8 years agoperf, arch: Cleanup perf-pmu init vs lockup-detector
Peter Zijlstra [Thu, 25 Nov 2010 17:38:29 +0000]
perf, arch: Cleanup perf-pmu init vs lockup-detector

The perf hardware pmu got initialized at various points in the boot,
some before early_initcall() some after (notably arch_initcall).

The problem is that the NMI lockup detector is ran from early_initcall()
and expects the hardware pmu to be present.

Sanitize this by moving all architecture hardware pmu implementations to
initialize at early_initcall() and move the lockup detector to an explicit
initcall right after that.

Cc: paulus <paulus@samba.org>
Cc: davem <davem@davemloft.net>
Cc: Michael Cree <mcree@orcon.net.nz>
Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1290707759.2145.119.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

8 years agox86: Set cpu masks before calling CPU_STARTING notifiers
Andi Kleen [Thu, 18 Nov 2010 10:47:31 +0000]
x86: Set cpu masks before calling CPU_STARTING notifiers

When booting up a CPU set the various topology masks before
calling the CPU_STARTING notifier. This way the notifier
can actually use the masks.

This is needed for a perf change.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1290077254-12165-2-git-send-email-andi@firstfloor.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

8 years agoperf: Ignore non-sampling overflows
Peter Zijlstra [Wed, 24 Nov 2010 17:55:29 +0000]
perf: Ignore non-sampling overflows

Some arch implementations call perf_event_overflow() by 'accident',
ignore this.

Reported-by: Francis Moreau <francis.moro@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

8 years agoperf: Don't bother to init the hrtimer for no SW sampling counters
Franck Bui-Huu [Tue, 23 Nov 2010 15:21:45 +0000]
perf: Don't bother to init the hrtimer for no SW sampling counters

Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1290525705-6265-3-git-send-email-fbuihuu@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

8 years agoperf: Limit event refresh to sampling event
Franck Bui-Huu [Tue, 23 Nov 2010 15:21:44 +0000]
perf: Limit event refresh to sampling event

Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1290525705-6265-2-git-send-email-fbuihuu@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

8 years agoperf: Introduce is_sampling_event()
Franck Bui-Huu [Tue, 23 Nov 2010 15:21:43 +0000]
perf: Introduce is_sampling_event()

and use it when appropriate.

Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1290525705-6265-1-git-send-email-fbuihuu@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

8 years agoscripts/tags.sh: Add magic for trace-events
Peter Zijlstra [Wed, 24 Nov 2010 09:43:55 +0000]
scripts/tags.sh: Add magic for trace-events

Make tags find the trace-event definitions

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
LKML-Reference: <1290591835.2072.438.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

8 years agoMerge branch 'perf/urgent' into perf/core
Ingo Molnar [Fri, 26 Nov 2010 14:07:02 +0000]
Merge branch 'perf/urgent' into perf/core

Conflicts:
arch/x86/kernel/apic/hw_nmi.c

Merge reason: Resolve conflict, queue up dependent patch.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

8 years agoMerge commit 'v2.6.37-rc3' into perf/core
Ingo Molnar [Fri, 26 Nov 2010 14:04:42 +0000]
Merge commit 'v2.6.37-rc3' into perf/core

Merge reason: Pick up latest fixes.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

8 years agoperf: Fix the software context switch counter
Peter Zijlstra [Fri, 26 Nov 2010 12:49:04 +0000]
perf: Fix the software context switch counter

Stephane noticed that because the perf_sw_event() call is inside the
perf_event_task_sched_out() call it won't get called unless we
have a per-task counter.

Reported-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

8 years agoperf, x86: Fixup Kconfig deps
Peter Zijlstra [Tue, 16 Nov 2010 20:49:01 +0000]
perf, x86: Fixup Kconfig deps

This leads to a Kconfig dep inversion, x86 selects PERF_EVENT (due to
a hw_breakpoint dep) but doesn't unconditionally provide
HAVE_PERF_EVENT.

(This can cause build failures on M386/M486 kernel .config's.)

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20101117222055.982965150@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

8 years agox86, perf, nmi: Disable perf if counters are not accessible
Don Zickus [Mon, 22 Nov 2010 21:55:23 +0000]
x86, perf, nmi: Disable perf if counters are not accessible

In a kvm virt guests, the perf counters are not emulated.  Instead they
return zero on a rdmsrl. The perf nmi handler uses the fact that crossing
a zero means the counter overflowed (for those counters that do not have
specific interrupt bits). Therefore on kvm guests, perf will swallow all
NMIs thinking the counters overflowed.

This causes problems for subsystems like kgdb which needs NMIs to do its
magic. This problem was discovered by running kgdb tests.

The solution is to write garbage into a perf counter during the
initialization and hopefully reading back the same number.  On kvm
guests, the value will be read back as zero and we disable perf as
a result.

Reported-by: Jason Wessel <jason.wessel@windriver.com>
Patch-inspired-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <1290462923-30734-1-git-send-email-dzickus@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

8 years agoperf: Fix inherit vs. context rotation bug
Thomas Gleixner [Wed, 24 Nov 2010 09:05:55 +0000]
perf: Fix inherit vs. context rotation bug

It was found that sometimes children of tasks with inherited events had
one extra event. Eventually it turned out to be due to the list rotation
no being exclusive with the list iteration in the inheritance code.

Cure this by temporarily disabling the rotation while we inherit the events.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Cc: <stable@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

8 years agoperf bench: Add feature that measures the performance of the arch/x86/lib/memcpy_64...
Hitoshi Mitake [Thu, 25 Nov 2010 07:04:53 +0000]
perf bench: Add feature that measures the performance of the arch/x86/lib/memcpy_64.S memcpy routines via 'perf bench mem'

This patch ports arch/x86/lib/memcpy_64.S to perf bench mem
memcpy for benchmarking memcpy() in userland with tricky and
dirty way.

util/include/asm/cpufeature.h, util/include/asm/dwarf2.h, and
util/include/linux/linkage.h are mostly dummy files with small
wrappers, so that we are able to include memcpy_64.S
unmodified.

Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: h.mitake@gmail.com
Cc: Miao Xie <miaox@cn.fujitsu.com>
Cc: Ma Ling <ling.ma@intel.com>
Cc: Zhao Yakui <yakui.zhao@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Andi Kleen <andi@firstfloor.org>
LKML-Reference: <1290668693-27068-2-git-send-email-mitake@dcl.info.waseda.ac.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

8 years agoperf bench: Print both of prefaulted and no prefaulted results by default
Hitoshi Mitake [Thu, 25 Nov 2010 07:04:52 +0000]
perf bench: Print both of prefaulted and no prefaulted results by default

After applying this patch, perf bench mem memcpy prints
both of prefualted and without prefaulted score of memcpy().

New options --no-prefault and --only-prefault are added
to print single result, mainly for scripting usage.

Usage example:

 | mitake@X201i:~/linux/.../tools/perf% ./perf bench mem memcpy -l 500MB
 | # Running mem/memcpy benchmark...
 | # Copying 500MB Bytes ...
 |
 |      634.969014 MB/Sec
 |        4.828062 GB/Sec (with prefault)
 | mitake@X201i:~/linux/.../tools/perf% ./perf bench mem memcpy -l 500MB --only-prefault
 | # Running mem/memcpy benchmark...
 | # Copying 500MB Bytes ...
 |
 |        4.705192 GB/Sec (with prefault)
 | mitake@X201i:~/linux/.../tools/perf% ./perf bench mem memcpy -l 500MB --no-prefault
 | # Running mem/memcpy benchmark...
 | # Copying 500MB Bytes ...
 |
 |      642.725568 MB/Sec

Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: h.mitake@gmail.com
Cc: Miao Xie <miaox@cn.fujitsu.com>
Cc: Ma Ling <ling.ma@intel.com>
Cc: Zhao Yakui <yakui.zhao@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Andi Kleen <andi@firstfloor.org>
LKML-Reference: <1290668693-27068-1-git-send-email-mitake@dcl.info.waseda.ac.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

8 years agoperf symbols: Remove incorrect open-coded container_of()
Rabin Vincent [Tue, 23 Nov 2010 16:38:18 +0000]
perf symbols: Remove incorrect open-coded container_of()

At least on ARM, padding is inserted between rb_node and sym in struct
symbol_name_rb_node, causing "((void *)sym) - sizeof(struct rb_node)" to
point inside rb_node rather than to the symbol_name_rb_node.  Fix this
by converting the code to use container_of().

Cc: Ian Munsie <imunsie@au1.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Ming Lei <tom.leiming@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <20101123163106.GA25677@debian>
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

8 years agoperf record: Handle restrictive permissions in /proc/{kallsyms,modules}
Arnaldo Carvalho de Melo [Mon, 22 Nov 2010 16:01:55 +0000]
perf record: Handle restrictive permissions in /proc/{kallsyms,modules}

The 59365d1 commit, even being reverted by 33e0d57, showed a non robust
behavior in 'perf record': it really should just warn the user that some
functionality will not be available.

The new behavior then becomes:

[acme@felicio linux]$ ls -la /proc/{kallsyms,modules}
-r-------- 1 root root 0 Nov 22 12:19 /proc/kallsyms
-r-------- 1 root root 0 Nov 22 12:19 /proc/modules
[acme@felicio linux]$ perf record ls -R > /dev/null
Couldn't record kernel reference relocation symbol
Symbol resolution may be skewed if relocation was used (e.g. kexec).
Check /proc/kallsyms permission or run as root.
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.004 MB perf.data (~161 samples) ]
[acme@felicio linux]$ perf report --stdio
[kernel.kallsyms] with build id 77b05e00e64e4de1c9347d83879779b540d69f00 not found, continuing without symbols
# Events: 98  cycles
#
# Overhead  Command    Shared Object                Symbol
# ........  .......  ...............  ....................
#
    48.26%       ls  [kernel]         [k] ffffffff8102b92b
    22.49%       ls  libc-2.12.90.so  [.] __strlen_sse2
     8.35%       ls  libc-2.12.90.so  [.] __GI___strcoll_l
     8.17%       ls  ls               [.]            11580
     3.35%       ls  libc-2.12.90.so  [.] _IO_new_file_xsputn
     3.33%       ls  libc-2.12.90.so  [.] _int_malloc
     1.88%       ls  libc-2.12.90.so  [.] _int_free
     0.84%       ls  libc-2.12.90.so  [.] malloc_consolidate
     0.84%       ls  libc-2.12.90.so  [.] __readdir64
     0.83%       ls  ls               [.] strlen@plt
     0.83%       ls  libc-2.12.90.so  [.] __GI_fwrite_unlocked
     0.83%       ls  libc-2.12.90.so  [.] __memcpy_sse2

#
# (For a higher level overview, try: perf report --sort comm,dso)
#
[acme@felicio linux]$

It still has the build-ids for DSOs in the maps with hits:

[acme@felicio linux]$ perf buildid-list
77b05e00e64e4de1c9347d83879779b540d69f00 [kernel.kallsyms]
09c4a431a4a8b648fcfc2c2bdda70f56050ddff1 /bin/ls
af75ea9ad951d25e0f038901a11b3846dccb29a4 /lib64/libc-2.12.90.so
[acme@felicio linux]$

That can be used in another machine to resolve kernel symbols.

Cc: Eugene Teo <eugeneteo@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jesper Juhl <jj@chaosbits.net>
Cc: Marcus Meissner <meissner@suse.de>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

8 years agoLinux 2.6.37-rc3
Linus Torvalds [Sun, 21 Nov 2010 23:18:56 +0000]
Linux 2.6.37-rc3

8 years agoperf stat: Change and clean up sys_perf_event_open error handling
Corey Ashford [Sat, 20 Nov 2010 01:37:24 +0000]
perf stat: Change and clean up sys_perf_event_open error handling

This patch makes several changes to "perf stat":

- "perf stat" will no longer go ahead and run the application when one or
more of the specified events could not be opened.
- Use error() and die() instead of pr_err() so that the output is more
consistent with "perf top" and "perf record".
- Handle permission errors in a more robust way, and in a similar way to
"perf record" and "perf top".

In addition, the sys_perf_event_open() error handling of "perf top" and "perf
record" is made more consistent and adds the following phrase when an event
doesn't open (with something ther than an access or permission error):

"/bin/dmesg may provide additional information."

This is added because kernel code doesn't have a good way of expressing
detailed errors to user space, so its only avenue is to use printk's.  However,
many users may not think of looking at dmesg to find out why an event is being
rejected.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <fweisbec@gmail.com>
Cc: Ian Munsie <ianmunsi@au1.ibm.com>
Cc: Michael Ellerman <michaele@au1.ibm.com>
LKML-Reference: <1290217044-26293-1-git-send-email-cjashfor@linux.vnet.ibm.com>
Signed-off-by: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

8 years agoMerge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Linus Torvalds [Sat, 20 Nov 2010 03:46:45 +0000]
Merge branch 'for_linus' of git://git./linux/kernel/git/tytso/ext4

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: Add EXT4_IOC_TRIM ioctl to handle batched discard
  fs: Do not dispatch FITRIM through separate super_operation
  ext4: ext4_fill_super shouldn't return 0 on corruption
  jbd2: fix /proc/fs/jbd2/<dev> when using an external journal
  ext4: missing unlock in ext4_clear_request_list()
  ext4: fix setting random pages PageUptodate

8 years agoext4: Add EXT4_IOC_TRIM ioctl to handle batched discard
Lukas Czerner [Sat, 20 Nov 2010 02:47:07 +0000]
ext4: Add EXT4_IOC_TRIM ioctl to handle batched discard

Filesystem independent ioctl was rejected as not common enough to be in
core vfs ioctl. Since we still need to access to this functionality this
commit adds ext4 specific ioctl EXT4_IOC_TRIM to dispatch
ext4_trim_fs().

It takes fstrim_range structure as an argument. fstrim_range is definec in
the include/linux/fs.h and its definition is as follows.

struct fstrim_range {
__u64 start;
__u64 len;
__u64 minlen;
}

start - first Byte to trim
len - number of Bytes to trim from start
minlen - minimum extent length to trim, free extents shorter than this
  number of Bytes will be ignored. This will be rounded up to fs
  block size.

After the FITRIM is done, the number of actually discarded Bytes is stored
in fstrim_range.len to give the user better insight on how much storage
space has been really released for wear-leveling.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

8 years agofs: Do not dispatch FITRIM through separate super_operation
Lukas Czerner [Sat, 20 Nov 2010 02:18:35 +0000]
fs: Do not dispatch FITRIM through separate super_operation

There was concern that FITRIM ioctl is not common enough to be included
in core vfs ioctl, as Christoph Hellwig pointed out there's no real point
in dispatching this out to a separate vector instead of just through
->ioctl.

So this commit removes ioctl_fstrim() from vfs ioctl and trim_fs
from super_operation structure.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

8 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph...
Linus Torvalds [Fri, 19 Nov 2010 23:32:22 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/sage/ceph-client

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  ceph: fix readdir EOVERFLOW on 32-bit archs
  ceph: fix frag offset for non-leftmost frags
  ceph: fix dangling pointer
  ceph: explicitly specify page alignment in network messages
  ceph: make page alignment explicit in osd interface
  ceph: fix comment, remove extraneous args
  ceph: fix update of ctime from MDS
  ceph: fix version check on racing inode updates
  ceph: fix uid/gid on resent mds requests
  ceph: fix rdcache_gen usage and invalidate
  ceph: re-request max_size if cap auth changes
  ceph: only let auth caps update max_size
  ceph: fix open for write on clustered mds
  ceph: fix bad pointer dereference in ceph_fill_trace
  ceph: fix small seq message skipping
  Revert "ceph: update issue_seq on cap grant"

8 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Fri, 19 Nov 2010 23:25:59 +0000]
Merge git://git./linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (31 commits)
  net: fix kernel-doc for sk_filter_rcu_release
  be2net: Fix to avoid firmware update when interface is not open.
  netfilter: fix IP_VS dependencies
  net: irda: irttp: sync error paths of data- and udata-requests
  ipv6: Expose reachable and retrans timer values as msecs
  ipv6: Expose IFLA_PROTINFO timer values in msecs instead of jiffies
  3c59x: fix build failure on !CONFIG_PCI
  ipg.c: remove id [SUNDANCE, 0x1021]
  net: caif: spi: fix potential NULL dereference
  ath9k_htc: Avoid setting QoS control for non-QoS frames
  net: zero kobject in rx_queue_release
  net: Fix duplicate volatile warning.
  MAINTAINERS: Add stmmac maintainer
  bonding: fix a race in IGMP handling
  cfg80211: fix can_beacon_sec_chan, reenable HT40
  gianfar: fix signedness issue
  net: bnx2x: fix error value sign
  8139cp: fix checksum broken
  r8169: fix checksum broken
  rds: Integer overflow in RDS cmsg handling
  ...

8 years agoMerge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzi...
Linus Torvalds [Fri, 19 Nov 2010 19:59:49 +0000]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/jgarzik/libata-dev

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  sata_via: apply magic FIFO fix to vt6420 too

8 years agoRevert "kernel: make /proc/kallsyms mode 400 to reduce ease of attacking"
Linus Torvalds [Fri, 19 Nov 2010 19:54:40 +0000]
Revert "kernel: make /proc/kallsyms mode 400 to reduce ease of attacking"

This reverts commit 59365d136d205cc20fe666ca7f89b1c5001b0d5a.

It turns out that this can break certain existing user land setups.
Quoth Sarah Sharp:

 "On Wednesday, I updated my branch to commit 460781b from linus' tree,
  and my box would not boot.  klogd segfaulted, which stalled the whole
  system.

  At first I thought it actually hung the box, but it continued booting
  after 5 minutes, and I was able to log in.  It dropped back to the
  text console instead of the graphical bootup display for that period
  of time.  dmesg surprisingly still works.  I've bisected the problem
  down to this commit (commit 59365d136d205cc20fe666ca7f89b1c5001b0d5a)

  The box is running klogd 1.5.5ubuntu3 (from Jaunty).  Yes, I know
  that's old.  I read the bit in the commit about changing the
  permissions of kallsyms after boot, but if I can't boot that doesn't
  help."

So let's just keep the old default, and encourage distributions to do
the "chmod -r /proc/kallsyms" in their bootup scripts.  This is not
worth a kernel option to change default behavior, since it's so easily
done in user space.

Reported-and-bisected-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: Marcus Meissner <meissner@suse.de>
Cc: Tejun Heo <tj@kernel.org>
Cc: Eugene Teo <eugeneteo@kernel.org>
Cc: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoperf tools: Change my maintainer address
Arnaldo Carvalho de Melo [Fri, 19 Nov 2010 18:46:26 +0000]
perf tools: Change my maintainer address

Also remove old snail mail address from CREDITS, moved years ago.

LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

8 years agoperf tools: Remove hardcoded include paths for elfutils
Robert Morell [Tue, 16 Nov 2010 22:16:33 +0000]
perf tools: Remove hardcoded include paths for elfutils

This change removes the use of hardcoded absolute "/usr/include/elfutils" paths
from the perf build.  The problem with hardcoded paths is that it prevents them
from being overridden by $prefix or by -I in CFLAGS (e.g., for cross-compiling
purposes).

Instead, just include the "elfutils/" subdirectory as a relative path when
files are needed from that directory.

Tested by building perf:
- Cross-compiled for ARM on x86_64
- Built natively on x86_64
- Built on x86_64 with /usr/include/elfutils moved to another location
  and manually included in CFLAGS

Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
LKML-Reference: <1289945793-31441-1-git-send-email-rmorell@nvidia.com>
Signed-off-by: Robert Morell <rmorell@nvidia.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

8 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Linus Torvalds [Fri, 19 Nov 2010 18:31:04 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: fix typo in keycode validation supporting large scancodes
  Input: aiptek - tighten up permissions on sysfs attributes
  Input: sysrq - pass along lone Alt + SysRq

8 years agoMerge branch 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ickle...
Linus Torvalds [Fri, 19 Nov 2010 18:28:13 +0000]
Merge branch 'drm-intel-fixes' of git://git./linux/kernel/git/ickle/drm-intel

* 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel:
  drm/i915: Disable FBC on Ironlake to save 1W
  drm/i915: Take advantage of auto-polling CRT hotplug detection on PCH hardware
  drm/i915/crt: Introduce struct intel_crt
  drm/i915: Do not hold mutex when faulting in user addresses
  drm: radeon: fix error value sign
  drm/radeon/kms: fix and unify tiled buffer alignment checking for r6xx/7xx
  drm/i915: Retire any pending operations on the old scanout when switching
  drm/i915: Fix I2C adapter registration

8 years agoMerge branch 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied...
Linus Torvalds [Fri, 19 Nov 2010 18:27:57 +0000]
Merge branch 'drm-fixes' of git://git./linux/kernel/git/airlied/drm-2.6

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (40 commits)
  drm/radeon/kms: i2c s/sprintf/snprintf/g for safety
  drm/radeon/kms: fix i2c pad masks on rs4xx
  drm/ttm: Fix up a theoretical deadlock
  drm/radeon/kms: fix tiling info on evergreen
  drm/radeon/kms: fix alignment when allocating buffers
  drm/vmwgfx: Fix up an error path during bo creation
  drm/radeon/kms: register an i2c adapter name for the dp aux bus
  drm/radeon/kms/atom: add proper external encoders support
  drm/radeon/kms/atom: cleanup and unify DVO handling
  drm/radeon/kms: properly power up/down the eDP panel as needed (v4)
  drm/radeon/kms/atom: set sane defaults in atombios_get_encoder_mode()
  drm/radeon/kms: turn the backlight off explicitly for dpms
  drm/radeon/kms: fix typo in r600 cs checker
  drm: radeon: fix error value sign
  drm/radeon/kms: fix and unify tiled buffer alignment checking for r6xx/7xx
  nouveau: Acknowledge HPD irq in handler, not bottom half
  drm/nouveau: Fix a few confusions between "chipset" and "card_type".
  drm/nouveau: don't expose backlight control when available through ACPI
  drm/nouveau/pm: improve memtiming mappings
  drm/nouveau: Make PCIE GART size depend on the available RAMIN space.
  ...

8 years agoperf stat: Add no-aggregation mode to -a
Stephane Eranian [Tue, 16 Nov 2010 09:05:01 +0000]
perf stat: Add no-aggregation mode to -a

This patch adds a new -A option to perf stat. If specified then perf stat does
not aggregate counts across all monitored CPUs in system-wide mode, i.e., when
using -a. This option is not supported in per-thread mode.

Being able to get a per-cpu breakdown is useful to detect imbalances between
CPUs when running a uniform workload than spans all monitored CPUs.

The second version corrects the missing cpumap[] support, so that it works when
the -C option is used.

The third version fixes a missing cpumap[] in print_counter() and removes a
stray patch in builtin-trace.c.

Examples on a 4-way system:

# perf stat -a   -e cycles,instructions -- sleep 1
 Performance counter stats for 'sleep 1':
         9592808135  cycles
         3490380006  instructions             #      0.364 IPC
        1.001584632  seconds time elapsed

# perf stat -a -A -e cycles,instructions -- sleep 1
 Performance counter stats for 'sleep 1':
CPU0            2398163767  cycles
CPU1            2398180817  cycles
CPU2            2398217115  cycles
CPU3            2398247483  cycles
CPU0             872282046  instructions             #      0.364 IPC
CPU1             873481776  instructions             #      0.364 IPC
CPU2             872638127  instructions             #      0.364 IPC
CPU3             872437789  instructions             #      0.364 IPC
        1.001556052  seconds time elapsed

Cc: David S. Miller <davem@davemloft.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
LKML-Reference: <4ce257b5.1e07e30a.7b6b.3aa9@mx.google.com>
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

8 years agosata_via: apply magic FIFO fix to vt6420 too
Tejun Heo [Fri, 19 Nov 2010 14:29:19 +0000]
sata_via: apply magic FIFO fix to vt6420 too

vt6420 has the same FIFO overflow problem as vt6421 when combined with
certain devices.  This patch applies the magic fix to vt6420 too.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Martin Qvist <q@maq.dk>
Reported-by: Peter Zijlstra <peterz@infradead.org>
Cc: Joseph Chan <JosephChan@via.com.tw>
Cc: stable@kernel.org
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

8 years agonet: fix kernel-doc for sk_filter_rcu_release
Randy Dunlap [Thu, 18 Nov 2010 13:02:37 +0000]
net: fix kernel-doc for sk_filter_rcu_release

Fix kernel-doc warning for sk_filter_rcu_release():

Warning(net/core/filter.c:586): missing initial short description on line:
 *  sk_filter_rcu_release: Release a socket filter by rcu_head

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agobe2net: Fix to avoid firmware update when interface is not open.
Sarveshwar Bandi [Thu, 18 Nov 2010 23:44:45 +0000]
be2net: Fix to avoid firmware update when interface is not open.

Since interrupts are enabled only when open is called on the interface,
Attempting a firmware update operation when interface is down could lead to
partial success or failure of operation. This fix fails the request if
netif_running is false.

Signed-off-by: Sarveshwar Bandi <Sarveshwar.Bandi@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoext4: ext4_fill_super shouldn't return 0 on corruption
Darrick J. Wong [Fri, 19 Nov 2010 14:56:44 +0000]
ext4: ext4_fill_super shouldn't return 0 on corruption

At the start of ext4_fill_super, ret is set to -EINVAL, and any failure path
out of that function returns ret.  However, the generic_check_addressable
clause sets ret = 0 (if it passes), which means that a subsequent failure (e.g.
a group checksum error) returns 0 even though the mount should fail.  This
causes vfs_kern_mount in turn to think that the mount succeeded, leading to an
oops.

A simple fix is to avoid using ret for the generic_check_addressable check,
which was last changed in commit 30ca22c70e3ef0a96ff84de69cd7e8561b416cb2.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

8 years agodrm/i915: Disable FBC on Ironlake to save 1W
Alex Shi [Fri, 19 Nov 2010 09:33:55 +0000]
drm/i915: Disable FBC on Ironlake to save 1W

Frame buffer compression is broken on Ironlake due to buggy hardware.
Currently it is disabled through chicken bits, but it still consumes
over 1W more than if we simply never attempt to enable the FBC code
paths.

Signed-off-by: Alex Shi <alex.shi@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org

8 years agodrm/i915: Take advantage of auto-polling CRT hotplug detection on PCH hardware
Keith Packard [Tue, 16 Nov 2010 08:03:53 +0000]
drm/i915: Take advantage of auto-polling CRT hotplug detection on PCH hardware

Both IBX and CPT have an automatic hotplug detection mode which appears to work reliably enough
that we can dispense with the manual force hotplug trigger stuff. This means that
hotplug detection is as simple as reading the current hotplug register values.

The first time the hotplug detection is activated, the code synchronously waits for a hotplug
sequence in case the hardware hasn't bothered to do a detection cycle since being initialized.

Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

8 years agodrm/i915/crt: Introduce struct intel_crt
Chris Wilson [Tue, 16 Nov 2010 10:58:37 +0000]
drm/i915/crt: Introduce struct intel_crt

We will use this structure in future patches to store CRT specific
information on the encoder.

Split out and tweaked from a patch by Keith Packard.

Signed-off-by: Keith Packard <keithp@kithp.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

8 years agodrm/i915: Do not hold mutex when faulting in user addresses
Chris Wilson [Wed, 17 Nov 2010 09:10:42 +0000]
drm/i915: Do not hold mutex when faulting in user addresses

Linus Torvalds found that it was rather trivial to trigger a system
freeze:

  In fact, with lockdep, I don't even need to do the sysrq-d thing: it
  shows the bug as it happens. It's the X server taking the same lock
  recursively.

  Here's the problem:

    =============================================
    [ INFO: possible recursive locking detected ]
    2.6.37-rc2-00012-gbdbd01a #7
    ---------------------------------------------
    Xorg/2816 is trying to acquire lock:
     (&dev->struct_mutex){+.+.+.}, at: [<ffffffff812c626c>] i915_gem_fault+0x50/0x17e

    but task is already holding lock:
     (&dev->struct_mutex){+.+.+.}, at: [<ffffffff812c403b>] i915_mutex_lock_interruptible+0x28/0x4a

    other info that might help us debug this:
    2 locks held by Xorg/2816:
     #0:  (&dev->struct_mutex){+.+.+.}, at: [<ffffffff812c403b>] i915_mutex_lock_interruptible+0x28/0x4a
     #1:  (&mm->mmap_sem){++++++}, at: [<ffffffff81022d4f>] page_fault+0x156/0x37b

This recursion was introduced by rearranging the locking to avoid the
double locking on the fast path (4f27b5d and fbd5a26d) and the
introduction of the prefault to encourage the fast paths (b5e4f2b). In
order to undo the problem, we rearrange the code to perform the access
validation upfront, attempt to prefault and then fight for control of the
mutex.  the best case scenario where the mutex is uncontended the
prefaulting is not wasted.

Reported-and-tested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

8 years agodrm/radeon/kms: i2c s/sprintf/snprintf/g for safety
Alex Deucher [Thu, 18 Nov 2010 16:37:18 +0000]
drm/radeon/kms: i2c s/sprintf/snprintf/g for safety

As per advice from Jean Delvare.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

8 years agodrm/radeon/kms: fix i2c pad masks on rs4xx
Alex Deucher [Thu, 18 Nov 2010 22:18:08 +0000]
drm/radeon/kms: fix i2c pad masks on rs4xx

These got lost in the last i2c cleanup.  Fixes:
https://bugzilla.kernel.org/show_bug.cgi?id=23222

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

8 years agoMerge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzi...
Linus Torvalds [Thu, 18 Nov 2010 23:01:43 +0000]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/jgarzik/libata-dev

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  [libata] remove SCSI host lock and serial number usage from ata_scsi_queuecmd

8 years agoMAINTAINERS: update documentation entries
Randy Dunlap [Thu, 18 Nov 2010 20:27:37 +0000]
MAINTAINERS: update documentation entries

Update kernel-doc and Documentation maintainers info.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoDocumentation/development-process: more staging info
Andres Salomon [Thu, 18 Nov 2010 20:27:36 +0000]
Documentation/development-process: more staging info

Document things that I would've liked to have known when submitting a driver
to gregkh for staging.

Signed-off-by: Andres Salomon <dilinger@queued.net>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoDocumentation/development-process: use -next trees instead of staging
Andres Salomon [Thu, 18 Nov 2010 20:27:35 +0000]
Documentation/development-process: use -next trees instead of staging

This is confusing, as we have "staging" trees for drivers/staging.  Call
them -next trees.

Signed-off-by: Andres Salomon <dilinger@queued.net>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoDocumentation: change email address for Hans Koch
Hans J. Koch [Thu, 18 Nov 2010 20:27:34 +0000]
Documentation: change email address for Hans Koch

My old mail address doesn't exist anymore. This changes all occurrences
to my new address.

Signed-off-by: Hans J. Koch <hjk@hansjkoch.de>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoDocumentation/gpio.txt: explain poll/select usage
Bernhard Walle [Thu, 18 Nov 2010 20:27:33 +0000]
Documentation/gpio.txt: explain poll/select usage

Add a bit more information how to use poll(2) on GPIO value files
correctly. For me it was not clear that I need to poll(2) for
POLLPRI|POLLERR or select(2) for exceptfds.

Signed-off-by: Bernhard Walle <walle@corscience.de>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoDocumentation: make configfs example code simpler, clearer
Dan Carpenter [Thu, 18 Nov 2010 20:27:32 +0000]
Documentation: make configfs example code simpler, clearer

If "p" is NULL then it will cause an oops when we pass it to
simple_strtoul().  In this case "p" can not be NULL so I removed the
check.  I also changed the check a little to make it more explicit that
we are testing whether p points to the NUL char.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agokernel-doc: escape xml for structs
Randy Dunlap [Thu, 18 Nov 2010 20:27:31 +0000]
kernel-doc: escape xml for structs

scripts/kernel-doc was leaving unescaped '<', '>', and '&' in
generated xml output for structs.  This causes xml parser errors.
Convert these characters to "&lt;", "&gt;", and "&amp;" as needed
to prevent errors.

Most of the conversion was already done; complete it just before
output.

Documentation/DocBook/device-drivers.xml:41883: parser error : StartTag: invalid element name
#define INPUT_KEYMAP_BY_INDEX (1 << 0)

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agonetfilter: fix IP_VS dependencies
Patrick McHardy [Thu, 18 Nov 2010 08:20:57 +0000]
netfilter: fix IP_VS dependencies

When NF_CONNTRACK is enabled, IP_VS uses conntrack symbols.
Therefore IP_VS can't be linked statically when conntrack
is built modular.

Reported-by: Justin P. Mattock <justinmattock@gmail.com>
Tested-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet: irda: irttp: sync error paths of data- and udata-requests
Wolfram Sang [Tue, 16 Nov 2010 09:40:02 +0000]
net: irda: irttp: sync error paths of data- and udata-requests

irttp_data_request() returns meaningful errorcodes, while irttp_udata_request()
just returns -1 in similar situations. Sync the two and the loglevels of the
accompanying output.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoipv6: Expose reachable and retrans timer values as msecs
Thomas Graf [Wed, 17 Nov 2010 04:12:02 +0000]
ipv6: Expose reachable and retrans timer values as msecs

Expose reachable and retrans timer values in msecs instead of jiffies.
Both timer values are already exposed as msecs in the neighbour table
netlink interface.

The creation timestamp format with increased precision is kept but
cleaned up.

Signed-off-by: Thomas Graf <tgraf@infradead.org>
Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirel...
David S. Miller [Thu, 18 Nov 2010 19:56:09 +0000]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless-2.6

8 years agoFix build failure at cx25821-video driver
Youquan Song [Thu, 18 Nov 2010 23:28:20 +0000]
Fix build failure at cx25821-video driver

Kernel build fail for cx25821-video has depends on smp_lock.h header
file, but the dependency is removed in recent commit 451a3c24b013.

Signed-off-by: Youquan Song <youquan.song@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoMerge branch 'perf/core' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic...
Ingo Molnar [Thu, 18 Nov 2010 19:07:12 +0000]
Merge branch 'perf/core' of git://git./linux/kernel/git/frederic/random-tracing into perf/core

8 years agoipv6: Expose IFLA_PROTINFO timer values in msecs instead of jiffies
Thomas Graf [Wed, 17 Nov 2010 01:44:24 +0000]
ipv6: Expose IFLA_PROTINFO timer values in msecs instead of jiffies

IFLA_PROTINFO exposes timer related per device settings in jiffies.
Change it to expose these values in msecs like the sysctl interface
does.

I did not find any users of IFLA_PROTINFO which rely on any of these
values and even if there are, they are likely already broken because
there is no way for them to reliably convert such a value to another
time format.

Signed-off-by: Thomas Graf <tgraf@infradead.org>
Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agohardirq.h: needs sched.h if using BKL
Linus Torvalds [Thu, 18 Nov 2010 18:56:29 +0000]
hardirq.h: needs sched.h if using BKL

This really isn't the right thing to do, and strictly speaking we should
have the BKL depth count in the thread info right next to the preempt
count.  The two really do go together.

However, since that would involve a patch to all architectures, and the
BKL is finally going away, it's simply not worth the effort to do the
RightThing(tm).  Just re-instate the <linux/sched.h> include that we
used to get accidentally from the smp_lock.h one.

This is all fallout from the same old "BKL: remove extraneous #include
<smp_lock.h>" commit.

Reported-by: Ingo Molnar <mingo@elte.hu>
Tested-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years ago3c59x: fix build failure on !CONFIG_PCI
Namhyung Kim [Tue, 16 Nov 2010 05:27:51 +0000]
3c59x: fix build failure on !CONFIG_PCI

VORTEX_PCI() could return NULL so it needs to be casted before
accessing any member of struct pci_dev. This fixes following
build failure. Likewise VORTEX_EISA() was changed also.

CC [M] drivers/net/3c59x.o
drivers/net/3c59x.c: In function 'acpi_set_WOL':
drivers/net/3c59x.c:3211:39: warning: dereferencing 'void *' pointer
drivers/net/3c59x.c:3211:39: error: request for member 'current_state' in something not a structure or union
make[3]: *** [drivers/net/3c59x.o] Error 1
make[2]: *** [drivers/net/3c59x.o] Error 2
make[1]: *** [sub-make] Error 2
make: *** [all] Error 2

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoipg.c: remove id [SUNDANCE, 0x1021]
Ken Kawasaki [Sat, 13 Nov 2010 13:42:08 +0000]
ipg.c: remove id [SUNDANCE, 0x1021]

ipg.c:
  The id [SUNDANCE, 0x1021] (=[0x13f0, 0x1021]) is defined
  at dl2k.h and ipg.c.
  But this device works better with dl2k driver.

  This problem is similar with the commit
  [25cca5352712561fba97bd37c495593d641c1d39
  ipg: Remove device claimed by dl2k from pci id table]
  at 11 Feb 2010.

Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet: caif: spi: fix potential NULL dereference
Vasiliy Kulikov [Thu, 18 Nov 2010 18:35:58 +0000]
net: caif: spi: fix potential NULL dereference

alloc_netdev() is not checked here for NULL return value.  dev is
check instead.  It might lead to NULL dereference of ndev.

Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoath9k_htc: Avoid setting QoS control for non-QoS frames
Rajkumar Manoharan [Thu, 18 Nov 2010 06:49:52 +0000]
ath9k_htc: Avoid setting QoS control for non-QoS frames

Setting tid information in the TX header is required only for QoS
frames. Not handling this case causes severe data loss with some APs.

Cc: stable@kernel.org
Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agoMerge branch 'kvm-updates/2.6.37' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Linus Torvalds [Thu, 18 Nov 2010 17:45:47 +0000]
Merge branch 'kvm-updates/2.6.37' of git://git./virt/kvm/kvm

* 'kvm-updates/2.6.37' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: VMX: Fix host userspace gsbase corruption
  KVM: Correct ordering of ldt reload wrt fs/gs reload

8 years agonet: zero kobject in rx_queue_release
John Fastabend [Tue, 16 Nov 2010 19:42:53 +0000]
net: zero kobject in rx_queue_release

netif_set_real_num_rx_queues() can decrement and increment
the number of rx queues. For example ixgbe does this as
features and offloads are toggled. Presumably this could
also happen across down/up on most devices if the available
resources changed (cpu offlined).

The kobject needs to be zero'd in this case so that the
state is not preserved across kobject_put()/kobject_init_and_add().

This resolves the following error report.

ixgbe 0000:03:00.0: eth2: NIC Link is Up 10 Gbps, Flow Control: RX/TX
kobject (ffff880324b83210): tried to init an initialized object, something is seriously wrong.
Pid: 1972, comm: lldpad Not tainted 2.6.37-rc18021qaz+ #169
Call Trace:
 [<ffffffff8121c940>] kobject_init+0x3a/0x83
 [<ffffffff8121cf77>] kobject_init_and_add+0x23/0x57
 [<ffffffff8107b800>] ? mark_lock+0x21/0x267
 [<ffffffff813c6d11>] net_rx_queue_update_kobjects+0x63/0xc6
 [<ffffffff813b5e0e>] netif_set_real_num_rx_queues+0x5f/0x78
 [<ffffffffa0261d49>] ixgbe_set_num_queues+0x1c6/0x1ca [ixgbe]
 [<ffffffffa0262509>] ixgbe_init_interrupt_scheme+0x1e/0x79c [ixgbe]
 [<ffffffffa0274596>] ixgbe_dcbnl_set_state+0x167/0x189 [ixgbe]

Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet: Fix duplicate volatile warning.
Tetsuo Handa [Thu, 18 Nov 2010 17:40:04 +0000]
net: Fix duplicate volatile warning.

jiffies is defined as "volatile".

  extern unsigned long volatile __jiffy_data jiffies;

ACCESS_ONCE() uses "volatile".
As a result, some compilers warn duplicate `volatile' for ACCESS_ONCE(jiffies).

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoMAINTAINERS: Add stmmac maintainer
Giuseppe Cavallaro [Thu, 18 Nov 2010 17:32:02 +0000]
MAINTAINERS: Add stmmac maintainer

Add STMMAC to the list of supported Ethernet drivers
and myself as maintainer.

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agobonding: fix a race in IGMP handling
Eric Dumazet [Thu, 18 Nov 2010 17:30:42 +0000]
bonding: fix a race in IGMP handling

RCU conversion in IGMP code done in net-next-2.6 raised a race in
__bond_resend_igmp_join_requests().

It iterates in_dev->mc_list without appropriate protection (RTNL, or
read_lock on in_dev->mc_list_lock).

Another cpu might delete an entry while we use it and trigger a fault.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoInput: fix typo in keycode validation supporting large scancodes
Mattia Dongili [Thu, 18 Nov 2010 17:06:43 +0000]
Input: fix typo in keycode validation supporting large scancodes

Check the input_keymap_entry keycode size (u32) instead of the device's
(void*) when validating that keycode value can be stored in the keymap.

Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=22722

Signed-off-by: Mattia Dongili <malattia@linux.it>
Tested-by: Norbert Preining <preining@logic.at>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

8 years agoceph: fix readdir EOVERFLOW on 32-bit archs
Sage Weil [Thu, 18 Nov 2010 17:15:07 +0000]
ceph: fix readdir EOVERFLOW on 32-bit archs

One of the readdir filldir_t callers was passing the raw ceph 64-bit ino
instead of the hashed 32-bit one, producing an EOVERFLOW in the filler
callback.  Fix this by calling the ceph_vino_to_ino() helper to do the
conversion.

Reported-by: Jan Smets <jan.smets@alcatel-lucent.com>
Tested-by: Jan Smets <jan.smets@alcatel-lucent.com>
Signed-off-by: Sage Weil <sage@newdream.net>

8 years agocfg80211: fix can_beacon_sec_chan, reenable HT40
Mark Mentovai [Wed, 17 Nov 2010 21:34:37 +0000]
cfg80211: fix can_beacon_sec_chan, reenable HT40

This follows wireless-testing 9236d838c920e90708570d9bbd7bb82d30a38130
("cfg80211: fix extension channel checks to initiate communication") and
fixes accidental case fall-through. Without this fix, HT40 is entirely
blocked.

Signed-off-by: Mark Mentovai <mark@moxienet.com>
Cc: stable@kernel.org
Acked-by: Luis R. Rodriguez <lrodriguez@atheros.com
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agoMerge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel...
Linus Torvalds [Thu, 18 Nov 2010 16:24:58 +0000]
Merge branch 'for_linus' of git://git./linux/kernel/git/jwessel/linux-2.6-kgdb

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb:
  kgdb,ppc: Fix regression in evr register handling
  kgdb,x86: fix regression in detach handling
  kdb: fix crash when KDB_BASE_CMD_MAX is exceeded
  kdb: fix memory leak in kdb_main.c

8 years agoMerge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Linus Torvalds [Thu, 18 Nov 2010 15:38:58 +0000]
Merge branch 'merge' of git://git./linux/kernel/git/benh/powerpc

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc: Update a BKL related comment
  powerpc/mm: Fix module instruction tlb fault handling on Book-E 64
  powerpc: Fix call to subpage_protection()
  powerpc: Set CONFIG_32BIT on ppc32
  powerpc/mm: Fix build error in setup_initial_memory_limit
  powerpc/pseries: Don't override CONFIG_PPC_PSERIES_DEBUG
  powerpc: Fix div64 in bootloader

8 years agotracing: Remove useless syscall ftrace_event_call declaration
Frederic Weisbecker [Thu, 18 Nov 2010 01:21:26 +0000]
tracing: Remove useless syscall ftrace_event_call declaration

It is defined right after, which makes the declaration completely
useless.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Jason Baron <jbaron@redhat.com>

8 years agotracing: Allow syscall trace events for non privileged users
Frederic Weisbecker [Thu, 18 Nov 2010 01:11:42 +0000]
tracing: Allow syscall trace events for non privileged users

As for the raw syscalls events, individual syscall events won't
leak system wide information on task bound tracing. Allow non
privileged users to use them in such workflow.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Jason Baron <jbaron@redhat.com>

8 years agotracing: Allow raw syscall trace events for non privileged users
Frederic Weisbecker [Thu, 18 Nov 2010 00:52:06 +0000]
tracing: Allow raw syscall trace events for non privileged users

This allows non privileged users to use the raw syscall trace events
for task bound tracing in perf.

It is safe because raw syscall trace events don't leak system wide
informations.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Jason Baron <jbaron@redhat.com>

8 years agotracing: New macro to set up initial event flags value
Frederic Weisbecker [Thu, 18 Nov 2010 00:46:57 +0000]
tracing: New macro to set up initial event flags value

This introduces the new TRACE_EVENT_FLAGS() macro in order
to set up initial event flags value.

This macro must simply follow the definition of a trace event
and take the event name and the flag value as parameters:

TRACE_EVENT(my_event, .....
....
);

TRACE_EVENT_FLAGS(my_event, 1)

This will set up 1 as the initial my_event->flags value.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Jason Baron <jbaron@redhat.com>

8 years agotracing: New flag to allow non privileged users to use a trace event
Frederic Weisbecker [Thu, 18 Nov 2010 00:39:17 +0000]
tracing: New flag to allow non privileged users to use a trace event

This adds a new trace event internal flag that allows them to be
used in perf by non privileged users in case of task bound tracing.

This is desired for syscalls tracepoint because they don't leak
global system informations, like some other tracepoints.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Jason Baron <jbaron@redhat.com>

8 years agox86: Eliminate bp argument from the stack tracing routines
Soeren Sandmann Pedersen [Fri, 5 Nov 2010 09:59:39 +0000]
x86: Eliminate bp argument from the stack tracing routines

The various stack tracing routines take a 'bp' argument in which the
caller is supposed to provide the base pointer to use, or 0 if doesn't
have one. Since bp is garbage whenever CONFIG_FRAME_POINTER is not
defined, this means all callers in principle should either always pass
0, or be conditional on CONFIG_FRAME_POINTER.

However, there are only really three use cases for stack tracing:

(a) Trace the current task, including IRQ stack if any
(b) Trace the current task, but skip IRQ stack
(c) Trace some other task

In all cases, if CONFIG_FRAME_POINTER is not defined, bp should just
be 0.  If it _is_ defined, then

- in case (a) bp should be gotten directly from the CPU's register, so
  the caller should pass NULL for regs,

- in case (b) the caller should should pass the IRQ registers to
  dump_trace(),

- in case (c) bp should be gotten from the top of the task's stack, so
  the caller should pass NULL for regs.

Hence, the bp argument is not necessary because the combination of
task and regs is sufficient to determine an appropriate value for bp.

This patch introduces a new inline function stack_frame(task, regs)
that computes the desired bp. This function is then called from the
two versions of dump_stack().

Signed-off-by: Soren Sandmann <ssp@redhat.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arjan van de Ven <arjan@infradead.org>,
Cc: Frederic Weisbecker <fweisbec@gmail.com>,
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>,
LKML-Reference: <m3oc9rop28.fsf@dhcp-100-3-82.bos.redhat.com>>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>

8 years agox86/kprobes: Prevent kprobes to probe on save_args()
Masami Hiramatsu [Thu, 18 Nov 2010 10:16:55 +0000]
x86/kprobes: Prevent kprobes to probe on save_args()

Prevent kprobes to probe on save_args() since this function
will be called from breakpoint exception handler. That will
cause infinit loop on breakpoint handling.

Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: 2nddept-manager@sdl.hitachi.co.jp
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
LKML-Reference: <20101118101655.2779.2816.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

8 years agoirq_work: Drop cmpxchg() result
Sergio Aguirre [Tue, 16 Nov 2010 18:02:47 +0000]
irq_work: Drop cmpxchg() result

The compiler warned us about:

 kernel/irq_work.c: In function 'irq_work_run':
 kernel/irq_work.c:148: warning: value computed is not used

Dropping the cmpxchg() result is indeed weird, but correct -
so annotate away the warning.

Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1289930567-17828-1-git-send-email-saaguirre@ti.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

8 years agoperf: Fix owner-list vs exit
Peter Zijlstra [Tue, 9 Nov 2010 18:01:43 +0000]
perf: Fix owner-list vs exit

Oleg noticed that a perf-fd keeping a reference on the creating task
leads to a few funny side effects.

There's two different aspects to this:

  - kernel based perf-events, these should not take out
    a reference on the creating task and appear on the task's
    event list since they're not bound to fds nor visible
    to userspace.

  - fork() and pthread_create(), these can lead to the creating
    task dying (and thus the task's event-list becomming useless)
    but keeping the list and ref alive until the event is closed.

Combined they lead to malfunction of the ptrace hw_tracepoints.

Cure this by not considering kernel based perf_events for the
owner-list and destroying the owner-list when the owner dies.

Reported-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Oleg Nesterov <oleg@redhat.com>
LKML-Reference: <1289576883.2084.286.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

8 years agoMerge branch 'perf/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic...
Ingo Molnar [Thu, 18 Nov 2010 09:37:51 +0000]
Merge branch 'perf/urgent' of git://git./linux/kernel/git/frederic/random-tracing into perf/urgent

8 years agox86, hw_nmi: Move backtrace_mask declaration under ARCH_HAS_NMI_WATCHDOG
Rakib Mullick [Fri, 12 Nov 2010 14:50:54 +0000]
x86, hw_nmi: Move backtrace_mask declaration under ARCH_HAS_NMI_WATCHDOG

backtrace_mask has been used under the code context of
ARCH_HAS_NMI_WATCHDOG. So put it into that context.
We were warned by the following warning:

  arch/x86/kernel/apic/hw_nmi.c:21: warning: ‘backtrace_mask’ defined but not used

Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com>
Signed-off-by: Don Zickus <dzickus@redhat.com>
LKML-Reference: <1289573455-3410-2-git-send-email-dzickus@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

8 years agox86, nmi_watchdog: Remove all stub function calls from old nmi_watchdog
Don Zickus [Fri, 12 Nov 2010 16:22:24 +0000]
x86, nmi_watchdog: Remove all stub function calls from old nmi_watchdog

Now that the bulk of the old nmi_watchdog is gone, remove all
the stub variables and hooks associated with it.

This touches lots of files mainly because of how the io_apic
nmi_watchdog was implemented.  Now that the io_apic nmi_watchdog
is forever gone, remove all its fingers.

Most of this code was not being exercised by virtue of
nmi_watchdog != NMI_IO_APIC, so there shouldn't be anything to
risky here.

Signed-off-by: Don Zickus <dzickus@redhat.com>
Cc: fweisbec@gmail.com
Cc: gorcunov@openvz.org
LKML-Reference: <1289578944-28564-3-git-send-email-dzickus@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

8 years agox86, nmi_watchdog: Remove the old nmi_watchdog
Don Zickus [Fri, 12 Nov 2010 16:22:23 +0000]
x86, nmi_watchdog: Remove the old nmi_watchdog

Now that we have a new nmi_watchdog that is more generic and
sits on top of the perf subsystem, we really do not need the old
nmi_watchdog any more.

In addition, the old nmi_watchdog doesn't really work if you are
using the default clocksource, hpet.  The old nmi_watchdog code
relied on local apic interrupts to determine if the cpu is still
alive.  With hpet as the clocksource, these interrupts don't
increment any more and the old nmi_watchdog triggers false
postives.

This piece removes the old nmi_watchdog code and stubs out any
variables and functions calls.  The stubs are the same ones used
by the new nmi_watchdog code, so it should be well tested.

Signed-off-by: Don Zickus <dzickus@redhat.com>
Cc: fweisbec@gmail.com
Cc: gorcunov@openvz.org
LKML-Reference: <1289578944-28564-2-git-send-email-dzickus@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

8 years agoMerge branch 'tip/perf/urgent-3' of git://git.kernel.org/pub/scm/linux/kernel/git...
Ingo Molnar [Thu, 18 Nov 2010 07:07:36 +0000]
Merge branch 'tip/perf/urgent-3' of git://git./linux/kernel/git/rostedt/linux-2.6-trace into perf/urgent

8 years agodrm/ttm: Fix up a theoretical deadlock
Thomas Hellstrom [Thu, 11 Nov 2010 09:04:53 +0000]
drm/ttm: Fix up a theoretical deadlock

A process suspended waiting for a higher sequence or no sequence to unreserve,
a bo may be beaten to the reservation by a process with a lower sequence.
In that case the first process should give up trying to reserve and
return -EAGAIN. In order for that to happen, we must wake waiting processes
when we change sequence, so that they have a chance to detect the new
sequence.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

8 years agoMerge remote branch 'nouveau/for-airlied' of /ssd/git/drm-nouveau-next into drm-fixes
Dave Airlie [Thu, 18 Nov 2010 04:57:28 +0000]
Merge remote branch 'nouveau/for-airlied' of /ssd/git/drm-nouveau-next into drm-fixes

* 'nouveau/for-airlied' of /ssd/git/drm-nouveau-next: (25 commits)
  nouveau: Acknowledge HPD irq in handler, not bottom half
  drm/nouveau: Fix a few confusions between "chipset" and "card_type".
  drm/nouveau: don't expose backlight control when available through ACPI
  drm/nouveau/pm: improve memtiming mappings
  drm/nouveau: Make PCIE GART size depend on the available RAMIN space.
  drm/nouveau: Return error from nouveau_gpuobj_new if we're out of RAMIN.
  drm/nouveau: Fix compilation issues in nouveau_pm when CONFIG_HWMON is not set
  drm/nouveau: Don't use load detection for connector polling.
  drm/nv10-nv20: Fix instability after MPLL changes.
  drm/nv50: implement possible workaround for NV86 PGRAPH TLB flush hang
  drm/nouveau: Don't poll LVDS outputs.
  drm/nouveau: Use "force" to decide if analog load detection is ok or not.
  drm/nv04: Fix scanout over the 16MB mark.
  drm/nouveau: fix nv40 pcie gart size
  drm/nva3: fix overflow in fixed point math used for pll calculation
  drm/nv10: Balance RTs expected to be accessed simultaneously by the 3d engine.
  drm/nouveau: Expose some BO usage flags to userspace.
  drm/nouveau: Reduce severity of the unknown getparam error.
  drm/nouveau: Avoid lock dependency between ramht and ramin spinlocks.
  drm/nouveau: Some random cleanups.
  ...

8 years agodrm/radeon/kms: fix tiling info on evergreen
Alex Deucher [Wed, 17 Nov 2010 17:11:03 +0000]
drm/radeon/kms: fix tiling info on evergreen

We aren't currently using tiling in userspace on evergreen,
but the info we currently return for the tiling info query
(gb_addr_config) is no adequate for userspace tiling alignment
calculations.  It does not contain the bank info.  Create a custom
tiling info dword with all the necessary info (num channels,
num banks, group size, row size).

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

8 years agodrm/radeon/kms: fix alignment when allocating buffers
Alex Deucher [Thu, 18 Nov 2010 00:00:26 +0000]
drm/radeon/kms: fix alignment when allocating buffers

We were previously dropping alignment requests on the floor
when allocating buffers so we always ended up page aligned.
Certain tiling modes on 6xx+ require larger alignment which
wasn't happening before.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: Jerome Glisse <j.glisse@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

8 years agodrm/vmwgfx: Fix up an error path during bo creation
Thomas Hellstrom [Wed, 17 Nov 2010 12:24:48 +0000]
drm/vmwgfx: Fix up an error path during bo creation

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

8 years agodrm/radeon/kms: register an i2c adapter name for the dp aux bus
Alex Deucher [Wed, 17 Nov 2010 22:56:49 +0000]
drm/radeon/kms: register an i2c adapter name for the dp aux bus

This causes the connector to not be added since i2c init fails
for the adapter.  Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=31688

Noticed by Ari Savolainen.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: Ari Savolainen <ari.m.savolainen@gmail.com>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

8 years agodrm/radeon/kms/atom: add proper external encoders support
Alex Deucher [Tue, 16 Nov 2010 17:09:42 +0000]
drm/radeon/kms/atom: add proper external encoders support

These are external encoder chips connected via DVO or DP.
The actual external encoder programming is handled by the
kms encoder functions for primary encoder.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

8 years agodrm/radeon/kms/atom: cleanup and unify DVO handling
Alex Deucher [Tue, 16 Nov 2010 17:09:41 +0000]
drm/radeon/kms/atom: cleanup and unify DVO handling

Handle all the various asic family specific things for DVO.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

8 years agodrm/radeon/kms: properly power up/down the eDP panel as needed (v4)
Alex Deucher [Wed, 17 Nov 2010 07:54:42 +0000]
drm/radeon/kms: properly power up/down the eDP panel as needed (v4)

The eDP panel must be powered up for aux transactions, so power it
up for detect and mode probe functions, otherwise power it up or
down based on dpms.

v2:
- only mess with eDP panel on DCE4+
- only mess with eDP panel on eDP connectors, not all DP connectors
v3:
- be extra careful to only mess with eDP panels on eDP connectors
v4:
- avoid possible null derefernce if a connector has not been
assigned to the encoder

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

8 years agodrm/radeon/kms/atom: set sane defaults in atombios_get_encoder_mode()
Alex Deucher [Wed, 17 Nov 2010 07:49:40 +0000]
drm/radeon/kms/atom: set sane defaults in atombios_get_encoder_mode()

If there was no connector mapped to the encoder, atombios_get_encoder_mode()
returned 0 which is the id for DP.  Return something sane instead based on
the encoder id.  This avoids hitting the DP paths on non-DP encoders.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

8 years agodrm/radeon/kms: turn the backlight off explicitly for dpms
Alex Deucher [Tue, 16 Nov 2010 17:09:39 +0000]
drm/radeon/kms: turn the backlight off explicitly for dpms

Seems some newer systems require this explicitly.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

8 years agodrm/radeon/kms: fix typo in r600 cs checker
Alex Deucher [Tue, 16 Nov 2010 21:53:14 +0000]
drm/radeon/kms: fix typo in r600 cs checker

Looks like a typo in:
drm/radeon/r600: fix tiling issues in CS checker.
(f30df2fad0c901e74ac9a52a488a54c69a373a41)

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

8 years agodrm: radeon: fix error value sign
Vasiliy Kulikov [Sun, 14 Nov 2010 20:08:27 +0000]
drm: radeon: fix error value sign

enable_vblank implementations should use negative result to indicate error.
radeon_enable_vblank() returns EINVAL in this case.  Change this to -EINVAL.

Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

8 years agodrm/radeon/kms: fix and unify tiled buffer alignment checking for r6xx/7xx
Alex Deucher [Mon, 15 Nov 2010 01:24:35 +0000]
drm/radeon/kms: fix and unify tiled buffer alignment checking for r6xx/7xx

Tiled buffers have the same alignment requirements regardless of
whether the surface is for db, cb, or textures.  Previously, the
calculations where inconsistent for each buffer type.

- Unify the alignment calculations in a common function
- Standardize the alignment units (pixels for pitch/height/depth,
bytes for base)
- properly check the buffer base alignments

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>