12 years ago[AF_RXRPC]: constify function pointer tables
Jan Engelhardt [Thu, 31 Jan 2008 02:55:45 +0000]
[AF_RXRPC]: constify function pointer tables

Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[BNX2]: Update version to 1.7.3.
Michael Chan [Wed, 30 Jan 2008 05:38:52 +0000]
[BNX2]: Update version to 1.7.3.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[BNX2]: Update firmware.
Michael Chan [Wed, 30 Jan 2008 05:38:06 +0000]
[BNX2]: Update firmware.

Update firmware to support programmable flow control.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[BNX2]: Fine-tune flow control on 5709.
Michael Chan [Wed, 30 Jan 2008 05:37:17 +0000]
[BNX2]: Fine-tune flow control on 5709.

Make use of the programmable high/low water marks in 5709 for
802.3 flow control.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[BNX2]: Remove CTX_WR macro.
Michael Chan [Wed, 30 Jan 2008 05:35:40 +0000]
[BNX2]: Remove CTX_WR macro.

The CTX_WR macro is unnecessary and obfuscates the code.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[BNX2]: Remove REG_WR_IND/REG_RD_IND macros.
Michael Chan [Wed, 30 Jan 2008 05:35:05 +0000]
[BNX2]: Remove REG_WR_IND/REG_RD_IND macros.

The REG_WR_IND/REG_RD_IND macros are unnecessary and obfuscate the
code.  Many callers to these macros read and write shared memory from
the bp->shmem_base, so we add 2 similar functions that automatically
add the shared memory base.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[BNX2]: Refine tx coalescing setup.
Michael Chan [Wed, 30 Jan 2008 05:34:08 +0000]
[BNX2]: Refine tx coalescing setup.

Make the tx coalescing setup code independent of the MSIX vector.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[BNX2]: Fix 5706 serdes link down bug.
Michael Chan [Wed, 30 Jan 2008 05:33:03 +0000]
[BNX2]: Fix 5706 serdes link down bug.

1. Correct the MII expansion serdes control register definition.
2. Check an additional RUDI_INVALID bit when determining 5706S link.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[BLUETOOTH]: Add conn add/del workqueues to avoid connection fail.
Dave Young [Wed, 30 Jan 2008 05:14:08 +0000]
[BLUETOOTH]: Add conn add/del workqueues to avoid connection fail.

The bluetooth hci_conn sysfs add/del executed in the default
workqueue.  If the del_conn is executed after the new add_conn with
same target, add_conn will failed with warning of "same kobject name".

Here add btaddconn & btdelconn workqueues, flush the btdelconn
workqueue in the add_conn function to avoid the issue.

Signed-off-by: Dave Young <hidave.darkstar@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[IPCOMP]: Fetch nexthdr before ipch is destroyed
Herbert Xu [Wed, 30 Jan 2008 05:11:46 +0000]
[IPCOMP]: Fetch nexthdr before ipch is destroyed

When I moved the nexthdr setting out of IPComp I accidently moved
the reading of ipch->nexthdr after the decompression.  Unfortunately
this means that we'd be reading from a stale ipch pointer which
doesn't work very well.

This patch moves the reading up so that we get the correct nexthdr
value.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[IPV4] fib_trie: apply fixes from fib_hash
Julian Anastasov [Tue, 29 Jan 2008 05:18:06 +0000]
[IPV4] fib_trie: apply fixes from fib_hash

Update fib_trie with some fib_hash fixes:
- check for duplicate alternative routes for prefix+tos+priority when
replacing route
- properly insert by matching tos together with priority
- fix alias walking to use list_for_each_entry_continue for insertion
and deletion when fa_head is not NULL
- copy state from fa to new_fa on replace (not a problem for now)
- additionally, avoid replacement without error if new route is same,
as Joonwoo Park suggests.

Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[IPV4] fib: fix route replacement, fib_info is shared
Julian Anastasov [Tue, 29 Jan 2008 05:14:10 +0000]
[IPV4] fib: fix route replacement, fib_info is shared

fib_info can be shared by many route prefixes but we don't want
duplicate alternative routes for a prefix+tos+priority. Last change
was not correct to check fib_treeref because it accounts usage from
other prefixes. Additionally, avoid replacement without error if new
route is same, as Joonwoo Park suggests.

Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[SCTP]: Fix miss of report unrecognized HMAC Algorithm parameter
Wei Yongjun [Tue, 29 Jan 2008 04:58:46 +0000]
[SCTP]: Fix miss of report unrecognized HMAC Algorithm parameter

This patch fix miss of check for report unrecognized HMAC Algorithm
parameter.  When AUTH is disabled, goto fall through path to report
unrecognized parameter, else, just break

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[INET_DIAG]: Fix inet_diag_lock_handler error path.
Arnaldo Carvalho de Melo [Tue, 29 Jan 2008 04:52:12 +0000]
[INET_DIAG]: Fix inet_diag_lock_handler error path.

Fixes: http://bugzilla.kernel.org/show_bug.cgi?id=9825

The inet_diag_lock_handler function uses ERR_PTR to encode errors but
its callers were testing against NULL.

This only happens when the only inet_diag modular user, DCCP, is not
built into the kernel or available as a module.

Also there was a problem with not dropping the mutex lock when a handler
was not found, also fixed in this patch.

This caused an OOPS and ss would then hang on subsequent calls, as
&inet_diag_table_mutex was being left locked.

Thanks to spike at ml.yaroslavl.ru for report it after trying 'ss -d'
on a kernel that doesn't have DCCP available.

This bug was introduced in cset
d523a328fb0271e1a763e985a21f2488fd816e7e ("Fix inet_diag dead-lock
regression"), after 2.6.24-rc3, so just 2.6.24 seems to be affected.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[AUDIT]: Increase skb->truesize in audit_expand
Herbert Xu [Tue, 29 Jan 2008 04:47:09 +0000]
[AUDIT]: Increase skb->truesize in audit_expand

The recent UDP patch exposed this bug in the audit code.  It
was calling pskb_expand_head without increasing skb->truesize.
The caller of pskb_expand_head needs to do so because that function
is designed to be called in places where truesize is already fixed
and therefore it doesn't update its value.

Because the audit system is using it in a place where the truesize
has not yet been fixed, it needs to update its value manually.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[INET]: Prevent out-of-sync truesize on ip_fragment slow path
Herbert Xu [Tue, 29 Jan 2008 04:45:20 +0000]
[INET]: Prevent out-of-sync truesize on ip_fragment slow path

When ip_fragment has to hit the slow path the value of skb->truesize
may go out of sync because we would have updated it without changing
the packet length.  This violates the constraints on truesize.

This patch postpones the update of skb->truesize to prevent this.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[AX25]: Kill ax25_bind() user triggable printk.
maximilian attems [Tue, 29 Jan 2008 04:44:11 +0000]
[AX25]: Kill ax25_bind() user triggable printk.

on the last run overlooked that sfuzz triggable message.
move the message to the corresponding comment.

Signed-off-by: maximilian attems <max@stro.at>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[AX25]: Beautify x25_init() version printk.
maximilian attems [Tue, 29 Jan 2008 04:43:16 +0000]
[AX25]: Beautify x25_init() version printk.

kill ref to old version and dup Linux.

Signed-off-by: maximilian attems <max@stro.at>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[NET] 9p: kill dead static inline buf_put_string
Ilpo Järvinen [Tue, 29 Jan 2008 04:28:26 +0000]
[NET] 9p: kill dead static inline buf_put_string

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Acked-by: Eric Van Hensbergen <ericvh@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[SELinux]: Fix double free in selinux_netlbl_sock_setsid()
Paul Moore [Tue, 29 Jan 2008 03:49:00 +0000]
[SELinux]: Fix double free in selinux_netlbl_sock_setsid()

As pointed out by Adrian Bunk, commit
45c950e0f839fded922ebc0bfd59b1081cc71b70 ("fix memory leak in netlabel
code") caused a double-free when security_netlbl_sid_to_secattr()
fails.  This patch fixes this by removing the netlbl_secattr_destroy()
call from that function since we are already releasing the secattr
memory in selinux_netlbl_sock_setsid().

Signed-off-by: Paul Moore <paul.moore@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[IPSEC]: Add support for combined mode algorithms
Herbert Xu [Tue, 29 Jan 2008 03:37:29 +0000]
[IPSEC]: Add support for combined mode algorithms

This patch adds support for combined mode algorithms with GCM being
the first algorithm supported.

Combined mode algorithms can be added through the xfrm_user interface
using the new algorithm payload type XFRMA_ALG_AEAD.  Each algorithms
is identified by its name and the ICV length.

For the purposes of matching algorithms in xfrm_tmpl structures,
combined mode algorithms occupy the same name space as encryption
algorithms.  This is in line with how they are negotiated using IKE.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[IPSEC]: Allow async algorithms
Herbert Xu [Tue, 29 Jan 2008 03:35:49 +0000]
[IPSEC]: Allow async algorithms

Now that ESP uses authenc we can turn on the support for async
algorithms in IPsec.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[IPSEC]: Use crypto_aead and authenc in ESP
Herbert Xu [Tue, 29 Jan 2008 03:35:05 +0000]
[IPSEC]: Use crypto_aead and authenc in ESP

This patch converts ESP to use the crypto_aead interface and in particular
the authenc algorithm.  This lays the foundations for future support of
combined mode algorithms.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years agoAdd new driver 'rndis_wlan' for wireless RNDIS devices.
Jussi Kivilinna [Fri, 25 Jan 2008 22:51:51 +0000]
Add new driver 'rndis_wlan' for wireless RNDIS devices.

New driver for wireless RNDIS devices. So far only known chip that uses
wireless RNDIS is Broadcom 4320. Driver detects all RNDIS devices that
have RNDIS wireless physical medium. At least following devices are
detected:

  Buffalo WLI-U2-KG125S
  U.S. Robotics USR5421
  Belkin F5D7051
  Linksys WUSB54GSv2
  Linksys WUSB54GSC
  Asus WL169gE
  Eminent EM4045
  BT Voyager 1055
  Linksys WUSB54GSv1
  U.S. Robotics USR5420
  BUFFALO WLI-USB-G54

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years agoMove usbnet.h and rndis_host.h to include/linux/usb
Jussi Kivilinna [Fri, 25 Jan 2008 22:51:45 +0000]
Move usbnet.h and rndis_host.h to include/linux/usb

Move headers usbnet.h and rndis_host.h to include/linux/usb and fix includes
for drivers/net/usb modules. Headers are moved because rndis_wlan will be
outside drivers/net/usb in drivers/net/wireless and yet need these headers.

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years agorndis_host: Add RNDIS physical medium checking into generic_rndis_bind()
Jussi Kivilinna [Sun, 27 Jan 2008 21:34:33 +0000]
rndis_host: Add RNDIS physical medium checking into generic_rndis_bind()

Add RNDIS physical medium checking into generic_rndis_bind() and also make
rndis_host to be only bind on every medium except wireless.

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years agorndis_host: Add link_change function pointer to 'struct rndis_data'.
Jussi Kivilinna [Fri, 25 Jan 2008 22:51:34 +0000]
rndis_host: Add link_change function pointer to 'struct rndis_data'.

Callback to signal link state changes from minidriver to
'subminidrivers'.

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years agorndis_host: Add early_init function pointer to 'struct rndis_data'.
Jussi Kivilinna [Fri, 25 Jan 2008 22:51:28 +0000]
rndis_host: Add early_init function pointer to 'struct rndis_data'.

Function pointer is for 'subminidrivers' that need to do work on device
right after minidriver has initialized hardware.

For example, rndis_wlan setting device specific configuration parameters
with OID_GEN_RNDIS_CONFIG_PARAMETER right after rndis_host has
initialized hardware with RNDIS_INIT.

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years agousbnet: add driver_priv pointer to 'struct usbnet'
Jussi Kivilinna [Fri, 25 Jan 2008 22:51:23 +0000]
usbnet: add driver_priv pointer to 'struct usbnet'

Add a private data pointer to usbnet for rndis_wlan module to use.

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years agorndis_host: export functions
Jussi Kivilinna [Fri, 25 Jan 2008 22:51:17 +0000]
rndis_host: export functions

Export rndis_host functions and also rename rndis_bind() to
generic_rndis_bind() for modules using rndis_host as base.

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years agorndis_host: Split up rndis_host.c
Jussi Kivilinna [Fri, 25 Jan 2008 22:51:12 +0000]
rndis_host: Split up rndis_host.c

Split up rndis_host.c into rndis_host.h and rndis_base.c. This is done so
that rndis_wlan can reuse common parts with rndis_host.

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years agousbnet: Use wlan device name for RNDIS wireless devices
Jussi Kivilinna [Fri, 25 Jan 2008 22:51:06 +0000]
usbnet: Use wlan device name for RNDIS wireless devices

Use wlan device name for RNDIS wireless devices.

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: Bjorge Dijkstra <bjd@jooz.net>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years agorndis_host: Fix rndis packet filter flags.
Jussi Kivilinna [Fri, 25 Jan 2008 22:51:01 +0000]
rndis_host: Fix rndis packet filter flags.

RNDIS packet filter flags are not exactly the same as CDC flags
so we cannot reuse them.

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: Bjorge Dijkstra <bjd@jooz.net>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years agorndis_host: Halt device if rndis_bind fails.
Jussi Kivilinna [Fri, 25 Jan 2008 22:50:55 +0000]
rndis_host: Halt device if rndis_bind fails.

When bind fails after device was initialized, shutdown device properly
by sending RNDIS_MSG_HALT.

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: Bjorge Dijkstra <bjd@jooz.net>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years agorndis_host: Use 1KB buffer in rndis_unbind
Jussi Kivilinna [Fri, 25 Jan 2008 22:50:49 +0000]
rndis_host: Use 1KB buffer in rndis_unbind

rndis_command requires the caller to pass in a buffer of at least 1KB.

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: Bjorge Dijkstra <bjd@jooz.net>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years agocdc_ether: Hardwire CDC descriptors when missing
Bjorge Dijkstra [Fri, 25 Jan 2008 22:50:44 +0000]
cdc_ether: Hardwire CDC descriptors when missing

Just as ActiveSync devices, some regular RNDIS devices also lack
the CDC descriptors (e.g. devices based on BCM4320 WLAN chip).
This patch hardwires the CDC descriptors for all RNDIS style devices
when they are missing.

Signed-off-by: Bjorge Dijkstra <bjd@jooz.net>
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years agorndis_host: Fix sparse warning
Bjorge Dijkstra [Fri, 25 Jan 2008 22:50:38 +0000]
rndis_host: Fix sparse warning

rndis_unbind and usbnet_cdc_unbind don't return anything.

Signed-off-by: Bjorge Dijkstra <bjd@jooz.net>
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years agoAdd another Prism2 card to hostap
Marcin Juszkiewicz [Tue, 29 Jan 2008 08:42:53 +0000]
Add another Prism2 card to hostap

Card reported by Ångström user:
http://bugs.openembedded.net/show_bug.cgi?id=3236

Socket 1:
   product info: "Wireless LAN", "11Mbps PC Card", "Version 01.02", ""
   manfid: 0x0156, 0x0002
   function: 6 (network)

Signed-off-by: Marcin Juszkiewicz <openembedded@haerwu.biz>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years agohostap_80211.h: remove duplicate prototype
Michal Piotrowski [Mon, 28 Jan 2008 22:12:32 +0000]
hostap_80211.h: remove duplicate prototype

There were two identical prototypes for hostap_80211_rx() in
drivers/net/wireless/hostap/hostap_80211.h.

This patch fixes kernel Bugzilla #8930.

Reported by Christoph Burger-Scheidlin.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years agowireless: iwlwifi3945/4965 - fix incorrect counting of memory
Cyrill Gorcunov [Sat, 26 Jan 2008 16:09:36 +0000]
wireless: iwlwifi3945/4965 - fix incorrect counting of memory

This patch does fix incorrect counting of memory allocated by kmalloc.
It seems that could lead to allocated memory overrun and corrupt
nearlaid memory area.

Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years agolibertas: fix interrupt while removing driver
Holger Schurig [Fri, 25 Jan 2008 13:15:48 +0000]
libertas: fix interrupt while removing driver

Previously I've got an interrupt while removing the driver.

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years agolibertas: fix memory alignment problems on the blackfin
Ihar Hrachyshka [Fri, 25 Jan 2008 13:15:00 +0000]
libertas: fix memory alignment problems on the blackfin

Fixing unaligned memory access on the blackfin architecture (maybe on the
ARM also).

Signed-off-by: Ihar Hrachyshka <ihar.hrachyshka@promwad.com>
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years agoiwlwifi: correct math in elapsed_jiffies
Eric Sandeen [Thu, 24 Jan 2008 20:47:39 +0000]
iwlwifi: correct math in elapsed_jiffies

w/o the first change: if end == start you get MAX_JIFFY_OFFSET which
isn't what you want...

For the latter I think to be technically correct you need the +1 to
account for the jiffy between MAX_JIFFY_OFFSET and 0

(hmm w/ the 2nd change the first isn't strictly needed... ah well)

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years agorfkill: add the WiMAX radio type
Iñaky Pérez-González [Wed, 23 Jan 2008 21:40:27 +0000]
rfkill: add the WiMAX radio type

Teach rfkill about wimax radios.

Had to define a KEY_WIMAX as a 'key for disabling only wimax radios',
as other radio technologies have. This makes sense as hardware has
specific keys for disabling specific radios.

The RFKILL enabling part is, otherwise, a copy and paste of any other
radio technology.

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years agob43: Drop packets that we are not able to encrypt
Michael Buesch [Wed, 23 Jan 2008 20:44:15 +0000]
b43: Drop packets that we are not able to encrypt

We must not transmit packets we're not able to encrypt.

This fixes a bug where in a tiny timeframe after machine resume
packets can get sent unencrypted and might leak information.

This also fixes three small resource leakages I spotted while fixing
the security problem. Properly deallocate the DMA slots in any DMA
allocation error path.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years agob43: Fix suspend/resume
Michael Buesch [Wed, 23 Jan 2008 20:10:56 +0000]
b43: Fix suspend/resume

This fixes suspend/resume.

We must not overwrite the MAC addresses on resume. Otherwise
the card won't ACK any packets anymore.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years agoiwlwifi: Fix uCode error on association
Gregory Greenman [Wed, 23 Jan 2008 18:15:21 +0000]
iwlwifi: Fix uCode error on association

The problem is that priv->assoc_id is set when assoc. resp frame is
received. But, when it is set, LQ cmd is still not sent to the uCode, it is
done from bg_post_assoc, which is called through a workqueue.

On the other hand, when a tx arrives at the moment when this flag is set,
but LQ is still not sent, the if condition in tx_skb will not hold and
the frame will not be dropped.  Thus, it will be sent through
which is still not in the sta table in the uCoded.

Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years agoiwlwifi: do not schedule tasklet when rcv unused irq
Joonwoo Park [Wed, 23 Jan 2008 18:15:20 +0000]
iwlwifi: do not schedule tasklet when rcv unused irq

The nic controller's scheduler interrupt (CSR_INT_BIT_SCD) indicates
to the driver that scheduler finished to transmit the frame/frames.
This bit is not used and the tasklet should thus not be scheduled upon
its receipt.

Signed-off-by: Joonwoo Park <joonwpark81@gmail.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years agoiwlwifi: cleanup usage of inline functions
Reinette Chatre [Wed, 23 Jan 2008 18:15:19 +0000]
iwlwifi: cleanup usage of inline functions

Be consistent when using inline functions. If the function only used
once we move it to where it is used - no need for externs.

Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years agoiwlwifi: initialize geo/channel information during probe
Reinette Chatre [Wed, 23 Jan 2008 18:15:18 +0000]
iwlwifi: initialize geo/channel information during probe

The geo/channel information is obtained from the EEPROM, which is read
during probe. We can thus set up channel information at this time. This
helps us to support ioctl commands that rely on this before the interface
is brought up.

Clearly matches _init_channel_map with _free_channel_map and _init_geos
with _free_geos to ensure functions calling these routines can also call
their cleanup routines.

Fixes a few bugs:
- if channel information is not available when ioctl commands are
  issued then we get a NULL pointer oops. Having channel information
  set up during probe we can deal with ioctl commands without requiring
  interface to be brought up.
  This fixes bug: http://www.bughost.org/bugzilla/show_bug.cgi?id=1552
- Fix potential problem if user triggers probe/remove/probe sequence. The
  value of priv->channel_count was used to determine if channel map is
  set up. This value was never reset when channel map was removed.
- Fix memory leak: priv->modes need to be freed when device removed.

Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years agoiwl4965: fix return code indicating one interface is supported
Reinette Chatre [Wed, 23 Jan 2008 18:15:17 +0000]
iwl4965: fix return code indicating one interface is supported

This is a fix to patch "iwlwifi: fix iwl_mac_add_interface handler".
In that patch the return code was corrected for iwl3945, but not for
iwl4965.

Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Cc: Tomas Carnecky <tom@dbservice.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years agoiwlwifi: Fix an invalid bitmask test in iwl3945 and iwl4965
Maarten Lankhorst [Wed, 23 Jan 2008 18:15:16 +0000]
iwlwifi: Fix an invalid bitmask test in iwl3945 and iwl4965

Signed-off-by: Maarten Lankhorst <m.b.lankhorst@gmail.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years agortl8180_dev.c: add support for 1799:700f
Adrian Bassett [Wed, 23 Jan 2008 16:38:33 +0000]
rtl8180_dev.c: add support for 1799:700f

I have been using the rtl8180 driver via the git kernel route for a while now and would like to suggest that the following local ammendment is included in the development tree in order to support the PCI device 1799:700f.

This device is found on the 'Belkin Wireless G Desktop Card' product, model 'F5D7000uk'.  From memory, the chip on the card is inscribed RTL8185L;  (I don't know the significance of the 'L', I'm afraid).

Signed-off-by: Adrian Bassett <adrian.bassett@hotmail.co.uk>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years agomac80211: fixing null qos data frames check for reordering buffer
Ron Rindjunsky [Wed, 23 Jan 2008 16:17:13 +0000]
mac80211: fixing null qos data frames check for reordering buffer

This patch fixes a wrong condition for null qos data frames, causing us to
drop data frames needed for reordering as well.

Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years agob43legacy: fix MAC control and microcode init
Stefano Brivio [Wed, 23 Jan 2008 13:48:50 +0000]
b43legacy: fix MAC control and microcode init

This zeros out all microcode related memory before loading
the microcode.

This also fixes initialization of the MAC control register.
The _only_ place where we overwrite the contents of the MAC control
register is at the beginning of b43_chip_init().
All other places must do read() -> mask/set -> write() to not
overwrite existing bits.

This also adds a longer delay for waiting for the microcode
to initialize itself. It seems that the current timeout is sufficient
on all available devices, but there's no real reason why we shouldn't
wait for up to one second. Slow embedded devices might exist.
Better safe than sorry.

While at it, fix naming of MACCTL values.

This patch by Michael Buesch has been ported to b43legacy.

Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it>
Acked-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years agob43legacy: Fix rfkill allocation leakage in error paths
Michael Buesch [Wed, 23 Jan 2008 11:15:38 +0000]
b43legacy: Fix rfkill allocation leakage in error paths

We must kill rfkill in any error paths that trigger after rfkill init.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Acked-by: Stefano Brivio <stefano.brivio@polimi.it>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years agob43: Fix rfkill allocation leakage in error paths
Michael Buesch [Wed, 23 Jan 2008 11:02:35 +0000]
b43: Fix rfkill allocation leakage in error paths

We must kill rfkill in any error paths that trigger after rfkill init.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years agoath5k: debug level improvements
Bruno Randolf [Wed, 23 Jan 2008 01:27:51 +0000]
ath5k: debug level improvements

* use only one debug level for beacon debugging: unify ATH5K_DEBUG_BEACON and
ATH5K_DEBUG_BEACON_PROC.

* remove debug level ATH5K_DEBUG_FATAL. doesn't make sense as a debug level -
if it's fatal it should be logged as an error.

* fancier printing of debug levels. cat /debugfs/ath5k/phy0/debug.

* allow debug levels to be changed by echoing their name into
/debugfs/ath5k/phy0/debug. this will toggle the state, when it was off it will
be turned on and vice versa.

* use copy_from_user() when reading from the debug files. use unsigned int for
better optimization. reduce buffer sizes on stack.

drivers/net/wireless/ath5k/base.c:      Changes-licensed-under: 3-Clause-BSD
drivers/net/wireless/ath5k/debug.c:     Changes-licensed-under: GPL
drivers/net/wireless/ath5k/debug.h:     Changes-licensed-under: GPL

Signed-off-by: Bruno Randolf <bruno@thinktube.com>
Acked-by: Luis R. Rodriguez <mcgrof@winlab.rutgers.edu>
Acked-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years agomac80211: fix alignment warning
Johannes Berg [Fri, 11 Jan 2008 01:02:51 +0000]
mac80211: fix alignment warning

When I introduced the alignment warning I forgot the A-MSDU case which
has a different requirement because each frame contains 14-byte 802.3
headers in front of the IP payload. This patch moves the alignment
warning to a place where we know whether we're dealing with an A-MSDU
frame and adjusts it accordingly.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years agort61pci: fix-up merge damage
John W. Linville [Thu, 24 Jan 2008 18:08:01 +0000]
rt61pci: fix-up merge damage

A subtle merge error was introduced after re-queueing a patch for 2.6.24
instead of 2.6.25...

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years agoEnsure that we export __fatal_signal_pending()
Trond Myklebust [Fri, 1 Feb 2008 01:40:29 +0000]
Ensure that we export __fatal_signal_pending()

It may be used by the modules nfs.ko and sunrpc.ko

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
[ Made it a regular export rather than GPL-only  - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoMerge branch 'task_killable' of git://git.kernel.org/pub/scm/linux/kernel/git/willy...
Linus Torvalds [Fri, 1 Feb 2008 00:45:47 +0000]
Merge branch 'task_killable' of git://git./linux/kernel/git/willy/misc

* 'task_killable' of git://git.kernel.org/pub/scm/linux/kernel/git/willy/misc: (22 commits)
  Remove commented-out code copied from NFS
  NFS: Switch from intr mount option to TASK_KILLABLE
  Add wait_for_completion_killable
  Add wait_event_killable
  Add schedule_timeout_killable
  Use mutex_lock_killable in vfs_readdir
  Add mutex_lock_killable
  Use lock_page_killable
  Add lock_page_killable
  Add fatal_signal_pending
  Add TASK_WAKEKILL
  exit: Use task_is_*
  signal: Use task_is_*
  sched: Use task_contributes_to_load, TASK_ALL and TASK_NORMAL
  ptrace: Use task_is_*
  power: Use task_is_*
  wait: Use TASK_NORMAL
  proc/base.c: Use task_is_*
  proc/array.c: Use TASK_REPORT
  perfmon: Use task_is_*
  ...

Fixed up conflicts in NFS/sunrpc manually..

12 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched
Linus Torvalds [Thu, 31 Jan 2008 23:25:09 +0000]
Merge git://git./linux/kernel/git/mingo/linux-2.6-sched

* git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched:
  debug: turn ignore_loglevel into an early param
  sched: remove unused params
  sched: let +nice tasks have smaller impact
  sched: fix high wake up latencies with FAIR_USER_SCHED
  RCU: add help text for "RCU implementation type"

12 years agoMerge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/perex/alsa
Linus Torvalds [Thu, 31 Jan 2008 23:16:28 +0000]
Merge branch 'linus' of git://git./linux/kernel/git/perex/alsa

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/perex/alsa: (299 commits)
  [ALSA] version 1.0.16rc2
  [ALSA] hda: fix Mic in as output
  [ALSA] emu10k1 - Another EMU0404 Board ID
  [ALSA] emu10k1 - Fix kthread handling at resume
  [ALSA] emu10k1: General cleanup, add new locks, fix alsa bug#3501, kernel bug#9304.
  [ALSA] emu10k1 - Use enum for emu_model types
  [ALSA] emu10k1 - Don't create emu1010 controls for non-emu boards
  [ALSA] emu10k1 - 1616(M) cardbus improvements
  [ALSA] snd:emu10k1: E-Mu updates. Fixes to firmware loading and support for 0404.
  [ALSA] emu10k1: Add comments regarding E-Mu ins and outs.
  [ALSA] oxygen: revert SPI clock frequency change for AK4396/WM8785
  [ALSA] es1938 - improve capture hw pointer reads
  [ALSA] HDA-Intel - Add support for Intel SCH
  [ALSA] hda: Add GPIO mute support to STAC9205
  [ALSA] hda-codec - Add Dell T3400 support
  [ALSA] hda-codec - Add model for HP DV9553EG laptop
  [ALSA] hda-codec - Control SPDIF as slave
  [ALSA] hda_intel: ALSA HD Audio patch for Intel ICH10 DeviceID's
  [ALSA] Fix Oops with PCM OSS sync
  [ALSA] hda-codec - Add speaker automute to ALC262 HP models
  ...

12 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86
Linus Torvalds [Thu, 31 Jan 2008 23:15:32 +0000]
Merge git://git./linux/kernel/git/x86/linux-2.6-x86

* git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86:
  asm-generic/tlb.h: build fix
  x86: uninline __pte_free_tlb() and __pmd_free_tlb()
  x86: fix small sparse warning
  x86: fix sparse warning in kernel/scx200_32.c
  x86: early_ioremap_reset fix 2
  x86: c_p_a clflush_cache_range fix
  x86: change_page_attr_clear fix
  x86: fix sparse warnings in intel_cacheinfo.c

12 years agodebug: turn ignore_loglevel into an early param
Ingo Molnar [Thu, 31 Jan 2008 21:45:23 +0000]
debug: turn ignore_loglevel into an early param

i was debugging early crashes and wondered where all the printks
went. The reason: ignore_loglevel_setup() was not called yet ...

Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agosched: remove unused params
Gerald Stralko [Thu, 31 Jan 2008 21:45:23 +0000]
sched: remove unused params

This removes the extra struct task_struct *p parameter in inc_nr_running
and dec_nr_running functions.

Signed-off by: Jerry Stralko <gerb.stralko@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agosched: let +nice tasks have smaller impact
Peter Zijlstra [Thu, 31 Jan 2008 21:45:22 +0000]
sched: let +nice tasks have smaller impact

Michel Dänzr has bisected an interactivity problem with
plus-reniced tasks back to this commit:

 810e95ccd58d91369191aa4ecc9e6d4a10d8d0c8 is first bad commit
 commit 810e95ccd58d91369191aa4ecc9e6d4a10d8d0c8
 Author: Peter Zijlstra <a.p.zijlstra@chello.nl>
 Date:   Mon Oct 15 17:00:14 2007 +0200

 sched: another wakeup_granularity fix

      unit mis-match: wakeup_gran was used against a vruntime

fix this by assymetrically scaling the vtime of positive reniced
tasks.

Bisected-by: Michel Dänzer <michel@tungstengraphics.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agosched: fix high wake up latencies with FAIR_USER_SCHED
Srivatsa Vaddagiri [Thu, 31 Jan 2008 21:45:22 +0000]
sched: fix high wake up latencies with FAIR_USER_SCHED

The reason why we are getting better wakeup latencies for
!FAIR_USER_SCHED is because of this snippet of code in place_entity():

if (!initial) {
/* sleeps upto a single latency don't count. */
if (sched_feat(NEW_FAIR_SLEEPERS) && entity_is_task(se))
     ^^^^^^^^^^^^^^^^^^
vruntime -= sysctl_sched_latency;

/* ensure we never gain time by being placed backwards. */
vruntime = max_vruntime(se->vruntime, vruntime);
}

NEW_FAIR_SLEEPERS feature gives credit for sleeping only to tasks and
not group-level entities. With the patch attached, I could see that
wakeup latencies with FAIR_USER_SCHED are restored to the same level as
!FAIR_USER_SCHED.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agoRCU: add help text for "RCU implementation type"
Paul E. McKenney [Thu, 31 Jan 2008 21:45:22 +0000]
RCU: add help text for "RCU implementation type"

This patch supplies help text for the "RCU implementation type"
kernel configuration choice.

Reported-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agoasm-generic/tlb.h: build fix
Ingo Molnar [Thu, 31 Jan 2008 21:05:48 +0000]
asm-generic/tlb.h: build fix

bring back the avr32, blackfin, sh, sparc architectures into working order,
by reverting the effects of this change that came in via the x86 tree:

   commit a5a19c63f4e55e32dc0bc3d936d7f94793d8b380
   Author: Jeremy Fitzhardinge <jeremy@goop.org>
   Date:   Wed Jan 30 13:33:39 2008 +0100

       x86: demacro asm-x86/pgalloc_32.h

Sorry about that!

Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agox86: uninline __pte_free_tlb() and __pmd_free_tlb()
Ingo Molnar [Thu, 31 Jan 2008 21:05:48 +0000]
x86: uninline __pte_free_tlb() and __pmd_free_tlb()

this also removes an include file dependency.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agox86: fix small sparse warning
Harvey Harrison [Thu, 31 Jan 2008 21:05:47 +0000]
x86: fix small sparse warning

arch/x86/kernel/ds.c:226:9: warning: Using plain integer as NULL pointer

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agox86: fix sparse warning in kernel/scx200_32.c
Harvey Harrison [Thu, 31 Jan 2008 21:05:45 +0000]
x86: fix sparse warning in kernel/scx200_32.c

arch/x86/kernel/scx200_32.c:68:72: warning: Using plain integer as NULL pointer

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agox86: early_ioremap_reset fix 2
Huang, Ying [Thu, 31 Jan 2008 21:05:45 +0000]
x86: early_ioremap_reset fix 2

This patch fixes a bug of early_ioremap_reset(), which had been fixed
before by "convert the boot time page table to the kernels native
format" patch. But that patch has been reverted now.

Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agox86: c_p_a clflush_cache_range fix
Huang, Ying [Thu, 31 Jan 2008 21:05:45 +0000]
x86: c_p_a clflush_cache_range fix

Because in i386 early boot stage, boot_cpu_data may be not available,
which makes clflush_cach_range() into infinite loop, which is called
by change_page_attr(). This patch fixes this by setting
boot_cpu_data.x86_clflush_size in early_cpu_detect().

Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agox86: change_page_attr_clear fix
Huang, Ying [Thu, 31 Jan 2008 21:05:43 +0000]
x86: change_page_attr_clear fix

This patch replaces __change_page_attr_set_clr() with
change_page_attr_set_clr() in change_page_attr_clear() to flush the
TLB/cache properly.

Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agox86: fix sparse warnings in intel_cacheinfo.c
Harvey Harrison [Thu, 31 Jan 2008 21:05:43 +0000]
x86: fix sparse warnings in intel_cacheinfo.c

arch/x86/kernel/cpu/intel_cacheinfo.c:355:7: warning: symbol 'i' shadows an earlier one
arch/x86/kernel/cpu/intel_cacheinfo.c:296:39: originally declared here
arch/x86/kernel/cpu/intel_cacheinfo.c:367:18: warning: incorrect type in argument 2 (different signedness)
arch/x86/kernel/cpu/intel_cacheinfo.c:367:18:    expected unsigned int *eax
arch/x86/kernel/cpu/intel_cacheinfo.c:367:18:    got int *
arch/x86/kernel/cpu/intel_cacheinfo.c:367:28: warning: incorrect type in argument 3 (different signedness)
arch/x86/kernel/cpu/intel_cacheinfo.c:367:28:    expected unsigned int *ebx
arch/x86/kernel/cpu/intel_cacheinfo.c:367:28:    got int *
arch/x86/kernel/cpu/intel_cacheinfo.c:367:38: warning: incorrect type in argument 4 (different signedness)
arch/x86/kernel/cpu/intel_cacheinfo.c:367:38:    expected unsigned int *ecx
arch/x86/kernel/cpu/intel_cacheinfo.c:367:38:    got int *
arch/x86/kernel/cpu/intel_cacheinfo.c:367:48: warning: incorrect type in argument 5 (different signedness)
arch/x86/kernel/cpu/intel_cacheinfo.c:367:48:    expected unsigned int *edx
arch/x86/kernel/cpu/intel_cacheinfo.c:367:48:    got int *

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years ago[ALSA] version 1.0.16rc2
Jaroslav Kysela [Thu, 31 Jan 2008 16:40:18 +0000]
[ALSA] version 1.0.16rc2

Signed-off-by: Jaroslav Kysela <perex@perex.cz>

12 years ago[ALSA] hda: fix Mic in as output
Matthew Ranostay [Wed, 30 Jan 2008 13:58:38 +0000]
[ALSA] hda: fix Mic in as output

Some laptop has an internal analog microphone that is 'fixed'.
This patch prevents creating a 'Mic In as Output' switch for
ports that can't be outputs.

Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

12 years ago[ALSA] emu10k1 - Another EMU0404 Board ID
Veli-Matti Valtonen [Mon, 7 Jan 2008 11:36:56 +0000]
[ALSA] emu10k1 - Another EMU0404 Board ID

This is based on pseudo-random playing around with the capabilities.
With ca0102 this card gives no output atall, ca0108 appears to work
fine, so it rather looks similar to the EMU1010b/EMU1010 changes.
Some other people seem to have succeeded in using this aswell:
    https://bugtrack.alsa-project.org/alsa-bug/view.php?id=3496
From: Veli-Matti Valtonen <maligor@gmail.com>

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

12 years ago[ALSA] emu10k1 - Fix kthread handling at resume
Takashi Iwai [Fri, 14 Dec 2007 11:43:00 +0000]
[ALSA] emu10k1 - Fix kthread handling at resume

Don't create emu1010 kthread again at resume if it's already created.
Also make the thread function static.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

12 years ago[ALSA] emu10k1: General cleanup, add new locks, fix alsa bug#3501, kernel bug#9304.
James Courtier-Dutton [Sat, 10 Nov 2007 17:55:14 +0000]
[ALSA] emu10k1: General cleanup, add new locks, fix alsa bug#3501, kernel bug#9304.

Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

12 years ago[ALSA] emu10k1 - Use enum for emu_model types
Takashi Iwai [Fri, 21 Dec 2007 15:33:32 +0000]
[ALSA] emu10k1 - Use enum for emu_model types

Use enum instead of digits for emu_model types.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

12 years ago[ALSA] emu10k1 - Don't create emu1010 controls for non-emu boards
Takashi Iwai [Fri, 21 Dec 2007 15:20:12 +0000]
[ALSA] emu10k1 - Don't create emu1010 controls for non-emu boards

The last change for emu1616 introduced a bug that the driver creates
emu1010-related controls even on non-emu boards.  Fixed now.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

12 years ago[ALSA] emu10k1 - 1616(M) cardbus improvements
Ctirad Fertr [Thu, 13 Dec 2007 15:27:13 +0000]
[ALSA] emu10k1 - 1616(M) cardbus improvements

This patch improves E-Mu 1616(M) cardbus support. It adds definitions of the
new Microdock and 1010 cardbus registers (thanks again for descriptions
James) and improves mixer for this card. Now you can use S/PDIF and ADAT on
Mirodock and also use headpohone output on host cardbus card as another
independent output.

Signed-off-by: Ctirad Fertr <c.fertr@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

12 years ago[ALSA] snd:emu10k1: E-Mu updates. Fixes to firmware loading and support for 0404.
James Courtier-Dutton [Sun, 4 Nov 2007 14:08:26 +0000]
[ALSA] snd:emu10k1: E-Mu updates. Fixes to firmware loading and support for 0404.

Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

12 years ago[ALSA] emu10k1: Add comments regarding E-Mu ins and outs.
James Courtier-Dutton [Mon, 12 Nov 2007 12:11:53 +0000]
[ALSA] emu10k1: Add comments regarding E-Mu ins and outs.

Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

12 years ago[ALSA] oxygen: revert SPI clock frequency change for AK4396/WM8785
Clemens Ladisch [Wed, 30 Jan 2008 07:38:30 +0000]
[ALSA] oxygen: revert SPI clock frequency change for AK4396/WM8785

While the AK4396 and WM8785 datasheets say that the SPI clock cycle
length must be at least 200 ns, 320 ns seems not to work reliably with
the controller, so we better use 160 ns.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

12 years ago[ALSA] es1938 - improve capture hw pointer reads
Hermann Lauer [Wed, 30 Jan 2008 07:25:13 +0000]
[ALSA] es1938 - improve capture hw pointer reads

With the Solo1 (es1938) I got a lot of xrun's during capture on my machine.
Tracing that down it seems to be comming from reading ocassionaly bad hw
pointers from the chip.  This patch uses more checking to avoid that false
pointer reads.
Failed reads are giving back the last good value read instead of spinning in
a tight loop, which seems more appropriate to me in an interrupt. I think I
saw this trick used in another driver

Signed-off-by: Hermann Lauer <Hermann.Lauer@iwr.uni-heidelberg.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

12 years ago[ALSA] HDA-Intel - Add support for Intel SCH
Tobin Davis [Wed, 30 Jan 2008 07:13:55 +0000]
[ALSA] HDA-Intel - Add support for Intel SCH

This patch adds support for Intel's SCH mobile chipset.

Signed-off-by: Tobin Davis <tdavis@dsl-only.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

12 years ago[ALSA] hda: Add GPIO mute support to STAC9205
Matthew Ranostay [Tue, 29 Jan 2008 14:28:44 +0000]
[ALSA] hda: Add GPIO mute support to STAC9205

Support added for detecting HP jack presence via GPIO on several laptop docks.

Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

12 years ago[ALSA] hda-codec - Add Dell T3400 support
Douglas Kosovic [Tue, 29 Jan 2008 14:02:50 +0000]
[ALSA] hda-codec - Add Dell T3400 support

Added the support for Dell T3400 with AD1984 codec chip.
ALSA bug#3699:
https://bugtrack.alsa-project.org/alsa-bug/view.php?id=3699

Signed-off-by: Douglas Kosovic <douglask@itee.uq.edu.au>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

12 years ago[ALSA] hda-codec - Add model for HP DV9553EG laptop
Takashi Iwai [Tue, 29 Jan 2008 12:26:04 +0000]
[ALSA] hda-codec - Add model for HP DV9553EG laptop

Added the proper model for HP DV9553EG laptop with Cxt5045.
ALSA bug#3534
https://bugtrack.alsa-project.org/alsa-bug/view.php?id=3534

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

12 years ago[ALSA] hda-codec - Control SPDIF as slave
Takashi Iwai [Tue, 29 Jan 2008 11:47:02 +0000]
[ALSA] hda-codec - Control SPDIF as slave

Add SPDIF playback switch to the slave element list so that it
can be toggled via the master control as well.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

12 years ago[ALSA] hda_intel: ALSA HD Audio patch for Intel ICH10 DeviceID's
Jason Gaston [Tue, 29 Jan 2008 11:38:49 +0000]
[ALSA] hda_intel: ALSA HD Audio patch for Intel ICH10 DeviceID's

This patch adds the Intel ICH10 HD Audio Controller DeviceID's.

Signed-off-by: Jason Gaston <jason.d.gaston@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

12 years ago[ALSA] Fix Oops with PCM OSS sync
Takashi Iwai [Mon, 28 Jan 2008 22:53:41 +0000]
[ALSA] Fix Oops with PCM OSS sync

The PCM OSS emulation can cause Oops at sync operation due to the wrong
data size calculation.  Typically happening on Sparc64:
http://lkml.org/lkml/2008/1/24/426

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

12 years ago[ALSA] hda-codec - Add speaker automute to ALC262 HP models
Takashi Iwai [Mon, 28 Jan 2008 17:17:43 +0000]
[ALSA] hda-codec - Add speaker automute to ALC262 HP models

Added the speaker-automute function to ALC262 HP models.
Also, 'Mono' mixer elements are renamed as more intuitive 'Speaker'.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

12 years ago[ALSA] hda-codec - Add speaker automute to ALC260 HP models
Takashi Iwai [Mon, 28 Jan 2008 17:16:30 +0000]
[ALSA] hda-codec - Add speaker automute to ALC260 HP models

Added the speaker-automute function to ALC260 HP models.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

12 years ago[ALSA] hda-codec - Fix ALC262 HP-RP5700 model
Takashi Iwai [Mon, 28 Jan 2008 17:14:43 +0000]
[ALSA] hda-codec - Fix ALC262 HP-RP5700 model

Removed the PCM mixer elements conflicting with others.
Also renamed Master control to Headphone, which isn't a real master.
(The Master control is still created as a virtual master even after
 this rename.)

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>