Merge branches 'x86/apic', 'x86/cleanups', 'x86/cpufeature', 'x86/crashdump', 'x86...
Ingo Molnar [Tue, 23 Dec 2008 15:27:23 +0000 (16:27 +0100)]
1372 files changed:
Documentation/00-INDEX
Documentation/ABI/testing/sysfs-c2port [new file with mode: 0644]
Documentation/ABI/testing/sysfs-firmware-acpi
Documentation/DMA-API.txt
Documentation/PCI/00-INDEX
Documentation/PCI/MSI-HOWTO.txt [moved from Documentation/MSI-HOWTO.txt with 100% similarity]
Documentation/acpi/debug.txt [new file with mode: 0644]
Documentation/arm/mem_alignment
Documentation/blockdev/00-INDEX [new file with mode: 0644]
Documentation/blockdev/README.DAC960 [moved from Documentation/README.DAC960 with 100% similarity]
Documentation/blockdev/cciss.txt [moved from Documentation/cciss.txt with 100% similarity]
Documentation/blockdev/cpqarray.txt [moved from Documentation/cpqarray.txt with 100% similarity]
Documentation/blockdev/floppy.txt [moved from Documentation/floppy.txt with 100% similarity]
Documentation/blockdev/nbd.txt [moved from Documentation/nbd.txt with 100% similarity]
Documentation/blockdev/paride.txt [moved from Documentation/paride.txt with 100% similarity]
Documentation/blockdev/ramdisk.txt [moved from Documentation/ramdisk.txt with 100% similarity]
Documentation/c2port.txt [new file with mode: 0644]
Documentation/cgroups/freezer-subsystem.txt
Documentation/cpu-freq/user-guide.txt
Documentation/feature-removal-schedule.txt
Documentation/filesystems/ocfs2.txt
Documentation/filesystems/proc.txt
Documentation/filesystems/ramfs-rootfs-initramfs.txt
Documentation/filesystems/xip.txt
Documentation/ftrace.txt
Documentation/hwmon/adt7462 [new file with mode: 0644]
Documentation/hwmon/lis3lv02d [new file with mode: 0644]
Documentation/ics932s401 [new file with mode: 0644]
Documentation/input/input-programming.txt
Documentation/ioctl/00-INDEX [new file with mode: 0644]
Documentation/ioctl/ioctl-number.txt [moved from Documentation/ioctl-number.txt with 100% similarity]
Documentation/kernel-parameters.txt
Documentation/local_ops.txt
Documentation/networking/phy.txt
Documentation/nmi_watchdog.txt
Documentation/powerpc/booting-without-of.txt
Documentation/printk-formats.txt [new file with mode: 0644]
Documentation/serial/00-INDEX [new file with mode: 0644]
Documentation/serial/README.cycladesZ [moved from Documentation/README.cycladesZ with 100% similarity]
Documentation/serial/computone.txt [moved from Documentation/computone.txt with 99% similarity]
Documentation/serial/digiepca.txt [moved from Documentation/digiepca.txt with 100% similarity]
Documentation/serial/hayes-esp.txt [moved from Documentation/hayes-esp.txt with 100% similarity]
Documentation/serial/moxa-smartio [moved from Documentation/moxa-smartio with 100% similarity]
Documentation/serial/riscom8.txt [moved from Documentation/riscom8.txt with 100% similarity]
Documentation/serial/rocket.txt [moved from Documentation/rocket.txt with 100% similarity]
Documentation/serial/specialix.txt [moved from Documentation/specialix.txt with 100% similarity]
Documentation/serial/stallion.txt [moved from Documentation/stallion.txt with 100% similarity]
Documentation/serial/sx.txt [moved from Documentation/sx.txt with 100% similarity]
Documentation/serial/tty.txt [moved from Documentation/tty.txt with 100% similarity]
Documentation/sound/alsa/ALSA-Configuration.txt
Documentation/spi/spi-summary
Documentation/tracers/mmiotrace.txt
Documentation/usb/gadget_serial.txt
Documentation/usb/proc_usb_info.txt
Documentation/usb/usbmon.txt
Documentation/video4linux/README.cx88
Documentation/video4linux/si470x.txt [new file with mode: 0644]
Documentation/w1/masters/omap-hdq [new file with mode: 0644]
Documentation/x86/boot.txt
Documentation/x86/pat.txt
Documentation/x86/x86_64/boot-options.txt
Documentation/x86/x86_64/mm.txt
MAINTAINERS
Makefile
arch/Kconfig
arch/alpha/kernel/pci.c
arch/alpha/kernel/smp.c
arch/alpha/kernel/traps.c
arch/arm/common/sa1111.c
arch/arm/configs/corgi_defconfig
arch/arm/include/asm/bitops.h
arch/arm/include/asm/dma-mapping.h
arch/arm/include/asm/hardware/iop3xx-adma.h
arch/arm/include/asm/hardware/iop_adma.h
arch/arm/include/asm/mach/map.h
arch/arm/include/asm/processor.h
arch/arm/kernel/armksyms.c
arch/arm/kernel/traps.c
arch/arm/mach-clps711x/include/mach/hardware.h
arch/arm/mach-clps7500/core.c
arch/arm/mach-clps7500/include/mach/hardware.h
arch/arm/mach-h720x/include/mach/boards.h
arch/arm/mach-integrator/include/mach/platform.h
arch/arm/mach-iop13xx/include/mach/adma.h
arch/arm/mach-omap1/io.c
arch/arm/mach-pxa/include/mach/pxafb.h
arch/arm/mach-pxa/include/mach/reset.h
arch/arm/mach-pxa/mioa701.c
arch/arm/mach-pxa/mioa701_bootresume.S
arch/arm/mach-pxa/palmtx.c
arch/arm/mach-pxa/pcm990-baseboard.c
arch/arm/mach-pxa/reset.c
arch/arm/mach-pxa/spitz.c
arch/arm/mach-realview/clock.c
arch/arm/mach-realview/include/mach/platform.h
arch/arm/mach-s3c2410/include/mach/spi-gpio.h
arch/arm/mach-versatile/clock.c
arch/arm/mach-versatile/include/mach/platform.h
arch/arm/mm/alignment.c
arch/arm/mm/cache-feroceon-l2.c
arch/arm/mm/fault.c
arch/arm/mm/mmu.c
arch/arm/plat-iop/setup.c
arch/arm/plat-omap/gpio.c
arch/arm/plat-omap/include/mach/omapfb.h
arch/arm/plat-omap/include/mach/pm.h
arch/arm/plat-omap/sram.c
arch/arm/plat-orion/pcie.c
arch/avr32/boards/favr-32/flash.c
arch/avr32/boards/favr-32/setup.c
arch/avr32/boot/images/Makefile
arch/avr32/configs/atstk1006_defconfig
arch/avr32/mach-at32ap/at32ap700x.c
arch/blackfin/include/asm/bfin-global.h
arch/blackfin/include/asm/dma-mapping.h
arch/blackfin/kernel/bfin_gpio.c
arch/blackfin/kernel/cplb-nompu/cplbinit.c
arch/blackfin/kernel/process.c
arch/blackfin/kernel/setup.c
arch/blackfin/kernel/traps.c
arch/blackfin/mach-common/cache.S
arch/blackfin/mach-common/cpufreq.c
arch/blackfin/mach-common/entry.S
arch/blackfin/mm/sram-alloc.c
arch/frv/kernel/sys_frv.c
arch/ia64/configs/generic_defconfig
arch/ia64/hp/sim/Kconfig
arch/ia64/include/asm/intrinsics.h
arch/ia64/include/asm/paravirt_privop.h
arch/ia64/include/asm/ptrace.h
arch/ia64/kernel/entry.S
arch/ia64/kernel/head.S
arch/ia64/kernel/mca.c
arch/ia64/kernel/paravirt.c
arch/ia64/kernel/pci-dma.c
arch/ia64/kernel/topology.c
arch/ia64/kvm/Kconfig
arch/ia64/kvm/Makefile
arch/ia64/kvm/kvm-ia64.c
arch/ia64/kvm/optvfault.S
arch/ia64/kvm/vcpu.h
arch/ia64/sn/kernel/io_init.c
arch/ia64/sn/kernel/irq.c
arch/ia64/sn/kernel/setup.c
arch/ia64/xen/hypercall.S
arch/m32r/kernel/head.S
arch/m32r/kernel/vmlinux.lds.S
arch/m68k/configs/amiga_defconfig
arch/m68k/configs/apollo_defconfig
arch/m68k/configs/atari_defconfig
arch/m68k/configs/bvme6000_defconfig
arch/m68k/configs/hp300_defconfig
arch/m68k/configs/mac_defconfig
arch/m68k/configs/multi_defconfig
arch/m68k/configs/mvme147_defconfig
arch/m68k/configs/mvme16x_defconfig
arch/m68k/configs/q40_defconfig
arch/m68k/configs/sun3_defconfig
arch/m68k/configs/sun3x_defconfig
arch/m68k/kernel/ints.c
arch/mips/Kconfig.debug
arch/mips/configs/fulong_defconfig
arch/mips/configs/ip22_defconfig
arch/mips/configs/ip32_defconfig
arch/mips/configs/malta_defconfig
arch/mips/include/asm/asmmacro.h
arch/mips/include/asm/bug.h
arch/mips/include/asm/mach-rc32434/gpio.h
arch/mips/include/asm/mach-rc32434/rb.h
arch/mips/include/asm/pci.h
arch/mips/include/asm/ptrace.h
arch/mips/include/asm/time.h
arch/mips/kernel/csrc-r4k.c
arch/mips/kernel/scall32-o32.S
arch/mips/kernel/scall64-n32.S
arch/mips/kernel/scall64-o32.S
arch/mips/kernel/vpe.c
arch/mips/mm/dma-default.c
arch/mips/mm/sc-ip22.c
arch/mips/mti-malta/Makefile
arch/mips/mti-malta/malta-amon.c
arch/mips/mti-malta/malta-mtd.c [deleted file]
arch/mips/mti-malta/malta-platform.c
arch/mips/pci/pci.c
arch/mips/rb532/devices.c
arch/mips/rb532/gpio.c
arch/mn10300/Kconfig.debug
arch/mn10300/kernel/entry.S
arch/mn10300/kernel/gdb-io-serial.c
arch/mn10300/kernel/gdb-stub.c
arch/mn10300/kernel/mn10300-serial.c
arch/mn10300/kernel/module.c
arch/mn10300/kernel/setup.c
arch/mn10300/kernel/vmlinux.lds.S
arch/mn10300/mm/misalignment.c
arch/parisc/include/asm/parisc-device.h
arch/parisc/include/asm/posix_types.h
arch/parisc/include/asm/ptrace.h
arch/parisc/include/asm/smp.h
arch/parisc/kernel/drivers.c
arch/parisc/kernel/ptrace.c
arch/parisc/kernel/traps.c
arch/powerpc/boot/Makefile
arch/powerpc/boot/dts/gef_sbc610.dts
arch/powerpc/boot/dts/mpc832x_rdb.dts
arch/powerpc/boot/dts/mpc8349emitx.dts
arch/powerpc/boot/dts/mpc8572ds.dts
arch/powerpc/configs/40x/virtex_defconfig [new file with mode: 0644]
arch/powerpc/configs/44x/virtex5_defconfig
arch/powerpc/configs/52xx/cm5200_defconfig
arch/powerpc/configs/52xx/lite5200b_defconfig
arch/powerpc/configs/52xx/motionpro_defconfig
arch/powerpc/configs/52xx/pcm030_defconfig
arch/powerpc/configs/52xx/tqm5200_defconfig
arch/powerpc/configs/83xx/asp8347_defconfig
arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
arch/powerpc/configs/83xx/mpc832x_mds_defconfig
arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
arch/powerpc/configs/83xx/mpc834x_itx_defconfig
arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
arch/powerpc/configs/83xx/mpc834x_mds_defconfig
arch/powerpc/configs/83xx/mpc836x_mds_defconfig
arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
arch/powerpc/configs/83xx/mpc837x_mds_defconfig
arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
arch/powerpc/configs/83xx/sbc834x_defconfig
arch/powerpc/configs/85xx/ksi8560_defconfig
arch/powerpc/configs/85xx/mpc8536_ds_defconfig
arch/powerpc/configs/85xx/mpc8540_ads_defconfig
arch/powerpc/configs/85xx/mpc8544_ds_defconfig
arch/powerpc/configs/85xx/mpc8560_ads_defconfig
arch/powerpc/configs/85xx/mpc8568mds_defconfig
arch/powerpc/configs/85xx/mpc8572_ds_defconfig
arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
arch/powerpc/configs/85xx/sbc8548_defconfig
arch/powerpc/configs/85xx/sbc8560_defconfig
arch/powerpc/configs/85xx/stx_gp3_defconfig
arch/powerpc/configs/85xx/tqm8540_defconfig
arch/powerpc/configs/85xx/tqm8541_defconfig
arch/powerpc/configs/85xx/tqm8548_defconfig
arch/powerpc/configs/85xx/tqm8555_defconfig
arch/powerpc/configs/85xx/tqm8560_defconfig
arch/powerpc/configs/86xx/gef_sbc610_defconfig
arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
arch/powerpc/configs/86xx/sbc8641d_defconfig
arch/powerpc/configs/adder875_defconfig
arch/powerpc/configs/c2k_defconfig
arch/powerpc/configs/chrp32_defconfig
arch/powerpc/configs/ep8248e_defconfig
arch/powerpc/configs/ep88xc_defconfig
arch/powerpc/configs/g5_defconfig
arch/powerpc/configs/iseries_defconfig
arch/powerpc/configs/linkstation_defconfig
arch/powerpc/configs/maple_defconfig
arch/powerpc/configs/mgcoge_defconfig
arch/powerpc/configs/mgsuvd_defconfig
arch/powerpc/configs/mpc5200_defconfig
arch/powerpc/configs/mpc7448_hpc2_defconfig
arch/powerpc/configs/mpc8272_ads_defconfig
arch/powerpc/configs/mpc83xx_defconfig
arch/powerpc/configs/mpc85xx_defconfig
arch/powerpc/configs/mpc866_ads_defconfig
arch/powerpc/configs/mpc86xx_defconfig
arch/powerpc/configs/mpc885_ads_defconfig
arch/powerpc/configs/pmac32_defconfig
arch/powerpc/configs/ppc40x_defconfig
arch/powerpc/configs/ppc44x_defconfig
arch/powerpc/configs/ppc64_defconfig
arch/powerpc/configs/ppc6xx_defconfig
arch/powerpc/configs/pq2fads_defconfig
arch/powerpc/configs/prpmc2800_defconfig
arch/powerpc/configs/pseries_defconfig
arch/powerpc/configs/storcenter_defconfig
arch/powerpc/include/asm/immap_cpm2.h
arch/powerpc/include/asm/immap_qe.h
arch/powerpc/include/asm/kvm_ppc.h
arch/powerpc/include/asm/mmu-hash64.h
arch/powerpc/include/asm/ptrace.h
arch/powerpc/kernel/cpu_setup_44x.S
arch/powerpc/kernel/cputable.c
arch/powerpc/kernel/dma.c
arch/powerpc/kernel/entry_64.S
arch/powerpc/kernel/misc_32.S
arch/powerpc/kernel/prom_parse.c
arch/powerpc/kernel/signal_32.c
arch/powerpc/kernel/sysfs.c
arch/powerpc/kvm/44x_tlb.c
arch/powerpc/kvm/powerpc.c
arch/powerpc/lib/rheap.c
arch/powerpc/mm/40x_mmu.c
arch/powerpc/mm/hugetlbpage.c
arch/powerpc/mm/numa.c
arch/powerpc/platforms/cell/axon_msi.c
arch/powerpc/platforms/cell/smp.c
arch/powerpc/platforms/cell/spufs/file.c
arch/powerpc/sysdev/bestcomm/Kconfig
arch/powerpc/sysdev/mpic.c
arch/powerpc/sysdev/xilinx_intc.c
arch/s390/defconfig
arch/s390/include/asm/pgtable.h
arch/s390/include/asm/ptrace.h
arch/s390/include/asm/syscall.h
arch/s390/kernel/asm-offsets.c
arch/s390/kernel/compat_signal.c
arch/s390/kernel/entry.S
arch/s390/kernel/entry64.S
arch/s390/kernel/init_task.c
arch/s390/kernel/process.c
arch/s390/kernel/ptrace.c
arch/s390/kernel/setup.c
arch/s390/kernel/signal.c
arch/s390/kernel/sys_s390.c
arch/s390/kernel/time.c
arch/s390/kernel/topology.c
arch/s390/kernel/vmlinux.lds.S
arch/s390/kvm/sigp.c
arch/sh/Kconfig
arch/sh/include/asm/io.h
arch/sh/include/asm/pgtable.h
arch/sh/kernel/cpu/sh4a/setup-sh7723.c
arch/sh/kernel/early_printk.c
arch/sh/kernel/timers/timer-tmu.c
arch/sh/lib/copy_page.S
arch/sh/mm/Makefile_32
arch/sh/mm/Makefile_64
arch/sh/mm/init.c
arch/sh/mm/mmap.c [new file with mode: 0644]
arch/sh/mm/pg-sh4.c
arch/sparc/include/asm/bitops_32.h
arch/sparc/include/asm/ptrace_32.h
arch/sparc/include/asm/ptrace_64.h
arch/sparc/include/asm/termbits.h
arch/sparc/include/asm/unistd_32.h
arch/sparc/include/asm/unistd_64.h
arch/sparc/kernel/cpu.c
arch/sparc/kernel/head.S
arch/sparc/kernel/of_device.c
arch/sparc/kernel/smp.c
arch/sparc/kernel/sun4d_smp.c
arch/sparc/kernel/sun4m_smp.c
arch/sparc/kernel/systbls.S
arch/sparc/kernel/trampoline.S
arch/sparc/kernel/vmlinux.lds.S
arch/sparc/mm/srmmu.c
arch/sparc64/defconfig
arch/sparc64/kernel/ptrace.c
arch/sparc64/kernel/smp.c
arch/sparc64/kernel/sys32.S
arch/sparc64/kernel/systbls.S
arch/sparc64/kernel/visemul.c
arch/sparc64/lib/user_fixup.c
arch/sparc64/mm/init.c
arch/um/drivers/mconsole_kern.c
arch/x86/Kconfig
arch/x86/Kconfig.debug
arch/x86/boot/tty.c
arch/x86/boot/video-vga.c
arch/x86/boot/video.c
arch/x86/configs/i386_defconfig
arch/x86/configs/x86_64_defconfig
arch/x86/ia32/ia32_signal.c
arch/x86/include/asm/acpi.h
arch/x86/include/asm/amd_iommu_types.h
arch/x86/include/asm/apic.h
arch/x86/include/asm/bigsmp/apic.h
arch/x86/include/asm/bitops.h
arch/x86/include/asm/bug.h
arch/x86/include/asm/byteorder.h
arch/x86/include/asm/cpufeature.h
arch/x86/include/asm/dma-mapping.h
arch/x86/include/asm/ds.h
arch/x86/include/asm/emergency-restart.h
arch/x86/include/asm/es7000/apic.h
arch/x86/include/asm/es7000/wakecpu.h
arch/x86/include/asm/genapic_32.h
arch/x86/include/asm/genapic_64.h
arch/x86/include/asm/hypervisor.h [new file with mode: 0644]
arch/x86/include/asm/ia32.h
arch/x86/include/asm/idle.h
arch/x86/include/asm/io.h
arch/x86/include/asm/io_apic.h
arch/x86/include/asm/iomap.h [moved from include/asm-x86/iomap.h with 100% similarity]
arch/x86/include/asm/iommu.h
arch/x86/include/asm/irq.h
arch/x86/include/asm/irq_regs_32.h
arch/x86/include/asm/kexec.h
arch/x86/include/asm/mach-default/mach_apic.h
arch/x86/include/asm/mach-default/mach_wakecpu.h
arch/x86/include/asm/mach-default/smpboot_hooks.h
arch/x86/include/asm/mach-generic/mach_apic.h
arch/x86/include/asm/mach-generic/mach_wakecpu.h [new file with mode: 0644]
arch/x86/include/asm/mmu_context_32.h
arch/x86/include/asm/mmzone_32.h
arch/x86/include/asm/msr-index.h
arch/x86/include/asm/msr.h
arch/x86/include/asm/numaq/wakecpu.h
arch/x86/include/asm/pci.h
arch/x86/include/asm/pci_64.h
arch/x86/include/asm/pgtable-2level.h
arch/x86/include/asm/pgtable-3level.h
arch/x86/include/asm/pgtable.h
arch/x86/include/asm/pgtable_32.h
arch/x86/include/asm/pgtable_64.h
arch/x86/include/asm/prctl.h
arch/x86/include/asm/processor.h
arch/x86/include/asm/ptrace.h
arch/x86/include/asm/reboot.h
arch/x86/include/asm/setup.h
arch/x86/include/asm/sigframe.h [new file with mode: 0644]
arch/x86/include/asm/signal.h
arch/x86/include/asm/sparsemem.h
arch/x86/include/asm/syscalls.h
arch/x86/include/asm/system.h
arch/x86/include/asm/thread_info.h
arch/x86/include/asm/topology.h
arch/x86/include/asm/trampoline.h
arch/x86/include/asm/traps.h
arch/x86/include/asm/tsc.h
arch/x86/include/asm/uaccess.h
arch/x86/include/asm/uaccess_64.h
arch/x86/include/asm/unistd_64.h
arch/x86/include/asm/uv/bios.h
arch/x86/include/asm/uv/uv_hub.h
arch/x86/include/asm/vmi.h
arch/x86/include/asm/vmware.h [new file with mode: 0644]
arch/x86/include/asm/xen/hypercall.h
arch/x86/include/asm/xen/hypervisor.h
arch/x86/include/asm/xen/page.h
arch/x86/kernel/Makefile
arch/x86/kernel/acpi/boot.c
arch/x86/kernel/amd_iommu.c
arch/x86/kernel/amd_iommu_init.c
arch/x86/kernel/apic.c
arch/x86/kernel/apm_32.c
arch/x86/kernel/asm-offsets_32.c
arch/x86/kernel/asm-offsets_64.c
arch/x86/kernel/bios_uv.c
arch/x86/kernel/check.c [new file with mode: 0644]
arch/x86/kernel/cpu/Makefile
arch/x86/kernel/cpu/common.c
arch/x86/kernel/cpu/cpufreq/powernow-k8.c
arch/x86/kernel/cpu/cpufreq/powernow-k8.h
arch/x86/kernel/cpu/hypervisor.c [new file with mode: 0644]
arch/x86/kernel/cpu/intel_cacheinfo.c
arch/x86/kernel/cpu/mcheck/mce_64.c
arch/x86/kernel/cpu/mtrr/main.c
arch/x86/kernel/cpu/vmware.c [new file with mode: 0644]
arch/x86/kernel/crash.c
arch/x86/kernel/ds.c
arch/x86/kernel/dumpstack.c [new file with mode: 0644]
arch/x86/kernel/dumpstack.h [new file with mode: 0644]
arch/x86/kernel/dumpstack_32.c
arch/x86/kernel/dumpstack_64.c
arch/x86/kernel/e820.c
arch/x86/kernel/early-quirks.c
arch/x86/kernel/early_printk.c
arch/x86/kernel/entry_32.S
arch/x86/kernel/entry_64.S
arch/x86/kernel/es7000_32.c
arch/x86/kernel/genapic_64.c
arch/x86/kernel/genx2apic_uv_x.c
arch/x86/kernel/head.c
arch/x86/kernel/head32.c
arch/x86/kernel/head64.c
arch/x86/kernel/hpet.c
arch/x86/kernel/i387.c
arch/x86/kernel/init_task.c
arch/x86/kernel/io_apic.c
arch/x86/kernel/irq_64.c
arch/x86/kernel/kvmclock.c
arch/x86/kernel/machine_kexec_32.c
arch/x86/kernel/microcode_amd.c
arch/x86/kernel/microcode_core.c
arch/x86/kernel/microcode_intel.c
arch/x86/kernel/mpparse.c
arch/x86/kernel/nmi.c
arch/x86/kernel/numaq_32.c
arch/x86/kernel/paravirt-spinlocks.c
arch/x86/kernel/pci-calgary_64.c
arch/x86/kernel/pci-dma.c
arch/x86/kernel/pci-gart_64.c
arch/x86/kernel/process.c
arch/x86/kernel/reboot.c
arch/x86/kernel/relocate_kernel_32.S
arch/x86/kernel/setup.c
arch/x86/kernel/sigframe.h [deleted file]
arch/x86/kernel/signal.c [moved from arch/x86/kernel/signal_32.c with 73% similarity]
arch/x86/kernel/signal_64.c [deleted file]
arch/x86/kernel/smp.c
arch/x86/kernel/smpboot.c
arch/x86/kernel/time_64.c
arch/x86/kernel/tlb_32.c
arch/x86/kernel/tlb_uv.c
arch/x86/kernel/trampoline.c
arch/x86/kernel/traps.c
arch/x86/kernel/tsc.c
arch/x86/kernel/tsc_sync.c
arch/x86/kernel/vmi_32.c
arch/x86/kernel/vsyscall_64.c
arch/x86/kernel/xsave.c
arch/x86/kvm/Kconfig
arch/x86/kvm/i8254.c
arch/x86/kvm/mmu.c
arch/x86/kvm/paging_tmpl.h
arch/x86/kvm/vmx.c
arch/x86/kvm/vmx.h
arch/x86/mach-generic/bigsmp.c
arch/x86/mach-generic/default.c
arch/x86/mach-generic/es7000.c
arch/x86/mach-generic/probe.c
arch/x86/mach-generic/summit.c
arch/x86/mach-voyager/voyager_smp.c
arch/x86/mm/fault.c
arch/x86/mm/init_32.c
arch/x86/mm/init_64.c
arch/x86/mm/ioremap.c
arch/x86/mm/numa_32.c
arch/x86/mm/pat.c
arch/x86/oprofile/nmi_int.c
arch/x86/oprofile/op_model_ppro.c
arch/x86/pci/common.c
arch/x86/pci/direct.c
arch/x86/pci/fixup.c
arch/x86/pci/pci.h
arch/x86/power/hibernate_32.c
arch/x86/xen/enlighten.c
arch/x86/xen/mmu.c
arch/x86/xen/multicalls.c
arch/x86/xen/setup.c
arch/x86/xen/smp.c
arch/x86/xen/xen-ops.h
block/blk-barrier.c
block/blk-core.c
block/blk-map.c
block/blk-settings.c
block/bsg.c
block/compat_ioctl.c
block/elevator.c
block/genhd.c
block/ioctl.c
block/scsi_ioctl.c
crypto/Kconfig
crypto/Makefile
crypto/async_tx/async_xor.c
drivers/acpi/Kconfig
drivers/acpi/Makefile
drivers/acpi/ac.c
drivers/acpi/acpi_memhotplug.c
drivers/acpi/battery.c
drivers/acpi/blacklist.c
drivers/acpi/bus.c
drivers/acpi/button.c
drivers/acpi/cm_sbs.c
drivers/acpi/container.c
drivers/acpi/debug.c
drivers/acpi/ec.c
drivers/acpi/events/evgpe.c
drivers/acpi/events/evxfevnt.c
drivers/acpi/fan.c
drivers/acpi/glue.c
drivers/acpi/osl.c
drivers/acpi/pci_irq.c
drivers/acpi/pci_link.c
drivers/acpi/pci_root.c
drivers/acpi/power.c
drivers/acpi/processor_core.c
drivers/acpi/processor_idle.c
drivers/acpi/processor_perflib.c
drivers/acpi/processor_thermal.c
drivers/acpi/processor_throttling.c
drivers/acpi/reboot.c
drivers/acpi/scan.c
drivers/acpi/sleep/main.c
drivers/acpi/sleep/proc.c
drivers/acpi/sleep/wakeup.c
drivers/acpi/system.c
drivers/acpi/tables/tbfadt.c
drivers/acpi/thermal.c
drivers/acpi/toshiba_acpi.c
drivers/acpi/utils.c
drivers/acpi/video.c
drivers/acpi/video_detect.c [new file with mode: 0644]
drivers/acpi/wmi.c
drivers/ata/Kconfig
drivers/ata/ata_piix.c
drivers/ata/libata-core.c
drivers/ata/libata-eh.c
drivers/ata/libata-scsi.c
drivers/ata/libata-sff.c
drivers/ata/libata.h
drivers/ata/pata_cs5535.c
drivers/ata/pata_cs5536.c
drivers/ata/pata_hpt366.c
drivers/ata/pata_ninja32.c
drivers/ata/pata_pcmcia.c
drivers/ata/pata_rb532_cf.c
drivers/ata/pata_sch.c
drivers/ata/pata_sis.c
drivers/atm/horizon.c
drivers/block/Kconfig
drivers/block/cciss.c
drivers/block/floppy.c
drivers/block/pktcdvd.c
drivers/block/ub.c
drivers/block/xen-blkfront.c
drivers/block/xsysace.c
drivers/cdrom/cdrom.c
drivers/char/Kconfig
drivers/char/agp/uninorth-agp.c
drivers/char/cp437.uni
drivers/char/ipmi/ipmi_msghandler.c
drivers/char/ipmi/ipmi_si_intf.c
drivers/char/isicom.c
drivers/char/istallion.c
drivers/char/mxser.c
drivers/char/serial167.c
drivers/char/sonypi.c
drivers/char/specialix.c
drivers/char/tty_io.c
drivers/char/vt.c
drivers/char/xilinx_hwicap/buffer_icap.c
drivers/char/xilinx_hwicap/buffer_icap.h
drivers/char/xilinx_hwicap/fifo_icap.c
drivers/char/xilinx_hwicap/fifo_icap.h
drivers/char/xilinx_hwicap/xilinx_hwicap.c
drivers/char/xilinx_hwicap/xilinx_hwicap.h
drivers/crypto/talitos.c
drivers/dca/dca-core.c
drivers/dma/dmaengine.c
drivers/dma/dmatest.c
drivers/dma/ioat_dma.c
drivers/dma/iop-adma.c
drivers/dma/iovlock.c
drivers/dma/mv_xor.c
drivers/edac/i5000_edac.c
drivers/edac/i82875p_edac.c
drivers/firewire/fw-ohci.c
drivers/firewire/fw-sbp2.c
drivers/firewire/fw-transaction.c
drivers/firewire/fw-transaction.h
drivers/firmware/dmi_scan.c
drivers/gpio/Kconfig
drivers/gpio/Makefile
drivers/gpio/gpiolib.c
drivers/gpio/xilinx_gpio.c [new file with mode: 0644]
drivers/gpu/drm/drm_drv.c
drivers/gpu/drm/drm_irq.c
drivers/gpu/drm/drm_lock.c
drivers/gpu/drm/drm_stub.c
drivers/gpu/drm/i915/i915_dma.c
drivers/gpu/drm/i915/i915_drv.h
drivers/gpu/drm/i915/i915_gem.c
drivers/gpu/drm/i915/i915_gem_proc.c
drivers/gpu/drm/i915/i915_gem_tiling.c
drivers/gpu/drm/i915/i915_irq.c
drivers/gpu/drm/i915/i915_opregion.c
drivers/gpu/drm/i915/i915_reg.h
drivers/gpu/drm/i915/i915_suspend.c
drivers/gpu/drm/mga/mga_dma.c
drivers/gpu/drm/mga/mga_irq.c
drivers/gpu/drm/r128/r128_drv.c
drivers/gpu/drm/r128/r128_drv.h
drivers/gpu/drm/r128/r128_irq.c
drivers/gpu/drm/radeon/radeon_cp.c
drivers/gpu/drm/radeon/radeon_drv.h
drivers/gpu/drm/radeon/radeon_irq.c
drivers/gpu/drm/via/via_irq.c
drivers/gpu/drm/via/via_map.c
drivers/hid/hid-apple.c
drivers/hid/hid-core.c
drivers/hid/hid-ids.h
drivers/hid/hid-pl.c
drivers/hid/hidraw.c
drivers/hid/usbhid/hid-core.c
drivers/hid/usbhid/usbhid.h
drivers/hwmon/Kconfig
drivers/hwmon/Makefile
drivers/hwmon/adt7462.c [new file with mode: 0644]
drivers/hwmon/adt7470.c
drivers/hwmon/adt7473.c
drivers/hwmon/applesmc.c
drivers/hwmon/ibmaem.c
drivers/hwmon/lis3lv02d.c [new file with mode: 0644]
drivers/hwmon/lis3lv02d.h [new file with mode: 0644]
drivers/hwmon/lm85.c
drivers/i2c/busses/i2c-cpm.c
drivers/i2c/busses/i2c-highlander.c
drivers/i2c/busses/i2c-parport.c
drivers/i2c/busses/i2c-pmcmsp.c
drivers/i2c/busses/i2c-s3c2410.c
drivers/i2c/busses/i2c-sh_mobile.c
drivers/i2c/chips/isp1301_omap.c
drivers/i2c/i2c-core.c
drivers/ide/Kconfig
drivers/ide/alim15x3.c
drivers/ide/amd74xx.c
drivers/ide/icside.c
drivers/ide/ide-cs.c
drivers/ide/ide-io.c
drivers/ide/ide-iops.c
drivers/ide/ide-probe.c
drivers/ide/pmac.c
drivers/ide/sgiioc4.c
drivers/idle/Kconfig
drivers/ieee1394/highlevel.c
drivers/ieee1394/hosts.h
drivers/ieee1394/nodemgr.c
drivers/ieee1394/sbp2.c
drivers/infiniband/hw/cxgb3/iwch_provider.c
drivers/infiniband/hw/cxgb3/iwch_qp.c
drivers/infiniband/hw/ehca/ehca_classes.h
drivers/infiniband/hw/ehca/ehca_irq.c
drivers/infiniband/hw/ehca/ehca_main.c
drivers/infiniband/hw/ehca/ehca_qp.c
drivers/infiniband/hw/ehca/ehca_reqs.c
drivers/infiniband/hw/ipath/ipath_ruc.c
drivers/infiniband/hw/mlx4/cq.c
drivers/infiniband/hw/mlx4/mr.c
drivers/infiniband/hw/nes/nes.c
drivers/infiniband/hw/nes/nes_hw.h
drivers/infiniband/hw/nes/nes_verbs.c
drivers/infiniband/ulp/ipoib/ipoib_main.c
drivers/input/ff-memless.c
drivers/input/keyboard/atkbd.c
drivers/input/misc/cm109.c
drivers/input/mouse/hgpk.c
drivers/input/serio/i8042-x86ia64io.h
drivers/input/tablet/wacom.h
drivers/input/tablet/wacom_sys.c
drivers/input/tablet/wacom_wac.c
drivers/input/tablet/wacom_wac.h
drivers/input/touchscreen/elo.c
drivers/input/xen-kbdfront.c
drivers/isdn/hardware/avm/b1isa.c
drivers/isdn/hisax/config.c
drivers/isdn/hysdn/hysdn_net.c
drivers/isdn/i4l/isdn_net.c
drivers/macintosh/rack-meter.c
drivers/md/bitmap.c
drivers/md/dm-mpath.c
drivers/md/dm-raid1.c
drivers/md/dm-stripe.c
drivers/md/dm-table.c
drivers/md/dm.c
drivers/media/dvb/dm1105/dm1105.c
drivers/media/dvb/dvb-core/dvb_frontend.c
drivers/media/dvb/dvb-usb/Kconfig
drivers/media/dvb/dvb-usb/af9015.c
drivers/media/dvb/dvb-usb/af9015.h
drivers/media/dvb/dvb-usb/anysee.c
drivers/media/dvb/dvb-usb/dib0700.h
drivers/media/dvb/dvb-usb/dib0700_core.c
drivers/media/dvb/dvb-usb/dib0700_devices.c
drivers/media/dvb/dvb-usb/dvb-usb-urb.c
drivers/media/dvb/dvb-usb/usb-urb.c
drivers/media/dvb/frontends/af9013.c
drivers/media/dvb/siano/sms-cards.c
drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c
drivers/media/dvb/ttusb-dec/ttusb_dec.c
drivers/media/radio/Kconfig
drivers/media/radio/radio-si470x.c
drivers/media/video/cafe_ccic.c
drivers/media/video/compat_ioctl32.c
drivers/media/video/cx18/cx18-driver.c
drivers/media/video/cx18/cx18-driver.h
drivers/media/video/cx18/cx18-dvb.c
drivers/media/video/cx18/cx18-dvb.h
drivers/media/video/cx18/cx18-io.c
drivers/media/video/cx18/cx18-io.h
drivers/media/video/cx18/cx18-irq.c
drivers/media/video/cx18/cx18-irq.h
drivers/media/video/cx18/cx18-mailbox.c
drivers/media/video/cx18/cx18-queue.c
drivers/media/video/cx18/cx18-scb.h
drivers/media/video/cx88/cx88-blackbird.c
drivers/media/video/cx88/cx88-dvb.c
drivers/media/video/cx88/cx88-mpeg.c
drivers/media/video/cx88/cx88-video.c
drivers/media/video/cx88/cx88.h
drivers/media/video/em28xx/em28xx-audio.c
drivers/media/video/em28xx/em28xx-core.c
drivers/media/video/em28xx/em28xx-i2c.c
drivers/media/video/em28xx/em28xx-video.c
drivers/media/video/em28xx/em28xx.h
drivers/media/video/gspca/Kconfig
drivers/media/video/gspca/conex.c
drivers/media/video/gspca/finepix.c
drivers/media/video/gspca/gspca.c
drivers/media/video/gspca/gspca.h
drivers/media/video/gspca/pac7311.c
drivers/media/video/gspca/spca501.c
drivers/media/video/gspca/spca505.c
drivers/media/video/gspca/spca561.c
drivers/media/video/gspca/vc032x.c
drivers/media/video/gspca/zc3xx.c
drivers/media/video/ivtv/Kconfig
drivers/media/video/ivtv/ivtv-driver.c
drivers/media/video/s2255drv.c
drivers/media/video/saa7110.c
drivers/media/video/saa7134/saa7134-core.c
drivers/media/video/tvaudio.c
drivers/media/video/usbvideo/ibmcam.c
drivers/message/fusion/mptscsih.c
drivers/message/i2o/i2o_block.c
drivers/message/i2o/iop.c
drivers/mfd/da903x.c
drivers/mfd/wm8350-i2c.c
drivers/misc/Kconfig
drivers/misc/Makefile
drivers/misc/acer-wmi.c
drivers/misc/asus-laptop.c
drivers/misc/c2port/Kconfig [new file with mode: 0644]
drivers/misc/c2port/Makefile [new file with mode: 0644]
drivers/misc/c2port/c2port-duramar2150.c [new file with mode: 0644]
drivers/misc/c2port/core.c [new file with mode: 0644]
drivers/misc/compal-laptop.c
drivers/misc/eeepc-laptop.c
drivers/misc/fujitsu-laptop.c
drivers/misc/ics932s401.c [new file with mode: 0644]
drivers/misc/intel_menlow.c
drivers/misc/msi-laptop.c
drivers/misc/sgi-gru/Makefile
drivers/misc/sgi-gru/grufault.c
drivers/misc/sgi-gru/grufile.c
drivers/misc/sgi-gru/gruprocfs.c
drivers/misc/sgi-xp/xp.h
drivers/misc/sgi-xp/xp_main.c
drivers/misc/sgi-xp/xp_sn2.c
drivers/misc/sgi-xp/xp_uv.c
drivers/misc/sgi-xp/xpc.h
drivers/misc/sgi-xp/xpc_sn2.c
drivers/misc/sgi-xp/xpc_uv.c
drivers/misc/sony-laptop.c
drivers/misc/thinkpad_acpi.c
drivers/mtd/devices/m25p80.c
drivers/mtd/maps/cdb89712.c
drivers/mtd/maps/h720x-flash.c
drivers/mtd/maps/physmap.c
drivers/mtd/nand/fsl_upm.c
drivers/mtd/nand/pasemi_nand.c
drivers/mtd/nand/pxa3xx_nand.c
drivers/mtd/onenand/omap2.c
drivers/mtd/ubi/eba.c
drivers/mtd/ubi/scan.c
drivers/mtd/ubi/wl.c
drivers/net/Kconfig
drivers/net/Makefile
drivers/net/atl1e/atl1e_hw.c
drivers/net/atlx/atl1.c
drivers/net/atlx/atl2.c
drivers/net/bnx2.c
drivers/net/bnx2.h
drivers/net/chelsio/sge.c
drivers/net/cxgb3/cxgb3_main.c
drivers/net/cxgb3/t3_hw.c
drivers/net/e100.c
drivers/net/e1000/e1000_ethtool.c
drivers/net/e1000/e1000_main.c
drivers/net/e1000e/e1000.h
drivers/net/e1000e/ethtool.c
drivers/net/e1000e/ich8lan.c
drivers/net/e1000e/netdev.c
drivers/net/e1000e/param.c
drivers/net/enc28j60.c
drivers/net/gianfar.c
drivers/net/hp-plus.c
drivers/net/igb/igb_ethtool.c
drivers/net/igb/igb_main.c
drivers/net/ipg.c
drivers/net/ixgbe/ixgbe_main.c
drivers/net/jme.c
drivers/net/jme.h
drivers/net/macvlan.c
drivers/net/mlx4/en_netdev.c
drivers/net/mlx4/en_params.c
drivers/net/mlx4/main.c
drivers/net/mlx4/mlx4.h
drivers/net/mlx4/mlx4_en.h
drivers/net/mlx4/port.c
drivers/net/mv643xx_eth.c
drivers/net/myri10ge/myri10ge.c
drivers/net/netx-eth.c
drivers/net/niu.c
drivers/net/niu.h
drivers/net/pcmcia/axnet_cs.c
drivers/net/pcmcia/ibmtr_cs.c
drivers/net/pcmcia/pcnet_cs.c
drivers/net/phy/marvell.c
drivers/net/phy/mdio_bus.c
drivers/net/phy/phy_device.c
drivers/net/phy/vitesse.c
drivers/net/pppol2tp.c
drivers/net/qla3xxx.c
drivers/net/sfc/ethtool.c
drivers/net/sh_eth.c
drivers/net/sis900.c
drivers/net/smc911x.c
drivers/net/smc91x.c
drivers/net/spider_net.c
drivers/net/starfire.c
drivers/net/sungem.c
drivers/net/tlan.c
drivers/net/ucc_geth_ethtool.c
drivers/net/usb/asix.c
drivers/net/usb/hso.c
drivers/net/via-velocity.c
drivers/net/wireless/ath5k/base.c
drivers/net/wireless/ath5k/base.h
drivers/net/wireless/ath5k/debug.c
drivers/net/wireless/ath9k/beacon.c
drivers/net/wireless/ath9k/recv.c
drivers/net/wireless/hostap/hostap_wlan.h
drivers/net/wireless/ipw2200.c
drivers/net/wireless/iwlwifi/iwl-agn.c
drivers/net/wireless/iwlwifi/iwl-core.c
drivers/net/wireless/iwlwifi/iwl-dev.h
drivers/net/wireless/iwlwifi/iwl-rx.c
drivers/net/wireless/iwlwifi/iwl-sta.c
drivers/net/wireless/iwlwifi/iwl3945-base.c
drivers/net/wireless/libertas_tf/if_usb.c
drivers/net/wireless/rtl8187_dev.c
drivers/net/wireless/zd1211rw/zd_mac.c
drivers/net/xen-netfront.c
drivers/parport/Kconfig
drivers/parport/parport_serial.c
drivers/pci/hotplug/acpiphp.h
drivers/pci/hotplug/acpiphp_core.c
drivers/pci/hotplug/acpiphp_glue.c
drivers/pci/hotplug/ibmphp_core.c
drivers/pci/hotplug/pciehp_core.c
drivers/pci/intel-iommu.c
drivers/pci/pci-acpi.c
drivers/pci/pci.c
drivers/pci/pcie/aer/aerdrv_core.c
drivers/pci/pcie/aspm.c
drivers/pci/quirks.c
drivers/pci/slot.c
drivers/pcmcia/bfin_cf_pcmcia.c
drivers/pcmcia/cistpl.c
drivers/pcmcia/cs.c
drivers/pcmcia/ds.c
drivers/pcmcia/pcmcia_resource.c
drivers/pcmcia/rsrc_nonstatic.c
drivers/rapidio/rio-scan.c
drivers/rapidio/rio.c
drivers/rtc/Kconfig
drivers/rtc/Makefile
drivers/rtc/rtc-ds1390.c [new file with mode: 0644]
drivers/rtc/rtc-ds1672.c
drivers/rtc/rtc-max6900.c
drivers/rtc/rtc-rx8581.c [new file with mode: 0644]
drivers/rtc/rtc-starfire.c
drivers/rtc/rtc-sun4v.c
drivers/rtc/rtc-twl4030.c
drivers/rtc/rtc-wm8350.c [new file with mode: 0644]
drivers/s390/block/dasd.c
drivers/s390/char/sclp_cmd.c
drivers/s390/cio/device.c
drivers/s390/kvm/kvm_virtio.c
drivers/s390/scsi/zfcp_aux.c
drivers/s390/scsi/zfcp_ccw.c
drivers/s390/scsi/zfcp_dbf.c
drivers/s390/scsi/zfcp_dbf.h
drivers/s390/scsi/zfcp_erp.c
drivers/s390/scsi/zfcp_fc.c
drivers/s390/scsi/zfcp_fsf.c
drivers/s390/scsi/zfcp_scsi.c
drivers/scsi/aacraid/linit.c
drivers/scsi/advansys.c
drivers/scsi/device_handler/scsi_dh_hp_sw.c
drivers/scsi/dpt_i2o.c
drivers/scsi/gdth.c
drivers/scsi/ibmvscsi/ibmvscsi.c
drivers/scsi/ibmvscsi/ibmvstgt.c
drivers/scsi/libiscsi.c
drivers/scsi/megaraid.c
drivers/scsi/megaraid.h
drivers/scsi/megaraid/megaraid_sas.c
drivers/scsi/qla2xxx/qla_def.h
drivers/scsi/qla2xxx/qla_init.c
drivers/scsi/qla2xxx/qla_mbx.c
drivers/scsi/qla2xxx/qla_os.c
drivers/scsi/qla2xxx/qla_sup.c
drivers/scsi/qla2xxx/qla_version.h
drivers/scsi/scsi_error.c
drivers/scsi/scsi_lib.c
drivers/scsi/sd.c
drivers/scsi/sr.c
drivers/scsi/stex.c
drivers/serial/ioc3_serial.c
drivers/serial/mpc52xx_uart.c
drivers/serial/s3c2440.c
drivers/serial/sh-sci.c
drivers/serial/sh-sci.h
drivers/serial/uartlite.c
drivers/sh/maple/maple.c
drivers/spi/atmel_spi.c
drivers/spi/au1550_spi.c
drivers/spi/mpc52xx_psc_spi.c
drivers/spi/pxa2xx_spi.c
drivers/spi/spi_imx.c
drivers/spi/spi_s3c24xx_gpio.c
drivers/spi/spidev.c
drivers/ssb/Kconfig
drivers/staging/Kconfig
drivers/telephony/phonedev.c
drivers/usb/class/cdc-acm.c
drivers/usb/class/usbtmc.c
drivers/usb/core/driver.c
drivers/usb/core/message.c
drivers/usb/core/sysfs.c
drivers/usb/core/urb.c
drivers/usb/gadget/f_acm.c
drivers/usb/gadget/f_rndis.c
drivers/usb/gadget/fsl_qe_udc.c
drivers/usb/gadget/fsl_usb2_udc.c
drivers/usb/gadget/pxa25x_udc.c
drivers/usb/host/Kconfig
drivers/usb/host/ehci-hcd.c
drivers/usb/host/ehci-pci.c
drivers/usb/host/ehci-ps3.c
drivers/usb/host/ehci-sched.c
drivers/usb/host/ehci.h
drivers/usb/host/isp1760-if.c
drivers/usb/host/ohci-ps3.c
drivers/usb/host/r8a66597-hcd.c
drivers/usb/misc/sisusbvga/sisusb.c
drivers/usb/misc/vstusb.c
drivers/usb/mon/mon_bin.c
drivers/usb/musb/musb_core.c
drivers/usb/musb/musb_debug.h
drivers/usb/musb/musb_host.c
drivers/usb/musb/musb_host.h
drivers/usb/musb/omap2430.c
drivers/usb/musb/tusb6010.c
drivers/usb/serial/console.c
drivers/usb/serial/cp2101.c
drivers/usb/serial/ftdi_sio.c
drivers/usb/serial/ftdi_sio.h
drivers/usb/serial/ir-usb.c
drivers/usb/serial/option.c
drivers/usb/serial/pl2303.c
drivers/usb/serial/pl2303.h
drivers/usb/serial/ti_usb_3410_5052.c
drivers/usb/storage/Kconfig
drivers/usb/storage/unusual_devs.h
drivers/video/atmel_lcdfb.c
drivers/video/aty/radeon_accel.c
drivers/video/aty/radeon_backlight.c
drivers/video/aty/radeon_base.c
drivers/video/aty/radeon_pm.c
drivers/video/aty/radeonfb.h
drivers/video/backlight/da903x.c
drivers/video/backlight/lcd.c
drivers/video/cirrusfb.c
drivers/video/console/fbcon.c
drivers/video/fbmem.c
drivers/video/macfb.c
drivers/video/mb862xx/mb862xxfb.c
drivers/video/omap/Makefile
drivers/video/omap/lcd_sx1.c [deleted file]
drivers/video/omap/omapfb_main.c
drivers/video/pxafb.c
drivers/video/tmiofb.c
drivers/video/via/viafbdev.c
drivers/video/xen-fbfront.c
drivers/video/xilinxfb.c
drivers/w1/masters/Kconfig
drivers/w1/masters/Makefile
drivers/w1/masters/omap_hdq.c [new file with mode: 0644]
drivers/w1/slaves/Kconfig
drivers/w1/slaves/Makefile
drivers/w1/slaves/w1_bq27000.c [new file with mode: 0644]
drivers/w1/w1.h
drivers/w1/w1_io.c
drivers/watchdog/booke_wdt.c
drivers/watchdog/hpwdt.c
drivers/watchdog/iTCO_vendor_support.c
drivers/watchdog/iTCO_wdt.c
drivers/watchdog/mtx-1_wdt.c
drivers/xen/balloon.c
drivers/xen/features.c
drivers/xen/grant-table.c
fs/9p/fid.c
fs/9p/v9fs.c
fs/9p/vfs_dentry.c
fs/9p/vfs_inode.c
fs/block_dev.c
fs/buffer.c
fs/cifs/CHANGES
fs/cifs/cifs_debug.c
fs/cifs/cifs_dfs_ref.c
fs/cifs/cifs_spnego.c
fs/cifs/cifsfs.c
fs/cifs/cifsglob.h
fs/cifs/cifssmb.c
fs/cifs/connect.c
fs/cifs/file.c
fs/cifs/misc.c
fs/cifs/readdir.c
fs/dlm/lockspace.c
fs/ecryptfs/keystore.c
fs/eventpoll.c
fs/exec.c
fs/exportfs/expfs.c
fs/ext3/super.c
fs/ext4/balloc.c
fs/fcntl.c
fs/hostfs/hostfs.h
fs/hostfs/hostfs_kern.c
fs/hostfs/hostfs_user.c
fs/inotify.c
fs/ioctl.c
fs/lockd/host.c
fs/lockd/svc.c
fs/namei.c
fs/namespace.c
fs/nfsd/nfs4recover.c
fs/nfsd/nfs4state.c
fs/ntfs/debug.h
fs/ocfs2/buffer_head_io.c
fs/ocfs2/dlm/dlmfs.c
fs/ocfs2/dlm/userdlm.h
fs/ocfs2/dlmglue.c
fs/ocfs2/file.c
fs/ocfs2/inode.c
fs/ocfs2/journal.c
fs/ocfs2/mmap.c
fs/ocfs2/namei.c
fs/ocfs2/ocfs2.h
fs/ocfs2/ocfs2_fs.h
fs/ocfs2/stack_user.c
fs/ocfs2/xattr.c
fs/ocfs2/xattr.h
fs/partitions/check.c
fs/proc/base.c
fs/proc/proc_sysctl.c
fs/proc/task_mmu.c
fs/ubifs/commit.c
fs/ubifs/debug.c
fs/ubifs/dir.c
fs/ubifs/file.c
fs/ubifs/journal.c
fs/ubifs/key.h
fs/ubifs/lpt_commit.c
fs/ubifs/orphan.c
fs/ubifs/recovery.c
fs/ubifs/replay.c
fs/ubifs/sb.c
fs/ubifs/super.c
fs/ubifs/tnc.c
fs/ubifs/ubifs.h
fs/udf/inode.c
fs/xfs/xfs_da_btree.c
fs/xfs/xfs_dir2.c
fs/xfs/xfs_inode.c
fs/xfs/xfs_log.c
fs/xfs/xfs_log_recover.c
fs/xfs/xfs_mount.c
fs/xfs/xfs_rename.c
include/acpi/acpi_bus.h
include/acpi/acpi_drivers.h
include/acpi/acpixf.h
include/acpi/acpredef.h
include/acpi/actypes.h
include/asm-generic/atomic.h
include/asm-generic/audit_write.h
include/asm-generic/bug.h
include/asm-generic/pgtable.h
include/asm-mn10300/uaccess.h
include/drm/drmP.h
include/drm/drm_pciids.h
include/linux/acpi.h
include/linux/audit.h
include/linux/blkdev.h
include/linux/c2port.h [new file with mode: 0644]
include/linux/can/core.h
include/linux/compat.h
include/linux/cpuset.h
include/linux/dmi.h
include/linux/fs.h
include/linux/ftrace.h
include/linux/genhd.h
include/linux/highmem.h
include/linux/hrtimer.h
include/linux/ide.h
include/linux/idr.h
include/linux/inotify.h
include/linux/input.h
include/linux/irq.h
include/linux/kernel.h
include/linux/kexec.h
include/linux/libata.h
include/linux/lockdep.h
include/linux/memory.h
include/linux/mfd/wm8350/rtc.h
include/linux/mlx4/device.h
include/linux/mm.h
include/linux/net.h
include/linux/netdevice.h
include/linux/netfilter/nfnetlink_conntrack.h
include/linux/netfilter/x_tables.h
include/linux/page_cgroup.h
include/linux/pci.h
include/linux/pci_ids.h
include/linux/ratelimit.h
include/linux/ring_buffer.h
include/linux/sched.h
include/linux/security.h
include/linux/serial_core.h
include/linux/slab.h
include/linux/smp.h
include/linux/ssb/ssb.h
include/linux/syscalls.h
include/linux/telephony.h
include/linux/usb.h
include/linux/usb/ch9.h
include/net/af_unix.h
include/net/irda/irda_device.h
include/net/mac80211.h
include/net/request_sock.h
include/net/sock.h
include/net/timewait_sock.h
include/scsi/scsi_transport_fc.h
include/sound/core.h
include/video/atmel_lcdc.h
include/video/radeon.h
include/xen/interface/event_channel.h
init/Kconfig
ipc/util.c
kernel/Makefile
kernel/audit.c
kernel/audit_tree.c
kernel/auditfilter.c
kernel/auditsc.c
kernel/cgroup.c
kernel/cgroup_freezer.c
kernel/cpu.c
kernel/cpuset.c
kernel/exit.c
kernel/fork.c
kernel/hrtimer.c
kernel/irq/internals.h
kernel/irq/manage.c
kernel/irq/migration.c
kernel/irq/proc.c
kernel/kallsyms.c
kernel/kprobes.c
kernel/latencytop.c
kernel/lockdep.c
kernel/panic.c
kernel/posix-cpu-timers.c
kernel/posix-timers.c
kernel/power/main.c
kernel/power/swap.c
kernel/profile.c
kernel/ptrace.c
kernel/relay.c
kernel/sched.c
kernel/sched_clock.c
kernel/sched_debug.c
kernel/sched_fair.c
kernel/sched_stats.h
kernel/softirq.c
kernel/softlockup.c
kernel/stop_machine.c
kernel/sys_ni.c
kernel/sysctl.c
kernel/time/tick-sched.c
kernel/time/timekeeping.c
kernel/trace/ftrace.c
kernel/trace/ring_buffer.c
kernel/trace/trace.c
kernel/trace/trace_mmiotrace.c
kernel/trace/trace_stack.c
lib/bug.c
lib/dynamic_printk.c
lib/idr.c
lib/percpu_counter.c
lib/scatterlist.c
lib/swiotlb.c
mm/backing-dev.c
mm/hugetlb.c
mm/memory.c
mm/memory_hotplug.c
mm/migrate.c
mm/mlock.c
mm/mmap.c
mm/page_alloc.c
mm/page_cgroup.c
mm/slob.c
mm/slub.c
mm/sparse.c
mm/swap.c
mm/swapfile.c
mm/vmalloc.c
mm/vmscan.c
net/8021q/vlanproc.c
net/9p/Kconfig
net/atm/svc.c
net/bridge/br_netfilter.c
net/can/af_can.c
net/can/bcm.c
net/compat.c
net/core/netpoll.c
net/core/pktgen.c
net/core/rtnetlink.c
net/core/scm.c
net/core/skbuff.c
net/core/sock.c
net/dsa/slave.c
net/dsa/tag_dsa.c
net/dsa/tag_edsa.c
net/dsa/tag_trailer.c
net/ipv4/af_inet.c
net/ipv4/ip_input.c
net/ipv4/ipmr.c
net/ipv4/netfilter/nf_nat_rule.c
net/ipv4/proc.c
net/ipv4/tcp_htcp.c
net/ipv4/tcp_output.c
net/ipv4/tcp_vegas.c
net/ipv4/udp.c
net/ipv6/datagram.c
net/ipv6/ip6mr.c
net/ipv6/ipv6_sockglue.c
net/ipv6/ndisc.c
net/ipv6/proc.c
net/key/af_key.c
net/mac80211/debugfs_sta.c
net/mac80211/mlme.c
net/mac80211/sta_info.c
net/mac80211/wext.c
net/netfilter/ipvs/ip_vs_xmit.c
net/netfilter/nf_conntrack_core.c
net/netfilter/nf_conntrack_netlink.c
net/netfilter/xt_socket.c
net/netlabel/netlabel_unlabeled.c
net/phonet/af_phonet.c
net/phonet/pep-gprs.c
net/phonet/pn_dev.c
net/phonet/pn_netlink.c
net/rose/af_rose.c
net/sched/sch_api.c
net/sched/sch_generic.c
net/sched/sch_netem.c
net/socket.c
net/sunrpc/auth_generic.c
net/sunrpc/svcsock.c
net/unix/af_unix.c
net/unix/garbage.c
net/wireless/reg.c
net/xfrm/xfrm_policy.c
scripts/kernel-doc
security/keys/internal.h
security/keys/process_keys.c
security/keys/request_key.c
sound/isa/Kconfig
sound/pci/hda/hda_beep.c
sound/pci/hda/hda_beep.h
sound/pci/hda/hda_codec.c
sound/pci/hda/hda_proc.c
sound/pci/hda/patch_analog.c
sound/pci/hda/patch_realtek.c
sound/pci/hda/patch_sigmatel.c
sound/pci/pcxhr/pcxhr.c
sound/pci/rme9652/hdsp.c
sound/soc/fsl/Kconfig
sound/soc/omap/omap-pcm.c
sound/sound_core.c

index edef85c..2a39aeb 100644 (file)
@@ -42,14 +42,8 @@ IRQ.txt
        - description of what an IRQ is.
 ManagementStyle
        - how to (attempt to) manage kernel hackers.
-MSI-HOWTO.txt
-       - the Message Signaled Interrupts (MSI) Driver Guide HOWTO and FAQ.
 RCU/
        - directory with info on RCU (read-copy update).
-README.DAC960
-       - info on Mylex DAC960/DAC1100 PCI RAID Controller Driver for Linux.
-README.cycladesZ
-       - info on Cyclades-Z firmware loading.
 SAK.txt
        - info on Secure Attention Keys.
 SM501.txt
@@ -86,20 +80,16 @@ blackfin/
        - directory with documentation for the Blackfin arch.
 block/
        - info on the Block I/O (BIO) layer.
+blockdev/
+       - info on block devices & drivers
 cachetlb.txt
        - describes the cache/TLB flushing interfaces Linux uses.
-cciss.txt
-       - info, major/minor #'s for Compaq's SMART Array Controllers.
 cdrom/
        - directory with information on the CD-ROM drivers that Linux has.
-computone.txt
-       - info on Computone Intelliport II/Plus Multiport Serial Driver.
 connector/
        - docs on the netlink based userspace<->kernel space communication mod.
 console/
        - documentation on Linux console drivers.
-cpqarray.txt
-       - info on using Compaq's SMART2 Intelligent Disk Array Controllers.
 cpu-freq/
        - info on CPU frequency and voltage scaling.
 cpu-hotplug.txt
@@ -126,8 +116,6 @@ device-mapper/
        - directory with info on Device Mapper.
 devices.txt
        - plain ASCII listing of all the nodes in /dev/ with major minor #'s.
-digiepca.txt
-       - info on Digi Intl. {PC,PCI,EISA}Xx and Xem series cards.
 dontdiff
        - file containing a list of files that should never be diff'ed.
 driver-model/
@@ -152,14 +140,10 @@ filesystems/
        - info on the vfs and the various filesystems that Linux supports.
 firmware_class/
        - request_firmware() hotplug interface info.
-floppy.txt
-       - notes and driver options for the floppy disk driver.
 frv/
        - Fujitsu FR-V Linux documentation.
 gpio.txt
        - overview of GPIO (General Purpose Input/Output) access conventions.
-hayes-esp.txt
-       - info on using the Hayes ESP serial driver.
 highuid.txt
        - notes on the change from 16 bit to 32 bit user/group IDs.
 timers/
@@ -186,8 +170,6 @@ io_ordering.txt
        - info on ordering I/O writes to memory-mapped addresses.
 ioctl/
        - directory with documents describing various IOCTL calls.
-ioctl-number.txt
-       - how to implement and register device/driver ioctl calls.
 iostats.txt
        - info on I/O statistics Linux kernel provides.
 irqflags-tracing.txt
@@ -250,14 +232,10 @@ mips/
        - directory with info about Linux on MIPS architecture.
 mono.txt
        - how to execute Mono-based .NET binaries with the help of BINFMT_MISC.
-moxa-smartio
-       - file with info on installing/using Moxa multiport serial driver.
 mutex-design.txt
        - info on the generic mutex subsystem.
 namespaces/
        - directory with various information about namespaces
-nbd.txt
-       - info on a TCP implementation of a network block device.
 netlabel/
        - directory with information on the NetLabel subsystem.
 networking/
@@ -270,8 +248,6 @@ numastat.txt
        - info on how to read Numa policy hit/miss statistics in sysfs.
 oops-tracing.txt
        - how to decode those nasty internal kernel error dump messages.
-paride.txt
-       - information about the parallel port IDE subsystem.
 parisc/
        - directory with info on using Linux on PA-RISC architecture.
 parport.txt
@@ -290,20 +266,16 @@ powerpc/
        - directory with info on using Linux with the PowerPC.
 preempt-locking.txt
        - info on locking under a preemptive kernel.
+printk-formats.txt
+       - how to get printk format specifiers right
 prio_tree.txt
        - info on radix-priority-search-tree use for indexing vmas.
-ramdisk.txt
-       - short guide on how to set up and use the RAM disk.
 rbtree.txt
        - info on what red-black trees are and what they are for.
-riscom8.txt
-       - notes on using the RISCom/8 multi-port serial driver.
 robust-futex-ABI.txt
        - documentation of the robust futex ABI.
 robust-futexes.txt
        - a description of what robust futexes are.
-rocket.txt
-       - info on the Comtrol RocketPort multiport serial driver.
 rt-mutex-design.txt
        - description of the RealTime mutex implementation design.
 rt-mutex.txt
@@ -332,8 +304,6 @@ sparc/
        - directory with info on using Linux on Sparc architecture.
 sparse.txt
        - info on how to obtain and use the sparse tool for typechecking.
-specialix.txt
-       - info on hardware/driver for specialix IO8+ multiport serial card.
 spi/
        - overview of Linux kernel Serial Peripheral Interface (SPI) support.
 spinlocks.txt
@@ -342,14 +312,10 @@ stable_api_nonsense.txt
        - info on why the kernel does not have a stable in-kernel api or abi.
 stable_kernel_rules.txt
        - rules and procedures for the -stable kernel releases.
-stallion.txt
-       - info on using the Stallion multiport serial driver.
 svga.txt
        - short guide on selecting video modes at boot via VGA BIOS.
 sysfs-rules.txt
        - How not to use sysfs.
-sx.txt
-       - info on the Specialix SX/SI multiport serial driver.
 sysctl/
        - directory with info on the /proc/sys/* files.
 sysrq.txt
@@ -358,8 +324,6 @@ telephony/
        - directory with info on telephony (e.g. voice over IP) support.
 time_interpolators.txt
        - info on time interpolators.
-tty.txt
-       - guide to the locking policies of the tty layer.
 uml/
        - directory with information about User Mode Linux.
 unicode.txt
diff --git a/Documentation/ABI/testing/sysfs-c2port b/Documentation/ABI/testing/sysfs-c2port
new file mode 100644 (file)
index 0000000..716cffc
--- /dev/null
@@ -0,0 +1,88 @@
+What:          /sys/class/c2port/
+Date:          October 2008
+Contact:       Rodolfo Giometti <giometti@linux.it>
+Description:
+               The /sys/class/c2port/ directory will contain files and
+               directories that will provide a unified interface to
+               the C2 port interface.
+
+What:          /sys/class/c2port/c2portX
+Date:          October 2008
+Contact:       Rodolfo Giometti <giometti@linux.it>
+Description:
+               The /sys/class/c2port/c2portX/ directory is related to X-th
+               C2 port into the system. Each directory will contain files to
+               manage and control its C2 port.
+
+What:          /sys/class/c2port/c2portX/access
+Date:          October 2008
+Contact:       Rodolfo Giometti <giometti@linux.it>
+Description:
+               The /sys/class/c2port/c2portX/access file enable the access
+               to the C2 port from the system. No commands can be sent
+               till this entry is set to 0.
+
+What:          /sys/class/c2port/c2portX/dev_id
+Date:          October 2008
+Contact:       Rodolfo Giometti <giometti@linux.it>
+Description:
+               The /sys/class/c2port/c2portX/dev_id file show the device ID
+               of the connected micro.
+
+What:          /sys/class/c2port/c2portX/flash_access
+Date:          October 2008
+Contact:       Rodolfo Giometti <giometti@linux.it>
+Description:
+               The /sys/class/c2port/c2portX/flash_access file enable the
+               access to the on-board flash of the connected micro.
+               No commands can be sent till this entry is set to 0.
+
+What:          /sys/class/c2port/c2portX/flash_block_size
+Date:          October 2008
+Contact:       Rodolfo Giometti <giometti@linux.it>
+Description:
+               The /sys/class/c2port/c2portX/flash_block_size file show
+               the on-board flash block size of the connected micro.
+
+What:          /sys/class/c2port/c2portX/flash_blocks_num
+Date:          October 2008
+Contact:       Rodolfo Giometti <giometti@linux.it>
+Description:
+               The /sys/class/c2port/c2portX/flash_blocks_num file show
+               the on-board flash blocks number of the connected micro.
+
+What:          /sys/class/c2port/c2portX/flash_data
+Date:          October 2008
+Contact:       Rodolfo Giometti <giometti@linux.it>
+Description:
+               The /sys/class/c2port/c2portX/flash_data file export
+               the content of the on-board flash of the connected micro.
+
+What:          /sys/class/c2port/c2portX/flash_erase
+Date:          October 2008
+Contact:       Rodolfo Giometti <giometti@linux.it>
+Description:
+               The /sys/class/c2port/c2portX/flash_erase file execute
+               the "erase" command on the on-board flash of the connected
+               micro.
+
+What:          /sys/class/c2port/c2portX/flash_erase
+Date:          October 2008
+Contact:       Rodolfo Giometti <giometti@linux.it>
+Description:
+               The /sys/class/c2port/c2portX/flash_erase file show the
+               on-board flash size of the connected micro.
+
+What:          /sys/class/c2port/c2portX/reset
+Date:          October 2008
+Contact:       Rodolfo Giometti <giometti@linux.it>
+Description:
+               The /sys/class/c2port/c2portX/reset file execute a "reset"
+               command on the connected micro.
+
+What:          /sys/class/c2port/c2portX/rev_id
+Date:          October 2008
+Contact:       Rodolfo Giometti <giometti@linux.it>
+Description:
+               The /sys/class/c2port/c2portX/rev_id file show the revision ID
+               of the connected micro.
index f27be7d..e8ffc70 100644 (file)
@@ -89,7 +89,7 @@ Description:
 
                error - an interrupt that can't be accounted for above.
 
-               invalid: it's either a wakeup GPE or a GPE/Fixed Event that
+               invalid: it's either a GPE or a Fixed Event that
                        doesn't have an event handler.
 
                disable: the GPE/Fixed Event is valid but disabled.
@@ -117,30 +117,30 @@ Description:
                and other user space applications so that the machine won't shutdown
                when pressing the power button.
                # cat ff_pwr_btn
-               0
+               0       enabled
                # press the power button for 3 times;
                # cat ff_pwr_btn
-               3
+               3       enabled
                # echo disable > ff_pwr_btn
                # cat ff_pwr_btn
-               disable
+               3       disabled
                # press the power button for 3 times;
                # cat ff_pwr_btn
-               disable
+               3       disabled
                # echo enable > ff_pwr_btn
                # cat ff_pwr_btn
-               4
+               4       enabled
                /*
                 * this is because the status bit is set even if the enable bit is cleared,
                 * and it triggers an ACPI fixed event when the enable bit is set again
                 */
                # press the power button for 3 times;
                # cat ff_pwr_btn
-               7
+               7       enabled
                # echo disable > ff_pwr_btn
                # press the power button for 3 times;
                # echo clear > ff_pwr_btn       /* clear the status bit */
                # echo disable > ff_pwr_btn
                # cat ff_pwr_btn
-               7
+               7       enabled
 
index b8e8646..b462bb1 100644 (file)
@@ -316,12 +316,10 @@ reduce current DMA mapping usage or delay and try again later).
        pci_map_sg(struct pci_dev *hwdev, struct scatterlist *sg,
                int nents, int direction)
 
-Maps a scatter gather list from the block layer.
-
 Returns: the number of physical segments mapped (this may be shorter
-than <nents> passed in if the block layer determines that some
-elements of the scatter/gather list are physically adjacent and thus
-may be mapped with a single entry).
+than <nents> passed in if some elements of the scatter/gather list are
+physically or virtually adjacent and an IOMMU maps them with a single
+entry).
 
 Please note that the sg cannot be mapped again if it has been mapped once.
 The mapping process is allowed to destroy information in the sg.
index 49f4394..812b17f 100644 (file)
@@ -1,5 +1,7 @@
 00-INDEX
        - this file
+MSI-HOWTO.txt
+       - the Message Signaled Interrupts (MSI) Driver Guide HOWTO and FAQ.
 PCI-DMA-mapping.txt
        - info for PCI drivers using DMA portably across all platforms
 PCIEBUS-HOWTO.txt
diff --git a/Documentation/acpi/debug.txt b/Documentation/acpi/debug.txt
new file mode 100644 (file)
index 0000000..65bf47c
--- /dev/null
@@ -0,0 +1,148 @@
+                       ACPI Debug Output
+
+
+The ACPI CA, the Linux ACPI core, and some ACPI drivers can generate debug
+output.  This document describes how to use this facility.
+
+Compile-time configuration
+--------------------------
+
+ACPI debug output is globally enabled by CONFIG_ACPI_DEBUG.  If this config
+option is turned off, the debug messages are not even built into the
+kernel.
+
+Boot- and run-time configuration
+--------------------------------
+
+When CONFIG_ACPI_DEBUG=y, you can select the component and level of messages
+you're interested in.  At boot-time, use the acpi.debug_layer and
+acpi.debug_level kernel command line options.  After boot, you can use the
+debug_layer and debug_level files in /sys/module/acpi/parameters/ to control
+the debug messages.
+
+debug_layer (component)
+-----------------------
+
+The "debug_layer" is a mask that selects components of interest, e.g., a
+specific driver or part of the ACPI interpreter.  To build the debug_layer
+bitmask, look for the "#define _COMPONENT" in an ACPI source file.
+
+You can set the debug_layer mask at boot-time using the acpi.debug_layer
+command line argument, and you can change it after boot by writing values
+to /sys/module/acpi/parameters/debug_layer.
+
+The possible components are defined in include/acpi/acoutput.h and
+include/acpi/acpi_drivers.h.  Reading /sys/module/acpi/parameters/debug_layer
+shows the supported mask values, currently these:
+
+    ACPI_UTILITIES                  0x00000001
+    ACPI_HARDWARE                   0x00000002
+    ACPI_EVENTS                     0x00000004
+    ACPI_TABLES                     0x00000008
+    ACPI_NAMESPACE                  0x00000010
+    ACPI_PARSER                     0x00000020
+    ACPI_DISPATCHER                 0x00000040
+    ACPI_EXECUTER                   0x00000080
+    ACPI_RESOURCES                  0x00000100
+    ACPI_CA_DEBUGGER                0x00000200
+    ACPI_OS_SERVICES                0x00000400
+    ACPI_CA_DISASSEMBLER            0x00000800
+    ACPI_COMPILER                   0x00001000
+    ACPI_TOOLS                      0x00002000
+    ACPI_BUS_COMPONENT              0x00010000
+    ACPI_AC_COMPONENT               0x00020000
+    ACPI_BATTERY_COMPONENT          0x00040000
+    ACPI_BUTTON_COMPONENT           0x00080000
+    ACPI_SBS_COMPONENT              0x00100000
+    ACPI_FAN_COMPONENT              0x00200000
+    ACPI_PCI_COMPONENT              0x00400000
+    ACPI_POWER_COMPONENT            0x00800000
+    ACPI_CONTAINER_COMPONENT        0x01000000
+    ACPI_SYSTEM_COMPONENT           0x02000000
+    ACPI_THERMAL_COMPONENT          0x04000000
+    ACPI_MEMORY_DEVICE_COMPONENT    0x08000000
+    ACPI_VIDEO_COMPONENT            0x10000000
+    ACPI_PROCESSOR_COMPONENT        0x20000000
+
+debug_level
+-----------
+
+The "debug_level" is a mask that selects different types of messages, e.g.,
+those related to initialization, method execution, informational messages, etc.
+To build debug_level, look at the level specified in an ACPI_DEBUG_PRINT()
+statement.
+
+The ACPI interpreter uses several different levels, but the Linux
+ACPI core and ACPI drivers generally only use ACPI_LV_INFO.
+
+You can set the debug_level mask at boot-time using the acpi.debug_level
+command line argument, and you can change it after boot by writing values
+to /sys/module/acpi/parameters/debug_level.
+
+The possible levels are defined in include/acpi/acoutput.h.  Reading
+/sys/module/acpi/parameters/debug_level shows the supported mask values,
+currently these:
+
+    ACPI_LV_INIT                    0x00000001
+    ACPI_LV_DEBUG_OBJECT            0x00000002
+    ACPI_LV_INFO                    0x00000004
+    ACPI_LV_INIT_NAMES              0x00000020
+    ACPI_LV_PARSE                   0x00000040
+    ACPI_LV_LOAD                    0x00000080
+    ACPI_LV_DISPATCH                0x00000100
+    ACPI_LV_EXEC                    0x00000200
+    ACPI_LV_NAMES                   0x00000400
+    ACPI_LV_OPREGION                0x00000800
+    ACPI_LV_BFIELD                  0x00001000
+    ACPI_LV_TABLES                  0x00002000
+    ACPI_LV_VALUES                  0x00004000
+    ACPI_LV_OBJECTS                 0x00008000
+    ACPI_LV_RESOURCES               0x00010000
+    ACPI_LV_USER_REQUESTS           0x00020000
+    ACPI_LV_PACKAGE                 0x00040000
+    ACPI_LV_ALLOCATIONS             0x00100000
+    ACPI_LV_FUNCTIONS               0x00200000
+    ACPI_LV_OPTIMIZATIONS           0x00400000
+    ACPI_LV_MUTEX                   0x01000000
+    ACPI_LV_THREADS                 0x02000000
+    ACPI_LV_IO                      0x04000000
+    ACPI_LV_INTERRUPTS              0x08000000
+    ACPI_LV_AML_DISASSEMBLE         0x10000000
+    ACPI_LV_VERBOSE_INFO            0x20000000
+    ACPI_LV_FULL_TABLES             0x40000000
+    ACPI_LV_EVENTS                  0x80000000
+
+Examples
+--------
+
+For example, drivers/acpi/bus.c contains this:
+
+    #define _COMPONENT              ACPI_BUS_COMPONENT
+    ...
+    ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device insertion detected\n"));
+
+To turn on this message, set the ACPI_BUS_COMPONENT bit in acpi.debug_layer
+and the ACPI_LV_INFO bit in acpi.debug_level.  (The ACPI_DEBUG_PRINT
+statement uses ACPI_DB_INFO, which is macro based on the ACPI_LV_INFO
+definition.)
+
+Enable all AML "Debug" output (stores to the Debug object while interpreting
+AML) during boot:
+
+    acpi.debug_layer=0xffffffff acpi.debug_level=0x2
+
+Enable PCI and PCI interrupt routing debug messages:
+
+    acpi.debug_layer=0x400000 acpi.debug_level=0x4
+
+Enable all ACPI hardware-related messages:
+
+    acpi.debug_layer=0x2 acpi.debug_level=0xffffffff
+
+Enable all ACPI_DB_INFO messages after boot:
+
+    # echo 0x4 > /sys/module/acpi/parameters/debug_level
+
+Show all valid component values:
+
+    # cat /sys/module/acpi/parameters/debug_layer
index d145ccc..c7c7a11 100644 (file)
@@ -24,7 +24,7 @@ real bad - it changes the behaviour of all unaligned instructions in user
 space, and might cause programs to fail unexpectedly.
 
 To change the alignment trap behavior, simply echo a number into
-/proc/sys/debug/alignment.  The number is made up from various bits:
+/proc/cpu/alignment.  The number is made up from various bits:
 
 bit            behavior when set
 ---            -----------------
diff --git a/Documentation/blockdev/00-INDEX b/Documentation/blockdev/00-INDEX
new file mode 100644 (file)
index 0000000..86f054c
--- /dev/null
@@ -0,0 +1,16 @@
+00-INDEX
+       - this file
+README.DAC960
+       - info on Mylex DAC960/DAC1100 PCI RAID Controller Driver for Linux.
+cciss.txt
+       - info, major/minor #'s for Compaq's SMART Array Controllers.
+cpqarray.txt
+       - info on using Compaq's SMART2 Intelligent Disk Array Controllers.
+floppy.txt
+       - notes and driver options for the floppy disk driver.
+nbd.txt
+       - info on a TCP implementation of a network block device.
+paride.txt
+       - information about the parallel port IDE subsystem.
+ramdisk.txt
+       - short guide on how to set up and use the RAM disk.
diff --git a/Documentation/c2port.txt b/Documentation/c2port.txt
new file mode 100644 (file)
index 0000000..d9bf93e
--- /dev/null
@@ -0,0 +1,90 @@
+                       C2 port support
+                       ---------------
+
+(C) Copyright 2007 Rodolfo Giometti <giometti@enneenne.com>
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+
+
+Overview
+--------
+
+This driver implements the support for Linux of Silicon Labs (Silabs)
+C2 Interface used for in-system programming of micro controllers.
+
+By using this driver you can reprogram the in-system flash without EC2
+or EC3 debug adapter. This solution is also useful in those systems
+where the micro controller is connected via special GPIOs pins.
+
+References
+----------
+
+The C2 Interface main references are at (http://www.silabs.com)
+Silicon Laboratories site], see:
+
+- AN127: FLASH Programming via the C2 Interface at
+http://www.silabs.com/public/documents/tpub_doc/anote/Microcontrollers/Small_Form_Factor/en/an127.pdf, and
+
+- C2 Specification at
+http://www.silabs.com/public/documents/tpub_doc/spec/Microcontrollers/en/C2spec.pdf,
+
+however it implements a two wire serial communication protocol (bit
+banging) designed to enable in-system programming, debugging, and
+boundary-scan testing on low pin-count Silicon Labs devices. Currently
+this code supports only flash programming but extensions are easy to
+add.
+
+Using the driver
+----------------
+
+Once the driver is loaded you can use sysfs support to get C2port's
+info or read/write in-system flash.
+
+# ls /sys/class/c2port/c2port0/
+access            flash_block_size  flash_erase       rev_id
+dev_id            flash_blocks_num  flash_size        subsystem/
+flash_access      flash_data        reset             uevent
+
+Initially the C2port access is disabled since you hardware may have
+such lines multiplexed with other devices so, to get access to the
+C2port, you need the command:
+
+# echo 1 > /sys/class/c2port/c2port0/access
+
+after that you should read the device ID and revision ID of the
+connected micro controller:
+
+# cat /sys/class/c2port/c2port0/dev_id
+8
+# cat /sys/class/c2port/c2port0/rev_id
+1
+
+However, for security reasons, the in-system flash access in not
+enabled yet, to do so you need the command:
+
+# echo 1 > /sys/class/c2port/c2port0/flash_access
+
+After that you can read the whole flash:
+
+# cat /sys/class/c2port/c2port0/flash_data > image
+
+erase it:
+
+# echo 1 > /sys/class/c2port/c2port0/flash_erase
+
+and write it:
+
+# cat image > /sys/class/c2port/c2port0/flash_data
+
+after writing you have to reset the device to execute the new code:
+
+# echo 1 > /sys/class/c2port/c2port0/reset
index c50ab58..41f37fe 100644 (file)
@@ -1,4 +1,4 @@
-       The cgroup freezer is useful to batch job management system which start
+The cgroup freezer is useful to batch job management system which start
 and stop sets of tasks in order to schedule the resources of a machine
 according to the desires of a system administrator. This sort of program
 is often used on HPC clusters to schedule access to the cluster as a
@@ -6,7 +6,7 @@ whole. The cgroup freezer uses cgroups to describe the set of tasks to
 be started/stopped by the batch job management system. It also provides
 a means to start and stop the tasks composing the job.
 
-       The cgroup freezer will also be useful for checkpointing running groups
+The cgroup freezer will also be useful for checkpointing running groups
 of tasks. The freezer allows the checkpoint code to obtain a consistent
 image of the tasks by attempting to force the tasks in a cgroup into a
 quiescent state. Once the tasks are quiescent another task can
@@ -16,7 +16,7 @@ recoverable error occur. This also allows the checkpointed tasks to be
 migrated between nodes in a cluster by copying the gathered information
 to another node and restarting the tasks there.
 
-       Sequences of SIGSTOP and SIGCONT are not always sufficient for stopping
+Sequences of SIGSTOP and SIGCONT are not always sufficient for stopping
 and resuming tasks in userspace. Both of these signals are observable
 from within the tasks we wish to freeze. While SIGSTOP cannot be caught,
 blocked, or ignored it can be seen by waiting or ptracing parent tasks.
@@ -37,26 +37,29 @@ demonstrate this problem using nested bash shells:
 
        <at this point 16990 exits and causes 16644 to exit too>
 
-       This happens because bash can observe both signals and choose how it
+This happens because bash can observe both signals and choose how it
 responds to them.
 
-       Another example of a program which catches and responds to these
+Another example of a program which catches and responds to these
 signals is gdb. In fact any program designed to use ptrace is likely to
 have a problem with this method of stopping and resuming tasks.
 
-        In contrast, the cgroup freezer uses the kernel freezer code to
+In contrast, the cgroup freezer uses the kernel freezer code to
 prevent the freeze/unfreeze cycle from becoming visible to the tasks
 being frozen. This allows the bash example above and gdb to run as
 expected.
 
-       The freezer subsystem in the container filesystem defines a file named
+The freezer subsystem in the container filesystem defines a file named
 freezer.state. Writing "FROZEN" to the state file will freeze all tasks in the
 cgroup. Subsequently writing "THAWED" will unfreeze the tasks in the cgroup.
 Reading will return the current state.
 
+Note freezer.state doesn't exist in root cgroup, which means root cgroup
+is non-freezable.
+
 * Examples of usage :
 
-   # mkdir /containers/freezer
+   # mkdir /containers
    # mount -t cgroup -ofreezer freezer  /containers
    # mkdir /containers/0
    # echo $some_pid > /containers/0/tasks
@@ -94,6 +97,6 @@ things happens:
                the freezer.state file
        2) Userspace retries the freezing operation by writing "FROZEN" to
                the freezer.state file (writing "FREEZING" is not legal
-               and returns EIO)
+               and returns EINVAL)
        3) The tasks that blocked the cgroup from entering the "FROZEN"
                state disappear from the cgroup's set of tasks.
index 6c442d8..4f3f384 100644 (file)
@@ -23,6 +23,7 @@ Contents:
 1.3 sparc64
 1.4 ppc
 1.5 SuperH
+1.6 Blackfin
 
 2. "Policy" / "Governor"?
 2.1 Policy
@@ -97,6 +98,17 @@ The following SuperH processors are supported by cpufreq:
 SH-3
 SH-4
 
+1.6 Blackfin
+------------
+
+The following Blackfin processors are supported by cpufreq:
+
+BF522, BF523, BF524, BF525, BF526, BF527, Rev 0.1 or higher
+BF531, BF532, BF533, Rev 0.3 or higher
+BF534, BF536, BF537, Rev 0.2 or higher
+BF561, Rev 0.3 or higher
+BF542, BF544, BF547, BF548, BF549, Rev 0.1 or higher
+
 
 2. "Policy" / "Governor" ?
 ==========================
index 05d71b4..1a8af73 100644 (file)
@@ -56,30 +56,6 @@ Who: Mauro Carvalho Chehab <mchehab@infradead.org>
 
 ---------------------------
 
-What:  old tuner-3036 i2c driver
-When:  2.6.28
-Why:   This driver is for VERY old i2c-over-parallel port teletext receiver
-       boxes. Rather then spending effort on converting this driver to V4L2,
-       and since it is extremely unlikely that anyone still uses one of these
-       devices, it was decided to drop it.
-Who:   Hans Verkuil <hverkuil@xs4all.nl>
-       Mauro Carvalho Chehab <mchehab@infradead.org>
-
- ---------------------------
-
-What:   V4L2 dpc7146 driver
-When:   2.6.28
-Why:    Old driver for the dpc7146 demonstration board that is no longer
-       relevant. The last time this was tested on actual hardware was
-       probably around 2002. Since this is a driver for a demonstration
-       board the decision was made to remove it rather than spending a
-       lot of effort continually updating this driver to stay in sync
-       with the latest internal V4L2 or I2C API.
-Who:    Hans Verkuil <hverkuil@xs4all.nl>
-       Mauro Carvalho Chehab <mchehab@infradead.org>
-
----------------------------
-
 What:  PCMCIA control ioctl (needed for pcmcia-cs [cardmgr, cardctl])
 When:  November 2005
 Files: drivers/pcmcia/: pcmcia_ioctl.c
@@ -268,18 +244,6 @@ Who:       Michael Buesch <mb@bu3sch.de>
 
 ---------------------------
 
-What:  init_mm export
-When:  2.6.26
-Why:   Not used in-tree. The current out-of-tree users used it to
-       work around problems in the CPA code which should be resolved
-       by now. One usecase was described to provide verification code
-       of the CPA operation. That's a good idea in general, but such
-       code / infrastructure should be in the kernel and not in some
-       out-of-tree driver.
-Who:   Thomas Gleixner <tglx@linutronix.de>
-
-----------------------------
-
 What:  usedac i386 kernel parameter
 When:  2.6.27
 Why:   replaced by allowdac and no dac combination
index 4340cc8..67310fb 100644 (file)
@@ -28,10 +28,7 @@ Manish Singh  <manish.singh@oracle.com>
 Caveats
 =======
 Features which OCFS2 does not support yet:
-       - extended attributes
        - quotas
-       - cluster aware flock
-       - cluster aware lockf
        - Directory change notification (F_NOTIFY)
        - Distributed Caching (F_SETLEASE/F_GETLEASE/break_lease)
        - POSIX ACLs
index bcceb99..71df353 100644 (file)
@@ -44,6 +44,7 @@ Table of Contents
   2.14 /proc/<pid>/io - Display the IO accounting fields
   2.15 /proc/<pid>/coredump_filter - Core dump filtering settings
   2.16 /proc/<pid>/mountinfo - Information about mounts
+  2.17 /proc/sys/fs/epoll - Configuration options for the epoll interface
 
 ------------------------------------------------------------------------------
 Preface
@@ -1338,10 +1339,13 @@ nmi_watchdog
 
 Enables/Disables the NMI watchdog on x86 systems.  When the value is non-zero
 the NMI watchdog is enabled and will continuously test all online cpus to
-determine whether or not they are still functioning properly.
+determine whether or not they are still functioning properly. Currently,
+passing "nmi_watchdog=" parameter at boot time is required for this function
+to work.
 
-Because the NMI watchdog shares registers with oprofile, by disabling the NMI
-watchdog, oprofile may have more registers to utilize.
+If LAPIC NMI watchdog method is in use (nmi_watchdog=2 kernel parameter), the
+NMI watchdog shares registers with oprofile. By disabling the NMI watchdog,
+oprofile may have more registers to utilize.
 
 msgmni
 ------
@@ -2483,4 +2487,30 @@ For more information on mount propagation see:
 
   Documentation/filesystems/sharedsubtree.txt
 
+2.17   /proc/sys/fs/epoll - Configuration options for the epoll interface
+--------------------------------------------------------
+
+This directory contains configuration options for the epoll(7) interface.
+
+max_user_instances
+------------------
+
+This is the maximum number of epoll file descriptors that a single user can
+have open at a given time. The default value is 128, and should be enough
+for normal users.
+
+max_user_watches
+----------------
+
+Every epoll file descriptor can store a number of files to be monitored
+for event readiness. Each one of these monitored files constitutes a "watch".
+This configuration option sets the maximum number of "watches" that are
+allowed for each user.
+Each "watch" costs roughly 90 bytes on a 32bit kernel, and roughly 160 bytes
+on a 64bit one.
+The current default value for  max_user_watches  is the 1/32 of the available
+low memory, divided for the "watch" cost in bytes.
+
+
 ------------------------------------------------------------------------------
+
index 62fe9b1..a8273d5 100644 (file)
@@ -130,12 +130,12 @@ The 2.6 kernel build process always creates a gzipped cpio format initramfs
 archive and links it into the resulting kernel binary.  By default, this
 archive is empty (consuming 134 bytes on x86).
 
-The config option CONFIG_INITRAMFS_SOURCE (for some reason buried under
-devices->block devices in menuconfig, and living in usr/Kconfig) can be used
-to specify a source for the initramfs archive, which will automatically be
-incorporated into the resulting binary.  This option can point to an existing
-gzipped cpio archive, a directory containing files to be archived, or a text
-file specification such as the following example:
+The config option CONFIG_INITRAMFS_SOURCE (in General Setup in menuconfig,
+and living in usr/Kconfig) can be used to specify a source for the
+initramfs archive, which will automatically be incorporated into the
+resulting binary.  This option can point to an existing gzipped cpio
+archive, a directory containing files to be archived, or a text file
+specification such as the following example:
 
   dir /dev 755 0 0
   nod /dev/console 644 0 0 c 5 1
index 3cc4010..0466ee5 100644 (file)
@@ -39,10 +39,11 @@ The block device operation is optional, these block devices support it as of
 today:
 - dcssblk: s390 dcss block device driver
 
-An address space operation named get_xip_page is used to retrieve reference
-to a struct page. To address the target page, a reference to an address_space,
-and a sector number is provided. A 3rd argument indicates whether the
-function should allocate blocks if needed.
+An address space operation named get_xip_mem is used to retrieve references
+to a page frame number and a kernel address. To obtain these values a reference
+to an address_space is provided. This function assigns values to the kmem and
+pfn parameters. The third argument indicates whether the function should allocate
+blocks if needed.
 
 This address space operation is mutually exclusive with readpage&writepage that
 do page cache read/write operations.
index ea5a827..9cc4d68 100644 (file)
@@ -8,7 +8,7 @@ Copyright 2008 Red Hat Inc.
 Reviewers:   Elias Oltmanns, Randy Dunlap, Andrew Morton,
             John Kacur, and David Teigland.
 
-Written for: 2.6.27-rc1
+Written for: 2.6.28-rc2
 
 Introduction
 ------------
@@ -50,26 +50,26 @@ of ftrace. Here is a list of some of the key files:
 
  Note: all time values are in microseconds.
 
-  current_tracer : This is used to set or display the current tracer
+  current_tracer: This is used to set or display the current tracer
                that is configured.
 
-  available_tracers : This holds the different types of tracers that
+  available_tracers: This holds the different types of tracers that
                have been compiled into the kernel. The tracers
                listed here can be configured by echoing their name
                into current_tracer.
 
-  tracing_enabled : This sets or displays whether the current_tracer
+  tracing_enabled: This sets or displays whether the current_tracer
                is activated and tracing or not. Echo 0 into this
                file to disable the tracer or 1 to enable it.
 
-  trace : This file holds the output of the trace in a human readable
+  trace: This file holds the output of the trace in a human readable
                format (described below).
 
-  latency_trace : This file shows the same trace but the information
+  latency_trace: This file shows the same trace but the information
                is organized more to display possible latencies
                in the system (described below).
 
-  trace_pipe : The output is the same as the "trace" file but this
+  trace_pipe: The output is the same as the "trace" file but this
                file is meant to be streamed with live tracing.
                Reads from this file will block until new data
                is retrieved. Unlike the "trace" and "latency_trace"
@@ -82,11 +82,11 @@ of ftrace. Here is a list of some of the key files:
                tracer is not adding more data, they will display
                the same information every time they are read.
 
-  iter_ctrl : This file lets the user control the amount of data
+  iter_ctrl: This file lets the user control the amount of data
                that is displayed in one of the above output
                files.
 
-  trace_max_latency : Some of the tracers record the max latency.
+  trace_max_latency: Some of the tracers record the max latency.
                For example, the time interrupts are disabled.
                This time is saved in this file. The max trace
                will also be stored, and displayed by either
@@ -94,29 +94,26 @@ of ftrace. Here is a list of some of the key files:
                only be recorded if the latency is greater than
                the value in this file. (in microseconds)
 
-  trace_entries : This sets or displays the number of trace
-               entries each CPU buffer can hold. The tracer buffers
-               are the same size for each CPU. The displayed number
-               is the size of the CPU buffer and not total size. The
+  trace_entries: This sets or displays the number of bytes each CPU
+               buffer can hold. The tracer buffers are the same size
+               for each CPU. The displayed number is the size of the
+                CPU buffer and not total size of all buffers. The
                trace buffers are allocated in pages (blocks of memory
                that the kernel uses for allocation, usually 4 KB in size).
-               Since each entry is smaller than a page, if the last
-               allocated page has room for more entries than were
-               requested, the rest of the page is used to allocate
-               entries.
+               If the last page allocated has room for more bytes
+               than requested, the rest of the page will be used,
+               making the actual allocation bigger than requested.
+               (Note, the size may not be a multiple of the page size due
+               to buffer managment overhead.)
 
                This can only be updated when the current_tracer
-               is set to "none".
+               is set to "nop".
 
-               NOTE: It is planned on changing the allocated buffers
-                     from being the number of possible CPUS to
-                     the number of online CPUS.
-
-  tracing_cpumask : This is a mask that lets the user only trace
+  tracing_cpumask: This is a mask that lets the user only trace
                on specified CPUS. The format is a hex string
                representing the CPUS.
 
-  set_ftrace_filter : When dynamic ftrace is configured in (see the
+  set_ftrace_filter: When dynamic ftrace is configured in (see the
                section below "dynamic ftrace"), the code is dynamically
                modified (code text rewrite) to disable calling of the
                function profiler (mcount). This lets tracing be configured
@@ -130,14 +127,11 @@ of ftrace. Here is a list of some of the key files:
                be traced. If a function exists in both set_ftrace_filter
                and set_ftrace_notrace, the function will _not_ be traced.
 
-  available_filter_functions : When a function is encountered the first
-               time by the dynamic tracer, it is recorded and
-               later the call is converted into a nop. This file
-               lists the functions that have been recorded
-               by the dynamic tracer and these functions can
-               be used to set the ftrace filter by the above
-               "set_ftrace_filter" file. (See the section "dynamic ftrace"
-               below for more details).
+  available_filter_functions: This lists the functions that ftrace
+               has processed and can trace. These are the function
+               names that you can pass to "set_ftrace_filter" or
+               "set_ftrace_notrace". (See the section "dynamic ftrace"
+               below for more details.)
 
 
 The Tracers
@@ -145,7 +139,7 @@ The Tracers
 
 Here is the list of current tracers that may be configured.
 
-  ftrace - function tracer that uses mcount to trace all functions.
+  function - function tracer that uses mcount to trace all functions.
 
   sched_switch - traces the context switches between tasks.
 
@@ -166,8 +160,8 @@ Here is the list of current tracers that may be configured.
                the highest priority task to get scheduled after
                it has been woken up.
 
-  none - This is not a tracer. To remove all tracers from tracing
-               simply echo "none" into current_tracer.
+  nop - This is not a tracer. To remove all tracers from tracing
+               simply echo "nop" into current_tracer.
 
 
 Examples of using the tracer
@@ -182,7 +176,7 @@ Output format:
 Here is an example of the output format of the file "trace"
 
                              --------
-# tracer: ftrace
+# tracer: function
 #
 #           TASK-PID   CPU#    TIMESTAMP  FUNCTION
 #              | |      |          |         |
@@ -192,7 +186,7 @@ Here is an example of the output format of the file "trace"
                              --------
 
 A header is printed with the tracer name that is represented by the trace.
-In this case the tracer is "ftrace". Then a header showing the format. Task
+In this case the tracer is "function". Then a header showing the format. Task
 name "bash", the task PID "4251", the CPU that it was running on
 "01", the timestamp in <secs>.<usecs> format, the function name that was
 traced "path_put" and the parent function that called this function
@@ -1003,22 +997,20 @@ is the stack for the hard interrupt. This hides the fact that NEED_RESCHED
 has been set. We do not see the 'N' until we switch back to the task's
 assigned stack.
 
-ftrace
-------
+function
+--------
 
-ftrace is not only the name of the tracing infrastructure, but it
-is also a name of one of the tracers. The tracer is the function
-tracer. Enabling the function tracer can be done from the
-debug file system. Make sure the ftrace_enabled is set otherwise
-this tracer is a nop.
+This tracer is the function tracer. Enabling the function tracer
+can be done from the debug file system. Make sure the ftrace_enabled is
+set; otherwise this tracer is a nop.
 
  # sysctl kernel.ftrace_enabled=1
- # echo ftrace > /debug/tracing/current_tracer
+ # echo function > /debug/tracing/current_tracer
  # echo 1 > /debug/tracing/tracing_enabled
  # usleep 1
  # echo 0 > /debug/tracing/tracing_enabled
  # cat /debug/tracing/trace
-# tracer: ftrace
+# tracer: function
 #
 #           TASK-PID   CPU#    TIMESTAMP  FUNCTION
 #              | |      |          |         |
@@ -1040,10 +1032,10 @@ this tracer is a nop.
 [...]
 
 
-Note: ftrace uses ring buffers to store the above entries. The newest data
-may overwrite the oldest data. Sometimes using echo to stop the trace
-is not sufficient because the tracing could have overwritten the data
-that you wanted to record. For this reason, it is sometimes better to
+Note: function tracer uses ring buffers to store the above entries.
+The newest data may overwrite the oldest data. Sometimes using echo to
+stop the trace is not sufficient because the tracing could have overwritten
+the data that you wanted to record. For this reason, it is sometimes better to
 disable tracing directly from a program. This allows you to stop the
 tracing at the point that you hit the part that you are interested in.
 To disable the tracing directly from a C program, something like following
@@ -1077,18 +1069,31 @@ every kernel function, produced by the -pg switch in gcc), starts
 of pointing to a simple return. (Enabling FTRACE will include the
 -pg switch in the compiling of the kernel.)
 
-When dynamic ftrace is initialized, it calls kstop_machine to make
-the machine act like a uniprocessor so that it can freely modify code
-without worrying about other processors executing that same code.  At
-initialization, the mcount calls are changed to call a "record_ip"
-function.  After this, the first time a kernel function is called,
-it has the calling address saved in a hash table.
-
-Later on the ftraced kernel thread is awoken and will again call
-kstop_machine if new functions have been recorded. The ftraced thread
-will change all calls to mcount to "nop".  Just calling mcount
-and having mcount return has shown a 10% overhead. By converting
-it to a nop, there is no measurable overhead to the system.
+At compile time every C file object is run through the
+recordmcount.pl script (located in the scripts directory). This
+script will process the C object using objdump to find all the
+locations in the .text section that call mcount. (Note, only
+the .text section is processed, since processing other sections
+like .init.text may cause races due to those sections being freed).
+
+A new section called "__mcount_loc" is created that holds references
+to all the mcount call sites in the .text section. This section is
+compiled back into the original object. The final linker will add
+all these references into a single table.
+
+On boot up, before SMP is initialized, the dynamic ftrace code
+scans this table and updates all the locations into nops. It also
+records the locations, which are added to the available_filter_functions
+list.  Modules are processed as they are loaded and before they are
+executed.  When a module is unloaded, it also removes its functions from
+the ftrace function list. This is automatic in the module unload
+code, and the module author does not need to worry about it.
+
+When tracing is enabled, kstop_machine is called to prevent races
+with the CPUS executing code being modified (which can cause the
+CPU to do undesireable things), and the nops are patched back
+to calls. But this time, they do not call mcount (which is just
+a function stub). They now call into the ftrace infrastructure.
 
 One special side-effect to the recording of the functions being
 traced is that we can now selectively choose which functions we
@@ -1251,36 +1256,6 @@ Produces:
 
 We can see that there's no more lock or preempt tracing.
 
-ftraced
--------
-
-As mentioned above, when dynamic ftrace is configured in, a kernel
-thread wakes up once a second and checks to see if there are mcount
-calls that need to be converted into nops. If there are not any, then
-it simply goes back to sleep. But if there are some, it will call
-kstop_machine to convert the calls to nops.
-
-There may be a case in which you do not want this added latency.
-Perhaps you are doing some audio recording and this activity might
-cause skips in the playback. There is an interface to disable
-and enable the "ftraced" kernel thread.
-
- # echo 0 > /debug/tracing/ftraced_enabled
-
-This will disable the calling of kstop_machine to update the
-mcount calls to nops. Remember that there is a large overhead
-to calling mcount. Without this kernel thread, that overhead will
-exist.
-
-If there are recorded calls to mcount, any write to the ftraced_enabled
-file will cause the kstop_machine to run. This means that a
-user can manually perform the updates when they want to by simply
-echoing a '0' into the ftraced_enabled file.
-
-The updates are also done at the beginning of enabling a tracer
-that uses ftrace function recording.
-
-
 trace_pipe
 ----------
 
@@ -1289,14 +1264,14 @@ on the tracing is different. Every read from trace_pipe is consumed.
 This means that subsequent reads will be different. The trace
 is live.
 
- # echo ftrace > /debug/tracing/current_tracer
+ # echo function > /debug/tracing/current_tracer
  # cat /debug/tracing/trace_pipe > /tmp/trace.out &
 [1] 4153
  # echo 1 > /debug/tracing/tracing_enabled
  # usleep 1
  # echo 0 > /debug/tracing/tracing_enabled
  # cat /debug/tracing/trace
-# tracer: ftrace
+# tracer: function
 #
 #           TASK-PID   CPU#    TIMESTAMP  FUNCTION
 #              | |      |          |         |
@@ -1317,7 +1292,7 @@ is live.
 
 Note, reading the trace_pipe file will block until more input is added.
 By changing the tracer, trace_pipe will issue an EOF. We needed
-to set the ftrace tracer _before_ cating the trace_pipe file.
+to set the function tracer _before_ we "cat" the trace_pipe file.
 
 
 trace entries
@@ -1334,10 +1309,10 @@ number of entries.
 65620
 
 Note, to modify this, you must have tracing completely disabled. To do that,
-echo "none" into the current_tracer. If the current_tracer is not set
-to "none", an EINVAL error will be returned.
+echo "nop" into the current_tracer. If the current_tracer is not set
+to "nop", an EINVAL error will be returned.
 
- # echo none > /debug/tracing/current_tracer
+ # echo nop > /debug/tracing/current_tracer
  # echo 100000 > /debug/tracing/trace_entries
  # cat /debug/tracing/trace_entries
 100045
diff --git a/Documentation/hwmon/adt7462 b/Documentation/hwmon/adt7462
new file mode 100644 (file)
index 0000000..ec660b3
--- /dev/null
@@ -0,0 +1,67 @@
+Kernel driver adt7462
+======================
+
+Supported chips:
+  * Analog Devices ADT7462
+    Prefix: 'adt7462'
+    Addresses scanned: I2C 0x58, 0x5C
+    Datasheet: Publicly available at the Analog Devices website
+
+Author: Darrick J. Wong
+
+Description
+-----------
+
+This driver implements support for the Analog Devices ADT7462 chip family.
+
+This chip is a bit of a beast.  It has 8 counters for measuring fan speed.  It
+can also measure 13 voltages or 4 temperatures, or various combinations of the
+two.  See the chip documentation for more details about the exact set of
+configurations.  This driver does not allow one to configure the chip; that is
+left to the system designer.
+
+A sophisticated control system for the PWM outputs is designed into the ADT7462
+that allows fan speed to be adjusted automatically based on any of the three
+temperature sensors. Each PWM output is individually adjustable and
+programmable. Once configured, the ADT7462 will adjust the PWM outputs in
+response to the measured temperatures without further host intervention.  This
+feature can also be disabled for manual control of the PWM's.
+
+Each of the measured inputs (voltage, temperature, fan speed) has
+corresponding high/low limit values. The ADT7462 will signal an ALARM if
+any measured value exceeds either limit.
+
+The ADT7462 samples all inputs continuously. The driver will not read
+the registers more often than once every other second. Further,
+configuration data is only read once per minute.
+
+Special Features
+----------------
+
+The ADT7462 have a 10-bit ADC and can therefore measure temperatures
+with 0.25 degC resolution.
+
+The Analog Devices datasheet is very detailed and describes a procedure for
+determining an optimal configuration for the automatic PWM control.
+
+The driver will report sensor labels when it is able to determine that
+information from the configuration registers.
+
+Configuration Notes
+-------------------
+
+Besides standard interfaces driver adds the following:
+
+* PWM Control
+
+* pwm#_auto_point1_pwm and temp#_auto_point1_temp and
+* pwm#_auto_point2_pwm and temp#_auto_point2_temp -
+
+point1: Set the pwm speed at a lower temperature bound.
+point2: Set the pwm speed at a higher temperature bound.
+
+The ADT7462 will scale the pwm between the lower and higher pwm speed when
+the temperature is between the two temperature boundaries.  PWM values range
+from 0 (off) to 255 (full speed).  Fan speed will be set to maximum when the
+temperature sensor associated with the PWM control exceeds temp#_max.
+
diff --git a/Documentation/hwmon/lis3lv02d b/Documentation/hwmon/lis3lv02d
new file mode 100644 (file)
index 0000000..65dfb0c
--- /dev/null
@@ -0,0 +1,49 @@
+Kernel driver lis3lv02d
+==================
+
+Supported chips:
+
+  * STMicroelectronics LIS3LV02DL and LIS3LV02DQ
+
+Author:
+        Yan Burman <burman.yan@gmail.com>
+       Eric Piel <eric.piel@tremplin-utc.net>
+
+
+Description
+-----------
+
+This driver provides support for the accelerometer found in various HP laptops
+sporting the feature officially called "HP Mobile Data Protection System 3D" or
+"HP 3D DriveGuard". It detect automatically laptops with this sensor. Known models
+(for now the HP 2133, nc6420, nc2510, nc8510, nc84x0, nw9440 and nx9420) will
+have their axis automatically oriented on standard way (eg: you can directly
+play neverball).  The accelerometer data is readable via
+/sys/devices/platform/lis3lv02d.
+
+Sysfs attributes under /sys/devices/platform/lis3lv02d/:
+position - 3D position that the accelerometer reports. Format: "(x,y,z)"
+calibrate - read: values (x, y, z) that are used as the base for input class device operation.
+            write: forces the base to be recalibrated with the current position.
+rate - reports the sampling rate of the accelerometer device in HZ
+
+This driver also provides an absolute input class device, allowing
+the laptop to act as a pinball machine-esque joystick.
+
+Axes orientation
+----------------
+
+For better compatibility between the various laptops. The values reported by
+the accelerometer are converted into a "standard" organisation of the axes
+(aka "can play neverball out of the box"):
+ * When the laptop is horizontal the position reported is about 0 for X and Y
+and a positive value for Z
+ * If the left side is elevated, X increases (becomes positive)
+ * If the front side (where the touchpad is) is elevated, Y decreases (becomes negative)
+ * If the laptop is put upside-down, Z becomes negative
+
+If your laptop model is not recognized (cf "dmesg"), you can send an email to the
+authors to add it to the database.  When reporting a new laptop, please include
+the output of "dmidecode" plus the value of /sys/devices/platform/lis3lv02d/position
+in these four cases.
+
diff --git a/Documentation/ics932s401 b/Documentation/ics932s401
new file mode 100644 (file)
index 0000000..07a739f
--- /dev/null
@@ -0,0 +1,31 @@
+Kernel driver ics932s401
+======================
+
+Supported chips:
+  * IDT ICS932S401
+    Prefix: 'ics932s401'
+    Addresses scanned: I2C 0x69
+    Datasheet: Publically available at the IDT website
+
+Author: Darrick J. Wong
+
+Description
+-----------
+
+This driver implements support for the IDT ICS932S401 chip family.
+
+This chip has 4 clock outputs--a base clock for the CPU (which is likely
+multiplied to get the real CPU clock), a system clock, a PCI clock, a USB
+clock, and a reference clock.  The driver reports selected and actual
+frequency.  If spread spectrum mode is enabled, the driver also reports by what
+percent the clock signal is being spread, which should be between 0 and -0.5%.
+All frequencies are reported in KHz.
+
+The ICS932S401 monitors all inputs continuously. The driver will not read
+the registers more often than once every other second.
+
+Special Features
+----------------
+
+The clocks could be reprogrammed to increase system speed.  I will not help you
+do this, as you risk damaging your system!
index 81905e8..7f8b9d9 100644 (file)
@@ -20,10 +20,11 @@ pressed or released a BUTTON_IRQ happens. The driver could look like:
 
 static struct input_dev *button_dev;
 
-static void button_interrupt(int irq, void *dummy, struct pt_regs *fp)
+static irqreturn_t button_interrupt(int irq, void *dummy)
 {
        input_report_key(button_dev, BTN_0, inb(BUTTON_PORT) & 1);
        input_sync(button_dev);
+       return IRQ_HANDLED;
 }
 
 static int __init button_init(void)
diff --git a/Documentation/ioctl/00-INDEX b/Documentation/ioctl/00-INDEX
new file mode 100644 (file)
index 0000000..d2fe4d4
--- /dev/null
@@ -0,0 +1,10 @@
+00-INDEX
+       - this file
+cdrom.txt
+       - summary of CDROM ioctl calls
+hdio.txt
+       - summary of HDIO_ ioctl calls
+ioctl-decoding.txt
+       - how to decode the bits of an IOCTL code
+ioctl-number.txt
+       - how to implement and register device/driver ioctl calls
index c86c074..d5418d5 100644 (file)
@@ -198,59 +198,42 @@ and is between 256 and 4096 characters. It is defined in the file
                        that require a timer override, but don't have
                        HPET
 
-       acpi.debug_layer=       [HW,ACPI]
+       acpi_backlight= [HW,ACPI]
+                       acpi_backlight=vendor
+                       acpi_backlight=video
+                       If set to vendor, prefer vendor specific driver
+                       (e.g. thinkpad_acpi, sony_acpi, etc.) instead
+                       of the ACPI video.ko driver.
+
+       acpi_display_output=    [HW,ACPI]
+                       acpi_display_output=vendor
+                       acpi_display_output=video
+                       See above.
+
+       acpi.debug_layer=       [HW,ACPI,ACPI_DEBUG]
+       acpi.debug_level=       [HW,ACPI,ACPI_DEBUG]
                        Format: <int>
-                       Each bit of the <int> indicates an ACPI debug layer,
-                       1: enable, 0: disable. It is useful for boot time
-                       debugging. After system has booted up, it can be set
-&n