[ARM] mmp2: add handling on PMIC IRQ
Haojian Zhuang [Wed, 3 Feb 2010 15:01:18 +0000 (10:01 -0500)]
Since PMIC INT pin is a special pin of CPU, the status of PMIC INT pin needs
to be cleared after PMIC IRQ occured. Now append the clear operation in
irq chip handler.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

arch/arm/mach-mmp/common.h
arch/arm/mach-mmp/irq-mmp2.c
arch/arm/mach-mmp/mmp2.c

index 18c037f..b4a0ba0 100644 (file)
@@ -3,6 +3,7 @@
 struct sys_timer;
 
 extern void timer_init(int irq);
+extern void mmp2_clear_pmic_int(void);
 
 extern struct sys_timer pxa168_timer;
 extern struct sys_timer pxa910_timer;
index 3ae1c54..b187c02 100644 (file)
@@ -42,6 +42,12 @@ static struct irq_chip icu_irq_chip = {
        .unmask         = icu_unmask_irq,
 };
 
+static void pmic_irq_ack(unsigned int irq)
+{
+       if (irq == IRQ_MMP2_PMIC)
+               mmp2_clear_pmic_int();
+}
+
 #define SECOND_IRQ_MASK(_name_, irq_base, prefix)                      \
 static void _name_##_mask_irq(unsigned int irq)                                \
 {                                                                      \
@@ -82,7 +88,6 @@ SECOND_IRQ_DEMUX(_name_, irq_base, prefix)                            \
 static struct irq_chip _name_##_irq_chip = {                           \
        .name           = #_name_,                                      \
        .mask           = _name_##_mask_irq,                            \
-       .mask_ack       = _name_##_mask_irq,                            \
        .unmask         = _name_##_unmask_irq,                          \
 }
 
@@ -126,6 +131,11 @@ void __init mmp2_init_icu(void)
                }
        }
 
+       /* NOTE: IRQ_MMP2_PMIC requires the PMIC MFPR register
+        * to be written to clear the interrupt
+        */
+       pmic_irq_chip.ack = pmic_irq_ack;
+
        init_mux_irq(&pmic_irq_chip, IRQ_MMP2_PMIC_BASE, 2);
        init_mux_irq(&rtc_irq_chip, IRQ_MMP2_RTC_BASE, 2);
        init_mux_irq(&twsi_irq_chip, IRQ_MMP2_TWSI_BASE, 5);
index 0f1c441..72eb9da 100644 (file)
@@ -37,6 +37,16 @@ static struct mfp_addr_map mmp2_addr_map[] __initdata = {
        MFP_ADDR_END,
 };
 
+void mmp2_clear_pmic_int(void)
+{
+       unsigned long mfpr_pmic, data;
+
+       mfpr_pmic = APB_VIRT_BASE + 0x1e000 + 0x2c4;
+       data = __raw_readl(mfpr_pmic);
+       __raw_writel(data | (1 << 6), mfpr_pmic);
+       __raw_writel(data, mfpr_pmic);
+}
+
 static void __init mmp2_init_gpio(void)
 {
        int i;