[PATCH] pcmcia: OMAP CF controller
David Brownell [Fri, 9 Sep 2005 20:03:28 +0000 (13:03 -0700)]
This adds a socket driver for the OMAP CF controller; it's currently in use on
OSK boards.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

drivers/pcmcia/Kconfig
drivers/pcmcia/Makefile
drivers/pcmcia/omap_cf.c [new file with mode: 0644]

index 6485f75..ddc741e 100644 (file)
@@ -221,6 +221,13 @@ config PCMCIA_VRC4173
        tristate "NEC VRC4173 CARDU support"
        depends on CPU_VR41XX && PCI && PCMCIA
 
+config OMAP_CF
+       tristate "OMAP CompactFlash Controller"
+       depends on PCMCIA && ARCH_OMAP16XX
+       help
+         Say Y here to support the CompactFlash controller on OMAP.
+         Note that this doesn't support "True IDE" mode.
+
 config PCCARD_NONSTATIC
        tristate
 
index ef694c7..a41fbb3 100644 (file)
@@ -34,6 +34,7 @@ obj-$(CONFIG_M32R_CFC)                                += m32r_cfc.o
 obj-$(CONFIG_PCMCIA_AU1X00)                    += au1x00_ss.o
 obj-$(CONFIG_PCMCIA_VRC4171)                   += vrc4171_card.o
 obj-$(CONFIG_PCMCIA_VRC4173)                   += vrc4173_cardu.o
+obj-$(CONFIG_OMAP_CF)                          += omap_cf.o
 
 sa11xx_core-y                                  += soc_common.o sa11xx_base.o
 pxa2xx_core-y                                  += soc_common.o pxa2xx_base.o
diff --git a/drivers/pcmcia/omap_cf.c b/drivers/pcmcia/omap_cf.c
new file mode 100644 (file)
index 0000000..08d1c92
--- /dev/null
@@ -0,0 +1,373 @@
+/*
+ * omap_cf.c -- OMAP 16xx CompactFlash controller driver
+ *
+ * Copyright (c) 2005 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+
+#include <pcmcia/ss.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/mach-types.h>
+#include <asm/sizes.h>
+
+#include <asm/arch/mux.h>
+#include <asm/arch/tc.h>
+
+
+/* NOTE:  don't expect this to support many I/O cards.  The 16xx chips have
+ * hard-wired timings to support Compact Flash memory cards; they won't work
+ * with various other devices (like WLAN adapters) without some external
+ * logic to help out.
+ *
+ * NOTE:  CF controller docs disagree with address space docs as to where
+ * CF_BASE really lives; this is a doc erratum.
+ */
+#define        CF_BASE 0xfffe2800
+
+/* status; read after IRQ */
+#define CF_STATUS_REG          __REG16(CF_BASE + 0x00)
+#      define  CF_STATUS_BAD_READ      (1 << 2)
+#      define  CF_STATUS_BAD_WRITE     (1 << 1)
+#      define  CF_STATUS_CARD_DETECT   (1 << 0)
+
+/* which chipselect (CS0..CS3) is used for CF (active low) */
+#define CF_CFG_REG             __REG16(CF_BASE + 0x02)
+
+/* card reset */
+#define CF_CONTROL_REG         __REG16(CF_BASE + 0x04)
+#      define  CF_CONTROL_RESET        (1 << 0)
+
+#define omap_cf_present() (!(CF_STATUS_REG & CF_STATUS_CARD_DETECT))
+
+/*--------------------------------------------------------------------------*/
+
+static const char driver_name[] = "omap_cf";
+
+struct omap_cf_socket {
+       struct pcmcia_socket    socket;
+
+       struct timer_list       timer;
+       unsigned                present:1;
+       unsigned                active:1;
+
+       struct platform_device  *pdev;
+       unsigned long           phys_cf;
+       u_int                   irq;
+};
+
+#define        POLL_INTERVAL           (2 * HZ)
+
+#define        SZ_2K                   (2 * SZ_1K)
+
+/*--------------------------------------------------------------------------*/
+
+static int omap_cf_ss_init(struct pcmcia_socket *s)
+{
+       return 0;
+}
+
+/* the timer is primarily to kick this socket's pccardd */
+static void omap_cf_timer(unsigned long _cf)
+{
+       struct omap_cf_socket   *cf = (void *) _cf;
+       unsigned                present = omap_cf_present();
+
+       if (present != cf->present) {
+               cf->present = present;
+               pr_debug("%s: card %s\n", driver_name,
+                       present ? "present" : "gone");
+               pcmcia_parse_events(&cf->socket, SS_DETECT);
+       }
+
+       if (cf->active)
+               mod_timer(&cf->timer, jiffies + POLL_INTERVAL);
+}
+
+/* This irq handler prevents "irqNNN: nobody cared" messages as drivers
+ * claim the card's IRQ.  It may also detect some card insertions, but
+ * not removals; it can't always eliminate timer irqs.
+ */
+static irqreturn_t omap_cf_irq(int irq, void *_cf, struct pt_regs *r)
+{
+       omap_cf_timer((unsigned long)_cf);
+       return IRQ_HANDLED;
+}
+
+static int omap_cf_get_status(struct pcmcia_socket *s, u_int *sp)
+{
+       if (!sp)
+               return -EINVAL;
+
+       /* FIXME power management should probably be board-specific:
+        *  - 3VCARD vs XVCARD (OSK only handles 3VCARD)
+        *  - POWERON (switched on/off by set_socket)
+        */
+       if (omap_cf_present()) {
+               struct omap_cf_socket   *cf;
+
+               *sp = SS_READY | SS_DETECT | SS_POWERON | SS_3VCARD;
+               cf = container_of(s, struct omap_cf_socket, socket);
+               s->irq.AssignedIRQ = cf->irq;
+       } else
+               *sp = 0;
+       return 0;
+}
+
+static int
+omap_cf_set_socket(struct pcmcia_socket *sock, struct socket_state_t *s)
+{
+       u16             control;
+
+       /* FIXME some non-OSK boards will support power switching */
+       switch (s->Vcc) {
+       case 0:
+       case 33:
+               break;
+       default:
+               return -EINVAL;
+       }
+
+       control = CF_CONTROL_REG;
+       if (s->flags & SS_RESET)
+               CF_CONTROL_REG = CF_CONTROL_RESET;
+       else
+               CF_CONTROL_REG = 0;
+
+       pr_debug("%s: Vcc %d, io_irq %d, flags %04x csc %04x\n",
+               driver_name, s->Vcc, s->io_irq, s->flags, s->csc_mask);
+
+       return 0;
+}
+
+static int omap_cf_ss_suspend(struct pcmcia_socket *s)
+{
+       pr_debug("%s: %s\n", driver_name, __FUNCTION__);
+       return omap_cf_set_socket(s, &dead_socket);
+}
+
+/* regions are 2K each:  mem, attrib, io (and reserved-for-ide) */
+
+static int
+omap_cf_set_io_map(struct pcmcia_socket *s, struct pccard_io_map *io)
+{
+       struct omap_cf_socket   *cf;
+
+       cf = container_of(s, struct omap_cf_socket, socket);
+       io->flags &= MAP_ACTIVE|MAP_ATTRIB|MAP_16BIT;
+       io->start = cf->phys_cf + SZ_4K;
+       io->stop = io->start + SZ_2K - 1;
+       return 0;
+}
+
+static int
+omap_cf_set_mem_map(struct pcmcia_socket *s, struct pccard_mem_map *map)
+{
+       struct omap_cf_socket   *cf;
+
+       if (map->card_start)
+               return -EINVAL;
+       cf = container_of(s, struct omap_cf_socket, socket);
+       map->static_start = cf->phys_cf;
+       map->flags &= MAP_ACTIVE|MAP_ATTRIB|MAP_16BIT;
+       if (map->flags & MAP_ATTRIB)
+               map->static_start += SZ_2K;
+       return 0;
+}
+
+static struct pccard_operations omap_cf_ops = {
+       .init                   = omap_cf_ss_init,
+       .suspend                = omap_cf_ss_suspend,
+       .get_status             = omap_cf_get_status,
+       .set_socket             = omap_cf_set_socket,
+       .set_io_map             = omap_cf_set_io_map,
+       .set_mem_map            = omap_cf_set_mem_map,
+};
+
+/*--------------------------------------------------------------------------*/
+
+/*
+ * NOTE:  right now the only board-specific platform_data is
+ * "what chipselect is used".  Boards could want more.
+ */
+
+static int __init omap_cf_probe(struct device *dev)
+{
+       unsigned                seg;
+       struct omap_cf_socket   *cf;
+       struct platform_device  *pdev = to_platform_device(dev);
+       int                     irq;
+       int                     status;
+
+       seg = (int) dev->platform_data;
+       if (seg == 0 || seg > 3)
+               return -ENODEV;
+
+       /* either CFLASH.IREQ (INT_1610_CF) or some GPIO */
+       irq = platform_get_irq(pdev, 0);
+       if (!irq)
+               return -EINVAL;
+
+       cf = kcalloc(1, sizeof *cf, GFP_KERNEL);
+       if (!cf)
+               return -ENOMEM;
+       init_timer(&cf->timer);
+       cf->timer.function = omap_cf_timer;
+       cf->timer.data = (unsigned long) cf;
+
+       cf->pdev = pdev;
+       dev_set_drvdata(dev, cf);
+
+       /* this primarily just shuts up irq handling noise */
+       status = request_irq(irq, omap_cf_irq, SA_SHIRQ,
+                       driver_name, cf);
+       if (status < 0)
+               goto fail0;
+       cf->irq = irq;
+       cf->socket.pci_irq = irq;
+
+       switch (seg) {
+       /* NOTE: CS0 could be configured too ... */
+       case 1:
+               cf->phys_cf = OMAP_CS1_PHYS;
+               break;
+       case 2:
+               cf->phys_cf = OMAP_CS2_PHYS;
+               break;
+       case 3:
+               cf->phys_cf = omap_cs3_phys();
+               break;
+       default:
+               goto  fail1;
+       }
+
+       /* pcmcia layer only remaps "real" memory */
+       cf->socket.io_offset = (unsigned long)
+                       ioremap(cf->phys_cf + SZ_4K, SZ_2K);
+       if (!cf->socket.io_offset)
+               goto fail1;
+
+       if (!request_mem_region(cf->phys_cf, SZ_8K, driver_name))
+               goto fail1;
+
+       /* NOTE:  CF conflicts with MMC1 */
+       omap_cfg_reg(W11_1610_CF_CD1);
+       omap_cfg_reg(P11_1610_CF_CD2);
+       omap_cfg_reg(R11_1610_CF_IOIS16);
+       omap_cfg_reg(V10_1610_CF_IREQ);
+       omap_cfg_reg(W10_1610_CF_RESET);
+
+       CF_CFG_REG = ~(1 << seg);
+
+       pr_info("%s: cs%d on irq %d\n", driver_name, seg, irq);
+
+       /* NOTE:  better EMIFS setup might support more cards; but the
+        * TRM only shows how to affect regular flash signals, not their
+        * CF/PCMCIA variants...
+        */
+       pr_debug("%s: cs%d, previous ccs %08x acs %08x\n", driver_name,
+                       seg, EMIFS_CCS(seg), EMIFS_ACS(seg));
+       EMIFS_CCS(seg) = 0x0004a1b3;    /* synch mode 4 etc */
+       EMIFS_ACS(seg) = 0x00000000;    /* OE hold/setup */
+
+       /* CF uses armxor_ck, which is "always" available */
+
+       pr_debug("%s: sts %04x cfg %04x control %04x %s\n", driver_name,
+               CF_STATUS_REG, CF_CFG_REG, CF_CONTROL_REG,
+               omap_cf_present() ? "present" : "(not present)");
+
+       cf->socket.owner = THIS_MODULE;
+       cf->socket.dev.dev = dev;
+       cf->socket.ops = &omap_cf_ops;
+       cf->socket.resource_ops = &pccard_static_ops;
+       cf->socket.features = SS_CAP_PCCARD | SS_CAP_STATIC_MAP
+                               | SS_CAP_MEM_ALIGN;
+       cf->socket.map_size = SZ_2K;
+
+       status = pcmcia_register_socket(&cf->socket);
+       if (status < 0)
+               goto fail2;
+
+       cf->active = 1;
+       mod_timer(&cf->timer, jiffies + POLL_INTERVAL);
+       return 0;
+
+fail2:
+       iounmap((void __iomem *) cf->socket.io_offset);
+       release_mem_region(cf->phys_cf, SZ_8K);
+fail1:
+       free_irq(irq, cf);
+fail0:
+       kfree(cf);
+       return status;
+}
+
+static int __devexit omap_cf_remove(struct device *dev)
+{
+       struct omap_cf_socket *cf = dev_get_drvdata(dev);
+
+       cf->active = 0;
+       pcmcia_unregister_socket(&cf->socket);
+       del_timer_sync(&cf->timer);
+       iounmap((void __iomem *) cf->socket.io_offset);
+       release_mem_region(cf->phys_cf, SZ_8K);
+       free_irq(cf->irq, cf);
+       kfree(cf);
+       return 0;
+}
+
+static int omap_cf_suspend(struct device *dev, pm_message_t mesg, u32 level)
+{
+       if (level != SUSPEND_SAVE_STATE)
+               return 0;
+       return pcmcia_socket_dev_suspend(dev, mesg);
+}
+
+static int omap_cf_resume(struct device *dev, u32 level)
+{
+       if (level != RESUME_RESTORE_STATE)
+               return 0;
+       return pcmcia_socket_dev_resume(dev);
+}
+
+static struct device_driver omap_cf_driver = {
+       .name           = (char *) driver_name,
+       .bus            = &platform_bus_type,
+       .probe          = omap_cf_probe,
+       .remove         = __devexit_p(omap_cf_remove),
+       .suspend        = omap_cf_suspend,
+       .resume         = omap_cf_resume,
+};
+
+static int __init omap_cf_init(void)
+{
+       if (cpu_is_omap16xx())
+               driver_register(&omap_cf_driver);
+       return 0;
+}
+
+static void __exit omap_cf_exit(void)
+{
+       if (cpu_is_omap16xx())
+               driver_unregister(&omap_cf_driver);
+}
+
+module_init(omap_cf_init);
+module_exit(omap_cf_exit);
+
+MODULE_DESCRIPTION("OMAP CF Driver");
+MODULE_LICENSE("GPL");