cpuidle: Make cpuidle_enable_device() call poll_idle_init()
Rafael J. Wysocki [Fri, 7 Jan 2011 23:29:20 +0000 (00:29 +0100)]
The following scenario is possible with the current cpuidle code and
the ACPI cpuidle driver:
(1) acpi_processor_cst_has_changed() is called,
(2) cpuidle_disable_device() is called,
(3) cpuidle_remove_state_sysfs() is called to remove the (presumably
    outdated) states info from sysfs,
(3) acpi_processor_get_power_info() is called, the first entry in the
    pr->power.states[] table is filled with zeros,
(4) acpi_processor_setup_cpuidle() is called and it doesn't fill the
    first entry in pr->power.states[],
(5) cpuidle_enable_device() is called,
(6) __cpuidle_register_device() is _not_ called, since the device has
    already been registered,
(7) Consequently, poll_idle_init() is _not_ called either,
(8) cpuidle_add_state_sysfs() is called to create the sysfs attributes
    for the new states and it uses the bogus first table entry from
    acpi_processor_get_power_info() for creating state0.

This problem is avoided if cpuidle_enable_device()
unconditionally calls poll_idle_init().

Reported-by: Len Brown <len.brown@intel.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
cc: stable@kernel.org

drivers/cpuidle/cpuidle.c

index a507108..97df791 100644 (file)
@@ -154,6 +154,45 @@ void cpuidle_resume_and_unlock(void)
 
 EXPORT_SYMBOL_GPL(cpuidle_resume_and_unlock);
 
+#ifdef CONFIG_ARCH_HAS_CPU_RELAX
+static int poll_idle(struct cpuidle_device *dev, struct cpuidle_state *st)
+{
+       ktime_t t1, t2;
+       s64 diff;
+       int ret;
+
+       t1 = ktime_get();
+       local_irq_enable();
+       while (!need_resched())
+               cpu_relax();
+
+       t2 = ktime_get();
+       diff = ktime_to_us(ktime_sub(t2, t1));
+       if (diff > INT_MAX)
+               diff = INT_MAX;
+
+       ret = (int) diff;
+       return ret;
+}
+
+static void poll_idle_init(struct cpuidle_device *dev)
+{
+       struct cpuidle_state *state = &dev->states[0];
+
+       cpuidle_set_statedata(state, NULL);
+
+       snprintf(state->name, CPUIDLE_NAME_LEN, "C0");
+       snprintf(state->desc, CPUIDLE_DESC_LEN, "CPUIDLE CORE POLL IDLE");
+       state->exit_latency = 0;
+       state->target_residency = 0;
+       state->power_usage = -1;
+       state->flags = CPUIDLE_FLAG_POLL;
+       state->enter = poll_idle;
+}
+#else
+static void poll_idle_init(struct cpuidle_device *dev) {}
+#endif /* CONFIG_ARCH_HAS_CPU_RELAX */
+
 /**
  * cpuidle_enable_device - enables idle PM for a CPU
  * @dev: the CPU
@@ -178,6 +217,8 @@ int cpuidle_enable_device(struct cpuidle_device *dev)
                        return ret;
        }
 
+       poll_idle_init(dev);
+
        if ((ret = cpuidle_add_state_sysfs(dev)))
                return ret;
 
@@ -232,45 +273,6 @@ void cpuidle_disable_device(struct cpuidle_device *dev)
 
 EXPORT_SYMBOL_GPL(cpuidle_disable_device);
 
-#ifdef CONFIG_ARCH_HAS_CPU_RELAX
-static int poll_idle(struct cpuidle_device *dev, struct cpuidle_state *st)
-{
-       ktime_t t1, t2;
-       s64 diff;
-       int ret;
-
-       t1 = ktime_get();
-       local_irq_enable();
-       while (!need_resched())
-               cpu_relax();
-
-       t2 = ktime_get();
-       diff = ktime_to_us(ktime_sub(t2, t1));
-       if (diff > INT_MAX)
-               diff = INT_MAX;
-
-       ret = (int) diff;
-       return ret;
-}
-
-static void poll_idle_init(struct cpuidle_device *dev)
-{
-       struct cpuidle_state *state = &dev->states[0];
-
-       cpuidle_set_statedata(state, NULL);
-
-       snprintf(state->name, CPUIDLE_NAME_LEN, "C0");
-       snprintf(state->desc, CPUIDLE_DESC_LEN, "CPUIDLE CORE POLL IDLE");
-       state->exit_latency = 0;
-       state->target_residency = 0;
-       state->power_usage = -1;
-       state->flags = CPUIDLE_FLAG_POLL;
-       state->enter = poll_idle;
-}
-#else
-static void poll_idle_init(struct cpuidle_device *dev) {}
-#endif /* CONFIG_ARCH_HAS_CPU_RELAX */
-
 /**
  * __cpuidle_register_device - internal register function called before register
  * and enable routines
@@ -291,8 +293,6 @@ static int __cpuidle_register_device(struct cpuidle_device *dev)
 
        init_completion(&dev->kobj_unregister);
 
-       poll_idle_init(dev);
-
        /*
         * cpuidle driver should set the dev->power_specified bit
         * before registering the device if the driver provides