uml: remove the dead TTY_LOG code
Adrian Bunk [Thu, 16 Oct 2008 05:01:22 +0000 (22:01 -0700)]
Remove the dead CONFIG_TTY_LOG (no kconfig option).

Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

arch/um/kernel/exec.c
arch/um/os-Linux/Makefile
arch/um/os-Linux/tty_log.c [deleted file]

index f5d7f45..598711c 100644 (file)
@@ -42,23 +42,11 @@ void start_thread(struct pt_regs *regs, unsigned long eip, unsigned long esp)
        PT_REGS_SP(regs) = esp;
 }
 
-#ifdef CONFIG_TTY_LOG
-extern void log_exec(char **argv, void *tty);
-#endif
-
 static long execve1(char *file, char __user * __user *argv,
                    char __user *__user *env)
 {
        long error;
-#ifdef CONFIG_TTY_LOG
-       struct tty_struct *tty;
 
-       mutex_lock(&tty_mutex);
-       tty = get_current_tty();
-       if (tty)
-               log_exec(argv, tty);
-       mutex_unlock(&tty_mutex);
-#endif
        error = do_execve(file, argv, env, &current->thread.regs);
        if (error == 0) {
                task_lock(current);
index 8a48d6a..d66f038 100644 (file)
@@ -7,9 +7,6 @@ obj-y = aio.o elf_aux.o execvp.o file.o helper.o irq.o main.o mem.o process.o \
        registers.o sigio.o signal.o start_up.o time.o tty.o uaccess.o \
        umid.o tls.o user_syms.o util.o drivers/ sys-$(SUBARCH)/ skas/
 
-obj-$(CONFIG_TTY_LOG) += tty_log.o
-user-objs-$(CONFIG_TTY_LOG) += tty_log.o
-
 USER_OBJS := $(user-objs-y) aio.o elf_aux.o execvp.o file.o helper.o irq.o \
        main.o mem.o process.o registers.o sigio.o signal.o start_up.o time.o \
        tty.o tls.o uaccess.o umid.o util.o
diff --git a/arch/um/os-Linux/tty_log.c b/arch/um/os-Linux/tty_log.c
deleted file mode 100644 (file)
index cc648e6..0000000
+++ /dev/null
@@ -1,217 +0,0 @@
-/*
- * Copyright (C) 2002 Jeff Dike (jdike@karaya.com) and
- * geoffrey hing <ghing@net.ohio-state.edu>
- * Licensed under the GPL
- */
-
-#include <errno.h>
-#include <string.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <sys/time.h>
-#include "init.h"
-#include "user.h"
-#include "os.h"
-
-#define TTY_LOG_DIR "./"
-
-/* Set early in boot and then unchanged */
-static char *tty_log_dir = TTY_LOG_DIR;
-static int tty_log_fd = -1;
-
-#define TTY_LOG_OPEN 1
-#define TTY_LOG_CLOSE 2
-#define TTY_LOG_WRITE 3
-#define TTY_LOG_EXEC 4
-
-#define TTY_READ 1
-#define TTY_WRITE 2
-
-struct tty_log_buf {
-       int what;
-       unsigned long tty;
-       int len;
-       int direction;
-       unsigned long sec;
-       unsigned long usec;
-};
-
-int open_tty_log(void *tty, void *current_tty)
-{
-       struct timeval tv;
-       struct tty_log_buf data;
-       char buf[strlen(tty_log_dir) + sizeof("01234567890-01234567\0")];
-       int fd;
-
-       gettimeofday(&tv, NULL);
-       if(tty_log_fd != -1){
-               data = ((struct tty_log_buf) { .what    = TTY_LOG_OPEN,
-                                              .tty  = (unsigned long) tty,
-                                              .len  = sizeof(current_tty),
-                                              .direction = 0,
-                                              .sec = tv.tv_sec,
-                                              .usec = tv.tv_usec } );
-               write(tty_log_fd, &data, sizeof(data));
-               write(tty_log_fd, &current_tty, data.len);
-               return tty_log_fd;
-       }
-
-       sprintf(buf, "%s/%0u-%0u", tty_log_dir, (unsigned int) tv.tv_sec,
-               (unsigned int) tv.tv_usec);
-
-       fd = os_open_file(buf, of_append(of_create(of_rdwr(OPENFLAGS()))),
-                         0644);
-       if(fd < 0){
-               printk("open_tty_log : couldn't open '%s', errno = %d\n",
-                      buf, -fd);
-       }
-       return fd;
-}
-
-void close_tty_log(int fd, void *tty)
-{
-       struct tty_log_buf data;
-       struct timeval tv;
-
-       if(tty_log_fd != -1){
-               gettimeofday(&tv, NULL);
-               data = ((struct tty_log_buf) { .what    = TTY_LOG_CLOSE,
-                                              .tty  = (unsigned long) tty,
-                                              .len  = 0,
-                                              .direction = 0,
-                                              .sec = tv.tv_sec,
-                                              .usec = tv.tv_usec } );
-               write(tty_log_fd, &data, sizeof(data));
-               return;
-       }
-       os_close_file(fd);
-}
-
-static int log_chunk(int fd, const char *buf, int len)
-{
-       int total = 0, try, missed, n;
-       char chunk[64];
-
-       while(len > 0){
-               try = (len > sizeof(chunk)) ? sizeof(chunk) : len;
-               missed = copy_from_user_proc(chunk, (char *) buf, try);
-               try -= missed;
-               n = write(fd, chunk, try);
-               if(n != try) {
-                       if(n < 0)
-                               return -errno;
-                       return -EIO;
-               }
-               if(missed != 0)
-                       return -EFAULT;
-
-               len -= try;
-               total += try;
-               buf += try;
-       }
-
-       return total;
-}
-
-int write_tty_log(int fd, const char *buf, int len, void *tty, int is_read)
-{
-       struct timeval tv;
-       struct tty_log_buf data;
-       int direction;
-
-       if(fd == tty_log_fd){
-               gettimeofday(&tv, NULL);
-               direction = is_read ? TTY_READ : TTY_WRITE;
-               data = ((struct tty_log_buf) { .what    = TTY_LOG_WRITE,
-                                              .tty  = (unsigned long) tty,
-                                              .len  = len,
-                                              .direction = direction,
-                                              .sec = tv.tv_sec,
-                                              .usec = tv.tv_usec } );
-               write(tty_log_fd, &data, sizeof(data));
-       }
-
-       return log_chunk(fd, buf, len);
-}
-
-void log_exec(char **argv, void *tty)
-{
-       struct timeval tv;
-       struct tty_log_buf data;
-       char **ptr,*arg;
-       int len;
-
-       if(tty_log_fd == -1) return;
-
-       gettimeofday(&tv, NULL);
-
-       len = 0;
-       for(ptr = argv; ; ptr++){
-               if(copy_from_user_proc(&arg, ptr, sizeof(arg)))
-                       return;
-               if(arg == NULL) break;
-               len += strlen_user_proc(arg);
-       }
-
-       data = ((struct tty_log_buf) { .what    = TTY_LOG_EXEC,
-                                      .tty  = (unsigned long) tty,
-                                      .len  = len,
-                                      .direction = 0,
-                                      .sec = tv.tv_sec,
-                                      .usec = tv.tv_usec } );
-       write(tty_log_fd, &data, sizeof(data));
-
-       for(ptr = argv; ; ptr++){
-               if(copy_from_user_proc(&arg, ptr, sizeof(arg)))
-                       return;
-               if(arg == NULL) break;
-               log_chunk(tty_log_fd, arg, strlen_user_proc(arg));
-       }
-}
-
-extern void register_tty_logger(int (*opener)(void *, void *),
-                               int (*writer)(int, const char *, int,
-                                             void *, int),
-                               void (*closer)(int, void *));
-
-static int register_logger(void)
-{
-       register_tty_logger(open_tty_log, write_tty_log, close_tty_log);
-       return 0;
-}
-
-__uml_initcall(register_logger);
-
-static int __init set_tty_log_dir(char *name, int *add)
-{
-       tty_log_dir = name;
-       return 0;
-}
-
-__uml_setup("tty_log_dir=", set_tty_log_dir,
-"tty_log_dir=<directory>\n"
-"    This is used to specify the directory where the logs of all pty\n"
-"    data from this UML machine will be written.\n\n"
-);
-
-static int __init set_tty_log_fd(char *name, int *add)
-{
-       char *end;
-
-       tty_log_fd = strtoul(name, &end, 0);
-       if((*end != '\0') || (end == name)){
-               printf("set_tty_log_fd - strtoul failed on '%s'\n", name);
-               tty_log_fd = -1;
-       }
-
-       *add = 0;
-       return 0;
-}
-
-__uml_setup("tty_log_fd=", set_tty_log_fd,
-"tty_log_fd=<fd>\n"
-"    This is used to specify a preconfigured file descriptor to which all\n"
-"    tty data will be written.  Preconfigure the descriptor with something\n"
-"    like '10>tty_log tty_log_fd=10'.\n\n"
-);