10 years ago[IA64] xen: fix xen_get_eflags.
Isaku Yamahata [Tue, 18 Nov 2008 10:20:51 +0000]
[IA64] xen: fix xen_get_eflags.

fix xen_get_eflags. It doesn't take any argument.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Tony Luck <tony.luck@intel.com>

10 years ago[IA64] ia64/pv_ops/pv_cpu_ops: fix _IA64_REG_IP case.
Isaku Yamahata [Tue, 18 Nov 2008 10:19:50 +0000]
[IA64] ia64/pv_ops/pv_cpu_ops: fix _IA64_REG_IP case.

pv_cpu_ops.getreg(_IA64_REG_IP) returned constant.
But the returned ip valued should be the one in the caller, not of the callee.
This patch fixes that.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Tony Luck <tony.luck@intel.com>

10 years ago[IA64] remove duplicate include iommu.h
Huang Weiyi [Thu, 20 Nov 2008 21:38:16 +0000]
[IA64] remove duplicate include iommu.h

arch/ia64/kernel/pci-dma.c only needs to include iommu once.

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

10 years ago[IA64] use mprintk instead of printk, in ia64_mca_modify_original_stack
Hidetoshi Seto [Mon, 17 Nov 2008 01:18:08 +0000]
[IA64] use mprintk instead of printk, in ia64_mca_modify_original_stack

Using printk from MCA/INIT context is unsafe since it can cause deadlock.
The ia64_mca_modify_original_stack is called from both of mca handler and
init handler, so it should use mprintk instead of printk.

Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

10 years ago[IA64] Rationalize kernel mode alignment checking
Tony Luck [Thu, 20 Nov 2008 21:27:12 +0000]
[IA64] Rationalize kernel mode alignment checking

Itanium processors can handle some misaligned data accesses. They
also provide a mode where all such accesses are forced to trap. The
kernel was schizophrenic about use of this mode:

* Base kernel code ran in permissive mode where the only traps
  generated were from those cases that the h/w could not handle.
* Interrupt, syscall and trap code ran in strict mode where all
  unaligned accesses caused traps to the 0x5a00 unaligned reference
  vector.

Use strict alignment checking throughout the kernel, but make
sure that we continue to let user mode use more relaxed mode
as the default.

Signed-off-by: Tony Luck <tony.luck@intel.com>

10 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes...
Linus Torvalds [Thu, 20 Nov 2008 02:57:16 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/jbarnes/pci-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  PCI: Fix disable IRQ 0 in pci_reset_function()

10 years agoMerge branch 'x86/numa' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux...
Linus Torvalds [Thu, 20 Nov 2008 02:53:02 +0000]
Merge branch 'x86/numa' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86/numa' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: make NUMA on 32-bit depend on EXPERIMENTAL again
  x86, hibernate: fix breakage on x86_32 with CONFIG_NUMA set

10 years agoMerge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Thu, 20 Nov 2008 02:51:56 +0000]
Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: more general identifier for Phoenix BIOS
  AMD IOMMU: check for next_bit also in unmapped area
  AMD IOMMU: fix fullflush comparison length
  AMD IOMMU: enable device isolation per default
  AMD IOMMU: add parameter to disable device isolation
  x86, PEBS/DS: fix code flow in ds_request()
  x86: add rdtsc barrier to TSC sync check
  xen: fix scrub_page()
  x86: fix es7000 compiling
  x86, bts: fix unlock problem in ds.c
  x86, voyager: fix smp generic helper voyager breakage
  x86: move iomap.h to the new include location

10 years agocciss: fix DEBUG printk formats
Randy Dunlap [Wed, 19 Nov 2008 23:36:51 +0000]
cciss: fix DEBUG printk formats

Fix printk format warnings when CCISS_DEBUG is defined.

drivers/block/cciss.c:2856: warning: format '%d' expects type 'int', but argument 2 has type 'long unsigned int'
drivers/block/cciss.c:3205: warning: format '%x' expects type 'unsigned int', but argument 2 has type 'long unsigned int'
drivers/block/cciss.c:3236: warning: format '%x' expects type 'unsigned int', but argument 2 has type '__u64'
drivers/block/cciss.c:3246: warning: format '%x' expects type 'unsigned int', but argument 2 has type '__u64'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Mike Miller <mike.miller@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoW1 OMAP: Fix OMAP LDP boot crash
Stanley.Miao [Wed, 19 Nov 2008 23:36:50 +0000]
W1 OMAP: Fix OMAP LDP boot crash

OMAP LDP boot crash.  This is because w1 subsystem changed the search
interface, so update omap_hdq's search interface to follow the change.

Signed-off-by: Stanley.Miao <stanley.miao@windriver.com>
Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agodrivers/video/backlight/da903x.c: introduce one more missing kfree
Mike Rapoport [Wed, 19 Nov 2008 23:36:49 +0000]
drivers/video/backlight/da903x.c: introduce one more missing kfree

One more error handling code should have kfree as well

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Acked-by: Eric Miao <eric.miao@marvell.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agocgroups: fix a serious bug in cgroupstats
Li Zefan [Wed, 19 Nov 2008 23:36:48 +0000]
cgroups: fix a serious bug in cgroupstats

Try this, and you'll get oops immediately:
 # cd Documentation/accounting/
 # gcc -o getdelays getdelays.c
 # mount -t cgroup -o debug xxx /mnt
 # ./getdelays -C /mnt/tasks

Because a normal file's dentry->d_fsdata is a pointer to struct cftype,
not struct cgroup.

After the patch, it returns EINVAL if we try to get cgroupstats
from a normal file.

Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Paul Menage <menage@google.com>
Cc: <stable@kernel.org> [2.6.25.x, 2.6.26.x, 2.6.27.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agohostfs: fix a duplicated global function name
WANG Cong [Wed, 19 Nov 2008 23:36:46 +0000]
hostfs: fix a duplicated global function name

fs/hostfs/hostfs_user.c defines do_readlink() as non-static, and so does
fs/xfs/linux-2.6/xfs_ioctl.c when CONFIG_XFS_DEBUG=y.  So rename
do_readlink() in hostfs to hostfs_do_readlink().

I think it's better if XFS guys will also rename their do_readlink(),
it's not necessary to use such a general name.

Signed-off-by: WANG Cong <wangcong@zeuux.org>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agocirrusfb: remove unused variables
Vlada Peric [Wed, 19 Nov 2008 23:36:45 +0000]
cirrusfb: remove unused variables

After commit a1d35a7a (cirrusfb: use modedb and add mode_option
parameter), these variables are no longer used, so remove them to fix
compilation warning.

Signed-off-by: Vlada Periæ <vlada.peric@gmail.com>
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agovmscan: fix get_scan_ratio() comment
Rik van Riel [Wed, 19 Nov 2008 23:36:44 +0000]
vmscan: fix get_scan_ratio() comment

Fix the old comment on the scan ratio calculations.

Signed-off-by: Rik van Riel <riel@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoMAINTAINERS: change email address for rostedt
Steven Rostedt [Wed, 19 Nov 2008 23:36:43 +0000]
MAINTAINERS: change email address for rostedt

I find that I answer my email quicker on my home email account, than I do
on my work email.  Not to mention that I never check my work email while
traveling.  Please change my email address in the MAINTAINERS file from
srostedt@redhat.com to rostedt@goodmis.org.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agodrivers/hwmon/applesmc.c: add generic MacPro support
Henrik Rydberg [Wed, 19 Nov 2008 23:36:42 +0000]
drivers/hwmon/applesmc.c: add generic MacPro support

In order to analyze the SMC of the newer MacPros, applesmc needs to
recognize the machine.  This patch adds the missing generic dmi_match
entry for MacPro models.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Cc: Nicolas Boichat <nicolas@boichat.ch>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agodrivers/video/backlight/da903x.c: introduce missing kfree
Julia Lawall [Wed, 19 Nov 2008 23:36:41 +0000]
drivers/video/backlight/da903x.c: introduce missing kfree

Error handling code following a kzalloc should free the allocated data.

The semantic match that finds the problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@r exists@
local idexpression x;
statement S;
expression E;
identifier f,l;
position p1,p2;
expression *ptr != NULL;
@@

(
if ((x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...)) == NULL) S
|
x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...);
...
if (x == NULL) S
)
<... when != x
     when != if (...) { <+...x...+> }
x->f = E
...>
(
 return \(0\|<+...x...+>\|ptr\);
|
 return@p2 ...;
)

@script:python@
p1 << r.p1;
p2 << r.p2;
@@

print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Cc: Mike Rapoport <mike@compulab.co.il>
Cc: Richard Purdie <rpurdie@linux.intel.com>
Cc: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agodon't unlink an active swapfile
Hugh Dickins [Wed, 19 Nov 2008 23:36:38 +0000]
don't unlink an active swapfile

Peter Cordes is sorry that he rm'ed his swapfiles while they were in use,
he then had no pathname to swapoff.  It's a curious little oversight, but
not one worth a lot of hackery.  Kudos to Willy Tarreau for turning this
around from a discussion of synthetic pathnames to how to prevent unlink.
Mimic immutable: prohibit unlinking an active swapfile in may_delete()
(and don't worry my little head over the tiny race window).

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: Willy Tarreau <w@1wt.eu>
Acked-by: Christoph Hellwig <hch@infradead.org>
Cc: Peter Cordes <peter@cordes.ca>
Cc: Bodo Eggert <7eggert@gmx.de>
Cc: David Newall <davidn@davidnewall.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agovmscan: let GFP_NOFS go to swap again
Hugh Dickins [Wed, 19 Nov 2008 23:36:37 +0000]
vmscan: let GFP_NOFS go to swap again

In the past, GFP_NOFS (but of course not GFP_NOIO) was allowed to reclaim
by writing to swap.  That got partially broken in 2.6.23, when may_enter_fs
initialization was moved up before the allocation of swap, so its
PageSwapCache test was failing the first time around,

Fix it by setting may_enter_fs when add_to_swap() succeeds with
__GFP_IO.  In fact, check __GFP_IO before calling add_to_swap():
allocating swap we're not ready to use just increases disk seeking.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agomigration: fix writepage error
Hugh Dickins [Wed, 19 Nov 2008 23:36:36 +0000]
migration: fix writepage error

Page migration's writeout() has got understandably confused by the nasty
AOP_WRITEPAGE_ACTIVATE case: as in normal success, a writepage() error has
unlocked the page, so writeout() then needs to relock it.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agosprint_symbol(): use less stack
Hugh Dickins [Wed, 19 Nov 2008 23:36:36 +0000]
sprint_symbol(): use less stack

sprint_symbol(), itself used when dumping stacks, has been wasting 128
bytes of stack: lookup the symbol directly into the buffer supplied by the
caller, instead of using a locally declared namebuf.

I believe the name != buffer strcpy() is obsolete: the design here dates
from when module symbol lookup pointed into a supposedly const but sadly
volatile table; nowadays it copies, but an uncalled strcpy() looks better
here than the risk of a recursive BUG_ON().

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agocgroup: fix potential deadlock in pre_destroy
KAMEZAWA Hiroyuki [Wed, 19 Nov 2008 23:36:34 +0000]
cgroup: fix potential deadlock in pre_destroy

As Balbir pointed out, memcg's pre_destroy handler has potential deadlock.

It has following lock sequence.

cgroup_mutex (cgroup_rmdir)
    -> pre_destroy -> mem_cgroup_pre_destroy-> force_empty
-> cpu_hotplug.lock. (lru_add_drain_all->
      schedule_work->
                                      get_online_cpus)

But, cpuset has following.
cpu_hotplug.lock (call notifier)
-> cgroup_mutex. (within notifier)

Then, this lock sequence should be fixed.

Considering how pre_destroy works, it's not necessary to holding
cgroup_mutex() while calling it.

As a side effect, we don't have to wait at this mutex while memcg's
force_empty works.(it can be long when there are tons of pages.)

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agomm: vmalloc search restart fix
Glauber Costa [Wed, 19 Nov 2008 23:36:33 +0000]
mm: vmalloc search restart fix

Current vmalloc restart search for a free area in case we can't find one.
The reason is there are areas which are lazily freed, and could be
possibly freed now.  However, current implementation start searching the
tree from the last failing address, which is pretty much by definition at
the end of address space.  So, we fail.

The proposal of this patch is to restart the search from the beginning of
the requested vstart address.  This fixes the regression in running KVM
virtual machines for me, described in http://lkml.org/lkml/2008/10/28/349,
caused by commit db64fe02258f1507e13fe5212a989922323685ce.

Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agomm: vmalloc failure flush fix
Nick Piggin [Wed, 19 Nov 2008 23:36:33 +0000]
mm: vmalloc failure flush fix

An initial vmalloc failure should start off a synchronous flush of lazy
areas, in case someone is in progress flushing them already, which could
cause us to return an allocation failure even if there is plenty of KVA
free.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agomm: vmalloc allocator off by one
Nick Piggin [Wed, 19 Nov 2008 23:36:32 +0000]
mm: vmalloc allocator off by one

Fix off by one bug in the KVA allocator that can leave gaps in the address
space.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agocpuset: update top cpuset's mems after adding a node
Miao Xie [Wed, 19 Nov 2008 23:36:30 +0000]
cpuset: update top cpuset's mems after adding a node

After adding a node into the machine, top cpuset's mems isn't updated.

By reviewing the code, we found that the update function

  cpuset_track_online_nodes()

was invoked after node_states[N_ONLINE] changes.  It is wrong because
N_ONLINE just means node has pgdat, and if node has/added memory, we use
N_HIGH_MEMORY.  So, We should invoke the update function after
node_states[N_HIGH_MEMORY] changes, just like its commit says.

This patch fixes it.  And we use notifier of memory hotplug instead of
direct calling of cpuset_track_online_nodes().

Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Acked-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Paul Menage <menage@google.com
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoeCryptfs: Allocate up to two scatterlists for crypto ops on keys
Michael Halcrow [Wed, 19 Nov 2008 23:36:28 +0000]
eCryptfs: Allocate up to two scatterlists for crypto ops on keys

I have received some reports of out-of-memory errors on some older AMD
architectures.  These errors are what I would expect to see if
crypt_stat->key were split between two separate pages.  eCryptfs should
not assume that any of the memory sent through virt_to_scatterlist() is
all contained in a single page, and so this patch allocates two
scatterlist structs instead of one when processing keys.  I have received
confirmation from one person affected by this bug that this patch resolves
the issue for him, and so I am submitting it for inclusion in a future
stable release.

Note that virt_to_scatterlist() runs sg_init_table() on the scatterlist
structs passed to it, so the calls to sg_init_table() in
decrypt_passphrase_encrypted_session_key() are redundant.

Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Reported-by: Paulo J. S. Silva <pjssilva@ime.usp.br>
Cc: "Leon Woestenberg" <leon.woestenberg@gmail.com>
Cc: Tim Gardner <tim.gardner@canonical.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agospi_imx: full duplex dma corruption bugfix
Andrea Paterniani [Wed, 19 Nov 2008 23:36:26 +0000]
spi_imx: full duplex dma corruption bugfix

Fix unsafe order in dma mapping operation: always flush data from the
cache *BEFORE* invalidating it, to allow full duplex transfers where the
same buffer may be used for both writes and reads.

Signed-off-by: Andrea Paterniani <a.paterniani@swapp-eng.it>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agolcd: fix oops if driver only interested in .set_power
Ben Dooks [Wed, 19 Nov 2008 23:36:25 +0000]
lcd: fix oops if driver only interested in .set_power

The LCD driver core calls LCD drivers when either the blanking state or
the display mode has changed, but does not make any check to see if the
called driver has a .set_mode method.

This means if a driver only has a .set_power method then the system will
OOPS on changing mode (and with the console semaphore held so you cannot
easily see the problem).

Fix the problem by ensuring that either callback is valid before use.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoviafb: fix releasing of /proc/viafb/ subtree
Bruno Prémont [Wed, 19 Nov 2008 23:36:23 +0000]
viafb: fix releasing of /proc/viafb/ subtree

When unloading viafb module it does not remove it's /proc/viafb/ subtree
which causes multiple viafb directories to appear below proc when
mobprobing viafb and also lets kernel WARN() on duplicate proc entries:

[  145.458387] WARNING: at /usr/src/linux-2.6.28-rc3-git6/fs/proc/generic.c:551 proc_register+0xe6/0x160()
[  145.458945] proc_dir_entry '/proc/viafb' already registered
[  145.459278] Modules linked in: viafb(+) i2c_algo_bit cfbcopyarea cfbimgblt cfbfillrect snd_hda_intel snd_pcm snd_timer snd soundcore snd_page_alloc sg via_agp agpgart [last unloaded: drm]
[  145.460647] Pid: 1904, comm: modprobe Tainted: G        W  2.6.28-rc3-git6 #4
[  145.461064] Call Trace:
[  145.461248]  [<c01066f1>] ? dump_stack+0x1/0x80
[  145.461533]  [<c01228a3>] warn_slowpath+0x63/0x80
[  145.461851]  [<c0253ec9>] ? idr_get_empty_slot+0xe9/0x250
[  145.462186]  [<c0254120>] ? ida_get_new_above+0xf0/0x150
[  145.462528]  [<c019fb86>] proc_register+0xe6/0x160
[  145.462827]  [<c019fdc6>] proc_mkdir_mode+0x36/0x50
[  145.463135]  [<c019fdef>] proc_mkdir+0xf/0x20
[  145.463457]  [<f807173c>] viafb_init+0x73c/0xc86 [viafb]
[  145.463823]  [<f8071000>] ? viafb_init+0x0/0xc86 [viafb]
[  145.464147]  [<c010111d>] do_one_initcall+0x2d/0x160
[  145.464460]  [<c01a6543>] ? sysfs_add_file+0x13/0x20
[  145.464786]  [<c015f031>] ? vfree+0x21/0x30
[  145.465049]  [<c01433b5>] ? load_module+0x1215/0x1500
[  145.465381]  [<c014e455>] ? __alloc_pages_internal+0x95/0x400
[  145.465755]  [<c0143723>] sys_init_module+0x83/0x1a0
[  145.466065]  [<c016ceed>] ? sys_read+0x3d/0x70
[  145.466354]  [<c0103bc1>] sysenter_do_call+0x12/0x25
[  145.466653] ---[ end trace c84b37826e16748c ]---

Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org>
Cc: <JosephChan@via.com.tw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agopxa2xx_spi: bugfix full duplex dma data corruption
Ned Forrester [Wed, 19 Nov 2008 23:36:21 +0000]
pxa2xx_spi: bugfix full duplex dma data corruption

Fixes a data corruption bug in pxa2xx_spi.c when operating in full duplex
mode with DMA and using buffers that overlap.

SPI transmit and receive buffers are allowed to be the same or to overlap.
 However, this driver fails if such overlap is attempted in DMA mode
because it maps the rx and tx buffers in the wrong order.  By mapping
DMA_FROM_DEVICE (read) before DMA_TO_DEVICE (write), it invalidates the
cache before flushing it, thus discarding data which should have been
transmitted.

The patch corrects the order of mapping.  This bug exists in all versions
of pxa2xx_spi.c; similar bugs are in the drivers for two other SPI
controllers (au1500, imx).

A version of this patch has been tested on kernel 2.6.20 using
verification of loopback data with: random transfer length, random
bits-per-word, random positive offsets (both larger and smaller than
transfer length) between the start of the rx and tx buffers, and varying
clock rates.

Signed-off-by: Ned Forrester <nforrester@whoi.edu>
Cc: Vernon Sauder <vernoninhand@gmail.com>
Cc: J. Scott Merritt <merrij3@rpi.edu>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: <stable@kernel.org> [2.6.27.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agolib/scatterlist.c: fix kunmap() argument in sg_miter_stop()
Arjan van de Ven [Wed, 19 Nov 2008 23:36:19 +0000]
lib/scatterlist.c: fix kunmap() argument in sg_miter_stop()

kunmap() takes as argument the struct page that orginally got kmap()'d,
however the sg_miter_stop() function passed it the kernel virtual address
instead, resulting in weird stuff.

Somehow I ended up fixing this bug by accident while looking for a bug in
the same area.

Reported-by: kerneloops.org
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: <stable@kernel.org> [2.6.27.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agotmiofb: fix compilation with ACCEL disabled
Dmitry Baryshkov [Wed, 19 Nov 2008 23:36:19 +0000]
tmiofb: fix compilation with ACCEL disabled

Restore support for compiling tmiofb with acceleration disabled.

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoGRU: fix for debug option
Jack Steiner [Wed, 19 Nov 2008 23:36:18 +0000]
GRU: fix for debug option

Enable -D DEBUG in the GRU Makefile if CONFIG_SGI_GRU_DEBUG is selected.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agogpiolib: extend gpio label column width in debugfs file
Jarkko Nikula [Wed, 19 Nov 2008 23:36:17 +0000]
gpiolib: extend gpio label column width in debugfs file

There are already various drivers having bigger label than 12 bytes.  Most
of them fit well under 20 bytes but make column width exact so that
oversized labels don't mess up output alignment.

Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Acked-by: David Brownell <david-b@pacbell.net>
Cc: <stable@kernel.org> [2.6.26.x, 2.6.26.x, 2.6.27.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoDocumentation/kernel-parameters.txt: add min_addr, fix max_addr
Randy Dunlap [Wed, 19 Nov 2008 23:36:16 +0000]
Documentation/kernel-parameters.txt: add min_addr, fix max_addr

Add "min_addr" documentation.
For "max_addr", add nn before [KMG] since a number is needed and this
is consistent with other uses of [KMG].

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agosparc64: wire up accept4()
David Miller [Wed, 19 Nov 2008 23:36:15 +0000]
sparc64: wire up accept4()

This adds the sparc syscall hookups.

Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Ulrich Drepper <drepper@redhat.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoreintroduce accept4
Ulrich Drepper [Wed, 19 Nov 2008 23:36:14 +0000]
reintroduce accept4

Introduce a new accept4() system call.  The addition of this system call
matches analogous changes in 2.6.27 (dup3(), evenfd2(), signalfd4(),
inotify_init1(), epoll_create1(), pipe2()) which added new system calls
that differed from analogous traditional system calls in adding a flags
argument that can be used to access additional functionality.

The accept4() system call is exactly the same as accept(), except that
it adds a flags bit-mask argument.  Two flags are initially implemented.
(Most of the new system calls in 2.6.27 also had both of these flags.)

SOCK_CLOEXEC causes the close-on-exec (FD_CLOEXEC) flag to be enabled
for the new file descriptor returned by accept4().  This is a useful
security feature to avoid leaking information in a multithreaded
program where one thread is doing an accept() at the same time as
another thread is doing a fork() plus exec().  More details here:
http://udrepper.livejournal.com/20407.html "Secure File Descriptor Handling",
Ulrich Drepper).

The other flag is SOCK_NONBLOCK, which causes the O_NONBLOCK flag
to be enabled on the new open file description created by accept4().
(This flag is merely a convenience, saving the use of additional calls
fcntl(F_GETFL) and fcntl (F_SETFL) to achieve the same result.

Here's a test program.  Works on x86-32.  Should work on x86-64, but
I (mtk) don't have a system to hand to test with.

It tests accept4() with each of the four possible combinations of
SOCK_CLOEXEC and SOCK_NONBLOCK set/clear in 'flags', and verifies
that the appropriate flags are set on the file descriptor/open file
description returned by accept4().

I tested Ulrich's patch in this thread by applying against 2.6.28-rc2,
and it passes according to my test program.

/* test_accept4.c

  Copyright (C) 2008, Linux Foundation, written by Michael Kerrisk
       <mtk.manpages@gmail.com>

  Licensed under the GNU GPLv2 or later.
*/
#define _GNU_SOURCE
#include <unistd.h>
#include <sys/syscall.h>
#include <sys/socket.h>
#include <netinet/in.h>
#include <stdlib.h>
#include <fcntl.h>
#include <stdio.h>
#include <string.h>

#define PORT_NUM 33333

#define die(msg) do { perror(msg); exit(EXIT_FAILURE); } while (0)

/**********************************************************************/

/* The following is what we need until glibc gets a wrapper for
  accept4() */

/* Flags for socket(), socketpair(), accept4() */
#ifndef SOCK_CLOEXEC
#define SOCK_CLOEXEC    O_CLOEXEC
#endif
#ifndef SOCK_NONBLOCK
#define SOCK_NONBLOCK   O_NONBLOCK
#endif

#ifdef __x86_64__
#define SYS_accept4 288
#elif __i386__
#define USE_SOCKETCALL 1
#define SYS_ACCEPT4 18
#else
#error "Sorry -- don't know the syscall # on this architecture"
#endif

static int
accept4(int fd, struct sockaddr *sockaddr, socklen_t *addrlen, int flags)
{
   printf("Calling accept4(): flags = %x", flags);
   if (flags != 0) {
       printf(" (");
       if (flags & SOCK_CLOEXEC)
           printf("SOCK_CLOEXEC");
       if ((flags & SOCK_CLOEXEC) && (flags & SOCK_NONBLOCK))
           printf(" ");
       if (flags & SOCK_NONBLOCK)
           printf("SOCK_NONBLOCK");
       printf(")");
   }
   printf("\n");

#if USE_SOCKETCALL
   long args[6];

   args[0] = fd;
   args[1] = (long) sockaddr;
   args[2] = (long) addrlen;
   args[3] = flags;

   return syscall(SYS_socketcall, SYS_ACCEPT4, args);
#else
   return syscall(SYS_accept4, fd, sockaddr, addrlen, flags);
#endif
}

/**********************************************************************/

static int
do_test(int lfd, struct sockaddr_in *conn_addr,
       int closeonexec_flag, int nonblock_flag)
{
   int connfd, acceptfd;
   int fdf, flf, fdf_pass, flf_pass;
   struct sockaddr_in claddr;
   socklen_t addrlen;

   printf("=======================================\n");

   connfd = socket(AF_INET, SOCK_STREAM, 0);
   if (connfd == -1)
       die("socket");
   if (connect(connfd, (struct sockaddr *) conn_addr,
               sizeof(struct sockaddr_in)) == -1)
       die("connect");

   addrlen = sizeof(struct sockaddr_in);
   acceptfd = accept4(lfd, (struct sockaddr *) &claddr, &addrlen,
                      closeonexec_flag | nonblock_flag);
   if (acceptfd == -1) {
       perror("accept4()");
       close(connfd);
       return 0;
   }

   fdf = fcntl(acceptfd, F_GETFD);
   if (fdf == -1)
       die("fcntl:F_GETFD");
   fdf_pass = ((fdf & FD_CLOEXEC) != 0) ==
              ((closeonexec_flag & SOCK_CLOEXEC) != 0);
   printf("Close-on-exec flag is %sset (%s); ",
           (fdf & FD_CLOEXEC) ? "" : "not ",
           fdf_pass ? "OK" : "failed");

   flf = fcntl(acceptfd, F_GETFL);
   if (flf == -1)
       die("fcntl:F_GETFD");
   flf_pass = ((flf & O_NONBLOCK) != 0) ==
              ((nonblock_flag & SOCK_NONBLOCK) !=0);
   printf("nonblock flag is %sset (%s)\n",
           (flf & O_NONBLOCK) ? "" : "not ",
           flf_pass ? "OK" : "failed");

   close(acceptfd);
   close(connfd);

   printf("Test result: %s\n", (fdf_pass && flf_pass) ? "PASS" : "FAIL");
   return fdf_pass && flf_pass;
}

static int
create_listening_socket(int port_num)
{
   struct sockaddr_in svaddr;
   int lfd;
   int optval;

   memset(&svaddr, 0, sizeof(struct sockaddr_in));
   svaddr.sin_family = AF_INET;
   svaddr.sin_addr.s_addr = htonl(INADDR_ANY);
   svaddr.sin_port = htons(port_num);

   lfd = socket(AF_INET, SOCK_STREAM, 0);
   if (lfd == -1)
       die("socket");

   optval = 1;
   if (setsockopt(lfd, SOL_SOCKET, SO_REUSEADDR, &optval,
                  sizeof(optval)) == -1)
       die("setsockopt");

   if (bind(lfd, (struct sockaddr *) &svaddr,
            sizeof(struct sockaddr_in)) == -1)
       die("bind");

   if (listen(lfd, 5) == -1)
       die("listen");

   return lfd;
}

int
main(int argc, char *argv[])
{
   struct sockaddr_in conn_addr;
   int lfd;
   int port_num;
   int passed;

   passed = 1;

   port_num = (argc > 1) ? atoi(argv[1]) : PORT_NUM;

   memset(&conn_addr, 0, sizeof(struct sockaddr_in));
   conn_addr.sin_family = AF_INET;
   conn_addr.sin_addr.s_addr = htonl(INADDR_LOOPBACK);
   conn_addr.sin_port = htons(port_num);

   lfd = create_listening_socket(port_num);

   if (!do_test(lfd, &conn_addr, 0, 0))
       passed = 0;
   if (!do_test(lfd, &conn_addr, SOCK_CLOEXEC, 0))
       passed = 0;
   if (!do_test(lfd, &conn_addr, 0, SOCK_NONBLOCK))
       passed = 0;
   if (!do_test(lfd, &conn_addr, SOCK_CLOEXEC, SOCK_NONBLOCK))
       passed = 0;

   close(lfd);

   exit(passed ? EXIT_SUCCESS : EXIT_FAILURE);
}

[mtk.manpages@gmail.com: rewrote changelog, updated test program]
Signed-off-by: Ulrich Drepper <drepper@redhat.com>
Tested-by: Michael Kerrisk <mtk.manpages@gmail.com>
Acked-by: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: <linux-api@vger.kernel.org>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agofbdev: clean the penguin's dirty feet
Clemens Ladisch [Wed, 19 Nov 2008 23:36:10 +0000]
fbdev: clean the penguin's dirty feet

When booting in a direct color mode, the penguin has dirty feet, i.e.,
some pixels have the wrong color.  This is caused by
fb_set_logo_directpalette() which does not initialize the last 32 palette
entries.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agosysvipc: fix the ipc structures initialization
Nadia Derbey [Wed, 19 Nov 2008 23:36:08 +0000]
sysvipc: fix the ipc structures initialization

A problem was found while reviewing the code after Bugzilla bug
http://bugzilla.kernel.org/show_bug.cgi?id=11796.

In ipc_addid(), the newly allocated ipc structure is inserted into the
ipcs tree (i.e made visible to readers) without locking it.  This is not
correct since its initialization continues after it has been inserted in
the tree.

This patch moves the ipc structure lock initialization + locking before
the actual insertion.

Signed-off-by: Nadia Derbey <Nadia.Derbey@bull.net>
Reported-by: Clement Calmels <cboulte@gmail.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: <stable@kernel.org> [2.6.27.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agodrivers/video: bad error test before a dereference
Julien Brunel [Wed, 19 Nov 2008 23:36:07 +0000]
drivers/video: bad error test before a dereference

The error test that follows the call to backlight_device_register semms
not to concern the right variable.

A simplified version of the semantic match that finds this problem is
as follows:
(http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@def0@
expression x;
position p0;
@@
x@p0 = backlight_device_register(...)

@protected@
expression def0.x,E;
position def0.p0;
position p;
statement S;
@@
x@p0
... when != x = E
if (!IS_ERR(x) && ...) {<... x@p ...>} else S

@unprotected@
expression def0.x;
identifier fld;
position def0.p0;
position p != protected.p;
@@
x@p0
... when != x = E
* x@p->fld
// </smpl>

Signed-off-by: Julien Brunel <brunel@diku.dk>
Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agohwmon: applesmc: Add support for iMac 6
Henrik Rydberg [Wed, 19 Nov 2008 23:36:06 +0000]
hwmon: applesmc: Add support for iMac 6

Add temperature sensor support for iMac 6.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Tested-by: Caleb Hyde <caleb.hyde@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoPCI: Fix disable IRQ 0 in pci_reset_function()
Sheng Yang [Tue, 11 Nov 2008 09:17:45 +0000]
PCI: Fix disable IRQ 0 in pci_reset_function()

Before initialization, dev->irq may be zero. Make sure we don't disable
it at reset time in that case.

Reviewed-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

10 years agoParport driver: disable pc-style parport on Blackfin systems
Mike Frysinger [Tue, 18 Nov 2008 07:12:42 +0000]
Parport driver: disable pc-style parport on Blackfin systems

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoMerge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
Linus Torvalds [Tue, 18 Nov 2008 16:07:51 +0000]
Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  block: hold extra reference to bio in blk_rq_map_user_iov()
  relay: fix cpu offline problem
  Release old elevator on change elevator
  block: fix boot failure with CONFIG_DEBUG_BLOCK_EXT_DEVT=y and nash
  block/md: fix md autodetection
  block: make add_partition() return pointer to hd_struct
  block: fix add_partition() error path

10 years agosuspend: use WARN not WARN_ON to print the message
Arjan van de Ven [Tue, 18 Nov 2008 14:56:51 +0000]
suspend: use WARN not WARN_ON to print the message

By using WARN(), kerneloops.org can collect which component is causing
the delay and make statistics about that. suspend_test_finish() is
currently the number 2 item but unless we can collect who's causing
it we're not going to be able to fix the hot topic ones..

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoMerge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Tue, 18 Nov 2008 16:06:35 +0000]
Merge branch 'tracing-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  kernel/profile.c: fix section mismatch warning
  function tracing: fix wrong pos computing when read buffer has been fulfilled
  tracing: fix mmiotrace resizing crash
  ring-buffer: no preempt for sched_clock()
  ring-buffer: buffer record on/off switch

10 years agoMerge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Tue, 18 Nov 2008 16:06:21 +0000]
Merge branch 'sched-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  cpuset: fix regression when failed to generate sched domains
  sched, signals: fix the racy usage of ->signal in account_group_xxx/run_posix_cpu_timers
  sched: fix kernel warning on /proc/sched_debug access
  sched: correct sched-rt-group.txt pathname in init/Kconfig

10 years agoMerge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Tue, 18 Nov 2008 16:06:00 +0000]
Merge branch 'core-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  swiotlb: use coherent_dma_mask in alloc_coherent
  MAINTAINERS: remove me as RAID maintainer

10 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney...
Linus Torvalds [Tue, 18 Nov 2008 16:05:43 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/cooloney/blackfin-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6:
  Blackfin arch: fix a broken define in dma-mapping
  Blackfin arch: fix bug - Turn on DEBUG_DOUBLEFAULT, booting SMP kernel crash
  Blackfin arch: fix bug - shared lib function in L2 failed be called
  Blackfin arch: fix incorrect limit check for bf54x check_gpio
  Blackfin arch: fix bug - Cpufreq assumes clocks in kHz and not Hz.
  Blackfin arch: dont warn when running a kernel on the oldest supported silicon
  Blackfin arch: fix bug - kernel build with write back policy fails to be booted up
  Blackfin arch: fix bug - dmacopy test case fail on all platform
  Blackfin arch: Fix typo when adding CONFIG_DEBUG_VERBOSE
  Blackfin arch: don't copy bss when copying L1
  Blackfin arch: fix bug - Fail to boot jffs2 kernel for BF561 with SMP patch
  Blackfin arch: handle case of d_path() returning error in decode_address()

10 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
Linus Torvalds [Tue, 18 Nov 2008 16:05:05 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: hda - Fix resume of GPIO unsol event for STAC/IDT
  ALSA: hda - Add quirks for HP Pavilion DV models
  ALSA: hda - Fix GPIO initialization in patch_stac92hd71bxx()
  ALSA: hda - Check model type instead of SSID in patch_92hd71bxx()
  ALSA: sound/pci/pcxhr/pcxhr.c: introduce missing kfree and pci_disable_device
  ALSA: hda: STAC_VREF_EVENT value change
  ALSA: hda - Missing NULL check in hda_beep.c
  ALSA: hda - Add digital beep playback switch for STAC/IDT codecs

10 years agoMerge branch 'iommu-fixes-2.6.28' of git://git.kernel.org/pub/scm/linux/kernel/git...
Ingo Molnar [Tue, 18 Nov 2008 15:48:49 +0000]
Merge branch 'iommu-fixes-2.6.28' of git://git./linux/kernel/git/joro/linux-2.6-iommu into x86/urgent

10 years agox86: more general identifier for Phoenix BIOS
Philipp Kohlbecher [Sun, 16 Nov 2008 11:11:01 +0000]
x86: more general identifier for Phoenix BIOS

Impact: widen the reach of the low-memory-protect DMI quirk

Phoenix BIOSes variously identify their vendor as "Phoenix Technologies,
LTD" or "Phoenix Technologies LTD" (without the comma.)

This patch makes the identification string in the bad_bios_dmi_table
more general (following a suggestion by Ingo Molnar), so that both
versions are handled.

Again, the patched file compiles cleanly and the patch has been tested
successfully on my machine.

Signed-off-by: Philipp Kohlbecher <xt28@gmx.de>
Cc: <stable@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agoAMD IOMMU: check for next_bit also in unmapped area
Joerg Roedel [Mon, 17 Nov 2008 18:11:46 +0000]
AMD IOMMU: check for next_bit also in unmapped area

Impact: fix possible use of stale IO/TLB entries

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

10 years agoAMD IOMMU: fix fullflush comparison length
Joerg Roedel [Mon, 17 Nov 2008 14:16:43 +0000]
AMD IOMMU: fix fullflush comparison length

Impact: fix comparison length for 'fullflush'

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

10 years agoAMD IOMMU: enable device isolation per default
Joerg Roedel [Mon, 17 Nov 2008 14:09:20 +0000]
AMD IOMMU: enable device isolation per default

Impact: makes device isolation the default for AMD IOMMU

Some device drivers showed double-free bugs of DMA memory while testing
them with AMD IOMMU. If all devices share the same protection domain
this can lead to data corruption and data loss. Prevent this by putting
each device into its own protection domain per default.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

10 years agoAMD IOMMU: add parameter to disable device isolation
Joerg Roedel [Mon, 17 Nov 2008 14:07:17 +0000]
AMD IOMMU: add parameter to disable device isolation

Impact: add a new AMD IOMMU kernel command line parameter

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

10 years agox86, PEBS/DS: fix code flow in ds_request()
Ingo Molnar [Tue, 18 Nov 2008 14:23:08 +0000]
x86, PEBS/DS: fix code flow in ds_request()

this compiler warning:

  arch/x86/kernel/ds.c: In function 'ds_request':
  arch/x86/kernel/ds.c:368: warning: 'context' may be used uninitialized in this function

Shows that the code flow in ds_request() is buggy - it goes into
the unlock+release-context path even when the context is not allocated
yet.

First allocate the context, then do the other checks.

Also, take care with GFP allocations under the ds_lock spinlock.

Cc: <stable@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agoblock: hold extra reference to bio in blk_rq_map_user_iov()
Jens Axboe [Tue, 18 Nov 2008 14:07:05 +0000]
block: hold extra reference to bio in blk_rq_map_user_iov()

If the size passed in is OK but we end up mapping too many segments,
we call the unmap path directly like from IO completion. But from IO
completion we have an extra reference to the bio, so this error case
goes OOPS when it attempts to free and already free bio.

Fix it by getting an extra reference to the bio before calling the
unmap failure case.

Reported-by: Petr Vandrovec <vandrove@vc.cvut.cz>

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

10 years agorelay: fix cpu offline problem
Lai Jiangshan [Fri, 14 Nov 2008 09:44:59 +0000]
relay: fix cpu offline problem

relay_open() will close allocated buffers when failed.
but if cpu offlined, some buffer will not be closed.
this patch fixed it.

and did cleanup for relay_reset() too.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

10 years agoRelease old elevator on change elevator
Zhaolei [Fri, 14 Nov 2008 08:44:33 +0000]
Release old elevator on change elevator

We should release old elevator when change to use a new one.

Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

10 years agoblock: fix boot failure with CONFIG_DEBUG_BLOCK_EXT_DEVT=y and nash
Zhang, Yanmin [Fri, 14 Nov 2008 07:26:30 +0000]
block: fix boot failure with CONFIG_DEBUG_BLOCK_EXT_DEVT=y and nash

We run into system boot failure with kernel 2.6.28-rc. We found it on a
couple of machines, including T61 notebook, nehalem machine, and another
HPC NX6325 notebook.  All the machines use FedoraCore 8 or FedoraCore 9.
With kernel prior to 2.6.28-rc, system boot doesn't fail.

I debug it and locate the root cause. Pls. see
http://bugzilla.kernel.org/show_bug.cgi?id=11899
https://bugzilla.redhat.com/show_bug.cgi?id=471517

As a matter of fact, there are 2 bugs.

1)root=/dev/sda1, system boot randomly fails. Mostly, boot for 5 times
and fails once. nash has a bug. Some of its functions misuse return
value 0.  Sometimes, 0 means timeout and no uevent available. Sometimes,
0 means nash gets an uevent, but the uevent isn't block-related (for
exmaple, usb). If by coincidence, kernel tells nash that uevents are
available, but kernel also set timeout, nash might stops collecting
other uevents in queue if current uevent isn't block-related.  I work
out a patch for nash to fix it.
http://bugzilla.kernel.org/attachment.cgi?id=18858

2) root=LABEL=/, system always can't boot. initrd init reports
switchroot fails. Here is an executation branch of nash when booting:
    (1) nash read /sys/block/sda/dev; Assume major is 8 (on my desktop)
    (2) nash query /proc/devices with the major number; It found line
"8 sd";
    (3) nash use 'sd' to search its own probe table to find device (DISK)
type for the device and add it to its own list;
    (4) Later on, it probes all devices in its list to get filesystem
labels; scsi register "8 sd" always.

When major is 259, nash fails to find the device(DISK) type. I enables
CONFIG_DEBUG_BLOCK_EXT_DEVT=y when compiling kernel, so 259 is picked up
for device /dev/sda1, which causes nash to fail to find device (DISK)
type.

To fixing issue 2), I create a patch for nash and another patch for
kernel.

http://bugzilla.kernel.org/attachment.cgi?id=18859
http://bugzilla.kernel.org/attachment.cgi?id=18837

Below is the patch for kernel 2.6.28-rc4. It registers blkext, a new
block device in proc/devices.

With 2 patches on nash and 1 patch on kernel, I boot my machines for
dozens of times without failure.

Signed-off-by Zhang Yanmin <yanmin.zhang@linux.intel.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

10 years agoblock/md: fix md autodetection
Tejun Heo [Mon, 10 Nov 2008 06:30:47 +0000]
block/md: fix md autodetection

Block ext devt conversion missed md_autodetect_dev() call in
rescan_partitions() leaving md autodetect unable to see partitions.
Fix it.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

10 years agoblock: make add_partition() return pointer to hd_struct
Tejun Heo [Mon, 10 Nov 2008 06:29:58 +0000]
block: make add_partition() return pointer to hd_struct

Make add_partition() return pointer to the new hd_struct on success
and ERR_PTR() value on failure.  This change will be used to fix md
autodetection bug.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

10 years agoblock: fix add_partition() error path
Tejun Heo [Mon, 10 Nov 2008 06:28:59 +0000]
block: fix add_partition() error path

Partition stats structure was not freed on devt allocation failure
path.  Fix it.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

10 years agoMerge branches 'topic/fix/hda' and 'topic/fix/misc' into for-linus
Takashi Iwai [Tue, 18 Nov 2008 12:49:39 +0000]
Merge branches 'topic/fix/hda' and 'topic/fix/misc' into for-linus

10 years agoALSA: hda - Fix resume of GPIO unsol event for STAC/IDT
Takashi Iwai [Tue, 18 Nov 2008 09:55:36 +0000]
ALSA: hda - Fix resume of GPIO unsol event for STAC/IDT

Use cached write for setting the GPIO unsolicited event mask to be
restored properly at resume.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

10 years agoALSA: hda - Add quirks for HP Pavilion DV models
Takashi Iwai [Tue, 18 Nov 2008 09:48:41 +0000]
ALSA: hda - Add quirks for HP Pavilion DV models

Added the quirk entries for HP Pavilion DV5 and DV7 with model=hp-m4.

Reference: Novell bnc#445321, bnc#445161
https://bugzilla.novell.com/show_bug.cgi?id=445321
https://bugzilla.novell.com/show_bug.cgi?id=445161

Signed-off-by: Takashi Iwai <tiwai@suse.de>

10 years agoBlackfin arch: fix a broken define in dma-mapping
Mike Frysinger [Tue, 18 Nov 2008 09:48:22 +0000]
Blackfin arch: fix a broken define in dma-mapping

dma_mapping_error is an actual function, so fix broken define with a
real inline stub

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

10 years agoBlackfin arch: fix bug - Turn on DEBUG_DOUBLEFAULT, booting SMP kernel crash
Graf Yang [Tue, 18 Nov 2008 09:48:22 +0000]
Blackfin arch: fix bug - Turn on DEBUG_DOUBLEFAULT, booting SMP kernel crash

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

10 years agoALSA: hda - Fix GPIO initialization in patch_stac92hd71bxx()
Takashi Iwai [Tue, 18 Nov 2008 09:45:15 +0000]
ALSA: hda - Fix GPIO initialization in patch_stac92hd71bxx()

Fixed the GPIO mask and co initialization in patch_stac92hd71bxx()
so that the gpio_maks for HP_M4 model is set properly.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

10 years agokernel/profile.c: fix section mismatch warning
Rakib Mullick [Tue, 18 Nov 2008 04:15:24 +0000]
kernel/profile.c: fix section mismatch warning

Impact: fix section mismatch warning in kernel/profile.c

Here, profile_nop function has been called from a non-init function
create_hash_tables(void). Which generetes a section mismatch warning.
Previously, create_hash_tables(void) was a init function. So, removing
__init from create_hash_tables(void) requires profile_nop to be
non-init.

This patch makes profile_nop function inline and fixes the
following warning:

 WARNING: vmlinux.o(.text+0x6ebb6): Section mismatch in reference from
 the function create_hash_tables() to the function
 .init.text:profile_nop()
 The function create_hash_tables() references
 the function __init profile_nop().
 This is often because create_hash_tables lacks a __init
 annotation or the annotation of profile_nop is wrong.

Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agocpuset: fix regression when failed to generate sched domains
Li Zefan [Tue, 18 Nov 2008 06:02:03 +0000]
cpuset: fix regression when failed to generate sched domains

Impact: properly rebuild sched-domains on kmalloc() failure

When cpuset failed to generate sched domains due to kmalloc()
failure, the scheduler should fallback to the single partition
'fallback_doms' and rebuild sched domains, but now it only
destroys but not rebuilds sched domains.

The regression was introduced by:

| commit dfb512ec4834116124da61d6c1ee10fd0aa32bd6
| Author: Max Krasnyansky <maxk@qualcomm.com>
| Date:   Fri Aug 29 13:11:41 2008 -0700
|
|    sched: arch_reinit_sched_domains() must destroy domains to force rebuild

After the above commit, partition_sched_domains(0, NULL, NULL) will
only destroy sched domains and partition_sched_domains(1, NULL, NULL)
will create the default sched domain.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Max Krasnyansky <maxk@qualcomm.com>
Cc: <stable@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6
Linus Torvalds [Tue, 18 Nov 2008 04:53:31 +0000]
Merge git://git./linux/kernel/git/sfrench/cifs-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  prevent cifs_writepages() from skipping unwritten pages
  Fixed parsing of mount options when doing DFS submount
  [CIFS] Fix check for tcon seal setting and fix oops on failed mount from earlier patch
  [CIFS] Fix build break
  cifs: reinstate sharing of tree connections
  [CIFS] minor cleanup to cifs_mount
  cifs: reinstate sharing of SMB sessions sans races
  cifs: disable sharing session and tcon and add new TCP sharing code
  [CIFS] clean up server protocol handling
  [CIFS] remove unused list, add new cifs sock list to prepare for mount/umount fix
  [CIFS] Fix cifs reconnection flags
  [CIFS] Can't rely on iov length and base when kernel_recvmsg returns error

10 years agoprevent cifs_writepages() from skipping unwritten pages
Dave Kleikamp [Tue, 18 Nov 2008 03:49:05 +0000]
prevent cifs_writepages() from skipping unwritten pages

Fixes a data corruption under heavy stress in which pages could be left
dirty after all open instances of a inode have been closed.

In order to write contiguous pages whenever possible, cifs_writepages()
asks pagevec_lookup_tag() for more pages than it may write at one time.
Normally, it then resets index just past the last page written before calling
pagevec_lookup_tag() again.

If cifs_writepages() can't write the first page returned, it wasn't resetting
index, and the next call to pagevec_lookup_tag() resulted in skipping all of
the pages it previously returned, even though cifs_writepages() did nothing
with them.  This can result in data loss when the file descriptor is about
to be closed.

This patch ensures that index gets set back to the next returned page so
that none get skipped.

Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Cc: Shirish S Pargaonkar <shirishp@us.ibm.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>

10 years agoFixed parsing of mount options when doing DFS submount
Igor Mammedov [Thu, 23 Oct 2008 09:58:42 +0000]
Fixed parsing of mount options when doing DFS submount

Since these hit the same routines, and are relatively small, it is easier to review
them as one patch.

Fixed incorrect handling of the last option in some cases
Fixed prefixpath handling convert path_consumed into host depended string length (in bytes)
Use non default separator if it is provided in the original mount options

Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Igor Mammedov <niallain@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>

10 years agox86: add rdtsc barrier to TSC sync check
Venki Pallipadi [Mon, 17 Nov 2008 22:43:58 +0000]
x86: add rdtsc barrier to TSC sync check

Impact: fix incorrectly marked unstable TSC clock

Patch (commit 0d12cdd "sched: improve sched_clock() performance") has
a regression on one of the test systems here.

With the patch, I see:

 checking TSC synchronization [CPU#0 -> CPU#1]:
 Measured 28 cycles TSC warp between CPUs, turning off TSC clock.
 Marking TSC unstable due to check_tsc_sync_source failed

Whereas, without the patch syncs pass fine on all CPUs:

 checking TSC synchronization [CPU#0 -> CPU#1]: passed.

Due to this, TSC is marked unstable, when it is not actually unstable.
This is because syncs in check_tsc_wrap() goes away due to this commit.

As per the discussion on this thread, correct way to fix this is to add
explicit syncs as below?

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agoRemove -mno-spe flags as they dont belong
Kumar Gala [Sat, 15 Nov 2008 18:02:34 +0000]
Remove -mno-spe flags as they dont belong

For some unknown reason at Steven Rostedt added in disabling of the SPE
instruction generation for e500 based PPC cores in commit
6ec562328fda585be2d7f472cfac99d3b44d362a.

We are removing it because:

1. It generates e500 kernels that don't work
2. its not the correct set of flags to do this
3. we handle this in the arch/powerpc/Makefile already
4. its unknown in talking to Steven why he did this

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Tested-and-Acked-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoMerge branch 'for-linus' of git://git.o-hand.com/linux-mfd
Linus Torvalds [Mon, 17 Nov 2008 18:45:39 +0000]
Merge branch 'for-linus' of git://git.o-hand.com/linux-mfd

* 'for-linus' of git://git.o-hand.com/linux-mfd:
  mfd: Correct WM8350 I2C return code usage
  mfd: fix event masking for da9030

10 years agoxen: fix scrub_page()
Jeremy Fitzhardinge [Mon, 17 Nov 2008 17:35:00 +0000]
xen: fix scrub_page()

Impact: fix guest kernel crash with CONFIG_XEN_SCRUB_PAGES=y

Jens noticed that scrub_page() has a buggy unmap of the wrong
thing. (virtual address instead of page)

Linus pointed out that the whole scrub_page() code is an unnecessary
reimplementation of clear_highpage() to begin with.

Just use clear_highpage() rather than reimplementing it poorly.

Reported-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years ago[CIFS] Fix check for tcon seal setting and fix oops on failed mount from earlier...
Steve French [Mon, 17 Nov 2008 16:03:00 +0000]
[CIFS] Fix check for tcon seal setting and fix oops on failed mount from earlier patch

set tcon->ses earlier

If the inital tree connect fails, we'll end up calling cifs_put_smb_ses
with a NULL pointer. Fix it by setting the tcon->ses earlier.

Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>

10 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6
Linus Torvalds [Mon, 17 Nov 2008 15:54:47 +0000]
Merge git://git./linux/kernel/git/davem/sparc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  rtc: rtc-sun4v fixes, revised
  sparc: Fix tty compile warnings.
  sparc: struct device - replace bus_id with dev_name(), dev_set_name()

10 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Mon, 17 Nov 2008 15:53:25 +0000]
Merge git://git./linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (27 commits)
  rtnetlink: propagate error from dev_change_flags in do_setlink()
  isdn: remove extra byteswap in isdn_net_ciscohdlck_slarp_send_reply
  Phonet: refuse to send bigger than MTU packets
  e1000e: fix IPMI traffic
  e1000e: fix warn_on reload after phy_id error
  phy: fix phy address bug
  e100: fix dma error in direction for mapping
  igb: use dev_printk instead of printk
  qla3xxx: Cleanup: Fix link print statements.
  igb: Use device_set_wakeup_enable
  e1000: Use device_set_wakeup_enable
  e1000e: Use device_set_wakeup_enable
  via-velocity: enable perfect filtering for multicast packets
  phy: Add support for Marvell 88E1118 PHY
  mlx4_en: Pause parameters per port
  phylib: fix premature freeing of struct mii_bus
  atl1: Do not enumerate options unsupported by chip
  atl1e: fix broken multicast by removing unnecessary crc inversion
  gianfar: Fix DMA unmap invocations
  net/ucc_geth: Fix oops in uec_get_ethtool_stats()
  ...

10 years agosched, signals: fix the racy usage of ->signal in account_group_xxx/run_posix_cpu_timers
Oleg Nesterov [Mon, 17 Nov 2008 14:39:47 +0000]
sched, signals: fix the racy usage of ->signal in account_group_xxx/run_posix_cpu_timers

Impact: fix potential NULL dereference

Contrary to ad474caca3e2a0550b7ce0706527ad5ab389a4d4 changelog, other
acct_group_xxx() helpers can be called after exit_notify() by timer tick.
Thanks to Roland for pointing out this. Somehow I missed this simple fact
when I read the original patch, and I am afraid I confused Frank during
the discussion. Sorry.

Fortunately, these helpers work with current, we can check ->exit_state
to ensure that ->signal can't go away under us.

Also, add the comment and compiler barrier to account_group_exec_runtime(),
to make sure we load ->signal only once.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agoswiotlb: use coherent_dma_mask in alloc_coherent
FUJITA Tomonori [Mon, 17 Nov 2008 07:24:34 +0000]
swiotlb: use coherent_dma_mask in alloc_coherent

Impact: fix DMA buffer allocation coherency bug in certain configs

This patch fixes swiotlb to use dev->coherent_dma_mask in
swiotlb_alloc_coherent().

coherent_dma_mask is a subset of dma_mask (equal to it most of
the time), enumerating the address range that a given device
is able to DMA to/from in a cache-coherent way.

But currently, swiotlb uses dev->dma_mask in alloc_coherent()
implicitly via address_needs_mapping(), but alloc_coherent is really
supposed to use coherent_dma_mask.

This bug could break drivers that uses smaller coherent_dma_mask than
dma_mask (though the current code works for the majority that use the
same mask for coherent_dma_mask and dma_mask).

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: tony.luck@intel.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agortnetlink: propagate error from dev_change_flags in do_setlink()
Johannes Berg [Mon, 17 Nov 2008 07:20:31 +0000]
rtnetlink: propagate error from dev_change_flags in do_setlink()

Unlike ifconfig, iproute doesn't report an error when setting
an interface up fails:

(example: put wireless network mac80211 interface into repeater mode
with iwconfig but do not set a peer MAC address, it should fail with
-ENOLINK)

without patch:
# ip link set wlan0 up ; echo $?
0
#

with patch:
# ip link set wlan0 up ; echo $?
RTNETLINK answers: Link has been severed
2
#

Propagate the return value from dev_change_flags() to fix this.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Tested-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

10 years agoisdn: remove extra byteswap in isdn_net_ciscohdlck_slarp_send_reply
Harvey Harrison [Mon, 17 Nov 2008 07:03:45 +0000]
isdn: remove extra byteswap in isdn_net_ciscohdlck_slarp_send_reply

commit a144ea4b7a13087081ab5402fa9ad0bcfd249e67 [IPV4]: annotate struct in_ifaddr

Missed this extra byteswap as the isdn inlines hide the htonl inside
put_u32 which causes an extra byteswap on little-endian arches.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

10 years ago[CIFS] Fix build break
Steve French [Mon, 17 Nov 2008 03:57:13 +0000]
[CIFS] Fix build break

Signed-off-by: Steve French <sfrench@us.ibm.com>

10 years agoPhonet: refuse to send bigger than MTU packets
Rémi Denis-Courmont [Mon, 17 Nov 2008 03:48:49 +0000]
Phonet: refuse to send bigger than MTU packets

Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

10 years agocifs: reinstate sharing of tree connections
Jeff Layton [Sat, 15 Nov 2008 16:12:47 +0000]
cifs: reinstate sharing of tree connections

Use a similar approach to the SMB session sharing. Add a list of tcons
attached to each SMB session. Move the refcount to non-atomic. Protect
all of the above with the cifs_tcp_ses_lock. Add functions to
properly find and put references to the tcons.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>

10 years agoe1000e: fix IPMI traffic
Jeff Kirsher [Fri, 14 Nov 2008 06:45:23 +0000]
e1000e: fix IPMI traffic

Some users reported that they have machines with BMCs enabled that cannot
receive IPMI traffic after e1000e is loaded.
http://marc.info/?l=e1000-devel&m=121909039127414&w=2
http://marc.info/?l=e1000-devel&m=121365543823387&w=2

This fixes the issue if they load with the new parameter = 0 by disabling
crc stripping, but leaves the performance feature on for most users.
Based on work done by Hong Zhang.

Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

10 years agoe1000e: fix warn_on reload after phy_id error
Jeff Kirsher [Fri, 14 Nov 2008 06:45:07 +0000]
e1000e: fix warn_on reload after phy_id error

If the driver fails to initialize the first time due to the failure in the
phy_id check the kernel triggers a warn_on on the second try to load the
driver because the driver did not free the msi/x resources in the first
load because of the previous failure in phy_id check.

Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

10 years agounitialized return value in mm/mlock.c: __mlock_vma_pages_range()
Helge Deller [Sun, 16 Nov 2008 23:30:57 +0000]
unitialized return value in mm/mlock.c: __mlock_vma_pages_range()

Fix an unitialized return value when compiling on parisc (with CONFIG_UNEVICTABLE_LRU=y):
mm/mlock.c: In function `__mlock_vma_pages_range':
mm/mlock.c:165: warning: `ret' might be used uninitialized in this function

Signed-off-by: Helge Deller <deller@gmx.de>
[ It isn't ever really used uninitialized, since no caller should ever
  call this function with an empty range.  But the compiler is correct
  that from a local analysis standpoint that is impossible to see, and
  fixing the warning is appropriate.  ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agostop_machine: fix race with return value (fixes Bug #11989)
Rusty Russell [Sun, 16 Nov 2008 21:52:18 +0000]
stop_machine: fix race with return value (fixes Bug #11989)

Bug #11989: Suspend failure on NForce4-based boards due to chanes in
stop_machine

We should not access active.fnret outside the lock; in theory the next
stop_machine could overwrite it.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Tested-by: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoFix broken ownership of /proc/sys/ files
Al Viro [Sun, 16 Nov 2008 22:19:10 +0000]
Fix broken ownership of /proc/sys/ files

D'oh...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Reported-and-tested-by: Peter Palfrader <peter@palfrader.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agomfd: Correct WM8350 I2C return code usage
Mark Brown [Wed, 12 Nov 2008 16:34:02 +0000]
mfd: Correct WM8350 I2C return code usage

The vendor BSP used for the WM8350 development provided an I2C driver
which incorrectly returned zero on succesful sends rather than the
number of transmitted bytes, an error which was then propagated into the
WM8350 I2C accessors.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>

10 years agomfd: fix event masking for da9030
Mike Rapoport [Sat, 8 Nov 2008 00:28:19 +0000]
mfd: fix event masking for da9030

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>

10 years agoacpi: fix oops in acpi_system_wakeup_device_seq_show
Linus Torvalds [Sun, 16 Nov 2008 18:09:34 +0000]
acpi: fix oops in acpi_system_wakeup_device_seq_show

Commit 0794469da3f7b2093575cbdfc1108308dd3641ce: ("ACPI: struct device -
replace bus_id with dev_name(), dev_set_name()") introduced a bug by
testing 'dev_name(ldev)' instead of 'ldev->bus' for NULL when printing
out the bus information.

So if ldev->bus was NULL, we'd oops.

Reported-and-tested-by: Bruno Prémont <bonbons@linux-vserver.org>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Len Brown <len.brown@intel.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agophy: fix phy address bug
Giulio Benetti [Thu, 13 Nov 2008 21:53:13 +0000]
phy: fix phy address bug

PHYID returns 0xffff and not 0xffffffff when not found and in some
case(at91sam9263) 0x0. Maybe this patch could be useful.

Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: David S. Miller <davem@davemloft.net>