USB: Add USB 3.0 roothub support to USB core.
Sarah Sharp [Tue, 28 Apr 2009 02:55:01 +0000 (19:55 -0700)]
Add USB 3.0 root hub descriptors.  This is a kludge because I reused the old
USB 2.0 descriptors, instead of using the new USB 3.0 hub descriptors with
endpoint companion descriptors and other descriptors.  I did this because I
wasn't ready to add USB 3.0 hub changes to khubd.  For now, a USB 3.0 roothub
looks like a USB 2.0 roothub, with a higher speed.

USB 3.0 hubs have no transaction translator (TT).

Make USB core debugging handle super speed ports.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/usb/core/hcd.c
drivers/usb/core/hub.c
drivers/usb/core/hub.h

index 120bb56..823744d 100644 (file)
@@ -128,6 +128,27 @@ static inline int is_root_hub(struct usb_device *udev)
 #define KERNEL_REL     ((LINUX_VERSION_CODE >> 16) & 0x0ff)
 #define KERNEL_VER     ((LINUX_VERSION_CODE >> 8) & 0x0ff)
 
+/* usb 3.0 root hub device descriptor */
+static const u8 usb3_rh_dev_descriptor[18] = {
+       0x12,       /*  __u8  bLength; */
+       0x01,       /*  __u8  bDescriptorType; Device */
+       0x00, 0x03, /*  __le16 bcdUSB; v3.0 */
+
+       0x09,       /*  __u8  bDeviceClass; HUB_CLASSCODE */
+       0x00,       /*  __u8  bDeviceSubClass; */
+       0x03,       /*  __u8  bDeviceProtocol; USB 3.0 hub */
+       0x09,       /*  __u8  bMaxPacketSize0; 2^9 = 512 Bytes */
+
+       0x6b, 0x1d, /*  __le16 idVendor; Linux Foundation */
+       0x02, 0x00, /*  __le16 idProduct; device 0x0002 */
+       KERNEL_VER, KERNEL_REL, /*  __le16 bcdDevice */
+
+       0x03,       /*  __u8  iManufacturer; */
+       0x02,       /*  __u8  iProduct; */
+       0x01,       /*  __u8  iSerialNumber; */
+       0x01        /*  __u8  bNumConfigurations; */
+};
+
 /* usb 2.0 root hub device descriptor */
 static const u8 usb2_rh_dev_descriptor [18] = {
        0x12,       /*  __u8  bLength; */
@@ -273,6 +294,47 @@ static const u8 hs_rh_config_descriptor [] = {
        0x0c        /*  __u8  ep_bInterval; (256ms -- usb 2.0 spec) */
 };
 
+static const u8 ss_rh_config_descriptor[] = {
+       /* one configuration */
+       0x09,       /*  __u8  bLength; */
+       0x02,       /*  __u8  bDescriptorType; Configuration */
+       0x19, 0x00, /*  __le16 wTotalLength; FIXME */
+       0x01,       /*  __u8  bNumInterfaces; (1) */
+       0x01,       /*  __u8  bConfigurationValue; */
+       0x00,       /*  __u8  iConfiguration; */
+       0xc0,       /*  __u8  bmAttributes;
+                                Bit 7: must be set,
+                                    6: Self-powered,
+                                    5: Remote wakeup,
+                                    4..0: resvd */
+       0x00,       /*  __u8  MaxPower; */
+
+       /* one interface */
+       0x09,       /*  __u8  if_bLength; */
+       0x04,       /*  __u8  if_bDescriptorType; Interface */
+       0x00,       /*  __u8  if_bInterfaceNumber; */
+       0x00,       /*  __u8  if_bAlternateSetting; */
+       0x01,       /*  __u8  if_bNumEndpoints; */
+       0x09,       /*  __u8  if_bInterfaceClass; HUB_CLASSCODE */
+       0x00,       /*  __u8  if_bInterfaceSubClass; */
+       0x00,       /*  __u8  if_bInterfaceProtocol; */
+       0x00,       /*  __u8  if_iInterface; */
+
+       /* one endpoint (status change endpoint) */
+       0x07,       /*  __u8  ep_bLength; */
+       0x05,       /*  __u8  ep_bDescriptorType; Endpoint */
+       0x81,       /*  __u8  ep_bEndpointAddress; IN Endpoint 1 */
+       0x03,       /*  __u8  ep_bmAttributes; Interrupt */
+                   /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8)
+                    * see hub.c:hub_configure() for details. */
+       (USB_MAXCHILDREN + 1 + 7) / 8, 0x00,
+       0x0c        /*  __u8  ep_bInterval; (256ms -- usb 2.0 spec) */
+       /*
+        * All 3.0 hubs should have an endpoint companion descriptor,
+        * but we're ignoring that for now.  FIXME?
+        */
+};
+
 /*-------------------------------------------------------------------------*/
 
 /*
@@ -426,7 +488,9 @@ static int rh_call_control (struct usb_hcd *hcd, struct urb *urb)
        case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
                switch (wValue & 0xff00) {
                case USB_DT_DEVICE << 8:
-                       if (hcd->driver->flags & HCD_USB2)
+                       if (hcd->driver->flags & HCD_USB3)
+                               bufp = usb3_rh_dev_descriptor;
+                       else if (hcd->driver->flags & HCD_USB2)
                                bufp = usb2_rh_dev_descriptor;
                        else if (hcd->driver->flags & HCD_USB11)
                                bufp = usb11_rh_dev_descriptor;
@@ -437,7 +501,10 @@ static int rh_call_control (struct usb_hcd *hcd, struct urb *urb)
                                patch_protocol = 1;
                        break;
                case USB_DT_CONFIG << 8:
-                       if (hcd->driver->flags & HCD_USB2) {
+                       if (hcd->driver->flags & HCD_USB3) {
+                               bufp = ss_rh_config_descriptor;
+                               len = sizeof ss_rh_config_descriptor;
+                       } else if (hcd->driver->flags & HCD_USB2) {
                                bufp = hs_rh_config_descriptor;
                                len = sizeof hs_rh_config_descriptor;
                        } else {
index fa0208e..f3fe8df 100644 (file)
@@ -155,6 +155,8 @@ static inline char *portspeed(int portstatus)
                return "480 Mb/s";
        else if (portstatus & (1 << USB_PORT_FEAT_LOWSPEED))
                return "1.5 Mb/s";
+       else if (portstatus & (1 << USB_PORT_FEAT_SUPERSPEED))
+               return "5.0 Gb/s";
        else
                return "12 Mb/s";
 }
@@ -951,6 +953,9 @@ static int hub_configure(struct usb_hub *hub,
                                        ret);
                        hub->tt.hub = hdev;
                        break;
+               case 3:
+                       /* USB 3.0 hubs don't have a TT */
+                       break;
                default:
                        dev_dbg(hub_dev, "Unrecognized hub protocol %d\n",
                                hdev->descriptor.bDeviceProtocol);
index 2a116ce..889c0f3 100644 (file)
 #define USB_PORT_FEAT_L1               5       /* L1 suspend */
 #define USB_PORT_FEAT_POWER            8
 #define USB_PORT_FEAT_LOWSPEED         9
+/* This value was never in Table 11-17 */
 #define USB_PORT_FEAT_HIGHSPEED                10
+/* This value is also fake */
+#define USB_PORT_FEAT_SUPERSPEED       11
 #define USB_PORT_FEAT_C_CONNECTION     16
 #define USB_PORT_FEAT_C_ENABLE         17
 #define USB_PORT_FEAT_C_SUSPEND                18