11 years agoi2c: Kill rogue driver IDs
Jean Delvare [Sun, 27 Jan 2008 17:14:47 +0000]
i2c: Kill rogue driver IDs

I2C driver IDs are optional, so if you don't need one, just omit it.

Signed-off-by: Jean Delvare <khali@linux-fr.org>

11 years agoi2c: normal_i2c can be made const (remaining drivers)
Jean Delvare [Sun, 27 Jan 2008 17:14:47 +0000]
i2c: normal_i2c can be made const (remaining drivers)

Signed-off-by: Jean Delvare <khali@linux-fr.org>

11 years agoi2c: normal_i2c can be made const (rtc drivers)
Jean Delvare [Sun, 27 Jan 2008 17:14:47 +0000]
i2c: normal_i2c can be made const (rtc drivers)

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Alessandro Zummo <alessandro.zummo@towertech.it>

11 years agoi2c: Constify client address data
Mark M. Hoffman [Sun, 27 Jan 2008 17:14:46 +0000]
i2c: Constify client address data

This patch allows much of the I2C client address data to move from initdata
into text.

Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

11 years agoi2c-algo-pcf: Delete broken 10-bit address support
Jean Delvare [Sun, 27 Jan 2008 17:14:46 +0000]
i2c-algo-pcf: Delete broken 10-bit address support

The 10-bit address support in i2c-algo-pcf is so heavily broken that
it can't have ever been used. Nobody ever complained, so I'll take it
that nobody needs it. Let's just delete it.

Signed-off-by: Jean Delvare <khali@linux-fr.org>

11 years agoi2c-algo-bit: Fix NAK/ARB comments
David Brownell [Sun, 27 Jan 2008 17:14:46 +0000]
i2c-algo-bit: Fix NAK/ARB comments

Update comments and logging on return path for byte writes.  NAK is
an error, to be reported or optionally ignored.  Timeouts are always
errors.  Lost arbitration is not currently handled, so don't even list
it as an option in the error message.

Don't return bogus EFAULT code for inappropriate NAK; EIO is better,
there is no bad userspace address in question.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

11 years agoi2c-algo-bit: Whitespace fixes (+ NAK/ARB comments)
David Brownell [Sun, 27 Jan 2008 17:14:46 +0000]
i2c-algo-bit: Whitespace fixes (+ NAK/ARB comments)

Fix *LOTS* of whitespace goofs and checkpatch.pl warnings, strangely
parenthesized ternary expressions, and other CodingStyle glitches.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

11 years agoi2c-pxa: Remove hardcoded #ifdef and use cpu_is_pxa27x
eric miao [Sun, 27 Jan 2008 17:14:46 +0000]
i2c-pxa: Remove hardcoded #ifdef and use cpu_is_pxa27x

remove #ifdef CONFIG_PXA27x .. #endif and use cpu_is_pxaXXXX() macros
so that a single binary can support PXA25x/PXA27x/PXA3xx at run-time.

Signed-off-by: eric miao <eric.miao@marvell.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

11 years agoi2c: some overdue driver removal
Adrian Bunk [Sun, 27 Jan 2008 17:14:46 +0000]
i2c: some overdue driver removal

This patch contains the overdue removal of three I2C drivers.

[JD: In fact only i2c-ixp4xx can be removed at the moment, the other two
platforms don't implement the generic GPIO layer yet.]

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

11 years agoixp4xx-i2c-gpio
Michael-Luke Jones [Sun, 27 Jan 2008 17:14:46 +0000]
ixp4xx-i2c-gpio

Migrate all ixp4xx devices to the bitbanging I2C bus driver utilizing
the arch-neutral GPIO API (linux/i2c-gpio.h).

Tested by the nslu2-linux and openwrt projects in public firmware releases.

Signed-off-by: Michael-Luke Jones <mlj28@cam.ac.uk>
Acked-by: Rod Whitby <rod@whitby.id.au>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

11 years agoi2c: the scheduled I2C RTC driver removal
Adrian Bunk [Sun, 27 Jan 2008 17:14:45 +0000]
i2c: the scheduled I2C RTC driver removal

This patch contains the scheduled removal of legacy I2C RTC drivers with
replacement drivers.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

11 years agoi2c-stub: Use a single array for byte and word operations
Jean Delvare [Sun, 27 Jan 2008 17:14:45 +0000]
i2c-stub: Use a single array for byte and word operations

This mimics the behavior of actual SMBus chips better.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Mark M. Hoffman <mhoffman@lightlink.com>

11 years agoi2c-stub: Mention the existence of an helper script
Jean Delvare [Sun, 27 Jan 2008 17:14:45 +0000]
i2c-stub: Mention the existence of an helper script

There's a new script named i2c-stub-from-dump that can be very helpful
when working with the i2c-stub driver.

Signed-off-by: Jean Delvare <khali@linux-fr.org>

11 years agoi2c/tsl2550: Add power management added
Rodolfo Giometti [Sun, 27 Jan 2008 17:14:45 +0000]
i2c/tsl2550: Add power management added

Signed-off-by: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

11 years agoi2c: Add support for the PCF8575 chip
Bart Van Assche [Sun, 27 Jan 2008 17:14:45 +0000]
i2c: Add support for the PCF8575 chip

Signed-off-by: Bart Van Assche <bart.vanassche@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

11 years agoi2c-ibm_iic: Whitespace cleanup
Stefan Roese [Sun, 27 Jan 2008 17:14:45 +0000]
i2c-ibm_iic: Whitespace cleanup

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

11 years agoi2c-pasemi: use i2c_add_numbered_adapter()
Olof Johansson [Sun, 27 Jan 2008 17:14:44 +0000]
i2c-pasemi: use i2c_add_numbered_adapter()

Use numbered adapter registration to always have the same hardware bus
show up at the same number.

PWRficient 1682M has three buses, they are all on the same PCI device but
different functions. So do the simple thing and register them based on
function number. Future products, if having a different number of busses,
are expected to have similar behaviour w.r.t. device/function layout.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

11 years agoi2c-nforce2: The nForce2 can do block transactions
Jean Delvare [Sun, 27 Jan 2008 17:14:44 +0000]
i2c-nforce2: The nForce2 can do block transactions

My guess is that all the chips supported by this driver support block
transactions and reset, but for now we play it safe and only list the
ones for which this was actually tested.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Oleg Ryjkov <olegr@olegr.ca>

11 years agoprintk: revert ktime_get() timestamps
Ingo Molnar [Sun, 27 Jan 2008 07:03:54 +0000]
printk: revert ktime_get() timestamps

revert 19ef9309273d26cb005cb23e6a370353dca91099.

Kevin Winchester reported a lockup during X startup an bisected
it to this commit.

Reported-by: Kevin Winchester <kjwinchester@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6
Linus Torvalds [Sun, 27 Jan 2008 07:01:20 +0000]
Merge git://git./linux/kernel/git/sfrench/cifs-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  [CIFS] DFS build fixes
  [CIFS] DFS support: provide shrinkable mounts
  [CIFS] Do not log path names in lookup errors
  [CIFS] DFS support patchset: Added mountdata
  [CIFS] Forgot to add two new files from previous commit
  [CIFS] DNS name resolution helper upcall for cifs
  [CIFS] fix checkpatch warnings in fs/cifs/inode.c
  [CIFS] hold ses sem on tcp session reconnect during mount
  [CIFS] Allow setting mode via cifs acl
  [CIFS]  fix unicode string alignment in SPNEGO setup
  [CIFS] cifs_partialpagewrite() cleanup
  [CIFS]  use krb5 session key from first SMB session after a NegProt
  [CIFS] redo existing session setup if needed in cifs_mount
  [CIFS] Only dump SPNEGO key if CONFIG_CIFS_DEBUG2 is set
  [CIFS] fix SetEA failure to some Samba versions

11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6
Linus Torvalds [Sun, 27 Jan 2008 06:54:32 +0000]
Merge git://git./linux/kernel/git/bart/ide-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (63 commits)
  ide: remove REQ_TYPE_ATA_CMD
  ide: switch ide_cmd_ioctl() to use REQ_TYPE_ATA_TASKFILE requests
  ide: switch set_xfer_rate() to use REQ_TYPE_ATA_TASKFILE requests
  ide: fix final status check in drive_cmd_intr()
  ide: check BUSY and ERROR status bits before reading data in drive_cmd_intr()
  ide: don't enable local IRQs for PIO-in in driver_cmd_intr() (take 2)
  ide: convert "empty" REQ_TYPE_ATA_CMD requests to use REQ_TYPE_ATA_TASKFILE
  ide: initialize rq->cmd_type in ide_init_drive_cmd() callers
  ide: use wait_drive_not_busy() in drive_cmd_intr() (take 2)
  ide: kill DATA_READY define
  ide: task_end_request() fix
  ide: use rq->nr_sectors in task_end_request()
  ide: remove needless ->cursg clearing from task_end_request()
  ide: set IDE_TFLAG_IN_* flags before queuing/executing command
  ide-tape: fix handling of non-special requests in ->end_request method
  ide: fix final status check in task_in_intr()
  ide: clear HOB bit for REQ_TYPE_ATA_CMD requests in ide_end_drive_cmd()
  ide: fix ->io_32bit race in ide_taskfile_ioctl()
  cmd64x: remove /proc/ide/cmd64x
  ide: remove broken disk byte-swapping support
  ...

11 years agoMerge branch 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6
Linus Torvalds [Sun, 27 Jan 2008 06:52:53 +0000]
Merge branch 'for-linus' of git://git390.osdl.marist.edu/linux-2.6

* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: (56 commits)
  [S390] replace lock_cpu_hotplug with get_online_cpus
  [S390] usage of s390dbf: shrink number of debug areas to use.
  [S390] constify function pointer tables.
  [S390] do local_irq_restore while spinning in spin_lock_irqsave.
  [S390] add smp_call_function_mask
  [S390] dasd: fix loop in request expiration handling
  [S390] Unused field / extern declaration in processor.h
  [S390] Remove TOPDIR from Makefile
  [S390] dasd: add hyper PAV support to DASD device driver, part 1
  [S390] single-step cleanup
  [S390] Move NOTES and BUG_TABLE.
  [S390] drivers/s390/: Spelling fixes
  [S390] include/asm-s390/: Spelling fixes
  [S390] arch/s390/: Spelling fixes
  [S390] Use diag308 subcodes 3 and 6 for reboot and dump when possible.
  [S390] vmemmap: allocate struct pages before 1:1 mapping
  [S390] Initialize sclp_ipl_info
  [S390] Allocate and free cpu lowcores and stacks when needed/possible.
  [S390] use LIST_HEAD instead of LIST_HEAD_INIT
  [S390] Load disabled wait psw instead of stopping cpu on halt.
  ...

11 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris...
Linus Torvalds [Sun, 27 Jan 2008 06:43:56 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/jmorris/selinux-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6:
  selinux: fix labeling of /proc/net inodes

11 years agoide: remove REQ_TYPE_ATA_CMD
Bartlomiej Zolnierkiewicz [Sat, 26 Jan 2008 19:13:13 +0000]
ide: remove REQ_TYPE_ATA_CMD

Based on the earlier work by Tejun Heo.

All users are gone so we can finally remove it.

Cc: Tejun Heo <htejun@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide: switch ide_cmd_ioctl() to use REQ_TYPE_ATA_TASKFILE requests
Bartlomiej Zolnierkiewicz [Sat, 26 Jan 2008 19:13:13 +0000]
ide: switch ide_cmd_ioctl() to use REQ_TYPE_ATA_TASKFILE requests

Based on the earlier work by Tejun Heo.

There should be no functionality changes caused by this patch.

Cc: Tejun Heo <htejun@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide: switch set_xfer_rate() to use REQ_TYPE_ATA_TASKFILE requests
Bartlomiej Zolnierkiewicz [Sat, 26 Jan 2008 19:13:12 +0000]
ide: switch set_xfer_rate() to use REQ_TYPE_ATA_TASKFILE requests

Based on the earlier work by Tejun Heo.

Switch set_xfer_rate() to use REQ_TYPE_ATA_TASKFILE requests
and make ide_wait_cmd() static.

There should be no functionality changes caused by this patch.

Cc: Tejun Heo <htejun@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide: fix final status check in drive_cmd_intr()
Bartlomiej Zolnierkiewicz [Sat, 26 Jan 2008 19:13:12 +0000]
ide: fix final status check in drive_cmd_intr()

Don't check for READY_STAT bit being set for PIO-in protocol (makes the
final status check in drive_cmd_intr() match the one in task_in_intr()).

Also fix function name reported by ide_error() call while at it.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide: check BUSY and ERROR status bits before reading data in drive_cmd_intr()
Bartlomiej Zolnierkiewicz [Sat, 26 Jan 2008 19:13:12 +0000]
ide: check BUSY and ERROR status bits before reading data in drive_cmd_intr()

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide: don't enable local IRQs for PIO-in in driver_cmd_intr() (take 2)
Bartlomiej Zolnierkiewicz [Sat, 26 Jan 2008 19:13:12 +0000]
ide: don't enable local IRQs for PIO-in in driver_cmd_intr() (take 2)

Don't enable local IRQs for PIO-in protocol in driver_cmd_intr().

While at it:

* Remove redundant rq->cmd_type check.

* Read status register after enabling local IRQs for no-data protocol.

v2:
* Re-add DRQ=1 check lost in v1 (noticed by Sergei).

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide: convert "empty" REQ_TYPE_ATA_CMD requests to use REQ_TYPE_ATA_TASKFILE
Bartlomiej Zolnierkiewicz [Sat, 26 Jan 2008 19:13:12 +0000]
ide: convert "empty" REQ_TYPE_ATA_CMD requests to use REQ_TYPE_ATA_TASKFILE

Based on the previous work by Tejun Heo.

There should be no functionality changes caused by this patch.

Cc: Tejun Heo <htejun@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide: initialize rq->cmd_type in ide_init_drive_cmd() callers
Bartlomiej Zolnierkiewicz [Sat, 26 Jan 2008 19:13:11 +0000]
ide: initialize rq->cmd_type in ide_init_drive_cmd() callers

* Initialize rq->cmd_type in ide_wait_cmd(), ide_cmd_ioctl() and
  set_pio_mode() (other callers were aleady over-riding rq->cmd_type).

* Remove no longer needed rq->cmd_type setup from ide_init_drive_cmd().

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide: use wait_drive_not_busy() in drive_cmd_intr() (take 2)
Bartlomiej Zolnierkiewicz [Sat, 26 Jan 2008 19:13:11 +0000]
ide: use wait_drive_not_busy() in drive_cmd_intr() (take 2)

Use wait_drive_not_busy() in drive_cmd_intr().

v2:
* Fix wait_drive_not_busy() comment (noticed by Sergei).

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide: kill DATA_READY define
Bartlomiej Zolnierkiewicz [Sat, 26 Jan 2008 19:13:11 +0000]
ide: kill DATA_READY define

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide: task_end_request() fix
Tejun Heo [Sat, 26 Jan 2008 19:13:11 +0000]
ide: task_end_request() fix

task_end_request() modified to always call ide_end_drive_cmd()
for taskfile requests.  Previously, ide_end_drive_cmd() was
called only when IDE_TFLAG_FLAGGED was set.  Also,
ide_dma_intr() is modified to use task_end_request().

Enables TASKFILE ioctls to get valid register outputs on
successful completion.

Bart:
- ported it over recent IDE changes

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide: use rq->nr_sectors in task_end_request()
Bartlomiej Zolnierkiewicz [Sat, 26 Jan 2008 19:13:11 +0000]
ide: use rq->nr_sectors in task_end_request()

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide: remove needless ->cursg clearing from task_end_request()
Bartlomiej Zolnierkiewicz [Sat, 26 Jan 2008 19:13:11 +0000]
ide: remove needless ->cursg clearing from task_end_request()

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide: set IDE_TFLAG_IN_* flags before queuing/executing command
Bartlomiej Zolnierkiewicz [Sat, 26 Jan 2008 19:13:10 +0000]
ide: set IDE_TFLAG_IN_* flags before queuing/executing command

* Add IDE_TFLAG_{HOB,TF,DEVICE} defines.

* Set IDE_TFLAG_IN_* flags in {do_rw,ide_no_data,ide_raw}_taskfile() users.

* Remove no longer needed ->tf_flags setup from ide_end_drive_cmd().

There should be no functionality changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide-tape: fix handling of non-special requests in ->end_request method
Bartlomiej Zolnierkiewicz [Sat, 26 Jan 2008 19:13:10 +0000]
ide-tape: fix handling of non-special requests in ->end_request method

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide: fix final status check in task_in_intr()
Bartlomiej Zolnierkiewicz [Sat, 26 Jan 2008 19:13:10 +0000]
ide: fix final status check in task_in_intr()

Check for DRQ bit being cleared on the final status check.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide: clear HOB bit for REQ_TYPE_ATA_CMD requests in ide_end_drive_cmd()
Bartlomiej Zolnierkiewicz [Sat, 26 Jan 2008 19:13:10 +0000]
ide: clear HOB bit for REQ_TYPE_ATA_CMD requests in ide_end_drive_cmd()

ide_dump_status() may set HOB bit before ide_end_drive_cmd() is called.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide: fix ->io_32bit race in ide_taskfile_ioctl()
Tejun Heo [Sat, 26 Jan 2008 19:13:10 +0000]
ide: fix ->io_32bit race in ide_taskfile_ioctl()

In ide_taskfile_ioctl(), there was a race condition involving
drive->io_32bit.  It was cleared and restored during ioctl
requests but there was no synchronization with other requests.
So, other requests could execute with the altered ->io_32bit
setting or updated drive->io_32bit could be overwritten by
ide_taskfile_ioctl().

This patch adds IDE_TFLAG_IO_16BIT flag to indicate to
ide_pio_datablock() that 16-bit I/O is needed regardless of
drive->io_32bit settting.

Bart:
- ported it over recent IDE changes

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agocmd64x: remove /proc/ide/cmd64x
Bartlomiej Zolnierkiewicz [Sat, 26 Jan 2008 19:13:09 +0000]
cmd64x: remove /proc/ide/cmd64x

This belongs to user-space (and only if really needed).

   text    data     bss     dec     hex filename
   3874     180      28    4082     ff2 drivers/ide/pci/cmd64x.o.before
   2231     180       0    2411     96b drivers/ide/pci/cmd64x.o.after

Additionaly to being bloat the code reported incorrect UDMA modes for
the reserved values of UDIDETCR0/1 registers.

Also while at it remove unused CNTRL_DIS_RA0/1 defines.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide: remove broken disk byte-swapping support
Bartlomiej Zolnierkiewicz [Sat, 26 Jan 2008 19:13:09 +0000]
ide: remove broken disk byte-swapping support

Remove broken disk byte-swapping support:
- it can cause a data corruption on SMP (or if using PREEMPT on UP)
- all data coming from disk are byte-swapped by taskfile_*_data() which
  results in incorrect identify data being reported by /proc/ide/ and IOCTLs
- "hdx=bswap/byteswap" kernel parameter has been broken on m68k host drivers
  (including Atari/Q40 ones) since 2.5.x days (because of 'hwif' zero-ing)
- byte-swapping is limited to PIO transfers (for working with TiVo disks on
  x86 machines using user-space solutions or dm-byteswap should result in
  much better performance because DMA can be used)

For previous discussions please see:

http://www.ussg.iu.edu/hypermail/linux/kernel/0201.0/0768.html
http://lkml.org/lkml/2004/2/28/111

[ I have dm-byteswap device mapper target if somebody is interested
  (patch is for 2.6.4 though but I'll dust it off if needed). ]

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide: add ide_busy_sleep() helper
Bartlomiej Zolnierkiewicz [Sat, 26 Jan 2008 19:13:09 +0000]
ide: add ide_busy_sleep() helper

Add ide_busy_sleep() helper and use it in do_probe(),
enable_nest() and probe_hwif().

As a nice side-effect this fixes a minor bug in do_probe()
(the code was reading status register without any delay).

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide: make CONFIG_IDEPCI_PCIBUS_ORDER visible and deprecate it
Bartlomiej Zolnierkiewicz [Sat, 26 Jan 2008 19:13:09 +0000]
ide: make CONFIG_IDEPCI_PCIBUS_ORDER visible and deprecate it

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide: move CONFIG_IDEPCI_PCIBUS_ORDER code to ide-scan-pci.c
Bartlomiej Zolnierkiewicz [Sat, 26 Jan 2008 19:13:09 +0000]
ide: move CONFIG_IDEPCI_PCIBUS_ORDER code to ide-scan-pci.c

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide: print banner message once per controller in m68k host drivers
Bartlomiej Zolnierkiewicz [Sat, 26 Jan 2008 19:13:09 +0000]
ide: print banner message once per controller in m68k host drivers

* Print banner message once per controller in m68k host drivers.

* Change printk() level to KERN_INFO in buddha, falconide and gayle.

* Add banner message to q40ide.

This is basically a preparation for the future IDE layer changes.

Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide: add ide_set_irq() inline helper
Bartlomiej Zolnierkiewicz [Sat, 26 Jan 2008 19:13:08 +0000]
ide: add ide_set_irq() inline helper

There should be no functionality changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide-pmac: use custom hwif->sg_max_nents only if DMA support is enabled
Bartlomiej Zolnierkiewicz [Sat, 26 Jan 2008 19:13:08 +0000]
ide-pmac: use custom hwif->sg_max_nents only if DMA support is enabled

Move setting hwif->sg_max_nents from pmac_ide_setup_device()
to pmac_ide_setup_dma().

Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agorapide: remove write-only hwif->hwif_data
Bartlomiej Zolnierkiewicz [Sat, 26 Jan 2008 19:13:08 +0000]
rapide: remove write-only hwif->hwif_data

Cc: Russell King <rmk@arm.linux.org.uk>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide: use ide_init_port_hw() in setup-pci.c
Bartlomiej Zolnierkiewicz [Sat, 26 Jan 2008 19:13:08 +0000]
ide: use ide_init_port_hw() in setup-pci.c

* Move setting hwif->gendev.parent from ide_pci_setup_ports()
  to ide_hwif_configure().

* Always set hwif->io_ports in ide_hwif_configure().

* Use ide_init_port_hw() in ide_hwif_configure().

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide: always use ide_std_init_ports() in setup-pci.c
Bartlomiej Zolnierkiewicz [Sat, 26 Jan 2008 19:13:08 +0000]
ide: always use ide_std_init_ports() in setup-pci.c

* ide_init_hwif_ports() call in setup-pci.c::ide_hwif_configure()
  doesn't depend on the default cotrol register offset, default IRQ
  or ppc_ide_md.ide_init_hwif implementations so ide_std_init_ports()
  can always be used.

* Since 'base' is always non-zero and thus hwif->io_ports[IDE_DATA_OFFSET]
  is also non-zero always clear hwif->noprobe.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoau1xxx-ide: use ide_init_port_hw()
Bartlomiej Zolnierkiewicz [Sat, 26 Jan 2008 19:13:08 +0000]
au1xxx-ide: use ide_init_port_hw()

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoau1xxx-ide: au_ide_probe() fixes
Bartlomiej Zolnierkiewicz [Sat, 26 Jan 2008 19:13:07 +0000]
au1xxx-ide: au_ide_probe() fixes

* hwif->hold is always set in au_ide_probe() (few lines earlier),
  no need to set it again

* hwif->{channel,select_data,config_data} should be always zero

* autotune PIO also if CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA is defined

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide: make remaining built-in only IDE host drivers modular (take 2)
Bartlomiej Zolnierkiewicz [Sat, 26 Jan 2008 19:13:07 +0000]
ide: make remaining built-in only IDE host drivers modular (take 2)

* Make remaining built-in only IDE host drivers modular, add ide-scan-pci.c
  file for probing PCI host drivers registered with IDE core (special case
  for built-in IDE and CONFIG_IDEPCI_PCIBUS_ORDER=y) and then take care of
  the ordering in which all IDE host drivers are probed when IDE is built-in
  during link time.

* Move probing of gayle, falconide, macide, q40ide and buddha (m68k arch
  specific) host drivers, before PCI ones (no PCI on m68k), ide-cris (cris
  arch specific), cmd640 (x86 arch specific) and pmac (ppc arch specific).

* Move probing of ide-cris (cris arch specific) host driver before cmd640
  (x86 arch specific).

* Move probing of mpc8xx (ppc specific) host driver before ide-pnp (depends
  on ISA and none of ppc platform that use mpc8xx supports ISA) and ide-h8300
  (h8300 arch specific).

* Add "probe_vlb" kernel parameter to cmd640 host driver and update
  Documentation/ide.txt accordingly.

* Make IDE_ARM config option visible so it can also be disabled if needed.

* Remove bogus comment from ide.c while at it.

v2:
* Fix two issues spotted by Sergei:
  - replace ENOMEM error value by ENOENT in ide-h8300 host driver
  - fix MODULE_PARM_DESC() in cmd640 host driver

Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide: fix host drivers depending on ide_generic to probe for interfaces (take 2)
Bartlomiej Zolnierkiewicz [Sat, 26 Jan 2008 19:13:06 +0000]
ide: fix host drivers depending on ide_generic to probe for interfaces (take 2)

* Add mpc8xx_ide_probe() to mpc8xx.c and call it from probe_for_hwifs().

* Convert ide_arm, ide-cris, ide-h8300, ide-pnp, buddha, falconide, gayle,
  macide, q40ide, cmd640 and mpc8xx host drivers to use ide_device_add().

  This removes dependency on ide_generic for these drivers so update
  ide/Kconfig accordingly.

v2:
* ide_arm build fix (s/ide_device_idx/ide_device_add/)
  (Thanks to Christoph Lameter <clameter@sgi.com> for reporting the problem).

Cc: Mikael Starvik <starvik@axis.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agocmd640: fix dependency on IDE_GENERIC
Bartlomiej Zolnierkiewicz [Sat, 26 Jan 2008 19:13:06 +0000]
cmd640: fix dependency on IDE_GENERIC

Make BLK_DEV_CMD640 select IDE_GENERIC.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide: move ide_arm_init() call from init_ide_data() to ide_init()
Bartlomiej Zolnierkiewicz [Sat, 26 Jan 2008 19:13:06 +0000]
ide: move ide_arm_init() call from init_ide_data() to ide_init()

* Remove ide_init_port_data() call from ide_arm_init() and move
  ide_arm_init() call from init_ide_data() to ide_init().

This patch is a preparation for the future changes (and as a side-effect
makes obsolete "idex=io[,ctl[,irq]]" kernel parameters work for ide_arm).

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide: drop 'initializing' argument from ide_register_hw()
Bartlomiej Zolnierkiewicz [Sat, 26 Jan 2008 19:13:06 +0000]
ide: drop 'initializing' argument from ide_register_hw()

* Rename init_hwif_data() to ide_init_port_data() and export it.

* For all users of ide_register_hw() with 'initializing' argument set
  hwif->present and hwif->hold are always zero so convert these host
  drivers to use ide_find_port()+ide_init_port_data()+ide_init_port_hw()
  instead (also no need for init_hwif_default() call since the setup
  done by it gets over-ridden by ide_init_port_hw() call).

* Drop 'initializing' argument from ide_register_hw().

Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide: add ide_init_port_hw() helper
Bartlomiej Zolnierkiewicz [Sat, 26 Jan 2008 19:13:05 +0000]
ide: add ide_init_port_hw() helper

* Add ide_init_port_hw() helper.

* rapide.c: convert rapide_locate_hwif() to rapide_setup_ports()
  and use ide_init_port_hw().

* ide_platform.c: convert plat_ide_locate_hwif() to plat_ide_setup_ports()
  and use ide_init_port_hw().

* sgiioc4.c: use ide_init_port_hw().

* pmac.c: add 'hw_regs_t *hw' argument to pmac_ide_setup_device(),
  setup 'hw' in pmac_ide_{macio,pci}_attach() and use ide_init_port_hw()
  in pmac_ide_setup_device().

This patch is a preparation for the future changes in the IDE probing code.

There should be no functionality changes caused by this patch.

Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Anton Vorontsov <avorontsov@ru.mvista.com>
Cc: Jeremy Higdon <jeremy@sgi.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agosgiioc4: always init hwif->io_ports
Bartlomiej Zolnierkiewicz [Sat, 26 Jan 2008 19:13:05 +0000]
sgiioc4: always init hwif->io_ports

'if (hwif->io_ports[IDE_DATA_OFFSET] != cmd_base)' is always true.

Cc: Jeremy Higdon <jeremy@sgi.com>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide: Fix build break caused by "ide: remove ideprobe_init()"
Olof Johansson [Sat, 26 Jan 2008 19:13:05 +0000]
ide: Fix build break caused by "ide: remove ideprobe_init()"

Fix build break of powerpc holly_defconfig:

In file included from arch/powerpc/platforms/embedded6xx/holly.c:24:
include/linux/ide.h:1206: error: 'CONFIG_IDE_MAX_HWIFS' undeclared here (not in a function)

There's no need to have a sized array in the prototype, might as well
turn it into a pointer.

It could probably be argued that large parts of the include file can be
covered under #ifdef CONFIG_IDE, but that's a larger undertaking.

Signed-off-by: Olof Johansson <olof@lixom.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide: remove ideprobe_init()
Bartlomiej Zolnierkiewicz [Sat, 26 Jan 2008 19:13:05 +0000]
ide: remove ideprobe_init()

* Rename ide_device_add() to ide_device_add_all() and make it accept
  'u8 idx[MAX_HWIFS]' instead of 'u8 idx[4]' as an argument.

* Add ide_device_add() wrapper for ide_device_add_all().

* Convert ide_generic_init() to use ide_device_add_all().

* Remove no longer needed ideprobe_init().

There should be no functionality changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide: add hwif->chipset fixup to ide_device_add()
Bartlomiej Zolnierkiewicz [Sat, 26 Jan 2008 19:13:04 +0000]
ide: add hwif->chipset fixup to ide_device_add()

Add hwif->chipset fixup identical to the one in ideprobe_init()
to ide_device_add().

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoswarm: set hwif->chipset
Bartlomiej Zolnierkiewicz [Sat, 26 Jan 2008 19:13:04 +0000]
swarm: set hwif->chipset

hwif->chipset should be set if the hwif is claimed by host driver.

Cc: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agorapide: set hwif->chipset
Bartlomiej Zolnierkiewicz [Sat, 26 Jan 2008 19:13:04 +0000]
rapide: set hwif->chipset

hwif->chipset should be set if the hwif is claimed by host driver.

Cc: Russell King <rmk@arm.linux.org.uk>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide: fix probing for hosts with serialized or IRQ sharing interfaces
Bartlomiej Zolnierkiewicz [Sat, 26 Jan 2008 19:13:04 +0000]
ide: fix probing for hosts with serialized or IRQ sharing interfaces

After hwif_register_devices() IDE devices are ready to be used so
the way in which ide_device_add() works currently is racy for hosts
with serialized / IRQ sharing interfaces.

Fix ide_device_add() by looping over interfaces for probe_hwif(),
hwif_init() and hwif_register_devices() operations.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide: kill probe_hwif_init()
Bartlomiej Zolnierkiewicz [Sat, 26 Jan 2008 19:13:04 +0000]
ide: kill probe_hwif_init()

There should be no functionality changes caused by this patch.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide: don't try to unregister interfaces if 'initializing' in ide_register_hw()
Bartlomiej Zolnierkiewicz [Sat, 26 Jan 2008 19:13:03 +0000]
ide: don't try to unregister interfaces if 'initializing' in ide_register_hw()

Host drivers using ide_register_hw() and 'initializing == 1':

* ide-pnp
  - depends on ISA

* ide_arm
  - ARM arch specific
  - initialized before all other host drivers

* ide-cris
  - CRIS arch specific => IDE_ARCH_OBSOLETE_INIT is not defined
  - broken

* ide-h8300
  - H8300 arch specific => IDE_ARCH_OBSOLETE_INIT is not defined, no PCI

* buddha/q40/gayle/macide/falconide
  - M68K arch specific => IDE_ARCH_OBSOLETE_INIT is not defined, no PCI

Since the only host drivers which probe interfaces before the above ones are:

* ali14xx/dtc2278/ht6560b/qd65xx/umc8672
  - depend on ISA
  - require IDE_ARCH_OBSOLETE_INIT=y to work

* PCI ones
  - depend on PCI

don't try to unregister interfaces if 'initializing == 1' in ide_register_hw()
(it is possible that built-in host drivers will claim all IDE interfaces but
later ide-pnp host driver will try to unregister them - this change fixes it).

Also skip hwif->hold check if 'initializing == 1' since it is set only by:

* pmac
  - PPC && PMAC specific => no ISA

* au1xxx-ide
  - MIPS && SOC_AU1200 specific => no ISA

and use ide_find_port() helper to find free ide_hwifs[] slot.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide: merge ->fixup and ->quirkproc methods
Bartlomiej Zolnierkiewicz [Sat, 26 Jan 2008 19:13:03 +0000]
ide: merge ->fixup and ->quirkproc methods

* Assign drive->quirk_list in ->quirkproc implementations:
  - hpt366.c::hpt3xx_quirkproc()
  - pdc202xx_new.c::pdcnew_quirkproc()
  - pdc202xx_old.c::pdc202xx_quirkproc()

* Make ->quirkproc void.

* Move calling ->quirkproc from do_identify() to probe_hwif().

* Convert it821x_fixups() to it821x_quirkproc() in it821x.c.

* Convert siimage_fixup() to sil_quirkproc() in siimage.c, also remove
  no longer needed drive->present check from is_dev_seagate_sata().

* Convert ide_undecoded_slave() to accept 'drive' instead of 'hwif'
  as an argument.  Then convert ide_register_hw() to accept 'quirkproc'
  argument instead of 'fixup' one.

* Remove no longer needed ->fixup method.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide: dump taskfile HOB registers in ide_tf_load() (if DEBUG is defined)
Bartlomiej Zolnierkiewicz [Sat, 26 Jan 2008 19:13:03 +0000]
ide: dump taskfile HOB registers in ide_tf_load() (if DEBUG is defined)

* Dump taskfile HOB registers in ide_tf_load() (if DEBUG is defined).

* Remove no longer needed DEBUG code from __ide_do_rw_disk().

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide: merge ->dma_host_{on,off} methods into ->dma_host_set method
Bartlomiej Zolnierkiewicz [Sat, 26 Jan 2008 19:13:03 +0000]
ide: merge ->dma_host_{on,off} methods into ->dma_host_set method

Merge ->dma_host_{on,off} methods into ->dma_host_set method
which takes 'int on' argument.

There should be no functionality changes caused by this patch.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide: move drive->using_dma check to callers of ->dma_host_on method
Bartlomiej Zolnierkiewicz [Sat, 26 Jan 2008 19:13:02 +0000]
ide: move drive->using_dma check to callers of ->dma_host_on method

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoatiixp: remove ->dma_host_on and ->dma_host_off methods
Bartlomiej Zolnierkiewicz [Sat, 26 Jan 2008 19:13:02 +0000]
atiixp: remove ->dma_host_on and ->dma_host_off methods

* Enable/disable UDMA in atiixp_set_dma_mode().

* Remove no longer needed atiixp_dma_host_{on,off}() and save_mdma_mode[].

* Bump driver version.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide-cris: fix DMA methods
Bartlomiej Zolnierkiewicz [Sat, 26 Jan 2008 19:13:01 +0000]
ide-cris: fix DMA methods

* Rename cris_dma_{on,off}() to cris_dma_host_{on,off}().

* Remove no longer needed ->dma_off_quietly
  (IDE core has the needed code now).

* Make cris_dma_host_on() void.

I left fixing ide-cris after "kill dma_on/dma_off_quietly() methods"
patch because:

* Currently this driver is broken: cris_dma_on() (returns 'int')
  is assigned to hwif->dma_host_on (returns 'void') so the driver
  won't build.

* ->ide_dma_on method was missing so the driver OOPS-es on attempt
  to enable DMA.

* drive->using_dma was never set/cleared so DMA wouldn't be used anyway.

Unfortunately it seems that ide-cris stays broken even after this patch:

* V10: <asm/arch-v10/ide.h> needs fixing
  - ide_init_default_hwifs() should be removed
    (IDE core no longer uses it)
  - same for ide_init_hwif_ports() and ide_default_{irq,io_base}()
    (they shouldn't be needed for ide-cris host driver)

* V32: I'm unable to find a place which defines ETRAX_ARCH_V32

but I'm leaving fixing this to CRIS gurus. :)

Cc: Mikael Starvik <starvik@axis.com>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide: remove ->ide_dma_on and ->dma_off_quietly methods from ide_hwif_t
Bartlomiej Zolnierkiewicz [Sat, 26 Jan 2008 19:13:01 +0000]
ide: remove ->ide_dma_on and ->dma_off_quietly methods from ide_hwif_t

* Make ide_dma_off_quietly() and __ide_dma_on() always available.

* Drop "__" prefix from __ide_dma_on().

* Check for presence of ->dma_host_on instead of ->ide_dma_on.

* Convert all users of ->ide_dma_on and ->dma_off_quietly methods
  to use ide_dma_on() and ide_dma_off_quietly() instead.

* Remove no longer needed ->ide_dma_on and ->dma_off_quietly methods
  from ide_hwif_t.

* Make ide_dma_on() void.

There should be no functionality changes caused by this patch.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoau1xxx-ide: add ide_toggle_bounce() calls
Bartlomiej Zolnierkiewicz [Sat, 26 Jan 2008 19:13:01 +0000]
au1xxx-ide: add ide_toggle_bounce() calls

Add ide_toggle_bounce() call to ->ide_dma_on/->dma_off_quietly
methods so they match generic __ide_dma_on()/ide_dma_off_quietly().

Since there is no PCI device there should be no functionality
changes caused by this patch.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoicside: add ide_toggle_bounce() calls
Bartlomiej Zolnierkiewicz [Sat, 26 Jan 2008 19:13:00 +0000]
icside: add ide_toggle_bounce() calls

Add ide_toggle_bounce() call to ->ide_dma_on/->dma_off_quietly
methods so they match generic __ide_dma_on()/ide_dma_off_quietly().

Since there is no PCI device there should be no functionality
changes caused by this patch.

Cc: Russell King <rmk@arm.linux.org.uk>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agosgiioc4: add ide_toggle_bounce() calls
Bartlomiej Zolnierkiewicz [Sat, 26 Jan 2008 19:13:00 +0000]
sgiioc4: add ide_toggle_bounce() calls

Add ide_toggle_bounce() call to ->ide_dma_on/->dma_off_quietly
methods so they match generic __ide_dma_on()/ide_dma_off_quietly().

Tested on Altix by Jeremy.

Acked-by: Jeremy Higdon <jeremy@sgi.com>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agocy82c693: add ->set_dma_mode method
Bartlomiej Zolnierkiewicz [Sat, 26 Jan 2008 19:13:00 +0000]
cy82c693: add ->set_dma_mode method

* Fix SWDMA/MWDMA masks in cy82c693_chipset.

* Add IDE_HFLAG_CY82C693 host flag and use it in ide_tune_dma() to
  check whether the DMA should be enabled even if ide_max_dma_mode()
  fails.

* Convert cy82c693_dma_enable() to become cy82c693_set_dma_mode()
  and remove no longer needed cy82c693_ide_dma_on().  Then set
  IDE_HFLAG_CY82C693 instead of IDE_HFLAG_TRUST_BIOS_FOR_DMA in
  cy82c693_chipset.

* Bump driver version.

As a result of this patch cy82c693 driver will configure and use DMA on
all SWDMA0-2 and MWDMA0-2 capable ATA devices instead of relying on BIOS.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agocy82c693: correct DMA modes clipping
Bartlomiej Zolnierkiewicz [Sat, 26 Jan 2008 19:13:00 +0000]
cy82c693: correct DMA modes clipping

* Mask device DMA masks by ATA_{S,M}WDMA2 in cy82c693_ide_dma_on().

* Remove clipping of DMA modes by id->tDMA in cy82c693_dma_enable():
  - id->tDMA may not be defined on newer devices
  - id->vendor6/id->tDMA word is in LE endianness
    (cy82c693 seems to be Alpha specific though)

* Bump driver version.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide: (hopefully) fix VDMA for CS5520
Bartlomiej Zolnierkiewicz [Sat, 26 Jan 2008 19:12:59 +0000]
ide: (hopefully) fix VDMA for CS5520

* Set the correct hwif->dma_base for the second channel in
  ide_get_or_set_dma_base().

* Remove DMA enable code from cs5520_set_pio_mode(), this can
  be handled by the generic ->dma_host_on method now.

* Add VDMA check to ide_config_drive_speed().

* drive->using_dma was never enabled since cs5520 host driver's
  ->ide_dma_on method overrided the generic ->ide_dma_on (so
  __ide_dma_on() was never called, drive->using_dma was never set
  and VDMA was never used since it depends on drive->using_dma).

  Fix it by using ->dma_host_on method instead of ->ide_dma_on
  (also add matching ->dma_host_off method).

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide-disk: add idedisk_set_doorlock() helper
Bartlomiej Zolnierkiewicz [Sat, 26 Jan 2008 19:12:59 +0000]
ide-disk: add idedisk_set_doorlock() helper

There should be no functionality changes caused by this patch.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoserverworks: cleanup ->set_dma_mode method
Bartlomiej Zolnierkiewicz [Sat, 26 Jan 2008 19:12:59 +0000]
serverworks: cleanup ->set_dma_mode method

IDE core guarantees that ->set_dma_mode will be called only
for DMA modes set in SWDMA/MWDMA/UDMA masks.

There should be no functionality changes caused by this patch.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agosl82c105: remove no longer needed ->selectproc method
Bartlomiej Zolnierkiewicz [Sat, 26 Jan 2008 19:12:59 +0000]
sl82c105: remove no longer needed ->selectproc method

* Program register 0x40 in sl82c105_resetproc().

* Remove no longer needed sl82c105_selectproc() and pci_set_drvdata() calls.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agosl82c105: program DMA/PIO timings in ->dma_start/->ide_dma_end
Bartlomiej Zolnierkiewicz [Sat, 26 Jan 2008 19:12:58 +0000]
sl82c105: program DMA/PIO timings in ->dma_start/->ide_dma_end

* Program DMA timings in sl82c105_dma_start() (->dma_start method)
  before starting DMA transfer.

* Add sl82c105_dma_end() (->ide_dma_end method) to switch back to
  PIO timings when DMA transfer is complete.

* In sl82c105_set_pio_mode() program timings regardless of ->using_dma
  setting and in sl82c105_set_dma_mode() only cache the new timings.

* Remove no longer needed sl82c105_{ide_dma_on,off_quietly}().

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years ago[S390] replace lock_cpu_hotplug with get_online_cpus
Martin Schwidefsky [Sat, 26 Jan 2008 13:11:31 +0000]
[S390] replace lock_cpu_hotplug with get_online_cpus

Git commit 86ef5c9a8edd78e6bf92879f32329d89b2d55b5a forgot a few
lock_cpu_hotplug/unlock_cpu_hotplug pairs in arch/s390/kernel/smp.c

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

11 years ago[S390] usage of s390dbf: shrink number of debug areas to use.
Peter Tiedemann [Sat, 26 Jan 2008 13:11:30 +0000]
[S390] usage of s390dbf: shrink number of debug areas to use.

Signed-off-by: Peter Tiedemann <ptiedem@de.ibm.com>

11 years ago[S390] constify function pointer tables.
Jan Engelhardt [Sat, 26 Jan 2008 13:11:29 +0000]
[S390] constify function pointer tables.

Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

11 years ago[S390] do local_irq_restore while spinning in spin_lock_irqsave.
Hisashi Hifumi [Sat, 26 Jan 2008 13:11:28 +0000]
[S390] do local_irq_restore while spinning in spin_lock_irqsave.

In s390's spin_lock_irqsave, interrupts remain disabled while
spinning. In other architectures like x86 and powerpc, interrupts are
re-enabled while spinning if IRQ is not masked before spin_lock_irqsave
is called.

The following patch re-enables interrupts through local_irq_restore
while spinning for a lock acquisition.
This can improve system response.

[heiko.carstens@de.ibm.com: removed saving of pc]

Signed-off-by: Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

11 years ago[S390] add smp_call_function_mask
Carsten Otte [Sat, 26 Jan 2008 13:11:27 +0000]
[S390] add smp_call_function_mask

This patch adds the s390 variant for smp_call_function_mask(). The
implementation is pretty straight forward using the wrapper
__smp_call_function_map() which already takes a cpumask_t argument.

Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

11 years ago[S390] dasd: fix loop in request expiration handling
Stefan Haberland [Sat, 26 Jan 2008 13:11:26 +0000]
[S390] dasd: fix loop in request expiration handling

Add time to the 'expires' value to avoid a loop caused by the cqr
termination function

Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

11 years ago[S390] Unused field / extern declaration in processor.h
Martin Schwidefsky [Sat, 26 Jan 2008 13:11:25 +0000]
[S390] Unused field / extern declaration in processor.h

Remove extern declaration of non-existent last_task_used_math and
remove unused field error_code from the thread_struct.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

11 years ago[S390] Remove TOPDIR from Makefile
WANG Cong [Sat, 26 Jan 2008 13:11:24 +0000]
[S390] Remove TOPDIR from Makefile

This patch removes TOPDIR from arch/s390/kernel/Makefile.

Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

11 years ago[S390] dasd: add hyper PAV support to DASD device driver, part 1
Stefan Weinhuber [Sat, 26 Jan 2008 13:11:23 +0000]
[S390] dasd: add hyper PAV support to DASD device driver, part 1

Parallel access volumes (PAV) is a storage server feature, that allows
to start multiple channel programs on the same DASD in parallel. It
defines alias devices which can be used as alternative paths to the
same disk. With the old base PAV support we only needed rudimentary
functionality in the DASD device driver. As the mapping between base
and alias devices was static, we just had to export an identifier
(uid) and could leave the combining of devices to external layers
like a device mapper multipath.
Now hyper PAV removes the requirement to dedicate alias devices to
specific base devices. Instead each alias devices can be combined with
multiple base device on a per request basis. This requires full
support by the DASD device driver as now each channel program itself
has to identify the target base device.
The changes to the dasd device driver and the ECKD discipline are:
- Separate subchannel device representation (dasd_device) from block
  device representation (dasd_block). Only base devices are block
  devices.
- Gather information about base and alias devices and possible
  combinations.
- For each request decide which dasd_device should be used (base or
  alias) and build specific channel program.
- Support summary unit checks, which allow the storage server to
  upgrade / downgrade between base and hyper PAV at runtime (support
  is mandatory).

Signed-off-by: Stefan Weinhuber <wein@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

11 years ago[S390] single-step cleanup
Roland McGrath [Sat, 26 Jan 2008 13:11:22 +0000]
[S390] single-step cleanup

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

11 years ago[S390] Move NOTES and BUG_TABLE.
Martin Schwidefsky [Sat, 26 Jan 2008 13:11:21 +0000]
[S390] Move NOTES and BUG_TABLE.

Move the NOTES and BUG_TABLE section in the linker script to the
read-only sections right after the text section.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

11 years ago[S390] drivers/s390/: Spelling fixes
Joe Perches [Sat, 26 Jan 2008 13:11:20 +0000]
[S390] drivers/s390/: Spelling fixes

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

11 years ago[S390] include/asm-s390/: Spelling fixes
Joe Perches [Sat, 26 Jan 2008 13:11:19 +0000]
[S390] include/asm-s390/: Spelling fixes

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

11 years ago[S390] arch/s390/: Spelling fixes
Joe Perches [Sat, 26 Jan 2008 13:11:18 +0000]
[S390] arch/s390/: Spelling fixes

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>