powerpc/85xx: Add eSDHC support for MPC8536DS boards
Anton Vorontsov [Tue, 18 Aug 2009 23:38:18 +0000 (03:38 +0400)]
This patch simply adds sdhci node to the device tree.

We specify clock-frequency manually, so that eSDHC will work without
upgrading U-Boot. Though, that'll only work for default setup (1500
MHz) on new board revisions. For non-default setups, it's recommended
to upgrade U-Boot, since it will fixup clock-frequency automatically.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

arch/powerpc/boot/dts/mpc8536ds.dts
arch/powerpc/boot/dts/mpc8536ds_36b.dts

index 22caf69..815cebb 100644 (file)
                        phy_type = "ulpi";
                };
 
+               sdhci@2e000 {
+                       compatible = "fsl,mpc8536-esdhc", "fsl,esdhc";
+                       reg = <0x2e000 0x1000>;
+                       interrupts = <72 0x2>;
+                       interrupt-parent = <&mpic>;
+                       clock-frequency = <250000000>;
+               };
+
                serial0: serial@4500 {
                        cell-index = <0>;
                        device_type = "serial";
index 113ed8b..d95b260 100644 (file)
                        phy_type = "ulpi";
                };
 
+               sdhci@2e000 {
+                       compatible = "fsl,mpc8536-esdhc", "fsl,esdhc";
+                       reg = <0x2e000 0x1000>;
+                       interrupts = <72 0x2>;
+                       interrupt-parent = <&mpic>;
+                       clock-frequency = <250000000>;
+               };
+
                serial0: serial@4500 {
                        cell-index = <0>;
                        device_type = "serial";