink skbs from send queues on error,
but ever since 48925e372f04f5e35fec6269127c62b2c71ab794
we do not do this. This causes guest data corruption and crashes
with vhost since net core can requeue the skb or free it without
it being taken off the list.

This patch fixes this by queueing the skb after successful
transmit.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agosfc: Set ip_summed correctly for page buffers passed to GRO
Ben Hutchings [Wed, 28 Oct 2009 10:43:49 +0000]
sfc: Set ip_summed correctly for page buffers passed to GRO

Page buffers containing packets with an incorrect checksum or using a
protocol not handled by hardware checksum offload were previously not
passed to LRO.  The conversion to GRO changed this, but did not set
the ip_summed value accordingly.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agocnic: Fix L2CTX_STATUSB_NUM offset in context memory.
Michael Chan [Wed, 28 Oct 2009 10:41:59 +0000]
cnic: Fix L2CTX_STATUSB_NUM offset in context memory.

The BNX2_L2CTX_STATUSB_NUM definition needs to be changed to match
the recent firmware update:

commit 078b0735881c7969aaf21469f3577831cddd9f8c
bnx2: Update firmware to 5.0.0.j3.

Without the fix, bnx2 can crash intermittently in bnx2_rx_int() when
iSCSI is enabled.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoMAINTAINERS: rt2x00 list is moderated
Bartlomiej Zolnierkiewicz [Mon, 26 Oct 2009 19:14:33 +0000]
MAINTAINERS: rt2x00 list is moderated

Cc: users@rt2x00.serialmonkey.com
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

9 years agoairo: Reorder tests, check bounds before element
Roel Kluin [Mon, 26 Oct 2009 14:28:11 +0000]
airo: Reorder tests, check bounds before element

Test whether index is within bounds before reading the element

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

9 years agomac80211: fix for incorrect sequence number on hostapd injected frames
Björn Smedman [Sat, 24 Oct 2009 18:55:09 +0000]
mac80211: fix for incorrect sequence number on hostapd injected frames

When hostapd injects a frame, e.g. an authentication or association
response, mac80211 looks for a suitable access point virtual interface
to associate the frame with based on its source address. This makes it
possible e.g. to correctly assign sequence numbers to the frames.

A small typo in the ethernet address comparison statement caused a
failure to find a suitable ap interface. Sequence numbers on such
frames where therefore left unassigned causing some clients
(especially windows-based 11b/g clients) to reject them and fail to
authenticate or associate with the access point. This patch fixes the
typo in the address comparison statement.

Signed-off-by: Björn Smedman <bjorn.smedman@venatech.se>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Cc: stable@kernel.org
Signed-off-by: John W. Linville <linville@tuxdriver.com>

9 years agolibertas spi: fix sparse errors
Holger Schurig [Thu, 22 Oct 2009 13:30:44 +0000]
libertas spi: fix sparse errors

This fixes the following sparse warnings:

$ make modules SUBDIRS=drivers/net/wireless/libertas C=1 CF=-D__CHECK_ENDIAN__
make: Entering directory `/usr/src/linux-wl'
  CHECK   drivers/net/wireless/libertas/if_spi.c
drivers/net/wireless/libertas/if_spi.c:137:16: warning: incorrect type in initializer (different base types)
drivers/net/wireless/libertas/if_spi.c:137:16:    expected unsigned short [unsigned] [usertype] reg_out
drivers/net/wireless/libertas/if_spi.c:137:16:    got restricted __le16 [usertype] <noident>
drivers/net/wireless/libertas/if_spi.c:191:16: warning: incorrect type in initializer (different base types)
drivers/net/wireless/libertas/if_spi.c:191:16:    expected unsigned short [unsigned] [usertype] reg_out
drivers/net/wireless/libertas/if_spi.c:191:16:    got restricted __le16 [usertype] <noident>
drivers/net/wireless/libertas/if_spi.c:256:24: warning: incorrect type in argument 1 (different base types)
drivers/net/wireless/libertas/if_spi.c:256:24:    expected restricted __le32 const [usertype] *p
drivers/net/wireless/libertas/if_spi.c:256:24:    got unsigned int *<noident>
drivers/net/wireless/libertas/if_spi.c:243:24: warning: incorrect type in argument 1 (different base types)
drivers/net/wireless/libertas/if_spi.c:243:24:    expected restricted __le16 const [usertype] *p
drivers/net/wireless/libertas/if_spi.c:243:24:    got unsigned short *<noident>
drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types)
drivers/net/wireless/libertas/if_spi.c:171:7:    expected unsigned short [unsigned] [usertype] buff
drivers/net/wireless/libertas/if_spi.c:171:7:    got restricted __le16 [usertype] <noident>
drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types)
drivers/net/wireless/libertas/if_spi.c:171:7:    expected unsigned short [unsigned] [usertype] buff
drivers/net/wireless/libertas/if_spi.c:171:7:    got restricted __le16 [usertype] <noident>
drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types)
drivers/net/wireless/libertas/if_spi.c:171:7:    expected unsigned short [unsigned] [usertype] buff
drivers/net/wireless/libertas/if_spi.c:171:7:    got restricted __le16 [usertype] <noident>
drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types)
drivers/net/wireless/libertas/if_spi.c:171:7:    expected unsigned short [unsigned] [usertype] buff
drivers/net/wireless/libertas/if_spi.c:171:7:    got restricted __le16 [usertype] <noident>
drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types)
drivers/net/wireless/libertas/if_spi.c:171:7:    expected unsigned short [unsigned] [usertype] buff
drivers/net/wireless/libertas/if_spi.c:171:7:    got restricted __le16 [usertype] <noident>
drivers/net/wireless/libertas/if_spi.c:243:24: warning: incorrect type in argument 1 (different base types)
drivers/net/wireless/libertas/if_spi.c:243:24:    expected restricted __le16 const [usertype] *p
drivers/net/wireless/libertas/if_spi.c:243:24:    got unsigned short *<noident>
drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types)
drivers/net/wireless/libertas/if_spi.c:171:7:    expected unsigned short [unsigned] [usertype] buff
drivers/net/wireless/libertas/if_spi.c:171:7:    got restricted __le16 [usertype] <noident>
drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types)
drivers/net/wireless/libertas/if_spi.c:171:7:    expected unsigned short [unsigned] [usertype] buff
drivers/net/wireless/libertas/if_spi.c:171:7:    got restricted __le16 [usertype] <noident>
drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types)
drivers/net/wireless/libertas/if_spi.c:171:7:    expected unsigned short [unsigned] [usertype] buff
drivers/net/wireless/libertas/if_spi.c:171:7:    got restricted __le16 [usertype] <noident>
drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types)
drivers/net/wireless/libertas/if_spi.c:171:7:    expected unsigned short [unsigned] [usertype] buff
drivers/net/wireless/libertas/if_spi.c:171:7:    got restricted __le16 [usertype] <noident>
drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types)
drivers/net/wireless/libertas/if_spi.c:171:7:    expected unsigned short [unsigned] [usertype] buff
drivers/net/wireless/libertas/if_spi.c:171:7:    got restricted __le16 [usertype] <noident>
drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types)
drivers/net/wireless/libertas/if_spi.c:171:7:    expected unsigned short [unsigned] [usertype] buff
drivers/net/wireless/libertas/if_spi.c:171:7:    got restricted __le16 [usertype] <noident>
drivers/net/wireless/libertas/if_spi.c:243:24: warning: incorrect type in argument 1 (different base types)
drivers/net/wireless/libertas/if_spi.c:243:24:    expected restricted __le16 const [usertype] *p
drivers/net/wireless/libertas/if_spi.c:243:24:    got unsigned short *<noident>
drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types)
drivers/net/wireless/libertas/if_spi.c:171:7:    expected unsigned short [unsigned] [usertype] buff
drivers/net/wireless/libertas/if_spi.c:171:7:    got restricted __le16 [usertype] <noident>
drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types)
drivers/net/wireless/libertas/if_spi.c:171:7:    expected unsigned short [unsigned] [usertype] buff
drivers/net/wireless/libertas/if_spi.c:171:7:    got restricted __le16 [usertype] <noident>
drivers/net/wireless/libertas/if_spi.c:243:24: warning: incorrect type in argument 1 (different base types)
drivers/net/wireless/libertas/if_spi.c:243:24:    expected restricted __le16 const [usertype] *p
drivers/net/wireless/libertas/if_spi.c:243:24:    got unsigned short *<noident>
drivers/net/wireless/libertas/if_spi.c:243:24: warning: incorrect type in argument 1 (different base types)
drivers/net/wireless/libertas/if_spi.c:243:24:    expected restricted __le16 const [usertype] *p
drivers/net/wireless/libertas/if_spi.c:243:24:    got unsigned short *<noident>
drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types)
drivers/net/wireless/libertas/if_spi.c:171:7:    expected unsigned short [unsigned] [usertype] buff
drivers/net/wireless/libertas/if_spi.c:171:7:    got restricted __le16 [usertype] <noident>
drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types)
drivers/net/wireless/libertas/if_spi.c:171:7:    expected unsigned short [unsigned] [usertype] buff
drivers/net/wireless/libertas/if_spi.c:171:7:    got restricted __le16 [usertype] <noident>
drivers/net/wireless/libertas/if_spi.c:243:24: warning: incorrect type in argument 1 (different base types)
drivers/net/wireless/libertas/if_spi.c:243:24:    expected restricted __le16 const [usertype] *p
drivers/net/wireless/libertas/if_spi.c:243:24:    got unsigned short *<noident>

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

9 years agomac80211: trivial: fix spelling in mesh_hwmp
Andrey Yurovsky [Tue, 20 Oct 2009 19:17:34 +0000]
mac80211: trivial: fix spelling in mesh_hwmp

Fix a typo in the description of hwmp_route_info_get(), no function
changes.

Signed-off-by: Andrey Yurovsky <andrey@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

9 years agocfg80211: sme: deauthenticate on assoc failure
Johannes Berg [Tue, 20 Oct 2009 06:08:53 +0000]
cfg80211: sme: deauthenticate on assoc failure

When the in-kernel SME gets an association failure from
the AP we don't deauthenticate, and thus get into a very
confused state which will lead to warnings later on. Fix
this by actually deauthenticating when the AP indicates
an association failure.

(Brought to you by the hacking session at Kernel Summit 2009 in Tokyo,
Japan. -- JWL)

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

9 years agomac80211: keep auth state when assoc fails
Johannes Berg [Tue, 20 Oct 2009 06:08:12 +0000]
mac80211: keep auth state when assoc fails

When association fails, we should stay authenticated,
which in mac80211 is represented by the existence of
the mlme work struct, so we cannot free that, instead
we need to just set it to idle.

(Brought to you by the hacking session at Kernel Summit 2009 in Tokyo,
Japan. -- JWL)

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

9 years agomac80211: fix ibss joining
Reinette Chatre [Mon, 19 Oct 2009 21:55:37 +0000]
mac80211: fix ibss joining

Recent commit "mac80211: fix logic error ibss merge bssid check" fixed
joining of ibss cell when static bssid is provided. In this case
ifibss->bssid is set before the cell is joined and comparing that address
to a bss should thus always succeed. Unfortunately this change broke the
other case of joining a ibss cell without providing a static bssid where
the value of ifibss->bssid is not set before the cell is joined.

Since ifibss->bssid may be set before or after joining the cell we do not
learn anything by comparing it to a known bss. Remove this check.

Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

9 years agob43: add 'struct b43_wl' missing declaration
Miguel Boton [Fri, 9 Oct 2009 14:13:53 +0000]
b43: add 'struct b43_wl' missing declaration

'struct b43_wl' declaration is missing at 'leds.h'.
It should be declared to avoid getting some GCC warnings at 'b43_leds_unregister'.

Signed-off-by: Miguel Botón <mboton@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

9 years agob43: Fix Bugzilla #14181 and the bug from the previous 'fix'
Larry Finger [Fri, 16 Oct 2009 15:18:09 +0000]
b43: Fix Bugzilla #14181 and the bug from the previous 'fix'

"b43: Fix PPC crash in rfkill polling on unload" fixed the bug reported
in Bugzilla No. 14181; however, it introduced a new bug. Whenever the
radio switch was turned off, it was necessary to unload and reload
the driver for it to recognize the switch again.

This patch fixes both the original bug in #14181 and the bug introduced by
the previous patch. It must be stated, however, that if there is a BCM4306/3
with an rfkill switch (not yet proven), then the driver will need an
unload/reload cycle to turn the device back on.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

9 years agort2x00: Fix crypto in TX frame for rt2800usb
Benoit PAPILLAULT [Thu, 15 Oct 2009 19:17:09 +0000]
rt2x00: Fix crypto in TX frame for rt2800usb

Signed-off-by: Benoit PAPILLAULT <benoit.papillault@free.fr>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

9 years agosh_eth: Add asm/cacheflush.h
Nobuhiro Iwamatsu [Mon, 26 Oct 2009 13:49:50 +0000]
sh_eth: Add asm/cacheflush.h

Add include asm/cacheflush.h,  because declaration of __flush_purge_region
moved to asm/cacheflush.h.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoPPPoE: Fix flush/close races.
Michal Ostrowski [Mon, 26 Oct 2009 23:23:20 +0000]
PPPoE: Fix flush/close races.

Be more careful about the state of pointers during tear-down.
The "pppoe_dev" field can only be looked at safely while holding socket locks.
This subsequently allows for the flush_lock to be killed.

We depend on the PPPOX_CONNECTED state to tell us that that those fields are
valid, so whoever clears that state (pppox_unbind_sock()) is responsible for
the dev_put() call.

We also have to ensure that we delete_item() on all sockets before they are
cleaned up.

The need for these changes has been exposed by scenarios wherein namespace
bindings of ethernet devices change while there are ongoing PPPoE sessions,
which resulted in oopses due to unusual socket connection termination paths,
exposing these issues.

Signed-off-by: Michal Ostrowski <mostrows@gmail.com>
Reviewed-by: Cyril Gorcunov <gorcunov@gmail.com>
Reported-by: Denys Fedoryschenko <denys@visp.net.lb>
Tested-by: Denys Fedoryschenko <denys@visp.net.lb>

9 years agoe1000e: allow for swflag to be held over consecutive PHY accesses
Bruce Allan [Mon, 26 Oct 2009 11:24:02 +0000]
e1000e: allow for swflag to be held over consecutive PHY accesses

PCH-based parts (82577/82578) and some ICH8-based parts (82566) need to
hold the swflag (sw/fw/hw hardware semaphore) over consecutive PHY accesses
in order to perform sw-driven PHY configuration during initialization to
workaround known hardware issues (see follow-on patch).  This patch
provides new PHY read/write functions (and function pointers) that will
allow accessing the PHY registers assuming the swflag has already been
acquired.  The actual PHY register access code has moved into helper
functions that are called with a flag indicating whether or not the swflag
has already been acquired and acquires/releases it if not.

The functions called from within the updated PHY access functions had to be
updated to assume the swflag was already acquired, and other functions that
called those functions were also updated to acquire/release the swflag.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoe1000e: separate mutex usage between NVM and PHY/CSR register for ICHx/PCH
Bruce Allan [Mon, 26 Oct 2009 11:23:43 +0000]
e1000e: separate mutex usage between NVM and PHY/CSR register for ICHx/PCH

Accesses to NVM and PHY/CSR registers on ICHx/PCH-based parts are protected
from concurrent accesses with a mutex that is acquired when the access is
initiated and released when the access has completed.  However, the two
types of accesses should not be protected by the same mutex because the
driver may have to access the NVM while already holding the mutex over
several consecutive PHY/CSR accesses which would result in livelock.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoe1000e: 82577/82578 requires a different method to configure LPLU
Bruce Allan [Mon, 26 Oct 2009 11:23:25 +0000]
e1000e: 82577/82578 requires a different method to configure LPLU

Unlike previous ICHx-based parts, the PCH-based parts (82577/82578) require
LPLU (Low Power Link Up, or "reverse auto-negotiation") to be configured in
the PHY rather than the MAC.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoe1000e: increase swflag acquisition timeout for ICHx/PCH
Bruce Allan [Mon, 26 Oct 2009 11:23:06 +0000]
e1000e: increase swflag acquisition timeout for ICHx/PCH

In some conditions (e.g. when AMT is enabled on the system), it is possible
to take an extended period of time to for the driver to acquire the sw/fw/hw
hardware semaphore used to protect against concurrent access of a shared
resource (e.g. PHY registers).  This could cause PHY registers to not get
configured properly resulting in link issues.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoe1000e: clear PHY wakeup bit after LCD reset on 82577/82578
Bruce Allan [Mon, 26 Oct 2009 11:22:47 +0000]
e1000e: clear PHY wakeup bit after LCD reset on 82577/82578

Performing a dummy read of the PHY Wakeup Control (WUC) register clears the
wakeup enable bit set by an PHY reset.  If this bit remains set, link
problems may occur.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoigbvf: fix memory leak when ring size changed while interface down
Alexander Duyck [Mon, 26 Oct 2009 11:32:25 +0000]
igbvf: fix memory leak when ring size changed while interface down

This patch resolves a memory leak which occurs while changing the ring size
while the interface is down.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoixgbe: fix memory leak when resizing rings while interface is down
Alexander Duyck [Mon, 26 Oct 2009 11:32:05 +0000]
ixgbe: fix memory leak when resizing rings while interface is down

This patch resolves a memory leak that occurs when you resize the rings via
the ethtool -G option while the interface is down.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoigb: fix memory leak when setting ring size while interface is down
Alexander Duyck [Mon, 26 Oct 2009 11:31:47 +0000]
igb: fix memory leak when setting ring size while interface is down

Changing ring sizes while the interface was down was causing a double
allocation of the receive and transmit rings.  This issue is amplified when
there are multiple rings enabled.  To prevent this we need to add an
additional check which will just update the ring counts when the interface
is not up and skip the allocation steps.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agobonding: Modify hash transmit policies to use the packet's source MAC address
Jasper Spaans [Fri, 23 Oct 2009 04:08:46 +0000]
bonding: Modify hash transmit policies to use the packet's source MAC address

Modify bonding hash transmit policies to use the psource MAC address of
the packet instead of the MAC address configured for the bonding device.

The old sitation conflicts with the documentation.

Signed-off-by: Jasper Spaans <spaans@fox-it.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agopktgen: Dont leak kernel memory
Eric Dumazet [Sat, 24 Oct 2009 13:55:20 +0000]
pktgen: Dont leak kernel memory

While playing with pktgen, I realized IP ID was not filled and a
random value was taken, possibly leaking 2 bytes of kernel memory.

We can use an increasing ID, this can help diagnostics anyway.

Also clear packet payload, instead of leaking kernel memory.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoDM9000: Fix revision ID for DM9000B
Ben Dooks [Sat, 24 Oct 2009 13:53:07 +0000]
DM9000: Fix revision ID for DM9000B

The DM9000B revision ID is 0x1A, not 0x1B as set in the curernt
dm9000.h header.

Fix bug reported by Paolo Zebelloni.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Simtec Linux Team <linux@simtec.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agor8169: fix Ethernet Hangup for RTL8110SC rev d
Simon Wunderlich [Sat, 24 Oct 2009 13:47:33 +0000]
r8169: fix Ethernet Hangup for RTL8110SC rev d

The 8110SC rev d chip on our board shows a regression which the 8110SB chip
did not have. When inbound traffic is overflowing the receive descriptor queue,
"holes" in the ring buffer may occur which lead to a hangup until the buffer
is filled again. The packets are than completely processed, but the ring
remains porous and no packets are processed until the next overflow. Setting
the interface down and up can fix the problem temporary from userspace.

For some reason we don't know, this behaviour is not occuring if the RxVlan
bit for hardware VLAN untagging is set. There is another "Work around for
AMD plateform" in the current code which checks the VLAN status
word in receive descriptors, but does never come to effect when hardware
VLAN support is enabled. We assume that this is a bug in the chip.

The following patch fixes the problem. Without the patch we could reproduce
the hang within minutes (given other devices also generating lots of
interrupts), without we couldn't reproduce within a few days of long term
testing.

This version contains minor style adjustments and is sent with mutt which
will hopefully not destroy the formatting again.

Signed-off-by: Bernhard Schmidt <bernhard.schmidt@saxnet.de>
Signed-off-by: Simon Wunderlich <simon.wunderlich@saxnet.de>
Acked-by: Francois Romieu <romieu@zoreil.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoifb: should not use __dev_get_by_index() without locks
Eric Dumazet [Tue, 20 Oct 2009 02:35:50 +0000]
ifb: should not use __dev_get_by_index() without locks

At this point (ri_tasklet()), RTNL or dev_base_lock are not held,
we must use dev_get_by_index() instead of __dev_get_by_index()

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agonet: au1000_eth: add missing capability.h
Manuel Lauss [Sat, 17 Oct 2009 02:00:07 +0000]
net: au1000_eth: add missing capability.h

fixes the following build failure:
CC drivers/net/au1000_eth.o
/drivers/net/au1000_eth.c: In function 'au1000_set_settings':
/drivers/net/au1000_eth.c:623: error: implicit declaration of function 'capable'
/drivers/net/au1000_eth.c:623: error: 'CAP_NET_ADMIN' undeclared (first use in this function)
/drivers/net/au1000_eth.c:623: error: (Each undeclared identifier is reported only once
/drivers/net/au1000_eth.c:623: error: for each function it appears in.

Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agomyri10ge: improve port type reporting in ethtool
Brice Goglin [Fri, 23 Oct 2009 04:43:43 +0000]
myri10ge: improve port type reporting in ethtool

Improve the reporting of myri10ge port type in ethtool,
and update for new boards.

Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Andrew Gallatin <gallatin@myri.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agonet: use WARN() for the WARN_ON in commit b6b39e8f3fbbb
Arjan van de Ven [Fri, 23 Oct 2009 04:37:56 +0000]
net: use WARN() for the WARN_ON in commit b6b39e8f3fbbb

Commit b6b39e8f3fbbb (tcp: Try to catch MSG_PEEK bug) added a printk()
to the WARN_ON() that's in tcp.c. This patch changes this combination
to WARN(); the advantage of WARN() is that the printk message shows up
inside the message, so that kerneloops.org will collect the message.

In addition, this gets rid of an extra if() statement.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoe1000e: reset the PHY on 82577/82578 when going to Sx
Bruce Allan [Fri, 23 Oct 2009 04:22:18 +0000]
e1000e: reset the PHY on 82577/82578 when going to Sx

The PHY on 82577/82578 parts needs a soft reset when transitioning to Sx
state in order for the PHY write which disables gigabit speed to take
effect.  Gigabit speed must be disabled in order for the PHY writes to
registers on page 800 (the wakeup control registers) to work as expected
otherwise the system might not wake via WoL.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoisdn: fix possible circular locking dependency
Xiaotian Feng [Wed, 21 Oct 2009 23:07:04 +0000]
isdn: fix possible circular locking dependency

There's a circular locking dependency:

---> isdn_net_get_locked_lp
    --->lock &nd->queue_lock
    --->lock &nd->queue->xmit_lock
    .....................
    ---->unlock &nd->queue_lock

---> isdn_net_writebuf_skb (called with &nd->queue->xmit_lock locked)
    ---->isdn_net_inc_frame_cnt
         ---->isdn_net_device_busy
              ----> lock &nd->queue_lock

This will trigger lockdep warnings:

 =======================================================
 [ INFO: possible circular locking dependency detected ]
 2.6.32-rc4-testing #7
 -------------------------------------------------------
 ipppd/28379 is trying to acquire lock:
 (&netdev->queue_lock){......}, at: [<e62ad0fd>] isdn_net_device_busy+0x2c/0x74 [isdn]

 but task is already holding lock:
 (&netdev->local->xmit_lock){+.....}, at: [<e62aefc2>] isdn_net_write_super+0x3f/0x6e [isdn]

 which lock already depends on the new lock.
 .......

 We don't need to lock nd->queue->xmit_lock to protect single
isdn_net_lp_busy(). This can fix above lockdep warnings.

Reported-and-tested-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: Xiaotian Feng <xtfeng@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agonetxen: avoid undue board config check
Dhananjay Phadke [Wed, 21 Oct 2009 19:39:03 +0000]
netxen: avoid undue board config check

Old code assumed board config version in the flash to be 1.
When this will get changed by tools, driver just refuses to
attach. This is unnecessary since driver does not have to
parse board config structure directly (maintained by firmware).

Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agonetxen: fix tx timeout handling on firmware hang
Amit Kumar Salecha [Wed, 21 Oct 2009 19:39:02 +0000]
netxen: fix tx timeout handling on firmware hang

Clear NX_RESETING bit in netxen_tx_timeout_task() so that
the firmware watchdog task can catch need_reset request
from tx timeout.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agonetxen: fix i2c init
Dhananjay Phadke [Wed, 21 Oct 2009 19:39:01 +0000]
netxen: fix i2c init

Avoid resetting subsys ID in i2c block. Also remove duplicate
check for address tranlsation error.

Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoniu: VLAN_ETH_HLEN should be used to make sure that the whole MAC header was copied...
Joyce Yu [Thu, 22 Oct 2009 00:21:10 +0000]
niu: VLAN_ETH_HLEN should be used to make sure that the whole MAC header was copied to the head buffer in the Vlan packets case

Signed-off-by: Joyce Yu <joyce.yu@sun.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoKS8851: Fix ks8851_set_rx_mode() for IFF_MULTICAST
Ben Dooks [Mon, 19 Oct 2009 23:49:05 +0000]
KS8851: Fix ks8851_set_rx_mode() for IFF_MULTICAST

In ks8851_set_rx_mode() the case handling IFF_MULTICAST was also setting
the RXCR1_AE bit by accident. This meant that all unicast frames where
being accepted by the device. Remove RXCR1_AE from this case.

Note, RXCR1_AE was also masking a problem with setting the MAC address
properly, so needs to be applied after fixing the MAC write order.

Fixes a bug reported by Doong, Ping of Micrel. This version of the
patch avoids setting RXCR1_ME for all cases.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoKS8851: Fix MAC address write order
Ben Dooks [Mon, 19 Oct 2009 23:49:04 +0000]
KS8851: Fix MAC address write order

The MAC address register was being written in the wrong order, so add
a new address macro to convert mac-address byte to register address and
a ks8851_wrreg8() function to write each byte without having to worry
about any difficult byte swapping.

Fixes a bug reported by Doong, Ping of Micrel.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoKS8851: Add soft reset at probe time
Ben Dooks [Mon, 19 Oct 2009 23:49:03 +0000]
KS8851: Add soft reset at probe time

Issue a full soft reset at probe time.

This was reported by Doong Ping of Micrel, but no explanation of why this
is necessary or what bug it is fixing. Add it as it does not seem to hurt
the current driver and ensures that the device is in a known state when we
start setting it up.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agonet: fix section mismatch in fec.c
Steven King [Wed, 21 Oct 2009 01:51:37 +0000]
net: fix section mismatch in fec.c

fec_enet_init is called by both fec_probe and fec_resume, so it
shouldn't be marked as __init.

Signed-off-by: Steven King <sfking@fdwdc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agonet: Fix struct inet_timewait_sock bitfield annotation
Eric Dumazet [Sun, 18 Oct 2009 22:48:51 +0000]
net: Fix struct inet_timewait_sock bitfield annotation

commit 9e337b0f (net: annotate inet_timewait_sock bitfields)
added 4/8 bytes in struct inet_timewait_sock.

Fix this by declaring tw_ipv6_offset in the 'flags' bitfield
The 14 bits hole is named tw_pad to make it cleary apparent.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agotcp: Try to catch MSG_PEEK bug
Herbert Xu [Mon, 19 Oct 2009 19:41:06 +0000]
tcp: Try to catch MSG_PEEK bug

This patch tries to print out more information when we hit the
MSG_PEEK bug in tcp_recvmsg.  It's been around since at least
2005 and it's about time that we finally fix it.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agonet: Fix IP_MULTICAST_IF
Eric Dumazet [Mon, 19 Oct 2009 06:41:58 +0000]
net: Fix IP_MULTICAST_IF

ipv4/ipv6 setsockopt(IP_MULTICAST_IF) have dubious __dev_get_by_index() calls.

This function should be called only with RTNL or dev_base_lock held, or reader
could see a corrupt hash chain and eventually enter an endless loop.

Fix is to call dev_get_by_index()/dev_put().

If this happens to be performance critical, we could define a new dev_exist_by_index()
function to avoid touching dev refcount.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agobluetooth: static lock key fix
Dave Young [Sun, 18 Oct 2009 20:28:30 +0000]
bluetooth: static lock key fix

When shutdown ppp connection, lockdep waring about non-static key
will happen, it is caused by the lock is not initialized properly
at that time.

Fix with tuning the lock/skb_queue_head init order

[   94.339261] INFO: trying to register non-static key.
[   94.342509] the code is fine but needs lockdep annotation.
[   94.342509] turning off the locking correctness validator.
[   94.342509] Pid: 0, comm: swapper Not tainted 2.6.31-mm1 #2
[   94.342509] Call Trace:
[   94.342509]  [<c0248fbe>] register_lock_class+0x58/0x241
[   94.342509]  [<c024b5df>] ? __lock_acquire+0xb57/0xb73
[   94.342509]  [<c024ab34>] __lock_acquire+0xac/0xb73
[   94.342509]  [<c024b7fa>] ? lock_release_non_nested+0x17b/0x1de
[   94.342509]  [<c024b662>] lock_acquire+0x67/0x84
[   94.342509]  [<c04cd1eb>] ? skb_dequeue+0x15/0x41
[   94.342509]  [<c054a857>] _spin_lock_irqsave+0x2f/0x3f
[   94.342509]  [<c04cd1eb>] ? skb_dequeue+0x15/0x41
[   94.342509]  [<c04cd1eb>] skb_dequeue+0x15/0x41
[   94.342509]  [<c054a648>] ? _read_unlock+0x1d/0x20
[   94.342509]  [<c04cd641>] skb_queue_purge+0x14/0x1b
[   94.342509]  [<fab94fdc>] l2cap_recv_frame+0xea1/0x115a [l2cap]
[   94.342509]  [<c024b5df>] ? __lock_acquire+0xb57/0xb73
[   94.342509]  [<c0249c04>] ? mark_lock+0x1e/0x1c7
[   94.342509]  [<f8364963>] ? hci_rx_task+0xd2/0x1bc [bluetooth]
[   94.342509]  [<fab95346>] l2cap_recv_acldata+0xb1/0x1c6 [l2cap]
[   94.342509]  [<f8364997>] hci_rx_task+0x106/0x1bc [bluetooth]
[   94.342509]  [<fab95295>] ? l2cap_recv_acldata+0x0/0x1c6 [l2cap]
[   94.342509]  [<c02302c4>] tasklet_action+0x69/0xc1
[   94.342509]  [<c022fbef>] __do_softirq+0x94/0x11e
[   94.342509]  [<c022fcaf>] do_softirq+0x36/0x5a
[   94.342509]  [<c022fe14>] irq_exit+0x35/0x68
[   94.342509]  [<c0204ced>] do_IRQ+0x72/0x89
[   94.342509]  [<c02038ee>] common_interrupt+0x2e/0x34
[   94.342509]  [<c024007b>] ? pm_qos_add_requirement+0x63/0x9d
[   94.342509]  [<c038e8a5>] ? acpi_idle_enter_bm+0x209/0x238
[   94.342509]  [<c049d238>] cpuidle_idle_call+0x5c/0x94
[   94.342509]  [<c02023f8>] cpu_idle+0x4e/0x6f
[   94.342509]  [<c0534153>] rest_init+0x53/0x55
[   94.342509]  [<c0781894>] start_kernel+0x2f0/0x2f5
[   94.342509]  [<c0781091>] i386_start_kernel+0x91/0x96

Reported-by: Oliver Hartkopp <oliver@hartkopp.net>
Signed-off-by: Dave Young <hidave.darkstar@gmail.com>
Tested-by: Oliver Hartkopp <oliver@hartkopp.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agobluetooth: scheduling while atomic bug fix
Dave Young [Sun, 18 Oct 2009 20:24:41 +0000]
bluetooth: scheduling while atomic bug fix

Due to driver core changes dev_set_drvdata will call kzalloc which should be
in might_sleep context, but hci_conn_add will be called in atomic context

Like dev_set_name move dev_set_drvdata to work queue function.

oops as following:

Oct  2 17:41:59 darkstar kernel: [  438.001341] BUG: sleeping function called from invalid context at mm/slqb.c:1546
Oct  2 17:41:59 darkstar kernel: [  438.001345] in_atomic(): 1, irqs_disabled(): 0, pid: 2133, name: sdptool
Oct  2 17:41:59 darkstar kernel: [  438.001348] 2 locks held by sdptool/2133:
Oct  2 17:41:59 darkstar kernel: [  438.001350]  #0:  (sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+.+.}, at: [<faa1d2f5>] lock_sock+0xa/0xc [l2cap]
Oct  2 17:41:59 darkstar kernel: [  438.001360]  #1:  (&hdev->lock){+.-.+.}, at: [<faa20e16>] l2cap_sock_connect+0x103/0x26b [l2cap]
Oct  2 17:41:59 darkstar kernel: [  438.001371] Pid: 2133, comm: sdptool Not tainted 2.6.31-mm1 #2
Oct  2 17:41:59 darkstar kernel: [  438.001373] Call Trace:
Oct  2 17:41:59 darkstar kernel: [  438.001381]  [<c022433f>] __might_sleep+0xde/0xe5
Oct  2 17:41:59 darkstar kernel: [  438.001386]  [<c0298843>] __kmalloc+0x4a/0x15a
Oct  2 17:41:59 darkstar kernel: [  438.001392]  [<c03f0065>] ? kzalloc+0xb/0xd
Oct  2 17:41:59 darkstar kernel: [  438.001396]  [<c03f0065>] kzalloc+0xb/0xd
Oct  2 17:41:59 darkstar kernel: [  438.001400]  [<c03f04ff>] device_private_init+0x15/0x3d
Oct  2 17:41:59 darkstar kernel: [  438.001405]  [<c03f24c5>] dev_set_drvdata+0x18/0x26
Oct  2 17:41:59 darkstar kernel: [  438.001414]  [<fa51fff7>] hci_conn_init_sysfs+0x40/0xd9 [bluetooth]
Oct  2 17:41:59 darkstar kernel: [  438.001422]  [<fa51cdc0>] ? hci_conn_add+0x128/0x186 [bluetooth]
Oct  2 17:41:59 darkstar kernel: [  438.001429]  [<fa51ce0f>] hci_conn_add+0x177/0x186 [bluetooth]
Oct  2 17:41:59 darkstar kernel: [  438.001437]  [<fa51cf8a>] hci_connect+0x3c/0xfb [bluetooth]
Oct  2 17:41:59 darkstar kernel: [  438.001442]  [<faa20e87>] l2cap_sock_connect+0x174/0x26b [l2cap]
Oct  2 17:41:59 darkstar kernel: [  438.001448]  [<c04c8df5>] sys_connect+0x60/0x7a
Oct  2 17:41:59 darkstar kernel: [  438.001453]  [<c024b703>] ? lock_release_non_nested+0x84/0x1de
Oct  2 17:41:59 darkstar kernel: [  438.001458]  [<c028804b>] ? might_fault+0x47/0x81
Oct  2 17:41:59 darkstar kernel: [  438.001462]  [<c028804b>] ? might_fault+0x47/0x81
Oct  2 17:41:59 darkstar kernel: [  438.001468]  [<c033361f>] ? __copy_from_user_ll+0x11/0xce
Oct  2 17:41:59 darkstar kernel: [  438.001472]  [<c04c9419>] sys_socketcall+0x82/0x17b
Oct  2 17:41:59 darkstar kernel: [  438.001477]  [<c020329d>] syscall_call+0x7/0xb

Signed-off-by: Dave Young <hidave.darkstar@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agotcp: fix TCP_DEFER_ACCEPT retrans calculation
Julian Anastasov [Mon, 19 Oct 2009 10:10:40 +0000]
tcp: fix TCP_DEFER_ACCEPT retrans calculation

Fix TCP_DEFER_ACCEPT conversion between seconds and
retransmission to match the TCP SYN-ACK retransmission periods
because the time is converted to such retransmissions. The old
algorithm selects one more retransmission in some cases. Allow
up to 255 retransmissions.

Signed-off-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agotcp: reduce SYN-ACK retrans for TCP_DEFER_ACCEPT
Julian Anastasov [Mon, 19 Oct 2009 10:03:58 +0000]
tcp: reduce SYN-ACK retrans for TCP_DEFER_ACCEPT

Change SYN-ACK retransmitting code for the TCP_DEFER_ACCEPT
users to not retransmit SYN-ACKs during the deferring period if
ACK from client was received. The goal is to reduce traffic
during the deferring period. When the period is finished
we continue with sending SYN-ACKs (at least one) but this time
any traffic from client will change the request to established
socket allowing application to terminate it properly.
Also, do not drop acked request if sending of SYN-ACK fails.

Signed-off-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agotcp: accept socket after TCP_DEFER_ACCEPT period
Julian Anastasov [Mon, 19 Oct 2009 10:01:56 +0000]
tcp: accept socket after TCP_DEFER_ACCEPT period

Willy Tarreau and many other folks in recent years
were concerned what happens when the TCP_DEFER_ACCEPT period
expires for clients which sent ACK packet. They prefer clients
that actively resend ACK on our SYN-ACK retransmissions to be
converted from open requests to sockets and queued to the
listener for accepting after the deferring period is finished.
Then application server can decide to wait longer for data
or to properly terminate the connection with FIN if read()
returns EAGAIN which is an indication for accepting after
the deferring period. This change still can have side effects
for applications that expect always to see data on the accepted
socket. Others can be prepared to work in both modes (with or
without TCP_DEFER_ACCEPT period) and their data processing can
ignore the read=EAGAIN notification and to allocate resources for
clients which proved to have no data to send during the deferring
period. OTOH, servers that use TCP_DEFER_ACCEPT=1 as flag (not
as a timeout) to wait for data will notice clients that didn't
send data for 3 seconds but that still resend ACKs.
Thanks to Willy Tarreau for the initial idea and to
Eric Dumazet for the review and testing the change.

Signed-off-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoRevert "tcp: fix tcp_defer_accept to consider the timeout"
David S. Miller [Tue, 20 Oct 2009 02:12:36 +0000]
Revert "tcp: fix tcp_defer_accept to consider the timeout"

This reverts commit 6d01a026b7d3009a418326bdcf313503a314f1ea.

Julian Anastasov, Willy Tarreau and Eric Dumazet have come up
with a more correct way to deal with this.

Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoAF_UNIX: Fix deadlock on connecting to shutdown socket
Tomoki Sekiyama [Mon, 19 Oct 2009 06:17:37 +0000]
AF_UNIX: Fix deadlock on connecting to shutdown socket

I found a deadlock bug in UNIX domain socket, which makes able to DoS
attack against the local machine by non-root users.

How to reproduce:
1. Make a listening AF_UNIX/SOCK_STREAM socket with an abstruct
    namespace(*), and shutdown(2) it.
 2. Repeat connect(2)ing to the listening socket from the other sockets
    until the connection backlog is full-filled.
 3. connect(2) takes the CPU forever. If every core is taken, the
    system hangs.

PoC code: (Run as many times as cores on SMP machines.)

int main(void)
{
int ret;
int csd;
int lsd;
struct sockaddr_un sun;

/* make an abstruct name address (*) */
memset(&sun, 0, sizeof(sun));
sun.sun_family = PF_UNIX;
sprintf(&sun.sun_path[1], "%d", getpid());

/* create the listening socket and shutdown */
lsd = socket(AF_UNIX, SOCK_STREAM, 0);
bind(lsd, (struct sockaddr *)&sun, sizeof(sun));
listen(lsd, 1);
shutdown(lsd, SHUT_RDWR);

/* connect loop */
alarm(15); /* forcely exit the loop after 15 sec */
for (;;) {
csd = socket(AF_UNIX, SOCK_STREAM, 0);
ret = connect(csd, (struct sockaddr *)&sun, sizeof(sun));
if (-1 == ret) {
perror("connect()");
break;
}
puts("Connection OK");
}
return 0;
}

(*) Make sun_path[0] = 0 to use the abstruct namespace.
    If a file-based socket is used, the system doesn't deadlock because
    of context switches in the file system layer.

Why this happens:
 Error checks between unix_socket_connect() and unix_wait_for_peer() are
 inconsistent. The former calls the latter to wait until the backlog is
 processed. Despite the latter returns without doing anything when the
 socket is shutdown, the former doesn't check the shutdown state and
 just retries calling the latter forever.

Patch:
 The patch below adds shutdown check into unix_socket_connect(), so
 connect(2) to the shutdown socket will return -ECONREFUSED.

Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama.qu@hitachi.com>
Signed-off-by: Masanori Yoshida <masanori.yoshida.tv@hitachi.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoethoc: clear only pending irqs
Thomas Chou [Wed, 7 Oct 2009 14:16:43 +0000]
ethoc: clear only pending irqs

This patch fixed the problem of dropped packets due to lost of
interrupt requests. We should only clear what was pending at the
moment we read the irq source reg.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoethoc: inline regs access
Thomas Chou [Wed, 7 Oct 2009 14:16:42 +0000]
ethoc: inline regs access

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agovmxnet3: use dev_dbg, fix build for CONFIG_BLOCK=n
Randy Dunlap [Sat, 17 Oct 2009 00:54:34 +0000]
vmxnet3: use dev_dbg, fix build for CONFIG_BLOCK=n

vmxnet3 was using dprintk() for debugging output.  This was
defined in <linux/dst.h> and was the only thing that was
used from that header file.  This caused compile errors
when CONFIG_BLOCK was not enabled due to bio* and BIO*
uses in the header file, so change this driver to use
dev_dbg() for debugging output.

include/linux/dst.h:520: error: dereferencing pointer to incomplete type
include/linux/dst.h:520: error: 'BIO_POOL_BITS' undeclared (first use in this function)
include/linux/dst.h:521: error: dereferencing pointer to incomplete type
include/linux/dst.h:522: error: dereferencing pointer to incomplete type
include/linux/dst.h:525: error: dereferencing pointer to incomplete type
make[4]: *** [drivers/net/vmxnet3/vmxnet3_drv.o] Error 1

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Bhavesh Davda <bhavesh@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agovirtio_net: use dev_kfree_skb_any() in free_old_xmit_skbs()
Eric Dumazet [Wed, 14 Oct 2009 14:36:43 +0000]
virtio_net: use dev_kfree_skb_any() in free_old_xmit_skbs()

Because netpoll can call netdevice start_xmit() method with
irqs disabled, drivers should not call kfree_skb() from
their start_xmit(), but use dev_kfree_skb_any() instead.

Oct  8 11:16:52 172.30.1.31 [113074.791813] ------------[ cut here ]------------
Oct  8 11:16:52 172.30.1.31 [113074.791813] WARNING: at net/core/skbuff.c:398 \
                skb_release_head_state+0x64/0xc8()
Oct  8 11:16:52 172.30.1.31 [113074.791813] Hardware name:
Oct  8 11:16:52 172.30.1.31 [113074.791813] Modules linked in: netconsole ocfs2 jbd2 quota_tree \
ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue configfs crc32c drbd cn loop \
serio_raw psmouse snd_pcm snd_timer snd soundcore snd_page_alloc virtio_net pcspkr parport_pc parport \
i2c_piix4 i2c_core button processor evdev ext3 jbd mbcache dm_mirror dm_region_hash dm_log dm_snapshot \
dm_mod ide_cd_mod cdrom ata_generic ata_piix virtio_blk libata scsi_mod piix ide_pci_generic ide_core \
                virtio_pci virtio_ring virtio floppy thermal fan thermal_sys [last unloaded: netconsole]
Oct  8 11:16:52 172.30.1.31 [113074.791813] Pid: 11132, comm: php5-cgi Tainted: G        W  \
                2.6.31.2-vserver #1
Oct  8 11:16:52 172.30.1.31 [113074.791813] Call Trace:
Oct  8 11:16:52 172.30.1.31 [113074.791813] <IRQ>  [<ffffffff81253cd5>] ? \
                skb_release_head_state+0x64/0xc8
Oct  8 11:16:52 172.30.1.31 [113074.791813] [<ffffffff81253cd5>] ? skb_release_head_state+0x64/0xc8
Oct  8 11:16:52 172.30.1.31 [113074.791813] [<ffffffff81049ae1>] ? warn_slowpath_common+0x77/0xa3
Oct  8 11:16:52 172.30.1.31 [113074.791813] [<ffffffff81253cd5>] ? skb_release_head_state+0x64/0xc8
Oct  8 11:16:52 172.30.1.31 [113074.791813] [<ffffffff81253a1a>] ? __kfree_skb+0x9/0x7d
Oct  8 11:16:52 172.30.1.31 [113074.791813] [<ffffffffa01cb139>] ? free_old_xmit_skbs+0x51/0x6e \
                [virtio_net]
Oct  8 11:16:52 172.30.1.31 [113074.791813] [<ffffffffa01cbc85>] ? start_xmit+0x26/0xf2 [virtio_net]
Oct  8 11:16:52 172.30.1.31 [113074.791813] [<ffffffff8126934f>] ? netpoll_send_skb+0xd2/0x205
Oct  8 11:16:52 172.30.1.31 [113074.791813] [<ffffffffa0429216>] ? write_msg+0x90/0xeb [netconsole]
Oct  8 11:16:52 172.30.1.31 [113074.791813] [<ffffffff81049f06>] ? __call_console_drivers+0x5e/0x6f
Oct  8 11:16:52 172.30.1.31 [113074.791813] [<ffffffff8102b49d>] ? kvm_clock_read+0x4d/0x52
Oct  8 11:16:52 172.30.1.31 [113074.791813] [<ffffffff8104a082>] ? release_console_sem+0x115/0x1ba
Oct  8 11:16:52 172.30.1.31 [113074.791813] [<ffffffff8104a632>] ? vprintk+0x2f2/0x34b
Oct  8 11:16:52 172.30.1.31 [113074.791813] [<ffffffff8106b142>] ? vx_update_load+0x18/0x13e
Oct  8 11:16:52 172.30.1.31 [113074.791813] [<ffffffff81308309>] ? printk+0x4e/0x5d
Oct  8 11:16:52 172.30.1.31 [113074.791813] [<ffffffff8102b49d>] ? kvm_clock_read+0x4d/0x52
Oct  8 11:16:52 172.30.1.31 [113074.791813] [<ffffffff81070b62>] ? getnstimeofday+0x55/0xaf
Oct  8 11:16:52 172.30.1.31 [113074.791813] [<ffffffff81062683>] ? ktime_get_ts+0x21/0x49
Oct  8 11:16:52 172.30.1.31 [113074.791813] [<ffffffff810626b7>] ? ktime_get+0xc/0x41
Oct  8 11:16:52 172.30.1.31 [113074.791813] [<ffffffff81062788>] ? hrtimer_interrupt+0x9c/0x146
Oct  8 11:16:52 172.30.1.31 [113074.791813] [<ffffffff81024a4b>] ? smp_apic_timer_interrupt+0x80/0x93
Oct  8 11:16:52 172.30.1.31 [113074.791813] [<ffffffff81011663>] ? apic_timer_interrupt+0x13/0x20
Oct  8 11:16:52 172.30.1.31 [113074.791813] <EOI>  [<ffffffff8130a9eb>] ? _spin_unlock_irq+0xd/0x31

Reported-and-tested-by: Massimo Cetra <mcetra@navynet.it>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Bug-Entry: http://bugzilla.kernel.org/show_bug.cgi?id=14378
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agobe2net: fix support for PCI hot plug
Sathya Perla [Wed, 14 Oct 2009 20:21:17 +0000]
be2net: fix support for PCI hot plug

Before issuing any cmds to the FW, the driver must first wait
till the fW becomes ready. This is needed for PCI hot plug when
the driver can be probed while the card fw is being initialized.

Signed-off-by: Sathya Perla <sathyap@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agobe2net: fix promiscuous and multicast promiscuous modes being enabled always
Sathya Perla [Wed, 14 Oct 2009 20:20:42 +0000]
be2net: fix promiscuous and multicast promiscuous modes being enabled always

Signed-off-by: Sathya Perla <sathyap@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agovmxnet: fix 2 build problems
Randy Dunlap [Thu, 15 Oct 2009 03:38:58 +0000]
vmxnet: fix 2 build problems

vmxnet3 uses in_dev* interfaces so it should depend on INET.
Also fix so that the driver builds when CONFIG_PCI_MSI is disabled.

vmxnet3_drv.c:(.text+0x2a88cb): undefined reference to `in_dev_finish_destroy'

drivers/net/vmxnet3/vmxnet3_drv.c:1335: error: 'struct vmxnet3_intr' has no member named 'msix_entries'
drivers/net/vmxnet3/vmxnet3_drv.c:1384: error: 'struct vmxnet3_intr' has no member named 'msix_entries'
drivers/net/vmxnet3/vmxnet3_drv.c:2137: error: 'struct vmxnet3_intr' has no member named 'msix_entries'
drivers/net/vmxnet3/vmxnet3_drv.c:2138: error: 'struct vmxnet3_intr' has no member named 'msix_entries'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Bhavesh davda <bhavesh@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agonet: add support for STMicroelectronics Ethernet controllers.
Giuseppe Cavallaro [Wed, 14 Oct 2009 22:13:45 +0000]
net: add support for STMicroelectronics Ethernet controllers.

This is the driver for the ST MAC 10/100/1000 on-chip Ethernet
controllers (Synopsys IP blocks).

Driver documentation:
 o http://stlinux.com/drupal/kernel/network/stmmac
Revisions:
 o http://stlinux.com/drupal/kernel/network/stmmac-driver-revisions
Performances:
 o http://stlinux.com/drupal/benchmarks/networking/stmmac

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agonet: ks8851_mll uses mii interfaces
Randy Dunlap [Wed, 14 Oct 2009 22:10:58 +0000]
net: ks8851_mll uses mii interfaces

From: Randy Dunlap <randy.dunlap@oracle.com>

ks8851_mll uses mii interfaces so it needs to select MII.

ks8851_mll.c:(.text+0xf95ac): undefined reference to `generic_mii_ioctl'
ks8851_mll.c:(.text+0xf96a0): undefined reference to `mii_ethtool_gset'
ks8851_mll.c:(.text+0xf96fa): undefined reference to `mii_ethtool_sset'
ks8851_mll.c:(.text+0xf9754): undefined reference to `mii_link_ok'
ks8851_mll.c:(.text+0xf97ae): undefined reference to `mii_nway_restart'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agonet/fec_mpc52xx: Fix kernel panic on FEC error
John Bonesio [Wed, 14 Oct 2009 22:10:19 +0000]
net/fec_mpc52xx: Fix kernel panic on FEC error

The MDIO bus cannot be accessed at interrupt context, but on an FEC
error, the fec_mpc52xx driver reset function also tries to reset the
PHY.  Since the error is detected at IRQ context, and the PHY functions
try to sleep, the kernel ends up panicking.

Resetting the PHY on an FEC error isn't even necessary.  This patch
solves the problem by removing the PHY reset entirely.

Signed-off-by: John Bonesio <bones@secretlab.ca>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agonet: Fix OF platform drivers coldplug/hotplug when compiled as modules
Anton Vorontsov [Wed, 14 Oct 2009 21:54:52 +0000]
net: Fix OF platform drivers coldplug/hotplug when compiled as modules

Some OF platform drivers are missing module device tables, so they won't
load automatically on boot. This patch fixes the issue by adding proper
MODULE_DEVICE_TABLE() macros to the drivers.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoTI DaVinci EMAC: Clear statistics register properly.
Sriram [Wed, 7 Oct 2009 02:44:30 +0000]
TI DaVinci EMAC: Clear statistics register properly.

The mechanism to clear the statistics register is dependent
on the status of GMIIEN bit in MAC control register. If the
GMIIEN bit is set, the stats registers are write to decrement.
If the GMIIEN bit is cleared, the stats registers are plain
read/write registers. The stats register clearing operation
must take into account the current state of GMIIEN as it
can be cleared when the interface is brought down.

With existing implementation logic, querying for interface stats
when the interface is down, can corrupt the statistics counters.
This patch examines the GMIIEN bit status in MAC_CONTROL
register before choosing an appropriate mask for clearing stats
registers.

Signed-off-by: Sriramakrishnan <srk@ti.com>
Acked-by: Chaithrika U S <chaithrika@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agor8169: partial support and phy init for the 8168d
françois romieu [Wed, 7 Oct 2009 12:44:20 +0000]
r8169: partial support and phy init for the 8168d

Extracted from Realtek's 8.012.00 r8168 driver.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Tested-by: Simon Farnsworth <simon.farnsworth@onelan.com>
Cc: Edward Hsu <edward_hsu@realtek.com.tw>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirel...
David S. Miller [Tue, 13 Oct 2009 18:41:34 +0000]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless-2.6

9 years agoirda/sa1100_ir: check return value of startup hook
Dmitry Artamonow [Tue, 13 Oct 2009 10:17:37 +0000]
irda/sa1100_ir: check return value of startup hook

Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoudp: Fix udp_poll() and ioctl()
Eric Dumazet [Fri, 9 Oct 2009 04:43:40 +0000]
udp: Fix udp_poll() and ioctl()

udp_poll() can in some circumstances drop frames with incorrect checksums.

Problem is we now have to lock the socket while dropping frames, or risk
sk_forward corruption.

This bug is present since commit 95766fff6b9a78d1
([UDP]: Add memory accounting.)

While we are at it, we can correct ioctl(SIOCINQ) to also drop bad frames.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoWAN: fix Cisco HDLC handshaking.
Krzysztof Halasa [Fri, 9 Oct 2009 06:16:10 +0000]
WAN: fix Cisco HDLC handshaking.

Cisco HDLC uses keepalive packets and sequence numbers to determine link
state. In rare cases both ends could transmit keepalive packets at the same
time, causing the received sequence numbers to be treated as incorrect.
Now we accept our current sequence number as well as the previous one.

Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agotcp: fix tcp_defer_accept to consider the timeout
Willy Tarreau [Tue, 13 Oct 2009 07:27:40 +0000]
tcp: fix tcp_defer_accept to consider the timeout

I was trying to use TCP_DEFER_ACCEPT and noticed that if the
client does not talk, the connection is never accepted and
remains in SYN_RECV state until the retransmits expire, where
it finally is deleted. This is bad when some firewall such as
netfilter sits between the client and the server because the
firewall sees the connection in ESTABLISHED state while the
server will finally silently drop it without sending an RST.

This behaviour contradicts the man page which says it should
wait only for some time :

       TCP_DEFER_ACCEPT (since Linux 2.4)
          Allows a listener to be awakened only when data arrives
          on the socket.  Takes an integer value  (seconds), this
          can  bound  the  maximum  number  of attempts TCP will
          make to complete the connection. This option should not
          be used in code intended to be portable.

Also, looking at ipv4/tcp.c, a retransmit counter is correctly
computed :

        case TCP_DEFER_ACCEPT:
                icsk->icsk_accept_queue.rskq_defer_accept = 0;
                if (val > 0) {
                        /* Translate value in seconds to number of
                         * retransmits */
                        while (icsk->icsk_accept_queue.rskq_defer_accept < 32 &&
                               val > ((TCP_TIMEOUT_INIT / HZ) <<
                                       icsk->icsk_accept_queue.rskq_defer_accept))
                                icsk->icsk_accept_queue.rskq_defer_accept++;
                        icsk->icsk_accept_queue.rskq_defer_accept++;
                }
                break;

==> rskq_defer_accept is used as a counter of retransmits.

But in tcp_minisocks.c, this counter is only checked. And in
fact, I have found no location which updates it. So I think
that what was intended was to decrease it in tcp_minisocks
whenever it is checked, which the trivial patch below does.

Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years ago3c574_cs: spin_lock the set_multicast_list function
Ken Kawasaki [Tue, 13 Oct 2009 07:32:55 +0000]
3c574_cs: spin_lock the set_multicast_list function

3c574_cs:
 spin_lock the set_multicast_list function.

Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agonet: Teach pegasus driver to ignore bluetoother adapters with clashing Vendor:Product IDs
Chris Rankin [Tue, 13 Oct 2009 07:32:02 +0000]
net: Teach pegasus driver to ignore bluetoother adapters with clashing Vendor:Product IDs

The Belkin F8T012xx1 bluetooth adaptor has the same vendor and product
IDs as the Belkin F5D5050, so we need to teach the pegasus driver to
ignore adaptors belonging to the "Wireless" class 0xE0. For this one
case anyway, seeing as pegasus is a driver for "Wired" adaptors.

Signed-off-by: Chris Rankin <rankincj@yahoo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agonetxen: fix pci bar mapping
Dhananjay Phadke [Tue, 13 Oct 2009 07:26:04 +0000]
netxen: fix pci bar mapping

Use resource_size_t for PCI resource remapping instead
of unsigned long. Physical addresses can exceed range of
long data type (e.g with PAE).

Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoethoc: fix warning from 32bit build
Alan Cox [Mon, 12 Oct 2009 05:27:55 +0000]
ethoc: fix warning from 32bit build

drivers/net/ethoc.c: In function ‘ethoc_open’:
drivers/net/ethoc.c:667: warning: comparison of distinct pointer types
lacks a cast

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agolibertas: fix build
Alan Cox [Mon, 12 Oct 2009 05:27:48 +0000]
libertas: fix build

drivers/net/wireless/libertas/cmdresp.c: In function ‘lbs_process_event’:
drivers/net/wireless/libertas/cmdresp.c:519: error: ‘TASK_INTERRUPTIBLE’
undeclared (first use in this function)
drivers/net/wireless/libertas/cmdresp.c:519: error: (Each undeclared
identifier is reported only once
drivers/net/wireless/libertas/cmdresp.c:519: error: for each function it
appears in.)

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agonet: VMware virtual Ethernet NIC driver: vmxnet3
Shreyas Bhatewara [Tue, 13 Oct 2009 07:15:51 +0000]
net: VMware virtual Ethernet NIC driver: vmxnet3

Ethernet NIC driver for VMware's vmxnet3

From: Shreyas Bhatewara <sbhatewara@vmware.com>

This patch adds driver support for VMware's virtual Ethernet NIC: vmxnet3
Guests running on VMware hypervisors supporting vmxnet3 device will thus have
access to improved network functionalities and performance.

Signed-off-by: Shreyas Bhatewara <sbhatewara@vmware.com>
Signed-off-by: Bhavesh Davda <bhavesh@vmware.com>
Signed-off-by: Ronghua Zhang <ronghua@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agonet: Fix IXP 2000 network driver building.
Vincent Sanders [Tue, 13 Oct 2009 07:03:11 +0000]
net: Fix IXP 2000 network driver building.

The IXP 2000 network driver was failing to build as it has its own
statistics gathering which was not compatible with the recent network
device operations changes. This patch fixes the driver in the obvious
way and has been compile tested. I have been unable to get the ixp2000
maintainer to comment or test this fix.

Signed-off-by: Vincent Sanders <vince@simtec.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agolibertas: fix build
Alan Cox [Mon, 12 Oct 2009 15:27:48 +0000]
libertas: fix build

drivers/net/wireless/libertas/cmdresp.c: In function ‘lbs_process_event’:
drivers/net/wireless/libertas/cmdresp.c:519: error: ‘TASK_INTERRUPTIBLE’
undeclared (first use in this function)
drivers/net/wireless/libertas/cmdresp.c:519: error: (Each undeclared
identifier is reported only once
drivers/net/wireless/libertas/cmdresp.c:519: error: for each function it
appears in.)

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

9 years agomac80211: document ieee80211_rx() context requirement
Johannes Berg [Sun, 11 Oct 2009 13:10:40 +0000]
mac80211: document ieee80211_rx() context requirement

ieee80211_rx() must be called with softirqs disabled
since the networking stack requires this for netif_rx()
and some code in mac80211 can assume that it can not
be processing its own tasklet and this call at the same
time.

It may be possible to remove this requirement after a
careful audit of mac80211 and doing any needed locking
improvements in it along with disabling softirqs around
netif_rx(). An alternative might be to push all packet
processing to process context in mac80211, instead of
to the tasklet, and add other synchronisation.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

9 years agob43: fix ieee80211_rx() context
Johannes Berg [Sun, 11 Oct 2009 10:19:21 +0000]
b43: fix ieee80211_rx() context

Due to the way it interacts with the networking
stack and other parts of mac80211, ieee80211_rx()
must be called with disabled softirqs.

[1] http://thread.gmane.org/gmane.linux.kernel.wireless.general/39440/focus=40266

Reported-by: Dave Young <hidave.darkstar@gmail.com>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

9 years agomac80211: fix ibss race
Johannes Berg [Sun, 11 Oct 2009 09:47:57 +0000]
mac80211: fix ibss race

When a scan completes, we call ieee80211_sta_find_ibss(),
which is also called from other places. When the scan was
done in software, there's no problem as both run from the
single-threaded mac80211 workqueue and are thus serialised
against each other, but with hardware scan the completion
can be in a different context and race against callers of
this function from the workqueue (e.g. due to beacon RX).
So instead of calling ieee80211_sta_find_ibss() directly,
just arm the timer and have it fire, scheduling the work,
which will invoke ieee80211_sta_find_ibss() (if that is
appropriate in the current state).

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

9 years agomac80211: fix logic error ibss merge bssid check
Felix Fietkau [Sun, 11 Oct 2009 03:21:10 +0000]
mac80211: fix logic error ibss merge bssid check

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

9 years agoiwlwifi: change the order of freeing memory
Wey-Yi Guy [Fri, 9 Oct 2009 20:20:17 +0000]
iwlwifi: change the order of freeing memory

Need to free the dynamic allocated memory before ieee80211_free_hw();
once call ieee80211_free_hw(), should not reference to "priv" data
structure.

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

9 years agoacenic: Pass up error code from ace_load_firmware()
Ben Hutchings [Mon, 12 Oct 2009 11:18:48 +0000]
acenic: Pass up error code from ace_load_firmware()

If ace_load_firmware() fails, ace_init() cleans up but still returns
0, leading to an oops as seen in <http://bugs.debian.org/521383>.
It should pass the error code up.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agonet: Fix struct sock bitfield annotation
Eric Dumazet [Thu, 8 Oct 2009 22:50:25 +0000]
net: Fix struct sock bitfield annotation

Since commit a98b65a3 (net: annotate struct sock bitfield), we lost
8 bytes in struct sock on 64bit arches because of
kmemcheck_bitfield_end(flags) misplacement.

Fix this by putting together sk_shutdown, sk_no_check, sk_userlocks,
sk_protocol and sk_type in the 'flags' 32bits bitfield

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agopkt_sched: pedit use proper struct
jamal [Sun, 11 Oct 2009 04:21:38 +0000]
pkt_sched: pedit use proper struct

This probably deserves to go into -stable.

Pedit will reject a policy that is large because it
uses the wrong structure in the policy validation.
This fixes it.

Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agonet: Add patchwork URL to MAINTAINERS
Eric Dumazet [Sat, 10 Oct 2009 21:40:54 +0000]
net: Add patchwork URL to MAINTAINERS

Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agonet: Link in PHY drivers before others.
David S. Miller [Fri, 9 Oct 2009 21:24:36 +0000]
net: Link in PHY drivers before others.

We need PHY drivers to initialize in a static kernel before
the MAC drivers that use them.  So link them in first.

Based upon a report by Felix Radensky.

Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoibm_newemac: Added 16K Tx FIFO size support for EMAC4
Dave Mitchell [Thu, 8 Oct 2009 06:32:21 +0000]
ibm_newemac: Added 16K Tx FIFO size support for EMAC4

Some of the EMAC V4 implementations support 16K Tx FIFOs. This
patch adds support for this functionality and fixes typos in the
Tx FIFO size error messages.

Signed-off-by: Dave Mitchell <dmitchell@appliedmicro.com>
Acked-by: Prodyut Hazarika <phazarika@appliedmicro.com>
Acked-by: Victor Gallardo <vgallardo@appliedmicro.com>
Acked-by: Loc Ho <lho@appliedmicro.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoqlge: Add disable/enable firmare irqs to handler.
Ron Mercer [Thu, 8 Oct 2009 09:54:43 +0000]
qlge: Add disable/enable firmare irqs to handler.

This was accidentally omitted from one of the previous patches for firmware event
handling.  The handler needs to the enable firmware irq mask when it's done
processing or it may not get any more events interrupts.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoqlge: Restore rx mode after internal reset.
Ron Mercer [Thu, 8 Oct 2009 09:54:42 +0000]
qlge: Restore rx mode after internal reset.

Call set_multi API after reset recovery.  This was exposed by tripping
tx_timeout.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoqlge: Fix chip reset process.
Ron Mercer [Thu, 8 Oct 2009 09:54:41 +0000]
qlge: Fix chip reset process.

Add wait for NIC fifo and MGMNT fifo to empty before applying reset.
Otherwise broken frames can be processed by management processor and
cause it to hang.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoqlge: Fix RX multicast filter settings.
Ron Mercer [Thu, 8 Oct 2009 09:54:40 +0000]
qlge: Fix RX multicast filter settings.

The addresses were being added to the filter properly, but were not
being enabled.  This adds enable bit to filter write.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoqlge: Fix frame routing for multicast frames.
Ron Mercer [Thu, 8 Oct 2009 09:54:39 +0000]
qlge: Fix frame routing for multicast frames.

Broadcast/multicast should always be routed to the default (zeroeth) rx
ring.  Broadcast frames are already routed correctly.  This fixes
routing for multicast frames.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>