arm: tegra: macallan: set the LDO5 to 2.8V
[linux-2.6.git] / arch / arm / mach-tegra / board-macallan-power.c
2013-05-13 Hunk Lin arm: tegra: macallan: set the LDO5 to 2.8V
2013-05-11 Alex Frid ARM: tegra: dvfs: Add CL-DVFS platform flags
2013-05-10 Kerwin Wan arm: tegra: macallan: only register fuel gauge when...
2013-05-09 Hunk Lin arm: tegra: macallan: set apply_uV for LDOs
2013-05-08 Sivaram Nair ARM: tegra: add macallan psy_depletion board data
2013-05-08 Sivaram Nair ARM: tegra: adding macallan core client
2013-05-08 Sivaram Nair ARM: tegra: add macallan sysedp manager
2013-05-03 Hayden Du ARM: tegra: macallan: Change slew rate of vdd_cpu to...
2013-04-30 Kerwin Wan arm: tegra: macallan: register fuel gauge for E1569
2013-04-26 Hunk Lin arm: tegra: macallan: correct the roof_floors of ldos
2013-04-24 Kerwin Wan arm: tegra: macallan: correct the roof_floor for some...
2013-04-22 Laxman Dewangan ARM: tegra114: set always-on and boot-on if externally...
2013-04-17 Hyongbin Kim arm: tegra: macallan, tegratab: edit bq2419x platform...
2013-04-17 Syed Rafiuddin arm: tegra: macallan: add bq2419x platform data
2013-04-17 Syed Rafiuddin power: bq2419x: Implement WDT timer
2013-04-12 Kerwin Wan arm: tegra: macallan: fix camera power rails on E1569
2013-04-12 Yunfan Zhang ARM: tegra: macallan: enable OTG ID pin detect through...
2013-04-09 Daniel Solomon ARM: tegra: power: Add LP1 cold low voltage parameter
2013-04-09 Hunk Lin arm: tegra: macallan: correct pinmux of vddio_hv bank
2013-04-02 Hunk Lin arm: tegra: macallan: add power detect rails
2013-03-30 Kerwin Wan arm: tegra: macallan: set vdd_rtc to 950mV during lp0
2013-03-28 Laxman Dewangan extcon: palmas: make vbus/ID cable detection to platfor...
2013-03-25 Hunk Lin arm: tegra: macallan: set LDO8's voltage to 0.9V in LP0
2013-03-22 Erik Lilliebjerg arm: tegra: board support for sensors
2013-03-22 Amit Kamath ARM: tegra11: Add voltage capping trip points
2013-03-21 Kerwin Wan arm: tegra: macallan: set initial mode of some smps...
2013-03-19 Hayden Du arm: tegra: macallan: using soc_them as cooling devices...
2013-03-19 Laxman Dewangan ARM: tegra114: remove palmas pad configuration from...
2013-03-19 Laxman Dewangan ARM: tegra11: use palmas pincontrol for pad configuration
2013-03-19 Yunfan Zhang ARM: tegra: macallan: enable vbus power off on suspend
2013-03-19 Diwakar Tundlam arm: tegra: soctherm: Program hotspot offsets specified
2013-03-18 Karthik Ramakrishnan arm: tegra: Board files settings for LP1 Low Core Voltage
2013-03-15 Kerwin Wan ARM: tegra: macallan: vdd_core consumers for sdmmc
2013-03-15 Jinyoung Park arm: tegra: macallan: Enable pid_thermal_gov as default...
2013-03-14 Kerwin Wan arm: tegra: macallan: add regulator for gyro sensor
2013-03-05 Kerwin Wan arm: tegra: macallan: set cpu_lp2_min_residency to...
2013-02-28 Xiaohui Tao arch: arm: macallan: Change analog power for touch
2013-02-19 Diwakar Tundlam ARM: tegra11: Include temperature offset to CPU EDP...
2013-02-18 Charlie Huang ARM: tegra: macallan: bringup e1625 camera board
2013-02-15 Joshua Cha ARM: tegra: macallan: Upgrade CL-DVFS disable output ops
2013-02-15 Joshua Cha ARM: tegra: macallan: sensor: Fix regulator warning
2013-02-14 Hyungwoo Yang ARM: tegra: change thermal parameters
2013-02-08 Nagarjuna Kristam ARM: tegra: macallan: enable support for wl8
2013-02-06 Bo Yan ARM: tegra11x: Define ncpu residency for 2 clusters
2013-02-06 Diwakar Tundlam arm: tegra: soctherm: PMC scratch register config for...
2013-02-05 Hayden Du macallan: add VBUS regulator for macallan
2013-02-05 Kerwin Wan arm: tegra: macallan: Move all tj dependent thermals...
2013-02-02 Kerwin Wan arm: tegra: macallan: create board file