xtensa: ccount clocksource
Johannes Weiner [Wed, 4 Mar 2009 20:39:12 +0000 (21:39 +0100)]
Switch to GENERIC_TIME by using the ccount register as a clock source.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Chris Zankel <chris@zankel.net>

arch/xtensa/Kconfig
arch/xtensa/kernel/time.c

index 7bbc6c1..fa6dc4d 100644 (file)
@@ -48,6 +48,9 @@ config HZ
        int
        default 100
 
+config GENERIC_TIME
+       def_bool y
+
 source "init/Kconfig"
 source "kernel/Kconfig.freezer"
 
index db14a3d..8848120 100644 (file)
@@ -14,6 +14,7 @@
 
 #include <linux/errno.h>
 #include <linux/time.h>
+#include <linux/clocksource.h>
 #include <linux/interrupt.h>
 #include <linux/module.h>
 #include <linux/init.h>
@@ -29,6 +30,26 @@ unsigned long ccount_per_jiffy;              /* per 1/HZ */
 unsigned long nsec_per_ccount;         /* nsec per ccount increment */
 #endif
 
+static cycle_t ccount_read(void)
+{
+       return (cycle_t)get_ccount();
+}
+
+static struct clocksource ccount_clocksource = {
+       .name = "ccount",
+       .rating = 200,
+       .read = ccount_read,
+       .mask = CLOCKSOURCE_MASK(32),
+       /*
+        * With a shift of 22 the lower limit of the cpu clock is
+        * 1MHz, where NSEC_PER_CCOUNT is 1000 or a bit less than
+        * 2^10: Since we have 32 bits and the multiplicator can
+        * already take up as much as 10 bits, this leaves us with
+        * remaining upper 22 bits.
+        */
+       .shift = 22,
+};
+
 static irqreturn_t timer_interrupt(int irq, void *dev_id);
 static struct irqaction timer_irqaction = {
        .handler =      timer_interrupt,
@@ -38,9 +59,11 @@ static struct irqaction timer_irqaction = {
 
 void __init time_init(void)
 {
-       /* The platform must provide a function to calibrate the processor
-        * speed for the CALIBRATE.
-        */
+       xtime.tv_nsec = 0;
+       xtime.tv_sec = read_persistent_clock();
+
+       set_normalized_timespec(&wall_to_monotonic,
+               -xtime.tv_sec, -xtime.tv_nsec);
 
 #ifdef CONFIG_XTENSA_CALIBRATE_CCOUNT
        printk("Calibrating CPU frequency ");
@@ -48,12 +71,10 @@ void __init time_init(void)
        printk("%d.%02d MHz\n", (int)ccount_per_jiffy/(1000000/HZ),
                        (int)(ccount_per_jiffy/(10000/HZ))%100);
 #endif
-
-       xtime.tv_nsec = 0;
-       xtime.tv_sec = read_persistent_clock();
-
-       set_normalized_timespec(&wall_to_monotonic,
-               -xtime.tv_sec, -xtime.tv_nsec);
+       ccount_clocksource.mult =
+               clocksource_hz2mult(CCOUNT_PER_JIFFY * HZ,
+                               ccount_clocksource.shift);
+       clocksource_register(&ccount_clocksource);
 
        /* Initialize the linux timer interrupt. */
 
@@ -61,69 +82,6 @@ void __init time_init(void)
        set_linux_timer(get_ccount() + CCOUNT_PER_JIFFY);
 }
 
-
-int do_settimeofday(struct timespec *tv)
-{
-       time_t wtm_sec, sec = tv->tv_sec;
-       long wtm_nsec, nsec = tv->tv_nsec;
-       unsigned long delta;
-
-       if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
-               return -EINVAL;
-
-       write_seqlock_irq(&xtime_lock);
-
-       /* This is revolting. We need to set "xtime" correctly. However, the
-        * value in this location is the value at the most recent update of
-        * wall time.  Discover what correction gettimeofday() would have
-        * made, and then undo it!
-        */
-
-       delta = CCOUNT_PER_JIFFY;
-       delta += get_ccount() - get_linux_timer();
-       nsec -= delta * NSEC_PER_CCOUNT;
-
-       wtm_sec  = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec);
-       wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec);
-
-       set_normalized_timespec(&xtime, sec, nsec);
-       set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
-
-       ntp_clear();
-       write_sequnlock_irq(&xtime_lock);
-       return 0;
-}
-
-EXPORT_SYMBOL(do_settimeofday);
-
-
-void do_gettimeofday(struct timeval *tv)
-{
-       unsigned long flags;
-       unsigned long volatile sec, usec, delta, seq;
-
-       do {
-               seq = read_seqbegin_irqsave(&xtime_lock, flags);
-
-               sec = xtime.tv_sec;
-               usec = (xtime.tv_nsec / NSEC_PER_USEC);
-
-               delta = get_linux_timer() - get_ccount();
-
-       } while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
-
-       usec += (((unsigned long) CCOUNT_PER_JIFFY - delta)
-                * (unsigned long) NSEC_PER_CCOUNT) / NSEC_PER_USEC;
-
-       for (; usec >= 1000000; sec++, usec -= 1000000)
-               ;
-
-       tv->tv_sec = sec;
-       tv->tv_usec = usec;
-}
-
-EXPORT_SYMBOL(do_gettimeofday);
-
 /*
  * The timer interrupt is called HZ times per second.
  */
@@ -177,4 +135,3 @@ void __cpuinit calibrate_delay(void)
               (loops_per_jiffy/(10000/HZ)) % 100);
 }
 #endif
-